summaryrefslogtreecommitdiffstats
path: root/drivers/parisc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parisc')
-rw-r--r--drivers/parisc/asp.c6
-rw-r--r--drivers/parisc/ccio-dma.c142
-rw-r--r--drivers/parisc/ccio-rm-dma.c2
-rw-r--r--drivers/parisc/dino.c42
-rw-r--r--drivers/parisc/eisa.c4
-rw-r--r--drivers/parisc/gsc.c11
-rw-r--r--drivers/parisc/hppb.c10
-rw-r--r--drivers/parisc/iosapic.c2
-rw-r--r--drivers/parisc/lasi.c4
-rw-r--r--drivers/parisc/lba_pci.c14
-rw-r--r--drivers/parisc/led.c225
-rw-r--r--drivers/parisc/pdc_stable.c2
-rw-r--r--drivers/parisc/sba_iommu.c164
-rw-r--r--drivers/parisc/superio.c3
-rw-r--r--drivers/parisc/wax.c2
15 files changed, 364 insertions, 269 deletions
diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c
index 388609967133..558420bc9f88 100644
--- a/drivers/parisc/asp.c
+++ b/drivers/parisc/asp.c
@@ -77,12 +77,12 @@ asp_init_chip(struct parisc_device *dev)
struct gsc_irq gsc_irq;
int ret;
- asp.version = gsc_readb(dev->hpa + ASP_VER_OFFSET) & 0xf;
+ asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf;
asp.name = (asp.version == 1) ? "Asp" : "Cutoff";
asp.hpa = ASP_INTERRUPT_ADDR;
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
- asp.name, asp.version, dev->hpa);
+ asp.name, asp.version, dev->hpa.start);
/* the IRQ ASP should use */
ret = -EBUSY;
@@ -126,7 +126,7 @@ static struct parisc_device_id asp_tbl[] = {
};
struct parisc_driver asp_driver = {
- .name = "Asp",
+ .name = "asp",
.id_table = asp_tbl,
.probe = asp_init_chip,
};
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index a3bd91a61827..9e0229f7e25f 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -100,9 +100,9 @@
#define DBG_RUN_SG(x...)
#endif
-#define CCIO_INLINE /* inline */
-#define WRITE_U32(value, addr) gsc_writel(value, (u32 *)(addr))
-#define READ_U32(addr) gsc_readl((u32 *)(addr))
+#define CCIO_INLINE inline
+#define WRITE_U32(value, addr) __raw_writel(value, addr)
+#define READ_U32(addr) __raw_readl(addr)
#define U2_IOA_RUNWAY 0x580
#define U2_BC_GSC 0x501
@@ -115,28 +115,28 @@
struct ioa_registers {
/* Runway Supervisory Set */
- volatile int32_t unused1[12];
- volatile uint32_t io_command; /* Offset 12 */
- volatile uint32_t io_status; /* Offset 13 */
- volatile uint32_t io_control; /* Offset 14 */
- volatile int32_t unused2[1];
+ int32_t unused1[12];
+ uint32_t io_command; /* Offset 12 */
+ uint32_t io_status; /* Offset 13 */
+ uint32_t io_control; /* Offset 14 */
+ int32_t unused2[1];
/* Runway Auxiliary Register Set */
- volatile uint32_t io_err_resp; /* Offset 0 */
- volatile uint32_t io_err_info; /* Offset 1 */
- volatile uint32_t io_err_req; /* Offset 2 */
- volatile uint32_t io_err_resp_hi; /* Offset 3 */
- volatile uint32_t io_tlb_entry_m; /* Offset 4 */
- volatile uint32_t io_tlb_entry_l; /* Offset 5 */
- volatile uint32_t unused3[1];
- volatile uint32_t io_pdir_base; /* Offset 7 */
- volatile uint32_t io_io_low_hv; /* Offset 8 */
- volatile uint32_t io_io_high_hv; /* Offset 9 */
- volatile uint32_t unused4[1];
- volatile uint32_t io_chain_id_mask; /* Offset 11 */
- volatile uint32_t unused5[2];
- volatile uint32_t io_io_low; /* Offset 14 */
- volatile uint32_t io_io_high; /* Offset 15 */
+ uint32_t io_err_resp; /* Offset 0 */
+ uint32_t io_err_info; /* Offset 1 */
+ uint32_t io_err_req; /* Offset 2 */
+ uint32_t io_err_resp_hi; /* Offset 3 */
+ uint32_t io_tlb_entry_m; /* Offset 4 */
+ uint32_t io_tlb_entry_l; /* Offset 5 */
+ uint32_t unused3[1];
+ uint32_t io_pdir_base; /* Offset 7 */
+ uint32_t io_io_low_hv; /* Offset 8 */
+ uint32_t io_io_high_hv; /* Offset 9 */
+ uint32_t unused4[1];
+ uint32_t io_chain_id_mask; /* Offset 11 */
+ uint32_t unused5[2];
+ uint32_t io_io_low; /* Offset 14 */
+ uint32_t io_io_high; /* Offset 15 */
};
/*
@@ -226,7 +226,7 @@ struct ioa_registers {
*/
struct ioc {
- struct ioa_registers *ioc_hpa; /* I/O MMU base address */
+ struct ioa_registers __iomem *ioc_regs; /* I/O MMU base address */
u8 *res_map; /* resource map, bit == pdir entry */
u64 *pdir_base; /* physical base address */
u32 pdir_size; /* bytes, function of IOV Space size */
@@ -595,7 +595,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
** Grab virtual index [0:11]
** Deposit virt_idx bits into I/O PDIR word
*/
- asm volatile ("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
+ asm volatile ("lci %%r0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
asm volatile ("extru %1,19,12,%0" : "+r" (ci) : "r" (ci));
asm volatile ("depw %1,15,12,%0" : "+r" (pa) : "r" (ci));
@@ -613,7 +613,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
** the real mode coherence index generation of U2, the PDIR entry
** must be flushed to memory to retain coherence."
*/
- asm volatile("fdc 0(%0)" : : "r" (pdir_ptr));
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
asm volatile("sync");
}
@@ -636,7 +636,7 @@ ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt)
byte_cnt += chain_size;
while(byte_cnt > chain_size) {
- WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_hpa->io_command);
+ WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_regs->io_command);
iovp += chain_size;
byte_cnt -= chain_size;
