1038 files changed, 18789 insertions, 20313 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8d0314dbd946..583f66cd5bbd 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2,9 +2,6 @@
 # Network device configuration
 #
 
-config HAVE_NET_MACB
-	bool
-
 menuconfig NETDEVICES
 	default y if UML
 	depends on NET
@@ -28,18 +25,32 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
-config IFB
-	tristate "Intermediate Functional Block support"
-	depends on NET_CLS_ACT
+config NET_CORE
+	default y
+	bool "Network core driver support"
 	---help---
-	  This is an intermediate driver that allows sharing of
-	  resources.
+	  You can say N here if you do not intend to use any of the
+	  networking core drivers (i.e. VLAN, bridging, bonding, etc.)
+
+if NET_CORE
+
+config BONDING
+	tristate "Bonding driver support"
+	depends on INET
+	depends on IPV6 || IPV6=n
+	---help---
+	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+	  Channels together. This is called 'Etherchannel' by Cisco,
+	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+
+	  The driver supports multiple bonding modes to allow for both high
+	  performance and high availability operation.
+
+	  Refer to <file:Documentation/networking/bonding.txt> for more
+	  information.
+
 	  To compile this driver as a module, choose M here: the module
-	  will be called ifb.  If you want to use more than one ifb
-	  device at a time, you need to compile this driver as a module.
-	  Instead of 'ifb', the devices will then be called 'ifb0',
-	  'ifb1' etc.
-	  Look at the iproute2 documentation directory for usage etc
+	  will be called bonding.
 
 config DUMMY
 	tristate "Dummy net driver support"
@@ -60,23 +71,59 @@ config DUMMY
 	  Instead of 'dummy', the devices will then be called 'dummy0',
 	  'dummy1' etc.
 
-config BONDING
-	tristate "Bonding driver support"
-	depends on INET
-	depends on IPV6 || IPV6=n
+config EQUALIZER
+	tristate "EQL (serial line load balancing) support"
 	---help---
-	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
-	  Channels together. This is called 'Etherchannel' by Cisco,
-	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+	  If you have two serial connections to some other computer (this
+	  usually requires two modems and two telephone lines) and you use
+	  SLIP (the protocol for sending Internet traffic over telephone
+	  lines) or PPP (a better SLIP) on them, you can make them behave like
+	  one double speed connection using this driver.  Naturally, this has
+	  to be supported at the other end as well, either with a similar EQL
+	  Linux driver or with a Livingston Portmaster 2e.
 
-	  The driver supports multiple bonding modes to allow for both high
-	  performance and high availability operation.
+	  Say Y if you want this and read
+	  <file:Documentation/networking/eql.txt>.  You may also want to read
+	  section 6.2 of the NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
 
-	  Refer to <file:Documentation/networking/bonding.txt> for more
-	  information.
+	  To compile this driver as a module, choose M here: the module
+	  will be called eql.  If unsure, say N.
+
+config NET_FC
+	bool "Fibre Channel driver support"
+	depends on SCSI && PCI
+	help
+	  Fibre Channel is a high speed serial protocol mainly used to connect
+	  large storage devices to the computer; it is compatible with and
+	  intended to replace SCSI.
+
+	  If you intend to use Fibre Channel, you need to have a Fibre channel
+	  adaptor card in your computer; say Y here and to the driver for your
+	  adaptor below. You also should have said Y to "SCSI support" and
+	  "SCSI generic support".
+
+config MII
+	tristate "Generic Media Independent Interface device support"
+	help
+	  Most ethernet controllers have MII transceiver either as an external
+	  or internal device.  It is safe to say Y or M here even if your
+	  ethernet card lacks MII.
 
+source "drivers/ieee802154/Kconfig"
+
+config IFB
+	tristate "Intermediate Functional Block support"
+	depends on NET_CLS_ACT
+	---help---
+	  This is an intermediate driver that allows sharing of
+	  resources.
 	  To compile this driver as a module, choose M here: the module
-	  will be called bonding.
+	  will be called ifb.  If you want to use more than one ifb
+	  device at a time, you need to compile this driver as a module.
+	  Instead of 'ifb', the devices will then be called 'ifb0',
+	  'ifb1' etc.
+	  Look at the iproute2 documentation directory for usage etc
 
 config MACVLAN
 	tristate "MAC-VLAN support (EXPERIMENTAL)"
@@ -105,24 +152,46 @@ config MACVTAP
 	  To compile this driver as a module, choose M here: the module
 	  will be called macvtap.
 
-config EQUALIZER
-	tristate "EQL (serial line load balancing) support"
+config NETCONSOLE
+	tristate "Network console logging support"
 	---help---
-	  If you have two serial connections to some other computer (this
-	  usually requires two modems and two telephone lines) and you use
-	  SLIP (the protocol for sending Internet traffic over telephone
-	  lines) or PPP (a better SLIP) on them, you can make them behave like
-	  one double speed connection using this driver.  Naturally, this has
-	  to be supported at the other end as well, either with a similar EQL
-	  Linux driver or with a Livingston Portmaster 2e.
+	If you want to log kernel messages over the network, enable this.
+	See <file:Documentation/networking/netconsole.txt> for details.
 
-	  Say Y if you want this and read
-	  <file:Documentation/networking/eql.txt>.  You may also want to read
-	  section 6.2 of the NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+config NETCONSOLE_DYNAMIC
+	bool "Dynamic reconfiguration of logging targets"
+	depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
+			!(NETCONSOLE=y && CONFIGFS_FS=m)
+	help
+	  This option enables the ability to dynamically reconfigure target
+	  parameters (interface, IP addresses, port numbers, MAC addresses)
+	  at runtime through a userspace interface exported using configfs.
+	  See <file:Documentation/networking/netconsole.txt> for details.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called eql.  If unsure, say N.
+config NETPOLL
+	def_bool NETCONSOLE
+
+config NETPOLL_TRAP
+	bool "Netpoll traffic trapping"
+	default n
+	depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+	def_bool NETPOLL
+
+config RIONET
+	tristate "RapidIO Ethernet over messaging driver support"
+	depends on RAPIDIO
+
+config RIONET_TX_SIZE
+	int "Number of outbound queue entries"
+	depends on RIONET
+	default "128"
+
+config RIONET_RX_SIZE
+	int "Number of inbound queue entries"
+	depends on RIONET
+	default "128"
 
 config TUN
 	tristate "Universal TUN/TAP device driver support"
@@ -154,6 +223,28 @@ config VETH
 	  When one end receives the packet it appears on its pair and vice
 	  versa.
 
+config VIRTIO_NET
+	tristate "Virtio network driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && VIRTIO
+	---help---
+	  This is the virtual network driver for virtio.  It can be used with
+	  lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
+
+endif # NET_CORE
+
+config SUNGEM_PHY
+	tristate
+
+source "drivers/net/arcnet/Kconfig"
+
+source "drivers/atm/Kconfig"
+
+source "drivers/net/caif/Kconfig"
+
+source "drivers/net/ethernet/Kconfig"
+
+source "drivers/net/fddi/Kconfig"
+
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
 	depends on PNP
@@ -178,2790 +269,26 @@ config NET_SB1000
 
 	  If you don't have this card, of course say N.
 
-source "drivers/net/arcnet/Kconfig"
-
-config MII
-	tristate "Generic Media Independent Interface device support"
-	help
-	  Most ethernet controllers have MII transceiver either as an external
-	  or internal device.  It is safe to say Y or M here even if your
-	  ethernet card lacks MII.
-
 source "drivers/net/phy/Kconfig"
 
-#
-#	Ethernet
-#
+source "drivers/net/plip/Kconfig"
 
-menuconfig NET_ETHERNET
-	bool "Ethernet (10 or 100Mbit)"
-	depends on !UML
-	---help---
-	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
-	  type of Local Area Network (LAN) in universities and companies.
-
-	  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
-	  coaxial cable, linking computers in a chain), 10BASE-T or twisted
-	  pair (10 Mbps over twisted pair cable, linking computers to central
-	  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
-	  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
-	  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
-	  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
-	  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
-	  Ethernet (1 Gbps over optical fiber or short copper links).
-
-	  If your Linux machine will be connected to an Ethernet and you have
-	  an Ethernet network interface card (NIC) installed in your computer,
-	  say Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. You will then also have
-	  to say Y to the driver for your particular NIC.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about Ethernet network cards. If unsure, say N.
-
-if NET_ETHERNET
-
-config MACB
-	tristate "Atmel MACB support"
-	depends on HAVE_NET_MACB
-	select PHYLIB
-	help
-	  The Atmel MACB ethernet interface is found on many AT32 and AT91
-	  parts. Say Y to include support for the MACB chip.
+source "drivers/net/ppp/Kconfig"
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called macb.
+source "drivers/net/slip/Kconfig"
 
-source "drivers/net/arm/Kconfig"
-
-config AX88796
-	tristate "ASIX AX88796 NE2000 clone support"
-	depends on ARM || MIPS || SUPERH
-	select PHYLIB
-	select MDIO_BITBANG
-	help
-	  AX88796 driver, using platform bus to provide
-	  chip detection and resources
-
-config AX88796_93CX6
-	bool "ASIX AX88796 external 93CX6 eeprom support"
-	depends on AX88796
-	select EEPROM_93CX6
-	help
-	  Select this if your platform comes with an external 93CX6 eeprom.
-
-config MACE
-	tristate "MACE (Power Mac ethernet) support"
-	depends on PPC_PMAC && PPC32
-	select CRC32
-	help
-	  Power Macintoshes and clones with Ethernet built-in on the
-	  motherboard will usually use a MACE (Medium Access Control for
-	  Ethernet) interface. Say Y to include support for the MACE chip.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called mace.
-
-config MACE_AAUI_PORT
-	bool "Use AAUI port instead of TP by default"
-	depends on MACE
-	help
-	  Some Apple machines (notably the Apple Network Server) which use the
-	  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
-	  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
-	  Y here if you have such a machine.  If unsure, say N.
-	  The driver will default to AAUI on ANS anyway, and if you use it as
-	  a module, you can provide the port_aaui=0|1 to force the driver.
-
-config BMAC
-	tristate "BMAC (G3 ethernet) support"
-	depends on PPC_PMAC && PPC32
-	select CRC32
-	help
-	  Say Y for support of BMAC Ethernet interfaces. These are used on G3
-	  computers.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called bmac.
-
-config ARIADNE
-	tristate "Ariadne support"
-	depends on ZORRO
-	help
-	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
-	  Otherwise, say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ariadne.
-
-config A2065
-	tristate "A2065 support"
-	depends on ZORRO
-	select CRC32
-	help
-	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
-	  say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called a2065.
-
-config HYDRA
-	tristate "Hydra support"
-	depends on ZORRO
-	select CRC32
-	help
-	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called hydra.
-
-config ZORRO8390
-	tristate "Zorro NS8390-based Ethernet support"
-	depends on ZORRO
-	select CRC32
-	help
-	  This driver is for Zorro Ethernet cards using an NS8390-compatible
-	  chipset, like the Village Tronic Ariadne II and the Individual
-	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
-	  Otherwise, say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called zorro8390.
-
-config APNE
-	tristate "PCMCIA NE2000 support"
-	depends on AMIGA_PCMCIA
-	select CRC32
-	help
-	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
-	  say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called apne.
-
-config MAC8390
-	bool "Macintosh NS 8390 based ethernet cards"
-	depends on MAC
-	select CRC32
-	help
-	  If you want to include a driver to support Nubus or LC-PDS
-	  Ethernet cards using an NS8390 chipset or its equivalent, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-config MAC89x0
-	tristate "Macintosh CS89x0 based ethernet cards"
-	depends on MAC
-	---help---
-	  Support for CS89x0 chipset based Ethernet cards.  If you have a
-	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. This module will
-	  be called mac89x0.
-
-config MACSONIC
-	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
-	depends on MAC
-	---help---
-	  Support for NatSemi SONIC based Ethernet devices.  This includes
-	  the onboard Ethernet in many Quadras as well as some LC-PDS,
-	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
-	  one of these say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. This module will
-	  be called macsonic.
-
-config MACMACE
-	bool "Macintosh (AV) onboard MACE ethernet"
-	depends on MAC
-	select CRC32
-	help
-	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
-	  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
-	  say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-config MVME147_NET
-	tristate "MVME147 (Lance) Ethernet support"
-	depends on MVME147
-	select CRC32
-	help
-	  Support for the on-board Ethernet interface on the Motorola MVME147
-	  single-board computer.  Say Y here to include the
-	  driver for this chip in your kernel.
-	  To compile this driver as a module, choose M here.
-
-config MVME16x_NET
-	tristate "MVME16x Ethernet support"
-	depends on MVME16x
-	help
-	  This is the driver for the Ethernet interface on the Motorola
-	  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
-	  driver for this chip in your kernel.
-	  To compile this driver as a module, choose M here.
-
-config BVME6000_NET
-	tristate "BVME6000 Ethernet support"
-	depends on BVME6000
-	help
-	  This is the driver for the Ethernet interface on BVME4000 and
-	  BVME6000 VME boards.  Say Y here to include the driver for this chip
-	  in your kernel.
-	  To compile this driver as a module, choose M here.
-
-config ATARILANCE
-	tristate "Atari Lance support"
-	depends on ATARI
-	help
-	  Say Y to include support for several Atari Ethernet adapters based
-	  on the AMD Lance chipset: RieblCard (with or without battery), or
-	  PAMCard VME (also the version by Rhotron, with different addresses).
-
-config SUN3LANCE
-	tristate "Sun3/Sun3x on-board LANCE support"
-	depends on SUN3 || SUN3X
-	help
-	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
-	  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
-	  here to compile in the Linux driver for this and enable Ethernet.
-	  General Linux information on the Sun 3 and 3x series (now
-	  discontinued) is at
-	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-	  If you're not building a kernel for a Sun 3, say N.
-
-config SUN3_82586
-	bool "Sun3 on-board Intel 82586 support"
-	depends on SUN3
-	help
-	  This driver enables support for the on-board Intel 82586 based
-	  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
-	  that this driver does not support 82586-based adapters on additional
-	  VME boards.
-
-config HPLANCE
-	bool "HP on-board LANCE support"
-	depends on DIO
-	select CRC32
-	help
-	  If you want to use the builtin "LANCE" Ethernet controller on an
-	  HP300 machine, say Y here.
-
-config LASI_82596
-	tristate "Lasi ethernet"
-	depends on GSC
-	help
-	  Say Y here to support the builtin Intel 82596 ethernet controller
-	  found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
-
-config SNI_82596
-	tristate "SNI RM ethernet"
-	depends on NET_ETHERNET && SNI_RM
-	help
-	  Say Y here to support the on-board Intel 82596 ethernet controller
-	  built into SNI RM machines.
-
-config KORINA
-	tristate "Korina (IDT RC32434) Ethernet support"
-	depends on NET_ETHERNET && MIKROTIK_RB532
-	help
-	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
-	  based system say Y. Otherwise say N.
-
-config MIPS_JAZZ_SONIC
-	tristate "MIPS JAZZ onboard SONIC Ethernet support"
-	depends on MACH_JAZZ
-	help
-	  This is the driver for the onboard card of MIPS Magnum 4000,
-	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
-
-config XTENSA_XT2000_SONIC
-	tristate "Xtensa XT2000 onboard SONIC Ethernet support"
-	depends on XTENSA_PLATFORM_XT2000
-	help
-	  This is the driver for the onboard card of the Xtensa XT2000 board.
-
-config MIPS_AU1X00_ENET
-	tristate "MIPS AU1000 Ethernet support"
-	depends on MIPS_ALCHEMY
-	select PHYLIB
-	select CRC32
-	help
-	  If you have an Alchemy Semi AU1X00 based system
-	  say Y.  Otherwise, say N.
-
-config SGI_IOC3_ETH
-	bool "SGI IOC3 Ethernet"
-	depends on PCI && SGI_IP27
-	select CRC32
-	select MII
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-config MIPS_SIM_NET
-	tristate "MIPS simulator Network device"
-	depends on MIPS_SIM
-	help
-	  The MIPSNET device is a simple Ethernet network device which is
-	  emulated by the MIPS Simulator.
-	  If you are not using a MIPSsim or are unsure, say N.
-
-config SGI_O2MACE_ETH
-	tristate "SGI O2 MACE Fast Ethernet support"
-	depends on SGI_IP32=y
-
-config STNIC
-	tristate "National DP83902AV  support"
-	depends on SUPERH
-	select CRC32
-	help
-	  Support for cards based on the National Semiconductor DP83902AV
-	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
-	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
-	  <http://www.national.com/pf/DP/DP83902A.html>.
-
-	  If unsure, say N.
-
-config SH_ETH
-	tristate "Renesas SuperH Ethernet support"
-	depends on SUPERH && \
-		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
-		 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
-		 CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757)
-	select CRC32
-	select MII
-	select MDIO_BITBANG
-	select PHYLIB
-	help
-	  Renesas SuperH Ethernet device driver.
-	  This driver supporting CPUs are:
-		- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
-
-config SUNLANCE
-	tristate "Sun LANCE support"
-	depends on SBUS
-	select CRC32
-	help
-	  This driver supports the "le" interface present on all 32-bit Sparc
-	  systems, on some older Ultra systems and as an Sbus option.  These
-	  cards are based on the AMD Lance chipset, which is better known
-	  via the NE2100 cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunlance.
-
-config HAPPYMEAL
-	tristate "Sun Happy Meal 10/100baseT support"
-	depends on SBUS || PCI
-	select CRC32
-	help
-	  This driver supports the "hme" interface present on most Ultra
-	  systems and as an option on older Sbus systems. This driver supports
-	  both PCI and Sbus devices. This driver also supports the "qfe" quad
-	  100baseT device available in both PCI and Sbus configurations.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunhme.
-
-config SUNBMAC
-	tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
-	depends on SBUS && EXPERIMENTAL
-	select CRC32
-	help
-	  This driver supports the "be" interface available as an Sbus option.
-	  This is Sun's older 100baseT Ethernet device.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunbmac.
-
-config SUNQE
-	tristate "Sun QuadEthernet support"
-	depends on SBUS
-	select CRC32
-	help
-	  This driver supports the "qe" 10baseT Ethernet device, available as
-	  an Sbus option. Note that this is not the same as Quad FastEthernet
-	  "qfe" which is supported by the Happy Meal driver instead.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunqe.
-
-config SUNGEM
-	tristate "Sun GEM support"
-	depends on PCI
-	select CRC32
-	help
-	  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
-	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
-
-config CASSINI
-	tristate "Sun Cassini support"
-	depends on PCI
-	select CRC32
-	help
-	  Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
-	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
-
-config SUNVNET
-	tristate "Sun Virtual Network support"
-	depends on SUN_LDOMS
-	help
-	  Support for virtual network devices under Sun Logical Domains.
-
-config NET_VENDOR_3COM
-	bool "3COM cards"
-	depends on ISA || EISA || MCA || PCI
-	help
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about 3COM cards. If you say Y, you will be asked for
-	  your specific card in the following questions.
-
-config EL1
-	tristate "3c501 \"EtherLink\" support"
-	depends on NET_VENDOR_3COM && ISA
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Also, consider buying a
-	  new card, since the 3c501 is slow, broken, and obsolete: you will
-	  have problems.  Some people suggest to ping ("man ping") a nearby
-	  machine every minute ("man cron") when using this card.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c501.
-
-config EL2
-	tristate "3c503 \"EtherLink II\" support"
-	depends on NET_VENDOR_3COM && ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c503.
-
-config ELPLUS
-	tristate "3c505 \"EtherLink Plus\" support"
-	depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
-	---help---
-	  Information about this network (Ethernet) card can be found in
-	  <file:Documentation/networking/3c505.txt>.  If you have a card of
-	  this type, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c505.
-
-config EL16
-	tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
-	depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c507.
-
-config EL3
-	tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
-	depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
-	---help---
-	  If you have a network (Ethernet) card belonging to the 3Com
-	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
-	  from <http://www.tldp.org/docs.html#howto>.
-
-	  If your card is not working you may need to use the DOS
-	  setup disk to disable Plug & Play mode, and to select the default
-	  media type.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c509.
-
-config 3C515
-	tristate "3c515 ISA \"Fast EtherLink\""
-	depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
-	help
-	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
-	  network card, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c515.
-
-config ELMC
-	tristate "3c523 \"EtherLink/MC\" support"
-	depends on NET_VENDOR_3COM && MCA_LEGACY
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c523.
-
-config ELMC_II
-	tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
-	depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c527.
-
-config VORTEX
-	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
-	depends on NET_VENDOR_3COM && (PCI || EISA)
-	select MII
-	---help---
-	  This option enables driver support for a large number of 10Mbps and
-	  10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
-
-	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
-	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
-	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
-	  "Tornado"   (3c905)                                  PCI
-	  "Hurricane" (3c555/3cSOHO)                           PCI
-
-	  If you have such a card, say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>. More
-	  specific information is in
-	  <file:Documentation/networking/vortex.txt> and in the comments at
-	  the beginning of <file:drivers/net/3c59x.c>.
-
-	  To compile this support as a module, choose M here.
-
-config TYPHOON
-	tristate "3cr990 series \"Typhoon\" support"
-	depends on NET_VENDOR_3COM && PCI
-	select CRC32
-	---help---
-	  This option enables driver support for the 3cr990 series of cards:
-
-	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
-	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
-	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
-
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called typhoon.
-
-config LANCE
-	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
-	depends on ISA && ISA_DMA_API
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
-	  of this type.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called lance.  This is recommended.
-
-config NET_VENDOR_SMC
-	bool "Western Digital/SMC cards"
-	depends on ISA || MCA || EISA || MAC
-	help
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about Western Digital cards. If you say Y, you will be
-	  asked for your specific card in the following questions.
-
-config WD80x3
-	tristate "WD80*3 support"
-	depends on NET_VENDOR_SMC && ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called wd.
-
-config ULTRAMCA
-	tristate "SMC Ultra MCA support"
-	depends on NET_VENDOR_SMC && MCA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type and are running
-	  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc-mca.
-
-config ULTRA
-	tristate "SMC Ultra support"
-	depends on NET_VENDOR_SMC && ISA
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Important: There have been many reports that, with some motherboards
-	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
-	  such as some BusLogic models) causes corruption problems with many
-	  operating systems. The Linux smc-ultra driver has a work-around for
-	  this but keep it in mind if you have such a SCSI card and have
-	  problems.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc-ultra.
-
-config ULTRA32
-	tristate "SMC Ultra32 EISA support"
-	depends on NET_VENDOR_SMC && EISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc-ultra32.
-
-config BFIN_MAC
-	tristate "Blackfin on-chip MAC support"
-	depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
-	select CRC32
-	select MII
-	select PHYLIB
-	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
-	help
-	  This is the driver for Blackfin on-chip mac device. Say Y if you want it
-	  compiled into the kernel. This driver is also available as a module
-	  ( = code which can be inserted in and removed from the running kernel
-	  whenever you want). The module will be called bfin_mac.
-
-config BFIN_MAC_USE_L1
-	bool "Use L1 memory for rx/tx packets"
-	depends on BFIN_MAC && (BF527 || BF537)
-	default y
-	help
-	  To get maximum network performance, you should use L1 memory as rx/tx buffers.
-	  Say N here if you want to reserve L1 memory for other uses.
-
-config BFIN_TX_DESC_NUM
-	int "Number of transmit buffer packets"
-	depends on BFIN_MAC
-	range 6 10 if BFIN_MAC_USE_L1
-	range 10 100
-	default "10"
-	help
-	  Set the number of buffer packets used in driver.
-
-config BFIN_RX_DESC_NUM
-	int "Number of receive buffer packets"
-	depends on BFIN_MAC
-	range 20 100 if BFIN_MAC_USE_L1
-	range 20 800
-	default "20"
-	help
-	  Set the number of buffer packets used in driver.
-
-config BFIN_MAC_USE_HWSTAMP
-	bool "Use IEEE 1588 hwstamp"
-	depends on BFIN_MAC && BF518
-	default y
-	help
-	  To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-
-config SMC9194
-	tristate "SMC 9194 support"
-	depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
-	select CRC32
-	---help---
-	  This is support for the SMC9xxx based Ethernet cards. Choose this
-	  option if you have a DELL laptop with the docking station, or
-	  another SMC9192/9194 based chipset.  Say Y if you want it compiled
-	  into the kernel, and read the file
-	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc9194.
-
-config SMC91X
-	tristate "SMC 91C9x/91C1xxx support"
-	select CRC32
-	select MII
-	depends on ARM || M32R || SUPERH || \
-		MIPS || BLACKFIN || MN10300 || COLDFIRE
-	help
-	  This is a driver for SMC's 91x series of Ethernet chipsets,
-	  including the SMC91C94 and the SMC91C111. Say Y if you want it
-	  compiled into the kernel, and read the file
-	  <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
-	  available from  <http://www.tldp.org/docs.html#howto>.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called smc91x.  If you want to compile it as a
-	  module, say M here and read <file:Documentation/kbuild/modules.txt>.
-
-config PXA168_ETH
-	tristate "Marvell pxa168 ethernet support"
-	depends on CPU_PXA168
-	select PHYLIB
-	help
-	  This driver supports the pxa168 Ethernet ports.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called pxa168_eth.
-
-config NET_NETX
-	tristate "NetX Ethernet support"
-	select MII
-	depends on ARCH_NETX
-	help
-	  This is support for the Hilscher netX builtin Ethernet ports
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called netx-eth.
-
-config TI_DAVINCI_EMAC
-	tristate "TI DaVinci EMAC Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	select TI_DAVINCI_MDIO
-	select TI_DAVINCI_CPDMA
-	select PHYLIB
-	help
-	  This driver supports TI's DaVinci Ethernet .
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_emac_driver.  This is recommended.
-
-config TI_DAVINCI_MDIO
-	tristate "TI DaVinci MDIO Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	select PHYLIB
-	help
-	  This driver supports TI's DaVinci MDIO module.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_mdio.  This is recommended.
-
-config TI_DAVINCI_CPDMA
-	tristate "TI DaVinci CPDMA Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	help
-	  This driver supports TI's DaVinci CPDMA dma engine.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_cpdma.  This is recommended.
-
-config DM9000
-	tristate "DM9000 support"
-	depends on ARM || BLACKFIN || MIPS
-	select CRC32
-	select MII
-	---help---
-	  Support for DM9000 chipset.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called dm9000.
-
-config DM9000_DEBUGLEVEL
-	int "DM9000 maximum debug level"
-	depends on DM9000
-	default 4
-	help
-	  The maximum level of debugging code compiled into the DM9000
-	  driver.
-
-config DM9000_FORCE_SIMPLE_PHY_POLL
-	bool "Force simple NSR based PHY polling"
-	depends on DM9000
-	---help---
-	  This configuration forces the DM9000 to use the NSR's LinkStatus
-	  bit to determine if the link is up or down instead of the more
-	  costly MII PHY reads. Note, this will not work if the chip is
-	  operating with an external PHY.
-
-config ENC28J60
-	tristate "ENC28J60 support"
-	depends on EXPERIMENTAL && SPI && NET_ETHERNET
-	select CRC32
-	---help---
-	  Support for the Microchip EN28J60 ethernet chip.
-
-	  To compile this driver as a module, choose M here. The module will be
-	  called enc28j60.
-
-config ENC28J60_WRITEVERIFY
-	bool "Enable write verify"
-	depends on ENC28J60
-	---help---
-	  Enable the verify after the buffer write useful for debugging purpose.
-	  If unsure, say N.
-
-config ETHOC
-	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
-	depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
-	select MII
-	select PHYLIB
-	select CRC32
-	select BITREVERSE
-	help
-	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
-
-config GRETH
-	tristate "Aeroflex Gaisler GRETH Ethernet MAC support"
-	depends on SPARC
-	select PHYLIB
-	select CRC32
-	help
-	  Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
-
-config SMC911X
-	tristate "SMSC LAN911[5678] support"
-	select CRC32
-	select MII
-	depends on ARM || SUPERH || MN10300
-	help
-	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
-	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
-	  Say Y if you want it compiled into the kernel, 
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  This driver is also available as a module. The module will be 
-	  called smc911x.  If you want to compile it as a module, say M 
-	  here and read <file:Documentation/kbuild/modules.txt>
-
-config SMSC911X
-	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
-	depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300
-	select CRC32
-	select MII
-	select PHYLIB
-	---help---
-	  Say Y here if you want support for SMSC LAN911x and LAN921x families
-	  of ethernet controllers.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
-	  will be called smsc911x.
-
-config SMSC911X_ARCH_HOOKS
-	def_bool n
-	depends on SMSC911X
-	help
-	  If the arch enables this, it allows the arch to implement various
-	  hooks for more comprehensive interrupt control and also to override
-	  the source of the MAC address.
-
-config NET_VENDOR_RACAL
-	bool "Racal-Interlan (Micom) NI cards"
-	depends on ISA
-	help
-	  If you have a network (Ethernet) card belonging to this class, such
-	  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about NI cards. If you say Y, you will be asked for
-	  your specific card in the following questions.
-
-config NI5010
-	tristate "NI5010 support (EXPERIMENTAL)"
-	depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Note that this is still
-	  experimental code.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni5010.
-
-config NI52
-	tristate "NI5210 support"
-	depends on NET_VENDOR_RACAL && ISA
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni52.
-
-config NI65
-	tristate "NI6510 support"
-	depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni65.
-
-config DNET
-	tristate "Dave ethernet support (DNET)"
-	depends on NET_ETHERNET && HAS_IOMEM
-	select PHYLIB
-	help
-	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
-	  Say Y to include support for the DNET chip.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called dnet.
-
-source "drivers/net/tulip/Kconfig"
-
-config AT1700
-	tristate "AT1700/1720 support (EXPERIMENTAL)"
-	depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called at1700.
-
-config DEPCA
-	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
-	depends on ISA || EISA || MCA
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto> as well as
-	  <file:drivers/net/depca.c>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called depca.
-
-config HP100
-	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
-	depends on ISA || EISA || PCI
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called hp100.
-
-config NET_ISA
-	bool "Other ISA cards"
-	depends on ISA
-	---help---
-	  If your network (Ethernet) card hasn't been mentioned yet and its
-	  bus system (that's the way the cards talks to the other components
-	  of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
-	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  If unsure, say Y.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the remaining ISA network card questions. If you say Y, you will be
-	  asked for your specific card in the following questions.
-
-config E2100
-	tristate "Cabletron E21xx support"
-	depends on NET_ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e2100.
-
-config EWRK3
-	tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
-	depends on NET_ISA
-	select CRC32
-	---help---
-	  This driver supports the DE203, DE204 and DE205 network (Ethernet)
-	  cards. If this is for you, say Y and read
-	  <file:Documentation/networking/ewrk3.txt> in the kernel source as
-	  well as the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ewrk3.
-
-config EEXPRESS
-	tristate "EtherExpress 16 support"
-	depends on NET_ISA
-	---help---
-	  If you have an EtherExpress16 network (Ethernet) card, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that the Intel
-	  EtherExpress16 card used to be regarded as a very poor choice
-	  because the driver was very unreliable. We now have a new driver
-	  that should do better.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eexpress.
-
-config EEXPRESS_PRO
-	tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
-	depends on NET_ISA
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y. This
-	  driver supports Intel i82595{FX,TX} based boards. Note however
-	  that the EtherExpress PRO/100 Ethernet card has its own separate
-	  driver.  Please read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eepro.
-
-config HPLAN_PLUS
-	tristate "HP PCLAN+ (27247B and 27252A) support"
-	depends on NET_ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called hp-plus.
-
-config HPLAN
-	tristate "HP PCLAN (27245 and other 27xxx series) support"
-	depends on NET_ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called hp.
-
-config LP486E
-	tristate "LP486E on board Ethernet"
-	depends on NET_ISA
-	help
-	  Say Y here to support the 82596-based on-board Ethernet controller
-	  for the Panther motherboard, which is one of the two shipped in the
-	  Intel Professional Workstation.
-
-config ETH16I
-	tristate "ICL EtherTeam 16i/32 support"
-	depends on NET_ISA
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eth16i.
-
-config NE2000
-	tristate "NE2000/NE1000 support"
-	depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
-	  without a specific driver are compatible with NE2000.
-
-	  If you have a PCI NE2000 card however, say N here and Y to "PCI
-	  NE2000 and clone support" under "EISA, VLB, PCI and on board
-	  controllers" below. If you have a NE2000 card and are running on
-	  an MCA system (a bus system used on some IBM PS/2 computers and
-	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
-	  below.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne.
-
-config ZNET
-	tristate "Zenith Z-Note support (EXPERIMENTAL)"
-	depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
-	help
-	  The Zenith Z-Note notebook computer has a built-in network
-	  (Ethernet) card, and this is the Linux driver for it. Note that the
-	  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
-	  by this driver. Read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-config SEEQ8005
-	tristate "SEEQ8005 support (EXPERIMENTAL)"
-	depends on NET_ISA && EXPERIMENTAL
-	help
-	  This is a driver for the SEEQ 8005 network (Ethernet) card.  If this
-	  is for you, read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called seeq8005.
-
-config NE2_MCA
-	tristate "NE/2 (ne2000 MCA version) support"
-	depends on MCA_LEGACY
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne2.
-
-config IBMLANA
-	tristate "IBM LAN Adapter/A support"
-	depends on MCA
-	---help---
-	  This is a Micro Channel Ethernet adapter.  You need to set
-	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
-	  driver and as a module.
-
-	  To compile this driver as a module, choose M here. The only
-	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
-	  will both support 16K and 32K memory windows, however a 32K window
-	  gives a better security against packet losses.  Usage of multiple
-	  boards with this driver should be possible, but has not been tested
-	  up to now due to lack of hardware.
-
-config IBMVETH
-	tristate "IBM LAN Virtual Ethernet support"
-	depends on PPC_PSERIES
-	---help---
-	  This driver supports virtual ethernet adapters on newer IBM iSeries
-	  and pSeries systems.
-
-	  To compile this driver as a module, choose M here. The module will
-	  be called ibmveth.
-
-source "drivers/net/ibm_newemac/Kconfig"
-
-config NET_PCI
-	bool "EISA, VLB, PCI and on board controllers"
-	depends on ISA || EISA || PCI
-	help
-	  This is another class of network cards which attach directly to the
-	  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about this class of network cards. If you say Y, you
-	  will be asked for your specific card in the following questions. If
-	  you are unsure, say Y.
-
-config PCNET32
-	tristate "AMD PCnet32 PCI support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called pcnet32.
-
-config AMD8111_ETH
-	tristate "AMD 8111 (new PCI lance) support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have an AMD 8111-based PCI lance ethernet card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called amd8111e.
-
-config ADAPTEC_STARFIRE
-	tristate "Adaptec Starfire/DuraLAN support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
-	  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
-	  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
-	  driver.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called starfire.  This is recommended.
-
-config AC3200
-	tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
-	depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ac3200.
-
-config KSZ884X_PCI
-	tristate "Micrel KSZ8841/2 PCI"
-	depends on NET_PCI && PCI
-	select MII
-	select CRC32
-	help
-	  This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ksz884x.
-
-config APRICOT
-	tristate "Apricot Xen-II on board Ethernet"
-	depends on NET_PCI && ISA
-	help
-	  If you have a network (Ethernet) controller of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called apricot.
-
-config B44
-	tristate "Broadcom 440x/47xx ethernet support"
-	depends on SSB_POSSIBLE && HAS_DMA
-	select SSB
-	select MII
-	help
-	  If you have a network (Ethernet) controller of this type, say Y
-	  or M and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called b44.
-
-# Auto-select SSB PCI-HOST support, if possible
-config B44_PCI_AUTOSELECT
-	bool
-	depends on B44 && SSB_PCIHOST_POSSIBLE
-	select SSB_PCIHOST
-	default y
-
-# Auto-select SSB PCICORE driver, if possible
-config B44_PCICORE_AUTOSELECT
-	bool
-	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
-	select SSB_DRIVER_PCICORE
-	default y
-
-config B44_PCI
-	bool
-	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
-	default y
-
-config FORCEDETH
-	tristate "nForce Ethernet support"
-	depends on NET_PCI && PCI
-	help
-	  If you have a network (Ethernet) controller of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called forcedeth.
-
-config CS89x0
-	tristate "CS89x0 support"
-	depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
-		|| ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
-	---help---
-	  Support for CS89x0 chipset based Ethernet cards. If you have a
-	  network (Ethernet) card of this type, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto> as well as
-	  <file:Documentation/networking/cs89x0.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called cs89x0.
-
-config CS89x0_NONISA_IRQ
-	def_bool y
-	depends on CS89x0 != n
-	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
-
-config TC35815
-	tristate "TOSHIBA TC35815 Ethernet support"
-	depends on NET_PCI && PCI && MIPS
-	select PHYLIB
-
-config E100
-	tristate "Intel(R) PRO/100+ support"
-	depends on NET_PCI && PCI
-	select MII
-	---help---
-	  This driver supports Intel(R) PRO/100 family of adapters.
-	  To verify that your adapter is supported, find the board ID number 
-	  on the adapter. Look for a label that has a barcode and a number 
-	  in the format 123456-001 (six digits hyphen three digits). 
-
-	  Use the above information and the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  to identify the adapter.
-
-	  For the latest Intel PRO/100 network driver for Linux, see:
-
-	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/e100.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e100.
-
-config LNE390
-	tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
-	depends on NET_PCI && EISA && EXPERIMENTAL
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called lne390.
-
-config FEALNX
-	tristate "Myson MTD-8xx PCI Ethernet support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
-	  cards. <http://www.myson.com.tw/>
-
-config NATSEMI
-	tristate "National Semiconductor DP8381x series PCI Ethernet support"
-	depends on NET_PCI && PCI
-	select CRC32
-	help
-	  This driver is for the National Semiconductor DP83810 series,
-	  which is used in cards from PureData, NetGear, Linksys
-	  and others, including the 83815 chip.
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/natsemi.html>.
-
-config NE2K_PCI
-	tristate "PCI NE2000 and clones support (see help)"
-	depends on NET_PCI && PCI
-	select CRC32
-	---help---
-	  This driver is for NE2000 compatible PCI cards. It will not work
-	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
-	  support" below). If you have a PCI NE2000 network (Ethernet) card,
-	  say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  This driver also works for the following NE2000 clone cards:
-	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
-	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
-	  Holtek HT80232    Holtek HT80229
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne2k-pci.
-
-config NE3210
-	tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
-	depends on NET_PCI && EISA && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that this driver
-	  will NOT WORK for NE3200 cards as they are completely different.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne3210.
-
-config ES3210
-	tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
-	depends on NET_PCI && EISA && EXPERIMENTAL
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called es3210.
-
-config 8139CP
-	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL8139C+ chips. If you have one of those, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8139cp.  This is recommended.
-
-config 8139TOO
-	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
-	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8139too.  This is recommended.
-
-config 8139TOO_PIO
-	bool "Use PIO instead of MMIO"
-	default y
-	depends on 8139TOO
-	help
-	  This instructs the driver to use programmed I/O ports (PIO) instead
-	  of PCI shared memory (MMIO).  This can possibly solve some problems
-	  in case your mainboard has memory consistency issues.  If unsure,
-	  say N.
-
-config 8139TOO_TUNE_TWISTER
-	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
-	depends on 8139TOO
-	help
-	  This implements a function which might come in handy in case you
-	  are using low quality on long cabling. It is required for RealTek
-	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
-	  to match the transceiver to the cable characteristics. This is
-	  experimental since hardly documented by the manufacturer.
-	  If unsure, say Y.
-
-config 8139TOO_8129
-	bool "Support for older RTL-8129/8130 boards"
-	depends on 8139TOO
-	help
-	  This enables support for the older and uncommon RTL-8129 and
-	  RTL-8130 chips, which support MII via an external transceiver,
-	  instead of an internal one.  Disabling this option will save some
-	  memory by making the code size smaller.  If unsure, say Y.
-
-config 8139_OLD_RX_RESET
-	bool "Use older RX-reset method"
-	depends on 8139TOO
-	help
-	  The 8139too driver was recently updated to contain a more rapid
-	  reset sequence, in the face of severe receive errors.  This "new"
-	  RX-reset method should be adequate for all boards.  But if you
-	  experience problems, you can enable this option to restore the
-	  old RX-reset behavior.  If unsure, say N.
-
-config R6040
-	tristate "RDC R6040 Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	select PHYLIB
-	help
-	  This is a driver for the R6040 Fast Ethernet MACs found in the
-	  the RDC R-321x System-on-chips.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called r6040. This is recommended.
-
-config SIS900
-	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
-	  SiS 630 and SiS 540 chipsets.
-
-	  This driver also supports AMD 79C901 HomePNA so that you can use
-	  your phone line as a network cable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sis900.  This is recommended.
-
-config EPIC100
-	tristate "SMC EtherPower II"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
-	  which is based on the SMC83c17x (EPIC/100).
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/epic100.html>.
-
-config SMSC9420
-	tristate "SMSC LAN9420 PCI ethernet adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select PHYLIB
-	select SMSC_PHY
-	help
-	  This is a driver for SMSC's LAN9420 PCI ethernet adapter.
-	  Say Y if you want it compiled into the kernel,
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  This driver is also available as a module. The module will be
-	  called smsc9420.  If you want to compile it as a module, say M
-	  here and read <file:Documentation/kbuild/modules.txt>
-
-config SUNDANCE
-	tristate "Sundance Alta support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  This driver is for the Sundance "Alta" chip.
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/sundance.html>.
-
-config SUNDANCE_MMIO
-	bool "Use MMIO instead of PIO"
-	depends on SUNDANCE
-	help
-	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
-	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
-	  is known to solve bugs on certain chips.
-
-	  If unsure, say N.
-
-config TLAN
-	tristate "TI ThunderLAN support"
-	depends on NET_PCI && (PCI || EISA)
-	---help---
-	  If you have a PCI Ethernet network card based on the ThunderLAN chip
-	  which is supported by this driver, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Devices currently supported by this driver are Compaq Netelligent,
-	  Compaq NetFlex and Olicom cards.  Please read the file
-	  <file:Documentation/networking/tlan.txt> for more details.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called tlan.
-
-	  Please email feedback to <torben.mathiasen@compaq.com>.
-
-config KS8842
-	tristate "Micrel KSZ8841/42 with generic bus interface"
-	depends on HAS_IOMEM && DMA_ENGINE
-	help
-	  This platform driver is for KSZ8841(1-port) / KS8842(2-port)
-	  ethernet switch chip (managed, VLAN, QoS) from Micrel or
-	  Timberdale(FPGA).
-
-config KS8851
-	tristate "Micrel KS8851 SPI"
-	depends on SPI
-	select MII
-	select CRC32
-	help
-	  SPI driver for Micrel KS8851 SPI attached network chip.
-
-config KS8851_MLL
-	tristate "Micrel KS8851 MLL"
-	depends on HAS_IOMEM
-	select MII
-	help
-	  This platform driver is for Micrel KS8851 Address/data bus
-	  multiplexed network chip.
-
-config VIA_RHINE
-	tristate "VIA Rhine support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
-	  Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
-	  Ethernet functions can also be found integrated on South Bridges
-	  (e.g. VT8235).
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called via-rhine.
-
-config VIA_RHINE_MMIO
-	bool "Use MMIO instead of PIO"
-	depends on VIA_RHINE
-	help
-	  This instructs the driver to use PCI shared memory (MMIO) instead of
-	  programmed I/O ports (PIO). Enabling this gives an improvement in
-	  processing time in parts of the driver.
-
-	  If unsure, say Y.
-
-config SC92031
-	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
-	  have one of these, say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sc92031.  This is recommended.
-
-config CPMAC
-	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-	depends on NET_ETHERNET && EXPERIMENTAL && AR7
-	select PHYLIB
-	help
-	  TI AR7 CPMAC Ethernet support
-
-config NET_POCKET
-	bool "Pocket and portable adapters"
-	depends on PARPORT
-	---help---
-	  Cute little network (Ethernet) devices which attach to the parallel
-	  port ("pocket adapters"), commonly used with laptops. If you have
-	  one of those, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  If you want to plug a network (or some other) card into the PCMCIA
-	  (or PC-card) slot of your laptop instead (PCMCIA is the standard for
-	  credit card size extension cards used by all modern laptops), you
-	  need the pcmcia-cs package (location contained in the file
-	  <file:Documentation/Changes>) and you can say N here.
-
-	  Laptop users should read the Linux Laptop home page at
-	  <http://www.linux-on-laptops.com/> or
-	  Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about this class of network devices. If you say Y, you
-	  will be asked for your specific device in the following questions.
-
-config ATP
-	tristate "AT-LAN-TEC/RealTek pocket adapter support"
-	depends on NET_POCKET && PARPORT && X86
-	select CRC32
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>, if you
-	  want to use this.  If you intend to use this driver, you should have
-	  said N to the "Parallel printer support", because the two drivers
-	  don't like each other.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called atp.
-
-config DE600
-	tristate "D-Link DE600 pocket adapter support"
-	depends on NET_POCKET && PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de600.
-
-config DE620
-	tristate "D-Link DE620 pocket adapter support"
-	depends on NET_POCKET && PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de620.
-
-config SGISEEQ
-	tristate "SGI Seeq ethernet controller support"
-	depends on SGI_HAS_SEEQ
-	help
-	  Say Y here if you have an Seeq based Ethernet network card. This is
-	  used in many Silicon Graphics machines.
-
-config DECLANCE
-	tristate "DEC LANCE ethernet controller support"
-	depends on MACH_DECSTATION
-	select CRC32
-	help
-	  This driver is for the series of Ethernet controllers produced by
-	  DEC (now Compaq) based on the AMD Lance chipset, including the
-	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
-
-config FEC
-	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
-		IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC
-	default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM
-	select PHYLIB
-	help
-	  Say Y here if you want to use the built-in 10/100 Fast ethernet
-	  controller on some Motorola ColdFire and Freescale i.MX processors.
-
-config FEC_MPC52xx
-	tristate "MPC52xx FEC driver"
-	depends on PPC_MPC52xx && PPC_BESTCOMM
-	select CRC32
-	select PHYLIB
-	select PPC_BESTCOMM_FEC
-	---help---
-	  This option enables support for the MPC5200's on-chip
-	  Fast Ethernet Controller
-	  If compiled as module, it will be called fec_mpc52xx.
-
-config FEC_MPC52xx_MDIO
-	bool "MPC52xx FEC MDIO bus driver"
-	depends on FEC_MPC52xx
-	default y
-	---help---
-	  The MPC5200's FEC can connect to the Ethernet either with
-	  an external MII PHY chip or 10 Mbps 7-wire interface
-	  (Motorola? industry standard).
-	  If your board uses an external PHY connected to FEC, enable this.
-	  If not sure, enable.
-	  If compiled as module, it will be called fec_mpc52xx_phy.
-
-config NE_H8300
-	tristate "NE2000 compatible support for H8/300"
-	depends on H8300
-	help
-	  Say Y here if you want to use the NE2000 compatible
-	  controller on the Renesas H8/300 processor.
-
-config ATL2
-	tristate "Atheros L2 Fast Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L2 fast ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl2.
-
-config XILINX_EMACLITE
-	tristate "Xilinx 10/100 Ethernet Lite support"
-	depends on PPC32 || MICROBLAZE
-	select PHYLIB
-	help
-	  This driver supports the 10/100 Ethernet Lite from Xilinx.
-
-config BCM63XX_ENET
-	tristate "Broadcom 63xx internal mac support"
-	depends on BCM63XX
-	select MII
-	select PHYLIB
-	help
-	  This driver supports the ethernet MACs in the Broadcom 63xx
-	  MIPS chipset family (BCM63XX).
-
-config FTMAC100
-	tristate "Faraday FTMAC100 10/100 Ethernet support"
-	depends on ARM
-	select MII
-	help
-	  This driver supports the FTMAC100 10/100 Ethernet controller
-	  from Faraday. It is used on Faraday A320, Andes AG101 and some
-	  other ARM/NDS32 SoC's.
-
-config LANTIQ_ETOP
-	tristate "Lantiq SoC ETOP driver"
-	depends on SOC_TYPE_XWAY
-	help
-	  Support for the MII0 inside the Lantiq SoC
-
-
-source "drivers/net/fs_enet/Kconfig"
-
-source "drivers/net/octeon/Kconfig"
-
-endif # NET_ETHERNET
-
-#
-#	Gigabit Ethernet
-#
-
-menuconfig NETDEV_1000
-	bool "Ethernet (1000 Mbit)"
-	depends on !UML
-	default y
-	---help---
-	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
-	  type of Local Area Network (LAN) in universities and companies.
-
-	  Say Y here to get to see options for Gigabit Ethernet drivers.
-	  This option alone does not add any kernel code.
-	  Note that drivers supporting both 100 and 1000 MBit may be listed
-	  under "Ethernet (10 or 100MBit)" instead.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_1000
-
-config ACENIC
-	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
-	depends on PCI
-	---help---
-	  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
-	  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
-	  adapter. The driver allows for using the Jumbo Frame option (9000
-	  bytes/frame) however it requires that your switches can handle this
-	  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
-	  line.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acenic.
-
-config ACENIC_OMIT_TIGON_I
-	bool "Omit support for old Tigon I based AceNICs"
-	depends on ACENIC
-	help
-	  Say Y here if you only have Tigon II based AceNICs and want to leave
-	  out support for the older Tigon I based cards which are no longer
-	  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
-	  version)).  This will reduce the size of the driver object by
-	  app. 100KB.  If you are not sure whether your card is a Tigon I or a
-	  Tigon II, say N here.
-
-	  The safe and default value for this is N.
-
-config DL2K
-	tristate "DL2000/TC902x-based Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	help
-	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
-	  which includes
-	  D-Link DGE-550T Gigabit Ethernet Adapter.
-	  D-Link DL2000-based Gigabit Ethernet Adapter.
-	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dl2k.
-
-config E1000
-	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
-	  adapters.  For more information on how to identify your adapter, go 
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e1000.
-
-config E1000E
-	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
-	depends on PCI && (!SPARC32 || BROKEN)
-	select CRC32
-	---help---
-	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
-	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
-	  use the regular e1000 driver For more information on how to
-	  identify your adapter, go to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e1000e.
-
-config IP1000
-	tristate "IP1000 Gigabit Ethernet support"
-	depends on PCI && EXPERIMENTAL
-	select MII
-	---help---
-	  This driver supports IP1000 gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ipg.  This is recommended.
-
-config IGB
-	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
-	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called igb.
-
-config IGB_DCA
-	bool "Direct Cache Access (DCA) Support"
-	default y
-	depends on IGB && DCA && !(IGB=y && DCA=m)
-	---help---
-	  Say Y here if you want to use Direct Cache Access (DCA) in the
-	  driver.  DCA is a method for warming the CPU cache before data
-	  is used, with the intent of lessening the impact of cache misses.
-
-config IGBVF
-	tristate "Intel(R) 82576 Virtual Function Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) 82576 virtual functions.  For more
-	  information on how to identify your adapter, go to the Adapter &
-	  Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called igbvf.
-
-source "drivers/net/ixp2000/Kconfig"
-
-config NS83820
-	tristate "National Semiconductor DP83820 support"
-	depends on PCI
-	help
-	  This is a driver for the National Semiconductor DP83820 series
-	  of gigabit ethernet MACs.  Cards using this chipset include
-	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
-	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
-	  zero copy.
-
-config HAMACHI
-	tristate "Packet Engines Hamachi GNIC-II support"
-	depends on PCI
-	select MII
-	help
-	  If you have a Gigabit Ethernet card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module will be
-	  called hamachi.
-
-config YELLOWFIN
-	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
-	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
-	  used by the Beowulf Linux cluster project.  See
-	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
-	  information about this driver in particular and Beowulf in general.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called yellowfin.  This is recommended.
-
-config R8169
-	tristate "Realtek 8169 gigabit ethernet support"
-	depends on PCI
-	select FW_LOADER
-	select CRC32
-	select MII
-	---help---
-	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called r8169.  This is recommended.
-
-config SB1250_MAC
-	tristate "SB1250 Gigabit Ethernet support"
-	depends on SIBYTE_SB1xxx_SOC
-	select PHYLIB
-	---help---
-	  This driver supports Gigabit Ethernet interfaces based on the
-	  Broadcom SiByte family of System-On-a-Chip parts.  They include
-	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
-	  and BCM1480 chips.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sb1250-mac.
-
-config SIS190
-	tristate "SiS190/SiS191 gigabit ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	---help---
-	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
-	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
-	  appear in lan on motherboard designs which are based on SiS 965
-	  and SiS 966 south bridge.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sis190.  This is recommended.
-
-config SKGE
-	tristate "Marvell Yukon Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	---help---
-	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-	  and related Gigabit Ethernet adapters. It is a new smaller driver
-	  with better performance and more complete ethtool support.
-
-	  It does not support the link failover and network management 
-	  features that "portable" vendor supplied sk98lin driver does.
-
-	  This driver supports adapters based on the original Yukon chipset:
-	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
-	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
-
-	  It does not support the newer Yukon2 chipset: a separate driver,
-	  sky2, is provided for these adapters.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called skge.  This is recommended.
-
-config SKGE_DEBUG
-	bool "Debugging interface"
-	depends on SKGE && DEBUG_FS
-	help
-	  This option adds the ability to dump driver state for debugging.
-	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
-	  transmit and receive rings.
-
-	  If unsure, say N.
-
-config SKGE_GENESIS
-       bool "Support for older SysKonnect Genesis boards"
-       depends on SKGE
-       help
-         This enables support for the older and uncommon SysKonnect Genesis
-	 chips, which support MII via an external transceiver, instead of
-	 an internal one. Disabling this option will save some memory
-	 by making code smaller. If unsure say Y.
-
-config SKY2
-	tristate "Marvell Yukon 2 support"
-	depends on PCI
-	select CRC32
-	---help---
-	  This driver supports Gigabit Ethernet adapters based on the
-	  Marvell Yukon 2 chipset:
-	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
-	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
-
-	  There is companion driver for the older Marvell Yukon and
-	  SysKonnect Genesis based adapters: skge.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sky2.  This is recommended.
-
-config SKY2_DEBUG
-	bool "Debugging interface"
-	depends on SKY2 && DEBUG_FS
-	help
-	  This option adds the ability to dump driver state for debugging.
-	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
-	  transmit and receive rings.
-
-	  If unsure, say N.
-
-config VIA_VELOCITY
-	tristate "VIA Velocity support"
-	depends on PCI
-	select CRC32
-	select CRC_CCITT
-	select MII
-	help
-	  If you have a VIA "Velocity" based network card say Y here.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called via-velocity.
-
-config TIGON3
-	tristate "Broadcom Tigon3 support"
-	depends on PCI
-	select PHYLIB
-	help
-	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called tg3.  This is recommended.
-
-config BNX2
-	tristate "Broadcom NetXtremeII support"
-	depends on PCI
-	select CRC32
-	select FW_LOADER
-	help
-	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called bnx2.  This is recommended.
-
-config CNIC
-	tristate "Broadcom CNIC support"
-	depends on PCI
-	select BNX2
-	select UIO
-	help
-	  This driver supports offload features of Broadcom NetXtremeII
-	  gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called cnic.  This is recommended.
-
-config SPIDER_NET
-	tristate "Spider Gigabit Ethernet driver"
-	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
-	select FW_LOADER
-	help
-	  This driver supports the Gigabit Ethernet chips present on the
-	  Cell Processor-Based Blades from IBM.
-
-config TSI108_ETH
-	tristate "Tundra TSI108 gigabit Ethernet support"
-	depends on TSI108_BRIDGE
-	help
-	  This driver supports Tundra TSI108 gigabit Ethernet ports.
-	  To compile this driver as a module, choose M here: the module
-	  will be called tsi108_eth.
-
-config GELIC_NET
-	tristate "PS3 Gigabit Ethernet driver"
-	depends on PPC_PS3
-	select PS3_SYS_MANAGER
-	help
-	  This driver supports the network device on the PS3 game
-	  console.  This driver has built-in support for Ethernet.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ps3_gelic.
-
-config GELIC_WIRELESS
-	bool "PS3 Wireless support"
-	depends on WLAN
-	depends on GELIC_NET
-	select WIRELESS_EXT
-	help
-	  This option adds the support for the wireless feature of PS3.
-	  If you have the wireless-less model of PS3 or have no plan to
-	  use wireless feature, disabling this option saves memory.  As
-	  the driver automatically distinguishes the models, you can
-	  safely enable this option even if you have a wireless-less model.
-
-config FSL_PQ_MDIO
-	tristate "Freescale PQ MDIO"
-	depends on FSL_SOC
-	select PHYLIB
-	help
-	  This driver supports the MDIO bus used by the gianfar and UCC drivers.
-
-config GIANFAR
-	tristate "Gianfar Ethernet"
-	depends on FSL_SOC
-	select FSL_PQ_MDIO
-	select PHYLIB
-	select CRC32
-	help
-	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
-	  and MPC86xx family of chips, and the FEC on the 8540.
-
-config UCC_GETH
-	tristate "Freescale QE Gigabit Ethernet"
-	depends on QUICC_ENGINE
-	select FSL_PQ_MDIO
-	select PHYLIB
-	help
-	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
-	  which is available on some Freescale SOCs.
-
-config UGETH_TX_ON_DEMAND
-	bool "Transmit on Demand support"
-	depends on UCC_GETH
-
-config MV643XX_ETH
-	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
-	select INET_LRO
-	select PHYLIB
-	help
-	  This driver supports the gigabit ethernet MACs in the
-	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
-	  in the Marvell Orion ARM SoC family.
-
-	  Some boards that use the Discovery chipset are the Momenco
-	  Ocelot C and Jaguar ATX and Pegasos II.
-
-config XILINX_LL_TEMAC
-	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
-	depends on PPC || MICROBLAZE
-	select PHYLIB
-	help
-	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
-	  core used in Xilinx Spartan and Virtex FPGAs
-
-config QLA3XXX
-	tristate "QLogic QLA3XXX Network Driver Support"
-	depends on PCI
-	help
-	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called qla3xxx.
-
-config ATL1
-	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros/Attansic L1 gigabit ethernet
-	  adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1.
-
-config ATL1E
-	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L1E gigabit ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1e.
-
-config ATL1C
-	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L1C gigabit ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1c.
-
-config JME
-	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	---help---
-	  This driver supports the PCI-Express gigabit ethernet adapters
-	  based on JMicron JMC250 chipset.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called jme.
-
-config S6GMAC
-	tristate "S6105 GMAC ethernet support"
-	depends on XTENSA_VARIANT_S6000
-	select PHYLIB
-	help
-	  This driver supports the on chip ethernet device on the
-	  S6105 xtensa processor.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called s6gmac.
-
-source "drivers/net/stmmac/Kconfig"
-
-config PCH_GBE
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
-	depends on PCI
-	select MII
-	---help---
-	  This is a gigabit ethernet driver for EG20T PCH.
-	  EG20T PCH is the platform controller hub that is used in Intel's
-	  general embedded platform.
-	  EG20T PCH has Gigabit Ethernet interface.
-	  Using this interface, it is able to access system devices connected
-	  to Gigabit Ethernet.
-	  This driver enables Gigabit Ethernet function.
-
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7223.
-	  ML7223 IOH is for MP(Media Phone) use.
-	  ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7223 is completely compatible for Intel EG20T PCH.
-
-config FTGMAC100
-	tristate "Faraday FTGMAC100 Gigabit Ethernet support"
-	depends on ARM
-	select PHYLIB
-	help
-	  This driver supports the FTGMAC100 Gigabit Ethernet controller
-	  from Faraday. It is used on Faraday A369, Andes AG102 and some
-	  other ARM/NDS32 SoC's.
-
-endif # NETDEV_1000
-
-#
-#	10 Gigabit Ethernet
-#
-
-menuconfig NETDEV_10000
-	bool "Ethernet (10000 Mbit)"
-	depends on !UML
-	default y
-	---help---
-	  Say Y here to get to see options for 10 Gigabit Ethernet drivers.
-	  This option alone does not add any kernel code.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_10000
-
-config MDIO
-	tristate
-
-config CHELSIO_T1
-	tristate "Chelsio 10Gb Ethernet support"
-	depends on PCI
-	select CRC32
-	select MDIO
-	help
-	  This driver supports Chelsio gigabit and 10-gigabit
-	  Ethernet cards. More information about adapter features and
-	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
-
-	  For general information about Chelsio and our products, visit
-	  our website at <http://www.chelsio.com>.
-
-	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.html>.
-
-	  Please send feedback to <linux-bugs@chelsio.com>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called cxgb.
-
-config CHELSIO_T1_1G
-	bool "Chelsio gigabit Ethernet support"
-	depends on CHELSIO_T1
-	help
-	  Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
-	  are using only 10G cards say 'N' here.
-
-config CHELSIO_T3
-	tristate "Chelsio Communications T3 10Gb Ethernet support"
-	depends on PCI && INET
-	select FW_LOADER
-	select MDIO
-	help
-	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
-	  adapters.
-
-	  For general information about Chelsio and our products, visit
-	  our website at <http://www.chelsio.com>.
-
-	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.html>.
-
-	  Please send feedback to <linux-bugs@chelsio.com>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called cxgb3.
-
-config CHELSIO_T4
-	tristate "Chelsio Communications T4 Ethernet support"
-	depends on PCI
-	select FW_LOADER
-	select MDIO
-	help
-	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
-	  adapters.
-
-	  For general information about Chelsio and our products, visit
-	  our website at <http://www.chelsio.com>.
-
-	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.html>.
-
-	  Please send feedback to <linux-bugs@chelsio.com>.
-
-	  To compile this driver as a module choose M here; the module
-	  will be called cxgb4.
-
-config CHELSIO_T4VF
-	tristate "Chelsio Communications T4 Virtual Function Ethernet support"
-	depends on PCI
-	help
-	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
-	  adapters with PCI-E SR-IOV Virtual Functions.
-
-	  For general information about Chelsio and our products, visit
-	  our website at <http://www.chelsio.com>.
-
-	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.html>.
-
-	  Please send feedback to <linux-bugs@chelsio.com>.
-
-	  To compile this driver as a module choose M here; the module
-	  will be called cxgb4vf.
-
-config EHEA
-	tristate "eHEA Ethernet support"
-	depends on IBMEBUS && INET && SPARSEMEM
-	select INET_LRO
-	---help---
-	  This driver supports the IBM pSeries eHEA ethernet adapter.
-
-	  To compile the driver as a module, choose M here. The module
-	  will be called ehea.
-
-config ENIC
-	tristate "Cisco VIC Ethernet NIC Support"
-	depends on PCI && INET
-	help
-	  This enables the support for the Cisco VIC Ethernet card.
-
-config IXGBE
-	tristate "Intel(R) 10GbE PCI Express adapters support"
-	depends on PCI && INET
-	select MDIO
-	---help---
-	  This driver supports Intel(R) 10GbE PCI Express family of
-	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ixgbe.
-
-config IXGBE_DCA
-	bool "Direct Cache Access (DCA) Support"
-	default y
-	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
-	---help---
-	  Say Y here if you want to use Direct Cache Access (DCA) in the
-	  driver.  DCA is a method for warming the CPU cache before data
-	  is used, with the intent of lessening the impact of cache misses.
-
-config IXGBE_DCB
-	bool "Data Center Bridging (DCB) Support"
-	default n
-	depends on IXGBE && DCB
-	---help---
-	  Say Y here if you want to use Data Center Bridging (DCB) in the
-	  driver.
-
-	  If unsure, say N.
-
-config IXGBEVF
-	tristate "Intel(R) 82599 Virtual Function Ethernet support"
-	depends on PCI_MSI
-	---help---
-	  This driver supports Intel(R) 82599 virtual functions.  For more
-	  information on how to identify your adapter, go to the Adapter &
-	  Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/sb/CS-008441.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/ixgbevf.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ixgbevf.  MSI-X interrupt support is required
-	  for this driver to work correctly.
-
-config IXGB
-	tristate "Intel(R) PRO/10GbE support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) PRO/10GbE family of adapters for
-	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
-	  instead. For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/ixgb.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ixgb.
-
-config S2IO
-	tristate "Exar Xframe 10Gb Ethernet Adapter"
-	depends on PCI
-	---help---
-	  This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/s2io.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called s2io.
-
-config VXGE
-	tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
-	depends on PCI && INET
-	---help---
-	  This driver supports Exar Corp's X3100 Series 10 GbE PCIe
-	  I/O Virtualized Server Adapter.
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/vxge.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called vxge.
-
-config VXGE_DEBUG_TRACE_ALL
-	bool "Enabling All Debug trace statments in driver"
-	default n
-	depends on VXGE
-	---help---
-	  Say Y here if you want to enabling all the debug trace statements in
-	  the vxge driver. By default only few debug trace statements are
-	  enabled.
-
-config MYRI10GE
-	tristate "Myricom Myri-10G Ethernet support"
-	depends on PCI && INET
-	select FW_LOADER
-	select CRC32
-	select INET_LRO
-	---help---
-	  This driver supports Myricom Myri-10G Dual Protocol interface in
-	  Ethernet mode. If the eeprom on your board is not recent enough,
-	  you will need a newer firmware image.
-	  You may get this image or more information, at:
-
-	  <http://www.myri.com/scs/download-Myri10GE.html>
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called myri10ge.
-
-config MYRI10GE_DCA
-	bool "Direct Cache Access (DCA) Support"
-	default y
-	depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
-	---help---
-	  Say Y here if you want to use Direct Cache Access (DCA) in the
-	  driver.  DCA is a method for warming the CPU cache before data
-	  is used, with the intent of lessening the impact of cache misses.
-
-config NETXEN_NIC
-	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
-	depends on PCI
-	select FW_LOADER
-	help
-	  This enables the support for NetXen's Gigabit Ethernet card.
-
-config NIU
-	tristate "Sun Neptune 10Gbit Ethernet support"
-	depends on PCI
-	select CRC32
-	help
-	  This enables support for cards based upon Sun's
-	  Neptune chipset.
-
-config PASEMI_MAC
-	tristate "PA Semi 1/10Gbit MAC"
-	depends on PPC_PASEMI && PCI && INET
-	select PHYLIB
-	select INET_LRO
-	help
-	  This driver supports the on-chip 1/10Gbit Ethernet controller on
-	  PA Semi's PWRficient line of chips.
-
-config MLX4_EN
-	tristate "Mellanox Technologies 10Gbit Ethernet support"
-	depends on PCI && INET
-	select MLX4_CORE
-	select INET_LRO
-	help
-	  This driver supports Mellanox Technologies ConnectX Ethernet
-	  devices.
-
-config MLX4_CORE
-	tristate
-	depends on PCI
-	default n
-
-config MLX4_DEBUG
-	bool "Verbose debugging output" if (MLX4_CORE && EXPERT)
-	depends on MLX4_CORE
-	default y
-	---help---
-	  This option causes debugging code to be compiled into the
-	  mlx4_core driver.  The output can be turned on via the
-	  debug_level module parameter (which can also be set after
-	  the driver is loaded through sysfs).
-
-config TEHUTI
-	tristate "Tehuti Networks 10G Ethernet"
-	depends on PCI
-	help
-	  Tehuti Networks 10G Ethernet NIC
-
-config BNX2X
-	tristate "Broadcom NetXtremeII 10Gb support"
-	depends on PCI
-	select FW_LOADER
-	select ZLIB_INFLATE
-	select LIBCRC32C
-	select MDIO
-	help
-	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
-	  To compile this driver as a module, choose M here: the module
-	  will be called bnx2x.  This is recommended.
-
-config QLCNIC
-	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
-	depends on PCI
-	select FW_LOADER
-	help
-	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
-	  devices.
-
-config QLGE
-	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
-	depends on PCI
-	help
-	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called qlge.
-
-config BNA
-	tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
-	depends on PCI
-	---help---
-	  This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
-	  cards.
-	  To compile this driver as a module, choose M here: the module
-	  will be called bna.
-
-	  For general information and support, go to the Brocade support
-	  website at:
-
-	  <http://support.brocade.com>
-
-source "drivers/net/sfc/Kconfig"
-
-source "drivers/net/benet/Kconfig"
-
-endif # NETDEV_10000
+source "drivers/s390/net/Kconfig"
 
 source "drivers/net/tokenring/Kconfig"
 
+source "drivers/net/usb/Kconfig"
+
 source "drivers/net/wireless/Kconfig"
 
 source "drivers/net/wimax/Kconfig"
 
-source "drivers/net/usb/Kconfig"
-
-source "drivers/net/pcmcia/Kconfig"
-
 source "drivers/net/wan/Kconfig"
 
-source "drivers/atm/Kconfig"
-
-source "drivers/ieee802154/Kconfig"
-
-source "drivers/s390/net/Kconfig"
-
-source "drivers/net/caif/Kconfig"
-
-config TILE_NET
-	tristate "Tilera GBE/XGBE network driver support"
-	depends on TILE
-	default y
-	select CRC32
-	help
-	  This is a standard Linux network device driver for the
-	  on-chip Tilera Gigabit Ethernet and XAUI interfaces.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called tile_net.
-
 config XEN_NETDEV_FRONTEND
 	tristate "Xen network device frontend driver"
 	depends on XEN
@@ -3001,448 +328,6 @@ config XEN_NETDEV_BACKEND
 	  compile this driver as a module, chose M here: the module
 	  will be called xen-netback.
 
-config ISERIES_VETH
-	tristate "iSeries Virtual Ethernet driver support"
-	depends on PPC_ISERIES
-
-config RIONET
-	tristate "RapidIO Ethernet over messaging driver support"
-	depends on RAPIDIO
-
-config RIONET_TX_SIZE
-	int "Number of outbound queue entries"
-	depends on RIONET
-	default "128"
-
-config RIONET_RX_SIZE
-	int "Number of inbound queue entries"
-	depends on RIONET
-	default "128"
-
-config FDDI
-	tristate "FDDI driver support"
-	depends on (PCI || EISA || TC)
-	help
-	  Fiber Distributed Data Interface is a high speed local area network
-	  design; essentially a replacement for high speed Ethernet. FDDI can
-	  run over copper or fiber. If you are connected to such a network and
-	  want a driver for the FDDI card in your computer, say Y here (and
-	  then also Y to the driver for your FDDI card, below). Most people
-	  will say N.
-
-config DEFXX
-	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
-	depends on FDDI && (PCI || EISA || TC)
-	---help---
-	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
-	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
-	  to a local FDDI network.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called defxx.  If unsure, say N.
-
-config DEFXX_MMIO
-	bool
-	prompt "Use MMIO instead of PIO" if PCI || EISA
-	depends on DEFXX
-	default n if PCI || EISA
-	default y
-	---help---
-	  This instructs the driver to use EISA or PCI memory-mapped I/O
-	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
-	  Enabling this gives an improvement in processing time in parts
-	  of the driver, but it may cause problems with EISA (DEFEA)
-	  adapters.  TURBOchannel does not have the concept of I/O ports,
-	  so MMIO is always used for these (DEFTA) adapters.
-
-	  If unsure, say N.
-
-config SKFP
-	tristate "SysKonnect FDDI PCI support"
-	depends on FDDI && PCI
-	select BITREVERSE
-	---help---
-	  Say Y here if you have a SysKonnect FDDI PCI adapter.
-	  The following adapters are supported by this driver:
-	  - SK-5521 (SK-NET FDDI-UP)
-	  - SK-5522 (SK-NET FDDI-UP DAS)
-	  - SK-5541 (SK-NET FDDI-FP)
-	  - SK-5543 (SK-NET FDDI-LP)
-	  - SK-5544 (SK-NET FDDI-LP DAS)
-	  - SK-5821 (SK-NET FDDI-UP64)
-	  - SK-5822 (SK-NET FDDI-UP64 DAS)
-	  - SK-5841 (SK-NET FDDI-FP64)
-	  - SK-5843 (SK-NET FDDI-LP64)
-	  - SK-5844 (SK-NET FDDI-LP64 DAS)
-	  - Netelligent 100 FDDI DAS Fibre SC
-	  - Netelligent 100 FDDI SAS Fibre SC
-	  - Netelligent 100 FDDI DAS UTP
-	  - Netelligent 100 FDDI SAS UTP
-	  - Netelligent 100 FDDI SAS Fibre MIC
-
-	  Read <file:Documentation/networking/skfp.txt> for information about
-	  the driver.
-
-	  Questions concerning this driver can be addressed to:
-	  <linux@syskonnect.de>
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called skfp.  This is recommended.
-
-config HIPPI
-	bool "HIPPI driver support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && INET && PCI
-	help
-	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
-	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
-	  can run over copper (25m) or fiber (300m on multi-mode or 10km on
-	  single-mode). HIPPI networks are commonly used for clusters and to
-	  connect to super computers. If you are connected to a HIPPI network
-	  and have a HIPPI network card in your computer that you want to use
-	  under Linux, say Y here (you must also remember to enable the driver
-	  for your HIPPI card below). Most people will say N here.
-
-config ROADRUNNER
-	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
-	depends on HIPPI && PCI
-	help
-	  Say Y here if this is your PCI HIPPI network card.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called rrunner.  If unsure, say N.
-
-config ROADRUNNER_LARGE_RINGS
-	bool "Use large TX/RX rings (EXPERIMENTAL)"
-	depends on ROADRUNNER
-	help
-	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
-	  of additional memory to allow for fastest operation, both for
-	  transmitting and receiving. This memory cannot be used by any other
-	  kernel code or by user space programs. Say Y here only if you have
-	  the memory.
-
-config PLIP
-	tristate "PLIP (parallel port) support"
-	depends on PARPORT
-	---help---
-	  PLIP (Parallel Line Internet Protocol) is used to create a
-	  reasonably fast mini network consisting of two (or, rarely, more)
-	  local machines.  A PLIP link from a Linux box is a popular means to
-	  install a Linux distribution on a machine which doesn't have a
-	  CD-ROM drive (a minimal system has to be transferred with floppies
-	  first). The kernels on both machines need to have this PLIP option
-	  enabled for this to work.
-
-	  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
-	  ports (the connectors at the computers with 25 holes) are connected
-	  with "null printer" or "Turbo Laplink" cables which can transmit 4
-	  bits at a time (mode 0) or with special PLIP cables, to be used on
-	  bidirectional parallel ports only, which can transmit 8 bits at a
-	  time (mode 1); you can find the wiring of these cables in
-	  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
-	  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
-	  and has some PLIP software installed, e.g. the Crynwr PLIP packet
-	  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
-	  and winsock or NCSA's telnet.
-
-	  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
-	  as the NET-3-HOWTO, both available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
-	  protocol has been changed and this PLIP driver won't work together
-	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
-	  your kernel by about 8 KB.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called plip. If unsure, say Y or M, in case you buy
-	  a laptop later.
-
-config PPP
-	tristate "PPP (point-to-point protocol) support"
-	select SLHC
-	---help---
-	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
-	  the same purpose: sending Internet traffic over telephone (and other
-	  serial) lines.  Ask your access provider if they support it, because
-	  otherwise you can't use it; most Internet access providers these
-	  days support PPP rather than SLIP.
-
-	  To use PPP, you need an additional program called pppd as described
-	  in the PPP-HOWTO, available at
-	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
-	  the version of pppd recommended in <file:Documentation/Changes>.
-	  The PPP option enlarges your kernel by about 16 KB.
-
-	  There are actually two versions of PPP: the traditional PPP for
-	  asynchronous lines, such as regular analog phone lines, and
-	  synchronous PPP which can be used over digital ISDN lines for
-	  example.  If you want to use PPP over phone lines or other
-	  asynchronous serial lines, you need to say Y (or M) here and also to
-	  the next option, "PPP support for async serial ports".  For PPP over
-	  synchronous lines, you should say Y (or M) here and to "Support
-	  synchronous PPP", below.
-
-	  If you said Y to "Version information on all symbols" above, then
-	  you cannot compile the PPP driver into the kernel; you can then only
-	  compile it as a module. To compile this driver as a module, choose M
-	  here. The module will be called ppp_generic.
-
-config PPP_MULTILINK
-	bool "PPP multilink support (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
-	help
-	  PPP multilink is a protocol (defined in RFC 1990) which allows you
-	  to combine several (logical or physical) lines into one logical PPP
-	  connection, so that you can utilize your full bandwidth.
-
-	  This has to be supported at the other end as well and you need a
-	  version of the pppd daemon which understands the multilink protocol.
-
-	  If unsure, say N.
-
-config PPP_FILTER
-	bool "PPP filtering"
-	depends on PPP
-	help
-	  Say Y here if you want to be able to filter the packets passing over
-	  PPP interfaces.  This allows you to control which packets count as
-	  activity (i.e. which packets will reset the idle timer or bring up
-	  a demand-dialed link) and which packets are to be dropped entirely.
-	  You need to say Y here if you wish to use the pass-filter and
-	  active-filter options to pppd.
-
-	  If unsure, say N.
-
-config PPP_ASYNC
-	tristate "PPP support for async serial ports"
-	depends on PPP
-	select CRC_CCITT
-	---help---
-	  Say Y (or M) here if you want to be able to use PPP over standard
-	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
-	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
-	  need this option.
-
-	  To compile this driver as a module, choose M here.
-
-	  If unsure, say Y.
-
-config PPP_SYNC_TTY
-	tristate "PPP support for sync tty ports"
-	depends on PPP
-	help
-	  Say Y (or M) here if you want to be able to use PPP over synchronous
-	  (HDLC) tty devices, such as the SyncLink adapter. These devices
-	  are often used for high-speed leased lines like T1/E1.
-
-	  To compile this driver as a module, choose M here.
-
-config PPP_DEFLATE
-	tristate "PPP Deflate compression"
-	depends on PPP
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	---help---
-	  Support for the Deflate compression method for PPP, which uses the
-	  Deflate algorithm (the same algorithm that gzip uses) to compress
-	  each PPP packet before it is sent over the wire.  The machine at the
-	  other end of the PPP link (usually your ISP) has to support the
-	  Deflate compression method as well for this to be useful.  Even if
-	  they don't support it, it is safe to say Y here.
-
-	  To compile this driver as a module, choose M here.
-
-config PPP_BSDCOMP
-	tristate "PPP BSD-Compress compression"
-	depends on PPP
-	---help---
-	  Support for the BSD-Compress compression method for PPP, which uses
-	  the LZW compression method to compress each PPP packet before it is
-	  sent over the wire. The machine at the other end of the PPP link
-	  (usually your ISP) has to support the BSD-Compress compression
-	  method as well for this to be useful. Even if they don't support it,
-	  it is safe to say Y here.
-
-	  The PPP Deflate compression method ("PPP Deflate compression",
-	  above) is preferable to BSD-Compress, because it compresses better
-	  and is patent-free.
-
-	  Note that the BSD compression code will always be compiled as a
-	  module; it is called bsd_comp and will show up in the directory
-	  modules once you have said "make modules". If unsure, say N.
-
-config PPP_MPPE
-	tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
-	select CRYPTO
-	select CRYPTO_SHA1
-	select CRYPTO_ARC4
-	select CRYPTO_ECB
-	---help---
-	  Support for the MPPE Encryption protocol, as employed by the
-	  Microsoft Point-to-Point Tunneling Protocol.
-
-	  See http://pptpclient.sourceforge.net/ for information on
-	  configuring PPTP clients and servers to utilize this method.
-
-config PPPOE
-	tristate "PPP over Ethernet (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP
-	help
-	  Support for PPP over Ethernet.
-
-	  This driver requires the latest version of pppd from the CVS
-	  repository at cvs.samba.org.  Alternatively, see the 
-	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
-	  which contains instruction on how to use this driver (under 
-	  the heading "Kernel mode PPPoE").
-
-config PPTP
-	tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
-	help
-	  Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
-
-	  This driver requires pppd plugin to work in client mode or
-	  modified pptpd (poptop) to work in server mode.
-	  See http://accel-pptp.sourceforge.net/ for information how to
-	  utilize this module.
-
-config PPPOATM
-	tristate "PPP over ATM"
-	depends on ATM && PPP
-	help
-	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
-	  This implementation does not yet comply with section 8 of RFC2364,
-	  which can lead to bad results if the ATM peer loses state and
-	  changes its encapsulation unilaterally.
-
-config PPPOL2TP
-	tristate "PPP over L2TP (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && L2TP && PPP
-	help
-	  Support for PPP-over-L2TP socket family. L2TP is a protocol
-	  used by ISPs and enterprises to tunnel PPP traffic over UDP
-	  tunnels. L2TP is replacing PPTP for VPN uses.
-
-config SLIP
-	tristate "SLIP (serial line) support"
-	---help---
-	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
-	  connect to your Internet service provider or to connect to some
-	  other local Unix box or if you want to configure your Linux box as a
-	  Slip/CSlip server for other people to dial in. SLIP (Serial Line
-	  Internet Protocol) is a protocol used to send Internet traffic over
-	  serial connections such as telephone lines or null modem cables;
-	  nowadays, the protocol PPP is more commonly used for this same
-	  purpose.
-
-	  Normally, your access provider has to support SLIP in order for you
-	  to be able to use it, but there is now a SLIP emulator called SLiRP
-	  around (available from
-	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-	  allows you to use SLIP over a regular dial up shell connection. If
-	  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
-	  NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, explains how to
-	  configure SLIP. Note that you don't need this option if you just
-	  want to run term (term is a program which gives you almost full
-	  Internet connectivity if you have a regular dial up shell account on
-	  some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
-	  support will enlarge your kernel by about 4 KB. If unsure, say N.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called slip.
-
-config SLIP_COMPRESSED
-	bool "CSLIP compressed headers"
-	depends on SLIP
-	select SLHC
-	---help---
-	  This protocol is faster than SLIP because it uses compression on the
-	  TCP/IP headers (not on the data itself), but it has to be supported
-	  on both ends. Ask your access provider if you are not sure and
-	  answer Y, just in case. You will still be able to use plain SLIP. If
-	  you plan to use SLiRP, the SLIP emulator (available from
-	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-	  allows you to use SLIP over a regular dial up shell connection, you
-	  definitely want to say Y here. The NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, explains how to configure
-	  CSLIP. This won't enlarge your kernel.
-
-config SLHC
-	tristate
-	help
-	  This option enables Van Jacobsen serial line header compression
-	  routines.
-
-config SLIP_SMART
-	bool "Keepalive and linefill"
-	depends on SLIP
-	help
-	  Adds additional capabilities to the SLIP driver to support the
-	  RELCOM line fill and keepalive monitoring. Ideal on poor quality
-	  analogue lines.
-
-config SLIP_MODE_SLIP6
-	bool "Six bit SLIP encapsulation"
-	depends on SLIP
-	help
-	  Just occasionally you may need to run IP over hostile serial
-	  networks that don't pass all control characters or are only seven
-	  bit. Saying Y here adds an extra mode you can use with SLIP:
-	  "slip6". In this mode, SLIP will only send normal ASCII symbols over
-	  the serial device. Naturally, this has to be supported at the other
-	  end of the link as well. It's good enough, for example, to run IP
-	  over the async ports of a Camtec JNT Pad. If unsure, say N.
-
-config NET_FC
-	bool "Fibre Channel driver support"
-	depends on SCSI && PCI
-	help
-	  Fibre Channel is a high speed serial protocol mainly used to connect
-	  large storage devices to the computer; it is compatible with and
-	  intended to replace SCSI.
-
-	  If you intend to use Fibre Channel, you need to have a Fibre channel
-	  adaptor card in your computer; say Y here and to the driver for your
-	  adaptor below. You also should have said Y to "SCSI support" and
-	  "SCSI generic support".
-
-config NETCONSOLE
-	tristate "Network console logging support"
-	---help---
-	If you want to log kernel messages over the network, enable this.
-	See <file:Documentation/networking/netconsole.txt> for details.
-
-config NETCONSOLE_DYNAMIC
-	bool "Dynamic reconfiguration of logging targets"
-	depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
-			!(NETCONSOLE=y && CONFIGFS_FS=m)
-	help
-	  This option enables the ability to dynamically reconfigure target
-	  parameters (interface, IP addresses, port numbers, MAC addresses)
-	  at runtime through a userspace interface exported using configfs.
-	  See <file:Documentation/networking/netconsole.txt> for details.
-
-config NETPOLL
-	def_bool NETCONSOLE
-
-config NETPOLL_TRAP
-	bool "Netpoll traffic trapping"
-	default n
-	depends on NETPOLL
-
-config NET_POLL_CONTROLLER
-	def_bool NETPOLL
-
-config VIRTIO_NET
-	tristate "Virtio network driver (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIRTIO
-	---help---
-	  This is the virtual network driver for virtio.  It can be used with
-	  lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
-
 config VMXNET3
 	tristate "VMware VMXNET3 ethernet driver"
 	depends on PCI && INET
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index e1eca2ab505e..1f52e73547b0 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,278 +1,62 @@
 #
-# Makefile for the Linux network (ethercard) device drivers.
+# Makefile for the Linux network device drivers.
 #
 
-obj-$(CONFIG_MII) += mii.o
-obj-$(CONFIG_MDIO) += mdio.o
-obj-$(CONFIG_PHYLIB) += phy/
-
-obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
-obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
-obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
-
-obj-$(CONFIG_E1000) += e1000/
-obj-$(CONFIG_E1000E) += e1000e/
-obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
-obj-$(CONFIG_IGB) += igb/
-obj-$(CONFIG_IGBVF) += igbvf/
-obj-$(CONFIG_IXGBE) += ixgbe/
-obj-$(CONFIG_IXGBEVF) += ixgbevf/
-obj-$(CONFIG_IXGB) += ixgb/
-obj-$(CONFIG_IP1000) += ipg.o
-obj-$(CONFIG_CHELSIO_T1) += chelsio/
-obj-$(CONFIG_CHELSIO_T3) += cxgb3/
-obj-$(CONFIG_CHELSIO_T4) += cxgb4/
-obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
-obj-$(CONFIG_EHEA) += ehea/
-obj-$(CONFIG_CAN) += can/
-obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_ATL1) += atlx/
-obj-$(CONFIG_ATL2) += atlx/
-obj-$(CONFIG_ATL1E) += atl1e/
-obj-$(CONFIG_ATL1C) += atl1c/
-obj-$(CONFIG_GIANFAR) += gianfar_driver.o
-obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
-obj-$(CONFIG_TEHUTI) += tehuti.o
-obj-$(CONFIG_ENIC) += enic/
-obj-$(CONFIG_JME) += jme.o
-obj-$(CONFIG_BE2NET) += benet/
-obj-$(CONFIG_VMXNET3) += vmxnet3/
-obj-$(CONFIG_BNA) += bna/
-
-gianfar_driver-objs := gianfar.o \
-		gianfar_ethtool.o \
-		gianfar_sysfs.o
-
-obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
-ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
-
-obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
-
-#
-# link order important here
 #
-obj-$(CONFIG_PLIP) += plip.o
-
-obj-$(CONFIG_ROADRUNNER) += rrunner.o
-
-obj-$(CONFIG_HAPPYMEAL) += sunhme.o
-obj-$(CONFIG_SUNLANCE) += sunlance.o
-obj-$(CONFIG_SUNQE) += sunqe.o
-obj-$(CONFIG_SUNBMAC) += sunbmac.o
-obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
-obj-$(CONFIG_CASSINI) += cassini.o
-obj-$(CONFIG_SUNVNET) += sunvnet.o
-
-obj-$(CONFIG_MACE) += mace.o
-obj-$(CONFIG_BMAC) += bmac.o
-
-obj-$(CONFIG_VORTEX) += 3c59x.o
-obj-$(CONFIG_TYPHOON) += typhoon.o
-obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-obj-$(CONFIG_PCNET32) += pcnet32.o
-obj-$(CONFIG_E100) += e100.o
-obj-$(CONFIG_TLAN) += tlan.o
-obj-$(CONFIG_EPIC100) += epic100.o
-obj-$(CONFIG_SMSC9420) += smsc9420.o
-obj-$(CONFIG_SIS190) += sis190.o
-obj-$(CONFIG_SIS900) += sis900.o
-obj-$(CONFIG_R6040) += r6040.o
-obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_ACENIC) += acenic.o
-obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
-obj-$(CONFIG_NATSEMI) += natsemi.o
-obj-$(CONFIG_NS83820) += ns83820.o
-obj-$(CONFIG_STNIC) += stnic.o 8390.o
-obj-$(CONFIG_FEALNX) += fealnx.o
-obj-$(CONFIG_TIGON3) += tg3.o
-obj-$(CONFIG_BNX2) += bnx2.o
-obj-$(CONFIG_CNIC) += cnic.o
-obj-$(CONFIG_BNX2X) += bnx2x/
-spidernet-y += spider_net.o spider_net_ethtool.o
-obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
-obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
-gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
-ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
-obj-$(CONFIG_TC35815) += tc35815.o
-obj-$(CONFIG_SKGE) += skge.o
-obj-$(CONFIG_SKY2) += sky2.o
-obj-$(CONFIG_SKFP) += skfp/
-obj-$(CONFIG_KS8842)	+= ks8842.o
-obj-$(CONFIG_KS8851)	+= ks8851.o
-obj-$(CONFIG_KS8851_MLL)	+= ks8851_mll.o
-obj-$(CONFIG_KSZ884X_PCI)	+= ksz884x.o
-obj-$(CONFIG_VIA_RHINE) += via-rhine.o
-obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
-obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
-obj-$(CONFIG_RIONET) += rionet.o
-obj-$(CONFIG_SH_ETH) += sh_eth.o
-obj-$(CONFIG_STMMAC_ETH) += stmmac/
-
+# Networking Core Drivers
 #
-# end link order section
-#
-
-obj-$(CONFIG_SUNDANCE) += sundance.o
-obj-$(CONFIG_HAMACHI) += hamachi.o
-obj-$(CONFIG_NET) += Space.o loopback.o
-obj-$(CONFIG_SEEQ8005) += seeq8005.o
-obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o
-obj-$(CONFIG_APNE) += apne.o 8390.o
-obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
-obj-$(CONFIG_HP100) += hp100.o
-obj-$(CONFIG_SMC9194) += smc9194.o
-obj-$(CONFIG_FEC) += fec.o
-obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
-ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
-	obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
-endif
-obj-$(CONFIG_WD80x3) += wd.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_NE2000) += ne.o 8390p.o
-obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
-obj-$(CONFIG_HPLAN) += hp.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
-obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
-obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
-obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
-obj-$(CONFIG_E2100) += e2100.o 8390.o
-obj-$(CONFIG_ES3210) += es3210.o 8390.o
-obj-$(CONFIG_LNE390) += lne390.o 8390.o
-obj-$(CONFIG_NE3210) += ne3210.o 8390.o
-obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
-obj-$(CONFIG_B44) += b44.o
-obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o
-obj-$(CONFIG_AX88796) += ax88796.o
-obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
-obj-$(CONFIG_FTMAC100) += ftmac100.o
-
-obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
-obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
-ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
-obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
-obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-obj-$(CONFIG_QLA3XXX) += qla3xxx.o
-obj-$(CONFIG_QLCNIC) += qlcnic/
-obj-$(CONFIG_QLGE) += qlge/
-
-obj-$(CONFIG_PPP) += ppp_generic.o
-obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
-obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
-obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
-obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
-obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
-obj-$(CONFIG_PPPOL2TP) += pppox.o
-obj-$(CONFIG_PPTP) += pppox.o pptp.o
-
-obj-$(CONFIG_SLIP) += slip.o
-obj-$(CONFIG_SLHC) += slhc.o
-
-obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
-obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
-
+obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_DUMMY) += dummy.o
+obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
-obj-$(CONFIG_LANCE) += lance.o
-obj-$(CONFIG_SUN3_82586) += sun3_82586.o
-obj-$(CONFIG_SUN3LANCE) += sun3lance.o
-obj-$(CONFIG_DEFXX) += defxx.o
-obj-$(CONFIG_SGISEEQ) += sgiseeq.o
-obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
-obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_EL1) += 3c501.o
-obj-$(CONFIG_EL16) += 3c507.o
-obj-$(CONFIG_ELMC) += 3c523.o
-obj-$(CONFIG_IBMLANA) += ibmlana.o
-obj-$(CONFIG_ELMC_II) += 3c527.o
-obj-$(CONFIG_EL3) += 3c509.o
-obj-$(CONFIG_3C515) += 3c515.o
-obj-$(CONFIG_EEXPRESS) += eexpress.o
-obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
-obj-$(CONFIG_8139CP) += 8139cp.o
-obj-$(CONFIG_8139TOO) += 8139too.o
-obj-$(CONFIG_ZNET) += znet.o
-obj-$(CONFIG_CPMAC) += cpmac.o
-obj-$(CONFIG_DEPCA) += depca.o
-obj-$(CONFIG_EWRK3) += ewrk3.o
-obj-$(CONFIG_ATP) += atp.o
-obj-$(CONFIG_NI5010) += ni5010.o
-obj-$(CONFIG_NI52) += ni52.o
-obj-$(CONFIG_NI65) += ni65.o
-obj-$(CONFIG_ELPLUS) += 3c505.o
-obj-$(CONFIG_AC3200) += ac3200.o 8390.o
-obj-$(CONFIG_APRICOT) += 82596.o
-obj-$(CONFIG_LASI_82596) += lasi_82596.o
-obj-$(CONFIG_SNI_82596) += sni_82596.o
-obj-$(CONFIG_MVME16x_NET) += 82596.o
-obj-$(CONFIG_BVME6000_NET) += 82596.o
-obj-$(CONFIG_SC92031) += sc92031.o
-
-# This is also a 82596 and should probably be merged
-obj-$(CONFIG_LP486E) += lp486e.o
-
-obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ZORRO8390) += zorro8390.o
-obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
-obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
-obj-$(CONFIG_EQUALIZER) += eql.o
-obj-$(CONFIG_KORINA) += korina.o
-obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
-obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
-obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_DECLANCE) += declance.o
-obj-$(CONFIG_ATARILANCE) += atarilance.o
-obj-$(CONFIG_A2065) += a2065.o
-obj-$(CONFIG_HYDRA) += hydra.o
-obj-$(CONFIG_ARIADNE) += ariadne.o
-obj-$(CONFIG_CS89x0) += cs89x0.o
-obj-$(CONFIG_MACSONIC) += macsonic.o
-obj-$(CONFIG_MACMACE) += macmace.o
-obj-$(CONFIG_MAC89x0) += mac89x0.o
+obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
+obj-$(CONFIG_NET) += Space.o loopback.o
+obj-$(CONFIG_NETCONSOLE) += netconsole.o
+obj-$(CONFIG_PHYLIB) += phy/
+obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
-obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DL2K) += dl2k.o
-obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
-obj-$(CONFIG_IBMVETH) += ibmveth.o
-obj-$(CONFIG_S2IO) += s2io.o
-obj-$(CONFIG_VXGE) += vxge/
-obj-$(CONFIG_MYRI10GE) += myri10ge/
-obj-$(CONFIG_SMC91X) += smc91x.o
-obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_SMSC911X) += smsc911x.o
-obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
-obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
-obj-$(CONFIG_DM9000) += dm9000.o
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
-pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
-obj-$(CONFIG_MLX4_CORE) += mlx4/
-obj-$(CONFIG_ENC28J60) += enc28j60.o
-obj-$(CONFIG_ETHOC) += ethoc.o
-obj-$(CONFIG_GRETH) += greth.o
-obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-
-obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
-
-obj-$(CONFIG_DNET) += dnet.o
-obj-$(CONFIG_MACB) += macb.o
-obj-$(CONFIG_S6GMAC) += s6gmac.o
+obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 
-obj-$(CONFIG_ARM) += arm/
+#
+# Networking Drivers
+#
+obj-$(CONFIG_ARCNET) += arcnet/
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+obj-$(CONFIG_CAIF) += caif/
+obj-$(CONFIG_CAN) += can/
+obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+obj-$(CONFIG_ETHERNET) += ethernet/
+obj-$(CONFIG_FDDI) += fddi/
+obj-$(CONFIG_HIPPI) += hippi/
+obj-$(CONFIG_HAMRADIO) += hamradio/
+obj-$(CONFIG_IRDA) += irda/
+obj-$(CONFIG_PLIP) += plip/
+onj-$(CONFIG_PPP) += ppp/
+obj-$(CONFIG_PPP_ASYNC) += ppp/
+obj-$(CONFIG_PPP_BSDCOMP) += ppp/
+obj-$(CONFIG_PPP_DEFLATE) += ppp/
+obj-$(CONFIG_PPP_MPPE) += ppp/
+obj-$(CONFIG_PPP_SYNC_TTY) += ppp/
+obj-$(CONFIG_PPPOE) += ppp/
+obj-$(CONFIG_PPPOL2TP) += ppp/
+obj-$(CONFIG_PPTP) += ppp/
+onj-$(CONFIG_SLIP) += slip/
+obj-$(CONFIG_SLHC) += slip/
+obj-$(CONFIG_NET_SB1000) += sb1000.o
+onj-$(CONFIG_SLIP) += slip/
+obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
-obj-$(CONFIG_ARCNET) += arcnet/
-obj-$(CONFIG_NET_PCMCIA) += pcmcia/
+obj-$(CONFIG_WLAN) += wireless/
+obj-$(CONFIG_WIMAX) += wimax/
+
+obj-$(CONFIG_VMXNET3) += vmxnet3/
+obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
 
 obj-$(CONFIG_USB_CATC)          += usb/
 obj-$(CONFIG_USB_KAWETH)        += usb/
@@ -283,26 +67,3 @@ obj-$(CONFIG_USB_USBNET)        += usb/
 obj-$(CONFIG_USB_ZD1201)        += usb/
 obj-$(CONFIG_USB_IPHETH)        += usb/
 obj-$(CONFIG_USB_CDC_PHONET)   += usb/
-
-obj-$(CONFIG_WLAN) += wireless/
-obj-$(CONFIG_NET_TULIP) += tulip/
-obj-$(CONFIG_HAMRADIO) += hamradio/
-obj-$(CONFIG_IRDA) += irda/
-obj-$(CONFIG_ETRAX_ETHERNET) += cris/
-obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
-
-obj-$(CONFIG_NETCONSOLE) += netconsole.o
-
-obj-$(CONFIG_FS_ENET) += fs_enet/
-
-obj-$(CONFIG_NETXEN_NIC) += netxen/
-obj-$(CONFIG_NIU) += niu.o
-obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
-obj-$(CONFIG_SFC) += sfc/
-
-obj-$(CONFIG_WIMAX) += wimax/
-obj-$(CONFIG_CAIF) += caif/
-
-obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
-obj-$(CONFIG_PCH_GBE) += pch_gbe/
-obj-$(CONFIG_TILE_NET) += tile/
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 748c9f526e71..9abd4eb86dc1 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -264,7 +264,7 @@ static const struct net_device_ops cops_netdev_ops = {
 	.ndo_start_xmit   	= cops_send_packet,
 	.ndo_tx_timeout		= cops_timeout,
         .ndo_do_ioctl           = cops_ioctl,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 };
 
 /*
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 34ffb5422628..6057b30417a2 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1014,7 +1014,7 @@ static int __init ltpc_probe_dma(int base, int dma)
 static const struct net_device_ops ltpc_netdev = {
 	.ndo_start_xmit		= ltpc_xmit,
 	.ndo_do_ioctl		= ltpc_ioctl,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 };
 
 struct net_device * __init ltpc_probe(void)
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 3b2f7f115464..a73d9dc80ff6 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -3,8 +3,8 @@
 #
 
 menuconfig ARCNET
-	depends on NETDEVICES && (ISA || PCI)
-	tristate "ARCnet support"
+	depends on NETDEVICES && (ISA || PCI || PCMCIA)
+	bool "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
 	  (arguably) beautiful poetry in
@@ -123,4 +123,14 @@ config ARCNET_COM20020_PCI
 	tristate "Support for COM20020 on PCI"
 	depends on ARCNET_COM20020 && PCI
 
+config ARCNET_COM20020_CS
+	tristate "COM20020 ARCnet PCMCIA support"
+	depends on ARCNET_COM20020 && PCMCIA
+	help
+	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
+	  to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called com20020_cs.  If unsure, say N.
+
 endif # ARCNET
diff --git a/drivers/net/arcnet/Makefile b/drivers/net/arcnet/Makefile
index 5861af543d42..5ce8ee63e435 100644
--- a/drivers/net/arcnet/Makefile
+++ b/drivers/net/arcnet/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_ARCNET_RIM_I) += arc-rimi.o
 obj-$(CONFIG_ARCNET_COM20020) += com20020.o
 obj-$(CONFIG_ARCNET_COM20020_ISA) += com20020-isa.o
 obj-$(CONFIG_ARCNET_COM20020_PCI) += com20020-pci.o
+obj-$(CONFIG_ARCNET_COM20020_CS) += com20020_cs.o
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 7bfb91f32857..7b96c5f47e8d 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -154,7 +154,7 @@ const struct net_device_ops com20020_netdev_ops = {
 	.ndo_stop	= arcnet_close,
 	.ndo_start_xmit = arcnet_send_packet,
 	.ndo_tx_timeout = arcnet_timeout,
-	.ndo_set_multicast_list = com20020_set_mc_list,
+	.ndo_set_rx_mode = com20020_set_mc_list,
 };
 
