diff options
Diffstat (limited to 'drivers/opp/core.c')
| -rw-r--r-- | drivers/opp/core.c | 1880 |
1 files changed, 1880 insertions, 0 deletions
diff --git a/drivers/opp/core.c b/drivers/opp/core.c new file mode 100644 index 000000000000..92fa94a6dcc1 --- /dev/null +++ b/drivers/opp/core.c @@ -0,0 +1,1880 @@ +/* + * Generic OPP Interface + * + * Copyright (C) 2009-2010 Texas Instruments Incorporated. + * Nishanth Menon + * Romit Dasgupta + * Kevin Hilman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/export.h> +#include <linux/pm_domain.h> +#include <linux/regulator/consumer.h> + +#include "opp.h" + +/* + * The root of the list of all opp-tables. All opp_table structures branch off + * from here, with each opp_table containing the list of opps it supports in + * various states of availability. + */ +LIST_HEAD(opp_tables); +/* Lock to allow exclusive modification to the device and opp lists */ +DEFINE_MUTEX(opp_table_lock); + +static void dev_pm_opp_get(struct dev_pm_opp *opp); + +static struct opp_device *_find_opp_dev(const struct device *dev, + struct opp_table *opp_table) +{ + struct opp_device *opp_dev; + + list_for_each_entry(opp_dev, &opp_table->dev_list, node) + if (opp_dev->dev == dev) + return opp_dev; + + return NULL; +} + +static struct opp_table *_find_opp_table_unlocked(struct device *dev) +{ + struct opp_table *opp_table; + + list_for_each_entry(opp_table, &opp_tables, node) { + if (_find_opp_dev(dev, opp_table)) { + _get_opp_table_kref(opp_table); + + return opp_table; + } + } + + return ERR_PTR(-ENODEV); +} + +/** + * _find_opp_table() - find opp_table struct using device pointer + * @dev: device pointer used to lookup OPP table + * + * Search OPP table for one containing matching device. + * + * Return: pointer to 'struct opp_table' if found, otherwise -ENODEV or + * -EINVAL based on type of error. + * + * The callers must call dev_pm_opp_put_opp_table() after the table is used. + */ +struct opp_table *_find_opp_table(struct device *dev) +{ + struct opp_table *opp_table; + + if (IS_ERR_OR_NULL(dev)) { + pr_err("%s: Invalid parameters\n", __func__); + return ERR_PTR(-EINVAL); + } + + mutex_lock(&opp_table_lock); + opp_table = _find_opp_table_unlocked(dev); + mutex_unlock(&opp_table_lock); + + return opp_table; +} + +/** + * dev_pm_opp_get_voltage() - Gets the voltage corresponding to an opp + * @opp: opp for which voltage has to be returned for + * + * Return: voltage in micro volt corresponding to the opp, else + * return 0 + * + * This is useful only for devices with single power supply. + */ +unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) +{ + if (IS_ERR_OR_NULL(opp)) { + pr_err("%s: Invalid parameters\n", __func__); + return 0; + } + + return opp->supplies[0].u_volt; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage); + +/** + * dev_pm_opp_get_freq() - Gets the frequency corresponding to an available opp + * @opp: opp for which frequency has to be returned for + * + * Return: frequency in hertz corresponding to the opp, else + * return 0 + */ +unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) +{ + if (IS_ERR_OR_NULL(opp) || !opp->available) { + pr_err("%s: Invalid parameters\n", __func__); + return 0; + } + + return opp->rate; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); + +/** + * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not + * @opp: opp for which turbo mode is being verified + * + * Turbo OPPs are not for normal use, and can be enabled (under certain + * conditions) for short duration of times to finish high throughput work + * quickly. Running on them for longer times may overheat the chip. + * + * Return: true if opp is turbo opp, else false. + */ +bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp) +{ + if (IS_ERR_OR_NULL(opp) || !opp->available) { + pr_err("%s: Invalid parameters\n", __func__); + return false; + } + + return opp->turbo; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_is_turbo); + +/** + * dev_pm_opp_get_max_clock_latency() - Get max clock latency in nanoseconds + * @dev: device for which we do this operation + * + * Return: This function returns the max clock latency in nanoseconds. + */ +unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev) +{ + struct opp_table *opp_table; + unsigned long clock_latency_ns; + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return 0; + + clock_latency_ns = opp_table->clock_latency_ns_max; + + dev_pm_opp_put_opp_table(opp_table); + + return clock_latency_ns; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency); + +/** + * dev_pm_opp_get_max_volt_latency() - Get max voltage latency in nanoseconds + * @dev: device for which we do this operation + * + * Return: This function returns the max voltage latency in nanoseconds. + */ +unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) +{ + struct opp_table *opp_table; + struct dev_pm_opp *opp; + struct regulator *reg; + unsigned long latency_ns = 0; + int ret, i, count; + struct { + unsigned long min; + unsigned long max; + } *uV; + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return 0; + + count = opp_table->regulator_count; + + /* Regulator may not be required for the device */ + if (!count) + goto put_opp_table; + + uV = kmalloc_array(count, sizeof(*uV), GFP_KERNEL); + if (!uV) + goto put_opp_table; + + mutex_lock(&opp_table->lock); + + for (i = 0; i < count; i++) { + uV[i].min = ~0; + uV[i].max = 0; + + list_for_each_entry(opp, &opp_table->opp_list, node) { + if (!opp->available) + continue; + + if (opp->supplies[i].u_volt_min < uV[i].min) + uV[i].min = opp->supplies[i].u_volt_min; + if (opp->supplies[i].u_volt_max > uV[i].max) + uV[i].max = opp->supplies[i].u_volt_max; + } + } + + mutex_unlock(&opp_table->lock); + + /* + * The caller needs to ensure that opp_table (and hence the regulator) + * isn't freed, while we are executing this routine. + */ + for (i = 0; i < count; i++) { + reg = opp_table->regulators[i]; + ret = regulator_set_voltage_time(reg, uV[i].min, uV[i].max); + if (ret > 0) + latency_ns += ret * 1000; + } + + kfree(uV); +put_opp_table: + dev_pm_opp_put_opp_table(opp_table); + + return