}
@@ -684,7 +684,7 @@ ccio_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
** Hopefully someone figures out how to patch (NOP) the
** FDC/SYNC out at boot time.
*/
- asm volatile("fdc 0(%0)" : : "r" (pdir_ptr[7]));
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr[7]));
iovp += IOVP_SIZE;
byte_cnt -= IOVP_SIZE;
@@ -1251,7 +1251,7 @@ static struct parisc_device_id ccio_tbl[] = {
static int ccio_probe(struct parisc_device *dev);
static struct parisc_driver ccio_driver = {
- .name = "U2:Uturn",
+ .name = "ccio",
.id_table = ccio_tbl,
.probe = ccio_probe,
};
@@ -1314,14 +1314,13 @@ ccio_ioc_init(struct ioc *ioc)
ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
- BUG_ON(ioc->pdir_size >= 4 * 1024 * 1024); /* max pdir size < 4MB */
+ BUG_ON(ioc->pdir_size > 8 * 1024 * 1024); /* max pdir size <= 8MB */
/* Verify it's a power of two */
BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT));
- DBG_INIT("%s() hpa 0x%lx mem %luMB IOV %dMB (%d bits)\n",
- __FUNCTION__,
- ioc->ioc_hpa,
+ DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits)\n",
+ __FUNCTION__, ioc->ioc_regs,
(unsigned long) num_physpages >> (20 - PAGE_SHIFT),
iova_space_size>>20,
iov_order + PAGE_SHIFT);
@@ -1329,13 +1328,12 @@ ccio_ioc_init(struct ioc *ioc)
ioc->pdir_base = (u64 *)__get_free_pages(GFP_KERNEL,
get_order(ioc->pdir_size));
if(NULL == ioc->pdir_base) {
- panic("%s:%s() could not allocate I/O Page Table\n", __FILE__,
- __FUNCTION__);
+ panic("%s() could not allocate I/O Page Table\n", __FUNCTION__);
}
memset(ioc->pdir_base, 0, ioc->pdir_size);
BUG_ON((((unsigned long)ioc->pdir_base) & PAGE_MASK) != (unsigned long)ioc->pdir_base);
- DBG_INIT(" base %p", ioc->pdir_base);
+ DBG_INIT(" base %p\n", ioc->pdir_base);
/* resource map size dictated by pdir_size */
ioc->res_size = (ioc->pdir_size / sizeof(u64)) >> 3;
@@ -1344,8 +1342,7 @@ ccio_ioc_init(struct ioc *ioc)
ioc->res_map = (u8 *)__get_free_pages(GFP_KERNEL,
get_order(ioc->res_size));
if(NULL == ioc->res_map) {
- panic("%s:%s() could not allocate resource map\n", __FILE__,
- __FUNCTION__);
+ panic("%s() could not allocate resource map\n", __FUNCTION__);
}
memset(ioc->res_map, 0, ioc->res_size);
@@ -1366,44 +1363,58 @@ ccio_ioc_init(struct ioc *ioc)
** Initialize IOA hardware
*/
WRITE_U32(CCIO_CHAINID_MASK << ioc->chainid_shift,
- &ioc->ioc_hpa->io_chain_id_mask);
+ &ioc->ioc_regs->io_chain_id_mask);
WRITE_U32(virt_to_phys(ioc->pdir_base),
- &ioc->ioc_hpa->io_pdir_base);
+ &ioc->ioc_regs->io_pdir_base);
/*
** Go to "Virtual Mode"
*/
- WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_hpa->io_control);
+ WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_regs->io_control);
/*
** Initialize all I/O TLB entries to 0 (Valid bit off).
*/
- WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_m);
- WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_l);
+ WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_m);
+ WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_l);
for(i = 1 << CCIO_CHAINID_SHIFT; i ; i--) {
WRITE_U32((CMD_TLB_DIRECT_WRITE | (i << ioc->chainid_shift)),
- &ioc->ioc_hpa->io_command);
+ &ioc->ioc_regs->io_command);
}
}
static void
-ccio_init_resource(struct resource *res, char *name, unsigned long ioaddr)
+ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr)
{
int result;
res->parent = NULL;
res->flags = IORESOURCE_MEM;
- res->start = (unsigned long)(signed) __raw_readl(ioaddr) << 16;
- res->end = (unsigned long)(signed) (__raw_readl(ioaddr + 4) << 16) - 1;
+ /*
+ * bracing ((signed) ...) are required for 64bit kernel because
+ * we only want to sign extend the lower 16 bits of the register.
+ * The upper 16-bits of range registers are hardcoded to 0xffff.
+ */
+ res->start = (unsigned long)((signed) READ_U32(ioaddr) << 16);
+ res->end = (unsigned long)((signed) (READ_U32(ioaddr + 4) << 16) - 1);
res->name = name;
+ /*
+ * Check if this MMIO range is disable
+ */
if (res->end + 1 == res->start)
return;
- result = request_resource(&iomem_resource, res);
+
+ /* On some platforms (e.g. K-Class), we have already registered
+ * resources for devices reported by firmware. Some are children
+ * of ccio.
+ * "insert" ccio ranges in the mmio hierarchy (/proc/iomem).
+ */
+ result = insert_resource(&iomem_resource, res);
if (result < 0) {
- printk(KERN_ERR "%s: failed to claim CCIO bus address space (%08lx,%08lx)\n",
- __FILE__, res->start, res->end);
+ printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n",
+ __FUNCTION__, res->start, res->end);
}
}
@@ -1414,9 +1425,8 @@ static void __init ccio_init_resources(struct ioc *ioc)
sprintf(name, "GSC Bus [%d/]", ioc->hw_path);
- ccio_init_resource(res, name, (unsigned long)&ioc->ioc_hpa->io_io_low);
- ccio_init_resource(res + 1, name,
- (unsigned long)&ioc->ioc_hpa->io_io_low_hv);
+ ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low);
+ ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv);
}
static int new_ioc_area(struct resource *res, unsigned long size,
@@ -1427,7 +1437,12 @@ static int new_ioc_area(struct resource *res, unsigned long size,
res->start = (max - size + 1) &~ (align - 1);
res->end = res->start + size;
- if (!request_resource(&iomem_resource, res))
+
+ /* We might be trying to expand the MMIO range to include
+ * a child device that has already registered it's MMIO space.
+ * Use "insert" instead of request_resource().