 /* Set up the struct net_device associated with this card.  Called after
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c
index 980e65c14936..980e65c14936 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/arcnet/com20020_cs.c
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
deleted file mode 100644
index 39e1c0d39476..000000000000
--- a/drivers/net/arm/Kconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-# Acorn Network device configuration
-#  These are for Acorn's Expansion card network interfaces
-#
-config ARM_AM79C961A
-	bool "ARM EBSA110 AM79C961A support"
-	depends on ARM && ARCH_EBSA110
-	select CRC32
-	help
-	  If you wish to compile a kernel for the EBSA-110, then you should
-	  always answer Y to this.
-
-config ARM_ETHER1
-	tristate "Acorn Ether1 support"
-	depends on ARM && ARCH_ACORN
-	help
-	  If you have an Acorn system with one of these (AKA25) network cards,
-	  you should say Y to this option if you wish to use it with Linux.
-
-config ARM_ETHER3
-	tristate "Acorn/ANT Ether3 support"
-	depends on ARM && ARCH_ACORN
-	help
-	  If you have an Acorn system with one of these network cards, you
-	  should say Y to this option if you wish to use it with Linux.
-
-config ARM_ETHERH
-	tristate "I-cubed EtherH/ANT EtherM support"
-	depends on ARM && ARCH_ACORN
-	select CRC32
-	help
-	  If you have an Acorn system with one of these network cards, you
-	  should say Y to this option if you wish to use it with Linux.
-
-config ARM_AT91_ETHER
-	tristate "AT91RM9200 Ethernet support"
-	depends on ARM && ARCH_AT91RM9200
-	select MII
-	help
-	  If you wish to compile a kernel for the AT91RM9200 and enable
-	  ethernet support, then you should always answer Y to this.
-
-config ARM_KS8695_ETHER
-	tristate "KS8695 Ethernet support"
-	depends on ARM && ARCH_KS8695
-	select MII
-	help
-	  If you wish to compile a kernel for the KS8695 and want to
-	  use the internal ethernet then you should answer Y to this.
-
-config EP93XX_ETH
-	tristate "EP93xx Ethernet support"
-	depends on ARM && ARCH_EP93XX
-	select MII
-	help
-	  This is a driver for the ethernet hardware included in EP93xx CPUs.
-	  Say Y if you are building a kernel for EP93xx based devices.
-
-config IXP4XX_ETH
-	tristate "Intel IXP4xx Ethernet support"
-	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
-	select PHYLIB
-	help
-	  Say Y here if you want to use built-in Ethernet ports
-	  on IXP4xx processor.
-
-config W90P910_ETH
-	tristate "Nuvoton w90p910 Ethernet support"
-	depends on ARM && ARCH_W90X900
-	select PHYLIB
-	select MII
-	help
-	  Say Y here if you want to use built-in Ethernet ports
-	  on w90p910 processor.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
deleted file mode 100644
index 303171f589e6..000000000000
--- a/drivers/net/arm/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# File: drivers/net/arm/Makefile
-#
-# Makefile for the ARM network device drivers
-#
-
-obj-$(CONFIG_ARM_AM79C961A)	+= am79c961a.o
-obj-$(CONFIG_ARM_ETHERH)	+= etherh.o
-obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
-obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
-obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
-obj-$(CONFIG_ARM_KS8695_ETHER)	+= ks8695net.o
-obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
-obj-$(CONFIG_IXP4XX_ETH)	+= ixp4xx_eth.o
-obj-$(CONFIG_W90P910_ETH)	+= w90p910_ether.o
diff --git a/drivers/net/benet/Kconfig b/drivers/net/benet/Kconfig
deleted file mode 100644
index 1a41a49bb619..000000000000
--- a/drivers/net/benet/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-config BE2NET
-	tristate "ServerEngines' 10Gbps NIC - BladeEngine"
-	depends on PCI && INET
-	help
-	This driver implements the NIC functionality for ServerEngines'
-	10Gbps network adapter - BladeEngine.
diff --git a/drivers/net/bna/bfi_ctreg.h b/drivers/net/bna/bfi_ctreg.h
deleted file mode 100644
index 5130d7918660..000000000000
--- a/drivers/net/bna/bfi_ctreg.h
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- */
-
-/*
- * bfi_ctreg.h catapult host block register definitions
- *
- * !!! Do not edit. Auto generated. !!!
- */
-
-#ifndef __BFI_CTREG_H__
-#define __BFI_CTREG_H__
-
-#define HOSTFN0_LPU_MBOX0_0		0x00019200
-#define HOSTFN1_LPU_MBOX0_8		0x00019260
-#define LPU_HOSTFN0_MBOX0_0		0x00019280
-#define LPU_HOSTFN1_MBOX0_8		0x000192e0
-#define HOSTFN2_LPU_MBOX0_0		0x00019400
-#define HOSTFN3_LPU_MBOX0_8		0x00019460
-#define LPU_HOSTFN2_MBOX0_0		0x00019480
-#define LPU_HOSTFN3_MBOX0_8		0x000194e0
-#define HOSTFN0_INT_STATUS		0x00014000
-#define __HOSTFN0_HALT_OCCURRED		0x01000000
-#define __HOSTFN0_INT_STATUS_LVL_MK	0x00f00000
-#define __HOSTFN0_INT_STATUS_LVL_SH	20
-#define __HOSTFN0_INT_STATUS_LVL(_v)	((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
-#define __HOSTFN0_INT_STATUS_P_MK	0x000f0000
-#define __HOSTFN0_INT_STATUS_P_SH	16
-#define __HOSTFN0_INT_STATUS_P(_v)	((_v) << __HOSTFN0_INT_STATUS_P_SH)
-#define __HOSTFN0_INT_STATUS_F		0x0000ffff
-#define HOSTFN0_INT_MSK			0x00014004
-#define HOST_PAGE_NUM_FN0		0x00014008
-#define __HOST_PAGE_NUM_FN		0x000001ff
-#define HOST_MSIX_ERR_INDEX_FN0		0x0001400c
-#define __MSIX_ERR_INDEX_FN		0x000001ff
-#define HOSTFN1_INT_STATUS		0x00014100
-#define __HOSTFN1_HALT_OCCURRED		0x01000000
-#define __HOSTFN1_INT_STATUS_LVL_MK	0x00f00000
-#define __HOSTFN1_INT_STATUS_LVL_SH	20
-#define __HOSTFN1_INT_STATUS_LVL(_v)	((_v) << __HOSTFN1_INT_STATUS_LVL_SH)
-#define __HOSTFN1_INT_STATUS_P_MK	0x000f0000
-#define __HOSTFN1_INT_STATUS_P_SH	16
-#define __HOSTFN1_INT_STATUS_P(_v)	((_v) << __HOSTFN1_INT_STATUS_P_SH)
-#define __HOSTFN1_INT_STATUS_F		0x0000ffff
-#define HOSTFN1_INT_MSK			0x00014104
-#define HOST_PAGE_NUM_FN1		0x00014108
-#define HOST_MSIX_ERR_INDEX_FN1		0x0001410c
-#define APP_PLL_425_CTL_REG		0x00014204
-#define __P_425_PLL_LOCK		0x80000000
-#define __APP_PLL_425_SRAM_USE_100MHZ	0x00100000
-#define __APP_PLL_425_RESET_TIMER_MK	0x000e0000
-#define __APP_PLL_425_RESET_TIMER_SH	17
-#define __APP_PLL_425_RESET_TIMER(_v)	((_v) << __APP_PLL_425_RESET_TIMER_SH)
-#define __APP_PLL_425_LOGIC_SOFT_RESET	0x00010000
-#define __APP_PLL_425_CNTLMT0_1_MK	0x0000c000
-#define __APP_PLL_425_CNTLMT0_1_SH	14
-#define __APP_PLL_425_CNTLMT0_1(_v)	((_v) << __APP_PLL_425_CNTLMT0_1_SH)
-#define __APP_PLL_425_JITLMT0_1_MK	0x00003000
-#define __APP_PLL_425_JITLMT0_1_SH	12
-#define __APP_PLL_425_JITLMT0_1(_v)	((_v) << __APP_PLL_425_JITLMT0_1_SH)
-#define __APP_PLL_425_HREF		0x00000800
-#define __APP_PLL_425_HDIV		0x00000400
-#define __APP_PLL_425_P0_1_MK		0x00000300
-#define __APP_PLL_425_P0_1_SH		8
-#define __APP_PLL_425_P0_1(_v)		((_v) << __APP_PLL_425_P0_1_SH)
-#define __APP_PLL_425_Z0_2_MK		0x000000e0
-#define __APP_PLL_425_Z0_2_SH		5
-#define __APP_PLL_425_Z0_2(_v)		((_v) << __APP_PLL_425_Z0_2_SH)
-#define __APP_PLL_425_RSEL200500	0x00000010
-#define __APP_PLL_425_ENARST		0x00000008
-#define __APP_PLL_425_BYPASS		0x00000004
-#define __APP_PLL_425_LRESETN		0x00000002
-#define __APP_PLL_425_ENABLE		0x00000001
-#define APP_PLL_312_CTL_REG		0x00014208
-#define __P_312_PLL_LOCK		0x80000000
-#define __ENABLE_MAC_AHB_1		0x00800000
-#define __ENABLE_MAC_AHB_0		0x00400000
-#define __ENABLE_MAC_1			0x00200000
-#define __ENABLE_MAC_0			0x00100000
-#define __APP_PLL_312_RESET_TIMER_MK	0x000e0000
-#define __APP_PLL_312_RESET_TIMER_SH	17
-#define __APP_PLL_312_RESET_TIMER(_v)	((_v) << __APP_PLL_312_RESET_TIMER_SH)
-#define __APP_PLL_312_LOGIC_SOFT_RESET	0x00010000
-#define __APP_PLL_312_CNTLMT0_1_MK	0x0000c000
-#define __APP_PLL_312_CNTLMT0_1_SH	14
-#define __APP_PLL_312_CNTLMT0_1(_v)	((_v) << __APP_PLL_312_CNTLMT0_1_SH)
-#define __APP_PLL_312_JITLMT0_1_MK	0x00003000
-#define __APP_PLL_312_JITLMT0_1_SH	12
-#define __APP_PLL_312_JITLMT0_1(_v)	((_v) << __APP_PLL_312_JITLMT0_1_SH)
-#define __APP_PLL_312_HREF		0x00000800
-#define __APP_PLL_312_HDIV		0x00000400
-#define __APP_PLL_312_P0_1_MK		0x00000300
-#define __APP_PLL_312_P0_1_SH		8
-#define __APP_PLL_312_P0_1(_v)		((_v) << __APP_PLL_312_P0_1_SH)
-#define __APP_PLL_312_Z0_2_MK		0x000000e0
-#define __APP_PLL_312_Z0_2_SH		5
-#define __APP_PLL_312_Z0_2(_v)		((_v) << __APP_PLL_312_Z0_2_SH)
-#define __APP_PLL_312_RSEL200500	0x00000010
-#define __APP_PLL_312_ENARST		0x00000008
-#define __APP_PLL_312_BYPASS		0x00000004
-#define __APP_PLL_312_LRESETN		0x00000002
-#define __APP_PLL_312_ENABLE		0x00000001
-#define MBIST_CTL_REG			0x00014220
-#define __EDRAM_BISTR_START		0x00000004
-#define __MBIST_RESET			0x00000002
-#define __MBIST_START			0x00000001
-#define MBIST_STAT_REG			0x00014224
-#define __EDRAM_BISTR_STATUS		0x00000008
-#define __EDRAM_BISTR_DONE		0x00000004
-#define __MEM_BIT_STATUS		0x00000002
-#define __MBIST_DONE			0x00000001
-#define HOST_SEM0_REG			0x00014230
-#define __HOST_SEMAPHORE		0x00000001
-#define HOST_SEM1_REG			0x00014234
-#define HOST_SEM2_REG			0x00014238
-#define HOST_SEM3_REG			0x0001423c
-#define HOST_SEM0_INFO_REG		0x00014240
-#define HOST_SEM1_INFO_REG		0x00014244
-#define HOST_SEM2_INFO_REG		0x00014248
-#define HOST_SEM3_INFO_REG		0x0001424c
-#define ETH_MAC_SER_REG			0x00014288
-#define __APP_EMS_CKBUFAMPIN		0x00000020
-#define __APP_EMS_REFCLKSEL		0x00000010
-#define __APP_EMS_CMLCKSEL		0x00000008
-#define __APP_EMS_REFCKBUFEN2		0x00000004
-#define __APP_EMS_REFCKBUFEN1		0x00000002
-#define __APP_EMS_CHANNEL_SEL		0x00000001
-#define HOSTFN2_INT_STATUS		0x00014300
-#define __HOSTFN2_HALT_OCCURRED		0x01000000
-#define __HOSTFN2_INT_STATUS_LVL_MK	0x00f00000
-#define __HOSTFN2_INT_STATUS_LVL_SH	20
-#define __HOSTFN2_INT_STATUS_LVL(_v)	((_v) << __HOSTFN2_INT_STATUS_LVL_SH)
-#define __HOSTFN2_INT_STATUS_P_MK	0x000f0000
-#define __HOSTFN2_INT_STATUS_P_SH	16
-#define __HOSTFN2_INT_STATUS_P(_v)	((_v) << __HOSTFN2_INT_STATUS_P_SH)
-#define __HOSTFN2_INT_STATUS_F		0x0000ffff
-#define HOSTFN2_INT_MSK			0x00014304
-#define HOST_PAGE_NUM_FN2		0x00014308
-#define HOST_MSIX_ERR_INDEX_FN2		0x0001430c
-#define HOSTFN3_INT_STATUS		0x00014400
-#define __HALT_OCCURRED			0x01000000
-#define __HOSTFN3_INT_STATUS_LVL_MK	0x00f00000
-#define __HOSTFN3_INT_STATUS_LVL_SH	20
-#define __HOSTFN3_INT_STATUS_LVL(_v)	((_v) << __HOSTFN3_INT_STATUS_LVL_SH)
-#define __HOSTFN3_INT_STATUS_P_MK	0x000f0000
-#define __HOSTFN3_INT_STATUS_P_SH	16
-#define __HOSTFN3_INT_STATUS_P(_v)	((_v) << __HOSTFN3_INT_STATUS_P_SH)
-#define __HOSTFN3_INT_STATUS_F		0x0000ffff
-#define HOSTFN3_INT_MSK			0x00014404
-#define HOST_PAGE_NUM_FN3		0x00014408
-#define HOST_MSIX_ERR_INDEX_FN3		0x0001440c
-#define FNC_ID_REG			0x00014600
-#define __FUNCTION_NUMBER		0x00000007
-#define FNC_PERS_REG			0x00014604
-#define __F3_FUNCTION_ACTIVE		0x80000000
-#define __F3_FUNCTION_MODE		0x40000000
-#define __F3_PORT_MAP_MK		0x30000000
-#define __F3_PORT_MAP_SH		28
-#define __F3_PORT_MAP(_v)		((_v) << __F3_PORT_MAP_SH)
-#define __F3_VM_MODE			0x08000000
-#define __F3_INTX_STATUS_MK		0x07000000
-#define __F3_INTX_STATUS_SH		24
-#define __F3_INTX_STATUS(_v)		((_v) << __F3_INTX_STATUS_SH)
-#define __F2_FUNCTION_ACTIVE		0x00800000
-#define __F2_FUNCTION_MODE		0x00400000
-#define __F2_PORT_MAP_MK		0x00300000
-#define __F2_PORT_MAP_SH		20
-#define __F2_PORT_MAP(_v)		((_v) << __F2_PORT_MAP_SH)
-#define __F2_VM_MODE			0x00080000
-#define __F2_INTX_STATUS_MK		0x00070000
-#define __F2_INTX_STATUS_SH		16
-#define __F2_INTX_STATUS(_v)		((_v) << __F2_INTX_STATUS_SH)
-#define __F1_FUNCTION_ACTIVE		0x00008000
-#define __F1_FUNCTION_MODE		0x00004000
-#define __F1_PORT_MAP_MK		0x00003000
-#define __F1_PORT_MAP_SH		12
-#define __F1_PORT_MAP(_v)		((_v) << __F1_PORT_MAP_SH)
-#define __F1_VM_MODE			0x00000800
-#define __F1_INTX_STATUS_MK		0x00000700
-#define __F1_INTX_STATUS_SH		8
-#define __F1_INTX_STATUS(_v)		((_v) << __F1_INTX_STATUS_SH)
-#define __F0_FUNCTION_ACTIVE		0x00000080
-#define __F0_FUNCTION_MODE		0x00000040
-#define __F0_PORT_MAP_MK		0x00000030
-#define __F0_PORT_MAP_SH		4
-#define __F0_PORT_MAP(_v)		((_v) << __F0_PORT_MAP_SH)
-#define __F0_VM_MODE		0x00000008
-#define __F0_INTX_STATUS		0x00000007
-enum {
-	__F0_INTX_STATUS_MSIX		= 0x0,
-	__F0_INTX_STATUS_INTA		= 0x1,
-	__F0_INTX_STATUS_INTB		= 0x2,
-	__F0_INTX_STATUS_INTC		= 0x3,
-	__F0_INTX_STATUS_INTD		= 0x4,
-};
-#define OP_MODE				0x0001460c
-#define __APP_ETH_CLK_LOWSPEED		0x00000004
-#define __GLOBAL_CORECLK_HALFSPEED	0x00000002
-#define __GLOBAL_FCOE_MODE		0x00000001
-#define HOST_SEM4_REG			0x00014610
-#define HOST_SEM5_REG			0x00014614
-#define HOST_SEM6_REG			0x00014618
-#define HOST_SEM7_REG			0x0001461c
-#define HOST_SEM4_INFO_REG		0x00014620
-#define HOST_SEM5_INFO_REG		0x00014624
-#define HOST_SEM6_INFO_REG		0x00014628
-#define HOST_SEM7_INFO_REG		0x0001462c
-#define HOSTFN0_LPU0_MBOX0_CMD_STAT	0x00019000
-#define __HOSTFN0_LPU0_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN0_LPU0_MBOX0_INFO_SH	1
-#define __HOSTFN0_LPU0_MBOX0_INFO(_v)	((_v) << __HOSTFN0_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN0_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN0_LPU1_MBOX0_CMD_STAT	0x00019004
-#define __HOSTFN0_LPU1_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN0_LPU1_MBOX0_INFO_SH	1
-#define __HOSTFN0_LPU1_MBOX0_INFO(_v)	((_v) << __HOSTFN0_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN0_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN0_MBOX0_CMD_STAT	0x00019008
-#define __LPU0_HOSTFN0_MBOX0_INFO_MK	0xfffffffe
-#define __LPU0_HOSTFN0_MBOX0_INFO_SH	1
-#define __LPU0_HOSTFN0_MBOX0_INFO(_v)	((_v) << __LPU0_HOSTFN0_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN0_MBOX0_CMD_STAT	0x0001900c
-#define __LPU1_HOSTFN0_MBOX0_INFO_MK	0xfffffffe
-#define __LPU1_HOSTFN0_MBOX0_INFO_SH	1
-#define __LPU1_HOSTFN0_MBOX0_INFO(_v)	((_v) << __LPU1_HOSTFN0_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU0_MBOX0_CMD_STAT	0x00019010
-#define __HOSTFN1_LPU0_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN1_LPU0_MBOX0_INFO_SH	1
-#define __HOSTFN1_LPU0_MBOX0_INFO(_v)	((_v) << __HOSTFN1_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN1_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU1_MBOX0_CMD_STAT	0x00019014
-#define __HOSTFN1_LPU1_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN1_LPU1_MBOX0_INFO_SH	1
-#define __HOSTFN1_LPU1_MBOX0_INFO(_v)	((_v) << __HOSTFN1_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN1_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN1_MBOX0_CMD_STAT	0x00019018
-#define __LPU0_HOSTFN1_MBOX0_INFO_MK	0xfffffffe
-#define __LPU0_HOSTFN1_MBOX0_INFO_SH	1
-#define __LPU0_HOSTFN1_MBOX0_INFO(_v)	((_v) << __LPU0_HOSTFN1_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN1_MBOX0_CMD_STAT	0x0001901c
-#define __LPU1_HOSTFN1_MBOX0_INFO_MK	0xfffffffe
-#define __LPU1_HOSTFN1_MBOX0_INFO_SH	1
-#define __LPU1_HOSTFN1_MBOX0_INFO(_v)	((_v) << __LPU1_HOSTFN1_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN2_LPU0_MBOX0_CMD_STAT	0x00019150
-#define __HOSTFN2_LPU0_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN2_LPU0_MBOX0_INFO_SH	1
-#define __HOSTFN2_LPU0_MBOX0_INFO(_v)	((_v) << __HOSTFN2_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN2_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN2_LPU1_MBOX0_CMD_STAT	0x00019154
-#define __HOSTFN2_LPU1_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN2_LPU1_MBOX0_INFO_SH	1
-#define __HOSTFN2_LPU1_MBOX0_INFO(_v)	((_v) << __HOSTFN2_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN2_LPU1_MBOX0BOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN2_MBOX0_CMD_STAT	0x00019158
-#define __LPU0_HOSTFN2_MBOX0_INFO_MK	0xfffffffe
-#define __LPU0_HOSTFN2_MBOX0_INFO_SH	1
-#define __LPU0_HOSTFN2_MBOX0_INFO(_v)	((_v) << __LPU0_HOSTFN2_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN2_MBOX0_CMD_STAT	0x0001915c
-#define __LPU1_HOSTFN2_MBOX0_INFO_MK	0xfffffffe
-#define __LPU1_HOSTFN2_MBOX0_INFO_SH	1
-#define __LPU1_HOSTFN2_MBOX0_INFO(_v)	((_v) << __LPU1_HOSTFN2_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN3_LPU0_MBOX0_CMD_STAT	0x00019160
-#define __HOSTFN3_LPU0_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN3_LPU0_MBOX0_INFO_SH	1
-#define __HOSTFN3_LPU0_MBOX0_INFO(_v)	((_v) << __HOSTFN3_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN3_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN3_LPU1_MBOX0_CMD_STAT	0x00019164
-#define __HOSTFN3_LPU1_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN3_LPU1_MBOX0_INFO_SH	1
-#define __HOSTFN3_LPU1_MBOX0_INFO(_v)	((_v) << __HOSTFN3_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN3_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN3_MBOX0_CMD_STAT	0x00019168
-#define __LPU0_HOSTFN3_MBOX0_INFO_MK	0xfffffffe
-#define __LPU0_HOSTFN3_MBOX0_INFO_SH	1
-#define __LPU0_HOSTFN3_MBOX0_INFO(_v)	((_v) << __LPU0_HOSTFN3_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN3_MBOX0_CMD_STAT	0x0001916c
-#define __LPU1_HOSTFN3_MBOX0_INFO_MK	0xfffffffe
-#define __LPU1_HOSTFN3_MBOX0_INFO_SH	1
-#define __LPU1_HOSTFN3_MBOX0_INFO(_v)	((_v) << __LPU1_HOSTFN3_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN3_MBOX0_CMD_STATUS	0x00000001
-#define FW_INIT_HALT_P0			0x000191ac
-#define __FW_INIT_HALT_P		0x00000001
-#define FW_INIT_HALT_P1			0x000191bc
-#define CPE_PI_PTR_Q0			0x00038000
-#define __CPE_PI_UNUSED_MK		0xffff0000
-#define __CPE_PI_UNUSED_SH		16
-#define __CPE_PI_UNUSED(_v)		((_v) << __CPE_PI_UNUSED_SH)
-#define __CPE_PI_PTR			0x0000ffff
-#define CPE_PI_PTR_Q1			0x00038040
-#define CPE_CI_PTR_Q0			0x00038004
-#define __CPE_CI_UNUSED_MK		0xffff0000
-#define __CPE_CI_UNUSED_SH		16
-#define __CPE_CI_UNUSED(_v)		((_v) << __CPE_CI_UNUSED_SH)
-#define __CPE_CI_PTR			0x0000ffff
-#define CPE_CI_PTR_Q1			0x00038044
-#define CPE_DEPTH_Q0			0x00038008
-#define __CPE_DEPTH_UNUSED_MK		0xf8000000
-#define __CPE_DEPTH_UNUSED_SH		27
-#define __CPE_DEPTH_UNUSED(_v)		((_v) << __CPE_DEPTH_UNUSED_SH)
-#define __CPE_MSIX_VEC_INDEX_MK		0x07ff0000
-#define __CPE_MSIX_VEC_INDEX_SH		16
-#define __CPE_MSIX_VEC_INDEX(_v)	((_v) << __CPE_MSIX_VEC_INDEX_SH)
-#define __CPE_DEPTH			0x0000ffff
-#define CPE_DEPTH_Q1			0x00038048
-#define CPE_QCTRL_Q0			0x0003800c
-#define __CPE_CTRL_UNUSED30_MK		0xfc000000
-#define __CPE_CTRL_UNUSED30_SH		26
-#define __CPE_CTRL_UNUSED30(_v)		((_v) << __CPE_CTRL_UNUSED30_SH)
-#define __CPE_FUNC_INT_CTRL_MK		0x03000000
-#define __CPE_FUNC_INT_CTRL_SH		24
-#define __CPE_FUNC_INT_CTRL(_v)		((_v) << __CPE_FUNC_INT_CTRL_SH)
-enum {
-	__CPE_FUNC_INT_CTRL_DISABLE		= 0x0,
-	__CPE_FUNC_INT_CTRL_F2NF		= 0x1,
-	__CPE_FUNC_INT_CTRL_3QUART		= 0x2,
-	__CPE_FUNC_INT_CTRL_HALF		= 0x3,
-};
-#define __CPE_CTRL_UNUSED20_MK		0x00f00000
-#define __CPE_CTRL_UNUSED20_SH		20
-#define __CPE_CTRL_UNUSED20(_v)		((_v) << __CPE_CTRL_UNUSED20_SH)
-#define __CPE_SCI_TH_MK			0x000f0000
-#define __CPE_SCI_TH_SH			16
-#define __CPE_SCI_TH(_v)		((_v) << __CPE_SCI_TH_SH)
-#define __CPE_CTRL_UNUSED10_MK		0x0000c000
-#define __CPE_CTRL_UNUSED10_SH		14
-#define __CPE_CTRL_UNUSED10(_v)		((_v) << __CPE_CTRL_UNUSED10_SH)
-#define __CPE_ACK_PENDING		0x00002000
-#define __CPE_CTRL_UNUSED40_MK		0x00001c00
-#define __CPE_CTRL_UNUSED40_SH		10
-#define __CPE_CTRL_UNUSED40(_v)		((_v) << __CPE_CTRL_UNUSED40_SH)
-#define __CPE_PCIEID_MK			0x00000300
-#define __CPE_PCIEID_SH			8
-#define __CPE_PCIEID(_v)		((_v) << __CPE_PCIEID_SH)
-#define __CPE_CTRL_UNUSED00_MK		0x000000fe
-#define __CPE_CTRL_UNUSED00_SH		1
-#define __CPE_CTRL_UNUSED00(_v)		((_v) << __CPE_CTRL_UNUSED00_SH)
-#define __CPE_ESIZE			0x00000001
-#define CPE_QCTRL_Q1			0x0003804c
-#define __CPE_CTRL_UNUSED31_MK		0xfc000000
-#define __CPE_CTRL_UNUSED31_SH		26
-#define __CPE_CTRL_UNUSED31(_v)		((_v) << __CPE_CTRL_UNUSED31_SH)
-#define __CPE_CTRL_UNUSED21_MK		0x00f00000
-#define __CPE_CTRL_UNUSED21_SH		20
-#define __CPE_CTRL_UNUSED21(_v)		((_v) << __CPE_CTRL_UNUSED21_SH)
-#define __CPE_CTRL_UNUSED11_MK		0x0000c000
-#define __CPE_CTRL_UNUSED11_SH		14
-#define __CPE_CTRL_UNUSED11(_v)		((_v) << __CPE_CTRL_UNUSED11_SH)
-#define __CPE_CTRL_UNUSED41_MK		0x00001c00
-#define __CPE_CTRL_UNUSED41_SH		10
-#define __CPE_CTRL_UNUSED41(_v)		((_v) << __CPE_CTRL_UNUSED41_SH)
-#define __CPE_CTRL_UNUSED01_MK		0x000000fe
-#define __CPE_CTRL_UNUSED01_SH		1
-#define __CPE_CTRL_UNUSED01(_v)		((_v) << __CPE_CTRL_UNUSED01_SH)
-#define RME_PI_PTR_Q0			0x00038020
-#define __LATENCY_TIME_STAMP_MK		0xffff0000
-#define __LATENCY_TIME_STAMP_SH		16
-#define __LATENCY_TIME_STAMP(_v)	((_v) << __LATENCY_TIME_STAMP_SH)
-#define __RME_PI_PTR			0x0000ffff
-#define RME_PI_PTR_Q1			0x00038060
-#define RME_CI_PTR_Q0			0x00038024
-#define __DELAY_TIME_STAMP_MK		0xffff0000
-#define __DELAY_TIME_STAMP_SH		16
-#define __DELAY_TIME_STAMP(_v)		((_v) << __DELAY_TIME_STAMP_SH)
-#define __RME_CI_PTR			0x0000ffff
-#define RME_CI_PTR_Q1			0x00038064
-#define RME_DEPTH_Q0			0x00038028
-#define __RME_DEPTH_UNUSED_MK		0xf8000000
-#define __RME_DEPTH_UNUSED_SH		27
-#define __RME_DEPTH_UNUSED(_v)		((_v) << __RME_DEPTH_UNUSED_SH)
-#define __RME_MSIX_VEC_INDEX_MK		0x07ff0000
-#define __RME_MSIX_VEC_INDEX_SH		16
-#define __RME_MSIX_VEC_INDEX(_v)	((_v) << __RME_MSIX_VEC_INDEX_SH)
-#define __RME_DEPTH			0x0000ffff
-#define RME_DEPTH_Q1			0x00038068
-#define RME_QCTRL_Q0			0x0003802c
-#define __RME_INT_LATENCY_TIMER_MK	0xff000000
-#define __RME_INT_LATENCY_TIMER_SH	24
-#define __RME_INT_LATENCY_TIMER(_v)	((_v) << __RME_INT_LATENCY_TIMER_SH)
-#define __RME_INT_DELAY_TIMER_MK	0x00ff0000
-#define __RME_INT_DELAY_TIMER_SH	16
-#define __RME_INT_DELAY_TIMER(_v)	((_v) << __RME_INT_DELAY_TIMER_SH)
-#define __RME_INT_DELAY_DISABLE		0x00008000
-#define __RME_DLY_DELAY_DISABLE		0x00004000
-#define __RME_ACK_PENDING		0x00002000
-#define __RME_FULL_INTERRUPT_DISABLE	0x00001000
-#define __RME_CTRL_UNUSED10_MK		0x00000c00
-#define __RME_CTRL_UNUSED10_SH		10
-#define __RME_CTRL_UNUSED10(_v)		((_v) << __RME_CTRL_UNUSED10_SH)
-#define __RME_PCIEID_MK			0x00000300
-#define __RME_PCIEID_SH			8
-#define __RME_PCIEID(_v)		((_v) << __RME_PCIEID_SH)
-#define __RME_CTRL_UNUSED00_MK		0x000000fe
-#define __RME_CTRL_UNUSED00_SH		1
-#define __RME_CTRL_UNUSED00(_v)		((_v) << __RME_CTRL_UNUSED00_SH)
-#define __RME_ESIZE			0x00000001
-#define RME_QCTRL_Q1			0x0003806c
-#define __RME_CTRL_UNUSED11_MK		0x00000c00
-#define __RME_CTRL_UNUSED11_SH		10
-#define __RME_CTRL_UNUSED11(_v)		((_v) << __RME_CTRL_UNUSED11_SH)
-#define __RME_CTRL_UNUSED01_MK		0x000000fe
-#define __RME_CTRL_UNUSED01_SH		1
-#define __RME_CTRL_UNUSED01(_v)		((_v) << __RME_CTRL_UNUSED01_SH)
-#define PSS_CTL_REG			0x00018800
-#define __PSS_I2C_CLK_DIV_MK		0x007f0000
-#define __PSS_I2C_CLK_DIV_SH		16
-#define __PSS_I2C_CLK_DIV(_v)		((_v) << __PSS_I2C_CLK_DIV_SH)
-#define __PSS_LMEM_INIT_DONE		0x00001000
-#define __PSS_LMEM_RESET		0x00000200
-#define __PSS_LMEM_INIT_EN		0x00000100
-#define __PSS_LPU1_RESET		0x00000002
-#define __PSS_LPU0_RESET		0x00000001
-#define PSS_ERR_STATUS_REG		0x00018810
-#define __PSS_LPU1_TCM_READ_ERR		0x00200000
-#define __PSS_LPU0_TCM_READ_ERR		0x00100000
-#define __PSS_LMEM5_CORR_ERR		0x00080000
-#define __PSS_LMEM4_CORR_ERR		0x00040000
-#define __PSS_LMEM3_CORR_ERR		0x00020000
-#define __PSS_LMEM2_CORR_ERR		0x00010000
-#define __PSS_LMEM1_CORR_ERR		0x00008000
-#define __PSS_LMEM0_CORR_ERR		0x00004000
-#define __PSS_LMEM5_UNCORR_ERR		0x00002000
-#define __PSS_LMEM4_UNCORR_ERR		0x00001000
-#define __PSS_LMEM3_UNCORR_ERR		0x00000800
-#define __PSS_LMEM2_UNCORR_ERR		0x00000400
-#define __PSS_LMEM1_UNCORR_ERR		0x00000200
-#define __PSS_LMEM0_UNCORR_ERR		0x00000100
-#define __PSS_BAL_PERR			0x00000080
-#define __PSS_DIP_IF_ERR		0x00000040
-#define __PSS_IOH_IF_ERR		0x00000020
-#define __PSS_TDS_IF_ERR		0x00000010
-#define __PSS_RDS_IF_ERR		0x00000008
-#define __PSS_SGM_IF_ERR		0x00000004
-#define __PSS_LPU1_RAM_ERR		0x00000002
-#define __PSS_LPU0_RAM_ERR		0x00000001
-#define ERR_SET_REG			0x00018818
-#define __PSS_ERR_STATUS_SET		0x003fffff
-#define PMM_1T_RESET_REG_P0		0x0002381c
-#define __PMM_1T_RESET_P		0x00000001
-#define PMM_1T_RESET_REG_P1		0x00023c1c
-#define HQM_QSET0_RXQ_DRBL_P0		0x00038000
-#define __RXQ0_ADD_VECTORS_P		0x80000000
-#define __RXQ0_STOP_P			0x40000000
-#define __RXQ0_PRD_PTR_P		0x0000ffff
-#define HQM_QSET1_RXQ_DRBL_P0		0x00038080
-#define __RXQ1_ADD_VECTORS_P		0x80000000
-#define __RXQ1_STOP_P			0x40000000
-#define __RXQ1_PRD_PTR_P		0x0000ffff
-#define HQM_QSET0_RXQ_DRBL_P1		0x0003c000
-#define HQM_QSET1_RXQ_DRBL_P1		0x0003c080
-#define HQM_QSET0_TXQ_DRBL_P0		0x00038020
-#define __TXQ0_ADD_VECTORS_P		0x80000000
-#define __TXQ0_STOP_P			0x40000000
-#define __TXQ0_PRD_PTR_P		0x0000ffff
-#define HQM_QSET1_TXQ_DRBL_P0		0x000380a0
-#define __TXQ1_ADD_VECTORS_P		0x80000000
-#define __TXQ1_STOP_P			0x40000000
-#define __TXQ1_PRD_PTR_P		0x0000ffff
-#define HQM_QSET0_TXQ_DRBL_P1		0x0003c020
-#define HQM_QSET1_TXQ_DRBL_P1		0x0003c0a0
-#define HQM_QSET0_IB_DRBL_1_P0		0x00038040
-#define __IB1_0_ACK_P			0x80000000
-#define __IB1_0_DISABLE_P		0x40000000
-#define __IB1_0_COALESCING_CFG_P_MK	0x00ff0000
-#define __IB1_0_COALESCING_CFG_P_SH	16
-#define __IB1_0_COALESCING_CFG_P(_v)	((_v) << __IB1_0_COALESCING_CFG_P_SH)
-#define __IB1_0_NUM_OF_ACKED_EVENTS_P	0x0000ffff
-#define HQM_QSET1_IB_DRBL_1_P0		0x000380c0
-#define __IB1_1_ACK_P			0x80000000
-#define __IB1_1_DISABLE_P		0x40000000
-#define __IB1_1_COALESCING_CFG_P_MK	0x00ff0000
-#define __IB1_1_COALESCING_CFG_P_SH	16
-#define __IB1_1_COALESCING_CFG_P(_v)	((_v) << __IB1_1_COALESCING_CFG_P_SH)
-#define __IB1_1_NUM_OF_ACKED_EVENTS_P	0x0000ffff
-#define HQM_QSET0_IB_DRBL_1_P1		0x0003c040
-#define HQM_QSET1_IB_DRBL_1_P1		0x0003c0c0
-#define HQM_QSET0_IB_DRBL_2_P0		0x00038060
-#define __IB2_0_ACK_P			0x80000000
-#define __IB2_0_DISABLE_P		0x40000000
-#define __IB2_0_COALESCING_CFG_P_MK	0x00ff0000
-#define __IB2_0_COALESCING_CFG_P_SH	16
-#define __IB2_0_COALESCING_CFG_P(_v)	((_v) << __IB2_0_COALESCING_CFG_P_SH)
-#define __IB2_0_NUM_OF_ACKED_EVENTS_P	0x0000ffff
-#define HQM_QSET1_IB_DRBL_2_P0		0x000380e0
-#define __IB2_1_ACK_P			0x80000000
-#define __IB2_1_DISABLE_P		0x40000000
-#define __IB2_1_COALESCING_CFG_P_MK	0x00ff0000
-#define __IB2_1_COALESCING_CFG_P_SH	16
-#define __IB2_1_COALESCING_CFG_P(_v)	((_v) << __IB2_1_COALESCING_CFG_P_SH)
-#define __IB2_1_NUM_OF_ACKED_EVENTS_P	0x0000ffff
-#define HQM_QSET0_IB_DRBL_2_P1		0x0003c060
-#define HQM_QSET1_IB_DRBL_2_P1		0x0003c0e0
-
-/*
- * These definitions are either in error/missing in spec. Its auto-generated
- * from hard coded values in regparse.pl.
- */
-#define __EMPHPOST_AT_4G_MK_FIX		0x0000001c
-#define __EMPHPOST_AT_4G_SH_FIX		0x00000002
-#define __EMPHPRE_AT_4G_FIX		0x00000003
-#define __SFP_TXRATE_EN_FIX		0x00000100
-#define __SFP_RXRATE_EN_FIX		0x00000080
-
-/*
- * These register definitions are auto-generated from hard coded values
- * in regparse.pl.
- */
-
-/*
- * These register mapping definitions are auto-generated from mapping tables
- * in regparse.pl.
- */
-#define BFA_IOC0_HBEAT_REG		HOST_SEM0_INFO_REG
-#define BFA_IOC0_STATE_REG		HOST_SEM1_INFO_REG
-#define BFA_IOC1_HBEAT_REG		HOST_SEM2_INFO_REG
-#define BFA_IOC1_STATE_REG		HOST_SEM3_INFO_REG
-#define BFA_FW_USE_COUNT		 HOST_SEM4_INFO_REG
-#define BFA_IOC_FAIL_SYNC		HOST_SEM5_INFO_REG
-
-#define CPE_DEPTH_Q(__n) \
-	(CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
-#define CPE_QCTRL_Q(__n) \
-	(CPE_QCTRL_Q0 + (__n) * (CPE_QCTRL_Q1 - CPE_QCTRL_Q0))
-#define CPE_PI_PTR_Q(__n) \
-	(CPE_PI_PTR_Q0 + (__n) * (CPE_PI_PTR_Q1 - CPE_PI_PTR_Q0))
-#define CPE_CI_PTR_Q(__n) \
-	(CPE_CI_PTR_Q0 + (__n) * (CPE_CI_PTR_Q1 - CPE_CI_PTR_Q0))
-#define RME_DEPTH_Q(__n) \
-	(RME_DEPTH_Q0 + (__n) * (RME_DEPTH_Q1 - RME_DEPTH_Q0))
-#define RME_QCTRL_Q(__n) \
-	(RME_QCTRL_Q0 + (__n) * (RME_QCTRL_Q1 - RME_QCTRL_Q0))
-#define RME_PI_PTR_Q(__n) \
-	(RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
-#define RME_CI_PTR_Q(__n) \
-	(RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
-#define HQM_QSET_RXQ_DRBL_P0(__n) \
-	(HQM_QSET0_RXQ_DRBL_P0 + (__n) * \
-		(HQM_QSET1_RXQ_DRBL_P0 - HQM_QSET0_RXQ_DRBL_P0))
-#define HQM_QSET_TXQ_DRBL_P0(__n) \
-	(HQM_QSET0_TXQ_DRBL_P0 + (__n) * \
-		(HQM_QSET1_TXQ_DRBL_P0 - HQM_QSET0_TXQ_DRBL_P0))
-#define HQM_QSET_IB_DRBL_1_P0(__n) \
-	(HQM_QSET0_IB_DRBL_1_P0 + (__n) * \
-		(HQM_QSET1_IB_DRBL_1_P0 - HQM_QSET0_IB_DRBL_1_P0))
-#define HQM_QSET_IB_DRBL_2_P0(__n) \
-	(HQM_QSET0_IB_DRBL_2_P0 + (__n) * \
-		(HQM_QSET1_IB_DRBL_2_P0 - HQM_QSET0_IB_DRBL_2_P0))
-#define HQM_QSET_RXQ_DRBL_P1(__n) \
-	(HQM_QSET0_RXQ_DRBL_P1 + (__n) * \
-		(HQM_QSET1_RXQ_DRBL_P1 - HQM_QSET0_RXQ_DRBL_P1))
-#define HQM_QSET_TXQ_DRBL_P1(__n) \
-	(HQM_QSET0_TXQ_DRBL_P1 + (__n) * \
-		(HQM_QSET1_TXQ_DRBL_P1 - HQM_QSET0_TXQ_DRBL_P1))
-#define HQM_QSET_IB_DRBL_1_P1(__n) \
-	(HQM_QSET0_IB_DRBL_1_P1 + (__n) * \
-		(HQM_QSET1_IB_DRBL_1_P1 - HQM_QSET0_IB_DRBL_1_P1))
-#define HQM_QSET_IB_DRBL_2_P1(__n) \
-	(HQM_QSET0_IB_DRBL_2_P1 + (__n) * \
-		(HQM_QSET1_IB_DRBL_2_P1 - HQM_QSET0_IB_DRBL_2_P1))
-
-#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define CPE_Q_MASK(__q) ((__q) & 0x3)
-#define RME_Q_MASK(__q) ((__q) & 0x3)
-
-/*
- * PCI MSI-X vector defines
- */
-enum {
-	BFA_MSIX_CPE_Q0 = 0,
-	BFA_MSIX_CPE_Q1 = 1,
-	BFA_MSIX_CPE_Q2 = 2,
-	BFA_MSIX_CPE_Q3 = 3,
-	BFA_MSIX_RME_Q0 = 4,
-	BFA_MSIX_RME_Q1 = 5,
-	BFA_MSIX_RME_Q2 = 6,
-	BFA_MSIX_RME_Q3 = 7,
-	BFA_MSIX_LPU_ERR = 8,
-	BFA_MSIX_CT_MAX = 9,
-};
-
-/*
- * And corresponding host interrupt status bit field defines
- */
-#define __HFN_INT_CPE_Q0		0x00000001U
-#define __HFN_INT_CPE_Q1		0x00000002U
-#define __HFN_INT_CPE_Q2		0x00000004U
-#define __HFN_INT_CPE_Q3		0x00000008U
-#define __HFN_INT_CPE_Q4		0x00000010U
-#define __HFN_INT_CPE_Q5		0x00000020U
-#define __HFN_INT_CPE_Q6		0x00000040U
-#define __HFN_INT_CPE_Q7		0x00000080U
-#define __HFN_INT_RME_Q0		0x00000100U
-#define __HFN_INT_RME_Q1		0x00000200U
-#define __HFN_INT_RME_Q2		0x00000400U
-#define __HFN_INT_RME_Q3		0x00000800U
-#define __HFN_INT_RME_Q4		0x00001000U
-#define __HFN_INT_RME_Q5		0x00002000U
-#define __HFN_INT_RME_Q6		0x00004000U
-#define __HFN_INT_RME_Q7		0x00008000U
-#define __HFN_INT_ERR_EMC		0x00010000U
-#define __HFN_INT_ERR_LPU0		0x00020000U
-#define __HFN_INT_ERR_LPU1		0x00040000U
-#define __HFN_INT_ERR_PSS		0x00080000U
-#define __HFN_INT_MBOX_LPU0		0x00100000U
-#define __HFN_INT_MBOX_LPU1		0x00200000U
-#define __HFN_INT_MBOX1_LPU0		0x00400000U
-#define __HFN_INT_MBOX1_LPU1		0x00800000U
-#define __HFN_INT_LL_HALT		0x01000000U
-#define __HFN_INT_CPE_MASK		0x000000ffU
-#define __HFN_INT_RME_MASK		0x0000ff00U
-
-/*
- * catapult memory map.
- */
-#define LL_PGN_HQM0		0x0096
-#define LL_PGN_HQM1		0x0097
-#define PSS_SMEM_PAGE_START	0x8000
-#define PSS_SMEM_PGNUM(_pg0, _ma)	((_pg0) + ((_ma) >> 15))
-#define PSS_SMEM_PGOFF(_ma)	((_ma) & 0x7fff)
-
-/*
- * End of catapult memory map
- */
-
-#endif /* __BFI_CTREG_H__ */
diff --git a/drivers/net/bna/bfi_ll.h b/drivers/net/bna/bfi_ll.h
deleted file mode 100644
index bee4d054066a..000000000000
--- a/drivers/net/bna/bfi_ll.h
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- */
-#ifndef __BFI_LL_H__
-#define __BFI_LL_H__
-
-#include "bfi.h"
-
-#pragma pack(1)
-
-/**
- * @brief
- *	"enums" for all LL mailbox messages other than IOC
- */
-enum {
-	BFI_LL_H2I_MAC_UCAST_SET_REQ = 1,
-	BFI_LL_H2I_MAC_UCAST_ADD_REQ = 2,
-	BFI_LL_H2I_MAC_UCAST_DEL_REQ = 3,
-
-	BFI_LL_H2I_MAC_MCAST_ADD_REQ = 4,
-	BFI_LL_H2I_MAC_MCAST_DEL_REQ = 5,
-	BFI_LL_H2I_MAC_MCAST_FILTER_REQ = 6,
-	BFI_LL_H2I_MAC_MCAST_DEL_ALL_REQ = 7,
-
-	BFI_LL_H2I_PORT_ADMIN_REQ = 8,
-	BFI_LL_H2I_STATS_GET_REQ = 9,
-	BFI_LL_H2I_STATS_CLEAR_REQ = 10,
-
-	BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ = 11,
-	BFI_LL_H2I_RXF_DEFAULT_SET_REQ = 12,
-
-	BFI_LL_H2I_TXQ_STOP_REQ = 13,
-	BFI_LL_H2I_RXQ_STOP_REQ = 14,
-
-	BFI_LL_H2I_DIAG_LOOPBACK_REQ = 15,
-
-	BFI_LL_H2I_SET_PAUSE_REQ = 16,
-	BFI_LL_H2I_MTU_INFO_REQ = 17,
-
-	BFI_LL_H2I_RX_REQ = 18,
-} ;
-
-enum {
-	BFI_LL_I2H_MAC_UCAST_SET_RSP = BFA_I2HM(1),
-	BFI_LL_I2H_MAC_UCAST_ADD_RSP = BFA_I2HM(2),
-	BFI_LL_I2H_MAC_UCAST_DEL_RSP = BFA_I2HM(3),
-
-	BFI_LL_I2H_MAC_MCAST_ADD_RSP = BFA_I2HM(4),
-	BFI_LL_I2H_MAC_MCAST_DEL_RSP = BFA_I2HM(5),
-	BFI_LL_I2H_MAC_MCAST_FILTER_RSP = BFA_I2HM(6),
-	BFI_LL_I2H_MAC_MCAST_DEL_ALL_RSP = BFA_I2HM(7),
-
-	BFI_LL_I2H_PORT_ADMIN_RSP = BFA_I2HM(8),
-	BFI_LL_I2H_STATS_GET_RSP = BFA_I2HM(9),
-	BFI_LL_I2H_STATS_CLEAR_RSP = BFA_I2HM(10),
-
-	BFI_LL_I2H_RXF_PROMISCUOUS_SET_RSP = BFA_I2HM(11),
-	BFI_LL_I2H_RXF_DEFAULT_SET_RSP = BFA_I2HM(12),
-
-	BFI_LL_I2H_TXQ_STOP_RSP = BFA_I2HM(13),
-	BFI_LL_I2H_RXQ_STOP_RSP = BFA_I2HM(14),
-
-	BFI_LL_I2H_DIAG_LOOPBACK_RSP = BFA_I2HM(15),
-
-	BFI_LL_I2H_SET_PAUSE_RSP = BFA_I2HM(16),
-
-	BFI_LL_I2H_MTU_INFO_RSP = BFA_I2HM(17),
-	BFI_LL_I2H_RX_RSP = BFA_I2HM(18),
-
-	BFI_LL_I2H_LINK_DOWN_AEN = BFA_I2HM(19),
-	BFI_LL_I2H_LINK_UP_AEN = BFA_I2HM(20),
-
-	BFI_LL_I2H_PORT_ENABLE_AEN = BFA_I2HM(21),
-	BFI_LL_I2H_PORT_DISABLE_AEN = BFA_I2HM(22),
-} ;
-
-/**
- * @brief bfi_ll_mac_addr_req is used by:
- *        BFI_LL_H2I_MAC_UCAST_SET_REQ
- *        BFI_LL_H2I_MAC_UCAST_ADD_REQ
- *        BFI_LL_H2I_MAC_UCAST_DEL_REQ
- *        BFI_LL_H2I_MAC_MCAST_ADD_REQ
- *        BFI_LL_H2I_MAC_MCAST_DEL_REQ
- */
-struct bfi_ll_mac_addr_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		rxf_id;
-	u8		rsvd1[3];
-	mac_t		mac_addr;
-	u8		rsvd2[2];
-};
-
-/**
- * @brief bfi_ll_mcast_filter_req is used by:
- *	  BFI_LL_H2I_MAC_MCAST_FILTER_REQ
- */
-struct bfi_ll_mcast_filter_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		rxf_id;
-	u8		enable;
-	u8		rsvd[2];
-};
-
-/**
- * @brief bfi_ll_mcast_del_all is used by:
- *	  BFI_LL_H2I_MAC_MCAST_DEL_ALL_REQ
- */
-struct bfi_ll_mcast_del_all_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		   rxf_id;
-	u8		   rsvd[3];
-};
-
-/**
- * @brief bfi_ll_q_stop_req is used by:
- *	BFI_LL_H2I_TXQ_STOP_REQ
- *	BFI_LL_H2I_RXQ_STOP_REQ
- */
-struct bfi_ll_q_stop_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u32	q_id_mask[2];	/* !< bit-mask for queue ids */
-};
-
-/**
- * @brief bfi_ll_stats_req is used by:
- *    BFI_LL_I2H_STATS_GET_REQ
- *    BFI_LL_I2H_STATS_CLEAR_REQ
- */
-struct bfi_ll_stats_req {
-	struct bfi_mhdr mh;	/*!< common msg header */
-	u16 stats_mask;	/* !< bit-mask for non-function statistics */
-	u8	rsvd[2];
-	u32 rxf_id_mask[2];	/* !< bit-mask for RxF Statistics */
-	u32 txf_id_mask[2];	/* !< bit-mask for TxF Statistics */
-	union bfi_addr_u  host_buffer;	/* !< where statistics are returned */
-};
-
-/**
- * @brief defines for "stats_mask" above.
- */
-#define BFI_LL_STATS_MAC	(1 << 0)	/* !< MAC Statistics */
-#define BFI_LL_STATS_BPC	(1 << 1)	/* !< Pause Stats from BPC */
-#define BFI_LL_STATS_RAD	(1 << 2)	/* !< Rx Admission Statistics */
-#define BFI_LL_STATS_RX_FC	(1 << 3)	/* !< Rx FC Stats from RxA */
-#define BFI_LL_STATS_TX_FC	(1 << 4)	/* !< Tx FC Stats from TxA */
-
-#define BFI_LL_STATS_ALL	0x1f
-
-/**
- * @brief bfi_ll_port_admin_req
- */
-struct bfi_ll_port_admin_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		 up;
-	u8		 rsvd[3];
-};
-
-/**
- * @brief bfi_ll_rxf_req is used by:
- *      BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ
- *      BFI_LL_H2I_RXF_DEFAULT_SET_REQ
- */
-struct bfi_ll_rxf_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		rxf_id;
-	u8		enable;
-	u8		rsvd[2];
-};
-
-/**
- * @brief bfi_ll_rxf_multi_req is used by:
- *	BFI_LL_H2I_RX_REQ
- */
-struct bfi_ll_rxf_multi_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u32	rxf_id_mask[2];
-	u8		enable;
-	u8		rsvd[3];
-};
-
-/**
- * @brief enum for Loopback opmodes
- */
-enum {
-	BFI_LL_DIAG_LB_OPMODE_EXT = 0,
-	BFI_LL_DIAG_LB_OPMODE_CBL = 1,
-};
-
-/**
- * @brief bfi_ll_set_pause_req is used by:
- *	BFI_LL_H2I_SET_PAUSE_REQ
- */
-struct bfi_ll_set_pause_req {
-	struct bfi_mhdr mh;
-	u8		tx_pause; /* 1 = enable, 0 =  disable */
-	u8		rx_pause; /* 1 = enable, 0 =  disable */
-	u8		rsvd[2];
-};
-
-/**
- * @brief bfi_ll_mtu_info_req is used by:
- *	BFI_LL_H2I_MTU_INFO_REQ
- */
-struct bfi_ll_mtu_info_req {
-	struct bfi_mhdr mh;
-	u16	mtu;
-	u8		rsvd[2];
-};
-
-/**
- * @brief
- *	  Response header format used by all responses
- *	  For both responses and asynchronous notifications
- */
-struct bfi_ll_rsp {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		error;
-	u8		rsvd[3];
-};
-
-/**
- * @brief bfi_ll_cee_aen is used by:
- *	BFI_LL_I2H_LINK_DOWN_AEN
- *	BFI_LL_I2H_LINK_UP_AEN
- */
-struct bfi_ll_aen {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u32	reason;
-	u8		cee_linkup;
-	u8		prio_map;    /*!< LL priority bit-map */
-	u8		rsvd[2];
-};
-
-/**
- * @brief
- * 	The following error codes can be returned
- *	by the mbox commands
- */
-enum {
-	BFI_LL_CMD_OK 		= 0,
-	BFI_LL_CMD_FAIL 	= 1,
-	BFI_LL_CMD_DUP_ENTRY	= 2,	/* !< Duplicate entry in CAM */
-	BFI_LL_CMD_CAM_FULL	= 3,	/* !< CAM is full */
-	BFI_LL_CMD_NOT_OWNER	= 4,   	/* !< Not permitted, b'cos not owner */
-	BFI_LL_CMD_NOT_EXEC	= 5,   	/* !< Was not sent to f/w at all */
-	BFI_LL_CMD_WAITING	= 6,	/* !< Waiting for completion (VMware) */
-	BFI_LL_CMD_PORT_DISABLED	= 7,	/* !< port in disabled state */
-} ;
-
-/* Statistics */
-#define BFI_LL_TXF_ID_MAX  	64
-#define BFI_LL_RXF_ID_MAX  	64
-
-/* TxF Frame Statistics */
-struct bfi_ll_stats_txf {
-	u64 ucast_octets;
-	u64 ucast;
-	u64 ucast_vlan;
-
-	u64 mcast_octets;
-	u64 mcast;
-	u64 mcast_vlan;
-
-	u64 bcast_octets;
-	u64 bcast;
-	u64 bcast_vlan;
-
-	u64 errors;
-	u64 filter_vlan;      /* frames filtered due to VLAN */
-	u64 filter_mac_sa;    /* frames filtered due to SA check */
-};
-
-/* RxF Frame Statistics */
-struct bfi_ll_stats_rxf {
-	u64 ucast_octets;
-	u64 ucast;
-	u64 ucast_vlan;
-
-	u64 mcast_octets;
-	u64 mcast;
-	u64 mcast_vlan;
-
-	u64 bcast_octets;
-	u64 bcast;
-	u64 bcast_vlan;
-	u64 frame_drops;
-};
-
-/* FC Tx Frame Statistics */
-struct bfi_ll_stats_fc_tx {
-	u64 txf_ucast_octets;
-	u64 txf_ucast;
-	u64 txf_ucast_vlan;
-
-	u64 txf_mcast_octets;
-	u64 txf_mcast;
-	u64 txf_mcast_vlan;
-
-	u64 txf_bcast_octets;
-	u64 txf_bcast;
-	u64 txf_bcast_vlan;
-
-	u64 txf_parity_errors;
-	u64 txf_timeout;
-	u64 txf_fid_parity_errors;
-};
-
-/* FC Rx Frame Statistics */
-struct bfi_ll_stats_fc_rx {
-	u64 rxf_ucast_octets;
-	u64 rxf_ucast;
-	u64 rxf_ucast_vlan;
-
-	u64 rxf_mcast_octets;
-	u64 rxf_mcast;
-	u64 rxf_mcast_vlan;
-
-	u64 rxf_bcast_octets;
-	u64 rxf_bcast;
-	u64 rxf_bcast_vlan;
-};
-
-/* RAD Frame Statistics */
-struct bfi_ll_stats_rad {
-	u64 rx_frames;
-	u64 rx_octets;
-	u64 rx_vlan_frames;
-
-	u64 rx_ucast;
-	u64 rx_ucast_octets;
-	u64 rx_ucast_vlan;
-
-	u64 rx_mcast;
-	u64 rx_mcast_octets;
-	u64 rx_mcast_vlan;
-
-	u64 rx_bcast;
-	u64 rx_bcast_octets;
-	u64 rx_bcast_vlan;
-
-	u64 rx_drops;
-};
-
-/* BPC Tx Registers */
-struct bfi_ll_stats_bpc {
-	/* transmit stats */
-	u64 tx_pause[8];
-	u64 tx_zero_pause[8];	/*!< Pause cancellation */
-	/*!<Pause initiation rather than retention */
-	u64 tx_first_pause[8];
-
-	/* receive stats */
-	u64 rx_pause[8];
-	u64 rx_zero_pause[8];	/*!< Pause cancellation */
-	/*!<Pause initiation rather than retention */
-	u64 rx_first_pause[8];
-};
-
-/* MAC Rx Statistics */
-struct bfi_ll_stats_mac {
-	u64 frame_64;		/* both rx and tx counter */
-	u64 frame_65_127;		/* both rx and tx counter */
-	u64 frame_128_255;		/* both rx and tx counter */
-	u64 frame_256_511;		/* both rx and tx counter */
-	u64 frame_512_1023;	/* both rx and tx counter */
-	u64 frame_1024_1518;	/* both rx and tx counter */
-	u64 frame_1519_1522;	/* both rx and tx counter */
-
-	/* receive stats */
-	u64 rx_bytes;
-	u64 rx_packets;
-	u64 rx_fcs_error;
-	u64 rx_multicast;
-	u64 rx_broadcast;
-	u64 rx_control_frames;
-	u64 rx_pause;
-	u64 rx_unknown_opcode;
-	u64 rx_alignment_error;
-	u64 rx_frame_length_error;
-	u64 rx_code_error;
-	u64 rx_carrier_sense_error;
-	u64 rx_undersize;
-	u64 rx_oversize;
-	u64 rx_fragments;
-	u64 rx_jabber;
-	u64 rx_drop;
-
-	/* transmit stats */
-	u64 tx_bytes;
-	u64 tx_packets;
-	u64 tx_multicast;
-	u64 tx_broadcast;
-	u64 tx_pause;
-	u64 tx_deferral;
-	u64 tx_excessive_deferral;
-	u64 tx_single_collision;
-	u64 tx_muliple_collision;
-	u64 tx_late_collision;
-	u64 tx_excessive_collision;
-	u64 tx_total_collision;
-	u64 tx_pause_honored;
-	u64 tx_drop;
-	u64 tx_jabber;
-	u64 tx_fcs_error;
-	u64 tx_control_frame;
-	u64 tx_oversize;
-	u64 tx_undersize;
-	u64 tx_fragments;
-};
-
-/* Complete statistics */
-struct bfi_ll_stats {
-	struct bfi_ll_stats_mac		mac_stats;
-	struct bfi_ll_stats_bpc		bpc_stats;
-	struct bfi_ll_stats_rad		rad_stats;
-	struct bfi_ll_stats_fc_rx	fc_rx_stats;
-	struct bfi_ll_stats_fc_tx	fc_tx_stats;
-	struct bfi_ll_stats_rxf	rxf_stats[BFI_LL_RXF_ID_MAX];
-	struct bfi_ll_stats_txf	txf_stats[BFI_LL_TXF_ID_MAX];
-};
-
-#pragma pack()
-
-#endif  /* __BFI_LL_H__ */
diff --git a/drivers/net/bna/bna_ctrl.c b/drivers/net/bna/bna_ctrl.c
deleted file mode 100644
index cb2594c564dc..000000000000
--- a/drivers/net/bna/bna_ctrl.c
+++ /dev/null
@@ -1,3076 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- */
-#include "bna.h"
-#include "bfa_cs.h"
-
-static void bna_device_cb_port_stopped(void *arg, enum bna_cb_status status);
-
-static void
-bna_port_cb_link_up(struct bna_port *port, struct bfi_ll_aen *aen,
-			int status)
-{
-	int i;
-	u8 prio_map;
-
-	port->llport.link_status = BNA_LINK_UP;
-	if (aen->cee_linkup)
-		port->llport.link_status = BNA_CEE_UP;
-
-	/* Compute the priority */
-	prio_map = aen->prio_map;
-	if (prio_map) {
-		for (i = 0; i < 8; i++) {
-			if ((prio_map >> i) & 0x1)
-				break;
-		}
-		port->priority = i;
-	} else
-		port->priority = 0;
-
-	/* Dispatch events */
-	bna_tx_mod_cee_link_status(&port->bna->tx_mod, aen->cee_linkup);
-	bna_tx_mod_prio_changed(&port->bna->tx_mod, port->priority);
-	port->link_cbfn(port->bna->bnad, port->llport.link_status);
-}
-
-static void
-bna_port_cb_link_down(struct bna_port *port, int status)
-{
-	port->llport.link_status = BNA_LINK_DOWN;
-
-	/* Dispatch events */
-	bna_tx_mod_cee_link_status(&port->bna->tx_mod, BNA_LINK_DOWN);
-	port->link_cbfn(port->bna->bnad, BNA_LINK_DOWN);
-}
-
-static inline int
-llport_can_be_up(struct bna_llport *llport)
-{
-	int ready = 0;
-	if (llport->type == BNA_PORT_T_REGULAR)
-		ready = ((llport->flags & BNA_LLPORT_F_ADMIN_UP) &&
-			 (llport->flags & BNA_LLPORT_F_RX_STARTED) &&
-			 (llport->flags & BNA_LLPORT_F_PORT_ENABLED));
-	else
-		ready = ((llport->flags & BNA_LLPORT_F_ADMIN_UP) &&
-			 (llport->flags & BNA_LLPORT_F_RX_STARTED) &&
-			 !(llport->flags & BNA_LLPORT_F_PORT_ENABLED));
-	return ready;
-}
-
-#define llport_is_up llport_can_be_up
-
-enum bna_llport_event {
-	LLPORT_E_START			= 1,
-	LLPORT_E_STOP			= 2,
-	LLPORT_E_FAIL			= 3,
-	LLPORT_E_UP			= 4,
-	LLPORT_E_DOWN			= 5,
-	LLPORT_E_FWRESP_UP_OK		= 6,
-	LLPORT_E_FWRESP_UP_FAIL		= 7,
-	LLPORT_E_FWRESP_DOWN		= 8
-};
-
-static void
-bna_llport_cb_port_enabled(struct bna_llport *llport)
-{
-	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
-
-	if (llport_can_be_up(llport))
-		bfa_fsm_send_event(llport, LLPORT_E_UP);
-}
-
-static void
-bna_llport_cb_port_disabled(struct bna_llport *llport)
-{
-	int llport_up = llport_is_up(llport);
-
-	llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
-
-	if (llport_up)
-		bfa_fsm_send_event(llport, LLPORT_E_DOWN);
-}
-
-/**
- * MBOX
- */
-static int
-bna_is_aen(u8 msg_id)
-{
-	switch (msg_id) {
-	case BFI_LL_I2H_LINK_DOWN_AEN:
-	case BFI_LL_I2H_LINK_UP_AEN:
-	case BFI_LL_I2H_PORT_ENABLE_AEN:
-	case BFI_LL_I2H_PORT_DISABLE_AEN:
-		return 1;
-
-	default:
-		return 0;
-	}
-}
-
-static void
-bna_mbox_aen_callback(struct bna *bna, struct bfi_mbmsg *msg)
-{
-	struct bfi_ll_aen *aen = (struct bfi_ll_aen *)(msg);
-
-	switch (aen->mh.msg_id) {
-	case BFI_LL_I2H_LINK_UP_AEN:
-		bna_port_cb_link_up(&bna->port, aen, aen->reason);
-		break;
-	case BFI_LL_I2H_LINK_DOWN_AEN:
-		bna_port_cb_link_down(&bna->port, aen->reason);
-		break;
-	case BFI_LL_I2H_PORT_ENABLE_AEN:
-		bna_llport_cb_port_enabled(&bna->port.llport);
-		break;
-	case BFI_LL_I2H_PORT_DISABLE_AEN:
-		bna_llport_cb_port_disabled(&bna->port.llport);
-		break;
-	default:
-		break;
-	}
-}
-
-static void
-bna_ll_isr(void *llarg, struct bfi_mbmsg *msg)
-{
-	struct bna *bna = (struct bna *)(llarg);
-	struct bfi_ll_rsp *mb_rsp = (struct bfi_ll_rsp *)(msg);
-	struct bfi_mhdr *cmd_h, *rsp_h;
-	struct bna_mbox_qe *mb_qe = NULL;
-	int to_post = 0;
-	u8 aen = 0;
-	char message[BNA_MESSAGE_SIZE];
-
-	aen = bna_is_aen(mb_rsp->mh.msg_id);
-
-	if (!aen) {
-		mb_qe = bfa_q_first(&bna->mbox_mod.posted_q);
-		cmd_h = (struct bfi_mhdr *)(&mb_qe->cmd.msg[0]);
-		rsp_h = (struct bfi_mhdr *)(&mb_rsp->mh);
-
-		if ((BFA_I2HM(cmd_h->msg_id) == rsp_h->msg_id) &&
-		    (cmd_h->mtag.i2htok == rsp_h->mtag.i2htok)) {
-			/* Remove the request from posted_q, update state  */
-			list_del(&mb_qe->qe);
-			bna->mbox_mod.msg_pending--;
-			if (list_empty(&bna->mbox_mod.posted_q))
-				bna->mbox_mod.state = BNA_MBOX_FREE;
-			else
-				to_post = 1;
-
-			/* Dispatch the cbfn */
-			if (mb_qe->cbfn)
-				mb_qe->cbfn(mb_qe->cbarg, mb_rsp->error);
-
-			/* Post the next entry, if needed */
-			if (to_post) {
-				mb_qe = bfa_q_first(&bna->mbox_mod.posted_q);
-				bfa_nw_ioc_mbox_queue(&bna->device.ioc,
-							&mb_qe->cmd);
-			}
-		} else {
-			snprintf(message, BNA_MESSAGE_SIZE,
-				       "No matching rsp for [%d:%d:%d]\n",
-				       mb_rsp->mh.msg_class, mb_rsp->mh.msg_id,
-				       mb_rsp->mh.mtag.i2htok);
-		pr_info("%s", message);
-		}
-
-	} else
-		bna_mbox_aen_callback(bna, msg);
-}
-
-static void
-bna_err_handler(struct bna *bna, u32 intr_status)
-{
-	u32 init_halt;
-
-	if (intr_status & __HALT_STATUS_BITS) {
-		init_halt = readl(bna->device.ioc.ioc_regs.ll_halt);
-		init_halt &= ~__FW_INIT_HALT_P;
-		writel(init_halt, bna->device.ioc.ioc_regs.ll_halt);
-	}
-
-	bfa_nw_ioc_error_isr(&bna->device.ioc);
-}
-
-void
-bna_mbox_handler(struct bna *bna, u32 intr_status)
-{
-	if (BNA_IS_ERR_INTR(intr_status)) {
-		bna_err_handler(bna, intr_status);
-		return;
-	}
-	if (BNA_IS_MBOX_INTR(intr_status))
-		bfa_nw_ioc_mbox_isr(&bna->device.ioc);
-}
-
-void
-bna_mbox_send(struct bna *bna, struct bna_mbox_qe *mbox_qe)
-{
-	struct bfi_mhdr *mh;
-
-	mh = (struct bfi_mhdr *)(&mbox_qe->cmd.msg[0]);
-
-	mh->mtag.i2htok = htons(bna->mbox_mod.msg_ctr);
-	bna->mbox_mod.msg_ctr++;
-	bna->mbox_mod.msg_pending++;
-	if (bna->mbox_mod.state == BNA_MBOX_FREE) {
-		list_add_tail(&mbox_qe->qe, &bna->mbox_mod.posted_q);
-		bfa_nw_ioc_mbox_queue(&bna->device.ioc, &mbox_qe->cmd);
-		bna->mbox_mod.state = BNA_MBOX_POSTED;
-	} else {
-		list_add_tail(&mbox_qe->qe, &bna->mbox_mod.posted_q);
-	}
-}
-
-static void
-bna_mbox_flush_q(struct bna *bna, struct list_head *q)
-{
-	struct bna_mbox_qe *mb_qe = NULL;
-	struct list_head			*mb_q;
-	void 			(*cbfn)(void *arg, int status);
-	void 			*cbarg;
-
-	mb_q = &bna->mbox_mod.posted_q;
-
-	while (!list_empty(mb_q)) {
-		bfa_q_deq(mb_q, &mb_qe);
-		cbfn = mb_qe->cbfn;
-		cbarg = mb_qe->cbarg;
-		bfa_q_qe_init(mb_qe);
-		bna->mbox_mod.msg_pending--;
-
-		if (cbfn)
-			cbfn(cbarg, BNA_CB_NOT_EXEC);
-	}
-
-	bna->mbox_mod.state = BNA_MBOX_FREE;
-}
-
-static void
-bna_mbox_mod_start(struct bna_mbox_mod *mbox_mod)
-{
-}
-
-static void
-bna_mbox_mod_stop(struct bna_mbox_mod *mbox_mod)
-{
-	bna_mbox_flush_q(mbox_mod->bna, &mbox_mod->posted_q);
-}
-
-static void
-bna_mbox_mod_init(struct bna_mbox_mod *mbox_mod, struct bna *bna)
-{
-	bfa_nw_ioc_mbox_regisr(&bna->device.ioc, BFI_MC_LL, bna_ll_isr, bna);
-	mbox_mod->state = BNA_MBOX_FREE;
-	mbox_mod->msg_ctr = mbox_mod->msg_pending = 0;
-	INIT_LIST_HEAD(&mbox_mod->posted_q);
-	mbox_mod->bna = bna;
-}
-
-static void
-bna_mbox_mod_uninit(struct bna_mbox_mod *mbox_mod)
-{
-	mbox_mod->bna = NULL;
-}
-
-/**
- * LLPORT
- */
-#define call_llport_stop_cbfn(llport, status)\
-do {\
-	if ((llport)->stop_cbfn)\
-		(llport)->stop_cbfn(&(llport)->bna->port, status);\
-	(llport)->stop_cbfn = NULL;\
-} while (0)
-
-static void bna_fw_llport_up(struct bna_llport *llport);
-static void bna_fw_cb_llport_up(void *arg, int status);
-static void bna_fw_llport_down(struct bna_llport *llport);
-static void bna_fw_cb_llport_down(void *arg, int status);
-static void bna_llport_start(struct bna_llport *llport);
-static void bna_llport_stop(struct bna_llport *llport);
-static void bna_llport_fail(struct bna_llport *llport);
-
-enum bna_llport_state {
-	BNA_LLPORT_STOPPED		= 1,
-	BNA_LLPORT_DOWN			= 2,
-	BNA_LLPORT_UP_RESP_WAIT		= 3,
-	BNA_LLPORT_DOWN_RESP_WAIT	= 4,
-	BNA_LLPORT_UP			= 5,
-	BNA_LLPORT_LAST_RESP_WAIT 	= 6
-};
-
-bfa_fsm_state_decl(bna_llport, stopped, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, down, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, up_resp_wait, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, down_resp_wait, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, up, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, last_resp_wait, struct bna_llport,
-			enum bna_llport_event);
-
-static struct bfa_sm_table llport_sm_table[] = {
-	{BFA_SM(bna_llport_sm_stopped), BNA_LLPORT_STOPPED},
-	{BFA_SM(bna_llport_sm_down), BNA_LLPORT_DOWN},
-	{BFA_SM(bna_llport_sm_up_resp_wait), BNA_LLPORT_UP_RESP_WAIT},
-	{BFA_SM(bna_llport_sm_down_resp_wait), BNA_LLPORT_DOWN_RESP_WAIT},
-	{BFA_SM(bna_llport_sm_up), BNA_LLPORT_UP},
-	{BFA_SM(bna_llport_sm_last_resp_wait), BNA_LLPORT_LAST_RESP_WAIT}
-};
-
-static void
-bna_llport_sm_stopped_entry(struct bna_llport *llport)
-{
-	llport->bna->port.link_cbfn((llport)->bna->bnad, BNA_LINK_DOWN);
-	call_llport_stop_cbfn(llport, BNA_CB_SUCCESS);
-}
-
-static void
-bna_llport_sm_stopped(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_START:
-		bfa_fsm_set_state(llport, bna_llport_sm_down);
-		break;
-
-	case LLPORT_E_STOP:
-		call_llport_stop_cbfn(llport, BNA_CB_SUCCESS);
-		break;
-
-	case LLPORT_E_FAIL:
-		break;
-
-	case LLPORT_E_DOWN:
-		/* This event is received due to Rx objects failing */
-		/* No-op */
-		break;
-
-	case LLPORT_E_FWRESP_UP_OK:
-	case LLPORT_E_FWRESP_DOWN:
-		/**
-		 * These events are received due to flushing of mbox when
-		 * device fails
-		 */
-		/* No-op */
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_down_entry(struct bna_llport *llport)
-{
-	bnad_cb_port_link_status((llport)->bna->bnad, BNA_LINK_DOWN);
-}
-
-static void
-bna_llport_sm_down(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_STOP:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_UP:
-		bfa_fsm_set_state(llport, bna_llport_sm_up_resp_wait);
-		bna_fw_llport_up(llport);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_up_resp_wait_entry(struct bna_llport *llport)
-{
-	BUG_ON(!llport_can_be_up(llport));
-	/**
-	 * NOTE: Do not call bna_fw_llport_up() here. That will over step
-	 * mbox due to down_resp_wait -> up_resp_wait transition on event
-	 * LLPORT_E_UP
-	 */
-}
-
-static void
-bna_llport_sm_up_resp_wait(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_STOP:
-		bfa_fsm_set_state(llport, bna_llport_sm_last_resp_wait);
-		break;
-
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_DOWN:
-		bfa_fsm_set_state(llport, bna_llport_sm_down_resp_wait);
-		break;
-
-	case LLPORT_E_FWRESP_UP_OK:
-		bfa_fsm_set_state(llport, bna_llport_sm_up);
-		break;
-
-	case LLPORT_E_FWRESP_UP_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_down);
-		break;
-
-	case LLPORT_E_FWRESP_DOWN:
-		/* down_resp_wait -> up_resp_wait transition on LLPORT_E_UP */
-		bna_fw_llport_up(llport);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_down_resp_wait_entry(struct bna_llport *llport)
-{
-	/**
-	 * NOTE: Do not call bna_fw_llport_down() here. That will over step
-	 * mbox due to up_resp_wait -> down_resp_wait transition on event
-	 * LLPORT_E_DOWN
-	 */
-}
-
-static void
-bna_llport_sm_down_resp_wait(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_STOP:
-		bfa_fsm_set_state(llport, bna_llport_sm_last_resp_wait);
-		break;
-
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_UP:
-		bfa_fsm_set_state(llport, bna_llport_sm_up_resp_wait);
-		break;
-
-	case LLPORT_E_FWRESP_UP_OK:
-		/* up_resp_wait->down_resp_wait transition on LLPORT_E_DOWN */
-		bna_fw_llport_down(llport);
-		break;
-
-	case LLPORT_E_FWRESP_UP_FAIL:
-	case LLPORT_E_FWRESP_DOWN:
-		bfa_fsm_set_state(llport, bna_llport_sm_down);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_up_entry(struct bna_llport *llport)
-{
-}
-
-static void
-bna_llport_sm_up(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_STOP:
-		bfa_fsm_set_state(llport, bna_llport_sm_last_resp_wait);
-		bna_fw_llport_down(llport);
-		break;
-
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_DOWN:
-		bfa_fsm_set_state(llport, bna_llport_sm_down_resp_wait);
-		bna_fw_llport_down(llport);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_last_resp_wait_entry(struct bna_llport *llport)
-{
-}
-
-static void
-bna_llport_sm_last_resp_wait(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_DOWN:
-		/**
-		 * This event is received due to Rx objects stopping in
-		 * parallel to llport
-		 */
-		/* No-op */
-		break;
-
-	case LLPORT_E_FWRESP_UP_OK:
-		/* up_resp_wait->last_resp_wait transition on LLPORT_T_STOP */
-		bna_fw_llport_down(llport);
-		break;
-
-	case LLPORT_E_FWRESP_UP_FAIL:
-	case LLPORT_E_FWRESP_DOWN:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_fw_llport_admin_up(struct bna_llport *llport)
-{
-	struct bfi_ll_port_admin_req ll_req;
-
-	memset(&ll_req, 0, sizeof(ll_req));
-	ll_req.mh.msg_class = BFI_MC_LL;
-	ll_req.mh.msg_id = BFI_LL_H2I_PORT_ADMIN_REQ;
-	ll_req.mh.mtag.h2i.lpu_id = 0;
-
-	ll_req.up = BNA_STATUS_T_ENABLED;
-
-	bna_mbox_qe_fill(&llport->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_fw_cb_llport_up, llport);
-
-	bna_mbox_send(llport->bna, &llport->mbox_qe);
-}
-
-static void
-bna_fw_llport_up(struct bna_llport *llport)
-{
-	if (llport->type == BNA_PORT_T_REGULAR)
-		bna_fw_llport_admin_up(llport);
-}
-
-static void
-bna_fw_cb_llport_up(void *arg, int status)
-{
-	struct bna_llport *llport = (struct bna_llport *)arg;
-
-	bfa_q_qe_init(&llport->mbox_qe.qe);
-	if (status == BFI_LL_CMD_FAIL) {
-		if (llport->type == BNA_PORT_T_REGULAR)
-			llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
-		else
-			llport->flags &= ~BNA_LLPORT_F_ADMIN_UP;
-		bfa_fsm_send_event(llport, LLPORT_E_FWRESP_UP_FAIL);
-	} else
-		bfa_fsm_send_event(llport, LLPORT_E_FWRESP_UP_OK);
-}
-
-static void
-bna_fw_llport_admin_down(struct bna_llport *llport)
-{
-	struct bfi_ll_port_admin_req ll_req;
-
-	memset(&ll_req, 0, sizeof(ll_req));
-	ll_req.mh.msg_class = BFI_MC_LL;
-	ll_req.mh.msg_id = BFI_LL_H2I_PORT_ADMIN_REQ;
-	ll_req.mh.mtag.h2i.lpu_id = 0;
-
-	ll_req.up = BNA_STATUS_T_DISABLED;
-
-	bna_mbox_qe_fill(&llport->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_fw_cb_llport_down, llport);
-
-	bna_mbox_send(llport->bna, &llport->mbox_qe);
-}
-
-static void
-bna_fw_llport_down(struct bna_llport *llport)
-{
-	if (llport->type == BNA_PORT_T_REGULAR)
-		bna_fw_llport_admin_down(llport);
-}
-
-static void
-bna_fw_cb_llport_down(void *arg, int status)
-{
-	struct bna_llport *llport = (struct bna_llport *)arg;
-
-	bfa_q_qe_init(&llport->mbox_qe.qe);
-	bfa_fsm_send_event(llport, LLPORT_E_FWRESP_DOWN);
-}
-
-static void
-bna_port_cb_llport_stopped(struct bna_port *port,
-				enum bna_cb_status status)
-{
-	bfa_wc_down(&port->chld_stop_wc);
-}
-
-static void
-bna_llport_init(struct bna_llport *llport, struct bna *bna)
-{
-	llport->flags |= BNA_LLPORT_F_ADMIN_UP;
-	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
-	llport->type = BNA_PORT_T_REGULAR;
-	llport->bna = bna;
-
-	llport->link_status = BNA_LINK_DOWN;
-
-	llport->rx_started_count = 0;
-
-	llport->stop_cbfn = NULL;
-
-	bfa_q_qe_init(&llport->mbox_qe.qe);
-
-	bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-}
-
-static void
-bna_llport_uninit(struct bna_llport *llport)
-{
-	llport->flags &= ~BNA_LLPORT_F_ADMIN_UP;
-	llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
-
-	llport->bna = NULL;
-}
-
-static void
-bna_llport_start(struct bna_llport *llport)
-{
-	bfa_fsm_send_event(llport, LLPORT_E_START);
-}
-
-static void
-bna_llport_stop(struct bna_llport *llport)
-{
-	llport->stop_cbfn = bna_port_cb_llport_stopped;
-
-	bfa_fsm_send_event(llport, LLPORT_E_STOP);
-}
-
-static void
-bna_llport_fail(struct bna_llport *llport)
-{
-	/* Reset the physical port status to enabled */
-	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
-	bfa_fsm_send_event(llport, LLPORT_E_FAIL);
-}
-
-static int
-bna_llport_state_get(struct bna_llport *llport)
-{
-	return bfa_sm_to_state(llport_sm_table, llport->fsm);
-}
-
-void
-bna_llport_rx_started(struct bna_llport *llport)
-{
-	llport->rx_started_count++;
-
-	if (llport->rx_started_count == 1) {
-
-		llport->flags |= BNA_LLPORT_F_RX_STARTED;
-
-		if (llport_can_be_up(llport))
-			bfa_fsm_send_event(llport, LLPORT_E_UP);
-	}
-}
-
-void
-bna_llport_rx_stopped(struct bna_llport *llport)
-{
-	int llport_up = llport_is_up(llport);
-
-	llport->rx_started_count--;
-
-	if (llport->rx_started_count == 0) {
-
-		llport->flags &= ~BNA_LLPORT_F_RX_STARTED;
-
-		if (llport_up)
-			bfa_fsm_send_event(llport, LLPORT_E_DOWN);
-	}
-}
-
-/**
- * PORT
- */
-#define bna_port_chld_start(port)\
-do {\
-	enum bna_tx_type tx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_TX_T_REGULAR : BNA_TX_T_LOOPBACK;\
-	enum bna_rx_type rx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;\
-	bna_llport_start(&(port)->llport);\
-	bna_tx_mod_start(&(port)->bna->tx_mod, tx_type);\
-	bna_rx_mod_start(&(port)->bna->rx_mod, rx_type);\
-} while (0)
-
-#define bna_port_chld_stop(port)\
-do {\
-	enum bna_tx_type tx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_TX_T_REGULAR : BNA_TX_T_LOOPBACK;\
-	enum bna_rx_type rx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;\
-	bfa_wc_up(&(port)->chld_stop_wc);\
-	bfa_wc_up(&(port)->chld_stop_wc);\
-	bfa_wc_up(&(port)->chld_stop_wc);\
-	bna_llport_stop(&(port)->llport);\
-	bna_tx_mod_stop(&(port)->bna->tx_mod, tx_type);\
-	bna_rx_mod_stop(&(port)->bna->rx_mod, rx_type);\
-} while (0)
-
-#define bna_port_chld_fail(port)\
-do {\
-	bna_llport_fail(&(port)->llport);\
-	bna_tx_mod_fail(&(port)->bna->tx_mod);\
-	bna_rx_mod_fail(&(port)->bna->rx_mod);\
-} while (0)
-
-#define bna_port_rx_start(port)\
-do {\
-	enum bna_rx_type rx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;\
-	bna_rx_mod_start(&(port)->bna->rx_mod, rx_type);\
-} while (0)
-
-#define bna_port_rx_stop(port)\
-do {\
-	enum bna_rx_type rx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;\
-	bfa_wc_up(&(port)->chld_stop_wc);\
-	bna_rx_mod_stop(&(port)->bna->rx_mod, rx_type);\
-} while (0)
-
-#define call_port_stop_cbfn(port, status)\
-do {\
-	if ((port)->stop_cbfn)\
-		(port)->stop_cbfn((port)->stop_cbarg, status);\
-	(port)->stop_cbfn = NULL;\
-	(port)->stop_cbarg = NULL;\
-} while (0)
-
-#define call_port_pause_cbfn(port, status)\
-do {\
-	if ((port)->pause_cbfn)\
-		(port)->pause_cbfn((port)->bna->bnad, status);\
-	(port)->pause_cbfn = NULL;\
-} while (0)
-
-#define call_port_mtu_cbfn(port, status)\
-do {\
-	if ((port)->mtu_cbfn)\
-		(port)->mtu_cbfn((port)->bna->bnad, status);\
-	(port)->mtu_cbfn = NULL;\
-} while (0)
-
-static void bna_fw_pause_set(struct bna_port *port);
-static void bna_fw_cb_pause_set(void *arg, int status);
-static void bna_fw_mtu_set(struct bna_port *port);
-static void bna_fw_cb_mtu_set(void *arg, int status);
-
-enum bna_port_event {
-	PORT_E_START			= 1,
-	PORT_E_STOP			= 2,
-	PORT_E_FAIL			= 3,
-	PORT_E_PAUSE_CFG		= 4,
-	PORT_E_MTU_CFG			= 5,
-	PORT_E_CHLD_STOPPED		= 6,
-	PORT_E_FWRESP_PAUSE		= 7,
-	PORT_E_FWRESP_MTU		= 8
-};
-
-enum bna_port_state {
-	BNA_PORT_STOPPED		= 1,
-	BNA_PORT_MTU_INIT_WAIT		= 2,
-	BNA_PORT_PAUSE_INIT_WAIT	= 3,
-	BNA_PORT_LAST_RESP_WAIT		= 4,
-	BNA_PORT_STARTED		= 5,
-	BNA_PORT_PAUSE_CFG_WAIT		= 6,
-	BNA_PORT_RX_STOP_WAIT		= 7,
-	BNA_PORT_MTU_CFG_WAIT 		= 8,
-	BNA_PORT_CHLD_STOP_WAIT		= 9
-};
-
-bfa_fsm_state_decl(bna_port, stopped, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, mtu_init_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, pause_init_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, last_resp_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, started, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, pause_cfg_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, rx_stop_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, mtu_cfg_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, chld_stop_wait, struct bna_port,
-			enum bna_port_event);
-
-static struct bfa_sm_table port_sm_table[] = {
-	{BFA_SM(bna_port_sm_stopped), BNA_PORT_STOPPED},
-	{BFA_SM(bna_port_sm_mtu_init_wait), BNA_PORT_MTU_INIT_WAIT},
-	{BFA_SM(bna_port_sm_pause_init_wait), BNA_PORT_PAUSE_INIT_WAIT},
-	{BFA_SM(bna_port_sm_last_resp_wait), BNA_PORT_LAST_RESP_WAIT},
-	{BFA_SM(bna_port_sm_started), BNA_PORT_STARTED},
-	{BFA_SM(bna_port_sm_pause_cfg_wait), BNA_PORT_PAUSE_CFG_WAIT},
-	{BFA_SM(bna_port_sm_rx_stop_wait), BNA_PORT_RX_STOP_WAIT},
-	{BFA_SM(bna_port_sm_mtu_cfg_wait), BNA_PORT_MTU_CFG_WAIT},
-	{BFA_SM(bna_port_sm_chld_stop_wait), BNA_PORT_CHLD_STOP_WAIT}
-};
-
-static void
-bna_port_sm_stopped_entry(struct bna_port *port)
-{
-	call_port_pause_cbfn(port, BNA_CB_SUCCESS);
-	call_port_mtu_cbfn(port, BNA_CB_SUCCESS);
-	call_port_stop_cbfn(port, BNA_CB_SUCCESS);
-}
-
-static void
-bna_port_sm_stopped(struct bna_port *port, enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_START:
-		bfa_fsm_set_state(port, bna_port_sm_mtu_init_wait);
-		break;
-
-	case PORT_E_STOP:
-		call_port_stop_cbfn(port, BNA_CB_SUCCESS);
-		break;
-
-	case PORT_E_FAIL:
-		/* No-op */
-		break;
-
-	case PORT_E_PAUSE_CFG:
-		call_port_pause_cbfn(port, BNA_CB_SUCCESS);
-		break;
-
-	case PORT_E_MTU_CFG:
-		call_port_mtu_cbfn(port, BNA_CB_SUCCESS);
-		break;
-
-	case PORT_E_CHLD_STOPPED:
-		/**
-		 * This event is received due to LLPort, Tx and Rx objects
-		 * failing
-		 */
-		/* No-op */
-		break;
-
-	case PORT_E_FWRESP_PAUSE:
-	case PORT_E_FWRESP_MTU:
-		/**
-		 * These events are received due to flushing of mbox when
-		 * device fails
-		 */
-		/* No-op */
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_mtu_init_wait_entry(struct bna_port *port)
-{
-	bna_fw_mtu_set(port);
-}
-
-static void
-bna_port_sm_mtu_init_wait(struct bna_port *port, enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_STOP:
-		bfa_fsm_set_state(port, bna_port_sm_last_resp_wait);
-		break;
-
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		break;
-
-	case PORT_E_PAUSE_CFG:
-		/* No-op */
-		break;
-
-	case PORT_E_MTU_CFG:
-		port->flags |= BNA_PORT_F_MTU_CHANGED;
-		break;
-
-	case PORT_E_FWRESP_MTU:
-		if (port->flags & BNA_PORT_F_MTU_CHANGED) {
-			port->flags &= ~BNA_PORT_F_MTU_CHANGED;
-			bna_fw_mtu_set(port);
-		} else {
-			bfa_fsm_set_state(port, bna_port_sm_pause_init_wait);
-		}
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_pause_init_wait_entry(struct bna_port *port)
-{
-	bna_fw_pause_set(port);
-}
-
-static void
-bna_port_sm_pause_init_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_STOP:
-		bfa_fsm_set_state(port, bna_port_sm_last_resp_wait);
-		break;
-
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		break;
-
-	case PORT_E_PAUSE_CFG:
-		port->flags |= BNA_PORT_F_PAUSE_CHANGED;
-		break;
-
-	case PORT_E_MTU_CFG:
-		port->flags |= BNA_PORT_F_MTU_CHANGED;
-		break;
-
-	case PORT_E_FWRESP_PAUSE:
-		if (port->flags & BNA_PORT_F_PAUSE_CHANGED) {
-			port->flags &= ~BNA_PORT_F_PAUSE_CHANGED;
-			bna_fw_pause_set(port);
-		} else if (port->flags & BNA_PORT_F_MTU_CHANGED) {
-			port->flags &= ~BNA_PORT_F_MTU_CHANGED;
-			bfa_fsm_set_state(port, bna_port_sm_mtu_init_wait);
-		} else {
-			bfa_fsm_set_state(port, bna_port_sm_started);
-			bna_port_chld_start(port);
-		}
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_last_resp_wait_entry(struct bna_port *port)
-{
-}
-
-static void
-bna_port_sm_last_resp_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-	case PORT_E_FWRESP_PAUSE:
-	case PORT_E_FWRESP_MTU:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_started_entry(struct bna_port *port)
-{
-	/**
-	 * NOTE: Do not call bna_port_chld_start() here, since it will be
-	 * inadvertently called during pause_cfg_wait->started transition
-	 * as well
-	 */
-	call_port_pause_cbfn(port, BNA_CB_SUCCESS);
-	call_port_mtu_cbfn(port, BNA_CB_SUCCESS);
-}
-
-static void
-bna_port_sm_started(struct bna_port *port,
-			enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_STOP:
-		bfa_fsm_set_state(port, bna_port_sm_chld_stop_wait);
-		break;
-
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_PAUSE_CFG:
-		bfa_fsm_set_state(port, bna_port_sm_pause_cfg_wait);
-		break;
-
-	case PORT_E_MTU_CFG:
-		bfa_fsm_set_state(port, bna_port_sm_rx_stop_wait);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_pause_cfg_wait_entry(struct bna_port *port)
-{
-	bna_fw_pause_set(port);
-}
-
-static void
-bna_port_sm_pause_cfg_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_FWRESP_PAUSE:
-		bfa_fsm_set_state(port, bna_port_sm_started);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_rx_stop_wait_entry(struct bna_port *port)
-{
-	bna_port_rx_stop(port);
-}
-
-static void
-bna_port_sm_rx_stop_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_CHLD_STOPPED:
-		bfa_fsm_set_state(port, bna_port_sm_mtu_cfg_wait);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_mtu_cfg_wait_entry(struct bna_port *port)
-{
-	bna_fw_mtu_set(port);
-}
-
-static void
-bna_port_sm_mtu_cfg_wait(struct bna_port *port, enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_FWRESP_MTU:
-		bfa_fsm_set_state(port, bna_port_sm_started);
-		bna_port_rx_start(port);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_chld_stop_wait_entry(struct bna_port *port)
-{
-	bna_port_chld_stop(port);
-}
-
-static void
-bna_port_sm_chld_stop_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_CHLD_STOPPED:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_fw_pause_set(struct bna_port *port)
-{
-	struct bfi_ll_set_pause_req ll_req;
-
-	memset(&ll_req, 0, sizeof(ll_req));
-	ll_req.mh.msg_class = BFI_MC_LL;
-	ll_req.mh.msg_id = BFI_LL_H2I_SET_PAUSE_REQ;
-	ll_req.mh.mtag.h2i.lpu_id = 0;
-
-	ll_req.tx_pause = port->pause_config.tx_pause;
-	ll_req.rx_pause = port->pause_config.rx_pause;
-
-	bna_mbox_qe_fill(&port->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_fw_cb_pause_set, port);
-
-	bna_mbox_send(port->bna, &port->mbox_qe);
-}
-
-static void
-bna_fw_cb_pause_set(void *arg, int status)
-{
-	struct bna_port *port = (struct bna_port *)arg;
-
-	bfa_q_qe_init(&port->mbox_qe.qe);
-	bfa_fsm_send_event(port, PORT_E_FWRESP_PAUSE);
-}
-
-void
-bna_fw_mtu_set(struct bna_port *port)
-{
-	struct bfi_ll_mtu_info_req ll_req;
-
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_MTU_INFO_REQ, 0);
-	ll_req.mtu = htons((u16)port->mtu);
-
-	bna_mbox_qe_fill(&port->mbox_qe, &ll_req, sizeof(ll_req),
-				bna_fw_cb_mtu_set, port);
-	bna_mbox_send(port->bna, &port->mbox_qe);
-}
-
-void
-bna_fw_cb_mtu_set(void *arg, int status)
-{
-	struct bna_port *port = (struct bna_port *)arg;
-
-	bfa_q_qe_init(&port->mbox_qe.qe);
-	bfa_fsm_send_event(port, PORT_E_FWRESP_MTU);
-}
-
-static void
-bna_port_cb_chld_stopped(void *arg)
-{
-	struct bna_port *port = (struct bna_port *)arg;
-
-	bfa_fsm_send_event(port, PORT_E_CHLD_STOPPED);
-}
-
-static void
-bna_port_init(struct bna_port *port, struct bna *bna)
-{
-	port->bna = bna;
-	port->flags = 0;
-	port->mtu = 0;
-	port->type = BNA_PORT_T_REGULAR;
-
-	port->link_cbfn = bnad_cb_port_link_status;
-
-	port->chld_stop_wc.wc_resume = bna_port_cb_chld_stopped;
-	port->chld_stop_wc.wc_cbarg = port;
-	port->chld_stop_wc.wc_count = 0;
-
-	port->stop_cbfn = NULL;
-	port->stop_cbarg = NULL;
-
-	port->pause_cbfn = NULL;
-
-	port->mtu_cbfn = NULL;
-
-	bfa_q_qe_init(&port->mbox_qe.qe);
-
-	bfa_fsm_set_state(port, bna_port_sm_stopped);
-
-	bna_llport_init(&port->llport, bna);
-}
-
-static void
-bna_port_uninit(struct bna_port *port)
-{
-	bna_llport_uninit(&port->llport);
-
-	port->flags = 0;
-
-	port->bna = NULL;
-}
-
-static int
-bna_port_state_get(struct bna_port *port)
-{
-	return bfa_sm_to_state(port_sm_table, port->fsm);
-}
-
-static void
-bna_port_start(struct bna_port *port)
-{
-	port->flags |= BNA_PORT_F_DEVICE_READY;
-	if (port->flags & BNA_PORT_F_ENABLED)
-		bfa_fsm_send_event(port, PORT_E_START);
-}
-
-static void
-bna_port_stop(struct bna_port *port)
-{
-	port->stop_cbfn = bna_device_cb_port_stopped;
-	port->stop_cbarg = &port->bna->device;
-
-	port->flags &= ~BNA_PORT_F_DEVICE_READY;
-	bfa_fsm_send_event(port, PORT_E_STOP);
-}
-
-static void
-bna_port_fail(struct bna_port *port)
-{
-	port->flags &= ~BNA_PORT_F_DEVICE_READY;
-	bfa_fsm_send_event(port, PORT_E_FAIL);
-}
-
-void
-bna_port_cb_tx_stopped(struct bna_port *port, enum bna_cb_status status)
-{
-	bfa_wc_down(&port->chld_stop_wc);
-}
-
-void
-bna_port_cb_rx_stopped(struct bna_port *port, enum bna_cb_status status)
-{
-	bfa_wc_down(&port->chld_stop_wc);
-}
-
-int
-bna_port_mtu_get(struct bna_port *port)
-{
-	return port->mtu;
-}
-
-void
-bna_port_enable(struct bna_port *port)
-{
-	if (port->fsm != (bfa_sm_t)bna_port_sm_stopped)
-		return;
-
-	port->flags |= BNA_PORT_F_ENABLED;
-
-	if (port->flags & BNA_PORT_F_DEVICE_READY)
-		bfa_fsm_send_event(port, PORT_E_START);
-}
-
-void
-bna_port_disable(struct bna_port *port, enum bna_cleanup_type type,
-		 void (*cbfn)(void *, enum bna_cb_status))
-{
-	if (type == BNA_SOFT_CLEANUP) {
-		(*cbfn)(port->bna->bnad, BNA_CB_SUCCESS);
-		return;
-	}
-
-	port->stop_cbfn = cbfn;
-	port->stop_cbarg = port->bna->bnad;
-
-	port->flags &= ~BNA_PORT_F_ENABLED;
-
-	bfa_fsm_send_event(port, PORT_E_STOP);
-}
-
-void
-bna_port_pause_config(struct bna_port *port,
-		      struct bna_pause_config *pause_config,
-		      void (*cbfn)(struct bnad *, enum bna_cb_status))
-{
-	port->pause_config = *pause_config;
-
-	port->pause_cbfn = cbfn;
-
-	bfa_fsm_send_event(port, PORT_E_PAUSE_CFG);
-}
-
-void
-bna_port_mtu_set(struct bna_port *port, int mtu,
-		 void (*cbfn)(struct bnad *, enum bna_cb_status))
-{
-	port->mtu = mtu;
-
-	port->mtu_cbfn = cbfn;
-
-	bfa_fsm_send_event(port, PORT_E_MTU_CFG);
-}
-
-void
-bna_port_mac_get(struct bna_port *port, mac_t *mac)
-{
-	*mac = bfa_nw_ioc_get_mac(&port->bna->device.ioc);
-}
-
-/**
- * DEVICE
- */
-#define enable_mbox_intr(_device)\
-do {\
-	u32 intr_status;\
-	bna_intr_status_get((_device)->bna, intr_status);\
-	bnad_cb_device_enable_mbox_intr((_device)->bna->bnad);\
-	bna_mbox_intr_enable((_device)->bna);\
-} while (0)
-
-#define disable_mbox_intr(_device)\
-do {\
-	bna_mbox_intr_disable((_device)->bna);\
-	bnad_cb_device_disable_mbox_intr((_device)->bna->bnad);\
-} while (0)
-
-static const struct bna_chip_regs_offset reg_offset[] =
-{{HOST_PAGE_NUM_FN0, HOSTFN0_INT_STATUS,
-	HOSTFN0_INT_MASK, HOST_MSIX_ERR_INDEX_FN0},
-{HOST_PAGE_NUM_FN1, HOSTFN1_INT_STATUS,
-	HOSTFN1_INT_MASK, HOST_MSIX_ERR_INDEX_FN1},
-{HOST_PAGE_NUM_FN2, HOSTFN2_INT_STATUS,
-	HOSTFN2_INT_MASK, HOST_MSIX_ERR_INDEX_FN2},
-{HOST_PAGE_NUM_FN3, HOSTFN3_INT_STATUS,
-	HOSTFN3_INT_MASK, HOST_MSIX_ERR_INDEX_FN3},
-};
-
-enum bna_device_event {
-	DEVICE_E_ENABLE			= 1,
-	DEVICE_E_DISABLE		= 2,
-	DEVICE_E_IOC_READY		= 3,
-	DEVICE_E_IOC_FAILED		= 4,
-	DEVICE_E_IOC_DISABLED		= 5,
-	DEVICE_E_IOC_RESET		= 6,
-	DEVICE_E_PORT_STOPPED		= 7,
-};
-
-enum bna_device_state {
-	BNA_DEVICE_STOPPED		= 1,
-	BNA_DEVICE_IOC_READY_WAIT 	= 2,
-	BNA_DEVICE_READY		= 3,
-	BNA_DEVICE_PORT_STOP_WAIT 	= 4,
-	BNA_DEVICE_IOC_DISABLE_WAIT 	= 5,
-	BNA_DEVICE_FAILED		= 6
-};
-
-bfa_fsm_state_decl(bna_device, stopped, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, ioc_ready_wait, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, ready, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, port_stop_wait, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, ioc_disable_wait, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, failed, struct bna_device,
-			enum bna_device_event);
-
-static struct bfa_sm_table device_sm_table[] = {
-	{BFA_SM(bna_device_sm_stopped), BNA_DEVICE_STOPPED},
-	{BFA_SM(bna_device_sm_ioc_ready_wait), BNA_DEVICE_IOC_READY_WAIT},
-	{BFA_SM(bna_device_sm_ready), BNA_DEVICE_READY},
-	{BFA_SM(bna_device_sm_port_stop_wait), BNA_DEVICE_PORT_STOP_WAIT},
-	{BFA_SM(bna_device_sm_ioc_disable_wait), BNA_DEVICE_IOC_DISABLE_WAIT},
-	{BFA_SM(bna_device_sm_failed), BNA_DEVICE_FAILED},
-};
-
-static void
-bna_device_sm_stopped_entry(struct bna_device *device)
-{
-	if (device->stop_cbfn)
-		device->stop_cbfn(device->stop_cbarg, BNA_CB_SUCCESS);
-
-	device->stop_cbfn = NULL;
-	device->stop_cbarg = NULL;
-}
-
-static void
-bna_device_sm_stopped(struct bna_device *device,
-			enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_ENABLE:
-		if (device->intr_type == BNA_INTR_T_MSIX)
-			bna_mbox_msix_idx_set(device);
-		bfa_nw_ioc_enable(&device->ioc);
-		bfa_fsm_set_state(device, bna_device_sm_ioc_ready_wait);
-		break;
-
-	case DEVICE_E_DISABLE:
-		bfa_fsm_set_state(device, bna_device_sm_stopped);
-		break;
-
-	case DEVICE_E_IOC_RESET:
-		enable_mbox_intr(device);
-		break;
-
-	case DEVICE_E_IOC_FAILED:
-		bfa_fsm_set_state(device, bna_device_sm_failed);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_ioc_ready_wait_entry(struct bna_device *device)
-{
-	/**
-	 * Do not call bfa_ioc_enable() here. It must be called in the
-	 * previous state due to failed -> ioc_ready_wait transition.
-	 */
-}
-
-static void
-bna_device_sm_ioc_ready_wait(struct bna_device *device,
-				enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_DISABLE:
-		if (device->ready_cbfn)
-			device->ready_cbfn(device->ready_cbarg,
-						BNA_CB_INTERRUPT);
-		device->ready_cbfn = NULL;
-		device->ready_cbarg = NULL;
-		bfa_fsm_set_state(device, bna_device_sm_ioc_disable_wait);
-		break;
-
-	case DEVICE_E_IOC_READY:
-		bfa_fsm_set_state(device, bna_device_sm_ready);
-		break;
-
-	case DEVICE_E_IOC_FAILED:
-		bfa_fsm_set_state(device, bna_device_sm_failed);
-		break;
-
-	case DEVICE_E_IOC_RESET:
-		enable_mbox_intr(device);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_ready_entry(struct bna_device *device)
-{
-	bna_mbox_mod_start(&device->bna->mbox_mod);
-	bna_port_start(&device->bna->port);
-
-	if (device->ready_cbfn)
-		device->ready_cbfn(device->ready_cbarg,
-					BNA_CB_SUCCESS);
-	device->ready_cbfn = NULL;
-	device->ready_cbarg = NULL;
-}
-
-static void
-bna_device_sm_ready(struct bna_device *device, enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_DISABLE:
-		bfa_fsm_set_state(device, bna_device_sm_port_stop_wait);
-		break;
-
-	case DEVICE_E_IOC_FAILED:
-		bfa_fsm_set_state(device, bna_device_sm_failed);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_port_stop_wait_entry(struct bna_device *device)
-{
-	bna_port_stop(&device->bna->port);
-}
-
-static void
-bna_device_sm_port_stop_wait(struct bna_device *device,
-				enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_PORT_STOPPED:
-		bna_mbox_mod_stop(&device->bna->mbox_mod);
-		bfa_fsm_set_state(device, bna_device_sm_ioc_disable_wait);
-		break;
-
-	case DEVICE_E_IOC_FAILED:
-		disable_mbox_intr(device);
-		bna_port_fail(&device->bna->port);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_ioc_disable_wait_entry(struct bna_device *device)
-{
-	bfa_nw_ioc_disable(&device->ioc);
-}
-
-static void
-bna_device_sm_ioc_disable_wait(struct bna_device *device,
-				enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_IOC_DISABLED:
-		disable_mbox_intr(device);
-		bfa_fsm_set_state(device, bna_device_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_failed_entry(struct bna_device *device)
-{
-	disable_mbox_intr(device);
-	bna_port_fail(&device->bna->port);
-	bna_mbox_mod_stop(&device->bna->mbox_mod);
-
-	if (device->ready_cbfn)
-		device->ready_cbfn(device->ready_cbarg,
-					BNA_CB_FAIL);
-	device->ready_cbfn = NULL;
-	device->ready_cbarg = NULL;
-}
-
-static void
-bna_device_sm_failed(struct bna_device *device,
-			enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_DISABLE:
-		bfa_fsm_set_state(device, bna_device_sm_ioc_disable_wait);
-		break;
-
-	case DEVICE_E_IOC_RESET:
-		enable_mbox_intr(device);
-		bfa_fsm_set_state(device, bna_device_sm_ioc_ready_wait);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-/* IOC callback functions */
-
-static void
-bna_device_cb_iocll_ready(void *dev, enum bfa_status error)
-{
-	struct bna_device *device = (struct bna_device *)dev;
-
-	if (error)
-		bfa_fsm_send_event(device, DEVICE_E_IOC_FAILED);
-	else
-		bfa_fsm_send_event(device, DEVICE_E_IOC_READY);
-}
-
-static void
-bna_device_cb_iocll_disabled(void *dev)
-{
-	struct bna_device *device = (struct bna_device *)dev;
-
-	bfa_fsm_send_event(device, DEVICE_E_IOC_DISABLED);
-}
-
-static void
-bna_device_cb_iocll_failed(void *dev)
-{
-	struct bna_device *device = (struct bna_device *)dev;
-
-	bfa_fsm_send_event(device, DEVICE_E_IOC_FAILED);
-}
-
-static void
-bna_device_cb_iocll_reset(void *dev)
-{
-	struct bna_device *device = (struct bna_device *)dev;
-
-	bfa_fsm_send_event(device, DEVICE_E_IOC_RESET);
-}
-
-static struct bfa_ioc_cbfn bfa_iocll_cbfn = {
-	bna_device_cb_iocll_ready,
-	bna_device_cb_iocll_disabled,
-	bna_device_cb_iocll_failed,
-	bna_device_cb_iocll_reset
-};
-
-/* device */
-static void
-bna_adv_device_init(struct bna_device *device, struct bna *bna,
-		struct bna_res_info *res_info)
-{
-	u8 *kva;
-	u64 dma;
-
-	device->bna = bna;
-
-	kva = res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.mdl[0].kva;
-
-	/**
-	 * Attach common modules (Diag, SFP, CEE, Port) and claim respective
-	 * DMA memory.
-	 */
-	BNA_GET_DMA_ADDR(
-		&res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mdl[0].dma, dma);
-	kva = res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mdl[0].kva;
-
-	bfa_nw_cee_attach(&bna->cee, &device->ioc, bna);
-	bfa_nw_cee_mem_claim(&bna->cee, kva, dma);
-	kva += bfa_nw_cee_meminfo();
-	dma += bfa_nw_cee_meminfo();
-
-}
-
-static void
-bna_device_init(struct bna_device *device, struct bna *bna,
-		struct bna_res_info *res_info)
-{
-	u64 dma;
-
-	device->bna = bna;
-
-	/**
-	 * Attach IOC and claim:
-	 *	1. DMA memory for IOC attributes
-	 *	2. Kernel memory for FW trace
-	 */
-	bfa_nw_ioc_attach(&device->ioc, device, &bfa_iocll_cbfn);
-	bfa_nw_ioc_pci_init(&device->ioc, &bna->pcidev, BFI_MC_LL);
-
-	BNA_GET_DMA_ADDR(
-		&res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mdl[0].dma, dma);
-	bfa_nw_ioc_mem_claim(&device->ioc,
-		res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mdl[0].kva,
-			  dma);
-
-	bna_adv_device_init(device, bna, res_info);
-	/*
-	 * Initialize mbox_mod only after IOC, so that mbox handler
-	 * registration goes through
-	 */
-	device->intr_type =
-		res_info[BNA_RES_INTR_T_MBOX].res_u.intr_info.intr_type;
-	device->vector =
-		res_info[BNA_RES_INTR_T_MBOX].res_u.intr_info.idl[0].vector;
-	bna_mbox_mod_init(&bna->mbox_mod, bna);
-
-	device->ready_cbfn = device->stop_cbfn = NULL;
-	device->ready_cbarg = device->stop_cbarg = NULL;
-
-	bfa_fsm_set_state(device, bna_device_sm_stopped);
-}
-
-static void
-bna_device_uninit(struct bna_device *device)
-{
-	bna_mbox_mod_uninit(&device->bna->mbox_mod);
-
-	bfa_nw_ioc_detach(&device->ioc);
-
-	device->bna = NULL;
-}
-
-static void
-bna_device_cb_port_stopped(void *arg, enum bna_cb_status status)
-{
-	struct bna_device *device = (struct bna_device *)arg;
-
-	bfa_fsm_send_event(device, DEVICE_E_PORT_STOPPED);
-}
-
-static int
-bna_device_status_get(struct bna_device *device)
-{
-	return device->fsm == (bfa_fsm_t)bna_device_sm_ready;
-}
-
-void
-bna_device_enable(struct bna_device *device)
-{
-	if (device->fsm != (bfa_fsm_t)bna_device_sm_stopped) {
-		bnad_cb_device_enabled(device->bna->bnad, BNA_CB_BUSY);
-		return;
-	}
-
-	device->ready_cbfn = bnad_cb_device_enabled;
-	device->ready_cbarg = device->bna->bnad;
-
-	bfa_fsm_send_event(device, DEVICE_E_ENABLE);
-}
-
-void
-bna_device_disable(struct bna_device *device, enum bna_cleanup_type type)
-{
-	if (type == BNA_SOFT_CLEANUP) {
-		bnad_cb_device_disabled(device->bna->bnad, BNA_CB_SUCCESS);
-		return;
-	}
-
-	device->stop_cbfn = bnad_cb_device_disabled;
-	device->stop_cbarg = device->bna->bnad;
-
-	bfa_fsm_send_event(device, DEVICE_E_DISABLE);
-}
-
-static int
-bna_device_state_get(struct bna_device *device)
-{
-	return bfa_sm_to_state(device_sm_table, device->fsm);
-}
-
-const u32 bna_napi_dim_vector[BNA_LOAD_T_MAX][BNA_BIAS_T_MAX] = {
-	{12, 12},
-	{6, 10},
-	{5, 10},
-	{4, 8},
-	{3, 6},
-	{3, 6},
-	{2, 4},
-	{1, 2},
-};
-
-/* utils */
-
-static void
-bna_adv_res_req(struct bna_res_info *res_info)
-{
-	/* DMA memory for COMMON_MODULE */
-	res_info[BNA_RES_MEM_T_COM].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
-	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.len = ALIGN(
-				bfa_nw_cee_meminfo(), PAGE_SIZE);
-
-	/* Virtual memory for retreiving fw_trc */
-	res_info[BNA_RES_MEM_T_FWTRC].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.mem_type = BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.num = 0;
-	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.len = 0;
-
-	/* DMA memory for retreiving stats */
-	res_info[BNA_RES_MEM_T_STATS].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
-	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.len =
-				ALIGN(BFI_HW_STATS_SIZE, PAGE_SIZE);
-
-	/* Virtual memory for soft stats */
-	res_info[BNA_RES_MEM_T_SWSTATS].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_SWSTATS].res_u.mem_info.mem_type = BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_SWSTATS].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_SWSTATS].res_u.mem_info.len =
-				sizeof(struct bna_sw_stats);
-}
-
-static void
-bna_sw_stats_get(struct bna *bna, struct bna_sw_stats *sw_stats)
-{
-	struct bna_tx *tx;
-	struct bna_txq *txq;
-	struct bna_rx *rx;
-	struct bna_rxp *rxp;
-	struct list_head *qe;
-	struct list_head *txq_qe;
-	struct list_head *rxp_qe;
-	struct list_head *mac_qe;
-	int i;
-
-	sw_stats->device_state = bna_device_state_get(&bna->device);
-	sw_stats->port_state = bna_port_state_get(&bna->port);
-	sw_stats->port_flags = bna->port.flags;
-	sw_stats->llport_state = bna_llport_state_get(&bna->port.llport);
-	sw_stats->priority = bna->port.priority;
-
-	i = 0;
-	list_for_each(qe, &bna->tx_mod.tx_active_q) {
-		tx = (struct bna_tx *)qe;
-		sw_stats->tx_stats[i].tx_state = bna_tx_state_get(tx);
-		sw_stats->tx_stats[i].tx_flags = tx->flags;
-
-		sw_stats->tx_stats[i].num_txqs = 0;
-		sw_stats->tx_stats[i].txq_bmap[0] = 0;
-		sw_stats->tx_stats[i].txq_bmap[1] = 0;
-		list_for_each(txq_qe, &tx->txq_q) {
-			txq = (struct bna_txq *)txq_qe;
-			if (txq->txq_id < 32)
-				sw_stats->tx_stats[i].txq_bmap[0] |=
-						((u32)1 << txq->txq_id);
-			else
-				sw_stats->tx_stats[i].txq_bmap[1] |=
-						((u32)
-						 1 << (txq->txq_id - 32));
-			sw_stats->tx_stats[i].num_txqs++;
-		}
-
-		sw_stats->tx_stats[i].txf_id = tx->txf.txf_id;
-
-		i++;
-	}
-	sw_stats->num_active_tx = i;
-
-	i = 0;
-	list_for_each(qe, &bna->rx_mod.rx_active_q) {
-		rx = (struct bna_rx *)qe;
-		sw_stats->rx_stats[i].rx_state = bna_rx_state_get(rx);
-		sw_stats->rx_stats[i].rx_flags = rx->rx_flags;
-
-		sw_stats->rx_stats[i].num_rxps = 0;
-		sw_stats->rx_stats[i].num_rxqs = 0;
-		sw_stats->rx_stats[i].rxq_bmap[0] = 0;
-		sw_stats->rx_stats[i].rxq_bmap[1] = 0;
-		sw_stats->rx_stats[i].cq_bmap[0] = 0;
-		sw_stats->rx_stats[i].cq_bmap[1] = 0;
-		list_for_each(rxp_qe, &rx->rxp_q) {
-			rxp = (struct bna_rxp *)rxp_qe;
-
-			sw_stats->rx_stats[i].num_rxqs += 1;
-
-			if (rxp->type == BNA_RXP_SINGLE) {
-				if (rxp->rxq.single.only->rxq_id < 32) {
-					sw_stats->rx_stats[i].rxq_bmap[0] |=
-					((u32)1 <<
-					rxp->rxq.single.only->rxq_id);
-				} else {
-					sw_stats->rx_stats[i].rxq_bmap[1] |=
-					((u32)1 <<
-					(rxp->rxq.single.only->rxq_id - 32));
-				}
-			} else {
-				if (rxp->rxq.slr.large->rxq_id < 32) {
-					sw_stats->rx_stats[i].rxq_bmap[0] |=
-					((u32)1 <<
-					rxp->rxq.slr.large->rxq_id);
-				} else {
-					sw_stats->rx_stats[i].rxq_bmap[1] |=
-					((u32)1 <<
-					(rxp->rxq.slr.large->rxq_id - 32));
-				}
-
-				if (rxp->rxq.slr.small->rxq_id < 32) {
-					sw_stats->rx_stats[i].rxq_bmap[0] |=
-					((u32)1 <<
-					rxp->rxq.slr.small->rxq_id);
-				} else {
-					sw_stats->rx_stats[i].rxq_bmap[1] |=
-				((u32)1 <<
-				 (rxp->rxq.slr.small->rxq_id - 32));
-				}
-				sw_stats->rx_stats[i].num_rxqs += 1;
-			}
-
-			if (rxp->cq.cq_id < 32)
-				sw_stats->rx_stats[i].cq_bmap[0] |=
-					(1 << rxp->cq.cq_id);
-			else
-				sw_stats->rx_stats[i].cq_bmap[1] |=
-					(1 << (rxp->cq.cq_id - 32));
-
-			sw_stats->rx_stats[i].num_rxps++;
-		}
-
-		sw_stats->rx_stats[i].rxf_id = rx->rxf.rxf_id;
-		sw_stats->rx_stats[i].rxf_state = bna_rxf_state_get(&rx->rxf);
-		sw_stats->rx_stats[i].rxf_oper_state = rx->rxf.rxf_oper_state;
-
-		sw_stats->rx_stats[i].num_active_ucast = 0;
-		if (rx->rxf.ucast_active_mac)
-			sw_stats->rx_stats[i].num_active_ucast++;
-		list_for_each(mac_qe, &rx->rxf.ucast_active_q)
-			sw_stats->rx_stats[i].num_active_ucast++;
-
-		sw_stats->rx_stats[i].num_active_mcast = 0;
-		list_for_each(mac_qe, &rx->rxf.mcast_active_q)
-			sw_stats->rx_stats[i].num_active_mcast++;
-
-		sw_stats->rx_stats[i].rxmode_active = rx->rxf.rxmode_active;
-		sw_stats->rx_stats[i].vlan_filter_status =
-						rx->rxf.vlan_filter_status;
-		memcpy(sw_stats->rx_stats[i].vlan_filter_table,
-				rx->rxf.vlan_filter_table,
-				sizeof(u32) * ((BFI_MAX_VLAN + 1) / 32));
-
-		sw_stats->rx_stats[i].rss_status = rx->rxf.rss_status;
-		sw_stats->rx_stats[i].hds_status = rx->rxf.hds_status;
-
-		i++;
-	}
-	sw_stats->num_active_rx = i;
-}
-
-static void
-bna_fw_cb_stats_get(void *arg, int status)
-{
-	struct bna *bna = (struct bna *)arg;
-	u64 *p_stats;
-	int i, count;
-	int rxf_count, txf_count;
-	u64 rxf_bmap, txf_bmap;
-
-	bfa_q_qe_init(&bna->mbox_qe.qe);
-
-	if (status == 0) {
-		p_stats = (u64 *)bna->stats.hw_stats;
-		count = sizeof(struct bfi_ll_stats) / sizeof(u64);
-		for (i = 0; i < count; i++)
-			p_stats[i] = cpu_to_be64(p_stats[i]);
-
-		rxf_count = 0;
-		rxf_bmap = (u64)bna->stats.rxf_bmap[0] |
-			((u64)bna->stats.rxf_bmap[1] << 32);
-		for (i = 0; i < BFI_LL_RXF_ID_MAX; i++)
-			if (rxf_bmap & ((u64)1 << i))
-				rxf_count++;
-
-		txf_count = 0;
-		txf_bmap = (u64)bna->stats.txf_bmap[0] |
-			((u64)bna->stats.txf_bmap[1] << 32);
-		for (i = 0; i < BFI_LL_TXF_ID_MAX; i++)
-			if (txf_bmap & ((u64)1 << i))
-				txf_count++;
-
-		p_stats = (u64 *)&bna->stats.hw_stats->rxf_stats[0] +
-				((rxf_count * sizeof(struct bfi_ll_stats_rxf) +
-				txf_count * sizeof(struct bfi_ll_stats_txf))/
-				sizeof(u64));
-
-		/* Populate the TXF stats from the firmware DMAed copy */
-		for (i = (BFI_LL_TXF_ID_MAX - 1); i >= 0; i--)
-			if (txf_bmap & ((u64)1 << i)) {
-				p_stats -= sizeof(struct bfi_ll_stats_txf)/
-						sizeof(u64);
-				memcpy(&bna->stats.hw_stats->txf_stats[i],
-					p_stats,
-					sizeof(struct bfi_ll_stats_txf));
-			}
-
-		/* Populate the RXF stats from the firmware DMAed copy */
-		for (i = (BFI_LL_RXF_ID_MAX - 1); i >= 0; i--)
-			if (rxf_bmap & ((u64)1 << i)) {
-				p_stats -= sizeof(struct bfi_ll_stats_rxf)/
-						sizeof(u64);
-				memcpy(&bna->stats.hw_stats->rxf_stats[i],
-					p_stats,
-					sizeof(struct bfi_ll_stats_rxf));
-			}
-
-		bna_sw_stats_get(bna, bna->stats.sw_stats);
-		bnad_cb_stats_get(bna->bnad, BNA_CB_SUCCESS, &bna->stats);
-	} else
-		bnad_cb_stats_get(bna->bnad, BNA_CB_FAIL, &bna->stats);
-}
-
-static void
-bna_fw_stats_get(struct bna *bna)
-{
-	struct bfi_ll_stats_req ll_req;
-
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_STATS_GET_REQ, 0);
-	ll_req.stats_mask = htons(BFI_LL_STATS_ALL);
-
-	ll_req.rxf_id_mask[0] = htonl(bna->rx_mod.rxf_bmap[0]);
-	ll_req.rxf_id_mask[1] =	htonl(bna->rx_mod.rxf_bmap[1]);
-	ll_req.txf_id_mask[0] =	htonl(bna->tx_mod.txf_bmap[0]);
-	ll_req.txf_id_mask[1] =	htonl(bna->tx_mod.txf_bmap[1]);
-
-	ll_req.host_buffer.a32.addr_hi = bna->hw_stats_dma.msb;
-	ll_req.host_buffer.a32.addr_lo = bna->hw_stats_dma.lsb;
-
-	bna_mbox_qe_fill(&bna->mbox_qe, &ll_req, sizeof(ll_req),
-				bna_fw_cb_stats_get, bna);
-	bna_mbox_send(bna, &bna->mbox_qe);
-
-	bna->stats.rxf_bmap[0] = bna->rx_mod.rxf_bmap[0];
-	bna->stats.rxf_bmap[1] = bna->rx_mod.rxf_bmap[1];
-	bna->stats.txf_bmap[0] = bna->tx_mod.txf_bmap[0];
-	bna->stats.txf_bmap[1] = bna->tx_mod.txf_bmap[1];
-}
-
-void
-bna_stats_get(struct bna *bna)
-{
-	if (bna_device_status_get(&bna->device))
-		bna_fw_stats_get(bna);
-	else
-		bnad_cb_stats_get(bna->bnad, BNA_CB_FAIL, &bna->stats);
-}
-
-/* IB */
-static void
-bna_ib_coalescing_timeo_set(struct bna_ib *ib, u8 coalescing_timeo)
-{
-	ib->ib_config.coalescing_timeo = coalescing_timeo;
-
-	if (ib->start_count)
-		ib->door_bell.doorbell_ack = BNA_DOORBELL_IB_INT_ACK(
-				(u32)ib->ib_config.coalescing_timeo, 0);
-}
-
-/* RxF */
-void
-bna_rxf_adv_init(struct bna_rxf *rxf,
-		struct bna_rx *rx,
-		struct bna_rx_config *q_config)
-{
-	switch (q_config->rxp_type) {
-	case BNA_RXP_SINGLE:
-		/* No-op */
-		break;
-	case BNA_RXP_SLR:
-		rxf->ctrl_flags |= BNA_RXF_CF_SM_LG_RXQ;
-		break;
-	case BNA_RXP_HDS:
-		rxf->hds_cfg.hdr_type = q_config->hds_config.hdr_type;
-		rxf->hds_cfg.header_size =
-				q_config->hds_config.header_size;
-		rxf->forced_offset = 0;
-		break;
-	default:
-		break;
-	}
-
-	if (q_config->rss_status == BNA_STATUS_T_ENABLED) {
-		rxf->ctrl_flags |= BNA_RXF_CF_RSS_ENABLE;
-		rxf->rss_cfg.hash_type = q_config->rss_config.hash_type;
-		rxf->rss_cfg.hash_mask = q_config->rss_config.hash_mask;
-		memcpy(&rxf->rss_cfg.toeplitz_hash_key[0],
-			&q_config->rss_config.toeplitz_hash_key[0],
-			sizeof(rxf->rss_cfg.toeplitz_hash_key));
-	}
-}
-
-static void
-rxf_fltr_mbox_cmd(struct bna_rxf *rxf, u8 cmd, enum bna_status status)
-{
-	struct bfi_ll_rxf_req req;
-
-	bfi_h2i_set(req.mh, BFI_MC_LL, cmd, 0);
-
-	req.rxf_id = rxf->rxf_id;
-	req.enable = status;
-
-	bna_mbox_qe_fill(&rxf->mbox_qe, &req, sizeof(req),
-			rxf_cb_cam_fltr_mbox_cmd, rxf);
-
-	bna_mbox_send(rxf->rx->bna, &rxf->mbox_qe);
-}
-
-int
-rxf_process_packet_filter_ucast(struct bna_rxf *rxf)
-{
-	struct bna_mac *mac = NULL;
-	struct list_head *qe;
-
-	/* Add additional MAC entries */
-	if (!list_empty(&rxf->ucast_pending_add_q)) {
-		bfa_q_deq(&rxf->ucast_pending_add_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_ADD_REQ, mac);
-		list_add_tail(&mac->qe, &rxf->ucast_active_q);
-		return 1;
-	}
-
-	/* Delete MAC addresses previousely added */
-	if (!list_empty(&rxf->ucast_pending_del_q)) {
-		bfa_q_deq(&rxf->ucast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_DEL_REQ, mac);
-		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_process_packet_filter_promisc(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* Enable/disable promiscuous mode */
-	if (is_promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move promisc configuration from pending -> active */
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active |= BNA_RXMODE_PROMISC;
-
-		/* Disable VLAN filter to allow all VLANs */
-		__rxf_vlan_filter_set(rxf, BNA_STATUS_T_DISABLED);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ,
-				BNA_STATUS_T_ENABLED);
-		return 1;
-	} else if (is_promisc_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move promisc configuration from pending -> active */
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-		bna->rxf_promisc_id = BFI_MAX_RXF;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_process_packet_filter_allmulti(struct bna_rxf *rxf)
-{
-	/* Enable/disable allmulti mode */
-	if (is_allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move allmulti configuration from pending -> active */
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active |= BNA_RXMODE_ALLMULTI;
-
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_FILTER_REQ,
-				BNA_STATUS_T_ENABLED);
-		return 1;
-	} else if (is_allmulti_disable(rxf->rxmode_pending,
-					rxf->rxmode_pending_bitmask)) {
-		/* move allmulti configuration from pending -> active */
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_FILTER_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_clear_packet_filter_ucast(struct bna_rxf *rxf)
-{
-	struct bna_mac *mac = NULL;
-	struct list_head *qe;
-
-	/* 1. delete pending ucast entries */
-	if (!list_empty(&rxf->ucast_pending_del_q)) {
-		bfa_q_deq(&rxf->ucast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_DEL_REQ, mac);
-		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
-		return 1;
-	}
-
-	/* 2. clear active ucast entries; move them to pending_add_q */
-	if (!list_empty(&rxf->ucast_active_q)) {
-		bfa_q_deq(&rxf->ucast_active_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_DEL_REQ, mac);
-		list_add_tail(&mac->qe, &rxf->ucast_pending_add_q);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_clear_packet_filter_promisc(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* 6. Execute pending promisc mode disable command */
-	if (is_promisc_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move promisc configuration from pending -> active */
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-		bna->rxf_promisc_id = BFI_MAX_RXF;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	/* 7. Clear active promisc mode; move it to pending enable */
-	if (rxf->rxmode_active & BNA_RXMODE_PROMISC) {
-		/* move promisc configuration from active -> pending */
-		promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_clear_packet_filter_allmulti(struct bna_rxf *rxf)
-{
-	/* 10. Execute pending allmulti mode disable command */
-	if (is_allmulti_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move allmulti configuration from pending -> active */
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_FILTER_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	/* 11. Clear active allmulti mode; move it to pending enable */
-	if (rxf->rxmode_active & BNA_RXMODE_ALLMULTI) {
-		/* move allmulti configuration from active -> pending */
-		allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_FILTER_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-void
-rxf_reset_packet_filter_ucast(struct bna_rxf *rxf)
-{
-	struct list_head *qe;
-	struct bna_mac *mac;
-
-	/* 1. Move active ucast entries to pending_add_q */
-	while (!list_empty(&rxf->ucast_active_q)) {
-		bfa_q_deq(&rxf->ucast_active_q, &qe);
-		bfa_q_qe_init(qe);
-		list_add_tail(qe, &rxf->ucast_pending_add_q);
-	}
-
-	/* 2. Throw away delete pending ucast entries */
-	while (!list_empty(&rxf->ucast_pending_del_q)) {
-		bfa_q_deq(&rxf->ucast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
-	}
-}
-
-void
-rxf_reset_packet_filter_promisc(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* 6. Clear pending promisc mode disable */
-	if (is_promisc_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-		bna->rxf_promisc_id = BFI_MAX_RXF;
-	}
-
-	/* 7. Move promisc mode config from active -> pending */
-	if (rxf->rxmode_active & BNA_RXMODE_PROMISC) {
-		promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-	}
-
-}
-
-void
-rxf_reset_packet_filter_allmulti(struct bna_rxf *rxf)
-{
-	/* 10. Clear pending allmulti mode disable */
-	if (is_allmulti_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-	}
-
-	/* 11. Move allmulti mode config from active -> pending */
-	if (rxf->rxmode_active & BNA_RXMODE_ALLMULTI) {
-		allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-	}
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_promisc_enable(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-	int ret = 0;
-
-	/* There can not be any pending disable command */
-
-	/* Do nothing if pending enable or already enabled */
-	if (is_promisc_enable(rxf->rxmode_pending,
-			rxf->rxmode_pending_bitmask) ||
-			(rxf->rxmode_active & BNA_RXMODE_PROMISC)) {
-		/* Schedule enable */
-	} else {
-		/* Promisc mode should not be active in the system */
-		promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		bna->rxf_promisc_id = rxf->rxf_id;
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_promisc_disable(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-	int ret = 0;
-
-	/* There can not be any pending disable */
-
-	/* Turn off pending enable command , if any */
-	if (is_promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* Promisc mode should not be active */
-		/* system promisc state should be pending */
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		/* Remove the promisc state from the system */
-		bna->rxf_promisc_id = BFI_MAX_RXF;
-
-		/* Schedule disable */
-	} else if (rxf->rxmode_active & BNA_RXMODE_PROMISC) {
-		/* Promisc mode should be active in the system */
-		promisc_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		ret = 1;
-
-	/* Do nothing if already disabled */
-	} else {
-	}
-
-	return ret;
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_allmulti_enable(struct bna_rxf *rxf)
-{
-	int ret = 0;
-
-	/* There can not be any pending disable command */
-
-	/* Do nothing if pending enable or already enabled */
-	if (is_allmulti_enable(rxf->rxmode_pending,
-			rxf->rxmode_pending_bitmask) ||
-			(rxf->rxmode_active & BNA_RXMODE_ALLMULTI)) {
-		/* Schedule enable */
-	} else {
-		allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_allmulti_disable(struct bna_rxf *rxf)
-{
-	int ret = 0;
-
-	/* There can not be any pending disable */
-
-	/* Turn off pending enable command , if any */
-	if (is_allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* Allmulti mode should not be active */
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-
-	/* Schedule disable */
-	} else if (rxf->rxmode_active & BNA_RXMODE_ALLMULTI) {
-		allmulti_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/* RxF <- bnad */
-enum bna_cb_status
-bna_rx_mode_set(struct bna_rx *rx, enum bna_rxmode new_mode,
-		enum bna_rxmode bitmask,
-		void (*cbfn)(struct bnad *, struct bna_rx *,
-			     enum bna_cb_status))
-{
-	struct bna_rxf *rxf = &rx->rxf;
-	int need_hw_config = 0;
-
-	/* Process the commands */
-
-	if (is_promisc_enable(new_mode, bitmask)) {
-		/* If promisc mode is already enabled elsewhere in the system */
-		if ((rx->bna->rxf_promisc_id != BFI_MAX_RXF) &&
-			(rx->bna->rxf_promisc_id != rxf->rxf_id))
-			goto err_return;
-		if (rxf_promisc_enable(rxf))
-			need_hw_config = 1;
-	} else if (is_promisc_disable(new_mode, bitmask)) {
-		if (rxf_promisc_disable(rxf))
-			need_hw_config = 1;
-	}
-
-	if (is_allmulti_enable(new_mode, bitmask)) {
-		if (rxf_allmulti_enable(rxf))
-			need_hw_config = 1;
-	} else if (is_allmulti_disable(new_mode, bitmask)) {
-		if (rxf_allmulti_disable(rxf))
-			need_hw_config = 1;
-	}
-
-	/* Trigger h/w if needed */
-
-	if (need_hw_config) {
-		rxf->cam_fltr_cbfn = cbfn;
-		rxf->cam_fltr_cbarg = rx->bna->bnad;
-		bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-	} else if (cbfn)
-		(*cbfn)(rx->bna->bnad, rx, BNA_CB_SUCCESS);
-
-	return BNA_CB_SUCCESS;
-
-err_return:
-	return BNA_CB_FAIL;
-}
-
-void
-/* RxF <- bnad */
-bna_rx_vlanfilter_enable(struct bna_rx *rx)
-{
-	struct bna_rxf *rxf = &rx->rxf;
-
-	if (rxf->vlan_filter_status == BNA_STATUS_T_DISABLED) {
-		rxf->rxf_flags |= BNA_RXF_FL_VLAN_CONFIG_PENDING;
-		rxf->vlan_filter_status = BNA_STATUS_T_ENABLED;
-		bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-	}
-}
-
-/* Rx */
-
-/* Rx <- bnad */
-void
-bna_rx_coalescing_timeo_set(struct bna_rx *rx, int coalescing_timeo)
-{
-	struct bna_rxp *rxp;
-	struct list_head *qe;
-
-	list_for_each(qe, &rx->rxp_q) {
-		rxp = (struct bna_rxp *)qe;
-		rxp->cq.ccb->rx_coalescing_timeo = coalescing_timeo;
-		bna_ib_coalescing_timeo_set(rxp->cq.ib, coalescing_timeo);
-	}
-}
-
-/* Rx <- bnad */
-void
-bna_rx_dim_reconfig(struct bna *bna, const u32 vector[][BNA_BIAS_T_MAX])
-{
-	int i, j;
-
-	for (i = 0; i < BNA_LOAD_T_MAX; i++)
-		for (j = 0; j < BNA_BIAS_T_MAX; j++)
-			bna->rx_mod.dim_vector[i][j] = vector[i][j];
-}
-
-/* Rx <- bnad */
-void
-bna_rx_dim_update(struct bna_ccb *ccb)
-{
-	struct bna *bna = ccb->cq->rx->bna;
-	u32 load, bias;
-	u32 pkt_rt, small_rt, large_rt;
-	u8 coalescing_timeo;
-
-	if ((ccb->pkt_rate.small_pkt_cnt == 0) &&
-		(ccb->pkt_rate.large_pkt_cnt == 0))
-		return;
-
-	/* Arrive at preconfigured coalescing timeo value based on pkt rate */
-
-	small_rt = ccb->pkt_rate.small_pkt_cnt;
-	large_rt = ccb->pkt_rate.large_pkt_cnt;
-
-	pkt_rt = small_rt + large_rt;
-
-	if (pkt_rt < BNA_PKT_RATE_10K)
-		load = BNA_LOAD_T_LOW_4;
-	else if (pkt_rt < BNA_PKT_RATE_20K)
-		load = BNA_LOAD_T_LOW_3;
-	else if (pkt_rt < BNA_PKT_RATE_30K)
-		load = BNA_LOAD_T_LOW_2;
-	else if (pkt_rt < BNA_PKT_RATE_40K)
-		load = BNA_LOAD_T_LOW_1;
-	else if (pkt_rt < BNA_PKT_RATE_50K)
-		load = BNA_LOAD_T_HIGH_1;
-	else if (pkt_rt < BNA_PKT_RATE_60K)
-		load = BNA_LOAD_T_HIGH_2;
-	else if (pkt_rt < BNA_PKT_RATE_80K)
-		load = BNA_LOAD_T_HIGH_3;
-	else
-		load = BNA_LOAD_T_HIGH_4;
-
-	if (small_rt > (large_rt << 1))
-		bias = 0;
-	else
-		bias = 1;
-
-	ccb->pkt_rate.small_pkt_cnt = 0;
-	ccb->pkt_rate.large_pkt_cnt = 0;
-
-	coalescing_timeo = bna->rx_mod.dim_vector[load][bias];
-	ccb->rx_coalescing_timeo = coalescing_timeo;
-
-	/* Set it to IB */
-	bna_ib_coalescing_timeo_set(ccb->cq->ib, coalescing_timeo);
-}
-
-/* Tx */
-/* TX <- bnad */
-void
-bna_tx_coalescing_timeo_set(struct bna_tx *tx, int coalescing_timeo)
-{
-	struct bna_txq *txq;
-	struct list_head *qe;
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		bna_ib_coalescing_timeo_set(txq->ib, coalescing_timeo);
-	}
-}
-
-/*
- * Private data
- */
-
-struct bna_ritseg_pool_cfg {
-	u32	pool_size;
-	u32	pool_entry_size;
-};
-init_ritseg_pool(ritseg_pool_cfg);
-
-/*
- * Private functions
- */
-static void
-bna_ucam_mod_init(struct bna_ucam_mod *ucam_mod, struct bna *bna,
-		  struct bna_res_info *res_info)
-{
-	int i;
-
-	ucam_mod->ucmac = (struct bna_mac *)
-		res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.mdl[0].kva;
-
-	INIT_LIST_HEAD(&ucam_mod->free_q);
-	for (i = 0; i < BFI_MAX_UCMAC; i++) {
-		bfa_q_qe_init(&ucam_mod->ucmac[i].qe);
-		list_add_tail(&ucam_mod->ucmac[i].qe, &ucam_mod->free_q);
-	}
-
-	ucam_mod->bna = bna;
-}
-
-static void
-bna_ucam_mod_uninit(struct bna_ucam_mod *ucam_mod)
-{
-	struct list_head *qe;
-	int i = 0;
-
-	list_for_each(qe, &ucam_mod->free_q)
-		i++;
-
-	ucam_mod->bna = NULL;
-}
-
-static void
-bna_mcam_mod_init(struct bna_mcam_mod *mcam_mod, struct bna *bna,
-		  struct bna_res_info *res_info)
-{
-	int i;
-
-	mcam_mod->mcmac = (struct bna_mac *)
-		res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.mdl[0].kva;
-
-	INIT_LIST_HEAD(&mcam_mod->free_q);
-	for (i = 0; i < BFI_MAX_MCMAC; i++) {
-		bfa_q_qe_init(&mcam_mod->mcmac[i].qe);
-		list_add_tail(&mcam_mod->mcmac[i].qe, &mcam_mod->free_q);
-	}
-
-	mcam_mod->bna = bna;
-}
-
-static void
-bna_mcam_mod_uninit(struct bna_mcam_mod *mcam_mod)
-{
-	struct list_head *qe;
-	int i = 0;
-
-	list_for_each(qe, &mcam_mod->free_q)
-		i++;
-
-	mcam_mod->bna = NULL;
-}
-
-static void
-bna_rit_mod_init(struct bna_rit_mod *rit_mod,
-		struct bna_res_info *res_info)
-{
-	int i;
-	int j;
-	int count;
-	int offset;
-
-	rit_mod->rit = (struct bna_rit_entry *)
-		res_info[BNA_RES_MEM_T_RIT_ENTRY].res_u.mem_info.mdl[0].kva;
-	rit_mod->rit_segment = (struct bna_rit_segment *)
-		res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_u.mem_info.mdl[0].kva;
-
-	count = 0;
-	offset = 0;
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		INIT_LIST_HEAD(&rit_mod->rit_seg_pool[i]);
-		for (j = 0; j < ritseg_pool_cfg[i].pool_size; j++) {
-			bfa_q_qe_init(&rit_mod->rit_segment[count].qe);
-			rit_mod->rit_segment[count].max_rit_size =
-					ritseg_pool_cfg[i].pool_entry_size;
-			rit_mod->rit_segment[count].rit_offset = offset;
-			rit_mod->rit_segment[count].rit =
-					&rit_mod->rit[offset];
-			list_add_tail(&rit_mod->rit_segment[count].qe,
-				&rit_mod->rit_seg_pool[i]);
-			count++;
-			offset += ritseg_pool_cfg[i].pool_entry_size;
-		}
-	}
-}
-
-/*
- * Public functions
- */
-
-/* Called during probe(), before calling bna_init() */
-void
-bna_res_req(struct bna_res_info *res_info)
-{
-	bna_adv_res_req(res_info);
-
-	/* DMA memory for retrieving IOC attributes */
-	res_info[BNA_RES_MEM_T_ATTR].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
-	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.len =
-				ALIGN(bfa_nw_ioc_meminfo(), PAGE_SIZE);
-
-	/* DMA memory for index segment of an IB */
-	res_info[BNA_RES_MEM_T_IBIDX].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
-	res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.len =
-				BFI_IBIDX_SIZE * BFI_IBIDX_MAX_SEGSIZE;
-	res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.num = BFI_MAX_IB;
-
-	/* Virtual memory for IB objects - stored by IB module */
-	res_info[BNA_RES_MEM_T_IB_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_IB_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_IB_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_IB_ARRAY].res_u.mem_info.len =
-				BFI_MAX_IB * sizeof(struct bna_ib);
-
-	/* Virtual memory for intr objects - stored by IB module */
-	res_info[BNA_RES_MEM_T_INTR_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_INTR_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_INTR_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_INTR_ARRAY].res_u.mem_info.len =
-				BFI_MAX_IB * sizeof(struct bna_intr);
-
-	/* Virtual memory for idx_seg objects - stored by IB module */
-	res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_u.mem_info.len =
-			BFI_IBIDX_TOTAL_SEGS * sizeof(struct bna_ibidx_seg);
-
-	/* Virtual memory for Tx objects - stored by Tx module */
-	res_info[BNA_RES_MEM_T_TX_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_TX_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_TX_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_TX_ARRAY].res_u.mem_info.len =
-			BFI_MAX_TXQ * sizeof(struct bna_tx);
-
-	/* Virtual memory for TxQ - stored by Tx module */
-	res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.len =
-			BFI_MAX_TXQ * sizeof(struct bna_txq);
-
-	/* Virtual memory for Rx objects - stored by Rx module */
-	res_info[BNA_RES_MEM_T_RX_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RX_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RX_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RX_ARRAY].res_u.mem_info.len =
-			BFI_MAX_RXQ * sizeof(struct bna_rx);
-
-	/* Virtual memory for RxPath - stored by Rx module */
-	res_info[BNA_RES_MEM_T_RXP_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RXP_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RXP_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RXP_ARRAY].res_u.mem_info.len =
-			BFI_MAX_RXQ * sizeof(struct bna_rxp);
-
-	/* Virtual memory for RxQ - stored by Rx module */
-	res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.len =
-			BFI_MAX_RXQ * sizeof(struct bna_rxq);
-
-	/* Virtual memory for Unicast MAC address - stored by ucam module */
-	res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.len =
-			BFI_MAX_UCMAC * sizeof(struct bna_mac);
-
-	/* Virtual memory for Multicast MAC address - stored by mcam module */
-	res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.len =
-			BFI_MAX_MCMAC * sizeof(struct bna_mac);
-
-	/* Virtual memory for RIT entries */
-	res_info[BNA_RES_MEM_T_RIT_ENTRY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RIT_ENTRY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RIT_ENTRY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RIT_ENTRY].res_u.mem_info.len =
-			BFI_MAX_RIT_SIZE * sizeof(struct bna_rit_entry);
-
-	/* Virtual memory for RIT segment table */
-	res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_u.mem_info.len =
-			BFI_RIT_TOTAL_SEGS * sizeof(struct bna_rit_segment);
-
-	/* Interrupt resource for mailbox interrupt */
-	res_info[BNA_RES_INTR_T_MBOX].res_type = BNA_RES_T_INTR;
-	res_info[BNA_RES_INTR_T_MBOX].res_u.intr_info.intr_type =
-							BNA_INTR_T_MSIX;
-	res_info[BNA_RES_INTR_T_MBOX].res_u.intr_info.num = 1;
-}
-
-/* Called during probe() */
-void
-bna_init(struct bna *bna, struct bnad *bnad, struct bfa_pcidev *pcidev,
-		struct bna_res_info *res_info)
-{
-	bna->bnad = bnad;
-	bna->pcidev = *pcidev;
-
-	bna->stats.hw_stats = (struct bfi_ll_stats *)
-		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].kva;
-	bna->hw_stats_dma.msb =
-		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].dma.msb;
-	bna->hw_stats_dma.lsb =
-		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].dma.lsb;
-	bna->stats.sw_stats = (struct bna_sw_stats *)
-		res_info[BNA_RES_MEM_T_SWSTATS].res_u.mem_info.mdl[0].kva;
-
-	bna->regs.page_addr = bna->pcidev.pci_bar_kva +
-				reg_offset[bna->pcidev.pci_func].page_addr;
-	bna->regs.fn_int_status = bna->pcidev.pci_bar_kva +
-				reg_offset[bna->pcidev.pci_func].fn_int_status;
-	bna->regs.fn_int_mask = bna->pcidev.pci_bar_kva +
-				reg_offset[bna->pcidev.pci_func].fn_int_mask;
-
-	if (bna->pcidev.pci_func < 3)
-		bna->port_num = 0;
-	else
-		bna->port_num = 1;
-
-	/* Also initializes diag, cee, sfp, phy_port and mbox_mod */
-	bna_device_init(&bna->device, bna, res_info);
-
-	bna_port_init(&bna->port, bna);
-
-	bna_tx_mod_init(&bna->tx_mod, bna, res_info);
-
-	bna_rx_mod_init(&bna->rx_mod, bna, res_info);
-
-	bna_ib_mod_init(&bna->ib_mod, bna, res_info);
-
-	bna_rit_mod_init(&bna->rit_mod, res_info);
-
-	bna_ucam_mod_init(&bna->ucam_mod, bna, res_info);
-
-	bna_mcam_mod_init(&bna->mcam_mod, bna, res_info);
-
-	bna->rxf_promisc_id = BFI_MAX_RXF;
-
-	/* Mbox q element for posting stat request to f/w */
-	bfa_q_qe_init(&bna->mbox_qe.qe);
-}
-
-void
-bna_uninit(struct bna *bna)
-{
-	bna_mcam_mod_uninit(&bna->mcam_mod);
-
-	bna_ucam_mod_uninit(&bna->ucam_mod);
-
-	bna_ib_mod_uninit(&bna->ib_mod);
-
-	bna_rx_mod_uninit(&bna->rx_mod);
-
-	bna_tx_mod_uninit(&bna->tx_mod);
-
-	bna_port_uninit(&bna->port);
-
-	bna_device_uninit(&bna->device);
-
-	bna->bnad = NULL;
-}
-
-struct bna_mac *
-bna_ucam_mod_mac_get(struct bna_ucam_mod *ucam_mod)
-{
-	struct list_head *qe;
-
-	if (list_empty(&ucam_mod->free_q))
-		return NULL;
-
-	bfa_q_deq(&ucam_mod->free_q, &qe);
-
-	return (struct bna_mac *)qe;
-}
-
-void
-bna_ucam_mod_mac_put(struct bna_ucam_mod *ucam_mod, struct bna_mac *mac)
-{
-	list_add_tail(&mac->qe, &ucam_mod->free_q);
-}
-
-struct bna_mac *
-bna_mcam_mod_mac_get(struct bna_mcam_mod *mcam_mod)
-{
-	struct list_head *qe;
-
-	if (list_empty(&mcam_mod->free_q))
-		return NULL;
-
-	bfa_q_deq(&mcam_mod->free_q, &qe);
-
-	return (struct bna_mac *)qe;
-}
-
-void
-bna_mcam_mod_mac_put(struct bna_mcam_mod *mcam_mod, struct bna_mac *mac)
-{
-	list_add_tail(&mac->qe, &mcam_mod->free_q);
-}
-
-/**
- * Note: This should be called in the same locking context as the call to
- * bna_rit_mod_seg_get()
- */
-int
-bna_rit_mod_can_satisfy(struct bna_rit_mod *rit_mod, int seg_size)
-{
-	int i;
-
-	/* Select the pool for seg_size */
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		if (seg_size <= ritseg_pool_cfg[i].pool_entry_size)
-			break;
-	}
-
-	if (i == BFI_RIT_SEG_TOTAL_POOLS)
-		return 0;
-
-	if (list_empty(&rit_mod->rit_seg_pool[i]))
-		return 0;
-
-	return 1;
-}
-
-struct bna_rit_segment *
-bna_rit_mod_seg_get(struct bna_rit_mod *rit_mod, int seg_size)
-{
-	struct bna_rit_segment *seg;
-	struct list_head *qe;
-	int i;
-
-	/* Select the pool for seg_size */
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		if (seg_size <= ritseg_pool_cfg[i].pool_entry_size)
-			break;
-	}
-
-	if (i == BFI_RIT_SEG_TOTAL_POOLS)
-		return NULL;
-
-	if (list_empty(&rit_mod->rit_seg_pool[i]))
-		return NULL;
-
-	bfa_q_deq(&rit_mod->rit_seg_pool[i], &qe);
-	seg = (struct bna_rit_segment *)qe;
-	bfa_q_qe_init(&seg->qe);
-	seg->rit_size = seg_size;
-
-	return seg;
-}
-
-void
-bna_rit_mod_seg_put(struct bna_rit_mod *rit_mod,
-			struct bna_rit_segment *seg)
-{
-	int i;
-
-	/* Select the pool for seg->max_rit_size */
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		if (seg->max_rit_size == ritseg_pool_cfg[i].pool_entry_size)
-			break;
-	}
-
-	seg->rit_size = 0;
-	list_add_tail(&seg->qe, &rit_mod->rit_seg_pool[i]);
-}
diff --git a/drivers/net/bna/bna_hw.h b/drivers/net/bna/bna_hw.h
deleted file mode 100644
index cad233da843a..000000000000
--- a/drivers/net/bna/bna_hw.h
+++ /dev/null
@@ -1,1490 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * File for interrupt macros and functions
- */
-
-#ifndef __BNA_HW_H__
-#define __BNA_HW_H__
-
-#include "bfi_ctreg.h"
-
-/**
- *
- * SW imposed limits
- *
- */
-
-#ifndef BNA_BIOS_BUILD
-
-#define BFI_MAX_TXQ			64
-#define BFI_MAX_RXQ			64
-#define	BFI_MAX_RXF			64
-#define BFI_MAX_IB			128
-#define	BFI_MAX_RIT_SIZE		256
-#define	BFI_RSS_RIT_SIZE		64
-#define	BFI_NONRSS_RIT_SIZE		1
-#define BFI_MAX_UCMAC			256
-#define BFI_MAX_MCMAC			512
-#define BFI_IBIDX_SIZE			4
-#define BFI_MAX_VLAN			4095
-
-/**
- * There are 2 free IB index pools:
- *	pool1: 120 segments of 1 index each
- *	pool8: 1 segment of 8 indexes
- */
-#define BFI_IBIDX_POOL1_SIZE		116
-#define	BFI_IBIDX_POOL1_ENTRY_SIZE	1
-#define BFI_IBIDX_POOL2_SIZE		2
-#define	BFI_IBIDX_POOL2_ENTRY_SIZE	2
-#define	BFI_IBIDX_POOL8_SIZE		1
-#define	BFI_IBIDX_POOL8_ENTRY_SIZE	8
-#define	BFI_IBIDX_TOTAL_POOLS		3
-#define	BFI_IBIDX_TOTAL_SEGS		119 /* (POOL1 + POOL2 + POOL8)_SIZE */
-#define	BFI_IBIDX_MAX_SEGSIZE		8
-#define init_ibidx_pool(name)						\
-static struct bna_ibidx_pool name[BFI_IBIDX_TOTAL_POOLS] =		\
-{									\
-	{ BFI_IBIDX_POOL1_SIZE, BFI_IBIDX_POOL1_ENTRY_SIZE },		\
-	{ BFI_IBIDX_POOL2_SIZE, BFI_IBIDX_POOL2_ENTRY_SIZE },		\
-	{ BFI_IBIDX_POOL8_SIZE, BFI_IBIDX_POOL8_ENTRY_SIZE }		\
-}
-
-/**
- * There are 2 free RIT segment pools:
- *	Pool1: 192 segments of 1 RIT entry each
- *	Pool2: 1 segment of 64 RIT entry
- */
-#define BFI_RIT_SEG_POOL1_SIZE		192
-#define BFI_RIT_SEG_POOL1_ENTRY_SIZE	1
-#define BFI_RIT_SEG_POOLRSS_SIZE	1
-#define BFI_RIT_SEG_POOLRSS_ENTRY_SIZE	64
-#define BFI_RIT_SEG_TOTAL_POOLS		2
-#define BFI_RIT_TOTAL_SEGS		193 /* POOL1_SIZE + POOLRSS_SIZE */
-#define init_ritseg_pool(name)						\
-static struct bna_ritseg_pool_cfg name[BFI_RIT_SEG_TOTAL_POOLS] =	\
-{									\
-	{ BFI_RIT_SEG_POOL1_SIZE, BFI_RIT_SEG_POOL1_ENTRY_SIZE },	\
-	{ BFI_RIT_SEG_POOLRSS_SIZE, BFI_RIT_SEG_POOLRSS_ENTRY_SIZE }	\
-}
-
-#else /* BNA_BIOS_BUILD */
-
-#define BFI_MAX_TXQ			1
-#define BFI_MAX_RXQ			1
-#define	BFI_MAX_RXF			1
-#define BFI_MAX_IB			2
-#define	BFI_MAX_RIT_SIZE		2
-#define	BFI_RSS_RIT_SIZE		64
-#define	BFI_NONRSS_RIT_SIZE		1
-#define BFI_MAX_UCMAC			1
-#define BFI_MAX_MCMAC			8
-#define BFI_IBIDX_SIZE			4
-#define BFI_MAX_VLAN			4095
-/* There is one free pool: 2 segments of 1 index each */
-#define BFI_IBIDX_POOL1_SIZE		2
-#define	BFI_IBIDX_POOL1_ENTRY_SIZE	1
-#define	BFI_IBIDX_TOTAL_POOLS		1
-#define	BFI_IBIDX_TOTAL_SEGS		2 /* POOL1_SIZE */
-#define	BFI_IBIDX_MAX_SEGSIZE		1
-#define init_ibidx_pool(name)						\
-static struct bna_ibidx_pool name[BFI_IBIDX_TOTAL_POOLS] =		\
-{									\
-	{ BFI_IBIDX_POOL1_SIZE, BFI_IBIDX_POOL1_ENTRY_SIZE }		\
-}
-
-#define BFI_RIT_SEG_POOL1_SIZE		1
-#define BFI_RIT_SEG_POOL1_ENTRY_SIZE	1
-#define BFI_RIT_SEG_TOTAL_POOLS		1
-#define BFI_RIT_TOTAL_SEGS		1 /* POOL1_SIZE */
-#define init_ritseg_pool(name)						\
-static struct bna_ritseg_pool_cfg name[BFI_RIT_SEG_TOTAL_POOLS] =	\
-{									\
-	{ BFI_RIT_SEG_POOL1_SIZE, BFI_RIT_SEG_POOL1_ENTRY_SIZE }	\
-}
-
-#endif /* BNA_BIOS_BUILD */
-
-#define BFI_RSS_HASH_KEY_LEN		10
-
-#define BFI_COALESCING_TIMER_UNIT	5	/* 5us */
-#define BFI_MAX_COALESCING_TIMEO	0xFF	/* in 5us units */
-#define BFI_MAX_INTERPKT_COUNT		0xFF
-#define BFI_MAX_INTERPKT_TIMEO		0xF	/* in 0.5us units */
-#define BFI_TX_COALESCING_TIMEO		20	/* 20 * 5 = 100us */
-#define BFI_TX_INTERPKT_COUNT		32
-#define	BFI_RX_COALESCING_TIMEO		12	/* 12 * 5 = 60us */
-#define	BFI_RX_INTERPKT_COUNT		6	/* Pkt Cnt = 6 */
-#define	BFI_RX_INTERPKT_TIMEO		3	/* 3 * 0.5 = 1.5us */
-
-#define BFI_TXQ_WI_SIZE			64	/* bytes */
-#define BFI_RXQ_WI_SIZE			8	/* bytes */
-#define BFI_CQ_WI_SIZE			16	/* bytes */
-#define BFI_TX_MAX_WRR_QUOTA		0xFFF
-
-#define BFI_TX_MAX_VECTORS_PER_WI	4
-#define BFI_TX_MAX_VECTORS_PER_PKT	0xFF
-#define BFI_TX_MAX_DATA_PER_VECTOR	0xFFFF
-#define BFI_TX_MAX_DATA_PER_PKT		0xFFFFFF
-
-/* Small Q buffer size */
-#define BFI_SMALL_RXBUF_SIZE		128
-
-/* Defined separately since BFA_FLASH_DMA_BUF_SZ is in bfa_flash.c */
-#define BFI_FLASH_DMA_BUF_SZ		0x010000 /* 64K DMA */
-#define BFI_HW_STATS_SIZE		0x4000 /* 16K DMA */
-
-/**
- *
- * HW register offsets, macros
- *
- */
-
-/* DMA Block Register Host Window Start Address */
-#define DMA_BLK_REG_ADDR		0x00013000
-
-/* DMA Block Internal Registers */
-#define DMA_CTRL_REG0			(DMA_BLK_REG_ADDR + 0x000)
-#define DMA_CTRL_REG1			(DMA_BLK_REG_ADDR + 0x004)
-#define DMA_ERR_INT_STATUS		(DMA_BLK_REG_ADDR + 0x008)
-#define DMA_ERR_INT_ENABLE		(DMA_BLK_REG_ADDR + 0x00c)
-#define DMA_ERR_INT_STATUS_SET		(DMA_BLK_REG_ADDR + 0x010)
-
-/* APP Block Register Address Offset from BAR0 */
-#define APP_BLK_REG_ADDR		0x00014000
-
-/* Host Function Interrupt Mask Registers */
-#define HOSTFN0_INT_MASK		(APP_BLK_REG_ADDR + 0x004)
-#define HOSTFN1_INT_MASK		(APP_BLK_REG_ADDR + 0x104)
-#define HOSTFN2_INT_MASK		(APP_BLK_REG_ADDR + 0x304)
-#define HOSTFN3_INT_MASK		(APP_BLK_REG_ADDR + 0x404)
-
-/**
- * Host Function PCIe Error Registers
- * Duplicates "Correctable" & "Uncorrectable"
- * registers in PCIe Config space.
- */
-#define FN0_PCIE_ERR_REG		(APP_BLK_REG_ADDR + 0x014)
-#define FN1_PCIE_ERR_REG		(APP_BLK_REG_ADDR + 0x114)
-#define FN2_PCIE_ERR_REG		(APP_BLK_REG_ADDR + 0x314)
-#define FN3_PCIE_ERR_REG		(APP_BLK_REG_ADDR + 0x414)
-
-/* Host Function Error Type Status Registers */
-#define FN0_ERR_TYPE_STATUS_REG		(APP_BLK_REG_ADDR + 0x018)
-#define FN1_ERR_TYPE_STATUS_REG		(APP_BLK_REG_ADDR + 0x118)
-#define FN2_ERR_TYPE_STATUS_REG		(APP_BLK_REG_ADDR + 0x318)
-#define FN3_ERR_TYPE_STATUS_REG		(APP_BLK_REG_ADDR + 0x418)
-
-/* Host Function Error Type Mask Registers */
-#define FN0_ERR_TYPE_MSK_STATUS_REG	(APP_BLK_REG_ADDR + 0x01c)
-#define FN1_ERR_TYPE_MSK_STATUS_REG	(APP_BLK_REG_ADDR + 0x11c)
-#define FN2_ERR_TYPE_MSK_STATUS_REG	(APP_BLK_REG_ADDR + 0x31c)
-#define FN3_ERR_TYPE_MSK_STATUS_REG	(APP_BLK_REG_ADDR + 0x41c)
-
-/* Catapult Host Semaphore Status Registers (App block) */
-#define HOST_SEM_STS0_REG		(APP_BLK_REG_ADDR + 0x630)
-#define HOST_SEM_STS1_REG		(APP_BLK_REG_ADDR + 0x634)
-#define HOST_SEM_STS2_REG		(APP_BLK_REG_ADDR + 0x638)
-#define HOST_SEM_STS3_REG		(APP_BLK_REG_ADDR + 0x63c)
-#define HOST_SEM_STS4_REG		(APP_BLK_REG_ADDR + 0x640)
-#define HOST_SEM_STS5_REG		(APP_BLK_REG_ADDR + 0x644)
-#define HOST_SEM_STS6_REG		(APP_BLK_REG_ADDR + 0x648)
-#define HOST_SEM_STS7_REG		(APP_BLK_REG_ADDR + 0x64c)
-
-/* PCIe Misc Register */
-#define PCIE_MISC_REG			(APP_BLK_REG_ADDR + 0x200)
-
-/* Temp Sensor Control Registers */
-#define TEMPSENSE_CNTL_REG		(APP_BLK_REG_ADDR + 0x250)
-#define TEMPSENSE_STAT_REG		(APP_BLK_REG_ADDR + 0x254)
-
-/* APP Block local error registers */
-#define APP_LOCAL_ERR_STAT		(APP_BLK_REG_ADDR + 0x258)
-#define APP_LOCAL_ERR_MSK		(APP_BLK_REG_ADDR + 0x25c)
-
-/* PCIe Link Error registers */
-#define PCIE_LNK_ERR_STAT		(APP_BLK_REG_ADDR + 0x260)
-#define PCIE_LNK_ERR_MSK		(APP_BLK_REG_ADDR + 0x264)
-
-/**
- * FCoE/FIP Ethertype Register
- * 31:16 -- Chip wide value for FIP type
- * 15:0  -- Chip wide value for FCoE type
- */
-#define FCOE_FIP_ETH_TYPE		(APP_BLK_REG_ADDR + 0x280)
-
-/**
- * Reserved Ethertype Register
- * 31:16 -- Reserved
- * 15:0  -- Other ethertype
- */
-#define RESV_ETH_TYPE			(APP_BLK_REG_ADDR + 0x284)
-
-/**
- * Host Command Status Registers
- * Each set consists of 3 registers :
- * clear, set, cmd
- * 16 such register sets in all
- * See catapult_spec.pdf for detailed functionality
- * Put each type in a single macro accessed by _num ?
- */
-#define HOST_CMDSTS0_CLR_REG		(APP_BLK_REG_ADDR + 0x500)
-#define HOST_CMDSTS0_SET_REG		(APP_BLK_REG_ADDR + 0x504)
-#define HOST_CMDSTS0_REG		(APP_BLK_REG_ADDR + 0x508)
-#define HOST_CMDSTS1_CLR_REG		(APP_BLK_REG_ADDR + 0x510)
-#define HOST_CMDSTS1_SET_REG		(APP_BLK_REG_ADDR + 0x514)
-#define HOST_CMDSTS1_REG		(APP_BLK_REG_ADDR + 0x518)
-#define HOST_CMDSTS2_CLR_REG		(APP_BLK_REG_ADDR + 0x520)
-#define HOST_CMDSTS2_SET_REG		(APP_BLK_REG_ADDR + 0x524)
-#define HOST_CMDSTS2_REG		(APP_BLK_REG_ADDR + 0x528)
-#define HOST_CMDSTS3_CLR_REG		(APP_BLK_REG_ADDR + 0x530)
-#define HOST_CMDSTS3_SET_REG		(APP_BLK_REG_ADDR + 0x534)
-#define HOST_CMDSTS3_REG		(APP_BLK_REG_ADDR + 0x538)
-#define HOST_CMDSTS4_CLR_REG		(APP_BLK_REG_ADDR + 0x540)
-#define HOST_CMDSTS4_SET_REG		(APP_BLK_REG_ADDR + 0x544)
-#define HOST_CMDSTS4_REG		(APP_BLK_REG_ADDR + 0x548)
-#define HOST_CMDSTS5_CLR_REG		(APP_BLK_REG_ADDR + 0x550)
-#define HOST_CMDSTS5_SET_REG		(APP_BLK_REG_ADDR + 0x554)
-#define HOST_CMDSTS5_REG		(APP_BLK_REG_ADDR + 0x558)
-#define HOST_CMDSTS6_CLR_REG		(APP_BLK_REG_ADDR + 0x560)
-#define HOST_CMDSTS6_SET_REG		(APP_BLK_REG_ADDR + 0x564)
-#define HOST_CMDSTS6_REG		(APP_BLK_REG_ADDR + 0x568)
-#define HOST_CMDSTS7_CLR_REG		(APP_BLK_REG_ADDR + 0x570)
-#define HOST_CMDSTS7_SET_REG		(APP_BLK_REG_ADDR + 0x574)
-#define HOST_CMDSTS7_REG		(APP_BLK_REG_ADDR + 0x578)
-#define HOST_CMDSTS8_CLR_REG		(APP_BLK_REG_ADDR + 0x580)
-#define HOST_CMDSTS8_SET_REG		(APP_BLK_REG_ADDR + 0x584)
-#define HOST_CMDSTS8_REG		(APP_BLK_REG_ADDR + 0x588)
-#define HOST_CMDSTS9_CLR_REG		(APP_BLK_REG_ADDR + 0x590)
-#define HOST_CMDSTS9_SET_REG		(APP_BLK_REG_ADDR + 0x594)
-#define HOST_CMDSTS9_REG		(APP_BLK_REG_ADDR + 0x598)
-#define HOST_CMDSTS10_CLR_REG		(APP_BLK_REG_ADDR + 0x5A0)
-#define HOST_CMDSTS10_SET_REG		(APP_BLK_REG_ADDR + 0x5A4)
-#define HOST_CMDSTS10_REG		(APP_BLK_REG_ADDR + 0x5A8)
-#define HOST_CMDSTS11_CLR_REG		(APP_BLK_REG_ADDR + 0x5B0)
-#define HOST_CMDSTS11_SET_REG		(APP_BLK_REG_ADDR + 0x5B4)
-#define HOST_CMDSTS11_REG		(APP_BLK_REG_ADDR + 0x5B8)
-#define HOST_CMDSTS12_CLR_REG		(APP_BLK_REG_ADDR + 0x5C0)
-#define HOST_CMDSTS12_SET_REG		(APP_BLK_REG_ADDR + 0x5C4)
-#define HOST_CMDSTS12_REG		(APP_BLK_REG_ADDR + 0x5C8)
-#define HOST_CMDSTS13_CLR_REG		(APP_BLK_REG_ADDR + 0x5D0)
-#define HOST_CMDSTS13_SET_REG		(APP_BLK_REG_ADDR + 0x5D4)
-#define HOST_CMDSTS13_REG		(APP_BLK_REG_ADDR + 0x5D8)
-#define HOST_CMDSTS14_CLR_REG		(APP_BLK_REG_ADDR + 0x5E0)
-#define HOST_CMDSTS14_SET_REG		(APP_BLK_REG_ADDR + 0x5E4)
-#define HOST_CMDSTS14_REG		(APP_BLK_REG_ADDR + 0x5E8)
-#define HOST_CMDSTS15_CLR_REG		(APP_BLK_REG_ADDR + 0x5F0)
-#define HOST_CMDSTS15_SET_REG		(APP_BLK_REG_ADDR + 0x5F4)
-#define HOST_CMDSTS15_REG		(APP_BLK_REG_ADDR + 0x5F8)
-
-/**
- * LPU0 Block Register Address Offset from BAR0
- * Range 0x18000 - 0x18033
- */
-#define LPU0_BLK_REG_ADDR		0x00018000
-
-/**
- * LPU0 Registers
- * Should they be directly used from host,
- * except for diagnostics ?
- * CTL_REG : Control register
- * CMD_REG : Triggers exec. of cmd. in
- *           Mailbox memory
- */
-#define LPU0_MBOX_CTL_REG		(LPU0_BLK_REG_ADDR + 0x000)
-#define LPU0_MBOX_CMD_REG		(LPU0_BLK_REG_ADDR + 0x004)
-#define LPU0_MBOX_LINK_0REG		(LPU0_BLK_REG_ADDR + 0x008)
-#define LPU1_MBOX_LINK_0REG		(LPU0_BLK_REG_ADDR + 0x00c)
-#define LPU0_MBOX_STATUS_0REG		(LPU0_BLK_REG_ADDR + 0x010)
-#define LPU1_MBOX_STATUS_0REG		(LPU0_BLK_REG_ADDR + 0x014)
-#define LPU0_ERR_STATUS_REG		(LPU0_BLK_REG_ADDR + 0x018)
-#define LPU0_ERR_SET_REG		(LPU0_BLK_REG_ADDR + 0x020)
-
-/**
- * LPU1 Block Register Address Offset from BAR0
- * Range 0x18400 - 0x18433
- */
-#define LPU1_BLK_REG_ADDR		0x00018400
-
-/**
- * LPU1 Registers
- * Same as LPU0 registers above
- */
-#define LPU1_MBOX_CTL_REG		(LPU1_BLK_REG_ADDR + 0x000)
-#define LPU1_MBOX_CMD_REG		(LPU1_BLK_REG_ADDR + 0x004)
-#define LPU0_MBOX_LINK_1REG		(LPU1_BLK_REG_ADDR + 0x008)
-#define LPU1_MBOX_LINK_1REG		(LPU1_BLK_REG_ADDR + 0x00c)
-#define LPU0_MBOX_STATUS_1REG		(LPU1_BLK_REG_ADDR + 0x010)
-#define LPU1_MBOX_STATUS_1REG		(LPU1_BLK_REG_ADDR + 0x014)
-#define LPU1_ERR_STATUS_REG		(LPU1_BLK_REG_ADDR + 0x018)
-#define LPU1_ERR_SET_REG		(LPU1_BLK_REG_ADDR + 0x020)
-
-/**
- * PSS Block Register Address Offset from BAR0
- * Range 0x18800 - 0x188DB
- */
-#define PSS_BLK_REG_ADDR		0x00018800
-
-/**
- * PSS Registers
- * For details, see catapult_spec.pdf
- * ERR_STATUS_REG : Indicates error in PSS module
- * RAM_ERR_STATUS_REG : Indicates RAM module that detected error
- */
-#define ERR_STATUS_SET			(PSS_BLK_REG_ADDR + 0x018)
-#define PSS_RAM_ERR_STATUS_REG		(PSS_BLK_REG_ADDR + 0x01C)
-
-/**
- * PSS Semaphore Lock Registers, total 16
- * First read when unlocked returns 0,
- * and is set to 1, atomically.
- * Subsequent reads returns 1.
- * To clear set the value to 0.
- * Range : 0x20 to 0x5c
- */
-#define PSS_SEM_LOCK_REG(_num)		\
-	(PSS_BLK_REG_ADDR + 0x020 + ((_num) << 2))
-
-/**
- * PSS Semaphore Status Registers,
- * corresponding to the lock registers above
- */
-#define PSS_SEM_STATUS_REG(_num)		\
-	(PSS_BLK_REG_ADDR + 0x060 + ((_num) << 2))
-
-/**
- * Catapult CPQ Registers
- * Defines for Mailbox Registers
- * Used to send mailbox commands to firmware from
- * host. The data part is written to the MBox
- * memory, registers are used to indicate that
- * a commnad is resident in memory.
- *
- * Note : LPU0<->LPU1 mailboxes are not listed here
- */
-#define CPQ_BLK_REG_ADDR		0x00019000
-
-#define HOSTFN0_LPU0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x130)
-#define HOSTFN0_LPU1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x134)
-#define LPU0_HOSTFN0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x138)
-#define LPU1_HOSTFN0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x13C)
-
-#define HOSTFN1_LPU0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x140)
-#define HOSTFN1_LPU1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x144)
-#define LPU0_HOSTFN1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x148)
-#define LPU1_HOSTFN1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x14C)
-
-#define HOSTFN2_LPU0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x170)
-#define HOSTFN2_LPU1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x174)
-#define LPU0_HOSTFN2_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x178)
-#define LPU1_HOSTFN2_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x17C)
-
-#define HOSTFN3_LPU0_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x180)
-#define HOSTFN3_LPU1_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x184)
-#define LPU0_HOSTFN3_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x188)
-#define LPU1_HOSTFN3_MBOX1_CMD_STAT	(CPQ_BLK_REG_ADDR + 0x18C)
-
-/* Host Function Force Parity Error Registers */
-#define HOSTFN0_LPU_FORCE_PERR		(CPQ_BLK_REG_ADDR + 0x120)
-#define HOSTFN1_LPU_FORCE_PERR		(CPQ_BLK_REG_ADDR + 0x124)
-#define HOSTFN2_LPU_FORCE_PERR		(CPQ_BLK_REG_ADDR + 0x128)
-#define HOSTFN3_LPU_FORCE_PERR		(CPQ_BLK_REG_ADDR + 0x12C)
-
-/* LL Port[0|1] Halt Mask Registers */
-#define LL_HALT_MSK_P0			(CPQ_BLK_REG_ADDR + 0x1A0)
-#define LL_HALT_MSK_P1			(CPQ_BLK_REG_ADDR + 0x1B0)
-
-/* LL Port[0|1] Error Mask Registers */
-#define LL_ERR_MSK_P0			(CPQ_BLK_REG_ADDR + 0x1D0)
-#define LL_ERR_MSK_P1			(CPQ_BLK_REG_ADDR + 0x1D4)
-
-/* EMC FLI (Flash Controller) Block Register Address Offset from BAR0 */
-#define FLI_BLK_REG_ADDR		0x0001D000
-
-/* EMC FLI Registers */
-#define FLI_CMD_REG			(FLI_BLK_REG_ADDR + 0x000)
-#define FLI_ADDR_REG			(FLI_BLK_REG_ADDR + 0x004)
-#define FLI_CTL_REG			(FLI_BLK_REG_ADDR + 0x008)
-#define FLI_WRDATA_REG			(FLI_BLK_REG_ADDR + 0x00C)
-#define FLI_RDDATA_REG			(FLI_BLK_REG_ADDR + 0x010)
-#define FLI_DEV_STATUS_REG		(FLI_BLK_REG_ADDR + 0x014)
-#define FLI_SIG_WD_REG			(FLI_BLK_REG_ADDR + 0x018)
-
-/**
- * RO register
- * 31:16 -- Vendor Id
- * 15:0  -- Device Id
- */
-#define FLI_DEV_VENDOR_REG		(FLI_BLK_REG_ADDR + 0x01C)
-#define FLI_ERR_STATUS_REG		(FLI_BLK_REG_ADDR + 0x020)
-
-/**
- * RAD (RxAdm) Block Register Address Offset from BAR0
- * RAD0 Range : 0x20000 - 0x203FF
- * RAD1 Range : 0x20400 - 0x207FF
- */
-#define RAD0_BLK_REG_ADDR		0x00020000
-#define RAD1_BLK_REG_ADDR		0x00020400
-
-/* RAD0 Registers */
-#define RAD0_CTL_REG			(RAD0_BLK_REG_ADDR + 0x000)
-#define RAD0_PE_PARM_REG		(RAD0_BLK_REG_ADDR + 0x004)
-#define RAD0_BCN_REG			(RAD0_BLK_REG_ADDR + 0x008)
-
-/* Default function ID register */
-#define RAD0_DEFAULT_REG		(RAD0_BLK_REG_ADDR + 0x00C)
-
-/* Default promiscuous ID register */
-#define RAD0_PROMISC_REG		(RAD0_BLK_REG_ADDR + 0x010)
-
-#define RAD0_BCNQ_REG			(RAD0_BLK_REG_ADDR + 0x014)
-
-/*
- * This register selects 1 of 8 PM Q's using
- * VLAN pri, for non-BCN packets without a VLAN tag
- */
-#define RAD0_DEFAULTQ_REG		(RAD0_BLK_REG_ADDR + 0x018)
-
-#define RAD0_ERR_STS			(RAD0_BLK_REG_ADDR + 0x01C)
-#define RAD0_SET_ERR_STS		(RAD0_BLK_REG_ADDR + 0x020)
-#define RAD0_ERR_INT_EN			(RAD0_BLK_REG_ADDR + 0x024)
-#define RAD0_FIRST_ERR			(RAD0_BLK_REG_ADDR + 0x028)
-#define RAD0_FORCE_ERR			(RAD0_BLK_REG_ADDR + 0x02C)
-
-#define RAD0_IF_RCVD			(RAD0_BLK_REG_ADDR + 0x030)
-#define RAD0_IF_RCVD_OCTETS_HIGH	(RAD0_BLK_REG_ADDR + 0x034)
-#define RAD0_IF_RCVD_OCTETS_LOW		(RAD0_BLK_REG_ADDR + 0x038)
-#define RAD0_IF_RCVD_VLAN		(RAD0_BLK_REG_ADDR + 0x03C)
-#define RAD0_IF_RCVD_UCAST		(RAD0_BLK_REG_ADDR + 0x040)
-#define RAD0_IF_RCVD_UCAST_OCTETS_HIGH	(RAD0_BLK_REG_ADDR + 0x044)
-#define RAD0_IF_RCVD_UCAST_OCTETS_LOW   (RAD0_BLK_REG_ADDR + 0x048)
-#define RAD0_IF_RCVD_UCAST_VLAN		(RAD0_BLK_REG_ADDR + 0x04C)
-#define RAD0_IF_RCVD_MCAST		(RAD0_BLK_REG_ADDR + 0x050)
-#define RAD0_IF_RCVD_MCAST_OCTETS_HIGH  (RAD0_BLK_REG_ADDR + 0x054)
-#define RAD0_IF_RCVD_MCAST_OCTETS_LOW   (RAD0_BLK_REG_ADDR + 0x058)
-#define RAD0_IF_RCVD_MCAST_VLAN		(RAD0_BLK_REG_ADDR + 0x05C)
-#define RAD0_IF_RCVD_BCAST		(RAD0_BLK_REG_ADDR + 0x060)
-#define RAD0_IF_RCVD_BCAST_OCTETS_HIGH  (RAD0_BLK_REG_ADDR + 0x064)
-#define RAD0_IF_RCVD_BCAST_OCTETS_LOW   (RAD0_BLK_REG_ADDR + 0x068)
-#define RAD0_IF_RCVD_BCAST_VLAN		(RAD0_BLK_REG_ADDR + 0x06C)
-#define RAD0_DROPPED_FRAMES		(RAD0_BLK_REG_ADDR + 0x070)
-
-#define RAD0_MAC_MAN_1H			(RAD0_BLK_REG_ADDR + 0x080)
-#define RAD0_MAC_MAN_1L			(RAD0_BLK_REG_ADDR + 0x084)
-#define RAD0_MAC_MAN_2H			(RAD0_BLK_REG_ADDR + 0x088)
-#define RAD0_MAC_MAN_2L			(RAD0_BLK_REG_ADDR + 0x08C)
-#define RAD0_MAC_MAN_3H			(RAD0_BLK_REG_ADDR + 0x090)
-#define RAD0_MAC_MAN_3L			(RAD0_BLK_REG_ADDR + 0x094)
-#define RAD0_MAC_MAN_4H			(RAD0_BLK_REG_ADDR + 0x098)
-#define RAD0_MAC_MAN_4L			(RAD0_BLK_REG_ADDR + 0x09C)
-
-#define RAD0_LAST4_IP			(RAD0_BLK_REG_ADDR + 0x100)
-
-/* RAD1 Registers */
-#define RAD1_CTL_REG			(RAD1_BLK_REG_ADDR + 0x000)
-#define RAD1_PE_PARM_REG		(RAD1_BLK_REG_ADDR + 0x004)
-#define RAD1_BCN_REG			(RAD1_BLK_REG_ADDR + 0x008)
-
-/* Default function ID register */
-#define RAD1_DEFAULT_REG		(RAD1_BLK_REG_ADDR + 0x00C)
-
-/* Promiscuous function ID register */
-#define RAD1_PROMISC_REG		(RAD1_BLK_REG_ADDR + 0x010)
-
-#define RAD1_BCNQ_REG			(RAD1_BLK_REG_ADDR + 0x014)
-
-/*
- * This register selects 1 of 8 PM Q's using
- * VLAN pri, for non-BCN packets without a VLAN tag
- */
-#define RAD1_DEFAULTQ_REG		(RAD1_BLK_REG_ADDR + 0x018)
-
-#define RAD1_ERR_STS			(RAD1_BLK_REG_ADDR + 0x01C)
-#define RAD1_SET_ERR_STS		(RAD1_BLK_REG_ADDR + 0x020)
-#define RAD1_ERR_INT_EN			(RAD1_BLK_REG_ADDR + 0x024)
-
-/**
- * TXA Block Register Address Offset from BAR0
- * TXA0 Range : 0x21000 - 0x213FF
- * TXA1 Range : 0x21400 - 0x217FF
- */
-#define TXA0_BLK_REG_ADDR		0x00021000
-#define TXA1_BLK_REG_ADDR		0x00021400
-
-/* TXA Registers */
-#define TXA0_CTRL_REG			(TXA0_BLK_REG_ADDR + 0x000)
-#define TXA1_CTRL_REG			(TXA1_BLK_REG_ADDR + 0x000)
-
-/**
- * TSO Sequence # Registers (RO)
- * Total 8 (for 8 queues)
- * Holds the last seq.# for TSO frames
- * See catapult_spec.pdf for more details
- */
-#define TXA0_TSO_TCP_SEQ_REG(_num)		\
-	(TXA0_BLK_REG_ADDR + 0x020 + ((_num) << 2))
-
-#define TXA1_TSO_TCP_SEQ_REG(_num)		\
-	(TXA1_BLK_REG_ADDR + 0x020 + ((_num) << 2))
-
-/**
- * TSO IP ID # Registers (RO)
- * Total 8 (for 8 queues)
- * Holds the last IP ID for TSO frames
- * See catapult_spec.pdf for more details
- */
-#define TXA0_TSO_IP_INFO_REG(_num)		\
-	(TXA0_BLK_REG_ADDR + 0x040 + ((_num) << 2))
-
-#define TXA1_TSO_IP_INFO_REG(_num)		\
-	(TXA1_BLK_REG_ADDR + 0x040 + ((_num) << 2))
-
-/**
- * RXA Block Register Address Offset from BAR0
- * RXA0 Range : 0x21800 - 0x21BFF
- * RXA1 Range : 0x21C00 - 0x21FFF
- */
-#define RXA0_BLK_REG_ADDR		0x00021800
-#define RXA1_BLK_REG_ADDR		0x00021C00