latency_ns; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_volt_latency); + +/** + * dev_pm_opp_get_max_transition_latency() - Get max transition latency in + * nanoseconds + * @dev: device for which we do this operation + * + * Return: This function returns the max transition latency, in nanoseconds, to + * switch from one OPP to other. + */ +unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev) +{ + return dev_pm_opp_get_max_volt_latency(dev) + + dev_pm_opp_get_max_clock_latency(dev); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_transition_latency); + +/** + * dev_pm_opp_get_suspend_opp_freq() - Get frequency of suspend opp in Hz + * @dev: device for which we do this operation + * + * Return: This function returns the frequency of the OPP marked as suspend_opp + * if one is available, else returns 0; + */ +unsigned long dev_pm_opp_get_suspend_opp_freq(struct device *dev) +{ + struct opp_table *opp_table; + unsigned long freq = 0; + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return 0; + + if (opp_table->suspend_opp && opp_table->suspend_opp->available) + freq = dev_pm_opp_get_freq(opp_table->suspend_opp); + + dev_pm_opp_put_opp_table(opp_table); + + return freq; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_suspend_opp_freq); + +/** + * dev_pm_opp_get_opp_count() - Get number of opps available in the opp table + * @dev: device for which we do this operation + * + * Return: This function returns the number of available opps if there are any, + * else returns 0 if none or the corresponding error value. + */ +int dev_pm_opp_get_opp_count(struct device *dev) +{ + struct opp_table *opp_table; + struct dev_pm_opp *temp_opp; + int count = 0; + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + count = PTR_ERR(opp_table); + dev_dbg(dev, "%s: OPP table not found (%d)\n", + __func__, count); + return count; + } + + mutex_lock(&opp_table->lock); + + list_for_each_entry(temp_opp, &opp_table->opp_list, node) { + if (temp_opp->available) + count++; + } + + mutex_unlock(&opp_table->lock); + dev_pm_opp_put_opp_table(opp_table); + + return count; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count); + +/** + * dev_pm_opp_find_freq_exact() - search for an exact frequency + * @dev: device for which we do this operation + * @freq: frequency to search for + * @available: true/false - match for available opp + * + * Return: Searches for exact match in the opp table and returns pointer to the + * matching opp if found, else returns ERR_PTR in case of error and should + * be handled using IS_ERR. Error return values can be: + * EINVAL: for bad pointer + * ERANGE: no match found for search + * ENODEV: if device not found in list of registered devices + * + * Note: available is a modifier for the search. if available=true, then the + * match is for exact matching frequency and is available in the stored OPP + * table. if false, the match is for exact frequency which is not available. + * + * This provides a mechanism to enable an opp which is not available currently + * or the opposite as well. + * + * The callers are required to call dev_pm_opp_put() for the returned OPP after + * use. + */ +struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, + unsigned long freq, + bool available) +{ + struct opp_table *opp_table; + struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + int r = PTR_ERR(opp_table); + + dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r); + return ERR_PTR(r); + } + + mutex_lock(&opp_table->lock); + + list_for_each_entry(temp_opp, &opp_table->opp_list, node) { + if (temp_opp->available == available && + temp_opp->rate == freq) { + opp = temp_opp; + + /* Increment the reference count of OPP */ + dev_pm_opp_get(opp); + break; + } + } + + mutex_unlock(&opp_table->lock); + dev_pm_opp_put_opp_table(opp_table); + + return opp; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact); + +static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table, + unsigned long *freq) +{ + struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); + + mutex_lock(&opp_table->lock); + + list_for_each_entry(temp_opp, &opp_table->opp_list, node) { + if (temp_opp->available && temp_opp->rate >= *freq) { + opp = temp_opp; + *freq = opp->rate; + + /* Increment the reference count of OPP */ + dev_pm_opp_get(opp); + break; + } + } + + mutex_unlock(&opp_table->lock); + + return opp; +} + +/** + * dev_pm_opp_find_freq_ceil() - Search for an rounded ceil freq + * @dev: device for which we do this operation + * @freq: Start frequency + * + * Search for the matching ceil *available* OPP from a starting freq + * for a device. + * + * Return: matching *opp and refreshes *freq accordingly, else returns + * ERR_PTR in case of error and should be handled using IS_ERR. Error return + * values can be: + * EINVAL: for bad pointer + * ERANGE: no match found for search + * ENODEV: if device not found in list of registered devices + * + * The callers are required to call dev_pm_opp_put() for the returned OPP after + * use. + */ +struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, + unsigned long *freq) +{ + struct opp_table *opp_table; + struct dev_pm_opp *opp; + + if (!dev || !freq) { + dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); + return ERR_PTR(-EINVAL); + } + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return ERR_CAST(opp_table); + + opp = _find_freq_ceil(opp_table, freq); + + dev_pm_opp_put_opp_table(opp_table); + + return opp; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil); + +/** + * dev_pm_opp_find_freq_floor() - Search for a rounded floor freq + * @dev: device for which we do this operation + * @freq: Start frequency + * + * Search for the matching floor *available* OPP from a starting freq + * for a device. + * + * Return: matching *opp and refreshes *freq accordingly, else returns + * ERR_PTR in case of error and should be handled using IS_ERR. Error return + * values can be: + * EINVAL: for bad pointer + * ERANGE: no match found for search + * ENODEV: if device not found in list of registered devices + * + * The callers are required to call dev_pm_opp_put() for the returned OPP after + * use. + */ +struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, + unsigned long *freq) +{ + struct opp_table *opp_table; + struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); + + if (!dev || !freq) { + dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); + return ERR_PTR(-EINVAL); + } + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return ERR_CAST(opp_table); + + mutex_lock(&opp_table->lock); + + list_for_each_entry(temp_opp, &opp_table->opp_list, node) { + if (temp_opp->available) { + /* go to the next node, before choosing prev */ + if (temp_opp->rate > *freq) + break; + else + opp = temp_opp; + } + } + + /* Increment the reference count of OPP */ + if (!IS_ERR(opp)) + dev_pm_opp_get(opp); + mutex_unlock(&opp_table->lock); + dev_pm_opp_put_opp_table(opp_table); + + if (!IS_ERR(opp)) + *freq = opp->rate; + + return opp; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); + +static int _set_opp_voltage(struct device *dev, struct regulator *reg, + struct dev_pm_opp_supply *supply) +{ + int ret; + + /* Regulator not available for device */ + if (IS_ERR(reg)) { + dev_dbg(dev, "%s: regulator not available: %ld\n", __func__, + PTR_ERR(reg)); + return 0; + } + + dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, + supply->u_volt_min, supply->u_volt, supply->u_volt_max); + + ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, + supply->u_volt, supply->u_volt_max); + if (ret) + dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n", + __func__, supply->u_volt_min, supply->u_volt, + supply->u_volt_max, ret); + + return ret; +} + +static inline int +_generic_set_opp_clk_only(struct device *dev, struct clk *clk, + unsigned long old_freq, unsigned long freq) +{ + int ret; + + ret = clk_set_rate(clk, freq); + if (ret) { + dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, + ret); + } + + return ret; +} + +static inline int +_generic_set_opp_domain(struct device *dev, struct clk *clk, + unsigned long old_freq, unsigned long freq, + unsigned int old_pstate, unsigned int new_pstate) +{ + int ret; + + /* Scaling up? Scale domain performance state before frequency */ + if (freq > old_freq) { + ret = dev_pm_genpd_set_performance_state(dev, new_pstate); + if (ret) + return ret; + } + + ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq); + if (ret) + goto restore_domain_state; + + /* Scaling down? Scale domain performance state after frequency */ + if (freq < old_freq) { + ret = dev_pm_genpd_set_performance_state(dev, new_pstate); + if (ret) + goto restore_freq; + } + + return 0; + +restore_freq: + if (_generic_set_opp_clk_only(dev, clk, freq, old_freq)) + dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", + __func__, old_freq); +restore_domain_state: + if (freq > old_freq) + dev_pm_genpd_set_performance_state(dev, old_pstate); + + return ret; +} + +static int _generic_set_opp_regulator(const struct opp_table *opp_table, + struct device *dev, + unsigned long old_freq, + unsigned long freq, + struct dev_pm_opp_supply *old_supply, + struct dev_pm_opp_supply *new_supply) +{ + struct regulator *reg = opp_table->regulators[0]; + int ret; + + /* This function only supports single regulator per device */ + if (WARN_ON(opp_table->regulator_count > 1)) { + dev_err(dev, "multiple regulators are not supported\n"); + return -EINVAL; + } + + /* Scaling up? Scale voltage before frequency */ + if (freq > old_freq) { + ret = _set_opp_voltage(dev, reg, new_supply); + if (ret) + goto restore_voltage; + } + + /* Change frequency */ + ret = _generic_set_opp_clk_only(dev, opp_table->clk, old_freq, freq); + if (ret) + goto restore_voltage; + + /* Scaling down? Scale voltage after frequency */ + if (freq < old_freq) { + ret = _set_opp_voltage(dev, reg, new_supply); + if (ret) + goto restore_freq; + } + + return 0; + +restore_freq: + if (_generic_set_opp_clk_only(dev, opp_table->clk, freq, old_freq)) + dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", + __func__, old_freq); +restore_voltage: + /* This shouldn't harm even if the voltages weren't updated earlier */ + if (old_supply) + _set_opp_voltage(dev, reg, old_supply); + + return ret; +} + +/** + * dev_pm_opp_set_rate() - Configure new OPP based on frequency + * @dev: device for which we do this operation + * @target_freq: frequency to achieve + * + * This configures the power-supplies and clock source to the levels specified + * by the OPP corresponding to the target_freq. + */ +int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) +{ + struct opp_table *opp_table; + unsigned long freq, old_freq; + struct dev_pm_opp *old_opp, *opp; + struct clk *clk; + int ret, size; + + if (unlikely(!target_freq)) { + dev_err(dev, "%s: Invalid target frequency %lu\n", __func__, + target_freq); + return -EINVAL; + } + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + dev_err(dev, "%s: device opp doesn't exist\n", __func__); + return PTR_ERR(opp_table); + } + + clk = opp_table->clk; + if (IS_ERR(clk)) { + dev_err(dev, "%s: No clock available for the device\n", + __func__); + ret = PTR_ERR(clk); + goto put_opp_table; + } + + freq = clk_round_rate(clk, target_freq); + if ((long)freq <= 0) + freq = target_freq; + + old_freq = clk_get_rate(clk); + + /* Return early if nothing to do */ + if (old_freq == freq) { + dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n", + __func__, freq); + ret = 0; + goto put_opp_table; + } + + old_opp = _find_freq_ceil(opp_table, &old_freq); + if (IS_ERR(old_opp)) { + dev_err(dev, "%s: failed to find current OPP for freq %lu (%ld)\n", + __func__, old_freq, PTR_ERR(old_opp)); + } + + opp = _find_freq_ceil(opp_table, &freq); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n", + __func__, freq, ret); + goto put_old_opp; + } + + dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__, + old_freq, freq); + + /* Only frequency scaling */ + if (!opp_table->regulators) { + /* + * We don't support devices with both regulator and + * domain performance-state for now. + */ + if (opp_table->genpd_performance_state) + ret = _generic_set_opp_domain(dev, clk, old_freq, freq, + IS_ERR(old_opp) ? 