+ */
+ if (!insert_resource(&iomem_resource, res))
return 0;
return new_ioc_area(res, size, min, max - size, align);
@@ -1486,15 +1501,15 @@ int ccio_allocate_resource(const struct parisc_device *dev,
if (!expand_ioc_area(parent, size, min, max, align)) {
__raw_writel(((parent->start)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_low));
+ &ioc->ioc_regs->io_io_low);
__raw_writel(((parent->end)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_high));
+ &ioc->ioc_regs->io_io_high);
} else if (!expand_ioc_area(parent + 1, size, min, max, align)) {
parent++;
__raw_writel(((parent->start)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_low_hv));
+ &ioc->ioc_regs->io_io_low_hv);
__raw_writel(((parent->end)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_high_hv));
+ &ioc->ioc_regs->io_io_high_hv);
} else {
return -EBUSY;
}
@@ -1521,7 +1536,12 @@ int ccio_request_resource(const struct parisc_device *dev,
return -EBUSY;
}
- return request_resource(parent, res);
+ /* "transparent" bus bridges need to register MMIO resources
+ * firmware assigned them. e.g. children of hppb.c (e.g. K-class)
+ * registered their resources in the PDC "bus walk" (See
+ * arch/parisc/kernel/inventory.c).
+ */
+ return insert_resource(parent, res);
}
/**
@@ -1546,7 +1566,7 @@ static int ccio_probe(struct parisc_device *dev)
ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn";
- printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa);
+ printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa.start);
for (i = 0; i < ioc_count; i++) {
ioc_p = &(*ioc_p)->next;
@@ -1554,7 +1574,7 @@ static int ccio_probe(struct parisc_device *dev)
*ioc_p = ioc;
ioc->hw_path = dev->hw_path;
- ioc->ioc_hpa = (struct ioa_registers *)dev->hpa;
+ ioc->ioc_regs = ioremap(dev->hpa.start, 4096);
ccio_ioc_init(ioc);
ccio_init_resources(ioc);
hppa_dma_ops = &ccio_ops;
diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c
index 57e6385976e2..356b8357bccc 100644
--- a/drivers/parisc/ccio-rm-dma.c
+++ b/drivers/parisc/ccio-rm-dma.c
@@ -167,7 +167,7 @@ ccio_probe(struct parisc_device *dev)
{
printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME,
dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn",
- dev->hpa);
+ dev->hpa.start);
/*
** FIXME - should check U2 registers to verify it's really running
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 2f2dbef2c3b7..5ab75334c579 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -178,6 +178,8 @@ static int dino_cfg_read(struct pci_bus *bus, unsigned int devfn, int where,
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
+ DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+ size);
spin_lock_irqsave(&d->dinosaur_pen, flags);
/* tell HW which CFG address */
@@ -211,6 +213,8 @@ static int dino_cfg_write(struct pci_bus *bus, unsigned int devfn, int where,
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
+ DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+ size);
spin_lock_irqsave(&d->dinosaur_pen, flags);
/* avoid address stepping feature */
@@ -295,7 +299,7 @@ static void dino_disable_irq(unsigned int irq)
struct dino_device *dino_dev = irq_desc[irq].handler_data;
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq);
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq);
+ DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
/* Clear the matching bit in the IMR register */
dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
@@ -308,7 +312,7 @@ static void dino_enable_irq(unsigned int irq)
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq);
u32 tmp;
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq);
+ DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
/*
** clear pending IRQ bits
@@ -490,7 +494,7 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr)
if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB)))
break;
}
- DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %lx\n",
+ DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %p\n",
i, res->start, base_addr + DINO_IO_ADDR_EN);
__raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN);
}
@@ -683,6 +687,14 @@ static void __init
dino_card_init(struct dino_device *dino_dev)
{
u32 brdg_feat = 0x00784e05;
+ unsigned long status;
+
+ status = __raw_readl(dino_dev->hba.base_addr+DINO_IO_STATUS);
+ if (status & 0x0000ff80) {
+ __raw_writel(0x00000005,
+ dino_dev->hba.base_addr+DINO_IO_COMMAND);
+ udelay(1);
+ }
__raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK);
__raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN);
@@ -902,15 +914,15 @@ void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp);
** If so, initialize the chip appropriately (card-mode vs bridge mode).
** Much of the initialization is common though.
*/
-static int __init
-dino_driver_callback(struct parisc_device *dev)
+static int __init dino_probe(struct parisc_device *dev)
{
struct dino_device *dino_dev; // Dino specific control struct
const char *version = "unknown";
char *name;
int is_cujo = 0;
struct pci_bus *bus;
-
+ unsigned long hpa = dev->hpa.start;
+
name = "Dino";
if (is_card_dino(&dev->id)) {
version = "3.x (card mode)";
@@ -928,11 +940,11 @@ dino_driver_callback(struct parisc_device *dev)
}
}
- printk("%s version %s found at 0x%lx\n", name, version, dev->hpa);
+ printk("%s version %s found at 0x%lx\n", name, version, hpa);
- if (!request_mem_region(dev->hpa, PAGE_SIZE, name)) {
+ if (!request_mem_region(hpa, PAGE_SIZE, name)) {
printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n",
- dev->hpa);
+ hpa);
return 1;
}
@@ -940,12 +952,12 @@ dino_driver_callback(struct parisc_device *dev)
if (is_cujo && dev->id.hversion_rev == 1) {
#ifdef CONFIG_IOMMU_CCIO
printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n");
- if (dev->hpa == (unsigned long)CUJO_RAVEN_ADDR) {
+ if (hpa == (unsigned long)CUJO_RAVEN_ADDR) {
ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE);
- } else if (dev->hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
+ } else if (hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE);
} else {
- printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", dev->hpa);
+ printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa);
}
#endif
} else if (!is_cujo && !is_card_dino(&dev->id) &&
@@ -970,7 +982,7 @@ dino_driver_callback(struct parisc_device *dev)
memset(dino_dev, 0, sizeof(struct dino_device));
dino_dev->hba.dev = dev;
- dino_dev->hba.base_addr = ioremap(dev->hpa, 4096); /* faster access */
+ dino_dev->hba.base_addr = ioremap(hpa, 4096);
dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */
spin_lock_init(&dino_dev->dinosaur_pen);
dino_dev->hba.iommu = ccio_get_iommu(dev);
@@ -1027,9 +1039,9 @@ static struct parisc_device_id dino_tbl[] = {
};
static struct parisc_driver dino_driver = {
- .name = "Dino",
+ .name = "dino",
.id_table = dino_tbl,
- .probe = dino_driver_callback,
+ .probe = dino_probe,
};
/*
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 043d47aea75b..6362bf99eff6 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -315,7 +315,7 @@ static int __devinit eisa_probe(struct parisc_device *dev)
char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
- name, dev->hpa);
+ name, dev->hpa.start);
eisa_dev.hba.dev = dev;
eisa_dev.hba.iommu = ccio_get_iommu(dev);
@@ -397,7 +397,7 @@ static struct parisc_device_id eisa_tbl[] = {
MODULE_DEVICE_TABLE(parisc, eisa_tbl);
static struct parisc_driver eisa_driver = {
- .name = "EISA Bus Adapter",
+ .name = "eisa_ba",
.id_table = eisa_tbl,
.probe = eisa_probe,
};
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index af5e02526a18..16d40f95978d 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -183,12 +183,20 @@ void gsc_asic_assign_irq(struct gsc_asic *asic, int local_irq, int *irqp)
*irqp = irq;
}
+static struct device *next_device(struct klist_iter *i)
+{
+ struct klist_node * n = klist_next(i);
+ return n ? container_of(n, struct device, knode_parent) : NULL;
+}
+
void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
void (*choose_irq)(struct parisc_device *, void *))
{
struct device *dev;
+ struct klist_iter i;
- list_for_each_entry(dev, &parent->dev.children, node) {
+ klist_iter_init(&parent->dev.klist_children, &i);
+ while ((dev = next_device(&i))) {
struct parisc_device *padev = to_parisc_device(dev);
/* work-around for 715/64 and others which have parent
@@ -197,6 +205,7 @@ void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
return gsc_fixup_irqs(padev, ctrl, choose_irq);
choose_irq(padev, ctrl);
}
+ klist_iter_exit(&i);
}
int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic)
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index e869c6020370..5edf93f80757 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -68,14 +68,14 @@ static int hppb_probe(struct parisc_device *dev)
memset(card->next, '\0', sizeof(struct hppb_card));
card = card->next;
}
- printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa);
+ printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start);
- card->hpa = dev->hpa;
+ card->hpa = dev->hpa.start;
card->mmio_region.name = "HP-PB Bus";
card->mmio_region.flags = IORESOURCE_MEM;
- card->mmio_region.start = __raw_readl(dev->hpa + IO_IO_LOW);
- card->mmio_region.end = __raw_readl(dev->hpa + IO_IO_HIGH) - 1;
+ card->mmio_region.start = gsc_readl(dev->hpa.start + IO_IO_LOW);
+ card->mmio_region.end = gsc_readl(dev->hpa.start + IO_IO_HIGH) - 1;
status = ccio_request_resource(dev, &card->mmio_region);
if(status < 0) {
@@ -93,7 +93,7 @@ static struct parisc_device_id hppb_tbl[] = {
};
static struct parisc_driver hppb_driver = {
- .name = "Gecko Boa",
+ .name = "gecko_boa",
.id_table = hppb_tbl,
.probe = hppb_probe,
};
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 7a57c1b8373f..a39fbfef789a 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -244,7 +244,7 @@ static struct irt_entry *iosapic_alloc_irt(int num_entries)
* 4-byte alignment on 32-bit kernels
*/
a = (unsigned long)kmalloc(sizeof(struct irt_entry) * num_entries + 8, GFP_KERNEL);
- a = (a + 7) & ~7;
+ a = (a + 7UL) & ~7UL;
return (struct irt_entry *)a;
}
diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c
index cb84a4e84a2f..a8c20396ffbe 100644
--- a/drivers/parisc/lasi.c
+++ b/drivers/parisc/lasi.c
@@ -175,7 +175,7 @@ lasi_init_chip(struct parisc_device *dev)
return -ENOMEM;
lasi->name = "Lasi";
- lasi->hpa = dev->hpa;
+ lasi->hpa = dev->hpa.start;
/* Check the 4-bit (yes, only 4) version register */
lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf;
@@ -233,7 +233,7 @@ static struct parisc_device_id lasi_tbl[] = {
};
struct parisc_driver lasi_driver = {
- .name = "Lasi",
+ .name = "lasi",
.id_table = lasi_tbl,
.probe = lasi_init_chip,
};
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 7fdd80b7eb47..5e495dcbc58a 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1288,7 +1288,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
** Adjust "window" for this rope.
*/
rsize /= ROPES_PER_IOC;
- r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa);
+ r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start);
r->end = r->start + rsize;
} else {
r->end = r->start = 0; /* Not enabled. */
@@ -1458,7 +1458,7 @@ lba_driver_probe(struct parisc_device *dev)
u32 func_class;
void *tmp_obj;
char *version;
- void __iomem *addr = ioremap(dev->hpa, 4096);
+ void __iomem *addr = ioremap(dev->hpa.start, 4096);
/* Read HW Rev First */
func_class = READ_REG32(addr + LBA_FCLASS);
@@ -1476,7 +1476,7 @@ lba_driver_probe(struct parisc_device *dev)
}
printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
- MODULE_NAME, version, func_class & 0xf, dev->hpa);
+ MODULE_NAME, version, func_class & 0xf, dev->hpa.start);
if (func_class < 2) {
printk(KERN_WARNING "Can't support LBA older than "
@@ -1503,17 +1503,17 @@ lba_driver_probe(struct parisc_device *dev)
* but for the mask for func_class.
*/
printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
- MODULE_NAME, version, func_class & 0xff, dev->hpa);
+ MODULE_NAME, version, func_class & 0xff, dev->hpa.start);
cfg_ops = &mercury_cfg_ops;
} else {
- printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa);
+ printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa.start);
return -ENODEV;
}
/*
** Tell I/O SAPIC driver we have a IRQ handler/region.
*/
- tmp_obj = iosapic_register(dev->hpa + LBA_IOSAPIC_BASE);
+ tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE);
/* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't
** have an IRT entry will get NULL back from iosapic code.
@@ -1635,7 +1635,7 @@ void __init lba_init(void)
*/
void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
{
- void __iomem * base_addr = ioremap(lba->hpa, 4096);
+ void __iomem * base_addr = ioremap(lba->hpa.start, 4096);
imask <<= 2; /* adjust for hints - 2 more bits */
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 286902298e33..95bd07b8b61b 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -18,6 +18,9 @@
* Changes:
* - Audit copy_from_user in led_proc_write.