-
-/* RXA Registers */
-#define RXA0_CTL_REG			(RXA0_BLK_REG_ADDR + 0x040)
-#define RXA1_CTL_REG			(RXA1_BLK_REG_ADDR + 0x040)
-
-/**
- * PPLB Block Register Address Offset from BAR0
- * PPLB0 Range : 0x22000 - 0x223FF
- * PPLB1 Range : 0x22400 - 0x227FF
- */
-#define PLB0_BLK_REG_ADDR		0x00022000
-#define PLB1_BLK_REG_ADDR		0x00022400
-
-/**
- * PLB Registers
- * Holds RL timer used time stamps in RLT tagged frames
- */
-#define PLB0_ECM_TIMER_REG		(PLB0_BLK_REG_ADDR + 0x05C)
-#define PLB1_ECM_TIMER_REG		(PLB1_BLK_REG_ADDR + 0x05C)
-
-/* Controls the rate-limiter on each of the priority class */
-#define PLB0_RL_CTL			(PLB0_BLK_REG_ADDR + 0x060)
-#define PLB1_RL_CTL			(PLB1_BLK_REG_ADDR + 0x060)
-
-/**
- * Max byte register, total 8, 0-7
- * see catapult_spec.pdf for details
- */
-#define PLB0_RL_MAX_BC(_num)			\
-	(PLB0_BLK_REG_ADDR + 0x064 + ((_num) << 2))
-#define PLB1_RL_MAX_BC(_num)			\
-	(PLB1_BLK_REG_ADDR + 0x064 + ((_num) << 2))
-
-/**
- * RL Time Unit Register for priority 0-7
- * 4 bits per priority
- * (2^rl_unit)*1us is the actual time period
- */
-#define PLB0_RL_TU_PRIO			(PLB0_BLK_REG_ADDR + 0x084)
-#define PLB1_RL_TU_PRIO			(PLB1_BLK_REG_ADDR + 0x084)
-
-/**
- * RL byte count register,
- * bytes transmitted in (rl_unit*1)us time period
- * 1 per priority, 8 in all, 0-7.
- */
-#define PLB0_RL_BYTE_CNT(_num)			\
-	(PLB0_BLK_REG_ADDR + 0x088 + ((_num) << 2))
-#define PLB1_RL_BYTE_CNT(_num)			\
-	(PLB1_BLK_REG_ADDR + 0x088 + ((_num) << 2))
-
-/**
- * RL Min factor register
- * 2 bits per priority,
- * 4 factors possible: 1, 0.5, 0.25, 0
- * 2'b00 - 0; 2'b01 - 0.25; 2'b10 - 0.5; 2'b11 - 1
- */
-#define PLB0_RL_MIN_REG			(PLB0_BLK_REG_ADDR + 0x0A8)
-#define PLB1_RL_MIN_REG			(PLB1_BLK_REG_ADDR + 0x0A8)
-
-/**
- * RL Max factor register
- * 2 bits per priority,
- * 4 factors possible: 1, 0.5, 0.25, 0
- * 2'b00 - 0; 2'b01 - 0.25; 2'b10 - 0.5; 2'b11 - 1
- */
-#define PLB0_RL_MAX_REG			(PLB0_BLK_REG_ADDR + 0x0AC)
-#define PLB1_RL_MAX_REG			(PLB1_BLK_REG_ADDR + 0x0AC)
-
-/* MAC SERDES Address Paging register */
-#define PLB0_EMS_ADD_REG		(PLB0_BLK_REG_ADDR + 0xD0)
-#define PLB1_EMS_ADD_REG		(PLB1_BLK_REG_ADDR + 0xD0)
-
-/* LL EMS Registers */
-#define LL_EMS0_BLK_REG_ADDR		0x00026800
-#define LL_EMS1_BLK_REG_ADDR		0x00026C00
-
-/**
- * BPC Block Register Address Offset from BAR0
- * BPC0 Range : 0x23000 - 0x233FF
- * BPC1 Range : 0x23400 - 0x237FF
- */
-#define BPC0_BLK_REG_ADDR		0x00023000
-#define BPC1_BLK_REG_ADDR		0x00023400
-
-/**
- * PMM Block Register Address Offset from BAR0
- * PMM0 Range : 0x23800 - 0x23BFF
- * PMM1 Range : 0x23C00 - 0x23FFF
- */
-#define PMM0_BLK_REG_ADDR		0x00023800
-#define PMM1_BLK_REG_ADDR		0x00023C00
-
-/**
- * HQM Block Register Address Offset from BAR0
- * HQM0 Range : 0x24000 - 0x243FF
- * HQM1 Range : 0x24400 - 0x247FF
- */
-#define HQM0_BLK_REG_ADDR		0x00024000
-#define HQM1_BLK_REG_ADDR		0x00024400
-
-/**
- * HQM Control Register
- * Controls some aspects of IB
- * See catapult_spec.pdf for details
- */
-#define HQM0_CTL_REG			(HQM0_BLK_REG_ADDR + 0x000)
-#define HQM1_CTL_REG			(HQM1_BLK_REG_ADDR + 0x000)
-
-/**
- * HQM Stop Q Semaphore Registers.
- * Only one Queue resource can be stopped at
- * any given time. This register controls access
- * to the single stop Q resource.
- * See catapult_spec.pdf for details
- */
-#define HQM0_RXQ_STOP_SEM		(HQM0_BLK_REG_ADDR + 0x028)
-#define HQM0_TXQ_STOP_SEM		(HQM0_BLK_REG_ADDR + 0x02C)
-#define HQM1_RXQ_STOP_SEM		(HQM1_BLK_REG_ADDR + 0x028)
-#define HQM1_TXQ_STOP_SEM		(HQM1_BLK_REG_ADDR + 0x02C)
-
-/**
- * LUT Block Register Address Offset from BAR0
- * LUT0 Range : 0x25800 - 0x25BFF
- * LUT1 Range : 0x25C00 - 0x25FFF
- */
-#define LUT0_BLK_REG_ADDR		0x00025800
-#define LUT1_BLK_REG_ADDR		0x00025C00
-
-/**
- * LUT Registers
- * See catapult_spec.pdf for details
- */
-#define LUT0_ERR_STS			(LUT0_BLK_REG_ADDR + 0x000)
-#define LUT1_ERR_STS			(LUT1_BLK_REG_ADDR + 0x000)
-#define LUT0_SET_ERR_STS		(LUT0_BLK_REG_ADDR + 0x004)
-#define LUT1_SET_ERR_STS		(LUT1_BLK_REG_ADDR + 0x004)
-
-/**
- * TRC (Debug/Trace) Register Offset from BAR0
- * Range : 0x26000 -- 0x263FFF
- */
-#define TRC_BLK_REG_ADDR		0x00026000
-
-/**
- * TRC Registers
- * See catapult_spec.pdf for details of each
- */
-#define TRC_CTL_REG			(TRC_BLK_REG_ADDR + 0x000)
-#define TRC_MODS_REG			(TRC_BLK_REG_ADDR + 0x004)
-#define TRC_TRGC_REG			(TRC_BLK_REG_ADDR + 0x008)
-#define TRC_CNT1_REG			(TRC_BLK_REG_ADDR + 0x010)
-#define TRC_CNT2_REG			(TRC_BLK_REG_ADDR + 0x014)
-#define TRC_NXTS_REG			(TRC_BLK_REG_ADDR + 0x018)
-#define TRC_DIRR_REG			(TRC_BLK_REG_ADDR + 0x01C)
-
-/**
- * TRC Trigger match filters, total 10
- * Determines the trigger condition
- */
-#define TRC_TRGM_REG(_num)		\
-	(TRC_BLK_REG_ADDR + 0x040 + ((_num) << 2))
-
-/**
- * TRC Next State filters, total 10
- * Determines the next state conditions
- */
-#define TRC_NXTM_REG(_num)		\
-	(TRC_BLK_REG_ADDR + 0x080 + ((_num) << 2))
-
-/**
- * TRC Store Match filters, total 10
- * Determines the store conditions
- */
-#define TRC_STRM_REG(_num)		\
-	(TRC_BLK_REG_ADDR + 0x0C0 + ((_num) << 2))
-
-/* DOORBELLS ACCESS */
-
-/**
- * Catapult doorbells
- * Each doorbell-queue set has
- * 1 RxQ, 1 TxQ, 2 IBs in that order
- * Size of each entry in 32 bytes, even though only 1 word
- * is used. For Non-VM case each doorbell-q set is
- * separated by 128 bytes, for VM case it is separated
- * by 4K bytes
- * Non VM case Range : 0x38000 - 0x39FFF
- * VM case Range     : 0x100000 - 0x11FFFF
- * The range applies to both HQMs
- */
-#define HQM_DOORBELL_BLK_BASE_ADDR	0x00038000
-#define HQM_DOORBELL_VM_BLK_BASE_ADDR	0x00100000
-
-/* MEMORY ACCESS */
-
-/**
- * Catapult H/W Block Memory Access Address
- * To the host a memory space of 32K (page) is visible
- * at a time. The address range is from 0x08000 to 0x0FFFF
- */
-#define HW_BLK_HOST_MEM_ADDR		0x08000
-
-/**
- * Catapult LUT Memory Access Page Numbers
- * Range : LUT0 0xa0-0xa1
- *         LUT1 0xa2-0xa3
- */
-#define LUT0_MEM_BLK_BASE_PG_NUM	0x000000A0
-#define LUT1_MEM_BLK_BASE_PG_NUM	0x000000A2
-
-/**
- * Catapult RxFn Database Memory Block Base Offset
- *
- * The Rx function database exists in LUT block.
- * In PCIe space this is accessible as a 256x32
- * bit block. Each entry in this database is 4
- * (4 byte) words. Max. entries is 64.
- * Address of an entry corresponding to a function
- * = base_addr + (function_no. * 16)
- */
-#define RX_FNDB_RAM_BASE_OFFSET		0x0000B400
-
-/**
- * Catapult TxFn Database Memory Block Base Offset Address
- *
- * The Tx function database exists in LUT block.
- * In PCIe space this is accessible as a 64x32
- * bit block. Each entry in this database is 1
- * (4 byte) word. Max. entries is 64.
- * Address of an entry corresponding to a function
- * = base_addr + (function_no. * 4)
- */
-#define TX_FNDB_RAM_BASE_OFFSET		0x0000B800
-
-/**
- * Catapult Unicast CAM Base Offset Address
- *
- * Exists in LUT memory space.
- * Shared by both the LL & FCoE driver.
- * Size is 256x48 bits; mapped to PCIe space
- * 512x32 bit blocks. For each address, bits
- * are written in the order : [47:32] and then
- * [31:0].
- */
-#define UCAST_CAM_BASE_OFFSET		0x0000A800
-
-/**
- * Catapult Unicast RAM Base Offset Address
- *
- * Exists in LUT memory space.
- * Shared by both the LL & FCoE driver.
- * Size is 256x9 bits.
- */
-#define UCAST_RAM_BASE_OFFSET		0x0000B000
-
-/**
- * Catapult Mulicast CAM Base Offset Address
- *
- * Exists in LUT memory space.
- * Shared by both the LL & FCoE driver.
- * Size is 256x48 bits; mapped to PCIe space
- * 512x32 bit blocks. For each address, bits
- * are written in the order : [47:32] and then
- * [31:0].
- */
-#define MCAST_CAM_BASE_OFFSET		0x0000A000
-
-/**
- * Catapult VLAN RAM Base Offset Address
- *
- * Exists in LUT memory space.
- * Size is 4096x66 bits; mapped to PCIe space as
- * 8192x32 bit blocks.
- * All the 4K entries are within the address range
- * 0x0000 to 0x8000, so in the first LUT page.
- */
-#define VLAN_RAM_BASE_OFFSET		0x00000000
-
-/**
- * Catapult Tx Stats RAM Base Offset Address
- *
- * Exists in LUT memory space.
- * Size is 1024x33 bits;
- * Each Tx function has 64 bytes of space
- */
-#define TX_STATS_RAM_BASE_OFFSET	0x00009000
-
-/**
- * Catapult Rx Stats RAM Base Offset Address
- *
- * Exists in LUT memory space.
- * Size is 1024x33 bits;
- * Each Rx function has 64 bytes of space
- */
-#define RX_STATS_RAM_BASE_OFFSET	0x00008000
-
-/* Catapult RXA Memory Access Page Numbers */
-#define RXA0_MEM_BLK_BASE_PG_NUM	0x0000008C
-#define RXA1_MEM_BLK_BASE_PG_NUM	0x0000008D
-
-/**
- * Catapult Multicast Vector Table Base Offset Address
- *
- * Exists in RxA memory space.
- * Organized as 512x65 bit block.
- * However for each entry 16 bytes allocated (power of 2)
- * Total size 512*16 bytes.
- * There are two logical divisions, 256 entries each :
- * a) Entries 0x00 to 0xff (256) -- Approx. MVT
- *    Offset 0x000 to 0xFFF
- * b) Entries 0x100 to 0x1ff (256) -- Exact MVT
- *    Offsets 0x1000 to 0x1FFF
- */
-#define MCAST_APPROX_MVT_BASE_OFFSET	0x00000000
-#define MCAST_EXACT_MVT_BASE_OFFSET	0x00001000
-
-/**
- * Catapult RxQ Translate Table (RIT) Base Offset Address
- *
- * Exists in RxA memory space
- * Total no. of entries 64
- * Each entry is 1 (4 byte) word.
- * 31:12 -- Reserved
- * 11:0  -- Two 6 bit RxQ Ids
- */
-#define FUNCTION_TO_RXQ_TRANSLATE	0x00002000
-
-/* Catapult RxAdm (RAD) Memory Access Page Numbers */
-#define RAD0_MEM_BLK_BASE_PG_NUM	0x00000086
-#define RAD1_MEM_BLK_BASE_PG_NUM	0x00000087
-
-/**
- * Catapult RSS Table Base Offset Address
- *
- * Exists in RAD memory space.
- * Each entry is 352 bits, but aligned on
- * 64 byte (512 bit) boundary. Accessed
- * 4 byte words, the whole entry can be
- * broken into 11 word accesses.
- */
-#define RSS_TABLE_BASE_OFFSET		0x00000800
-
-/**
- * Catapult CPQ Block Page Number
- * This value is written to the page number registers
- * to access the memory associated with the mailboxes.
- */
-#define CPQ_BLK_PG_NUM			0x00000005
-
-/**
- * Clarification :
- * LL functions are 2 & 3; can HostFn0/HostFn1
- * <-> LPU0/LPU1 memories be used ?
- */
-/**
- * Catapult HostFn0/HostFn1 to LPU0/LPU1 Mbox memory
- * Per catapult_spec.pdf, the offset of the mbox
- * memory is in the register space at an offset of 0x200
- */
-#define CPQ_BLK_REG_MBOX_ADDR		(CPQ_BLK_REG_ADDR + 0x200)
-
-#define HOSTFN_LPU_MBOX			(CPQ_BLK_REG_MBOX_ADDR + 0x000)
-
-/* Catapult LPU0/LPU1 to HostFn0/HostFn1 Mbox memory */
-#define LPU_HOSTFN_MBOX			(CPQ_BLK_REG_MBOX_ADDR + 0x080)
-
-/**
- * Catapult HQM Block Page Number
- * This is written to the page number register for
- * the appropriate function to access the memory
- * associated with HQM
- */
-#define HQM0_BLK_PG_NUM			0x00000096
-#define HQM1_BLK_PG_NUM			0x00000097
-
-/**
- * Note that TxQ and RxQ entries are interlaced
- * the HQM memory, i.e RXQ0, TXQ0, RXQ1, TXQ1.. etc.
- */
-
-#define HQM_RXTX_Q_RAM_BASE_OFFSET	0x00004000
-
-/**
- * CQ Memory
- * Exists in HQM Memory space
- * Each entry is 16 (4 byte) words of which
- * only 12 words are used for configuration
- * Total 64 entries per HQM memory space
- */
-#define HQM_CQ_RAM_BASE_OFFSET		0x00006000
-
-/**
- * Interrupt Block (IB) Memory
- * Exists in HQM Memory space
- * Each entry is 8 (4 byte) words of which
- * only 5 words are used for configuration
- * Total 128 entries per HQM memory space
- */
-#define HQM_IB_RAM_BASE_OFFSET		0x00001000
-
-/**
- * Index Table (IT) Memory
- * Exists in HQM Memory space
- * Each entry is 1 (4 byte) word which
- * is used for configuration
- * Total 128 entries per HQM memory space
- */
-#define HQM_INDX_TBL_RAM_BASE_OFFSET	0x00002000
-
-/**
- * PSS Block Memory Page Number
- * This is written to the appropriate page number
- * register to access the CPU memory.
- * Also known as the PSS secondary memory (SMEM).
- * Range : 0x180 to 0x1CF
- * See catapult_spec.pdf for details
- */
-#define PSS_BLK_PG_NUM			0x00000180
-
-/**
- * Offsets of different instances of PSS SMEM
- * 2.5M of continuous 1T memory space : 2 blocks
- * of 1M each (32 pages each, page=32KB) and 4 smaller
- * blocks of 128K each (4 pages each, page=32KB)
- * PSS_LMEM_INST0 is used for firmware download
- */
-#define PSS_LMEM_INST0			0x00000000
-#define PSS_LMEM_INST1			0x00100000
-#define PSS_LMEM_INST2			0x00200000
-#define PSS_LMEM_INST3			0x00220000
-#define PSS_LMEM_INST4			0x00240000
-#define PSS_LMEM_INST5			0x00260000
-
-#define BNA_PCI_REG_CT_ADDRSZ		(0x40000)
-
-#define BNA_GET_PAGE_NUM(_base_page, _offset)   \
-	((_base_page) + ((_offset) >> 15))
-
-#define BNA_GET_PAGE_OFFSET(_offset)    \
-	((_offset) & 0x7fff)
-
-#define BNA_GET_MEM_BASE_ADDR(_bar0, _base_offset)	\
-	((_bar0) + HW_BLK_HOST_MEM_ADDR		\
-	  + BNA_GET_PAGE_OFFSET((_base_offset)))
-
-#define BNA_GET_VLAN_MEM_ENTRY_ADDR(_bar0, _fn_id, _vlan_id)\
-	(_bar0 + (HW_BLK_HOST_MEM_ADDR)  \
-	+ (BNA_GET_PAGE_OFFSET(VLAN_RAM_BASE_OFFSET))	\
-	+ (((_fn_id) & 0x3f) << 9)	  \
-	+ (((_vlan_id) & 0xfe0) >> 3))
-
-/**
- *
- *  Interrupt related bits, flags and macros
- *
- */
-
-#define __LPU02HOST_MBOX0_STATUS_BITS 0x00100000
-#define __LPU12HOST_MBOX0_STATUS_BITS 0x00200000
-#define __LPU02HOST_MBOX1_STATUS_BITS 0x00400000
-#define __LPU12HOST_MBOX1_STATUS_BITS 0x00800000
-
-#define __LPU02HOST_MBOX0_MASK_BITS	0x00100000
-#define __LPU12HOST_MBOX0_MASK_BITS	0x00200000
-#define __LPU02HOST_MBOX1_MASK_BITS	0x00400000
-#define __LPU12HOST_MBOX1_MASK_BITS	0x00800000
-
-#define __LPU2HOST_MBOX_MASK_BITS			 \
-	(__LPU02HOST_MBOX0_MASK_BITS | __LPU02HOST_MBOX1_MASK_BITS |	\
-	  __LPU12HOST_MBOX0_MASK_BITS | __LPU12HOST_MBOX1_MASK_BITS)
-
-#define __LPU2HOST_IB_STATUS_BITS	0x0000ffff
-
-#define BNA_IS_LPU0_MBOX_INTR(_intr_status) \
-	((_intr_status) & (__LPU02HOST_MBOX0_STATUS_BITS | \
-			__LPU02HOST_MBOX1_STATUS_BITS))
-
-#define BNA_IS_LPU1_MBOX_INTR(_intr_status) \
-	((_intr_status) & (__LPU12HOST_MBOX0_STATUS_BITS | \
-		__LPU12HOST_MBOX1_STATUS_BITS))
-
-#define BNA_IS_MBOX_INTR(_intr_status)		\
-	((_intr_status) &			\
-	(__LPU02HOST_MBOX0_STATUS_BITS |	\
-	 __LPU02HOST_MBOX1_STATUS_BITS |	\
-	 __LPU12HOST_MBOX0_STATUS_BITS |	\
-	 __LPU12HOST_MBOX1_STATUS_BITS))
-
-#define __EMC_ERROR_STATUS_BITS		0x00010000
-#define __LPU0_ERROR_STATUS_BITS	0x00020000
-#define __LPU1_ERROR_STATUS_BITS	0x00040000
-#define __PSS_ERROR_STATUS_BITS		0x00080000
-
-#define __HALT_STATUS_BITS		0x01000000
-
-#define __EMC_ERROR_MASK_BITS		0x00010000
-#define __LPU0_ERROR_MASK_BITS		0x00020000
-#define __LPU1_ERROR_MASK_BITS		0x00040000
-#define __PSS_ERROR_MASK_BITS		0x00080000
-
-#define __HALT_MASK_BITS		0x01000000
-
-#define __ERROR_MASK_BITS		\
-	(__EMC_ERROR_MASK_BITS | __LPU0_ERROR_MASK_BITS | \
-	  __LPU1_ERROR_MASK_BITS | __PSS_ERROR_MASK_BITS | \
-	  __HALT_MASK_BITS)
-
-#define BNA_IS_ERR_INTR(_intr_status)	\
-	((_intr_status) &		\
-	(__EMC_ERROR_STATUS_BITS |	\
-	 __LPU0_ERROR_STATUS_BITS |	\
-	 __LPU1_ERROR_STATUS_BITS |	\
-	 __PSS_ERROR_STATUS_BITS  |	\
-	 __HALT_STATUS_BITS))
-
-#define BNA_IS_MBOX_ERR_INTR(_intr_status)	\
-	(BNA_IS_MBOX_INTR((_intr_status)) |	\
-	 BNA_IS_ERR_INTR((_intr_status)))
-
-#define BNA_IS_INTX_DATA_INTR(_intr_status)	\
-	((_intr_status) & __LPU2HOST_IB_STATUS_BITS)
-
-#define BNA_INTR_STATUS_MBOX_CLR(_intr_status)			\
-do {								\
-	(_intr_status) &= ~(__LPU02HOST_MBOX0_STATUS_BITS |	\
-			__LPU02HOST_MBOX1_STATUS_BITS |		\
-			__LPU12HOST_MBOX0_STATUS_BITS |		\
-			__LPU12HOST_MBOX1_STATUS_BITS);		\
-} while (0)
-
-#define BNA_INTR_STATUS_ERR_CLR(_intr_status)		\
-do {							\
-	(_intr_status) &= ~(__EMC_ERROR_STATUS_BITS |	\
-		__LPU0_ERROR_STATUS_BITS |		\
-		__LPU1_ERROR_STATUS_BITS |		\
-		__PSS_ERROR_STATUS_BITS  |		\
-		__HALT_STATUS_BITS);			\
-} while (0)
-
-#define bna_intx_disable(_bna, _cur_mask)		\
-{							\
-	(_cur_mask) = readl((_bna)->regs.fn_int_mask);\
-	writel(0xffffffff, (_bna)->regs.fn_int_mask);\
-}
-
-#define bna_intx_enable(bna, new_mask)			\
-	writel((new_mask), (bna)->regs.fn_int_mask)
-
-#define bna_mbox_intr_disable(bna)		\
-	writel((readl((bna)->regs.fn_int_mask) | \
-	     (__LPU2HOST_MBOX_MASK_BITS | __ERROR_MASK_BITS)), \
-	     (bna)->regs.fn_int_mask)
-
-#define bna_mbox_intr_enable(bna)		\
-	writel((readl((bna)->regs.fn_int_mask) & \
-	     ~(__LPU2HOST_MBOX_MASK_BITS | __ERROR_MASK_BITS)), \
-	     (bna)->regs.fn_int_mask)
-
-#define bna_intr_status_get(_bna, _status)				\
-{									\
-	(_status) = readl((_bna)->regs.fn_int_status);		\
-	if ((_status)) {						\
-		writel((_status) & ~(__LPU02HOST_MBOX0_STATUS_BITS |\
-					  __LPU02HOST_MBOX1_STATUS_BITS |\
-					  __LPU12HOST_MBOX0_STATUS_BITS |\
-					  __LPU12HOST_MBOX1_STATUS_BITS), \
-			      (_bna)->regs.fn_int_status);\
-	}								\
-}
-
-#define bna_intr_status_get_no_clr(_bna, _status)		\
-	(_status) = readl((_bna)->regs.fn_int_status)
-
-#define bna_intr_mask_get(bna, mask)		\
-	(*mask) = readl((bna)->regs.fn_int_mask)
-
-#define bna_intr_ack(bna, intr_bmap)		\
-	writel((intr_bmap), (bna)->regs.fn_int_status)
-
-#define bna_ib_intx_disable(bna, ib_id)		\
-	writel(readl((bna)->regs.fn_int_mask) | \
-	    (1 << (ib_id)), \
-	    (bna)->regs.fn_int_mask)
-
-#define bna_ib_intx_enable(bna, ib_id)		\
-	writel(readl((bna)->regs.fn_int_mask) & \
-	    ~(1 << (ib_id)), \
-	    (bna)->regs.fn_int_mask)
-
-#define bna_mbox_msix_idx_set(_device) \
-do {\
-	writel(((_device)->vector & 0x000001FF), \
-		(_device)->bna->pcidev.pci_bar_kva + \
-		reg_offset[(_device)->bna->pcidev.pci_func].msix_idx);\
-} while (0)
-
-/**
- *
- * TxQ, RxQ, CQ related bits, offsets, macros
- *
- */
-
-#define	BNA_Q_IDLE_STATE	0x00008001
-
-#define BNA_GET_DOORBELL_BASE_ADDR(_bar0)	\
-	((_bar0) + HQM_DOORBELL_BLK_BASE_ADDR)
-
-#define BNA_GET_DOORBELL_ENTRY_OFFSET(_entry)		\
-	((HQM_DOORBELL_BLK_BASE_ADDR)		\
-	+ (_entry << 7))
-
-#define BNA_DOORBELL_IB_INT_ACK(_timeout, _events) \
-		(0x80000000 | ((_timeout) << 16) | (_events))
-
-#define BNA_DOORBELL_IB_INT_DISABLE		(0x40000000)
-
-/* TxQ Entry Opcodes */
-#define BNA_TXQ_WI_SEND			(0x402)	/* Single Frame Transmission */
-#define BNA_TXQ_WI_SEND_LSO		(0x403)	/* Multi-Frame Transmission */
-#define BNA_TXQ_WI_EXTENSION		(0x104)	/* Extension WI */
-
-/* TxQ Entry Control Flags */
-#define BNA_TXQ_WI_CF_FCOE_CRC		(1 << 8)
-#define BNA_TXQ_WI_CF_IPID_MODE		(1 << 5)
-#define BNA_TXQ_WI_CF_INS_PRIO		(1 << 4)
-#define BNA_TXQ_WI_CF_INS_VLAN		(1 << 3)
-#define BNA_TXQ_WI_CF_UDP_CKSUM		(1 << 2)
-#define BNA_TXQ_WI_CF_TCP_CKSUM		(1 << 1)
-#define BNA_TXQ_WI_CF_IP_CKSUM		(1 << 0)
-
-#define BNA_TXQ_WI_L4_HDR_N_OFFSET(_hdr_size, _offset) \
-		(((_hdr_size) << 10) | ((_offset) & 0x3FF))
-
-/*
- * Completion Q defines
- */
-/* CQ Entry Flags */
-#define	BNA_CQ_EF_MAC_ERROR	(1 <<  0)
-#define	BNA_CQ_EF_FCS_ERROR	(1 <<  1)
-#define	BNA_CQ_EF_TOO_LONG	(1 <<  2)
-#define	BNA_CQ_EF_FC_CRC_OK	(1 <<  3)
-
-#define	BNA_CQ_EF_RSVD1		(1 <<  4)
-#define	BNA_CQ_EF_L4_CKSUM_OK	(1 <<  5)
-#define	BNA_CQ_EF_L3_CKSUM_OK	(1 <<  6)
-#define	BNA_CQ_EF_HDS_HEADER	(1 <<  7)
-
-#define	BNA_CQ_EF_UDP		(1 <<  8)
-#define	BNA_CQ_EF_TCP		(1 <<  9)
-#define	BNA_CQ_EF_IP_OPTIONS	(1 << 10)
-#define	BNA_CQ_EF_IPV6		(1 << 11)
-
-#define	BNA_CQ_EF_IPV4		(1 << 12)
-#define	BNA_CQ_EF_VLAN		(1 << 13)
-#define	BNA_CQ_EF_RSS		(1 << 14)
-#define	BNA_CQ_EF_RSVD2		(1 << 15)
-
-#define	BNA_CQ_EF_MCAST_MATCH   (1 << 16)
-#define	BNA_CQ_EF_MCAST		(1 << 17)
-#define BNA_CQ_EF_BCAST		(1 << 18)
-#define	BNA_CQ_EF_REMOTE	(1 << 19)
-
-#define	BNA_CQ_EF_LOCAL		(1 << 20)
-
-/**
- *
- * Data structures
- *
- */
-
-enum txf_flags {
-	BFI_TXF_CF_ENABLE		= 1 << 0,
-	BFI_TXF_CF_VLAN_FILTER		= 1 << 8,
-	BFI_TXF_CF_VLAN_ADMIT		= 1 << 9,
-	BFI_TXF_CF_VLAN_INSERT		= 1 << 10,
-	BFI_TXF_CF_RSVD1		= 1 << 11,
-	BFI_TXF_CF_MAC_SA_CHECK		= 1 << 12,
-	BFI_TXF_CF_VLAN_WI_BASED	= 1 << 13,
-	BFI_TXF_CF_VSWITCH_MCAST	= 1 << 14,
-	BFI_TXF_CF_VSWITCH_UCAST	= 1 << 15,
-	BFI_TXF_CF_RSVD2		= 0x7F << 1
-};
-
-enum ib_flags {
-	BFI_IB_CF_MASTER_ENABLE		= (1 << 0),
-	BFI_IB_CF_MSIX_MODE		= (1 << 1),
-	BFI_IB_CF_COALESCING_MODE	= (1 << 2),
-	BFI_IB_CF_INTER_PKT_ENABLE	= (1 << 3),
-	BFI_IB_CF_INT_ENABLE		= (1 << 4),
-	BFI_IB_CF_INTER_PKT_DMA		= (1 << 5),
-	BFI_IB_CF_ACK_PENDING		= (1 << 6),
-	BFI_IB_CF_RESERVED1		= (1 << 7)
-};
-
-enum rss_hash_type {
-	BFI_RSS_T_V4_TCP		= (1 << 11),
-	BFI_RSS_T_V4_IP			= (1 << 10),
-	BFI_RSS_T_V6_TCP		= (1 <<  9),
-	BFI_RSS_T_V6_IP			= (1 <<  8)
-};
-enum hds_header_type {
-	BNA_HDS_T_V4_TCP	= (1 << 11),
-	BNA_HDS_T_V4_UDP	= (1 << 10),
-	BNA_HDS_T_V6_TCP	= (1 << 9),
-	BNA_HDS_T_V6_UDP	= (1 << 8),
-	BNA_HDS_FORCED		= (1 << 7),
-};
-enum rxf_flags {
-	BNA_RXF_CF_SM_LG_RXQ			= (1 << 15),
-	BNA_RXF_CF_DEFAULT_VLAN			= (1 << 14),
-	BNA_RXF_CF_DEFAULT_FUNCTION_ENABLE	= (1 << 13),
-	BNA_RXF_CF_VLAN_STRIP			= (1 << 12),
-	BNA_RXF_CF_RSS_ENABLE			= (1 <<  8)
-};
-struct bna_chip_regs_offset {
-	u32 page_addr;
-	u32 fn_int_status;
-	u32 fn_int_mask;
-	u32 msix_idx;
-};
-
-struct bna_chip_regs {
-	void __iomem *page_addr;
-	void __iomem *fn_int_status;
-	void __iomem *fn_int_mask;
-};
-
-struct bna_txq_mem {
-	u32 pg_tbl_addr_lo;
-	u32 pg_tbl_addr_hi;
-	u32 cur_q_entry_lo;
-	u32 cur_q_entry_hi;
-	u32 reserved1;
-	u32 reserved2;
-	u32 pg_cnt_n_prd_ptr;	/* 31:16->total page count */
-					/* 15:0 ->producer pointer (index?) */
-	u32 entry_n_pg_size;	/* 31:16->entry size */
-					/* 15:0 ->page size */
-	u32 int_blk_n_cns_ptr;	/* 31:24->Int Blk Id;  */
-					/* 23:16->Int Blk Offset */
-					/* 15:0 ->consumer pointer(index?) */
-	u32 cns_ptr2_n_q_state;	/* 31:16->cons. ptr 2; 15:0-> Q state */
-	u32 nxt_qid_n_fid_n_pri;	/* 17:10->next */
-					/* QId;9:3->FID;2:0->Priority */
-	u32 wvc_n_cquota_n_rquota; /* 31:24->WI Vector Count; */
-					/* 23:12->Cfg Quota; */
-					/* 11:0 ->Run Quota */
-	u32 reserved3[4];
-};
-
-struct bna_rxq_mem {
-	u32 pg_tbl_addr_lo;
-	u32 pg_tbl_addr_hi;
-	u32 cur_q_entry_lo;
-	u32 cur_q_entry_hi;
-	u32 reserved1;
-	u32 reserved2;
-	u32 pg_cnt_n_prd_ptr;	/* 31:16->total page count */
-					/* 15:0 ->producer pointer (index?) */
-	u32 entry_n_pg_size;	/* 31:16->entry size */
-					/* 15:0 ->page size */
-	u32 sg_n_cq_n_cns_ptr;	/* 31:28->reserved; 27:24->sg count */
-					/* 23:16->CQ; */
-					/* 15:0->consumer pointer(index?) */
-	u32 buf_sz_n_q_state;	/* 31:16->buffer size; 15:0-> Q state */
-	u32 next_qid;		/* 17:10->next QId */
-	u32 reserved3;
-	u32 reserved4[4];
-};
-
-struct bna_rxtx_q_mem {
-	struct bna_rxq_mem rxq;
-	struct bna_txq_mem txq;
-};
-
-struct bna_cq_mem {
-	u32 pg_tbl_addr_lo;
-	u32 pg_tbl_addr_hi;
-	u32 cur_q_entry_lo;
-	u32 cur_q_entry_hi;
-
-	u32 reserved1;
-	u32 reserved2;
-	u32 pg_cnt_n_prd_ptr;	/* 31:16->total page count */
-					/* 15:0 ->producer pointer (index?) */
-	u32 entry_n_pg_size;	/* 31:16->entry size */
-					/* 15:0 ->page size */
-	u32 int_blk_n_cns_ptr;	/* 31:24->Int Blk Id; */
-					/* 23:16->Int Blk Offset */
-					/* 15:0 ->consumer pointer(index?) */
-	u32 q_state;		/* 31:16->reserved; 15:0-> Q state */
-	u32 reserved3[2];
-	u32 reserved4[4];
-};
-
-struct bna_ib_blk_mem {
-	u32 host_addr_lo;
-	u32 host_addr_hi;
-	u32 clsc_n_ctrl_n_msix;	/* 31:24->coalescing; */
-					/* 23:16->coalescing cfg; */
-					/* 15:8 ->control; */
-					/* 7:0 ->msix; */
-	u32 ipkt_n_ent_n_idxof;
-	u32 ipkt_cnt_cfg_n_unacked;
-
-	u32 reserved[3];
-};
-
-struct bna_idx_tbl_mem {
-	u32 idx;	  /* !< 31:16->res;15:0->idx; */
-};
-
-struct bna_doorbell_qset {
-	u32 rxq[0x20 >> 2];
-	u32 txq[0x20 >> 2];
-	u32 ib0[0x20 >> 2];
-	u32 ib1[0x20 >> 2];
-};
-
-struct bna_rx_fndb_ram {
-	u32 rss_prop;
-	u32 size_routing_props;
-	u32 rit_hds_mcastq;
-	u32 control_flags;
-};
-
-struct bna_tx_fndb_ram {
-	u32 vlan_n_ctrl_flags;
-};
-
-/**
- * @brief
- *  Structure which maps to RxFn Indirection Table (RIT)
- *  Size : 1 word
- *  See catapult_spec.pdf, RxA for details
- */
-struct bna_rit_mem {
-	u32 rxq_ids;	/* !< 31:12->res;11:0->two 6 bit RxQ Ids */
-};
-
-/**
- * @brief
- *  Structure which maps to RSS Table entry
- *  Size : 16 words
- *  See catapult_spec.pdf, RAD for details
- */
-struct bna_rss_mem {
-	/*
-	 * 31:12-> res
-	 * 11:8 -> protocol type
-	 *  7:0 -> hash index
-	 */
-	u32 type_n_hash;
-	u32 hash_key[10];  /* !< 40 byte Toeplitz hash key */
-	u32 reserved[5];
-};
-
-/* TxQ Vector (a.k.a. Tx-Buffer Descriptor) */
-struct bna_dma_addr {
-	u32		msb;
-	u32		lsb;
-};
-
-struct bna_txq_wi_vector {
-	u16		reserved;
-	u16		length;		/* Only 14 LSB are valid */
-	struct bna_dma_addr host_addr; /* Tx-Buf DMA addr */
-};
-
-typedef u16 bna_txq_wi_opcode_t;
-
-typedef u16 bna_txq_wi_ctrl_flag_t;
-
-/**
- *  TxQ Entry Structure
- *
- *  BEWARE:  Load values into this structure with correct endianess.
- */
-struct bna_txq_entry {
-	union {
-		struct {
-			u8 reserved;
-			u8 num_vectors;	/* number of vectors present */
-			bna_txq_wi_opcode_t opcode; /* Either */
-						    /* BNA_TXQ_WI_SEND or */
-						    /* BNA_TXQ_WI_SEND_LSO */
-			bna_txq_wi_ctrl_flag_t flags; /* OR of all the flags */
-			u16 l4_hdr_size_n_offset;
-			u16 vlan_tag;
-			u16 lso_mss;	/* Only 14 LSB are valid */
-			u32 frame_length;	/* Only 24 LSB are valid */
-		} wi;
-
-		struct {
-			u16 reserved;
-			bna_txq_wi_opcode_t opcode; /* Must be */
-						    /* BNA_TXQ_WI_EXTENSION */
-			u32 reserved2[3];	/* Place holder for */
-						/* removed vector (12 bytes) */
-		} wi_ext;
-	} hdr;
-	struct bna_txq_wi_vector vector[4];
-};
-#define wi_hdr		hdr.wi
-#define wi_ext_hdr  hdr.wi_ext
-
-/* RxQ Entry Structure */
-struct bna_rxq_entry {		/* Rx-Buffer */
-	struct bna_dma_addr host_addr; /* Rx-Buffer DMA address */
-};
-
-typedef u32 bna_cq_e_flag_t;
-
-/* CQ Entry Structure */
-struct bna_cq_entry {
-	bna_cq_e_flag_t flags;
-	u16 vlan_tag;
-	u16 length;
-	u32 rss_hash;
-	u8 valid;
-	u8 reserved1;
-	u8 reserved2;
-	u8 rxq_id;
-};
-
-#endif /* __BNA_HW_H__ */
diff --git a/drivers/net/bna/bna_txrx.c b/drivers/net/bna/bna_txrx.c
deleted file mode 100644
index f0983c832447..000000000000
--- a/drivers/net/bna/bna_txrx.c
+++ /dev/null
@@ -1,4185 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
-  */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- */
-#include "bna.h"
-#include "bfa_cs.h"
-#include "bfi.h"
-
-/**
- * IB
- */
-#define bna_ib_find_free_ibidx(_mask, _pos)\
-do {\
-	(_pos) = 0;\
-	while (((_pos) < (BFI_IBIDX_MAX_SEGSIZE)) &&\
-		((1 << (_pos)) & (_mask)))\
-		(_pos)++;\
-} while (0)
-
-#define bna_ib_count_ibidx(_mask, _count)\
-do {\
-	int pos = 0;\
-	(_count) = 0;\
-	while (pos < (BFI_IBIDX_MAX_SEGSIZE)) {\
-		if ((1 << pos) & (_mask))\
-			(_count) = pos + 1;\
-		pos++;\
-	} \
-} while (0)
-
-#define bna_ib_select_segpool(_count, _q_idx)\
-do {\
-	int i;\
-	(_q_idx) = -1;\
-	for (i = 0; i < BFI_IBIDX_TOTAL_POOLS; i++) {\
-		if ((_count <= ibidx_pool[i].pool_entry_size)) {\
-			(_q_idx) = i;\
-			break;\
-		} \
-	} \
-} while (0)
-
-struct bna_ibidx_pool {
-	int	pool_size;
-	int	pool_entry_size;
-};
-init_ibidx_pool(ibidx_pool);
-
-static struct bna_intr *
-bna_intr_get(struct bna_ib_mod *ib_mod, enum bna_intr_type intr_type,
-		int vector)
-{
-	struct bna_intr *intr;
-	struct list_head *qe;
-
-	list_for_each(qe, &ib_mod->intr_active_q) {
-		intr = (struct bna_intr *)qe;
-
-		if ((intr->intr_type == intr_type) &&
-			(intr->vector == vector)) {
-			intr->ref_count++;
-			return intr;
-		}
-	}
-
-	if (list_empty(&ib_mod->intr_free_q))
-		return NULL;
-
-	bfa_q_deq(&ib_mod->intr_free_q, &intr);
-	bfa_q_qe_init(&intr->qe);
-
-	intr->ref_count = 1;
-	intr->intr_type = intr_type;
-	intr->vector = vector;
-
-	list_add_tail(&intr->qe, &ib_mod->intr_active_q);
-
-	return intr;
-}
-
-static void
-bna_intr_put(struct bna_ib_mod *ib_mod,
-		struct bna_intr *intr)
-{
-	intr->ref_count--;
-
-	if (intr->ref_count == 0) {
-		intr->ib = NULL;
-		list_del(&intr->qe);
-		bfa_q_qe_init(&intr->qe);
-		list_add_tail(&intr->qe, &ib_mod->intr_free_q);
-	}
-}
-
-void
-bna_ib_mod_init(struct bna_ib_mod *ib_mod, struct bna *bna,
-		struct bna_res_info *res_info)
-{
-	int i;
-	int j;
-	int count;
-	u8 offset;
-	struct bna_doorbell_qset *qset;
-	unsigned long off;
-
-	ib_mod->bna = bna;
-
-	ib_mod->ib = (struct bna_ib *)
-		res_info[BNA_RES_MEM_T_IB_ARRAY].res_u.mem_info.mdl[0].kva;
-	ib_mod->intr = (struct bna_intr *)
-		res_info[BNA_RES_MEM_T_INTR_ARRAY].res_u.mem_info.mdl[0].kva;
-	ib_mod->idx_seg = (struct bna_ibidx_seg *)
-		res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_u.mem_info.mdl[0].kva;
-
-	INIT_LIST_HEAD(&ib_mod->ib_free_q);
-	INIT_LIST_HEAD(&ib_mod->intr_free_q);
-	INIT_LIST_HEAD(&ib_mod->intr_active_q);
-
-	for (i = 0; i < BFI_IBIDX_TOTAL_POOLS; i++)
-		INIT_LIST_HEAD(&ib_mod->ibidx_seg_pool[i]);
-
-	for (i = 0; i < BFI_MAX_IB; i++) {
-		ib_mod->ib[i].ib_id = i;
-
-		ib_mod->ib[i].ib_seg_host_addr_kva =
-		res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].kva;
-		ib_mod->ib[i].ib_seg_host_addr.lsb =
-		res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].dma.lsb;
-		ib_mod->ib[i].ib_seg_host_addr.msb =
-		res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].dma.msb;
-
-		qset = (struct bna_doorbell_qset *)0;
-		off = (unsigned long)(&qset[i >> 1].ib0[(i & 0x1)
-					* (0x20 >> 2)]);
-		ib_mod->ib[i].door_bell.doorbell_addr = off +
-			BNA_GET_DOORBELL_BASE_ADDR(bna->pcidev.pci_bar_kva);
-
-		bfa_q_qe_init(&ib_mod->ib[i].qe);
-		list_add_tail(&ib_mod->ib[i].qe, &ib_mod->ib_free_q);
-
-		bfa_q_qe_init(&ib_mod->intr[i].qe);
-		list_add_tail(&ib_mod->intr[i].qe, &ib_mod->intr_free_q);
-	}
-
-	count = 0;
-	offset = 0;
-	for (i = 0; i < BFI_IBIDX_TOTAL_POOLS; i++) {
-		for (j = 0; j < ibidx_pool[i].pool_size; j++) {
-			bfa_q_qe_init(&ib_mod->idx_seg[count]);
-			ib_mod->idx_seg[count].ib_seg_size =
-					ibidx_pool[i].pool_entry_size;
-			ib_mod->idx_seg[count].ib_idx_tbl_offset = offset;
-			list_add_tail(&ib_mod->idx_seg[count].qe,
-				&ib_mod->ibidx_seg_pool[i]);
-			count++;
-			offset += ibidx_pool[i].pool_entry_size;
-		}
-	}
-}
-
-void
-bna_ib_mod_uninit(struct bna_ib_mod *ib_mod)
-{
-	int i;
-	int j;
-	struct list_head *qe;
-
-	i = 0;
-	list_for_each(qe, &ib_mod->ib_free_q)
-		i++;
-
-	i = 0;
-	list_for_each(qe, &ib_mod->intr_free_q)
-		i++;
-
-	for (i = 0; i < BFI_IBIDX_TOTAL_POOLS; i++) {
-		j = 0;
-		list_for_each(qe, &ib_mod->ibidx_seg_pool[i])
-			j++;
-	}
-
-	ib_mod->bna = NULL;
-}
-
-static struct bna_ib *
-bna_ib_get(struct bna_ib_mod *ib_mod,
-		enum bna_intr_type intr_type,
-		int vector)
-{
-	struct bna_ib *ib;
-	struct bna_intr *intr;
-
-	if (intr_type == BNA_INTR_T_INTX)
-		vector = (1 << vector);
-
-	intr = bna_intr_get(ib_mod, intr_type, vector);
-	if (intr == NULL)
-		return NULL;
-
-	if (intr->ib) {
-		if (intr->ib->ref_count == BFI_IBIDX_MAX_SEGSIZE) {
-			bna_intr_put(ib_mod, intr);
-			return NULL;
-		}
-		intr->ib->ref_count++;
-		return intr->ib;
-	}
-
-	if (list_empty(&ib_mod->ib_free_q)) {
-		bna_intr_put(ib_mod, intr);
-		return NULL;
-	}
-
-	bfa_q_deq(&ib_mod->ib_free_q, &ib);
-	bfa_q_qe_init(&ib->qe);
-
-	ib->ref_count = 1;
-	ib->start_count = 0;
-	ib->idx_mask = 0;
-
-	ib->intr = intr;
-	ib->idx_seg = NULL;
-	intr->ib = ib;
-
-	ib->bna = ib_mod->bna;
-
-	return ib;
-}
-
-static void
-bna_ib_put(struct bna_ib_mod *ib_mod, struct bna_ib *ib)
-{
-	bna_intr_put(ib_mod, ib->intr);
-
-	ib->ref_count--;
-
-	if (ib->ref_count == 0) {
-		ib->intr = NULL;
-		ib->bna = NULL;
-		list_add_tail(&ib->qe, &ib_mod->ib_free_q);
-	}
-}
-
-/* Returns index offset - starting from 0 */
-static int
-bna_ib_reserve_idx(struct bna_ib *ib)
-{
-	struct bna_ib_mod *ib_mod = &ib->bna->ib_mod;
-	struct bna_ibidx_seg *idx_seg;
-	int idx;
-	int num_idx;
-	int q_idx;
-
-	/* Find the first free index position */
-	bna_ib_find_free_ibidx(ib->idx_mask, idx);
-	if (idx == BFI_IBIDX_MAX_SEGSIZE)
-		return -1;
-
-	/*
-	 * Calculate the total number of indexes held by this IB,
-	 * including the index newly reserved above.
-	 */
-	bna_ib_count_ibidx((ib->idx_mask | (1 << idx)), num_idx);
-
-	/* See if there is a free space in the index segment held by this IB */
-	if (ib->idx_seg && (num_idx <= ib->idx_seg->ib_seg_size)) {
-		ib->idx_mask |= (1 << idx);
-		return idx;
-	}
-
-	if (ib->start_count)
-		return -1;
-
-	/* Allocate a new segment */
-	bna_ib_select_segpool(num_idx, q_idx);
-	while (1) {
-		if (q_idx == BFI_IBIDX_TOTAL_POOLS)
-			return -1;
-		if (!list_empty(&ib_mod->ibidx_seg_pool[q_idx]))
-			break;
-		q_idx++;
-	}
-	bfa_q_deq(&ib_mod->ibidx_seg_pool[q_idx], &idx_seg);
-	bfa_q_qe_init(&idx_seg->qe);
-
-	/* Free the old segment */
-	if (ib->idx_seg) {
-		bna_ib_select_segpool(ib->idx_seg->ib_seg_size, q_idx);
-		list_add_tail(&ib->idx_seg->qe, &ib_mod->ibidx_seg_pool[q_idx]);
-	}
-
-	ib->idx_seg = idx_seg;
-
-	ib->idx_mask |= (1 << idx);
-
-	return idx;
-}
-
-static void
-bna_ib_release_idx(struct bna_ib *ib, int idx)
-{
-	struct bna_ib_mod *ib_mod = &ib->bna->ib_mod;
-	struct bna_ibidx_seg *idx_seg;
-	int num_idx;
-	int cur_q_idx;
-	int new_q_idx;
-
-	ib->idx_mask &= ~(1 << idx);
-
-	if (ib->start_count)
-		return;
-
-	bna_ib_count_ibidx(ib->idx_mask, num_idx);
-
-	/*
-	 * Free the segment, if there are no more indexes in the segment
-	 * held by this IB
-	 */
-	if (!num_idx) {
-		bna_ib_select_segpool(ib->idx_seg->ib_seg_size, cur_q_idx);
-		list_add_tail(&ib->idx_seg->qe,
-			&ib_mod->ibidx_seg_pool[cur_q_idx]);
-		ib->idx_seg = NULL;
-		return;
-	}
-
-	/* See if we can move to a smaller segment */
-	bna_ib_select_segpool(num_idx, new_q_idx);
-	bna_ib_select_segpool(ib->idx_seg->ib_seg_size, cur_q_idx);
-	while (new_q_idx < cur_q_idx) {
-		if (!list_empty(&ib_mod->ibidx_seg_pool[new_q_idx]))
-			break;
-		new_q_idx++;
-	}
-	if (new_q_idx < cur_q_idx) {
-		/* Select the new smaller segment */
-		bfa_q_deq(&ib_mod->ibidx_seg_pool[new_q_idx], &idx_seg);
-		bfa_q_qe_init(&idx_seg->qe);
-		/* Free the old segment */
-		list_add_tail(&ib->idx_seg->qe,
-			&ib_mod->ibidx_seg_pool[cur_q_idx]);
-		ib->idx_seg = idx_seg;
-	}
-}
-
-static int
-bna_ib_config(struct bna_ib *ib, struct bna_ib_config *ib_config)
-{
-	if (ib->start_count)
-		return -1;
-
-	ib->ib_config.coalescing_timeo = ib_config->coalescing_timeo;
-	ib->ib_config.interpkt_timeo = ib_config->interpkt_timeo;
-	ib->ib_config.interpkt_count = ib_config->interpkt_count;
-	ib->ib_config.ctrl_flags = ib_config->ctrl_flags;
-
-	ib->ib_config.ctrl_flags |= BFI_IB_CF_MASTER_ENABLE;
-	if (ib->intr->intr_type == BNA_INTR_T_MSIX)
-		ib->ib_config.ctrl_flags |= BFI_IB_CF_MSIX_MODE;
-
-	return 0;
-}
-
-static void
-bna_ib_start(struct bna_ib *ib)
-{
-	struct bna_ib_blk_mem ib_cfg;
-	struct bna_ib_blk_mem *ib_mem;
-	u32 pg_num;
-	u32 intx_mask;
-	int i;
-	void __iomem *base_addr;
-	unsigned long off;
-
-	ib->start_count++;
-
-	if (ib->start_count > 1)
-		return;
-
-	ib_cfg.host_addr_lo = (u32)(ib->ib_seg_host_addr.lsb);
-	ib_cfg.host_addr_hi = (u32)(ib->ib_seg_host_addr.msb);
-
-	ib_cfg.clsc_n_ctrl_n_msix = (((u32)
-				     ib->ib_config.coalescing_timeo << 16) |
-				((u32)ib->ib_config.ctrl_flags << 8) |
-				(ib->intr->vector));
-	ib_cfg.ipkt_n_ent_n_idxof =
-				((u32)
-				 (ib->ib_config.interpkt_timeo & 0xf) << 16) |
-				((u32)ib->idx_seg->ib_seg_size << 8) |
-				(ib->idx_seg->ib_idx_tbl_offset);
-	ib_cfg.ipkt_cnt_cfg_n_unacked = ((u32)
-					 ib->ib_config.interpkt_count << 24);
-
-	pg_num = BNA_GET_PAGE_NUM(HQM0_BLK_PG_NUM + ib->bna->port_num,
-				HQM_IB_RAM_BASE_OFFSET);
-	writel(pg_num, ib->bna->regs.page_addr);
-
-	base_addr = BNA_GET_MEM_BASE_ADDR(ib->bna->pcidev.pci_bar_kva,
-					HQM_IB_RAM_BASE_OFFSET);
-
-	ib_mem = (struct bna_ib_blk_mem *)0;
-	off = (unsigned long)&ib_mem[ib->ib_id].host_addr_lo;
-	writel(htonl(ib_cfg.host_addr_lo), base_addr + off);
-
-	off = (unsigned long)&ib_mem[ib->ib_id].host_addr_hi;
-	writel(htonl(ib_cfg.host_addr_hi), base_addr + off);
-
-	off = (unsigned long)&ib_mem[ib->ib_id].clsc_n_ctrl_n_msix;
-	writel(ib_cfg.clsc_n_ctrl_n_msix, base_addr + off);
-
-	off = (unsigned long)&ib_mem[ib->ib_id].ipkt_n_ent_n_idxof;
-	writel(ib_cfg.ipkt_n_ent_n_idxof, base_addr + off);
-
-	off = (unsigned long)&ib_mem[ib->ib_id].ipkt_cnt_cfg_n_unacked;
-	writel(ib_cfg.ipkt_cnt_cfg_n_unacked, base_addr + off);
-
-	ib->door_bell.doorbell_ack = BNA_DOORBELL_IB_INT_ACK(
-				(u32)ib->ib_config.coalescing_timeo, 0);
-
-	pg_num = BNA_GET_PAGE_NUM(HQM0_BLK_PG_NUM + ib->bna->port_num,
-				HQM_INDX_TBL_RAM_BASE_OFFSET);
-	writel(pg_num, ib->bna->regs.page_addr);
-
-	base_addr = BNA_GET_MEM_BASE_ADDR(ib->bna->pcidev.pci_bar_kva,
-					HQM_INDX_TBL_RAM_BASE_OFFSET);
-	for (i = 0; i < ib->idx_seg->ib_seg_size; i++) {
-		off = (unsigned long)
-		((ib->idx_seg->ib_idx_tbl_offset + i) * BFI_IBIDX_SIZE);
-		writel(0, base_addr + off);
-	}
-
-	if (ib->intr->intr_type == BNA_INTR_T_INTX) {
-		bna_intx_disable(ib->bna, intx_mask);
-		intx_mask &= ~(ib->intr->vector);
-		bna_intx_enable(ib->bna, intx_mask);
-	}
-}
-
-static void
-bna_ib_stop(struct bna_ib *ib)
-{
-	u32 intx_mask;
-
-	ib->start_count--;
-
-	if (ib->start_count == 0) {
-		writel(BNA_DOORBELL_IB_INT_DISABLE,
-				ib->door_bell.doorbell_addr);
-		if (ib->intr->intr_type == BNA_INTR_T_INTX) {
-			bna_intx_disable(ib->bna, intx_mask);
-			intx_mask |= (ib->intr->vector);
-			bna_intx_enable(ib->bna, intx_mask);
-		}
-	}
-}
-
-static void
-bna_ib_fail(struct bna_ib *ib)
-{
-	ib->start_count = 0;
-}
-
-/**
- * RXF
- */
-static void rxf_enable(struct bna_rxf *rxf);
-static void rxf_disable(struct bna_rxf *rxf);
-static void __rxf_config_set(struct bna_rxf *rxf);
-static void __rxf_rit_set(struct bna_rxf *rxf);
-static void __bna_rxf_stat_clr(struct bna_rxf *rxf);
-static int rxf_process_packet_filter(struct bna_rxf *rxf);
-static int rxf_clear_packet_filter(struct bna_rxf *rxf);
-static void rxf_reset_packet_filter(struct bna_rxf *rxf);
-static void rxf_cb_enabled(void *arg, int status);
-static void rxf_cb_disabled(void *arg, int status);
-static void bna_rxf_cb_stats_cleared(void *arg, int status);
-static void __rxf_enable(struct bna_rxf *rxf);
-static void __rxf_disable(struct bna_rxf *rxf);
-
-bfa_fsm_state_decl(bna_rxf, stopped, struct bna_rxf,
-			enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, start_wait, struct bna_rxf,
-			enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, cam_fltr_mod_wait, struct bna_rxf,
-			enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, started, struct bna_rxf,
-			enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, cam_fltr_clr_wait, struct bna_rxf,
-			enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, stop_wait, struct bna_rxf,
-			enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, pause_wait, struct bna_rxf,
-			enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, resume_wait, struct bna_rxf,
-			enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, stat_clr_wait, struct bna_rxf,
-			enum bna_rxf_event);
-
-static struct bfa_sm_table rxf_sm_table[] = {
-	{BFA_SM(bna_rxf_sm_stopped), BNA_RXF_STOPPED},
-	{BFA_SM(bna_rxf_sm_start_wait), BNA_RXF_START_WAIT},
-	{BFA_SM(bna_rxf_sm_cam_fltr_mod_wait), BNA_RXF_CAM_FLTR_MOD_WAIT},
-	{BFA_SM(bna_rxf_sm_started), BNA_RXF_STARTED},
-	{BFA_SM(bna_rxf_sm_cam_fltr_clr_wait), BNA_RXF_CAM_FLTR_CLR_WAIT},
-	{BFA_SM(bna_rxf_sm_stop_wait), BNA_RXF_STOP_WAIT},
-	{BFA_SM(bna_rxf_sm_pause_wait), BNA_RXF_PAUSE_WAIT},
-	{BFA_SM(bna_rxf_sm_resume_wait), BNA_RXF_RESUME_WAIT},
-	{BFA_SM(bna_rxf_sm_stat_clr_wait), BNA_RXF_STAT_CLR_WAIT}
-};
-
-static void
-bna_rxf_sm_stopped_entry(struct bna_rxf *rxf)
-{
-	call_rxf_stop_cbfn(rxf, BNA_CB_SUCCESS);
-}
-
-static void
-bna_rxf_sm_stopped(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_START:
-		bfa_fsm_set_state(rxf, bna_rxf_sm_start_wait);
-		break;
-
-	case RXF_E_STOP:
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	case RXF_E_FAIL:
-		/* No-op */
-		break;
-
-	case RXF_E_CAM_FLTR_MOD:
-		call_rxf_cam_fltr_cbfn(rxf, BNA_CB_SUCCESS);
-		break;
-
-	case RXF_E_STARTED:
-	case RXF_E_STOPPED:
-	case RXF_E_CAM_FLTR_RESP:
-		/**
-		 * These events are received due to flushing of mbox
-		 * when device fails
-		 */
-		/* No-op */
-		break;
-
-	case RXF_E_PAUSE:
-		rxf->rxf_oper_state = BNA_RXF_OPER_STATE_PAUSED;
-		call_rxf_pause_cbfn(rxf, BNA_CB_SUCCESS);
-		break;
-
-	case RXF_E_RESUME:
-		rxf->rxf_oper_state = BNA_RXF_OPER_STATE_RUNNING;
-		call_rxf_resume_cbfn(rxf, BNA_CB_SUCCESS);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_rxf_sm_start_wait_entry(struct bna_rxf *rxf)
-{
-	__rxf_config_set(rxf);
-	__rxf_rit_set(rxf);
-	rxf_enable(rxf);
-}
-
-static void
-bna_rxf_sm_start_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_STOP:
-		/**
-		 * STOP is originated from bnad. When this happens,
-		 * it can not be waiting for filter update
-		 */
-		call_rxf_start_cbfn(rxf, BNA_CB_INTERRUPT);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stop_wait);
-		break;
-
-	case RXF_E_FAIL:
-		call_rxf_cam_fltr_cbfn(rxf, BNA_CB_SUCCESS);
-		call_rxf_start_cbfn(rxf, BNA_CB_FAIL);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	case RXF_E_CAM_FLTR_MOD:
-		/* No-op */
-		break;
-
-	case RXF_E_STARTED:
-		/**
-		 * Force rxf_process_filter() to go through initial
-		 * config
-		 */
-		if ((rxf->ucast_active_mac != NULL) &&
-			(rxf->ucast_pending_set == 0))
-			rxf->ucast_pending_set = 1;
-
-		if (rxf->rss_status == BNA_STATUS_T_ENABLED)
-			rxf->rxf_flags |= BNA_RXF_FL_RSS_CONFIG_PENDING;
-
-		rxf->rxf_flags |= BNA_RXF_FL_VLAN_CONFIG_PENDING;
-
-		bfa_fsm_set_state(rxf, bna_rxf_sm_cam_fltr_mod_wait);
-		break;
-
-	case RXF_E_PAUSE:
-	case RXF_E_RESUME:
-		rxf->rxf_flags |= BNA_RXF_FL_OPERSTATE_CHANGED;
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_rxf_sm_cam_fltr_mod_wait_entry(struct bna_rxf *rxf)
-{
-	if (!rxf_process_packet_filter(rxf)) {
-		/* No more pending CAM entries to update */
-		bfa_fsm_set_state(rxf, bna_rxf_sm_started);
-	}
-}
-
-static void
-bna_rxf_sm_cam_fltr_mod_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_STOP:
-		/**
-		 * STOP is originated from bnad. When this happens,
-		 * it can not be waiting for filter update
-		 */
-		call_rxf_start_cbfn(rxf, BNA_CB_INTERRUPT);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_cam_fltr_clr_wait);
-		break;
-
-	case RXF_E_FAIL:
-		rxf_reset_packet_filter(rxf);
-		call_rxf_cam_fltr_cbfn(rxf, BNA_CB_SUCCESS);
-		call_rxf_start_cbfn(rxf, BNA_CB_FAIL);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	case RXF_E_CAM_FLTR_MOD:
-		/* No-op */
-		break;
-
-	case RXF_E_CAM_FLTR_RESP:
-		if (!rxf_process_packet_filter(rxf)) {
-			/* No more pending CAM entries to update */
-			call_rxf_cam_fltr_cbfn(rxf, BNA_CB_SUCCESS);
-			bfa_fsm_set_state(rxf, bna_rxf_sm_started);
-		}
-		break;
-
-	case RXF_E_PAUSE:
-	case RXF_E_RESUME:
-		rxf->rxf_flags |= BNA_RXF_FL_OPERSTATE_CHANGED;
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_rxf_sm_started_entry(struct bna_rxf *rxf)
-{
-	call_rxf_start_cbfn(rxf, BNA_CB_SUCCESS);
-
-	if (rxf->rxf_flags & BNA_RXF_FL_OPERSTATE_CHANGED) {
-		if (rxf->rxf_oper_state == BNA_RXF_OPER_STATE_PAUSED)
-			bfa_fsm_send_event(rxf, RXF_E_PAUSE);
-		else
-			bfa_fsm_send_event(rxf, RXF_E_RESUME);
-	}
-
-}
-
-static void
-bna_rxf_sm_started(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_STOP:
-		bfa_fsm_set_state(rxf, bna_rxf_sm_cam_fltr_clr_wait);
-		/* Hack to get FSM start clearing CAM entries */
-		bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_RESP);
-		break;
-
-	case RXF_E_FAIL:
-		rxf_reset_packet_filter(rxf);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	case RXF_E_CAM_FLTR_MOD:
-		bfa_fsm_set_state(rxf, bna_rxf_sm_cam_fltr_mod_wait);
-		break;
-
-	case RXF_E_PAUSE:
-		bfa_fsm_set_state(rxf, bna_rxf_sm_pause_wait);
-		break;
-
-	case RXF_E_RESUME:
-		bfa_fsm_set_state(rxf, bna_rxf_sm_resume_wait);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_rxf_sm_cam_fltr_clr_wait_entry(struct bna_rxf *rxf)
-{
-	/**
-	 *  Note: Do not add rxf_clear_packet_filter here.
-	 * It will overstep mbox when this transition happens:
-	 *	cam_fltr_mod_wait -> cam_fltr_clr_wait on RXF_E_STOP event
-	 */
-}
-
-static void
-bna_rxf_sm_cam_fltr_clr_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_FAIL:
-		/**
-		 * FSM was in the process of stopping, initiated by
-		 * bnad. When this happens, no one can be waiting for
-		 * start or filter update
-		 */
-		rxf_reset_packet_filter(rxf);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	case RXF_E_CAM_FLTR_RESP:
-		if (!rxf_clear_packet_filter(rxf)) {
-			/* No more pending CAM entries to clear */
-			bfa_fsm_set_state(rxf, bna_rxf_sm_stop_wait);
-			rxf_disable(rxf);
-		}
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_rxf_sm_stop_wait_entry(struct bna_rxf *rxf)
-{
-	/**
-	 * NOTE: Do not add  rxf_disable here.
-	 * It will overstep mbox when this transition happens:
-	 *	start_wait -> stop_wait on RXF_E_STOP event
-	 */
-}
-
-static void
-bna_rxf_sm_stop_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_FAIL:
-		/**
-		 * FSM was in the process of stopping, initiated by
-		 * bnad. When this happens, no one can be waiting for
-		 * start or filter update
-		 */
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	case RXF_E_STARTED:
-		/**
-		 * This event is received due to abrupt transition from
-		 * bna_rxf_sm_start_wait state on receiving
-		 * RXF_E_STOP event
-		 */
-		rxf_disable(rxf);
-		break;
-
-	case RXF_E_STOPPED:
-		/**
-		 * FSM was in the process of stopping, initiated by
-		 * bnad. When this happens, no one can be waiting for
-		 * start or filter update
-		 */
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stat_clr_wait);
-		break;
-
-	case RXF_E_PAUSE:
-		rxf->rxf_oper_state = BNA_RXF_OPER_STATE_PAUSED;
-		break;
-
-	case RXF_E_RESUME:
-		rxf->rxf_oper_state = BNA_RXF_OPER_STATE_RUNNING;
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_rxf_sm_pause_wait_entry(struct bna_rxf *rxf)
-{
-	rxf->rxf_flags &=
-		~(BNA_RXF_FL_OPERSTATE_CHANGED | BNA_RXF_FL_RXF_ENABLED);
-	__rxf_disable(rxf);
-}
-
-static void
-bna_rxf_sm_pause_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_FAIL:
-		/**
-		 * FSM was in the process of disabling rxf, initiated by
-		 * bnad.
-		 */
-		call_rxf_pause_cbfn(rxf, BNA_CB_FAIL);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	case RXF_E_STOPPED:
-		rxf->rxf_oper_state = BNA_RXF_OPER_STATE_PAUSED;
-		call_rxf_pause_cbfn(rxf, BNA_CB_SUCCESS);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_started);
-		break;
-
-	/*
-	 * Since PAUSE/RESUME can only be sent by bnad, we don't expect
-	 * any other event during these states
-	 */
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_rxf_sm_resume_wait_entry(struct bna_rxf *rxf)
-{
-	rxf->rxf_flags &= ~(BNA_RXF_FL_OPERSTATE_CHANGED);
-	rxf->rxf_flags |= BNA_RXF_FL_RXF_ENABLED;
-	__rxf_enable(rxf);
-}
-
-static void
-bna_rxf_sm_resume_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_FAIL:
-		/**
-		 * FSM was in the process of disabling rxf, initiated by
-		 * bnad.
-		 */
-		call_rxf_resume_cbfn(rxf, BNA_CB_FAIL);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	case RXF_E_STARTED:
-		rxf->rxf_oper_state = BNA_RXF_OPER_STATE_RUNNING;
-		call_rxf_resume_cbfn(rxf, BNA_CB_SUCCESS);
-		bfa_fsm_set_state(rxf, bna_rxf_sm_started);
-		break;
-
-	/*
-	 * Since PAUSE/RESUME can only be sent by bnad, we don't expect
-	 * any other event during these states
-	 */
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_rxf_sm_stat_clr_wait_entry(struct bna_rxf *rxf)
-{
-	__bna_rxf_stat_clr(rxf);
-}
-
-static void
-bna_rxf_sm_stat_clr_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
-	switch (event) {
-	case RXF_E_FAIL:
-	case RXF_E_STAT_CLEARED:
-		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-__rxf_enable(struct bna_rxf *rxf)
-{
-	struct bfi_ll_rxf_multi_req ll_req;
-	u32 bm[2] = {0, 0};
-
-	if (rxf->rxf_id < 32)
-		bm[0] = 1 << rxf->rxf_id;
-	else
-		bm[1] = 1 << (rxf->rxf_id - 32);
-
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_RX_REQ, 0);
-	ll_req.rxf_id_mask[0] = htonl(bm[0]);
-	ll_req.rxf_id_mask[1] = htonl(bm[1]);
-	ll_req.enable = 1;
-
-	bna_mbox_qe_fill(&rxf->mbox_qe, &ll_req, sizeof(ll_req),
-			rxf_cb_enabled, rxf);
-
-	bna_mbox_send(rxf->rx->bna, &rxf->mbox_qe);
-}
-
-static void
-__rxf_disable(struct bna_rxf *rxf)
-{
-	struct bfi_ll_rxf_multi_req ll_req;
-	u32 bm[2] = {0, 0};
-
-	if (rxf->rxf_id < 32)
-		bm[0] = 1 << rxf->rxf_id;
-	else
-		bm[1] = 1 << (rxf->rxf_id - 32);
-
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_RX_REQ, 0);
-	ll_req.rxf_id_mask[0] = htonl(bm[0]);
-	ll_req.rxf_id_mask[1] = htonl(bm[1]);
-	ll_req.enable = 0;
-
-	bna_mbox_qe_fill(&rxf->mbox_qe, &ll_req, sizeof(ll_req),
-			rxf_cb_disabled, rxf);
-
-	bna_mbox_send(rxf->rx->bna, &rxf->mbox_qe);
-}
-
-static void
-__rxf_config_set(struct bna_rxf *rxf)
-{
-	u32 i;
-	struct bna_rss_mem *rss_mem;
-	struct bna_rx_fndb_ram *rx_fndb_ram;
-	struct bna *bna = rxf->rx->bna;
-	void __iomem *base_addr;
-	unsigned long off;
-
-	base_addr = BNA_GET_MEM_BASE_ADDR(bna->pcidev.pci_bar_kva,
-			RSS_TABLE_BASE_OFFSET);
-
-	rss_mem = (struct bna_rss_mem *)0;
-
-	/* Configure RSS if required */
-	if (rxf->ctrl_flags & BNA_RXF_CF_RSS_ENABLE) {
-		/* configure RSS Table */
-		writel(BNA_GET_PAGE_NUM(RAD0_MEM_BLK_BASE_PG_NUM +
-			bna->port_num, RSS_TABLE_BASE_OFFSET),
-					bna->regs.page_addr);
-
-		/* temporarily disable RSS, while hash value is written */
-		off = (unsigned long)&rss_mem[0].type_n_hash;
-		writel(0, base_addr + off);
-
-		for (i = 0; i < BFI_RSS_HASH_KEY_LEN; i++) {
-			off = (unsigned long)
-			&rss_mem[0].hash_key[(BFI_RSS_HASH_KEY_LEN - 1) - i];
-			writel(htonl(rxf->rss_cfg.toeplitz_hash_key[i]),
-			base_addr + off);
-		}
-
-		off = (unsigned long)&rss_mem[0].type_n_hash;
-		writel(rxf->rss_cfg.hash_type | rxf->rss_cfg.hash_mask,
-			base_addr + off);
-	}
-
-	/* Configure RxF */
-	writel(BNA_GET_PAGE_NUM(
-		LUT0_MEM_BLK_BASE_PG_NUM + (bna->port_num * 2),
-		RX_FNDB_RAM_BASE_OFFSET),
-		bna->regs.page_addr);
-
-	base_addr = BNA_GET_MEM_BASE_ADDR(bna->pcidev.pci_bar_kva,
-		RX_FNDB_RAM_BASE_OFFSET);
-
-	rx_fndb_ram = (struct bna_rx_fndb_ram *)0;
-
-	/* We always use RSS table 0 */
-	off = (unsigned long)&rx_fndb_ram[rxf->rxf_id].rss_prop;
-	writel(rxf->ctrl_flags & BNA_RXF_CF_RSS_ENABLE,
-		base_addr + off);
-
-	/* small large buffer enable/disable */
-	off = (unsigned long)&rx_fndb_ram[rxf->rxf_id].size_routing_props;
-	writel((rxf->ctrl_flags & BNA_RXF_CF_SM_LG_RXQ) | 0x80,
-		base_addr + off);
-
-	/* RIT offset,  HDS forced offset, multicast RxQ Id */
-	off = (unsigned long)&rx_fndb_ram[rxf->rxf_id].rit_hds_mcastq;
-	writel((rxf->rit_segment->rit_offset << 16) |
-		(rxf->forced_offset << 8) |
-		(rxf->hds_cfg.hdr_type & BNA_HDS_FORCED) | rxf->mcast_rxq_id,
-		base_addr + off);
-
-	/*
-	 * default vlan tag, default function enable, strip vlan bytes,
-	 * HDS type, header size
-	 */
-
-	off = (unsigned long)&rx_fndb_ram[rxf->rxf_id].control_flags;
-	 writel(((u32)rxf->default_vlan_tag << 16) |
-		(rxf->ctrl_flags &
-			(BNA_RXF_CF_DEFAULT_VLAN |
-			BNA_RXF_CF_DEFAULT_FUNCTION_ENABLE |
-			BNA_RXF_CF_VLAN_STRIP)) |
-		(rxf->hds_cfg.hdr_type & ~BNA_HDS_FORCED) |
-		rxf->hds_cfg.header_size,
-		base_addr + off);
-}
-
-void
-__rxf_vlan_filter_set(struct bna_rxf *rxf, enum bna_status status)
-{
-	struct bna *bna = rxf->rx->bna;
-	int i;
-
-	writel(BNA_GET_PAGE_NUM(LUT0_MEM_BLK_BASE_PG_NUM +
-			(bna->port_num * 2), VLAN_RAM_BASE_OFFSET),
-			bna->regs.page_addr);
-
-	if (status == BNA_STATUS_T_ENABLED) {
-		/* enable VLAN filtering on this function */
-		for (i = 0; i <= BFI_MAX_VLAN / 32; i++) {
-			writel(rxf->vlan_filter_table[i],
-					BNA_GET_VLAN_MEM_ENTRY_ADDR
-					(bna->pcidev.pci_bar_kva, rxf->rxf_id,
-						i * 32));
-		}
-	} else {
-		/* disable VLAN filtering on this function */
-		for (i = 0; i <= BFI_MAX_VLAN / 32; i++) {
-			writel(0xffffffff,
-					BNA_GET_VLAN_MEM_ENTRY_ADDR
-					(bna->pcidev.pci_bar_kva, rxf->rxf_id,
-						i * 32));
-		}
-	}
-}
-
-static void
-__rxf_rit_set(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-	struct bna_rit_mem *rit_mem;
-	int i;
-	void __iomem *base_addr;
-	unsigned long off;
-
-	base_addr = BNA_GET_MEM_BASE_ADDR(bna->pcidev.pci_bar_kva,
-			FUNCTION_TO_RXQ_TRANSLATE);
-
-	rit_mem = (struct bna_rit_mem *)0;
-
-	writel(BNA_GET_PAGE_NUM(RXA0_MEM_BLK_BASE_PG_NUM + bna->port_num,
-		FUNCTION_TO_RXQ_TRANSLATE),
-		bna->regs.page_addr);
-
-	for (i = 0; i < rxf->rit_segment->rit_size; i++) {
-		off = (unsigned long)&rit_mem[i + rxf->rit_segment->rit_offset];
-		writel(rxf->rit_segment->rit[i].large_rxq_id << 6 |
-			rxf->rit_segment->rit[i].small_rxq_id,
-			base_addr + off);
-	}
-}
-
-static void
-__bna_rxf_stat_clr(struct bna_rxf *rxf)
-{
-	struct bfi_ll_stats_req ll_req;
-	u32 bm[2] = {0, 0};
-
-	if (rxf->rxf_id < 32)
-		bm[0] = 1 << rxf->rxf_id;
-	else
-		bm[1] = 1 << (rxf->rxf_id - 32);
-
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_STATS_CLEAR_REQ, 0);
-	ll_req.stats_mask = 0;
-	ll_req.txf_id_mask[0] = 0;
-	ll_req.txf_id_mask[1] =	0;
-
-	ll_req.rxf_id_mask[0] = htonl(bm[0]);
-	ll_req.rxf_id_mask[1] = htonl(bm[1]);
-
-	bna_mbox_qe_fill(&rxf->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_rxf_cb_stats_cleared, rxf);
-	bna_mbox_send(rxf->rx->bna, &rxf->mbox_qe);
-}
-
-static void
-rxf_enable(struct bna_rxf *rxf)
-{
-	if (rxf->rxf_oper_state == BNA_RXF_OPER_STATE_PAUSED)
-		bfa_fsm_send_event(rxf, RXF_E_STARTED);
-	else {
-		rxf->rxf_flags |= BNA_RXF_FL_RXF_ENABLED;
-		__rxf_enable(rxf);
-	}
-}
-
-static void
-rxf_cb_enabled(void *arg, int status)
-{
-	struct bna_rxf *rxf = (struct bna_rxf *)arg;
-
-	bfa_q_qe_init(&rxf->mbox_qe.qe);
-	bfa_fsm_send_event(rxf, RXF_E_STARTED);
-}
-
-static void
-rxf_disable(struct bna_rxf *rxf)
-{
-	if (rxf->rxf_oper_state == BNA_RXF_OPER_STATE_PAUSED)
-		bfa_fsm_send_event(rxf, RXF_E_STOPPED);
-	else
-		rxf->rxf_flags &= ~BNA_RXF_FL_RXF_ENABLED;
-		__rxf_disable(rxf);
-}
-
-static void
-rxf_cb_disabled(void *arg, int status)
-{
-	struct bna_rxf *rxf = (struct bna_rxf *)arg;
-
-	bfa_q_qe_init(&rxf->mbox_qe.qe);
-	bfa_fsm_send_event(rxf, RXF_E_STOPPED);
-}
-
-void
-rxf_cb_cam_fltr_mbox_cmd(void *arg, int status)
-{
-	struct bna_rxf *rxf = (struct bna_rxf *)arg;
-
-	bfa_q_qe_init(&rxf->mbox_qe.qe);
-
-	bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_RESP);
-}
-
-static void
-bna_rxf_cb_stats_cleared(void *arg, int status)
-{
-	struct bna_rxf *rxf = (struct bna_rxf *)arg;
-
-	bfa_q_qe_init(&rxf->mbox_qe.qe);
-	bfa_fsm_send_event(rxf, RXF_E_STAT_CLEARED);
-}
-
-void
-rxf_cam_mbox_cmd(struct bna_rxf *rxf, u8 cmd,
-		const struct bna_mac *mac_addr)
-{
-	struct bfi_ll_mac_addr_req req;
-
-	bfi_h2i_set(req.mh, BFI_MC_LL, cmd, 0);
-
-	req.rxf_id = rxf->rxf_id;
-	memcpy(&req.mac_addr, (void *)&mac_addr->addr, ETH_ALEN);
-
-	bna_mbox_qe_fill(&rxf->mbox_qe, &req, sizeof(req),
-				rxf_cb_cam_fltr_mbox_cmd, rxf);
-
-	bna_mbox_send(rxf->rx->bna, &rxf->mbox_qe);
-}
-
-static int
-rxf_process_packet_filter_mcast(struct bna_rxf *rxf)
-{
-	struct bna_mac *mac = NULL;
-	struct list_head *qe;
-
-	/* Add multicast entries */
-	if (!list_empty(&rxf->mcast_pending_add_q)) {
-		bfa_q_deq(&rxf->mcast_pending_add_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_ADD_REQ, mac);
-		list_add_tail(&mac->qe, &rxf->mcast_active_q);
-		return 1;
-	}
-
-	/* Delete multicast entries previousely added */
-	if (!list_empty(&rxf->mcast_pending_del_q)) {
-		bfa_q_deq(&rxf->mcast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_DEL_REQ, mac);
-		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int
-rxf_process_packet_filter_vlan(struct bna_rxf *rxf)
-{
-	/* Apply the VLAN filter */
-	if (rxf->rxf_flags & BNA_RXF_FL_VLAN_CONFIG_PENDING) {
-		rxf->rxf_flags &= ~BNA_RXF_FL_VLAN_CONFIG_PENDING;
-		if (!(rxf->rxmode_active & BNA_RXMODE_PROMISC))
-			__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-	}
-
-	/* Apply RSS configuration */
-	if (rxf->rxf_flags & BNA_RXF_FL_RSS_CONFIG_PENDING) {
-		rxf->rxf_flags &= ~BNA_RXF_FL_RSS_CONFIG_PENDING;
-		if (rxf->rss_status == BNA_STATUS_T_DISABLED) {
-			/* RSS is being disabled */
-			rxf->ctrl_flags &= ~BNA_RXF_CF_RSS_ENABLE;
-			__rxf_rit_set(rxf);
-			__rxf_config_set(rxf);
-		} else {
-			/* RSS is being enabled or reconfigured */
-			rxf->ctrl_flags |= BNA_RXF_CF_RSS_ENABLE;
-			__rxf_rit_set(rxf);
-			__rxf_config_set(rxf);
-		}
-	}
-
-	return 0;
-}
-
-/**
- * Processes pending ucast, mcast entry addition/deletion and issues mailbox
- * command. Also processes pending filter configuration - promiscuous mode,
- * default mode, allmutli mode and issues mailbox command or directly applies
- * to h/w
- */
-static int
-rxf_process_packet_filter(struct bna_rxf *rxf)
-{
-	/* Set the default MAC first */
-	if (rxf->ucast_pending_set > 0) {
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_SET_REQ,
-				rxf->ucast_active_mac);
-		rxf->ucast_pending_set--;
-		return 1;
-	}
-
-	if (rxf_process_packet_filter_ucast(rxf))
-		return 1;
-
-	if (rxf_process_packet_filter_mcast(rxf))
-		return 1;
-
-	if (rxf_process_packet_filter_promisc(rxf))
-		return 1;
-
-	if (rxf_process_packet_filter_allmulti(rxf))
-		return 1;
-
-	if (rxf_process_packet_filter_vlan(rxf))
-		return 1;
-
-	return 0;
-}
-
-static int
-rxf_clear_packet_filter_mcast(struct bna_rxf *rxf)
-{
-	struct bna_mac *mac = NULL;
-	struct list_head *qe;
-
-	/* 3. delete pending mcast entries */
-	if (!list_empty(&rxf->mcast_pending_del_q)) {
-		bfa_q_deq(&rxf->mcast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_DEL_REQ, mac);
-		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
-		return 1;
-	}
-
-	/* 4. clear active mcast entries; move them to pending_add_q */
-	if (!list_empty(&rxf->mcast_active_q)) {
-		bfa_q_deq(&rxf->mcast_active_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_DEL_REQ, mac);
-		list_add_tail(&mac->qe, &rxf->mcast_pending_add_q);
-		return 1;
-	}
-
-	return 0;
-}
-
-/**
- * In the rxf stop path, processes pending ucast/mcast delete queue and issues
- * the mailbox command. Moves the active ucast/mcast entries to pending add q,
- * so that they are added to CAM again in the rxf start path. Moves the current
- * filter settings - promiscuous, default, allmutli - to pending filter
- * configuration
- */
-static int
-rxf_clear_packet_filter(struct bna_rxf *rxf)
-{
-	if (rxf_clear_packet_filter_ucast(rxf))
-		return 1;
-
-	if (rxf_clear_packet_filter_mcast(rxf))
-		return 1;
-
-	/* 5. clear active default MAC in the CAM */
-	if (rxf->ucast_pending_set > 0)
-		rxf->ucast_pending_set = 0;
-
-	if (rxf_clear_packet_filter_promisc(rxf))
-		return 1;
-
-	if (rxf_clear_packet_filter_allmulti(rxf))
-		return 1;
-
-	return 0;
-}
-
-static void
-rxf_reset_packet_filter_mcast(struct bna_rxf *rxf)
-{
-	struct list_head *qe;
-	struct bna_mac *mac;
-
-	/* 3. Move active mcast entries to pending_add_q */
-	while (!list_empty(&rxf->mcast_active_q)) {
-		bfa_q_deq(&rxf->mcast_active_q, &qe);
-		bfa_q_qe_init(qe);
-		list_add_tail(qe, &rxf->mcast_pending_add_q);
-	}
-
-	/* 4. Throw away delete pending mcast entries */
-	while (!list_empty(&rxf->mcast_pending_del_q)) {
-		bfa_q_deq(&rxf->mcast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
-	}
-}
-
-/**
- * In the rxf fail path, throws away the ucast/mcast entries pending for
- * deletion, moves all active ucast/mcast entries to pending queue so that
- * they are added back to CAM in the rxf start path. Also moves the current
- * filter configuration to pending filter configuration.
- */
-static void
-rxf_reset_packet_filter(struct bna_rxf *rxf)
-{
-	rxf_reset_packet_filter_ucast(rxf);
-
-	rxf_reset_packet_filter_mcast(rxf);
-
-	/* 5. Turn off ucast set flag */
-	rxf->ucast_pending_set = 0;
-
-	rxf_reset_packet_filter_promisc(rxf);
-
-	rxf_reset_packet_filter_allmulti(rxf);
-}
-
-static void
-bna_rxf_init(struct bna_rxf *rxf,
-		struct bna_rx *rx,
-		struct bna_rx_config *q_config)
-{
-	struct list_head *qe;
-	struct bna_rxp *rxp;
-
-	/* rxf_id is initialized during rx_mod init */
-	rxf->rx = rx;
-
-	INIT_LIST_HEAD(&rxf->ucast_pending_add_q);
-	INIT_LIST_HEAD(&rxf->ucast_pending_del_q);
-	rxf->ucast_pending_set = 0;
-	INIT_LIST_HEAD(&rxf->ucast_active_q);
-	rxf->ucast_active_mac = NULL;
-
-	INIT_LIST_HEAD(&rxf->mcast_pending_add_q);
-	INIT_LIST_HEAD(&rxf->mcast_pending_del_q);
-	INIT_LIST_HEAD(&rxf->mcast_active_q);
-
-	bfa_q_qe_init(&rxf->mbox_qe.qe);
-
-	if (q_config->vlan_strip_status == BNA_STATUS_T_ENABLED)
-		rxf->ctrl_flags |= BNA_RXF_CF_VLAN_STRIP;
-
-	rxf->rxf_oper_state = (q_config->paused) ?
-		BNA_RXF_OPER_STATE_PAUSED : BNA_RXF_OPER_STATE_RUNNING;
-
-	bna_rxf_adv_init(rxf, rx, q_config);
-
-	rxf->rit_segment = bna_rit_mod_seg_get(&rxf->rx->bna->rit_mod,
-					q_config->num_paths);
-
-	list_for_each(qe, &rx->rxp_q) {
-		rxp = (struct bna_rxp *)qe;
-		if (q_config->rxp_type == BNA_RXP_SINGLE)
-			rxf->mcast_rxq_id = rxp->rxq.single.only->rxq_id;
-		else
-			rxf->mcast_rxq_id = rxp->rxq.slr.large->rxq_id;
-		break;
-	}
-
-	rxf->vlan_filter_status = BNA_STATUS_T_DISABLED;
-	memset(rxf->vlan_filter_table, 0,
-			(sizeof(u32) * ((BFI_MAX_VLAN + 1) / 32)));
-
-	/* Set up VLAN 0 for pure priority tagged packets */
-	rxf->vlan_filter_table[0] |= 1;
-
-	bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
-}
-
-static void
-bna_rxf_uninit(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-	struct bna_mac *mac;
-
-	bna_rit_mod_seg_put(&rxf->rx->bna->rit_mod, rxf->rit_segment);
-	rxf->rit_segment = NULL;
-
-	rxf->ucast_pending_set = 0;
-
-	while (!list_empty(&rxf->ucast_pending_add_q)) {
-		bfa_q_deq(&rxf->ucast_pending_add_q, &mac);
-		bfa_q_qe_init(&mac->qe);
-		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
-	}
-
-	if (rxf->ucast_active_mac) {
-		bfa_q_qe_init(&rxf->ucast_active_mac->qe);
-		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod,
-			rxf->ucast_active_mac);
-		rxf->ucast_active_mac = NULL;
-	}
-
-	while (!list_empty(&rxf->mcast_pending_add_q)) {
-		bfa_q_deq(&rxf->mcast_pending_add_q, &mac);
-		bfa_q_qe_init(&mac->qe);
-		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
-	}
-
-	/* Turn off pending promisc mode */
-	if (is_promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* system promisc state should be pending */
-		BUG_ON(!(bna->rxf_promisc_id == rxf->rxf_id));
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		 bna->rxf_promisc_id = BFI_MAX_RXF;
-	}
-	/* Promisc mode should not be active */
-	BUG_ON(rxf->rxmode_active & BNA_RXMODE_PROMISC);
-
-	/* Turn off pending all-multi mode */
-	if (is_allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-	}
-	/* Allmulti mode should not be active */
-	BUG_ON(rxf->rxmode_active & BNA_RXMODE_ALLMULTI);
-
-	rxf->rx = NULL;
-}
-
-static void
-bna_rx_cb_rxf_started(struct bna_rx *rx, enum bna_cb_status status)
-{
-	bfa_fsm_send_event(rx, RX_E_RXF_STARTED);
-	if (rx->rxf.rxf_id < 32)
-		rx->bna->rx_mod.rxf_bmap[0] |= ((u32)1 << rx->rxf.rxf_id);
-	else
-		rx->bna->rx_mod.rxf_bmap[1] |= ((u32)
-				1 << (rx->rxf.rxf_id - 32));
-}
-
-static void
-bna_rxf_start(struct bna_rxf *rxf)
-{
-	rxf->start_cbfn = bna_rx_cb_rxf_started;
-	rxf->start_cbarg = rxf->rx;
-	rxf->rxf_flags &= ~BNA_RXF_FL_FAILED;
-	bfa_fsm_send_event(rxf, RXF_E_START);
-}
-
-static void
-bna_rx_cb_rxf_stopped(struct bna_rx *rx, enum bna_cb_status status)
-{
-	bfa_fsm_send_event(rx, RX_E_RXF_STOPPED);
-	if (rx->rxf.rxf_id < 32)
-		rx->bna->rx_mod.rxf_bmap[0] &= ~(u32)1 << rx->rxf.rxf_id;
-	else
-		rx->bna->rx_mod.rxf_bmap[1] &= ~(u32)
-				1 << (rx->rxf.rxf_id - 32);
-}
-
-static void
-bna_rxf_stop(struct bna_rxf *rxf)
-{
-	rxf->stop_cbfn = bna_rx_cb_rxf_stopped;
-	rxf->stop_cbarg = rxf->rx;
-	bfa_fsm_send_event(rxf, RXF_E_STOP);
-}
-
-static void
-bna_rxf_fail(struct bna_rxf *rxf)
-{
-	rxf->rxf_flags |= BNA_RXF_FL_FAILED;
-	bfa_fsm_send_event(rxf, RXF_E_FAIL);
-}
-
-int
-bna_rxf_state_get(struct bna_rxf *rxf)
-{
-	return bfa_sm_to_state(rxf_sm_table, rxf->fsm);
-}
-
-enum bna_cb_status
-bna_rx_ucast_set(struct bna_rx *rx, u8 *ucmac,
-		 void (*cbfn)(struct bnad *, struct bna_rx *,
-			      enum bna_cb_status))
-{
-	struct bna_rxf *rxf = &rx->rxf;
-
-	if (rxf->ucast_active_mac == NULL) {
-		rxf->ucast_active_mac =
-				bna_ucam_mod_mac_get(&rxf->rx->bna->ucam_mod);
-		if (rxf->ucast_active_mac == NULL)
-			return BNA_CB_UCAST_CAM_FULL;
-		bfa_q_qe_init(&rxf->ucast_active_mac->qe);
-	}
-
-	memcpy(rxf->ucast_active_mac->addr, ucmac, ETH_ALEN);
-	rxf->ucast_pending_set++;
-	rxf->cam_fltr_cbfn = cbfn;
-	rxf->cam_fltr_cbarg = rx->bna->bnad;
-
-	bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-
-	return BNA_CB_SUCCESS;
-}
-
-enum bna_cb_status
-bna_rx_mcast_add(struct bna_rx *rx, u8 *addr,
-		 void (*cbfn)(struct bnad *, struct bna_rx *,
-			      enum bna_cb_status))
-{
-	struct bna_rxf *rxf = &rx->rxf;
-	struct list_head	*qe;
-	struct bna_mac *mac;
-
-	/* Check if already added */
-	list_for_each(qe, &rxf->mcast_active_q) {
-		mac = (struct bna_mac *)qe;
-		if (BNA_MAC_IS_EQUAL(mac->addr, addr)) {
-			if (cbfn)
-				(*cbfn)(rx->bna->bnad, rx, BNA_CB_SUCCESS);
-			return BNA_CB_SUCCESS;
-		}
-	}
-
-	/* Check if pending addition */
-	list_for_each(qe, &rxf->mcast_pending_add_q) {
-		mac = (struct bna_mac *)qe;
-		if (BNA_MAC_IS_EQUAL(mac->addr, addr)) {
-			if (cbfn)
-				(*cbfn)(rx->bna->bnad, rx, BNA_CB_SUCCESS);
-			return BNA_CB_SUCCESS;
-		}
-	}
-
-	mac = bna_mcam_mod_mac_get(&rxf->rx->bna->mcam_mod);
-	if (mac == NULL)
-		return BNA_CB_MCAST_LIST_FULL;
-	bfa_q_qe_init(&mac->qe);
-	memcpy(mac->addr, addr, ETH_ALEN);
-	list_add_tail(&mac->qe, &rxf->mcast_pending_add_q);
-
-	rxf->cam_fltr_cbfn = cbfn;
-	rxf->cam_fltr_cbarg = rx->bna->bnad;
-
-	bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-
-	return BNA_CB_SUCCESS;
-}
-
-enum bna_cb_status
-bna_rx_mcast_listset(struct bna_rx *rx, int count, u8 *mclist,
-		     void (*cbfn)(struct bnad *, struct bna_rx *,
-				  enum bna_cb_status))
-{
-	struct bna_rxf *rxf = &rx->rxf;
-	struct list_head list_head;
-	struct list_head *qe;
-	u8 *mcaddr;
-	struct bna_mac *mac;
-	struct bna_mac *mac1;
-	int skip;
-	int delete;
-	int need_hw_config = 0;
-	int i;
-
-	/* Allocate nodes */
-	INIT_LIST_HEAD(&list_head);
-	for (i = 0, mcaddr = mclist; i < count; i++) {
-		mac = bna_mcam_mod_mac_get(&rxf->rx->bna->mcam_mod);
-		if (mac == NULL)
-			goto err_return;
-		bfa_q_qe_init(&mac->qe);
-		memcpy(mac->addr, mcaddr, ETH_ALEN);
-		list_add_tail(&mac->qe, &list_head);
-
-		mcaddr += ETH_ALEN;
-	}
-
-	/* Schedule for addition */
-	while (!list_empty(&list_head)) {
-		bfa_q_deq(&list_head, &qe);
-		mac = (struct bna_mac *)qe;
-		bfa_q_qe_init(&mac->qe);
-
-		skip = 0;
-
-		/* Skip if already added */
-		list_for_each(qe, &rxf->mcast_active_q) {
-			mac1 = (struct bna_mac *)qe;
-			if (BNA_MAC_IS_EQUAL(mac1->addr, mac->addr)) {
-				bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod,
-							mac);
-				skip = 1;
-				break;
-			}
-		}
-
-		if (skip)
-			continue;
-
-		/* Skip if pending addition */
-		list_for_each(qe, &rxf->mcast_pending_add_q) {
-			mac1 = (struct bna_mac *)qe;
-			if (BNA_MAC_IS_EQUAL(mac1->addr, mac->addr)) {
-				bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod,
-							mac);
-				skip = 1;
-				break;
-			}
-		}
-
-		if (skip)
-			continue;
-
-		need_hw_config = 1;
-		list_add_tail(&mac->qe, &rxf->mcast_pending_add_q);
-	}
-
-	/**
-	 * Delete the entries that are in the pending_add_q but not
-	 * in the new list
-	 */
-	while (!list_empty(&rxf->mcast_pending_add_q)) {
-		bfa_q_deq(&rxf->mcast_pending_add_q, &qe);
-		mac = (struct bna_mac *)qe;
-		bfa_q_qe_init(&mac->qe);
-		for (i = 0, mcaddr = mclist, delete = 1; i < count; i++) {
-			if (BNA_MAC_IS_EQUAL(mcaddr, mac->addr)) {
-				delete = 0;
-				break;
-			}
-			mcaddr += ETH_ALEN;
-		}
-		if (delete)
-			bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
-		else
-			list_add_tail(&mac->qe, &list_head);
-	}
-	while (!list_empty(&list_head)) {
-		bfa_q_deq(&list_head, &qe);
-		mac = (struct bna_mac *)qe;
-		bfa_q_qe_init(&mac->qe);
-		list_add_tail(&mac->qe, &rxf->mcast_pending_add_q);
-	}
-
-	/**
-	 * Schedule entries for deletion that are in the active_q but not
-	 * in the new list
-	 */
-	while (!list_empty(&rxf->mcast_active_q)) {
-		bfa_q_deq(&rxf->mcast_active_q, &qe);
-		mac = (struct bna_mac *)qe;
-		bfa_q_qe_init(&mac->qe);
-		for (i = 0, mcaddr = mclist, delete = 1; i < count; i++) {
-			if (BNA_MAC_IS_EQUAL(mcaddr, mac->addr)) {
-				delete = 0;
-				break;
-			}
-			mcaddr += ETH_ALEN;
-		}
-		if (delete) {
-			list_add_tail(&mac->qe, &rxf->mcast_pending_del_q);
-			need_hw_config = 1;
-		} else {
-			list_add_tail(&mac->qe, &list_head);
-		}
-	}
-	while (!list_empty(&list_head)) {
-		bfa_q_deq(&list_head, &qe);
-		mac = (struct bna_mac *)qe;
-		bfa_q_qe_init(&mac->qe);
-		list_add_tail(&mac->qe, &rxf->mcast_active_q);
-	}
-
-	if (need_hw_config) {
-		rxf->cam_fltr_cbfn = cbfn;
-		rxf->cam_fltr_cbarg = rx->bna->bnad;
-		bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-	} else if (cbfn)
-		(*cbfn)(rx->bna->bnad, rx, BNA_CB_SUCCESS);
-
-	return BNA_CB_SUCCESS;
-
-err_return:
-	while (!list_empty(&list_head)) {
-		bfa_q_deq(&list_head, &qe);
-		mac = (struct bna_mac *)qe;
-		bfa_q_qe_init(&mac->qe);
-		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
-	}
-
-	return BNA_CB_MCAST_LIST_FULL;
-}
-
-void
-bna_rx_vlan_add(struct bna_rx *rx, int vlan_id)
-{
-	struct bna_rxf *rxf = &rx->rxf;
-	int index = (vlan_id >> 5);
-	int bit = (1 << (vlan_id & 0x1F));
-
-	rxf->vlan_filter_table[index] |= bit;
-	if (rxf->vlan_filter_status == BNA_STATUS_T_ENABLED) {
-		rxf->rxf_flags |= BNA_RXF_FL_VLAN_CONFIG_PENDING;
-		bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-	}
-}
-
-void
-bna_rx_vlan_del(struct bna_rx *rx, int vlan_id)
-{
-	struct bna_rxf *rxf = &rx->rxf;
-	int index = (vlan_id >> 5);
-	int bit = (1 << (vlan_id & 0x1F));
-
-	rxf->vlan_filter_table[index] &= ~bit;
-	if (rxf->vlan_filter_status == BNA_STATUS_T_ENABLED) {
-		rxf->rxf_flags |= BNA_RXF_FL_VLAN_CONFIG_PENDING;
-		bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-	}
-}
-
-/**
- * RX
- */
-#define	RXQ_RCB_INIT(q, rxp, qdepth, bna, _id, unmapq_mem)	do {	\
-	struct bna_doorbell_qset *_qset;				\
-	unsigned long off;						\
-	(q)->rcb->producer_index = (q)->rcb->consumer_index = 0;	\
-	(q)->rcb->q_depth = (qdepth);					\
-	(q)->rcb->unmap_q = unmapq_mem;					\
-	(q)->rcb->rxq = (q);						\
-	(q)->rcb->cq = &(rxp)->cq;					\
-	(q)->rcb->bnad = (bna)->bnad;					\
-	_qset = (struct bna_doorbell_qset *)0;			\
-	off = (unsigned long)&_qset[(q)->rxq_id].rxq[0];		\
-	(q)->rcb->q_dbell = off +					\
-		BNA_GET_DOORBELL_BASE_ADDR((bna)->pcidev.pci_bar_kva);	\
-	(q)->rcb->id = _id;						\
-} while (0)
-
-#define	BNA_GET_RXQS(qcfg)	(((qcfg)->rxp_type == BNA_RXP_SINGLE) ?	\
-	(qcfg)->num_paths : ((qcfg)->num_paths * 2))
-
-#define	SIZE_TO_PAGES(size)	(((size) >> PAGE_SHIFT) + ((((size) &\
-	(PAGE_SIZE - 1)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT))
-
-#define	call_rx_stop_callback(rx, status)				\
-	if ((rx)->stop_cbfn) {						\
-		(*(rx)->stop_cbfn)((rx)->stop_cbarg, rx, (status));	\
-		(rx)->stop_cbfn = NULL;					\
-		(rx)->stop_cbarg = NULL;				\
-	}
-
-/*
- * Since rx_enable is synchronous callback, there is no start_cbfn required.
- * Instead, we'll call bnad_rx_post(rxp) so that bnad can post the buffers
- * for each rxpath.
- */
-
-#define	call_rx_disable_cbfn(rx, status)				\
-		if ((rx)->disable_cbfn)	{				\
-			(*(rx)->disable_cbfn)((rx)->disable_cbarg,	\
-					status);			\
-			(rx)->disable_cbfn = NULL;			\
-			(rx)->disable_cbarg = NULL;			\
-		}							\
-
-#define	rxqs_reqd(type, num_rxqs)					\
-	(((type) == BNA_RXP_SINGLE) ? (num_rxqs) : ((num_rxqs) * 2))
-
-#define rx_ib_fail(rx)						\
-do {								\
-	struct bna_rxp *rxp;					\
-	struct list_head *qe;						\
-	list_for_each(qe, &(rx)->rxp_q) {				\
-		rxp = (struct bna_rxp *)qe;			\
-		bna_ib_fail(rxp->cq.ib);			\
-	}							\
-} while (0)
-
-static void __bna_multi_rxq_stop(struct bna_rxp *, u32 *);
-static void __bna_rxq_start(struct bna_rxq *rxq);
-static void __bna_cq_start(struct bna_cq *cq);
-static void bna_rit_create(struct bna_rx *rx);
-static void bna_rx_cb_multi_rxq_stopped(void *arg, int status);
-static void bna_rx_cb_rxq_stopped_all(void *arg);
-
-bfa_fsm_state_decl(bna_rx, stopped,
-	struct bna_rx, enum bna_rx_event);
-bfa_fsm_state_decl(bna_rx, rxf_start_wait,
-	struct bna_rx, enum bna_rx_event);
-bfa_fsm_state_decl(bna_rx, started,
-	struct bna_rx, enum bna_rx_event);
-bfa_fsm_state_decl(bna_rx, rxf_stop_wait,
-	struct bna_rx, enum bna_rx_event);
-bfa_fsm_state_decl(bna_rx, rxq_stop_wait,
-	struct bna_rx, enum bna_rx_event);
-
-static const struct bfa_sm_table rx_sm_table[] = {
-	{BFA_SM(bna_rx_sm_stopped), BNA_RX_STOPPED},
-	{BFA_SM(bna_rx_sm_rxf_start_wait), BNA_RX_RXF_START_WAIT},
-	{BFA_SM(bna_rx_sm_started), BNA_RX_STARTED},
-	{BFA_SM(bna_rx_sm_rxf_stop_wait), BNA_RX_RXF_STOP_WAIT},
-	{BFA_SM(bna_rx_sm_rxq_stop_wait), BNA_RX_RXQ_STOP_WAIT},
-};
-
-static void bna_rx_sm_stopped_entry(struct bna_rx *rx)
-{
-	struct bna_rxp *rxp;
-	struct list_head *qe_rxp;
-
-	list_for_each(qe_rxp, &rx->rxp_q) {
-		rxp = (struct bna_rxp *)qe_rxp;
-		rx->rx_cleanup_cbfn(rx->bna->bnad, rxp->cq.ccb);
-	}
-
-	call_rx_stop_callback(rx, BNA_CB_SUCCESS);
-}
-
-static void bna_rx_sm_stopped(struct bna_rx *rx,
-				enum bna_rx_event event)
-{
-	switch (event) {
-	case RX_E_START:
-		bfa_fsm_set_state(rx, bna_rx_sm_rxf_start_wait);
-		break;
-	case RX_E_STOP:
-		call_rx_stop_callback(rx, BNA_CB_SUCCESS);
-		break;
-	case RX_E_FAIL:
-		/* no-op */
-		break;
-	default:
-		bfa_sm_fault(event);
-		break;
-	}
-
-}
-
-static void bna_rx_sm_rxf_start_wait_entry(struct bna_rx *rx)
-{
-	struct bna_rxp *rxp;
-	struct list_head *qe_rxp;
-	struct bna_rxq *q0 = NULL, *q1 = NULL;
-
-	/* Setup the RIT */
-	bna_rit_create(rx);
-
-	list_for_each(qe_rxp, &rx->rxp_q) {
-		rxp = (struct bna_rxp *)qe_rxp;
-		bna_ib_start(rxp->cq.ib);
-		GET_RXQS(rxp, q0, q1);
-		q0->buffer_size = bna_port_mtu_get(&rx->bna->port);
-		__bna_rxq_start(q0);
-		rx->rx_post_cbfn(rx->bna->bnad, q0->rcb);
-		if (q1)  {
-			__bna_rxq_start(q1);
-			rx->rx_post_cbfn(rx->bna->bnad, q1->rcb);
-		}
-		__bna_cq_start(&rxp->cq);
-	}
-
-	bna_rxf_start(&rx->rxf);
-}
-
-static void bna_rx_sm_rxf_start_wait(struct bna_rx *rx,
-				enum bna_rx_event event)
-{
-	switch (event) {
-	case RX_E_STOP:
-		bfa_fsm_set_state(rx, bna_rx_sm_rxf_stop_wait);
-		break;
-	case RX_E_FAIL:
-		bfa_fsm_set_state(rx, bna_rx_sm_stopped);
-		rx_ib_fail(rx);
-		bna_rxf_fail(&rx->rxf);
-		break;
-	case RX_E_RXF_STARTED:
-		bfa_fsm_set_state(rx, bna_rx_sm_started);
-		break;
-	default:
-		bfa_sm_fault(event);
-		break;
-	}
-}
-
-void
-bna_rx_sm_started_entry(struct bna_rx *rx)
-{
-	struct bna_rxp *rxp;
-	struct list_head *qe_rxp;
-
-	/* Start IB */
-	list_for_each(qe_rxp, &rx->rxp_q) {
-		rxp = (struct bna_rxp *)qe_rxp;
-		bna_ib_ack(&rxp->cq.ib->door_bell, 0);
-	}
-
-	bna_llport_rx_started(&rx->bna->port.llport);
-}
-
-void
-bna_rx_sm_started(struct bna_rx *rx, enum bna_rx_event event)
-{
-	switch (event) {
-	case RX_E_FAIL:
-		bna_llport_rx_stopped(&rx->bna->port.llport);
-		bfa_fsm_set_state(rx, bna_rx_sm_stopped);
-		rx_ib_fail(rx);
-		bna_rxf_fail(&rx->rxf);
-		break;
-	case RX_E_STOP:
-		bna_llport_rx_stopped(&rx->bna->port.llport);
-		bfa_fsm_set_state(rx, bna_rx_sm_rxf_stop_wait);
-		break;
-	default:
-		bfa_sm_fault(event);
-		break;
-	}
-}
-
-void
-bna_rx_sm_rxf_stop_wait_entry(struct bna_rx *rx)
-{
-	bna_rxf_stop(&rx->rxf);
-}
-
-void
-bna_rx_sm_rxf_stop_wait(struct bna_rx *rx, enum bna_rx_event event)
-{
-	switch (event) {
-	case RX_E_RXF_STOPPED:
-		bfa_fsm_set_state(rx, bna_rx_sm_rxq_stop_wait);
-		break;
-	case RX_E_RXF_STARTED:
-		/**
-		 * RxF was in the process of starting up when
-		 * RXF_E_STOP was issued. Ignore this event
-		 */
-		break;
-	case RX_E_FAIL:
-		bfa_fsm_set_state(rx, bna_rx_sm_stopped);
-		rx_ib_fail(rx);
-		bna_rxf_fail(&rx->rxf);
-		break;
-	default:
-		bfa_sm_fault(event);
-		break;
-	}
-
-}
-
-void
-bna_rx_sm_rxq_stop_wait_entry(struct bna_rx *rx)
-{
-	struct bna_rxp *rxp = NULL;
-	struct bna_rxq *q0 = NULL;
-	struct bna_rxq *q1 = NULL;
-	struct list_head	*qe;
-	u32 rxq_mask[2] = {0, 0};
-
-	/* Only one call to multi-rxq-stop for all RXPs in this RX */
-	bfa_wc_up(&rx->rxq_stop_wc);
-	list_for_each(qe, &rx->rxp_q) {
-		rxp = (struct bna_rxp *)qe;
-		GET_RXQS(rxp, q0, q1);
-		if (q0->rxq_id < 32)
-			rxq_mask[0] |= ((u32)1 << q0->rxq_id);
-		else
-			rxq_mask[1] |= ((u32)1 << (q0->rxq_id - 32));
-		if (q1) {
-			if (q1->rxq_id < 32)
-				rxq_mask[0] |= ((u32)1 << q1->rxq_id);
-			else
-				rxq_mask[1] |= ((u32)
-						1 << (q1->rxq_id - 32));
-		}
-	}
-
-	__bna_multi_rxq_stop(rxp, rxq_mask);
-}
-
-void
-bna_rx_sm_rxq_stop_wait(struct bna_rx *rx, enum bna_rx_event event)
-{
-	struct bna_rxp *rxp = NULL;
-	struct list_head	*qe;
-
-	switch (event) {
-	case RX_E_RXQ_STOPPED:
-		list_for_each(qe, &rx->rxp_q) {
-			rxp = (struct bna_rxp *)qe;
-			bna_ib_stop(rxp->cq.ib);
-		}
-		/* Fall through */
-	case RX_E_FAIL:
-		bfa_fsm_set_state(rx, bna_rx_sm_stopped);
-		break;
-	default:
-		bfa_sm_fault(event);
-		break;
-	}
-}
-
-void
-__bna_multi_rxq_stop(struct bna_rxp *rxp, u32 * rxq_id_mask)
-{
-	struct bfi_ll_q_stop_req ll_req;
-
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_RXQ_STOP_REQ, 0);
-	ll_req.q_id_mask[0] = htonl(rxq_id_mask[0]);
-	ll_req.q_id_mask[1] = htonl(rxq_id_mask[1]);
-	bna_mbox_qe_fill(&rxp->mbox_qe, &ll_req, sizeof(ll_req),
-		bna_rx_cb_multi_rxq_stopped, rxp);
-	bna_mbox_send(rxp->rx->bna, &rxp->mbox_qe);
-}
-
-void
-__bna_rxq_start(struct bna_rxq *rxq)
-{
-	struct bna_rxtx_q_mem *q_mem;
-	struct bna_rxq_mem rxq_cfg, *rxq_mem;
-	struct bna_dma_addr cur_q_addr;
-	/* struct bna_doorbell_qset *qset; */
-	struct bna_qpt *qpt;
-	u32 pg_num;
-	struct bna *bna = rxq->rx->bna;
-	void __iomem *base_addr;
-	unsigned long off;
-
-	qpt = &rxq->qpt;
-	cur_q_addr = *((struct bna_dma_addr *)(qpt->kv_qpt_ptr));
-
-	rxq_cfg.pg_tbl_addr_lo = qpt->hw_qpt_ptr.lsb;
-	rxq_cfg.pg_tbl_addr_hi = qpt->hw_qpt_ptr.msb;
-	rxq_cfg.cur_q_entry_lo = cur_q_addr.lsb;
-	rxq_cfg.cur_q_entry_hi = cur_q_addr.msb;
-
-	rxq_cfg.pg_cnt_n_prd_ptr = ((u32)qpt->page_count << 16) | 0x0;
-	rxq_cfg.entry_n_pg_size = ((u32)(BFI_RXQ_WI_SIZE >> 2) << 16) |
-		(qpt->page_size >> 2);
-	rxq_cfg.sg_n_cq_n_cns_ptr =
-		((u32)(rxq->rxp->cq.cq_id & 0xff) << 16) | 0x0;
-	rxq_cfg.buf_sz_n_q_state = ((u32)rxq->buffer_size << 16) |
-		BNA_Q_IDLE_STATE;
-	rxq_cfg.next_qid = 0x0 | (0x3 << 8);
-
-	/* Write the page number register */
-	pg_num = BNA_GET_PAGE_NUM(HQM0_BLK_PG_NUM + bna->port_num,
-			HQM_RXTX_Q_RAM_BASE_OFFSET);
-	writel(pg_num, bna->regs.page_addr);
-
-	/* Write to h/w */
-	base_addr = BNA_GET_MEM_BASE_ADDR(bna->pcidev.pci_bar_kva,
-					HQM_RXTX_Q_RAM_BASE_OFFSET);
-
-	q_mem = (struct bna_rxtx_q_mem *)0;
-	rxq_mem = &q_mem[rxq->rxq_id].rxq;
-
-	off = (unsigned long)&rxq_mem->pg_tbl_addr_lo;
-	writel(htonl(rxq_cfg.pg_tbl_addr_lo), base_addr + off);
-
-	off = (unsigned long)&rxq_mem->pg_tbl_addr_hi;
-	writel(htonl(rxq_cfg.pg_tbl_addr_hi), base_addr + off);
-
-	off = (unsigned long)&rxq_mem->cur_q_entry_lo;
-	writel(htonl(rxq_cfg.cur_q_entry_lo), base_addr + off);
-
-	off = (unsigned long)&rxq_mem->cur_q_entry_hi;
-	writel(htonl(rxq_cfg.cur_q_entry_hi), base_addr + off);
-
-	off = (unsigned long)&rxq_mem->pg_cnt_n_prd_ptr;
-	writel(rxq_cfg.pg_cnt_n_prd_ptr, base_addr + off);
-
-	off = (unsigned long)&rxq_mem->entry_n_pg_size;
-	writel(rxq_cfg.entry_n_pg_size, base_addr + off);
-
-	off = (unsigned long)&rxq_mem->sg_n_cq_n_cns_ptr;
-	writel(rxq_cfg.sg_n_cq_n_cns_ptr, base_addr + off);
-
-	off = (unsigned long)&rxq_mem->buf_sz_n_q_state;
-	writel(rxq_cfg.buf_sz_n_q_state, base_addr + off);
-
-	off = (unsigned long)&rxq_mem->next_qid;
-	writel(rxq_cfg.next_qid, base_addr + off);
-
-	rxq->rcb->producer_index = 0;
-	rxq->rcb->consumer_index = 0;
-}
-
-void
-__bna_cq_start(struct bna_cq *cq)
-{
-	struct bna_cq_mem cq_cfg, *cq_mem;
-	const struct bna_qpt *qpt;
-	struct bna_dma_addr cur_q_addr;
-	u32 pg_num;
-	struct bna *bna = cq->rx->bna;
-	void __iomem *base_addr;
-	unsigned long off;
-
-	qpt = &cq->qpt;
-	cur_q_addr = *((struct bna_dma_addr *)(qpt->kv_qpt_ptr));
-
-	/*
-	 * Fill out structure, to be subsequently written
-	 * to hardware
-	 */
-	cq_cfg.pg_tbl_addr_lo = qpt->hw_qpt_ptr.lsb;
-	cq_cfg.pg_tbl_addr_hi = qpt->hw_qpt_ptr.msb;
-	cq_cfg.cur_q_entry_lo = cur_q_addr.lsb;
-	cq_cfg.cur_q_entry_hi = cur_q_addr.msb;
-
-	cq_cfg.pg_cnt_n_prd_ptr = (qpt->page_count << 16) | 0x0;
-	cq_cfg.entry_n_pg_size =
-		((u32)(BFI_CQ_WI_SIZE >> 2) << 16) | (qpt->page_size >> 2);
-	cq_cfg.int_blk_n_cns_ptr = ((((u32)cq->ib_seg_offset) << 24) |
-			((u32)(cq->ib->ib_id & 0xff)  << 16) | 0x0);
-	cq_cfg.q_state = BNA_Q_IDLE_STATE;
-
-	/* Write the page number register */
-	pg_num = BNA_GET_PAGE_NUM(HQM0_BLK_PG_NUM + bna->port_num,
-				  HQM_CQ_RAM_BASE_OFFSET);
-
-	writel(pg_num, bna->regs.page_addr);
-
-	/* H/W write */
-	base_addr = BNA_GET_MEM_BASE_ADDR(bna->pcidev.pci_bar_kva,
-					HQM_CQ_RAM_BASE_OFFSET);
-
-	cq_mem = (struct bna_cq_mem *)0;
-
-	off = (unsigned long)&cq_mem[cq->cq_id].pg_tbl_addr_lo;
-	writel(htonl(cq_cfg.pg_tbl_addr_lo), base_addr + off);
-
-	off = (unsigned long)&cq_mem[cq->cq_id].pg_tbl_addr_hi;
-	writel(htonl(cq_cfg.pg_tbl_addr_hi), base_addr + off);
-
-	off = (unsigned long)&cq_mem[cq->cq_id].cur_q_entry_lo;
-	writel(htonl(cq_cfg.cur_q_entry_lo), base_addr + off);
-
-	off = (unsigned long)&cq_mem[cq->cq_id].cur_q_entry_hi;
-	writel(htonl(cq_cfg.cur_q_entry_hi), base_addr + off);
-
-	off = (unsigned long)&cq_mem[cq->cq_id].pg_cnt_n_prd_ptr;
-	writel(cq_cfg.pg_cnt_n_prd_ptr, base_addr + off);
-
-	off = (unsigned long)&cq_mem[cq->cq_id].entry_n_pg_size;
-	writel(cq_cfg.entry_n_pg_size, base_addr + off);
-
-	off = (unsigned long)&cq_mem[cq->cq_id].int_blk_n_cns_ptr;
-	writel(cq_cfg.int_blk_n_cns_ptr, base_addr + off);
-
-	off = (unsigned long)&cq_mem[cq->cq_id].q_state;
-	writel(cq_cfg.q_state, base_addr + off);
-
-	cq->ccb->producer_index = 0;
-	*(cq->ccb->hw_producer_index) = 0;
-}
-
-void
-bna_rit_create(struct bna_rx *rx)
-{
-	struct list_head	*qe_rxp;
-	struct bna_rxp *rxp;
-	struct bna_rxq *q0 = NULL;
-	struct bna_rxq *q1 = NULL;
-	int offset;
-
-	offset = 0;
-	list_for_each(qe_rxp, &rx->rxp_q) {
-		rxp = (struct bna_rxp *)qe_rxp;
-		GET_RXQS(rxp, q0, q1);
-		rx->rxf.rit_segment->rit[offset].large_rxq_id = q0->rxq_id;
-		rx->rxf.rit_segment->rit[offset].small_rxq_id =
-						(q1 ? q1->rxq_id : 0);
-		offset++;
-	}
-}
-
-static int
-_rx_can_satisfy(struct bna_rx_mod *rx_mod,
-		struct bna_rx_config *rx_cfg)
-{
-	if ((rx_mod->rx_free_count == 0) ||
-		(rx_mod->rxp_free_count == 0) ||
-		(rx_mod->rxq_free_count == 0))
-		return 0;
-
-	if (rx_cfg->rxp_type == BNA_RXP_SINGLE) {
-		if ((rx_mod->rxp_free_count < rx_cfg->num_paths) ||
-			(rx_mod->rxq_free_count < rx_cfg->num_paths))
-				return 0;
-	} else {
-		if ((rx_mod->rxp_free_count < rx_cfg->num_paths) ||
-			(rx_mod->rxq_free_count < (2 * rx_cfg->num_paths)))
-			return 0;
-	}
-
-	if (!bna_rit_mod_can_satisfy(&rx_mod->bna->rit_mod, rx_cfg->num_paths))
-		return 0;
-
-	return 1;
-}
-
-static struct bna_rxq *
-_get_free_rxq(struct bna_rx_mod *rx_mod)
-{
-	struct bna_rxq *rxq = NULL;
-	struct list_head	*qe = NULL;
-
-	bfa_q_deq(&rx_mod->rxq_free_q, &qe);
-	if (qe) {
-		rx_mod->rxq_free_count--;
-		rxq = (struct bna_rxq *)qe;
-	}
-	return rxq;
-}
-
-static void
-_put_free_rxq(struct bna_rx_mod *rx_mod, struct bna_rxq *rxq)
-{
-	bfa_q_qe_init(&rxq->qe);
-	list_add_tail(&rxq->qe, &rx_mod->rxq_free_q);
-	rx_mod->rxq_free_count++;
-}
-
-static struct bna_rxp *
-_get_free_rxp(struct bna_rx_mod *rx_mod)
-{
-	struct list_head	*qe = NULL;
-	struct bna_rxp *rxp = NULL;
-
-	bfa_q_deq(&rx_mod->rxp_free_q, &qe);
-	if (qe) {
-		rx_mod->rxp_free_count--;
-
-		rxp = (struct bna_rxp *)qe;
-	}
-
-	return rxp;
-}
-
-static void
-_put_free_rxp(struct bna_rx_mod *rx_mod, struct bna_rxp *rxp)
-{
-	bfa_q_qe_init(&rxp->qe);
-	list_add_tail(&rxp->qe, &rx_mod->rxp_free_q);
-	rx_mod->rxp_free_count++;
-}
-
-static struct bna_rx *
-_get_free_rx(struct bna_rx_mod *rx_mod)
-{
-	struct list_head	*qe = NULL;
-	struct bna_rx *rx = NULL;
-
-	bfa_q_deq(&rx_mod->rx_free_q, &qe);
-	if (qe) {
-		rx_mod->rx_free_count--;
-
-		rx = (struct bna_rx *)qe;
-		bfa_q_qe_init(qe);
-		list_add_tail(&rx->qe, &rx_mod->rx_active_q);
-	}
-
-	return rx;
-}
-
-static void
-_put_free_rx(struct bna_rx_mod *rx_mod, struct bna_rx *rx)
-{
-	bfa_q_qe_init(&rx->qe);
-	list_add_tail(&rx->qe, &rx_mod->rx_free_q);
-	rx_mod->rx_free_count++;
-}
-
-static void
-_rx_init(struct bna_rx *rx, struct bna *bna)
-{
-	rx->bna = bna;
-	rx->rx_flags = 0;
-
-	INIT_LIST_HEAD(&rx->rxp_q);
-
-	rx->rxq_stop_wc.wc_resume = bna_rx_cb_rxq_stopped_all;
-	rx->rxq_stop_wc.wc_cbarg = rx;
-	rx->rxq_stop_wc.wc_count = 0;
-
-	rx->stop_cbfn = NULL;
-	rx->stop_cbarg = NULL;
-}
-
-static void
-_rxp_add_rxqs(struct bna_rxp *rxp,
-		struct bna_rxq *q0,
-		struct bna_rxq *q1)
-{
-	switch (rxp->type) {
-	case BNA_RXP_SINGLE:
-		rxp->rxq.single.only = q0;
-		rxp->rxq.single.reserved = NULL;
-		break;
-	case BNA_RXP_SLR:
-		rxp->rxq.slr.large = q0;
-		rxp->rxq.slr.small = q1;
-		break;
-	case BNA_RXP_HDS:
-		rxp->rxq.hds.data = q0;
-		rxp->rxq.hds.hdr = q1;
-		break;
-	default:
-		break;
-	}
-}
-
-static void
-_rxq_qpt_init(struct bna_rxq *rxq,
-		struct bna_rxp *rxp,
-		u32 page_count,
-		u32 page_size,
-		struct bna_mem_descr *qpt_mem,
-		struct bna_mem_descr *swqpt_mem,
-		struct bna_mem_descr *page_mem)
-{
-	int	i;
-
-	rxq->qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
-	rxq->qpt.hw_qpt_ptr.msb = qpt_mem->dma.msb;
-	rxq->qpt.kv_qpt_ptr = qpt_mem->kva;
-	rxq->qpt.page_count = page_count;
-	rxq->qpt.page_size = page_size;
-
-	rxq->rcb->sw_qpt = (void **) swqpt_mem->kva;
-
-	for (i = 0; i < rxq->qpt.page_count; i++) {
-		rxq->rcb->sw_qpt[i] = page_mem[i].kva;
-		((struct bna_dma_addr *)rxq->qpt.kv_qpt_ptr)[i].lsb =
-			page_mem[i].dma.lsb;
-		((struct bna_dma_addr *)rxq->qpt.kv_qpt_ptr)[i].msb =
-			page_mem[i].dma.msb;
-
-	}
-}
-
-static void
-_rxp_cqpt_setup(struct bna_rxp *rxp,
-		u32 page_count,
-		u32 page_size,
-		struct bna_mem_descr *qpt_mem,
-		struct bna_mem_descr *swqpt_mem,
-		struct bna_mem_descr *page_mem)
-{
-	int	i;
-
-	rxp->cq.qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
-	rxp->cq.qpt.hw_qpt_ptr.msb = qpt_mem->dma.msb;
-	rxp->cq.qpt.kv_qpt_ptr = qpt_mem->kva;
-	rxp->cq.qpt.page_count = page_count;
-	rxp->cq.qpt.page_size = page_size;
-
-	rxp->cq.ccb->sw_qpt = (void **) swqpt_mem->kva;
-
-	for (i = 0; i < rxp->cq.qpt.page_count; i++) {
-		rxp->cq.ccb->sw_qpt[i] = page_mem[i].kva;
-
-		((struct bna_dma_addr *)rxp->cq.qpt.kv_qpt_ptr)[i].lsb =
-			page_mem[i].dma.lsb;
-		((struct bna_dma_addr *)rxp->cq.qpt.kv_qpt_ptr)[i].msb =
-			page_mem[i].dma.msb;
-
-	}
-}
-
-static void
-_rx_add_rxp(struct bna_rx *rx, struct bna_rxp *rxp)
-{
-	list_add_tail(&rxp->qe, &rx->rxp_q);
-}
-
-static void
-_init_rxmod_queues(struct bna_rx_mod *rx_mod)
-{
-	INIT_LIST_HEAD(&rx_mod->rx_free_q);
-	INIT_LIST_HEAD(&rx_mod->rxq_free_q);
-	INIT_LIST_HEAD(&rx_mod->rxp_free_q);
-	INIT_LIST_HEAD(&rx_mod->rx_active_q);
-
-	rx_mod->rx_free_count = 0;
-	rx_mod->rxq_free_count = 0;
-	rx_mod->rxp_free_count = 0;
-}
-
-static void
-_rx_ctor(struct bna_rx *rx, int id)
-{
-	bfa_q_qe_init(&rx->qe);
-	INIT_LIST_HEAD(&rx->rxp_q);
-	rx->bna = NULL;
-
-	rx->rxf.rxf_id = id;
-
-	/* FIXME: mbox_qe ctor()?? */
-	bfa_q_qe_init(&rx->mbox_qe.qe);
-
-	rx->stop_cbfn = NULL;
-	rx->stop_cbarg = NULL;
-}
-
-void
-bna_rx_cb_multi_rxq_stopped(void *arg, int status)
-{
-	struct bna_rxp *rxp = (struct bna_rxp *)arg;
-
-	bfa_wc_down(&rxp->rx->rxq_stop_wc);
-}
-
-void
-bna_rx_cb_rxq_stopped_all(void *arg)
-{
-	struct bna_rx *rx = (struct bna_rx *)arg;
-
-	bfa_fsm_send_event(rx, RX_E_RXQ_STOPPED);
-}
-
-static void
-bna_rx_mod_cb_rx_stopped(void *arg, struct bna_rx *rx,
-			 enum bna_cb_status status)
-{
-	struct bna_rx_mod *rx_mod = (struct bna_rx_mod *)arg;
-
-	bfa_wc_down(&rx_mod->rx_stop_wc);
-}
-
-static void
-bna_rx_mod_cb_rx_stopped_all(void *arg)
-{
-	struct bna_rx_mod *rx_mod = (struct bna_rx_mod *)arg;
-
-	if (rx_mod->stop_cbfn)
-		rx_mod->stop_cbfn(&rx_mod->bna->port, BNA_CB_SUCCESS);
-	rx_mod->stop_cbfn = NULL;
-}
-
-static void
-bna_rx_start(struct bna_rx *rx)
-{
-	rx->rx_flags |= BNA_RX_F_PORT_ENABLED;
-	if (rx->rx_flags & BNA_RX_F_ENABLE)
-		bfa_fsm_send_event(rx, RX_E_START);
-}
-
-static void
-bna_rx_stop(struct bna_rx *rx)
-{
-	rx->rx_flags &= ~BNA_RX_F_PORT_ENABLED;
-	if (rx->fsm == (bfa_fsm_t) bna_rx_sm_stopped)
-		bna_rx_mod_cb_rx_stopped(&rx->bna->rx_mod, rx, BNA_CB_SUCCESS);
-	else {
-		rx->stop_cbfn = bna_rx_mod_cb_rx_stopped;
-		rx->stop_cbarg = &rx->bna->rx_mod;
-		bfa_fsm_send_event(rx, RX_E_STOP);
-	}
-}
-
-static void
-bna_rx_fail(struct bna_rx *rx)
-{
-	/* Indicate port is not enabled, and failed */
-	rx->rx_flags &= ~BNA_RX_F_PORT_ENABLED;
-	rx->rx_flags |= BNA_RX_F_PORT_FAILED;
-	bfa_fsm_send_event(rx, RX_E_FAIL);
-}
-
-void
-bna_rx_mod_start(struct bna_rx_mod *rx_mod, enum bna_rx_type type)
-{
-	struct bna_rx *rx;
-	struct list_head *qe;
-
-	rx_mod->flags |= BNA_RX_MOD_F_PORT_STARTED;
-	if (type == BNA_RX_T_LOOPBACK)
-		rx_mod->flags |= BNA_RX_MOD_F_PORT_LOOPBACK;
-
-	list_for_each(qe, &rx_mod->rx_active_q) {
-		rx = (struct bna_rx *)qe;
-		if (rx->type == type)
-			bna_rx_start(rx);
-	}
-}
-
-void
-bna_rx_mod_stop(struct bna_rx_mod *rx_mod, enum bna_rx_type type)
-{
-	struct bna_rx *rx;
-	struct list_head *qe;
-
-	rx_mod->flags &= ~BNA_RX_MOD_F_PORT_STARTED;
-	rx_mod->flags &= ~BNA_RX_MOD_F_PORT_LOOPBACK;
-
-	rx_mod->stop_cbfn = bna_port_cb_rx_stopped;
-
-	/**
-	 * Before calling bna_rx_stop(), increment rx_stop_wc as many times
-	 * as we are going to call bna_rx_stop
-	 */
-	list_for_each(qe, &rx_mod->rx_active_q) {
-		rx = (struct bna_rx *)qe;
-		if (rx->type == type)
-			bfa_wc_up(&rx_mod->rx_stop_wc);
-	}
-
-	if (rx_mod->rx_stop_wc.wc_count == 0) {
-		rx_mod->stop_cbfn(&rx_mod->bna->port, BNA_CB_SUCCESS);
-		rx_mod->stop_cbfn = NULL;
-		return;
-	}
-
-	list_for_each(qe, &rx_mod->rx_active_q) {
-		rx = (struct bna_rx *)qe;
-		if (rx->type == type)
-			bna_rx_stop(rx);
-	}
-}
-
-void
-bna_rx_mod_fail(struct bna_rx_mod *rx_mod)
-{
-	struct bna_rx *rx;
-	struct list_head *qe;
-
-	rx_mod->flags &= ~BNA_RX_MOD_F_PORT_STARTED;
-	rx_mod->flags &= ~BNA_RX_MOD_F_PORT_LOOPBACK;
-
-	list_for_each(qe, &rx_mod->rx_active_q) {
-		rx = (struct bna_rx *)qe;
-		bna_rx_fail(rx);
-	}
-}
-
-void bna_rx_mod_init(struct bna_rx_mod *rx_mod, struct bna *bna,
-			struct bna_res_info *res_info)
-{
-	int	index;
-	struct bna_rx *rx_ptr;
-	struct bna_rxp *rxp_ptr;
-	struct bna_rxq *rxq_ptr;
-
-	rx_mod->bna = bna;
-	rx_mod->flags = 0;
-
-	rx_mod->rx = (struct bna_rx *)
-		res_info[BNA_RES_MEM_T_RX_ARRAY].res_u.mem_info.mdl[0].kva;
-	rx_mod->rxp = (struct bna_rxp *)
-		res_info[BNA_RES_MEM_T_RXP_ARRAY].res_u.mem_info.mdl[0].kva;
-	rx_mod->rxq = (struct bna_rxq *)
-		res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.mdl[0].kva;
-
-	/* Initialize the queues */
-	_init_rxmod_queues(rx_mod);
-
-	/* Build RX queues */
-	for (index = 0; index < BFI_MAX_RXQ; index++) {
-		rx_ptr = &rx_mod->rx[index];
-		_rx_ctor(rx_ptr, index);
-		list_add_tail(&rx_ptr->qe, &rx_mod->rx_free_q);
-		rx_mod->rx_free_count++;
-	}
-
-	/* build RX-path queue */
-	for (index = 0; index < BFI_MAX_RXQ; index++) {
-		rxp_ptr = &rx_mod->rxp[index];
-		rxp_ptr->cq.cq_id = index;
-		bfa_q_qe_init(&rxp_ptr->qe);
-		list_add_tail(&rxp_ptr->qe, &rx_mod->rxp_free_q);
-		rx_mod->rxp_free_count++;
-	}
-
-	/* build RXQ queue */
-	for (index = 0; index < BFI_MAX_RXQ; index++) {
-		rxq_ptr = &rx_mod->rxq[index];
-		rxq_ptr->rxq_id = index;
-
-		bfa_q_qe_init(&rxq_ptr->qe);
-		list_add_tail(&rxq_ptr->qe, &rx_mod->rxq_free_q);
-		rx_mod->rxq_free_count++;
-	}
-
-	rx_mod->rx_stop_wc.wc_resume = bna_rx_mod_cb_rx_stopped_all;
-	rx_mod->rx_stop_wc.wc_cbarg = rx_mod;
-	rx_mod->rx_stop_wc.wc_count = 0;
-}
-
-void
-bna_rx_mod_uninit(struct bna_rx_mod *rx_mod)
-{
-	struct list_head		*qe;
-	int i;
-
-	i = 0;
-	list_for_each(qe, &rx_mod->rx_free_q)
-		i++;
-
-	i = 0;
-	list_for_each(qe, &rx_mod->rxp_free_q)
-		i++;
-
-	i = 0;
-	list_for_each(qe, &rx_mod->rxq_free_q)
-		i++;
-
-	rx_mod->bna = NULL;
-}
-
-int
-bna_rx_state_get(struct bna_rx *rx)
-{
-	return bfa_sm_to_state(rx_sm_table, rx->fsm);
-}
-
-void
-bna_rx_res_req(struct bna_rx_config *q_cfg, struct bna_res_info *res_info)
-{
-	u32 cq_size, hq_size, dq_size;
-	u32 cpage_count, hpage_count, dpage_count;
-	struct bna_mem_info *mem_info;
-	u32 cq_depth;
-	u32 hq_depth;
-	u32 dq_depth;
-
-	dq_depth = q_cfg->q_depth;
-	hq_depth = ((q_cfg->rxp_type == BNA_RXP_SINGLE) ? 0 : q_cfg->q_depth);
-	cq_depth = dq_depth + hq_depth;
-
-	BNA_TO_POWER_OF_2_HIGH(cq_depth);
-	cq_size = cq_depth * BFI_CQ_WI_SIZE;
-	cq_size = ALIGN(cq_size, PAGE_SIZE);
-	cpage_count = SIZE_TO_PAGES(cq_size);
-
-	BNA_TO_POWER_OF_2_HIGH(dq_depth);
-	dq_size = dq_depth * BFI_RXQ_WI_SIZE;
-	dq_size = ALIGN(dq_size, PAGE_SIZE);
-	dpage_count = SIZE_TO_PAGES(dq_size);
-
-	if (BNA_RXP_SINGLE != q_cfg->rxp_type) {
-		BNA_TO_POWER_OF_2_HIGH(hq_depth);
-		hq_size = hq_depth * BFI_RXQ_WI_SIZE;
-		hq_size = ALIGN(hq_size, PAGE_SIZE);
-		hpage_count = SIZE_TO_PAGES(hq_size);
-	} else {
-		hpage_count = 0;
-	}
-
-	/* CCB structures */
-	res_info[BNA_RX_RES_MEM_T_CCB].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_CCB].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_KVA;
-	mem_info->len = sizeof(struct bna_ccb);
-	mem_info->num = q_cfg->num_paths;
-
-	/* RCB structures */
-	res_info[BNA_RX_RES_MEM_T_RCB].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_RCB].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_KVA;
-	mem_info->len = sizeof(struct bna_rcb);
-	mem_info->num = BNA_GET_RXQS(q_cfg);
-
-	/* Completion QPT */
-	res_info[BNA_RX_RES_MEM_T_CQPT].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_CQPT].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_DMA;
-	mem_info->len = cpage_count * sizeof(struct bna_dma_addr);
-	mem_info->num = q_cfg->num_paths;
-
-	/* Completion s/w QPT */
-	res_info[BNA_RX_RES_MEM_T_CSWQPT].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_CSWQPT].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_KVA;
-	mem_info->len = cpage_count * sizeof(void *);
-	mem_info->num = q_cfg->num_paths;
-
-	/* Completion QPT pages */
-	res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_DMA;
-	mem_info->len = PAGE_SIZE;
-	mem_info->num = cpage_count * q_cfg->num_paths;
-
-	/* Data QPTs */
-	res_info[BNA_RX_RES_MEM_T_DQPT].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_DQPT].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_DMA;
-	mem_info->len = dpage_count * sizeof(struct bna_dma_addr);
-	mem_info->num = q_cfg->num_paths;
-
-	/* Data s/w QPTs */
-	res_info[BNA_RX_RES_MEM_T_DSWQPT].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_DSWQPT].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_KVA;
-	mem_info->len = dpage_count * sizeof(void *);
-	mem_info->num = q_cfg->num_paths;
-
-	/* Data QPT pages */
-	res_info[BNA_RX_RES_MEM_T_DPAGE].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_DMA;
-	mem_info->len = PAGE_SIZE;
-	mem_info->num = dpage_count * q_cfg->num_paths;
-
-	/* Hdr QPTs */
-	res_info[BNA_RX_RES_MEM_T_HQPT].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_HQPT].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_DMA;
-	mem_info->len = hpage_count * sizeof(struct bna_dma_addr);
-	mem_info->num = (hpage_count ? q_cfg->num_paths : 0);
-
-	/* Hdr s/w QPTs */
-	res_info[BNA_RX_RES_MEM_T_HSWQPT].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_HSWQPT].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_KVA;
-	mem_info->len = hpage_count * sizeof(void *);
-	mem_info->num = (hpage_count ? q_cfg->num_paths : 0);
-
-	/* Hdr QPT pages */
-	res_info[BNA_RX_RES_MEM_T_HPAGE].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_DMA;
-	mem_info->len = (hpage_count ? PAGE_SIZE : 0);
-	mem_info->num = (hpage_count ? (hpage_count * q_cfg->num_paths) : 0);
-
-	/* RX Interrupts */
-	res_info[BNA_RX_RES_T_INTR].res_type = BNA_RES_T_INTR;
-	res_info[BNA_RX_RES_T_INTR].res_u.intr_info.intr_type = BNA_INTR_T_MSIX;
-	res_info[BNA_RX_RES_T_INTR].res_u.intr_info.num = q_cfg->num_paths;
-}
-
-struct bna_rx *
-bna_rx_create(struct bna *bna, struct bnad *bnad,
-		struct bna_rx_config *rx_cfg,
-		struct bna_rx_event_cbfn *rx_cbfn,
-		struct bna_res_info *res_info,
-		void *priv)
-{
-	struct bna_rx_mod *rx_mod = &bna->rx_mod;
-	struct bna_rx *rx;
-	struct bna_rxp *rxp;
-	struct bna_rxq *q0;
-	struct bna_rxq *q1;
-	struct bna_intr_info *intr_info;
-	u32 page_count;
-	struct bna_mem_descr *ccb_mem;
-	struct bna_mem_descr *rcb_mem;
-	struct bna_mem_descr *unmapq_mem;
-	struct bna_mem_descr *cqpt_mem;
-	struct bna_mem_descr *cswqpt_mem;
-	struct bna_mem_descr *cpage_mem;
-	struct bna_mem_descr *hqpt_mem;	/* Header/Small Q qpt */
-	struct bna_mem_descr *dqpt_mem;	/* Data/Large Q qpt */
-	struct bna_mem_descr *hsqpt_mem;	/* s/w qpt for hdr */
-	struct bna_mem_descr *dsqpt_mem;	/* s/w qpt for data */
-	struct bna_mem_descr *hpage_mem;	/* hdr page mem */
-	struct bna_mem_descr *dpage_mem;	/* data page mem */
-	int i, cpage_idx = 0, dpage_idx = 0, hpage_idx = 0;
-	int dpage_count, hpage_count, rcb_idx;
-	struct bna_ib_config ibcfg;
-	/* Fail if we don't have enough RXPs, RXQs */
-	if (!_rx_can_satisfy(rx_mod, rx_cfg))
-		return NULL;
-
-	/* Initialize resource pointers */
-	intr_info = &res_info[BNA_RX_RES_T_INTR].res_u.intr_info;
-	ccb_mem = &res_info[BNA_RX_RES_MEM_T_CCB].res_u.mem_info.mdl[0];
-	rcb_mem = &res_info[BNA_RX_RES_MEM_T_RCB].res_u.mem_info.mdl[0];
-	unmapq_mem = &res_info[BNA_RX_RES_MEM_T_UNMAPQ].res_u.mem_info.mdl[0];
-	cqpt_mem = &res_info[BNA_RX_RES_MEM_T_CQPT].res_u.mem_info.mdl[0];
-	cswqpt_mem = &res_info[BNA_RX_RES_MEM_T_CSWQPT].res_u.mem_info.mdl[0];
-	cpage_mem = &res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info.mdl[0];
-	hqpt_mem = &res_info[BNA_RX_RES_MEM_T_HQPT].res_u.mem_info.mdl[0];
-	dqpt_mem = &res_info[BNA_RX_RES_MEM_T_DQPT].res_u.mem_info.mdl[0];
-	hsqpt_mem = &res_info[BNA_RX_RES_MEM_T_HSWQPT].res_u.mem_info.mdl[0];
-	dsqpt_mem = &res_info[BNA_RX_RES_MEM_T_DSWQPT].res_u.mem_info.mdl[0];
-	hpage_mem = &res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info.mdl[0];
-	dpage_mem = &res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info.mdl[0];
-
-	/* Compute q depth & page count */
-	page_count = res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info.num /
-			rx_cfg->num_paths;
-
-	dpage_count = res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info.num /
-			rx_cfg->num_paths;
-
-	hpage_count = res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info.num /
-			rx_cfg->num_paths;
-	/* Get RX pointer */
-	rx = _get_free_rx(rx_mod);
-	_rx_init(rx, bna);
-	rx->priv = priv;
-	rx->type = rx_cfg->rx_type;
-
-	rx->rcb_setup_cbfn = rx_cbfn->rcb_setup_cbfn;
-	rx->rcb_destroy_cbfn = rx_cbfn->rcb_destroy_cbfn;
-	rx->ccb_setup_cbfn = rx_cbfn->ccb_setup_cbfn;
-	rx->ccb_destroy_cbfn = rx_cbfn->ccb_destroy_cbfn;
-	/* Following callbacks are mandatory */
-	rx->rx_cleanup_cbfn = rx_cbfn->rx_cleanup_cbfn;
-	rx->rx_post_cbfn = rx_cbfn->rx_post_cbfn;
-
-	if (rx->bna->rx_mod.flags & BNA_RX_MOD_F_PORT_STARTED) {
-		switch (rx->type) {
-		case BNA_RX_T_REGULAR:
-			if (!(rx->bna->rx_mod.flags &
-				BNA_RX_MOD_F_PORT_LOOPBACK))
-				rx->rx_flags |= BNA_RX_F_PORT_ENABLED;
-			break;
-		case BNA_RX_T_LOOPBACK:
-			if (rx->bna->rx_mod.flags & BNA_RX_MOD_F_PORT_LOOPBACK)
-				rx->rx_flags |= BNA_RX_F_PORT_ENABLED;
-			break;
-		}
-	}
-
-	for (i = 0, rcb_idx = 0; i < rx_cfg->num_paths; i++) {
-		rxp = _get_free_rxp(rx_mod);
-		rxp->type = rx_cfg->rxp_type;
-		rxp->rx = rx;
-		rxp->cq.rx = rx;
-
-		/* Get required RXQs, and queue them to rx-path */
-		q0 = _get_free_rxq(rx_mod);
-		if (BNA_RXP_SINGLE == rx_cfg->rxp_type)
-			q1 = NULL;
-		else
-			q1 = _get_free_rxq(rx_mod);
-
-		/* Initialize IB */
-		if (1 == intr_info->num) {
-			rxp->cq.ib = bna_ib_get(&bna->ib_mod,
-					intr_info->intr_type,
-					intr_info->idl[0].vector);
-			rxp->vector = intr_info->idl[0].vector;
-		} else {
-			rxp->cq.ib = bna_ib_get(&bna->ib_mod,
-					intr_info->intr_type,
-					intr_info->idl[i].vector);
-
-			/* Map the MSI-x vector used for this RXP */
-			rxp->vector = intr_info->idl[i].vector;
-		}
-
-		rxp->cq.ib_seg_offset = bna_ib_reserve_idx(rxp->cq.ib);
-
-		ibcfg.coalescing_timeo = BFI_RX_COALESCING_TIMEO;
-		ibcfg.interpkt_count = BFI_RX_INTERPKT_COUNT;
-		ibcfg.interpkt_timeo = BFI_RX_INTERPKT_TIMEO;
-		ibcfg.ctrl_flags = BFI_IB_CF_INT_ENABLE;
-
-		bna_ib_config(rxp->cq.ib, &ibcfg);
-
-		/* Link rxqs to rxp */
-		_rxp_add_rxqs(rxp, q0, q1);
-
-		/* Link rxp to rx */
-		_rx_add_rxp(rx, rxp);
-
-		q0->rx = rx;
-		q0->rxp = rxp;
-
-		/* Initialize RCB for the large / data q */
-		q0->rcb = (struct bna_rcb *) rcb_mem[rcb_idx].kva;
-		RXQ_RCB_INIT(q0, rxp, rx_cfg->q_depth, bna, 0,
-			(void *)unmapq_mem[rcb_idx].kva);
-		rcb_idx++;
-		(q0)->rx_packets = (q0)->rx_bytes = 0;
-		(q0)->rx_packets_with_error = (q0)->rxbuf_alloc_failed = 0;
-
-		/* Initialize RXQs */
-		_rxq_qpt_init(q0, rxp, dpage_count, PAGE_SIZE,
-			&dqpt_mem[i], &dsqpt_mem[i], &dpage_mem[dpage_idx]);
-		q0->rcb->page_idx = dpage_idx;
-		q0->rcb->page_count = dpage_count;
-		dpage_idx += dpage_count;
-
-		/* Call bnad to complete rcb setup */
-		if (rx->rcb_setup_cbfn)
-			rx->rcb_setup_cbfn(bnad, q0->rcb);
-
-		if (q1) {
-			q1->rx = rx;
-			q1->rxp = rxp;
-
-			q1->rcb = (struct bna_rcb *) rcb_mem[rcb_idx].kva;
-			RXQ_RCB_INIT(q1, rxp, rx_cfg->q_depth, bna, 1,
-				(void *)unmapq_mem[rcb_idx].kva);
-			rcb_idx++;
-			(q1)->buffer_size = (rx_cfg)->small_buff_size;
-			(q1)->rx_packets = (q1)->rx_bytes = 0;
-			(q1)->rx_packets_with_error =
-				(q1)->rxbuf_alloc_failed = 0;
-
-			_rxq_qpt_init(q1, rxp, hpage_count, PAGE_SIZE,
-				&hqpt_mem[i], &hsqpt_mem[i],
-				&hpage_mem[hpage_idx]);
-			q1->rcb->page_idx = hpage_idx;
-			q1->rcb->page_count = hpage_count;
-			hpage_idx += hpage_count;
-
-			/* Call bnad to complete rcb setup */
-			if (rx->rcb_setup_cbfn)
-				rx->rcb_setup_cbfn(bnad, q1->rcb);
-		}
-		/* Setup RXP::CQ */
-		rxp->cq.ccb = (struct bna_ccb *) ccb_mem[i].kva;
-		_rxp_cqpt_setup(rxp, page_count, PAGE_SIZE,
-			&cqpt_mem[i], &cswqpt_mem[i], &cpage_mem[cpage_idx]);
-		rxp->cq.ccb->page_idx = cpage_idx;
-		rxp->cq.ccb->page_count = page_count;
-		cpage_idx += page_count;
-
-		rxp->cq.ccb->pkt_rate.small_pkt_cnt = 0;
-		rxp->cq.ccb->pkt_rate.large_pkt_cnt = 0;
-
-		rxp->cq.ccb->producer_index = 0;
-		rxp->cq.ccb->q_depth =	rx_cfg->q_depth +
-					((rx_cfg->rxp_type == BNA_RXP_SINGLE) ?
-					0 : rx_cfg->q_depth);
-		rxp->cq.ccb->i_dbell = &rxp->cq.ib->door_bell;
-		rxp->cq.ccb->rcb[0] = q0->rcb;
-		if (q1)
-			rxp->cq.ccb->rcb[1] = q1->rcb;
-		rxp->cq.ccb->cq = &rxp->cq;
-		rxp->cq.ccb->bnad = bna->bnad;
-		rxp->cq.ccb->hw_producer_index =
-			((volatile u32 *)rxp->cq.ib->ib_seg_host_addr_kva +
-				      (rxp->cq.ib_seg_offset * BFI_IBIDX_SIZE));
-		*(rxp->cq.ccb->hw_producer_index) = 0;
-		rxp->cq.ccb->intr_type = intr_info->intr_type;
-		rxp->cq.ccb->intr_vector = (intr_info->num == 1) ?
-						intr_info->idl[0].vector :
-						intr_info->idl[i].vector;
-		rxp->cq.ccb->rx_coalescing_timeo =
-					rxp->cq.ib->ib_config.coalescing_timeo;
-		rxp->cq.ccb->id = i;
-
-		/* Call bnad to complete CCB setup */
-		if (rx->ccb_setup_cbfn)
-			rx->ccb_setup_cbfn(bnad, rxp->cq.ccb);
-
-	} /* for each rx-path */
-
-	bna_rxf_init(&rx->rxf, rx, rx_cfg);
-
-	bfa_fsm_set_state(rx, bna_rx_sm_stopped);
-
-	return rx;
-}
-
-void
-bna_rx_destroy(struct bna_rx *rx)
-{
-	struct bna_rx_mod *rx_mod = &rx->bna->rx_mod;
-	struct bna_ib_mod *ib_mod = &rx->bna->ib_mod;
-	struct bna_rxq *q0 = NULL;
-	struct bna_rxq *q1 = NULL;
-	struct bna_rxp *rxp;
-	struct list_head *qe;
-
-	bna_rxf_uninit(&rx->rxf);
-
-	while (!list_empty(&rx->rxp_q)) {
-		bfa_q_deq(&rx->rxp_q, &rxp);
-		GET_RXQS(rxp, q0, q1);
-		/* Callback to bnad for destroying RCB */
-		if (rx->rcb_destroy_cbfn)
-			rx->rcb_destroy_cbfn(rx->bna->bnad, q0->rcb);
-		q0->rcb = NULL;
-		q0->rxp = NULL;
-		q0->rx = NULL;
-		_put_free_rxq(rx_mod, q0);
-		if (q1) {
-			/* Callback to bnad for destroying RCB */
-			if (rx->rcb_destroy_cbfn)
-				rx->rcb_destroy_cbfn(rx->bna->bnad, q1->rcb);
-			q1->rcb = NULL;
-			q1->rxp = NULL;
-			q1->rx = NULL;
-			_put_free_rxq(rx_mod, q1);
-		}
-		rxp->rxq.slr.large = NULL;
-		rxp->rxq.slr.small = NULL;
-		if (rxp->cq.ib) {
-			if (rxp->cq.ib_seg_offset != 0xff)
-				bna_ib_release_idx(rxp->cq.ib,
-						rxp->cq.ib_seg_offset);
-			bna_ib_put(ib_mod, rxp->cq.ib);
-			rxp->cq.ib = NULL;
-		}
-		/* Callback to bnad for destroying CCB */
-		if (rx->ccb_destroy_cbfn)
-			rx->ccb_destroy_cbfn(rx->bna->bnad, rxp->cq.ccb);
-		rxp->cq.ccb = NULL;
-		rxp->rx = NULL;
-		_put_free_rxp(rx_mod, rxp);
-	}
-
-	list_for_each(qe, &rx_mod->rx_active_q) {
-		if (qe == &rx->qe) {
-			list_del(&rx->qe);
-			bfa_q_qe_init(&rx->qe);
-			break;
-		}
-	}
-
-	rx->bna = NULL;
-	rx->priv = NULL;
-	_put_free_rx(rx_mod, rx);
-}
-
-void
-bna_rx_enable(struct bna_rx *rx)
-{
-	if (rx->fsm != (bfa_sm_t)bna_rx_sm_stopped)
-		return;
-
-	rx->rx_flags |= BNA_RX_F_ENABLE;
-	if (rx->rx_flags & BNA_RX_F_PORT_ENABLED)
-		bfa_fsm_send_event(rx, RX_E_START);
-}
-
-void
-bna_rx_disable(struct bna_rx *rx, enum bna_cleanup_type type,
-		void (*cbfn)(void *, struct bna_rx *,
-				enum bna_cb_status))
-{
-	if (type == BNA_SOFT_CLEANUP) {
-		/* h/w should not be accessed. Treat we're stopped */
-		(*cbfn)(rx->bna->bnad, rx, BNA_CB_SUCCESS);
-	} else {
-		rx->stop_cbfn = cbfn;
-		rx->stop_cbarg = rx->bna->bnad;
-
-		rx->rx_flags &= ~BNA_RX_F_ENABLE;
-
-		bfa_fsm_send_event(rx, RX_E_STOP);
-	}
-}
-
-/**
- * TX
- */
-#define call_tx_stop_cbfn(tx, status)\
-do {\
-	if ((tx)->stop_cbfn)\
-		(tx)->stop_cbfn((tx)->stop_cbarg, (tx), status);\
-	(tx)->stop_cbfn = NULL;\
-	(tx)->stop_cbarg = NULL;\
-} while (0)
-
-#define call_tx_prio_change_cbfn(tx, status)\
-do {\
-	if ((tx)->prio_change_cbfn)\
-		(tx)->prio_change_cbfn((tx)->bna->bnad, (tx), status);\
-	(tx)->prio_change_cbfn = NULL;\
-} while (0)
-
-static void bna_tx_mod_cb_tx_stopped(void *tx_mod, struct bna_tx *tx,
-					enum bna_cb_status status);
-static void bna_tx_cb_txq_stopped(void *arg, int status);
-static void bna_tx_cb_stats_cleared(void *arg, int status);
-static void __bna_tx_stop(struct bna_tx *tx);
-static void __bna_tx_start(struct bna_tx *tx);
-static void __bna_txf_stat_clr(struct bna_tx *tx);
-
-enum bna_tx_event {
-	TX_E_START			= 1,
-	TX_E_STOP			= 2,
-	TX_E_FAIL			= 3,
-	TX_E_TXQ_STOPPED		= 4,
-	TX_E_PRIO_CHANGE		= 5,
-	TX_E_STAT_CLEARED		= 6,
-};
-
-enum bna_tx_state {
-	BNA_TX_STOPPED			= 1,
-	BNA_TX_STARTED			= 2,
-	BNA_TX_TXQ_STOP_WAIT		= 3,
-	BNA_TX_PRIO_STOP_WAIT		= 4,
-	BNA_TX_STAT_CLR_WAIT		= 5,
-};
-
-bfa_fsm_state_decl(bna_tx, stopped, struct bna_tx,
-			enum bna_tx_event);
-bfa_fsm_state_decl(bna_tx, started, struct bna_tx,
-			enum bna_tx_event);
-bfa_fsm_state_decl(bna_tx, txq_stop_wait, struct bna_tx,
-			enum bna_tx_event);
-bfa_fsm_state_decl(bna_tx, prio_stop_wait, struct bna_tx,
-			enum bna_tx_event);
-bfa_fsm_state_decl(bna_tx, stat_clr_wait, struct bna_tx,
-			enum bna_tx_event);
-
-static struct bfa_sm_table tx_sm_table[] = {
-	{BFA_SM(bna_tx_sm_stopped), BNA_TX_STOPPED},
-	{BFA_SM(bna_tx_sm_started), BNA_TX_STARTED},
-	{BFA_SM(bna_tx_sm_txq_stop_wait), BNA_TX_TXQ_STOP_WAIT},
-	{BFA_SM(bna_tx_sm_prio_stop_wait), BNA_TX_PRIO_STOP_WAIT},
-	{BFA_SM(bna_tx_sm_stat_clr_wait), BNA_TX_STAT_CLR_WAIT},
-};
-
-static void
-bna_tx_sm_stopped_entry(struct bna_tx *tx)
-{
-	struct bna_txq *txq;
-	struct list_head		 *qe;
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		(tx->tx_cleanup_cbfn)(tx->bna->bnad, txq->tcb);
-	}
-
-	call_tx_stop_cbfn(tx, BNA_CB_SUCCESS);
-}
-
-static void
-bna_tx_sm_stopped(struct bna_tx *tx, enum bna_tx_event event)
-{
-	switch (event) {
-	case TX_E_START:
-		bfa_fsm_set_state(tx, bna_tx_sm_started);
-		break;
-
-	case TX_E_STOP:
-		bfa_fsm_set_state(tx, bna_tx_sm_stopped);
-		break;
-
-	case TX_E_FAIL:
-		/* No-op */
-		break;
-
-	case TX_E_PRIO_CHANGE:
-		call_tx_prio_change_cbfn(tx, BNA_CB_SUCCESS);
-		break;
-
-	case TX_E_TXQ_STOPPED:
-		/**
-		 * This event is received due to flushing of mbox when
-		 * device fails
-		 */
-		/* No-op */
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_tx_sm_started_entry(struct bna_tx *tx)
-{
-	struct bna_txq *txq;
-	struct list_head		 *qe;
-
-	__bna_tx_start(tx);
-
-	/* Start IB */
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		bna_ib_ack(&txq->ib->door_bell, 0);
-	}
-}
-
-static void
-bna_tx_sm_started(struct bna_tx *tx, enum bna_tx_event event)
-{
-	struct bna_txq *txq;
-	struct list_head		 *qe;
-
-	switch (event) {
-	case TX_E_STOP:
-		bfa_fsm_set_state(tx, bna_tx_sm_txq_stop_wait);
-		__bna_tx_stop(tx);
-		break;
-
-	case TX_E_FAIL:
-		list_for_each(qe, &tx->txq_q) {
-			txq = (struct bna_txq *)qe;
-			bna_ib_fail(txq->ib);
-			(tx->tx_stall_cbfn)(tx->bna->bnad, txq->tcb);
-		}
-		bfa_fsm_set_state(tx, bna_tx_sm_stopped);
-		break;
-
-	case TX_E_PRIO_CHANGE:
-		bfa_fsm_set_state(tx, bna_tx_sm_prio_stop_wait);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_tx_sm_txq_stop_wait_entry(struct bna_tx *tx)
-{
-}
-
-static void
-bna_tx_sm_txq_stop_wait(struct bna_tx *tx, enum bna_tx_event event)
-{
-	struct bna_txq *txq;
-	struct list_head		 *qe;
-
-	switch (event) {
-	case TX_E_FAIL:
-		bfa_fsm_set_state(tx, bna_tx_sm_stopped);
-		break;
-
-	case TX_E_TXQ_STOPPED:
-		list_for_each(qe, &tx->txq_q) {
-			txq = (struct bna_txq *)qe;
-			bna_ib_stop(txq->ib);
-		}
-		bfa_fsm_set_state(tx, bna_tx_sm_stat_clr_wait);
-		break;
-
-	case TX_E_PRIO_CHANGE:
-		/* No-op */
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_tx_sm_prio_stop_wait_entry(struct bna_tx *tx)
-{
-	__bna_tx_stop(tx);
-}
-
-static void
-bna_tx_sm_prio_stop_wait(struct bna_tx *tx, enum bna_tx_event event)
-{
-	struct bna_txq *txq;
-	struct list_head		 *qe;
-
-	switch (event) {
-	case TX_E_STOP:
-		bfa_fsm_set_state(tx, bna_tx_sm_txq_stop_wait);
-		break;
-
-	case TX_E_FAIL:
-		call_tx_prio_change_cbfn(tx, BNA_CB_FAIL);
-		bfa_fsm_set_state(tx, bna_tx_sm_stopped);
-		break;
-
-	case TX_E_TXQ_STOPPED:
-		list_for_each(qe, &tx->txq_q) {
-			txq = (struct bna_txq *)qe;
-			bna_ib_stop(txq->ib);
-			(tx->tx_cleanup_cbfn)(tx->bna->bnad, txq->tcb);
-		}
-		call_tx_prio_change_cbfn(tx, BNA_CB_SUCCESS);
-		bfa_fsm_set_state(tx, bna_tx_sm_started);
-		break;
-
-	case TX_E_PRIO_CHANGE:
-		/* No-op */
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_tx_sm_stat_clr_wait_entry(struct bna_tx *tx)
-{
-	__bna_txf_stat_clr(tx);
-}
-
-static void
-bna_tx_sm_stat_clr_wait(struct bna_tx *tx, enum bna_tx_event event)
-{
-	switch (event) {
-	case TX_E_FAIL:
-	case TX_E_STAT_CLEARED:
-		bfa_fsm_set_state(tx, bna_tx_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-__bna_txq_start(struct bna_tx *tx, struct bna_txq *txq)
-{
-	struct bna_rxtx_q_mem *q_mem;
-	struct bna_txq_mem txq_cfg;
-	struct bna_txq_mem *txq_mem;
-	struct bna_dma_addr cur_q_addr;
-	u32 pg_num;
-	void __iomem *base_addr;
-	unsigned long off;
-
-	/* Fill out structure, to be subsequently written to hardware */
-	txq_cfg.pg_tbl_addr_lo = txq->qpt.hw_qpt_ptr.lsb;
-	txq_cfg.pg_tbl_addr_hi = txq->qpt.hw_qpt_ptr.msb;
-	cur_q_addr = *((struct bna_dma_addr *)(txq->qpt.kv_qpt_ptr));
-	txq_cfg.cur_q_entry_lo = cur_q_addr.lsb;
-	txq_cfg.cur_q_entry_hi = cur_q_addr.msb;
-
-	txq_cfg.pg_cnt_n_prd_ptr = (txq->qpt.page_count << 16) | 0x0;
-
-	txq_cfg.entry_n_pg_size = ((u32)(BFI_TXQ_WI_SIZE >> 2) << 16) |
-			(txq->qpt.page_size >> 2);
-	txq_cfg.int_blk_n_cns_ptr = ((((u32)txq->ib_seg_offset) << 24) |
-			((u32)(txq->ib->ib_id & 0xff) << 16) | 0x0);
-
-	txq_cfg.cns_ptr2_n_q_state = BNA_Q_IDLE_STATE;
-	txq_cfg.nxt_qid_n_fid_n_pri = (((tx->txf.txf_id & 0x3f) << 3) |
-			(txq->priority & 0x7));
-	txq_cfg.wvc_n_cquota_n_rquota =
-			((((u32)BFI_TX_MAX_WRR_QUOTA & 0xfff) << 12) |
-			(BFI_TX_MAX_WRR_QUOTA & 0xfff));
-
-	/* Setup the page and write to H/W */
-
-	pg_num = BNA_GET_PAGE_NUM(HQM0_BLK_PG_NUM + tx->bna->port_num,
-			HQM_RXTX_Q_RAM_BASE_OFFSET);
-	writel(pg_num, tx->bna->regs.page_addr);
-
-	base_addr = BNA_GET_MEM_BASE_ADDR(tx->bna->pcidev.pci_bar_kva,
-					HQM_RXTX_Q_RAM_BASE_OFFSET);
-	q_mem = (struct bna_rxtx_q_mem *)0;
-	txq_mem = &q_mem[txq->txq_id].txq;
-
-	/*
-	 * The following 4 lines, is a hack b'cos the H/W needs to read
-	 * these DMA addresses as little endian
-	 */
-
-	off = (unsigned long)&txq_mem->pg_tbl_addr_lo;
-	writel(htonl(txq_cfg.pg_tbl_addr_lo), base_addr + off);
-
-	off = (unsigned long)&txq_mem->pg_tbl_addr_hi;
-	writel(htonl(txq_cfg.pg_tbl_addr_hi), base_addr + off);
-
-	off = (unsigned long)&txq_mem->cur_q_entry_lo;
-	writel(htonl(txq_cfg.cur_q_entry_lo), base_addr + off);
-
-	off = (unsigned long)&txq_mem->cur_q_entry_hi;
-	writel(htonl(txq_cfg.cur_q_entry_hi), base_addr + off);
-
-	off = (unsigned long)&txq_mem->pg_cnt_n_prd_ptr;
-	writel(txq_cfg.pg_cnt_n_prd_ptr, base_addr + off);
-
-	off = (unsigned long)&txq_mem->entry_n_pg_size;
-	writel(txq_cfg.entry_n_pg_size, base_addr + off);
-
-	off = (unsigned long)&txq_mem->int_blk_n_cns_ptr;
-	writel(txq_cfg.int_blk_n_cns_ptr, base_addr + off);
-
-	off = (unsigned long)&txq_mem->cns_ptr2_n_q_state;
-	writel(txq_cfg.cns_ptr2_n_q_state, base_addr + off);
-
-	off = (unsigned long)&txq_mem->nxt_qid_n_fid_n_pri;
-	writel(txq_cfg.nxt_qid_n_fid_n_pri, base_addr + off);
-
-	off = (unsigned long)&txq_mem->wvc_n_cquota_n_rquota;
-	writel(txq_cfg.wvc_n_cquota_n_rquota, base_addr + off);
-
-	txq->tcb->producer_index = 0;
-	txq->tcb->consumer_index = 0;
-	*(txq->tcb->hw_consumer_index) = 0;
-
-}
-
-static void
-__bna_txq_stop(struct bna_tx *tx, struct bna_txq *txq)
-{
-	struct bfi_ll_q_stop_req ll_req;
-	u32 bit_mask[2] = {0, 0};
-	if (txq->txq_id < 32)
-		bit_mask[0] = (u32)1 << txq->txq_id;
-	else
-		bit_mask[1] = (u32)1 << (txq->txq_id - 32);
-
-	memset(&ll_req, 0, sizeof(ll_req));
-	ll_req.mh.msg_class = BFI_MC_LL;
-	ll_req.mh.msg_id = BFI_LL_H2I_TXQ_STOP_REQ;
-	ll_req.mh.mtag.h2i.lpu_id = 0;
-	ll_req.q_id_mask[0] = htonl(bit_mask[0]);
-	ll_req.q_id_mask[1] = htonl(bit_mask[1]);
-
-	bna_mbox_qe_fill(&tx->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_tx_cb_txq_stopped, tx);
-
-	bna_mbox_send(tx->bna, &tx->mbox_qe);
-}
-
-static void
-__bna_txf_start(struct bna_tx *tx)
-{
-	struct bna_tx_fndb_ram *tx_fndb;
-	struct bna_txf *txf = &tx->txf;
-	void __iomem *base_addr;
-	unsigned long off;
-
-	writel(BNA_GET_PAGE_NUM(LUT0_MEM_BLK_BASE_PG_NUM +
-			(tx->bna->port_num * 2), TX_FNDB_RAM_BASE_OFFSET),
-			tx->bna->regs.page_addr);
-
-	base_addr = BNA_GET_MEM_BASE_ADDR(tx->bna->pcidev.pci_bar_kva,
-					TX_FNDB_RAM_BASE_OFFSET);
-
-	tx_fndb = (struct bna_tx_fndb_ram *)0;
-	off = (unsigned long)&tx_fndb[txf->txf_id].vlan_n_ctrl_flags;
-
-	writel(((u32)txf->vlan << 16) | txf->ctrl_flags,
-			base_addr + off);
-
-	if (tx->txf.txf_id < 32)
-		tx->bna->tx_mod.txf_bmap[0] |= ((u32)1 << tx->txf.txf_id);
-	else
-		tx->bna->tx_mod.txf_bmap[1] |= ((u32)
-						 1 << (tx->txf.txf_id - 32));
-}
-
-static void
-__bna_txf_stop(struct bna_tx *tx)
-{
-	struct bna_tx_fndb_ram *tx_fndb;
-	u32 page_num;
-	u32 ctl_flags;
-	struct bna_txf *txf = &tx->txf;
-	void __iomem *base_addr;
-	unsigned long off;
-
-	/* retrieve the running txf_flags & turn off enable bit */
-	page_num = BNA_GET_PAGE_NUM(LUT0_MEM_BLK_BASE_PG_NUM +
-			(tx->bna->port_num * 2), TX_FNDB_RAM_BASE_OFFSET);
-	writel(page_num, tx->bna->regs.page_addr);
-
-	base_addr = BNA_GET_MEM_BASE_ADDR(tx->bna->pcidev.pci_bar_kva,
-					TX_FNDB_RAM_BASE_OFFSET);
-	tx_fndb = (struct bna_tx_fndb_ram *)0;
-	off = (unsigned long)&tx_fndb[txf->txf_id].vlan_n_ctrl_flags;
-
-	ctl_flags = readl(base_addr + off);
-	ctl_flags &= ~BFI_TXF_CF_ENABLE;
-
-	writel(ctl_flags, base_addr + off);
-
-	if (tx->txf.txf_id < 32)
-		tx->bna->tx_mod.txf_bmap[0] &= ~((u32)1 << tx->txf.txf_id);
-	else
-		tx->bna->tx_mod.txf_bmap[0] &= ~((u32)
-						 1 << (tx->txf.txf_id - 32));
-}
-
-static void
-__bna_txf_stat_clr(struct bna_tx *tx)
-{
-	struct bfi_ll_stats_req ll_req;
-	u32 txf_bmap[2] = {0, 0};
-	if (tx->txf.txf_id < 32)
-		txf_bmap[0] = ((u32)1 << tx->txf.txf_id);
-	else
-		txf_bmap[1] = ((u32)1 << (tx->txf.txf_id - 32));
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_STATS_CLEAR_REQ, 0);
-	ll_req.stats_mask = 0;
-	ll_req.rxf_id_mask[0] = 0;
-	ll_req.rxf_id_mask[1] =	0;
-	ll_req.txf_id_mask[0] =	htonl(txf_bmap[0]);
-	ll_req.txf_id_mask[1] =	htonl(txf_bmap[1]);
-
-	bna_mbox_qe_fill(&tx->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_tx_cb_stats_cleared, tx);
-	bna_mbox_send(tx->bna, &tx->mbox_qe);
-}
-
-static void
-__bna_tx_start(struct bna_tx *tx)
-{
-	struct bna_txq *txq;
-	struct list_head		 *qe;
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		bna_ib_start(txq->ib);
-		__bna_txq_start(tx, txq);
-	}
-
-	__bna_txf_start(tx);
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		txq->tcb->priority = txq->priority;
-		(tx->tx_resume_cbfn)(tx->bna->bnad, txq->tcb);
-	}
-}
-
-static void
-__bna_tx_stop(struct bna_tx *tx)
-{
-	struct bna_txq *txq;
-	struct list_head		 *qe;
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		(tx->tx_stall_cbfn)(tx->bna->bnad, txq->tcb);
-	}
-
-	__bna_txf_stop(tx);
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		bfa_wc_up(&tx->txq_stop_wc);
-	}
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		__bna_txq_stop(tx, txq);
-	}
-}
-
-static void
-bna_txq_qpt_setup(struct bna_txq *txq, int page_count, int page_size,
-		struct bna_mem_descr *qpt_mem,
-		struct bna_mem_descr *swqpt_mem,
-		struct bna_mem_descr *page_mem)
-{
-	int i;
-
-	txq->qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
-	txq->qpt.hw_qpt_ptr.msb = qpt_mem->dma.msb;
-	txq->qpt.kv_qpt_ptr = qpt_mem->kva;
-	txq->qpt.page_count = page_count;
-	txq->qpt.page_size = page_size;
-
-	txq->tcb->sw_qpt = (void **) swqpt_mem->kva;
-
-	for (i = 0; i < page_count; i++) {
-		txq->tcb->sw_qpt[i] = page_mem[i].kva;
-
-		((struct bna_dma_addr *)txq->qpt.kv_qpt_ptr)[i].lsb =
-			page_mem[i].dma.lsb;
-		((struct bna_dma_addr *)txq->qpt.kv_qpt_ptr)[i].msb =
-			page_mem[i].dma.msb;
-
-	}
-}
-
-static void
-bna_tx_free(struct bna_tx *tx)
-{
-	struct bna_tx_mod *tx_mod = &tx->bna->tx_mod;
-	struct bna_txq *txq;
-	struct bna_ib_mod *ib_mod = &tx->bna->ib_mod;
-	struct list_head *qe;
-
-	while (!list_empty(&tx->txq_q)) {
-		bfa_q_deq(&tx->txq_q, &txq);
-		bfa_q_qe_init(&txq->qe);
-		if (txq->ib) {
-			if (txq->ib_seg_offset != -1)
-				bna_ib_release_idx(txq->ib,
-						txq->ib_seg_offset);
-			bna_ib_put(ib_mod, txq->ib);
-			txq->ib = NULL;
-		}
-		txq->tcb = NULL;
-		txq->tx = NULL;
-		list_add_tail(&txq->qe, &tx_mod->txq_free_q);
-	}
-
-	list_for_each(qe, &tx_mod->tx_active_q) {
-		if (qe == &tx->qe) {
-			list_del(&tx->qe);
-			bfa_q_qe_init(&tx->qe);
-			break;
-		}
-	}
-
-	tx->bna = NULL;
-	tx->priv = NULL;
-	list_add_tail(&tx->qe, &tx_mod->tx_free_q);
-}
-
-static void
-bna_tx_cb_txq_stopped(void *arg, int status)
-{
-	struct bna_tx *tx = (struct bna_tx *)arg;
-
-	bfa_q_qe_init(&tx->mbox_qe.qe);
-	bfa_wc_down(&tx->txq_stop_wc);
-}
-
-static void
-bna_tx_cb_txq_stopped_all(void *arg)
-{
-	struct bna_tx *tx = (struct bna_tx *)arg;
-
-	bfa_fsm_send_event(tx, TX_E_TXQ_STOPPED);
-}
-
-static void
-bna_tx_cb_stats_cleared(void *arg, int status)
-{
-	struct bna_tx *tx = (struct bna_tx *)arg;
-
-	bfa_q_qe_init(&tx->mbox_qe.qe);
-
-	bfa_fsm_send_event(tx, TX_E_STAT_CLEARED);
-}
-
-static void
-bna_tx_start(struct bna_tx *tx)
-{
-	tx->flags |= BNA_TX_F_PORT_STARTED;
-	if (tx->flags & BNA_TX_F_ENABLED)
-		bfa_fsm_send_event(tx, TX_E_START);
-}
-
-static void
-bna_tx_stop(struct bna_tx *tx)
-{
-	tx->stop_cbfn = bna_tx_mod_cb_tx_stopped;
-	tx->stop_cbarg = &tx->bna->tx_mod;
-
-	tx->flags &= ~BNA_TX_F_PORT_STARTED;
-	bfa_fsm_send_event(tx, TX_E_STOP);
-}
-
-static void
-bna_tx_fail(struct bna_tx *tx)
-{
-	tx->flags &= ~BNA_TX_F_PORT_STARTED;
-	bfa_fsm_send_event(tx, TX_E_FAIL);
-}
-
-static void
-bna_tx_prio_changed(struct bna_tx *tx, int prio)
-{
-	struct bna_txq *txq;
-	struct list_head		 *qe;
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		txq->priority = prio;
-	}
-
-	bfa_fsm_send_event(tx, TX_E_PRIO_CHANGE);
-}
-
-static void
-bna_tx_cee_link_status(struct bna_tx *tx, int cee_link)
-{
-	if (cee_link)
-		tx->flags |= BNA_TX_F_PRIO_LOCK;
-	else
-		tx->flags &= ~BNA_TX_F_PRIO_LOCK;
-}
-
-static void
-bna_tx_mod_cb_tx_stopped(void *arg, struct bna_tx *tx,
-			enum bna_cb_status status)
-{
-	struct bna_tx_mod *tx_mod = (struct bna_tx_mod *)arg;
-
-	bfa_wc_down(&tx_mod->tx_stop_wc);
-}
-
-static void
-bna_tx_mod_cb_tx_stopped_all(void *arg)
-{
-	struct bna_tx_mod *tx_mod = (struct bna_tx_mod *)arg;
-
-	if (tx_mod->stop_cbfn)
-		tx_mod->stop_cbfn(&tx_mod->bna->port, BNA_CB_SUCCESS);
-	tx_mod->stop_cbfn = NULL;
-}
-
-void
-bna_tx_res_req(int num_txq, int txq_depth, struct bna_res_info *res_info)
-{
-	u32 q_size;
-	u32 page_count;
-	struct bna_mem_info *mem_info;
-
-	res_info[BNA_TX_RES_MEM_T_TCB].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_TX_RES_MEM_T_TCB].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_KVA;
-	mem_info->len = sizeof(struct bna_tcb);
-	mem_info->num = num_txq;
-
-	q_size = txq_depth * BFI_TXQ_WI_SIZE;
-	q_size = ALIGN(q_size, PAGE_SIZE);
-	page_count = q_size >> PAGE_SHIFT;
-
-	res_info[BNA_TX_RES_MEM_T_QPT].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_TX_RES_MEM_T_QPT].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_DMA;
-	mem_info->len = page_count * sizeof(struct bna_dma_addr);
-	mem_info->num = num_txq;
-
-	res_info[BNA_TX_RES_MEM_T_SWQPT].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_TX_RES_MEM_T_SWQPT].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_KVA;
-	mem_info->len = page_count * sizeof(void *);
-	mem_info->num = num_txq;
-
-	res_info[BNA_TX_RES_MEM_T_PAGE].res_type = BNA_RES_T_MEM;
-	mem_info = &res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info;
-	mem_info->mem_type = BNA_MEM_T_DMA;
-	mem_info->len = PAGE_SIZE;
-	mem_info->num = num_txq * page_count;
-
-	res_info[BNA_TX_RES_INTR_T_TXCMPL].res_type = BNA_RES_T_INTR;
-	res_info[BNA_TX_RES_INTR_T_TXCMPL].res_u.intr_info.intr_type =
-			BNA_INTR_T_MSIX;
-	res_info[BNA_TX_RES_INTR_T_TXCMPL].res_u.intr_info.num = num_txq;
-}
-
-struct bna_tx *
-bna_tx_create(struct bna *bna, struct bnad *bnad,
-		struct bna_tx_config *tx_cfg,
-		struct bna_tx_event_cbfn *tx_cbfn,
-		struct bna_res_info *res_info, void *priv)
-{
-	struct bna_intr_info *intr_info;
-	struct bna_tx_mod *tx_mod = &bna->tx_mod;
-	struct bna_tx *tx;
-	struct bna_txq *txq;
-	struct list_head *qe;
-	struct bna_ib_mod *ib_mod = &bna->ib_mod;
-	struct bna_doorbell_qset *qset;
-	struct bna_ib_config ib_config;
-	int page_count;
-	int page_size;
-	int page_idx;
-	int i;
-	unsigned long off;
-
-	intr_info = &res_info[BNA_TX_RES_INTR_T_TXCMPL].res_u.intr_info;
-	page_count = (res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info.num) /
-			tx_cfg->num_txq;
-	page_size = res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info.len;
-
-	/**
-	 * Get resources
-	 */
-
-	if ((intr_info->num != 1) && (intr_info->num != tx_cfg->num_txq))
-		return NULL;
-
-	/* Tx */
-
-	if (list_empty(&tx_mod->tx_free_q))
-		return NULL;
-	bfa_q_deq(&tx_mod->tx_free_q, &tx);
-	bfa_q_qe_init(&tx->qe);
-
-	/* TxQs */
-
-	INIT_LIST_HEAD(&tx->txq_q);
-	for (i = 0; i < tx_cfg->num_txq; i++) {
-		if (list_empty(&tx_mod->txq_free_q))
-			goto err_return;
-
-		bfa_q_deq(&tx_mod->txq_free_q, &txq);
-		bfa_q_qe_init(&txq->qe);
-		list_add_tail(&txq->qe, &tx->txq_q);
-		txq->ib = NULL;
-		txq->ib_seg_offset = -1;
-		txq->tx = tx;
-	}
-
-	/* IBs */
-	i = 0;
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-
-		if (intr_info->num == 1)
-			txq->ib = bna_ib_get(ib_mod, intr_info->intr_type,
-						intr_info->idl[0].vector);
-		else
-			txq->ib = bna_ib_get(ib_mod, intr_info->intr_type,
-						intr_info->idl[i].vector);
-
-		if (txq->ib == NULL)
-			goto err_return;
-
-		txq->ib_seg_offset = bna_ib_reserve_idx(txq->ib);
-		if (txq->ib_seg_offset == -1)
-			goto err_return;
-
-		i++;
-	}
-
-	/*
-	 * Initialize
-	 */
-
-	/* Tx */
-
-	tx->tcb_setup_cbfn = tx_cbfn->tcb_setup_cbfn;
-	tx->tcb_destroy_cbfn = tx_cbfn->tcb_destroy_cbfn;
-	/* Following callbacks are mandatory */
-	tx->tx_stall_cbfn = tx_cbfn->tx_stall_cbfn;
-	tx->tx_resume_cbfn = tx_cbfn->tx_resume_cbfn;
-	tx->tx_cleanup_cbfn = tx_cbfn->tx_cleanup_cbfn;
-
-	list_add_tail(&tx->qe, &tx_mod->tx_active_q);
-	tx->bna = bna;
-	tx->priv = priv;
-	tx->txq_stop_wc.wc_resume = bna_tx_cb_txq_stopped_all;
-	tx->txq_stop_wc.wc_cbarg = tx;
-	tx->txq_stop_wc.wc_count = 0;
-
-	tx->type = tx_cfg->tx_type;
-
-	tx->flags = 0;
-	if (tx->bna->tx_mod.flags & BNA_TX_MOD_F_PORT_STARTED) {
-		switch (tx->type) {
-		case BNA_TX_T_REGULAR:
-			if (!(tx->bna->tx_mod.flags &
-				BNA_TX_MOD_F_PORT_LOOPBACK))
-				tx->flags |= BNA_TX_F_PORT_STARTED;
-			break;
-		case BNA_TX_T_LOOPBACK:
-			if (tx->bna->tx_mod.flags & BNA_TX_MOD_F_PORT_LOOPBACK)
-				tx->flags |= BNA_TX_F_PORT_STARTED;
-			break;
-		}
-	}
-	if (tx->bna->tx_mod.cee_link)
-		tx->flags |= BNA_TX_F_PRIO_LOCK;
-
-	/* TxQ */
-
-	i = 0;
-	page_idx = 0;
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		txq->priority = tx_mod->priority;
-		txq->tcb = (struct bna_tcb *)
-		  res_info[BNA_TX_RES_MEM_T_TCB].res_u.mem_info.mdl[i].kva;
-		txq->tx_packets = 0;
-		txq->tx_bytes = 0;
-
-		/* IB */
-
-		ib_config.coalescing_timeo = BFI_TX_COALESCING_TIMEO;
-		ib_config.interpkt_timeo = 0; /* Not used */
-		ib_config.interpkt_count = BFI_TX_INTERPKT_COUNT;
-		ib_config.ctrl_flags = (BFI_IB_CF_INTER_PKT_DMA |
-					BFI_IB_CF_INT_ENABLE |
-					BFI_IB_CF_COALESCING_MODE);
-		bna_ib_config(txq->ib, &ib_config);
-
-		/* TCB */
-
-		txq->tcb->producer_index = 0;
-		txq->tcb->consumer_index = 0;
-		txq->tcb->hw_consumer_index = (volatile u32 *)
-			((volatile u8 *)txq->ib->ib_seg_host_addr_kva +
-			 (txq->ib_seg_offset * BFI_IBIDX_SIZE));
-		*(txq->tcb->hw_consumer_index) = 0;
-		txq->tcb->q_depth = tx_cfg->txq_depth;
-		txq->tcb->unmap_q = (void *)
-		res_info[BNA_TX_RES_MEM_T_UNMAPQ].res_u.mem_info.mdl[i].kva;
-		qset = (struct bna_doorbell_qset *)0;
-		off = (unsigned long)&qset[txq->txq_id].txq[0];
-		txq->tcb->q_dbell = off +
-			BNA_GET_DOORBELL_BASE_ADDR(bna->pcidev.pci_bar_kva);
-		txq->tcb->i_dbell = &txq->ib->door_bell;
-		txq->tcb->intr_type = intr_info->intr_type;
-		txq->tcb->intr_vector = (intr_info->num == 1) ?
-					intr_info->idl[0].vector :
-					intr_info->idl[i].vector;
-		txq->tcb->txq = txq;
-		txq->tcb->bnad = bnad;
-		txq->tcb->id = i;
-
-		/* QPT, SWQPT, Pages */
-		bna_txq_qpt_setup(txq, page_count, page_size,
-			&res_info[BNA_TX_RES_MEM_T_QPT].res_u.mem_info.mdl[i],
-			&res_info[BNA_TX_RES_MEM_T_SWQPT].res_u.mem_info.mdl[i],
-			&res_info[BNA_TX_RES_MEM_T_PAGE].
-				  res_u.mem_info.mdl[page_idx]);
-		txq->tcb->page_idx = page_idx;
-		txq->tcb->page_count = page_count;
-		page_idx += page_count;
-
-		/* Callback to bnad for setting up TCB */
-		if (tx->tcb_setup_cbfn)
-			(tx->tcb_setup_cbfn)(bna->bnad, txq->tcb);
-
-		i++;
-	}
-
-	/* TxF */
-
-	tx->txf.ctrl_flags = BFI_TXF_CF_ENABLE | BFI_TXF_CF_VLAN_WI_BASED;
-	tx->txf.vlan = 0;
-
-	/* Mbox element */
-	bfa_q_qe_init(&tx->mbox_qe.qe);
-
-	bfa_fsm_set_state(tx, bna_tx_sm_stopped);
-
-	return tx;
-
-err_return:
-	bna_tx_free(tx);
-	return NULL;
-}
-
-void
-bna_tx_destroy(struct bna_tx *tx)
-{
-	/* Callback to bnad for destroying TCB */
-	if (tx->tcb_destroy_cbfn) {
-		struct bna_txq *txq;
-		struct list_head *qe;
-
-		list_for_each(qe, &tx->txq_q) {
-			txq = (struct bna_txq *)qe;
-			(tx->tcb_destroy_cbfn)(tx->bna->bnad, txq->tcb);
-		}
-	}
-
-	bna_tx_free(tx);
-}
-
-void
-bna_tx_enable(struct bna_tx *tx)
-{
-	if (tx->fsm != (bfa_sm_t)bna_tx_sm_stopped)
-		return;
-
-	tx->flags |= BNA_TX_F_ENABLED;
-
-	if (tx->flags & BNA_TX_F_PORT_STARTED)
-		bfa_fsm_send_event(tx, TX_E_START);
-}
-
-void
-bna_tx_disable(struct bna_tx *tx, enum bna_cleanup_type type,
-		void (*cbfn)(void *, struct bna_tx *, enum bna_cb_status))
-{
-	if (type == BNA_SOFT_CLEANUP) {
-		(*cbfn)(tx->bna->bnad, tx, BNA_CB_SUCCESS);
-		return;
-	}
-
-	tx->stop_cbfn = cbfn;
-	tx->stop_cbarg = tx->bna->bnad;
-
-	tx->flags &= ~BNA_TX_F_ENABLED;
-
-	bfa_fsm_send_event(tx, TX_E_STOP);
-}
-
-int
-bna_tx_state_get(struct bna_tx *tx)
-{
-	return bfa_sm_to_state(tx_sm_table, tx->fsm);
-}
-
-void
-bna_tx_mod_init(struct bna_tx_mod *tx_mod, struct bna *bna,
-		struct bna_res_info *res_info)
-{
-	int i;
-
-	tx_mod->bna = bna;
-	tx_mod->flags = 0;
-
-	tx_mod->tx = (struct bna_tx *)
-		res_info[BNA_RES_MEM_T_TX_ARRAY].res_u.mem_info.mdl[0].kva;
-	tx_mod->txq = (struct bna_txq *)
-		res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.mdl[0].kva;
-
-	INIT_LIST_HEAD(&tx_mod->tx_free_q);
-	INIT_LIST_HEAD(&tx_mod->tx_active_q);
-
-	INIT_LIST_HEAD(&tx_mod->txq_free_q);
-
-	for (i = 0; i < BFI_MAX_TXQ; i++) {
-		tx_mod->tx[i].txf.txf_id = i;
-		bfa_q_qe_init(&tx_mod->tx[i].qe);
-		list_add_tail(&tx_mod->tx[i].qe, &tx_mod->tx_free_q);
-
-		tx_mod->txq[i].txq_id = i;
-		bfa_q_qe_init(&tx_mod->txq[i].qe);
-		list_add_tail(&tx_mod->txq[i].qe, &tx_mod->txq_free_q);
-	}
-
-	tx_mod->tx_stop_wc.wc_resume = bna_tx_mod_cb_tx_stopped_all;
-	tx_mod->tx_stop_wc.wc_cbarg = tx_mod;
-	tx_mod->tx_stop_wc.wc_count = 0;
-}
-
-void
-bna_tx_mod_uninit(struct bna_tx_mod *tx_mod)
-{
-	struct list_head		*qe;
-	int i;
-
-	i = 0;
-	list_for_each(qe, &tx_mod->tx_free_q)
-		i++;
-
-	i = 0;
-	list_for_each(qe, &tx_mod->txq_free_q)
-		i++;
-
-	tx_mod->bna = NULL;
-}
-
-void
-bna_tx_mod_start(struct bna_tx_mod *tx_mod, enum bna_tx_type type)
-{
-	struct bna_tx *tx;
-	struct list_head		*qe;
-
-	tx_mod->flags |= BNA_TX_MOD_F_PORT_STARTED;
-	if (type == BNA_TX_T_LOOPBACK)
-		tx_mod->flags |= BNA_TX_MOD_F_PORT_LOOPBACK;
-
-	list_for_each(qe, &tx_mod->tx_active_q) {
-		tx = (struct bna_tx *)qe;
-		if (tx->type == type)
-			bna_tx_start(tx);
-	}
-}
-
-void
-bna_tx_mod_stop(struct bna_tx_mod *tx_mod, enum bna_tx_type type)
-{
-	struct bna_tx *tx;
-	struct list_head		*qe;
-
-	tx_mod->flags &= ~BNA_TX_MOD_F_PORT_STARTED;
-	tx_mod->flags &= ~BNA_TX_MOD_F_PORT_LOOPBACK;
-
-	tx_mod->stop_cbfn = bna_port_cb_tx_stopped;
-
-	/**
-	 * Before calling bna_tx_stop(), increment tx_stop_wc as many times
-	 * as we are going to call bna_tx_stop
-	 */
-	list_for_each(qe, &tx_mod->tx_active_q) {
-		tx = (struct bna_tx *)qe;
-		if (tx->type == type)
-			bfa_wc_up(&tx_mod->tx_stop_wc);
-	}
-
-	if (tx_mod->tx_stop_wc.wc_count == 0) {
-		tx_mod->stop_cbfn(&tx_mod->bna->port, BNA_CB_SUCCESS);
-		tx_mod->stop_cbfn = NULL;
-		return;
-	}
-
-	list_for_each(qe, &tx_mod->tx_active_q) {
-		tx = (struct bna_tx *)qe;
-		if (tx->type == type)
-			bna_tx_stop(tx);
-	}
-}
-
-void
-bna_tx_mod_fail(struct bna_tx_mod *tx_mod)
-{
-	struct bna_tx *tx;
-	struct list_head		*qe;
-
-	tx_mod->flags &= ~BNA_TX_MOD_F_PORT_STARTED;
-	tx_mod->flags &= ~BNA_TX_MOD_F_PORT_LOOPBACK;
-
-	list_for_each(qe, &tx_mod->tx_active_q) {
-		tx = (struct bna_tx *)qe;
-		bna_tx_fail(tx);
-	}
-}
-
-void
-bna_tx_mod_prio_changed(struct bna_tx_mod *tx_mod, int prio)
-{
-	struct bna_tx *tx;
-	struct list_head		*qe;
-
-	if (prio != tx_mod->priority) {
-		tx_mod->priority = prio;
-
-		list_for_each(qe, &tx_mod->tx_active_q) {
-			tx = (struct bna_tx *)qe;
-			bna_tx_prio_changed(tx, prio);
-		}
-	}
-}
-
-void
-bna_tx_mod_cee_link_status(struct bna_tx_mod *tx_mod, int cee_link)
-{
-	struct bna_tx *tx;
-	struct list_head		*qe;
-
-	tx_mod->cee_link = cee_link;
-
-	list_for_each(qe, &tx_mod->tx_active_q) {
-		tx = (struct bna_tx *)qe;
-		bna_tx_cee_link_status(tx, cee_link);
-	}
-}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 38a83acd502e..8cb75a6efec3 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3419,9 +3419,27 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
 static int bond_open(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
+	struct slave *slave;
+	int i;
 