0 : old_opp->pstate, + opp->pstate); + else + ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq); + } else if (!opp_table->set_opp) { + ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq, + IS_ERR(old_opp) ? NULL : old_opp->supplies, + opp->supplies); + } else { + struct dev_pm_set_opp_data *data; + + data = opp_table->set_opp_data; + data->regulators = opp_table->regulators; + data->regulator_count = opp_table->regulator_count; + data->clk = clk; + data->dev = dev; + + data->old_opp.rate = old_freq; + size = sizeof(*opp->supplies) * opp_table->regulator_count; + if (IS_ERR(old_opp)) + memset(data->old_opp.supplies, 0, size); + else + memcpy(data->old_opp.supplies, old_opp->supplies, size); + + data->new_opp.rate = freq; + memcpy(data->new_opp.supplies, opp->supplies, size); + + ret = opp_table->set_opp(data); + } + + dev_pm_opp_put(opp); +put_old_opp: + if (!IS_ERR(old_opp)) + dev_pm_opp_put(old_opp); +put_opp_table: + dev_pm_opp_put_opp_table(opp_table); + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate); + +/* OPP-dev Helpers */ +static void _remove_opp_dev(struct opp_device *opp_dev, + struct opp_table *opp_table) +{ + opp_debug_unregister(opp_dev, opp_table); + list_del(&opp_dev->node); + kfree(opp_dev); +} + +struct opp_device *_add_opp_dev(const struct device *dev, + struct opp_table *opp_table) +{ + struct opp_device *opp_dev; + int ret; + + opp_dev = kzalloc(sizeof(*opp_dev), GFP_KERNEL); + if (!opp_dev) + return NULL; + + /* Initialize opp-dev */ + opp_dev->dev = dev; + list_add(&opp_dev->node, &opp_table->dev_list); + + /* Create debugfs entries for the opp_table */ + ret = opp_debug_register(opp_dev, opp_table); + if (ret) + dev_err(dev, "%s: Failed to register opp debugfs (%d)\n", + __func__, ret); + + return opp_dev; +} + +static struct opp_table *_allocate_opp_table(struct device *dev) +{ + struct opp_table *opp_table; + struct opp_device *opp_dev; + int ret; + + /* + * Allocate a new OPP table. In the infrequent case where a new + * device is needed to be added, we pay this penalty. + */ + opp_table = kzalloc(sizeof(*opp_table), GFP_KERNEL); + if (!opp_table) + return NULL; + + INIT_LIST_HEAD(&opp_table->dev_list); + + opp_dev = _add_opp_dev(dev, opp_table); + if (!opp_dev) { + kfree(opp_table); + return NULL; + } + + _of_init_opp_table(opp_table, dev); + + /* Find clk for the device */ + opp_table->clk = clk_get(dev, NULL); + if (IS_ERR(opp_table->clk)) { + ret = PTR_ERR(opp_table->clk); + if (ret != -EPROBE_DEFER) + dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, + ret); + } + + BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head); + INIT_LIST_HEAD(&opp_table->opp_list); + mutex_init(&opp_table->lock); + kref_init(&opp_table->kref); + + /* Secure the device table modification */ + list_add(&opp_table->node, &opp_tables); + return opp_table; +} + +void _get_opp_table_kref(struct opp_table *opp_table) +{ + kref_get(&opp_table->kref); +} + +struct opp_table *dev_pm_opp_get_opp_table(struct device *dev) +{ + struct opp_table *opp_table; + + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock); + + opp_table = _find_opp_table_unlocked(dev); + if (!IS_ERR(opp_table)) + goto unlock; + + opp_table = _allocate_opp_table(dev); + +unlock: + mutex_unlock(&opp_table_lock); + + return opp_table; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_table); + +static void _opp_table_kref_release(struct kref *kref) +{ + struct opp_table *opp_table = container_of(kref, struct opp_table, kref); + struct opp_device *opp_dev; + + /* Release clk */ + if (!IS_ERR(opp_table->clk)) + clk_put(opp_table->clk); + + opp_dev = list_first_entry(&opp_table->dev_list, struct opp_device, + node); + + _remove_opp_dev(opp_dev, opp_table); + + /* dev_list must be empty now */ + WARN_ON(!list_empty(&opp_table->dev_list)); + + mutex_destroy(&opp_table->lock); + list_del(&opp_table->node); + kfree(opp_table); + + mutex_unlock(&opp_table_lock); +} + +void dev_pm_opp_put_opp_table(struct opp_table *opp_table) +{ + kref_put_mutex(&opp_table->kref, _opp_table_kref_release, + &opp_table_lock); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_put_opp_table); + +void _opp_free(struct dev_pm_opp *opp) +{ + kfree(opp); +} + +static void _opp_kref_release(struct kref *kref) +{ + struct dev_pm_opp *opp = container_of(kref, struct dev_pm_opp, kref); + struct opp_table *opp_table = opp->opp_table; + + /* + * Notify the changes in the availability of the operable + * frequency/voltage list. + */ + blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_REMOVE, opp); + opp_debug_remove_one(opp); + list_del(&opp->node); + kfree(opp); + + mutex_unlock(&opp_table->lock); + dev_pm_opp_put_opp_table(opp_table); +} + +static void dev_pm_opp_get(struct dev_pm_opp *opp) +{ + kref_get(&opp->kref); +} + +void dev_pm_opp_put(struct dev_pm_opp *opp) +{ + kref_put_mutex(&opp->kref, _opp_kref_release, &opp->opp_table->lock); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_put); + +/** + * dev_pm_opp_remove() - Remove an OPP from OPP table + * @dev: device for which we do this operation + * @freq: OPP to remove with matching 'freq' + * + * This function removes an opp from the opp table. + */ +void dev_pm_opp_remove(struct device *dev, unsigned long freq) +{ + struct dev_pm_opp *opp; + struct opp_table *opp_table; + bool found = false; + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return; + + mutex_lock(&opp_table->lock); + + list_for_each_entry(opp, &opp_table->opp_list, node) { + if (opp->rate == freq) { + found = true; + break; + } + } + + mutex_unlock(&opp_table->lock); + + if (found) { + dev_pm_opp_put(opp); + } else { + dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n", + __func__, freq); + } + + dev_pm_opp_put_opp_table(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_remove); + +struct dev_pm_opp *_opp_allocate(struct opp_table *table) +{ + struct dev_pm_opp *opp; + int count, supply_size; + + /* Allocate space for at least one supply */ + count = table->regulator_count ? table->regulator_count : 1; + supply_size = sizeof(*opp->supplies) * count; + + /* allocate new OPP node and supplies structures */ + opp = kzalloc(sizeof(*opp) + supply_size, GFP_KERNEL); + if (!opp) + return NULL; + + /* Put the supplies