* Daniele Bellucci <bellucda@tiscali.it>
+ * - Switch from using a tasklet to a work queue, so the led_LCD_driver
+ * can sleep.
+ * David Pye <dmp@davidmpye.dyndns.org>
*/
#include <linux/config.h>
@@ -37,6 +40,7 @@
#include <linux/proc_fs.h>
#include <linux/ctype.h>
#include <linux/blkdev.h>
+#include <linux/workqueue.h>
#include <linux/rcupdate.h>
#include <asm/io.h>
#include <asm/processor.h>
@@ -47,25 +51,30 @@
#include <asm/uaccess.h>
/* The control of the LEDs and LCDs on PARISC-machines have to be done
- completely in software. The necessary calculations are done in a tasklet
- which is scheduled at every timer interrupt and since the calculations
- may consume relatively much CPU-time some of the calculations can be
+ completely in software. The necessary calculations are done in a work queue
+ task which is scheduled regularly, and since the calculations may consume a
+ relatively large amount of CPU time, some of the calculations can be
turned off with the following variables (controlled via procfs) */
static int led_type = -1;
-static int led_heartbeat = 1;
-static int led_diskio = 1;
-static int led_lanrxtx = 1;
+static unsigned char lastleds; /* LED state from most recent update */
+static unsigned int led_heartbeat = 1;
+static unsigned int led_diskio = 1;
+static unsigned int led_lanrxtx = 1;
static char lcd_text[32];
static char lcd_text_default[32];
+
+static struct workqueue_struct *led_wq;
+static void led_work_func(void *);
+static DECLARE_WORK(led_task, led_work_func, NULL);
+
#if 0
#define DPRINTK(x) printk x
#else
#define DPRINTK(x)
#endif
-
struct lcd_block {
unsigned char command; /* stores the command byte */
unsigned char on; /* value for turning LED on */
@@ -116,12 +125,27 @@ lcd_info __attribute__((aligned(8))) =
#define LCD_DATA_REG lcd_info.lcd_data_reg_addr
#define LED_DATA_REG lcd_info.lcd_cmd_reg_addr /* LASI & ASP only */
+#define LED_HASLCD 1
+#define LED_NOLCD 0
+
+/* The workqueue must be created at init-time */
+static int start_task(void)
+{
+ /* Display the default text now */
+ if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
+
+ /* Create the work queue and queue the LED task */
+ led_wq = create_singlethread_workqueue("led_wq");
+ queue_work(led_wq, &led_task);
+
+ return 0;
+}
+
+device_initcall(start_task);
/* ptr to LCD/LED-specific function */
static void (*led_func_ptr) (unsigned char);
-#define LED_HASLCD 1
-#define LED_NOLCD 0
#ifdef CONFIG_PROC_FS
static int led_proc_read(char *page, char **start, off_t off, int count,
int *eof, void *data)
@@ -286,52 +310,35 @@ static void led_LASI_driver(unsigned char leds)
/*
**
** led_LCD_driver()
- **
- ** The logic of the LCD driver is, that we write at every scheduled call
- ** only to one of LCD_CMD_REG _or_ LCD_DATA_REG - registers.
- ** That way we don't need to let this tasklet busywait for min_cmd_delay
- ** milliseconds.
- **
- ** TODO: check the value of "min_cmd_delay" against the value of HZ.
**
*/
static void led_LCD_driver(unsigned char leds)
{
- static int last_index; /* 0:heartbeat, 1:disk, 2:lan_in, 3:lan_out */
- static int last_was_cmd;/* 0: CMD was written last, 1: DATA was last */
- struct lcd_block *block_ptr;
- int value;
-
- switch (last_index) {
- case 0: block_ptr = &lcd_info.heartbeat;
- value = leds & LED_HEARTBEAT;
- break;
- case 1: block_ptr = &lcd_info.disk_io;
- value = leds & LED_DISK_IO;
- break;
- case 2: block_ptr = &lcd_info.lan_rcv;
- value = leds & LED_LAN_RCV;
- break;
- case 3: block_ptr = &lcd_info.lan_tx;
- value = leds & LED_LAN_TX;
- break;
- default: /* should never happen: */
- return;
- }
-
- if (last_was_cmd) {
- /* write the value to the LCD data port */
- gsc_writeb( value ? block_ptr->on : block_ptr->off, LCD_DATA_REG );
- } else {
- /* write the command-byte to the LCD command register */
- gsc_writeb( block_ptr->command, LCD_CMD_REG );
- }
+ static int i;
+ static unsigned char mask[4] = { LED_HEARTBEAT, LED_DISK_IO,
+ LED_LAN_RCV, LED_LAN_TX };
- /* now update the vars for the next interrupt iteration */
- if (++last_was_cmd == 2) { /* switch between cmd & data */
- last_was_cmd = 0;
- if (++last_index == 4)
- last_index = 0; /* switch back to heartbeat index */
+ static struct lcd_block * blockp[4] = {
+ &lcd_info.heartbeat,
+ &lcd_info.disk_io,
+ &lcd_info.lan_rcv,
+ &lcd_info.lan_tx
+ };
+
+ /* Convert min_cmd_delay to milliseconds */
+ unsigned int msec_cmd_delay = 1 + (lcd_info.min_cmd_delay / 1000);
+
+ for (i=0; i<4; ++i)
+ {
+ if ((leds & mask[i]) != (lastleds & mask[i]))
+ {
+ gsc_writeb( blockp[i]->command, LCD_CMD_REG );
+ msleep(msec_cmd_delay);
+
+ gsc_writeb( leds & mask[i] ? blockp[i]->on :
+ blockp[i]->off, LCD_DATA_REG );
+ msleep(msec_cmd_delay);
+ }
}
}
@@ -356,7 +363,7 @@ static __inline__ int led_get_net_activity(void)
rx_total = tx_total = 0;
- /* we are running as tasklet, so locking dev_base
+ /* we are running as a workqueue task, so locking dev_base
* for reading should be OK */
read_lock(&dev_base_lock);
rcu_read_lock();