 	bond->kill_timers = 0;
 
+	/* reset slave->backup and slave->inactive */
+	read_lock(&bond->lock);
+	if (bond->slave_cnt > 0) {
+		read_lock(&bond->curr_slave_lock);
+		bond_for_each_slave(bond, slave, i) {
+			if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
+				&& (slave != bond->curr_active_slave)) {
+				bond_set_slave_inactive_flags(slave);
+			} else {
+				bond_set_slave_active_flags(slave);
+			}
+		}
+		read_unlock(&bond->curr_slave_lock);
+	}
+	read_unlock(&bond->lock);
+
 	INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed);
 
 	if (bond_is_lb(bond)) {
@@ -3686,44 +3704,27 @@ static bool bond_addr_in_mc_list(unsigned char *addr,
 	return false;
 }
 
-static void bond_set_multicast_list(struct net_device *bond_dev)
+static void bond_change_rx_flags(struct net_device *bond_dev, int change)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
-	struct netdev_hw_addr *ha;
-	bool found;
 
-	/*
-	 * Do promisc before checking multicast_mode
-	 */
-	if ((bond_dev->flags & IFF_PROMISC) && !(bond->flags & IFF_PROMISC))
-		/*
-		 * FIXME: Need to handle the error when one of the multi-slaves
-		 * encounters error.
-		 */
-		bond_set_promiscuity(bond, 1);
+	if (change & IFF_PROMISC)
+		bond_set_promiscuity(bond,
+				     bond_dev->flags & IFF_PROMISC ? 1 : -1);
 
+	if (change & IFF_ALLMULTI)
+		bond_set_allmulti(bond,
+				  bond_dev->flags & IFF_ALLMULTI ? 1 : -1);
+}
 
-	if (!(bond_dev->flags & IFF_PROMISC) && (bond->flags & IFF_PROMISC))
-		bond_set_promiscuity(bond, -1);
-
-
-	/* set allmulti flag to slaves */
-	if ((bond_dev->flags & IFF_ALLMULTI) && !(bond->flags & IFF_ALLMULTI))
-		/*
-		 * FIXME: Need to handle the error when one of the multi-slaves
-		 * encounters error.
-		 */
-		bond_set_allmulti(bond, 1);
-
-
-	if (!(bond_dev->flags & IFF_ALLMULTI) && (bond->flags & IFF_ALLMULTI))
-		bond_set_allmulti(bond, -1);
-
+static void bond_set_multicast_list(struct net_device *bond_dev)
+{
+	struct bonding *bond = netdev_priv(bond_dev);
+	struct netdev_hw_addr *ha;
+	bool found;
 
 	read_lock(&bond->lock);
 
-	bond->flags = bond_dev->flags;
-
 	/* looking for addresses to add to slaves' mc list */
 	netdev_for_each_mc_addr(ha, bond_dev) {
 		found = bond_addr_in_mc_list(ha->addr, &bond->mc_list,
@@ -4282,7 +4283,8 @@ static const struct net_device_ops bond_netdev_ops = {
 	.ndo_select_queue	= bond_select_queue,
 	.ndo_get_stats64	= bond_get_stats,
 	.ndo_do_ioctl		= bond_do_ioctl,
-	.ndo_set_multicast_list	= bond_set_multicast_list,
+	.ndo_change_rx_flags	= bond_change_rx_flags,
+	.ndo_set_rx_mode	= bond_set_multicast_list,
 	.ndo_change_mtu		= bond_change_mtu,
 	.ndo_set_mac_address	= bond_set_mac_address,
 	.ndo_neigh_setup	= bond_neigh_setup,
@@ -4828,11 +4830,20 @@ static int bond_validate(struct nlattr *tb[], struct nlattr *data[])
 	return 0;
 }
 
+static int bond_get_tx_queues(struct net *net, struct nlattr *tb[],
+			      unsigned int *num_queues,
+			      unsigned int *real_num_queues)
+{
+	*num_queues = tx_queues;
+	return 0;
+}
+
 static struct rtnl_link_ops bond_link_ops __read_mostly = {
 	.kind		= "bond",
 	.priv_size	= sizeof(struct bonding),
 	.setup		= bond_setup,
 	.validate	= bond_validate,
+	.get_tx_queues	= bond_get_tx_queues,
 };
 
 /* Create a new bond based on the specified name and bonding parameters.
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 43526a2d275c..e82336615600 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -234,7 +234,6 @@ struct bonding {
 	struct   netdev_hw_addr_list mc_list;
 	int      (*xmit_hash_policy)(struct sk_buff *, int);
 	__be32   master_ip;
-	u16      flags;
 	u16      rr_tx_counter;
 	struct   ad_bond_info ad_info;
 	struct   alb_bond_info alb_info;
diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c
index b41c2fced0a7..2fcabba56087 100644
--- a/drivers/net/caif/caif_hsi.c
+++ b/drivers/net/caif/caif_hsi.c
@@ -937,11 +937,8 @@ int cfhsi_probe(struct platform_device *pdev)
 	int res;
 
 	ndev = alloc_netdev(sizeof(struct cfhsi), "cfhsi%d", cfhsi_setup);
-	if (!ndev) {
-		dev_err(&pdev->dev, "%s: alloc_netdev failed.\n",
-			__func__);
+	if (!ndev)
 		return -ENODEV;
-	}
 
 	cfhsi = netdev_priv(ndev);
 	cfhsi->ndev = ndev;
@@ -969,8 +966,6 @@ int cfhsi_probe(struct platform_device *pdev)
 	 */
 	cfhsi->tx_buf = kzalloc(CFHSI_BUF_SZ_TX, GFP_KERNEL);
 	if (!cfhsi->tx_buf) {
-		dev_err(&ndev->dev, "%s: Failed to allocate TX buffer.\n",
-			__func__);
 		res = -ENODEV;
 		goto err_alloc_tx;
 	}
@@ -981,8 +976,6 @@ int cfhsi_probe(struct platform_device *pdev)
 	 */
 	cfhsi->rx_buf = kzalloc(CFHSI_BUF_SZ_RX, GFP_KERNEL);
 	if (!cfhsi->rx_buf) {
-		dev_err(&ndev->dev, "%s: Failed to allocate RX buffer.\n",
-			__func__);
 		res = -ENODEV;
 		goto err_alloc_rx;
 	}
diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c
index 0f8defc73307..05e791f46aef 100644
--- a/drivers/net/caif/caif_spi.c
+++ b/drivers/net/caif/caif_spi.c
@@ -664,8 +664,6 @@ int cfspi_spi_probe(struct platform_device *pdev)
 	/* Allocate DMA buffers. */
 	cfspi->xfer.va_tx = dma_alloc(&cfspi->xfer.pa_tx);
 	if (!cfspi->xfer.va_tx) {
-		printk(KERN_WARNING
-		       "CFSPI: failed to allocate dma TX buffer.\n");
 		res = -ENODEV;
 		goto err_dma_alloc_tx;
 	}
@@ -673,8 +671,6 @@ int cfspi_spi_probe(struct platform_device *pdev)
 	cfspi->xfer.va_rx = dma_alloc(&cfspi->xfer.pa_rx);
 
 	if (!cfspi->xfer.va_rx) {
-		printk(KERN_WARNING
-		       "CFSPI: failed to allocate dma TX buffer.\n");
 		res = -ENODEV;
 		goto err_dma_alloc_rx;
 	}
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 17678117ed69..e02337953f41 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -33,10 +33,9 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 
-#include <mach/clock.h>
-
 #define DRV_NAME			"flexcan"
 
 /* 8 for RX fifo and 2 error handling */
@@ -192,6 +191,31 @@ static struct can_bittiming_const flexcan_bittiming_const = {
 };
 
 /*
+ * Abstract off the read/write for arm versus ppc.
+ */
+#if defined(__BIG_ENDIAN)
+static inline u32 flexcan_read(void __iomem *addr)
+{
+	return in_be32(addr);
+}
+
+static inline void flexcan_write(u32 val, void __iomem *addr)
+{
+	out_be32(addr, val);
+}
+#else
+static inline u32 flexcan_read(void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline void flexcan_write(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+#endif
+
+/*
  * Swtich transceiver on or off
  */
 static void flexcan_transceiver_switch(const struct flexcan_priv *priv, int on)
@@ -212,9 +236,9 @@ static inline void flexcan_chip_enable(struct flexcan_priv *priv)
 	struct flexcan_regs __iomem *regs = priv->base;
 	u32 reg;
 
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	reg &= ~FLEXCAN_MCR_MDIS;
-	writel(reg, &regs->mcr);
+	flexcan_write(reg, &regs->mcr);
 
 	udelay(10);
 }
@@ -224,9 +248,9 @@ static inline void flexcan_chip_disable(struct flexcan_priv *priv)
 	struct flexcan_regs __iomem *regs = priv->base;
 	u32 reg;
 
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	reg |= FLEXCAN_MCR_MDIS;
-	writel(reg, &regs->mcr);
+	flexcan_write(reg, &regs->mcr);
 }
 
 static int flexcan_get_berr_counter(const struct net_device *dev,
@@ -234,7 +258,7 @@ static int flexcan_get_berr_counter(const struct net_device *dev,
 {
 	const struct flexcan_priv *priv = netdev_priv(dev);
 	struct flexcan_regs __iomem *regs = priv->base;
-	u32 reg = readl(&regs->ecr);
+	u32 reg = flexcan_read(&regs->ecr);
 
 	bec->txerr = (reg >> 0) & 0xff;
 	bec->rxerr = (reg >> 8) & 0xff;
@@ -268,15 +292,15 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (cf->can_dlc > 0) {
 		u32 data = be32_to_cpup((__be32 *)&cf->data[0]);
-		writel(data, &regs->cantxfg[FLEXCAN_TX_BUF_ID].data[0]);
+		flexcan_write(data, &regs->cantxfg[FLEXCAN_TX_BUF_ID].data[0]);
 	}
 	if (cf->can_dlc > 3) {
 		u32 data = be32_to_cpup((__be32 *)&cf->data[4]);
-		writel(data, &regs->cantxfg[FLEXCAN_TX_BUF_ID].data[1]);
+		flexcan_write(data, &regs->cantxfg[FLEXCAN_TX_BUF_ID].data[1]);
 	}
 
-	writel(can_id, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
-	writel(ctrl, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
+	flexcan_write(can_id, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
+	flexcan_write(ctrl, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
 
 	kfree_skb(skb);
 
@@ -464,8 +488,8 @@ static void flexcan_read_fifo(const struct net_device *dev,
 	struct flexcan_mb __iomem *mb = &regs->cantxfg[0];
 	u32 reg_ctrl, reg_id;
 
-	reg_ctrl = readl(&mb->can_ctrl);
-	reg_id = readl(&mb->can_id);
+	reg_ctrl = flexcan_read(&mb->can_ctrl);
+	reg_id = flexcan_read(&mb->can_id);
 	if (reg_ctrl & FLEXCAN_MB_CNT_IDE)
 		cf->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
 	else
@@ -475,12 +499,12 @@ static void flexcan_read_fifo(const struct net_device *dev,
 		cf->can_id |= CAN_RTR_FLAG;
 	cf->can_dlc = get_can_dlc((reg_ctrl >> 16) & 0xf);
 
-	*(__be32 *)(cf->data + 0) = cpu_to_be32(readl(&mb->data[0]));
-	*(__be32 *)(cf->data + 4) = cpu_to_be32(readl(&mb->data[1]));
+	*(__be32 *)(cf->data + 0) = cpu_to_be32(flexcan_read(&mb->data[0]));
+	*(__be32 *)(cf->data + 4) = cpu_to_be32(flexcan_read(&mb->data[1]));
 
 	/* mark as read */
-	writel(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->iflag1);
-	readl(&regs->timer);
+	flexcan_write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->iflag1);
+	flexcan_read(&regs->timer);
 }
 
 static int flexcan_read_frame(struct net_device *dev)
@@ -516,17 +540,17 @@ static int flexcan_poll(struct napi_struct *napi, int quota)
 	 * The error bits are cleared on read,
 	 * use saved value from irq handler.
 	 */
-	reg_esr = readl(&regs->esr) | priv->reg_esr;
+	reg_esr = flexcan_read(&regs->esr) | priv->reg_esr;
 
 	/* handle state changes */
 	work_done += flexcan_poll_state(dev, reg_esr);
 
 	/* handle RX-FIFO */
-	reg_iflag1 = readl(&regs->iflag1);
+	reg_iflag1 = flexcan_read(&regs->iflag1);
 	while (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE &&
 	       work_done < quota) {
 		work_done += flexcan_read_frame(dev);
-		reg_iflag1 = readl(&regs->iflag1);
+		reg_iflag1 = flexcan_read(&regs->iflag1);
 	}
 
 	/* report bus errors */
@@ -536,8 +560,8 @@ static int flexcan_poll(struct napi_struct *napi, int quota)
 	if (work_done < quota) {
 		napi_complete(napi);
 		/* enable IRQs */
-		writel(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
-		writel(priv->reg_ctrl_default, &regs->ctrl);
+		flexcan_write(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
+		flexcan_write(priv->reg_ctrl_default, &regs->ctrl);
 	}
 
 	return work_done;
@@ -551,9 +575,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	struct flexcan_regs __iomem *regs = priv->base;
 	u32 reg_iflag1, reg_esr;
 
-	reg_iflag1 = readl(&regs->iflag1);
-	reg_esr = readl(&regs->esr);
-	writel(FLEXCAN_ESR_ERR_INT, &regs->esr);	/* ACK err IRQ */
+	reg_iflag1 = flexcan_read(&regs->iflag1);
+	reg_esr = flexcan_read(&regs->esr);
+	flexcan_write(FLEXCAN_ESR_ERR_INT, &regs->esr);	/* ACK err IRQ */
 
 	/*
 	 * schedule NAPI in case of:
@@ -569,16 +593,16 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 		 * save them for later use.
 		 */
 		priv->reg_esr = reg_esr & FLEXCAN_ESR_ERR_BUS;
-		writel(FLEXCAN_IFLAG_DEFAULT & ~FLEXCAN_IFLAG_RX_FIFO_AVAILABLE,
-		       &regs->imask1);
-		writel(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
+		flexcan_write(FLEXCAN_IFLAG_DEFAULT &
+			~FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->imask1);
+		flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
 		       &regs->ctrl);
 		napi_schedule(&priv->napi);
 	}
 
 	/* FIFO overflow */
 	if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_OVERFLOW) {
-		writel(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW, &regs->iflag1);
+		flexcan_write(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW, &regs->iflag1);
 		dev->stats.rx_over_errors++;
 		dev->stats.rx_errors++;
 	}
@@ -587,7 +611,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) {
 		/* tx_bytes is incremented in flexcan_start_xmit */
 		stats->tx_packets++;
-		writel((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
+		flexcan_write((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
 		netif_wake_queue(dev);
 	}
 
@@ -601,7 +625,7 @@ static void flexcan_set_bittiming(struct net_device *dev)
 	struct flexcan_regs __iomem *regs = priv->base;
 	u32 reg;
 
-	reg = readl(&regs->ctrl);
+	reg = flexcan_read(&regs->ctrl);
 	reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
 		 FLEXCAN_CTRL_RJW(0x3) |
 		 FLEXCAN_CTRL_PSEG1(0x7) |
@@ -625,11 +649,11 @@ static void flexcan_set_bittiming(struct net_device *dev)
 		reg |= FLEXCAN_CTRL_SMP;
 
 	dev_info(dev->dev.parent, "writing ctrl=0x%08x\n", reg);
-	writel(reg, &regs->ctrl);
+	flexcan_write(reg, &regs->ctrl);
 
 	/* print chip status */
 	dev_dbg(dev->dev.parent, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
-		readl(&regs->mcr), readl(&regs->ctrl));
+		flexcan_read(&regs->mcr), flexcan_read(&regs->ctrl));
 }
 
 /*
@@ -650,10 +674,10 @@ static int flexcan_chip_start(struct net_device *dev)
 	flexcan_chip_enable(priv);
 
 	/* soft reset */
-	writel(FLEXCAN_MCR_SOFTRST, &regs->mcr);
+	flexcan_write(FLEXCAN_MCR_SOFTRST, &regs->mcr);
 	udelay(10);
 
-	reg_mcr = readl(&regs->mcr);
+	reg_mcr = flexcan_read(&regs->mcr);
 	if (reg_mcr & FLEXCAN_MCR_SOFTRST) {
 		dev_err(dev->dev.parent,
 			"Failed to softreset can module (mcr=0x%08x)\n",
@@ -675,12 +699,12 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * choose format C
 	 *
 	 */
-	reg_mcr = readl(&regs->mcr);
+	reg_mcr = flexcan_read(&regs->mcr);
 	reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT |
 		FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN |
 		FLEXCAN_MCR_IDAM_C;
 	dev_dbg(dev->dev.parent, "%s: writing mcr=0x%08x", __func__, reg_mcr);
-	writel(reg_mcr, &regs->mcr);
+	flexcan_write(reg_mcr, &regs->mcr);
 
 	/*
 	 * CTRL
@@ -698,7 +722,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * (FLEXCAN_CTRL_ERR_MSK), too. Otherwise we don't get any
 	 * warning or bus passive interrupts.
 	 */
-	reg_ctrl = readl(&regs->ctrl);
+	reg_ctrl = flexcan_read(&regs->ctrl);
 	reg_ctrl &= ~FLEXCAN_CTRL_TSYN;
 	reg_ctrl |= FLEXCAN_CTRL_BOFF_REC | FLEXCAN_CTRL_LBUF |
 		FLEXCAN_CTRL_ERR_STATE | FLEXCAN_CTRL_ERR_MSK;
@@ -706,38 +730,39 @@ static int flexcan_chip_start(struct net_device *dev)
 	/* save for later use */
 	priv->reg_ctrl_default = reg_ctrl;
 	dev_dbg(dev->dev.parent, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
-	writel(reg_ctrl, &regs->ctrl);
+	flexcan_write(reg_ctrl, &regs->ctrl);
 
 	for (i = 0; i < ARRAY_SIZE(regs->cantxfg); i++) {
-		writel(0, &regs->cantxfg[i].can_ctrl);
-		writel(0, &regs->cantxfg[i].can_id);
-		writel(0, &regs->cantxfg[i].data[0]);
-		writel(0, &regs->cantxfg[i].data[1]);
+		flexcan_write(0, &regs->cantxfg[i].can_ctrl);
+		flexcan_write(0, &regs->cantxfg[i].can_id);
+		flexcan_write(0, &regs->cantxfg[i].data[0]);
+		flexcan_write(0, &regs->cantxfg[i].data[1]);
 
 		/* put MB into rx queue */
-		writel(FLEXCAN_MB_CNT_CODE(0x4), &regs->cantxfg[i].can_ctrl);
+		flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
+			&regs->cantxfg[i].can_ctrl);
 	}
 
 	/* acceptance mask/acceptance code (accept everything) */
-	writel(0x0, &regs->rxgmask);
-	writel(0x0, &regs->rx14mask);
-	writel(0x0, &regs->rx15mask);
+	flexcan_write(0x0, &regs->rxgmask);
+	flexcan_write(0x0, &regs->rx14mask);
+	flexcan_write(0x0, &regs->rx15mask);
 
 	flexcan_transceiver_switch(priv, 1);
 
 	/* synchronize with the can bus */
-	reg_mcr = readl(&regs->mcr);
+	reg_mcr = flexcan_read(&regs->mcr);
 	reg_mcr &= ~FLEXCAN_MCR_HALT;
-	writel(reg_mcr, &regs->mcr);
+	flexcan_write(reg_mcr, &regs->mcr);
 
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
 	/* enable FIFO interrupts */
-	writel(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
+	flexcan_write(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
 
 	/* print chip status */
 	dev_dbg(dev->dev.parent, "%s: reading mcr=0x%08x ctrl=0x%08x\n",
-		__func__, readl(&regs->mcr), readl(&regs->ctrl));
+		__func__, flexcan_read(&regs->mcr), flexcan_read(&regs->ctrl));
 
 	return 0;
 
@@ -759,12 +784,12 @@ static void flexcan_chip_stop(struct net_device *dev)
 	u32 reg;
 
 	/* Disable all interrupts */
-	writel(0, &regs->imask1);
+	flexcan_write(0, &regs->imask1);
 
 	/* Disable + halt module */
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT;
-	writel(reg, &regs->mcr);
+	flexcan_write(reg, &regs->mcr);
 
 	flexcan_transceiver_switch(priv, 0);
 	priv->can.state = CAN_STATE_STOPPED;
@@ -856,24 +881,24 @@ static int __devinit register_flexcandev(struct net_device *dev)
 
 	/* select "bus clock", chip must be disabled */
 	flexcan_chip_disable(priv);
-	reg = readl(&regs->ctrl);
+	reg = flexcan_read(&regs->ctrl);
 	reg |= FLEXCAN_CTRL_CLK_SRC;
-	writel(reg, &regs->ctrl);
+	flexcan_write(reg, &regs->ctrl);
 
 	flexcan_chip_enable(priv);
 
 	/* set freeze, halt and activate FIFO, restrict register access */
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
 		FLEXCAN_MCR_FEN | FLEXCAN_MCR_SUPV;
-	writel(reg, &regs->mcr);
+	flexcan_write(reg, &regs->mcr);
 
 	/*
 	 * Currently we only support newer versions of this core
 	 * featuring a RX FIFO. Older cores found on some Coldfire
 	 * derivates are not yet supported.
 	 */
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	if (!(reg & FLEXCAN_MCR_FEN)) {
 		dev_err(dev->dev.parent,
 			"Could not enable RX FIFO, unsupported core\n");
@@ -901,16 +926,29 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
 	struct net_device *dev;
 	struct flexcan_priv *priv;
 	struct resource *mem;
-	struct clk *clk;
+	struct clk *clk = NULL;
 	void __iomem *base;
 	resource_size_t mem_size;
 	int err, irq;
+	u32 clock_freq = 0;
+
+	if (pdev->dev.of_node) {
+		const u32 *clock_freq_p;
 
-	clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "no clock defined\n");
-		err = PTR_ERR(clk);
-		goto failed_clock;
+		clock_freq_p = of_get_property(pdev->dev.of_node,
+						"clock-frequency", NULL);
+		if (clock_freq_p)
+			clock_freq = *clock_freq_p;
+	}
+
+	if (!clock_freq) {
+		clk = clk_get(&pdev->dev, NULL);
+		if (IS_ERR(clk)) {
+			dev_err(&pdev->dev, "no clock defined\n");
+			err = PTR_ERR(clk);
+			goto failed_clock;
+		}
+		clock_freq = clk_get_rate(clk);
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -943,7 +981,7 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
 	dev->flags |= IFF_ECHO; /* we support local echo in hardware */
 
 	priv = netdev_priv(dev);
-	priv->can.clock.freq = clk_get_rate(clk);
+	priv->can.clock.freq = clock_freq;
 	priv->can.bittiming_const = &flexcan_bittiming_const;
 	priv->can.do_set_mode = flexcan_set_mode;
 	priv->can.do_get_berr_counter = flexcan_get_berr_counter;
@@ -978,7 +1016,8 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
  failed_map:
 	release_mem_region(mem->start, mem_size);
  failed_get:
-	clk_put(clk);
+	if (clk)
+		clk_put(clk);
  failed_clock:
 	return err;
 }
@@ -996,15 +1035,27 @@ static int __devexit flexcan_remove(struct platform_device *pdev)
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(mem->start, resource_size(mem));
 
-	clk_put(priv->clk);
+	if (priv->clk)
+		clk_put(priv->clk);
 
 	free_candev(dev);
 
 	return 0;
 }
 
+static struct of_device_id flexcan_of_match[] = {
+	{
+		.compatible = "fsl,p1010-flexcan",
+	},
+	{},
+};
+
 static struct platform_driver flexcan_driver = {
-	.driver.name = DRV_NAME,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = flexcan_of_match,
+	},
 	.probe = flexcan_probe,
 	.remove = __devexit_p(flexcan_remove),
 };
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 92feac68b66e..ac42f5da91b5 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -62,7 +62,7 @@ static enum can_state state_map[] = {
 static int mscan_set_mode(struct net_device *dev, u8 mode)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	int ret = 0;
 	int i;
 	u8 canctl1;
@@ -138,7 +138,7 @@ static int mscan_set_mode(struct net_device *dev, u8 mode)
 static int mscan_start(struct net_device *dev)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	u8 canrflg;
 	int err;
 
@@ -178,7 +178,7 @@ static int mscan_restart(struct net_device *dev)
 	struct mscan_priv *priv = netdev_priv(dev);
 
 	if (priv->type == MSCAN_TYPE_MPC5121) {
-		struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+		struct mscan_regs __iomem *regs = priv->reg_base;
 
 		priv->can.state = CAN_STATE_ERROR_ACTIVE;
 		WARN(!(in_8(&regs->canmisc) & MSCAN_BOHOLD),
@@ -199,7 +199,7 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct can_frame *frame = (struct can_frame *)skb->data;
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	int i, rtr, buf_id;
 	u32 can_id;
 
@@ -305,7 +305,7 @@ static enum can_state check_set_state(struct net_device *dev, u8 canrflg)
 static void mscan_get_rx_frame(struct net_device *dev, struct can_frame *frame)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	u32 can_id;
 	int i;
 
@@ -343,7 +343,7 @@ static void mscan_get_err_frame(struct net_device *dev, struct can_frame *frame,
 				u8 canrflg)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct net_device_stats *stats = &dev->stats;
 	enum can_state old_state;
 
@@ -406,7 +406,7 @@ static int mscan_rx_poll(struct napi_struct *napi, int quota)
 {
 	struct mscan_priv *priv = container_of(napi, struct mscan_priv, napi);
 	struct net_device *dev = napi->dev;
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct net_device_stats *stats = &dev->stats;
 	int npackets = 0;
 	int ret = 1;
@@ -453,7 +453,7 @@ static irqreturn_t mscan_isr(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct net_device_stats *stats = &dev->stats;
 	u8 cantier, cantflg, canrflg;
 	irqreturn_t ret = IRQ_NONE;
@@ -537,7 +537,7 @@ static int mscan_do_set_mode(struct net_device *dev, enum can_mode mode)
 static int mscan_do_set_bittiming(struct net_device *dev)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct can_bittiming *bt = &priv->can.bittiming;
 	u8 btr0, btr1;
 
@@ -559,7 +559,7 @@ static int mscan_open(struct net_device *dev)
 {
 	int ret;
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 
 	/* common open */
 	ret = open_candev(dev);
@@ -598,7 +598,7 @@ exit_napi_disable:
 static int mscan_close(struct net_device *dev)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 
 	netif_stop_queue(dev);
 	napi_disable(&priv->napi);
@@ -622,7 +622,7 @@ static const struct net_device_ops mscan_netdev_ops = {
 int register_mscandev(struct net_device *dev, int mscan_clksrc)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	u8 ctl1;
 
 	ctl1 = in_8(&regs->canctl1);
@@ -659,7 +659,7 @@ int register_mscandev(struct net_device *dev, int mscan_clksrc)
 void unregister_mscandev(struct net_device *dev)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	mscan_set_mode(dev, MSCAN_INIT_MODE);
 	clrbits8(&regs->canctl1, MSCAN_CANE);
 	unregister_candev(dev);
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 231385b8e08f..c7f3d4ea1167 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -408,7 +408,7 @@ static void plx_pci_del_card(struct pci_dev *pdev)
 	struct sja1000_priv *priv;
 	int i = 0;
 
-	for (i = 0; i < card->channels; i++) {
+	for (i = 0; i < PLX_PCI_MAX_CHAN; i++) {
 		dev = card->net_dev[i];
 		if (!dev)
 			continue;
@@ -536,7 +536,6 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev,
 			if (err) {
 				dev_err(&pdev->dev, "Registering device failed "
 					"(err=%d)\n", err);
-				free_sja1000dev(dev);
 				goto failure_cleanup;
 			}
 
@@ -549,6 +548,7 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev,
 			dev_err(&pdev->dev, "Channel #%d not detected\n",
 				i + 1);
 			free_sja1000dev(dev);
+			card->net_dev[i] = NULL;
 		}
 	}
 
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index f523f1cc5142..4b70b7e8bdeb 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -197,7 +197,7 @@ static void slc_bump(struct slcan *sl)
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	memcpy(skb_put(skb, sizeof(struct can_frame)),
 	       &cf, sizeof(struct can_frame));
-	netif_rx(skb);
+	netif_rx_ni(skb);
 
 	sl->dev->stats.rx_packets++;
 	sl->dev->stats.rx_bytes += cf.can_dlc;
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index e66aceb57cef..7cb2785e209d 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -261,7 +261,7 @@ static const struct net_device_ops e100_netdev_ops = {
 	.ndo_start_xmit		= e100_send_packet,
 	.ndo_tx_timeout		= e100_tx_timeout,
 	.ndo_get_stats		= e100_get_stats,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_do_ioctl		= e100_ioctl,
 	.ndo_set_mac_address	= e100_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index 39cf9b9bd673..a7c5e8831e8c 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -116,7 +116,7 @@ static const struct net_device_ops dummy_netdev_ops = {
 	.ndo_init		= dummy_dev_init,
 	.ndo_start_xmit		= dummy_xmit,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_set_mac_address	= dummy_set_address,
 	.ndo_get_stats64	= dummy_get_stats64,
 };
diff --git a/drivers/net/3c501.c b/drivers/net/ethernet/3com/3c501.c
index 5420f6de27df..68da81d476f3 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/ethernet/3com/3c501.c
@@ -201,7 +201,7 @@ static const struct net_device_ops el_netdev_ops = {
 	.ndo_stop		= el1_close,
 	.ndo_start_xmit 	= el_start_xmit,
 	.ndo_tx_timeout		= el_timeout,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/3c501.h b/drivers/net/ethernet/3com/3c501.h
index 183fd55f03cb..183fd55f03cb 100644
--- a/drivers/net/3c501.h
+++ b/drivers/net/ethernet/3com/3c501.h
diff --git a/drivers/net/3c509.c b/drivers/net/ethernet/3com/3c509.c
index 44b28b2d7003..92053e6fc980 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/ethernet/3com/3c509.c
@@ -545,7 +545,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_stop	 	= el3_close,
 	.ndo_start_xmit 	= el3_start_xmit,
 	.ndo_get_stats 		= el3_get_stats,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_tx_timeout 	= el3_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/3c515.c b/drivers/net/ethernet/3com/3c515.c
index d2bb4b254c57..f67a5d3a200c 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/ethernet/3com/3c515.c
@@ -569,7 +569,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_start_xmit		= corkscrew_start_xmit,
 	.ndo_tx_timeout		= corkscrew_timeout,
 	.ndo_get_stats		= corkscrew_get_stats,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c
index 34c5e1cbf65d..9c01bc9235b3 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/ethernet/3com/3c574_cs.c
@@ -255,7 +255,7 @@ static const struct net_device_ops el3_netdev_ops = {
 	.ndo_tx_timeout 	= el3_tx_timeout,
 	.ndo_get_stats		= el3_get_stats,
 	.ndo_do_ioctl		= el3_ioctl,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
index 4a1a35809807..972f80ecc510 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/ethernet/3com/3c589_cs.c
@@ -184,7 +184,7 @@ static const struct net_device_ops el3_netdev_ops = {
 	.ndo_tx_timeout		= el3_tx_timeout,
 	.ndo_set_config		= el3_config,
 	.ndo_get_stats		= el3_get_stats,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 8cc22568ebd3..6e1f5959a654 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -1055,7 +1055,7 @@ static const struct net_device_ops boomrang_netdev_ops = {
 #ifdef CONFIG_PCI
 	.ndo_do_ioctl 		= vortex_ioctl,
 #endif
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -1073,7 +1073,7 @@ static const struct net_device_ops vortex_netdev_ops = {
 #ifdef CONFIG_PCI
 	.ndo_do_ioctl 		= vortex_ioctl,
 #endif
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
new file mode 100644
index 000000000000..a439cbdda3b9
--- /dev/null
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -0,0 +1,121 @@
+#
+# 3Com Ethernet device configuration
+#
+
+config NET_VENDOR_3COM
+	bool "3Com devices"
+	default y
+	depends on ISA || EISA || MCA || PCI || PCMCIA
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about 3Com cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_3COM
+
+config EL1
+	tristate "3c501 \"EtherLink\" support"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Also, consider buying a
+	  new card, since the 3c501 is slow, broken, and obsolete: you will
+	  have problems.  Some people suggest to ping ("man ping") a nearby
+	  machine every minute ("man cron") when using this card.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c501.
+
+config EL3
+	tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+	depends on (ISA || EISA || MCA)
+	---help---
+	  If you have a network (Ethernet) card belonging to the 3Com
+	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+	  from <http://www.tldp.org/docs.html#howto>.
+
+	  If your card is not working you may need to use the DOS
+	  setup disk to disable Plug & Play mode, and to select the default
+	  media type.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c509.
+
+config 3C515
+	tristate "3c515 ISA \"Fast EtherLink\""
+	depends on (ISA || EISA) && ISA_DMA_API
+	---help---
+	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+	  network card, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c515.
+
+config PCMCIA_3C574
+	tristate "3Com 3c574 PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
+	  (PC-card) Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called 3c574_cs.  If unsure, say N.
+
+config PCMCIA_3C589
+	tristate "3Com 3c589 PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
+	  (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called 3c589_cs.  If unsure, say N.
+
+config VORTEX
+	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+	depends on (PCI || EISA)
+	select MII
+	---help---
+	  This option enables driver support for a large number of 10Mbps and
+	  10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
+
+	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
+	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
+	  "Tornado"   (3c905)                                  PCI
+	  "Hurricane" (3c555/3cSOHO)                           PCI
+
+	  If you have such a card, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>. More
+	  specific information is in
+	  <file:Documentation/networking/vortex.txt> and in the comments at
+	  the beginning of <file:drivers/net/3c59x.c>.
+
+	  To compile this support as a module, choose M here.
+
+config TYPHOON
+	tristate "3cr990 series \"Typhoon\" support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This option enables driver support for the 3cr990 series of cards:
+
+	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called typhoon.
+
+endif # NET_VENDOR_3COM
diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile
new file mode 100644
index 000000000000..1e5382a30ead
--- /dev/null
+++ b/drivers/net/ethernet/3com/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the 3Com Ethernet device drivers
+#
+
+obj-$(CONFIG_EL1) += 3c501.o
+obj-$(CONFIG_EL3) += 3c509.o
+obj-$(CONFIG_3C515) += 3c515.o
+obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
+obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
+obj-$(CONFIG_VORTEX) += 3c59x.o
+obj-$(CONFIG_TYPHOON) += typhoon.o
diff --git a/drivers/net/typhoon.c b/drivers/net/ethernet/3com/typhoon.c
index 1d5091a1e49a..f1dc9acf6105 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/ethernet/3com/typhoon.c
@@ -2266,7 +2266,7 @@ static const struct net_device_ops typhoon_netdev_ops = {
 	.ndo_open		= typhoon_open,
 	.ndo_stop		= typhoon_close,
 	.ndo_start_xmit		= typhoon_start_tx,
-	.ndo_set_multicast_list	= typhoon_set_rx_mode,
+	.ndo_set_rx_mode	= typhoon_set_rx_mode,
 	.ndo_tx_timeout		= typhoon_tx_timeout,
 	.ndo_get_stats		= typhoon_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/typhoon.h b/drivers/net/ethernet/3com/typhoon.h
index 88187fc84aa3..88187fc84aa3 100644
--- a/drivers/net/typhoon.h
+++ b/drivers/net/ethernet/3com/typhoon.h
diff --git a/drivers/net/3c503.c b/drivers/net/ethernet/8390/3c503.c
index 84e68f1b9adf..fbab1367505f 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/ethernet/8390/3c503.c
@@ -176,7 +176,7 @@ static const struct net_device_ops el2_netdev_ops = {
 	.ndo_start_xmit		= eip_start_xmit,
 	.ndo_tx_timeout		= eip_tx_timeout,
 	.ndo_get_stats		= eip_get_stats,
-	.ndo_set_multicast_list = eip_set_multicast_list,
+	.ndo_set_rx_mode	= eip_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/3c503.h b/drivers/net/ethernet/8390/3c503.h
index e2367b82a2ec..e2367b82a2ec 100644
--- a/drivers/net/3c503.h
+++ b/drivers/net/ethernet/8390/3c503.h
diff --git a/drivers/net/8390.c b/drivers/net/ethernet/8390/8390.c
index 7c7518be1756..5db1f55abef4 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/ethernet/8390/8390.c
@@ -61,7 +61,7 @@ const struct net_device_ops ei_netdev_ops = {
 	.ndo_start_xmit		= ei_start_xmit,
 	.ndo_tx_timeout		= ei_tx_timeout,
 	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/8390.h b/drivers/net/ethernet/8390/8390.h
index 58a12e4c78f9..58a12e4c78f9 100644
--- a/drivers/net/8390.h
+++ b/drivers/net/ethernet/8390/8390.h
diff --git a/drivers/net/8390p.c b/drivers/net/ethernet/8390/8390p.c
index a2a64ea0b691..e8fc2e87e840 100644
--- a/drivers/net/8390p.c
+++ b/drivers/net/ethernet/8390/8390p.c
@@ -66,7 +66,7 @@ const struct net_device_ops eip_netdev_ops = {
 	.ndo_start_xmit		= eip_start_xmit,
 	.ndo_tx_timeout		= eip_tx_timeout,
 	.ndo_get_stats		= eip_get_stats,
-	.ndo_set_multicast_list = eip_set_multicast_list,
+	.ndo_set_rx_mode	= eip_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
new file mode 100644
index 000000000000..e04ade444247
--- /dev/null
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -0,0 +1,337 @@
+#
+# 8390 device configuration
+#
+
+config NET_VENDOR_8390
+	bool "National Semi-conductor 8390 devices"
+	default y
+	depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
+		   ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
+		   MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \
+		   EXPERIMENTAL)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Western Digital cards. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_VENDOR_8390
+
+config EL2
+	tristate "3c503 \"EtherLink II\" support"
+	depends on ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c503.
+
+config AC3200
+	tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
+	depends on PCI && (ISA || EISA) && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ac3200.
+
+config PCMCIA_AXNET
+	tristate "Asix AX88190 PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
+	  (PC-card) Fast Ethernet card to your computer.  These cards are
+	  nearly NE2000 compatible but need a separate driver due to a few
+	  misfeatures.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called axnet_cs.  If unsure, say N.
+
+config AX88796
+	tristate "ASIX AX88796 NE2000 clone support"
+	depends on (ARM || MIPS || SUPERH)
+	select PHYLIB
+	select MDIO_BITBANG
+	---help---
+	  AX88796 driver, using platform bus to provide
+	  chip detection and resources
+
+config AX88796_93CX6
+	bool "ASIX AX88796 external 93CX6 eeprom support"
+	depends on AX88796
+	select EEPROM_93CX6
+	---help---
+	  Select this if your platform comes with an external 93CX6 eeprom.
+
+config E2100
+	tristate "Cabletron E21xx support"
+	depends on ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called e2100.
+
+config ES3210
+	tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
+	depends on PCI && EISA && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called es3210.
+
+config HPLAN_PLUS
+	tristate "HP PCLAN+ (27247B and 27252A) support"
+	depends on ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called hp-plus.
+
+config HPLAN
+	tristate "HP PCLAN (27245 and other 27xxx series) support"
+	depends on ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called hp.
+
+config HYDRA
+	tristate "Hydra support"
+	depends on ZORRO
+	select CRC32
+	---help---
+	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hydra.
+
+config ARM_ETHERH
+	tristate "I-cubed EtherH/ANT EtherM support"
+	depends on ARM && ARCH_ACORN
+	select CRC32
+	---help---
+	  If you have an Acorn system with one of these network cards, you
+	  should say Y to this option if you wish to use it with Linux.
+
+config LNE390
+	tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
+	depends on PCI && EISA && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called lne390.
+
+config MAC8390
+	bool "Macintosh NS 8390 based ethernet cards"
+	depends on MAC
+	select CRC32
+	---help---
+	  If you want to include a driver to support Nubus or LC-PDS
+	  Ethernet cards using an NS8390 chipset or its equivalent, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config NE2000
+	tristate "NE2000/NE1000 support"
+	depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
+	  without a specific driver are compatible with NE2000.
+
+	  If you have a PCI NE2000 card however, say N here and Y to "PCI
+	  NE2000 and clone support" under "EISA, VLB, PCI and on board
+	  controllers" below. If you have a NE2000 card and are running on
+	  an MCA system (a bus system used on some IBM PS/2 computers and
+	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
+	  below.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne.
+
+config NE2_MCA
+	tristate "NE/2 (ne2000 MCA version) support"
+	depends on MCA_LEGACY
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne2.
+
+config NE2K_PCI
+	tristate "PCI NE2000 and clones support (see help)"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is for NE2000 compatible PCI cards. It will not work
+	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+	  support" below). If you have a PCI NE2000 network (Ethernet) card,
+	  say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  This driver also works for the following NE2000 clone cards:
+	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
+	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
+	  Holtek HT80232    Holtek HT80229
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne2k-pci.
+
+config APNE
+	tristate "PCMCIA NE2000 support"
+	depends on AMIGA_PCMCIA
+	select CRC32
+	---help---
+	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called apne.
+
+config NE3210
+	tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
+	depends on PCI && EISA && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that this driver
+	  will NOT WORK for NE3200 cards as they are completely different.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne3210.
+
+config PCMCIA_PCNET
+	tristate "NE2000 compatible PCMCIA support"
+	depends on PCMCIA
+	select CRC32
+	---help---
+	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
+	  (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called pcnet_cs.  If unsure, say N.
+
+config NE_H8300
+	tristate "NE2000 compatible support for H8/300"
+	depends on H8300
+	---help---
+	  Say Y here if you want to use the NE2000 compatible
+	  controller on the Renesas H8/300 processor.
+
+config STNIC
+	tristate "National DP83902AV  support"
+	depends on SUPERH
+	select CRC32
+	---help---
+	  Support for cards based on the National Semiconductor DP83902AV
+	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
+	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
+	  <http://www.national.com/pf/DP/DP83902A.html>.
+
+	  If unsure, say N.
+
+config ULTRAMCA
+	tristate "SMC Ultra MCA support"
+	depends on MCA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type and are running
+	  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc-mca.
+
+config ULTRA
+	tristate "SMC Ultra support"
+	depends on ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Important: There have been many reports that, with some motherboards
+	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+	  such as some BusLogic models) causes corruption problems with many
+	  operating systems. The Linux smc-ultra driver has a work-around for
+	  this but keep it in mind if you have such a SCSI card and have
+	  problems.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc-ultra.
+
+config ULTRA32
+	tristate "SMC Ultra32 EISA support"
+	depends on EISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc-ultra32.
+
+config WD80x3
+	tristate "WD80*3 support"
+	depends on ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called wd.
+
+config ZORRO8390
+	tristate "Zorro NS8390-based Ethernet support"
+	depends on ZORRO
+	select CRC32
+	---help---
+	  This driver is for Zorro Ethernet cards using an NS8390-compatible
+	  chipset, like the Village Tronic Ariadne II and the Individual
+	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called zorro8390.
+
+endif # NET_VENDOR_8390
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
new file mode 100644
index 000000000000..3337d7fb4344
--- /dev/null
+++ b/drivers/net/ethernet/8390/Makefile
@@ -0,0 +1,29 @@
+#
+# Makefile for the 8390 network device drivers.
+#
+
+obj-$(CONFIG_MAC8390) += mac8390.o
+obj-$(CONFIG_AC3200) += ac3200.o 8390.o
+obj-$(CONFIG_APNE) += apne.o 8390.o
+obj-$(CONFIG_ARM_ETHERH) += etherh.o
+obj-$(CONFIG_AX88796) += ax88796.o
+obj-$(CONFIG_E2100) += e2100.o 8390.o
+obj-$(CONFIG_EL2) += 3c503.o 8390p.o
+obj-$(CONFIG_ES3210) += es3210.o 8390.o
+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
+obj-$(CONFIG_HPLAN) += hp.o 8390p.o
+obj-$(CONFIG_HYDRA) += hydra.o 8390.o
+obj-$(CONFIG_LNE390) += lne390.o 8390.o
+obj-$(CONFIG_NE2000) += ne.o 8390p.o
+obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
+obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
+obj-$(CONFIG_NE3210) += ne3210.o 8390.o
+obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
+obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
+obj-$(CONFIG_STNIC) += stnic.o 8390.o
+obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
+obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
+obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
+obj-$(CONFIG_WD80x3) += wd.o 8390.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
diff --git a/drivers/net/ac3200.c b/drivers/net/ethernet/8390/ac3200.c
index f07b2e980fbc..5337dd0a59b0 100644
--- a/drivers/net/ac3200.c
+++ b/drivers/net/ethernet/8390/ac3200.c
@@ -151,7 +151,7 @@ static const struct net_device_ops ac_netdev_ops = {
 	.ndo_start_xmit		= ei_start_xmit,
 	.ndo_tx_timeout		= ei_tx_timeout,
 	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/apne.c b/drivers/net/ethernet/8390/apne.c
index 547737340cbb..547737340cbb 100644
--- a/drivers/net/apne.c
+++ b/drivers/net/ethernet/8390/apne.c
diff --git a/drivers/net/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index e7cb8c8b9776..e9f8432f55b4 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -543,7 +543,7 @@ static const struct net_device_ops ax_netdev_ops = {
 	.ndo_start_xmit		= ax_ei_start_xmit,
 	.ndo_tx_timeout		= ax_ei_tx_timeout,
 	.ndo_get_stats		= ax_ei_get_stats,
-	.ndo_set_multicast_list = ax_ei_set_multicast_list,
+	.ndo_set_rx_mode	= ax_ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c
index 9953db711969..bba51cdc74a1 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/ethernet/8390/axnet_cs.c
@@ -38,7 +38,7 @@
 #include <linux/etherdevice.h>
 #include <linux/crc32.h>
 #include <linux/mii.h>
-#include "../8390.h"
+#include "8390.h"
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -134,7 +134,7 @@ static const struct net_device_ops axnet_netdev_ops = {
 	.ndo_start_xmit		= axnet_start_xmit,
 	.ndo_tx_timeout		= axnet_tx_timeout,
 	.ndo_get_stats		= get_stats,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/e2100.c b/drivers/net/ethernet/8390/e2100.c
index d50a9998ae77..d16dc53c1813 100644
--- a/drivers/net/e2100.c
+++ b/drivers/net/ethernet/8390/e2100.c
@@ -168,7 +168,7 @@ static const struct net_device_ops e21_netdev_ops = {
 	.ndo_start_xmit		= ei_start_xmit,
 	.ndo_tx_timeout		= ei_tx_timeout,
 	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/es3210.c b/drivers/net/ethernet/8390/es3210.c
index 7a09575ecff0..7a09575ecff0 100644
--- a/drivers/net/es3210.c
+++ b/drivers/net/ethernet/8390/es3210.c
diff --git a/drivers/net/arm/etherh.c b/drivers/net/ethernet/8390/etherh.c
index 03e217a868d4..48c4948750d1 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/ethernet/8390/etherh.c
@@ -65,7 +65,7 @@
 static char version[] __initdata =
 	"EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
 
-#include "../lib8390.c"
+#include "lib8390.c"
 
 static unsigned int net_debug = NET_DEBUG;
 
@@ -644,7 +644,7 @@ static const struct net_device_ops etherh_netdev_ops = {
 	.ndo_start_xmit		= __ei_start_xmit,
 	.ndo_tx_timeout		= __ei_tx_timeout,
 	.ndo_get_stats		= __ei_get_stats,
-	.ndo_set_multicast_list = __ei_set_multicast_list,
+	.ndo_set_rx_mode	= __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
index 29917363ebfb..eeac843dcd2d 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/ethernet/8390/hp-plus.c
@@ -165,7 +165,7 @@ static const struct net_device_ops hpp_netdev_ops = {
 	.ndo_start_xmit		= eip_start_xmit,
 	.ndo_tx_timeout		= eip_tx_timeout,
 	.ndo_get_stats		= eip_get_stats,
-	.ndo_set_multicast_list = eip_set_multicast_list,
+	.ndo_set_rx_mode	= eip_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/hp.c b/drivers/net/ethernet/8390/hp.c
index 18564d4a7c04..18564d4a7c04 100644
--- a/drivers/net/hp.c
+++ b/drivers/net/ethernet/8390/hp.c
diff --git a/drivers/net/hydra.c b/drivers/net/ethernet/8390/hydra.c
index 1cd481c04202..3dac937a67c4 100644
--- a/drivers/net/hydra.c
+++ b/drivers/net/ethernet/8390/hydra.c
@@ -101,7 +101,7 @@ static const struct net_device_ops hydra_netdev_ops = {
 	.ndo_start_xmit		= __ei_start_xmit,
 	.ndo_tx_timeout		= __ei_tx_timeout,
 	.ndo_get_stats		= __ei_get_stats,
-	.ndo_set_multicast_list = __ei_set_multicast_list,
+	.ndo_set_rx_mode	= __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/lib8390.c b/drivers/net/ethernet/8390/lib8390.c
index 05ae21435bfd..05ae21435bfd 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/ethernet/8390/lib8390.c
diff --git a/drivers/net/lne390.c b/drivers/net/ethernet/8390/lne390.c
index f9888d20177b..f9888d20177b 100644
--- a/drivers/net/lne390.c
+++ b/drivers/net/ethernet/8390/lne390.c
diff --git a/drivers/net/mac8390.c b/drivers/net/ethernet/8390/mac8390.c
index f84f5e6ededb..af5d9822cad9 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/ethernet/8390/mac8390.c
@@ -494,7 +494,7 @@ static const struct net_device_ops mac8390_netdev_ops = {
 	.ndo_start_xmit		= __ei_start_xmit,
 	.ndo_tx_timeout		= __ei_tx_timeout,
 	.ndo_get_stats		= __ei_get_stats,
-	.ndo_set_multicast_list = __ei_set_multicast_list,
+	.ndo_set_rx_mode	= __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c
index 7298a34bc795..cd36a6a5f408 100644
--- a/drivers/net/ne-h8300.c
+++ b/drivers/net/ethernet/8390/ne-h8300.c
@@ -200,7 +200,7 @@ static const struct net_device_ops ne_netdev_ops = {
 	.ndo_start_xmit		= __ei_start_xmit,
 	.ndo_tx_timeout		= __ei_tx_timeout,
 	.ndo_get_stats		= __ei_get_stats,
-	.ndo_set_multicast_list = __ei_set_multicast_list,
+	.ndo_set_rx_mode	= __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/ne.c b/drivers/net/ethernet/8390/ne.c
index 1063093b3afc..1063093b3afc 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
diff --git a/drivers/net/ne2.c b/drivers/net/ethernet/8390/ne2.c
index 70cdc6996342..70cdc6996342 100644
--- a/drivers/net/ne2.c
+++ b/drivers/net/ethernet/8390/ne2.c
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c
index 3c333cb5d34e..39923425ba25 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ethernet/8390/ne2k-pci.c
@@ -207,7 +207,7 @@ static const struct net_device_ops ne2k_netdev_ops = {
 	.ndo_start_xmit		= ei_start_xmit,
 	.ndo_tx_timeout		= ei_tx_timeout,
 	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/ne3210.c b/drivers/net/ethernet/8390/ne3210.c
index 243ed2aee88e..243ed2aee88e 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ethernet/8390/ne3210.c
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c
index b4fd7c3ed077..053b2551a72d 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/ethernet/8390/pcnet_cs.c
@@ -41,7 +41,7 @@
 #include <linux/log2.h>
 #include <linux/etherdevice.h>
 #include <linux/mii.h>
-#include "../8390.h"
+#include "8390.h"
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -227,7 +227,7 @@ static const struct net_device_ops pcnet_netdev_ops = {
 	.ndo_start_xmit 	= ei_start_xmit,
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_do_ioctl 		= ei_ioctl,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_tx_timeout 	= ei_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/smc-mca.c b/drivers/net/ethernet/8390/smc-mca.c
index 34934fb23b97..77efec44fea0 100644
--- a/drivers/net/smc-mca.c
+++ b/drivers/net/ethernet/8390/smc-mca.c
@@ -191,7 +191,7 @@ static const struct net_device_ops ultramca_netdev_ops = {
 	.ndo_start_xmit		= ei_start_xmit,
 	.ndo_tx_timeout		= ei_tx_timeout,
 	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c
index ba44ede29198..1cc306a83ff7 100644
--- a/drivers/net/smc-ultra.c
+++ b/drivers/net/ethernet/8390/smc-ultra.c
@@ -192,7 +192,7 @@ static const struct net_device_ops ultra_netdev_ops = {
 	.ndo_start_xmit		= ei_start_xmit,
 	.ndo_tx_timeout		= ei_tx_timeout,
 	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/smc-ultra32.c b/drivers/net/ethernet/8390/smc-ultra32.c
index e459c3b2510a..bb87053eb3da 100644
--- a/drivers/net/smc-ultra32.c
+++ b/drivers/net/ethernet/8390/smc-ultra32.c
@@ -160,7 +160,7 @@ static const struct net_device_ops ultra32_netdev_ops = {
 	.ndo_start_xmit		= ei_start_xmit,
 	.ndo_tx_timeout		= ei_tx_timeout,
 	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/stnic.c b/drivers/net/ethernet/8390/stnic.c
index d85f0a84bc7b..d85f0a84bc7b 100644
--- a/drivers/net/stnic.c
+++ b/drivers/net/ethernet/8390/stnic.c
diff --git a/drivers/net/wd.c b/drivers/net/ethernet/8390/wd.c
index 8831a3393ecf..c175fadb597b 100644
--- a/drivers/net/wd.c
+++ b/drivers/net/ethernet/8390/wd.c
@@ -153,7 +153,7 @@ static const struct net_device_ops wd_netdev_ops = {
 	.ndo_start_xmit		= ei_start_xmit,
 	.ndo_tx_timeout		= ei_tx_timeout,
 	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_set_rx_mode	= ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c
index 15e7751a273c..3aa9fe9999b5 100644
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/ethernet/8390/zorro8390.c
@@ -278,7 +278,7 @@ static const struct net_device_ops zorro8390_netdev_ops = {
 	.ndo_start_xmit		= __ei_start_xmit,
 	.ndo_tx_timeout		= __ei_tx_timeout,
 	.ndo_get_stats		= __ei_get_stats,
-	.ndo_set_multicast_list = __ei_set_multicast_list,
+	.ndo_set_rx_mode	= __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
new file mode 100644
index 000000000000..1f647471e651
--- /dev/null
+++ b/drivers/net/ethernet/Kconfig
@@ -0,0 +1,173 @@
+#
+# Ethernet LAN device configuration
+#
+
+menuconfig ETHERNET
+	bool "Ethernet driver support"
+	depends on NET
+	default y
+	---help---
+	  This section contains all the Ethernet device drivers.
+
+if ETHERNET
+
+config MDIO
+	tristate
+
+config SUNGEM_PHY
+	tristate
+
+source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/adaptec/Kconfig"
+source "drivers/net/ethernet/aeroflex/Kconfig"
+source "drivers/net/ethernet/alteon/Kconfig"
+source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/apple/Kconfig"
+source "drivers/net/ethernet/atheros/Kconfig"
+source "drivers/net/ethernet/cadence/Kconfig"
+source "drivers/net/ethernet/adi/Kconfig"
+source "drivers/net/ethernet/broadcom/Kconfig"
+source "drivers/net/ethernet/brocade/Kconfig"
+source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/cirrus/Kconfig"
+source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/davicom/Kconfig"
+
+config DNET
+	tristate "Dave ethernet support (DNET)"
+	depends on HAS_IOMEM
+	select PHYLIB
+	---help---
+	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
+	  Say Y to include support for the DNET chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dnet.
+
+source "drivers/net/ethernet/dec/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
+source "drivers/net/ethernet/emulex/Kconfig"
+source "drivers/net/ethernet/neterion/Kconfig"
+source "drivers/net/ethernet/faraday/Kconfig"
+source "drivers/net/ethernet/freescale/Kconfig"
+source "drivers/net/ethernet/fujitsu/Kconfig"
+source "drivers/net/ethernet/hp/Kconfig"
+source "drivers/net/ethernet/ibm/Kconfig"
+source "drivers/net/ethernet/intel/Kconfig"
+source "drivers/net/ethernet/i825xx/Kconfig"
+source "drivers/net/ethernet/xscale/Kconfig"
+source "drivers/net/ethernet/icplus/Kconfig"
+
+config JME
+	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the PCI-Express gigabit ethernet adapters
+	  based on JMicron JMC250 chipset.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called jme.
+
+config KORINA
+	tristate "Korina (IDT RC32434) Ethernet support"
+	depends on MIKROTIK_RB532
+	---help---
+	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
+	  based system say Y. Otherwise say N.
+
+config LANTIQ_ETOP
+	tristate "Lantiq SoC ETOP driver"
+	depends on SOC_TYPE_XWAY
+	---help---
+	  Support for the MII0 inside the Lantiq SoC
+
+source "drivers/net/ethernet/marvell/Kconfig"
+source "drivers/net/ethernet/mellanox/Kconfig"
+source "drivers/net/ethernet/micrel/Kconfig"
+source "drivers/net/ethernet/microchip/Kconfig"
+
+config MIPS_SIM_NET
+	tristate "MIPS simulator Network device"
+	depends on MIPS_SIM
+	---help---
+	  The MIPSNET device is a simple Ethernet network device which is
+	  emulated by the MIPS Simulator.
+	  If you are not using a MIPSsim or are unsure, say N.
+
+source "drivers/net/ethernet/myricom/Kconfig"
+
+config FEALNX
+	tristate "Myson MTD-8xx PCI Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
+	  cards. <http://www.myson.com.tw/>
+
+source "drivers/net/ethernet/natsemi/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
+
+config NET_NETX
+	tristate "NetX Ethernet support"
+	select MII
+	depends on ARCH_NETX
+	---help---
+	  This is support for the Hilscher netX builtin Ethernet ports
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called netx-eth.
+
+source "drivers/net/ethernet/nuvoton/Kconfig"
+source "drivers/net/ethernet/nvidia/Kconfig"
+source "drivers/net/ethernet/octeon/Kconfig"
+source "drivers/net/ethernet/oki-semi/Kconfig"
+
+config ETHOC
+	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
+	depends on HAS_IOMEM && HAS_DMA
+	select MII
+	select PHYLIB
+	select CRC32
+	select BITREVERSE
+	---help---
+	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
+
+source "drivers/net/ethernet/packetengines/Kconfig"
+source "drivers/net/ethernet/pasemi/Kconfig"
+source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/racal/Kconfig"
+source "drivers/net/ethernet/realtek/Kconfig"
+source "drivers/net/ethernet/renesas/Kconfig"
+source "drivers/net/ethernet/rdc/Kconfig"
+
+config S6GMAC
+	tristate "S6105 GMAC ethernet support"
+	depends on XTENSA_VARIANT_S6000
+	select PHYLIB
+	---help---
+	  This driver supports the on chip ethernet device on the
+	  S6105 xtensa processor.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called s6gmac.
+
+source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/sis/Kconfig"
+source "drivers/net/ethernet/sfc/Kconfig"
+source "drivers/net/ethernet/sgi/Kconfig"
+source "drivers/net/ethernet/smsc/Kconfig"
+source "drivers/net/ethernet/stmicro/Kconfig"
+source "drivers/net/ethernet/sun/Kconfig"
+source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/ti/Kconfig"
+source "drivers/net/ethernet/tile/Kconfig"
+source "drivers/net/ethernet/toshiba/Kconfig"
+source "drivers/net/ethernet/tundra/Kconfig"
+source "drivers/net/ethernet/via/Kconfig"
+source "drivers/net/ethernet/xilinx/Kconfig"
+source "drivers/net/ethernet/xircom/Kconfig"
+
+endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
new file mode 100644
index 000000000000..c53ad3afc991
--- /dev/null
+++ b/drivers/net/ethernet/Makefile
@@ -0,0 +1,74 @@
+#
+# Makefile for the Linux network Ethernet device drivers.
+#
+
+obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
+obj-$(CONFIG_NET_VENDOR_8390) += 8390/
+obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
+obj-$(CONFIG_GRETH) += aeroflex/
+obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
+obj-$(CONFIG_NET_VENDOR_AMD) += amd/
+obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
+obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
+obj-$(CONFIG_NET_ATMEL) += cadence/
+obj-$(CONFIG_NET_BFIN) += adi/
+obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
+obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
+obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
+obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_DM9000) += davicom/
+obj-$(CONFIG_DNET) += dnet.o
+obj-$(CONFIG_NET_VENDOR_DEC) += dec/
+obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
+obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
+obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
+obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
+obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/
+obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/
+obj-$(CONFIG_NET_VENDOR_HP) += hp/
+obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
+obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
+obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
+obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
+obj-$(CONFIG_IP1000) += icplus/
+obj-$(CONFIG_JME) += jme.o
+obj-$(CONFIG_KORINA) += korina.o
+obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
+obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
+obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/
+obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
+obj-$(CONFIG_FEALNX) += fealnx.o
+obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
+obj-$(CONFIG_NET_NETX) += netx-eth.o
+obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
+obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/
+obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
+obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
+obj-$(CONFIG_ETHOC) += ethoc.o
+obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
+obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
+obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+obj-$(CONFIG_SH_ETH) += renesas/
+obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
+obj-$(CONFIG_S6GMAC) += s6gmac.o
+obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
+obj-$(CONFIG_NET_VENDOR_SIS) += sis/
+obj-$(CONFIG_SFC) += sfc/
+obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
+obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
+obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
+obj-$(CONFIG_NET_VENDOR_SUN) += sun/
+obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_TI) += ti/
+obj-$(CONFIG_TILE_NET) += tile/
+obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
+obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
+obj-$(CONFIG_NET_VENDOR_VIA) += via/
+obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
+obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig
new file mode 100644
index 000000000000..5c804bbe3dab
--- /dev/null
+++ b/drivers/net/ethernet/adaptec/Kconfig
@@ -0,0 +1,35 @@
+#
+# Adaptec network device configuration
+#
+
+config NET_VENDOR_ADAPTEC
+	bool "Adaptec devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Adaptec cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_ADAPTEC
+
+config ADAPTEC_STARFIRE
+	tristate "Adaptec Starfire/DuraLAN support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
+	  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
+	  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called starfire.  This is recommended.
+
+endif # NET_VENDOR_ADAPTEC
diff --git a/drivers/net/ethernet/adaptec/Makefile b/drivers/net/ethernet/adaptec/Makefile
new file mode 100644
index 000000000000..6c07b758ac0a
--- /dev/null
+++ b/drivers/net/ethernet/adaptec/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Adaptec network device drivers.
+#
+
+obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
diff --git a/drivers/net/starfire.c b/drivers/net/ethernet/adaptec/starfire.c
index 7ae1f990a98e..df51fdd72353 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/ethernet/adaptec/starfire.c
@@ -639,7 +639,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_start_xmit		= start_tx,
 	.ndo_tx_timeout		= tx_timeout,
 	.ndo_get_stats		= get_stats,
-	.ndo_set_multicast_list = &set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_do_ioctl		= netdev_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig
new file mode 100644
index 000000000000..6de9851045cb
--- /dev/null
+++ b/drivers/net/ethernet/adi/Kconfig
@@ -0,0 +1,68 @@
+#
+# Blackfin device configuration
+#
+
+config NET_BFIN
+	bool "Blackfin devices"
+	depends on BF516 || BF518 || BF526 || BF527 || BF536 || BF537
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  If unsure, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the remaining Blackfin card questions. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_BFIN
+
+config BFIN_MAC
+	tristate "Blackfin on-chip MAC support"
+	depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
+	select CRC32
+	select MII
+	select PHYLIB
+	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
+	---help---
+	  This is the driver for Blackfin on-chip mac device. Say Y if you want
+	  it compiled into the kernel. This driver is also available as a
+	  module ( = code which can be inserted in and removed from the running
+	  kernel whenever you want). The module will be called bfin_mac.
+
+config BFIN_MAC_USE_L1
+	bool "Use L1 memory for rx/tx packets"
+	depends on BFIN_MAC && (BF527 || BF537)
+	default y
+	---help---
+	  To get maximum network performance, you should use L1 memory as rx/tx
+	  buffers. Say N here if you want to reserve L1 memory for other uses.
+
+config BFIN_TX_DESC_NUM
+	int "Number of transmit buffer packets"
+	depends on BFIN_MAC
+	range 6 10 if BFIN_MAC_USE_L1
+	range 10 100
+	default "10"
+	---help---
+	  Set the number of buffer packets used in driver.
+
+config BFIN_RX_DESC_NUM
+	int "Number of receive buffer packets"
+	depends on BFIN_MAC
+	range 20 100 if BFIN_MAC_USE_L1
+	range 20 800
+	default "20"
+	---help---
+	  Set the number of buffer packets used in driver.
+
+config BFIN_MAC_USE_HWSTAMP
+	bool "Use IEEE 1588 hwstamp"
+	depends on BFIN_MAC && BF518
+	default y
+	---help---
+	  To support the IEEE 1588 Precision Time Protocol (PTP), select y here
+
+endif # NET_BFIN
diff --git a/drivers/net/ethernet/adi/Makefile b/drivers/net/ethernet/adi/Makefile
new file mode 100644
index 000000000000..b1fbe195d0e8
--- /dev/null
+++ b/drivers/net/ethernet/adi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Blackfin device drivers.
+#
+
+obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
diff --git a/drivers/net/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
index 6c019e148546..b6d69c91db96 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/ethernet/adi/bfin_mac.c
@@ -1449,7 +1449,7 @@ static const struct net_device_ops bfin_mac_netdev_ops = {
 	.ndo_start_xmit		= bfin_mac_hard_start_xmit,
 	.ndo_set_mac_address	= bfin_mac_set_mac_address,
 	.ndo_tx_timeout		= bfin_mac_timeout,
-	.ndo_set_multicast_list	= bfin_mac_set_multicast_list,
+	.ndo_set_rx_mode	= bfin_mac_set_multicast_list,
 	.ndo_do_ioctl           = bfin_mac_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/bfin_mac.h b/drivers/net/ethernet/adi/bfin_mac.h
index f8559ac9a403..f8559ac9a403 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/ethernet/adi/bfin_mac.h
diff --git a/drivers/net/ethernet/aeroflex/Kconfig b/drivers/net/ethernet/aeroflex/Kconfig
new file mode 100644
index 000000000000..4f4a8d78fd54
--- /dev/null
+++ b/drivers/net/ethernet/aeroflex/Kconfig
@@ -0,0 +1,11 @@
+#
+# Aeroflex Gaisler network device configuration
+#
+
+config GRETH
+	tristate "Aeroflex Gaisler GRETH Ethernet MAC support"
+	depends on SPARC
+	select PHYLIB
+	select CRC32
+	---help---
+	  Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
diff --git a/drivers/net/ethernet/aeroflex/Makefile b/drivers/net/ethernet/aeroflex/Makefile
new file mode 100644
index 000000000000..6e62a679282f
--- /dev/null
+++ b/drivers/net/ethernet/aeroflex/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Aeroflex Gaisler network device drivers.
+#
+
+obj-$(CONFIG_GRETH) += greth.o
diff --git a/drivers/net/greth.c b/drivers/net/ethernet/aeroflex/greth.c
index 16ce45c11934..a5f6b07f8f3e 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/ethernet/aeroflex/greth.c
@@ -1539,7 +1539,7 @@ static int __devinit greth_of_probe(struct platform_device *ofdev)
 	}
 
 	if (greth->multicast) {
-		greth_netdev_ops.ndo_set_multicast_list = greth_set_multicast_list;
+		greth_netdev_ops.ndo_set_rx_mode = greth_set_multicast_list;
 		dev->flags |= IFF_MULTICAST;
 	} else {
 		dev->flags &= ~IFF_MULTICAST;
diff --git a/drivers/net/greth.h b/drivers/net/ethernet/aeroflex/greth.h
index 9a0040dee4da..9a0040dee4da 100644
--- a/drivers/net/greth.h
+++ b/drivers/net/ethernet/aeroflex/greth.h
diff --git a/drivers/net/ethernet/alteon/Kconfig b/drivers/net/ethernet/alteon/Kconfig
new file mode 100644
index 000000000000..799a85282070
--- /dev/null
+++ b/drivers/net/ethernet/alteon/Kconfig
@@ -0,0 +1,48 @@
+#
+# Alteon network device configuration
+#
+
+config NET_VENDOR_ALTEON
+	bool "Alteon devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Alteon cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_ALTEON
+
+config ACENIC
+	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
+	depends on PCI
+	---help---
+	  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
+	  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
+	  adapter. The driver allows for using the Jumbo Frame option (9000
+	  bytes/frame) however it requires that your switches can handle this
+	  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
+	  line.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acenic.
+
+config ACENIC_OMIT_TIGON_I
+	bool "Omit support for old Tigon I based AceNICs"
+	depends on ACENIC
+	---help---
+	  Say Y here if you only have Tigon II based AceNICs and want to leave
+	  out support for the older Tigon I based cards which are no longer
+	  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
+	  version)).  This will reduce the size of the driver object by
+	  app. 100KB.  If you are not sure whether your card is a Tigon I or a
+	  Tigon II, say N here.
+
+	  The safe and default value for this is N.
+
+endif # NET_VENDOR_ALTEON
diff --git a/drivers/net/ethernet/alteon/Makefile b/drivers/net/ethernet/alteon/Makefile
new file mode 100644
index 000000000000..a2ca173f2a50
--- /dev/null
+++ b/drivers/net/ethernet/alteon/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Alteon network device drivers.
+#
+
+obj-$(CONFIG_ACENIC) += acenic.o
diff --git a/drivers/net/acenic.c b/drivers/net/ethernet/alteon/acenic.c
index 31798f5f5d06..1d6f2db794fd 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/ethernet/alteon/acenic.c
@@ -449,7 +449,7 @@ static const struct net_device_ops ace_netdev_ops = {
 	.ndo_tx_timeout		= ace_watchdog,
 	.ndo_get_stats		= ace_get_stats,
 	.ndo_start_xmit		= ace_start_xmit,
-	.ndo_set_multicast_list	= ace_set_multicast_list,
+	.ndo_set_rx_mode	= ace_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ace_set_mac_addr,
 	.ndo_change_mtu		= ace_change_mtu,
diff --git a/drivers/net/acenic.h b/drivers/net/ethernet/alteon/acenic.h
index 51c486cfbb8c..51c486cfbb8c 100644
--- a/drivers/net/acenic.h
+++ b/drivers/net/ethernet/alteon/acenic.h
diff --git a/drivers/net/7990.c b/drivers/net/ethernet/amd/7990.c
index 60b35fb5f524..60b35fb5f524 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/ethernet/amd/7990.c
diff --git a/drivers/net/7990.h b/drivers/net/ethernet/amd/7990.h
index 0a5837b96421..0a5837b96421 100644
--- a/drivers/net/7990.h
+++ b/drivers/net/ethernet/amd/7990.h
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
new file mode 100644
index 000000000000..8af1c934dbd5
--- /dev/null
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -0,0 +1,193 @@
+#
+# AMD network device configuration
+#
+
+config NET_VENDOR_AMD
+	bool "AMD devices"
+	default y
+	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
+		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
+		   (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
+	---help---
+	  If you have a network (Ethernet) chipset belonging to this class,
+	  say Y.
+
+	  Note that the answer to this question does not directly affect
+	  the kernel: saying N will just case the configurator to skip all
+	  the questions regarding AMD chipsets. If you say Y, you will be asked
+	  for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_AMD
+
+config A2065
+	tristate "A2065 support"
+	depends on ZORRO
+	select CRC32
+	---help---
+	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called a2065.
+
+config AMD8111_ETH
+	tristate "AMD 8111 (new PCI LANCE) support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  If you have an AMD 8111-based PCI LANCE ethernet card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called amd8111e.
+
+config LANCE
+	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
+	depends on ISA && ISA_DMA_API
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
+	  of this type.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called lance.  This is recommended.
+
+config PCNET32
+	tristate "AMD PCnet32 PCI support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called pcnet32.
+
+config ARIADNE
+	tristate "Ariadne support"
+	depends on ZORRO
+	---help---
+	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ariadne.
+
+config ARM_AM79C961A
+	bool "ARM EBSA110 AM79C961A support"
+	depends on ARM && ARCH_EBSA110
+	select CRC32
+	---help---
+	  If you wish to compile a kernel for the EBSA-110, then you should
+	  always answer Y to this.
+
+config ATARILANCE
+	tristate "Atari LANCE support"
+	depends on ATARI
+	---help---
+	  Say Y to include support for several Atari Ethernet adapters based
+	  on the AMD LANCE chipset: RieblCard (with or without battery), or
+	  PAMCard VME (also the version by Rhotron, with different addresses).
+
+config DECLANCE
+	tristate "DEC LANCE ethernet controller support"
+	depends on MACH_DECSTATION
+	select CRC32
+	---help---
+	  This driver is for the series of Ethernet controllers produced by
+	  DEC (now Compaq) based on the AMD LANCE chipset, including the
+	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
+
+config DEPCA
+	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
+	depends on (ISA || EISA || MCA)
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:drivers/net/depca.c>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called depca.
+
+config HPLANCE
+	bool "HP on-board LANCE support"
+	depends on DIO
+	select CRC32
+	---help---
+	  If you want to use the builtin "LANCE" Ethernet controller on an
+	  HP300 machine, say Y here.
+
+config MIPS_AU1X00_ENET
+	tristate "MIPS AU1000 Ethernet support"
+	depends on MIPS_ALCHEMY
+	select PHYLIB
+	select CRC32
+	---help---
+	  If you have an Alchemy Semi AU1X00 based system
+	  say Y.  Otherwise, say N.
+
+config MVME147_NET
+	tristate "MVME147 (LANCE) Ethernet support"
+	depends on MVME147
+	select CRC32
+	---help---
+	  Support for the on-board Ethernet interface on the Motorola MVME147
+	  single-board computer.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config PCMCIA_NMCLAN
+	tristate "New Media PCMCIA support"
+	depends on PCMCIA
+	help
+	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
+	  PCMCIA (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called nmclan_cs.  If unsure, say N.
+
+config NI65
+	tristate "NI6510 support"
+	depends on ISA && ISA_DMA_API
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni65.
+
+config SUN3LANCE
+	tristate "Sun3/Sun3x on-board LANCE support"
+	depends on (SUN3 || SUN3X)
+	---help---
+	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
+	  here to compile in the Linux driver for this and enable Ethernet.
+	  General Linux information on the Sun 3 and 3x series (now
+	  discontinued) is at
+	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+	  If you're not building a kernel for a Sun 3, say N.
+
+config SUNLANCE
+	tristate "Sun LANCE support"
+	depends on SBUS
+	select CRC32
+	---help---
+	  This driver supports the "le" interface present on all 32-bit Sparc
+	  systems, on some older Ultra systems and as an Sbus option.  These
+	  cards are based on the AMD LANCE chipset, which is better known
+	  via the NE2100 cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunlance.
+
+endif # NET_VENDOR_AMD
diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile
new file mode 100644
index 000000000000..175caa5328c9
--- /dev/null
+++ b/drivers/net/ethernet/amd/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the AMD network device drivers.
+#
+
+obj-$(CONFIG_A2065) += a2065.o
+obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
+obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
+obj-$(CONFIG_ARIADNE) += ariadne.o
+obj-$(CONFIG_ATARILANCE) += atarilance.o
+obj-$(CONFIG_DECLANCE) += declance.o
+obj-$(CONFIG_DEPCA) += depca.o
+obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
+obj-$(CONFIG_LANCE) += lance.o
+obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
+obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
+obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
+obj-$(CONFIG_NI65) += ni65.o
+obj-$(CONFIG_PCNET32) += pcnet32.o
+obj-$(CONFIG_SUN3LANCE) += sun3lance.o
+obj-$(CONFIG_SUNLANCE) += sunlance.o
diff --git a/drivers/net/a2065.c b/drivers/net/ethernet/amd/a2065.c
index e1e1b07d9b8d..825e5d4ef4c3 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/ethernet/amd/a2065.c
@@ -664,7 +664,7 @@ static const struct net_device_ops lance_netdev_ops = {
 	.ndo_stop		= lance_close,
 	.ndo_start_xmit		= lance_start_xmit,
 	.ndo_tx_timeout		= lance_tx_timeout,
-	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_set_rx_mode	= lance_set_multicast,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/a2065.h b/drivers/net/ethernet/amd/a2065.h
index 5117759d4e9c..5117759d4e9c 100644
--- a/drivers/net/a2065.h
+++ b/drivers/net/ethernet/amd/a2065.h
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
index 52fe21e1e2cd..c2b630c5e852 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/ethernet/amd/am79c961a.c
@@ -659,7 +659,7 @@ static const struct net_device_ops am79c961_netdev_ops = {
 	.ndo_open		= am79c961_open,
 	.ndo_stop		= am79c961_close,
 	.ndo_start_xmit		= am79c961_sendpacket,
-	.ndo_set_multicast_list	= am79c961_setmulticastlist,
+	.ndo_set_rx_mode	= am79c961_setmulticastlist,
 	.ndo_tx_timeout		= am79c961_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/ethernet/amd/am79c961a.h
index fd634d32756b..fd634d32756b 100644
--- a/drivers/net/arm/am79c961a.h
+++ b/drivers/net/ethernet/amd/am79c961a.h
diff --git a/drivers/net/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
index 78002ef9c0e5..a9745f4ddbfe 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/ethernet/amd/amd8111e.c
@@ -1798,7 +1798,7 @@ static const struct net_device_ops amd8111e_netdev_ops = {
 	.ndo_start_xmit		= amd8111e_start_xmit,
 	.ndo_tx_timeout		= amd8111e_tx_timeout,
 	.ndo_get_stats		= amd8111e_get_stats,
-	.ndo_set_multicast_list = amd8111e_set_multicast_list,
+	.ndo_set_rx_mode	= amd8111e_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= amd8111e_set_mac_address,
 	.ndo_do_ioctl		= amd8111e_ioctl,
diff --git a/drivers/net/amd8111e.h b/drivers/net/ethernet/amd/amd8111e.h
index 2ff2e7a12dd0..2ff2e7a12dd0 100644
--- a/drivers/net/amd8111e.h
+++ b/drivers/net/ethernet/amd/amd8111e.h
diff --git a/drivers/net/ariadne.c b/drivers/net/ethernet/amd/ariadne.c
index 7ed78f402042..eb18e1fe65c8 100644
--- a/drivers/net/ariadne.c
+++ b/drivers/net/ethernet/amd/ariadne.c
@@ -704,7 +704,7 @@ static const struct net_device_ops ariadne_netdev_ops = {
 	.ndo_start_xmit		= ariadne_start_xmit,
 	.ndo_tx_timeout		= ariadne_tx_timeout,
 	.ndo_get_stats		= ariadne_get_stats,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/ariadne.h b/drivers/net/ethernet/amd/ariadne.h
index 727be5cdd1ea..727be5cdd1ea 100644
--- a/drivers/net/ariadne.h
+++ b/drivers/net/ethernet/amd/ariadne.h
diff --git a/drivers/net/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
index 1264d781b554..15bfa28d6c53 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/ethernet/amd/atarilance.c
@@ -456,7 +456,7 @@ static const struct net_device_ops lance_netdev_ops = {
 	.ndo_open		= lance_open,
 	.ndo_stop		= lance_close,
 	.ndo_start_xmit		= lance_start_xmit,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_set_mac_address	= lance_set_mac_address,
 	.ndo_tx_timeout		= lance_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
index b9debcfb61a0..82386677bb8c 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/ethernet/amd/au1000_eth.c
@@ -1010,7 +1010,7 @@ static const struct net_device_ops au1000_netdev_ops = {
 	.ndo_open		= au1000_open,
 	.ndo_stop		= au1000_close,
 	.ndo_start_xmit		= au1000_tx,
-	.ndo_set_multicast_list	= au1000_multicast_list,
+	.ndo_set_rx_mode	= au1000_multicast_list,
 	.ndo_do_ioctl		= au1000_ioctl,
 	.ndo_tx_timeout		= au1000_tx_timeout,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/au1000_eth.h b/drivers/net/ethernet/amd/au1000_eth.h
index 6229c774552c..6229c774552c 100644
--- a/drivers/net/au1000_eth.h
+++ b/drivers/net/ethernet/amd/au1000_eth.h
diff --git a/drivers/net/declance.c b/drivers/net/ethernet/amd/declance.c
index d5598f6584a3..73f8d4fa682d 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -1015,7 +1015,7 @@ static const struct net_device_ops lance_netdev_ops = {
 	.ndo_stop		= lance_close,
 	.ndo_start_xmit		= lance_start_xmit,
 	.ndo_tx_timeout		= lance_tx_timeout,
-	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_set_rx_mode	= lance_set_multicast,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/depca.c b/drivers/net/ethernet/amd/depca.c
index f2015a851977..681970c07f22 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/ethernet/amd/depca.c
@@ -572,7 +572,7 @@ static const struct net_device_ops depca_netdev_ops = {
 	.ndo_open 		= depca_open,
 	.ndo_start_xmit 	= depca_start_xmit,
 	.ndo_stop 		= depca_close,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_do_ioctl 		= depca_ioctl,
 	.ndo_tx_timeout 	= depca_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/depca.h b/drivers/net/ethernet/amd/depca.h
index ee42648dbde6..ee42648dbde6 100644
--- a/drivers/net/depca.h
+++ b/drivers/net/ethernet/amd/depca.h
diff --git a/drivers/net/hplance.c b/drivers/net/ethernet/amd/hplance.c
index a900d5bf2948..86aa0d546a5b 100644
--- a/drivers/net/hplance.c
+++ b/drivers/net/ethernet/amd/hplance.c
@@ -74,7 +74,7 @@ static const struct net_device_ops hplance_netdev_ops = {
 	.ndo_open		= hplance_open,
 	.ndo_stop		= hplance_close,
 	.ndo_start_xmit		= lance_start_xmit,
-	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_set_rx_mode	= lance_set_multicast,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/hplance.h b/drivers/net/ethernet/amd/hplance.h
index 04aee9e0376a..04aee9e0376a 100644
--- a/drivers/net/hplance.h
+++ b/drivers/net/ethernet/amd/hplance.h
diff --git a/drivers/net/lance.c b/drivers/net/ethernet/amd/lance.c
index 02336edce748..a6e2e840884e 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/ethernet/amd/lance.c
@@ -459,7 +459,7 @@ static const struct net_device_ops lance_netdev_ops = {
 	.ndo_start_xmit		= lance_start_xmit,
 	.ndo_stop		= lance_close,
 	.ndo_get_stats		= lance_get_stats,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_tx_timeout		= lance_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/mvme147.c b/drivers/net/ethernet/amd/mvme147.c
index 3a7ad840d5b5..56bc47a94186 100644
--- a/drivers/net/mvme147.c
+++ b/drivers/net/ethernet/amd/mvme147.c
@@ -61,7 +61,7 @@ static const struct net_device_ops lance_netdev_ops = {
 	.ndo_open		= m147lance_open,
 	.ndo_stop		= m147lance_close,
 	.ndo_start_xmit		= lance_start_xmit,
-	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_set_rx_mode	= lance_set_multicast,
 	.ndo_tx_timeout		= lance_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ni65.c b/drivers/net/ethernet/amd/ni65.c
index c75ae85eb918..6e6aa7213aab 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ethernet/amd/ni65.c
@@ -406,7 +406,7 @@ static const struct net_device_ops ni65_netdev_ops = {
 	.ndo_stop		= ni65_close,
 	.ndo_start_xmit		= ni65_send_packet,
 	.ndo_tx_timeout		= ni65_timeout,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ni65.h b/drivers/net/ethernet/amd/ni65.h
index e6217e35edf0..e6217e35edf0 100644
--- a/drivers/net/ni65.h
+++ b/drivers/net/ethernet/amd/ni65.h
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c
index 9d70b6595220..3accd5d21b08 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/ethernet/amd/nmclan_cs.c
@@ -430,7 +430,7 @@ static const struct net_device_ops mace_netdev_ops = {
 	.ndo_tx_timeout		= mace_tx_timeout,
 	.ndo_set_config		= mace_config,
 	.ndo_get_stats		= mace_get_stats,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 8b3090dc4bcd..c90fe917090b 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -82,7 +82,7 @@ static int cards_found;
 /*
  * VLB I/O addresses
  */
-static unsigned int pcnet32_portlist[] __initdata =
+static unsigned int pcnet32_portlist[] =
     { 0x300, 0x320, 0x340, 0x360, 0 };
 