at the end of the OPP structure as an empty array */ + opp->supplies = (struct dev_pm_opp_supply *)(opp + 1); + INIT_LIST_HEAD(&opp->node); + + return opp; +} + +static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, + struct opp_table *opp_table) +{ + struct regulator *reg; + int i; + + for (i = 0; i < opp_table->regulator_count; i++) { + reg = opp_table->regulators[i]; + + if (!regulator_is_supported_voltage(reg, + opp->supplies[i].u_volt_min, + opp->supplies[i].u_volt_max)) { + pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n", + __func__, opp->supplies[i].u_volt_min, + opp->supplies[i].u_volt_max); + return false; + } + } + + return true; +} + +/* + * Returns: + * 0: On success. And appropriate error message for duplicate OPPs. + * -EBUSY: For OPP with same freq/volt and is available. The callers of + * _opp_add() must return 0 if they receive -EBUSY from it. This is to make + * sure we don't print error messages unnecessarily if different parts of + * kernel try to initialize the OPP table. + * -EEXIST: For OPP with same freq but different volt or is unavailable. This + * should be considered an error by the callers of _opp_add(). + */ +int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, + struct opp_table *opp_table) +{ + struct dev_pm_opp *opp; + struct list_head *head; + int ret; + + /* + * Insert new OPP in order of increasing frequency and discard if + * already present. + * + * Need to use &opp_table->opp_list in the condition part of the 'for' + * loop, don't replace it with head otherwise it will become an infinite + * loop. + */ + mutex_lock(&opp_table->lock); + head = &opp_table->opp_list; + + list_for_each_entry(opp, &opp_table->opp_list, node) { + if (new_opp->rate > opp->rate) { + head = &opp->node; + continue; + } + + if (new_opp->rate < opp->rate) + break; + + /* Duplicate OPPs */ + dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", + __func__, opp->rate, opp->supplies[0].u_volt, + opp->available, new_opp->rate, + new_opp->supplies[0].u_volt, new_opp->available); + + /* Should we compare voltages for all regulators here ? */ + ret = opp->available && + new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? -EBUSY : -EEXIST; + + mutex_unlock(&opp_table->lock); + return ret; + } + + if (opp_table->get_pstate) + new_opp->pstate = opp_table->get_pstate(dev, new_opp->rate); + + list_add(&new_opp->node, head); + mutex_unlock(&opp_table->lock); + + new_opp->opp_table = opp_table; + kref_init(&new_opp->kref); + + /* Get a reference to the OPP table */ + _get_opp_table_kref(opp_table); + + ret = opp_debug_create_one(new_opp, opp_table); + if (ret) + dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n", + __func__, ret); + + if (!_opp_supported_by_regulators(new_opp, opp_table)) { + new_opp->available = false; + dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n", + __func__, new_opp->rate); + } + + return 0; +} + +/** + * _opp_add_v1() - Allocate a OPP based on v1 bindings. + * @opp_table: OPP table + * @dev: device for which we do this operation + * @freq: Frequency in Hz for this OPP + * @u_volt: Voltage in uVolts for this OPP + * @dynamic: Dynamically added OPPs. + * + * This function adds an opp definition to the opp table and returns status. + * The opp is made available by default and it can be controlled using + * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove. + * + * NOTE: "dynamic" parameter impacts OPPs added by the dev_pm_opp_of_add_table + * and freed by dev_pm_opp_of_remove_table. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + */ +int _opp_add_v1(struct opp_table *opp_table, struct device *dev, + unsigned long freq, long u_volt, bool dynamic) +{ + struct dev_pm_opp *new_opp; + unsigned long tol; + int ret; + + new_opp = _opp_allocate(opp_table); + if (!new_opp) + return -ENOMEM; + + /* populate the opp table */ + new_opp->rate = freq; + tol = u_volt * opp_table->voltage_tolerance_v1 / 100; + new_opp->supplies[0].u_volt = u_volt; + new_opp->supplies[0].u_volt_min = u_volt - tol; + new_opp->supplies[0].u_volt_max = u_volt + tol; + new_opp->available = true; + new_opp->dynamic = dynamic; + + ret = _opp_add(dev, new_opp, opp_table); + if (ret) { + /* Don't return error for duplicate OPPs */ + if (ret == -EBUSY) + ret = 0; + goto free_opp; + } + + /* + * Notify the changes in the availability of the operable + * frequency/voltage list. + */ + blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADD, new_opp); + return 0; + +free_opp: + _opp_free(new_opp); + + return ret; +} + +/** + * dev_pm_opp_set_supported_hw() - Set supported platforms + * @dev: Device for which supported-hw has to be set. + * @versions: Array of hierarchy of versions to match. + * @count: Number of elements in the array. + * + * This is required only for the V2 bindings, and it enables a platform to + * specify the hierarchy of versions it supports. OPP layer will then enable + * OPPs, which are available for those versions, based on its 'opp-supported-hw' + * property. + */ +struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev, + const u32 *versions, unsigned int count) +{ + struct opp_table *opp_table; + int ret; + + opp_table = dev_pm_opp_get_opp_table(dev); + if (!opp_table) + return ERR_PTR(-ENOMEM); + + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list)); + + /* Do we already have a version hierarchy associated with opp_table? */ + if (opp_table->supported_hw) { + dev_err(dev, "%s: Already have supported hardware list\n", + __func__); + ret = -EBUSY; + goto err; + } + + opp_table->supported_hw = kmemdup(versions, count * sizeof(*versions), + GFP_KERNEL); + if (!opp_table->supported_hw) { + ret = -ENOMEM; + goto err; + } + + opp_table->supported_hw_count = count; + + return opp_table; + +err: + dev_pm_opp_put_opp_table(opp_table); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_supported_hw); + +/** + * dev_pm_opp_put_supported_hw() - Releases resources blocked for supported hw + * @opp_table: OPP table returned by dev_pm_opp_set_supported_hw(). + * + * This is required only for the V2 bindings, and is called for a matching + * dev_pm_opp_set_supported_hw(). Until this is