@@ -405,7 +412,7 @@ static __inline__ int led_get_diskio_activity(void)
static unsigned long last_pgpgin, last_pgpgout;
struct page_state pgstat;
int changed;
-
+
get_full_page_state(&pgstat); /* get no of sectors in & out */
/* Just use a very simple calculation here. Do not care about overflow,
@@ -413,86 +420,70 @@ static __inline__ int led_get_diskio_activity(void)
changed = (pgstat.pgpgin != last_pgpgin) || (pgstat.pgpgout != last_pgpgout);
last_pgpgin = pgstat.pgpgin;
last_pgpgout = pgstat.pgpgout;
-
+
return (changed ? LED_DISK_IO : 0);
}
/*
- ** led_tasklet_func()
+ ** led_work_func()
**
- ** is scheduled at every timer interrupt from time.c and
- ** updates the chassis LCD/LED
+ ** manages when and which chassis LCD/LED gets updated
TODO:
- display load average (older machines like 715/64 have 4 "free" LED's for that)
- optimizations
*/
-#define HEARTBEAT_LEN (HZ*6/100)
-#define HEARTBEAT_2ND_RANGE_START (HZ*22/100)
+#define HEARTBEAT_LEN (HZ*10/100)
+#define HEARTBEAT_2ND_RANGE_START (HZ*28/100)
#define HEARTBEAT_2ND_RANGE_END (HEARTBEAT_2ND_RANGE_START + HEARTBEAT_LEN)
-#define NORMALIZED_COUNT(count) (count/(HZ/100))
+#define LED_UPDATE_INTERVAL (1 + (HZ*19/1000))
-static void led_tasklet_func(unsigned long unused)
+static void led_work_func (void *unused)
{
- static unsigned char lastleds;
- unsigned char currentleds; /* stores current value of the LEDs */
- static unsigned long count; /* static incremented value, not wrapped */
+ static unsigned long last_jiffies;
static unsigned long count_HZ; /* counter in range 0..HZ */
+ unsigned char currentleds = 0; /* stores current value of the LEDs */
/* exit if not initialized */
if (!led_func_ptr)
return;
- /* increment the local counters */
- ++count;
- if (++count_HZ == HZ)
+ /* increment the heartbeat timekeeper */
+ count_HZ += jiffies - last_jiffies;
+ last_jiffies = jiffies;
+ if (count_HZ >= HZ)
count_HZ = 0;
- currentleds = lastleds;
-
- if (led_heartbeat)
- {
- /* flash heartbeat-LED like a real heart (2 x short then a long delay) */
- if (count_HZ<HEARTBEAT_LEN ||
- (count_HZ>=HEARTBEAT_2ND_RANGE_START && count_HZ<HEARTBEAT_2ND_RANGE_END))
- currentleds |= LED_HEARTBEAT;
- else
- currentleds &= ~LED_HEARTBEAT;
- }
-
- /* look for network activity and flash LEDs respectively */
- if (led_lanrxtx && ((NORMALIZED_COUNT(count)+(8/2)) & 7) == 0)
+ if (likely(led_heartbeat))
{
- currentleds &= ~(LED_LAN_RCV | LED_LAN_TX);
- currentleds |= led_get_net_activity();
+ /* flash heartbeat-LED like a real heart
+ * (2 x short then a long delay)
+ */
+ if (count_HZ < HEARTBEAT_LEN ||
+ (count_HZ >= HEARTBEAT_2ND_RANGE_START &&
+ count_HZ < HEARTBEAT_2ND_RANGE_END))
+ currentleds |= LED_HEARTBEAT;
}
- /* avoid to calculate diskio-stats at same irq as netio-stats */
- if (led_diskio && (NORMALIZED_COUNT(count) & 7) == 0)
- {
- currentleds &= ~LED_DISK_IO;
- currentleds |= led_get_diskio_activity();
- }
+ if (likely(led_lanrxtx)) currentleds |= led_get_net_activity();
+ if (likely(led_diskio)) currentleds |= led_get_diskio_activity();
/* blink all LEDs twice a second if we got an Oops (HPMC) */
- if (oops_in_progress) {
+ if (unlikely(oops_in_progress))
currentleds = (count_HZ<=(HZ/2)) ? 0 : 0xff;
- }
-
- /* update the LCD/LEDs */
- if (currentleds != lastleds) {
- led_func_ptr(currentleds);
- lastleds = currentleds;
- }
-}
-/* main led tasklet struct (scheduled from time.c) */
-DECLARE_TASKLET_DISABLED(led_tasklet, led_tasklet_func, 0);
+ if (currentleds != lastleds)
+ {
+ led_func_ptr(currentleds); /* Update the LCD/LEDs */
+ lastleds = currentleds;
+ }
+ queue_delayed_work(led_wq, &led_task, LED_UPDATE_INTERVAL);
+}
/*
** led_halt()
@@ -522,9 +513,13 @@ static int led_halt(struct notifier_block *nb, unsigned long event, void *buf)
default: return NOTIFY_DONE;
}
- /* completely stop the LED/LCD tasklet */
- tasklet_disable(&led_tasklet);
-
+ /* Cancel the work item and delete the queue */
+ if (led_wq) {
+ cancel_rearming_delayed_workqueue(led_wq, &led_task);
+ destroy_workqueue(led_wq);
+ led_wq = NULL;
+ }
+
if (lcd_info.model == DISPLAY_MODEL_LCD)
lcd_print(txt);
else
@@ -559,7 +554,6 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d
printk(KERN_INFO "LCD display at %lx,%lx registered\n",
LCD_CMD_REG , LCD_DATA_REG);
led_func_ptr = led_LCD_driver;
- lcd_print( lcd_text_default );
led_type = LED_HASLCD;
break;
@@ -589,9 +583,11 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d
initialized++;
register_reboot_notifier(&led_notifier);
- /* start the led tasklet for the first time */
- tasklet_enable(&led_tasklet);
-
+ /* Ensure the work is queued */
+ if (led_wq) {
+ queue_work(led_wq, &led_task);
+ }
+
return 0;
}
@@ -626,8 +622,8 @@ void __init register_led_regions(void)
** lcd_print()
**
** Displays the given string on the LCD-Display of newer machines.
- ** lcd_print() disables the timer-based led tasklet during its
- ** execution and enables it afterwards again.
+ ** lcd_print() disables/enables the timer-based led work queue to
+ ** avoid a race condition while writing the CMD/DATA register pair.