 static int pcnet32_debug;
@@ -1505,7 +1505,7 @@ static const struct net_device_ops pcnet32_netdev_ops = {
 	.ndo_start_xmit		= pcnet32_start_xmit,
 	.ndo_tx_timeout		= pcnet32_tx_timeout,
 	.ndo_get_stats		= pcnet32_get_stats,
-	.ndo_set_multicast_list = pcnet32_set_multicast_list,
+	.ndo_set_rx_mode	= pcnet32_set_multicast_list,
 	.ndo_do_ioctl		= pcnet32_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/sun3lance.c b/drivers/net/ethernet/amd/sun3lance.c
index 7d9ec23aabf6..080b71fcc683 100644
--- a/drivers/net/sun3lance.c
+++ b/drivers/net/ethernet/amd/sun3lance.c
@@ -297,7 +297,7 @@ static const struct net_device_ops lance_netdev_ops = {
 	.ndo_open		= lance_open,
 	.ndo_stop		= lance_close,
 	.ndo_start_xmit		= lance_start_xmit,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_set_mac_address	= NULL,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
index 06f2d4382dc4..8fda457f94cf 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/ethernet/amd/sunlance.c
@@ -1298,7 +1298,7 @@ static const struct net_device_ops sparc_lance_ops = {
 	.ndo_open		= lance_open,
 	.ndo_stop		= lance_close,
 	.ndo_start_xmit		= lance_start_xmit,
-	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_set_rx_mode	= lance_set_multicast,
 	.ndo_tx_timeout		= lance_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig
new file mode 100644
index 000000000000..59d5c2630acb
--- /dev/null
+++ b/drivers/net/ethernet/apple/Kconfig
@@ -0,0 +1,97 @@
+#
+# Apple device configuration
+#
+
+config NET_VENDOR_APPLE
+	bool "Apple devices"
+	default y
+	depends on (PPC_PMAC && PPC32) || MAC || ISA || EISA || MACH_IXDP2351 \
+		   || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about IBM devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_APPLE
+
+config MACE
+	tristate "MACE (Power Mac ethernet) support"
+	depends on PPC_PMAC && PPC32
+	select CRC32
+	---help---
+	  Power Macintoshes and clones with Ethernet built-in on the
+	  motherboard will usually use a MACE (Medium Access Control for
+	  Ethernet) interface. Say Y to include support for the MACE chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mace.
+
+config MACE_AAUI_PORT
+	bool "Use AAUI port instead of TP by default"
+	depends on MACE
+	---help---
+	  Some Apple machines (notably the Apple Network Server) which use the
+	  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
+	  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
+	  Y here if you have such a machine.  If unsure, say N.
+	  The driver will default to AAUI on ANS anyway, and if you use it as
+	  a module, you can provide the port_aaui=0|1 to force the driver.
+
+config BMAC
+	tristate "BMAC (G3 ethernet) support"
+	depends on PPC_PMAC && PPC32
+	select CRC32
+	---help---
+	  Say Y for support of BMAC Ethernet interfaces. These are used on G3
+	  computers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bmac.
+
+config MAC89x0
+	tristate "Macintosh CS89x0 based ethernet cards"
+	depends on MAC
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards.  If you have a
+	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. This module will
+	  be called mac89x0.
+
+config MACMACE
+	bool "Macintosh (AV) onboard MACE ethernet"
+	depends on MAC
+	select CRC32
+	---help---
+	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
+	  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
+	  say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config CS89x0
+	tristate "CS89x0 support"
+	depends on (ISA || EISA || MACH_IXDP2351 \
+		|| ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards. If you have a
+	  network (Ethernet) card of this type, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:Documentation/networking/cs89x0.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called cs89x0.
+
+config CS89x0_NONISA_IRQ
+	def_bool y
+	depends on CS89x0 != n
+	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+
+endif # NET_VENDOR_APPLE
diff --git a/drivers/net/ethernet/apple/Makefile b/drivers/net/ethernet/apple/Makefile
new file mode 100644
index 000000000000..9d300864461f
--- /dev/null
+++ b/drivers/net/ethernet/apple/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Apple network device drivers.
+#
+
+obj-$(CONFIG_MACE) += mace.o
+obj-$(CONFIG_BMAC) += bmac.o
+obj-$(CONFIG_MAC89x0) += mac89x0.o
+obj-$(CONFIG_CS89x0) += cs89x0.o
+obj-$(CONFIG_MACMACE) += macmace.o
diff --git a/drivers/net/bmac.c b/drivers/net/ethernet/apple/bmac.c
index 45e45e8d3d66..d070b229dbf7 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -1237,7 +1237,7 @@ static const struct net_device_ops bmac_netdev_ops = {
 	.ndo_open		= bmac_open,
 	.ndo_stop		= bmac_close,
 	.ndo_start_xmit		= bmac_output,
-	.ndo_set_multicast_list	= bmac_set_multicast,
+	.ndo_set_rx_mode	= bmac_set_multicast,
 	.ndo_set_mac_address	= bmac_set_address,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/bmac.h b/drivers/net/ethernet/apple/bmac.h
index a1d19d867ba5..a1d19d867ba5 100644
--- a/drivers/net/bmac.h
+++ b/drivers/net/ethernet/apple/bmac.h
diff --git a/drivers/net/cs89x0.c b/drivers/net/ethernet/apple/cs89x0.c
index 537a4b2e2020..f328da24c8fa 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/ethernet/apple/cs89x0.c
@@ -488,7 +488,7 @@ static const struct net_device_ops net_ops = {
 	.ndo_tx_timeout		= net_timeout,
 	.ndo_start_xmit 	= net_send_packet,
 	.ndo_get_stats		= net_get_stats,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_set_mac_address 	= set_mac_address,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= net_poll_controller,
diff --git a/drivers/net/cs89x0.h b/drivers/net/ethernet/apple/cs89x0.h
index 91423b70bb45..91423b70bb45 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/ethernet/apple/cs89x0.h
diff --git a/drivers/net/mac89x0.c b/drivers/net/ethernet/apple/mac89x0.c
index 669b317974a8..83781f316d1f 100644
--- a/drivers/net/mac89x0.c
+++ b/drivers/net/ethernet/apple/mac89x0.c
@@ -170,7 +170,7 @@ static const struct net_device_ops mac89x0_netdev_ops = {
 	.ndo_stop		= net_close,
 	.ndo_start_xmit		= net_send_packet,
 	.ndo_get_stats		= net_get_stats,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_set_mac_address	= set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/mace.c b/drivers/net/ethernet/apple/mace.c
index 2074e9724ba3..bec87bd9195c 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/ethernet/apple/mace.c
@@ -100,7 +100,7 @@ static const struct net_device_ops mace_netdev_ops = {
 	.ndo_open		= mace_open,
 	.ndo_stop		= mace_close,
 	.ndo_start_xmit		= mace_xmit_start,
-	.ndo_set_multicast_list	= mace_set_multicast,
+	.ndo_set_rx_mode	= mace_set_multicast,
 	.ndo_set_mac_address	= mace_set_address,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/mace.h b/drivers/net/ethernet/apple/mace.h
index 30b7ec0cedb5..30b7ec0cedb5 100644
--- a/drivers/net/mace.h
+++ b/drivers/net/ethernet/apple/mace.h
diff --git a/drivers/net/macmace.c b/drivers/net/ethernet/apple/macmace.c
index 4286e67f9634..6cd3f8646dcd 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/ethernet/apple/macmace.c
@@ -185,7 +185,7 @@ static const struct net_device_ops mace_netdev_ops = {
 	.ndo_stop		= mace_close,
 	.ndo_start_xmit		= mace_xmit_start,
 	.ndo_tx_timeout		= mace_tx_timeout,
-	.ndo_set_multicast_list	= mace_set_multicast,
+	.ndo_set_rx_mode	= mace_set_multicast,
 	.ndo_set_mac_address	= mace_set_address,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
new file mode 100644
index 000000000000..26ab8cae28b5
--- /dev/null
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -0,0 +1,66 @@
+#
+# Atheros device configuration
+#
+
+config NET_VENDOR_ATHEROS
+	bool "Atheros devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Atheros devices. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_ATHEROS
+
+config ATL2
+	tristate "Atheros L2 Fast Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the Atheros L2 fast ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl2.
+
+config ATL1
+	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the Atheros/Attansic L1 gigabit ethernet
+	  adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1.
+
+config ATL1E
+	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the Atheros L1E gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1e.
+
+config ATL1C
+	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the Atheros L1C gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1c.
+
+endif # NET_VENDOR_ATHEROS
diff --git a/drivers/net/ethernet/atheros/Makefile b/drivers/net/ethernet/atheros/Makefile
new file mode 100644
index 000000000000..e7e76fb576ff
--- /dev/null
+++ b/drivers/net/ethernet/atheros/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Atheros network device drivers.
+#
+
+obj-$(CONFIG_ATL1) += atlx/
+obj-$(CONFIG_ATL2) += atlx/
+obj-$(CONFIG_ATL1E) += atl1e/
+obj-$(CONFIG_ATL1C) += atl1c/
diff --git a/drivers/net/atl1c/Makefile b/drivers/net/ethernet/atheros/atl1c/Makefile
index c37d966952ee..c37d966952ee 100644
--- a/drivers/net/atl1c/Makefile
+++ b/drivers/net/ethernet/atheros/atl1c/Makefile
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h
index ca70e16b6e2c..ca70e16b6e2c 100644
--- a/drivers/net/atl1c/atl1c.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
index 7be884d0aaf6..7be884d0aaf6 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
index 23f2ab0f2fa8..23f2ab0f2fa8 100644
--- a/drivers/net/atl1c/atl1c_hw.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index 655fc6c4a8a4..655fc6c4a8a4 100644
--- a/drivers/net/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 972244218408..acb4c1098cae 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -2600,7 +2600,7 @@ static const struct net_device_ops atl1c_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_start_xmit		= atl1c_xmit_frame,
 	.ndo_set_mac_address	= atl1c_set_mac_addr,
-	.ndo_set_multicast_list = atl1c_set_multi,
+	.ndo_set_rx_mode	= atl1c_set_multi,
 	.ndo_change_mtu		= atl1c_change_mtu,
 	.ndo_fix_features	= atl1c_fix_features,
 	.ndo_set_features	= atl1c_set_features,
diff --git a/drivers/net/atl1e/Makefile b/drivers/net/ethernet/atheros/atl1e/Makefile
index bc11be824e76..bc11be824e76 100644
--- a/drivers/net/atl1e/Makefile
+++ b/drivers/net/ethernet/atheros/atl1e/Makefile
diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h
index 829b5ad71d0d..829b5ad71d0d 100644
--- a/drivers/net/atl1e/atl1e.h
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
index 6269438d365f..6269438d365f 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
index 923063d2e5bb..923063d2e5bb 100644
--- a/drivers/net/atl1e/atl1e_hw.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
diff --git a/drivers/net/atl1e/atl1e_hw.h b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.h
index 74df16aef793..74df16aef793 100644
--- a/drivers/net/atl1e/atl1e_hw.h
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.h
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index d8d411998fa3..1b5dc799348d 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -2212,7 +2212,7 @@ static const struct net_device_ops atl1e_netdev_ops = {
 	.ndo_stop		= atl1e_close,
 	.ndo_start_xmit		= atl1e_xmit_frame,
 	.ndo_get_stats		= atl1e_get_stats,
-	.ndo_set_multicast_list	= atl1e_set_multi,
+	.ndo_set_rx_mode	= atl1e_set_multi,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= atl1e_set_mac_addr,
 	.ndo_fix_features	= atl1e_fix_features,
diff --git a/drivers/net/atl1e/atl1e_param.c b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c
index 0ce60b6e7ef0..0ce60b6e7ef0 100644
--- a/drivers/net/atl1e/atl1e_param.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c
diff --git a/drivers/net/atlx/Makefile b/drivers/net/ethernet/atheros/atlx/Makefile
index e4f6022ca552..e4f6022ca552 100644
--- a/drivers/net/atlx/Makefile
+++ b/drivers/net/ethernet/atheros/atlx/Makefile
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index 97e6954304ea..c34e82391f75 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -2869,7 +2869,7 @@ static const struct net_device_ops atl1_netdev_ops = {
 	.ndo_open		= atl1_open,
 	.ndo_stop		= atl1_close,
 	.ndo_start_xmit		= atl1_xmit_frame,
-	.ndo_set_multicast_list	= atlx_set_multi,
+	.ndo_set_rx_mode	= atlx_set_multi,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= atl1_set_mac,
 	.ndo_change_mtu		= atl1_change_mtu,
diff --git a/drivers/net/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h
index 109d6da8be97..109d6da8be97 100644
--- a/drivers/net/atlx/atl1.h
+++ b/drivers/net/ethernet/atheros/atlx/atl1.h
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index d4f7dda39721..1feae5928a4b 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -1325,7 +1325,7 @@ static const struct net_device_ops atl2_netdev_ops = {
 	.ndo_open		= atl2_open,
 	.ndo_stop		= atl2_close,
 	.ndo_start_xmit		= atl2_xmit_frame,
-	.ndo_set_multicast_list	= atl2_set_multi,
+	.ndo_set_rx_mode	= atl2_set_multi,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= atl2_set_mac,
 	.ndo_change_mtu		= atl2_change_mtu,
diff --git a/drivers/net/atlx/atl2.h b/drivers/net/ethernet/atheros/atlx/atl2.h
index bf9016ebdd9b..bf9016ebdd9b 100644
--- a/drivers/net/atlx/atl2.h
+++ b/drivers/net/ethernet/atheros/atlx/atl2.h
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/ethernet/atheros/atlx/atlx.c
index aabcf4b5745a..aabcf4b5745a 100644
--- a/drivers/net/atlx/atlx.c
+++ b/drivers/net/ethernet/atheros/atlx/atlx.c
diff --git a/drivers/net/atlx/atlx.h b/drivers/net/ethernet/atheros/atlx/atlx.h
index 14054b75aa62..14054b75aa62 100644
--- a/drivers/net/atlx/atlx.h
+++ b/drivers/net/ethernet/atheros/atlx/atlx.h
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
new file mode 100644
index 000000000000..d82ad221ebd4
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -0,0 +1,120 @@
+#
+# Broadcom device configuration
+#
+
+config NET_VENDOR_BROADCOM
+	bool "Broadcom devices"
+	default y
+	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
+		   SIBYTE_SB1xxx_SOC
+	---help---
+	  If you have a network (Ethernet) chipset belonging to this class,
+	  say Y.
+
+	  Note that the answer to this question does not directly affect
+	  the kernel: saying N will just case the configurator to skip all
+	  the questions regarding AMD chipsets. If you say Y, you will be asked
+	  for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_BROADCOM
+
+config B44
+	tristate "Broadcom 440x/47xx ethernet support"
+	depends on SSB_POSSIBLE && HAS_DMA
+	select SSB
+	select MII
+	---help---
+	  If you have a network (Ethernet) controller of this type, say Y
+	  or M and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called b44.
+
+# Auto-select SSB PCI-HOST support, if possible
+config B44_PCI_AUTOSELECT
+	bool
+	depends on B44 && SSB_PCIHOST_POSSIBLE
+	select SSB_PCIHOST
+	default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B44_PCICORE_AUTOSELECT
+	bool
+	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
+	select SSB_DRIVER_PCICORE
+	default y
+
+config B44_PCI
+	bool
+	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
+	default y
+
+config BCM63XX_ENET
+	tristate "Broadcom 63xx internal mac support"
+	depends on BCM63XX
+	select MII
+	select PHYLIB
+	help
+	  This driver supports the ethernet MACs in the Broadcom 63xx
+	  MIPS chipset family (BCM63XX).
+
+config BNX2
+	tristate "Broadcom NetXtremeII support"
+	depends on PCI
+	select CRC32
+	select FW_LOADER
+	---help---
+	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2.  This is recommended.
+
+config CNIC
+	tristate "Broadcom CNIC support"
+	depends on PCI
+	select BNX2
+	select UIO
+	---help---
+	  This driver supports offload features of Broadcom NetXtremeII
+	  gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cnic.  This is recommended.
+
+config SB1250_MAC
+	tristate "SB1250 Gigabit Ethernet support"
+	depends on SIBYTE_SB1xxx_SOC
+	select PHYLIB
+	---help---
+	  This driver supports Gigabit Ethernet interfaces based on the
+	  Broadcom SiByte family of System-On-a-Chip parts.  They include
+	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
+	  and BCM1480 chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sb1250-mac.
+
+config TIGON3
+	tristate "Broadcom Tigon3 support"
+	depends on PCI
+	select PHYLIB
+	---help---
+	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tg3.  This is recommended.
+
+config BNX2X
+	tristate "Broadcom NetXtremeII 10Gb support"
+	depends on PCI
+	select FW_LOADER
+	select ZLIB_INFLATE
+	select LIBCRC32C
+	select MDIO
+	---help---
+	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2x.  This is recommended.
+
+endif # NET_VENDOR_BROADCOM
diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile
new file mode 100644
index 000000000000..b7896051d54e
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Broadcom network device drivers.
+#
+
+obj-$(CONFIG_B44) += b44.o
+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+obj-$(CONFIG_BNX2) += bnx2.o
+obj-$(CONFIG_CNIC) += cnic.o
+obj-$(CONFIG_BNX2X) += bnx2x/
+obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
+obj-$(CONFIG_TIGON3) += tg3.o
diff --git a/drivers/net/b44.c b/drivers/net/ethernet/broadcom/b44.c
index 41ea84e3f69c..4cf835dbc122 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -2114,7 +2114,7 @@ static const struct net_device_ops b44_netdev_ops = {
 	.ndo_stop		= b44_close,
 	.ndo_start_xmit		= b44_start_xmit,
 	.ndo_get_stats		= b44_get_stats,
-	.ndo_set_multicast_list = b44_set_rx_mode,
+	.ndo_set_rx_mode	= b44_set_rx_mode,
 	.ndo_set_mac_address	= b44_set_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= b44_ioctl,
diff --git a/drivers/net/b44.h b/drivers/net/ethernet/broadcom/b44.h
index e1905a49279f..e1905a49279f 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 1d9b9858067c..05b022866076 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1603,7 +1603,7 @@ static const struct net_device_ops bcm_enet_ops = {
 	.ndo_stop		= bcm_enet_stop,
 	.ndo_start_xmit		= bcm_enet_start_xmit,
 	.ndo_set_mac_address	= bcm_enet_set_mac_address,
-	.ndo_set_multicast_list = bcm_enet_set_multicast_list,
+	.ndo_set_rx_mode	= bcm_enet_set_multicast_list,
 	.ndo_do_ioctl		= bcm_enet_ioctl,
 	.ndo_change_mtu		= bcm_enet_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/bcm63xx_enet.h b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
index 0e3048b788c2..0e3048b788c2 100644
--- a/drivers/net/bcm63xx_enet.h
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
diff --git a/drivers/net/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 4b2b57018a02..9afb6534cabe 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -36,6 +36,7 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
+#include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <net/ip.h>
 #include <net/tcp.h>
@@ -2929,8 +2930,8 @@ bnx2_reuse_rx_skb_pages(struct bnx2 *bp, struct bnx2_rx_ring_info *rxr,
 
 		shinfo = skb_shinfo(skb);
 		shinfo->nr_frags--;
-		page = shinfo->frags[shinfo->nr_frags].page;
-		shinfo->frags[shinfo->nr_frags].page = NULL;
+		page = skb_frag_page(&shinfo->frags[shinfo->nr_frags]);
+		__skb_frag_set_page(&shinfo->frags[shinfo->nr_frags], NULL);
 
 		cons_rx_pg->page = page;
 		dev_kfree_skb(skb);
@@ -6510,8 +6511,8 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		txbd = &txr->tx_desc_ring[ring_prod];
 
 		len = frag->size;
-		mapping = dma_map_page(&bp->pdev->dev, frag->page, frag->page_offset,
-				       len, PCI_DMA_TODEVICE);
+		mapping = skb_frag_dma_map(&bp->pdev->dev, frag, 0, len,
+					   PCI_DMA_TODEVICE);
 		if (dma_mapping_error(&bp->pdev->dev, mapping))
 			goto dma_error;
 		dma_unmap_addr_set(&txr->tx_buf_ring[ring_prod], mapping,
@@ -8370,6 +8371,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->vlan_features = dev->hw_features;
 	dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 	dev->features |= dev->hw_features;
+	dev->priv_flags |= IFF_UNICAST_FLT;
 
 	if ((rc = register_netdev(dev))) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
diff --git a/drivers/net/bnx2.h b/drivers/net/ethernet/broadcom/bnx2.h
index fc50d4267df8..fc50d4267df8 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/ethernet/broadcom/bnx2.h
diff --git a/drivers/net/bnx2_fw.h b/drivers/net/ethernet/broadcom/bnx2_fw.h
index 940eb91f209d..940eb91f209d 100644
--- a/drivers/net/bnx2_fw.h
+++ b/drivers/net/ethernet/broadcom/bnx2_fw.h
diff --git a/drivers/net/bnx2x/Makefile b/drivers/net/ethernet/broadcom/bnx2x/Makefile
index 48fbdd48f88f..48fbdd48f88f 100644
--- a/drivers/net/bnx2x/Makefile
+++ b/drivers/net/ethernet/broadcom/bnx2x/Makefile
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index c423504a755f..f127768e4e83 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -66,73 +66,68 @@
 #define BNX2X_MSG_SP			0x100000 /* was: NETIF_MSG_INTR */
 #define BNX2X_MSG_FP			0x200000 /* was: NETIF_MSG_INTR */
 
-#define DP_LEVEL			KERN_NOTICE	/* was: KERN_DEBUG */
-
 /* regular debug print */
-#define DP(__mask, __fmt, __args...)				\
+#define DP(__mask, fmt, ...)					\
 do {								\
 	if (bp->msg_enable & (__mask))				\
-		printk(DP_LEVEL "[%s:%d(%s)]" __fmt,		\
-		       __func__, __LINE__,			\
-		       bp->dev ? (bp->dev->name) : "?",		\
-		       ##__args);				\
+		pr_notice("[%s:%d(%s)]" fmt,			\
+			  __func__, __LINE__,			\
+			  bp->dev ? (bp->dev->name) : "?",	\
+			  ##__VA_ARGS__);			\
 } while (0)
 
-#define DP_CONT(__mask, __fmt, __args...)			\
+#define DP_CONT(__mask, fmt, ...)				\
 do {								\
 	if (bp->msg_enable & (__mask))				\
-		pr_cont(__fmt, ##__args);			\
+		pr_cont(fmt, ##__VA_ARGS__);			\
 } while (0)
 
 /* errors debug print */
-#define BNX2X_DBG_ERR(__fmt, __args...)				\
+#define BNX2X_DBG_ERR(fmt, ...)					\
 do {								\
 	if (netif_msg_probe(bp))				\
-		pr_err("[%s:%d(%s)]" __fmt,			\
+		pr_err("[%s:%d(%s)]" fmt,			\
 		       __func__, __LINE__,			\
 		       bp->dev ? (bp->dev->name) : "?",		\
-		       ##__args);				\
+		       ##__VA_ARGS__);				\
 } while (0)
 
 /* for errors (never masked) */
-#define BNX2X_ERR(__fmt, __args...)				\
+#define BNX2X_ERR(fmt, ...)					\
 do {								\
-	pr_err("[%s:%d(%s)]" __fmt,				\
+	pr_err("[%s:%d(%s)]" fmt,				\
 	       __func__, __LINE__,				\
 	       bp->dev ? (bp->dev->name) : "?",			\
-	       ##__args);					\
-	} while (0)
+	       ##__VA_ARGS__);					\
+} while (0)
 
-#define BNX2X_ERROR(__fmt, __args...) do { \
-	pr_err("[%s:%d]" __fmt, __func__, __LINE__, ##__args); \
-	} while (0)
+#define BNX2X_ERROR(fmt, ...)					\
+	pr_err("[%s:%d]" fmt, __func__, __LINE__, ##__VA_ARGS__)
 
 
 /* before we have a dev->name use dev_info() */
-#define BNX2X_DEV_INFO(__fmt, __args...)			 \
+#define BNX2X_DEV_INFO(fmt, ...)				 \
 do {								 \
 	if (netif_msg_probe(bp))				 \
-		dev_info(&bp->pdev->dev, __fmt, ##__args);	 \
+		dev_info(&bp->pdev->dev, fmt, ##__VA_ARGS__);	 \
 } while (0)
 
-#define BNX2X_MAC_FMT		"%pM"
-#define BNX2X_MAC_PRN_LIST(mac)	(mac)
-
-
 #ifdef BNX2X_STOP_ON_ERROR
 void bnx2x_int_disable(struct bnx2x *bp);
-#define bnx2x_panic() do { \
-		bp->panic = 1; \
-		BNX2X_ERR("driver assert\n"); \
-		bnx2x_int_disable(bp); \
-		bnx2x_panic_dump(bp); \
-	} while (0)
+#define bnx2x_panic()				\
+do {						\
+	bp->panic = 1;				\
+	BNX2X_ERR("driver assert\n");		\
+	bnx2x_int_disable(bp);			\
+	bnx2x_panic_dump(bp);			\
+} while (0)
 #else
-#define bnx2x_panic() do { \
-		bp->panic = 1; \
-		BNX2X_ERR("driver assert\n"); \
-		bnx2x_panic_dump(bp); \
-	} while (0)
+#define bnx2x_panic()				\
+do {						\
+	bp->panic = 1;				\
+	BNX2X_ERR("driver assert\n");		\
+	bnx2x_panic_dump(bp);			\
+} while (0)
 #endif
 
 #define bnx2x_mc_addr(ha)      ((ha)->addr)
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 5b0dba6d4efa..5c3eb17c4f4a 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -15,6 +15,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/etherdevice.h>
 #include <linux/if_vlan.h>
 #include <linux/interrupt.h>
@@ -63,8 +65,9 @@ static inline void bnx2x_bz_fp(struct bnx2x *bp, int index)
 	fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0);
 
 #ifdef BCM_CNIC
-	/* We don't want TPA on FCoE, FWD and OOO L2 rings */
-	bnx2x_fcoe(bp, disable_tpa) = 1;
+	/* We don't want TPA on an FCoE L2 ring */
+	if (IS_FCOE_FP(fp))
+		fp->disable_tpa = 1;
 #endif
 }
 
@@ -953,15 +956,16 @@ void __bnx2x_link_report(struct bnx2x *bp)
 		netdev_err(bp->dev, "NIC Link is Down\n");
 		return;
 	} else {
+		const char *duplex;
+		const char *flow;
+
 		netif_carrier_on(bp->dev);
-		netdev_info(bp->dev, "NIC Link is Up, ");
-		pr_cont("%d Mbps ", cur_data.line_speed);
 
 		if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
 				       &cur_data.link_report_flags))
-			pr_cont("full duplex");
+			duplex = "full";
 		else
-			pr_cont("half duplex");
+			duplex = "half";
 
 		/* Handle the FC at the end so that only these flags would be
 		 * possibly set. This way we may easily check if there is no FC
@@ -970,16 +974,19 @@ void __bnx2x_link_report(struct bnx2x *bp)
 		if (cur_data.link_report_flags) {
 			if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
 				     &cur_data.link_report_flags)) {
-				pr_cont(", receive ");
 				if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
 				     &cur_data.link_report_flags))
-					pr_cont("& transmit ");
+					flow = "ON - receive & transmit";
+				else
+					flow = "ON - receive";
 			} else {
-				pr_cont(", transmit ");
+				flow = "ON - transmit";
 			}
-			pr_cont("flow control ON");
+		} else {
+			flow = "none";
 		}
-		pr_cont("\n");
+		netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
+			    cur_data.line_speed, duplex, flow);
 	}
 }
 
@@ -1404,10 +1411,9 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
 u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
 	struct bnx2x *bp = netdev_priv(dev);
+
 #ifdef BCM_CNIC
-	if (NO_FCOE(bp))
-		return skb_tx_hash(dev, skb);
-	else {
+	if (!NO_FCOE(bp)) {
 		struct ethhdr *hdr = (struct ethhdr *)skb->data;
 		u16 ether_type = ntohs(hdr->h_proto);
 
@@ -1424,8 +1430,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
 			return bnx2x_fcoe_tx(bp, txq_index);
 	}
 #endif
-	/* Select a none-FCoE queue:  if FCoE is enabled, exclude FCoE L2 ring
-	 */
+	/* select a non-FCoE queue */
 	return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp));
 }
 
@@ -1448,6 +1453,28 @@ void bnx2x_set_num_queues(struct bnx2x *bp)
 	bp->num_queues += NON_ETH_CONTEXT_USE;
 }
 
+/**
+ * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues
+ *
+ * @bp:		Driver handle
+ *
+ * We currently support for at most 16 Tx queues for each CoS thus we will
+ * allocate a multiple of 16 for ETH L2 rings according to the value of the
+ * bp->max_cos.
+ *
+ * If there is an FCoE L2 queue the appropriate Tx queue will have the next
+ * index after all ETH L2 indices.
+ *
+ * If the actual number of Tx queues (for each CoS) is less than 16 then there
+ * will be the holes at the end of each group of 16 ETh L2 indices (0..15,
+ * 16..31,...) with indicies that are not coupled with any real Tx queue.
+ *
+ * The proper configuration of skb->queue_mapping is handled by
+ * bnx2x_select_queue() and __skb_tx_hash().
+ *
+ * bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash()
+ * will return a proper Tx index if TC is enabled (netdev->num_tc > 0).
+ */
 static inline int bnx2x_set_real_num_queues(struct bnx2x *bp)
 {
 	int rc, tx, rx;
@@ -1989,14 +2016,20 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 		return -EINVAL;
 	}
 
+	/*
+	 * It's important to set the bp->state to the value different from
+	 * BNX2X_STATE_OPEN and only then stop the Tx. Otherwise bnx2x_tx_int()
+	 * may restart the Tx from the NAPI context (see bnx2x_tx_int()).
+	 */
+	bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
+	smp_mb();
+
 	/* Stop Tx */
 	bnx2x_tx_disable(bp);
 
 #ifdef BCM_CNIC
 	bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
 #endif
-	bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
-	smp_mb();
 
 	bp->rx_mode = BNX2X_RX_MODE_NONE;
 
@@ -2578,7 +2611,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	/* enable this debug print to view the transmission queue being used
-	DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d",
+	DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d\n",
 	   txq_index, fp_index, txdata_index); */
 
 	/* locate the fastpath and the txdata */
@@ -2587,7 +2620,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* enable this debug print to view the tranmission details
 	DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d"
-			" tx_data ptr %p fp pointer %p",
+			" tx_data ptr %p fp pointer %p\n",
 	   txdata->cid, fp_index, txdata_index, txdata, fp); */
 
 	if (unlikely(bnx2x_tx_avail(bp, txdata) <
@@ -2767,9 +2800,8 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
-		mapping = dma_map_page(&bp->pdev->dev, frag->page,
-				       frag->page_offset, frag->size,
-				       DMA_TO_DEVICE);
+		mapping = skb_frag_dma_map(&bp->pdev->dev, frag, 0, frag->size,
+					   DMA_TO_DEVICE);
 		if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 
 			DP(NETIF_MSG_TX_QUEUED, "Unable to map page - "
@@ -2904,14 +2936,14 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 	/* requested to support too many traffic classes */
 	if (num_tc > bp->max_cos) {
 		DP(NETIF_MSG_TX_ERR, "support for too many traffic classes"
-				     " requested: %d. max supported is %d",
+				     " requested: %d. max supported is %d\n",
 				     num_tc, bp->max_cos);
 		return -EINVAL;
 	}
 
 	/* declare amount of supported traffic classes */
 	if (netdev_set_num_tc(dev, num_tc)) {
-		DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes",
+		DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes\n",
 				     num_tc);
 		return -EINVAL;
 	}
@@ -2919,7 +2951,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 	/* configure priority to traffic class mapping */
 	for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
 		netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
-		DP(BNX2X_MSG_SP, "mapping priority %d to tc %d",
+		DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n",
 		   prio, bp->prio_to_cos[prio]);
 	}
 
@@ -2928,10 +2960,10 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 	   This can be used for ets or pfc, and save the effort of setting
 	   up a multio class queue disc or negotiating DCBX with a switch
 	netdev_set_prio_tc_map(dev, 0, 0);
-	DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", 0, 0);
+	DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", 0, 0);
 	for (prio = 1; prio < 16; prio++) {
 		netdev_set_prio_tc_map(dev, prio, 1);
-		DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", prio, 1);
+		DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, 1);
 	} */
 
 	/* configure traffic class to transmission queue mapping */
@@ -2939,7 +2971,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 		count = BNX2X_NUM_ETH_QUEUES(bp);
 		offset = cos * MAX_TXQS_PER_COS;
 		netdev_set_tc_queue(dev, cos, count, offset);
-		DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d",
+		DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d\n",
 		   cos, offset, count);
 	}
 
@@ -3027,7 +3059,7 @@ static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
 			struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
 
 			DP(BNX2X_MSG_SP,
-			   "freeing tx memory of fp %d cos %d cid %d",
+			   "freeing tx memory of fp %d cos %d cid %d\n",
 			   fp_index, cos, txdata->cid);
 
 			BNX2X_FREE(txdata->tx_buf_ring);
@@ -3109,7 +3141,7 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
 			struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
 
 			DP(BNX2X_MSG_SP, "allocating tx memory of "
-					 "fp %d cos %d",
+					 "fp %d cos %d\n",
 			   index, cos);
 
 			BNX2X_ALLOC(txdata->tx_buf_ring,
@@ -3359,7 +3391,7 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
 	struct bnx2x *bp = netdev_priv(dev);
 
 	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
+		pr_err("Handling parity error recovery. Try again later\n");
 		return -EAGAIN;
 	}
 
@@ -3485,7 +3517,7 @@ int bnx2x_resume(struct pci_dev *pdev)
 	bp = netdev_priv(dev);
 
 	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
+		pr_err("Handling parity error recovery. Try again later\n");
 		return -EAGAIN;
 	}
 
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 223bfeebc597..f290b23e57e7 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1289,7 +1289,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp,
 	txdata->txq_index = txq_index;
 	txdata->tx_cons_sb = tx_cons_sb;
 
-	DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d",
+	DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d\n",
 	   txdata->cid, txdata->txq_index);
 }
 
@@ -1333,7 +1333,7 @@ static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
 	bnx2x_init_txdata(bp, &bnx2x_fcoe(bp, txdata[0]),
 			  fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX);
 
-	DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)", fp->index);
+	DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)\n", fp->index);
 
 	/* qZone id equals to FW (per path) client id */
 	bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp);
@@ -1481,8 +1481,8 @@ static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg)
 	u16 max_cfg = (mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
 			      FUNC_MF_CFG_MAX_BW_SHIFT;
 	if (!max_cfg) {
-		BNX2X_ERR("Illegal configuration detected for Max BW - "
-			  "using 100 instead\n");
+		DP(NETIF_MSG_LINK,
+		   "Max BW configured to 0 - using 100 instead\n");
 		max_cfg = 100;
 	}
 	return max_cfg;
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index a4ea35f6a456..0b9bd551580b 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -16,6 +16,9 @@
  * Written by: Dmitry Kravkov
  *
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/netdevice.h>
 #include <linux/types.h>
 #include <linux/errno.h>
@@ -350,7 +353,7 @@ static void bnx2x_dcbx_map_nw(struct bnx2x *bp)
 		if (cos_params[i].pri_bitmask & nw_prio) {
 			/* extend the bitmask with unmapped */
 			DP(NETIF_MSG_LINK,
-			   "cos %d extended with 0x%08x", i, unmapped);
+			   "cos %d extended with 0x%08x\n", i, unmapped);
 			cos_params[i].pri_bitmask |= unmapped;
 			break;
 		}
@@ -920,7 +923,7 @@ static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp,
 
 void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled)
 {
-	if (!CHIP_IS_E1x(bp)) {
+	if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3(bp)) {
 		bp->dcb_state = dcb_on;
 		bp->dcbx_enabled = dcbx_enabled;
 	} else {
diff --git a/drivers/net/bnx2x/bnx2x_dcb.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
index 2c6a3bca6f28..2c6a3bca6f28 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
diff --git a/drivers/net/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
index b983825d0ee9..b983825d0ee9 100644
--- a/drivers/net/bnx2x/bnx2x_dump.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 221863059dae..767c22983c17 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -14,6 +14,9 @@
  * Statistics and Link management by Yitchak Gertner
  *
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/ethtool.h>
 #include <linux/netdevice.h>
 #include <linux/types.h>
@@ -239,9 +242,9 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	cmd->maxrxpkt = 0;
 
 	DP(NETIF_MSG_LINK, "ethtool_cmd: cmd %d\n"
-	   DP_LEVEL "  supported 0x%x  advertising 0x%x  speed %u\n"
-	   DP_LEVEL "  duplex %d  port %d  phy_address %d  transceiver %d\n"
-	   DP_LEVEL "  autoneg %d  maxtxpkt %d  maxrxpkt %d\n",
+	   "  supported 0x%x  advertising 0x%x  speed %u\n"
+	   "  duplex %d  port %d  phy_address %d  transceiver %d\n"
+	   "  autoneg %d  maxtxpkt %d  maxrxpkt %d\n",
 	   cmd->cmd, cmd->supported, cmd->advertising,
 	   ethtool_cmd_speed(cmd),
 	   cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
@@ -482,7 +485,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	}
 
 	DP(NETIF_MSG_LINK, "req_line_speed %d\n"
-	   DP_LEVEL "  req_duplex %d  advertising 0x%x\n",
+	   "  req_duplex %d  advertising 0x%x\n",
 	   bp->link_params.req_line_speed[cfg_idx],
 	   bp->link_params.req_duplex[cfg_idx],
 	   bp->port.advertising[cfg_idx]);
@@ -1028,7 +1031,7 @@ static int bnx2x_get_eeprom(struct net_device *dev,
 		return -EAGAIN;
 
 	DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
-	   DP_LEVEL "  magic 0x%x  offset 0x%x (%d)  len 0x%x (%d)\n",
+	   "  magic 0x%x  offset 0x%x (%d)  len 0x%x (%d)\n",
 	   eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
 	   eeprom->len, eeprom->len);
 
@@ -1199,7 +1202,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
 		return -EAGAIN;
 
 	DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
-	   DP_LEVEL "  magic 0x%x  offset 0x%x (%d)  len 0x%x (%d)\n",
+	   "  magic 0x%x  offset 0x%x (%d)  len 0x%x (%d)\n",
 	   eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
 	   eeprom->len, eeprom->len);
 
@@ -1328,7 +1331,7 @@ static int bnx2x_set_ringparam(struct net_device *dev,
 	struct bnx2x *bp = netdev_priv(dev);
 
 	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
+		pr_err("Handling parity error recovery. Try again later\n");
 		return -EAGAIN;
 	}
 
@@ -1359,7 +1362,7 @@ static void bnx2x_get_pauseparam(struct net_device *dev,
 			    BNX2X_FLOW_CTRL_TX);
 
 	DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n"
-	   DP_LEVEL "  autoneg %d  rx_pause %d  tx_pause %d\n",
+	   "  autoneg %d  rx_pause %d  tx_pause %d\n",
 	   epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
 }
 
@@ -1372,7 +1375,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 		return 0;
 
 	DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n"
-	   DP_LEVEL "  autoneg %d  rx_pause %d  tx_pause %d\n",
+	   "  autoneg %d  rx_pause %d  tx_pause %d\n",
 	   epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
 
 	bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_AUTO;
@@ -1970,7 +1973,7 @@ static void bnx2x_self_test(struct net_device *dev,
 	struct bnx2x *bp = netdev_priv(dev);
 	u8 is_serdes;
 	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
+		pr_err("Handling parity error recovery. Try again later\n");
 		etest->flags |= ETH_TEST_FL_FAILED;
 		return;
 	}
diff --git a/drivers/net/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
index 998652a1b858..998652a1b858 100644
--- a/drivers/net/bnx2x/bnx2x_fw_defs.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
diff --git a/drivers/net/bnx2x/bnx2x_fw_file_hdr.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h
index f4a07fbaed05..f4a07fbaed05 100644
--- a/drivers/net/bnx2x/bnx2x_fw_file_hdr.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 06727f32e505..e44b858ff12f 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -704,6 +704,7 @@ struct port_hw_cfg {		    /* port 0: 0x12c  port 1: 0x2bc */
 		#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84833      0x00000d00
 		#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54618SE    0x00000e00
 		#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8722       0x00000f00
+		#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54616      0x00001000
 		#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_FAILURE       0x0000fd00
 		#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_NOT_CONN      0x0000ff00
 
@@ -759,6 +760,7 @@ struct port_hw_cfg {		    /* port 0: 0x12c  port 1: 0x2bc */
 		#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833       0x00000d00
 		#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE     0x00000e00
 		#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722        0x00000f00
+		#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616       0x00001000
 		#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT_WC      0x0000fc00
 		#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE        0x0000fd00
 		#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN       0x0000ff00
@@ -1204,6 +1206,8 @@ struct drv_port_mb {
 
 	#define LINK_STATUS_PFC_ENABLED				0x20000000
 
+	#define LINK_STATUS_PHYSICAL_LINK_FLAG			0x40000000
+
 	u32 port_stx;
 
 	u32 stat_nig_timer;
diff --git a/drivers/net/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
index 4d748e77d1ac..4d748e77d1ac 100644
--- a/drivers/net/bnx2x/bnx2x_init.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
diff --git a/drivers/net/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
index 7ec1724753ad..7ec1724753ad 100644
--- a/drivers/net/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index bcd8f0038628..8e9b87be3002 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -694,8 +694,8 @@ static int bnx2x_ets_e3b0_disabled(const struct link_params *params,
 	struct bnx2x *bp = params->bp;
 
 	if (!CHIP_IS_E3B0(bp)) {
-		DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0"
-				   "\n");
+		DP(NETIF_MSG_LINK,
+		   "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n");
 		return -EINVAL;
 	}
 
@@ -854,8 +854,8 @@ static int bnx2x_ets_e3b0_get_total_bw(
 		if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) {
 
 			if (0 == ets_params->cos[cos_idx].params.bw_params.bw) {
-				DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"
-						   "was set to 0\n");
+				DP(NETIF_MSG_LINK,
+				   "bnx2x_ets_E3B0_config BW was set to 0\n");
 			return -EINVAL;
 		}
 		*total_bw +=
@@ -866,12 +866,12 @@ static int bnx2x_ets_e3b0_get_total_bw(
 	/*Check taotl BW is valid */
 	if ((100 != *total_bw) || (0 == *total_bw)) {
 		if (0 == *total_bw) {
-			DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW"
-					   "shouldn't be 0\n");
+			DP(NETIF_MSG_LINK,
+			   "bnx2x_ets_E3B0_config toatl BW shouldn't be 0\n");
 			return -EINVAL;
 		}
-		DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW should be"
-				   "100\n");
+		DP(NETIF_MSG_LINK,
+		   "bnx2x_ets_E3B0_config toatl BW should be 100\n");
 		/**
 		*   We can handle a case whre the BW isn't 100 this can happen
 		*   if the TC are joined.
@@ -908,13 +908,13 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params,
 
 	if (DCBX_INVALID_COS != sp_pri_to_cos[pri]) {
 		DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "
-				   "parameter There can't be two COS's with"
+				   "parameter There can't be two COS's with "
 				   "the same strict pri\n");
 		return -EINVAL;
 	}
 
 	if (pri > max_num_of_cos) {
-		DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid"
+		DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "
 			       "parameter Illegal strict priority\n");
 	    return -EINVAL;
 	}
@@ -1090,8 +1090,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
 	u8 cos_entry = 0;
 
 	if (!CHIP_IS_E3B0(bp)) {
-		DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0"
-				   "\n");
+		DP(NETIF_MSG_LINK,
+		   "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n");
 		return -EINVAL;
 	}
 
@@ -1108,8 +1108,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
 	bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params,
 						   &total_bw);
 	if (0 != bnx2x_status) {
-		DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config get_total_bw failed "
-				   "\n");
+		DP(NETIF_MSG_LINK,
+		   "bnx2x_ets_E3B0_config get_total_bw failed\n");
 		return -EINVAL;
 	}
 
@@ -1144,13 +1144,13 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
 				cos_entry);
 
 		} else {
-			DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config cos state not"
-					   " valid\n");
+			DP(NETIF_MSG_LINK,
+			   "bnx2x_ets_e3b0_config cos state not valid\n");
 			return -EINVAL;
 		}
 		if (0 != bnx2x_status) {
-			DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config set cos bw "
-					   "failed\n");
+			DP(NETIF_MSG_LINK,
+			   "bnx2x_ets_e3b0_config set cos bw failed\n");
 			return bnx2x_status;
 		}
 	}
@@ -1160,8 +1160,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
 							 sp_pri_to_cos);
 
 	if (0 != bnx2x_status) {
-		DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config set_pri_cli_reg "
-				   "failed\n");
+		DP(NETIF_MSG_LINK,
+		   "bnx2x_ets_E3B0_config set_pri_cli_reg failed\n");
 		return bnx2x_status;
 	}
 
@@ -1546,6 +1546,12 @@ static void bnx2x_umac_enable(struct link_params *params,
 			       vars->line_speed);
 		break;
 	}
+	if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
+		val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE;
+
+	if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX))
+		val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE;
+
 	REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val);
 	udelay(50);
 
@@ -1612,8 +1618,8 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
 
 	if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) &
 	     MISC_REGISTERS_RESET_REG_2_XMAC)) {
-		DP(NETIF_MSG_LINK, "XMAC already out of reset"
-				   " in 4-port mode\n");
+		DP(NETIF_MSG_LINK,
+		   "XMAC already out of reset in 4-port mode\n");
 		return;
 	}
 
@@ -1636,13 +1642,13 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
 		/*  Set the number of ports on the system side to 1 */
 		REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0);
 		if (max_speed == SPEED_10000) {
-			DP(NETIF_MSG_LINK, "Init XMAC to 10G x 1"
-					   " port per path\n");
+			DP(NETIF_MSG_LINK,
+			   "Init XMAC to 10G x 1 port per path\n");
 			/* Set the number of ports on the Warp Core to 10G */
 			REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3);
 		} else {
-			DP(NETIF_MSG_LINK, "Init XMAC to 20G x 2 ports"
-					   " per path\n");
+			DP(NETIF_MSG_LINK,
+			   "Init XMAC to 20G x 2 ports per path\n");
 			/* Set the number of ports on the Warp Core to 20G */
 			REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1);
 		}
@@ -1661,10 +1667,20 @@ static void bnx2x_xmac_disable(struct link_params *params)
 {
 	u8 port = params->port;
 	struct bnx2x *bp = params->bp;
-	u32 xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+	u32 pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
 
 	if (REG_RD(bp, MISC_REG_RESET_REG_2) &
 	    MISC_REGISTERS_RESET_REG_2_XMAC) {
+		/*
+		 * Send an indication to change the state in the NIG back to XON
+		 * Clearing this bit enables the next set of this bit to get
+		 * rising edge
+		 */
+		pfc_ctrl = REG_RD(bp, xmac_base + XMAC_REG_PFC_CTRL_HI);
+		REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI,
+		       (pfc_ctrl & ~(1<<1)));
+		REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI,
+		       (pfc_ctrl | (1<<1)));
 		DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port);
 		REG_WR(bp, xmac_base + XMAC_REG_CTRL, 0);
 		usleep_range(1000, 1000);
@@ -1729,6 +1745,10 @@ static int bnx2x_emac_enable(struct link_params *params,
 
 	DP(NETIF_MSG_LINK, "enabling EMAC\n");
 
+	/* Disable BMAC */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+	       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
 	/* enable emac and not bmac */
 	REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
 
@@ -2583,12 +2603,6 @@ static int bnx2x_bmac1_enable(struct link_params *params,
 	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
 		    wb_data, 2);
 
-	if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
-		REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LSS_STATUS,
-			    wb_data, 2);
-		if (wb_data[0] > 0)
-			return -ESRCH;
-	}
 	return 0;
 }
 
@@ -2654,16 +2668,6 @@ static int bnx2x_bmac2_enable(struct link_params *params,
 	udelay(30);
 	bnx2x_update_pfc_bmac2(params, vars, is_lb);
 
-	if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
-		REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LSS_STAT,
-			    wb_data, 2);
-		if (wb_data[0] > 0) {
-			DP(NETIF_MSG_LINK, "Got bad LSS status 0x%x\n",
-				       wb_data[0]);
-			return -ESRCH;
-		}
-	}
-
 	return 0;
 }
 
@@ -2949,7 +2953,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
 	u32 val;
 	u16 i;
 	int rc = 0;
-
+	if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
+		bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
+			      EMAC_MDIO_STATUS_10MB);
 	/* address */
 	val = ((phy->addr << 21) | (devad << 16) | reg |
 	       EMAC_MDIO_COMM_COMMAND_ADDRESS |
@@ -3003,6 +3009,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
 		}
 	}
 
+	if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
+		bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
+			       EMAC_MDIO_STATUS_10MB);
 	return rc;
 }
 
@@ -3012,6 +3021,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
 	u32 tmp;
 	u8 i;
 	int rc = 0;
+	if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
+		bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
+			      EMAC_MDIO_STATUS_10MB);
 
 	/* address */
 
@@ -3065,7 +3077,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
 			bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val);
 		}
 	}
-
+	if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
+		bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
+			       EMAC_MDIO_STATUS_10MB);
 	return rc;
 }
 
@@ -3945,8 +3959,8 @@ static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy,
 			val16 |= 0x0040;
 			break;
 		default:
-			DP(NETIF_MSG_LINK, "Speed not supported: 0x%x"
-					   "\n", phy->req_line_speed);
+			DP(NETIF_MSG_LINK,
+			   "Speed not supported: 0x%x\n", phy->req_line_speed);
 			return;
 		}
 
@@ -4078,9 +4092,9 @@ static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp,
 		 */
 		if ((cfg_pin < PIN_CFG_GPIO0_P0) ||
 		    (cfg_pin > PIN_CFG_GPIO3_P1)) {
-			DP(NETIF_MSG_LINK, "ERROR: Invalid cfg pin %x for "
-					   "module detect indication\n",
-				       cfg_pin);
+			DP(NETIF_MSG_LINK,
+			   "ERROR: Invalid cfg pin %x for module detect indication\n",
+			   cfg_pin);
 			return -EINVAL;
 		}
 
@@ -4208,8 +4222,9 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy,
 			break;
 
 		default:
-			DP(NETIF_MSG_LINK, "Unsupported Serdes Net Interface "
-					   "0x%x\n", serdes_net_if);
+			DP(NETIF_MSG_LINK,
+			   "Unsupported Serdes Net Interface 0x%x\n",
+			   serdes_net_if);
 			return;
 		}
 	}
@@ -4353,6 +4368,9 @@ void bnx2x_link_status_update(struct link_params *params,
 
 	vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
 	vars->phy_flags = PHY_XGXS_FLAG;
+	if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
+		vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
+
 	if (vars->link_up) {
 		DP(NETIF_MSG_LINK, "phy link up\n");
 
@@ -4444,6 +4462,8 @@ void bnx2x_link_status_update(struct link_params *params,
 
 		/* indicate no mac active */
 		vars->mac_type = MAC_TYPE_NONE;
+		if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
+			vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
 	}
 
 	/* Sync media type */
@@ -5903,20 +5923,30 @@ int bnx2x_set_led(struct link_params *params,
 				tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
 				EMAC_WR(bp, EMAC_REG_EMAC_LED,
 					(tmp | EMAC_LED_OVERRIDE));
-				return rc;
+				/*
+				 * return here without enabling traffic
+				 * LED blink andsetting rate in ON mode.
+				 * In oper mode, enabling LED blink
+				 * and setting rate is needed.
+				 */
+				if (mode == LED_MODE_ON)
+					return rc;
 			}
-		} else if (SINGLE_MEDIA_DIRECT(params) &&
-			   (CHIP_IS_E1x(bp) ||
-			    CHIP_IS_E2(bp))) {
+		} else if (SINGLE_MEDIA_DIRECT(params)) {
 			/*
 			 * This is a work-around for HW issue found when link
 			 * is up in CL73
 			 */
-			REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
 			REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
-		} else {
+			if (CHIP_IS_E1x(bp) ||
+			    CHIP_IS_E2(bp) ||
+			    (mode == LED_MODE_ON))
+				REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+			else
+				REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+				       hw_led_mode);
+		} else
 			REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
-		}
 
 		REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
 		/* Set blinking rate to ~15.9Hz */
@@ -6098,8 +6128,8 @@ static int bnx2x_link_initialize(struct link_params *params,
 			if (phy_index == EXT_PHY2 &&
 			    (bnx2x_phy_selection(params) ==
 			     PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
-				DP(NETIF_MSG_LINK, "Not initializing"
-						" second phy\n");
+				DP(NETIF_MSG_LINK,
+				   "Not initializing second phy\n");
 				continue;
 			}
 			params->phy[phy_index].config_init(
@@ -6160,6 +6190,7 @@ static int bnx2x_update_link_down(struct link_params *params,
 	/* update shared memory */
 	vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
 			       LINK_STATUS_LINK_UP |
+			       LINK_STATUS_PHYSICAL_LINK_FLAG |
 			       LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
 			       LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
 			       LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
@@ -6197,7 +6228,8 @@ static int bnx2x_update_link_up(struct link_params *params,
 	u8 port = params->port;
 	int rc = 0;
 
-	vars->link_status |= LINK_STATUS_LINK_UP;
+	vars->link_status |= (LINK_STATUS_LINK_UP |
+			      LINK_STATUS_PHYSICAL_LINK_FLAG);
 	vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
 
 	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
@@ -6416,8 +6448,8 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 		 */
 		if (active_external_phy == EXT_PHY1) {
 			if (params->phy[EXT_PHY2].phy_specific_func) {
-				DP(NETIF_MSG_LINK, "Disabling TX on"
-						   " EXT_PHY2\n");
+				DP(NETIF_MSG_LINK,
+				   "Disabling TX on EXT_PHY2\n");
 				params->phy[EXT_PHY2].phy_specific_func(
 					&params->phy[EXT_PHY2],
 					params, DISABLE_TX);
@@ -7310,8 +7342,8 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 	u16 val = 0;
 	u16 i;
 	if (byte_cnt > 16) {
-		DP(NETIF_MSG_LINK, "Reading from eeprom is"
-			    " is limited to 0xf\n");
+		DP(NETIF_MSG_LINK,
+		   "Reading from eeprom is limited to 0xf\n");
 		return -EINVAL;
 	}
 	/* Set the read command byte count */
@@ -7382,8 +7414,8 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 					" addr %d, cnt %d\n",
 					addr, byte_cnt);*/
 	if (byte_cnt > 16) {
-		DP(NETIF_MSG_LINK, "Reading from eeprom is"
-			    " is limited to 16 bytes\n");
+		DP(NETIF_MSG_LINK,
+		   "Reading from eeprom is limited to 16 bytes\n");
 		return -EINVAL;
 	}
 
@@ -7412,8 +7444,8 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 	u16 val, i;
 
 	if (byte_cnt > 16) {
-		DP(NETIF_MSG_LINK, "Reading from eeprom is"
-			    " is limited to 0xf\n");
+		DP(NETIF_MSG_LINK,
+		   "Reading from eeprom is limited to 0xf\n");
 		return -EINVAL;
 	}
 
@@ -7560,13 +7592,14 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 			check_limiting_mode = 1;
 		} else if (copper_module_type &
 			SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
-				DP(NETIF_MSG_LINK, "Passive Copper"
-					    " cable detected\n");
+				DP(NETIF_MSG_LINK,
+				   "Passive Copper cable detected\n");
 				*edc_mode =
 				      EDC_MODE_PASSIVE_DAC;
 		} else {
-			DP(NETIF_MSG_LINK, "Unknown copper-cable-"
-				     "type 0x%x !!!\n", copper_module_type);
+			DP(NETIF_MSG_LINK,
+			   "Unknown copper-cable-type 0x%x !!!\n",
+			   copper_module_type);
 			return -EINVAL;
 		}
 		break;
@@ -7604,8 +7637,8 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 						 SFP_EEPROM_OPTIONS_ADDR,
 						 SFP_EEPROM_OPTIONS_SIZE,
 						 options) != 0) {
-			DP(NETIF_MSG_LINK, "Failed to read Option"
-				" field from module EEPROM\n");
+			DP(NETIF_MSG_LINK,
+			   "Failed to read Option field from module EEPROM\n");
 			return -EINVAL;
 		}
 		if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK))
@@ -7646,15 +7679,15 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
 		   FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) {
 		/* Use first phy request only in case of non-dual media*/
 		if (DUAL_MEDIA(params)) {
-			DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
-			   "verification\n");
+			DP(NETIF_MSG_LINK,
+			   "FW does not support OPT MDL verification\n");
 			return -EINVAL;
 		}
 		cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL;
 	} else {
 		/* No support in OPT MDL detection */
-		DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
-			  "verification\n");
+		DP(NETIF_MSG_LINK,
+		   "FW does not support OPT MDL verification\n");
 		return -EINVAL;
 	}
 
@@ -7705,8 +7738,9 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
 	for (timeout = 0; timeout < 60; timeout++) {
 		if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
 		    == 0) {
-			DP(NETIF_MSG_LINK, "SFP+ module initialization "
-				     "took %d ms\n", timeout * 5);
+			DP(NETIF_MSG_LINK,
+			   "SFP+ module initialization took %d ms\n",
+			   timeout * 5);
 			return 0;
 		}
 		msleep(5);
@@ -7998,6 +8032,9 @@ static void bnx2x_warpcore_set_limiting_mode(struct link_params *params,
 	bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
 			MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val);
 
+	/* Restart microcode to re-read the new mode */
+	bnx2x_warpcore_reset_lane(bp, phy, 1);
+	bnx2x_warpcore_reset_lane(bp, phy, 0);
 
 }
 
@@ -8116,7 +8153,6 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
 				 offsetof(struct shmem_region, dev_info.
 					  port_feature_config[params->port].
 					  config));
-
 		bnx2x_set_gpio_int(bp, gpio_num,
 				   MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
 				   gpio_port);
@@ -8125,8 +8161,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
 		 * Disable transmit for this module
 		 */
 		phy->media_type = ETH_PHY_NOT_PRESENT;
-		if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
-		    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+		if (((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+		     PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) ||
+		    CHIP_IS_E3(bp))
 			bnx2x_sfp_set_transmitter(params, phy, 0);
 	}
 }
@@ -8228,9 +8265,6 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
 	u16 cnt, val, tmp1;
 	struct bnx2x *bp = params->bp;
 
-	/* SPF+ PHY: Set flag to check for Tx error */
-	vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
 		       MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
 	/* HW reset */
@@ -8414,9 +8448,6 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
 	struct bnx2x *bp = params->bp;
 	DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
 
-	/* SPF+ PHY: Set flag to check for Tx error */
-	vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
 	bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
 	bnx2x_wait_reset_complete(bp, phy, params);
 
@@ -8478,8 +8509,8 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
 	/* Set TX PreEmphasis if needed */
 	if ((params->feature_config_flags &
 	     FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
-		DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
-			 "TX_CTRL2 0x%x\n",
+		DP(NETIF_MSG_LINK,
+		   "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n",
 			 phy->tx_preemphasis[0],
 			 phy->tx_preemphasis[1]);
 		bnx2x_cl45_write(bp, phy,
@@ -8585,9 +8616,6 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
 	struct bnx2x *bp = params->bp;
 	/* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */
 
-	/* SPF+ PHY: Set flag to check for Tx error */
-	vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
 	bnx2x_wait_reset_complete(bp, phy, params);
 	rx_alarm_ctrl_val = (1<<2) | (1<<5) ;
 	/* Should be 0x6 to enable XS on Tx side. */
@@ -8763,8 +8791,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
 	if (mod_abs & (1<<8)) {
 
 		/* Module is absent */
-		DP(NETIF_MSG_LINK, "MOD_ABS indication "
-			    "show module is absent\n");
+		DP(NETIF_MSG_LINK,
+		   "MOD_ABS indication show module is absent\n");
 		phy->media_type = ETH_PHY_NOT_PRESENT;
 		/*
 		 * 1. Set mod_abs to detect next module
@@ -8791,8 +8819,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
 
 	} else {
 		/* Module is present */
-		DP(NETIF_MSG_LINK, "MOD_ABS indication "
-			    "show module is present\n");
+		DP(NETIF_MSG_LINK,
+		   "MOD_ABS indication show module is present\n");
 		/*
 		 * First disable transmitter, and if the module is ok, the
 		 * module_detection will enable it
@@ -8883,8 +8911,9 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
 		if ((val1 & (1<<8)) == 0) {
 			if (!CHIP_IS_E1x(bp))
 				oc_port = BP_PATH(bp) + (params->port << 1);
-			DP(NETIF_MSG_LINK, "8727 Power fault has been detected"
-				       " on port %d\n", oc_port);
+			DP(NETIF_MSG_LINK,
+			   "8727 Power fault has been detected on port %d\n",
+			   oc_port);
 			netdev_err(bp->dev, "Error:  Power fault on Port %d has"
 					    " been detected and the power to "
 					    "that SFP+ module has been removed"
@@ -9243,7 +9272,13 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
 	if (phy->req_duplex == DUPLEX_FULL)
 		autoneg_val |= (1<<8);
 
-	bnx2x_cl45_write(bp, phy,
+	/*
+	 * Always write this if this is not 84833.
+	 * For 84833, write it only when it's a forced speed.
+	 */
+	if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
+		((autoneg_val & (1<<12)) == 0))
+		bnx2x_cl45_write(bp, phy,
 			 MDIO_AN_DEVAD,
 			 MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val);
 
@@ -9257,13 +9292,12 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
 			bnx2x_cl45_write(bp, phy,
 				 MDIO_AN_DEVAD, MDIO_AN_REG_CTRL,
 				 0x3200);
-	} else if (phy->req_line_speed != SPEED_10 &&
-		   phy->req_line_speed != SPEED_100) {
+	} else
 		bnx2x_cl45_write(bp, phy,
 				 MDIO_AN_DEVAD,
 				 MDIO_AN_REG_8481_10GBASE_T_AN_CTRL,
 				 1);
-	}
+
 	/* Save spirom version */
 	bnx2x_save_848xx_spirom_version(phy, params);
 
@@ -9660,8 +9694,8 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
 				MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
 				&legacy_status);
 
-		DP(NETIF_MSG_LINK, "Legacy speed status"
-			     " = 0x%x\n", legacy_status);
+		DP(NETIF_MSG_LINK, "Legacy speed status = 0x%x\n",
+		   legacy_status);
 		link_up = ((legacy_status & (1<<11)) == (1<<11));
 		if (link_up) {
 			legacy_speed = (legacy_status & (3<<9));
@@ -9679,9 +9713,10 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
 			else
 				vars->duplex = DUPLEX_HALF;
 
-			DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
-				   " is_duplex_full= %d\n", vars->line_speed,
-				   (vars->duplex == DUPLEX_FULL));
+			DP(NETIF_MSG_LINK,
+			   "Link is up in %dMbps, is_duplex_full= %d\n",
+			   vars->line_speed,
+			   (vars->duplex == DUPLEX_FULL));
 			/* Check legacy speed AN resolution */
 			bnx2x_cl45_read(bp, phy,
 					MDIO_AN_DEVAD,
@@ -9756,11 +9791,9 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
 		bnx2x_cl45_read(bp, phy,
 				MDIO_CTL_DEVAD,
 				0x400f, &val16);
-		/* Put to low power mode on newer FW */
-		if ((val16 & 0x303f) > 0x1009)
-			bnx2x_cl45_write(bp, phy,
-					MDIO_PMA_DEVAD,
-					MDIO_PMA_REG_CTRL, 0x800);
+		bnx2x_cl45_write(bp, phy,
+				MDIO_PMA_DEVAD,
+				MDIO_PMA_REG_CTRL, 0x800);
 	}
 }
 
@@ -10191,8 +10224,15 @@ static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
 	u32 cfg_pin;
 	u8 port;
 
-	/* This works with E3 only, no need to check the chip
-	   before determining the port. */
+	/*
+	 * In case of no EPIO routed to reset the GPHY, put it
+	 * in low power mode.
+	 */
+	bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800);
+	/*
+	 * This works with E3 only, no need to check the chip
+	 * before determining the port.
+	 */
 	port = params->port;
 	cfg_pin = (REG_RD(bp, params->shmem_base +
 			offsetof(struct shmem_region,
@@ -10251,9 +10291,10 @@ static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy,
 		} else /* Should not happen */
 			vars->line_speed = 0;
 
-		DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
-			   " is_duplex_full= %d\n", vars->line_speed,
-			   (vars->duplex == DUPLEX_FULL));
+		DP(NETIF_MSG_LINK,
+		   "Link is up in %dMbps, is_duplex_full= %d\n",
+		   vars->line_speed,
+		   (vars->duplex == DUPLEX_FULL));
 
 		/* Check legacy speed AN resolution */
 		bnx2x_cl22_read(bp, phy,
@@ -10603,7 +10644,8 @@ static struct bnx2x_phy phy_warpcore = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
 	.addr		= 0xff,
 	.def_md_devad	= 0,
-	.flags		= FLAGS_HW_LOCK_REQUIRED,
+	.flags		= (FLAGS_HW_LOCK_REQUIRED |
+			   FLAGS_TX_ERROR_CHECK),
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -10729,7 +10771,8 @@ static struct bnx2x_phy phy_8706 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
 	.addr		= 0xff,
 	.def_md_devad	= 0,
-	.flags		= FLAGS_INIT_XGXS_FIRST,
+	.flags		= (FLAGS_INIT_XGXS_FIRST |
+			   FLAGS_TX_ERROR_CHECK),
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -10760,7 +10803,8 @@ static struct bnx2x_phy phy_8726 = {
 	.addr		= 0xff,
 	.def_md_devad	= 0,
 	.flags		= (FLAGS_HW_LOCK_REQUIRED |
-			   FLAGS_INIT_XGXS_FIRST),
+			   FLAGS_INIT_XGXS_FIRST |
+			   FLAGS_TX_ERROR_CHECK),
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -10791,7 +10835,8 @@ static struct bnx2x_phy phy_8727 = {
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
 	.addr		= 0xff,
 	.def_md_devad	= 0,
-	.flags		= FLAGS_FAN_FAILURE_DET_REQ,
+	.flags		= (FLAGS_FAN_FAILURE_DET_REQ |
+			   FLAGS_TX_ERROR_CHECK),
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -11112,6 +11157,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
 		 */
 		if (CHIP_REV(bp) == CHIP_REV_Ax)
 			phy->flags |= FLAGS_MDC_MDIO_WA;
+		else
+			phy->flags |= FLAGS_MDC_MDIO_WA_B0;
 	} else {
 		switch (switch_cfg) {
 		case SWITCH_CFG_1G:
@@ -11195,6 +11242,7 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833:
 		*phy = phy_84833;
 		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616:
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE:
 		*phy = phy_54618se;
 		break;
@@ -11295,8 +11343,9 @@ static void bnx2x_phy_def_cfg(struct link_params *params,
 						      dev_info.
 			port_hw_config[params->port].speed_capability_mask));
 	}
-	DP(NETIF_MSG_LINK, "Default config phy idx %x cfg 0x%x speed_cap_mask"
-		       " 0x%x\n", phy_index, link_config, phy->speed_cap_mask);
+	DP(NETIF_MSG_LINK,
+	   "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x\n",
+	   phy_index, link_config, phy->speed_cap_mask);
 
 	phy->req_duplex = DUPLEX_FULL;
 	switch (link_config  & PORT_FEATURE_LINK_SPEED_MASK) {
@@ -11500,13 +11549,12 @@ void bnx2x_init_xmac_loopback(struct link_params *params,
 	 * Set WC to loopback mode since link is required to provide clock
 	 * to the XMAC in 20G mode
 	 */
-	if (vars->line_speed == SPEED_20000) {
-		bnx2x_set_aer_mmd(params, &params->phy[0]);
-		bnx2x_warpcore_reset_lane(bp, &params->phy[0], 0);
-		params->phy[INT_PHY].config_loopback(
+	bnx2x_set_aer_mmd(params, &params->phy[0]);
+	bnx2x_warpcore_reset_lane(bp, &params->phy[0], 0);
+	params->phy[INT_PHY].config_loopback(
 			&params->phy[INT_PHY],
 			params);
-	}
+
 	bnx2x_xmac_enable(params, vars, 1);
 	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
 }
@@ -11684,12 +11732,16 @@ int bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
 	bnx2x_set_led(params, vars, LED_MODE_OFF, 0);
 
 	if (reset_ext_phy) {
+		bnx2x_set_mdio_clk(bp, params->chip_id, port);
 		for (phy_index = EXT_PHY1; phy_index < params->num_phys;
 		      phy_index++) {
-			if (params->phy[phy_index].link_reset)
+			if (params->phy[phy_index].link_reset) {
+				bnx2x_set_aer_mmd(params,
+						  &params->phy[phy_index]);
 				params->phy[phy_index].link_reset(
 					&params->phy[phy_index],
 					params);
+			}
 			if (params->phy[phy_index].flags &
 			    FLAGS_REARM_LATCH_SIGNAL)
 				clear_latch_ind = 1;
@@ -12178,10 +12230,6 @@ static void bnx2x_analyze_link_error(struct link_params *params,
 	u8 led_mode;
 	u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0;
 
-	/*DP(NETIF_MSG_LINK, "CHECK LINK: %x half_open:%x-> lss:%x\n",
-		       vars->link_up,
-		       half_open_conn, lss_status);*/
-
 	if ((lss_status ^ half_open_conn) == 0)
 		return;
 
@@ -12194,6 +12242,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
 	 * b. Update link_vars->link_up
 	 */
 	if (lss_status) {
+		DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n");
 		vars->link_status &= ~LINK_STATUS_LINK_UP;
 		vars->link_up = 0;
 		vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
@@ -12203,6 +12252,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
 		 */
 		led_mode = LED_MODE_OFF;
 	} else {
+		DP(NETIF_MSG_LINK, "Remote Fault cleared\n");
 		vars->link_status |= LINK_STATUS_LINK_UP;
 		vars->link_up = 1;
 		vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
@@ -12219,6 +12269,15 @@ static void bnx2x_analyze_link_error(struct link_params *params,
 	bnx2x_notify_link_changed(bp);
 }
 
+/******************************************************************************
+* Description:
+*	This function checks for half opened connection change indication.
+*	When such change occurs, it calls the bnx2x_analyze_link_error
+*	to check if Remote Fault is set or cleared. Reception of remote fault
+*	status message in the MAC indicates that the peer's MAC has detected
+*	a fault, for example, due to break in the TX side of fiber.
+*
+******************************************************************************/
 static void bnx2x_check_half_open_conn(struct link_params *params,
 				       struct link_vars *vars)
 {
@@ -12229,9 +12288,28 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
 	if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0)
 		return;
 
-	if (!CHIP_IS_E3(bp) &&
+	if (CHIP_IS_E3(bp) &&
 	    (REG_RD(bp, MISC_REG_RESET_REG_2) &
-		   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))) {
+	      (MISC_REGISTERS_RESET_REG_2_XMAC))) {
+		/* Check E3 XMAC */
+		/*
+		 * Note that link speed cannot be queried here, since it may be
+		 * zero while link is down. In case UMAC is active, LSS will
+		 * simply not be set
+		 */
+		mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+
+		/* Clear stick bits (Requires rising edge) */
+		REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
+		REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
+		       XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
+		       XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
+		if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS))
+			lss_status = 1;
+
+		bnx2x_analyze_link_error(params, vars, lss_status);
+	} else if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+		   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) {
 		/* Check E1X / E2 BMAC */
 		u32 lss_status_reg;
 		u32 wb_data[2];
@@ -12253,14 +12331,20 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
 void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
+	u16 phy_idx;
 	if (!params) {
-		DP(NETIF_MSG_LINK, "Ininitliazed params !\n");
+		DP(NETIF_MSG_LINK, "Uninitialized params !\n");
 		return;
 	}
-	/* DP(NETIF_MSG_LINK, "Periodic called vars->phy_flags 0x%x speed 0x%x
-	 RESET_REG_2 0x%x\n", vars->phy_flags, vars->line_speed,
-	  REG_RD(bp, MISC_REG_RESET_REG_2)); */
-	bnx2x_check_half_open_conn(params, vars);
+
+	for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) {
+		if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) {
+			bnx2x_set_aer_mmd(params, &params->phy[phy_idx]);
+			bnx2x_check_half_open_conn(params, vars);
+			break;
+		}
+	}
+
 	if (CHIP_IS_E3(bp))
 		bnx2x_check_over_curr(params, vars);
 }
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index 6a7708d5da37..c12db6da213e 100644
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -145,6 +145,8 @@ struct bnx2x_phy {
 #define FLAGS_SFP_NOT_APPROVED		(1<<7)
 #define FLAGS_MDC_MDIO_WA		(1<<8)
 #define FLAGS_DUMMY_READ		(1<<9)
+#define FLAGS_MDC_MDIO_WA_B0		(1<<10)
+#define FLAGS_TX_ERROR_CHECK		(1<<12)
 
 	/* preemphasis values for the rx side */
 	u16 rx_preemphasis[4];
@@ -276,7 +278,6 @@ struct link_vars {
 #define PHY_PHYSICAL_LINK_FLAG		(1<<2)
 #define PHY_HALF_OPEN_CONN_FLAG		(1<<3)
 #define PHY_OVER_CURRENT_FLAG		(1<<4)
-#define PHY_TX_ERROR_CHECK_FLAG		(1<<5)
 
 	u8 mac_type;
 #define MAC_TYPE_NONE		0
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 150709111548..85dd294aeaba 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -15,6 +15,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -37,6 +39,7 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
+#include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
@@ -350,17 +353,15 @@ static void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae,
 	default:
 		if (src_type == DMAE_CMD_SRC_PCI)
 			DP(msglvl, "DMAE: opcode 0x%08x\n"
-			   DP_LEVEL "src_addr [%x:%08x]  len [%d * 4]  "
-				    "dst_addr [none]\n"
-			   DP_LEVEL "comp_addr [%x:%08x]  comp_val 0x%08x\n",
+			   "src_addr [%x:%08x]  len [%d * 4]  dst_addr [none]\n"
+			   "comp_addr [%x:%08x]  comp_val 0x%08x\n",
 			   dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
 			   dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
 			   dmae->comp_val);
 		else
 			DP(msglvl, "DMAE: opcode 0x%08x\n"
-			   DP_LEVEL "src_addr [%08x]  len [%d * 4]  "
-				    "dst_addr [none]\n"
-			   DP_LEVEL "comp_addr [%x:%08x]  comp_val 0x%08x\n",
+			   "src_addr [%08x]  len [%d * 4]  dst_addr [none]\n"
+			   "comp_addr [%x:%08x]  comp_val 0x%08x\n",
 			   dmae->opcode, dmae->src_addr_lo >> 2,
 			   dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
 			   dmae->comp_val);
@@ -789,18 +790,15 @@ void bnx2x_panic_dump(struct bnx2x *bp)
 	BNX2X_ERR("     def (");
 	for (i = 0; i < HC_SP_SB_MAX_INDICES; i++)
 		pr_cont("0x%x%s",
-		       bp->def_status_blk->sp_sb.index_values[i],
-		       (i == HC_SP_SB_MAX_INDICES - 1) ? ")  " : " ");
+			bp->def_status_blk->sp_sb.index_values[i],
+			(i == HC_SP_SB_MAX_INDICES - 1) ? ")  " : " ");
 
 	for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++)
 		*((u32 *)&sp_sb_data + i) = REG_RD(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) +
 			i*sizeof(u32));
 
-	pr_cont("igu_sb_id(0x%x)  igu_seg_id(0x%x) "
-			 "pf_id(0x%x)  vnic_id(0x%x)  "
-			 "vf_id(0x%x)  vf_valid (0x%x) "
-			 "state(0x%x)\n",
+	pr_cont("igu_sb_id(0x%x)  igu_seg_id(0x%x) pf_id(0x%x)  vnic_id(0x%x)  vf_id(0x%x)  vf_valid (0x%x) state(0x%x)\n",
 	       sp_sb_data.igu_sb_id,
 	       sp_sb_data.igu_seg_id,
 	       sp_sb_data.p_func.pf_id,
@@ -3721,9 +3719,7 @@ static inline void bnx2x_clear_load_cnt(struct bnx2x *bp)
 
 static inline void _print_next_block(int idx, const char *blk)
 {
-	if (idx)
-		pr_cont(", ");
-	pr_cont("%s", blk);
+	pr_cont("%s%s", idx ? ", " : "", blk);
 }
 
 static inline int bnx2x_check_blocks_with_parity0(u32 sig, int par_num,
@@ -4388,7 +4384,7 @@ static inline void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp)
 static inline struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj(
 	struct bnx2x *bp, u32 cid)
 {
-	DP(BNX2X_MSG_SP, "retrieving fp from cid %d", cid);
+	DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid);
 #ifdef BCM_CNIC
 	if (cid == BNX2X_FCOE_ETH_CID)
 		return &bnx2x_fcoe(bp, q_obj);
@@ -5798,6 +5794,12 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
 
 	DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_ABS_FUNC(bp));
 
+	/*
+	 * take the UNDI lock to protect undi_unload flow from accessing
+	 * registers while we're resetting the chip
+	 */
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
 	bnx2x_reset_common(bp);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
 
@@ -5808,6 +5810,8 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
 	}
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
 
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
 	bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
 
 	if (!CHIP_IS_E1x(bp)) {
@@ -7176,7 +7180,7 @@ static inline void bnx2x_pf_q_prep_init(struct bnx2x *bp,
 	/* set maximum number of COSs supported by this queue */
 	init_params->max_cos = fp->max_cos;
 
-	DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d",
+	DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d\n",
 	    fp->index, init_params->max_cos);
 
 	/* set the context pointers queue object */
@@ -7209,7 +7213,7 @@ int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 
 	DP(BNX2X_MSG_SP, "preparing to send tx-only ramrod for connection:"
 			 "cos %d, primary cid %d, cid %d, "
-			 "client id %d, sp-client id %d, flags %lx",
+			 "client id %d, sp-client id %d, flags %lx\n",
 	   tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX],
 	   q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id,
 	   tx_only_params->gen_params.spcl_id, tx_only_params->flags);
@@ -7241,7 +7245,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	int rc;
 	u8 tx_index;
 
-	DP(BNX2X_MSG_SP, "setting up queue %d", fp->index);
+	DP(BNX2X_MSG_SP, "setting up queue %d\n", fp->index);
 
 	/* reset IGU state skip FCoE L2 queue */
 	if (!IS_FCOE_FP(fp))
@@ -7265,7 +7269,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		return rc;
 	}
 
-	DP(BNX2X_MSG_SP, "init complete");
+	DP(BNX2X_MSG_SP, "init complete\n");
 
 
 	/* Now move the Queue to the SETUP state... */
@@ -7319,7 +7323,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index)
 	struct bnx2x_queue_state_params q_params = {0};
 	int rc, tx_index;
 
-	DP(BNX2X_MSG_SP, "stopping queue %d cid %d", index, fp->cid);
+	DP(BNX2X_MSG_SP, "stopping queue %d cid %d\n", index, fp->cid);
 
 	q_params.q_obj = &fp->q_obj;
 	/* We want to wait for completion in this context */
@@ -7334,7 +7338,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index)
 		/* ascertain this is a normal queue*/
 		txdata = &fp->txdata[tx_index];
 
-		DP(BNX2X_MSG_SP, "stopping tx-only queue %d",
+		DP(BNX2X_MSG_SP, "stopping tx-only queue %d\n",
 							txdata->txq_index);
 
 		/* send halt terminate on tx-only connection */
@@ -9315,9 +9319,8 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
 				val = MF_CFG_RD(bp, func_ext_config[func].
 						    iscsi_mac_addr_lower);
 				bnx2x_set_mac_buf(iscsi_mac, val, val2);
-				BNX2X_DEV_INFO("Read iSCSI MAC: "
-					       BNX2X_MAC_FMT"\n",
-					       BNX2X_MAC_PRN_LIST(iscsi_mac));
+				BNX2X_DEV_INFO("Read iSCSI MAC: %pM\n",
+					       iscsi_mac);
 			} else
 				bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
 
@@ -9327,9 +9330,8 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
 				val = MF_CFG_RD(bp, func_ext_config[func].
 						    fcoe_mac_addr_lower);
 				bnx2x_set_mac_buf(fip_mac, val, val2);
-				BNX2X_DEV_INFO("Read FCoE L2 MAC to "
-					       BNX2X_MAC_FMT"\n",
-					       BNX2X_MAC_PRN_LIST(fip_mac));
+				BNX2X_DEV_INFO("Read FCoE L2 MAC to %pM\n",
+					       fip_mac);
 
 			} else
 				bp->flags |= NO_FCOE_FLAG;
@@ -9384,9 +9386,9 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
 	if (!is_valid_ether_addr(bp->dev->dev_addr))
 		dev_err(&bp->pdev->dev,
 			"bad Ethernet MAC address configuration: "
-			BNX2X_MAC_FMT", change it manually before bringing up "
+			"%pM, change it manually before bringing up "
 			"the appropriate network interface\n",
-			BNX2X_MAC_PRN_LIST(bp->dev->dev_addr));
+			bp->dev->dev_addr);
 }
 
 static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
@@ -10251,10 +10253,17 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	/* clean indirect addresses */
 	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
 			       PCICFG_VENDOR_ID_OFFSET);
-	REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(bp)*16, 0);
-	REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(bp)*16, 0);
-	REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0);
-	REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0);
+	/* Clean the following indirect addresses for all functions since it
+	 * is not used by the driver.
+	 */
+	REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
+	REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
 
 	/*
 	 * Enable internal target-read (in case we are probed after PF FLR).
@@ -10273,9 +10282,11 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	dev->netdev_ops = &bnx2x_netdev_ops;
 	bnx2x_set_ethtool_ops(dev);
 
+	dev->priv_flags |= IFF_UNICAST_FLT;
+
 	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
-		NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_HW_VLAN_TX;
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_LRO |
+		NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_HW_VLAN_TX;
 
 	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
@@ -10706,7 +10717,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 		return rc;
 	}
 
-	DP(NETIF_MSG_DRV, "max_non_def_sbs %d", max_non_def_sbs);
+	DP(NETIF_MSG_DRV, "max_non_def_sbs %d\n", max_non_def_sbs);
 
 	rc = bnx2x_init_bp(bp);
 	if (rc)
@@ -10761,15 +10772,14 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
 	bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
 
-	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx,"
-	       " IRQ %d, ", board_info[ent->driver_data].name,
-	       (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
-	       pcie_width,
-	       ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
-		 (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
-						"5GHz (Gen2)" : "2.5GHz",
-	       dev->base_addr, bp->pdev->irq);
-	pr_cont("node addr %pM\n", dev->dev_addr);
+	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+		    board_info[ent->driver_data].name,
+		    (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+		    pcie_width,
+		    ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
+		     (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
+		    "5GHz (Gen2)" : "2.5GHz",
+		    dev->base_addr, bp->pdev->irq, dev->dev_addr);
 
 	return 0;
 
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 02461fef8751..40266c14e6dc 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -3007,11 +3007,27 @@
 /* [R 6] Debug only: Number of used entries in the data FIFO */
 #define PXP2_REG_HST_DATA_FIFO_STATUS				 0x12047c
 /* [R 7] Debug only: Number of used entries in the header FIFO */
-#define PXP2_REG_HST_HEADER_FIFO_STATUS 			 0x120478
-#define PXP2_REG_PGL_ADDR_88_F0 				 0x120534
-#define PXP2_REG_PGL_ADDR_8C_F0 				 0x120538
-#define PXP2_REG_PGL_ADDR_90_F0 				 0x12053c
-#define PXP2_REG_PGL_ADDR_94_F0 				 0x120540
+#define PXP2_REG_HST_HEADER_FIFO_STATUS				 0x120478
+#define PXP2_REG_PGL_ADDR_88_F0					 0x120534
+/* [R 32] GRC address for configuration access to PCIE config address 0x88.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register */
+#define PXP2_REG_PGL_ADDR_88_F1					 0x120544
+#define PXP2_REG_PGL_ADDR_8C_F0					 0x120538
+/* [R 32] GRC address for configuration access to PCIE config address 0x8c.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register */
+#define PXP2_REG_PGL_ADDR_8C_F1					 0x120548
+#define PXP2_REG_PGL_ADDR_90_F0					 0x12053c
+/* [R 32] GRC address for configuration access to PCIE config address 0x90.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register */
+#define PXP2_REG_PGL_ADDR_90_F1					 0x12054c
+#define PXP2_REG_PGL_ADDR_94_F0					 0x120540
+/* [R 32] GRC address for configuration access to PCIE config address 0x94.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register */
+#define PXP2_REG_PGL_ADDR_94_F1					 0x120550
 #define PXP2_REG_PGL_CONTROL0					 0x120490
 #define PXP2_REG_PGL_CONTROL1					 0x120514
 #define PXP2_REG_PGL_DEBUG					 0x120520
@@ -4771,9 +4787,11 @@
    The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
    header pointer. */
 #define UCM_REG_XX_TABLE					 0xe0300
+#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE			 (0x1<<28)
 #define UMAC_COMMAND_CONFIG_REG_LOOP_ENA			 (0x1<<15)
 #define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK			 (0x1<<24)
 #define UMAC_COMMAND_CONFIG_REG_PAD_EN				 (0x1<<5)
+#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE			 (0x1<<8)
 #define UMAC_COMMAND_CONFIG_REG_PROMIS_EN			 (0x1<<4)
 #define UMAC_COMMAND_CONFIG_REG_RX_ENA				 (0x1<<1)
 #define UMAC_COMMAND_CONFIG_REG_SW_RESET			 (0x1<<13)
@@ -5622,8 +5640,9 @@
 #define EMAC_MDIO_COMM_START_BUSY				 (1L<<29)
 #define EMAC_MDIO_MODE_AUTO_POLL				 (1L<<4)
 #define EMAC_MDIO_MODE_CLAUSE_45				 (1L<<31)
-#define EMAC_MDIO_MODE_CLOCK_CNT				 (0x3fL<<16)
+#define EMAC_MDIO_MODE_CLOCK_CNT				 (0x3ffL<<16)
 #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT			 16
+#define EMAC_MDIO_STATUS_10MB					 (1L<<1)
 #define EMAC_MODE_25G_MODE					 (1L<<5)
 #define EMAC_MODE_HALF_DUPLEX					 (1L<<1)
 #define EMAC_MODE_PORT_GMII					 (2L<<2)
@@ -5634,6 +5653,7 @@
 #define EMAC_REG_EMAC_MAC_MATCH 				 0x10
 #define EMAC_REG_EMAC_MDIO_COMM 				 0xac
 #define EMAC_REG_EMAC_MDIO_MODE 				 0xb4
+#define EMAC_REG_EMAC_MDIO_STATUS				 0xb0
 #define EMAC_REG_EMAC_MODE					 0x0
 #define EMAC_REG_EMAC_RX_MODE					 0xc8
 #define EMAC_REG_EMAC_RX_MTU_SIZE				 0x9c
diff --git a/drivers/net/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index df52f110c6c5..0440425c83d6 100644
--- a/drivers/net/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -16,6 +16,9 @@
  * Written by: Vladislav Zolotarov
  *
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/crc32.h>
 #include <linux/netdevice.h>
@@ -707,9 +710,8 @@ static void bnx2x_set_one_mac_e2(struct bnx2x *bp,
 	bnx2x_vlan_mac_set_cmd_hdr_e2(bp, o, add, CLASSIFY_RULE_OPCODE_MAC,
 				      &rule_entry->mac.header);
 
-	DP(BNX2X_MSG_SP, "About to %s MAC "BNX2X_MAC_FMT" for "
-			 "Queue %d\n", (add ? "add" : "delete"),
-			 BNX2X_MAC_PRN_LIST(mac), raw->cl_id);
+	DP(BNX2X_MSG_SP, "About to %s MAC %pM for Queue %d\n",
+			 add ? "add" : "delete", mac, raw->cl_id);
 
 	/* Set a MAC itself */
 	bnx2x_set_fw_mac_addr(&rule_entry->mac.mac_msb,
@@ -801,9 +803,9 @@ static inline void bnx2x_vlan_mac_set_rdata_e1x(struct bnx2x *bp,
 	bnx2x_vlan_mac_set_cfg_entry_e1x(bp, o, add, opcode, mac, vlan_id,
 					 cfg_entry);
 
-	DP(BNX2X_MSG_SP, "%s MAC "BNX2X_MAC_FMT" CLID %d CAM offset %d\n",
-			 (add ? "setting" : "clearing"),
-			 BNX2X_MAC_PRN_LIST(mac), raw->cl_id, cam_offset);
+	DP(BNX2X_MSG_SP, "%s MAC %pM CLID %d CAM offset %d\n",
+			 add ? "setting" : "clearing",
+			 mac, raw->cl_id, cam_offset);
 }
 
 /**
@@ -2579,9 +2581,8 @@ static inline void bnx2x_mcast_hdl_pending_add_e2(struct bnx2x *bp,
 
 		cnt++;
 
-		DP(BNX2X_MSG_SP, "About to configure "BNX2X_MAC_FMT
-				 " mcast MAC\n",
-				 BNX2X_MAC_PRN_LIST(pmac_pos->mac));
+		DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n",
+				 pmac_pos->mac);
 
 		list_del(&pmac_pos->link);
 
@@ -2702,9 +2703,8 @@ static inline void bnx2x_mcast_hdl_add(struct bnx2x *bp,
 
 		cnt++;
 
-		DP(BNX2X_MSG_SP, "About to configure "BNX2X_MAC_FMT
-				 " mcast MAC\n",
-				 BNX2X_MAC_PRN_LIST(mlist_pos->mac));
+		DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n",
+				 mlist_pos->mac);
 	}
 
 	*line_idx = cnt;
@@ -2998,9 +2998,8 @@ static inline void bnx2x_mcast_hdl_add_e1h(struct bnx2x *bp,
 		bit = bnx2x_mcast_bin_from_mac(mlist_pos->mac);
 		BNX2X_57711_SET_MC_FILTER(mc_filter, bit);
 
-		DP(BNX2X_MSG_SP, "About to configure "
-				 BNX2X_MAC_FMT" mcast MAC, bin %d\n",
-				 BNX2X_MAC_PRN_LIST(mlist_pos->mac), bit);
+		DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC, bin %d\n",
+				 mlist_pos->mac, bit);
 
 		/* bookkeeping... */
 		BIT_VEC64_SET_BIT(o->registry.aprox_match.vec,
@@ -3049,8 +3048,8 @@ static int bnx2x_mcast_setup_e1h(struct bnx2x *bp,
 			break;
 
 		case BNX2X_MCAST_CMD_DEL:
-			DP(BNX2X_MSG_SP, "Invalidating multicast "
-					 "MACs configuration\n");
+			DP(BNX2X_MSG_SP,
+			   "Invalidating multicast MACs configuration\n");
 
 			/* clear the registry */
 			memset(o->registry.aprox_match.vec, 0,
@@ -3233,9 +3232,8 @@ static inline int bnx2x_mcast_handle_restore_cmd_e1(
 
 		i++;
 
-		  DP(BNX2X_MSG_SP, "About to configure "BNX2X_MAC_FMT
-				   " mcast MAC\n",
-				   BNX2X_MAC_PRN_LIST(cfg_data.mac));
+		  DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n",
+				   cfg_data.mac);
 	}
 
 	*rdata_idx = i;
@@ -3270,9 +3268,8 @@ static inline int bnx2x_mcast_handle_pending_cmds_e1(
 
 			cnt++;
 
-			DP(BNX2X_MSG_SP, "About to configure "BNX2X_MAC_FMT
-					 " mcast MAC\n",
-					 BNX2X_MAC_PRN_LIST(pmac_pos->mac));
+			DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n",
+					 pmac_pos->mac);
 		}
 		break;
 
@@ -3357,9 +3354,8 @@ static inline int bnx2x_mcast_refresh_registry_e1(struct bnx2x *bp,
 				&data->config_table[i].middle_mac_addr,
 				&data->config_table[i].lsb_mac_addr,
 				elem->mac);
-			DP(BNX2X_MSG_SP, "Adding registry entry for ["
-					 BNX2X_MAC_FMT"]\n",
-				   BNX2X_MAC_PRN_LIST(elem->mac));
+			DP(BNX2X_MSG_SP, "Adding registry entry for [%pM]\n",
+					 elem->mac);
 			list_add_tail(&elem->link,
 				      &o->registry.exact_match.macs);
 		}
@@ -4246,7 +4242,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
 			 o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_state);
 
 	if (o->next_tx_only)  /* print num tx-only if any exist */
-		DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d",
+		DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d\n",
 			   o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_tx_only);
 
 	o->state = o->next_state;
@@ -4308,7 +4304,7 @@ static void bnx2x_q_fill_init_general_data(struct bnx2x *bp,
 		test_bit(BNX2X_Q_FLG_FCOE, flags) ?
 		LLFC_TRAFFIC_TYPE_FCOE : LLFC_TRAFFIC_TYPE_NW;
 
-	DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d",
+	DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d\n",
 	   gen_data->activate_flg, gen_data->cos, gen_data->statistics_en_flg);
 }
 
@@ -4461,7 +4457,7 @@ static void bnx2x_q_fill_setup_tx_only(struct bnx2x *bp,
 				  &data->tx,
 				  &cmd_params->params.tx_only.flags);
 
-	DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x",cmd_params->q_obj->cids[0],
+	DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x\n",cmd_params->q_obj->cids[0],
 	   data->tx.tx_bd_page_base.lo, data->tx.tx_bd_page_base.hi);
 }
 
@@ -4508,9 +4504,9 @@ static inline int bnx2x_q_init(struct bnx2x *bp,
 
 	/* Set CDU context validation values */
 	for (cos = 0; cos < o->max_cos; cos++) {
-		DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d",
+		DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d\n",
 				 o->cids[cos], cos);
-		DP(BNX2X_MSG_SP, "context pointer %p", init->cxts[cos]);
+		DP(BNX2X_MSG_SP, "context pointer %p\n", init->cxts[cos]);
 		bnx2x_set_ctx_validation(bp, init->cxts[cos], o->cids[cos]);
 	}
 
@@ -4599,7 +4595,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
 		return -EINVAL;
 	}
 
-	DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d",
+	DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d\n",
 			 tx_only_params->gen_params.cos,
 			 tx_only_params->gen_params.spcl_id);
 
@@ -4610,7 +4606,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
 	bnx2x_q_fill_setup_tx_only(bp, params, rdata);
 
 	DP(BNX2X_MSG_SP, "sending tx-only ramrod: cid %d, client-id %d,"
-			 "sp-client id %d, cos %d",
+			 "sp-client id %d, cos %d\n",
 			 o->cids[cid_index],
 			 rdata->general.client_id,
 			 rdata->general.sp_client_id, rdata->general.cos);
@@ -5167,8 +5163,9 @@ static inline int bnx2x_func_state_change_comp(struct bnx2x *bp,
 		return -EINVAL;
 	}
 
-	DP(BNX2X_MSG_SP, "Completing command %d for func %d, setting state to "
-			 "%d\n", cmd, BP_FUNC(bp), o->next_state);
+	DP(BNX2X_MSG_SP,
+	   "Completing command %d for func %d, setting state to %d\n",
+	   cmd, BP_FUNC(bp), o->next_state);
 
 	o->state = o->next_state;
 	o->next_state = BNX2X_F_STATE_MAX;
diff --git a/drivers/net/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 9a517c2e9f1b..9a517c2e9f1b 100644
--- a/drivers/net/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
index 771f6803b238..628f7b99614f 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
@@ -14,6 +14,9 @@
  * Statistics and Link management by Yitchak Gertner
  *
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "bnx2x_stats.h"
 #include "bnx2x_cmn.h"
 
@@ -1194,14 +1197,13 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 			struct bnx2x_fastpath *fp = &bp->fp[i];
 			struct bnx2x_eth_q_stats *qstats = &fp->eth_q_stats;
 
-			printk(KERN_DEBUG "%s: rx usage(%4u)  *rx_cons_sb(%u)"
-					  "  rx pkt(%lu)  rx calls(%lu %lu)\n",
-			       fp->name, (le16_to_cpu(*fp->rx_cons_sb) -
-			       fp->rx_comp_cons),
-			       le16_to_cpu(*fp->rx_cons_sb),
-			       bnx2x_hilo(&qstats->
-					  total_unicast_packets_received_hi),
-			       fp->rx_calls, fp->rx_pkt);
+			pr_debug("%s: rx usage(%4u)  *rx_cons_sb(%u)  rx pkt(%lu)  rx calls(%lu %lu)\n",
+				 fp->name, (le16_to_cpu(*fp->rx_cons_sb) -
+					    fp->rx_comp_cons),
+				 le16_to_cpu(*fp->rx_cons_sb),
+				 bnx2x_hilo(&qstats->
+					    total_unicast_packets_received_hi),
+				 fp->rx_calls, fp->rx_pkt);
 		}
 
 		for_each_eth_queue(bp, i) {
@@ -1210,27 +1212,25 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 			struct bnx2x_eth_q_stats *qstats = &fp->eth_q_stats;
 			struct netdev_queue *txq;
 
-			printk(KERN_DEBUG "%s: tx pkt(%lu) (Xoff events %u)",
-				fp->name, bnx2x_hilo(
-				&qstats->total_unicast_packets_transmitted_hi),
-				qstats->driver_xoff);
+			pr_debug("%s: tx pkt(%lu) (Xoff events %u)",
+				 fp->name,
+				 bnx2x_hilo(
+					 &qstats->total_unicast_packets_transmitted_hi),
+				 qstats->driver_xoff);
 
 			for_each_cos_in_tx_queue(fp, cos) {
 				txdata = &fp->txdata[cos];
 				txq = netdev_get_tx_queue(bp->dev,
 						FP_COS_TO_TXQ(fp, cos));
 
-				printk(KERN_DEBUG "%d: tx avail(%4u)"
-				       "  *tx_cons_sb(%u)"
-				       "  tx calls (%lu)"
-				       "  %s\n",
-				       cos,
-				       bnx2x_tx_avail(bp, txdata),
-				       le16_to_cpu(*txdata->tx_cons_sb),
-				       txdata->tx_pkt,
-				       (netif_tx_queue_stopped(txq) ?
-					"Xoff" : "Xon")
-				       );
+				pr_debug("%d: tx avail(%4u)  *tx_cons_sb(%u)  tx calls (%lu)  %s\n",
+					 cos,
+					 bnx2x_tx_avail(bp, txdata),
+					 le16_to_cpu(*txdata->tx_cons_sb),
+					 txdata->tx_pkt,
+					 (netif_tx_queue_stopped(txq) ?
+					  "Xoff" : "Xon")
+					);
 			}
 		}
 	}
diff --git a/drivers/net/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
index 5d8ce2f6afef..5d8ce2f6afef 100644
--- a/drivers/net/bnx2x/bnx2x_stats.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
diff --git a/drivers/net/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index 94a2e541006d..6f10c6939834 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -45,8 +45,8 @@
 #include "bnx2x/bnx2x_reg.h"
 #include "bnx2x/bnx2x_fw_defs.h"
 #include "bnx2x/bnx2x_hsi.h"
-#include "../scsi/bnx2i/57xx_iscsi_constants.h"
-#include "../scsi/bnx2i/57xx_iscsi_hsi.h"
+#include "../../../scsi/bnx2i/57xx_iscsi_constants.h"
+#include "../../../scsi/bnx2i/57xx_iscsi_hsi.h"
 #include "cnic.h"
 #include "cnic_defs.h"
 
@@ -1177,7 +1177,7 @@ static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
 	cp->fcoe_start_cid = start_cid + MAX_ISCSI_TBL_SZ;
 
 	if (BNX2X_CHIP_IS_E2_PLUS(cp->chip_id)) {
-		cp->max_cid_space += BNX2X_FCOE_NUM_CONNECTIONS;
+		cp->max_cid_space += dev->max_fcoe_conn;
 		cp->fcoe_init_cid = ethdev->fcoe_init_cid;
 		if (!cp->fcoe_init_cid)
 			cp->fcoe_init_cid = 0x10;
@@ -1875,12 +1875,12 @@ static int cnic_bnx2x_destroy_ramrod(struct cnic_dev *dev, u32 l5_cid)
 				  hw_cid, NONE_CONNECTION_TYPE, &l5_data);
 
 	if (ret == 0) {
-		wait_event(ctx->waitq, ctx->wait_cond);
+		wait_event_timeout(ctx->waitq, ctx->wait_cond, CNIC_RAMROD_TMO);
 		if (unlikely(test_bit(CTX_FL_CID_ERROR, &ctx->ctx_flags)))
 			return -EBUSY;
 	}
 
-	return ret;
+	return 0;
 }
 
 static int cnic_bnx2x_iscsi_destroy(struct cnic_dev *dev, struct kwqe *kwqe)
@@ -2280,7 +2280,7 @@ static int cnic_bnx2x_fcoe_ofld1(struct cnic_dev *dev, struct kwqe *wqes[],
 	*work = 4;
 
 	l5_cid = req1->fcoe_conn_id;
-	if (l5_cid >= BNX2X_FCOE_NUM_CONNECTIONS)
+	if (l5_cid >= dev->max_fcoe_conn)
 		goto err_reply;
 
 	l5_cid += BNX2X_FCOE_L5_CID_BASE;
@@ -2384,7 +2384,7 @@ static int cnic_bnx2x_fcoe_disable(struct cnic_dev *dev, struct kwqe *kwqe)
 	req = (struct fcoe_kwqe_conn_enable_disable *) kwqe;
 	cid = req->context_id;
 	l5_cid = req->conn_id;
-	if (l5_cid >= BNX2X_FCOE_NUM_CONNECTIONS)
+	if (l5_cid >= dev->max_fcoe_conn)
 		return -EINVAL;
 
 	l5_cid += BNX2X_FCOE_L5_CID_BASE;
@@ -2418,7 +2418,7 @@ static int cnic_bnx2x_fcoe_destroy(struct cnic_dev *dev, struct kwqe *kwqe)
 	req = (struct fcoe_kwqe_conn_destroy *) kwqe;
 	cid = req->context_id;
 	l5_cid = req->conn_id;
-	if (l5_cid >= BNX2X_FCOE_NUM_CONNECTIONS)
+	if (l5_cid >= dev->max_fcoe_conn)
 		return -EINVAL;
 
 	l5_cid += BNX2X_FCOE_L5_CID_BASE;
@@ -2428,17 +2428,20 @@ static int cnic_bnx2x_fcoe_destroy(struct cnic_dev *dev, struct kwqe *kwqe)
 	init_waitqueue_head(&ctx->waitq);
 	ctx->wait_cond = 0;
 
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.completion_status = FCOE_KCQE_COMPLETION_STATUS_ERROR;
 	memset(&l5_data, 0, sizeof(l5_data));
 	ret = cnic_submit_kwqe_16(dev, FCOE_RAMROD_CMD_ID_TERMINATE_CONN, cid,
 				  FCOE_CONNECTION_TYPE, &l5_data);
 	if (ret == 0) {
-		wait_event(ctx->waitq, ctx->wait_cond);
-		set_bit(CTX_FL_DELETE_WAIT, &ctx->ctx_flags);
-		queue_delayed_work(cnic_wq, &cp->delete_task,
-				   msecs_to_jiffies(2000));
+		wait_event_timeout(ctx->waitq, ctx->wait_cond, CNIC_RAMROD_TMO);
+		if (ctx->wait_cond)
+			kcqe.completion_status = 0;
 	}
 
-	memset(&kcqe, 0, sizeof(kcqe));
+	set_bit(CTX_FL_DELETE_WAIT, &ctx->ctx_flags);
+	queue_delayed_work(cnic_wq, &cp->delete_task, msecs_to_jiffies(2000));
+
 	kcqe.op_code = FCOE_KCQE_OPCODE_DESTROY_CONN;
 	kcqe.fcoe_conn_id = req->conn_id;
 	kcqe.fcoe_conn_context_id = cid;
@@ -4850,8 +4853,7 @@ static int cnic_start_bnx2x_hw(struct cnic_dev *dev)
 		return -ENOMEM;
 
 	if (BNX2X_CHIP_IS_E2_PLUS(cp->chip_id)) {
-		ret = cnic_init_id_tbl(&cp->fcoe_cid_tbl,
-					BNX2X_FCOE_NUM_CONNECTIONS,
+		ret = cnic_init_id_tbl(&cp->fcoe_cid_tbl, dev->max_fcoe_conn,
 					cp->fcoe_start_cid, 0);
 
 		if (ret)
@@ -5292,6 +5294,9 @@ static struct cnic_dev *init_bnx2x_cnic(struct net_device *dev)
 	    !(ethdev->drv_state & CNIC_DRV_STATE_NO_FCOE))
 		cdev->max_fcoe_conn = ethdev->max_fcoe_conn;
 
+	if (cdev->max_fcoe_conn > BNX2X_FCOE_NUM_CONNECTIONS)
+		cdev->max_fcoe_conn = BNX2X_FCOE_NUM_CONNECTIONS;
+
 	memcpy(cdev->mac_addr, ethdev->iscsi_mac, 6);
 
 	cp->cnic_ops = &cnic_bnx2x_ops;
diff --git a/drivers/net/cnic.h b/drivers/net/ethernet/broadcom/cnic.h
index 7a2928f82d40..30328097f516 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/ethernet/broadcom/cnic.h
@@ -373,7 +373,7 @@ struct bnx2x_bd_chain_next {
 #define BNX2X_ISCSI_PBL_NOT_CACHED	0xff
 #define BNX2X_ISCSI_PDU_HEADER_NOT_CACHED	0xff
 
-#define BNX2X_FCOE_NUM_CONNECTIONS	128
+#define BNX2X_FCOE_NUM_CONNECTIONS	1024
 
 #define BNX2X_FCOE_L5_CID_BASE		MAX_ISCSI_TBL_SZ
 
@@ -474,5 +474,7 @@ struct bnx2x_bd_chain_next {
 	  MAX_STAT_COUNTER_ID_E1))
 #endif
 
+#define CNIC_RAMROD_TMO			(HZ / 4)
+
 #endif
 
diff --git a/drivers/net/cnic_defs.h b/drivers/net/ethernet/broadcom/cnic_defs.h
index e47d21076767..239de898f071 100644
--- a/drivers/net/cnic_defs.h
+++ b/drivers/net/ethernet/broadcom/cnic_defs.h
@@ -67,6 +67,7 @@
 #define FCOE_KWQE_OPCODE_DESTROY		(10)
 #define FCOE_KWQE_OPCODE_STAT			(11)
 
+#define FCOE_KCQE_COMPLETION_STATUS_ERROR	(0x1)
 #define FCOE_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE	(0x3)
 
 /* KCQ (kernel completion queue) response op codes */
diff --git a/drivers/net/cnic_if.h b/drivers/net/ethernet/broadcom/cnic_if.h
index 79443e0dbf96..79443e0dbf96 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/ethernet/broadcom/cnic_if.h
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
index ea65f7ec360a..0a1d7f279fc8 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
@@ -2176,7 +2176,7 @@ static const struct net_device_ops sbmac_netdev_ops = {
 	.ndo_open		= sbmac_open,
 	.ndo_stop		= sbmac_close,
 	.ndo_start_xmit		= sbmac_start_tx,
-	.ndo_set_multicast_list	= sbmac_set_rx_mode,
+	.ndo_set_rx_mode	= sbmac_set_rx_mode,
 	.ndo_tx_timeout		= sbmac_tx_timeout,
 	.ndo_do_ioctl		= sbmac_mii_ioctl,
 	.ndo_change_mtu		= sb1250_change_mtu,
diff --git a/drivers/net/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index dc3fbf61910b..a7e28a2c5348 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -89,12 +89,11 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits)
 
 #define DRV_MODULE_NAME		"tg3"
 #define TG3_MAJ_NUM			3
-#define TG3_MIN_NUM			119
+#define TG3_MIN_NUM			120
 #define DRV_MODULE_VERSION	\
 	__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE	"May 18, 2011"
+#define DRV_MODULE_RELDATE	"August 18, 2011"
 
-#define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
 #define TG3_DEF_TX_MODE		0
 #define TG3_DEF_MSG_ENABLE	  \
@@ -391,12 +390,14 @@ static const struct {
 static const struct {
 	const char string[ETH_GSTRING_LEN];
 } ethtool_test_keys[] = {
-	{ "nvram test     (online) " },
-	{ "link test      (online) " },
-	{ "register test  (offline)" },
-	{ "memory test    (offline)" },
-	{ "loopback test  (offline)" },
-	{ "interrupt test (offline)" },
+	{ "nvram test        (online) " },
+	{ "link test         (online) " },
+	{ "register test     (offline)" },
+	{ "memory test       (offline)" },
+	{ "mac loopback test (offline)" },
+	{ "phy loopback test (offline)" },
+	{ "ext loopback test (offline)" },
+	{ "interrupt test    (offline)" },
 };
 
 #define TG3_NUM_TEST	ARRAY_SIZE(ethtool_test_keys)
@@ -1680,6 +1681,36 @@ static void tg3_phy_fini(struct tg3 *tp)
 	}
 }
 
+static int tg3_phy_set_extloopbk(struct tg3 *tp)
+{
+	int err;
+	u32 val;
+
+	if (tp->phy_flags & TG3_PHYFLG_IS_FET)
+		return 0;
+
+	if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
+		/* Cannot do read-modify-write on 5401 */
+		err = tg3_phy_auxctl_write(tp,
+					   MII_TG3_AUXCTL_SHDWSEL_AUXCTL,
+					   MII_TG3_AUXCTL_ACTL_EXTLOOPBK |
+					   0x4c20);
+		goto done;
+	}
+
+	err = tg3_phy_auxctl_read(tp,
+				  MII_TG3_AUXCTL_SHDWSEL_AUXCTL, &val);
+	if (err)
+		return err;
+
+	val |= MII_TG3_AUXCTL_ACTL_EXTLOOPBK;
+	err = tg3_phy_auxctl_write(tp,
+				   MII_TG3_AUXCTL_SHDWSEL_AUXCTL, val);
+
+done:
+	return err;
+}
+
 static void tg3_phy_fet_toggle_apd(struct tg3 *tp, bool enable)
 {
 	u32 phytest;
@@ -6280,10 +6311,8 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 			len = frag->size;
-			mapping = pci_map_page(tp->pdev,
-					       frag->page,
-					       frag->page_offset,
-					       len, PCI_DMA_TODEVICE);
+			mapping = skb_frag_dma_map(&tp->pdev->dev, frag, 0,
+						   len, PCI_DMA_TODEVICE);
 
 			tnapi->tx_buffers[entry].skb = NULL;
 			dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping,
@@ -6343,6 +6372,127 @@ dma_error:
 	return NETDEV_TX_OK;
 }
 
+static void tg3_mac_loopback(struct tg3 *tp, bool enable)
+{
+	if (enable) {
+		tp->mac_mode &= ~(MAC_MODE_HALF_DUPLEX |
+				  MAC_MODE_PORT_MODE_MASK);
+
+		tp->mac_mode |= MAC_MODE_PORT_INT_LPBACK;
+
+		if (!tg3_flag(tp, 5705_PLUS))
+			tp->mac_mode |= MAC_MODE_LINK_POLARITY;
+
+		if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
+			tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
+		else
+			tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+	} else {
+		tp->mac_mode &= ~MAC_MODE_PORT_INT_LPBACK;
+
+		if (tg3_flag(tp, 5705_PLUS) ||
+		    (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
+			tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
+	}
+
+	tw32(MAC_MODE, tp->mac_mode);
+	udelay(40);
+}
+
+static int tg3_phy_lpbk_set(struct tg3 *tp, u32 speed, bool extlpbk)
+{
+	u32 val, bmcr, mac_mode, ptest = 0;
+
+	tg3_phy_toggle_apd(tp, false);
+	tg3_phy_toggle_automdix(tp, 0);
+
+	if (extlpbk && tg3_phy_set_extloopbk(tp))
+		return -EIO;
+
+	bmcr = BMCR_FULLDPLX;
+	switch (speed) {
+	case SPEED_10:
+		break;
+	case SPEED_100:
+		bmcr |= BMCR_SPEED100;
+		break;
+	case SPEED_1000:
+	default:
+		if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
+			speed = SPEED_100;
+			bmcr |= BMCR_SPEED100;
+		} else {
+			speed = SPEED_1000;
+			bmcr |= BMCR_SPEED1000;
+		}
+	}
+
+	if (extlpbk) {
+		if (!(tp->phy_flags & TG3_PHYFLG_IS_FET)) {
+			tg3_readphy(tp, MII_CTRL1000, &val);
+			val |= CTL1000_AS_MASTER |
+			       CTL1000_ENABLE_MASTER;
+			tg3_writephy(tp, MII_CTRL1000, val);
+		} else {
+			ptest = MII_TG3_FET_PTEST_TRIM_SEL |
+				MII_TG3_FET_PTEST_TRIM_2;
+			tg3_writephy(tp, MII_TG3_FET_PTEST, ptest);
+		}
+	} else
+		bmcr |= BMCR_LOOPBACK;
+
+	tg3_writephy(tp, MII_BMCR, bmcr);
+
+	/* The write needs to be flushed for the FETs */
+	if (tp->phy_flags & TG3_PHYFLG_IS_FET)
+		tg3_readphy(tp, MII_BMCR, &bmcr);
+
+	udelay(40);
+
+	if ((tp->phy_flags & TG3_PHYFLG_IS_FET) &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
+		tg3_writephy(tp, MII_TG3_FET_PTEST, ptest |
+			     MII_TG3_FET_PTEST_FRC_TX_LINK |
+			     MII_TG3_FET_PTEST_FRC_TX_LOCK);
+
+		/* The write needs to be flushed for the AC131 */
+		tg3_readphy(tp, MII_TG3_FET_PTEST, &val);
+	}
+
+	/* Reset to prevent losing 1st rx packet intermittently */
+	if ((tp->phy_flags & TG3_PHYFLG_MII_SERDES) &&
+	    tg3_flag(tp, 5780_CLASS)) {
+		tw32_f(MAC_RX_MODE, RX_MODE_RESET);
+		udelay(10);
+		tw32_f(MAC_RX_MODE, tp->rx_mode);
+	}
+
+	mac_mode = tp->mac_mode &
+		   ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
+	if (speed == SPEED_1000)
+		mac_mode |= MAC_MODE_PORT_MODE_GMII;
+	else
+		mac_mode |= MAC_MODE_PORT_MODE_MII;
+
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
+		u32 masked_phy_id = tp->phy_id & TG3_PHY_ID_MASK;
+
+		if (masked_phy_id == TG3_PHY_ID_BCM5401)
+			mac_mode &= ~MAC_MODE_LINK_POLARITY;
+		else if (masked_phy_id == TG3_PHY_ID_BCM5411)
+			mac_mode |= MAC_MODE_LINK_POLARITY;
+
+		tg3_writephy(tp, MII_TG3_EXT_CTRL,
+			     MII_TG3_EXT_CTRL_LNK3_LED_MODE);
+	}
+
+	tw32(MAC_MODE, mac_mode);
+	udelay(40);
+
+	return 0;
+}
+
 static void tg3_set_loopback(struct net_device *dev, u32 features)
 {
 	struct tg3 *tp = netdev_priv(dev);
@@ -6351,16 +6501,8 @@ static void tg3_set_loopback(struct net_device *dev, u32 features)
 		if (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK)
 			return;
 
-		/*
-		 * Clear MAC_MODE_HALF_DUPLEX or you won't get packets back in
-		 * loopback mode if Half-Duplex mode was negotiated earlier.
-		 */
-		tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
-
-		/* Enable internal MAC loopback mode */
-		tp->mac_mode |= MAC_MODE_PORT_INT_LPBACK;
 		spin_lock_bh(&tp->lock);
-		tw32(MAC_MODE, tp->mac_mode);
+		tg3_mac_loopback(tp, true);
 		netif_carrier_on(tp->dev);
 		spin_unlock_bh(&tp->lock);
 		netdev_info(dev, "Internal MAC loopback mode enabled.\n");
@@ -6368,10 +6510,8 @@ static void tg3_set_loopback(struct net_device *dev, u32 features)
 		if (!(tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
 			return;
 
-		/* Disable internal MAC loopback mode */
-		tp->mac_mode &= ~MAC_MODE_PORT_INT_LPBACK;
 		spin_lock_bh(&tp->lock);
-		tw32(MAC_MODE, tp->mac_mode);
+		tg3_mac_loopback(tp, false);
 		/* Force link status check */
 		tg3_setup_phy(tp, 1);
 		spin_unlock_bh(&tp->lock);
@@ -11219,10 +11359,6 @@ static int tg3_test_memory(struct tg3 *tp)
 	return err;
 }
 
-#define TG3_MAC_LOOPBACK	0
-#define TG3_PHY_LOOPBACK	1
-#define TG3_TSO_LOOPBACK	2
-
 #define TG3_TSO_MSS		500
 
 #define TG3_TSO_IP_HDR_LEN	20
@@ -11246,9 +11382,9 @@ static const u8 tg3_tso_header[] = {
 0x11, 0x11, 0x11, 0x11,
 };
 
-static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
+static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, bool tso_loopback)
 {
-	u32 mac_mode, rx_start_idx, rx_idx, tx_idx, opaque_key;
+	u32 rx_start_idx, rx_idx, tx_idx, opaque_key;
 	u32 base_flags = 0, mss = 0, desc_idx, coal_now, data_off, val;
 	u32 budget;
 	struct sk_buff *skb, *rx_skb;
@@ -11269,76 +11405,6 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
 	}
 	coal_now = tnapi->coal_now | rnapi->coal_now;
 
-	if (loopback_mode == TG3_MAC_LOOPBACK) {
-		/* HW errata - mac loopback fails in some cases on 5780.
-		 * Normal traffic and PHY loopback are not affected by
-		 * errata.  Also, the MAC loopback test is deprecated for
-		 * all newer ASIC revisions.
-		 */
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
-		    tg3_flag(tp, CPMU_PRESENT))
-			return 0;
-
-		mac_mode = tp->mac_mode &
-			   ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
-		mac_mode |= MAC_MODE_PORT_INT_LPBACK;
-		if (!tg3_flag(tp, 5705_PLUS))
-			mac_mode |= MAC_MODE_LINK_POLARITY;
-		if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
-			mac_mode |= MAC_MODE_PORT_MODE_MII;
-		else
-			mac_mode |= MAC_MODE_PORT_MODE_GMII;
-		tw32(MAC_MODE, mac_mode);
-	} else {
-		if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
-			tg3_phy_fet_toggle_apd(tp, false);
-			val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
-		} else
-			val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
-
-		tg3_phy_toggle_automdix(tp, 0);
-
-		tg3_writephy(tp, MII_BMCR, val);
-		udelay(40);
-
-		mac_mode = tp->mac_mode &
-			   ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
-		if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
-			tg3_writephy(tp, MII_TG3_FET_PTEST,
-				     MII_TG3_FET_PTEST_FRC_TX_LINK |
-				     MII_TG3_FET_PTEST_FRC_TX_LOCK);
-			/* The write needs to be flushed for the AC131 */
-			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
-				tg3_readphy(tp, MII_TG3_FET_PTEST, &val);
-			mac_mode |= MAC_MODE_PORT_MODE_MII;
-		} else
-			mac_mode |= MAC_MODE_PORT_MODE_GMII;
-
-		/* reset to prevent losing 1st rx packet intermittently */
-		if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) {
-			tw32_f(MAC_RX_MODE, RX_MODE_RESET);
-			udelay(10);
-			tw32_f(MAC_RX_MODE, tp->rx_mode);
-		}
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
-			u32 masked_phy_id = tp->phy_id & TG3_PHY_ID_MASK;
-			if (masked_phy_id == TG3_PHY_ID_BCM5401)
-				mac_mode &= ~MAC_MODE_LINK_POLARITY;
-			else if (masked_phy_id == TG3_PHY_ID_BCM5411)
-				mac_mode |= MAC_MODE_LINK_POLARITY;
-			tg3_writephy(tp, MII_TG3_EXT_CTRL,
-				     MII_TG3_EXT_CTRL_LNK3_LED_MODE);
-		}
-		tw32(MAC_MODE, mac_mode);
-
-		/* Wait for link */
-		for (i = 0; i < 100; i++) {
-			if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP)
-				break;
-			mdelay(1);
-		}
-	}
-
 	err = -EIO;
 
 	tx_len = pktsz;
@@ -11352,7 +11418,7 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
 
 	tw32(MAC_RX_MTU_SIZE, tx_len + ETH_FCS_LEN);
 
-	if (loopback_mode == TG3_TSO_LOOPBACK) {
+	if (tso_loopback) {
 		struct iphdr *iph = (struct iphdr *)&tx_data[ETH_HLEN];
 
 		u32 hdr_len = TG3_TSO_IP_HDR_LEN + TG3_TSO_TCP_HDR_LEN +
@@ -11472,7 +11538,7 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
 		rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT)
 			 - ETH_FCS_LEN;
 
-		if (loopback_mode != TG3_TSO_LOOPBACK) {
+		if (!tso_loopback) {
 			if (rx_len != tx_len)
 				goto out;
 
@@ -11519,25 +11585,33 @@ out:
 #define TG3_STD_LOOPBACK_FAILED		1
 #define TG3_JMB_LOOPBACK_FAILED		2
 #define TG3_TSO_LOOPBACK_FAILED		4
+#define TG3_LOOPBACK_FAILED \
+	(TG3_STD_LOOPBACK_FAILED | \
+	 TG3_JMB_LOOPBACK_FAILED | \
+	 TG3_TSO_LOOPBACK_FAILED)
 
-#define TG3_MAC_LOOPBACK_SHIFT		0
-#define TG3_PHY_LOOPBACK_SHIFT		4
-#define TG3_LOOPBACK_FAILED		0x00000077
-
-static int tg3_test_loopback(struct tg3 *tp)
+static int tg3_test_loopback(struct tg3 *tp, u64 *data, bool do_extlpbk)
 {
-	int err = 0;
-	u32 eee_cap, cpmuctrl = 0;
-
-	if (!netif_running(tp->dev))
-		return TG3_LOOPBACK_FAILED;
+	int err = -EIO;
+	u32 eee_cap;
 
 	eee_cap = tp->phy_flags & TG3_PHYFLG_EEE_CAP;
 	tp->phy_flags &= ~TG3_PHYFLG_EEE_CAP;
 
+	if (!netif_running(tp->dev)) {
+		data[0] = TG3_LOOPBACK_FAILED;
+		data[1] = TG3_LOOPBACK_FAILED;
+		if (do_extlpbk)
+			data[2] = TG3_LOOPBACK_FAILED;
+		goto done;
+	}
+
 	err = tg3_reset_hw(tp, 1);
 	if (err) {
-		err = TG3_LOOPBACK_FAILED;
+		data[0] = TG3_LOOPBACK_FAILED;
+		data[1] = TG3_LOOPBACK_FAILED;
+		if (do_extlpbk)
+			data[2] = TG3_LOOPBACK_FAILED;
 		goto done;
 	}
 
@@ -11550,68 +11624,72 @@ static int tg3_test_loopback(struct tg3 *tp)
 			tw32(i, 0x0);
 	}
 
-	/* Turn off gphy autopowerdown. */
-	if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
-		tg3_phy_toggle_apd(tp, false);
+	/* HW errata - mac loopback fails in some cases on 5780.
+	 * Normal traffic and PHY loopback are not affected by
+	 * errata.  Also, the MAC loopback test is deprecated for
+	 * all newer ASIC revisions.
+	 */
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780 &&
+	    !tg3_flag(tp, CPMU_PRESENT)) {
+		tg3_mac_loopback(tp, true);
 
-	if (tg3_flag(tp, CPMU_PRESENT)) {
+		if (tg3_run_loopback(tp, ETH_FRAME_LEN, false))
+			data[0] |= TG3_STD_LOOPBACK_FAILED;
+
+		if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
+		    tg3_run_loopback(tp, 9000 + ETH_HLEN, false))
+			data[0] |= TG3_JMB_LOOPBACK_FAILED;
+
+		tg3_mac_loopback(tp, false);
+	}
+
+	if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
+	    !tg3_flag(tp, USE_PHYLIB)) {
 		int i;
-		u32 status;
 
-		tw32(TG3_CPMU_MUTEX_REQ, CPMU_MUTEX_REQ_DRIVER);
+		tg3_phy_lpbk_set(tp, 0, false);
 
-		/* Wait for up to 40 microseconds to acquire lock. */
-		for (i = 0; i < 4; i++) {
-			status = tr32(TG3_CPMU_MUTEX_GNT);
-			if (status == CPMU_MUTEX_GNT_DRIVER)
+		/* Wait for link */
+		for (i = 0; i < 100; i++) {
+			if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP)
 				break;
-			udelay(10);
-		}
-
-		if (status != CPMU_MUTEX_GNT_DRIVER) {
-			err = TG3_LOOPBACK_FAILED;
-			goto done;
+			mdelay(1);
 		}
 
-		/* Turn off link-based power management. */
-		cpmuctrl = tr32(TG3_CPMU_CTRL);
-		tw32(TG3_CPMU_CTRL,
-		     cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
-				  CPMU_CTRL_LINK_AWARE_MODE));
-	}
-
-	if (tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_MAC_LOOPBACK))
-		err |= TG3_STD_LOOPBACK_FAILED << TG3_MAC_LOOPBACK_SHIFT;
+		if (tg3_run_loopback(tp, ETH_FRAME_LEN, false))
+			data[1] |= TG3_STD_LOOPBACK_FAILED;
+		if (tg3_flag(tp, TSO_CAPABLE) &&
+		    tg3_run_loopback(tp, ETH_FRAME_LEN, true))
+			data[1] |= TG3_TSO_LOOPBACK_FAILED;
+		if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
+		    tg3_run_loopback(tp, 9000 + ETH_HLEN, false))
+			data[1] |= TG3_JMB_LOOPBACK_FAILED;
 
-	if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
-	    tg3_run_loopback(tp, 9000 + ETH_HLEN, TG3_MAC_LOOPBACK))
-		err |= TG3_JMB_LOOPBACK_FAILED << TG3_MAC_LOOPBACK_SHIFT;
+		if (do_extlpbk) {
+			tg3_phy_lpbk_set(tp, 0, true);
 
-	if (tg3_flag(tp, CPMU_PRESENT)) {
-		tw32(TG3_CPMU_CTRL, cpmuctrl);
+			/* All link indications report up, but the hardware
+			 * isn't really ready for about 20 msec.  Double it
+			 * to be sure.
+			 */
+			mdelay(40);
 
-		/* Release the mutex */
-		tw32(TG3_CPMU_MUTEX_GNT, CPMU_MUTEX_GNT_DRIVER);
-	}
+			if (tg3_run_loopback(tp, ETH_FRAME_LEN, false))
+				data[2] |= TG3_STD_LOOPBACK_FAILED;
+			if (tg3_flag(tp, TSO_CAPABLE) &&
+			    tg3_run_loopback(tp, ETH_FRAME_LEN, true))
+				data[2] |= TG3_TSO_LOOPBACK_FAILED;
+			if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
+			    tg3_run_loopback(tp, 9000 + ETH_HLEN, false))
+				data[2] |= TG3_JMB_LOOPBACK_FAILED;
+		}
 
-	if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
-	    !tg3_flag(tp, USE_PHYLIB)) {
-		if (tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_PHY_LOOPBACK))
-			err |= TG3_STD_LOOPBACK_FAILED <<
-			       TG3_PHY_LOOPBACK_SHIFT;
-		if (tg3_flag(tp, TSO_CAPABLE) &&
-		    tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_TSO_LOOPBACK))
-			err |= TG3_TSO_LOOPBACK_FAILED <<
-			       TG3_PHY_LOOPBACK_SHIFT;
-		if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
-		    tg3_run_loopback(tp, 9000 + ETH_HLEN, TG3_PHY_LOOPBACK))
-			err |= TG3_JMB_LOOPBACK_FAILED <<
-			       TG3_PHY_LOOPBACK_SHIFT;
+		/* Re-enable gphy autopowerdown. */
+		if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
+			tg3_phy_toggle_apd(tp, true);
 	}
 
-	/* Re-enable gphy autopowerdown. */
-	if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
-		tg3_phy_toggle_apd(tp, true);
+	err = (data[0] | data[1] | data[2]) ? -EIO : 0;
 
 done:
 	tp->phy_flags |= eee_cap;
@@ -11623,6 +11701,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 			  u64 *data)
 {
 	struct tg3 *tp = netdev_priv(dev);
+	bool doextlpbk = etest->flags & ETH_TEST_FL_EXTERNAL_LB;
 
 	if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) &&
 	    tg3_power_up(tp)) {
@@ -11637,7 +11716,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 		etest->flags |= ETH_TEST_FL_FAILED;
 		data[0] = 1;
 	}
-	if (tg3_test_link(tp) != 0) {
+	if (!doextlpbk && tg3_test_link(tp)) {
 		etest->flags |= ETH_TEST_FL_FAILED;
 		data[1] = 1;
 	}
@@ -11667,18 +11746,23 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 			etest->flags |= ETH_TEST_FL_FAILED;
 			data[2] = 1;
 		}
+
 		if (tg3_test_memory(tp) != 0) {
 			etest->flags |= ETH_TEST_FL_FAILED;
 			data[3] = 1;
 		}
-		if ((data[4] = tg3_test_loopback(tp)) != 0)
+
+		if (doextlpbk)
+			etest->flags |= ETH_TEST_FL_EXTERNAL_LB_DONE;
+
+		if (tg3_test_loopback(tp, &data[4], doextlpbk))
 			etest->flags |= ETH_TEST_FL_FAILED;
 
 		tg3_full_unlock(tp);
 
 		if (tg3_test_interrupt(tp) != 0) {
 			etest->flags |= ETH_TEST_FL_FAILED;
-			data[5] = 1;
+			data[7] = 1;
 		}
 
 		tg3_full_lock(tp, 0);
@@ -14368,7 +14452,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tg3_flag(tp, ENABLE_APE))
 		tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
 	else
-		tp->mac_mode = TG3_DEF_MAC_MODE;
+		tp->mac_mode = 0;
 
 	/* these are limited to 10/100 only */
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
@@ -15177,7 +15261,7 @@ static const struct net_device_ops tg3_netdev_ops = {
 	.ndo_start_xmit		= tg3_start_xmit,
 	.ndo_get_stats64	= tg3_get_stats64,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= tg3_set_rx_mode,
+	.ndo_set_rx_mode	= tg3_set_rx_mode,
 	.ndo_set_mac_address	= tg3_set_mac_addr,
 	.ndo_do_ioctl		= tg3_ioctl,
 	.ndo_tx_timeout		= tg3_tx_timeout,
diff --git a/drivers/net/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index 2ea456dd5880..d2976f39b2fc 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -2197,6 +2197,7 @@
 #define MII_TG3_AUXCTL_ACTL_TX_6DB	0x0400
 #define MII_TG3_AUXCTL_ACTL_SMDSP_ENA	0x0800
 #define MII_TG3_AUXCTL_ACTL_EXTPKTLEN	0x4000
+#define MII_TG3_AUXCTL_ACTL_EXTLOOPBK	0x8000
 
 #define MII_TG3_AUXCTL_SHDWSEL_PWRCTL	0x0002
 #define MII_TG3_AUXCTL_PCTL_WOL_EN	0x0008
@@ -2262,6 +2263,8 @@
 
 /* Fast Ethernet Tranceiver definitions */
 #define MII_TG3_FET_PTEST		0x17
+#define  MII_TG3_FET_PTEST_TRIM_SEL	0x0010
+#define  MII_TG3_FET_PTEST_TRIM_2	0x0002
 #define  MII_TG3_FET_PTEST_FRC_TX_LINK	0x1000
 #define  MII_TG3_FET_PTEST_FRC_TX_LOCK	0x0800
 
diff --git a/drivers/net/ethernet/brocade/Kconfig b/drivers/net/ethernet/brocade/Kconfig
new file mode 100644
index 000000000000..264155778857
--- /dev/null
+++ b/drivers/net/ethernet/brocade/Kconfig
@@ -0,0 +1,23 @@
+#
+# Brocade device configuration
+#
+
+config NET_VENDOR_BROCADE
+	bool "Brocade devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Brocade cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_BROCADE
+
+source "drivers/net/ethernet/brocade/bna/Kconfig"
+
+endif # NET_VENDOR_BROCADE
diff --git a/drivers/net/ethernet/brocade/Makefile b/drivers/net/ethernet/brocade/Makefile
new file mode 100644
index 000000000000..b58238d2df6a
--- /dev/null
+++ b/drivers/net/ethernet/brocade/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Brocade device drivers.
+#
+
+obj-$(CONFIG_BNA) += bna/
diff --git a/drivers/net/ethernet/brocade/bna/Kconfig b/drivers/net/ethernet/brocade/bna/Kconfig
new file mode 100644
index 000000000000..dc2eb526fbf7
--- /dev/null
+++ b/drivers/net/ethernet/brocade/bna/Kconfig
@@ -0,0 +1,17 @@
+#
+# Brocade network device configuration
+#
+
+config BNA
+	tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
+	depends on PCI
+	---help---
+	  This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
+	  cards.
+	  To compile this driver as a module, choose M here: the module
+	  will be called bna.
+
+	  For general information and support, go to the Brocade support
+	  website at:
+
+	  <http://support.brocade.com>
diff --git a/drivers/net/bna/Makefile b/drivers/net/ethernet/brocade/bna/Makefile
index a5d604de7fea..74d3abca1960 100644
--- a/drivers/net/bna/Makefile
+++ b/drivers/net/ethernet/brocade/bna/Makefile
@@ -5,7 +5,8 @@
 
 obj-$(CONFIG_BNA) += bna.o
 
-bna-objs := bnad.o bnad_ethtool.o bna_ctrl.o bna_txrx.o
-bna-objs += bfa_ioc.o bfa_ioc_ct.o bfa_cee.o cna_fwimg.o
+bna-objs := bnad.o bnad_ethtool.o bna_enet.o bna_tx_rx.o
+bna-objs += bfa_msgq.o bfa_ioc.o bfa_ioc_ct.o bfa_cee.o
+bna-objs += cna_fwimg.o
 
 EXTRA_CFLAGS := -Idrivers/net/bna
diff --git a/drivers/net/bna/bfa_cee.c b/drivers/net/ethernet/brocade/bna/bfa_cee.c
index 39e5ab9fde59..b45b8eb3b9b0 100644
--- a/drivers/net/bna/bfa_cee.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_cee.c
@@ -22,9 +22,6 @@
 #include "bfi_cna.h"
 #include "bfa_ioc.h"
 