called, the opp_table structure + * will not be freed. + */ +void dev_pm_opp_put_supported_hw(struct opp_table *opp_table) +{ + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list)); + + if (!opp_table->supported_hw) { + pr_err("%s: Doesn't have supported hardware list\n", + __func__); + return; + } + + kfree(opp_table->supported_hw); + opp_table->supported_hw = NULL; + opp_table->supported_hw_count = 0; + + dev_pm_opp_put_opp_table(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw); + +/** + * dev_pm_opp_set_prop_name() - Set prop-extn name + * @dev: Device for which the prop-name has to be set. + * @name: name to postfix to properties. + * + * This is required only for the V2 bindings, and it enables a platform to + * specify the extn to be used for certain property names. The properties to + * which the extension will apply are opp-microvolt and opp-microamp. OPP core + * should postfix the property name with -<name> while looking for them. + */ +struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name) +{ + struct opp_table *opp_table; + int ret; + + opp_table = dev_pm_opp_get_opp_table(dev); + if (!opp_table) + return ERR_PTR(-ENOMEM); + + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list)); + + /* Do we already have a prop-name associated with opp_table? */ + if (opp_table->prop_name) { + dev_err(dev, "%s: Already have prop-name %s\n", __func__, + opp_table->prop_name); + ret = -EBUSY; + goto err; + } + + opp_table->prop_name = kstrdup(name, GFP_KERNEL); + if (!opp_table->prop_name) { + ret = -ENOMEM; + goto err; + } + + return opp_table; + +err: + dev_pm_opp_put_opp_table(opp_table); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_prop_name); + +/** + * dev_pm_opp_put_prop_name() - Releases resources blocked for prop-name + * @opp_table: OPP table returned by dev_pm_opp_set_prop_name(). + * + * This is required only for the V2 bindings, and is called for a matching + * dev_pm_opp_set_prop_name(). Until this is called, the opp_table structure + * will not be freed. + */ +void dev_pm_opp_put_prop_name(struct opp_table *opp_table) +{ + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list)); + + if (!opp_table->prop_name) { + pr_err("%s: Doesn't have a prop-name\n", __func__); + return; + } + + kfree(opp_table->prop_name); + opp_table->prop_name = NULL; + + dev_pm_opp_put_opp_table(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name); + +static int _allocate_set_opp_data(struct opp_table *opp_table) +{ + struct dev_pm_set_opp_data *data; + int len, count = opp_table->regulator_count; + + if (WARN_ON(!count)) + return -EINVAL; + + /* space for set_opp_data */ + len = sizeof(*data); + + /* space for old_opp.supplies and new_opp.supplies */ + len += 2 * sizeof(struct dev_pm_opp_supply) * count; + + data = kzalloc(len, GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->old_opp.supplies = (void *)(data + 1); + data->new_opp.supplies = data->old_opp.supplies + count; + + opp_table->set_opp_data = data; + + return 0; +} + +static void _free_set_opp_data(struct opp_table *opp_table) +{ + kfree(opp_table->set_opp_data); + opp_table->set_opp_data = NULL; +} + +/** + * dev_pm_opp_set_regulators() - Set regulator names for the device + * @dev: Device for which regulator name is being set. + * @names: Array of pointers to the names of the regulator. + * @count: Number of regulators. + * + * In order to support OPP switching, OPP layer needs to know the name of the + * device's regulators, as the core would be required to switch voltages as + * well. + * + * This must be called before any OPPs are initialized for the device. + */ +struct opp_table *dev_pm_opp_set_regulators(struct device *dev, + const char * const names[], + unsigned int count) +{ + struct opp_table *opp_table; + struct regulator *reg; + int ret, i; + + opp_table = dev_pm_opp_get_opp_table(dev); + if (!opp_table) + return ERR_PTR(-ENOMEM); + + /* This should be called before OPPs are initialized */ + if (WARN_ON(!list_empty(&opp_table->opp_list))) { + ret = -EBUSY; + goto err; + } + + /* Already have regulators set */ + if (opp_table->regulators) { + ret = -EBUSY; + goto err; + } + + opp_table->regulators = kmalloc_array(count, + sizeof(*opp_table->regulators), + GFP_KERNEL); + if (!opp_table->regulators) { + ret = -ENOMEM; + goto err; + } + + for (i = 0; i < count; i++) { + reg = regulator_get_optional(dev, names[i]); + if (IS_ERR(reg)) { + ret = PTR_ERR(reg); + if (ret != -EPROBE_DEFER) + dev_err(dev, "%s: no regulator (%s) found: %d\n", + __func__, names[i], ret); + goto free_regulators; + } + + opp_table->regulators[i] = reg; + } + + opp_table->regulator_count = count; + + /* Allocate block only once to pass to set_opp() routines */ + ret = _allocate_set_opp_data(opp_table); + if (ret) + goto free_regulators; + + return opp_table; + +free_regulators: + while (i != 0) + regulator_put(opp_table->regulators[--i]); + + kfree(opp_table->regulators); + opp_table->regulators = NULL; + opp_table->regulator_count = 0; +err: + dev_pm_opp_put_opp_table(opp_table); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulators); + +/** + * dev_pm_opp_put_regulators() - Releases resources blocked for regulator + * @opp_table: OPP table returned from dev_pm_opp_set_regulators(). + */ +void dev_pm_opp_put_regulators(struct opp_table *opp_table) +{ + int i; + + if (!opp_table->regulators) { + pr_err("%s: Doesn't have regulators set\n", __func__); + return; + } + + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list)); + + for (i = opp_table->regulator_count - 1; i >= 0; i--) + regulator_put(opp_table->regulators[i]); + + _free_set_opp_data(opp_table); + + kfree(opp_table->regulators); + opp_table->regulators = NULL; + opp_table->regulator_count = 0; + + dev_pm_opp_put_opp_table(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators); + +/** + * dev_pm_opp_set_clkname() - Set clk name for the device + * @dev: Device for which clk name is being set. + * @name: Clk name. + * + * In order to support OPP switching, OPP layer needs to get pointer to the + * clock for the device. Simple cases work fine without using this routine (i.e. + * by passing