**
*/
int lcd_print( char *str )
@@ -637,12 +633,13 @@ int lcd_print( char *str )
if (!led_func_ptr || lcd_info.model != DISPLAY_MODEL_LCD)
return 0;
- /* temporarily disable the led tasklet */
- tasklet_disable(&led_tasklet);
+ /* temporarily disable the led work task */
+ if (led_wq)
+ cancel_rearming_delayed_workqueue(led_wq, &led_task);
/* copy display string to buffer for procfs */
strlcpy(lcd_text, str, sizeof(lcd_text));
-
+
/* Set LCD Cursor to 1st character */
gsc_writeb(lcd_info.reset_cmd1, LCD_CMD_REG);
udelay(lcd_info.min_cmd_delay);
@@ -656,8 +653,10 @@ int lcd_print( char *str )
udelay(lcd_info.min_cmd_delay);
}
- /* re-enable the led tasklet */
- tasklet_enable(&led_tasklet);
+ /* re-queue the work */
+ if (led_wq) {
+ queue_work(led_wq, &led_task);
+ }
return lcd_info.lcd_width;
}
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 67c8f3b44848..273a74179720 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -536,7 +536,7 @@ pdcs_info_read(struct subsystem *entry, char *buf)
out += sprintf(out, "Memory tested: ");
if ((result & 0x0F) < 0x0E)
- out += sprintf(out, "%.3f MB", 0.256*(1<<(result & 0x0F)));
+ out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256);
else
out += sprintf(out, "All");
out += sprintf(out, "\n");
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index bd8b3e5a5cd7..c85653f315aa 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -91,8 +91,8 @@ extern struct proc_dir_entry * proc_mckinley_root;
#define DBG_RES(x...)
#endif
-#if defined(__LP64__) && !defined(CONFIG_PDC_NARROW)
-/* "low end" PA8800 machines use ZX1 chipset */
+#if defined(CONFIG_64BIT)
+/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
#define ZX1_SUPPORT
#endif
@@ -231,7 +231,7 @@ struct ioc {
spinlock_t res_lock;
unsigned int res_bitshift; /* from the LEFT! */
unsigned int res_size; /* size of resource map in bytes */
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
/* FIXME : DMA HINTs not used */
unsigned long hint_mask_pdir; /* bits used for DMA hints */
unsigned int hint_shift_pdir;
@@ -294,7 +294,7 @@ static unsigned long piranha_bad_128k = 0;
/* Looks nice and keeps the compiler happy */
#define SBA_DEV(d) ((struct sba_device *) (d))
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
static int reserve_sba_gart = 1;
#endif
@@ -314,7 +314,7 @@ static int reserve_sba_gart = 1;
#define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr)
#define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define READ_REG(addr) READ_REG64(addr)
#define WRITE_REG(value, addr) WRITE_REG64(value, addr)
#else
@@ -324,7 +324,7 @@ static int reserve_sba_gart = 1;
#ifdef DEBUG_SBA_INIT
-/* NOTE: When __LP64__ isn't defined, READ_REG64() is two 32-bit reads */
+/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */
/**
* sba_dump_ranges - debugging only - print ranges assigned to this IOA
@@ -364,7 +364,7 @@ static void sba_dump_tlb(void __iomem *hpa)
#else
#define sba_dump_ranges(x)
#define sba_dump_tlb(x)
-#endif
+#endif /* DEBUG_SBA_INIT */
#ifdef ASSERT_PDIR_SANITY
@@ -674,7 +674,7 @@ sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
*
***************************************************************/
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
#endif
@@ -743,9 +743,8 @@ sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
* (bit #61, big endian), we have to flush and sync every time
* IO-PDIR is changed in Ike/Astro.
*/
- if (ioc_needs_fdc) {
- asm volatile("fdc 0(%%sr1,%0)\n\tsync" : : "r" (pdir_ptr));
- }
+ if (ioc_needs_fdc)
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
}
@@ -769,42 +768,57 @@ static SBA_INLINE void
sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
{
u32 iovp = (u32) SBA_IOVP(ioc,iova);
-
- /* Even though this is a big-endian machine, the entries
- ** in the iopdir are little endian. That's why we clear the byte
- ** at +7 instead of at +0.
- */
- int off = PDIR_INDEX(iovp)*sizeof(u64)+7;
+ u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)];
#ifdef ASSERT_PDIR_SANITY
- /* Assert first pdir entry is set */
- if (0x80 != (((u8 *) ioc->pdir_base)[off])) {
+ /* Assert first pdir entry is set.
+ **
+ ** Even though this is a big-endian machine, the entries
+ ** in the iopdir are little endian. That's why we look at
+ ** the byte at +7 instead of at +0.
+ */
+ if (0x80 != (((u8 *) pdir_ptr)[7])) {
sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
}
#endif
- if (byte_cnt <= IOVP_SIZE)
+ if (byte_cnt > IOVP_SIZE)
{
- iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
+#if 0
+ unsigned long entries_per_cacheline = ioc_needs_fdc ?
+ L1_CACHE_ALIGN(((unsigned long) pdir_ptr))
+ - (unsigned long) pdir_ptr;
+ : 262144;
+#endif
- /*
- ** clear I/O PDIR entry "valid" bit
- ** Do NOT clear the rest - save it for debugging.
- ** We should only clear bits that have previously
- ** been enabled.
- */
- ((u8 *)(ioc->pdir_base))[off] = 0;
- } else {
- u32 t = get_order(byte_cnt) + PAGE_SHIFT;
+ /* set "size" field for PCOM */
+ iovp |= get_order(byte_cnt) + PAGE_SHIFT;
- iovp |= t;
do {
/* clear I/O Pdir entry "valid" bit first */
- ((u8 *)(ioc->pdir_base))[off] = 0;
- off += sizeof(u64);
+ ((u8 *) pdir_ptr)[7] = 0;
+ if (ioc_needs_fdc) {
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
+#if 0
+ entries_per_cacheline = L1_CACHE_SHIFT - 3;
+#endif
+ }
+ pdir_ptr++;
byte_cnt -= IOVP_SIZE;
- } while (byte_cnt > 0);
- }
+ } while (byte_cnt > IOVP_SIZE);
+ } else
+ iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
+
+ /*
+ ** clear I/O PDIR entry "valid" bit.
+ ** We have to R/M/W the cacheline regardless how much of the
+ ** pdir entry that we clobber.
+ ** The rest of the entry would be useful for debugging if we
+ ** could dump core on HPMC.