-#define bfa_ioc_portid(__ioc) ((__ioc)->port_id)
-#define bfa_lpuid(__arg) bfa_ioc_portid(&(__arg)->ioc)
-
 static void bfa_cee_format_lldp_cfg(struct bfa_cee_lldp_cfg *lldp_cfg);
 static void bfa_cee_format_cee_cfg(void *buffer);
 
diff --git a/drivers/net/bna/bfa_cee.h b/drivers/net/ethernet/brocade/bna/bfa_cee.h
index 58d54e98d595..58d54e98d595 100644
--- a/drivers/net/bna/bfa_cee.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_cee.h
diff --git a/drivers/net/bna/bfa_cs.h b/drivers/net/ethernet/brocade/bna/bfa_cs.h
index 3da1a946ccdd..3da1a946ccdd 100644
--- a/drivers/net/bna/bfa_cs.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_cs.h
diff --git a/drivers/net/bna/bfa_defs.h b/drivers/net/ethernet/brocade/bna/bfa_defs.h
index b080b3698f48..205b92b3709c 100644
--- a/drivers/net/bna/bfa_defs.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs.h
@@ -124,6 +124,7 @@ enum bfa_ioc_state {
 	BFA_IOC_DISABLED	= 10,	/*!< IOC is disabled */
 	BFA_IOC_FWMISMATCH	= 11,	/*!< IOC f/w different from drivers */
 	BFA_IOC_ENABLING	= 12,	/*!< IOC is being enabled */
+	BFA_IOC_HWFAIL		= 13,	/*!< PCI mapping doesn't exist */
 };
 
 /**
@@ -179,8 +180,19 @@ struct bfa_ioc_attr {
 	struct bfa_adapter_attr adapter_attr;	/*!< HBA attributes */
 	struct bfa_ioc_driver_attr driver_attr;	/*!< driver attr    */
 	struct bfa_ioc_pci_attr pci_attr;
-	u8				port_id;	/*!< port number    */
-	u8				rsvd[7];	/*!< 64bit align    */
+	u8				port_id;	/*!< port number */
+	u8				port_mode;	/*!< enum bfa_mode */
+	u8				cap_bm;		/*!< capability */
+	u8				port_mode_cfg;	/*!< enum bfa_mode */
+	u8				rsvd[4];	/*!< 64bit align */
+};
+
+/**
+ * Adapter capability mask definition
+ */
+enum {
+	BFA_CM_HBA	=	0x01,
+	BFA_CM_CNA	=	0x02,
 };
 
 /**
@@ -228,7 +240,7 @@ struct bfa_mfg_block {
 	mac_t		mfg_mac;	/*!< mac address */
 	u8		num_mac;	/*!< number of mac addresses */
 	u8		rsv2;
-	u32	mfg_type;	/*!< card type */
+	u32		card_type;	/*!< card type */
 	u8		rsv3[108];
 	u8		md5_chksum[BFA_MFG_CHKSUM_SIZE]; /*!< md5 checksum */
 };
@@ -242,5 +254,12 @@ struct bfa_mfg_block {
 #define bfa_asic_id_ct(devid)			\
 	((devid) == PCI_DEVICE_ID_BROCADE_CT ||	\
 	(devid) == PCI_DEVICE_ID_BROCADE_CT_FC)
+#define bfa_asic_id_ctc(devid) (bfa_asic_id_ct(devid))
+
+enum bfa_mode {
+	BFA_MODE_HBA		= 1,
+	BFA_MODE_CNA		= 2,
+	BFA_MODE_NIC		= 3
+};
 
 #endif /* __BFA_DEFS_H__ */
diff --git a/drivers/net/bna/bfa_defs_cna.h b/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h
index 7e0a9187bdd5..7e0a9187bdd5 100644
--- a/drivers/net/bna/bfa_defs_cna.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h
diff --git a/drivers/net/bna/bfa_defs_mfg_comm.h b/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
index 885ef3afdd4e..7ddd16f819f9 100644
--- a/drivers/net/bna/bfa_defs_mfg_comm.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
@@ -19,11 +19,12 @@
 #define __BFA_DEFS_MFG_COMM_H__
 
 #include "cna.h"
+#include "bfa_defs.h"
 
 /**
  * Manufacturing block version
  */
-#define BFA_MFG_VERSION				2
+#define BFA_MFG_VERSION				3
 #define BFA_MFG_VERSION_UNINIT			0xFF
 
 /**
@@ -66,14 +67,6 @@ enum {
 #pragma pack(1)
 
 /**
- * Check if 1-port card
- */
-#define bfa_mfg_is_1port(type) (( \
-	(type) == BFA_MFG_TYPE_FC8P1 || \
-	(type) == BFA_MFG_TYPE_FC4P1 || \
-	(type) == BFA_MFG_TYPE_CNA10P1))
-
-/**
  * Check if Mezz card
  */
 #define bfa_mfg_is_mezz(type) (( \
@@ -95,27 +88,14 @@ enum {
 	(type) == BFA_MFG_TYPE_CNA10P1 || \
 	bfa_mfg_is_mezz(type)))
 
-#define bfa_mfg_adapter_prop_init_flash(card_type, prop)	\
+#define bfa_mfg_adapter_prop_init_flash_ct(mfgblk, prop)	\
 do {								\
-	switch ((card_type)) {					\
-	case BFA_MFG_TYPE_FC8P2:				\
+	switch ((mfgblk)->card_type) {				\
 	case BFA_MFG_TYPE_JAYHAWK:				\
 	case BFA_MFG_TYPE_ASTRA:				\
 		(prop) = BFI_ADAPTER_SETP(NPORTS, 2) |		\
 			BFI_ADAPTER_SETP(SPEED, 8);		\
 		break;						\
-	case BFA_MFG_TYPE_FC8P1:				\
-		(prop) = BFI_ADAPTER_SETP(NPORTS, 1) |		\
-			BFI_ADAPTER_SETP(SPEED, 8);		\
-		break;						\
-	case BFA_MFG_TYPE_FC4P2:				\
-		(prop) = BFI_ADAPTER_SETP(NPORTS, 2) |		\
-			BFI_ADAPTER_SETP(SPEED, 4);		\
-		break;						\
-	case BFA_MFG_TYPE_FC4P1:				\
-		(prop) = BFI_ADAPTER_SETP(NPORTS, 1) |		\
-			BFI_ADAPTER_SETP(SPEED, 4);		\
-		break;						\
 	case BFA_MFG_TYPE_CNA10P2:				\
 	case BFA_MFG_TYPE_WANCHESE:				\
 	case BFA_MFG_TYPE_LIGHTNING_P0:				\
diff --git a/drivers/net/bna/bfa_defs_status.h b/drivers/net/ethernet/brocade/bna/bfa_defs_status.h
index 7c5fe6c2e80e..7c5fe6c2e80e 100644
--- a/drivers/net/bna/bfa_defs_status.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_status.h
diff --git a/drivers/net/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 126b0aac9f94..029fb527e80d 100644
--- a/drivers/net/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -19,7 +19,7 @@
 #include "bfa_ioc.h"
 #include "cna.h"
 #include "bfi.h"
-#include "bfi_ctreg.h"
+#include "bfi_reg.h"
 #include "bfa_defs.h"
 
 /**
@@ -62,6 +62,7 @@ static void bfa_ioc_hw_sem_init(struct bfa_ioc *ioc);
 static void bfa_ioc_hw_sem_get(struct bfa_ioc *ioc);
 static void bfa_ioc_hw_sem_get_cancel(struct bfa_ioc *ioc);
 static void bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force);
+static void bfa_ioc_poll_fwinit(struct bfa_ioc *ioc);
 static void bfa_ioc_send_enable(struct bfa_ioc *ioc);
 static void bfa_ioc_send_disable(struct bfa_ioc *ioc);
 static void bfa_ioc_send_getattr(struct bfa_ioc *ioc);
@@ -78,8 +79,8 @@ static void bfa_ioc_lpu_stop(struct bfa_ioc *ioc);
 static void bfa_ioc_fail_notify(struct bfa_ioc *ioc);
 static void bfa_ioc_pf_enabled(struct bfa_ioc *ioc);
 static void bfa_ioc_pf_disabled(struct bfa_ioc *ioc);
-static void bfa_ioc_pf_initfailed(struct bfa_ioc *ioc);
 static void bfa_ioc_pf_failed(struct bfa_ioc *ioc);
+static void bfa_ioc_pf_hwfailed(struct bfa_ioc *ioc);
 static void bfa_ioc_pf_fwmismatch(struct bfa_ioc *ioc);
 static void bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type,
 			 u32 boot_param);
@@ -108,11 +109,11 @@ enum ioc_event {
 	IOC_E_ENABLED		= 5,	/*!< f/w enabled		*/
 	IOC_E_FWRSP_GETATTR	= 6,	/*!< IOC get attribute response	*/
 	IOC_E_DISABLED		= 7,	/*!< f/w disabled		*/
-	IOC_E_INITFAILED	= 8,	/*!< failure notice by iocpf sm	*/
-	IOC_E_PFFAILED		= 9,	/*!< failure notice by iocpf sm	*/
-	IOC_E_HBFAIL		= 10,	/*!< heartbeat failure		*/
-	IOC_E_HWERROR		= 11,	/*!< hardware error interrupt	*/
-	IOC_E_TIMEOUT		= 12,	/*!< timeout			*/
+	IOC_E_PFFAILED		= 8,	/*!< failure notice by iocpf sm	*/
+	IOC_E_HBFAIL		= 9,	/*!< heartbeat failure		*/
+	IOC_E_HWERROR		= 10,	/*!< hardware error interrupt	*/
+	IOC_E_TIMEOUT		= 11,	/*!< timeout			*/
+	IOC_E_HWFAILED		= 12,	/*!< PCI mapping failure notice	*/
 };
 
 bfa_fsm_state_decl(bfa_ioc, uninit, struct bfa_ioc, enum ioc_event);
@@ -124,6 +125,7 @@ bfa_fsm_state_decl(bfa_ioc, fail_retry, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, fail, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, disabling, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, disabled, struct bfa_ioc, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, hwfail, struct bfa_ioc, enum ioc_event);
 
 static struct bfa_sm_table ioc_sm_table[] = {
 	{BFA_SM(bfa_ioc_sm_uninit), BFA_IOC_UNINIT},
@@ -135,6 +137,7 @@ static struct bfa_sm_table ioc_sm_table[] = {
 	{BFA_SM(bfa_ioc_sm_fail), BFA_IOC_FAIL},
 	{BFA_SM(bfa_ioc_sm_disabling), BFA_IOC_DISABLING},
 	{BFA_SM(bfa_ioc_sm_disabled), BFA_IOC_DISABLED},
+	{BFA_SM(bfa_ioc_sm_hwfail), BFA_IOC_HWFAIL},
 };
 
 /**
@@ -166,6 +169,7 @@ enum iocpf_event {
 	IOCPF_E_GETATTRFAIL	= 9,	/*!< init fail notice by ioc sm	*/
 	IOCPF_E_SEMLOCKED	= 10,   /*!< h/w semaphore is locked	*/
 	IOCPF_E_TIMEOUT		= 11,   /*!< f/w response timeout	*/
+	IOCPF_E_SEM_ERROR	= 12,   /*!< h/w sem mapping error	*/
 };
 
 /**
@@ -300,11 +304,16 @@ bfa_ioc_sm_enabling(struct bfa_ioc *ioc, enum ioc_event event)
 		/* !!! fall through !!! */
 	case IOC_E_HWERROR:
 		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
 		if (event != IOC_E_PFFAILED)
 			bfa_iocpf_initfail(ioc);
 		break;
 
+	case IOC_E_HWFAILED:
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_hwfail);
+		break;
+
 	case IOC_E_DISABLE:
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
 		break;
@@ -343,6 +352,7 @@ bfa_ioc_sm_getattr(struct bfa_ioc *ioc, enum ioc_event event)
 	case IOC_E_FWRSP_GETATTR:
 		del_timer(&ioc->ioc_timer);
 		bfa_ioc_check_attr_wwns(ioc);
+		bfa_ioc_hb_monitor(ioc);
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_op);
 		break;
 
@@ -352,7 +362,7 @@ bfa_ioc_sm_getattr(struct bfa_ioc *ioc, enum ioc_event event)
 		/* fall through */
 	case IOC_E_TIMEOUT:
 		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
 		if (event != IOC_E_PFFAILED)
 			bfa_iocpf_getattrfail(ioc);
 		break;
@@ -374,7 +384,7 @@ static void
 bfa_ioc_sm_op_entry(struct bfa_ioc *ioc)
 {
 	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK);
-	bfa_ioc_hb_monitor(ioc);
+	bfa_ioc_event_notify(ioc, BFA_IOC_E_ENABLED);
 }
 
 static void
@@ -394,12 +404,13 @@ bfa_ioc_sm_op(struct bfa_ioc *ioc, enum ioc_event event)
 		bfa_ioc_hb_stop(ioc);
 		/* !!! fall through !!! */
 	case IOC_E_HBFAIL:
-		bfa_ioc_fail_notify(ioc);
 		if (ioc->iocpf.auto_recover)
 			bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
 		else
 			bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
 
+		bfa_ioc_fail_notify(ioc);
+
 		if (event != IOC_E_PFFAILED)
 			bfa_iocpf_fail(ioc);
 		break;
@@ -435,6 +446,11 @@ bfa_ioc_sm_disabling(struct bfa_ioc *ioc, enum ioc_event event)
 		bfa_iocpf_fail(ioc);
 		break;
 
+	case IOC_E_HWFAILED:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_hwfail);
+		bfa_ioc_disable_comp(ioc);
+		break;
+
 	default:
 		bfa_sm_fault(event);
 	}
@@ -493,12 +509,14 @@ bfa_ioc_sm_fail_retry(struct bfa_ioc *ioc, enum ioc_event event)
 		 * Initialization retry failed.
 		 */
 		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
 		if (event != IOC_E_PFFAILED)
 			bfa_iocpf_initfail(ioc);
 		break;
 
-	case IOC_E_INITFAILED:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
+	case IOC_E_HWFAILED:
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_hwfail);
 		break;
 
 	case IOC_E_ENABLE:
@@ -552,6 +570,36 @@ bfa_ioc_sm_fail(struct bfa_ioc *ioc, enum ioc_event event)
 	}
 }
 
+static void
+bfa_ioc_sm_hwfail_entry(struct bfa_ioc *ioc)
+{
+}
+
+/**
+ * IOC failure.
+ */
+static void
+bfa_ioc_sm_hwfail(struct bfa_ioc *ioc, enum ioc_event event)
+{
+	switch (event) {
+
+	case IOC_E_ENABLE:
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		break;
+
+	case IOC_E_DISABLE:
+		ioc->cbfn->disable_cbfn(ioc->bfa);
+		break;
+
+	case IOC_E_DETACH:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
 /**
  * IOCPF State Machine
  */
@@ -562,7 +610,7 @@ bfa_ioc_sm_fail(struct bfa_ioc *ioc, enum ioc_event event)
 static void
 bfa_iocpf_sm_reset_entry(struct bfa_iocpf *iocpf)
 {
-	iocpf->retry_count = 0;
+	iocpf->fw_mismatch_notified = false;
 	iocpf->auto_recover = bfa_nw_auto_recover;
 }
 
@@ -607,7 +655,6 @@ bfa_iocpf_sm_fwcheck(struct bfa_iocpf *iocpf, enum iocpf_event event)
 	case IOCPF_E_SEMLOCKED:
 		if (bfa_ioc_firmware_lock(ioc)) {
 			if (bfa_ioc_sync_start(ioc)) {
-				iocpf->retry_count = 0;
 				bfa_ioc_sync_join(ioc);
 				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
 			} else {
@@ -622,6 +669,11 @@ bfa_iocpf_sm_fwcheck(struct bfa_iocpf *iocpf, enum iocpf_event event)
 		}
 		break;
 
+	case IOCPF_E_SEM_ERROR:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
+		bfa_ioc_pf_hwfailed(ioc);
+		break;
+
 	case IOCPF_E_DISABLE:
 		bfa_ioc_hw_sem_get_cancel(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
@@ -645,10 +697,10 @@ static void
 bfa_iocpf_sm_mismatch_entry(struct bfa_iocpf *iocpf)
 {
 	/* Call only the first time sm enters fwmismatch state. */
-	if (iocpf->retry_count == 0)
+	if (iocpf->fw_mismatch_notified == false)
 		bfa_ioc_pf_fwmismatch(iocpf->ioc);
 
-	iocpf->retry_count++;
+	iocpf->fw_mismatch_notified = true;
 	mod_timer(&(iocpf->ioc)->iocpf_timer, jiffies +
 		msecs_to_jiffies(BFA_IOC_TOV));
 }
@@ -711,6 +763,11 @@ bfa_iocpf_sm_semwait(struct bfa_iocpf *iocpf, enum iocpf_event event)
 		}
 		break;
 
+	case IOCPF_E_SEM_ERROR:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
+		bfa_ioc_pf_hwfailed(ioc);
+		break;
+
 	case IOCPF_E_DISABLE:
 		bfa_ioc_hw_sem_get_cancel(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
@@ -724,8 +781,7 @@ bfa_iocpf_sm_semwait(struct bfa_iocpf *iocpf, enum iocpf_event event)
 static void
 bfa_iocpf_sm_hwinit_entry(struct bfa_iocpf *iocpf)
 {
-	mod_timer(&(iocpf->ioc)->iocpf_timer, jiffies +
-		msecs_to_jiffies(BFA_IOC_TOV));
+	iocpf->poll_time = 0;
 	bfa_ioc_reset(iocpf->ioc, 0);
 }
 
@@ -740,19 +796,11 @@ bfa_iocpf_sm_hwinit(struct bfa_iocpf *iocpf, enum iocpf_event event)
 
 	switch (event) {
 	case IOCPF_E_FWREADY:
-		del_timer(&ioc->iocpf_timer);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_enabling);
 		break;
 
-	case IOCPF_E_INITFAIL:
-		del_timer(&ioc->iocpf_timer);
-		/*
-		 * !!! fall through !!!
-		 */
-
 	case IOCPF_E_TIMEOUT:
 		bfa_nw_ioc_hw_sem_release(ioc);
-		if (event == IOCPF_E_TIMEOUT)
 			bfa_ioc_pf_failed(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
 		break;
@@ -774,6 +822,10 @@ bfa_iocpf_sm_enabling_entry(struct bfa_iocpf *iocpf)
 {
 	mod_timer(&(iocpf->ioc)->iocpf_timer, jiffies +
 		msecs_to_jiffies(BFA_IOC_TOV));
+	/**
+	 * Enable Interrupts before sending fw IOC ENABLE cmd.
+	 */
+	iocpf->ioc->cbfn->reset_cbfn(iocpf->ioc->bfa);
 	bfa_ioc_send_enable(iocpf->ioc);
 }
 
@@ -811,21 +863,11 @@ bfa_iocpf_sm_enabling(struct bfa_iocpf *iocpf, enum iocpf_event event)
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling);
 		break;
 
-	case IOCPF_E_FWREADY:
-		bfa_ioc_send_enable(ioc);
-		break;
-
 	default:
 		bfa_sm_fault(event);
 	}
 }
 
-static bool
-bfa_nw_ioc_is_operational(struct bfa_ioc *ioc)
-{
-	return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_op);
-}
-
 static void
 bfa_iocpf_sm_ready_entry(struct bfa_iocpf *iocpf)
 {
@@ -835,8 +877,6 @@ bfa_iocpf_sm_ready_entry(struct bfa_iocpf *iocpf)
 static void
 bfa_iocpf_sm_ready(struct bfa_iocpf *iocpf, enum iocpf_event event)
 {
-	struct bfa_ioc *ioc = iocpf->ioc;
-
 	switch (event) {
 	case IOCPF_E_DISABLE:
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling);
@@ -850,14 +890,6 @@ bfa_iocpf_sm_ready(struct bfa_iocpf *iocpf, enum iocpf_event event)
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail_sync);
 		break;
 
-	case IOCPF_E_FWREADY:
-		bfa_ioc_pf_failed(ioc);
-		if (bfa_nw_ioc_is_operational(ioc))
-			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail_sync);
-		else
-			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
-		break;
-
 	default:
 		bfa_sm_fault(event);
 	}
@@ -881,7 +913,6 @@ bfa_iocpf_sm_disabling(struct bfa_iocpf *iocpf, enum iocpf_event event)
 
 	switch (event) {
 	case IOCPF_E_FWRSP_DISABLE:
-	case IOCPF_E_FWREADY:
 		del_timer(&ioc->iocpf_timer);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
 		break;
@@ -926,6 +957,11 @@ bfa_iocpf_sm_disabling_sync(struct bfa_iocpf *iocpf, enum iocpf_event event)
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
 		break;
 
+	case IOCPF_E_SEM_ERROR:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
+		bfa_ioc_pf_hwfailed(ioc);
+		break;
+
 	case IOCPF_E_FAIL:
 		break;
 
@@ -951,7 +987,6 @@ bfa_iocpf_sm_disabled(struct bfa_iocpf *iocpf, enum iocpf_event event)
 
 	switch (event) {
 	case IOCPF_E_ENABLE:
-		iocpf->retry_count = 0;
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
 		break;
 
@@ -982,20 +1017,15 @@ bfa_iocpf_sm_initfail_sync(struct bfa_iocpf *iocpf, enum iocpf_event event)
 	switch (event) {
 	case IOCPF_E_SEMLOCKED:
 		bfa_ioc_notify_fail(ioc);
-		bfa_ioc_sync_ack(ioc);
-		iocpf->retry_count++;
-		if (iocpf->retry_count >= BFA_IOC_HWINIT_MAX) {
-			bfa_ioc_sync_leave(ioc);
-			bfa_nw_ioc_hw_sem_release(ioc);
-			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail);
-		} else {
-			if (bfa_ioc_sync_complete(ioc))
-				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
-			else {
-				bfa_nw_ioc_hw_sem_release(ioc);
-				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
-			}
-		}
+		bfa_ioc_sync_leave(ioc);
+		writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
+		bfa_nw_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail);
+		break;
+
+	case IOCPF_E_SEM_ERROR:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
+		bfa_ioc_pf_hwfailed(ioc);
 		break;
 
 	case IOCPF_E_DISABLE:
@@ -1020,7 +1050,6 @@ bfa_iocpf_sm_initfail_sync(struct bfa_iocpf *iocpf, enum iocpf_event event)
 static void
 bfa_iocpf_sm_initfail_entry(struct bfa_iocpf *iocpf)
 {
-	bfa_ioc_pf_initfailed(iocpf->ioc);
 }
 
 /**
@@ -1071,11 +1100,11 @@ bfa_iocpf_sm_fail_sync(struct bfa_iocpf *iocpf, enum iocpf_event event)
 
 	switch (event) {
 	case IOCPF_E_SEMLOCKED:
-		iocpf->retry_count = 0;
 		bfa_ioc_sync_ack(ioc);
 		bfa_ioc_notify_fail(ioc);
 		if (!iocpf->auto_recover) {
 			bfa_ioc_sync_leave(ioc);
+			writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
 			bfa_nw_ioc_hw_sem_release(ioc);
 			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
 		} else {
@@ -1088,6 +1117,11 @@ bfa_iocpf_sm_fail_sync(struct bfa_iocpf *iocpf, enum iocpf_event event)
 		}
 		break;
 
+	case IOCPF_E_SEM_ERROR:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
+		bfa_ioc_pf_hwfailed(ioc);
+		break;
+
 	case IOCPF_E_DISABLE:
 		bfa_ioc_hw_sem_get_cancel(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
@@ -1158,13 +1192,13 @@ bfa_nw_ioc_sem_get(void __iomem *sem_reg)
 
 	r32 = readl(sem_reg);
 
-	while (r32 && (cnt < BFA_SEM_SPINCNT)) {
+	while ((r32 & 1) && (cnt < BFA_SEM_SPINCNT)) {
 		cnt++;
 		udelay(2);
 		r32 = readl(sem_reg);
 	}
 
-	if (r32 == 0)
+	if (!(r32 & 1))
 		return true;
 
 	BUG_ON(!(cnt < BFA_SEM_SPINCNT));
@@ -1210,7 +1244,11 @@ bfa_ioc_hw_sem_get(struct bfa_ioc *ioc)
 	 * will return 1. Semaphore is released by writing 1 to the register
 	 */
 	r32 = readl(ioc->ioc_regs.ioc_sem_reg);
-	if (r32 == 0) {
+	if (r32 == ~0) {
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_SEM_ERROR);
+		return;
+	}
+	if (!(r32 & 1)) {
 		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_SEMLOCKED);
 		return;
 	}
@@ -1331,7 +1369,7 @@ bfa_nw_ioc_fwver_cmp(struct bfa_ioc *ioc, struct bfi_ioc_image_hdr *fwhdr)
 	int i;
 
 	drv_fwhdr = (struct bfi_ioc_image_hdr *)
-		bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), 0);
+		bfa_cb_image_get_chunk(bfa_ioc_asic_gen(ioc), 0);
 
 	for (i = 0; i < BFI_IOC_MD5SUM_SZ; i++) {
 		if (fwhdr->md5sum[i] != drv_fwhdr->md5sum[i])
@@ -1352,12 +1390,12 @@ bfa_ioc_fwver_valid(struct bfa_ioc *ioc, u32 boot_env)
 
 	bfa_nw_ioc_fwver_get(ioc, &fwhdr);
 	drv_fwhdr = (struct bfi_ioc_image_hdr *)
-		bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), 0);
+		bfa_cb_image_get_chunk(bfa_ioc_asic_gen(ioc), 0);
 
 	if (fwhdr.signature != drv_fwhdr->signature)
 		return false;
 
-	if (swab32(fwhdr.param) != boot_env)
+	if (swab32(fwhdr.bootenv) != boot_env)
 		return false;
 
 	return bfa_nw_ioc_fwver_cmp(ioc, &fwhdr);
@@ -1388,11 +1426,11 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 
 	ioc_fwstate = readl(ioc->ioc_regs.ioc_fwstate);
 
-	boot_env = BFI_BOOT_LOADER_OS;
-
 	if (force)
 		ioc_fwstate = BFI_IOC_UNINIT;
 
+	boot_env = BFI_FWBOOT_ENV_OS;
+
 	/**
 	 * check if firmware is valid
 	 */
@@ -1400,7 +1438,8 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 		false : bfa_ioc_fwver_valid(ioc, boot_env);
 
 	if (!fwvalid) {
-		bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, boot_env);
+		bfa_ioc_boot(ioc, BFI_FWBOOT_TYPE_NORMAL, boot_env);
+		bfa_ioc_poll_fwinit(ioc);
 		return;
 	}
 
@@ -1409,7 +1448,7 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 	 * just wait for an initialization completion interrupt.
 	 */
 	if (ioc_fwstate == BFI_IOC_INITING) {
-		ioc->cbfn->reset_cbfn(ioc->bfa);
+		bfa_ioc_poll_fwinit(ioc);
 		return;
 	}
 
@@ -1423,7 +1462,6 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 		 * be flushed. Otherwise MSI-X interrupts are not delivered.
 		 */
 		bfa_ioc_msgflush(ioc);
-		ioc->cbfn->reset_cbfn(ioc->bfa);
 		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_FWREADY);
 		return;
 	}
@@ -1431,7 +1469,8 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 	/**
 	 * Initialize the h/w for any other states.
 	 */
-	bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, boot_env);
+	bfa_ioc_boot(ioc, BFI_FWBOOT_TYPE_NORMAL, boot_env);
+	bfa_ioc_poll_fwinit(ioc);
 }
 
 void
@@ -1475,7 +1514,7 @@ bfa_ioc_send_enable(struct bfa_ioc *ioc)
 
 	bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ,
 		    bfa_ioc_portid(ioc));
-	enable_req.ioc_class = ioc->ioc_mc;
+	enable_req.clscode = htons(ioc->clscode);
 	do_gettimeofday(&tv);
 	enable_req.tv_sec = ntohl(tv.tv_sec);
 	bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req));
@@ -1548,22 +1587,23 @@ bfa_ioc_download_fw(struct bfa_ioc *ioc, u32 boot_type,
 	u32 loff = 0;
 	u32 chunkno = 0;
 	u32 i;
+	u32 asicmode;
 
 	/**
 	 * Initialize LMEM first before code download
 	 */
 	bfa_ioc_lmem_init(ioc);
 
-	fwimg = bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), chunkno);
+	fwimg = bfa_cb_image_get_chunk(bfa_ioc_asic_gen(ioc), chunkno);
 
 	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
 
 	writel(pgnum, ioc->ioc_regs.host_page_num_fn);
 
-	for (i = 0; i < bfa_cb_image_get_size(BFA_IOC_FWIMG_TYPE(ioc)); i++) {
+	for (i = 0; i < bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)); i++) {
 		if (BFA_IOC_FLASH_CHUNK_NO(i) != chunkno) {
 			chunkno = BFA_IOC_FLASH_CHUNK_NO(i);
-			fwimg = bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc),
+			fwimg = bfa_cb_image_get_chunk(bfa_ioc_asic_gen(ioc),
 					BFA_IOC_FLASH_CHUNK_ADDR(chunkno));
 		}
 
@@ -1590,12 +1630,16 @@ bfa_ioc_download_fw(struct bfa_ioc *ioc, u32 boot_type,
 		      ioc->ioc_regs.host_page_num_fn);
 
 	/*
-	 * Set boot type and boot param at the end.
+	 * Set boot type, env and device mode at the end.
 	*/
+	asicmode = BFI_FWBOOT_DEVMODE(ioc->asic_gen, ioc->asic_mode,
+					ioc->port0_mode, ioc->port1_mode);
+	writel(asicmode, ((ioc->ioc_regs.smem_page_start)
+			+ BFI_FWBOOT_DEVMODE_OFF));
 	writel(boot_type, ((ioc->ioc_regs.smem_page_start)
-			+ (BFI_BOOT_TYPE_OFF)));
+			+ (BFI_FWBOOT_TYPE_OFF)));
 	writel(boot_env, ((ioc->ioc_regs.smem_page_start)
-			+ (BFI_BOOT_LOADER_OFF)));
+			+ (BFI_FWBOOT_ENV_OFF)));
 }
 
 static void
@@ -1605,6 +1649,20 @@ bfa_ioc_reset(struct bfa_ioc *ioc, bool force)
 }
 
 /**
+ * BFA ioc enable reply by firmware
+ */
+static void
+bfa_ioc_enable_reply(struct bfa_ioc *ioc, enum bfa_mode port_mode,
+			u8 cap_bm)
+{
+	struct bfa_iocpf *iocpf = &ioc->iocpf;
+
+	ioc->port_mode = ioc->port_mode_cfg = port_mode;
+	ioc->ad_cap_bm = cap_bm;
+	bfa_fsm_send_event(iocpf, IOCPF_E_FWRSP_ENABLE);
+}
+
+/**
  * @brief
  * Update BFA configuration from firmware configuration.
  */
@@ -1644,7 +1702,9 @@ bfa_ioc_mbox_poll(struct bfa_ioc *ioc)
 {
 	struct bfa_ioc_mbox_mod *mod = &ioc->mbox_mod;
 	struct bfa_mbox_cmd *cmd;
-	u32			stat;
+	bfa_mbox_cmd_cbfn_t cbfn;
+	void *cbarg;
+	u32 stat;
 
 	/**
 	 * If no command pending, do nothing
@@ -1664,6 +1724,16 @@ bfa_ioc_mbox_poll(struct bfa_ioc *ioc)
 	 */
 	bfa_q_deq(&mod->cmd_q, &cmd);
 	bfa_ioc_mbox_send(ioc, cmd->msg, sizeof(cmd->msg));
+
+	/**
+	 * Give a callback to the client, indicating that the command is sent
+	 */
+	if (cmd->cbfn) {
+		cbfn = cmd->cbfn;
+		cbarg = cmd->cbarg;
+		cmd->cbfn = NULL;
+		cbfn(cbarg);
+	}
 }
 
 /**
@@ -1702,15 +1772,15 @@ bfa_ioc_pf_disabled(struct bfa_ioc *ioc)
 }
 
 static void
-bfa_ioc_pf_initfailed(struct bfa_ioc *ioc)
+bfa_ioc_pf_failed(struct bfa_ioc *ioc)
 {
-	bfa_fsm_send_event(ioc, IOC_E_INITFAILED);
+	bfa_fsm_send_event(ioc, IOC_E_PFFAILED);
 }
 
 static void
-bfa_ioc_pf_failed(struct bfa_ioc *ioc)
+bfa_ioc_pf_hwfailed(struct bfa_ioc *ioc)
 {
-	bfa_fsm_send_event(ioc, IOC_E_PFFAILED);
+	bfa_fsm_send_event(ioc, IOC_E_HWFAILED);
 }
 
 static void
@@ -1749,10 +1819,9 @@ bfa_ioc_pll_init(struct bfa_ioc *ioc)
  * as the entry vector.
  */
 static void
-bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type, u32 boot_env)
+bfa_ioc_boot(struct bfa_ioc *ioc, enum bfi_fwboot_type boot_type,
+		u32 boot_env)
 {
-	void __iomem *rb;
-
 	bfa_ioc_stats(ioc, ioc_boots);
 
 	if (bfa_ioc_pll_init(ioc) != BFA_STATUS_OK)
@@ -1761,22 +1830,16 @@ bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type, u32 boot_env)
 	/**
 	 * Initialize IOC state of all functions on a chip reset.
 	 */
-	rb = ioc->pcidev.pci_bar_kva;
-	if (boot_type == BFI_BOOT_TYPE_MEMTEST) {
-		writel(BFI_IOC_MEMTEST, (rb + BFA_IOC0_STATE_REG));
-		writel(BFI_IOC_MEMTEST, (rb + BFA_IOC1_STATE_REG));
+	if (boot_type == BFI_FWBOOT_TYPE_MEMTEST) {
+		writel(BFI_IOC_MEMTEST, ioc->ioc_regs.ioc_fwstate);
+		writel(BFI_IOC_MEMTEST, ioc->ioc_regs.alt_ioc_fwstate);
 	} else {
-		writel(BFI_IOC_INITING, (rb + BFA_IOC0_STATE_REG));
-		writel(BFI_IOC_INITING, (rb + BFA_IOC1_STATE_REG));
+		writel(BFI_IOC_INITING, ioc->ioc_regs.ioc_fwstate);
+		writel(BFI_IOC_INITING, ioc->ioc_regs.alt_ioc_fwstate);
 	}
 
 	bfa_ioc_msgflush(ioc);
 	bfa_ioc_download_fw(ioc, boot_type, boot_env);
-
-	/**
-	 * Enable interrupts just before starting LPU
-	 */
-	ioc->cbfn->reset_cbfn(ioc->bfa);
 	bfa_ioc_lpu_start(ioc);
 }
 
@@ -1789,13 +1852,17 @@ bfa_nw_ioc_auto_recover(bool auto_recover)
 	bfa_nw_auto_recover = auto_recover;
 }
 
-static void
+static bool
 bfa_ioc_msgget(struct bfa_ioc *ioc, void *mbmsg)
 {
 	u32	*msgp = mbmsg;
 	u32	r32;
 	int		i;
 
+	r32 = readl(ioc->ioc_regs.lpu_mbox_cmd);
+	if ((r32 & 1) == 0)
+		return false;
+
 	/**
 	 * read the MBOX msg
 	 */
@@ -1811,6 +1878,8 @@ bfa_ioc_msgget(struct bfa_ioc *ioc, void *mbmsg)
 	 */
 	writel(1, ioc->ioc_regs.lpu_mbox_cmd);
 	readl(ioc->ioc_regs.lpu_mbox_cmd);
+
+	return true;
 }
 
 static void
@@ -1827,12 +1896,10 @@ bfa_ioc_isr(struct bfa_ioc *ioc, struct bfi_mbmsg *m)
 	case BFI_IOC_I2H_HBEAT:
 		break;
 
-	case BFI_IOC_I2H_READY_EVENT:
-		bfa_fsm_send_event(iocpf, IOCPF_E_FWREADY);
-		break;
-
 	case BFI_IOC_I2H_ENABLE_REPLY:
-		bfa_fsm_send_event(iocpf, IOCPF_E_FWRSP_ENABLE);
+		bfa_ioc_enable_reply(ioc,
+			(enum bfa_mode)msg->fw_event.port_mode,
+			msg->fw_event.cap_bm);
 		break;
 
 	case BFI_IOC_I2H_DISABLE_REPLY:
@@ -1878,6 +1945,9 @@ void
 bfa_nw_ioc_detach(struct bfa_ioc *ioc)
 {
 	bfa_fsm_send_event(ioc, IOC_E_DETACH);
+
+	/* Done with detach, empty the notify_q. */
+	INIT_LIST_HEAD(&ioc->notify_q);
 }
 
 /**
@@ -1887,12 +1957,29 @@ bfa_nw_ioc_detach(struct bfa_ioc *ioc)
  */
 void
 bfa_nw_ioc_pci_init(struct bfa_ioc *ioc, struct bfa_pcidev *pcidev,
-		 enum bfi_mclass mc)
+		 enum bfi_pcifn_class clscode)
 {
-	ioc->ioc_mc	= mc;
+	ioc->clscode	= clscode;
 	ioc->pcidev	= *pcidev;
-	ioc->ctdev	= bfa_asic_id_ct(ioc->pcidev.device_id);
-	ioc->cna	= ioc->ctdev && !ioc->fcmode;
+
+	/**
+	 * Initialize IOC and device personality
+	 */
+	ioc->port0_mode = ioc->port1_mode = BFI_PORT_MODE_FC;
+	ioc->asic_mode  = BFI_ASIC_MODE_FC;
+
+	switch (pcidev->device_id) {
+	case PCI_DEVICE_ID_BROCADE_CT:
+		ioc->asic_gen = BFI_ASIC_GEN_CT;
+		ioc->port0_mode = ioc->port1_mode = BFI_PORT_MODE_ETH;
+		ioc->asic_mode  = BFI_ASIC_MODE_ETH;
+		ioc->port_mode = ioc->port_mode_cfg = BFA_MODE_CNA;
+		ioc->ad_cap_bm = BFA_CM_CNA;
+		break;
+
+	default:
+		BUG_ON(1);
+	}
 
 	bfa_nw_ioc_set_ct_hwif(ioc);
 
@@ -1968,18 +2055,22 @@ bfa_nw_ioc_mbox_regisr(struct bfa_ioc *ioc, enum bfi_mclass mc,
  * @param[in]	ioc	IOC instance
  * @param[i]	cmd	Mailbox command
  */
-void
-bfa_nw_ioc_mbox_queue(struct bfa_ioc *ioc, struct bfa_mbox_cmd *cmd)
+bool
+bfa_nw_ioc_mbox_queue(struct bfa_ioc *ioc, struct bfa_mbox_cmd *cmd,
+			bfa_mbox_cmd_cbfn_t cbfn, void *cbarg)
 {
 	struct bfa_ioc_mbox_mod *mod = &ioc->mbox_mod;
 	u32			stat;
 
+	cmd->cbfn = cbfn;
+	cmd->cbarg = cbarg;
+
 	/**
 	 * If a previous command is pending, queue new command
 	 */
 	if (!list_empty(&mod->cmd_q)) {
 		list_add_tail(&cmd->qe, &mod->cmd_q);
-		return;
+		return true;
 	}
 
 	/**
@@ -1988,7 +2079,7 @@ bfa_nw_ioc_mbox_queue(struct bfa_ioc *ioc, struct bfa_mbox_cmd *cmd)
 	stat = readl(ioc->ioc_regs.hfn_mbox_cmd);
 	if (stat) {
 		list_add_tail(&cmd->qe, &mod->cmd_q);
-		return;
+		return true;
 	}
 
 	/**
@@ -1996,7 +2087,7 @@ bfa_nw_ioc_mbox_queue(struct bfa_ioc *ioc, struct bfa_mbox_cmd *cmd)
 	 */
 	bfa_ioc_mbox_send(ioc, cmd->msg, sizeof(cmd->msg));
 
-	return;
+	return false;
 }
 
 /**
@@ -2009,21 +2100,28 @@ bfa_nw_ioc_mbox_isr(struct bfa_ioc *ioc)
 	struct bfi_mbmsg m;
 	int				mc;
 
-	bfa_ioc_msgget(ioc, &m);
+	if (bfa_ioc_msgget(ioc, &m)) {
+		/**
+		 * Treat IOC message class as special.
+		 */
+		mc = m.mh.msg_class;
+		if (mc == BFI_MC_IOC) {
+			bfa_ioc_isr(ioc, &m);
+			return;
+		}
 
-	/**
-	 * Treat IOC message class as special.
-	 */
-	mc = m.mh.msg_class;
-	if (mc == BFI_MC_IOC) {
-		bfa_ioc_isr(ioc, &m);
-		return;
+		if ((mc >= BFI_MC_MAX) || (mod->mbhdlr[mc].cbfn == NULL))
+			return;
+
+		mod->mbhdlr[mc].cbfn(mod->mbhdlr[mc].cbarg, &m);
 	}
 
-	if ((mc >= BFI_MC_MAX) || (mod->mbhdlr[mc].cbfn == NULL))
-		return;
+	bfa_ioc_lpu_read_stat(ioc);
 
-	mod->mbhdlr[mc].cbfn(mod->mbhdlr[mc].cbarg, &m);
+	/**
+	 * Try to send pending mailbox commands
+	 */
+	bfa_ioc_mbox_poll(ioc);
 }
 
 void
@@ -2095,24 +2193,18 @@ bfa_ioc_get_adapter_attr(struct bfa_ioc *ioc,
 	ad_attr->asic_rev = ioc_attr->asic_rev;
 
 	bfa_ioc_get_pci_chip_rev(ioc, ad_attr->hw_ver);
-
-	ad_attr->cna_capable = ioc->cna;
-	ad_attr->trunk_capable = (ad_attr->nports > 1) && !ioc->cna;
 }
 
 static enum bfa_ioc_type
 bfa_ioc_get_type(struct bfa_ioc *ioc)
 {
-	if (!ioc->ctdev || ioc->fcmode)
-		return BFA_IOC_TYPE_FC;
-	else if (ioc->ioc_mc == BFI_MC_IOCFC)
-		return BFA_IOC_TYPE_FCoE;
-	else if (ioc->ioc_mc == BFI_MC_LL)
-		return BFA_IOC_TYPE_LL;
-	else {
-		BUG_ON(!(ioc->ioc_mc == BFI_MC_LL));
+	if (ioc->clscode == BFI_PCIFN_CLASS_ETH)
 		return BFA_IOC_TYPE_LL;
-	}
+
+	BUG_ON(!(ioc->clscode == BFI_PCIFN_CLASS_FC));
+
+	return (ioc->attr->port_mode == BFI_PORT_MODE_FC)
+		? BFA_IOC_TYPE_FC : BFA_IOC_TYPE_FCoE;
 }
 
 static void
@@ -2224,6 +2316,10 @@ bfa_nw_ioc_get_attr(struct bfa_ioc *ioc, struct bfa_ioc_attr *ioc_attr)
 
 	ioc_attr->state = bfa_ioc_get_state(ioc);
 	ioc_attr->port_id = ioc->port_id;
+	ioc_attr->port_mode = ioc->port_mode;
+
+	ioc_attr->port_mode_cfg = ioc->port_mode_cfg;
+	ioc_attr->cap_bm = ioc->ad_cap_bm;
 
 	ioc_attr->ioc_type = bfa_ioc_get_type(ioc);
 
@@ -2313,8 +2409,14 @@ void
 bfa_nw_iocpf_timeout(void *ioc_arg)
 {
 	struct bfa_ioc  *ioc = (struct bfa_ioc *) ioc_arg;
+	enum bfa_iocpf_state iocpf_st;
+
+	iocpf_st = bfa_sm_to_state(iocpf_sm_table, ioc->iocpf.fsm);
 
-	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT);
+	if (iocpf_st == BFA_IOCPF_HWINIT)
+		bfa_ioc_poll_fwinit(ioc);
+	else
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT);
 }
 
 void
@@ -2324,3 +2426,22 @@ bfa_nw_iocpf_sem_timeout(void *ioc_arg)
 
 	bfa_ioc_hw_sem_get(ioc);
 }
+
+static void
+bfa_ioc_poll_fwinit(struct bfa_ioc *ioc)
+{
+	u32 fwstate = readl(ioc->ioc_regs.ioc_fwstate);
+
+	if (fwstate == BFI_IOC_DISABLED) {
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_FWREADY);
+		return;
+	}
+
+	if (ioc->iocpf.poll_time >= BFA_IOC_TOV) {
+		bfa_nw_iocpf_timeout(ioc);
+	} else {
+		ioc->iocpf.poll_time += BFA_IOC_POLL_TOV;
+		mod_timer(&ioc->iocpf_timer, jiffies +
+			msecs_to_jiffies(BFA_IOC_POLL_TOV));
+	}
+}
diff --git a/drivers/net/bna/bfa_ioc.h b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
index bda866ba6e90..f5a3d4e82078 100644
--- a/drivers/net/bna/bfa_ioc.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
@@ -26,7 +26,7 @@
 #define BFA_IOC_TOV		3000	/* msecs */
 #define BFA_IOC_HWSEM_TOV	500	/* msecs */
 #define BFA_IOC_HB_TOV		500	/* msecs */
-#define BFA_IOC_HWINIT_MAX	5
+#define BFA_IOC_POLL_TOV	200	/* msecs */
 
 /**
  * PCI device information required by IOC
@@ -169,8 +169,9 @@ struct bfa_ioc_hbfail_notify {
 struct bfa_iocpf {
 	bfa_fsm_t		fsm;
 	struct bfa_ioc		*ioc;
-	u32			retry_count;
+	bool			fw_mismatch_notified;
 	bool			auto_recover;
+	u32			poll_time;
 };
 
 struct bfa_ioc {
@@ -186,12 +187,10 @@ struct bfa_ioc {
 	void			*dbg_fwsave;
 	int			dbg_fwsave_len;
 	bool			dbg_fwsave_once;
-	enum bfi_mclass		ioc_mc;
+	enum bfi_pcifn_class	clscode;
 	struct bfa_ioc_regs	ioc_regs;
 	struct bfa_ioc_drv_stats stats;
 	bool			fcmode;
-	bool			ctdev;
-	bool			cna;
 	bool			pllinit;
 	bool			stats_busy;	/*!< outstanding stats */
 	u8			port_id;
@@ -202,10 +201,18 @@ struct bfa_ioc {
 	struct bfa_ioc_mbox_mod	mbox_mod;
 	struct bfa_ioc_hwif	*ioc_hwif;
 	struct bfa_iocpf	iocpf;
+	enum bfi_asic_gen	asic_gen;
+	enum bfi_asic_mode	asic_mode;
+	enum bfi_port_mode	port0_mode;
+	enum bfi_port_mode	port1_mode;
+	enum bfa_mode		port_mode;
+	u8			ad_cap_bm;	/*!< adapter cap bit mask */
+	u8			port_mode_cfg;	/*!< config port mode */
 };
 
 struct bfa_ioc_hwif {
-	enum bfa_status (*ioc_pll_init) (void __iomem *rb, bool fcmode);
+	enum bfa_status (*ioc_pll_init) (void __iomem *rb,
+						enum bfi_asic_mode m);
 	bool		(*ioc_firmware_lock)	(struct bfa_ioc *ioc);
 	void		(*ioc_firmware_unlock)	(struct bfa_ioc *ioc);
 	void		(*ioc_reg_init)	(struct bfa_ioc *ioc);
@@ -219,12 +226,14 @@ struct bfa_ioc_hwif {
 	void		(*ioc_sync_leave)	(struct bfa_ioc *ioc);
 	void		(*ioc_sync_ack)		(struct bfa_ioc *ioc);
 	bool		(*ioc_sync_complete)	(struct bfa_ioc *ioc);
+	bool		(*ioc_lpu_read_stat)	(struct bfa_ioc *ioc);
 };
 
 #define bfa_ioc_pcifn(__ioc)		((__ioc)->pcidev.pci_func)
 #define bfa_ioc_devid(__ioc)		((__ioc)->pcidev.device_id)
 #define bfa_ioc_bar0(__ioc)		((__ioc)->pcidev.pci_bar_kva)
 #define bfa_ioc_portid(__ioc)		((__ioc)->port_id)
+#define bfa_ioc_asic_gen(__ioc)		((__ioc)->asic_gen)
 #define bfa_ioc_fetch_stats(__ioc, __stats) \
 		(((__stats)->drv_stats) = (__ioc)->stats)
 #define bfa_ioc_clr_stats(__ioc)	\
@@ -240,12 +249,9 @@ struct bfa_ioc_hwif {
 #define bfa_ioc_stats_hb_count(_ioc, _hb_count)	\
 	((_ioc)->stats.hb_count = (_hb_count))
 #define BFA_IOC_FWIMG_MINSZ	(16 * 1024)
-#define BFA_IOC_FWIMG_TYPE(__ioc)					\
-	(((__ioc)->ctdev) ?						\
-	 (((__ioc)->fcmode) ? BFI_IMAGE_CT_FC : BFI_IMAGE_CT_CNA) :	\
-	 BFI_IMAGE_CB_FC)
 #define BFA_IOC_FW_SMEM_SIZE(__ioc)					\
-	(((__ioc)->ctdev) ? BFI_SMEM_CT_SIZE : BFI_SMEM_CB_SIZE)
+	((bfa_ioc_asic_gen(__ioc) == BFI_ASIC_GEN_CB)			\
+	? BFI_SMEM_CB_SIZE : BFI_SMEM_CT_SIZE)
 #define BFA_IOC_FLASH_CHUNK_NO(off)		(off / BFI_FLASH_CHUNK_SZ_WORDS)
 #define BFA_IOC_FLASH_OFFSET_IN_CHUNK(off)	(off % BFI_FLASH_CHUNK_SZ_WORDS)
 #define BFA_IOC_FLASH_CHUNK_ADDR(chunkno)  (chunkno * BFI_FLASH_CHUNK_SZ_WORDS)
@@ -253,7 +259,9 @@ struct bfa_ioc_hwif {
 /**
  * IOC mailbox interface
  */
-void bfa_nw_ioc_mbox_queue(struct bfa_ioc *ioc, struct bfa_mbox_cmd *cmd);
+bool bfa_nw_ioc_mbox_queue(struct bfa_ioc *ioc,
+			struct bfa_mbox_cmd *cmd,
+			bfa_mbox_cmd_cbfn_t cbfn, void *cbarg);
 void bfa_nw_ioc_mbox_isr(struct bfa_ioc *ioc);
 void bfa_nw_ioc_mbox_regisr(struct bfa_ioc *ioc, enum bfi_mclass mc,
 		bfa_ioc_mbox_mcfunc_t cbfn, void *cbarg);
@@ -264,13 +272,18 @@ void bfa_nw_ioc_mbox_regisr(struct bfa_ioc *ioc, enum bfi_mclass mc,
 
 #define bfa_ioc_pll_init_asic(__ioc) \
 	((__ioc)->ioc_hwif->ioc_pll_init((__ioc)->pcidev.pci_bar_kva, \
-			   (__ioc)->fcmode))
+			   (__ioc)->asic_mode))
 
 #define	bfa_ioc_isr_mode_set(__ioc, __msix)			\
 			((__ioc)->ioc_hwif->ioc_isr_mode_set(__ioc, __msix))
 #define	bfa_ioc_ownership_reset(__ioc)				\
 			((__ioc)->ioc_hwif->ioc_ownership_reset(__ioc))
 
+#define bfa_ioc_lpu_read_stat(__ioc) do {				\
+		if ((__ioc)->ioc_hwif->ioc_lpu_read_stat)		\
+			((__ioc)->ioc_hwif->ioc_lpu_read_stat(__ioc));	\
+} while (0)
+
 void bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc);
 
 void bfa_nw_ioc_attach(struct bfa_ioc *ioc, void *bfa,
@@ -278,7 +291,7 @@ void bfa_nw_ioc_attach(struct bfa_ioc *ioc, void *bfa,
 void bfa_nw_ioc_auto_recover(bool auto_recover);
 void bfa_nw_ioc_detach(struct bfa_ioc *ioc);
 void bfa_nw_ioc_pci_init(struct bfa_ioc *ioc, struct bfa_pcidev *pcidev,
-		enum bfi_mclass mc);
+		enum bfi_pcifn_class clscode);
 u32 bfa_nw_ioc_meminfo(void);
 void bfa_nw_ioc_mem_claim(struct bfa_ioc *ioc,  u8 *dm_kva, u64 dm_pa);
 void bfa_nw_ioc_enable(struct bfa_ioc *ioc);
@@ -309,7 +322,7 @@ void bfa_nw_iocpf_sem_timeout(void *ioc);
 /*
  * F/W Image Size & Chunk
  */
-u32 *bfa_cb_image_get_chunk(int type, u32 off);
-u32 bfa_cb_image_get_size(int type);
+u32 *bfa_cb_image_get_chunk(enum bfi_asic_gen asic_gen, u32 off);
+u32 bfa_cb_image_get_size(enum bfi_asic_gen asic_gen);
 
 #endif /* __BFA_IOC_H__ */
diff --git a/drivers/net/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
index 87aecdf22cf9..b4429bc67c34 100644
--- a/drivers/net/bna/bfa_ioc_ct.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
@@ -19,7 +19,7 @@
 #include "bfa_ioc.h"
 #include "cna.h"
 #include "bfi.h"
-#include "bfi_ctreg.h"
+#include "bfi_reg.h"
 #include "bfa_defs.h"
 
 #define bfa_ioc_ct_sync_pos(__ioc)	\
@@ -46,30 +46,37 @@ static void bfa_ioc_ct_sync_join(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_sync_leave(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc);
 static bool bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc);
-static enum bfa_status bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode);
+static enum bfa_status bfa_ioc_ct_pll_init(void __iomem *rb,
+				enum bfi_asic_mode asic_mode);
 
 static struct bfa_ioc_hwif nw_hwif_ct;
 
+static void
+bfa_ioc_set_ctx_hwif(struct bfa_ioc *ioc, struct bfa_ioc_hwif *hwif)
+{
+	hwif->ioc_firmware_lock = bfa_ioc_ct_firmware_lock;
+	hwif->ioc_firmware_unlock = bfa_ioc_ct_firmware_unlock;
+	hwif->ioc_notify_fail = bfa_ioc_ct_notify_fail;
+	hwif->ioc_ownership_reset = bfa_ioc_ct_ownership_reset;
+	hwif->ioc_sync_start = bfa_ioc_ct_sync_start;
+	hwif->ioc_sync_join = bfa_ioc_ct_sync_join;
+	hwif->ioc_sync_leave = bfa_ioc_ct_sync_leave;
+	hwif->ioc_sync_ack = bfa_ioc_ct_sync_ack;
+	hwif->ioc_sync_complete = bfa_ioc_ct_sync_complete;
+}
+
 /**
  * Called from bfa_ioc_attach() to map asic specific calls.
  */
 void
 bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc)
 {
+	bfa_ioc_set_ctx_hwif(ioc, &nw_hwif_ct);
+
 	nw_hwif_ct.ioc_pll_init = bfa_ioc_ct_pll_init;
-	nw_hwif_ct.ioc_firmware_lock = bfa_ioc_ct_firmware_lock;
-	nw_hwif_ct.ioc_firmware_unlock = bfa_ioc_ct_firmware_unlock;
 	nw_hwif_ct.ioc_reg_init = bfa_ioc_ct_reg_init;
 	nw_hwif_ct.ioc_map_port = bfa_ioc_ct_map_port;
 	nw_hwif_ct.ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set;
-	nw_hwif_ct.ioc_notify_fail = bfa_ioc_ct_notify_fail;
-	nw_hwif_ct.ioc_ownership_reset = bfa_ioc_ct_ownership_reset;
-	nw_hwif_ct.ioc_sync_start = bfa_ioc_ct_sync_start;
-	nw_hwif_ct.ioc_sync_join = bfa_ioc_ct_sync_join;
-	nw_hwif_ct.ioc_sync_leave = bfa_ioc_ct_sync_leave;
-	nw_hwif_ct.ioc_sync_ack = bfa_ioc_ct_sync_ack;
-	nw_hwif_ct.ioc_sync_complete = bfa_ioc_ct_sync_complete;
-
 	ioc->ioc_hwif = &nw_hwif_ct;
 }
 
@@ -84,15 +91,9 @@ bfa_ioc_ct_firmware_lock(struct bfa_ioc *ioc)
 	struct bfi_ioc_image_hdr fwhdr;
 
 	/**
-	 * Firmware match check is relevant only for CNA.
-	 */
-	if (!ioc->cna)
-		return true;
-
-	/**
 	 * If bios boot (flash based) -- do not increment usage count
 	 */
-	if (bfa_cb_image_get_size(BFA_IOC_FWIMG_TYPE(ioc)) <
+	if (bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)) <
 						BFA_IOC_FWIMG_MINSZ)
 		return true;
 
@@ -140,15 +141,9 @@ bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc)
 	u32 usecnt;
 
 	/**
-	 * Firmware lock is relevant only for CNA.
-	 */
-	if (!ioc->cna)
-		return;
-
-	/**
 	 * If bios boot (flash based) -- do not decrement usage count
 	 */
-	if (bfa_cb_image_get_size(BFA_IOC_FWIMG_TYPE(ioc)) <
+	if (bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)) <
 						BFA_IOC_FWIMG_MINSZ)
 		return;
 
@@ -171,22 +166,17 @@ bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc)
 static void
 bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc)
 {
-	if (ioc->cna) {
-		writel(__FW_INIT_HALT_P, ioc->ioc_regs.ll_halt);
-		writel(__FW_INIT_HALT_P, ioc->ioc_regs.alt_ll_halt);
-		/* Wait for halt to take effect */
-		readl(ioc->ioc_regs.ll_halt);
-		readl(ioc->ioc_regs.alt_ll_halt);
-	} else {
-		writel(__PSS_ERR_STATUS_SET, ioc->ioc_regs.err_set);
-		readl(ioc->ioc_regs.err_set);
-	}
+	writel(__FW_INIT_HALT_P, ioc->ioc_regs.ll_halt);
+	writel(__FW_INIT_HALT_P, ioc->ioc_regs.alt_ll_halt);
+	/* Wait for halt to take effect */
+	readl(ioc->ioc_regs.ll_halt);
+	readl(ioc->ioc_regs.alt_ll_halt);
 }
 
 /**
  * Host to LPU mailbox message addresses
  */
-static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } iocreg_fnreg[] = {
+static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } ct_fnreg[] = {
 	{ HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 },
 	{ HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 },
 	{ HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2 },
@@ -196,21 +186,21 @@ static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } iocreg_fnreg[] = {
 /**
  * Host <-> LPU mailbox command/status registers - port 0
  */
-static struct { u32 hfn, lpu; } iocreg_mbcmd_p0[] = {
-	{ HOSTFN0_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN0_MBOX0_CMD_STAT },
-	{ HOSTFN1_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN1_MBOX0_CMD_STAT },
-	{ HOSTFN2_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN2_MBOX0_CMD_STAT },
-	{ HOSTFN3_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN3_MBOX0_CMD_STAT }
+static struct { u32 hfn, lpu; } ct_p0reg[] = {
+	{ HOSTFN0_LPU0_CMD_STAT, LPU0_HOSTFN0_CMD_STAT },
+	{ HOSTFN1_LPU0_CMD_STAT, LPU0_HOSTFN1_CMD_STAT },
+	{ HOSTFN2_LPU0_CMD_STAT, LPU0_HOSTFN2_CMD_STAT },
+	{ HOSTFN3_LPU0_CMD_STAT, LPU0_HOSTFN3_CMD_STAT }
 };
 
 /**
  * Host <-> LPU mailbox command/status registers - port 1
  */
-static struct { u32 hfn, lpu; } iocreg_mbcmd_p1[] = {
-	{ HOSTFN0_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN0_MBOX0_CMD_STAT },
-	{ HOSTFN1_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN1_MBOX0_CMD_STAT },
-	{ HOSTFN2_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN2_MBOX0_CMD_STAT },
-	{ HOSTFN3_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN3_MBOX0_CMD_STAT }
+static struct { u32 hfn, lpu; } ct_p1reg[] = {
+	{ HOSTFN0_LPU1_CMD_STAT, LPU1_HOSTFN0_CMD_STAT },
+	{ HOSTFN1_LPU1_CMD_STAT, LPU1_HOSTFN1_CMD_STAT },
+	{ HOSTFN2_LPU1_CMD_STAT, LPU1_HOSTFN2_CMD_STAT },
+	{ HOSTFN3_LPU1_CMD_STAT, LPU1_HOSTFN3_CMD_STAT }
 };
 
 static void
@@ -221,24 +211,24 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
 
 	rb = bfa_ioc_bar0(ioc);
 
-	ioc->ioc_regs.hfn_mbox = rb + iocreg_fnreg[pcifn].hfn_mbox;
-	ioc->ioc_regs.lpu_mbox = rb + iocreg_fnreg[pcifn].lpu_mbox;
-	ioc->ioc_regs.host_page_num_fn = rb + iocreg_fnreg[pcifn].hfn_pgn;
+	ioc->ioc_regs.hfn_mbox = rb + ct_fnreg[pcifn].hfn_mbox;
+	ioc->ioc_regs.lpu_mbox = rb + ct_fnreg[pcifn].lpu_mbox;
+	ioc->ioc_regs.host_page_num_fn = rb + ct_fnreg[pcifn].hfn_pgn;
 
 	if (ioc->port_id == 0) {
 		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
 		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
 		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG;
-		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
-		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
+		ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p0reg[pcifn].hfn;
+		ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p0reg[pcifn].lpu;
 		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
 		ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1;
 	} else {
 		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
 		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
 		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC0_STATE_REG;
-		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
-		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
+		ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p1reg[pcifn].hfn;
+		ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p1reg[pcifn].lpu;
 		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
 		ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0;
 	}
@@ -248,8 +238,8 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
 	 */
 	ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
 	ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG);
-	ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_425_CTL_REG);
-	ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_312_CTL_REG);
+	ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_LCLK_CTL_REG);
+	ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_SCLK_CTL_REG);
 
 	/*
 	 * IOC semaphore registers and serialization
@@ -309,7 +299,7 @@ bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix)
 	/**
 	 * If already in desired mode, do not change anything
 	 */
-	if (!msix && mode)
+	if ((!msix && mode) || (msix && !mode))
 		return;
 
 	if (msix)
@@ -329,11 +319,9 @@ bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix)
 static void
 bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc)
 {
-	if (ioc->cna) {
-		bfa_nw_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
-		writel(0, ioc->ioc_regs.ioc_usage_reg);
-		bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
-	}
+	bfa_nw_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
+	writel(0, ioc->ioc_regs.ioc_usage_reg);
+	bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
 
 	/*
 	 * Read the hw sem reg to make sure that it is locked
@@ -442,18 +430,20 @@ bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc)
 }
 
 static enum bfa_status
-bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode)
+bfa_ioc_ct_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode)
 {
 	u32	pll_sclk, pll_fclk, r32;
+	bool fcmode = (asic_mode == BFI_ASIC_MODE_FC);
+
+	pll_sclk = __APP_PLL_SCLK_LRESETN | __APP_PLL_SCLK_ENARST |
+		__APP_PLL_SCLK_RSEL200500 | __APP_PLL_SCLK_P0_1(3U) |
+		__APP_PLL_SCLK_JITLMT0_1(3U) |
+		__APP_PLL_SCLK_CNTLMT0_1(1U);
+	pll_fclk = __APP_PLL_LCLK_LRESETN | __APP_PLL_LCLK_ENARST |
+		__APP_PLL_LCLK_RSEL200500 | __APP_PLL_LCLK_P0_1(3U) |
+		__APP_PLL_LCLK_JITLMT0_1(3U) |
+		__APP_PLL_LCLK_CNTLMT0_1(1U);
 
-	pll_sclk = __APP_PLL_312_LRESETN | __APP_PLL_312_ENARST |
-		__APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(3U) |
-		__APP_PLL_312_JITLMT0_1(3U) |
-		__APP_PLL_312_CNTLMT0_1(1U);
-	pll_fclk = __APP_PLL_425_LRESETN | __APP_PLL_425_ENARST |
-		__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(3U) |
-		__APP_PLL_425_JITLMT0_1(3U) |
-		__APP_PLL_425_CNTLMT0_1(1U);
 	if (fcmode) {
 		writel(0, (rb + OP_MODE));
 		writel(__APP_EMS_CMLCKSEL |
@@ -474,27 +464,28 @@ bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode)
 	writel(0xffffffffU, (rb + HOSTFN0_INT_MSK));
 	writel(0xffffffffU, (rb + HOSTFN1_INT_MSK));
 	writel(pll_sclk |
-		__APP_PLL_312_LOGIC_SOFT_RESET,
-		rb + APP_PLL_312_CTL_REG);
+		__APP_PLL_SCLK_LOGIC_SOFT_RESET,
+		rb + APP_PLL_SCLK_CTL_REG);
 	writel(pll_fclk |
-		__APP_PLL_425_LOGIC_SOFT_RESET,
-		rb + APP_PLL_425_CTL_REG);
+		__APP_PLL_LCLK_LOGIC_SOFT_RESET,
+		rb + APP_PLL_LCLK_CTL_REG);
 	writel(pll_sclk |
-		__APP_PLL_312_LOGIC_SOFT_RESET | __APP_PLL_312_ENABLE,
-		rb + APP_PLL_312_CTL_REG);
+		__APP_PLL_SCLK_LOGIC_SOFT_RESET | __APP_PLL_SCLK_ENABLE,
+		rb + APP_PLL_SCLK_CTL_REG);
 	writel(pll_fclk |
-		__APP_PLL_425_LOGIC_SOFT_RESET | __APP_PLL_425_ENABLE,
-		rb + APP_PLL_425_CTL_REG);
+		__APP_PLL_LCLK_LOGIC_SOFT_RESET | __APP_PLL_LCLK_ENABLE,
+		rb + APP_PLL_LCLK_CTL_REG);
 	readl(rb + HOSTFN0_INT_MSK);
 	udelay(2000);
 	writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS));
 	writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS));
 	writel(pll_sclk |
-		__APP_PLL_312_ENABLE,
-		rb + APP_PLL_312_CTL_REG);
+		__APP_PLL_SCLK_ENABLE,
+		rb + APP_PLL_SCLK_CTL_REG);
 	writel(pll_fclk |
-		__APP_PLL_425_ENABLE,
-		rb + APP_PLL_425_CTL_REG);
+		__APP_PLL_LCLK_ENABLE,
+		rb + APP_PLL_LCLK_CTL_REG);
+
 	if (!fcmode) {
 		writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P0));
 		writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P1));
diff --git a/drivers/net/ethernet/brocade/bna/bfa_msgq.c b/drivers/net/ethernet/brocade/bna/bfa_msgq.c
new file mode 100644
index 000000000000..dd36427f4752
--- /dev/null
+++ b/drivers/net/ethernet/brocade/bna/bfa_msgq.c
@@ -0,0 +1,669 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+/**
+ * @file bfa_msgq.c MSGQ module source file.
+ */
+
+#include "bfi.h"
+#include "bfa_msgq.h"
+#include "bfa_ioc.h"
+
+#define call_cmdq_ent_cbfn(_cmdq_ent, _status)				\
+{									\
+	bfa_msgq_cmdcbfn_t cbfn;					\
+	void *cbarg;							\
+	cbfn = (_cmdq_ent)->cbfn;					\
+	cbarg = (_cmdq_ent)->cbarg;					\
+	(_cmdq_ent)->cbfn = NULL;					\
+	(_cmdq_ent)->cbarg = NULL;					\
+	if (cbfn) {							\
+		cbfn(cbarg, (_status));					\
+	}								\
+}
+
+static void bfa_msgq_cmdq_dbell(struct bfa_msgq_cmdq *cmdq);
+static void bfa_msgq_cmdq_copy_rsp(struct bfa_msgq_cmdq *cmdq);
+
+enum cmdq_event {
+	CMDQ_E_START			= 1,
+	CMDQ_E_STOP			= 2,
+	CMDQ_E_FAIL			= 3,
+	CMDQ_E_POST			= 4,
+	CMDQ_E_INIT_RESP		= 5,
+	CMDQ_E_DB_READY			= 6,
+};
+
+bfa_fsm_state_decl(cmdq, stopped, struct bfa_msgq_cmdq, enum cmdq_event);
+bfa_fsm_state_decl(cmdq, init_wait, struct bfa_msgq_cmdq, enum cmdq_event);
+bfa_fsm_state_decl(cmdq, ready, struct bfa_msgq_cmdq, enum cmdq_event);
+bfa_fsm_state_decl(cmdq, dbell_wait, struct bfa_msgq_cmdq,
+			enum cmdq_event);
+
+static void
+cmdq_sm_stopped_entry(struct bfa_msgq_cmdq *cmdq)
+{
+	struct bfa_msgq_cmd_entry *cmdq_ent;
+
+	cmdq->producer_index = 0;
+	cmdq->consumer_index = 0;
+	cmdq->flags = 0;
+	cmdq->token = 0;
+	cmdq->offset = 0;
+	cmdq->bytes_to_copy = 0;
+	while (!list_empty(&cmdq->pending_q)) {
+		bfa_q_deq(&cmdq->pending_q, &cmdq_ent);
+		bfa_q_qe_init(&cmdq_ent->qe);
+		call_cmdq_ent_cbfn(cmdq_ent, BFA_STATUS_FAILED);
+	}
+}
+
+static void
+cmdq_sm_stopped(struct bfa_msgq_cmdq *cmdq, enum cmdq_event event)
+{
+	switch (event) {
+	case CMDQ_E_START:
+		bfa_fsm_set_state(cmdq, cmdq_sm_init_wait);
+		break;
+
+	case CMDQ_E_STOP:
+	case CMDQ_E_FAIL:
+		/* No-op */
+		break;
+
+	case CMDQ_E_POST:
+		cmdq->flags |= BFA_MSGQ_CMDQ_F_DB_UPDATE;
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+cmdq_sm_init_wait_entry(struct bfa_msgq_cmdq *cmdq)
+{
+	bfa_wc_down(&cmdq->msgq->init_wc);
+}
+
+static void
+cmdq_sm_init_wait(struct bfa_msgq_cmdq *cmdq, enum cmdq_event event)
+{
+	switch (event) {
+	case CMDQ_E_STOP:
+	case CMDQ_E_FAIL:
+		bfa_fsm_set_state(cmdq, cmdq_sm_stopped);
+		break;
+
+	case CMDQ_E_POST:
+		cmdq->flags |= BFA_MSGQ_CMDQ_F_DB_UPDATE;
+		break;
+
+	case CMDQ_E_INIT_RESP:
+		if (cmdq->flags & BFA_MSGQ_CMDQ_F_DB_UPDATE) {
+			cmdq->flags &= ~BFA_MSGQ_CMDQ_F_DB_UPDATE;
+			bfa_fsm_set_state(cmdq, cmdq_sm_dbell_wait);
+		} else
+			bfa_fsm_set_state(cmdq, cmdq_sm_ready);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+cmdq_sm_ready_entry(struct bfa_msgq_cmdq *cmdq)
+{
+}
+
+static void
+cmdq_sm_ready(struct bfa_msgq_cmdq *cmdq, enum cmdq_event event)
+{
+	switch (event) {
+	case CMDQ_E_STOP:
+	case CMDQ_E_FAIL:
+		bfa_fsm_set_state(cmdq, cmdq_sm_stopped);
+		break;
+
+	case CMDQ_E_POST:
+		bfa_fsm_set_state(cmdq, cmdq_sm_dbell_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+cmdq_sm_dbell_wait_entry(struct bfa_msgq_cmdq *cmdq)
+{
+	bfa_msgq_cmdq_dbell(cmdq);
+}
+
+static void
+cmdq_sm_dbell_wait(struct bfa_msgq_cmdq *cmdq, enum cmdq_event event)
+{
+	switch (event) {
+	case CMDQ_E_STOP:
+	case CMDQ_E_FAIL:
+		bfa_fsm_set_state(cmdq, cmdq_sm_stopped);
+		break;
+
+	case CMDQ_E_POST:
+		cmdq->flags |= BFA_MSGQ_CMDQ_F_DB_UPDATE;
+		break;
+
+	case CMDQ_E_DB_READY:
+		if (cmdq->flags & BFA_MSGQ_CMDQ_F_DB_UPDATE) {
+			cmdq->flags &= ~BFA_MSGQ_CMDQ_F_DB_UPDATE;
+			bfa_fsm_set_state(cmdq, cmdq_sm_dbell_wait);
+		} else
+			bfa_fsm_set_state(cmdq, cmdq_sm_ready);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bfa_msgq_cmdq_dbell_ready(void *arg)
+{
+	struct bfa_msgq_cmdq *cmdq = (struct bfa_msgq_cmdq *)arg;
+	bfa_fsm_send_event(cmdq, CMDQ_E_DB_READY);
+}
+
+static void
+bfa_msgq_cmdq_dbell(struct bfa_msgq_cmdq *cmdq)
+{
+	struct bfi_msgq_h2i_db *dbell =
+		(struct bfi_msgq_h2i_db *)(&cmdq->dbell_mb.msg[0]);
+
+	memset(dbell, 0, sizeof(struct bfi_msgq_h2i_db));
+	bfi_h2i_set(dbell->mh, BFI_MC_MSGQ, BFI_MSGQ_H2I_DOORBELL_PI, 0);
+	dbell->mh.mtag.i2htok = 0;
+	dbell->idx.cmdq_pi = htons(cmdq->producer_index);
+
+	if (!bfa_nw_ioc_mbox_queue(cmdq->msgq->ioc, &cmdq->dbell_mb,
+				bfa_msgq_cmdq_dbell_ready, cmdq)) {
+		bfa_msgq_cmdq_dbell_ready(cmdq);
+	}
+}
+
+static void
+__cmd_copy(struct bfa_msgq_cmdq *cmdq, struct bfa_msgq_cmd_entry *cmd)
+{
+	size_t len = cmd->msg_size;
+	int num_entries = 0;
+	size_t to_copy;
+	u8 *src, *dst;
+
+	src = (u8 *)cmd->msg_hdr;
+	dst = (u8 *)cmdq->addr.kva;
+	dst += (cmdq->producer_index * BFI_MSGQ_CMD_ENTRY_SIZE);
+
+	while (len) {
+		to_copy = (len < BFI_MSGQ_CMD_ENTRY_SIZE) ?
+				len : BFI_MSGQ_CMD_ENTRY_SIZE;
+		memcpy(dst, src, to_copy);
+		len -= to_copy;
+		src += BFI_MSGQ_CMD_ENTRY_SIZE;
+		BFA_MSGQ_INDX_ADD(cmdq->producer_index, 1, cmdq->depth);
+		dst = (u8 *)cmdq->addr.kva;
+		dst += (cmdq->producer_index * BFI_MSGQ_CMD_ENTRY_SIZE);
+		num_entries++;
+	}
+
+}
+
+static void
+bfa_msgq_cmdq_ci_update(struct bfa_msgq_cmdq *cmdq, struct bfi_mbmsg *mb)
+{
+	struct bfi_msgq_i2h_db *dbell = (struct bfi_msgq_i2h_db *)mb;
+	struct bfa_msgq_cmd_entry *cmd;
+	int posted = 0;
+
+	cmdq->consumer_index = ntohs(dbell->idx.cmdq_ci);
+
+	/* Walk through pending list to see if the command can be posted */
+	while (!list_empty(&cmdq->pending_q)) {
+		cmd =
+		(struct bfa_msgq_cmd_entry *)bfa_q_first(&cmdq->pending_q);
+		if (ntohs(cmd->msg_hdr->num_entries) <=
+			BFA_MSGQ_FREE_CNT(cmdq)) {
+			list_del(&cmd->qe);
+			__cmd_copy(cmdq, cmd);
+			posted = 1;
+			call_cmdq_ent_cbfn(cmd, BFA_STATUS_OK);
+		} else {
+			break;
+		}
+	}
+
+	if (posted)
+		bfa_fsm_send_event(cmdq, CMDQ_E_POST);
+}
+
+static void
+bfa_msgq_cmdq_copy_next(void *arg)
+{
+	struct bfa_msgq_cmdq *cmdq = (struct bfa_msgq_cmdq *)arg;
+
+	if (cmdq->bytes_to_copy)
+		bfa_msgq_cmdq_copy_rsp(cmdq);
+}
+
+static void
+bfa_msgq_cmdq_copy_req(struct bfa_msgq_cmdq *cmdq, struct bfi_mbmsg *mb)
+{
+	struct bfi_msgq_i2h_cmdq_copy_req *req =
+		(struct bfi_msgq_i2h_cmdq_copy_req *)mb;
+
+	cmdq->token = 0;
+	cmdq->offset = ntohs(req->offset);
+	cmdq->bytes_to_copy = ntohs(req->len);
+	bfa_msgq_cmdq_copy_rsp(cmdq);
+}
+
+static void
+bfa_msgq_cmdq_copy_rsp(struct bfa_msgq_cmdq *cmdq)
+{
+	struct bfi_msgq_h2i_cmdq_copy_rsp *rsp =
+		(struct bfi_msgq_h2i_cmdq_copy_rsp *)&cmdq->copy_mb.msg[0];
+	int copied;
+	u8 *addr = (u8 *)cmdq->addr.kva;
+
+	memset(rsp, 0, sizeof(struct bfi_msgq_h2i_cmdq_copy_rsp));
+	bfi_h2i_set(rsp->mh, BFI_MC_MSGQ, BFI_MSGQ_H2I_CMDQ_COPY_RSP, 0);
+	rsp->mh.mtag.i2htok = htons(cmdq->token);
+	copied = (cmdq->bytes_to_copy >= BFI_CMD_COPY_SZ) ? BFI_CMD_COPY_SZ :
+		cmdq->bytes_to_copy;
+	addr += cmdq->offset;
+	memcpy(rsp->data, addr, copied);
+
+	cmdq->token++;
+	cmdq->offset += copied;
+	cmdq->bytes_to_copy -= copied;
+
+	if (!bfa_nw_ioc_mbox_queue(cmdq->msgq->ioc, &cmdq->copy_mb,
+				bfa_msgq_cmdq_copy_next, cmdq)) {
+		bfa_msgq_cmdq_copy_next(cmdq);
+	}
+}
+
+static void
+bfa_msgq_cmdq_attach(struct bfa_msgq_cmdq *cmdq, struct bfa_msgq *msgq)
+{
+	cmdq->depth = BFA_MSGQ_CMDQ_NUM_ENTRY;
+	INIT_LIST_HEAD(&cmdq->pending_q);
+	cmdq->msgq = msgq;
+	bfa_fsm_set_state(cmdq, cmdq_sm_stopped);
+}
+
+static void bfa_msgq_rspq_dbell(struct bfa_msgq_rspq *rspq);
+
+enum rspq_event {
+	RSPQ_E_START			= 1,
+	RSPQ_E_STOP			= 2,
+	RSPQ_E_FAIL			= 3,
+	RSPQ_E_RESP			= 4,
+	RSPQ_E_INIT_RESP		= 5,
+	RSPQ_E_DB_READY			= 6,
+};
+
+bfa_fsm_state_decl(rspq, stopped, struct bfa_msgq_rspq, enum rspq_event);
+bfa_fsm_state_decl(rspq, init_wait, struct bfa_msgq_rspq,
+			enum rspq_event);
+bfa_fsm_state_decl(rspq, ready, struct bfa_msgq_rspq, enum rspq_event);
+bfa_fsm_state_decl(rspq, dbell_wait, struct bfa_msgq_rspq,
+			enum rspq_event);
+
+static void
+rspq_sm_stopped_entry(struct bfa_msgq_rspq *rspq)
+{
+	rspq->producer_index = 0;
+	rspq->consumer_index = 0;
+	rspq->flags = 0;
+}
+
+static void
+rspq_sm_stopped(struct bfa_msgq_rspq *rspq, enum rspq_event event)
+{
+	switch (event) {
+	case RSPQ_E_START:
+		bfa_fsm_set_state(rspq, rspq_sm_init_wait);
+		break;
+
+	case RSPQ_E_STOP:
+	case RSPQ_E_FAIL:
+		/* No-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+rspq_sm_init_wait_entry(struct bfa_msgq_rspq *rspq)
+{
+	bfa_wc_down(&rspq->msgq->init_wc);
+}
+
+static void
+rspq_sm_init_wait(struct bfa_msgq_rspq *rspq, enum rspq_event event)
+{
+	switch (event) {
+	case RSPQ_E_FAIL:
+	case RSPQ_E_STOP:
+		bfa_fsm_set_state(rspq, rspq_sm_stopped);
+		break;
+
+	case RSPQ_E_INIT_RESP:
+		bfa_fsm_set_state(rspq, rspq_sm_ready);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+rspq_sm_ready_entry(struct bfa_msgq_rspq *rspq)
+{
+}
+
+static void
+rspq_sm_ready(struct bfa_msgq_rspq *rspq, enum rspq_event event)
+{
+	switch (event) {
+	case RSPQ_E_STOP:
+	case RSPQ_E_FAIL:
+		bfa_fsm_set_state(rspq, rspq_sm_stopped);
+		break;
+
+	case RSPQ_E_RESP:
+		bfa_fsm_set_state(rspq, rspq_sm_dbell_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+rspq_sm_dbell_wait_entry(struct bfa_msgq_rspq *rspq)
+{
+	if (!bfa_nw_ioc_is_disabled(rspq->msgq->ioc))
+		bfa_msgq_rspq_dbell(rspq);
+}
+
+static void
+rspq_sm_dbell_wait(struct bfa_msgq_rspq *rspq, enum rspq_event event)
+{
+	switch (event) {
+	case RSPQ_E_STOP:
+	case RSPQ_E_FAIL:
+		bfa_fsm_set_state(rspq, rspq_sm_stopped);
+		break;
+
+	case RSPQ_E_RESP:
+		rspq->flags |= BFA_MSGQ_RSPQ_F_DB_UPDATE;
+		break;
+
+	case RSPQ_E_DB_READY:
+		if (rspq->flags & BFA_MSGQ_RSPQ_F_DB_UPDATE) {
+			rspq->flags &= ~BFA_MSGQ_RSPQ_F_DB_UPDATE;
+			bfa_fsm_set_state(rspq, rspq_sm_dbell_wait);
+		} else
+			bfa_fsm_set_state(rspq, rspq_sm_ready);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bfa_msgq_rspq_dbell_ready(void *arg)
+{
+	struct bfa_msgq_rspq *rspq = (struct bfa_msgq_rspq *)arg;
+	bfa_fsm_send_event(rspq, RSPQ_E_DB_READY);
+}
+
+static void
+bfa_msgq_rspq_dbell(struct bfa_msgq_rspq *rspq)
+{
+	struct bfi_msgq_h2i_db *dbell =
+		(struct bfi_msgq_h2i_db *)(&rspq->dbell_mb.msg[0]);
+
+	memset(dbell, 0, sizeof(struct bfi_msgq_h2i_db));
+	bfi_h2i_set(dbell->mh, BFI_MC_MSGQ, BFI_MSGQ_H2I_DOORBELL_CI, 0);
+	dbell->mh.mtag.i2htok = 0;
+	dbell->idx.rspq_ci = htons(rspq->consumer_index);
+
+	if (!bfa_nw_ioc_mbox_queue(rspq->msgq->ioc, &rspq->dbell_mb,
+				bfa_msgq_rspq_dbell_ready, rspq)) {
+		bfa_msgq_rspq_dbell_ready(rspq);
+	}
+}
+
+static void
+bfa_msgq_rspq_pi_update(struct bfa_msgq_rspq *rspq, struct bfi_mbmsg *mb)
+{
+	struct bfi_msgq_i2h_db *dbell = (struct bfi_msgq_i2h_db *)mb;
+	struct bfi_msgq_mhdr *msghdr;
+	int num_entries;
+	int mc;
+	u8 *rspq_qe;
+
+	rspq->producer_index = ntohs(dbell->idx.rspq_pi);
+
+	while (rspq->consumer_index != rspq->producer_index) {
+		rspq_qe = (u8 *)rspq->addr.kva;
+		rspq_qe += (rspq->consumer_index * BFI_MSGQ_RSP_ENTRY_SIZE);
+		msghdr = (struct bfi_msgq_mhdr *)rspq_qe;
+
+		mc = msghdr->msg_class;
+		num_entries = ntohs(msghdr->num_entries);
+
+		if ((mc >= BFI_MC_MAX) || (rspq->rsphdlr[mc].cbfn == NULL))
+			break;
+
+		(rspq->rsphdlr[mc].cbfn)(rspq->rsphdlr[mc].cbarg, msghdr);
+
+		BFA_MSGQ_INDX_ADD(rspq->consumer_index, num_entries,
+				rspq->depth);
+	}
+
+	bfa_fsm_send_event(rspq, RSPQ_E_RESP);
+}
+
+static void
+bfa_msgq_rspq_attach(struct bfa_msgq_rspq *rspq, struct bfa_msgq *msgq)
+{
+	rspq->depth = BFA_MSGQ_RSPQ_NUM_ENTRY;
+	rspq->msgq = msgq;
+	bfa_fsm_set_state(rspq, rspq_sm_stopped);
+}
+
+static void
+bfa_msgq_init_rsp(struct bfa_msgq *msgq,
+		 struct bfi_mbmsg *mb)
+{
+	bfa_fsm_send_event(&msgq->cmdq, CMDQ_E_INIT_RESP);
+	bfa_fsm_send_event(&msgq->rspq, RSPQ_E_INIT_RESP);
+}
+
+static void
+bfa_msgq_init(void *arg)
+{
+	struct bfa_msgq *msgq = (struct bfa_msgq *)arg;
+	struct bfi_msgq_cfg_req *msgq_cfg =
+		(struct bfi_msgq_cfg_req *)&msgq->init_mb.msg[0];
+
+	memset(msgq_cfg, 0, sizeof(struct bfi_msgq_cfg_req));
+	bfi_h2i_set(msgq_cfg->mh, BFI_MC_MSGQ, BFI_MSGQ_H2I_INIT_REQ, 0);
+	msgq_cfg->mh.mtag.i2htok = 0;
+
+	bfa_dma_be_addr_set(msgq_cfg->cmdq.addr, msgq->cmdq.addr.pa);
+	msgq_cfg->cmdq.q_depth = htons(msgq->cmdq.depth);
+	bfa_dma_be_addr_set(msgq_cfg->rspq.addr, msgq->rspq.addr.pa);
+	msgq_cfg->rspq.q_depth = htons(msgq->rspq.depth);
+
+	bfa_nw_ioc_mbox_queue(msgq->ioc, &msgq->init_mb, NULL, NULL);
+}
+
+static void
+bfa_msgq_isr(void *cbarg, struct bfi_mbmsg *msg)
+{
+	struct bfa_msgq *msgq = (struct bfa_msgq *)cbarg;
+
+	switch (msg->mh.msg_id) {
+	case BFI_MSGQ_I2H_INIT_RSP:
+		bfa_msgq_init_rsp(msgq, msg);
+		break;
+
+	case BFI_MSGQ_I2H_DOORBELL_PI:
+		bfa_msgq_rspq_pi_update(&msgq->rspq, msg);
+		break;
+
+	case BFI_MSGQ_I2H_DOORBELL_CI:
+		bfa_msgq_cmdq_ci_update(&msgq->cmdq, msg);
+		break;
+
+	case BFI_MSGQ_I2H_CMDQ_COPY_REQ:
+		bfa_msgq_cmdq_copy_req(&msgq->cmdq, msg);
+		break;
+
+	default:
+		BUG_ON(1);
+	}
+}
+
+static void
+bfa_msgq_notify(void *cbarg, enum bfa_ioc_event event)
+{
+	struct bfa_msgq *msgq = (struct bfa_msgq *)cbarg;
+
+	switch (event) {
+	case BFA_IOC_E_ENABLED:
+		bfa_wc_init(&msgq->init_wc, bfa_msgq_init, msgq);
+		bfa_wc_up(&msgq->init_wc);
+		bfa_fsm_send_event(&msgq->cmdq, CMDQ_E_START);
+		bfa_wc_up(&msgq->init_wc);
+		bfa_fsm_send_event(&msgq->rspq, RSPQ_E_START);
+		bfa_wc_wait(&msgq->init_wc);
+		break;
+
+	case BFA_IOC_E_DISABLED:
+		bfa_fsm_send_event(&msgq->cmdq, CMDQ_E_STOP);
+		bfa_fsm_send_event(&msgq->rspq, RSPQ_E_STOP);
+		break;
+
+	case BFA_IOC_E_FAILED:
+		bfa_fsm_send_event(&msgq->cmdq, CMDQ_E_FAIL);
+		bfa_fsm_send_event(&msgq->rspq, RSPQ_E_FAIL);
+		break;
+
+	default:
+		break;
+	}
+}
+
+u32
+bfa_msgq_meminfo(void)
+{
+	return roundup(BFA_MSGQ_CMDQ_SIZE, BFA_DMA_ALIGN_SZ) +
+		roundup(BFA_MSGQ_RSPQ_SIZE, BFA_DMA_ALIGN_SZ);
+}
+
+void
+bfa_msgq_memclaim(struct bfa_msgq *msgq, u8 *kva, u64 pa)
+{
+	msgq->cmdq.addr.kva = kva;
+	msgq->cmdq.addr.pa  = pa;
+
+	kva += roundup(BFA_MSGQ_CMDQ_SIZE, BFA_DMA_ALIGN_SZ);
+	pa += roundup(BFA_MSGQ_CMDQ_SIZE, BFA_DMA_ALIGN_SZ);
+
+	msgq->rspq.addr.kva = kva;
+	msgq->rspq.addr.pa = pa;
+}
+
+void
+bfa_msgq_attach(struct bfa_msgq *msgq, struct bfa_ioc *ioc)
+{
+	msgq->ioc    = ioc;
+
+	bfa_msgq_cmdq_attach(&msgq->cmdq, msgq);
+	bfa_msgq_rspq_attach(&msgq->rspq, msgq);
+
+	bfa_nw_ioc_mbox_regisr(msgq->ioc, BFI_MC_MSGQ, bfa_msgq_isr, msgq);
+	bfa_q_qe_init(&msgq->ioc_notify);
+	bfa_ioc_notify_init(&msgq->ioc_notify, bfa_msgq_notify, msgq);
+	bfa_nw_ioc_notify_register(msgq->ioc, &msgq->ioc_notify);
+}
+
+void
+bfa_msgq_regisr(struct bfa_msgq *msgq, enum bfi_mclass mc,
+		bfa_msgq_mcfunc_t cbfn, void *cbarg)
+{
+	msgq->rspq.rsphdlr[mc].cbfn	= cbfn;
+	msgq->rspq.rsphdlr[mc].cbarg	= cbarg;
+}
+
+void
+bfa_msgq_cmd_post(struct bfa_msgq *msgq,  struct bfa_msgq_cmd_entry *cmd)
+{
+	if (ntohs(cmd->msg_hdr->num_entries) <=
+		BFA_MSGQ_FREE_CNT(&msgq->cmdq)) {
+		__cmd_copy(&msgq->cmdq, cmd);
+		call_cmdq_ent_cbfn(cmd, BFA_STATUS_OK);
+		bfa_fsm_send_event(&msgq->cmdq, CMDQ_E_POST);
+	} else {
+		list_add_tail(&cmd->qe, &msgq->cmdq.pending_q);
+	}
+}
+
+void
+bfa_msgq_rsp_copy(struct bfa_msgq *msgq, u8 *buf, size_t buf_len)
+{
+	struct bfa_msgq_rspq *rspq = &msgq->rspq;
+	size_t len = buf_len;
+	size_t to_copy;
+	int ci;
+	u8 *src, *dst;
+
+	ci = rspq->consumer_index;
+	src = (u8 *)rspq->addr.kva;
+	src += (ci * BFI_MSGQ_RSP_ENTRY_SIZE);
+	dst = buf;
+
+	while (len) {
+		to_copy = (len < BFI_MSGQ_RSP_ENTRY_SIZE) ?
+				len : BFI_MSGQ_RSP_ENTRY_SIZE;
+		memcpy(dst, src, to_copy);
+		len -= to_copy;
+		dst += BFI_MSGQ_RSP_ENTRY_SIZE;
+		BFA_MSGQ_INDX_ADD(ci, 1, rspq->depth);
+		src = (u8 *)rspq->addr.kva;
+		src += (ci * BFI_MSGQ_RSP_ENTRY_SIZE);
+	}
+}
diff --git a/drivers/net/ethernet/brocade/bna/bfa_msgq.h b/drivers/net/ethernet/brocade/bna/bfa_msgq.h
new file mode 100644
index 000000000000..a6a565a366dc
--- /dev/null
+++ b/drivers/net/ethernet/brocade/bna/bfa_msgq.h
@@ -0,0 +1,130 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+#ifndef __BFA_MSGQ_H__
+#define __BFA_MSGQ_H__
+
+#include "bfa_defs.h"
+#include "bfi.h"
+#include "bfa_ioc.h"
+#include "bfa_cs.h"
+
+#define BFA_MSGQ_FREE_CNT(_q)						\
+	(((_q)->consumer_index - (_q)->producer_index - 1) & ((_q)->depth - 1))
+
+#define BFA_MSGQ_INDX_ADD(_q_indx, _qe_num, _q_depth)			\
+	((_q_indx) = (((_q_indx) + (_qe_num)) & ((_q_depth) - 1)))
+
+#define BFA_MSGQ_CMDQ_NUM_ENTRY		128
+#define BFA_MSGQ_CMDQ_SIZE						\
+	(BFI_MSGQ_CMD_ENTRY_SIZE * BFA_MSGQ_CMDQ_NUM_ENTRY)
+
+#define BFA_MSGQ_RSPQ_NUM_ENTRY		128
+#define BFA_MSGQ_RSPQ_SIZE						\
+	(BFI_MSGQ_RSP_ENTRY_SIZE * BFA_MSGQ_RSPQ_NUM_ENTRY)
+
+#define bfa_msgq_cmd_set(_cmd, _cbfn, _cbarg, _msg_size, _msg_hdr)	\
+do {									\
+	(_cmd)->cbfn = (_cbfn);						\
+	(_cmd)->cbarg = (_cbarg);					\
+	(_cmd)->msg_size = (_msg_size);					\
+	(_cmd)->msg_hdr = (_msg_hdr);					\
+} while (0)
+
+struct bfa_msgq;
+
+typedef void (*bfa_msgq_cmdcbfn_t)(void *cbarg, enum bfa_status status);
+
+struct bfa_msgq_cmd_entry {
+	struct list_head				qe;
+	bfa_msgq_cmdcbfn_t		cbfn;
+	void				*cbarg;
+	size_t				msg_size;
+	struct bfi_msgq_mhdr *msg_hdr;
+};
+
+enum bfa_msgq_cmdq_flags {
+	BFA_MSGQ_CMDQ_F_DB_UPDATE	= 1,
+};
+
+struct bfa_msgq_cmdq {
+	bfa_fsm_t			fsm;
+	enum bfa_msgq_cmdq_flags flags;
+
+	u16			producer_index;
+	u16			consumer_index;
+	u16			depth; /* FW Q depth is 16 bits */
+	struct bfa_dma addr;
+	struct bfa_mbox_cmd dbell_mb;
+
+	u16			token;
+	int				offset;
+	int				bytes_to_copy;
+	struct bfa_mbox_cmd copy_mb;
+
+	struct list_head		pending_q; /* pending command queue */
+
+	struct bfa_msgq *msgq;
+};
+
+enum bfa_msgq_rspq_flags {
+	BFA_MSGQ_RSPQ_F_DB_UPDATE	= 1,
+};
+
+typedef void (*bfa_msgq_mcfunc_t)(void *cbarg, struct bfi_msgq_mhdr *mhdr);
+
+struct bfa_msgq_rspq {
+	bfa_fsm_t			fsm;
+	enum bfa_msgq_rspq_flags flags;
+
+	u16			producer_index;
+	u16			consumer_index;
+	u16			depth; /* FW Q depth is 16 bits */
+	struct bfa_dma addr;
+	struct bfa_mbox_cmd dbell_mb;
+
+	int				nmclass;
+	struct {
+		bfa_msgq_mcfunc_t	cbfn;
+		void			*cbarg;
+	} rsphdlr[BFI_MC_MAX];
+
+	struct bfa_msgq *msgq;
+};
+
+struct bfa_msgq {
+	struct bfa_msgq_cmdq cmdq;
+	struct bfa_msgq_rspq rspq;
+
+	struct bfa_wc			init_wc;
+	struct bfa_mbox_cmd init_mb;
+
+	struct bfa_ioc_notify ioc_notify;
+	struct bfa_ioc *ioc;
+};
+
+u32 bfa_msgq_meminfo(void);
+void bfa_msgq_memclaim(struct bfa_msgq *msgq, u8 *kva, u64 pa);
+void bfa_msgq_attach(struct bfa_msgq *msgq, struct bfa_ioc *ioc);
+void bfa_msgq_regisr(struct bfa_msgq *msgq, enum bfi_mclass mc,
+		     bfa_msgq_mcfunc_t cbfn, void *cbarg);
+void bfa_msgq_cmd_post(struct bfa_msgq *msgq,
+		       struct bfa_msgq_cmd_entry *cmd);
+void bfa_msgq_rsp_copy(struct bfa_msgq *msgq, u8 *buf, size_t buf_len);
+
+#endif
diff --git a/drivers/net/bna/bfi.h b/drivers/net/ethernet/brocade/bna/bfi.h
index 088211c2724f..19654cc7abab 100644
--- a/drivers/net/bna/bfi.h
+++ b/drivers/net/ethernet/brocade/bna/bfi.h
@@ -15,7 +15,6 @@
  * All rights reserved
  * www.brocade.com
  */
-
 #ifndef __BFI_H__
 #define __BFI_H__
 
@@ -28,12 +27,6 @@
  */
 #define	BFI_FLASH_CHUNK_SZ			256	/*!< Flash chunk size */
 #define	BFI_FLASH_CHUNK_SZ_WORDS	(BFI_FLASH_CHUNK_SZ/sizeof(u32))
-enum {
-	BFI_IMAGE_CB_FC,
-	BFI_IMAGE_CT_FC,
-	BFI_IMAGE_CT_CNA,
-	BFI_IMAGE_MAX,
-};
 
 /**
  * Msg header common to all msgs
@@ -43,17 +36,21 @@ struct bfi_mhdr {
 	u8		msg_id;		/*!< msg opcode with in the class   */
 	union {
 		struct {
-			u8	rsvd;
-			u8	lpu_id;	/*!< msg destination		    */
+			u8	qid;
+			u8	fn_lpu;	/*!< msg destination		    */
 		} h2i;
 		u16	i2htok;	/*!< token in msgs to host	    */
 	} mtag;
 };
 
-#define bfi_h2i_set(_mh, _mc, _op, _lpuid) do {		\
+#define bfi_fn_lpu(__fn, __lpu)	((__fn) << 1 | (__lpu))
+#define bfi_mhdr_2_fn(_mh)	((_mh)->mtag.h2i.fn_lpu >> 1)
+#define bfi_mhdr_2_qid(_mh)	((_mh)->mtag.h2i.qid)
+
+#define bfi_h2i_set(_mh, _mc, _op, _fn_lpu) do {		\
 	(_mh).msg_class			= (_mc);		\
 	(_mh).msg_id			= (_op);		\
-	(_mh).mtag.h2i.lpu_id	= (_lpuid);			\
+	(_mh).mtag.h2i.fn_lpu	= (_fn_lpu);			\
 } while (0)
 
 #define bfi_i2h_set(_mh, _mc, _op, _i2htok) do {		\
@@ -149,6 +146,14 @@ struct bfi_mbmsg {
 };
 
 /**
+ * Supported PCI function class codes (personality)
+ */
+enum bfi_pcifn_class {
+	BFI_PCIFN_CLASS_FC	= 0x0c04,
+	BFI_PCIFN_CLASS_ETH	= 0x0200,
+};
+
+/**
  * Message Classes
  */
 enum bfi_mclass {
@@ -183,14 +188,7 @@ enum bfi_mclass {
 #define BFI_IOC_MAX_CQS_ASIC	8
 #define BFI_IOC_MSGLEN_MAX	32	/* 32 bytes */
 
-#define BFI_BOOT_TYPE_OFF		8
-#define BFI_BOOT_LOADER_OFF		12
-
-#define BFI_BOOT_TYPE_NORMAL		0
-#define	BFI_BOOT_TYPE_FLASH		1
-#define	BFI_BOOT_TYPE_MEMTEST		2
-
-#define BFI_BOOT_LOADER_OS		0
+#define BFI_FWBOOT_ENV_OS		0
 
 #define BFI_BOOT_MEMTEST_RES_ADDR   0x900
 #define BFI_BOOT_MEMTEST_RES_SIG    0xA0A1A2A3
@@ -201,6 +199,21 @@ enum bfi_mclass {
  *----------------------------------------------------------------------
  */
 
+/**
+ * Different asic generations
+ */
+enum bfi_asic_gen {
+	BFI_ASIC_GEN_CB		= 1,
+	BFI_ASIC_GEN_CT		= 2,
+};
+
+enum bfi_asic_mode {
+	BFI_ASIC_MODE_FC	= 1,	/* FC upto 8G speed		*/
+	BFI_ASIC_MODE_FC16	= 2,	/* FC upto 16G speed		*/
+	BFI_ASIC_MODE_ETH	= 3,	/* Ethernet ports		*/
+	BFI_ASIC_MODE_COMBO	= 4,	/* FC 16G and Ethernet 10G port	*/
+};
+
 enum bfi_ioc_h2i_msgs {
 	BFI_IOC_H2I_ENABLE_REQ		= 1,
 	BFI_IOC_H2I_DISABLE_REQ		= 2,
@@ -213,8 +226,7 @@ enum bfi_ioc_i2h_msgs {
 	BFI_IOC_I2H_ENABLE_REPLY	= BFA_I2HM(1),
 	BFI_IOC_I2H_DISABLE_REPLY	= BFA_I2HM(2),
 	BFI_IOC_I2H_GETATTR_REPLY	= BFA_I2HM(3),
-	BFI_IOC_I2H_READY_EVENT		= BFA_I2HM(4),
-	BFI_IOC_I2H_HBEAT		= BFA_I2HM(5),
+	BFI_IOC_I2H_HBEAT		= BFA_I2HM(4),
 };
 
 /**
@@ -229,7 +241,8 @@ struct bfi_ioc_attr {
 	u64		mfg_pwwn;	/*!< Mfg port wwn	   */
 	u64		mfg_nwwn;	/*!< Mfg node wwn	   */
 	mac_t		mfg_mac;	/*!< Mfg mac		   */
-	u16	rsvd_a;
+	u8		port_mode;	/* enum bfi_port_mode	   */
+	u8		rsvd_a;
 	u64		pwwn;
 	u64		nwwn;
 	mac_t		mac;		/*!< PBC or Mfg mac	   */
@@ -282,28 +295,39 @@ struct bfi_ioc_getattr_reply {
 #define BFI_IOC_MD5SUM_SZ	4
 struct bfi_ioc_image_hdr {
 	u32	signature;	/*!< constant signature */
-	u32	rsvd_a;
+	u8	asic_gen;	/*!< asic generation */
+	u8	asic_mode;
+	u8	port0_mode;	/*!< device mode for port 0 */
+	u8	port1_mode;	/*!< device mode for port 1 */
 	u32	exec;		/*!< exec vector	*/
-	u32	param;		/*!< parameters		*/
+	u32	bootenv;	/*!< firmware boot env */
 	u32	rsvd_b[4];
 	u32	md5sum[BFI_IOC_MD5SUM_SZ];
 };
 
+#define BFI_FWBOOT_DEVMODE_OFF		4
+#define BFI_FWBOOT_TYPE_OFF		8
+#define BFI_FWBOOT_ENV_OFF		12
+#define BFI_FWBOOT_DEVMODE(__asic_gen, __asic_mode, __p0_mode, __p1_mode) \
+	(((u32)(__asic_gen)) << 24 |	\
+	 ((u32)(__asic_mode)) << 16 |	\
+	 ((u32)(__p0_mode)) << 8 |	\
+	 ((u32)(__p1_mode)))
+
 enum bfi_fwboot_type {
 	BFI_FWBOOT_TYPE_NORMAL	= 0,
 	BFI_FWBOOT_TYPE_FLASH	= 1,
 	BFI_FWBOOT_TYPE_MEMTEST	= 2,
 };
 
+enum bfi_port_mode {
+	BFI_PORT_MODE_FC	= 1,
+	BFI_PORT_MODE_ETH	= 2,
+};
+
 /**
  *  BFI_IOC_I2H_READY_EVENT message
  */
-struct bfi_ioc_rdy_event {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8			init_status;	/*!< init event status */
-	u8			rsvd[3];
-};
-
 struct bfi_ioc_hbeat {
 	struct bfi_mhdr mh;		/*!< common msg header		*/
 	u32	   hb_count;	/*!< current heart beat count	*/
@@ -360,8 +384,8 @@ enum {
  */
 struct bfi_ioc_ctrl_req {
 	struct bfi_mhdr mh;
-	u8			ioc_class;
-	u8			rsvd[3];
+	u16			clscode;
+	u16			rsvd;
 	u32		tv_sec;
 };
 
@@ -369,9 +393,11 @@ struct bfi_ioc_ctrl_req {
  * BFI_IOC_I2H_ENABLE_REPLY & BFI_IOC_I2H_DISABLE_REPLY messages
  */
 struct bfi_ioc_ctrl_reply {
-	struct bfi_mhdr mh;		/*!< Common msg header     */
+	struct bfi_mhdr mh;			/*!< Common msg header     */
 	u8			status;		/*!< enable/disable status */
-	u8			rsvd[3];
+	u8			port_mode;	/*!< enum bfa_mode */
+	u8			cap_bm;		/*!< capability bit mask */
+	u8			rsvd;
 };
 
 #define BFI_IOC_MSGSZ   8
@@ -391,10 +417,109 @@ union bfi_ioc_h2i_msg_u {
  */
 union bfi_ioc_i2h_msg_u {
 	struct bfi_mhdr mh;
-	struct bfi_ioc_rdy_event rdy_event;
+	struct bfi_ioc_ctrl_reply fw_event;
 	u32			mboxmsg[BFI_IOC_MSGSZ];
 };
 
+/**
+ *----------------------------------------------------------------------
+ *				MSGQ
+ *----------------------------------------------------------------------
+ */
+
+enum bfi_msgq_h2i_msgs {
+	BFI_MSGQ_H2I_INIT_REQ	   = 1,
+	BFI_MSGQ_H2I_DOORBELL_PI	= 2,
+	BFI_MSGQ_H2I_DOORBELL_CI	= 3,
+	BFI_MSGQ_H2I_CMDQ_COPY_RSP      = 4,
+};
+
+enum bfi_msgq_i2h_msgs {
+	BFI_MSGQ_I2H_INIT_RSP	   = BFA_I2HM(BFI_MSGQ_H2I_INIT_REQ),
+	BFI_MSGQ_I2H_DOORBELL_PI	= BFA_I2HM(BFI_MSGQ_H2I_DOORBELL_PI),
+	BFI_MSGQ_I2H_DOORBELL_CI	= BFA_I2HM(BFI_MSGQ_H2I_DOORBELL_CI),
+	BFI_MSGQ_I2H_CMDQ_COPY_REQ      = BFA_I2HM(BFI_MSGQ_H2I_CMDQ_COPY_RSP),
+};
+
+/* Messages(commands/responsed/AENS will have the following header */
+struct bfi_msgq_mhdr {
+	u8	msg_class;
+	u8	msg_id;
+	u16	msg_token;
+	u16	num_entries;
+	u8	enet_id;
+	u8	rsvd[1];
+};
+
+#define bfi_msgq_mhdr_set(_mh, _mc, _mid, _tok, _enet_id) do {	\
+	(_mh).msg_class	 = (_mc);	\
+	(_mh).msg_id	    = (_mid);       \
+	(_mh).msg_token	 = (_tok);       \
+	(_mh).enet_id	   = (_enet_id);   \
+} while (0)
+
+/*
+ * Mailbox  for messaging interface
+ */
+#define BFI_MSGQ_CMD_ENTRY_SIZE	 (64)    /* TBD */
+#define BFI_MSGQ_RSP_ENTRY_SIZE	 (64)    /* TBD */
+
+#define bfi_msgq_num_cmd_entries(_size)				 \
+	(((_size) + BFI_MSGQ_CMD_ENTRY_SIZE - 1) / BFI_MSGQ_CMD_ENTRY_SIZE)
+
+struct bfi_msgq {
+	union bfi_addr_u addr;
+	u16 q_depth;     /* Total num of entries in the queue */
+	u8 rsvd[2];
+};
+
+/* BFI_ENET_MSGQ_CFG_REQ TBD init or cfg? */
+struct bfi_msgq_cfg_req {
+	struct bfi_mhdr mh;
+	struct bfi_msgq cmdq;
+	struct bfi_msgq rspq;
+};
+
+/* BFI_ENET_MSGQ_CFG_RSP */
+struct bfi_msgq_cfg_rsp {
+	struct bfi_mhdr mh;
+	u8 cmd_status;
+	u8 rsvd[3];
+};
+
+/* BFI_MSGQ_H2I_DOORBELL */
+struct bfi_msgq_h2i_db {
+	struct bfi_mhdr mh;
+	union {
+		u16 cmdq_pi;
+		u16 rspq_ci;
+	} idx;
+};
+
+/* BFI_MSGQ_I2H_DOORBELL */
+struct bfi_msgq_i2h_db {
+	struct bfi_mhdr mh;
+	union {
+		u16 rspq_pi;
+		u16 cmdq_ci;
+	} idx;
+};
+
+#define BFI_CMD_COPY_SZ 28
+
+/* BFI_MSGQ_H2I_CMD_COPY_RSP */
+struct bfi_msgq_h2i_cmdq_copy_rsp {
+	struct bfi_mhdr mh;
+	u8	      data[BFI_CMD_COPY_SZ];
+};
+
+/* BFI_MSGQ_I2H_CMD_COPY_REQ */
+struct bfi_msgq_i2h_cmdq_copy_req {
+	struct bfi_mhdr mh;
+	u16     offset;
+	u16     len;
+};
+
 #pragma pack()
 