connection-id as NULL), but for a device with multiple clocks + * available, the OPP core needs to know the exact name of the clk to use. + * + * This must be called before any OPPs are initialized for the device. + */ +struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name) +{ + struct opp_table *opp_table; + int ret; + + opp_table = dev_pm_opp_get_opp_table(dev); + if (!opp_table) + return ERR_PTR(-ENOMEM); + + /* This should be called before OPPs are initialized */ + if (WARN_ON(!list_empty(&opp_table->opp_list))) { + ret = -EBUSY; + goto err; + } + + /* Already have default clk set, free it */ + if (!IS_ERR(opp_table->clk)) + clk_put(opp_table->clk); + + /* Find clk for the device */ + opp_table->clk = clk_get(dev, name); + if (IS_ERR(opp_table->clk)) { + ret = PTR_ERR(opp_table->clk); + if (ret != -EPROBE_DEFER) { + dev_err(dev, "%s: Couldn't find clock: %d\n", __func__, + ret); + } + goto err; + } + + return opp_table; + +err: + dev_pm_opp_put_opp_table(opp_table); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_clkname); + +/** + * dev_pm_opp_put_clkname() - Releases resources blocked for clk. + * @opp_table: OPP table returned from dev_pm_opp_set_clkname(). + */ +void dev_pm_opp_put_clkname(struct opp_table *opp_table) +{ + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list)); + + clk_put(opp_table->clk); + opp_table->clk = ERR_PTR(-EINVAL); + + dev_pm_opp_put_opp_table(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname); + +/** + * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper + * @dev: Device for which the helper is getting registered. + * @set_opp: Custom set OPP helper. + * + * This is useful to support complex platforms (like platforms with multiple + * regulators per device), instead of the generic OPP set rate helper. + * + * This must be called before any OPPs are initialized for the device. + */ +struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, + int (*set_opp)(struct dev_pm_set_opp_data *data)) +{ + struct opp_table *opp_table; + int ret; + + if (!set_opp) + return ERR_PTR(-EINVAL); + + opp_table = dev_pm_opp_get_opp_table(dev); + if (!opp_table) + return ERR_PTR(-ENOMEM); + + /* This should be called before OPPs are initialized */ + if (WARN_ON(!list_empty(&opp_table->opp_list))) { + ret = -EBUSY; + goto err; + } + + /* Already have custom set_opp helper */ + if (WARN_ON(opp_table->set_opp)) { + ret = -EBUSY; + goto err; + } + + opp_table->set_opp = set_opp; + + return opp_table; + +err: + dev_pm_opp_put_opp_table(opp_table); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_register_set_opp_helper); + +/** + * dev_pm_opp_unregister_set_opp_helper() - Releases resources blocked for + * set_opp helper + * @opp_table: OPP table returned from dev_pm_opp_register_set_opp_helper(). + * + * Release resources blocked for platform specific set_opp helper. + */ +void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table) +{ + if (!opp_table->set_opp) { + pr_err("%s: Doesn't have custom set_opp helper set\n", + __func__); + return; + } + + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list)); + + opp_table->set_opp = NULL; + + dev_pm_opp_put_opp_table(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_unregister_set_opp_helper); + +/** + * dev_pm_opp_register_get_pstate_helper() - Register get_pstate() helper. + * @dev: Device for which the helper is getting registered. + * @get_pstate: Helper. + * + * TODO: Remove this callback after the same information is available via Device + * Tree. + * + * This allows a platform to initialize the performance states of individual + * OPPs for its devices, until we get similar information directly from DT. + * + * This must be called before the OPPs are initialized for the device. + */ +struct opp_table *dev_pm_opp_register_get_pstate_helper(struct device *dev, + int (*get_pstate)(struct device *dev, unsigned long rate)) +{ + struct opp_table *opp_table; + int ret; + + if (!get_pstate) + return ERR_PTR(-EINVAL); + + opp_table = dev_pm_opp_get_opp_table(dev); + if (!opp_table) + return ERR_PTR(-ENOMEM); + + /* This should be called before OPPs are initialized */ + if (WARN_ON(!list_empty(&opp_table->opp_list))) { + ret = -EBUSY; + goto err; + } + + /* Already have genpd_performance_state set */ + if (WARN_ON(opp_table->genpd_performance_state)) { + ret = -EBUSY; + goto err; + } + + opp_table->genpd_performance_state = true; + opp_table->get_pstate = get_pstate; + + return opp_table; + +err: + dev_pm_opp_put_opp_table(opp_table); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_register_get_pstate_helper); + +/** + * dev_pm_opp_unregister_get_pstate_helper() - Releases resources blocked for + * get_pstate() helper + * @opp_table: OPP table returned from dev_pm_opp_register_get_pstate_helper(). + * + * Release resources blocked for platform specific get_pstate() helper. + */ +void dev_pm_opp_unregister_get_pstate_helper(struct opp_table *opp_table) +{ + if (!opp_table->genpd_performance_state) { + pr_err("%s: Doesn't have performance states set\n", + __func__); + return; + } + + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list)); + + opp_table->genpd_performance_state = false; + opp_table->get_pstate = NULL; + + dev_pm_opp_put_opp_table(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_unregister_get_pstate_helper); + +/** + * dev_pm_opp_add() - Add an OPP table from a table definitions + * @dev: device for which we do this operation + * @freq: Frequency in Hz for this OPP + * @u_volt: Voltage in uVolts for this OPP + * + * This function adds an opp definition to the opp table and returns status. + * The opp is made available by default and it can be controlled using + * dev_pm_opp_enable/disable functions. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + */ +int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) +{ + struct opp_table *opp_table; + int ret; + + opp_table = dev_pm_opp_get_opp_table(dev); + if (!opp_table) + return -ENOMEM; + + ret = _opp_add_v1(opp_table, dev, freq, u_volt, true); + + dev_pm_opp_put_opp_table(opp_table); + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_add); + +/** + * _opp_set_availability() - helper to set the availability of an opp + * @dev: device for which we do this operation + * @freq: OPP frequency to modify availability + * @availability_req: availability status requested for this opp + * + * Set the availability of an OPP, opp_{enable,disable} share a common logic + * which is isolated here. + * + * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the + * copy operation, returns 0 if no modification was done OR modification was + * successful. + */ +static int _opp_set_availability(struct device *dev, unsigned long freq, + bool availability_req) +{ + struct opp_table *opp_table; + struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV); + int r = 0; + + /* Find the opp_table */ + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + r = PTR_ERR(opp_table); + dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); + return r; + } + + mutex_lock(&opp_table->lock); + + /* Do we have the frequency? */ + list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { + if (tmp_opp->rate == freq) { + opp = tmp_opp; + break; + } + } + + if (IS_ERR(opp)) { + r = PTR_ERR(opp); + goto unlock; + } + + /* Is update really needed? */ + if (opp->available == availability_req) + goto unlock; + + opp->available = availability_req; + + dev_pm_opp_get(opp); + mutex_unlock(&opp_table->lock); + + /* Notify the change of the OPP availability */ + if (availability_req) + blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ENABLE, + opp); + else + blocking_notifier_call_chain(&opp_table->head, + OPP_EVENT_DISABLE, opp); + + dev_pm_opp_put(opp); + goto put_table; + +unlock: + mutex_unlock(&opp_table->lock); +put_table: + dev_pm_opp_put_opp_table(opp_table); + return r; +} + +/** + * dev_pm_opp_enable() - Enable a specific OPP + * @dev: device for which we do this operation + * @freq: OPP frequency to enable + * + * Enables a provided opp. If the operation is valid, this returns 0, else the + * corresponding error value. It is meant to be used for users an OPP available + * after being temporarily made unavailable with dev_pm_opp_disable. + * + * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the + * copy operation, returns 0 if no modification was done OR modification was + * successful. + */ +int dev_pm_opp_enable(struct device *dev, unsigned long freq) +{ + return _opp_set_availability(dev, freq, true); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_enable); + +/** + * dev_pm_opp_disable() - Disable a specific OPP + * @dev: device for which we do this operation + * @freq: OPP frequency to disable + * + * Disables a provided opp. If the operation is valid, this returns + * 0, else the corresponding error value. It is meant to be a temporary + * control by users to make this OPP not available until the circumstances are + * right to make it available again (with a call to dev_pm_opp_enable). + * + * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the + * copy operation, returns 0 if no modification was done OR modification was + * successful. + */ +int dev_pm_opp_disable(struct device *dev, unsigned long freq) +{ + return _opp_set_availability(dev, freq, false); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_disable); + +/** + * dev_pm_opp_register_notifier() - Register OPP notifier for the device + * @dev: Device for which notifier needs to be registered + * @nb: Notifier block to be registered + * + * Return: 0 on success or a negative error value. + */ +int dev_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb) +{ + struct opp_table *opp_table; + int ret; + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return PTR_ERR(opp_table); + + ret = blocking_notifier_chain_register(&opp_table->head, nb); + + dev_pm_opp_put_opp_table(opp_table); + + return ret; +} +EXPORT_SYMBOL(dev_pm_opp_register_notifier); + +/** + * dev_pm_opp_unregister_notifier() - Unregister OPP notifier for the device + * @dev: Device for which notifier needs to be unregistered + * @nb: Notifier block to be unregistered + * + * Return: 0 on success or a negative error value. + */ +int dev_pm_opp_unregister_notifier(struct device *dev, + struct notifier_block *nb) +{ + struct opp_table *opp_table; + int ret; + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return PTR_ERR(opp_table); + + ret = blocking_notifier_chain_unregister(&opp_table->head, nb); + + dev_pm_opp_put_opp_table(opp_table); + + return ret; +} +EXPORT_SYMBOL(dev_pm_opp_unregister_notifier); + +/* + * Free OPPs either created using static entries present in DT or even the + * dynamically added entries based on remove_all param. + */ +void _dev_pm_opp_remove_table(struct opp_table *opp_table, struct device *dev, + bool remove_all) +{ + struct dev_pm_opp *opp, *tmp; + + /* Find if opp_table manages a single device */ + if (list_is_singular(&opp_table->dev_list)) { + /* Free static OPPs */ + list_for_each_entry_safe(opp, tmp, &opp_table->opp_list, node) { + if (remove_all || !opp->dynamic) + dev_pm_opp_put(opp); + } + + /* + * The OPP table is getting removed, drop the performance state + * constraints. + */ + if (opp_table->genpd_performance_state) + dev_pm_genpd_set_performance_state(dev, 0); + } else { + _remove_opp_dev(_find_opp_dev(dev, opp_table), opp_table); + } +} + +void _dev_pm_opp_find_and_remove_table(struct device *dev, bool remove_all) +{ + struct opp_table *opp_table; + + /* Check for existing table for 'dev' */ + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + int error = PTR_ERR(opp_table); + + if (error != -ENODEV) + WARN(1, "%s: opp_table: %d\n", + IS_ERR_OR_NULL(dev) ? + "Invalid device" : dev_name(dev), + error); + return; + } + + _dev_pm_opp_remove_table(opp_table, dev, remove_all); + + dev_pm_opp_put_opp_table(opp_table); +} + +/** + * dev_pm_opp_remove_table() - Free all OPPs associated with the device + * @dev: device pointer used to lookup OPP table. + * + * Free both OPPs created using static entries present in DT and the + * dynamically added entries. + */ +void dev_pm_opp_remove_table(struct device *dev) +{ + _dev_pm_opp_find_and_remove_table(dev, true); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_remove_table); |