+ */
+ ((u8 *) pdir_ptr)[7] = 0;
+ if (ioc_needs_fdc)
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM);
}
@@ -819,18 +833,29 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
static int sba_dma_supported( struct device *dev, u64 mask)
{
struct ioc *ioc;
+
if (dev == NULL) {
printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
BUG();
return(0);
}
- ioc = GET_IOC(dev);
+ /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
+ * then fall back to 32-bit if that fails.
+ * We are just "encouraging" 32-bit DMA masks here since we can
+ * never allow IOMMU bypass unless we add special support for ZX1.
+ */
+ if (mask > ~0U)
+ return 0;
- /* check if mask is > than the largest IO Virt Address */
+ ioc = GET_IOC(dev);
- return((int) (mask >= (ioc->ibase +
- (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
+ /*
+ * check if mask is >= than the current max IO Virt Address
+ * The max IO Virt address will *always* < 30 bits.
+ */
+ return((int)(mask >= (ioc->ibase - 1 +
+ (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
}
@@ -898,11 +923,17 @@ sba_map_single(struct device *dev, void *addr, size_t size,
size -= IOVP_SIZE;
pdir_start++;
}
- /* form complete address */
+
+ /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
#ifdef ASSERT_PDIR_SANITY
sba_check_pdir(ioc,"Check after sba_map_single()");
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
+
+ /* form complete address */
return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
}
@@ -958,12 +989,19 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
d--;
}
ioc->saved_cnt = 0;
+
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
}
#else /* DELAYED_RESOURCE_CNT == 0 */
sba_free_range(ioc, iova, size);
+
+ /* If fdc's were issued, force fdc's to be visible now */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
#endif /* DELAYED_RESOURCE_CNT == 0 */
+
spin_unlock_irqrestore(&ioc->res_lock, flags);
/* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
@@ -1106,6 +1144,10 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
*/
filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);
+ /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
{
@@ -1234,8 +1276,10 @@ sba_alloc_pdir(unsigned int pdir_size)
unsigned long pdir_order = get_order(pdir_size);
pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
- if (NULL == (void *) pdir_base)
- panic("sba_ioc_init() could not allocate I/O Page Table\n");
+ if (NULL == (void *) pdir_base) {
+ panic("%s() could not allocate I/O Page Table\n",
+ __FUNCTION__);
+ }
/* If this is not PA8700 (PCX-W2)
** OR newer than ver 2.2
@@ -1322,19 +1366,29 @@ sba_alloc_pdir(unsigned int pdir_size)
return (void *) pdir_base;
}
+static struct device *next_device(struct klist_iter *i)
+{
+ struct klist_node * n = klist_next(i);
+ return n ? container_of(n, struct device, knode_parent) : NULL;
+}
+
/* setup Mercury or Elroy IBASE/IMASK registers. */
-static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+static void
+setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
- /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+ /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
extern void lba_set_iregs(struct parisc_device *, u32, u32);
struct device *dev;
+ struct klist_iter i;
- list_for_each_entry(dev, &sba->dev.children, node) {
+ klist_iter_init(&sba->dev.klist_children, &i);
+ while ((dev = next_device(&i))) {
struct parisc_device *lba = to_parisc_device(dev);
- int rope_num = (lba->hpa >> 13) & 0xf;
+ int rope_num = (lba->hpa.start >> 13) & 0xf;
if (rope_num >> 3 == ioc_num)
lba_set_iregs(lba, ioc->ibase, ioc->imask);
}
+ klist_iter_exit(&i);
}
static void
@@ -1343,7 +1397,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
u32 iova_space_mask;
u32 iova_space_size;
int iov_order, tcnfg;
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
int agp_found = 0;
#endif
/*
@@ -1380,7 +1434,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
DBG_INIT("%s() pdir %p size %x\n",
__FUNCTION__, ioc->pdir_base, ioc->pdir_size);
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
@@ -1404,7 +1458,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK);
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/*
** Setting the upper bits makes checking for bypass addresses
** a little faster later on.
@@ -1437,7 +1491,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
*/
WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
/*
** If an AGP device is present, only use half of the IOV space
** for PCI DMA. Unfortunately we can't know ahead of time
@@ -1489,11 +1543,9 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
iova_space_size = 1 << (20 - PAGE_SHIFT);
}
-#ifdef __LP64__
else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
iova_space_size = 1 << (30 - PAGE_SHIFT);
}
-#endif
/*
** iova space must be log2() in size.
@@ -1519,7 +1571,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
DBG_INIT("%s() pdir %p size %x\n",
__FUNCTION__, ioc->pdir_base, pdir_size);
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
/* FIXME : DMA HINTs not used */
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
@@ -1590,7 +1642,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset)
{
- return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE);
+ return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
}
static void sba_hw_init(struct sba_device *sba_dev)
@@ -1968,7 +2020,7 @@ sba_driver_callback(struct parisc_device *dev)
u32 func_class;
int i;
char *version;
- void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE);
+ void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
sba_dump_ranges(sba_addr);
@@ -2010,7 +2062,7 @@ sba_driver_callback(struct parisc_device *dev)
}
printk(KERN_INFO "%s found %s at 0x%lx\n",
- MODULE_NAME, version, dev->hpa);
+ MODULE_NAME, version, dev->hpa.start);
sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
if (!sba_dev) {
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index e0efed796b92..bab3bcabcb6e 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -11,6 +11,7 @@
* (C) Copyright 2000 Alex deVries <alex@onefishtwo.ca>
* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
+ * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -405,6 +406,7 @@ static void __devinit superio_serial_init(void)
serial[0].iobase = sio_dev.sp1_base;
serial[0].irq = SP1_IRQ;
+ spin_lock_init(&serial[0].lock);
retval = early_serial_setup(&serial[0]);
if (retval < 0) {
@@ -414,6 +416,7 @@ static void __devinit superio_serial_init(void)
serial[1].iobase = sio_dev.sp2_base;
serial[1].irq = SP2_IRQ;
+ spin_lock_init(&serial[1].lock);
retval = early_serial_setup(&serial[1]);
if (retval < 0)
diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c
index e547d7d024d8..17dce2adf7fe 100644
--- a/drivers/parisc/wax.c
+++ b/drivers/parisc/wax.c
@@ -81,7 +81,7 @@ wax_init_chip(struct parisc_device *dev)
return -ENOMEM;
wax->name = "wax";
- wax->hpa = dev->hpa;
+ wax->hpa = dev->hpa.start;
wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */
printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 17:39:02 +0000