 #endif /* __BFI_H__ */
diff --git a/drivers/net/bna/bfi_cna.h b/drivers/net/ethernet/brocade/bna/bfi_cna.h
index 4eecabea397b..4eecabea397b 100644
--- a/drivers/net/bna/bfi_cna.h
+++ b/drivers/net/ethernet/brocade/bna/bfi_cna.h
diff --git a/drivers/net/ethernet/brocade/bna/bfi_enet.h b/drivers/net/ethernet/brocade/bna/bfi_enet.h
new file mode 100644
index 000000000000..a90f1cf46b41
--- /dev/null
+++ b/drivers/net/ethernet/brocade/bna/bfi_enet.h
@@ -0,0 +1,901 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+/**
+ * @file bfi_enet.h BNA Hardware and Firmware Interface
+ */
+
+/**
+ * Skipping statistics collection to avoid clutter.
+ * Command is no longer needed:
+ *	MTU
+ *	TxQ Stop
+ *	RxQ Stop
+ *	RxF Enable/Disable
+ *
+ * HDS-off request is dynamic
+ * keep structures as multiple of 32-bit fields for alignment.
+ * All values must be written in big-endian.
+ */
+#ifndef __BFI_ENET_H__
+#define __BFI_ENET_H__
+
+#include "bfa_defs.h"
+#include "bfi.h"
+
+#pragma pack(1)
+
+#define BFI_ENET_CFG_MAX		32	/* Max resources per PF */
+
+#define BFI_ENET_TXQ_PRIO_MAX		8
+#define BFI_ENET_RX_QSET_MAX		16
+#define BFI_ENET_TXQ_WI_VECT_MAX	4
+
+#define BFI_ENET_VLAN_ID_MAX		4096
+#define BFI_ENET_VLAN_BLOCK_SIZE	512	/* in bits */
+#define BFI_ENET_VLAN_BLOCKS_MAX					\
+	(BFI_ENET_VLAN_ID_MAX / BFI_ENET_VLAN_BLOCK_SIZE)
+#define BFI_ENET_VLAN_WORD_SIZE		32	/* in bits */
+#define BFI_ENET_VLAN_WORDS_MAX						\
+	(BFI_ENET_VLAN_BLOCK_SIZE / BFI_ENET_VLAN_WORD_SIZE)
+
+#define BFI_ENET_RSS_RIT_MAX		64	/* entries */
+#define BFI_ENET_RSS_KEY_LEN		10	/* 32-bit words */
+
+union bfi_addr_be_u {
+	struct {
+		u32	addr_hi;	/* Most Significant 32-bits */
+		u32	addr_lo;	/* Least Significant 32-Bits */
+	} a32;
+};
+
+/**
+ *	T X   Q U E U E   D E F I N E S
+ */
+/* TxQ Vector (a.k.a. Tx-Buffer Descriptor) */
+/* TxQ Entry Opcodes */
+#define BFI_ENET_TXQ_WI_SEND		(0x402)	/* Single Frame Transmission */
+#define BFI_ENET_TXQ_WI_SEND_LSO	(0x403)	/* Multi-Frame Transmission */
+#define BFI_ENET_TXQ_WI_EXTENSION	(0x104)	/* Extension WI */
+
+/* TxQ Entry Control Flags */
+#define BFI_ENET_TXQ_WI_CF_FCOE_CRC	(1 << 8)
+#define BFI_ENET_TXQ_WI_CF_IPID_MODE	(1 << 5)
+#define BFI_ENET_TXQ_WI_CF_INS_PRIO	(1 << 4)
+#define BFI_ENET_TXQ_WI_CF_INS_VLAN	(1 << 3)
+#define BFI_ENET_TXQ_WI_CF_UDP_CKSUM	(1 << 2)
+#define BFI_ENET_TXQ_WI_CF_TCP_CKSUM	(1 << 1)
+#define BFI_ENET_TXQ_WI_CF_IP_CKSUM	(1 << 0)
+
+struct bfi_enet_txq_wi_base {
+	u8			reserved;
+	u8			num_vectors;	/* number of vectors present */
+	u16			opcode;
+			/* BFI_ENET_TXQ_WI_SEND or BFI_ENET_TXQ_WI_SEND_LSO */
+	u16			flags;		/* OR of all the flags */
+	u16			l4_hdr_size_n_offset;
+	u16			vlan_tag;
+	u16			lso_mss;	/* Only 14 LSB are valid */
+	u32			frame_length;	/* Only 24 LSB are valid */
+};
+
+struct bfi_enet_txq_wi_ext {
+	u16			reserved;
+	u16			opcode;		/* BFI_ENET_TXQ_WI_EXTENSION */
+	u32			reserved2[3];
+};
+
+struct bfi_enet_txq_wi_vector {			/* Tx Buffer Descriptor */
+	u16			reserved;
+	u16			length;		/* Only 14 LSB are valid */
+	union bfi_addr_be_u	addr;
+};
+
+/**
+ *  TxQ Entry Structure
+ *
+ */
+struct bfi_enet_txq_entry {
+	union {
+		struct bfi_enet_txq_wi_base	base;
+		struct bfi_enet_txq_wi_ext	ext;
+	} wi;
+	struct bfi_enet_txq_wi_vector vector[BFI_ENET_TXQ_WI_VECT_MAX];
+};
+
+#define wi_hdr		wi.base
+#define wi_ext_hdr	wi.ext
+
+#define BFI_ENET_TXQ_WI_L4_HDR_N_OFFSET(_hdr_size, _offset) \
+		(((_hdr_size) << 10) | ((_offset) & 0x3FF))
+
+/**
+ *   R X   Q U E U E   D E F I N E S
+ */
+struct bfi_enet_rxq_entry {
+	union bfi_addr_be_u  rx_buffer;
+};
+
+/**
+ *   R X   C O M P L E T I O N   Q U E U E   D E F I N E S
+ */
+/* CQ Entry Flags */
+#define	BFI_ENET_CQ_EF_MAC_ERROR	(1 <<  0)
+#define	BFI_ENET_CQ_EF_FCS_ERROR	(1 <<  1)
+#define	BFI_ENET_CQ_EF_TOO_LONG		(1 <<  2)
+#define	BFI_ENET_CQ_EF_FC_CRC_OK	(1 <<  3)
+
+#define	BFI_ENET_CQ_EF_RSVD1		(1 <<  4)
+#define	BFI_ENET_CQ_EF_L4_CKSUM_OK	(1 <<  5)
+#define	BFI_ENET_CQ_EF_L3_CKSUM_OK	(1 <<  6)
+#define	BFI_ENET_CQ_EF_HDS_HEADER	(1 <<  7)
+
+#define	BFI_ENET_CQ_EF_UDP		(1 <<  8)
+#define	BFI_ENET_CQ_EF_TCP		(1 <<  9)
+#define	BFI_ENET_CQ_EF_IP_OPTIONS	(1 << 10)
+#define	BFI_ENET_CQ_EF_IPV6		(1 << 11)
+
+#define	BFI_ENET_CQ_EF_IPV4		(1 << 12)
+#define	BFI_ENET_CQ_EF_VLAN		(1 << 13)
+#define	BFI_ENET_CQ_EF_RSS		(1 << 14)
+#define	BFI_ENET_CQ_EF_RSVD2		(1 << 15)
+
+#define	BFI_ENET_CQ_EF_MCAST_MATCH	(1 << 16)
+#define	BFI_ENET_CQ_EF_MCAST		(1 << 17)
+#define BFI_ENET_CQ_EF_BCAST		(1 << 18)
+#define	BFI_ENET_CQ_EF_REMOTE		(1 << 19)
+
+#define	BFI_ENET_CQ_EF_LOCAL		(1 << 20)
+
+/* CQ Entry Structure */
+struct bfi_enet_cq_entry {
+	u32 flags;
+	u16	vlan_tag;
+	u16	length;
+	u32	rss_hash;
+	u8	valid;
+	u8	reserved1;
+	u8	reserved2;
+	u8	rxq_id;
+};
+
+/**
+ *   E N E T   C O N T R O L   P A T H   C O M M A N D S
+ */
+struct bfi_enet_q {
+	union bfi_addr_u	pg_tbl;
+	union bfi_addr_u	first_entry;
+	u16		pages;	/* # of pages */
+	u16		page_sz;
+};
+
+struct bfi_enet_txq {
+	struct bfi_enet_q	q;
+	u8			priority;
+	u8			rsvd[3];
+};
+
+struct bfi_enet_rxq {
+	struct bfi_enet_q	q;
+	u16		rx_buffer_size;
+	u16		rsvd;
+};
+
+struct bfi_enet_cq {
+	struct bfi_enet_q	q;
+};
+
+struct bfi_enet_ib_cfg {
+	u8		int_pkt_dma;
+	u8		int_enabled;
+	u8		int_pkt_enabled;
+	u8		continuous_coalescing;
+	u8		msix;
+	u8		rsvd[3];
+	u32	coalescing_timeout;
+	u32	inter_pkt_timeout;
+	u8		inter_pkt_count;
+	u8		rsvd1[3];
+};
+
+struct bfi_enet_ib {
+	union bfi_addr_u	index_addr;
+	union {
+		u16	msix_index;
+		u16	intx_bitmask;
+	} intr;
+	u16		rsvd;
+};
+
+/**
+ * ENET command messages
+ */
+enum bfi_enet_h2i_msgs {
+	/* Rx Commands */
+	BFI_ENET_H2I_RX_CFG_SET_REQ = 1,
+	BFI_ENET_H2I_RX_CFG_CLR_REQ = 2,
+
+	BFI_ENET_H2I_RIT_CFG_REQ = 3,
+	BFI_ENET_H2I_RSS_CFG_REQ = 4,
+	BFI_ENET_H2I_RSS_ENABLE_REQ = 5,
+	BFI_ENET_H2I_RX_PROMISCUOUS_REQ = 6,
+	BFI_ENET_H2I_RX_DEFAULT_REQ = 7,
+
+	BFI_ENET_H2I_MAC_UCAST_SET_REQ = 8,
+	BFI_ENET_H2I_MAC_UCAST_CLR_REQ = 9,
+	BFI_ENET_H2I_MAC_UCAST_ADD_REQ = 10,
+	BFI_ENET_H2I_MAC_UCAST_DEL_REQ = 11,
+
+	BFI_ENET_H2I_MAC_MCAST_ADD_REQ = 12,
+	BFI_ENET_H2I_MAC_MCAST_DEL_REQ = 13,
+	BFI_ENET_H2I_MAC_MCAST_FILTER_REQ = 14,
+
+	BFI_ENET_H2I_RX_VLAN_SET_REQ = 15,
+	BFI_ENET_H2I_RX_VLAN_STRIP_ENABLE_REQ = 16,
+
+	/* Tx Commands */
+	BFI_ENET_H2I_TX_CFG_SET_REQ = 17,
+	BFI_ENET_H2I_TX_CFG_CLR_REQ = 18,
+
+	/* Port Commands */
+	BFI_ENET_H2I_PORT_ADMIN_UP_REQ = 19,
+	BFI_ENET_H2I_SET_PAUSE_REQ = 20,
+	BFI_ENET_H2I_DIAG_LOOPBACK_REQ = 21,
+
+	/* Get Attributes Command */
+	BFI_ENET_H2I_GET_ATTR_REQ = 22,
+
+	/*  Statistics Commands */
+	BFI_ENET_H2I_STATS_GET_REQ = 23,
+	BFI_ENET_H2I_STATS_CLR_REQ = 24,
+
+	BFI_ENET_H2I_WOL_MAGIC_REQ = 25,
+	BFI_ENET_H2I_WOL_FRAME_REQ = 26,
+
+	BFI_ENET_H2I_MAX = 27,
+};
+
+enum bfi_enet_i2h_msgs {
+	/* Rx Responses */
+	BFI_ENET_I2H_RX_CFG_SET_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RX_CFG_SET_REQ),
+	BFI_ENET_I2H_RX_CFG_CLR_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RX_CFG_CLR_REQ),
+
+	BFI_ENET_I2H_RIT_CFG_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RIT_CFG_REQ),
+	BFI_ENET_I2H_RSS_CFG_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RSS_CFG_REQ),
+	BFI_ENET_I2H_RSS_ENABLE_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RSS_ENABLE_REQ),
+	BFI_ENET_I2H_RX_PROMISCUOUS_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RX_PROMISCUOUS_REQ),
+	BFI_ENET_I2H_RX_DEFAULT_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RX_DEFAULT_REQ),
+
+	BFI_ENET_I2H_MAC_UCAST_SET_RSP =
+		BFA_I2HM(BFI_ENET_H2I_MAC_UCAST_SET_REQ),
+	BFI_ENET_I2H_MAC_UCAST_CLR_RSP =
+		BFA_I2HM(BFI_ENET_H2I_MAC_UCAST_CLR_REQ),
+	BFI_ENET_I2H_MAC_UCAST_ADD_RSP =
+		BFA_I2HM(BFI_ENET_H2I_MAC_UCAST_ADD_REQ),
+	BFI_ENET_I2H_MAC_UCAST_DEL_RSP =
+		BFA_I2HM(BFI_ENET_H2I_MAC_UCAST_DEL_REQ),
+
+	BFI_ENET_I2H_MAC_MCAST_ADD_RSP =
+		BFA_I2HM(BFI_ENET_H2I_MAC_MCAST_ADD_REQ),
+	BFI_ENET_I2H_MAC_MCAST_DEL_RSP =
+		BFA_I2HM(BFI_ENET_H2I_MAC_MCAST_DEL_REQ),
+	BFI_ENET_I2H_MAC_MCAST_FILTER_RSP =
+		BFA_I2HM(BFI_ENET_H2I_MAC_MCAST_FILTER_REQ),
+
+	BFI_ENET_I2H_RX_VLAN_SET_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RX_VLAN_SET_REQ),
+
+	BFI_ENET_I2H_RX_VLAN_STRIP_ENABLE_RSP =
+		BFA_I2HM(BFI_ENET_H2I_RX_VLAN_STRIP_ENABLE_REQ),
+
+	/* Tx Responses */
+	BFI_ENET_I2H_TX_CFG_SET_RSP =
+		BFA_I2HM(BFI_ENET_H2I_TX_CFG_SET_REQ),
+	BFI_ENET_I2H_TX_CFG_CLR_RSP =
+		BFA_I2HM(BFI_ENET_H2I_TX_CFG_CLR_REQ),
+
+	/* Port Responses */
+	BFI_ENET_I2H_PORT_ADMIN_RSP =
+		BFA_I2HM(BFI_ENET_H2I_PORT_ADMIN_UP_REQ),
+
+	BFI_ENET_I2H_SET_PAUSE_RSP =
+		BFA_I2HM(BFI_ENET_H2I_SET_PAUSE_REQ),
+	BFI_ENET_I2H_DIAG_LOOPBACK_RSP =
+		BFA_I2HM(BFI_ENET_H2I_DIAG_LOOPBACK_REQ),
+
+	/*  Attributes Response */
+	BFI_ENET_I2H_GET_ATTR_RSP =
+		BFA_I2HM(BFI_ENET_H2I_GET_ATTR_REQ),
+
+	/* Statistics Responses */
+	BFI_ENET_I2H_STATS_GET_RSP =
+		BFA_I2HM(BFI_ENET_H2I_STATS_GET_REQ),
+	BFI_ENET_I2H_STATS_CLR_RSP =
+		BFA_I2HM(BFI_ENET_H2I_STATS_CLR_REQ),
+
+	BFI_ENET_I2H_WOL_MAGIC_RSP =
+		BFA_I2HM(BFI_ENET_H2I_WOL_MAGIC_REQ),
+	BFI_ENET_I2H_WOL_FRAME_RSP =
+		BFA_I2HM(BFI_ENET_H2I_WOL_FRAME_REQ),
+
+	/* AENs */
+	BFI_ENET_I2H_LINK_DOWN_AEN = BFA_I2HM(BFI_ENET_H2I_MAX),
+	BFI_ENET_I2H_LINK_UP_AEN = BFA_I2HM(BFI_ENET_H2I_MAX + 1),
+
+	BFI_ENET_I2H_PORT_ENABLE_AEN = BFA_I2HM(BFI_ENET_H2I_MAX + 2),
+	BFI_ENET_I2H_PORT_DISABLE_AEN = BFA_I2HM(BFI_ENET_H2I_MAX + 3),
+
+	BFI_ENET_I2H_BW_UPDATE_AEN = BFA_I2HM(BFI_ENET_H2I_MAX + 4),
+};
+
+/**
+ *  The following error codes can be returned by the enet commands
+ */
+enum bfi_enet_err {
+	BFI_ENET_CMD_OK		= 0,
+	BFI_ENET_CMD_FAIL	= 1,
+	BFI_ENET_CMD_DUP_ENTRY	= 2,	/* !< Duplicate entry in CAM */
+	BFI_ENET_CMD_CAM_FULL	= 3,	/* !< CAM is full */
+	BFI_ENET_CMD_NOT_OWNER	= 4,	/* !< Not permitted, b'cos not owner */
+	BFI_ENET_CMD_NOT_EXEC	= 5,	/* !< Was not sent to f/w at all */
+	BFI_ENET_CMD_WAITING	= 6,	/* !< Waiting for completion */
+	BFI_ENET_CMD_PORT_DISABLED = 7,	/* !< port in disabled state */
+};
+
+/**
+ * Generic Request
+ *
+ * bfi_enet_req is used by:
+ *	BFI_ENET_H2I_RX_CFG_CLR_REQ
+ *	BFI_ENET_H2I_TX_CFG_CLR_REQ
+ */
+struct bfi_enet_req {
+	struct bfi_msgq_mhdr mh;
+};
+
+/**
+ * Enable/Disable Request
+ *
+ * bfi_enet_enable_req is used by:
+ *	BFI_ENET_H2I_RSS_ENABLE_REQ	(enet_id must be zero)
+ *	BFI_ENET_H2I_RX_PROMISCUOUS_REQ (enet_id must be zero)
+ *	BFI_ENET_H2I_RX_DEFAULT_REQ	(enet_id must be zero)
+ *	BFI_ENET_H2I_RX_MAC_MCAST_FILTER_REQ
+ *	BFI_ENET_H2I_PORT_ADMIN_UP_REQ	(enet_id must be zero)
+ */
+struct bfi_enet_enable_req {
+	struct		bfi_msgq_mhdr mh;
+	u8		enable;		/* 1 = enable;  0 = disable */
+	u8		rsvd[3];
+};
+
+/**
+ * Generic Response
+ */
+struct bfi_enet_rsp {
+	struct bfi_msgq_mhdr mh;
+	u8		error;		/*!< if error see cmd_offset */
+	u8		rsvd;
+	u16		cmd_offset;	/*!< offset to invalid parameter */
+};
+
+/**
+ * GLOBAL CONFIGURATION
+ */
+
+/**
+ * bfi_enet_attr_req is used by:
+ *	BFI_ENET_H2I_GET_ATTR_REQ
+ */
+struct bfi_enet_attr_req {
+	struct bfi_msgq_mhdr	mh;
+};
+
+/**
+ * bfi_enet_attr_rsp is used by:
+ *	BFI_ENET_I2H_GET_ATTR_RSP
+ */
+struct bfi_enet_attr_rsp {
+	struct bfi_msgq_mhdr mh;
+	u8		error;		/*!< if error see cmd_offset */
+	u8		rsvd;
+	u16		cmd_offset;	/*!< offset to invalid parameter */
+	u32		max_cfg;
+	u32		max_ucmac;
+	u32		rit_size;
+};
+
+/**
+ * Tx Configuration
+ *
+ * bfi_enet_tx_cfg is used by:
+ *	BFI_ENET_H2I_TX_CFG_SET_REQ
+ */
+enum bfi_enet_tx_vlan_mode {
+	BFI_ENET_TX_VLAN_NOP	= 0,
+	BFI_ENET_TX_VLAN_INS	= 1,
+	BFI_ENET_TX_VLAN_WI	= 2,
+};
+
+struct bfi_enet_tx_cfg {
+	u8		vlan_mode;	/*!< processing mode */
+	u8		rsvd;
+	u16		vlan_id;
+	u8		admit_tagged_frame;
+	u8		apply_vlan_filter;
+	u8		add_to_vswitch;
+	u8		rsvd1[1];
+};
+
+struct bfi_enet_tx_cfg_req {
+	struct bfi_msgq_mhdr mh;
+	u8			num_queues;	/* # of Tx Queues */
+	u8			rsvd[3];
+
+	struct {
+		struct bfi_enet_txq	q;
+		struct bfi_enet_ib	ib;
+	} q_cfg[BFI_ENET_TXQ_PRIO_MAX];
+
+	struct bfi_enet_ib_cfg	ib_cfg;
+
+	struct bfi_enet_tx_cfg	tx_cfg;
+};
+
+struct bfi_enet_tx_cfg_rsp {
+	struct		bfi_msgq_mhdr mh;
+	u8		error;
+	u8		hw_id;		/* For debugging */
+	u8		rsvd[2];
+	struct {
+		u32	q_dbell;	/* PCI base address offset */
+		u32	i_dbell;	/* PCI base address offset */
+		u8	hw_qid;		/* For debugging */
+		u8	rsvd[3];
+	} q_handles[BFI_ENET_TXQ_PRIO_MAX];
+};
+
+/**
+ * Rx Configuration
+ *
+ * bfi_enet_rx_cfg is used by:
+ *	BFI_ENET_H2I_RX_CFG_SET_REQ
+ */
+enum bfi_enet_rxq_type {
+	BFI_ENET_RXQ_SINGLE		= 1,
+	BFI_ENET_RXQ_LARGE_SMALL	= 2,
+	BFI_ENET_RXQ_HDS		= 3,
+	BFI_ENET_RXQ_HDS_OPT_BASED	= 4,
+};
+
+enum bfi_enet_hds_type {
+	BFI_ENET_HDS_FORCED	= 0x01,
+	BFI_ENET_HDS_IPV6_UDP	= 0x02,
+	BFI_ENET_HDS_IPV6_TCP	= 0x04,
+	BFI_ENET_HDS_IPV4_TCP	= 0x08,
+	BFI_ENET_HDS_IPV4_UDP	= 0x10,
+};
+
+struct bfi_enet_rx_cfg {
+	u8		rxq_type;
+	u8		rsvd[3];
+
+	struct {
+		u8			max_header_size;
+		u8			force_offset;
+		u8			type;
+		u8			rsvd1;
+	} hds;
+
+	u8		multi_buffer;
+	u8		strip_vlan;
+	u8		drop_untagged;
+	u8		rsvd2;
+};
+
+/*
+ * Multicast frames are received on the ql of q-set index zero.
+ * On the completion queue.  RxQ ID = even is for large/data buffer queues
+ * and RxQ ID = odd is for small/header buffer queues.
+ */
+struct bfi_enet_rx_cfg_req {
+	struct bfi_msgq_mhdr mh;
+	u8			num_queue_sets;	/* # of Rx Queue Sets */
+	u8			rsvd[3];
+
+	struct {
+		struct bfi_enet_rxq	ql;	/* large/data/single buffers */
+		struct bfi_enet_rxq	qs;	/* small/header buffers */
+		struct bfi_enet_cq	cq;
+		struct bfi_enet_ib	ib;
+	} q_cfg[BFI_ENET_RX_QSET_MAX];
+
+	struct bfi_enet_ib_cfg	ib_cfg;
+
+	struct bfi_enet_rx_cfg	rx_cfg;
+};
+
+struct bfi_enet_rx_cfg_rsp {
+	struct bfi_msgq_mhdr mh;
+	u8		error;
+	u8		hw_id;	 /* For debugging */
+	u8		rsvd[2];
+	struct {
+		u32	ql_dbell; /* PCI base address offset */
+		u32	qs_dbell; /* PCI base address offset */
+		u32	i_dbell;  /* PCI base address offset */
+		u8		hw_lqid;  /* For debugging */
+		u8		hw_sqid;  /* For debugging */
+		u8		hw_cqid;  /* For debugging */
+		u8		rsvd;
+	} q_handles[BFI_ENET_RX_QSET_MAX];
+};
+
+/**
+ * RIT
+ *
+ * bfi_enet_rit_req is used by:
+ *	BFI_ENET_H2I_RIT_CFG_REQ
+ */
+struct bfi_enet_rit_req {
+	struct	bfi_msgq_mhdr mh;
+	u16	size;			/* number of table-entries used */
+	u8	rsvd[2];
+	u8	table[BFI_ENET_RSS_RIT_MAX];
+};
+
+/**
+ * RSS
+ *
+ * bfi_enet_rss_cfg_req is used by:
+ *	BFI_ENET_H2I_RSS_CFG_REQ
+ */
+enum bfi_enet_rss_type {
+	BFI_ENET_RSS_IPV6	= 0x01,
+	BFI_ENET_RSS_IPV6_TCP	= 0x02,
+	BFI_ENET_RSS_IPV4	= 0x04,
+	BFI_ENET_RSS_IPV4_TCP	= 0x08
+};
+
+struct bfi_enet_rss_cfg {
+	u8	type;
+	u8	mask;
+	u8	rsvd[2];
+	u32	key[BFI_ENET_RSS_KEY_LEN];
+};
+
+struct bfi_enet_rss_cfg_req {
+	struct bfi_msgq_mhdr	mh;
+	struct bfi_enet_rss_cfg	cfg;
+};
+
+/**
+ * MAC Unicast
+ *
+ * bfi_enet_rx_vlan_req is used by:
+ *	BFI_ENET_H2I_MAC_UCAST_SET_REQ
+ *	BFI_ENET_H2I_MAC_UCAST_CLR_REQ
+ *	BFI_ENET_H2I_MAC_UCAST_ADD_REQ
+ *	BFI_ENET_H2I_MAC_UCAST_DEL_REQ
+ */
+struct bfi_enet_ucast_req {
+	struct bfi_msgq_mhdr	mh;
+	mac_t			mac_addr;
+	u8			rsvd[2];
+};
+
+/**
+ * MAC Unicast + VLAN
+ */
+struct bfi_enet_mac_n_vlan_req {
+	struct bfi_msgq_mhdr	mh;
+	u16			vlan_id;
+	mac_t			mac_addr;
+};
+
+/**
+ * MAC Multicast
+ *
+ * bfi_enet_mac_mfilter_add_req is used by:
+ *	BFI_ENET_H2I_MAC_MCAST_ADD_REQ
+ */
+struct bfi_enet_mcast_add_req {
+	struct bfi_msgq_mhdr	mh;
+	mac_t			mac_addr;
+	u8			rsvd[2];
+};
+
+/**
+ * bfi_enet_mac_mfilter_add_rsp is used by:
+ *	BFI_ENET_I2H_MAC_MCAST_ADD_RSP
+ */
+struct bfi_enet_mcast_add_rsp {
+	struct bfi_msgq_mhdr	mh;
+	u8			error;
+	u8			rsvd;
+	u16			cmd_offset;
+	u16			handle;
+	u8			rsvd1[2];
+};
+
+/**
+ * bfi_enet_mac_mfilter_del_req is used by:
+ *	BFI_ENET_H2I_MAC_MCAST_DEL_REQ
+ */
+struct bfi_enet_mcast_del_req {
+	struct bfi_msgq_mhdr	mh;
+	u16			handle;
+	u8			rsvd[2];
+};
+
+/**
+ * VLAN
+ *
+ * bfi_enet_rx_vlan_req is used by:
+ *	BFI_ENET_H2I_RX_VLAN_SET_REQ
+ */
+struct bfi_enet_rx_vlan_req {
+	struct bfi_msgq_mhdr	mh;
+	u8			block_idx;
+	u8			rsvd[3];
+	u32			bit_mask[BFI_ENET_VLAN_WORDS_MAX];
+};
+
+/**
+ * PAUSE
+ *
+ * bfi_enet_set_pause_req is used by:
+ *	BFI_ENET_H2I_SET_PAUSE_REQ
+ */
+struct bfi_enet_set_pause_req {
+	struct bfi_msgq_mhdr	mh;
+	u8			rsvd[2];
+	u8			tx_pause;	/* 1 = enable;  0 = disable */
+	u8			rx_pause;	/* 1 = enable;  0 = disable */
+};
+
+/**
+ * DIAGNOSTICS
+ *
+ * bfi_enet_diag_lb_req is used by:
+ *      BFI_ENET_H2I_DIAG_LOOPBACK
+ */
+struct bfi_enet_diag_lb_req {
+	struct bfi_msgq_mhdr	mh;
+	u8			rsvd[2];
+	u8			mode;		/* cable or Serdes */
+	u8			enable;		/* 1 = enable;  0 = disable */
+};
+
+/**
+ * enum for Loopback opmodes
+ */
+enum {
+	BFI_ENET_DIAG_LB_OPMODE_EXT = 0,
+	BFI_ENET_DIAG_LB_OPMODE_CBL = 1,
+};
+
+/**
+ * STATISTICS
+ *
+ * bfi_enet_stats_req is used by:
+ *    BFI_ENET_H2I_STATS_GET_REQ
+ *    BFI_ENET_I2H_STATS_CLR_REQ
+ */
+struct bfi_enet_stats_req {
+	struct bfi_msgq_mhdr	mh;
+	u16			stats_mask;
+	u8			rsvd[2];
+	u32			rx_enet_mask;
+	u32			tx_enet_mask;
+	union bfi_addr_u	host_buffer;
+};
+
+/**
+ * defines for "stats_mask" above.
+ */
+#define BFI_ENET_STATS_MAC    (1 << 0)    /* !< MAC Statistics */
+#define BFI_ENET_STATS_BPC    (1 << 1)    /* !< Pause Stats from BPC */
+#define BFI_ENET_STATS_RAD    (1 << 2)    /* !< Rx Admission Statistics */
+#define BFI_ENET_STATS_RX_FC  (1 << 3)    /* !< Rx FC Stats from RxA */
+#define BFI_ENET_STATS_TX_FC  (1 << 4)    /* !< Tx FC Stats from TxA */
+
+#define BFI_ENET_STATS_ALL    0x1f
+
+/* TxF Frame Statistics */
+struct bfi_enet_stats_txf {
+	u64 ucast_octets;
+	u64 ucast;
+	u64 ucast_vlan;
+
+	u64 mcast_octets;
+	u64 mcast;
+	u64 mcast_vlan;
+
+	u64 bcast_octets;
+	u64 bcast;
+	u64 bcast_vlan;
+
+	u64 errors;
+	u64 filter_vlan;      /* frames filtered due to VLAN */
+	u64 filter_mac_sa;    /* frames filtered due to SA check */
+};
+
+/* RxF Frame Statistics */
+struct bfi_enet_stats_rxf {
+	u64 ucast_octets;
+	u64 ucast;
+	u64 ucast_vlan;
+
+	u64 mcast_octets;
+	u64 mcast;
+	u64 mcast_vlan;
+
+	u64 bcast_octets;
+	u64 bcast;
+	u64 bcast_vlan;
+	u64 frame_drops;
+};
+
+/* FC Tx Frame Statistics */
+struct bfi_enet_stats_fc_tx {
+	u64 txf_ucast_octets;
+	u64 txf_ucast;
+	u64 txf_ucast_vlan;
+
+	u64 txf_mcast_octets;
+	u64 txf_mcast;
+	u64 txf_mcast_vlan;
+
+	u64 txf_bcast_octets;
+	u64 txf_bcast;
+	u64 txf_bcast_vlan;
+
+	u64 txf_parity_errors;
+	u64 txf_timeout;
+	u64 txf_fid_parity_errors;
+};
+
+/* FC Rx Frame Statistics */
+struct bfi_enet_stats_fc_rx {
+	u64 rxf_ucast_octets;
+	u64 rxf_ucast;
+	u64 rxf_ucast_vlan;
+
+	u64 rxf_mcast_octets;
+	u64 rxf_mcast;
+	u64 rxf_mcast_vlan;
+
+	u64 rxf_bcast_octets;
+	u64 rxf_bcast;
+	u64 rxf_bcast_vlan;
+};
+
+/* RAD Frame Statistics */
+struct bfi_enet_stats_rad {
+	u64 rx_frames;
+	u64 rx_octets;
+	u64 rx_vlan_frames;
+
+	u64 rx_ucast;
+	u64 rx_ucast_octets;
+	u64 rx_ucast_vlan;
+
+	u64 rx_mcast;
+	u64 rx_mcast_octets;
+	u64 rx_mcast_vlan;
+
+	u64 rx_bcast;
+	u64 rx_bcast_octets;
+	u64 rx_bcast_vlan;
+
+	u64 rx_drops;
+};
+
+/* BPC Tx Registers */
+struct bfi_enet_stats_bpc {
+	/* transmit stats */
+	u64 tx_pause[8];
+	u64 tx_zero_pause[8];	/*!< Pause cancellation */
+	/*!<Pause initiation rather than retention */
+	u64 tx_first_pause[8];
+
+	/* receive stats */
+	u64 rx_pause[8];
+	u64 rx_zero_pause[8];	/*!< Pause cancellation */
+	/*!<Pause initiation rather than retention */
+	u64 rx_first_pause[8];
+};
+
+/* MAC Rx Statistics */
+struct bfi_enet_stats_mac {
+	u64 frame_64;		/* both rx and tx counter */
+	u64 frame_65_127;		/* both rx and tx counter */
+	u64 frame_128_255;		/* both rx and tx counter */
+	u64 frame_256_511;		/* both rx and tx counter */
+	u64 frame_512_1023;	/* both rx and tx counter */
+	u64 frame_1024_1518;	/* both rx and tx counter */
+	u64 frame_1519_1522;	/* both rx and tx counter */
+
+	/* receive stats */
+	u64 rx_bytes;
+	u64 rx_packets;
+	u64 rx_fcs_error;
+	u64 rx_multicast;
+	u64 rx_broadcast;
+	u64 rx_control_frames;
+	u64 rx_pause;
+	u64 rx_unknown_opcode;
+	u64 rx_alignment_error;
+	u64 rx_frame_length_error;
+	u64 rx_code_error;
+	u64 rx_carrier_sense_error;
+	u64 rx_undersize;
+	u64 rx_oversize;
+	u64 rx_fragments;
+	u64 rx_jabber;
+	u64 rx_drop;
+
+	/* transmit stats */
+	u64 tx_bytes;
+	u64 tx_packets;
+	u64 tx_multicast;
+	u64 tx_broadcast;
+	u64 tx_pause;
+	u64 tx_deferral;
+	u64 tx_excessive_deferral;
+	u64 tx_single_collision;
+	u64 tx_muliple_collision;
+	u64 tx_late_collision;
+	u64 tx_excessive_collision;
+	u64 tx_total_collision;
+	u64 tx_pause_honored;
+	u64 tx_drop;
+	u64 tx_jabber;
+	u64 tx_fcs_error;
+	u64 tx_control_frame;
+	u64 tx_oversize;
+	u64 tx_undersize;
+	u64 tx_fragments;
+};
+
+/**
+ * Complete statistics, DMAed from fw to host followed by
+ * BFI_ENET_I2H_STATS_GET_RSP
+ */
+struct bfi_enet_stats {
+	struct bfi_enet_stats_mac	mac_stats;
+	struct bfi_enet_stats_bpc	bpc_stats;
+	struct bfi_enet_stats_rad	rad_stats;
+	struct bfi_enet_stats_rad	rlb_stats;
+	struct bfi_enet_stats_fc_rx	fc_rx_stats;
+	struct bfi_enet_stats_fc_tx	fc_tx_stats;
+	struct bfi_enet_stats_rxf	rxf_stats[BFI_ENET_CFG_MAX];
+	struct bfi_enet_stats_txf	txf_stats[BFI_ENET_CFG_MAX];
+};
+
+#pragma pack()
+
+#endif  /* __BFI_ENET_H__ */
diff --git a/drivers/net/ethernet/brocade/bna/bfi_reg.h b/drivers/net/ethernet/brocade/bna/bfi_reg.h
new file mode 100644
index 000000000000..efacff3ab51d
--- /dev/null
+++ b/drivers/net/ethernet/brocade/bna/bfi_reg.h
@@ -0,0 +1,452 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+/*
+ * bfi_reg.h ASIC register defines for all Brocade adapter ASICs
+ */
+
+#ifndef __BFI_REG_H__
+#define __BFI_REG_H__
+
+#define HOSTFN0_INT_STATUS		0x00014000	/* cb/ct	*/
+#define HOSTFN1_INT_STATUS		0x00014100	/* cb/ct	*/
+#define HOSTFN2_INT_STATUS		0x00014300	/* ct		*/
+#define HOSTFN3_INT_STATUS		0x00014400	/* ct		*/
+#define HOSTFN0_INT_MSK			0x00014004	/* cb/ct	*/
+#define HOSTFN1_INT_MSK			0x00014104	/* cb/ct	*/
+#define HOSTFN2_INT_MSK			0x00014304	/* ct		*/
+#define HOSTFN3_INT_MSK			0x00014404	/* ct		*/
+
+#define HOST_PAGE_NUM_FN0		0x00014008	/* cb/ct	*/
+#define HOST_PAGE_NUM_FN1		0x00014108	/* cb/ct	*/
+#define HOST_PAGE_NUM_FN2		0x00014308	/* ct		*/
+#define HOST_PAGE_NUM_FN3		0x00014408	/* ct		*/
+
+#define APP_PLL_LCLK_CTL_REG		0x00014204	/* cb/ct	*/
+#define __P_LCLK_PLL_LOCK		0x80000000
+#define __APP_PLL_LCLK_SRAM_USE_100MHZ	0x00100000
+#define __APP_PLL_LCLK_RESET_TIMER_MK	0x000e0000
+#define __APP_PLL_LCLK_RESET_TIMER_SH	17
+#define __APP_PLL_LCLK_RESET_TIMER(_v)	((_v) << __APP_PLL_LCLK_RESET_TIMER_SH)
+#define __APP_PLL_LCLK_LOGIC_SOFT_RESET	0x00010000
+#define __APP_PLL_LCLK_CNTLMT0_1_MK	0x0000c000
+#define __APP_PLL_LCLK_CNTLMT0_1_SH	14
+#define __APP_PLL_LCLK_CNTLMT0_1(_v)	((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH)
+#define __APP_PLL_LCLK_JITLMT0_1_MK	0x00003000
+#define __APP_PLL_LCLK_JITLMT0_1_SH	12
+#define __APP_PLL_LCLK_JITLMT0_1(_v)	((_v) << __APP_PLL_LCLK_JITLMT0_1_SH)
+#define __APP_PLL_LCLK_HREF		0x00000800
+#define __APP_PLL_LCLK_HDIV		0x00000400
+#define __APP_PLL_LCLK_P0_1_MK		0x00000300
+#define __APP_PLL_LCLK_P0_1_SH		8
+#define __APP_PLL_LCLK_P0_1(_v)		((_v) << __APP_PLL_LCLK_P0_1_SH)
+#define __APP_PLL_LCLK_Z0_2_MK		0x000000e0
+#define __APP_PLL_LCLK_Z0_2_SH		5
+#define __APP_PLL_LCLK_Z0_2(_v)		((_v) << __APP_PLL_LCLK_Z0_2_SH)
+#define __APP_PLL_LCLK_RSEL200500	0x00000010
+#define __APP_PLL_LCLK_ENARST		0x00000008
+#define __APP_PLL_LCLK_BYPASS		0x00000004
+#define __APP_PLL_LCLK_LRESETN		0x00000002
+#define __APP_PLL_LCLK_ENABLE		0x00000001
+#define APP_PLL_SCLK_CTL_REG		0x00014208	/* cb/ct	*/
+#define __P_SCLK_PLL_LOCK		0x80000000
+#define __APP_PLL_SCLK_RESET_TIMER_MK	0x000e0000
+#define __APP_PLL_SCLK_RESET_TIMER_SH	17
+#define __APP_PLL_SCLK_RESET_TIMER(_v)	((_v) << __APP_PLL_SCLK_RESET_TIMER_SH)
+#define __APP_PLL_SCLK_LOGIC_SOFT_RESET	0x00010000
+#define __APP_PLL_SCLK_CNTLMT0_1_MK	0x0000c000
+#define __APP_PLL_SCLK_CNTLMT0_1_SH	14
+#define __APP_PLL_SCLK_CNTLMT0_1(_v)	((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH)
+#define __APP_PLL_SCLK_JITLMT0_1_MK	0x00003000
+#define __APP_PLL_SCLK_JITLMT0_1_SH	12
+#define __APP_PLL_SCLK_JITLMT0_1(_v)	((_v) << __APP_PLL_SCLK_JITLMT0_1_SH)
+#define __APP_PLL_SCLK_HREF		0x00000800
+#define __APP_PLL_SCLK_HDIV		0x00000400
+#define __APP_PLL_SCLK_P0_1_MK		0x00000300
+#define __APP_PLL_SCLK_P0_1_SH		8
+#define __APP_PLL_SCLK_P0_1(_v)		((_v) << __APP_PLL_SCLK_P0_1_SH)
+#define __APP_PLL_SCLK_Z0_2_MK		0x000000e0
+#define __APP_PLL_SCLK_Z0_2_SH		5
+#define __APP_PLL_SCLK_Z0_2(_v)		((_v) << __APP_PLL_SCLK_Z0_2_SH)
+#define __APP_PLL_SCLK_RSEL200500	0x00000010
+#define __APP_PLL_SCLK_ENARST		0x00000008
+#define __APP_PLL_SCLK_BYPASS		0x00000004
+#define __APP_PLL_SCLK_LRESETN		0x00000002
+#define __APP_PLL_SCLK_ENABLE		0x00000001
+#define __ENABLE_MAC_AHB_1		0x00800000	/* ct		*/
+#define __ENABLE_MAC_AHB_0		0x00400000	/* ct		*/
+#define __ENABLE_MAC_1			0x00200000	/* ct		*/
+#define __ENABLE_MAC_0			0x00100000	/* ct		*/
+
+#define HOST_SEM0_REG			0x00014230	/* cb/ct	*/
+#define HOST_SEM1_REG			0x00014234	/* cb/ct	*/
+#define HOST_SEM2_REG			0x00014238	/* cb/ct	*/
+#define HOST_SEM3_REG			0x0001423c	/* cb/ct	*/
+#define HOST_SEM4_REG			0x00014610	/* cb/ct	*/
+#define HOST_SEM5_REG			0x00014614	/* cb/ct	*/
+#define HOST_SEM6_REG			0x00014618	/* cb/ct	*/
+#define HOST_SEM7_REG			0x0001461c	/* cb/ct	*/
+#define HOST_SEM0_INFO_REG		0x00014240	/* cb/ct	*/
+#define HOST_SEM1_INFO_REG		0x00014244	/* cb/ct	*/
+#define HOST_SEM2_INFO_REG		0x00014248	/* cb/ct	*/
+#define HOST_SEM3_INFO_REG		0x0001424c	/* cb/ct	*/
+#define HOST_SEM4_INFO_REG		0x00014620	/* cb/ct	*/
+#define HOST_SEM5_INFO_REG		0x00014624	/* cb/ct	*/
+#define HOST_SEM6_INFO_REG		0x00014628	/* cb/ct	*/
+#define HOST_SEM7_INFO_REG		0x0001462c	/* cb/ct	*/
+
+#define HOSTFN0_LPU0_CMD_STAT		0x00019000	/* cb/ct	*/
+#define HOSTFN0_LPU1_CMD_STAT		0x00019004	/* cb/ct	*/
+#define HOSTFN1_LPU0_CMD_STAT		0x00019010	/* cb/ct	*/
+#define HOSTFN1_LPU1_CMD_STAT		0x00019014	/* cb/ct	*/
+#define HOSTFN2_LPU0_CMD_STAT		0x00019150	/* ct		*/
+#define HOSTFN2_LPU1_CMD_STAT		0x00019154	/* ct		*/
+#define HOSTFN3_LPU0_CMD_STAT		0x00019160	/* ct		*/
+#define HOSTFN3_LPU1_CMD_STAT		0x00019164	/* ct		*/
+#define LPU0_HOSTFN0_CMD_STAT		0x00019008	/* cb/ct	*/
+#define LPU1_HOSTFN0_CMD_STAT		0x0001900c	/* cb/ct	*/
+#define LPU0_HOSTFN1_CMD_STAT		0x00019018	/* cb/ct	*/
+#define LPU1_HOSTFN1_CMD_STAT		0x0001901c	/* cb/ct	*/
+#define LPU0_HOSTFN2_CMD_STAT		0x00019158	/* ct		*/
+#define LPU1_HOSTFN2_CMD_STAT		0x0001915c	/* ct		*/
+#define LPU0_HOSTFN3_CMD_STAT		0x00019168	/* ct		*/
+#define LPU1_HOSTFN3_CMD_STAT		0x0001916c	/* ct		*/
+
+#define PSS_CTL_REG			0x00018800	/* cb/ct	*/
+#define __PSS_I2C_CLK_DIV_MK		0x007f0000
+#define __PSS_I2C_CLK_DIV_SH		16
+#define __PSS_I2C_CLK_DIV(_v)		((_v) << __PSS_I2C_CLK_DIV_SH)
+#define __PSS_LMEM_INIT_DONE		0x00001000
+#define __PSS_LMEM_RESET		0x00000200
+#define __PSS_LMEM_INIT_EN		0x00000100
+#define __PSS_LPU1_RESET		0x00000002
+#define __PSS_LPU0_RESET		0x00000001
+#define PSS_ERR_STATUS_REG		0x00018810	/* cb/ct	*/
+#define ERR_SET_REG			0x00018818	/* cb/ct	*/
+#define PSS_GPIO_OUT_REG		0x000188c0	/* cb/ct	*/
+#define __PSS_GPIO_OUT_REG		0x00000fff
+#define PSS_GPIO_OE_REG			0x000188c8	/* cb/ct	*/
+#define __PSS_GPIO_OE_REG		0x000000ff
+
+#define HOSTFN0_LPU_MBOX0_0		0x00019200	/* cb/ct	*/
+#define HOSTFN1_LPU_MBOX0_8		0x00019260	/* cb/ct	*/
+#define LPU_HOSTFN0_MBOX0_0		0x00019280	/* cb/ct	*/
+#define LPU_HOSTFN1_MBOX0_8		0x000192e0	/* cb/ct	*/
+#define HOSTFN2_LPU_MBOX0_0		0x00019400	/* ct		*/
+#define HOSTFN3_LPU_MBOX0_8		0x00019460	/* ct		*/
+#define LPU_HOSTFN2_MBOX0_0		0x00019480	/* ct		*/
+#define LPU_HOSTFN3_MBOX0_8		0x000194e0	/* ct		*/
+
+#define HOST_MSIX_ERR_INDEX_FN0		0x0001400c	/* ct		*/
+#define HOST_MSIX_ERR_INDEX_FN1		0x0001410c	/* ct		*/
+#define HOST_MSIX_ERR_INDEX_FN2		0x0001430c	/* ct		*/
+#define HOST_MSIX_ERR_INDEX_FN3		0x0001440c	/* ct		*/
+
+#define MBIST_CTL_REG			0x00014220	/* ct		*/
+#define __EDRAM_BISTR_START		0x00000004
+#define MBIST_STAT_REG			0x00014224	/* ct		*/
+#define ETH_MAC_SER_REG			0x00014288	/* ct		*/
+#define __APP_EMS_CKBUFAMPIN		0x00000020
+#define __APP_EMS_REFCLKSEL		0x00000010
+#define __APP_EMS_CMLCKSEL		0x00000008
+#define __APP_EMS_REFCKBUFEN2		0x00000004
+#define __APP_EMS_REFCKBUFEN1		0x00000002
+#define __APP_EMS_CHANNEL_SEL		0x00000001
+#define FNC_PERS_REG			0x00014604	/* ct		*/
+#define __F3_FUNCTION_ACTIVE		0x80000000
+#define __F3_FUNCTION_MODE		0x40000000
+#define __F3_PORT_MAP_MK		0x30000000
+#define __F3_PORT_MAP_SH		28
+#define __F3_PORT_MAP(_v)		((_v) << __F3_PORT_MAP_SH)
+#define __F3_VM_MODE			0x08000000
+#define __F3_INTX_STATUS_MK		0x07000000
+#define __F3_INTX_STATUS_SH		24
+#define __F3_INTX_STATUS(_v)		((_v) << __F3_INTX_STATUS_SH)
+#define __F2_FUNCTION_ACTIVE		0x00800000
+#define __F2_FUNCTION_MODE		0x00400000
+#define __F2_PORT_MAP_MK		0x00300000
+#define __F2_PORT_MAP_SH		20
+#define __F2_PORT_MAP(_v)		((_v) << __F2_PORT_MAP_SH)
+#define __F2_VM_MODE			0x00080000
+#define __F2_INTX_STATUS_MK		0x00070000
+#define __F2_INTX_STATUS_SH		16
+#define __F2_INTX_STATUS(_v)		((_v) << __F2_INTX_STATUS_SH)
+#define __F1_FUNCTION_ACTIVE		0x00008000
+#define __F1_FUNCTION_MODE		0x00004000
+#define __F1_PORT_MAP_MK		0x00003000
+#define __F1_PORT_MAP_SH		12
+#define __F1_PORT_MAP(_v)		((_v) << __F1_PORT_MAP_SH)
+#define __F1_VM_MODE			0x00000800
+#define __F1_INTX_STATUS_MK		0x00000700
+#define __F1_INTX_STATUS_SH		8
+#define __F1_INTX_STATUS(_v)		((_v) << __F1_INTX_STATUS_SH)
+#define __F0_FUNCTION_ACTIVE		0x00000080
+#define __F0_FUNCTION_MODE		0x00000040
+#define __F0_PORT_MAP_MK		0x00000030
+#define __F0_PORT_MAP_SH		4
+#define __F0_PORT_MAP(_v)		((_v) << __F0_PORT_MAP_SH)
+#define __F0_VM_MODE			0x00000008
+#define __F0_INTX_STATUS		0x00000007
+enum {
+	__F0_INTX_STATUS_MSIX = 0x0,
+	__F0_INTX_STATUS_INTA = 0x1,
+	__F0_INTX_STATUS_INTB = 0x2,
+	__F0_INTX_STATUS_INTC = 0x3,
+	__F0_INTX_STATUS_INTD = 0x4,
+};
+
+#define OP_MODE				0x0001460c
+#define __APP_ETH_CLK_LOWSPEED		0x00000004
+#define __GLOBAL_CORECLK_HALFSPEED	0x00000002
+#define __GLOBAL_FCOE_MODE		0x00000001
+#define FW_INIT_HALT_P0			0x000191ac
+#define __FW_INIT_HALT_P		0x00000001
+#define FW_INIT_HALT_P1			0x000191bc
+#define PMM_1T_RESET_REG_P0		0x0002381c
+#define __PMM_1T_RESET_P		0x00000001
+#define PMM_1T_RESET_REG_P1		0x00023c1c
+
+/**
+ * Brocade 1860 Adapter specific defines
+ */
+#define CT2_PCI_CPQ_BASE		0x00030000
+#define CT2_PCI_APP_BASE		0x00030100
+#define CT2_PCI_ETH_BASE		0x00030400
+
+/*
+ * APP block registers
+ */
+#define CT2_HOSTFN_INT_STATUS		(CT2_PCI_APP_BASE + 0x00)
+#define CT2_HOSTFN_INTR_MASK		(CT2_PCI_APP_BASE + 0x04)
+#define CT2_HOSTFN_PERSONALITY0		(CT2_PCI_APP_BASE + 0x08)
+#define __PME_STATUS_			0x00200000
+#define __PF_VF_BAR_SIZE_MODE__MK	0x00180000
+#define __PF_VF_BAR_SIZE_MODE__SH	19
+#define __PF_VF_BAR_SIZE_MODE_(_v)	((_v) << __PF_VF_BAR_SIZE_MODE__SH)
+#define __FC_LL_PORT_MAP__MK		0x00060000
+#define __FC_LL_PORT_MAP__SH		17
+#define __FC_LL_PORT_MAP_(_v)		((_v) << __FC_LL_PORT_MAP__SH)
+#define __PF_VF_ACTIVE_			0x00010000
+#define __PF_VF_CFG_RDY_		0x00008000
+#define __PF_VF_ENABLE_			0x00004000
+#define __PF_DRIVER_ACTIVE_		0x00002000
+#define __PF_PME_SEND_ENABLE_		0x00001000
+#define __PF_EXROM_OFFSET__MK		0x00000ff0
+#define __PF_EXROM_OFFSET__SH		4
+#define __PF_EXROM_OFFSET_(_v)		((_v) << __PF_EXROM_OFFSET__SH)
+#define __FC_LL_MODE_			0x00000008
+#define __PF_INTX_PIN_			0x00000007
+#define CT2_HOSTFN_PERSONALITY1		(CT2_PCI_APP_BASE + 0x0C)
+#define __PF_NUM_QUEUES1__MK		0xff000000
+#define __PF_NUM_QUEUES1__SH		24
+#define __PF_NUM_QUEUES1_(_v)		((_v) << __PF_NUM_QUEUES1__SH)
+#define __PF_VF_QUE_OFFSET1__MK		0x00ff0000
+#define __PF_VF_QUE_OFFSET1__SH		16
+#define __PF_VF_QUE_OFFSET1_(_v)	((_v) << __PF_VF_QUE_OFFSET1__SH)
+#define __PF_VF_NUM_QUEUES__MK		0x0000ff00
+#define __PF_VF_NUM_QUEUES__SH		8
+#define __PF_VF_NUM_QUEUES_(_v)		((_v) << __PF_VF_NUM_QUEUES__SH)
+#define __PF_VF_QUE_OFFSET_		0x000000ff
+#define CT2_HOSTFN_PAGE_NUM		(CT2_PCI_APP_BASE + 0x18)
+#define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR	(CT2_PCI_APP_BASE + 0x38)
+
+/*
+ * Brocade 1860 adapter CPQ block registers
+ */
+#define CT2_HOSTFN_LPU0_MBOX0		(CT2_PCI_CPQ_BASE + 0x00)
+#define CT2_HOSTFN_LPU1_MBOX0		(CT2_PCI_CPQ_BASE + 0x20)
+#define CT2_LPU0_HOSTFN_MBOX0		(CT2_PCI_CPQ_BASE + 0x40)
+#define CT2_LPU1_HOSTFN_MBOX0		(CT2_PCI_CPQ_BASE + 0x60)
+#define CT2_HOSTFN_LPU0_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x80)
+#define CT2_HOSTFN_LPU1_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x84)
+#define CT2_LPU0_HOSTFN_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x88)
+#define CT2_LPU1_HOSTFN_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x8c)
+#define CT2_HOSTFN_LPU0_READ_STAT	(CT2_PCI_CPQ_BASE + 0x90)
+#define CT2_HOSTFN_LPU1_READ_STAT	(CT2_PCI_CPQ_BASE + 0x94)
+#define CT2_LPU0_HOSTFN_MBOX0_MSK	(CT2_PCI_CPQ_BASE + 0x98)
+#define CT2_LPU1_HOSTFN_MBOX0_MSK	(CT2_PCI_CPQ_BASE + 0x9C)
+#define CT2_HOST_SEM0_REG		0x000148f0
+#define CT2_HOST_SEM1_REG		0x000148f4
+#define CT2_HOST_SEM2_REG		0x000148f8
+#define CT2_HOST_SEM3_REG		0x000148fc
+#define CT2_HOST_SEM4_REG		0x00014900
+#define CT2_HOST_SEM5_REG		0x00014904
+#define CT2_HOST_SEM6_REG		0x00014908
+#define CT2_HOST_SEM7_REG		0x0001490c
+#define CT2_HOST_SEM0_INFO_REG		0x000148b0
+#define CT2_HOST_SEM1_INFO_REG		0x000148b4
+#define CT2_HOST_SEM2_INFO_REG		0x000148b8
+#define CT2_HOST_SEM3_INFO_REG		0x000148bc
+#define CT2_HOST_SEM4_INFO_REG		0x000148c0
+#define CT2_HOST_SEM5_INFO_REG		0x000148c4
+#define CT2_HOST_SEM6_INFO_REG		0x000148c8
+#define CT2_HOST_SEM7_INFO_REG		0x000148cc
+
+#define CT2_APP_PLL_LCLK_CTL_REG	0x00014808
+#define __APP_LPUCLK_HALFSPEED		0x40000000
+#define __APP_PLL_LCLK_LOAD		0x20000000
+#define __APP_PLL_LCLK_FBCNT_MK		0x1fe00000
+#define __APP_PLL_LCLK_FBCNT_SH		21
+#define __APP_PLL_LCLK_FBCNT(_v)	((_v) << __APP_PLL_SCLK_FBCNT_SH)
+enum {
+	__APP_PLL_LCLK_FBCNT_425_MHZ = 6,
+	__APP_PLL_LCLK_FBCNT_468_MHZ = 4,
+};
+#define __APP_PLL_LCLK_EXTFB		0x00000800
+#define __APP_PLL_LCLK_ENOUTS		0x00000400
+#define __APP_PLL_LCLK_RATE		0x00000010
+#define CT2_APP_PLL_SCLK_CTL_REG	0x0001480c
+#define __P_SCLK_PLL_LOCK		0x80000000
+#define __APP_PLL_SCLK_REFCLK_SEL	0x40000000
+#define __APP_PLL_SCLK_CLK_DIV2		0x20000000
+#define __APP_PLL_SCLK_LOAD		0x10000000
+#define __APP_PLL_SCLK_FBCNT_MK		0x0ff00000
+#define __APP_PLL_SCLK_FBCNT_SH		20
+#define __APP_PLL_SCLK_FBCNT(_v)	((_v) << __APP_PLL_SCLK_FBCNT_SH)
+enum {
+	__APP_PLL_SCLK_FBCNT_NORM = 6,
+	__APP_PLL_SCLK_FBCNT_10G_FC = 10,
+};
+#define __APP_PLL_SCLK_EXTFB		0x00000800
+#define __APP_PLL_SCLK_ENOUTS		0x00000400
+#define __APP_PLL_SCLK_RATE		0x00000010
+#define CT2_PCIE_MISC_REG		0x00014804
+#define __ETH_CLK_ENABLE_PORT1		0x00000010
+#define CT2_CHIP_MISC_PRG		0x000148a4
+#define __ETH_CLK_ENABLE_PORT0		0x00004000
+#define __APP_LPU_SPEED			0x00000002
+#define CT2_MBIST_STAT_REG		0x00014818
+#define CT2_MBIST_CTL_REG		0x0001481c
+#define CT2_PMM_1T_CONTROL_REG_P0	0x0002381c
+#define __PMM_1T_PNDB_P			0x00000002
+#define CT2_PMM_1T_CONTROL_REG_P1	0x00023c1c
+#define CT2_WGN_STATUS			0x00014990
+#define __A2T_AHB_LOAD			0x00000800
+#define __WGN_READY			0x00000400
+#define __GLBL_PF_VF_CFG_RDY		0x00000200
+#define CT2_NFC_CSR_SET_REG		0x00027424
+#define __HALT_NFC_CONTROLLER		0x00000002
+#define __NFC_CONTROLLER_HALTED		0x00001000
+
+#define CT2_CSI_MAC0_CONTROL_REG	0x000270d0
+#define __CSI_MAC_RESET			0x00000010
+#define __CSI_MAC_AHB_RESET		0x00000008
+#define CT2_CSI_MAC1_CONTROL_REG	0x000270d4
+#define CT2_CSI_MAC_CONTROL_REG(__n) \
+	(CT2_CSI_MAC0_CONTROL_REG + \
+	(__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))
+
+/*
+ * Name semaphore registers based on usage
+ */
+#define BFA_IOC0_HBEAT_REG		HOST_SEM0_INFO_REG
+#define BFA_IOC0_STATE_REG		HOST_SEM1_INFO_REG
+#define BFA_IOC1_HBEAT_REG		HOST_SEM2_INFO_REG
+#define BFA_IOC1_STATE_REG		HOST_SEM3_INFO_REG
+#define BFA_FW_USE_COUNT		HOST_SEM4_INFO_REG
+#define BFA_IOC_FAIL_SYNC		HOST_SEM5_INFO_REG
+
+/*
+ * CT2 semaphore register locations changed
+ */
+#define CT2_BFA_IOC0_HBEAT_REG		CT2_HOST_SEM0_INFO_REG
+#define CT2_BFA_IOC0_STATE_REG		CT2_HOST_SEM1_INFO_REG
+#define CT2_BFA_IOC1_HBEAT_REG		CT2_HOST_SEM2_INFO_REG
+#define CT2_BFA_IOC1_STATE_REG		CT2_HOST_SEM3_INFO_REG
+#define CT2_BFA_FW_USE_COUNT		CT2_HOST_SEM4_INFO_REG
+#define CT2_BFA_IOC_FAIL_SYNC		CT2_HOST_SEM5_INFO_REG
+
+#define CPE_Q_NUM(__fn, __q)	(((__fn) << 2) + (__q))
+#define RME_Q_NUM(__fn, __q)	(((__fn) << 2) + (__q))
+
+/*
+ * And corresponding host interrupt status bit field defines
+ */
+#define __HFN_INT_CPE_Q0	0x00000001U
+#define __HFN_INT_CPE_Q1	0x00000002U
+#define __HFN_INT_CPE_Q2	0x00000004U
+#define __HFN_INT_CPE_Q3	0x00000008U
+#define __HFN_INT_CPE_Q4	0x00000010U
+#define __HFN_INT_CPE_Q5	0x00000020U
+#define __HFN_INT_CPE_Q6	0x00000040U
+#define __HFN_INT_CPE_Q7	0x00000080U
+#define __HFN_INT_RME_Q0	0x00000100U
+#define __HFN_INT_RME_Q1	0x00000200U
+#define __HFN_INT_RME_Q2	0x00000400U
+#define __HFN_INT_RME_Q3	0x00000800U
+#define __HFN_INT_RME_Q4	0x00001000U
+#define __HFN_INT_RME_Q5	0x00002000U
+#define __HFN_INT_RME_Q6	0x00004000U
+#define __HFN_INT_RME_Q7	0x00008000U
+#define __HFN_INT_ERR_EMC	0x00010000U
+#define __HFN_INT_ERR_LPU0	0x00020000U
+#define __HFN_INT_ERR_LPU1	0x00040000U
+#define __HFN_INT_ERR_PSS	0x00080000U
+#define __HFN_INT_MBOX_LPU0	0x00100000U
+#define __HFN_INT_MBOX_LPU1	0x00200000U
+#define __HFN_INT_MBOX1_LPU0	0x00400000U
+#define __HFN_INT_MBOX1_LPU1	0x00800000U
+#define __HFN_INT_LL_HALT	0x01000000U
+#define __HFN_INT_CPE_MASK	0x000000ffU
+#define __HFN_INT_RME_MASK	0x0000ff00U
+#define __HFN_INT_ERR_MASK	\
+	(__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \
+	 __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT)
+#define __HFN_INT_FN0_MASK	\
+	(__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
+	 __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
+	 __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0)
+#define __HFN_INT_FN1_MASK	\
+	(__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
+	 __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
+	 __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1)
+
+/*
+ * Host interrupt status defines for 1860
+ */
+#define __HFN_INT_MBOX_LPU0_CT2	0x00010000U
+#define __HFN_INT_MBOX_LPU1_CT2	0x00020000U
+#define __HFN_INT_ERR_PSS_CT2	0x00040000U
+#define __HFN_INT_ERR_LPU0_CT2	0x00080000U
+#define __HFN_INT_ERR_LPU1_CT2	0x00100000U
+#define __HFN_INT_CPQ_HALT_CT2	0x00200000U
+#define __HFN_INT_ERR_WGN_CT2	0x00400000U
+#define __HFN_INT_ERR_LEHRX_CT2	0x00800000U
+#define __HFN_INT_ERR_LEHTX_CT2	0x01000000U
+#define __HFN_INT_ERR_MASK_CT2	\
+	(__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \
+	 __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \
+	 __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \
+	 __HFN_INT_ERR_LEHTX_CT2)
+#define __HFN_INT_FN0_MASK_CT2	\
+	(__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
+	 __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
+	 __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2)
+#define __HFN_INT_FN1_MASK_CT2	\
+	(__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
+	 __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
+	 __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2)
+
+/*
+ * asic memory map.
+ */
+#define PSS_SMEM_PAGE_START		0x8000
+#define PSS_SMEM_PGNUM(_pg0, _ma)	((_pg0) + ((_ma) >> 15))
+#define PSS_SMEM_PGOFF(_ma)		((_ma) & 0x7fff)
+
+#endif /* __BFI_REG_H__ */
diff --git a/drivers/net/bna/bna.h b/drivers/net/ethernet/brocade/bna/bna.h
index 21e9155d6e56..2a587c5fdc20 100644
--- a/drivers/net/bna/bna.h
+++ b/drivers/net/ethernet/brocade/bna/bna.h
@@ -16,7 +16,6 @@
 #include "bfa_cs.h"
 #include "bfa_ioc.h"
 #include "cna.h"
-#include "bfi_ll.h"
 #include "bna_types.h"
 
 extern const u32 bna_napi_dim_vector[][BNA_BIAS_T_MAX];
@@ -32,15 +31,7 @@ extern const u32 bna_napi_dim_vector[][BNA_BIAS_T_MAX];
 /* Log string size */
 #define BNA_MESSAGE_SIZE		256
 
-/* MBOX API for PORT, TX, RX */
-#define bna_mbox_qe_fill(_qe, _cmd, _cmd_len, _cbfn, _cbarg)		\
-do {									\
-	memcpy(&((_qe)->cmd.msg[0]), (_cmd), (_cmd_len));	\
-	(_qe)->cbfn = (_cbfn);						\
-	(_qe)->cbarg = (_cbarg);					\
-} while (0)
-
-#define bna_is_small_rxq(rcb) ((rcb)->id == 1)
+#define bna_is_small_rxq(_id) ((_id) & 0x1)
 
 #define BNA_MAC_IS_EQUAL(_mac1, _mac2)					\
 	(!memcmp((_mac1), (_mac2), sizeof(mac_t)))
@@ -177,32 +168,6 @@ do {								\
 #define BNA_Q_IN_USE_COUNT(_q_ptr)					\
 	(BNA_QE_IN_USE_CNT(&(_q_ptr)->q, (_q_ptr)->q.q_depth))
 
-/* These macros build the data portion of the TxQ/RxQ doorbell */
-#define BNA_DOORBELL_Q_PRD_IDX(_pi)	(0x80000000 | (_pi))
-#define BNA_DOORBELL_Q_STOP		(0x40000000)
-
-/* These macros build the data portion of the IB doorbell */
-#define BNA_DOORBELL_IB_INT_ACK(_timeout, _events) \
-	(0x80000000 | ((_timeout) << 16) | (_events))
-#define BNA_DOORBELL_IB_INT_DISABLE	(0x40000000)
-
-/* Set the coalescing timer for the given ib */
-#define bna_ib_coalescing_timer_set(_i_dbell, _cls_timer)		\
-	((_i_dbell)->doorbell_ack = BNA_DOORBELL_IB_INT_ACK((_cls_timer), 0));
-
-/* Acks 'events' # of events for a given ib */
-#define bna_ib_ack(_i_dbell, _events)					\
-	(writel(((_i_dbell)->doorbell_ack | (_events)), \
-		(_i_dbell)->doorbell_addr));
-
-#define bna_txq_prod_indx_doorbell(_tcb)				\
-	(writel(BNA_DOORBELL_Q_PRD_IDX((_tcb)->producer_index), \
-		(_tcb)->q_dbell));
-
-#define bna_rxq_prod_indx_doorbell(_rcb)				\
-	(writel(BNA_DOORBELL_Q_PRD_IDX((_rcb)->producer_index), \
-		(_rcb)->q_dbell));
-
 #define BNA_LARGE_PKT_SIZE		1000
 
 #define BNA_UPDATE_PKT_CNT(_pkt, _len)					\
@@ -214,38 +179,59 @@ do {									\
 	}								\
 } while (0)
 
-#define	call_rxf_stop_cbfn(rxf, status)					\
+#define	call_rxf_stop_cbfn(rxf)						\
+do {									\
 	if ((rxf)->stop_cbfn) {						\
-		(*(rxf)->stop_cbfn)((rxf)->stop_cbarg, (status));	\
+		void (*cbfn)(struct bna_rx *);			\
+		struct bna_rx *cbarg;					\
+		cbfn = (rxf)->stop_cbfn;				\
+		cbarg = (rxf)->stop_cbarg;				\
 		(rxf)->stop_cbfn = NULL;				\
 		(rxf)->stop_cbarg = NULL;				\
-	}
+		cbfn(cbarg);						\
+	}								\
+} while (0)
 
-#define	call_rxf_start_cbfn(rxf, status)				\
+#define	call_rxf_start_cbfn(rxf)					\
+do {									\
 	if ((rxf)->start_cbfn) {					\
-		(*(rxf)->start_cbfn)((rxf)->start_cbarg, (status));	\
+		void (*cbfn)(struct bna_rx *);			\
+		struct bna_rx *cbarg;					\
+		cbfn = (rxf)->start_cbfn;				\
+		cbarg = (rxf)->start_cbarg;				\
 		(rxf)->start_cbfn = NULL;				\
 		(rxf)->start_cbarg = NULL;				\
-	}
+		cbfn(cbarg);						\
+	}								\
+} while (0)
 
-#define	call_rxf_cam_fltr_cbfn(rxf, status)				\
+#define	call_rxf_cam_fltr_cbfn(rxf)					\
+do {									\
 	if ((rxf)->cam_fltr_cbfn) {					\
-		(*(rxf)->cam_fltr_cbfn)((rxf)->cam_fltr_cbarg, rxf->rx,	\
-					(status));			\
+		void (*cbfn)(struct bnad *, struct bna_rx *);	\
+		struct bnad *cbarg;					\
+		cbfn = (rxf)->cam_fltr_cbfn;				\
+		cbarg = (rxf)->cam_fltr_cbarg;				\
 		(rxf)->cam_fltr_cbfn = NULL;				\
 		(rxf)->cam_fltr_cbarg = NULL;				\
-	}
+		cbfn(cbarg, rxf->rx);					\
+	}								\
+} while (0)
 
-#define	call_rxf_pause_cbfn(rxf, status)				\
+#define	call_rxf_pause_cbfn(rxf)					\
+do {									\
 	if ((rxf)->oper_state_cbfn) {					\
-		(*(rxf)->oper_state_cbfn)((rxf)->oper_state_cbarg, rxf->rx,\
-					(status));			\
-		(rxf)->rxf_flags &= ~BNA_RXF_FL_OPERSTATE_CHANGED;	\
+		void (*cbfn)(struct bnad *, struct bna_rx *);	\
+		struct bnad *cbarg;					\
+		cbfn = (rxf)->oper_state_cbfn;				\
+		cbarg = (rxf)->oper_state_cbarg;			\
 		(rxf)->oper_state_cbfn = NULL;				\
 		(rxf)->oper_state_cbarg = NULL;				\
-	}
+		cbfn(cbarg, rxf->rx);					\
+	}								\
+} while (0)
 
-#define	call_rxf_resume_cbfn(rxf, status) call_rxf_pause_cbfn(rxf, status)
+#define	call_rxf_resume_cbfn(rxf) call_rxf_pause_cbfn(rxf)
 
 #define is_xxx_enable(mode, bitmask, xxx) ((bitmask & xxx) && (mode & xxx))
 
@@ -331,6 +317,61 @@ do {									\
 	}								\
 } while (0)
 
+#define bna_tx_rid_mask(_bna) ((_bna)->tx_mod.rid_mask)
+
+#define bna_rx_rid_mask(_bna) ((_bna)->rx_mod.rid_mask)
+
+#define bna_tx_from_rid(_bna, _rid, _tx)				\
+do {								    \
+	struct bna_tx_mod *__tx_mod = &(_bna)->tx_mod;	  \
+	struct bna_tx *__tx;					    \
+	struct list_head *qe;					   \
+	_tx = NULL;						     \
+	list_for_each(qe, &__tx_mod->tx_active_q) {		     \
+		__tx = (struct bna_tx *)qe;			     \
+		if (__tx->rid == (_rid)) {			      \
+			(_tx) = __tx;				   \
+			break;					  \
+		}						       \
+	}							       \
+} while (0)
+
+#define bna_rx_from_rid(_bna, _rid, _rx)				\
+do {									\
+	struct bna_rx_mod *__rx_mod = &(_bna)->rx_mod;			\
+	struct bna_rx *__rx;						\
+	struct list_head *qe;						\
+	_rx = NULL;							\
+	list_for_each(qe, &__rx_mod->rx_active_q) {			\
+		__rx = (struct bna_rx *)qe;				\
+		if (__rx->rid == (_rid)) {				\
+			(_rx) = __rx;					\
+			break;						\
+		}							\
+	}								\
+} while (0)
+
+/**
+ *
+ *  Inline functions
+ *
+ */
+
+static inline struct bna_mac *bna_mac_find(struct list_head *q, u8 *addr)
+{
+	struct bna_mac *mac = NULL;
+	struct list_head *qe;
+	list_for_each(qe, q) {
+		if (BNA_MAC_IS_EQUAL(((struct bna_mac *)qe)->addr, addr)) {
+			mac = (struct bna_mac *)qe;
+			break;
+		}
+	}
+	return mac;
+}
+
+#define bna_attr(_bna) (&(_bna)->ioceth.attr)
+
 /**
  *
  * Function prototypes
@@ -341,17 +382,24 @@ do {									\
  * BNA
  */
 
+/* FW response handlers */
+void bna_bfi_stats_clr_rsp(struct bna *bna, struct bfi_msgq_mhdr *msghdr);
+
 /* APIs for BNAD */
 void bna_res_req(struct bna_res_info *res_info);
+void bna_mod_res_req(struct bna *bna, struct bna_res_info *res_info);
 void bna_init(struct bna *bna, struct bnad *bnad,
 			struct bfa_pcidev *pcidev,
 			struct bna_res_info *res_info);
+void bna_mod_init(struct bna *bna, struct bna_res_info *res_info);
 void bna_uninit(struct bna *bna);
+int bna_num_txq_set(struct bna *bna, int num_txq);
+int bna_num_rxp_set(struct bna *bna, int num_rxp);
 void bna_stats_get(struct bna *bna);
 void bna_get_perm_mac(struct bna *bna, u8 *mac);
+void bna_hw_stats_get(struct bna *bna);
 
 /* APIs for Rx */
-int bna_rit_mod_can_satisfy(struct bna_rit_mod *rit_mod, int seg_size);
 
 /* APIs for RxF */
 struct bna_mac *bna_ucam_mod_mac_get(struct bna_ucam_mod *ucam_mod);
@@ -360,79 +408,44 @@ void bna_ucam_mod_mac_put(struct bna_ucam_mod *ucam_mod,
 struct bna_mac *bna_mcam_mod_mac_get(struct bna_mcam_mod *mcam_mod);
 void bna_mcam_mod_mac_put(struct bna_mcam_mod *mcam_mod,
 			  struct bna_mac *mac);
-struct bna_rit_segment *
-bna_rit_mod_seg_get(struct bna_rit_mod *rit_mod, int seg_size);
-void bna_rit_mod_seg_put(struct bna_rit_mod *rit_mod,
-			struct bna_rit_segment *seg);
-
-/**
- * DEVICE
- */
-
-/* APIs for BNAD */
-void bna_device_enable(struct bna_device *device);
-void bna_device_disable(struct bna_device *device,
-			enum bna_cleanup_type type);
+struct bna_mcam_handle *bna_mcam_mod_handle_get(struct bna_mcam_mod *mod);
+void bna_mcam_mod_handle_put(struct bna_mcam_mod *mcam_mod,
+			  struct bna_mcam_handle *handle);
 
 /**
  * MBOX
  */
 
-/* APIs for PORT, TX, RX */
-void bna_mbox_handler(struct bna *bna, u32 intr_status);
-void bna_mbox_send(struct bna *bna, struct bna_mbox_qe *mbox_qe);
-
-/**
- * PORT
- */
-
-/* API for RX */
-int bna_port_mtu_get(struct bna_port *port);
-void bna_llport_rx_started(struct bna_llport *llport);
-void bna_llport_rx_stopped(struct bna_llport *llport);
-
 /* API for BNAD */
-void bna_port_enable(struct bna_port *port);
-void bna_port_disable(struct bna_port *port, enum bna_cleanup_type type,
-		      void (*cbfn)(void *, enum bna_cb_status));
-void bna_port_pause_config(struct bna_port *port,
-			   struct bna_pause_config *pause_config,
-			   void (*cbfn)(struct bnad *, enum bna_cb_status));
-void bna_port_mtu_set(struct bna_port *port, int mtu,
-		      void (*cbfn)(struct bnad *, enum bna_cb_status));
-void bna_port_mac_get(struct bna_port *port, mac_t *mac);
-
-/* Callbacks for TX, RX */
-void bna_port_cb_tx_stopped(struct bna_port *port,
-			    enum bna_cb_status status);
-void bna_port_cb_rx_stopped(struct bna_port *port,
-			    enum bna_cb_status status);
+void bna_mbox_handler(struct bna *bna, u32 intr_status);
 
 /**
- * IB
+ * ETHPORT
  */
 
-/* APIs for BNA */
-void bna_ib_mod_init(struct bna_ib_mod *ib_mod, struct bna *bna,
-		     struct bna_res_info *res_info);
-void bna_ib_mod_uninit(struct bna_ib_mod *ib_mod);
+/* Callbacks for RX */
+void bna_ethport_cb_rx_started(struct bna_ethport *ethport);
+void bna_ethport_cb_rx_stopped(struct bna_ethport *ethport);
 
 /**
  * TX MODULE AND TX
  */
+/* FW response handelrs */
+void bna_bfi_tx_enet_start_rsp(struct bna_tx *tx,
+			       struct bfi_msgq_mhdr *msghdr);
+void bna_bfi_tx_enet_stop_rsp(struct bna_tx *tx,
+			      struct bfi_msgq_mhdr *msghdr);
+void bna_bfi_bw_update_aen(struct bna_tx_mod *tx_mod);
 
 /* APIs for BNA */
 void bna_tx_mod_init(struct bna_tx_mod *tx_mod, struct bna *bna,
 		     struct bna_res_info *res_info);
 void bna_tx_mod_uninit(struct bna_tx_mod *tx_mod);
-int bna_tx_state_get(struct bna_tx *tx);
 
-/* APIs for PORT */
+/* APIs for ENET */
 void bna_tx_mod_start(struct bna_tx_mod *tx_mod, enum bna_tx_type type);
 void bna_tx_mod_stop(struct bna_tx_mod *tx_mod, enum bna_tx_type type);
 void bna_tx_mod_fail(struct bna_tx_mod *tx_mod);
-void bna_tx_mod_prio_changed(struct bna_tx_mod *tx_mod, int prio);
-void bna_tx_mod_cee_link_status(struct bna_tx_mod *tx_mod, int cee_link);
 
 /* APIs for BNAD */
 void bna_tx_res_req(int num_txq, int txq_depth,
@@ -444,43 +457,29 @@ struct bna_tx *bna_tx_create(struct bna *bna, struct bnad *bnad,
 void bna_tx_destroy(struct bna_tx *tx);
 void bna_tx_enable(struct bna_tx *tx);
 void bna_tx_disable(struct bna_tx *tx, enum bna_cleanup_type type,
-		    void (*cbfn)(void *, struct bna_tx *,
-				 enum bna_cb_status));
+		    void (*cbfn)(void *, struct bna_tx *));
+void bna_tx_cleanup_complete(struct bna_tx *tx);
 void bna_tx_coalescing_timeo_set(struct bna_tx *tx, int coalescing_timeo);
 
 /**
  * RX MODULE, RX, RXF
  */
 
-/* Internal APIs */
-void rxf_cb_cam_fltr_mbox_cmd(void *arg, int status);
-void rxf_cam_mbox_cmd(struct bna_rxf *rxf, u8 cmd,
-		const struct bna_mac *mac_addr);
-void __rxf_vlan_filter_set(struct bna_rxf *rxf, enum bna_status status);
-void bna_rxf_adv_init(struct bna_rxf *rxf,
-		struct bna_rx *rx,
-		struct bna_rx_config *q_config);
-int rxf_process_packet_filter_ucast(struct bna_rxf *rxf);
-int rxf_process_packet_filter_promisc(struct bna_rxf *rxf);
-int rxf_process_packet_filter_default(struct bna_rxf *rxf);
-int rxf_process_packet_filter_allmulti(struct bna_rxf *rxf);
-int rxf_clear_packet_filter_ucast(struct bna_rxf *rxf);
-int rxf_clear_packet_filter_promisc(struct bna_rxf *rxf);
-int rxf_clear_packet_filter_default(struct bna_rxf *rxf);
-int rxf_clear_packet_filter_allmulti(struct bna_rxf *rxf);
-void rxf_reset_packet_filter_ucast(struct bna_rxf *rxf);
-void rxf_reset_packet_filter_promisc(struct bna_rxf *rxf);
-void rxf_reset_packet_filter_default(struct bna_rxf *rxf);
-void rxf_reset_packet_filter_allmulti(struct bna_rxf *rxf);
+/* FW response handlers */
+void bna_bfi_rx_enet_start_rsp(struct bna_rx *rx,
+			       struct bfi_msgq_mhdr *msghdr);
+void bna_bfi_rx_enet_stop_rsp(struct bna_rx *rx,
+			      struct bfi_msgq_mhdr *msghdr);
+void bna_bfi_rxf_cfg_rsp(struct bna_rxf *rxf, struct bfi_msgq_mhdr *msghdr);
+void bna_bfi_rxf_mcast_add_rsp(struct bna_rxf *rxf,
+			       struct bfi_msgq_mhdr *msghdr);
 
 /* APIs for BNA */
 void bna_rx_mod_init(struct bna_rx_mod *rx_mod, struct bna *bna,
 		     struct bna_res_info *res_info);
 void bna_rx_mod_uninit(struct bna_rx_mod *rx_mod);
-int bna_rx_state_get(struct bna_rx *rx);
-int bna_rxf_state_get(struct bna_rxf *rxf);
 
-/* APIs for PORT */
+/* APIs for ENET */
 void bna_rx_mod_start(struct bna_rx_mod *rx_mod, enum bna_rx_type type);
 void bna_rx_mod_stop(struct bna_rx_mod *rx_mod, enum bna_rx_type type);
 void bna_rx_mod_fail(struct bna_rx_mod *rx_mod);
@@ -495,54 +494,86 @@ struct bna_rx *bna_rx_create(struct bna *bna, struct bnad *bnad,
 void bna_rx_destroy(struct bna_rx *rx);
 void bna_rx_enable(struct bna_rx *rx);
 void bna_rx_disable(struct bna_rx *rx, enum bna_cleanup_type type,
-		    void (*cbfn)(void *, struct bna_rx *,
-				 enum bna_cb_status));
+		    void (*cbfn)(void *, struct bna_rx *));
+void bna_rx_cleanup_complete(struct bna_rx *rx);
 void bna_rx_coalescing_timeo_set(struct bna_rx *rx, int coalescing_timeo);
 void bna_rx_dim_reconfig(struct bna *bna, const u32 vector[][BNA_BIAS_T_MAX]);
 void bna_rx_dim_update(struct bna_ccb *ccb);
 enum bna_cb_status
 bna_rx_ucast_set(struct bna_rx *rx, u8 *ucmac,
-		 void (*cbfn)(struct bnad *, struct bna_rx *,
-			      enum bna_cb_status));
+		 void (*cbfn)(struct bnad *, struct bna_rx *));
+enum bna_cb_status
+bna_rx_ucast_add(struct bna_rx *rx, u8* ucmac,
+		 void (*cbfn)(struct bnad *, struct bna_rx *));
+enum bna_cb_status
+bna_rx_ucast_del(struct bna_rx *rx, u8 *ucmac,
+		 void (*cbfn)(struct bnad *, struct bna_rx *));
 enum bna_cb_status
 bna_rx_mcast_add(struct bna_rx *rx, u8 *mcmac,
-		 void (*cbfn)(struct bnad *, struct bna_rx *,
-			      enum bna_cb_status));
+		 void (*cbfn)(struct bnad *, struct bna_rx *));
 enum bna_cb_status
 bna_rx_mcast_listset(struct bna_rx *rx, int count, u8 *mcmac,
-		     void (*cbfn)(struct bnad *, struct bna_rx *,
-				  enum bna_cb_status));
+		     void (*cbfn)(struct bnad *, struct bna_rx *));
 enum bna_cb_status
 bna_rx_mode_set(struct bna_rx *rx, enum bna_rxmode rxmode,
 		enum bna_rxmode bitmask,
-		void (*cbfn)(struct bnad *, struct bna_rx *,
-			     enum bna_cb_status));
+		void (*cbfn)(struct bnad *, struct bna_rx *));
 void bna_rx_vlan_add(struct bna_rx *rx, int vlan_id);
 void bna_rx_vlan_del(struct bna_rx *rx, int vlan_id);
 void bna_rx_vlanfilter_enable(struct bna_rx *rx);
-void bna_rx_hds_enable(struct bna_rx *rx, struct bna_rxf_hds *hds_config,
-		       void (*cbfn)(struct bnad *, struct bna_rx *,
-				    enum bna_cb_status));
+void bna_rx_hds_enable(struct bna_rx *rx, struct bna_hds_config *hds_config,
+		       void (*cbfn)(struct bnad *, struct bna_rx *));
 void bna_rx_hds_disable(struct bna_rx *rx,
-			void (*cbfn)(struct bnad *, struct bna_rx *,
-				     enum bna_cb_status));
+			void (*cbfn)(struct bnad *, struct bna_rx *));
+
+/**
+ * ENET
+ */
+
+/* API for RX */
+int bna_enet_mtu_get(struct bna_enet *enet);
+
+/* Callbacks for TX, RX */
+void bna_enet_cb_tx_stopped(struct bna_enet *enet);
+void bna_enet_cb_rx_stopped(struct bna_enet *enet);
+
+/* API for BNAD */
+void bna_enet_enable(struct bna_enet *enet);
+void bna_enet_disable(struct bna_enet *enet, enum bna_cleanup_type type,
+		      void (*cbfn)(void *));
+void bna_enet_pause_config(struct bna_enet *enet,
+			   struct bna_pause_config *pause_config,
+			   void (*cbfn)(struct bnad *));
+void bna_enet_mtu_set(struct bna_enet *enet, int mtu,
+		      void (*cbfn)(struct bnad *));
+void bna_enet_perm_mac_get(struct bna_enet *enet, mac_t *mac);
+
+/**
+ * IOCETH
+ */
+
+/* APIs for BNAD */
+void bna_ioceth_enable(struct bna_ioceth *ioceth);
+void bna_ioceth_disable(struct bna_ioceth *ioceth,
+			enum bna_cleanup_type type);
 
 /**
  * BNAD
  */
 
+/* Callbacks for ENET */
+void bnad_cb_ethport_link_status(struct bnad *bnad,
+			      enum bna_link_status status);
+
+/* Callbacks for IOCETH */
+void bnad_cb_ioceth_ready(struct bnad *bnad);
+void bnad_cb_ioceth_failed(struct bnad *bnad);
+void bnad_cb_ioceth_disabled(struct bnad *bnad);
+void bnad_cb_mbox_intr_enable(struct bnad *bnad);
+void bnad_cb_mbox_intr_disable(struct bnad *bnad);
+
 /* Callbacks for BNA */
 void bnad_cb_stats_get(struct bnad *bnad, enum bna_cb_status status,
 		       struct bna_stats *stats);
 
-/* Callbacks for DEVICE */
-void bnad_cb_device_enabled(struct bnad *bnad, enum bna_cb_status status);
-void bnad_cb_device_disabled(struct bnad *bnad, enum bna_cb_status status);
-void bnad_cb_device_enable_mbox_intr(struct bnad *bnad);
-void bnad_cb_device_disable_mbox_intr(struct bnad *bnad);
-
-/* Callbacks for port */
-void bnad_cb_port_link_status(struct bnad *bnad,
-			      enum bna_link_status status);
-
 #endif  /* __BNA_H__ */
diff --git a/drivers/net/ethernet/brocade/bna/bna_enet.c b/drivers/net/ethernet/brocade/bna/bna_enet.c
new file mode 100644
index 000000000000..68a275d66fcf
--- /dev/null
+++ b/drivers/net/ethernet/brocade/bna/bna_enet.c
@@ -0,0 +1,2129 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+#include "bna.h"
+
+static inline int
+ethport_can_be_up(struct bna_ethport *ethport)
+{
+	int ready = 0;
+	if (ethport->bna->enet.type == BNA_ENET_T_REGULAR)
+		ready = ((ethport->flags & BNA_ETHPORT_F_ADMIN_UP) &&
+			 (ethport->flags & BNA_ETHPORT_F_RX_STARTED) &&
+			 (ethport->flags & BNA_ETHPORT_F_PORT_ENABLED));
+	else
+		ready = ((ethport->flags & BNA_ETHPORT_F_ADMIN_UP) &&
+			 (ethport->flags & BNA_ETHPORT_F_RX_STARTED) &&
+			 !(ethport->flags & BNA_ETHPORT_F_PORT_ENABLED));
+	return ready;
+}
+
+#define ethport_is_up ethport_can_be_up
+
+enum bna_ethport_event {
+	ETHPORT_E_START			= 1,
+	ETHPORT_E_STOP			= 2,
+	ETHPORT_E_FAIL			= 3,
+	ETHPORT_E_UP			= 4,
+	ETHPORT_E_DOWN			= 5,
+	ETHPORT_E_FWRESP_UP_OK		= 6,
+	ETHPORT_E_FWRESP_DOWN		= 7,
+	ETHPORT_E_FWRESP_UP_FAIL	= 8,
+};
+
+enum bna_enet_event {
+	ENET_E_START			= 1,
+	ENET_E_STOP			= 2,
+	ENET_E_FAIL			= 3,
+	ENET_E_PAUSE_CFG		= 4,
+	ENET_E_MTU_CFG			= 5,
+	ENET_E_FWRESP_PAUSE		= 6,
+	ENET_E_CHLD_STOPPED		= 7,
+};
+
+enum bna_ioceth_event {
+	IOCETH_E_ENABLE			= 1,
+	IOCETH_E_DISABLE		= 2,
+	IOCETH_E_IOC_RESET		= 3,
+	IOCETH_E_IOC_FAILED		= 4,
+	IOCETH_E_IOC_READY		= 5,
+	IOCETH_E_ENET_ATTR_RESP		= 6,
+	IOCETH_E_ENET_STOPPED		= 7,
+	IOCETH_E_IOC_DISABLED		= 8,
+};
+
+#define bna_stats_copy(_name, _type)					\
+do {									\
+	count = sizeof(struct bfi_enet_stats_ ## _type) / sizeof(u64);	\
+	stats_src = (u64 *)&bna->stats.hw_stats_kva->_name ## _stats;	\
+	stats_dst = (u64 *)&bna->stats.hw_stats._name ## _stats;	\
+	for (i = 0; i < count; i++)					\
+		stats_dst[i] = be64_to_cpu(stats_src[i]);		\
+} while (0)								\
+
+/*
+ * FW response handlers
+ */
+
+static void
+bna_bfi_ethport_enable_aen(struct bna_ethport *ethport,
+				struct bfi_msgq_mhdr *msghdr)
+{
+	ethport->flags |= BNA_ETHPORT_F_PORT_ENABLED;
+
+	if (ethport_can_be_up(ethport))
+		bfa_fsm_send_event(ethport, ETHPORT_E_UP);
+}
+
+static void
+bna_bfi_ethport_disable_aen(struct bna_ethport *ethport,
+				struct bfi_msgq_mhdr *msghdr)
+{
+	int ethport_up = ethport_is_up(ethport);
+
+	ethport->flags &= ~BNA_ETHPORT_F_PORT_ENABLED;
+
+	if (ethport_up)
+		bfa_fsm_send_event(ethport, ETHPORT_E_DOWN);
+}
+
+static void
+bna_bfi_ethport_admin_rsp(struct bna_ethport *ethport,
+				struct bfi_msgq_mhdr *msghdr)
+{
+	struct bfi_enet_enable_req *admin_req =
+		&ethport->bfi_enet_cmd.admin_req;
+	struct bfi_enet_rsp *rsp = (struct bfi_enet_rsp *)msghdr;
+
+	switch (admin_req->enable) {
+	case BNA_STATUS_T_ENABLED:
+		if (rsp->error == BFI_ENET_CMD_OK)
+			bfa_fsm_send_event(ethport, ETHPORT_E_FWRESP_UP_OK);
+		else {
+			ethport->flags &= ~BNA_ETHPORT_F_PORT_ENABLED;
+			bfa_fsm_send_event(ethport, ETHPORT_E_FWRESP_UP_FAIL);
+		}
+		break;
+
+	case BNA_STATUS_T_DISABLED:
+		bfa_fsm_send_event(ethport, ETHPORT_E_FWRESP_DOWN);
+		ethport->link_status = BNA_LINK_DOWN;
+		ethport->link_cbfn(ethport->bna->bnad, BNA_LINK_DOWN);
+		break;
+	}
+}
+
+static void
+bna_bfi_ethport_lpbk_rsp(struct bna_ethport *ethport,
+				struct bfi_msgq_mhdr *msghdr)
+{
+	struct bfi_enet_diag_lb_req *diag_lb_req =
+		&ethport->bfi_enet_cmd.lpbk_req;
+	struct bfi_enet_rsp *rsp = (struct bfi_enet_rsp *)msghdr;
+
+	switch (diag_lb_req->enable) {
+	case BNA_STATUS_T_ENABLED:
+		if (rsp->error == BFI_ENET_CMD_OK)
+			bfa_fsm_send_event(ethport, ETHPORT_E_FWRESP_UP_OK);
+		else {
+			ethport->flags &= ~BNA_ETHPORT_F_ADMIN_UP;
+			bfa_fsm_send_event(ethport, ETHPORT_E_FWRESP_UP_FAIL);
+		}
+		break;
+
+	case BNA_STATUS_T_DISABLED:
+		bfa_fsm_send_event(ethport, ETHPORT_E_FWRESP_DOWN);
+		break;
+	}
+}
+
+static void
+bna_bfi_pause_set_rsp(struct bna_enet *enet, struct bfi_msgq_mhdr *msghdr)
+{
+	bfa_fsm_send_event(enet, ENET_E_FWRESP_PAUSE);
+}
+
+static void
+bna_bfi_attr_get_rsp(struct bna_ioceth *ioceth,
+			struct bfi_msgq_mhdr *msghdr)
+{
+	struct bfi_enet_attr_rsp *rsp = (struct bfi_enet_attr_rsp *)msghdr;
+
+	/**
+	 * Store only if not set earlier, since BNAD can override the HW
+	 * attributes
+	 */
+	if (!ioceth->attr.num_txq)
+		ioceth->attr.num_txq = ntohl(rsp->max_cfg);
+	if (!ioceth->attr.num_rxp)
+		ioceth->attr.num_rxp = ntohl(rsp->max_cfg);
+	ioceth->attr.num_ucmac = ntohl(rsp->max_ucmac);
+	ioceth->attr.num_mcmac = BFI_ENET_MAX_MCAM;
+	ioceth->attr.max_rit_size = ntohl(rsp->rit_size);
+
+	bfa_fsm_send_event(ioceth, IOCETH_E_ENET_ATTR_RESP);
+}
+
+static void
+bna_bfi_stats_get_rsp(struct bna *bna, struct bfi_msgq_mhdr *msghdr)
+{
+	struct bfi_enet_stats_req *stats_req = &bna->stats_mod.stats_get;
+	u64 *stats_src;
+	u64 *stats_dst;
+	u32 tx_enet_mask = ntohl(stats_req->tx_enet_mask);
+	u32 rx_enet_mask = ntohl(stats_req->rx_enet_mask);
+	int count;
+	int i;
+
+	bna_stats_copy(mac, mac);
+	bna_stats_copy(bpc, bpc);
+	bna_stats_copy(rad, rad);
+	bna_stats_copy(rlb, rad);
+	bna_stats_copy(fc_rx, fc_rx);
+	bna_stats_copy(fc_tx, fc_tx);
+
+	stats_src = (u64 *)&(bna->stats.hw_stats_kva->rxf_stats[0]);
+
+	/* Copy Rxf stats to SW area, scatter them while copying */
+	for (i = 0; i < BFI_ENET_CFG_MAX; i++) {
+		stats_dst = (u64 *)&(bna->stats.hw_stats.rxf_stats[i]);
+		memset(stats_dst, 0, sizeof(struct bfi_enet_stats_rxf));
+		if (rx_enet_mask & ((u32)(1 << i))) {
+			int k;
+			count = sizeof(struct bfi_enet_stats_rxf) /
+				sizeof(u64);
+			for (k = 0; k < count; k++) {
+				stats_dst[k] = be64_to_cpu(*stats_src);
+				stats_src++;
+			}
+		}
+	}
+
+	/* Copy Txf stats to SW area, scatter them while copying */
+	for (i = 0; i < BFI_ENET_CFG_MAX; i++) {
+		stats_dst = (u64 *)&(bna->stats.hw_stats.txf_stats[i]);
+		memset(stats_dst, 0, sizeof(struct bfi_enet_stats_txf));
+		if (tx_enet_mask & ((u32)(1 << i))) {
+			int k;
+			count = sizeof(struct bfi_enet_stats_txf) /
+				sizeof(u64);
+			for (k = 0; k < count; k++) {
+				stats_dst[k] = be64_to_cpu(*stats_src);
+				stats_src++;
+			}
+		}
+	}
+
+	bna->stats_mod.stats_get_busy = false;
+	bnad_cb_stats_get(bna->bnad, BNA_CB_SUCCESS, &bna->stats);
+}
+
+static void
+bna_bfi_ethport_linkup_aen(struct bna_ethport *ethport,
+			struct bfi_msgq_mhdr *msghdr)
+{
+	ethport->link_status = BNA_LINK_UP;
+
+	/* Dispatch events */
+	ethport->link_cbfn(ethport->bna->bnad, ethport->link_status);
+}
+
+static void
+bna_bfi_ethport_linkdown_aen(struct bna_ethport *ethport,
+				struct bfi_msgq_mhdr *msghdr)
+{
+	ethport->link_status = BNA_LINK_DOWN;
+
+	/* Dispatch events */
+	ethport->link_cbfn(ethport->bna->bnad, BNA_LINK_DOWN);
+}
+
+static void
+bna_err_handler(struct bna *bna, u32 intr_status)
+{
+	if (BNA_IS_HALT_INTR(bna, intr_status))
+		bna_halt_clear(bna);
+
+	bfa_nw_ioc_error_isr(&bna->ioceth.ioc);
+}
+
+void
+bna_mbox_handler(struct bna *bna, u32 intr_status)
+{
+	if (BNA_IS_ERR_INTR(bna, intr_status)) {
+		bna_err_handler(bna, intr_status);
+		return;
+	}
+	if (BNA_IS_MBOX_INTR(bna, intr_status))
+		bfa_nw_ioc_mbox_isr(&bna->ioceth.ioc);
+}
+
+static void
+bna_msgq_rsp_handler(void *arg, struct bfi_msgq_mhdr *msghdr)
+{
+	struct bna *bna = (struct bna *)arg;
+	struct bna_tx *tx;
+	struct bna_rx *rx;
+
+	switch (msghdr->msg_id) {
+	case BFI_ENET_I2H_RX_CFG_SET_RSP:
+		bna_rx_from_rid(bna, msghdr->enet_id, rx);
+		if (rx)
+			bna_bfi_rx_enet_start_rsp(rx, msghdr);
+		break;
+
+	case BFI_ENET_I2H_RX_CFG_CLR_RSP:
+		bna_rx_from_rid(bna, msghdr->enet_id, rx);
+		if (rx)
+			bna_bfi_rx_enet_stop_rsp(rx, msghdr);
+		break;
+
+	case BFI_ENET_I2H_RIT_CFG_RSP:
+	case BFI_ENET_I2H_RSS_CFG_RSP:
+	case BFI_ENET_I2H_RSS_ENABLE_RSP:
+	case BFI_ENET_I2H_RX_PROMISCUOUS_RSP:
+	case BFI_ENET_I2H_RX_DEFAULT_RSP:
+	case BFI_ENET_I2H_MAC_UCAST_SET_RSP:
+	case BFI_ENET_I2H_MAC_UCAST_CLR_RSP:
+	case BFI_ENET_I2H_MAC_UCAST_ADD_RSP:
+	case BFI_ENET_I2H_MAC_UCAST_DEL_RSP:
+	case BFI_ENET_I2H_MAC_MCAST_DEL_RSP:
+	case BFI_ENET_I2H_MAC_MCAST_FILTER_RSP:
+	case BFI_ENET_I2H_RX_VLAN_SET_RSP:
+	case BFI_ENET_I2H_RX_VLAN_STRIP_ENABLE_RSP:
+		bna_rx_from_rid(bna, msghdr->enet_id, rx);
+		if (rx)
+			bna_bfi_rxf_cfg_rsp(&rx->rxf, msghdr);
+		break;
+
+	case BFI_ENET_I2H_MAC_MCAST_ADD_RSP:
+		bna_rx_from_rid(bna, msghdr->enet_id, rx);
+		if (rx)
+			bna_bfi_rxf_mcast_add_rsp(&rx->rxf, msghdr);
+		break;
+
+	case BFI_ENET_I2H_TX_CFG_SET_RSP:
+		bna_tx_from_rid(bna, msghdr->enet_id, tx);
+		if (tx)
+			bna_bfi_tx_enet_start_rsp(tx, msghdr);
+		break;
+
+	case BFI_ENET_I2H_TX_CFG_CLR_RSP:
+		bna_tx_from_rid(bna, msghdr->enet_id, tx);
+		if (tx)
+			bna_bfi_tx_enet_stop_rsp(tx, msghdr);
+		break;
+
+	case BFI_ENET_I2H_PORT_ADMIN_RSP:
+		bna_bfi_ethport_admin_rsp(&bna->ethport, msghdr);
+		break;
+
+	case BFI_ENET_I2H_DIAG_LOOPBACK_RSP:
+		bna_bfi_ethport_lpbk_rsp(&bna->ethport, msghdr);
+		break;
+
+	case BFI_ENET_I2H_SET_PAUSE_RSP:
+		bna_bfi_pause_set_rsp(&bna->enet, msghdr);
+		break;
+
+	case BFI_ENET_I2H_GET_ATTR_RSP:
+		bna_bfi_attr_get_rsp(&bna->ioceth, msghdr);
+		break;
+
+	case BFI_ENET_I2H_STATS_GET_RSP:
+		bna_bfi_stats_get_rsp(bna, msghdr);
+		break;
+
+	case BFI_ENET_I2H_STATS_CLR_RSP:
+		/* No-op */
+		break;
+
+	case BFI_ENET_I2H_LINK_UP_AEN:
+		bna_bfi_ethport_linkup_aen(&bna->ethport, msghdr);
+		break;
+
+	case BFI_ENET_I2H_LINK_DOWN_AEN:
+		bna_bfi_ethport_linkdown_aen(&bna->ethport, msghdr);
+		break;
+
+	case BFI_ENET_I2H_PORT_ENABLE_AEN:
+		bna_bfi_ethport_enable_aen(&bna->ethport, msghdr);
+		break;
+
+	case BFI_ENET_I2H_PORT_DISABLE_AEN:
+		bna_bfi_ethport_disable_aen(&bna->ethport, msghdr);
+		break;
+
+	case BFI_ENET_I2H_BW_UPDATE_AEN:
+		bna_bfi_bw_update_aen(&bna->tx_mod);
+		break;
+
+	default:
+		break;
+	}
+}
+
+/**
+ * ETHPORT
+ */
+#define call_ethport_stop_cbfn(_ethport)				\
+do {									\
+	if ((_ethport)->stop_cbfn) {					\
+		void (*cbfn)(struct bna_enet *);			\
+		cbfn = (_ethport)->stop_cbfn;				\
+		(_ethport)->stop_cbfn = NULL;				\
+		cbfn(&(_ethport)->bna->enet);				\
+	}								\
+} while (0)
+
+#define call_ethport_adminup_cbfn(ethport, status)			\
+do {									\
+	if ((ethport)->adminup_cbfn) {					\
+		void (*cbfn)(struct bnad *, enum bna_cb_status);	\
+		cbfn = (ethport)->adminup_cbfn;				\
+		(ethport)->adminup_cbfn = NULL;				\
+		cbfn((ethport)->bna->bnad, status);			\
+	}								\
+} while (0)
+
+static void
+bna_bfi_ethport_admin_up(struct bna_ethport *ethport)
+{
+	struct bfi_enet_enable_req *admin_up_req =
+		&ethport->bfi_enet_cmd.admin_req;
+
+	bfi_msgq_mhdr_set(admin_up_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_PORT_ADMIN_UP_REQ, 0, 0);
+	admin_up_req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_enable_req)));
+	admin_up_req->enable = BNA_STATUS_T_ENABLED;
+
+	bfa_msgq_cmd_set(&ethport->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_enable_req), &admin_up_req->mh);
+	bfa_msgq_cmd_post(&ethport->bna->msgq, &ethport->msgq_cmd);
+}
+
+static void
+bna_bfi_ethport_admin_down(struct bna_ethport *ethport)
+{
+	struct bfi_enet_enable_req *admin_down_req =
+		&ethport->bfi_enet_cmd.admin_req;
+
+	bfi_msgq_mhdr_set(admin_down_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_PORT_ADMIN_UP_REQ, 0, 0);
+	admin_down_req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_enable_req)));
+	admin_down_req->enable = BNA_STATUS_T_DISABLED;
+
+	bfa_msgq_cmd_set(&ethport->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_enable_req), &admin_down_req->mh);
+	bfa_msgq_cmd_post(&ethport->bna->msgq, &ethport->msgq_cmd);
+}
+
+static void
+bna_bfi_ethport_lpbk_up(struct bna_ethport *ethport)
+{
+	struct bfi_enet_diag_lb_req *lpbk_up_req =
+		&ethport->bfi_enet_cmd.lpbk_req;
+
+	bfi_msgq_mhdr_set(lpbk_up_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_DIAG_LOOPBACK_REQ, 0, 0);
+	lpbk_up_req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_diag_lb_req)));
+	lpbk_up_req->mode = (ethport->bna->enet.type ==
+				BNA_ENET_T_LOOPBACK_INTERNAL) ?
+				BFI_ENET_DIAG_LB_OPMODE_EXT :
+				BFI_ENET_DIAG_LB_OPMODE_CBL;
+	lpbk_up_req->enable = BNA_STATUS_T_ENABLED;
+
+	bfa_msgq_cmd_set(&ethport->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_diag_lb_req), &lpbk_up_req->mh);
+	bfa_msgq_cmd_post(&ethport->bna->msgq, &ethport->msgq_cmd);
+}
+
+static void
+bna_bfi_ethport_lpbk_down(struct bna_ethport *ethport)
+{
+	struct bfi_enet_diag_lb_req *lpbk_down_req =
+		&ethport->bfi_enet_cmd.lpbk_req;
+
+	bfi_msgq_mhdr_set(lpbk_down_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_DIAG_LOOPBACK_REQ, 0, 0);
+	lpbk_down_req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_diag_lb_req)));
+	lpbk_down_req->enable = BNA_STATUS_T_DISABLED;
+
+	bfa_msgq_cmd_set(&ethport->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_diag_lb_req), &lpbk_down_req->mh);
+	bfa_msgq_cmd_post(&ethport->bna->msgq, &ethport->msgq_cmd);
+}
+
+static void
+bna_bfi_ethport_up(struct bna_ethport *ethport)
+{
+	if (ethport->bna->enet.type == BNA_ENET_T_REGULAR)
+		bna_bfi_ethport_admin_up(ethport);
+	else
+		bna_bfi_ethport_lpbk_up(ethport);
+}
+
+static void
+bna_bfi_ethport_down(struct bna_ethport *ethport)
+{
+	if (ethport->bna->enet.type == BNA_ENET_T_REGULAR)
+		bna_bfi_ethport_admin_down(ethport);
+	else
+		bna_bfi_ethport_lpbk_down(ethport);
+}
+
+bfa_fsm_state_decl(bna_ethport, stopped, struct bna_ethport,
+			enum bna_ethport_event);
+bfa_fsm_state_decl(bna_ethport, down, struct bna_ethport,
+			enum bna_ethport_event);
+bfa_fsm_state_decl(bna_ethport, up_resp_wait, struct bna_ethport,
+			enum bna_ethport_event);
+bfa_fsm_state_decl(bna_ethport, down_resp_wait, struct bna_ethport,
+			enum bna_ethport_event);
+bfa_fsm_state_decl(bna_ethport, up, struct bna_ethport,
+			enum bna_ethport_event);
+bfa_fsm_state_decl(bna_ethport, last_resp_wait, struct bna_ethport,
+			enum bna_ethport_event);
+
+static void
+bna_ethport_sm_stopped_entry(struct bna_ethport *ethport)
+{
+	call_ethport_stop_cbfn(ethport);
+}
+
+static void
+bna_ethport_sm_stopped(struct bna_ethport *ethport,
+			enum bna_ethport_event event)
+{
+	switch (event) {
+	case ETHPORT_E_START:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_down);
+		break;
+
+	case ETHPORT_E_STOP:
+		call_ethport_stop_cbfn(ethport);
+		break;
+
+	case ETHPORT_E_FAIL:
+		/* No-op */
+		break;
+
+	case ETHPORT_E_DOWN:
+		/* This event is received due to Rx objects failing */
+		/* No-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ethport_sm_down_entry(struct bna_ethport *ethport)
+{
+}
+
+static void
+bna_ethport_sm_down(struct bna_ethport *ethport,
+			enum bna_ethport_event event)
+{
+	switch (event) {
+	case ETHPORT_E_STOP:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_stopped);
+		break;
+
+	case ETHPORT_E_FAIL:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_stopped);
+		break;
+
+	case ETHPORT_E_UP:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_up_resp_wait);
+		bna_bfi_ethport_up(ethport);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ethport_sm_up_resp_wait_entry(struct bna_ethport *ethport)
+{
+}
+
+static void
+bna_ethport_sm_up_resp_wait(struct bna_ethport *ethport,
+			enum bna_ethport_event event)
+{
+	switch (event) {
+	case ETHPORT_E_STOP:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_last_resp_wait);
+		break;
+
+	case ETHPORT_E_FAIL:
+		call_ethport_adminup_cbfn(ethport, BNA_CB_FAIL);
+		bfa_fsm_set_state(ethport, bna_ethport_sm_stopped);
+		break;
+
+	case ETHPORT_E_DOWN:
+		call_ethport_adminup_cbfn(ethport, BNA_CB_INTERRUPT);
+		bfa_fsm_set_state(ethport, bna_ethport_sm_down_resp_wait);
+		break;
+
+	case ETHPORT_E_FWRESP_UP_OK:
+		call_ethport_adminup_cbfn(ethport, BNA_CB_SUCCESS);
+		bfa_fsm_set_state(ethport, bna_ethport_sm_up);
+		break;
+
+	case ETHPORT_E_FWRESP_UP_FAIL:
+		call_ethport_adminup_cbfn(ethport, BNA_CB_FAIL);
+		bfa_fsm_set_state(ethport, bna_ethport_sm_down);
+		break;
+
+	case ETHPORT_E_FWRESP_DOWN:
+		/* down_resp_wait -> up_resp_wait transition on ETHPORT_E_UP */
+		bna_bfi_ethport_up(ethport);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ethport_sm_down_resp_wait_entry(struct bna_ethport *ethport)
+{
+	/**
+	 * NOTE: Do not call bna_bfi_ethport_down() here. That will over step
+	 * mbox due to up_resp_wait -> down_resp_wait transition on event
+	 * ETHPORT_E_DOWN
+	 */
+}
+
+static void
+bna_ethport_sm_down_resp_wait(struct bna_ethport *ethport,
+			enum bna_ethport_event event)
+{
+	switch (event) {
+	case ETHPORT_E_STOP:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_last_resp_wait);
+		break;
+
+	case ETHPORT_E_FAIL:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_stopped);
+		break;
+
+	case ETHPORT_E_UP:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_up_resp_wait);
+		break;
+
+	case ETHPORT_E_FWRESP_UP_OK:
+		/* up_resp_wait->down_resp_wait transition on ETHPORT_E_DOWN */
+		bna_bfi_ethport_down(ethport);
+		break;
+
+	case ETHPORT_E_FWRESP_UP_FAIL:
+	case ETHPORT_E_FWRESP_DOWN:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_down);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ethport_sm_up_entry(struct bna_ethport *ethport)
+{
+}
+
+static void
+bna_ethport_sm_up(struct bna_ethport *ethport,
+			enum bna_ethport_event event)
+{
+	switch (event) {
+	case ETHPORT_E_STOP:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_last_resp_wait);
+		bna_bfi_ethport_down(ethport);
+		break;
+
+	case ETHPORT_E_FAIL:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_stopped);
+		break;
+
+	case ETHPORT_E_DOWN:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_down_resp_wait);
+		bna_bfi_ethport_down(ethport);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ethport_sm_last_resp_wait_entry(struct bna_ethport *ethport)
+{
+}
+
+static void
+bna_ethport_sm_last_resp_wait(struct bna_ethport *ethport,
+			enum bna_ethport_event event)
+{
+	switch (event) {
+	case ETHPORT_E_FAIL:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_stopped);
+		break;
+
+	case ETHPORT_E_DOWN:
+		/**
+		 * This event is received due to Rx objects stopping in
+		 * parallel to ethport
+		 */
+		/* No-op */
+		break;
+
+	case ETHPORT_E_FWRESP_UP_OK:
+		/* up_resp_wait->last_resp_wait transition on ETHPORT_T_STOP */
+		bna_bfi_ethport_down(ethport);
+		break;
+
+	case ETHPORT_E_FWRESP_UP_FAIL:
+	case ETHPORT_E_FWRESP_DOWN:
+		bfa_fsm_set_state(ethport, bna_ethport_sm_stopped);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ethport_init(struct bna_ethport *ethport, struct bna *bna)
+{
+	ethport->flags |= (BNA_ETHPORT_F_ADMIN_UP | BNA_ETHPORT_F_PORT_ENABLED);
+	ethport->bna = bna;
+
+	ethport->link_status = BNA_LINK_DOWN;
+	ethport->link_cbfn = bnad_cb_ethport_link_status;
+
+	ethport->rx_started_count = 0;
+
+	ethport->stop_cbfn = NULL;
+	ethport->adminup_cbfn = NULL;
+
+	bfa_fsm_set_state(ethport, bna_ethport_sm_stopped);
+}
+
+static void
+bna_ethport_uninit(struct bna_ethport *ethport)
+{
+	ethport->flags &= ~BNA_ETHPORT_F_ADMIN_UP;
+	ethport->flags &= ~BNA_ETHPORT_F_PORT_ENABLED;
+
+	ethport->bna = NULL;
+}
+
+static void
+bna_ethport_start(struct bna_ethport *ethport)
+{
+	bfa_fsm_send_event(ethport, ETHPORT_E_START);
+}
+
+static void
+bna_enet_cb_ethport_stopped(struct bna_enet *enet)
+{
+	bfa_wc_down(&enet->chld_stop_wc);
+}
+
+static void
+bna_ethport_stop(struct bna_ethport *ethport)
+{
+	ethport->stop_cbfn = bna_enet_cb_ethport_stopped;
+	bfa_fsm_send_event(ethport, ETHPORT_E_STOP);
+}
+
+static void
+bna_ethport_fail(struct bna_ethport *ethport)
+{
+	/* Reset the physical port status to enabled */
+	ethport->flags |= BNA_ETHPORT_F_PORT_ENABLED;
+
+	if (ethport->link_status != BNA_LINK_DOWN) {
+		ethport->link_status = BNA_LINK_DOWN;
+		ethport->link_cbfn(ethport->bna->bnad, BNA_LINK_DOWN);
+	}
+	bfa_fsm_send_event(ethport, ETHPORT_E_FAIL);
+}
+
+/* Should be called only when ethport is disabled */
+void
+bna_ethport_cb_rx_started(struct bna_ethport *ethport)
+{
+	ethport->rx_started_count++;
+
+	if (ethport->rx_started_count == 1) {
+		ethport->flags |= BNA_ETHPORT_F_RX_STARTED;
+
+		if (ethport_can_be_up(ethport))
+			bfa_fsm_send_event(ethport, ETHPORT_E_UP);
+	}
+}
+
+void
+bna_ethport_cb_rx_stopped(struct bna_ethport *ethport)
+{
+	int ethport_up = ethport_is_up(ethport);
+
+	ethport->rx_started_count--;
+
+	if (ethport->rx_started_count == 0) {
+		ethport->flags &= ~BNA_ETHPORT_F_RX_STARTED;
+
+		if (ethport_up)
+			bfa_fsm_send_event(ethport, ETHPORT_E_DOWN);
+	}
+}
+
+/**
+ * ENET
+ */
+#define bna_enet_chld_start(enet)					\
+do {									\
+	enum bna_tx_type tx_type =					\
+		((enet)->type == BNA_ENET_T_REGULAR) ?			\
+		BNA_TX_T_REGULAR : BNA_TX_T_LOOPBACK;			\
+	enum bna_rx_type rx_type =					\
+		((enet)->type == BNA_ENET_T_REGULAR) ?			\
+		BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;			\
+	bna_ethport_start(&(enet)->bna->ethport);			\
+	bna_tx_mod_start(&(enet)->bna->tx_mod, tx_type);		\
+	bna_rx_mod_start(&(enet)->bna->rx_mod, rx_type);		\
+} while (0)
+
+#define bna_enet_chld_stop(enet)					\
+do {									\
+	enum bna_tx_type tx_type =					\
+		((enet)->type == BNA_ENET_T_REGULAR) ?			\
+		BNA_TX_T_REGULAR : BNA_TX_T_LOOPBACK;			\
+	enum bna_rx_type rx_type =					\
+		((enet)->type == BNA_ENET_T_REGULAR) ?			\
+		BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;			\
+	bfa_wc_init(&(enet)->chld_stop_wc, bna_enet_cb_chld_stopped, (enet));\
+	bfa_wc_up(&(enet)->chld_stop_wc);				\
+	bna_ethport_stop(&(enet)->bna->ethport);			\
+	bfa_wc_up(&(enet)->chld_stop_wc);				\
+	bna_tx_mod_stop(&(enet)->bna->tx_mod, tx_type);			\
+	bfa_wc_up(&(enet)->chld_stop_wc);				\
+	bna_rx_mod_stop(&(enet)->bna->rx_mod, rx_type);			\
+	bfa_wc_wait(&(enet)->chld_stop_wc);				\
+} while (0)
+
+#define bna_enet_chld_fail(enet)					\
+do {									\
+	bna_ethport_fail(&(enet)->bna->ethport);			\
+	bna_tx_mod_fail(&(enet)->bna->tx_mod);				\
+	bna_rx_mod_fail(&(enet)->bna->rx_mod);				\
+} while (0)
+
+#define bna_enet_rx_start(enet)						\
+do {									\
+	enum bna_rx_type rx_type =					\
+		((enet)->type == BNA_ENET_T_REGULAR) ?			\
+		BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;			\
+	bna_rx_mod_start(&(enet)->bna->rx_mod, rx_type);		\
+} while (0)
+
+#define bna_enet_rx_stop(enet)						\
+do {									\
+	enum bna_rx_type rx_type =					\
+		((enet)->type == BNA_ENET_T_REGULAR) ?			\
+		BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;			\
+	bfa_wc_init(&(enet)->chld_stop_wc, bna_enet_cb_chld_stopped, (enet));\
+	bfa_wc_up(&(enet)->chld_stop_wc);				\
+	bna_rx_mod_stop(&(enet)->bna->rx_mod, rx_type);			\
+	bfa_wc_wait(&(enet)->chld_stop_wc);				\
+} while (0)
+
+#define call_enet_stop_cbfn(enet)					\
+do {									\
+	if ((enet)->stop_cbfn) {					\
+		void (*cbfn)(void *);					\
+		void *cbarg;						\
+		cbfn = (enet)->stop_cbfn;				\
+		cbarg = (enet)->stop_cbarg;				\
+		(enet)->stop_cbfn = NULL;				\
+		(enet)->stop_cbarg = NULL;				\
+		cbfn(cbarg);						\
+	}								\
+} while (0)
+
+#define call_enet_pause_cbfn(enet)					\
+do {									\
+	if ((enet)->pause_cbfn) {					\
+		void (*cbfn)(struct bnad *);				\
+		cbfn = (enet)->pause_cbfn;				\
+		(enet)->pause_cbfn = NULL;				\
+		cbfn((enet)->bna->bnad);				\
+	}								\
+} while (0)
+
+#define call_enet_mtu_cbfn(enet)					\
+do {									\
+	if ((enet)->mtu_cbfn) {						\
+		void (*cbfn)(struct bnad *);				\
+		cbfn = (enet)->mtu_cbfn;				\
+		(enet)->mtu_cbfn = NULL;				\
+		cbfn((enet)->bna->bnad);				\
+	}								\
+} while (0)
+
+static void bna_enet_cb_chld_stopped(void *arg);
+static void bna_bfi_pause_set(struct bna_enet *enet);
+
+bfa_fsm_state_decl(bna_enet, stopped, struct bna_enet,
+			enum bna_enet_event);
+bfa_fsm_state_decl(bna_enet, pause_init_wait, struct bna_enet,
+			enum bna_enet_event);
+bfa_fsm_state_decl(bna_enet, last_resp_wait, struct bna_enet,
+			enum bna_enet_event);
+bfa_fsm_state_decl(bna_enet, started, struct bna_enet,
+			enum bna_enet_event);
+bfa_fsm_state_decl(bna_enet, cfg_wait, struct bna_enet,
+			enum bna_enet_event);
+bfa_fsm_state_decl(bna_enet, cfg_stop_wait, struct bna_enet,
+			enum bna_enet_event);
+bfa_fsm_state_decl(bna_enet, chld_stop_wait, struct bna_enet,
+			enum bna_enet_event);
+
+static void
+bna_enet_sm_stopped_entry(struct bna_enet *enet)
+{
+	call_enet_pause_cbfn(enet);
+	call_enet_mtu_cbfn(enet);
+	call_enet_stop_cbfn(enet);
+}
+
+static void
+bna_enet_sm_stopped(struct bna_enet *enet, enum bna_enet_event event)
+{
+	switch (event) {
+	case ENET_E_START:
+		bfa_fsm_set_state(enet, bna_enet_sm_pause_init_wait);
+		break;
+
+	case ENET_E_STOP:
+		call_enet_stop_cbfn(enet);
+		break;
+
+	case ENET_E_FAIL:
+		/* No-op */
+		break;
+
+	case ENET_E_PAUSE_CFG:
+		call_enet_pause_cbfn(enet);
+		break;
+
+	case ENET_E_MTU_CFG:
+		call_enet_mtu_cbfn(enet);
+		break;
+
+	case ENET_E_CHLD_STOPPED:
+		/**
+		 * This event is received due to Ethport, Tx and Rx objects
+		 * failing
+		 */
+		/* No-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_enet_sm_pause_init_wait_entry(struct bna_enet *enet)
+{
+	bna_bfi_pause_set(enet);
+}
+
+static void
+bna_enet_sm_pause_init_wait(struct bna_enet *enet,
+				enum bna_enet_event event)
+{
+	switch (event) {
+	case ENET_E_STOP:
+		enet->flags &= ~BNA_ENET_F_PAUSE_CHANGED;
+		bfa_fsm_set_state(enet, bna_enet_sm_last_resp_wait);
+		break;
+
+	case ENET_E_FAIL:
+		enet->flags &= ~BNA_ENET_F_PAUSE_CHANGED;
+		bfa_fsm_set_state(enet, bna_enet_sm_stopped);
+		break;
+
+	case ENET_E_PAUSE_CFG:
+		enet->flags |= BNA_ENET_F_PAUSE_CHANGED;
+		break;
+
+	case ENET_E_MTU_CFG:
+		/* No-op */
+		break;
+
+	case ENET_E_FWRESP_PAUSE:
+		if (enet->flags & BNA_ENET_F_PAUSE_CHANGED) {
+			enet->flags &= ~BNA_ENET_F_PAUSE_CHANGED;
+			bna_bfi_pause_set(enet);
+		} else {
+			bfa_fsm_set_state(enet, bna_enet_sm_started);
+			bna_enet_chld_start(enet);
+		}
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_enet_sm_last_resp_wait_entry(struct bna_enet *enet)
+{
+	enet->flags &= ~BNA_ENET_F_PAUSE_CHANGED;
+}
+
+static void
+bna_enet_sm_last_resp_wait(struct bna_enet *enet,
+				enum bna_enet_event event)
+{
+	switch (event) {
+	case ENET_E_FAIL:
+	case ENET_E_FWRESP_PAUSE:
+		bfa_fsm_set_state(enet, bna_enet_sm_stopped);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_enet_sm_started_entry(struct bna_enet *enet)
+{
+	/**
+	 * NOTE: Do not call bna_enet_chld_start() here, since it will be
+	 * inadvertently called during cfg_wait->started transition as well
+	 */
+	call_enet_pause_cbfn(enet);
+	call_enet_mtu_cbfn(enet);
+}
+
+static void
+bna_enet_sm_started(struct bna_enet *enet,
+			enum bna_enet_event event)
+{
+	switch (event) {
+	case ENET_E_STOP:
+		bfa_fsm_set_state(enet, bna_enet_sm_chld_stop_wait);
+		break;
+
+	case ENET_E_FAIL:
+		bfa_fsm_set_state(enet, bna_enet_sm_stopped);
+		bna_enet_chld_fail(enet);
+		break;
+
+	case ENET_E_PAUSE_CFG:
+		bfa_fsm_set_state(enet, bna_enet_sm_cfg_wait);
+		bna_bfi_pause_set(enet);
+		break;
+
+	case ENET_E_MTU_CFG:
+		bfa_fsm_set_state(enet, bna_enet_sm_cfg_wait);
+		bna_enet_rx_stop(enet);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_enet_sm_cfg_wait_entry(struct bna_enet *enet)
+{
+}
+
+static void
+bna_enet_sm_cfg_wait(struct bna_enet *enet,
+			enum bna_enet_event event)
+{
+	switch (event) {
+	case ENET_E_STOP:
+		enet->flags &= ~BNA_ENET_F_PAUSE_CHANGED;
+		enet->flags &= ~BNA_ENET_F_MTU_CHANGED;
+		bfa_fsm_set_state(enet, bna_enet_sm_cfg_stop_wait);
+		break;
+
+	case ENET_E_FAIL:
+		enet->flags &= ~BNA_ENET_F_PAUSE_CHANGED;
+		enet->flags &= ~BNA_ENET_F_MTU_CHANGED;
+		bfa_fsm_set_state(enet, bna_enet_sm_stopped);
+		bna_enet_chld_fail(enet);
+		break;
+
+	case ENET_E_PAUSE_CFG:
+		enet->flags |= BNA_ENET_F_PAUSE_CHANGED;
+		break;
+
+	case ENET_E_MTU_CFG:
+		enet->flags |= BNA_ENET_F_MTU_CHANGED;
+		break;
+
+	case ENET_E_CHLD_STOPPED:
+		bna_enet_rx_start(enet);
+		/* Fall through */
+	case ENET_E_FWRESP_PAUSE:
+		if (enet->flags & BNA_ENET_F_PAUSE_CHANGED) {
+			enet->flags &= ~BNA_ENET_F_PAUSE_CHANGED;
+			bna_bfi_pause_set(enet);
+		} else if (enet->flags & BNA_ENET_F_MTU_CHANGED) {
+			enet->flags &= ~BNA_ENET_F_MTU_CHANGED;
+			bna_enet_rx_stop(enet);
+		} else {
+			bfa_fsm_set_state(enet, bna_enet_sm_started);
+		}
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_enet_sm_cfg_stop_wait_entry(struct bna_enet *enet)
+{
+	enet->flags &= ~BNA_ENET_F_PAUSE_CHANGED;
+	enet->flags &= ~BNA_ENET_F_MTU_CHANGED;
+}
+
+static void
+bna_enet_sm_cfg_stop_wait(struct bna_enet *enet,
+				enum bna_enet_event event)
+{
+	switch (event) {
+	case ENET_E_FAIL:
+		bfa_fsm_set_state(enet, bna_enet_sm_stopped);
+		bna_enet_chld_fail(enet);
+		break;
+
+	case ENET_E_FWRESP_PAUSE:
+	case ENET_E_CHLD_STOPPED:
+		bfa_fsm_set_state(enet, bna_enet_sm_chld_stop_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_enet_sm_chld_stop_wait_entry(struct bna_enet *enet)
+{
+	bna_enet_chld_stop(enet);
+}
+
+static void
+bna_enet_sm_chld_stop_wait(struct bna_enet *enet,
+				enum bna_enet_event event)
+{
+	switch (event) {
+	case ENET_E_FAIL:
+		bfa_fsm_set_state(enet, bna_enet_sm_stopped);
+		bna_enet_chld_fail(enet);
+		break;
+
+	case ENET_E_CHLD_STOPPED:
+		bfa_fsm_set_state(enet, bna_enet_sm_stopped);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_bfi_pause_set(struct bna_enet *enet)
+{
+	struct bfi_enet_set_pause_req *pause_req = &enet->pause_req;
+
+	bfi_msgq_mhdr_set(pause_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_SET_PAUSE_REQ, 0, 0);
+	pause_req->mh.num_entries = htons(
+	bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_set_pause_req)));
+	pause_req->tx_pause = enet->pause_config.tx_pause;
+	pause_req->rx_pause = enet->pause_config.rx_pause;
+
+	bfa_msgq_cmd_set(&enet->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_set_pause_req), &pause_req->mh);
+	bfa_msgq_cmd_post(&enet->bna->msgq, &enet->msgq_cmd);
+}
+
+static void
+bna_enet_cb_chld_stopped(void *arg)
+{
+	struct bna_enet *enet = (struct bna_enet *)arg;
+
+	bfa_fsm_send_event(enet, ENET_E_CHLD_STOPPED);
+}
+
+static void
+bna_enet_init(struct bna_enet *enet, struct bna *bna)
+{
+	enet->bna = bna;
+	enet->flags = 0;
+	enet->mtu = 0;
+	enet->type = BNA_ENET_T_REGULAR;
+
+	enet->stop_cbfn = NULL;
+	enet->stop_cbarg = NULL;
+
+	enet->pause_cbfn = NULL;
+
+	enet->mtu_cbfn = NULL;
+
+	bfa_fsm_set_state(enet, bna_enet_sm_stopped);
+}
+
+static void
+bna_enet_uninit(struct bna_enet *enet)
+{
+	enet->flags = 0;
+
+	enet->bna = NULL;
+}
+
+static void
+bna_enet_start(struct bna_enet *enet)
+{
+	enet->flags |= BNA_ENET_F_IOCETH_READY;
+	if (enet->flags & BNA_ENET_F_ENABLED)
+		bfa_fsm_send_event(enet, ENET_E_START);
+}
+
+static void
+bna_ioceth_cb_enet_stopped(void *arg)
+{
+	struct bna_ioceth *ioceth = (struct bna_ioceth *)arg;
+
+	bfa_fsm_send_event(ioceth, IOCETH_E_ENET_STOPPED);
+}
+
+static void
+bna_enet_stop(struct bna_enet *enet)
+{
+	enet->stop_cbfn = bna_ioceth_cb_enet_stopped;
+	enet->stop_cbarg = &enet->bna->ioceth;
+
+	enet->flags &= ~BNA_ENET_F_IOCETH_READY;
+	bfa_fsm_send_event(enet, ENET_E_STOP);
+}
+
+static void
+bna_enet_fail(struct bna_enet *enet)
+{
+	enet->flags &= ~BNA_ENET_F_IOCETH_READY;
+	bfa_fsm_send_event(enet, ENET_E_FAIL);
+}
+
+void
+bna_enet_cb_tx_stopped(struct bna_enet *enet)
+{
+	bfa_wc_down(&enet->chld_stop_wc);
+}
+
+void
+bna_enet_cb_rx_stopped(struct bna_enet *enet)
+{
+	bfa_wc_down(&enet->chld_stop_wc);
+}
+
+int
+bna_enet_mtu_get(struct bna_enet *enet)
+{
+	return enet->mtu;
+}
+
+void
+bna_enet_enable(struct bna_enet *enet)
+{
+	if (enet->fsm != (bfa_sm_t)bna_enet_sm_stopped)
+		return;
+
+	enet->flags |= BNA_ENET_F_ENABLED;
+
+	if (enet->flags & BNA_ENET_F_IOCETH_READY)
+		bfa_fsm_send_event(enet, ENET_E_START);
+}
+
+void
+bna_enet_disable(struct bna_enet *enet, enum bna_cleanup_type type,
+		 void (*cbfn)(void *))
+{
+	if (type == BNA_SOFT_CLEANUP) {
+		(*cbfn)(enet->bna->bnad);
+		return;
+	}
+
+	enet->stop_cbfn = cbfn;
+	enet->stop_cbarg = enet->bna->bnad;
+
+	enet->flags &= ~BNA_ENET_F_ENABLED;
+
+	bfa_fsm_send_event(enet, ENET_E_STOP);
+}
+
+void
+bna_enet_pause_config(struct bna_enet *enet,
+		      struct bna_pause_config *pause_config,
+		      void (*cbfn)(struct bnad *))
+{
+	enet->pause_config = *pause_config;
+
+	enet->pause_cbfn = cbfn;
+
+	bfa_fsm_send_event(enet, ENET_E_PAUSE_CFG);
+}
+
+void
+bna_enet_mtu_set(struct bna_enet *enet, int mtu,
+		 void (*cbfn)(struct bnad *))
+{
+	enet->mtu = mtu;
+
+	enet->mtu_cbfn = cbfn;
+
+	bfa_fsm_send_event(enet, ENET_E_MTU_CFG);
+}
+
+void
+bna_enet_perm_mac_get(struct bna_enet *enet, mac_t *mac)
+{
+	*mac = bfa_nw_ioc_get_mac(&enet->bna->ioceth.ioc);
+}
+
+/**
+ * IOCETH
+ */
+#define enable_mbox_intr(_ioceth)					\
+do {									\
+	u32 intr_status;						\
+	bna_intr_status_get((_ioceth)->bna, intr_status);		\
+	bnad_cb_mbox_intr_enable((_ioceth)->bna->bnad);			\
+	bna_mbox_intr_enable((_ioceth)->bna);				\
+} while (0)
+
+#define disable_mbox_intr(_ioceth)					\
+do {									\
+	bna_mbox_intr_disable((_ioceth)->bna);				\
+	bnad_cb_mbox_intr_disable((_ioceth)->bna->bnad);		\
+} while (0)
+
+#define call_ioceth_stop_cbfn(_ioceth)					\
+do {									\
+	if ((_ioceth)->stop_cbfn) {					\
+		void (*cbfn)(struct bnad *);				\
+		struct bnad *cbarg;					\
+		cbfn = (_ioceth)->stop_cbfn;				\
+		cbarg = (_ioceth)->stop_cbarg;				\
+		(_ioceth)->stop_cbfn = NULL;				\
+		(_ioceth)->stop_cbarg = NULL;				\
+		cbfn(cbarg);						\
+	}								\
+} while (0)
+
+#define bna_stats_mod_uninit(_stats_mod)				\
+do {									\
+} while (0)
+
+#define bna_stats_mod_start(_stats_mod)					\
+do {									\
+	(_stats_mod)->ioc_ready = true;					\
+} while (0)
+
+#define bna_stats_mod_stop(_stats_mod)					\
+do {									\
+	(_stats_mod)->ioc_ready = false;				\
+} while (0)
+
+#define bna_stats_mod_fail(_stats_mod)					\
+do {									\
+	(_stats_mod)->ioc_ready = false;				\
+	(_stats_mod)->stats_get_busy = false;				\
+	(_stats_mod)->stats_clr_busy = false;				\
+} while (0)
+
+static void bna_bfi_attr_get(struct bna_ioceth *ioceth);
+
+bfa_fsm_state_decl(bna_ioceth, stopped, struct bna_ioceth,
+			enum bna_ioceth_event);
+bfa_fsm_state_decl(bna_ioceth, ioc_ready_wait, struct bna_ioceth,
+			enum bna_ioceth_event);
+bfa_fsm_state_decl(bna_ioceth, enet_attr_wait, struct bna_ioceth,
+			enum bna_ioceth_event);
+bfa_fsm_state_decl(bna_ioceth, ready, struct bna_ioceth,
+			enum bna_ioceth_event);
+bfa_fsm_state_decl(bna_ioceth, last_resp_wait, struct bna_ioceth,
+			enum bna_ioceth_event);
+bfa_fsm_state_decl(bna_ioceth, enet_stop_wait, struct bna_ioceth,
+			enum bna_ioceth_event);
+bfa_fsm_state_decl(bna_ioceth, ioc_disable_wait, struct bna_ioceth,
+			enum bna_ioceth_event);
+bfa_fsm_state_decl(bna_ioceth, failed, struct bna_ioceth,
+			enum bna_ioceth_event);
+
+static void
+bna_ioceth_sm_stopped_entry(struct bna_ioceth *ioceth)
+{
+	call_ioceth_stop_cbfn(ioceth);
+}
+
+static void
+bna_ioceth_sm_stopped(struct bna_ioceth *ioceth,
+			enum bna_ioceth_event event)
+{
+	switch (event) {
+	case IOCETH_E_ENABLE:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ioc_ready_wait);
+		bfa_nw_ioc_enable(&ioceth->ioc);
+		break;
+
+	case IOCETH_E_DISABLE:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_stopped);
+		break;
+
+	case IOCETH_E_IOC_RESET:
+		enable_mbox_intr(ioceth);
+		break;
+
+	case IOCETH_E_IOC_FAILED:
+		disable_mbox_intr(ioceth);
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_failed);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ioceth_sm_ioc_ready_wait_entry(struct bna_ioceth *ioceth)
+{
+	/**
+	 * Do not call bfa_nw_ioc_enable() here. It must be called in the
+	 * previous state due to failed -> ioc_ready_wait transition.
+	 */
+}
+
+static void
+bna_ioceth_sm_ioc_ready_wait(struct bna_ioceth *ioceth,
+				enum bna_ioceth_event event)
+{
+	switch (event) {
+	case IOCETH_E_DISABLE:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ioc_disable_wait);
+		bfa_nw_ioc_disable(&ioceth->ioc);
+		break;
+
+	case IOCETH_E_IOC_RESET:
+		enable_mbox_intr(ioceth);
+		break;
+
+	case IOCETH_E_IOC_FAILED:
+		disable_mbox_intr(ioceth);
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_failed);
+		break;
+
+	case IOCETH_E_IOC_READY:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_enet_attr_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ioceth_sm_enet_attr_wait_entry(struct bna_ioceth *ioceth)
+{
+	bna_bfi_attr_get(ioceth);
+}
+
+static void
+bna_ioceth_sm_enet_attr_wait(struct bna_ioceth *ioceth,
+				enum bna_ioceth_event event)
+{
+	switch (event) {
+	case IOCETH_E_DISABLE:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_last_resp_wait);
+		break;
+
+	case IOCETH_E_IOC_FAILED:
+		disable_mbox_intr(ioceth);
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_failed);
+		break;
+
+	case IOCETH_E_ENET_ATTR_RESP:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ready);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ioceth_sm_ready_entry(struct bna_ioceth *ioceth)
+{
+	bna_enet_start(&ioceth->bna->enet);
+	bna_stats_mod_start(&ioceth->bna->stats_mod);
+	bnad_cb_ioceth_ready(ioceth->bna->bnad);
+}
+
+static void
+bna_ioceth_sm_ready(struct bna_ioceth *ioceth, enum bna_ioceth_event event)
+{
+	switch (event) {
+	case IOCETH_E_DISABLE:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_enet_stop_wait);
+		break;
+
+	case IOCETH_E_IOC_FAILED:
+		disable_mbox_intr(ioceth);
+		bna_enet_fail(&ioceth->bna->enet);
+		bna_stats_mod_fail(&ioceth->bna->stats_mod);
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_failed);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ioceth_sm_last_resp_wait_entry(struct bna_ioceth *ioceth)
+{
+}
+
+static void
+bna_ioceth_sm_last_resp_wait(struct bna_ioceth *ioceth,
+				enum bna_ioceth_event event)
+{
+	switch (event) {
+	case IOCETH_E_IOC_FAILED:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ioc_disable_wait);
+		disable_mbox_intr(ioceth);
+		bfa_nw_ioc_disable(&ioceth->ioc);
+		break;
+
+	case IOCETH_E_ENET_ATTR_RESP:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ioc_disable_wait);
+		bfa_nw_ioc_disable(&ioceth->ioc);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ioceth_sm_enet_stop_wait_entry(struct bna_ioceth *ioceth)
+{
+	bna_stats_mod_stop(&ioceth->bna->stats_mod);
+	bna_enet_stop(&ioceth->bna->enet);
+}
+
+static void
+bna_ioceth_sm_enet_stop_wait(struct bna_ioceth *ioceth,
+				enum bna_ioceth_event event)
+{
+	switch (event) {
+	case IOCETH_E_IOC_FAILED:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ioc_disable_wait);
+		disable_mbox_intr(ioceth);
+		bna_enet_fail(&ioceth->bna->enet);
+		bna_stats_mod_fail(&ioceth->bna->stats_mod);
+		bfa_nw_ioc_disable(&ioceth->ioc);
+		break;
+
+	case IOCETH_E_ENET_STOPPED:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ioc_disable_wait);
+		bfa_nw_ioc_disable(&ioceth->ioc);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ioceth_sm_ioc_disable_wait_entry(struct bna_ioceth *ioceth)
+{
+}
+
+static void
+bna_ioceth_sm_ioc_disable_wait(struct bna_ioceth *ioceth,
+				enum bna_ioceth_event event)
+{
+	switch (event) {
+	case IOCETH_E_IOC_DISABLED:
+		disable_mbox_intr(ioceth);
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_stopped);
+		break;
+
+	case IOCETH_E_ENET_STOPPED:
+		/* This event is received due to enet failing */
+		/* No-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_ioceth_sm_failed_entry(struct bna_ioceth *ioceth)
+{
+	bnad_cb_ioceth_failed(ioceth->bna->bnad);
+}
+
+static void
+bna_ioceth_sm_failed(struct bna_ioceth *ioceth,
+			enum bna_ioceth_event event)
+{
+	switch (event) {
+	case IOCETH_E_DISABLE:
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ioc_disable_wait);
+		bfa_nw_ioc_disable(&ioceth->ioc);
+		break;
+
+	case IOCETH_E_IOC_RESET:
+		enable_mbox_intr(ioceth);
+		bfa_fsm_set_state(ioceth, bna_ioceth_sm_ioc_ready_wait);
+		break;
+
+	case IOCETH_E_IOC_FAILED:
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_bfi_attr_get(struct bna_ioceth *ioceth)
+{
+	struct bfi_enet_attr_req *attr_req = &ioceth->attr_req;
+
+	bfi_msgq_mhdr_set(attr_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_GET_ATTR_REQ, 0, 0);
+	attr_req->mh.num_entries = htons(
+	bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_attr_req)));
+	bfa_msgq_cmd_set(&ioceth->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_attr_req), &attr_req->mh);
+	bfa_msgq_cmd_post(&ioceth->bna->msgq, &ioceth->msgq_cmd);
+}
+
+/* IOC callback functions */
+
+static void
+bna_cb_ioceth_enable(void *arg, enum bfa_status error)
+{
+	struct bna_ioceth *ioceth = (struct bna_ioceth *)arg;
+
+	if (error)
+		bfa_fsm_send_event(ioceth, IOCETH_E_IOC_FAILED);
+	else
+		bfa_fsm_send_event(ioceth, IOCETH_E_IOC_READY);
+}
+
+static void
+bna_cb_ioceth_disable(void *arg)
+{
+	struct bna_ioceth *ioceth = (struct bna_ioceth *)arg;
+
+	bfa_fsm_send_event(ioceth, IOCETH_E_IOC_DISABLED);
+}
+
+static void
+bna_cb_ioceth_hbfail(void *arg)
+{
+	struct bna_ioceth *ioceth = (struct bna_ioceth *)arg;
+
+	bfa_fsm_send_event(ioceth, IOCETH_E_IOC_FAILED);
+}
+
+static void
+bna_cb_ioceth_reset(void *arg)
+{
+	struct bna_ioceth *ioceth = (struct bna_ioceth *)arg;
+
+	bfa_fsm_send_event(ioceth, IOCETH_E_IOC_RESET);
+}
+
+static struct bfa_ioc_cbfn bna_ioceth_cbfn = {
+	bna_cb_ioceth_enable,
+	bna_cb_ioceth_disable,
+	bna_cb_ioceth_hbfail,
+	bna_cb_ioceth_reset
+};
+
+static void
+bna_ioceth_init(struct bna_ioceth *ioceth, struct bna *bna,
+		struct bna_res_info *res_info)
+{
+	u64 dma;
+	u8 *kva;
+
+	ioceth->bna = bna;
+
+	/**
+	 * Attach IOC and claim:
+	 *	1. DMA memory for IOC attributes
+	 *	2. Kernel memory for FW trace
+	 */
+	bfa_nw_ioc_attach(&ioceth->ioc, ioceth, &bna_ioceth_cbfn);
+	bfa_nw_ioc_pci_init(&ioceth->ioc, &bna->pcidev, BFI_PCIFN_CLASS_ETH);
+
+	BNA_GET_DMA_ADDR(
+		&res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mdl[0].dma, dma);
+	kva = res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mdl[0].kva;
+	bfa_nw_ioc_mem_claim(&ioceth->ioc, kva, dma);
+
+	kva = res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.mdl[0].kva;
+
+	/**
+	 * Attach common modules (Diag, SFP, CEE, Port) and claim respective
+	 * DMA memory.
+	 */
+	BNA_GET_DMA_ADDR(
+		&res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mdl[0].dma, dma);
+	kva = res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mdl[0].kva;
+	bfa_nw_cee_attach(&bna->cee, &ioceth->ioc, bna);
+	bfa_nw_cee_mem_claim(&bna->cee, kva, dma);
+	kva += bfa_nw_cee_meminfo();
+	dma += bfa_nw_cee_meminfo();
+
+	bfa_msgq_attach(&bna->msgq, &ioceth->ioc);
+	bfa_msgq_memclaim(&bna->msgq, kva, dma);
+	bfa_msgq_regisr(&bna->msgq, BFI_MC_ENET, bna_msgq_rsp_handler, bna);
+	kva += bfa_msgq_meminfo();
+	dma += bfa_msgq_meminfo();
+
+	ioceth->stop_cbfn = NULL;
+	ioceth->stop_cbarg = NULL;
+
+	bfa_fsm_set_state(ioceth, bna_ioceth_sm_stopped);
+}
+
+static void
+bna_ioceth_uninit(struct bna_ioceth *ioceth)
+{
+	bfa_nw_ioc_detach(&ioceth->ioc);
+
+	ioceth->bna = NULL;
+}
+
+void
+bna_ioceth_enable(struct bna_ioceth *ioceth)
+{
+	if (ioceth->fsm == (bfa_fsm_t)bna_ioceth_sm_ready) {
+		bnad_cb_ioceth_ready(ioceth->bna->bnad);
+		return;
+	}
+
+	if (ioceth->fsm == (bfa_fsm_t)bna_ioceth_sm_stopped)
+		bfa_fsm_send_event(ioceth, IOCETH_E_ENABLE);
+}
+
+void
+bna_ioceth_disable(struct bna_ioceth *ioceth, enum bna_cleanup_type type)
+{
+	if (type == BNA_SOFT_CLEANUP) {
+		bnad_cb_ioceth_disabled(ioceth->bna->bnad);
+		return;
+	}
+
+	ioceth->stop_cbfn = bnad_cb_ioceth_disabled;
+	ioceth->stop_cbarg = ioceth->bna->bnad;
+
+	bfa_fsm_send_event(ioceth, IOCETH_E_DISABLE);
+}
+
+static void
+bna_ucam_mod_init(struct bna_ucam_mod *ucam_mod, struct bna *bna,
+		  struct bna_res_info *res_info)
+{
+	int i;
+
+	ucam_mod->ucmac = (struct bna_mac *)
+	res_info[BNA_MOD_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.mdl[0].kva;
+
+	INIT_LIST_HEAD(&ucam_mod->free_q);
+	for (i = 0; i < bna->ioceth.attr.num_ucmac; i++) {
+		bfa_q_qe_init(&ucam_mod->ucmac[i].qe);
+		list_add_tail(&ucam_mod->ucmac[i].qe, &ucam_mod->free_q);
+	}
+
+	ucam_mod->bna = bna;
+}
+
+static void
+bna_ucam_mod_uninit(struct bna_ucam_mod *ucam_mod)
+{
+	struct list_head *qe;
+	int i = 0;
+
+	list_for_each(qe, &ucam_mod->free_q)
+		i++;
+
+	ucam_mod->bna = NULL;
+}
+
+static void
+bna_mcam_mod_init(struct bna_mcam_mod *mcam_mod, struct bna *bna,
+		  struct bna_res_info *res_info)
+{
+	int i;
+
+	mcam_mod->mcmac = (struct bna_mac *)
+	res_info[BNA_MOD_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.mdl[0].kva;
+
+	INIT_LIST_HEAD(&mcam_mod->free_q);
+	for (i = 0; i < bna->ioceth.attr.num_mcmac; i++) {
+		bfa_q_qe_init(&mcam_mod->mcmac[i].qe);
+		list_add_tail(&mcam_mod->mcmac[i].qe, &mcam_mod->free_q);
+	}
+
+	mcam_mod->mchandle = (struct bna_mcam_handle *)
+	res_info[BNA_MOD_RES_MEM_T_MCHANDLE_ARRAY].res_u.mem_info.mdl[0].kva;
+
+	INIT_LIST_HEAD(&mcam_mod->free_handle_q);
+	for (i = 0; i < bna->ioceth.attr.num_mcmac; i++) {
+		bfa_q_qe_init(&mcam_mod->mchandle[i].qe);
+		list_add_tail(&mcam_mod->mchandle[i].qe,
+				&mcam_mod->free_handle_q);
+	}
+
+	mcam_mod->bna = bna;
+}
+
+static void
+bna_mcam_mod_uninit(struct bna_mcam_mod *mcam_mod)
+{
+	struct list_head *qe;
+	int i;
+
+	i = 0;
+	list_for_each(qe, &mcam_mod->free_q) i++;
+
+	i = 0;
+	list_for_each(qe, &mcam_mod->free_handle_q) i++;
+
+	mcam_mod->bna = NULL;
+}
+
+static void
+bna_bfi_stats_get(struct bna *bna)
+{
+	struct bfi_enet_stats_req *stats_req = &bna->stats_mod.stats_get;
+
+	bna->stats_mod.stats_get_busy = true;
+
+	bfi_msgq_mhdr_set(stats_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_STATS_GET_REQ, 0, 0);
+	stats_req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_stats_req)));
+	stats_req->stats_mask = htons(BFI_ENET_STATS_ALL);
+	stats_req->tx_enet_mask = htonl(bna->tx_mod.rid_mask);
+	stats_req->rx_enet_mask = htonl(bna->rx_mod.rid_mask);
+	stats_req->host_buffer.a32.addr_hi = bna->stats.hw_stats_dma.msb;
+	stats_req->host_buffer.a32.addr_lo = bna->stats.hw_stats_dma.lsb;
+
+	bfa_msgq_cmd_set(&bna->stats_mod.stats_get_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_stats_req), &stats_req->mh);
+	bfa_msgq_cmd_post(&bna->msgq, &bna->stats_mod.stats_get_cmd);
+}
+
+void
+bna_res_req(struct bna_res_info *res_info)
+{
+	/* DMA memory for COMMON_MODULE */
+	res_info[BNA_RES_MEM_T_COM].res_type = BNA_RES_T_MEM;
+	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
+	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.num = 1;
+	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.len = ALIGN(
+				(bfa_nw_cee_meminfo() +
+				bfa_msgq_meminfo()), PAGE_SIZE);
+
+	/* DMA memory for retrieving IOC attributes */
+	res_info[BNA_RES_MEM_T_ATTR].res_type = BNA_RES_T_MEM;
+	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
+	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.num = 1;
+	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.len =
+				ALIGN(bfa_nw_ioc_meminfo(), PAGE_SIZE);
+
+	/* Virtual memory for retreiving fw_trc */
+	res_info[BNA_RES_MEM_T_FWTRC].res_type = BNA_RES_T_MEM;
+	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.mem_type = BNA_MEM_T_KVA;
+	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.num = 0;
+	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.len = 0;
+
+	/* DMA memory for retreiving stats */
+	res_info[BNA_RES_MEM_T_STATS].res_type = BNA_RES_T_MEM;
+	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
+	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.num = 1;
+	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.len =
+				ALIGN(sizeof(struct bfi_enet_stats),
+					PAGE_SIZE);
+}
+
+void
+bna_mod_res_req(struct bna *bna, struct bna_res_info *res_info)
+{
+	struct bna_attr *attr = &bna->ioceth.attr;
+
+	/* Virtual memory for Tx objects - stored by Tx module */
+	res_info[BNA_MOD_RES_MEM_T_TX_ARRAY].res_type = BNA_RES_T_MEM;
+	res_info[BNA_MOD_RES_MEM_T_TX_ARRAY].res_u.mem_info.mem_type =
+		BNA_MEM_T_KVA;
+	res_info[BNA_MOD_RES_MEM_T_TX_ARRAY].res_u.mem_info.num = 1;
+	res_info[BNA_MOD_RES_MEM_T_TX_ARRAY].res_u.mem_info.len =
+		attr->num_txq * sizeof(struct bna_tx);
+
+	/* Virtual memory for TxQ - stored by Tx module */
+	res_info[BNA_MOD_RES_MEM_T_TXQ_ARRAY].res_type = BNA_RES_T_MEM;
+	res_info[BNA_MOD_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.mem_type =
+		BNA_MEM_T_KVA;
+	res_info[BNA_MOD_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.num = 1;
+	res_info[BNA_MOD_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.len =
+		attr->num_txq * sizeof(struct bna_txq);
+
+	/* Virtual memory for Rx objects - stored by Rx module */
+	res_info[BNA_MOD_RES_MEM_T_RX_ARRAY].res_type = BNA_RES_T_MEM;
+	res_info[BNA_MOD_RES_MEM_T_RX_ARRAY].res_u.mem_info.mem_type =
+		BNA_MEM_T_KVA;
+	res_info[BNA_MOD_RES_MEM_T_RX_ARRAY].res_u.mem_info.num = 1;
+	res_info[BNA_MOD_RES_MEM_T_RX_ARRAY].res_u.mem_info.len =
+		attr->num_rxp * sizeof(struct bna_rx);
+
+	/* Virtual memory for RxPath - stored by Rx module */
+	res_info[BNA_MOD_RES_MEM_T_RXP_ARRAY].res_type = BNA_RES_T_MEM;
+	res_info[BNA_MOD_RES_MEM_T_RXP_ARRAY].res_u.mem_info.mem_type =
+		BNA_MEM_T_KVA;
+	res_info[BNA_MOD_RES_MEM_T_RXP_ARRAY].res_u.mem_info.num = 1;
+	res_info[BNA_MOD_RES_MEM_T_RXP_ARRAY].res_u.mem_info.len =
+		attr->num_rxp * sizeof(struct bna_rxp);
+
+	/* Virtual memory for RxQ - stored by Rx module */
+	res_info[BNA_MOD_RES_MEM_T_RXQ_ARRAY].res_type = BNA_RES_T_MEM;
+	res_info[BNA_MOD_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.mem_type =
+		BNA_MEM_T_KVA;
+	res_info[BNA_MOD_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.num = 1;
+	res_info[BNA_MOD_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.len =
+		(attr->num_rxp * 2) * sizeof(struct bna_rxq);
+
+	/* Virtual memory for Unicast MAC address - stored by ucam module */
+	res_info[BNA_MOD_RES_MEM_T_UCMAC_ARRAY].res_type = BNA_RES_T_MEM;
+	res_info[BNA_MOD_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.mem_type =
+		BNA_MEM_T_KVA;
+	res_info[BNA_MOD_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.num = 1;
+	res_info[BNA_MOD_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.len =
+		attr->num_ucmac * sizeof(struct bna_mac);
+
+	/* Virtual memory for Multicast MAC address - stored by mcam module */
+	res_info[BNA_MOD_RES_MEM_T_MCMAC_ARRAY].res_type = BNA_RES_T_MEM;
+	res_info[BNA_MOD_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.mem_type =
+		BNA_MEM_T_KVA;
+	res_info[BNA_MOD_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.num = 1;
+	res_info[BNA_MOD_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.len =
+		attr->num_mcmac * sizeof(struct bna_mac);
+
+	/* Virtual memory for Multicast handle - stored by mcam module */
+	res_info[BNA_MOD_RES_MEM_T_MCHANDLE_ARRAY].res_type = BNA_RES_T_MEM;
+	res_info[BNA_MOD_RES_MEM_T_MCHANDLE_ARRAY].res_u.mem_info.mem_type =
+		BNA_MEM_T_KVA;
+	res_info[BNA_MOD_RES_MEM_T_MCHANDLE_ARRAY].res_u.mem_info.num = 1;
+	res_info[BNA_MOD_RES_MEM_T_MCHANDLE_ARRAY].res_u.mem_info.len =
+		attr->num_mcmac * sizeof(struct bna_mcam_handle);
+}
+
+void
+bna_init(struct bna *bna, struct bnad *bnad,
+		struct bfa_pcidev *pcidev, struct bna_res_info *res_info)
+{
+	bna->bnad = bnad;
+	bna->pcidev = *pcidev;
+
+	bna->stats.hw_stats_kva = (struct bfi_enet_stats *)
+		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].kva;
+	bna->stats.hw_stats_dma.msb =
+		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].dma.msb;
+	bna->stats.hw_stats_dma.lsb =
+		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].dma.lsb;
+
+	bna_reg_addr_init(bna, &bna->pcidev);
+
+	/* Also initializes diag, cee, sfp, phy_port, msgq */
+	bna_ioceth_init(&bna->ioceth, bna, res_info);
+
+	bna_enet_init(&bna->enet, bna);
+	bna_ethport_init(&bna->ethport, bna);
+}
+
+void
+bna_mod_init(struct bna *bna, struct bna_res_info *res_info)
+{
+	bna_tx_mod_init(&bna->tx_mod, bna, res_info);
+
+	bna_rx_mod_init(&bna->rx_mod, bna, res_info);
+
+	bna_ucam_mod_init(&bna->ucam_mod, bna, res_info);
+
+	bna_mcam_mod_init(&bna->mcam_mod, bna, res_info);
+
+	bna->default_mode_rid = BFI_INVALID_RID;
+	bna->promisc_rid = BFI_INVALID_RID;
+
+	bna->mod_flags |= BNA_MOD_F_INIT_DONE;
+}
+
+void
+bna_uninit(struct bna *bna)
+{
+	if (bna->mod_flags & BNA_MOD_F_INIT_DONE) {
+		bna_mcam_mod_uninit(&bna->mcam_mod);
+		bna_ucam_mod_uninit(&bna->ucam_mod);
+		bna_rx_mod_uninit(&bna->rx_mod);
+		bna_tx_mod_uninit(&bna->tx_mod);
+		bna->mod_flags &= ~BNA_MOD_F_INIT_DONE;
+	}
+
+	bna_stats_mod_uninit(&bna->stats_mod);
+	bna_ethport_uninit(&bna->ethport);
+	bna_enet_uninit(&bna->enet);
+
+	bna_ioceth_uninit(&bna->ioceth);
+
+	bna->bnad = NULL;
+}
+
+int
+bna_num_txq_set(struct bna *bna, int num_txq)
+{
+	if (num_txq > 0 && (num_txq <= bna->ioceth.attr.num_txq)) {
+		bna->ioceth.attr.num_txq = num_txq;
+		return BNA_CB_SUCCESS;
+	}
+
+	return BNA_CB_FAIL;
+}
+
+int
+bna_num_rxp_set(struct bna *bna, int num_rxp)
+{
+	if (num_rxp > 0 && (num_rxp <= bna->ioceth.attr.num_rxp)) {
+		bna->ioceth.attr.num_rxp = num_rxp;
+		return BNA_CB_SUCCESS;
+	}
+
+	return BNA_CB_FAIL;
+}
+
+struct bna_mac *
+bna_ucam_mod_mac_get(struct bna_ucam_mod *ucam_mod)
+{
+	struct list_head *qe;
+
+	if (list_empty(&ucam_mod->free_q))
+		return NULL;
+
+	bfa_q_deq(&ucam_mod->free_q, &qe);
+
+	return (struct bna_mac *)qe;
+}
+
+void
+bna_ucam_mod_mac_put(struct bna_ucam_mod *ucam_mod, struct bna_mac *mac)
+{
+	list_add_tail(&mac->qe, &ucam_mod->free_q);
+}
+
+struct bna_mac *
+bna_mcam_mod_mac_get(struct bna_mcam_mod *mcam_mod)
+{
+	struct list_head *qe;
+
+	if (list_empty(&mcam_mod->free_q))
+		return NULL;
+
+	bfa_q_deq(&mcam_mod->free_q, &qe);
+
+	return (struct bna_mac *)qe;
+}
+
+void
+bna_mcam_mod_mac_put(struct bna_mcam_mod *mcam_mod, struct bna_mac *mac)
+{
+	list_add_tail(&mac->qe, &mcam_mod->free_q);
+}
+
+struct bna_mcam_handle *
+bna_mcam_mod_handle_get(struct bna_mcam_mod *mcam_mod)
+{
+	struct list_head *qe;
+
+	if (list_empty(&mcam_mod->free_handle_q))
+		return NULL;
+
+	bfa_q_deq(&mcam_mod->free_handle_q, &qe);
+
+	return (struct bna_mcam_handle *)qe;
+}
+
+void
+bna_mcam_mod_handle_put(struct bna_mcam_mod *mcam_mod,
+			struct bna_mcam_handle *handle)
+{
+	list_add_tail(&handle->qe, &mcam_mod->free_handle_q);
+}
+
+void
+bna_hw_stats_get(struct bna *bna)
+{
+	if (!bna->stats_mod.ioc_ready) {
+		bnad_cb_stats_get(bna->bnad, BNA_CB_FAIL, &bna->stats);
+		return;
+	}
+	if (bna->stats_mod.stats_get_busy) {
+		bnad_cb_stats_get(bna->bnad, BNA_CB_BUSY, &bna->stats);
+		return;
+	}
+
+	bna_bfi_stats_get(bna);
+}
diff --git a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
new file mode 100644
index 000000000000..07bb79289824
--- /dev/null
+++ b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
@@ -0,0 +1,413 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+/**
+ * File for interrupt macros and functions
+ */
+
+#ifndef __BNA_HW_DEFS_H__
+#define __BNA_HW_DEFS_H__
+
+#include "bfi_reg.h"
+
+/**
+ *
+ * SW imposed limits
+ *
+ */
+
+#define BFI_ENET_MAX_MCAM		256
+
+#define BFI_INVALID_RID			-1
+
+#define BFI_IBIDX_SIZE			4
+
+#define BFI_VLAN_WORD_SHIFT		5	/* 32 bits */
+#define BFI_VLAN_WORD_MASK		0x1F
+#define BFI_VLAN_BLOCK_SHIFT		9	/* 512 bits */
+#define BFI_VLAN_BMASK_ALL		0xFF
+
+#define BFI_COALESCING_TIMER_UNIT	5	/* 5us */
+#define BFI_MAX_COALESCING_TIMEO	0xFF	/* in 5us units */
+#define BFI_MAX_INTERPKT_COUNT		0xFF
+#define BFI_MAX_INTERPKT_TIMEO		0xF	/* in 0.5us units */
+#define BFI_TX_COALESCING_TIMEO		20	/* 20 * 5 = 100us */
+#define BFI_TX_INTERPKT_COUNT		32
+#define	BFI_RX_COALESCING_TIMEO		12	/* 12 * 5 = 60us */
+#define	BFI_RX_INTERPKT_COUNT		6	/* Pkt Cnt = 6 */
+#define	BFI_RX_INTERPKT_TIMEO		3	/* 3 * 0.5 = 1.5us */
+
+#define BFI_TXQ_WI_SIZE			64	/* bytes */
+#define BFI_RXQ_WI_SIZE			8	/* bytes */
+#define BFI_CQ_WI_SIZE			16	/* bytes */
+#define BFI_TX_MAX_WRR_QUOTA		0xFFF
+
+#define BFI_TX_MAX_VECTORS_PER_WI	4
+#define BFI_TX_MAX_VECTORS_PER_PKT	0xFF
+#define BFI_TX_MAX_DATA_PER_VECTOR	0xFFFF
+#define BFI_TX_MAX_DATA_PER_PKT		0xFFFFFF
+
+/* Small Q buffer size */
+#define BFI_SMALL_RXBUF_SIZE		128
+
+#define BFI_TX_MAX_PRIO			8
+#define BFI_TX_PRIO_MAP_ALL		0xFF
+
+/*
+ *
+ * Register definitions and macros
+ *
+ */
+
+#define BNA_PCI_REG_CT_ADDRSZ		(0x40000)
+
+#define ct_reg_addr_init(_bna, _pcidev)					\
+{									\
+	struct bna_reg_offset reg_offset[] =				\
+	{{HOSTFN0_INT_STATUS, HOSTFN0_INT_MSK},				\
+	 {HOSTFN1_INT_STATUS, HOSTFN1_INT_MSK},				\
+	 {HOSTFN2_INT_STATUS, HOSTFN2_INT_MSK},				\
+	 {HOSTFN3_INT_STATUS, HOSTFN3_INT_MSK} };			\
+									\
+	(_bna)->regs.fn_int_status = (_pcidev)->pci_bar_kva +		\
+				reg_offset[(_pcidev)->pci_func].fn_int_status;\
+	(_bna)->regs.fn_int_mask = (_pcidev)->pci_bar_kva +		\
+				reg_offset[(_pcidev)->pci_func].fn_int_mask;\
+}
+
+#define ct_bit_defn_init(_bna, _pcidev)					\
+{									\
+	(_bna)->bits.mbox_status_bits = (__HFN_INT_MBOX_LPU0 |		\
+					__HFN_INT_MBOX_LPU1);		\
+	(_bna)->bits.mbox_mask_bits = (__HFN_INT_MBOX_LPU0 |		\
+					__HFN_INT_MBOX_LPU1);		\
+	(_bna)->bits.error_status_bits = (__HFN_INT_ERR_MASK);		\
+	(_bna)->bits.error_mask_bits = (__HFN_INT_ERR_MASK);		\
+	(_bna)->bits.halt_status_bits = __HFN_INT_LL_HALT;		\
+}
+
+#define ct2_reg_addr_init(_bna, _pcidev)				\
+{									\
+	(_bna)->regs.fn_int_status = (_pcidev)->pci_bar_kva +		\
+				CT2_HOSTFN_INT_STATUS;			\
+	(_bna)->regs.fn_int_mask = (_pcidev)->pci_bar_kva +		\
+				CT2_HOSTFN_INTR_MASK;			\
+}
+
+#define ct2_bit_defn_init(_bna, _pcidev)				\
+{									\
+	(_bna)->bits.mbox_status_bits = (__HFN_INT_MBOX_LPU0_CT2 |	\
+					__HFN_INT_MBOX_LPU1_CT2);	\
+	(_bna)->bits.mbox_mask_bits = (__HFN_INT_MBOX_LPU0_CT2 |	\
+					__HFN_INT_MBOX_LPU1_CT2);	\
+	(_bna)->bits.error_status_bits = (__HFN_INT_ERR_MASK_CT2);	\
+	(_bna)->bits.error_mask_bits = (__HFN_INT_ERR_MASK_CT2);	\
+	(_bna)->bits.halt_status_bits = __HFN_INT_CPQ_HALT_CT2;		\
+	(_bna)->bits.halt_mask_bits = __HFN_INT_CPQ_HALT_CT2;		\
+}
+
+#define bna_reg_addr_init(_bna, _pcidev)				\
+{									\
+	switch ((_pcidev)->device_id) {					\
+	case PCI_DEVICE_ID_BROCADE_CT:					\
+		ct_reg_addr_init((_bna), (_pcidev));			\
+		ct_bit_defn_init((_bna), (_pcidev));			\
+		break;							\
+	}								\
+}
+
+#define bna_port_id_get(_bna) ((_bna)->ioceth.ioc.port_id)
+/**
+ *
+ *  Interrupt related bits, flags and macros
+ *
+ */
+
+#define IB_STATUS_BITS		0x0000ffff
+
+#define BNA_IS_MBOX_INTR(_bna, _intr_status)				\
+	((_intr_status) & (_bna)->bits.mbox_status_bits)
+
+#define BNA_IS_HALT_INTR(_bna, _intr_status)				\
+	((_intr_status) & (_bna)->bits.halt_status_bits)
+
+#define BNA_IS_ERR_INTR(_bna, _intr_status)	\
+	((_intr_status) & (_bna)->bits.error_status_bits)
+
+#define BNA_IS_MBOX_ERR_INTR(_bna, _intr_status)	\
+	(BNA_IS_MBOX_INTR(_bna, _intr_status) |		\
+	BNA_IS_ERR_INTR(_bna, _intr_status))
+
+#define BNA_IS_INTX_DATA_INTR(_intr_status)		\
+		((_intr_status) & IB_STATUS_BITS)
+
+#define bna_halt_clear(_bna)						\
+do {									\
+	u32 init_halt;						\
+	init_halt = readl((_bna)->ioceth.ioc.ioc_regs.ll_halt);	\
+	init_halt &= ~__FW_INIT_HALT_P;					\
+	writel(init_halt, (_bna)->ioceth.ioc.ioc_regs.ll_halt);	\
+	init_halt = readl((_bna)->ioceth.ioc.ioc_regs.ll_halt);	\
+} while (0)
+
+#define bna_intx_disable(_bna, _cur_mask)				\
+{									\
+	(_cur_mask) = readl((_bna)->regs.fn_int_mask);		\
+	writel(0xffffffff, (_bna)->regs.fn_int_mask);		\
+}
+
+#define bna_intx_enable(bna, new_mask)					\
+	writel((new_mask), (bna)->regs.fn_int_mask)
+#define bna_mbox_intr_disable(bna)					\
+do {									\
+	u32 mask;							\
+	mask = readl((bna)->regs.fn_int_mask);				\
+	writel((mask | (bna)->bits.mbox_mask_bits |			\
+		(bna)->bits.error_mask_bits), (bna)->regs.fn_int_mask); \
+	mask = readl((bna)->regs.fn_int_mask);				\
+} while (0)
+
+#define bna_mbox_intr_enable(bna)					\
+do {									\
+	u32 mask;							\
+	mask = readl((bna)->regs.fn_int_mask);				\
+	writel((mask & ~((bna)->bits.mbox_mask_bits |			\
+		(bna)->bits.error_mask_bits)), (bna)->regs.fn_int_mask);\
+	mask = readl((bna)->regs.fn_int_mask);				\
+} while (0)
+
+#define bna_intr_status_get(_bna, _status)				\
+{									\
+	(_status) = readl((_bna)->regs.fn_int_status);			\
+	if (_status) {							\
+		writel(((_status) & ~(_bna)->bits.mbox_status_bits),	\
+			(_bna)->regs.fn_int_status);			\
+	}								\
+}
+
+/*
+ * MAX ACK EVENTS : No. of acks that can be accumulated in driver,
+ * before acking to h/w. The no. of bits is 16 in the doorbell register,
+ * however we keep this limited to 15 bits.
+ * This is because around the edge of 64K boundary (16 bits), one
+ * single poll can make the accumulated ACK counter cross the 64K boundary,
+ * causing problems, when we try to ack with a value greater than 64K.
+ * 15 bits (32K) should  be large enough to accumulate, anyways, and the max.
+ * acked events to h/w can be (32K + max poll weight) (currently 64).
+ */
+#define	BNA_IB_MAX_ACK_EVENTS		(1 << 15)
+
+/* These macros build the data portion of the TxQ/RxQ doorbell */
+#define BNA_DOORBELL_Q_PRD_IDX(_pi)	(0x80000000 | (_pi))
+#define BNA_DOORBELL_Q_STOP		(0x40000000)
+
+/* These macros build the data portion of the IB doorbell */
+#define BNA_DOORBELL_IB_INT_ACK(_timeout, _events)			\
+	(0x80000000 | ((_timeout) << 16) | (_events))
+#define BNA_DOORBELL_IB_INT_DISABLE	(0x40000000)
+
+/* Set the coalescing timer for the given ib */
+#define bna_ib_coalescing_timer_set(_i_dbell, _cls_timer)		\
+	((_i_dbell)->doorbell_ack = BNA_DOORBELL_IB_INT_ACK((_cls_timer), 0));
+
+/* Acks 'events' # of events for a given ib while disabling interrupts */
+#define bna_ib_ack_disable_irq(_i_dbell, _events)			\
+	(writel(BNA_DOORBELL_IB_INT_ACK(0, (_events)), \
+		(_i_dbell)->doorbell_addr));
+
+/* Acks 'events' # of events for a given ib */
+#define bna_ib_ack(_i_dbell, _events)					\
+	(writel(((_i_dbell)->doorbell_ack | (_events)), \
+		(_i_dbell)->doorbell_addr));
+
+#define bna_ib_start(_bna, _ib, _is_regular)				\
+{									\
+	u32 intx_mask;						\
+	struct bna_ib *ib = _ib;					\
+	if ((ib->intr_type == BNA_INTR_T_INTX)) {			\
+		bna_intx_disable((_bna), intx_mask);			\
+		intx_mask &= ~(ib->intr_vector);			\
+		bna_intx_enable((_bna), intx_mask);			\
+	}								\
+	bna_ib_coalescing_timer_set(&ib->door_bell,			\
+			ib->coalescing_timeo);				\
+	if (_is_regular)						\
+		bna_ib_ack(&ib->door_bell, 0);				\
+}
+
+#define bna_ib_stop(_bna, _ib)						\
+{									\
+	u32 intx_mask;						\
+	struct bna_ib *ib = _ib;					\
+	writel(BNA_DOORBELL_IB_INT_DISABLE,				\
+		ib->door_bell.doorbell_addr);				\
+	if (ib->intr_type == BNA_INTR_T_INTX) {				\
+		bna_intx_disable((_bna), intx_mask);			\
+		intx_mask |= ib->intr_vector;				\
+		bna_intx_enable((_bna), intx_mask);			\
+	}								\
+}
+
+#define bna_txq_prod_indx_doorbell(_tcb)				\
+	(writel(BNA_DOORBELL_Q_PRD_IDX((_tcb)->producer_index), \
+		(_tcb)->q_dbell));
+
+#define bna_rxq_prod_indx_doorbell(_rcb)				\
+	(writel(BNA_DOORBELL_Q_PRD_IDX((_rcb)->producer_index), \
+		(_rcb)->q_dbell));
+
+/**
+ *
+ * TxQ, RxQ, CQ related bits, offsets, macros
+ *
+ */
+
+/* TxQ Entry Opcodes */
+#define BNA_TXQ_WI_SEND			(0x402)	/* Single Frame Transmission */
+#define BNA_TXQ_WI_SEND_LSO		(0x403)	/* Multi-Frame Transmission */
+#define BNA_TXQ_WI_EXTENSION		(0x104)	/* Extension WI */
+
+/* TxQ Entry Control Flags */
+#define BNA_TXQ_WI_CF_FCOE_CRC		(1 << 8)
+#define BNA_TXQ_WI_CF_IPID_MODE		(1 << 5)
+#define BNA_TXQ_WI_CF_INS_PRIO		(1 << 4)
+#define BNA_TXQ_WI_CF_INS_VLAN		(1 << 3)
+#define BNA_TXQ_WI_CF_UDP_CKSUM		(1 << 2)
+#define BNA_TXQ_WI_CF_TCP_CKSUM		(1 << 1)
+#define BNA_TXQ_WI_CF_IP_CKSUM		(1 << 0)
+
+#define BNA_TXQ_WI_L4_HDR_N_OFFSET(_hdr_size, _offset) \
+		(((_hdr_size) << 10) | ((_offset) & 0x3FF))
+
+/*
+ * Completion Q defines
+ */
+/* CQ Entry Flags */
+#define	BNA_CQ_EF_MAC_ERROR	(1 <<  0)
+#define	BNA_CQ_EF_FCS_ERROR	(1 <<  1)
+#define	BNA_CQ_EF_TOO_LONG	(1 <<  2)
+#define	BNA_CQ_EF_FC_CRC_OK	(1 <<  3)
+
+#define	BNA_CQ_EF_RSVD1		(1 <<  4)
+#define	BNA_CQ_EF_L4_CKSUM_OK	(1 <<  5)
+#define	BNA_CQ_EF_L3_CKSUM_OK	(1 <<  6)
+#define	BNA_CQ_EF_HDS_HEADER	(1 <<  7)
+
+#define	BNA_CQ_EF_UDP		(1 <<  8)
+#define	BNA_CQ_EF_TCP		(1 <<  9)
+#define	BNA_CQ_EF_IP_OPTIONS	(1 << 10)
+#define	BNA_CQ_EF_IPV6		(1 << 11)
+
+#define	BNA_CQ_EF_IPV4		(1 << 12)
+#define	BNA_CQ_EF_VLAN		(1 << 13)
+#define	BNA_CQ_EF_RSS		(1 << 14)
+#define	BNA_CQ_EF_RSVD2		(1 << 15)
+
+#define	BNA_CQ_EF_MCAST_MATCH   (1 << 16)
+#define	BNA_CQ_EF_MCAST		(1 << 17)
+#define BNA_CQ_EF_BCAST		(1 << 18)
+#define	BNA_CQ_EF_REMOTE	(1 << 19)
+
+#define	BNA_CQ_EF_LOCAL		(1 << 20)
+
+/**
+ *
+ * Data structures
+ *
+ */
+
+struct bna_reg_offset {
+	u32 fn_int_status;
+	u32 fn_int_mask;
+};
+
+struct bna_bit_defn {
+	u32 mbox_status_bits;
+	u32 mbox_mask_bits;
+	u32 error_status_bits;
+	u32 error_mask_bits;
+	u32 halt_status_bits;
+	u32 halt_mask_bits;
+};
+
+struct bna_reg {
+	void __iomem *fn_int_status;
+	void __iomem *fn_int_mask;
+};
+
+/* TxQ Vector (a.k.a. Tx-Buffer Descriptor) */
+struct bna_dma_addr {
+	u32		msb;
+	u32		lsb;
+};
+
+struct bna_txq_wi_vector {
+	u16		reserved;
+	u16		length;		/* Only 14 LSB are valid */
+	struct bna_dma_addr host_addr; /* Tx-Buf DMA addr */
+};
+
+/**
+ *  TxQ Entry Structure
+ *
+ *  BEWARE:  Load values into this structure with correct endianess.
+ */
+struct bna_txq_entry {
+	union {
+		struct {
+			u8 reserved;
+			u8 num_vectors;	/* number of vectors present */
+			u16 opcode; /* Either */
+						    /* BNA_TXQ_WI_SEND or */
+						    /* BNA_TXQ_WI_SEND_LSO */
+			u16 flags; /* OR of all the flags */
+			u16 l4_hdr_size_n_offset;
+			u16 vlan_tag;
+			u16 lso_mss;	/* Only 14 LSB are valid */
+			u32 frame_length;	/* Only 24 LSB are valid */
+		} wi;
+
+		struct {
+			u16 reserved;
+			u16 opcode; /* Must be */
+						    /* BNA_TXQ_WI_EXTENSION */
+			u32 reserved2[3];	/* Place holder for */
+						/* removed vector (12 bytes) */
+		} wi_ext;
+	} hdr;
+	struct bna_txq_wi_vector vector[4];
+};
+
+/* RxQ Entry Structure */
+struct bna_rxq_entry {		/* Rx-Buffer */
+	struct bna_dma_addr host_addr; /* Rx-Buffer DMA address */
+};
+
+/* CQ Entry Structure */
+struct bna_cq_entry {
+	u32 flags;
+	u16 vlan_tag;
+	u16 length;
+	u32 rss_hash;
+	u8 valid;
+	u8 reserved1;
+	u8 reserved2;
+	u8 rxq_id;
+};
+
+#endif /* __BNA_HW_DEFS_H__ */
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
new file mode 100644
index 000000000000..92214137ca32
--- /dev/null
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -0,0 +1,3787 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+  */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+#include "bna.h"
+#include "bfi.h"
+
+/**
+ * IB
+ */
+static void
+bna_ib_coalescing_timeo_set(struct bna_ib *ib, u8 coalescing_timeo)
+{
+	ib->coalescing_timeo = coalescing_timeo;
+	ib->door_bell.doorbell_ack = BNA_DOORBELL_IB_INT_ACK(
+				(u32)ib->coalescing_timeo, 0);
+}
+
+/**
+ * RXF
+ */
+
+#define bna_rxf_vlan_cfg_soft_reset(rxf)				\
+do {									\
+	(rxf)->vlan_pending_bitmask = (u8)BFI_VLAN_BMASK_ALL;		\
+	(rxf)->vlan_strip_pending = true;				\
+} while (0)
+
+#define bna_rxf_rss_cfg_soft_reset(rxf)					\
+do {									\
+	if ((rxf)->rss_status == BNA_STATUS_T_ENABLED)			\
+		(rxf)->rss_pending = (BNA_RSS_F_RIT_PENDING |		\
+				BNA_RSS_F_CFG_PENDING |			\
+				BNA_RSS_F_STATUS_PENDING);		\
+} while (0)
+
+static int bna_rxf_cfg_apply(struct bna_rxf *rxf);
+static void bna_rxf_cfg_reset(struct bna_rxf *rxf);
+static int bna_rxf_fltr_clear(struct bna_rxf *rxf);
+static int bna_rxf_ucast_cfg_apply(struct bna_rxf *rxf);
+static int bna_rxf_promisc_cfg_apply(struct bna_rxf *rxf);
+static int bna_rxf_allmulti_cfg_apply(struct bna_rxf *rxf);
+static int bna_rxf_vlan_strip_cfg_apply(struct bna_rxf *rxf);
+static int bna_rxf_ucast_cfg_reset(struct bna_rxf *rxf,
+					enum bna_cleanup_type cleanup);
+static int bna_rxf_promisc_cfg_reset(struct bna_rxf *rxf,
+					enum bna_cleanup_type cleanup);
+static int bna_rxf_allmulti_cfg_reset(struct bna_rxf *rxf,
+					enum bna_cleanup_type cleanup);
+
+bfa_fsm_state_decl(bna_rxf, stopped, struct bna_rxf,
+			enum bna_rxf_event);
+bfa_fsm_state_decl(bna_rxf, paused, struct bna_rxf,
+			enum bna_rxf_event);
+bfa_fsm_state_decl(bna_rxf, cfg_wait, struct bna_rxf,
+			enum bna_rxf_event);
+bfa_fsm_state_decl(bna_rxf, started, struct bna_rxf,
+			enum bna_rxf_event);
+bfa_fsm_state_decl(bna_rxf, fltr_clr_wait, struct bna_rxf,
+			enum bna_rxf_event);
+bfa_fsm_state_decl(bna_rxf, last_resp_wait, struct bna_rxf,
+			enum bna_rxf_event);
+
+static void
+bna_rxf_sm_stopped_entry(struct bna_rxf *rxf)
+{
+	call_rxf_stop_cbfn(rxf);
+}
+
+static void
+bna_rxf_sm_stopped(struct bna_rxf *rxf, enum bna_rxf_event event)
+{
+	switch (event) {
+	case RXF_E_START:
+		if (rxf->flags & BNA_RXF_F_PAUSED) {
+			bfa_fsm_set_state(rxf, bna_rxf_sm_paused);
+			call_rxf_start_cbfn(rxf);
+		} else
+			bfa_fsm_set_state(rxf, bna_rxf_sm_cfg_wait);
+		break;
+
+	case RXF_E_STOP:
+		call_rxf_stop_cbfn(rxf);
+		break;
+
+	case RXF_E_FAIL:
+		/* No-op */
+		break;
+
+	case RXF_E_CONFIG:
+		call_rxf_cam_fltr_cbfn(rxf);
+		break;
+
+	case RXF_E_PAUSE:
+		rxf->flags |= BNA_RXF_F_PAUSED;
+		call_rxf_pause_cbfn(rxf);
+		break;
+
+	case RXF_E_RESUME:
+		rxf->flags &= ~BNA_RXF_F_PAUSED;
+		call_rxf_resume_cbfn(rxf);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_rxf_sm_paused_entry(struct bna_rxf *rxf)
+{
+	call_rxf_pause_cbfn(rxf);
+}
+
+static void
+bna_rxf_sm_paused(struct bna_rxf *rxf, enum bna_rxf_event event)
+{
+	switch (event) {
+	case RXF_E_STOP:
+	case RXF_E_FAIL:
+		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
+		break;
+
+	case RXF_E_CONFIG:
+		call_rxf_cam_fltr_cbfn(rxf);
+		break;
+
+	case RXF_E_RESUME:
+		rxf->flags &= ~BNA_RXF_F_PAUSED;
+		bfa_fsm_set_state(rxf, bna_rxf_sm_cfg_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_rxf_sm_cfg_wait_entry(struct bna_rxf *rxf)
+{
+	if (!bna_rxf_cfg_apply(rxf)) {
+		/* No more pending config updates */
+		bfa_fsm_set_state(rxf, bna_rxf_sm_started);
+	}
+}
+
+static void
+bna_rxf_sm_cfg_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
+{
+	switch (event) {
+	case RXF_E_STOP:
+		bfa_fsm_set_state(rxf, bna_rxf_sm_last_resp_wait);
+		break;
+
+	case RXF_E_FAIL:
+		bna_rxf_cfg_reset(rxf);
+		call_rxf_start_cbfn(rxf);
+		call_rxf_cam_fltr_cbfn(rxf);
+		call_rxf_resume_cbfn(rxf);
+		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
+		break;
+
+	case RXF_E_CONFIG:
+		/* No-op */
+		break;
+
+	case RXF_E_PAUSE:
+		rxf->flags |= BNA_RXF_F_PAUSED;
+		call_rxf_start_cbfn(rxf);
+		bfa_fsm_set_state(rxf, bna_rxf_sm_fltr_clr_wait);
+		break;
+
+	case RXF_E_FW_RESP:
+		if (!bna_rxf_cfg_apply(rxf)) {
+			/* No more pending config updates */
+			bfa_fsm_set_state(rxf, bna_rxf_sm_started);
+		}
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_rxf_sm_started_entry(struct bna_rxf *rxf)
+{
+	call_rxf_start_cbfn(rxf);
+	call_rxf_cam_fltr_cbfn(rxf);
+	call_rxf_resume_cbfn(rxf);
+}
+
+static void
+bna_rxf_sm_started(struct bna_rxf *rxf, enum bna_rxf_event event)
+{
+	switch (event) {
+	case RXF_E_STOP:
+	case RXF_E_FAIL:
+		bna_rxf_cfg_reset(rxf);
+		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
+		break;
+
+	case RXF_E_CONFIG:
+		bfa_fsm_set_state(rxf, bna_rxf_sm_cfg_wait);
+		break;
+
+	case RXF_E_PAUSE:
+		rxf->flags |= BNA_RXF_F_PAUSED;
+		if (!bna_rxf_fltr_clear(rxf))
+			bfa_fsm_set_state(rxf, bna_rxf_sm_paused);
+		else
+			bfa_fsm_set_state(rxf, bna_rxf_sm_fltr_clr_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_rxf_sm_fltr_clr_wait_entry(struct bna_rxf *rxf)
+{
+}
+
+static void
+bna_rxf_sm_fltr_clr_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
+{
+	switch (event) {
+	case RXF_E_FAIL:
+		bna_rxf_cfg_reset(rxf);
+		call_rxf_pause_cbfn(rxf);
+		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
+		break;
+
+	case RXF_E_FW_RESP:
+		if (!bna_rxf_fltr_clear(rxf)) {
+			/* No more pending CAM entries to clear */
+			bfa_fsm_set_state(rxf, bna_rxf_sm_paused);
+		}
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_rxf_sm_last_resp_wait_entry(struct bna_rxf *rxf)
+{
+}
+
+static void
+bna_rxf_sm_last_resp_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
+{
+	switch (event) {
+	case RXF_E_FAIL:
+	case RXF_E_FW_RESP:
+		bna_rxf_cfg_reset(rxf);
+		bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_bfi_ucast_req(struct bna_rxf *rxf, struct bna_mac *mac,
+		enum bfi_enet_h2i_msgs req_type)
+{
+	struct bfi_enet_ucast_req *req = &rxf->bfi_enet_cmd.ucast_req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET, req_type, 0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+	bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_ucast_req)));
+	memcpy(&req->mac_addr, &mac->addr, sizeof(mac_t));
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_ucast_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_mcast_add_req(struct bna_rxf *rxf, struct bna_mac *mac)
+{
+	struct bfi_enet_mcast_add_req *req =
+		&rxf->bfi_enet_cmd.mcast_add_req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET, BFI_ENET_H2I_MAC_MCAST_ADD_REQ,
+		0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+	bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_mcast_add_req)));
+	memcpy(&req->mac_addr, &mac->addr, sizeof(mac_t));
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_mcast_add_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_mcast_del_req(struct bna_rxf *rxf, u16 handle)
+{
+	struct bfi_enet_mcast_del_req *req =
+		&rxf->bfi_enet_cmd.mcast_del_req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET, BFI_ENET_H2I_MAC_MCAST_DEL_REQ,
+		0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+	bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_mcast_del_req)));
+	req->handle = htons(handle);
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_mcast_del_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_mcast_filter_req(struct bna_rxf *rxf, enum bna_status status)
+{
+	struct bfi_enet_enable_req *req = &rxf->bfi_enet_cmd.req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_MAC_MCAST_FILTER_REQ, 0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_enable_req)));
+	req->enable = status;
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_enable_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_rx_promisc_req(struct bna_rxf *rxf, enum bna_status status)
+{
+	struct bfi_enet_enable_req *req = &rxf->bfi_enet_cmd.req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_RX_PROMISCUOUS_REQ, 0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_enable_req)));
+	req->enable = status;
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_enable_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_rx_vlan_filter_set(struct bna_rxf *rxf, u8 block_idx)
+{
+	struct bfi_enet_rx_vlan_req *req = &rxf->bfi_enet_cmd.vlan_req;
+	int i;
+	int j;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_RX_VLAN_SET_REQ, 0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_rx_vlan_req)));
+	req->block_idx = block_idx;
+	for (i = 0; i < (BFI_ENET_VLAN_BLOCK_SIZE / 32); i++) {
+		j = (block_idx * (BFI_ENET_VLAN_BLOCK_SIZE / 32)) + i;
+		if (rxf->vlan_filter_status == BNA_STATUS_T_ENABLED)
+			req->bit_mask[i] =
+				htonl(rxf->vlan_filter_table[j]);
+		else
+			req->bit_mask[i] = 0xFFFFFFFF;
+	}
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_rx_vlan_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_vlan_strip_enable(struct bna_rxf *rxf)
+{
+	struct bfi_enet_enable_req *req = &rxf->bfi_enet_cmd.req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_RX_VLAN_STRIP_ENABLE_REQ, 0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_enable_req)));
+	req->enable = rxf->vlan_strip_status;
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_enable_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_rit_cfg(struct bna_rxf *rxf)
+{
+	struct bfi_enet_rit_req *req = &rxf->bfi_enet_cmd.rit_req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_RIT_CFG_REQ, 0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_rit_req)));
+	req->size = htons(rxf->rit_size);
+	memcpy(&req->table[0], rxf->rit, rxf->rit_size);
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_rit_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_rss_cfg(struct bna_rxf *rxf)
+{
+	struct bfi_enet_rss_cfg_req *req = &rxf->bfi_enet_cmd.rss_req;
+	int i;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_RSS_CFG_REQ, 0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_rss_cfg_req)));
+	req->cfg.type = rxf->rss_cfg.hash_type;
+	req->cfg.mask = rxf->rss_cfg.hash_mask;
+	for (i = 0; i < BFI_ENET_RSS_KEY_LEN; i++)
+		req->cfg.key[i] =
+			htonl(rxf->rss_cfg.toeplitz_hash_key[i]);
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_rss_cfg_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+static void
+bna_bfi_rss_enable(struct bna_rxf *rxf)
+{
+	struct bfi_enet_enable_req *req = &rxf->bfi_enet_cmd.req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_RSS_ENABLE_REQ, 0, rxf->rx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_enable_req)));
+	req->enable = rxf->rss_status;
+	bfa_msgq_cmd_set(&rxf->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_enable_req), &req->mh);
+	bfa_msgq_cmd_post(&rxf->rx->bna->msgq, &rxf->msgq_cmd);
+}
+
+/* This function gets the multicast MAC that has already been added to CAM */
+static struct bna_mac *
+bna_rxf_mcmac_get(struct bna_rxf *rxf, u8 *mac_addr)
+{
+	struct bna_mac *mac;
+	struct list_head *qe;
+
+	list_for_each(qe, &rxf->mcast_active_q) {
+		mac = (struct bna_mac *)qe;
+		if (BNA_MAC_IS_EQUAL(&mac->addr, mac_addr))
+			return mac;
+	}
+
+	list_for_each(qe, &rxf->mcast_pending_del_q) {
+		mac = (struct bna_mac *)qe;
+		if (BNA_MAC_IS_EQUAL(&mac->addr, mac_addr))
+			return mac;
+	}
+
+	return NULL;
+}
+
+static struct bna_mcam_handle *
+bna_rxf_mchandle_get(struct bna_rxf *rxf, int handle)
+{
+	struct bna_mcam_handle *mchandle;
+	struct list_head *qe;
+
+	list_for_each(qe, &rxf->mcast_handle_q) {
+		mchandle = (struct bna_mcam_handle *)qe;
+		if (mchandle->handle == handle)
+			return mchandle;
+	}
+
+	return NULL;
+}
+
+static void
+bna_rxf_mchandle_attach(struct bna_rxf *rxf, u8 *mac_addr, int handle)
+{
+	struct bna_mac *mcmac;
+	struct bna_mcam_handle *mchandle;
+
+	mcmac = bna_rxf_mcmac_get(rxf, mac_addr);
+	mchandle = bna_rxf_mchandle_get(rxf, handle);
+	if (mchandle == NULL) {
+		mchandle = bna_mcam_mod_handle_get(&rxf->rx->bna->mcam_mod);
+		mchandle->handle = handle;
+		mchandle->refcnt = 0;
+		list_add_tail(&mchandle->qe, &rxf->mcast_handle_q);
+	}
+	mchandle->refcnt++;
+	mcmac->handle = mchandle;
+}
+
+static int
+bna_rxf_mcast_del(struct bna_rxf *rxf, struct bna_mac *mac,
+		enum bna_cleanup_type cleanup)
+{
+	struct bna_mcam_handle *mchandle;
+	int ret = 0;
+
+	mchandle = mac->handle;
+	if (mchandle == NULL)
+		return ret;
+
+	mchandle->refcnt--;
+	if (mchandle->refcnt == 0) {
+		if (cleanup == BNA_HARD_CLEANUP) {
+			bna_bfi_mcast_del_req(rxf, mchandle->handle);
+			ret = 1;
+		}
+		list_del(&mchandle->qe);
+		bfa_q_qe_init(&mchandle->qe);
+		bna_mcam_mod_handle_put(&rxf->rx->bna->mcam_mod, mchandle);
+	}
+	mac->handle = NULL;
+
+	return ret;
+}
+
+static int
+bna_rxf_mcast_cfg_apply(struct bna_rxf *rxf)
+{
+	struct bna_mac *mac = NULL;
+	struct list_head *qe;
+	int ret;
+
+	/* Delete multicast entries previousely added */
+	while (!list_empty(&rxf->mcast_pending_del_q)) {
+		bfa_q_deq(&rxf->mcast_pending_del_q, &qe);
+		bfa_q_qe_init(qe);
+		mac = (struct bna_mac *)qe;
+		ret = bna_rxf_mcast_del(rxf, mac, BNA_HARD_CLEANUP);
+		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
+		if (ret)
+			return ret;
+	}
+
+	/* Add multicast entries */
+	if (!list_empty(&rxf->mcast_pending_add_q)) {
+		bfa_q_deq(&rxf->mcast_pending_add_q, &qe);
+		bfa_q_qe_init(qe);
+		mac = (struct bna_mac *)qe;
+		list_add_tail(&mac->qe, &rxf->mcast_active_q);
+		bna_bfi_mcast_add_req(rxf, mac);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_vlan_cfg_apply(struct bna_rxf *rxf)
+{
+	u8 vlan_pending_bitmask;
+	int block_idx = 0;
+
+	if (rxf->vlan_pending_bitmask) {
+		vlan_pending_bitmask = rxf->vlan_pending_bitmask;
+		while (!(vlan_pending_bitmask & 0x1)) {
+			block_idx++;
+			vlan_pending_bitmask >>= 1;
+		}
+		rxf->vlan_pending_bitmask &= ~(1 << block_idx);
+		bna_bfi_rx_vlan_filter_set(rxf, block_idx);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_mcast_cfg_reset(struct bna_rxf *rxf, enum bna_cleanup_type cleanup)
+{
+	struct list_head *qe;
+	struct bna_mac *mac;
+	int ret;
+
+	/* Throw away delete pending mcast entries */
+	while (!list_empty(&rxf->mcast_pending_del_q)) {
+		bfa_q_deq(&rxf->mcast_pending_del_q, &qe);
+		bfa_q_qe_init(qe);
+		mac = (struct bna_mac *)qe;
+		ret = bna_rxf_mcast_del(rxf, mac, cleanup);
+		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
+		if (ret)
+			return ret;
+	}
+
+	/* Move active mcast entries to pending_add_q */
+	while (!list_empty(&rxf->mcast_active_q)) {
+		bfa_q_deq(&rxf->mcast_active_q, &qe);
+		bfa_q_qe_init(qe);
+		list_add_tail(qe, &rxf->mcast_pending_add_q);
+		mac = (struct bna_mac *)qe;
+		if (bna_rxf_mcast_del(rxf, mac, cleanup))
+			return 1;
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_rss_cfg_apply(struct bna_rxf *rxf)
+{
+	if (rxf->rss_pending) {
+		if (rxf->rss_pending & BNA_RSS_F_RIT_PENDING) {
+			rxf->rss_pending &= ~BNA_RSS_F_RIT_PENDING;
+			bna_bfi_rit_cfg(rxf);
+			return 1;
+		}
+
+		if (rxf->rss_pending & BNA_RSS_F_CFG_PENDING) {
+			rxf->rss_pending &= ~BNA_RSS_F_CFG_PENDING;
+			bna_bfi_rss_cfg(rxf);
+			return 1;
+		}
+
+		if (rxf->rss_pending & BNA_RSS_F_STATUS_PENDING) {
+			rxf->rss_pending &= ~BNA_RSS_F_STATUS_PENDING;
+			bna_bfi_rss_enable(rxf);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_cfg_apply(struct bna_rxf *rxf)
+{
+	if (bna_rxf_ucast_cfg_apply(rxf))
+		return 1;
+
+	if (bna_rxf_mcast_cfg_apply(rxf))
+		return 1;
+
+	if (bna_rxf_promisc_cfg_apply(rxf))
+		return 1;
+
+	if (bna_rxf_allmulti_cfg_apply(rxf))
+		return 1;
+
+	if (bna_rxf_vlan_cfg_apply(rxf))
+		return 1;
+
+	if (bna_rxf_vlan_strip_cfg_apply(rxf))
+		return 1;
+
+	if (bna_rxf_rss_cfg_apply(rxf))
+		return 1;
+
+	return 0;
+}
+
+/* Only software reset */
+static int
+bna_rxf_fltr_clear(struct bna_rxf *rxf)
+{
+	if (bna_rxf_ucast_cfg_reset(rxf, BNA_HARD_CLEANUP))
+		return 1;
+
+	if (bna_rxf_mcast_cfg_reset(rxf, BNA_HARD_CLEANUP))
+		return 1;
+
+	if (bna_rxf_promisc_cfg_reset(rxf, BNA_HARD_CLEANUP))
+		return 1;
+
+	if (bna_rxf_allmulti_cfg_reset(rxf, BNA_HARD_CLEANUP))
+		return 1;
+
+	return 0;
+}
+
+static void
+bna_rxf_cfg_reset(struct bna_rxf *rxf)
+{
+	bna_rxf_ucast_cfg_reset(rxf, BNA_SOFT_CLEANUP);
+	bna_rxf_mcast_cfg_reset(rxf, BNA_SOFT_CLEANUP);
+	bna_rxf_promisc_cfg_reset(rxf, BNA_SOFT_CLEANUP);
+	bna_rxf_allmulti_cfg_reset(rxf, BNA_SOFT_CLEANUP);
+	bna_rxf_vlan_cfg_soft_reset(rxf);
+	bna_rxf_rss_cfg_soft_reset(rxf);
+}
+
+static void
+bna_rit_init(struct bna_rxf *rxf, int rit_size)
+{
+	struct bna_rx *rx = rxf->rx;
+	struct bna_rxp *rxp;
+	struct list_head *qe;
+	int offset = 0;
+
+	rxf->rit_size = rit_size;
+	list_for_each(qe, &rx->rxp_q) {
+		rxp = (struct bna_rxp *)qe;
+		rxf->rit[offset] = rxp->cq.ccb->id;
+		offset++;
+	}
+
+}
+
+void
+bna_bfi_rxf_cfg_rsp(struct bna_rxf *rxf, struct bfi_msgq_mhdr *msghdr)
+{
+	bfa_fsm_send_event(rxf, RXF_E_FW_RESP);
+}
+
+void
+bna_bfi_rxf_mcast_add_rsp(struct bna_rxf *rxf,
+			struct bfi_msgq_mhdr *msghdr)
+{
+	struct bfi_enet_mcast_add_req *req =
+		&rxf->bfi_enet_cmd.mcast_add_req;
+	struct bfi_enet_mcast_add_rsp *rsp =
+		(struct bfi_enet_mcast_add_rsp *)msghdr;
+
+	bna_rxf_mchandle_attach(rxf, (u8 *)&req->mac_addr,
+		ntohs(rsp->handle));
+	bfa_fsm_send_event(rxf, RXF_E_FW_RESP);
+}
+
+static void
+bna_rxf_init(struct bna_rxf *rxf,
+		struct bna_rx *rx,
+		struct bna_rx_config *q_config,
+		struct bna_res_info *res_info)
+{
+	rxf->rx = rx;
+
+	INIT_LIST_HEAD(&rxf->ucast_pending_add_q);
+	INIT_LIST_HEAD(&rxf->ucast_pending_del_q);
+	rxf->ucast_pending_set = 0;
+	rxf->ucast_active_set = 0;
+	INIT_LIST_HEAD(&rxf->ucast_active_q);
+	rxf->ucast_pending_mac = NULL;
+
+	INIT_LIST_HEAD(&rxf->mcast_pending_add_q);
+	INIT_LIST_HEAD(&rxf->mcast_pending_del_q);
+	INIT_LIST_HEAD(&rxf->mcast_active_q);
+	INIT_LIST_HEAD(&rxf->mcast_handle_q);
+
+	if (q_config->paused)
+		rxf->flags |= BNA_RXF_F_PAUSED;
+
+	rxf->rit = (u8 *)
+		res_info[BNA_RX_RES_MEM_T_RIT].res_u.mem_info.mdl[0].kva;
+	bna_rit_init(rxf, q_config->num_paths);
+
+	rxf->rss_status = q_config->rss_status;
+	if (rxf->rss_status == BNA_STATUS_T_ENABLED) {
+		rxf->rss_cfg = q_config->rss_config;
+		rxf->rss_pending |= BNA_RSS_F_CFG_PENDING;
+		rxf->rss_pending |= BNA_RSS_F_RIT_PENDING;
+		rxf->rss_pending |= BNA_RSS_F_STATUS_PENDING;
+	}
+
+	rxf->vlan_filter_status = BNA_STATUS_T_DISABLED;
+	memset(rxf->vlan_filter_table, 0,
+			(sizeof(u32) * (BFI_ENET_VLAN_ID_MAX / 32)));
+	rxf->vlan_filter_table[0] |= 1; /* for pure priority tagged frames */
+	rxf->vlan_pending_bitmask = (u8)BFI_VLAN_BMASK_ALL;
+
+	rxf->vlan_strip_status = q_config->vlan_strip_status;
+
+	bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
+}
+
+static void
+bna_rxf_uninit(struct bna_rxf *rxf)
+{
+	struct bna_mac *mac;
+
+	rxf->ucast_pending_set = 0;
+	rxf->ucast_active_set = 0;
+
+	while (!list_empty(&rxf->ucast_pending_add_q)) {
+		bfa_q_deq(&rxf->ucast_pending_add_q, &mac);
+		bfa_q_qe_init(&mac->qe);
+		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
+	}
+
+	if (rxf->ucast_pending_mac) {
+		bfa_q_qe_init(&rxf->ucast_pending_mac->qe);
+		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod,
+			rxf->ucast_pending_mac);
+		rxf->ucast_pending_mac = NULL;
+	}
+
+	while (!list_empty(&rxf->mcast_pending_add_q)) {
+		bfa_q_deq(&rxf->mcast_pending_add_q, &mac);
+		bfa_q_qe_init(&mac->qe);
+		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
+	}
+
+	rxf->rxmode_pending = 0;
+	rxf->rxmode_pending_bitmask = 0;
+	if (rxf->rx->bna->promisc_rid == rxf->rx->rid)
+		rxf->rx->bna->promisc_rid = BFI_INVALID_RID;
+	if (rxf->rx->bna->default_mode_rid == rxf->rx->rid)
+		rxf->rx->bna->default_mode_rid = BFI_INVALID_RID;
+
+	rxf->rss_pending = 0;
+	rxf->vlan_strip_pending = false;
+
+	rxf->flags = 0;
+
+	rxf->rx = NULL;
+}
+
+static void
+bna_rx_cb_rxf_started(struct bna_rx *rx)
+{
+	bfa_fsm_send_event(rx, RX_E_RXF_STARTED);
+}
+
+static void
+bna_rxf_start(struct bna_rxf *rxf)
+{
+	rxf->start_cbfn = bna_rx_cb_rxf_started;
+	rxf->start_cbarg = rxf->rx;
+	bfa_fsm_send_event(rxf, RXF_E_START);
+}
+
+static void
+bna_rx_cb_rxf_stopped(struct bna_rx *rx)
+{
+	bfa_fsm_send_event(rx, RX_E_RXF_STOPPED);
+}
+
+static void
+bna_rxf_stop(struct bna_rxf *rxf)
+{
+	rxf->stop_cbfn = bna_rx_cb_rxf_stopped;
+	rxf->stop_cbarg = rxf->rx;
+	bfa_fsm_send_event(rxf, RXF_E_STOP);
+}
+
+static void
+bna_rxf_fail(struct bna_rxf *rxf)
+{
+	bfa_fsm_send_event(rxf, RXF_E_FAIL);
+}
+
+enum bna_cb_status
+bna_rx_ucast_set(struct bna_rx *rx, u8 *ucmac,
+		 void (*cbfn)(struct bnad *, struct bna_rx *))
+{
+	struct bna_rxf *rxf = &rx->rxf;
+
+	if (rxf->ucast_pending_mac == NULL) {
+		rxf->ucast_pending_mac =
+				bna_ucam_mod_mac_get(&rxf->rx->bna->ucam_mod);
+		if (rxf->ucast_pending_mac == NULL)
+			return BNA_CB_UCAST_CAM_FULL;
+		bfa_q_qe_init(&rxf->ucast_pending_mac->qe);
+	}
+
+	memcpy(rxf->ucast_pending_mac->addr, ucmac, ETH_ALEN);
+	rxf->ucast_pending_set = 1;
+	rxf->cam_fltr_cbfn = cbfn;
+	rxf->cam_fltr_cbarg = rx->bna->bnad;
+
+	bfa_fsm_send_event(rxf, RXF_E_CONFIG);
+
+	return BNA_CB_SUCCESS;
+}
+
+enum bna_cb_status
+bna_rx_mcast_add(struct bna_rx *rx, u8 *addr,
+		 void (*cbfn)(struct bnad *, struct bna_rx *))
+{
+	struct bna_rxf *rxf = &rx->rxf;
+	struct bna_mac *mac;
+
+	/* Check if already added or pending addition */
+	if (bna_mac_find(&rxf->mcast_active_q, addr) ||
+		bna_mac_find(&rxf->mcast_pending_add_q, addr)) {
+		if (cbfn)
+			cbfn(rx->bna->bnad, rx);
+		return BNA_CB_SUCCESS;
+	}
+
+	mac = bna_mcam_mod_mac_get(&rxf->rx->bna->mcam_mod);
+	if (mac == NULL)
+		return BNA_CB_MCAST_LIST_FULL;
+	bfa_q_qe_init(&mac->qe);
+	memcpy(mac->addr, addr, ETH_ALEN);
+	list_add_tail(&mac->qe, &rxf->mcast_pending_add_q);
+
+	rxf->cam_fltr_cbfn = cbfn;
+	rxf->cam_fltr_cbarg = rx->bna->bnad;
+
+	bfa_fsm_send_event(rxf, RXF_E_CONFIG);
+
+	return BNA_CB_SUCCESS;
+}
+
+enum bna_cb_status
+bna_rx_mcast_listset(struct bna_rx *rx, int count, u8 *mclist,
+		     void (*cbfn)(struct bnad *, struct bna_rx *))
+{
+	struct bna_rxf *rxf = &rx->rxf;
+	struct list_head list_head;
+	struct list_head *qe;
+	u8 *mcaddr;
+	struct bna_mac *mac;
+	int i;
+
+	/* Allocate nodes */
+	INIT_LIST_HEAD(&list_head);
+	for (i = 0, mcaddr = mclist; i < count; i++) {
+		mac = bna_mcam_mod_mac_get(&rxf->rx->bna->mcam_mod);
+		if (mac == NULL)
+			goto err_return;
+		bfa_q_qe_init(&mac->qe);
+		memcpy(mac->addr, mcaddr, ETH_ALEN);
+		list_add_tail(&mac->qe, &list_head);
+
+		mcaddr += ETH_ALEN;
+	}
+
+	/* Purge the pending_add_q */
+	while (!list_empty(&rxf->mcast_pending_add_q)) {
+		bfa_q_deq(&rxf->mcast_pending_add_q, &qe);
+		bfa_q_qe_init(qe);
+		mac = (struct bna_mac *)qe;
+		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
+	}
+
+	/* Schedule active_q entries for deletion */
+	while (!list_empty(&rxf->mcast_active_q)) {
+		bfa_q_deq(&rxf->mcast_active_q, &qe);
+		mac = (struct bna_mac *)qe;
+		bfa_q_qe_init(&mac->qe);
+		list_add_tail(&mac->qe, &rxf->mcast_pending_del_q);
+	}
+
+	/* Add the new entries */
+	while (!list_empty(&list_head)) {
+		bfa_q_deq(&list_head, &qe);
+		mac = (struct bna_mac *)qe;
+		bfa_q_qe_init(&mac->qe);
+		list_add_tail(&mac->qe, &rxf->mcast_pending_add_q);
+	}
+
+	rxf->cam_fltr_cbfn = cbfn;
+	rxf->cam_fltr_cbarg = rx->bna->bnad;
+	bfa_fsm_send_event(rxf, RXF_E_CONFIG);
+
+	return BNA_CB_SUCCESS;
+
+err_return:
+	while (!list_empty(&list_head)) {
+		bfa_q_deq(&list_head, &qe);
+		mac = (struct bna_mac *)qe;
+		bfa_q_qe_init(&mac->qe);
+		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
+	}
+
+	return BNA_CB_MCAST_LIST_FULL;
+}
+
+void
+bna_rx_vlan_add(struct bna_rx *rx, int vlan_id)
+{
+	struct bna_rxf *rxf = &rx->rxf;
+	int index = (vlan_id >> BFI_VLAN_WORD_SHIFT);
+	int bit = (1 << (vlan_id & BFI_VLAN_WORD_MASK));
+	int group_id = (vlan_id >> BFI_VLAN_BLOCK_SHIFT);
+
+	rxf->vlan_filter_table[index] |= bit;
+	if (rxf->vlan_filter_status == BNA_STATUS_T_ENABLED) {
+		rxf->vlan_pending_bitmask |= (1 << group_id);
+		bfa_fsm_send_event(rxf, RXF_E_CONFIG);
+	}
+}
+
+void
+bna_rx_vlan_del(struct bna_rx *rx, int vlan_id)
+{
+	struct bna_rxf *rxf = &rx->rxf;
+	int index = (vlan_id >> BFI_VLAN_WORD_SHIFT);
+	int bit = (1 << (vlan_id & BFI_VLAN_WORD_MASK));
+	int group_id = (vlan_id >> BFI_VLAN_BLOCK_SHIFT);
+
+	rxf->vlan_filter_table[index] &= ~bit;
+	if (rxf->vlan_filter_status == BNA_STATUS_T_ENABLED) {
+		rxf->vlan_pending_bitmask |= (1 << group_id);
+		bfa_fsm_send_event(rxf, RXF_E_CONFIG);
+	}
+}
+
+static int
+bna_rxf_ucast_cfg_apply(struct bna_rxf *rxf)
+{
+	struct bna_mac *mac = NULL;
+	struct list_head *qe;
+
+	/* Delete MAC addresses previousely added */
+	if (!list_empty(&rxf->ucast_pending_del_q)) {
+		bfa_q_deq(&rxf->ucast_pending_del_q, &qe);
+		bfa_q_qe_init(qe);
+		mac = (struct bna_mac *)qe;
+		bna_bfi_ucast_req(rxf, mac, BFI_ENET_H2I_MAC_UCAST_DEL_REQ);
+		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
+		return 1;
+	}
+
+	/* Set default unicast MAC */
+	if (rxf->ucast_pending_set) {
+		rxf->ucast_pending_set = 0;
+		memcpy(rxf->ucast_active_mac.addr,
+			rxf->ucast_pending_mac->addr, ETH_ALEN);
+		rxf->ucast_active_set = 1;
+		bna_bfi_ucast_req(rxf, &rxf->ucast_active_mac,
+			BFI_ENET_H2I_MAC_UCAST_SET_REQ);
+		return 1;
+	}
+
+	/* Add additional MAC entries */
+	if (!list_empty(&rxf->ucast_pending_add_q)) {
+		bfa_q_deq(&rxf->ucast_pending_add_q, &qe);
+		bfa_q_qe_init(qe);
+		mac = (struct bna_mac *)qe;
+		list_add_tail(&mac->qe, &rxf->ucast_active_q);
+		bna_bfi_ucast_req(rxf, mac, BFI_ENET_H2I_MAC_UCAST_ADD_REQ);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_ucast_cfg_reset(struct bna_rxf *rxf, enum bna_cleanup_type cleanup)
+{
+	struct list_head *qe;
+	struct bna_mac *mac;
+
+	/* Throw away delete pending ucast entries */
+	while (!list_empty(&rxf->ucast_pending_del_q)) {
+		bfa_q_deq(&rxf->ucast_pending_del_q, &qe);
+		bfa_q_qe_init(qe);
+		mac = (struct bna_mac *)qe;
+		if (cleanup == BNA_SOFT_CLEANUP)
+			bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
+		else {
+			bna_bfi_ucast_req(rxf, mac,
+				BFI_ENET_H2I_MAC_UCAST_DEL_REQ);
+			bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
+			return 1;
+		}
+	}
+
+	/* Move active ucast entries to pending_add_q */
+	while (!list_empty(&rxf->ucast_active_q)) {
+		bfa_q_deq(&rxf->ucast_active_q, &qe);
+		bfa_q_qe_init(qe);
+		list_add_tail(qe, &rxf->ucast_pending_add_q);
+		if (cleanup == BNA_HARD_CLEANUP) {
+			mac = (struct bna_mac *)qe;
+			bna_bfi_ucast_req(rxf, mac,
+				BFI_ENET_H2I_MAC_UCAST_DEL_REQ);
+			return 1;
+		}
+	}
+
+	if (rxf->ucast_active_set) {
+		rxf->ucast_pending_set = 1;
+		rxf->ucast_active_set = 0;
+		if (cleanup == BNA_HARD_CLEANUP) {
+			bna_bfi_ucast_req(rxf, &rxf->ucast_active_mac,
+				BFI_ENET_H2I_MAC_UCAST_CLR_REQ);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_promisc_cfg_apply(struct bna_rxf *rxf)
+{
+	struct bna *bna = rxf->rx->bna;
+
+	/* Enable/disable promiscuous mode */
+	if (is_promisc_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask)) {
+		/* move promisc configuration from pending -> active */
+		promisc_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		rxf->rxmode_active |= BNA_RXMODE_PROMISC;
+		bna_bfi_rx_promisc_req(rxf, BNA_STATUS_T_ENABLED);
+		return 1;
+	} else if (is_promisc_disable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask)) {
+		/* move promisc configuration from pending -> active */
+		promisc_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
+		bna->promisc_rid = BFI_INVALID_RID;
+		bna_bfi_rx_promisc_req(rxf, BNA_STATUS_T_DISABLED);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_promisc_cfg_reset(struct bna_rxf *rxf, enum bna_cleanup_type cleanup)
+{
+	struct bna *bna = rxf->rx->bna;
+
+	/* Clear pending promisc mode disable */
+	if (is_promisc_disable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask)) {
+		promisc_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
+		bna->promisc_rid = BFI_INVALID_RID;
+		if (cleanup == BNA_HARD_CLEANUP) {
+			bna_bfi_rx_promisc_req(rxf, BNA_STATUS_T_DISABLED);
+			return 1;
+		}
+	}
+
+	/* Move promisc mode config from active -> pending */
+	if (rxf->rxmode_active & BNA_RXMODE_PROMISC) {
+		promisc_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
+		if (cleanup == BNA_HARD_CLEANUP) {
+			bna_bfi_rx_promisc_req(rxf, BNA_STATUS_T_DISABLED);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_allmulti_cfg_apply(struct bna_rxf *rxf)
+{
+	/* Enable/disable allmulti mode */
+	if (is_allmulti_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask)) {
+		/* move allmulti configuration from pending -> active */
+		allmulti_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		rxf->rxmode_active |= BNA_RXMODE_ALLMULTI;
+		bna_bfi_mcast_filter_req(rxf, BNA_STATUS_T_DISABLED);
+		return 1;
+	} else if (is_allmulti_disable(rxf->rxmode_pending,
+					rxf->rxmode_pending_bitmask)) {
+		/* move allmulti configuration from pending -> active */
+		allmulti_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
+		bna_bfi_mcast_filter_req(rxf, BNA_STATUS_T_ENABLED);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_allmulti_cfg_reset(struct bna_rxf *rxf, enum bna_cleanup_type cleanup)
+{
+	/* Clear pending allmulti mode disable */
+	if (is_allmulti_disable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask)) {
+		allmulti_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
+		if (cleanup == BNA_HARD_CLEANUP) {
+			bna_bfi_mcast_filter_req(rxf, BNA_STATUS_T_ENABLED);
+			return 1;
+		}
+	}
+
+	/* Move allmulti mode config from active -> pending */
+	if (rxf->rxmode_active & BNA_RXMODE_ALLMULTI) {
+		allmulti_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
+		if (cleanup == BNA_HARD_CLEANUP) {
+			bna_bfi_mcast_filter_req(rxf, BNA_STATUS_T_ENABLED);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int
+bna_rxf_promisc_enable(struct bna_rxf *rxf)
+{
+	struct bna *bna = rxf->rx->bna;
+	int ret = 0;
+
+	if (is_promisc_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask) ||
+		(rxf->rxmode_active & BNA_RXMODE_PROMISC)) {
+		/* Do nothing if pending enable or already enabled */
+	} else if (is_promisc_disable(rxf->rxmode_pending,
+					rxf->rxmode_pending_bitmask)) {
+		/* Turn off pending disable command */
+		promisc_inactive(rxf->rxmode_pending,
+			rxf->rxmode_pending_bitmask);
+	} else {
+		/* Schedule enable */
+		promisc_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		bna->promisc_rid = rxf->rx->rid;
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static int
+bna_rxf_promisc_disable(struct bna_rxf *rxf)
+{
+	struct bna *bna = rxf->rx->bna;
+	int ret = 0;
+
+	if (is_promisc_disable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask) ||
+		(!(rxf->rxmode_active & BNA_RXMODE_PROMISC))) {
+		/* Do nothing if pending disable or already disabled */
+	} else if (is_promisc_enable(rxf->rxmode_pending,
+					rxf->rxmode_pending_bitmask)) {
+		/* Turn off pending enable command */
+		promisc_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		bna->promisc_rid = BFI_INVALID_RID;
+	} else if (rxf->rxmode_active & BNA_RXMODE_PROMISC) {
+		/* Schedule disable */
+		promisc_disable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static int
+bna_rxf_allmulti_enable(struct bna_rxf *rxf)
+{
+	int ret = 0;
+
+	if (is_allmulti_enable(rxf->rxmode_pending,
+			rxf->rxmode_pending_bitmask) ||
+			(rxf->rxmode_active & BNA_RXMODE_ALLMULTI)) {
+		/* Do nothing if pending enable or already enabled */
+	} else if (is_allmulti_disable(rxf->rxmode_pending,
+					rxf->rxmode_pending_bitmask)) {
+		/* Turn off pending disable command */
+		allmulti_inactive(rxf->rxmode_pending,
+			rxf->rxmode_pending_bitmask);
+	} else {
+		/* Schedule enable */
+		allmulti_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static int
+bna_rxf_allmulti_disable(struct bna_rxf *rxf)
+{
+	int ret = 0;
+
+	if (is_allmulti_disable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask) ||
+		(!(rxf->rxmode_active & BNA_RXMODE_ALLMULTI))) {
+		/* Do nothing if pending disable or already disabled */
+	} else if (is_allmulti_enable(rxf->rxmode_pending,
+					rxf->rxmode_pending_bitmask)) {
+		/* Turn off pending enable command */
+		allmulti_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+	} else if (rxf->rxmode_active & BNA_RXMODE_ALLMULTI) {
+		/* Schedule disable */
+		allmulti_disable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static int
+bna_rxf_vlan_strip_cfg_apply(struct bna_rxf *rxf)
+{
+	if (rxf->vlan_strip_pending) {
+			rxf->vlan_strip_pending = false;
+			bna_bfi_vlan_strip_enable(rxf);
+			return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * RX
+ */
+
+#define	BNA_GET_RXQS(qcfg)	(((qcfg)->rxp_type == BNA_RXP_SINGLE) ?	\
+	(qcfg)->num_paths : ((qcfg)->num_paths * 2))
+
+#define	SIZE_TO_PAGES(size)	(((size) >> PAGE_SHIFT) + ((((size) &\
+	(PAGE_SIZE - 1)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT))
+
+#define	call_rx_stop_cbfn(rx)						\
+do {								    \
+	if ((rx)->stop_cbfn) {						\
+		void (*cbfn)(void *, struct bna_rx *);	  \
+		void *cbarg;					    \
+		cbfn = (rx)->stop_cbfn;				 \
+		cbarg = (rx)->stop_cbarg;			       \
+		(rx)->stop_cbfn = NULL;					\
+		(rx)->stop_cbarg = NULL;				\
+		cbfn(cbarg, rx);					\
+	}							       \
+} while (0)
+
+#define bfi_enet_datapath_q_init(bfi_q, bna_qpt)			\
+do {									\
+	struct bna_dma_addr cur_q_addr =				\
+		*((struct bna_dma_addr *)((bna_qpt)->kv_qpt_ptr));	\
+	(bfi_q)->pg_tbl.a32.addr_lo = (bna_qpt)->hw_qpt_ptr.lsb;	\
+	(bfi_q)->pg_tbl.a32.addr_hi = (bna_qpt)->hw_qpt_ptr.msb;	\
+	(bfi_q)->first_entry.a32.addr_lo = cur_q_addr.lsb;		\
+	(bfi_q)->first_entry.a32.addr_hi = cur_q_addr.msb;		\
+	(bfi_q)->pages = htons((u16)(bna_qpt)->page_count);	\
+	(bfi_q)->page_sz = htons((u16)(bna_qpt)->page_size);\
+} while (0)
+
+static void bna_bfi_rx_enet_start(struct bna_rx *rx);
+static void bna_rx_enet_stop(struct bna_rx *rx);
+static void bna_rx_mod_cb_rx_stopped(void *arg, struct bna_rx *rx);
+
+bfa_fsm_state_decl(bna_rx, stopped,
+	struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, start_wait,
+	struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, rxf_start_wait,
+	struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, started,
+	struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, rxf_stop_wait,
+	struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, stop_wait,
+	struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, cleanup_wait,
+	struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, failed,
+	struct bna_rx, enum bna_rx_event);
+bfa_fsm_state_decl(bna_rx, quiesce_wait,
+	struct bna_rx, enum bna_rx_event);
+
+static void bna_rx_sm_stopped_entry(struct bna_rx *rx)
+{
+	call_rx_stop_cbfn(rx);
+}
+
+static void bna_rx_sm_stopped(struct bna_rx *rx,
+				enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_START:
+		bfa_fsm_set_state(rx, bna_rx_sm_start_wait);
+		break;
+
+	case RX_E_STOP:
+		call_rx_stop_cbfn(rx);
+		break;
+
+	case RX_E_FAIL:
+		/* no-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+	}
+}
+
+static void bna_rx_sm_start_wait_entry(struct bna_rx *rx)
+{
+	bna_bfi_rx_enet_start(rx);
+}
+
+void
+bna_rx_sm_stop_wait_entry(struct bna_rx *rx)
+{
+}
+
+static void
+bna_rx_sm_stop_wait(struct bna_rx *rx, enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_FAIL:
+	case RX_E_STOPPED:
+		bfa_fsm_set_state(rx, bna_rx_sm_cleanup_wait);
+		rx->rx_cleanup_cbfn(rx->bna->bnad, rx);
+		break;
+
+	case RX_E_STARTED:
+		bna_rx_enet_stop(rx);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+	}
+}
+
+static void bna_rx_sm_start_wait(struct bna_rx *rx,
+				enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_STOP:
+		bfa_fsm_set_state(rx, bna_rx_sm_stop_wait);
+		break;
+
+	case RX_E_FAIL:
+		bfa_fsm_set_state(rx, bna_rx_sm_stopped);
+		break;
+
+	case RX_E_STARTED:
+		bfa_fsm_set_state(rx, bna_rx_sm_rxf_start_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+	}
+}
+
+static void bna_rx_sm_rxf_start_wait_entry(struct bna_rx *rx)
+{
+	rx->rx_post_cbfn(rx->bna->bnad, rx);
+	bna_rxf_start(&rx->rxf);
+}
+
+void
+bna_rx_sm_rxf_stop_wait_entry(struct bna_rx *rx)
+{
+}
+
+static void
+bna_rx_sm_rxf_stop_wait(struct bna_rx *rx, enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_FAIL:
+		bfa_fsm_set_state(rx, bna_rx_sm_cleanup_wait);
+		bna_rxf_fail(&rx->rxf);
+		rx->rx_cleanup_cbfn(rx->bna->bnad, rx);
+		break;
+
+	case RX_E_RXF_STARTED:
+		bna_rxf_stop(&rx->rxf);
+		break;
+
+	case RX_E_RXF_STOPPED:
+		bfa_fsm_set_state(rx, bna_rx_sm_stop_wait);
+		bna_rx_enet_stop(rx);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+	}
+
+}
+
+void
+bna_rx_sm_started_entry(struct bna_rx *rx)
+{
+	struct bna_rxp *rxp;
+	struct list_head *qe_rxp;
+	int is_regular = (rx->type == BNA_RX_T_REGULAR);
+
+	/* Start IB */
+	list_for_each(qe_rxp, &rx->rxp_q) {
+		rxp = (struct bna_rxp *)qe_rxp;
+		bna_ib_start(rx->bna, &rxp->cq.ib, is_regular);
+	}
+
+	bna_ethport_cb_rx_started(&rx->bna->ethport);
+}
+
+static void
+bna_rx_sm_started(struct bna_rx *rx, enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_STOP:
+		bfa_fsm_set_state(rx, bna_rx_sm_rxf_stop_wait);
+		bna_ethport_cb_rx_stopped(&rx->bna->ethport);
+		bna_rxf_stop(&rx->rxf);
+		break;
+
+	case RX_E_FAIL:
+		bfa_fsm_set_state(rx, bna_rx_sm_failed);
+		bna_ethport_cb_rx_stopped(&rx->bna->ethport);
+		bna_rxf_fail(&rx->rxf);
+		rx->rx_cleanup_cbfn(rx->bna->bnad, rx);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+	}
+}
+
+static void bna_rx_sm_rxf_start_wait(struct bna_rx *rx,
+				enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_STOP:
+		bfa_fsm_set_state(rx, bna_rx_sm_rxf_stop_wait);
+		break;
+
+	case RX_E_FAIL:
+		bfa_fsm_set_state(rx, bna_rx_sm_failed);
+		bna_rxf_fail(&rx->rxf);
+		rx->rx_cleanup_cbfn(rx->bna->bnad, rx);
+		break;
+
+	case RX_E_RXF_STARTED:
+		bfa_fsm_set_state(rx, bna_rx_sm_started);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+	}
+}
+
+void
+bna_rx_sm_cleanup_wait_entry(struct bna_rx *rx)
+{
+}
+
+void
+bna_rx_sm_cleanup_wait(struct bna_rx *rx, enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_FAIL:
+	case RX_E_RXF_STOPPED:
+		/* No-op */
+		break;
+
+	case RX_E_CLEANUP_DONE:
+		bfa_fsm_set_state(rx, bna_rx_sm_stopped);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+	}
+}
+
+static void
+bna_rx_sm_failed_entry(struct bna_rx *rx)
+{
+}
+
+static void
+bna_rx_sm_failed(struct bna_rx *rx, enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_START:
+		bfa_fsm_set_state(rx, bna_rx_sm_quiesce_wait);
+		break;
+
+	case RX_E_STOP:
+		bfa_fsm_set_state(rx, bna_rx_sm_cleanup_wait);
+		break;
+
+	case RX_E_FAIL:
+	case RX_E_RXF_STARTED:
+	case RX_E_RXF_STOPPED:
+		/* No-op */
+		break;
+
+	case RX_E_CLEANUP_DONE:
+		bfa_fsm_set_state(rx, bna_rx_sm_stopped);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+}	}
+
+static void
+bna_rx_sm_quiesce_wait_entry(struct bna_rx *rx)
+{
+}
+
+static void
+bna_rx_sm_quiesce_wait(struct bna_rx *rx, enum bna_rx_event event)
+{
+	switch (event) {
+	case RX_E_STOP:
+		bfa_fsm_set_state(rx, bna_rx_sm_cleanup_wait);
+		break;
+
+	case RX_E_FAIL:
+		bfa_fsm_set_state(rx, bna_rx_sm_failed);
+		break;
+
+	case RX_E_CLEANUP_DONE:
+		bfa_fsm_set_state(rx, bna_rx_sm_start_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+		break;
+	}
+}
+
+static void
+bna_bfi_rx_enet_start(struct bna_rx *rx)
+{
+	struct bfi_enet_rx_cfg_req *cfg_req = &rx->bfi_enet_cmd.cfg_req;
+	struct bna_rxp *rxp = NULL;
+	struct bna_rxq *q0 = NULL, *q1 = NULL;
+	struct list_head *rxp_qe;
+	int i;
+
+	bfi_msgq_mhdr_set(cfg_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_RX_CFG_SET_REQ, 0, rx->rid);
+	cfg_req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_rx_cfg_req)));
+
+	cfg_req->num_queue_sets = rx->num_paths;
+	for (i = 0, rxp_qe = bfa_q_first(&rx->rxp_q);
+		i < rx->num_paths;
+		i++, rxp_qe = bfa_q_next(rxp_qe)) {
+		rxp = (struct bna_rxp *)rxp_qe;
+
+		GET_RXQS(rxp, q0, q1);
+		switch (rxp->type) {
+		case BNA_RXP_SLR:
+		case BNA_RXP_HDS:
+			/* Small RxQ */
+			bfi_enet_datapath_q_init(&cfg_req->q_cfg[i].qs.q,
+						&q1->qpt);
+			cfg_req->q_cfg[i].qs.rx_buffer_size =
+				htons((u16)q1->buffer_size);
+			/* Fall through */
+
+		case BNA_RXP_SINGLE:
+			/* Large/Single RxQ */
+			bfi_enet_datapath_q_init(&cfg_req->q_cfg[i].ql.q,
+						&q0->qpt);
+			q0->buffer_size =
+				bna_enet_mtu_get(&rx->bna->enet);
+			cfg_req->q_cfg[i].ql.rx_buffer_size =
+				htons((u16)q0->buffer_size);
+			break;
+
+		default:
+			BUG_ON(1);
+		}
+
+		bfi_enet_datapath_q_init(&cfg_req->q_cfg[i].cq.q,
+					&rxp->cq.qpt);
+
+		cfg_req->q_cfg[i].ib.index_addr.a32.addr_lo =
+			rxp->cq.ib.ib_seg_host_addr.lsb;
+		cfg_req->q_cfg[i].ib.index_addr.a32.addr_hi =
+			rxp->cq.ib.ib_seg_host_addr.msb;
+		cfg_req->q_cfg[i].ib.intr.msix_index =
+			htons((u16)rxp->cq.ib.intr_vector);
+	}
+
+	cfg_req->ib_cfg.int_pkt_dma = BNA_STATUS_T_DISABLED;
+	cfg_req->ib_cfg.int_enabled = BNA_STATUS_T_ENABLED;
+	cfg_req->ib_cfg.int_pkt_enabled = BNA_STATUS_T_DISABLED;
+	cfg_req->ib_cfg.continuous_coalescing = BNA_STATUS_T_DISABLED;
+	cfg_req->ib_cfg.msix = (rxp->cq.ib.intr_type == BNA_INTR_T_MSIX)
+				? BNA_STATUS_T_ENABLED :
+				BNA_STATUS_T_DISABLED;
+	cfg_req->ib_cfg.coalescing_timeout =
+			htonl((u32)rxp->cq.ib.coalescing_timeo);
+	cfg_req->ib_cfg.inter_pkt_timeout =
+			htonl((u32)rxp->cq.ib.interpkt_timeo);
+	cfg_req->ib_cfg.inter_pkt_count = (u8)rxp->cq.ib.interpkt_count;
+
+	switch (rxp->type) {
+	case BNA_RXP_SLR:
+		cfg_req->rx_cfg.rxq_type = BFI_ENET_RXQ_LARGE_SMALL;
+		break;
+
+	case BNA_RXP_HDS:
+		cfg_req->rx_cfg.rxq_type = BFI_ENET_RXQ_HDS;
+		cfg_req->rx_cfg.hds.type = rx->hds_cfg.hdr_type;
+		cfg_req->rx_cfg.hds.force_offset = rx->hds_cfg.forced_offset;
+		cfg_req->rx_cfg.hds.max_header_size = rx->hds_cfg.forced_offset;
+		break;
+
+	case BNA_RXP_SINGLE:
+		cfg_req->rx_cfg.rxq_type = BFI_ENET_RXQ_SINGLE;
+		break;
+
+	default:
+		BUG_ON(1);
+	}
+	cfg_req->rx_cfg.strip_vlan = rx->rxf.vlan_strip_status;
+
+	bfa_msgq_cmd_set(&rx->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_rx_cfg_req), &cfg_req->mh);
+	bfa_msgq_cmd_post(&rx->bna->msgq, &rx->msgq_cmd);
+}
+
+static void
+bna_bfi_rx_enet_stop(struct bna_rx *rx)
+{
+	struct bfi_enet_req *req = &rx->bfi_enet_cmd.req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_RX_CFG_CLR_REQ, 0, rx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_req)));
+	bfa_msgq_cmd_set(&rx->msgq_cmd, NULL, NULL, sizeof(struct bfi_enet_req),
+		&req->mh);
+	bfa_msgq_cmd_post(&rx->bna->msgq, &rx->msgq_cmd);
+}
+
+static void
+bna_rx_enet_stop(struct bna_rx *rx)
+{
+	struct bna_rxp *rxp;
+	struct list_head		 *qe_rxp;
+
+	/* Stop IB */
+	list_for_each(qe_rxp, &rx->rxp_q) {
+		rxp = (struct bna_rxp *)qe_rxp;
+		bna_ib_stop(rx->bna, &rxp->cq.ib);
+	}
+
+	bna_bfi_rx_enet_stop(rx);
+}
+
+static int
+bna_rx_res_check(struct bna_rx_mod *rx_mod, struct bna_rx_config *rx_cfg)
+{
+	if ((rx_mod->rx_free_count == 0) ||
+		(rx_mod->rxp_free_count == 0) ||
+		(rx_mod->rxq_free_count == 0))
+		return 0;
+
+	if (rx_cfg->rxp_type == BNA_RXP_SINGLE) {
+		if ((rx_mod->rxp_free_count < rx_cfg->num_paths) ||
+			(rx_mod->rxq_free_count < rx_cfg->num_paths))
+				return 0;
+	} else {
+		if ((rx_mod->rxp_free_count < rx_cfg->num_paths) ||
+			(rx_mod->rxq_free_count < (2 * rx_cfg->num_paths)))
+			return 0;
+	}
+
+	return 1;
+}
+
+static struct bna_rxq *
+bna_rxq_get(struct bna_rx_mod *rx_mod)
+{
+	struct bna_rxq *rxq = NULL;
+	struct list_head	*qe = NULL;
+
+	bfa_q_deq(&rx_mod->rxq_free_q, &qe);
+	rx_mod->rxq_free_count--;
+	rxq = (struct bna_rxq *)qe;
+	bfa_q_qe_init(&rxq->qe);
+
+	return rxq;
+}
+
+static void
+bna_rxq_put(struct bna_rx_mod *rx_mod, struct bna_rxq *rxq)
+{
+	bfa_q_qe_init(&rxq->qe);
+	list_add_tail(&rxq->qe, &rx_mod->rxq_free_q);
+	rx_mod->rxq_free_count++;
+}
+
+static struct bna_rxp *
+bna_rxp_get(struct bna_rx_mod *rx_mod)
+{
+	struct list_head	*qe = NULL;
+	struct bna_rxp *rxp = NULL;
+
+	bfa_q_deq(&rx_mod->rxp_free_q, &qe);
+	rx_mod->rxp_free_count--;
+	rxp = (struct bna_rxp *)qe;
+	bfa_q_qe_init(&rxp->qe);
+
+	return rxp;
+}
+
+static void
+bna_rxp_put(struct bna_rx_mod *rx_mod, struct bna_rxp *rxp)
+{
+	bfa_q_qe_init(&rxp->qe);
+	list_add_tail(&rxp->qe, &rx_mod->rxp_free_q);
+	rx_mod->rxp_free_count++;
+}
+
+static struct bna_rx *
+bna_rx_get(struct bna_rx_mod *rx_mod, enum bna_rx_type type)
+{
+	struct list_head	*qe = NULL;
+	struct bna_rx *rx = NULL;
+
+	if (type == BNA_RX_T_REGULAR) {
+		bfa_q_deq(&rx_mod->rx_free_q, &qe);
+	} else
+		bfa_q_deq_tail(&rx_mod->rx_free_q, &qe);
+
+	rx_mod->rx_free_count--;
+	rx = (struct bna_rx *)qe;
+	bfa_q_qe_init(&rx->qe);
+	list_add_tail(&rx->qe, &rx_mod->rx_active_q);
+	rx->type = type;
+
+	return rx;
+}
+
+static void
+bna_rx_put(struct bna_rx_mod *rx_mod, struct bna_rx *rx)
+{
+	struct list_head *prev_qe = NULL;
+	struct list_head *qe;
+
+	bfa_q_qe_init(&rx->qe);
+
+	list_for_each(qe, &rx_mod->rx_free_q) {
+		if (((struct bna_rx *)qe)->rid < rx->rid)
+			prev_qe = qe;
+		else
+			break;
+	}
+
+	if (prev_qe == NULL) {
+		/* This is the first entry */
+		bfa_q_enq_head(&rx_mod->rx_free_q, &rx->qe);
+	} else if (bfa_q_next(prev_qe) == &rx_mod->rx_free_q) {
+		/* This is the last entry */
+		list_add_tail(&rx->qe, &rx_mod->rx_free_q);
+	} else {
+		/* Somewhere in the middle */
+		bfa_q_next(&rx->qe) = bfa_q_next(prev_qe);
+		bfa_q_prev(&rx->qe) = prev_qe;
+		bfa_q_next(prev_qe) = &rx->qe;
+		bfa_q_prev(bfa_q_next(&rx->qe)) = &rx->qe;
+	}
+
+	rx_mod->rx_free_count++;
+}
+
+static void
+bna_rxp_add_rxqs(struct bna_rxp *rxp, struct bna_rxq *q0,
+		struct bna_rxq *q1)
+{
+	switch (rxp->type) {
+	case BNA_RXP_SINGLE:
+		rxp->rxq.single.only = q0;
+		rxp->rxq.single.reserved = NULL;
+		break;
+	case BNA_RXP_SLR:
+		rxp->rxq.slr.large = q0;
+		rxp->rxq.slr.small = q1;
+		break;
+	case BNA_RXP_HDS:
+		rxp->rxq.hds.data = q0;
+		rxp->rxq.hds.hdr = q1;
+		break;
+	default:
+		break;
+	}
+}
+
+static void
+bna_rxq_qpt_setup(struct bna_rxq *rxq,
+		struct bna_rxp *rxp,
+		u32 page_count,
+		u32 page_size,
+		struct bna_mem_descr *qpt_mem,
+		struct bna_mem_descr *swqpt_mem,
+		struct bna_mem_descr *page_mem)
+{
+	int	i;
+
+	rxq->qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
+	rxq->qpt.hw_qpt_ptr.msb = qpt_mem->dma.msb;
+	rxq->qpt.kv_qpt_ptr = qpt_mem->kva;
+	rxq->qpt.page_count = page_count;
+	rxq->qpt.page_size = page_size;
+
+	rxq->rcb->sw_qpt = (void **) swqpt_mem->kva;
+
+	for (i = 0; i < rxq->qpt.page_count; i++) {
+		rxq->rcb->sw_qpt[i] = page_mem[i].kva;
+		((struct bna_dma_addr *)rxq->qpt.kv_qpt_ptr)[i].lsb =
+			page_mem[i].dma.lsb;
+		((struct bna_dma_addr *)rxq->qpt.kv_qpt_ptr)[i].msb =
+			page_mem[i].dma.msb;
+	}
+}
+
+static void
+bna_rxp_cqpt_setup(struct bna_rxp *rxp,
+		u32 page_count,
+		u32 page_size,
+		struct bna_mem_descr *qpt_mem,
+		struct bna_mem_descr *swqpt_mem,
+		struct bna_mem_descr *page_mem)
+{
+	int	i;
+
+	rxp->cq.qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
+	rxp->cq.qpt.hw_qpt_ptr.msb = qpt_mem->dma.msb;
+	rxp->cq.qpt.kv_qpt_ptr = qpt_mem->kva;
+	rxp->cq.qpt.page_count = page_count;
+	rxp->cq.qpt.page_size = page_size;
+
+	rxp->cq.ccb->sw_qpt = (void **) swqpt_mem->kva;
+
+	for (i = 0; i < rxp->cq.qpt.page_count; i++) {
+		rxp->cq.ccb->sw_qpt[i] = page_mem[i].kva;
+
+		((struct bna_dma_addr *)rxp->cq.qpt.kv_qpt_ptr)[i].lsb =
+			page_mem[i].dma.lsb;
+		((struct bna_dma_addr *)rxp->cq.qpt.kv_qpt_ptr)[i].msb =
+			page_mem[i].dma.msb;
+	}
+}
+
+static void
+bna_rx_mod_cb_rx_stopped(void *arg, struct bna_rx *rx)
+{
+	struct bna_rx_mod *rx_mod = (struct bna_rx_mod *)arg;
+
+	bfa_wc_down(&rx_mod->rx_stop_wc);
+}
+
+static void
+bna_rx_mod_cb_rx_stopped_all(void *arg)
+{
+	struct bna_rx_mod *rx_mod = (struct bna_rx_mod *)arg;
+
+	if (rx_mod->stop_cbfn)
+		rx_mod->stop_cbfn(&rx_mod->bna->enet);
+	rx_mod->stop_cbfn = NULL;
+}
+
+static void
+bna_rx_start(struct bna_rx *rx)
+{
+	rx->rx_flags |= BNA_RX_F_ENET_STARTED;
+	if (rx->rx_flags & BNA_RX_F_ENABLED)
+		bfa_fsm_send_event(rx, RX_E_START);
+}
+
+static void
+bna_rx_stop(struct bna_rx *rx)
+{
+	rx->rx_flags &= ~BNA_RX_F_ENET_STARTED;
+	if (rx->fsm == (bfa_fsm_t) bna_rx_sm_stopped)
+		bna_rx_mod_cb_rx_stopped(&rx->bna->rx_mod, rx);
+	else {
+		rx->stop_cbfn = bna_rx_mod_cb_rx_stopped;
+		rx->stop_cbarg = &rx->bna->rx_mod;
+		bfa_fsm_send_event(rx, RX_E_STOP);
+	}
+}
+
+static void
+bna_rx_fail(struct bna_rx *rx)
+{
+	/* Indicate Enet is not enabled, and failed */
+	rx->rx_flags &= ~BNA_RX_F_ENET_STARTED;
+	bfa_fsm_send_event(rx, RX_E_FAIL);
+}
+
+void
+bna_rx_mod_start(struct bna_rx_mod *rx_mod, enum bna_rx_type type)
+{
+	struct bna_rx *rx;
+	struct list_head *qe;
+
+	rx_mod->flags |= BNA_RX_MOD_F_ENET_STARTED;
+	if (type == BNA_RX_T_LOOPBACK)
+		rx_mod->flags |= BNA_RX_MOD_F_ENET_LOOPBACK;
+
+	list_for_each(qe, &rx_mod->rx_active_q) {
+		rx = (struct bna_rx *)qe;
+		if (rx->type == type)
+			bna_rx_start(rx);
+	}
+}
+
+void
+bna_rx_mod_stop(struct bna_rx_mod *rx_mod, enum bna_rx_type type)
+{
+	struct bna_rx *rx;
+	struct list_head *qe;
+
+	rx_mod->flags &= ~BNA_RX_MOD_F_ENET_STARTED;
+	rx_mod->flags &= ~BNA_RX_MOD_F_ENET_LOOPBACK;
+
+	rx_mod->stop_cbfn = bna_enet_cb_rx_stopped;
+
+	bfa_wc_init(&rx_mod->rx_stop_wc, bna_rx_mod_cb_rx_stopped_all, rx_mod);
+
+	list_for_each(qe, &rx_mod->rx_active_q) {
+		rx = (struct bna_rx *)qe;
+		if (rx->type == type) {
+			bfa_wc_up(&rx_mod->rx_stop_wc);
+			bna_rx_stop(rx);
+		}
+	}
+
+	bfa_wc_wait(&rx_mod->rx_stop_wc);
+}
+
+void
+bna_rx_mod_fail(struct bna_rx_mod *rx_mod)
+{
+	struct bna_rx *rx;
+	struct list_head *qe;
+
+	rx_mod->flags &= ~BNA_RX_MOD_F_ENET_STARTED;
+	rx_mod->flags &= ~BNA_RX_MOD_F_ENET_LOOPBACK;
+
+	list_for_each(qe, &rx_mod->rx_active_q) {
+		rx = (struct bna_rx *)qe;
+		bna_rx_fail(rx);
+	}
+}
+
+void bna_rx_mod_init(struct bna_rx_mod *rx_mod, struct bna *bna,
+			struct bna_res_info *res_info)
+{
+	int	index;
+	struct bna_rx *rx_ptr;
+	struct bna_rxp *rxp_ptr;
+	struct bna_rxq *rxq_ptr;
+
+	rx_mod->bna = bna;
+	rx_mod->flags = 0;
+
+	rx_mod->rx = (struct bna_rx *)
+		res_info[BNA_MOD_RES_MEM_T_RX_ARRAY].res_u.mem_info.mdl[0].kva;
+	rx_mod->rxp = (struct bna_rxp *)
+		res_info[BNA_MOD_RES_MEM_T_RXP_ARRAY].res_u.mem_info.mdl[0].kva;
+	rx_mod->rxq = (struct bna_rxq *)
+		res_info[BNA_MOD_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.mdl[0].kva;
+
+	/* Initialize the queues */
+	INIT_LIST_HEAD(&rx_mod->rx_free_q);
+	rx_mod->rx_free_count = 0;
+	INIT_LIST_HEAD(&rx_mod->rxq_free_q);
+	rx_mod->rxq_free_count = 0;
+	INIT_LIST_HEAD(&rx_mod->rxp_free_q);
+	rx_mod->rxp_free_count = 0;
+	INIT_LIST_HEAD(&rx_mod->rx_active_q);
+
+	/* Build RX queues */
+	for (index = 0; index < bna->ioceth.attr.num_rxp; index++) {
+		rx_ptr = &rx_mod->rx[index];
+
+		bfa_q_qe_init(&rx_ptr->qe);
+		INIT_LIST_HEAD(&rx_ptr->rxp_q);
+		rx_ptr->bna = NULL;
+		rx_ptr->rid = index;
+		rx_ptr->stop_cbfn = NULL;
+		rx_ptr->stop_cbarg = NULL;
+
+		list_add_tail(&rx_ptr->qe, &rx_mod->rx_free_q);
+		rx_mod->rx_free_count++;
+	}
+
+	/* build RX-path queue */
+	for (index = 0; index < bna->ioceth.attr.num_rxp; index++) {
+		rxp_ptr = &rx_mod->rxp[index];
+		bfa_q_qe_init(&rxp_ptr->qe);
+		list_add_tail(&rxp_ptr->qe, &rx_mod->rxp_free_q);
+		rx_mod->rxp_free_count++;
+	}
+
+	/* build RXQ queue */
+	for (index = 0; index < (bna->ioceth.attr.num_rxp * 2); index++) {
+		rxq_ptr = &rx_mod->rxq[index];
+		bfa_q_qe_init(&rxq_ptr->qe);
+		list_add_tail(&rxq_ptr->qe, &rx_mod->rxq_free_q);
+		rx_mod->rxq_free_count++;
+	}
+}
+
+void
+bna_rx_mod_uninit(struct bna_rx_mod *rx_mod)
+{
+	struct list_head		*qe;
+	int i;
+
+	i = 0;
+	list_for_each(qe, &rx_mod->rx_free_q)
+		i++;
+
+	i = 0;
+	list_for_each(qe, &rx_mod->rxp_free_q)
+		i++;
+
+	i = 0;
+	list_for_each(qe, &rx_mod->rxq_free_q)
+		i++;
+
+	rx_mod->bna = NULL;
+}
+
+void
+bna_bfi_rx_enet_start_rsp(struct bna_rx *rx, struct bfi_msgq_mhdr *msghdr)
+{
+	struct bfi_enet_rx_cfg_rsp *cfg_rsp = &rx->bfi_enet_cmd.cfg_rsp;
+	struct bna_rxp *rxp = NULL;
+	struct bna_rxq *q0 = NULL, *q1 = NULL;
+	struct list_head *rxp_qe;
+	int i;
+
+	bfa_msgq_rsp_copy(&rx->bna->msgq, (u8 *)cfg_rsp,
+		sizeof(struct bfi_enet_rx_cfg_rsp));
+
+	rx->hw_id = cfg_rsp->hw_id;
+
+	for (i = 0, rxp_qe = bfa_q_first(&rx->rxp_q);
+		i < rx->num_paths;
+		i++, rxp_qe = bfa_q_next(rxp_qe)) {
+		rxp = (struct bna_rxp *)rxp_qe;
+		GET_RXQS(rxp, q0, q1);
+
+		/* Setup doorbells */
+		rxp->cq.ccb->i_dbell->doorbell_addr =
+			rx->bna->pcidev.pci_bar_kva
+			+ ntohl(cfg_rsp->q_handles[i].i_dbell);
+		rxp->hw_id = cfg_rsp->q_handles[i].hw_cqid;
+		q0->rcb->q_dbell =
+			rx->bna->pcidev.pci_bar_kva
+			+ ntohl(cfg_rsp->q_handles[i].ql_dbell);
+		q0->hw_id = cfg_rsp->q_handles[i].hw_lqid;
+		if (q1) {
+			q1->rcb->q_dbell =
+			rx->bna->pcidev.pci_bar_kva
+			+ ntohl(cfg_rsp->q_handles[i].qs_dbell);
+			q1->hw_id = cfg_rsp->q_handles[i].hw_sqid;
+		}
+
+		/* Initialize producer/consumer indexes */
+		(*rxp->cq.ccb->hw_producer_index) = 0;
+		rxp->cq.ccb->producer_index = 0;
+		q0->rcb->producer_index = q0->rcb->consumer_index = 0;
+		if (q1)
+			q1->rcb->producer_index = q1->rcb->consumer_index = 0;
+	}
+
+	bfa_fsm_send_event(rx, RX_E_STARTED);
+}
+
+void
+bna_bfi_rx_enet_stop_rsp(struct bna_rx *rx, struct bfi_msgq_mhdr *msghdr)
+{
+	bfa_fsm_send_event(rx, RX_E_STOPPED);
+}
+
+void
+bna_rx_res_req(struct bna_rx_config *q_cfg, struct bna_res_info *res_info)
+{
+	u32 cq_size, hq_size, dq_size;
+	u32 cpage_count, hpage_count, dpage_count;
+	struct bna_mem_info *mem_info;
+	u32 cq_depth;
+	u32 hq_depth;
+	u32 dq_depth;
+
+	dq_depth = q_cfg->q_depth;
+	hq_depth = ((q_cfg->rxp_type == BNA_RXP_SINGLE) ? 0 : q_cfg->q_depth);
+	cq_depth = dq_depth + hq_depth;
+
+	BNA_TO_POWER_OF_2_HIGH(cq_depth);
+	cq_size = cq_depth * BFI_CQ_WI_SIZE;
+	cq_size = ALIGN(cq_size, PAGE_SIZE);
+	cpage_count = SIZE_TO_PAGES(cq_size);
+
+	BNA_TO_POWER_OF_2_HIGH(dq_depth);
+	dq_size = dq_depth * BFI_RXQ_WI_SIZE;
+	dq_size = ALIGN(dq_size, PAGE_SIZE);
+	dpage_count = SIZE_TO_PAGES(dq_size);
+
+	if (BNA_RXP_SINGLE != q_cfg->rxp_type) {
+		BNA_TO_POWER_OF_2_HIGH(hq_depth);
+		hq_size = hq_depth * BFI_RXQ_WI_SIZE;
+		hq_size = ALIGN(hq_size, PAGE_SIZE);
+		hpage_count = SIZE_TO_PAGES(hq_size);
+	} else
+		hpage_count = 0;
+
+	res_info[BNA_RX_RES_MEM_T_CCB].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_CCB].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_KVA;
+	mem_info->len = sizeof(struct bna_ccb);
+	mem_info->num = q_cfg->num_paths;
+
+	res_info[BNA_RX_RES_MEM_T_RCB].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_RCB].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_KVA;
+	mem_info->len = sizeof(struct bna_rcb);
+	mem_info->num = BNA_GET_RXQS(q_cfg);
+
+	res_info[BNA_RX_RES_MEM_T_CQPT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_CQPT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = cpage_count * sizeof(struct bna_dma_addr);
+	mem_info->num = q_cfg->num_paths;
+
+	res_info[BNA_RX_RES_MEM_T_CSWQPT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_CSWQPT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_KVA;
+	mem_info->len = cpage_count * sizeof(void *);
+	mem_info->num = q_cfg->num_paths;
+
+	res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = PAGE_SIZE;
+	mem_info->num = cpage_count * q_cfg->num_paths;
+
+	res_info[BNA_RX_RES_MEM_T_DQPT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_DQPT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = dpage_count * sizeof(struct bna_dma_addr);
+	mem_info->num = q_cfg->num_paths;
+
+	res_info[BNA_RX_RES_MEM_T_DSWQPT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_DSWQPT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_KVA;
+	mem_info->len = dpage_count * sizeof(void *);
+	mem_info->num = q_cfg->num_paths;
+
+	res_info[BNA_RX_RES_MEM_T_DPAGE].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = PAGE_SIZE;
+	mem_info->num = dpage_count * q_cfg->num_paths;
+
+	res_info[BNA_RX_RES_MEM_T_HQPT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_HQPT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = hpage_count * sizeof(struct bna_dma_addr);
+	mem_info->num = (hpage_count ? q_cfg->num_paths : 0);
+
+	res_info[BNA_RX_RES_MEM_T_HSWQPT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_HSWQPT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_KVA;
+	mem_info->len = hpage_count * sizeof(void *);
+	mem_info->num = (hpage_count ? q_cfg->num_paths : 0);
+
+	res_info[BNA_RX_RES_MEM_T_HPAGE].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = (hpage_count ? PAGE_SIZE : 0);
+	mem_info->num = (hpage_count ? (hpage_count * q_cfg->num_paths) : 0);
+
+	res_info[BNA_RX_RES_MEM_T_IBIDX].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_IBIDX].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = BFI_IBIDX_SIZE;
+	mem_info->num = q_cfg->num_paths;
+
+	res_info[BNA_RX_RES_MEM_T_RIT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_RX_RES_MEM_T_RIT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_KVA;
+	mem_info->len = BFI_ENET_RSS_RIT_MAX;
+	mem_info->num = 1;
+
+	res_info[BNA_RX_RES_T_INTR].res_type = BNA_RES_T_INTR;
+	res_info[BNA_RX_RES_T_INTR].res_u.intr_info.intr_type = BNA_INTR_T_MSIX;
+	res_info[BNA_RX_RES_T_INTR].res_u.intr_info.num = q_cfg->num_paths;
+}
+
+struct bna_rx *
+bna_rx_create(struct bna *bna, struct bnad *bnad,
+		struct bna_rx_config *rx_cfg,
+		struct bna_rx_event_cbfn *rx_cbfn,
+		struct bna_res_info *res_info,
+		void *priv)
+{
+	struct bna_rx_mod *rx_mod = &bna->rx_mod;
+	struct bna_rx *rx;
+	struct bna_rxp *rxp;
+	struct bna_rxq *q0;
+	struct bna_rxq *q1;
+	struct bna_intr_info *intr_info;
+	u32 page_count;
+	struct bna_mem_descr *ccb_mem;
+	struct bna_mem_descr *rcb_mem;
+	struct bna_mem_descr *unmapq_mem;
+	struct bna_mem_descr *cqpt_mem;
+	struct bna_mem_descr *cswqpt_mem;
+	struct bna_mem_descr *cpage_mem;
+	struct bna_mem_descr *hqpt_mem;
+	struct bna_mem_descr *dqpt_mem;
+	struct bna_mem_descr *hsqpt_mem;
+	struct bna_mem_descr *dsqpt_mem;
+	struct bna_mem_descr *hpage_mem;
+	struct bna_mem_descr *dpage_mem;
+	int i, cpage_idx = 0, dpage_idx = 0, hpage_idx = 0;
+	int dpage_count, hpage_count, rcb_idx;
+
+	if (!bna_rx_res_check(rx_mod, rx_cfg))
+		return NULL;
+
+	intr_info = &res_info[BNA_RX_RES_T_INTR].res_u.intr_info;
+	ccb_mem = &res_info[BNA_RX_RES_MEM_T_CCB].res_u.mem_info.mdl[0];
+	rcb_mem = &res_info[BNA_RX_RES_MEM_T_RCB].res_u.mem_info.mdl[0];
+	unmapq_mem = &res_info[BNA_RX_RES_MEM_T_UNMAPQ].res_u.mem_info.mdl[0];
+	cqpt_mem = &res_info[BNA_RX_RES_MEM_T_CQPT].res_u.mem_info.mdl[0];
+	cswqpt_mem = &res_info[BNA_RX_RES_MEM_T_CSWQPT].res_u.mem_info.mdl[0];
+	cpage_mem = &res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info.mdl[0];
+	hqpt_mem = &res_info[BNA_RX_RES_MEM_T_HQPT].res_u.mem_info.mdl[0];
+	dqpt_mem = &res_info[BNA_RX_RES_MEM_T_DQPT].res_u.mem_info.mdl[0];
+	hsqpt_mem = &res_info[BNA_RX_RES_MEM_T_HSWQPT].res_u.mem_info.mdl[0];
+	dsqpt_mem = &res_info[BNA_RX_RES_MEM_T_DSWQPT].res_u.mem_info.mdl[0];
+	hpage_mem = &res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info.mdl[0];
+	dpage_mem = &res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info.mdl[0];
+
+	page_count = res_info[BNA_RX_RES_MEM_T_CQPT_PAGE].res_u.mem_info.num /
+			rx_cfg->num_paths;
+
+	dpage_count = res_info[BNA_RX_RES_MEM_T_DPAGE].res_u.mem_info.num /
+			rx_cfg->num_paths;
+
+	hpage_count = res_info[BNA_RX_RES_MEM_T_HPAGE].res_u.mem_info.num /
+			rx_cfg->num_paths;
+
+	rx = bna_rx_get(rx_mod, rx_cfg->rx_type);
+	rx->bna = bna;
+	rx->rx_flags = 0;
+	INIT_LIST_HEAD(&rx->rxp_q);
+	rx->stop_cbfn = NULL;
+	rx->stop_cbarg = NULL;
+	rx->priv = priv;
+
+	rx->rcb_setup_cbfn = rx_cbfn->rcb_setup_cbfn;
+	rx->rcb_destroy_cbfn = rx_cbfn->rcb_destroy_cbfn;
+	rx->ccb_setup_cbfn = rx_cbfn->ccb_setup_cbfn;
+	rx->ccb_destroy_cbfn = rx_cbfn->ccb_destroy_cbfn;
+	/* Following callbacks are mandatory */
+	rx->rx_cleanup_cbfn = rx_cbfn->rx_cleanup_cbfn;
+	rx->rx_post_cbfn = rx_cbfn->rx_post_cbfn;
+
+	if (rx->bna->rx_mod.flags & BNA_RX_MOD_F_ENET_STARTED) {
+		switch (rx->type) {
+		case BNA_RX_T_REGULAR:
+			if (!(rx->bna->rx_mod.flags &
+				BNA_RX_MOD_F_ENET_LOOPBACK))
+				rx->rx_flags |= BNA_RX_F_ENET_STARTED;
+			break;
+		case BNA_RX_T_LOOPBACK:
+			if (rx->bna->rx_mod.flags & BNA_RX_MOD_F_ENET_LOOPBACK)
+				rx->rx_flags |= BNA_RX_F_ENET_STARTED;
+			break;
+		}
+	}
+
+	rx->num_paths = rx_cfg->num_paths;
+	for (i = 0, rcb_idx = 0; i < rx->num_paths; i++) {
+		rxp = bna_rxp_get(rx_mod);
+		list_add_tail(&rxp->qe, &rx->rxp_q);
+		rxp->type = rx_cfg->rxp_type;
+		rxp->rx = rx;
+		rxp->cq.rx = rx;
+
+		q0 = bna_rxq_get(rx_mod);
+		if (BNA_RXP_SINGLE == rx_cfg->rxp_type)
+			q1 = NULL;
+		else
+			q1 = bna_rxq_get(rx_mod);
+
+		if (1 == intr_info->num)
+			rxp->vector = intr_info->idl[0].vector;
+		else
+			rxp->vector = intr_info->idl[i].vector;
+
+		/* Setup IB */
+
+		rxp->cq.ib.ib_seg_host_addr.lsb =
+		res_info[BNA_RX_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].dma.lsb;
+		rxp->cq.ib.ib_seg_host_addr.msb =
+		res_info[BNA_RX_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].dma.msb;
+		rxp->cq.ib.ib_seg_host_addr_kva =
+		res_info[BNA_RX_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].kva;
+		rxp->cq.ib.intr_type = intr_info->intr_type;
+		if (intr_info->intr_type == BNA_INTR_T_MSIX)
+			rxp->cq.ib.intr_vector = rxp->vector;
+		else
+			rxp->cq.ib.intr_vector = (1 << rxp->vector);
+		rxp->cq.ib.coalescing_timeo = rx_cfg->coalescing_timeo;
+		rxp->cq.ib.interpkt_count = BFI_RX_INTERPKT_COUNT;
+		rxp->cq.ib.interpkt_timeo = BFI_RX_INTERPKT_TIMEO;
+
+		bna_rxp_add_rxqs(rxp, q0, q1);
+
+		/* Setup large Q */
+
+		q0->rx = rx;
+		q0->rxp = rxp;
+
+		q0->rcb = (struct bna_rcb *) rcb_mem[rcb_idx].kva;
+		q0->rcb->unmap_q = (void *)unmapq_mem[rcb_idx].kva;
+		rcb_idx++;
+		q0->rcb->q_depth = rx_cfg->q_depth;
+		q0->rcb->rxq = q0;
+		q0->rcb->bnad = bna->bnad;
+		q0->rcb->id = 0;
+		q0->rx_packets = q0->rx_bytes = 0;
+		q0->rx_packets_with_error = q0->rxbuf_alloc_failed = 0;
+
+		bna_rxq_qpt_setup(q0, rxp, dpage_count, PAGE_SIZE,
+			&dqpt_mem[i], &dsqpt_mem[i], &dpage_mem[dpage_idx]);
+		q0->rcb->page_idx = dpage_idx;
+		q0->rcb->page_count = dpage_count;
+		dpage_idx += dpage_count;
+
+		if (rx->rcb_setup_cbfn)
+			rx->rcb_setup_cbfn(bnad, q0->rcb);
+
+		/* Setup small Q */
+
+		if (q1) {
+			q1->rx = rx;
+			q1->rxp = rxp;
+
+			q1->rcb = (struct bna_rcb *) rcb_mem[rcb_idx].kva;
+			q1->rcb->unmap_q = (void *)unmapq_mem[rcb_idx].kva;
+			rcb_idx++;
+			q1->rcb->q_depth = rx_cfg->q_depth;
+			q1->rcb->rxq = q1;
+			q1->rcb->bnad = bna->bnad;
+			q1->rcb->id = 1;
+			q1->buffer_size = (rx_cfg->rxp_type == BNA_RXP_HDS) ?
+					rx_cfg->hds_config.forced_offset
+					: rx_cfg->small_buff_size;
+			q1->rx_packets = q1->rx_bytes = 0;
+			q1->rx_packets_with_error = q1->rxbuf_alloc_failed = 0;
+
+			bna_rxq_qpt_setup(q1, rxp, hpage_count, PAGE_SIZE,
+				&hqpt_mem[i], &hsqpt_mem[i],
+				&hpage_mem[hpage_idx]);
+			q1->rcb->page_idx = hpage_idx;
+			q1->rcb->page_count = hpage_count;
+			hpage_idx += hpage_count;
+
+			if (rx->rcb_setup_cbfn)
+				rx->rcb_setup_cbfn(bnad, q1->rcb);
+		}
+
+		/* Setup CQ */
+
+		rxp->cq.ccb = (struct bna_ccb *) ccb_mem[i].kva;
+		rxp->cq.ccb->q_depth =	rx_cfg->q_depth +
+					((rx_cfg->rxp_type == BNA_RXP_SINGLE) ?
+					0 : rx_cfg->q_depth);
+		rxp->cq.ccb->cq = &rxp->cq;
+		rxp->cq.ccb->rcb[0] = q0->rcb;
+		q0->rcb->ccb = rxp->cq.ccb;
+		if (q1) {
+			rxp->cq.ccb->rcb[1] = q1->rcb;
+			q1->rcb->ccb = rxp->cq.ccb;
+		}
+		rxp->cq.ccb->hw_producer_index =
+			(u32 *)rxp->cq.ib.ib_seg_host_addr_kva;
+		rxp->cq.ccb->i_dbell = &rxp->cq.ib.door_bell;
+		rxp->cq.ccb->intr_type = rxp->cq.ib.intr_type;
+		rxp->cq.ccb->intr_vector = rxp->cq.ib.intr_vector;
+		rxp->cq.ccb->rx_coalescing_timeo =
+			rxp->cq.ib.coalescing_timeo;
+		rxp->cq.ccb->pkt_rate.small_pkt_cnt = 0;
+		rxp->cq.ccb->pkt_rate.large_pkt_cnt = 0;
+		rxp->cq.ccb->bnad = bna->bnad;
+		rxp->cq.ccb->id = i;
+
+		bna_rxp_cqpt_setup(rxp, page_count, PAGE_SIZE,
+			&cqpt_mem[i], &cswqpt_mem[i], &cpage_mem[cpage_idx]);
+		rxp->cq.ccb->page_idx = cpage_idx;
+		rxp->cq.ccb->page_count = page_count;
+		cpage_idx += page_count;
+
+		if (rx->ccb_setup_cbfn)
+			rx->ccb_setup_cbfn(bnad, rxp->cq.ccb);
+	}
+
+	rx->hds_cfg = rx_cfg->hds_config;
+
+	bna_rxf_init(&rx->rxf, rx, rx_cfg, res_info);
+
+	bfa_fsm_set_state(rx, bna_rx_sm_stopped);
+
+	rx_mod->rid_mask |= (1 << rx->rid);
+
+	return rx;
+}
+
+void
+bna_rx_destroy(struct bna_rx *rx)
+{
+	struct bna_rx_mod *rx_mod = &rx->bna->rx_mod;
+	struct bna_rxq *q0 = NULL;
+	struct bna_rxq *q1 = NULL;
+	struct bna_rxp *rxp;
+	struct list_head *qe;
+
+	bna_rxf_uninit(&rx->rxf);
+
+	while (!list_empty(&rx->rxp_q)) {
+		bfa_q_deq(&rx->rxp_q, &rxp);
+		GET_RXQS(rxp, q0, q1);
+		if (rx->rcb_destroy_cbfn)
+			rx->rcb_destroy_cbfn(rx->bna->bnad, q0->rcb);
+		q0->rcb = NULL;
+		q0->rxp = NULL;
+		q0->rx = NULL;
+		bna_rxq_put(rx_mod, q0);
+
+		if (q1) {
+			if (rx->rcb_destroy_cbfn)
+				rx->rcb_destroy_cbfn(rx->bna->bnad, q1->rcb);
+			q1->rcb = NULL;
+			q1->rxp = NULL;
+			q1->rx = NULL;
+			bna_rxq_put(rx_mod, q1);
+		}
+		rxp->rxq.slr.large = NULL;
+		rxp->rxq.slr.small = NULL;
+
+		if (rx->ccb_destroy_cbfn)
+			rx->ccb_destroy_cbfn(rx->bna->bnad, rxp->cq.ccb);
+		rxp->cq.ccb = NULL;
+		rxp->rx = NULL;
+		bna_rxp_put(rx_mod, rxp);
+	}
+
+	list_for_each(qe, &rx_mod->rx_active_q) {
+		if (qe == &rx->qe) {
+			list_del(&rx->qe);
+			bfa_q_qe_init(&rx->qe);
+			break;
+		}
+	}
+
+	rx_mod->rid_mask &= ~(1 << rx->rid);
+
+	rx->bna = NULL;
+	rx->priv = NULL;
+	bna_rx_put(rx_mod, rx);
+}
+
+void
+bna_rx_enable(struct bna_rx *rx)
+{
+	if (rx->fsm != (bfa_sm_t)bna_rx_sm_stopped)
+		return;
+
+	rx->rx_flags |= BNA_RX_F_ENABLED;
+	if (rx->rx_flags & BNA_RX_F_ENET_STARTED)
+		bfa_fsm_send_event(rx, RX_E_START);
+}
+
+void
+bna_rx_disable(struct bna_rx *rx, enum bna_cleanup_type type,
+		void (*cbfn)(void *, struct bna_rx *))
+{
+	if (type == BNA_SOFT_CLEANUP) {
+		/* h/w should not be accessed. Treat we're stopped */
+		(*cbfn)(rx->bna->bnad, rx);
+	} else {
+		rx->stop_cbfn = cbfn;
+		rx->stop_cbarg = rx->bna->bnad;
+
+		rx->rx_flags &= ~BNA_RX_F_ENABLED;
+
+		bfa_fsm_send_event(rx, RX_E_STOP);
+	}
+}
+
+void
+bna_rx_cleanup_complete(struct bna_rx *rx)
+{
+	bfa_fsm_send_event(rx, RX_E_CLEANUP_DONE);
+}
+
+enum bna_cb_status
+bna_rx_mode_set(struct bna_rx *rx, enum bna_rxmode new_mode,
+		enum bna_rxmode bitmask,
+		void (*cbfn)(struct bnad *, struct bna_rx *))
+{
+	struct bna_rxf *rxf = &rx->rxf;
+	int need_hw_config = 0;
+
+	/* Error checks */
+
+	if (is_promisc_enable(new_mode, bitmask)) {
+		/* If promisc mode is already enabled elsewhere in the system */
+		if ((rx->bna->promisc_rid != BFI_INVALID_RID) &&
+			(rx->bna->promisc_rid != rxf->rx->rid))
+			goto err_return;
+
+		/* If default mode is already enabled in the system */
+		if (rx->bna->default_mode_rid != BFI_INVALID_RID)
+			goto err_return;
+
+		/* Trying to enable promiscuous and default mode together */
+		if (is_default_enable(new_mode, bitmask))
+			goto err_return;
+	}
+
+	if (is_default_enable(new_mode, bitmask)) {
+		/* If default mode is already enabled elsewhere in the system */
+		if ((rx->bna->default_mode_rid != BFI_INVALID_RID) &&
+			(rx->bna->default_mode_rid != rxf->rx->rid)) {
+				goto err_return;
+		}
+
+		/* If promiscuous mode is already enabled in the system */
+		if (rx->bna->promisc_rid != BFI_INVALID_RID)
+			goto err_return;
+	}
+
+	/* Process the commands */
+
+	if (is_promisc_enable(new_mode, bitmask)) {
+		if (bna_rxf_promisc_enable(rxf))
+			need_hw_config = 1;
+	} else if (is_promisc_disable(new_mode, bitmask)) {
+		if (bna_rxf_promisc_disable(rxf))
+			need_hw_config = 1;
+	}
+
+	if (is_allmulti_enable(new_mode, bitmask)) {
+		if (bna_rxf_allmulti_enable(rxf))
+			need_hw_config = 1;
+	} else if (is_allmulti_disable(new_mode, bitmask)) {
+		if (bna_rxf_allmulti_disable(rxf))
+			need_hw_config = 1;
+	}
+
+	/* Trigger h/w if needed */
+
+	if (need_hw_config) {
+		rxf->cam_fltr_cbfn = cbfn;
+		rxf->cam_fltr_cbarg = rx->bna->bnad;
+		bfa_fsm_send_event(rxf, RXF_E_CONFIG);
+	} else if (cbfn)
+		(*cbfn)(rx->bna->bnad, rx);
+
+	return BNA_CB_SUCCESS;
+
+err_return:
+	return BNA_CB_FAIL;
+}
+
+void
+bna_rx_vlanfilter_enable(struct bna_rx *rx)
+{
+	struct bna_rxf *rxf = &rx->rxf;
+
+	if (rxf->vlan_filter_status == BNA_STATUS_T_DISABLED) {
+		rxf->vlan_filter_status = BNA_STATUS_T_ENABLED;
+		rxf->vlan_pending_bitmask = (u8)BFI_VLAN_BMASK_ALL;
+		bfa_fsm_send_event(rxf, RXF_E_CONFIG);
+	}
+}
+
+void
+bna_rx_coalescing_timeo_set(struct bna_rx *rx, int coalescing_timeo)
+{
+	struct bna_rxp *rxp;
+	struct list_head *qe;
+
+	list_for_each(qe, &rx->rxp_q) {
+		rxp = (struct bna_rxp *)qe;
+		rxp->cq.ccb->rx_coalescing_timeo = coalescing_timeo;
+		bna_ib_coalescing_timeo_set(&rxp->cq.ib, coalescing_timeo);
+	}
+}
+
+void
+bna_rx_dim_reconfig(struct bna *bna, const u32 vector[][BNA_BIAS_T_MAX])
+{
+	int i, j;
+
+	for (i = 0; i < BNA_LOAD_T_MAX; i++)
+		for (j = 0; j < BNA_BIAS_T_MAX; j++)
+			bna->rx_mod.dim_vector[i][j] = vector[i][j];
+}
+
+void
+bna_rx_dim_update(struct bna_ccb *ccb)
+{
+	struct bna *bna = ccb->cq->rx->bna;
+	u32 load, bias;
+	u32 pkt_rt, small_rt, large_rt;
+	u8 coalescing_timeo;
+
+	if ((ccb->pkt_rate.small_pkt_cnt == 0) &&
+		(ccb->pkt_rate.large_pkt_cnt == 0))
+		return;
+
+	/* Arrive at preconfigured coalescing timeo value based on pkt rate */
+
+	small_rt = ccb->pkt_rate.small_pkt_cnt;
+	large_rt = ccb->pkt_rate.large_pkt_cnt;
+
+	pkt_rt = small_rt + large_rt;
+
+	if (pkt_rt < BNA_PKT_RATE_10K)
+		load = BNA_LOAD_T_LOW_4;
+	else if (pkt_rt < BNA_PKT_RATE_20K)
+		load = BNA_LOAD_T_LOW_3;
+	else if (pkt_rt < BNA_PKT_RATE_30K)
+		load = BNA_LOAD_T_LOW_2;
+	else if (pkt_rt < BNA_PKT_RATE_40K)
+		load = BNA_LOAD_T_LOW_1;
+	else if (pkt_rt < BNA_PKT_RATE_50K)
+		load = BNA_LOAD_T_HIGH_1;
+	else if (pkt_rt < BNA_PKT_RATE_60K)
+		load = BNA_LOAD_T_HIGH_2;
+	else if (pkt_rt < BNA_PKT_RATE_80K)
+		load = BNA_LOAD_T_HIGH_3;
+	else
+		load = BNA_LOAD_T_HIGH_4;
+
+	if (small_rt > (large_rt << 1))
+		bias = 0;
+	else
+		bias = 1;
+
+	ccb->pkt_rate.small_pkt_cnt = 0;
+	ccb->pkt_rate.large_pkt_cnt = 0;
+
+	coalescing_timeo = bna->rx_mod.dim_vector[load][bias];
+	ccb->rx_coalescing_timeo = coalescing_timeo;
+
+	/* Set it to IB */
+	bna_ib_coalescing_timeo_set(&ccb->cq->ib, coalescing_timeo);
+}
+
+const u32 bna_napi_dim_vector[BNA_LOAD_T_MAX][BNA_BIAS_T_MAX] = {
+	{12, 12},
+	{6, 10},
+	{5, 10},
+	{4, 8},
+	{3, 6},
+	{3, 6},
+	{2, 4},
+	{1, 2},
+};
+
+/**
+ * TX
+ */
+#define call_tx_stop_cbfn(tx)						\
+do {									\
+	if ((tx)->stop_cbfn) {						\
+		void (*cbfn)(void *, struct bna_tx *);		\
+		void *cbarg;						\
+		cbfn = (tx)->stop_cbfn;					\
+		cbarg = (tx)->stop_cbarg;				\
+		(tx)->stop_cbfn = NULL;					\
+		(tx)->stop_cbarg = NULL;				\
+		cbfn(cbarg, (tx));					\
+	}								\
+} while (0)
+
+#define call_tx_prio_change_cbfn(tx)					\
+do {									\
+	if ((tx)->prio_change_cbfn) {					\
+		void (*cbfn)(struct bnad *, struct bna_tx *);	\
+		cbfn = (tx)->prio_change_cbfn;				\
+		(tx)->prio_change_cbfn = NULL;				\
+		cbfn((tx)->bna->bnad, (tx));				\
+	}								\
+} while (0)
+
+static void bna_tx_mod_cb_tx_stopped(void *tx_mod, struct bna_tx *tx);
+static void bna_bfi_tx_enet_start(struct bna_tx *tx);
+static void bna_tx_enet_stop(struct bna_tx *tx);
+
+enum bna_tx_event {
+	TX_E_START			= 1,
+	TX_E_STOP			= 2,
+	TX_E_FAIL			= 3,
+	TX_E_STARTED			= 4,
+	TX_E_STOPPED			= 5,
+	TX_E_PRIO_CHANGE		= 6,
+	TX_E_CLEANUP_DONE		= 7,
+	TX_E_BW_UPDATE			= 8,
+};
+
+bfa_fsm_state_decl(bna_tx, stopped, struct bna_tx, enum bna_tx_event);
+bfa_fsm_state_decl(bna_tx, start_wait, struct bna_tx, enum bna_tx_event);
+bfa_fsm_state_decl(bna_tx, started, struct bna_tx, enum bna_tx_event);
+bfa_fsm_state_decl(bna_tx, stop_wait, struct bna_tx, enum bna_tx_event);
+bfa_fsm_state_decl(bna_tx, cleanup_wait, struct bna_tx,
+			enum bna_tx_event);
+bfa_fsm_state_decl(bna_tx, prio_stop_wait, struct bna_tx,
+			enum bna_tx_event);
+bfa_fsm_state_decl(bna_tx, prio_cleanup_wait, struct bna_tx,
+			enum bna_tx_event);
+bfa_fsm_state_decl(bna_tx, failed, struct bna_tx, enum bna_tx_event);
+bfa_fsm_state_decl(bna_tx, quiesce_wait, struct bna_tx,
+			enum bna_tx_event);
+
+static void
+bna_tx_sm_stopped_entry(struct bna_tx *tx)
+{
+	call_tx_stop_cbfn(tx);
+}
+
+static void
+bna_tx_sm_stopped(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_START:
+		bfa_fsm_set_state(tx, bna_tx_sm_start_wait);
+		break;
+
+	case TX_E_STOP:
+		call_tx_stop_cbfn(tx);
+		break;
+
+	case TX_E_FAIL:
+		/* No-op */
+		break;
+
+	case TX_E_PRIO_CHANGE:
+		call_tx_prio_change_cbfn(tx);
+		break;
+
+	case TX_E_BW_UPDATE:
+		/* No-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_tx_sm_start_wait_entry(struct bna_tx *tx)
+{
+	bna_bfi_tx_enet_start(tx);
+}
+
+static void
+bna_tx_sm_start_wait(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_STOP:
+		tx->flags &= ~(BNA_TX_F_PRIO_CHANGED | BNA_TX_F_BW_UPDATED);
+		bfa_fsm_set_state(tx, bna_tx_sm_stop_wait);
+		break;
+
+	case TX_E_FAIL:
+		tx->flags &= ~(BNA_TX_F_PRIO_CHANGED | BNA_TX_F_BW_UPDATED);
+		bfa_fsm_set_state(tx, bna_tx_sm_stopped);
+		break;
+
+	case TX_E_STARTED:
+		if (tx->flags & (BNA_TX_F_PRIO_CHANGED | BNA_TX_F_BW_UPDATED)) {
+			tx->flags &= ~(BNA_TX_F_PRIO_CHANGED |
+				BNA_TX_F_BW_UPDATED);
+			bfa_fsm_set_state(tx, bna_tx_sm_prio_stop_wait);
+		} else
+			bfa_fsm_set_state(tx, bna_tx_sm_started);
+		break;
+
+	case TX_E_PRIO_CHANGE:
+		tx->flags |=  BNA_TX_F_PRIO_CHANGED;
+		break;
+
+	case TX_E_BW_UPDATE:
+		tx->flags |= BNA_TX_F_BW_UPDATED;
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_tx_sm_started_entry(struct bna_tx *tx)
+{
+	struct bna_txq *txq;
+	struct list_head		 *qe;
+	int is_regular = (tx->type == BNA_TX_T_REGULAR);
+
+	list_for_each(qe, &tx->txq_q) {
+		txq = (struct bna_txq *)qe;
+		txq->tcb->priority = txq->priority;
+		/* Start IB */
+		bna_ib_start(tx->bna, &txq->ib, is_regular);
+	}
+	tx->tx_resume_cbfn(tx->bna->bnad, tx);
+}
+
+static void
+bna_tx_sm_started(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_STOP:
+		bfa_fsm_set_state(tx, bna_tx_sm_stop_wait);
+		tx->tx_stall_cbfn(tx->bna->bnad, tx);
+		bna_tx_enet_stop(tx);
+		break;
+
+	case TX_E_FAIL:
+		bfa_fsm_set_state(tx, bna_tx_sm_failed);
+		tx->tx_stall_cbfn(tx->bna->bnad, tx);
+		tx->tx_cleanup_cbfn(tx->bna->bnad, tx);
+		break;
+
+	case TX_E_PRIO_CHANGE:
+	case TX_E_BW_UPDATE:
+		bfa_fsm_set_state(tx, bna_tx_sm_prio_stop_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_tx_sm_stop_wait_entry(struct bna_tx *tx)
+{
+}
+
+static void
+bna_tx_sm_stop_wait(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_FAIL:
+	case TX_E_STOPPED:
+		bfa_fsm_set_state(tx, bna_tx_sm_cleanup_wait);
+		tx->tx_cleanup_cbfn(tx->bna->bnad, tx);
+		break;
+
+	case TX_E_STARTED:
+		/**
+		 * We are here due to start_wait -> stop_wait transition on
+		 * TX_E_STOP event
+		 */
+		bna_tx_enet_stop(tx);
+		break;
+
+	case TX_E_PRIO_CHANGE:
+	case TX_E_BW_UPDATE:
+		/* No-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_tx_sm_cleanup_wait_entry(struct bna_tx *tx)
+{
+}
+
+static void
+bna_tx_sm_cleanup_wait(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_FAIL:
+	case TX_E_PRIO_CHANGE:
+	case TX_E_BW_UPDATE:
+		/* No-op */
+		break;
+
+	case TX_E_CLEANUP_DONE:
+		bfa_fsm_set_state(tx, bna_tx_sm_stopped);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_tx_sm_prio_stop_wait_entry(struct bna_tx *tx)
+{
+	tx->tx_stall_cbfn(tx->bna->bnad, tx);
+	bna_tx_enet_stop(tx);
+}
+
+static void
+bna_tx_sm_prio_stop_wait(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_STOP:
+		bfa_fsm_set_state(tx, bna_tx_sm_stop_wait);
+		break;
+
+	case TX_E_FAIL:
+		bfa_fsm_set_state(tx, bna_tx_sm_failed);
+		call_tx_prio_change_cbfn(tx);
+		tx->tx_cleanup_cbfn(tx->bna->bnad, tx);
+		break;
+
+	case TX_E_STOPPED:
+		bfa_fsm_set_state(tx, bna_tx_sm_prio_cleanup_wait);
+		break;
+
+	case TX_E_PRIO_CHANGE:
+	case TX_E_BW_UPDATE:
+		/* No-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_tx_sm_prio_cleanup_wait_entry(struct bna_tx *tx)
+{
+	call_tx_prio_change_cbfn(tx);
+	tx->tx_cleanup_cbfn(tx->bna->bnad, tx);
+}
+
+static void
+bna_tx_sm_prio_cleanup_wait(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_STOP:
+		bfa_fsm_set_state(tx, bna_tx_sm_cleanup_wait);
+		break;
+
+	case TX_E_FAIL:
+		bfa_fsm_set_state(tx, bna_tx_sm_failed);
+		break;
+
+	case TX_E_PRIO_CHANGE:
+	case TX_E_BW_UPDATE:
+		/* No-op */
+		break;
+
+	case TX_E_CLEANUP_DONE:
+		bfa_fsm_set_state(tx, bna_tx_sm_start_wait);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_tx_sm_failed_entry(struct bna_tx *tx)
+{
+}
+
+static void
+bna_tx_sm_failed(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_START:
+		bfa_fsm_set_state(tx, bna_tx_sm_quiesce_wait);
+		break;
+
+	case TX_E_STOP:
+		bfa_fsm_set_state(tx, bna_tx_sm_cleanup_wait);
+		break;
+
+	case TX_E_FAIL:
+		/* No-op */
+		break;
+
+	case TX_E_CLEANUP_DONE:
+		bfa_fsm_set_state(tx, bna_tx_sm_stopped);
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_tx_sm_quiesce_wait_entry(struct bna_tx *tx)
+{
+}
+
+static void
+bna_tx_sm_quiesce_wait(struct bna_tx *tx, enum bna_tx_event event)
+{
+	switch (event) {
+	case TX_E_STOP:
+		bfa_fsm_set_state(tx, bna_tx_sm_cleanup_wait);
+		break;
+
+	case TX_E_FAIL:
+		bfa_fsm_set_state(tx, bna_tx_sm_failed);
+		break;
+
+	case TX_E_CLEANUP_DONE:
+		bfa_fsm_set_state(tx, bna_tx_sm_start_wait);
+		break;
+
+	case TX_E_BW_UPDATE:
+		/* No-op */
+		break;
+
+	default:
+		bfa_sm_fault(event);
+	}
+}
+
+static void
+bna_bfi_tx_enet_start(struct bna_tx *tx)
+{
+	struct bfi_enet_tx_cfg_req *cfg_req = &tx->bfi_enet_cmd.cfg_req;
+	struct bna_txq *txq = NULL;
+	struct list_head *qe;
+	int i;
+
+	bfi_msgq_mhdr_set(cfg_req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_TX_CFG_SET_REQ, 0, tx->rid);
+	cfg_req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_tx_cfg_req)));
+
+	cfg_req->num_queues = tx->num_txq;
+	for (i = 0, qe = bfa_q_first(&tx->txq_q);
+		i < tx->num_txq;
+		i++, qe = bfa_q_next(qe)) {
+		txq = (struct bna_txq *)qe;
+
+		bfi_enet_datapath_q_init(&cfg_req->q_cfg[i].q.q, &txq->qpt);
+		cfg_req->q_cfg[i].q.priority = txq->priority;
+
+		cfg_req->q_cfg[i].ib.index_addr.a32.addr_lo =
+			txq->ib.ib_seg_host_addr.lsb;
+		cfg_req->q_cfg[i].ib.index_addr.a32.addr_hi =
+			txq->ib.ib_seg_host_addr.msb;
+		cfg_req->q_cfg[i].ib.intr.msix_index =
+			htons((u16)txq->ib.intr_vector);
+	}
+
+	cfg_req->ib_cfg.int_pkt_dma = BNA_STATUS_T_ENABLED;
+	cfg_req->ib_cfg.int_enabled = BNA_STATUS_T_ENABLED;
+	cfg_req->ib_cfg.int_pkt_enabled = BNA_STATUS_T_DISABLED;
+	cfg_req->ib_cfg.continuous_coalescing = BNA_STATUS_T_ENABLED;
+	cfg_req->ib_cfg.msix = (txq->ib.intr_type == BNA_INTR_T_MSIX)
+				? BNA_STATUS_T_ENABLED : BNA_STATUS_T_DISABLED;
+	cfg_req->ib_cfg.coalescing_timeout =
+			htonl((u32)txq->ib.coalescing_timeo);
+	cfg_req->ib_cfg.inter_pkt_timeout =
+			htonl((u32)txq->ib.interpkt_timeo);
+	cfg_req->ib_cfg.inter_pkt_count = (u8)txq->ib.interpkt_count;
+
+	cfg_req->tx_cfg.vlan_mode = BFI_ENET_TX_VLAN_WI;
+	cfg_req->tx_cfg.vlan_id = htons((u16)tx->txf_vlan_id);
+	cfg_req->tx_cfg.admit_tagged_frame = BNA_STATUS_T_DISABLED;
+	cfg_req->tx_cfg.apply_vlan_filter = BNA_STATUS_T_DISABLED;
+
+	bfa_msgq_cmd_set(&tx->msgq_cmd, NULL, NULL,
+		sizeof(struct bfi_enet_tx_cfg_req), &cfg_req->mh);
+	bfa_msgq_cmd_post(&tx->bna->msgq, &tx->msgq_cmd);
+}
+
+static void
+bna_bfi_tx_enet_stop(struct bna_tx *tx)
+{
+	struct bfi_enet_req *req = &tx->bfi_enet_cmd.req;
+
+	bfi_msgq_mhdr_set(req->mh, BFI_MC_ENET,
+		BFI_ENET_H2I_TX_CFG_CLR_REQ, 0, tx->rid);
+	req->mh.num_entries = htons(
+		bfi_msgq_num_cmd_entries(sizeof(struct bfi_enet_req)));
+	bfa_msgq_cmd_set(&tx->msgq_cmd, NULL, NULL, sizeof(struct bfi_enet_req),
+		&req->mh);
+	bfa_msgq_cmd_post(&tx->bna->msgq, &tx->msgq_cmd);
+}
+
+static void
+bna_tx_enet_stop(struct bna_tx *tx)
+{
+	struct bna_txq *txq;
+	struct list_head		 *qe;
+
+	/* Stop IB */
+	list_for_each(qe, &tx->txq_q) {
+		txq = (struct bna_txq *)qe;
+		bna_ib_stop(tx->bna, &txq->ib);
+	}
+
+	bna_bfi_tx_enet_stop(tx);
+}
+
+static void
+bna_txq_qpt_setup(struct bna_txq *txq, int page_count, int page_size,
+		struct bna_mem_descr *qpt_mem,
+		struct bna_mem_descr *swqpt_mem,
+		struct bna_mem_descr *page_mem)
+{
+	int i;
+
+	txq->qpt.hw_qpt_ptr.lsb = qpt_mem->dma.lsb;
+	txq->qpt.hw_qpt_ptr.msb = qpt_mem->dma.msb;
+	txq->qpt.kv_qpt_ptr = qpt_mem->kva;
+	txq->qpt.page_count = page_count;
+	txq->qpt.page_size = page_size;
+
+	txq->tcb->sw_qpt = (void **) swqpt_mem->kva;
+
+	for (i = 0; i < page_count; i++) {
+		txq->tcb->sw_qpt[i] = page_mem[i].kva;
+
+		((struct bna_dma_addr *)txq->qpt.kv_qpt_ptr)[i].lsb =
+			page_mem[i].dma.lsb;
+		((struct bna_dma_addr *)txq->qpt.kv_qpt_ptr)[i].msb =
+			page_mem[i].dma.msb;
+	}
+}
+
+static struct bna_tx *
+bna_tx_get(struct bna_tx_mod *tx_mod, enum bna_tx_type type)
+{
+	struct list_head	*qe = NULL;
+	struct bna_tx *tx = NULL;
+
+	if (list_empty(&tx_mod->tx_free_q))
+		return NULL;
+	if (type == BNA_TX_T_REGULAR) {
+		bfa_q_deq(&tx_mod->tx_free_q, &qe);
+	} else {
+		bfa_q_deq_tail(&tx_mod->tx_free_q, &qe);
+	}
+	tx = (struct bna_tx *)qe;
+	bfa_q_qe_init(&tx->qe);
+	tx->type = type;
+
+	return tx;
+}
+
+static void
+bna_tx_free(struct bna_tx *tx)
+{
+	struct bna_tx_mod *tx_mod = &tx->bna->tx_mod;
+	struct bna_txq *txq;
+	struct list_head *prev_qe;
+	struct list_head *qe;
+
+	while (!list_empty(&tx->txq_q)) {
+		bfa_q_deq(&tx->txq_q, &txq);
+		bfa_q_qe_init(&txq->qe);
+		txq->tcb = NULL;
+		txq->tx = NULL;
+		list_add_tail(&txq->qe, &tx_mod->txq_free_q);
+	}
+
+	list_for_each(qe, &tx_mod->tx_active_q) {
+		if (qe == &tx->qe) {
+			list_del(&tx->qe);
+			bfa_q_qe_init(&tx->qe);
+			break;
+		}
+	}
+
+	tx->bna = NULL;
+	tx->priv = NULL;
+
+	prev_qe = NULL;
+	list_for_each(qe, &tx_mod->tx_free_q) {
+		if (((struct bna_tx *)qe)->rid < tx->rid)
+			prev_qe = qe;
+		else {
+			break;
+		}
+	}
+
+	if (prev_qe == NULL) {
+		/* This is the first entry */
+		bfa_q_enq_head(&tx_mod->tx_free_q, &tx->qe);
+	} else if (bfa_q_next(prev_qe) == &tx_mod->tx_free_q) {
+		/* This is the last entry */
+		list_add_tail(&tx->qe, &tx_mod->tx_free_q);
+	} else {
+		/* Somewhere in the middle */
+		bfa_q_next(&tx->qe) = bfa_q_next(prev_qe);
+		bfa_q_prev(&tx->qe) = prev_qe;
+		bfa_q_next(prev_qe) = &tx->qe;
+		bfa_q_prev(bfa_q_next(&tx->qe)) = &tx->qe;
+	}
+}
+
+static void
+bna_tx_start(struct bna_tx *tx)
+{
+	tx->flags |= BNA_TX_F_ENET_STARTED;
+	if (tx->flags & BNA_TX_F_ENABLED)
+		bfa_fsm_send_event(tx, TX_E_START);
+}
+
+static void
+bna_tx_stop(struct bna_tx *tx)
+{
+	tx->stop_cbfn = bna_tx_mod_cb_tx_stopped;
+	tx->stop_cbarg = &tx->bna->tx_mod;
+
+	tx->flags &= ~BNA_TX_F_ENET_STARTED;
+	bfa_fsm_send_event(tx, TX_E_STOP);
+}
+
+static void
+bna_tx_fail(struct bna_tx *tx)
+{
+	tx->flags &= ~BNA_TX_F_ENET_STARTED;
+	bfa_fsm_send_event(tx, TX_E_FAIL);
+}
+
+void
+bna_bfi_tx_enet_start_rsp(struct bna_tx *tx, struct bfi_msgq_mhdr *msghdr)
+{
+	struct bfi_enet_tx_cfg_rsp *cfg_rsp = &tx->bfi_enet_cmd.cfg_rsp;
+	struct bna_txq *txq = NULL;
+	struct list_head *qe;
+	int i;
+
+	bfa_msgq_rsp_copy(&tx->bna->msgq, (u8 *)cfg_rsp,
+		sizeof(struct bfi_enet_tx_cfg_rsp));
+
+	tx->hw_id = cfg_rsp->hw_id;
+
+	for (i = 0, qe = bfa_q_first(&tx->txq_q);
+		i < tx->num_txq; i++, qe = bfa_q_next(qe)) {
+		txq = (struct bna_txq *)qe;
+
+		/* Setup doorbells */
+		txq->tcb->i_dbell->doorbell_addr =
+			tx->bna->pcidev.pci_bar_kva
+			+ ntohl(cfg_rsp->q_handles[i].i_dbell);
+		txq->tcb->q_dbell =
+			tx->bna->pcidev.pci_bar_kva
+			+ ntohl(cfg_rsp->q_handles[i].q_dbell);
+		txq->hw_id = cfg_rsp->q_handles[i].hw_qid;
+
+		/* Initialize producer/consumer indexes */
+		(*txq->tcb->hw_consumer_index) = 0;
+		txq->tcb->producer_index = txq->tcb->consumer_index = 0;
+	}
+
+	bfa_fsm_send_event(tx, TX_E_STARTED);
+}
+
+void
+bna_bfi_tx_enet_stop_rsp(struct bna_tx *tx, struct bfi_msgq_mhdr *msghdr)
+{
+	bfa_fsm_send_event(tx, TX_E_STOPPED);
+}
+
+void
+bna_bfi_bw_update_aen(struct bna_tx_mod *tx_mod)
+{
+	struct bna_tx *tx;
+	struct list_head		*qe;
+
+	list_for_each(qe, &tx_mod->tx_active_q) {
+		tx = (struct bna_tx *)qe;
+		bfa_fsm_send_event(tx, TX_E_BW_UPDATE);
+	}
+}
+
+void
+bna_tx_res_req(int num_txq, int txq_depth, struct bna_res_info *res_info)
+{
+	u32 q_size;
+	u32 page_count;
+	struct bna_mem_info *mem_info;
+
+	res_info[BNA_TX_RES_MEM_T_TCB].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_TX_RES_MEM_T_TCB].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_KVA;
+	mem_info->len = sizeof(struct bna_tcb);
+	mem_info->num = num_txq;
+
+	q_size = txq_depth * BFI_TXQ_WI_SIZE;
+	q_size = ALIGN(q_size, PAGE_SIZE);
+	page_count = q_size >> PAGE_SHIFT;
+
+	res_info[BNA_TX_RES_MEM_T_QPT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_TX_RES_MEM_T_QPT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = page_count * sizeof(struct bna_dma_addr);
+	mem_info->num = num_txq;
+
+	res_info[BNA_TX_RES_MEM_T_SWQPT].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_TX_RES_MEM_T_SWQPT].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_KVA;
+	mem_info->len = page_count * sizeof(void *);
+	mem_info->num = num_txq;
+
+	res_info[BNA_TX_RES_MEM_T_PAGE].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = PAGE_SIZE;
+	mem_info->num = num_txq * page_count;
+
+	res_info[BNA_TX_RES_MEM_T_IBIDX].res_type = BNA_RES_T_MEM;
+	mem_info = &res_info[BNA_TX_RES_MEM_T_IBIDX].res_u.mem_info;
+	mem_info->mem_type = BNA_MEM_T_DMA;
+	mem_info->len = BFI_IBIDX_SIZE;
+	mem_info->num = num_txq;
+
+	res_info[BNA_TX_RES_INTR_T_TXCMPL].res_type = BNA_RES_T_INTR;
+	res_info[BNA_TX_RES_INTR_T_TXCMPL].res_u.intr_info.intr_type =
+			BNA_INTR_T_MSIX;
+	res_info[BNA_TX_RES_INTR_T_TXCMPL].res_u.intr_info.num = num_txq;
+}
+
+struct bna_tx *
+bna_tx_create(struct bna *bna, struct bnad *bnad,
+		struct bna_tx_config *tx_cfg,
+		struct bna_tx_event_cbfn *tx_cbfn,
+		struct bna_res_info *res_info, void *priv)
+{
+	struct bna_intr_info *intr_info;
+	struct bna_tx_mod *tx_mod = &bna->tx_mod;
+	struct bna_tx *tx;
+	struct bna_txq *txq;
+	struct list_head *qe;
+	int page_count;
+	int page_size;
+	int page_idx;
+	int i;
+
+	intr_info = &res_info[BNA_TX_RES_INTR_T_TXCMPL].res_u.intr_info;
+	page_count = (res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info.num) /
+			tx_cfg->num_txq;
+	page_size = res_info[BNA_TX_RES_MEM_T_PAGE].res_u.mem_info.len;
+
+	/**
+	 * Get resources
+	 */
+
+	if ((intr_info->num != 1) && (intr_info->num != tx_cfg->num_txq))
+		return NULL;
+
+	/* Tx */
+
+	tx = bna_tx_get(tx_mod, tx_cfg->tx_type);
+	if (!tx)
+		return NULL;
+	tx->bna = bna;
+	tx->priv = priv;
+
+	/* TxQs */
+
+	INIT_LIST_HEAD(&tx->txq_q);
+	for (i = 0; i < tx_cfg->num_txq; i++) {
+		if (list_empty(&tx_mod->txq_free_q))
+			goto err_return;
+
+		bfa_q_deq(&tx_mod->txq_free_q, &txq);
+		bfa_q_qe_init(&txq->qe);
+		list_add_tail(&txq->qe, &tx->txq_q);
+		txq->tx = tx;
+	}
+
+	/*
+	 * Initialize
+	 */
+
+	/* Tx */
+
+	tx->tcb_setup_cbfn = tx_cbfn->tcb_setup_cbfn;
+	tx->tcb_destroy_cbfn = tx_cbfn->tcb_destroy_cbfn;
+	/* Following callbacks are mandatory */
+	tx->tx_stall_cbfn = tx_cbfn->tx_stall_cbfn;
+	tx->tx_resume_cbfn = tx_cbfn->tx_resume_cbfn;
+	tx->tx_cleanup_cbfn = tx_cbfn->tx_cleanup_cbfn;
+
+	list_add_tail(&tx->qe, &tx_mod->tx_active_q);
+
+	tx->num_txq = tx_cfg->num_txq;
+
+	tx->flags = 0;
+	if (tx->bna->tx_mod.flags & BNA_TX_MOD_F_ENET_STARTED) {
+		switch (tx->type) {
+		case BNA_TX_T_REGULAR:
+			if (!(tx->bna->tx_mod.flags &
+				BNA_TX_MOD_F_ENET_LOOPBACK))
+				tx->flags |= BNA_TX_F_ENET_STARTED;
+			break;
+		case BNA_TX_T_LOOPBACK:
+			if (tx->bna->tx_mod.flags & BNA_TX_MOD_F_ENET_LOOPBACK)
+				tx->flags |= BNA_TX_F_ENET_STARTED;
+			break;
+		}
+	}
+
+	/* TxQ */
+
+	i = 0;
+	page_idx = 0;
+	list_for_each(qe, &tx->txq_q) {
+		txq = (struct bna_txq *)qe;
+		txq->tcb = (struct bna_tcb *)
+		res_info[BNA_TX_RES_MEM_T_TCB].res_u.mem_info.mdl[i].kva;
+		txq->tx_packets = 0;
+		txq->tx_bytes = 0;
+
+		/* IB */
+		txq->ib.ib_seg_host_addr.lsb =
+		res_info[BNA_TX_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].dma.lsb;
+		txq->ib.ib_seg_host_addr.msb =
+		res_info[BNA_TX_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].dma.msb;
+		txq->ib.ib_seg_host_addr_kva =
+		res_info[BNA_TX_RES_MEM_T_IBIDX].res_u.mem_info.mdl[i].kva;
+		txq->ib.intr_type = intr_info->intr_type;
+		txq->ib.intr_vector = (intr_info->num == 1) ?
+					intr_info->idl[0].vector :
+					intr_info->idl[i].vector;
+		if (intr_info->intr_type == BNA_INTR_T_INTX)
+			txq->ib.intr_vector = (1 <<  txq->ib.intr_vector);
+		txq->ib.coalescing_timeo = tx_cfg->coalescing_timeo;
+		txq->ib.interpkt_timeo = 0; /* Not used */
+		txq->ib.interpkt_count = BFI_TX_INTERPKT_COUNT;
+
+		/* TCB */
+
+		txq->tcb->q_depth = tx_cfg->txq_depth;
+		txq->tcb->unmap_q = (void *)
+		res_info[BNA_TX_RES_MEM_T_UNMAPQ].res_u.mem_info.mdl[i].kva;
+		txq->tcb->hw_consumer_index =
+			(u32 *)txq->ib.ib_seg_host_addr_kva;
+		txq->tcb->i_dbell = &txq->ib.door_bell;
+		txq->tcb->intr_type = txq->ib.intr_type;
+		txq->tcb->intr_vector = txq->ib.intr_vector;
+		txq->tcb->txq = txq;
+		txq->tcb->bnad = bnad;
+		txq->tcb->id = i;
+
+		/* QPT, SWQPT, Pages */
+		bna_txq_qpt_setup(txq, page_count, page_size,
+			&res_info[BNA_TX_RES_MEM_T_QPT].res_u.mem_info.mdl[i],
+			&res_info[BNA_TX_RES_MEM_T_SWQPT].res_u.mem_info.mdl[i],
+			&res_info[BNA_TX_RES_MEM_T_PAGE].
+				  res_u.mem_info.mdl[page_idx]);
+		txq->tcb->page_idx = page_idx;
+		txq->tcb->page_count = page_count;
+		page_idx += page_count;
+
+		/* Callback to bnad for setting up TCB */
+		if (tx->tcb_setup_cbfn)
+			(tx->tcb_setup_cbfn)(bna->bnad, txq->tcb);
+
+		if (tx_cfg->num_txq == BFI_TX_MAX_PRIO)
+			txq->priority = txq->tcb->id;
+		else
+			txq->priority = tx_mod->default_prio;
+
+		i++;
+	}
+
+	tx->txf_vlan_id = 0;
+
+	bfa_fsm_set_state(tx, bna_tx_sm_stopped);
+
+	tx_mod->rid_mask |= (1 << tx->rid);
+
+	return tx;
+
+err_return:
+	bna_tx_free(tx);
+	return NULL;
+}
+
+void
+bna_tx_destroy(struct bna_tx *tx)
+{
+	struct bna_txq *txq;
+	struct list_head *qe;
+
+	list_for_each(qe, &tx->txq_q) {
+		txq = (struct bna_txq *)qe;
+		if (tx->tcb_destroy_cbfn)
+			(tx->tcb_destroy_cbfn)(tx->bna->bnad, txq->tcb);
+	}
+
+	tx->bna->tx_mod.rid_mask &= ~(1 << tx->rid);
+	bna_tx_free(tx);
+}
+
+void
+bna_tx_enable(struct bna_tx *tx)
+{
+	if (tx->fsm != (bfa_sm_t)bna_tx_sm_stopped)
+		return;
+
+	tx->flags |= BNA_TX_F_ENABLED;
+
+	if (tx->flags & BNA_TX_F_ENET_STARTED)
+		bfa_fsm_send_event(tx, TX_E_START);
+}
+
+void
+bna_tx_disable(struct bna_tx *tx, enum bna_cleanup_type type,
+		void (*cbfn)(void *, struct bna_tx *))
+{
+	if (type == BNA_SOFT_CLEANUP) {
+		(*cbfn)(tx->bna->bnad, tx);
+		return;
+	}
+
+	tx->stop_cbfn = cbfn;
+	tx->stop_cbarg = tx->bna->bnad;
+
+	tx->flags &= ~BNA_TX_F_ENABLED;
+
+	bfa_fsm_send_event(tx, TX_E_STOP);
+}
+
+void
+bna_tx_cleanup_complete(struct bna_tx *tx)
+{
+	bfa_fsm_send_event(tx, TX_E_CLEANUP_DONE);
+}
+
+static void
+bna_tx_mod_cb_tx_stopped(void *arg, struct bna_tx *tx)
+{
+	struct bna_tx_mod *tx_mod = (struct bna_tx_mod *)arg;
+
+	bfa_wc_down(&tx_mod->tx_stop_wc);
+}
+
+static void
+bna_tx_mod_cb_tx_stopped_all(void *arg)
+{
+	struct bna_tx_mod *tx_mod = (struct bna_tx_mod *)arg;
+
+	if (tx_mod->stop_cbfn)
+		tx_mod->stop_cbfn(&tx_mod->bna->enet);
+	tx_mod->stop_cbfn = NULL;
+}
+
+void
+bna_tx_mod_init(struct bna_tx_mod *tx_mod, struct bna *bna,
+		struct bna_res_info *res_info)
+{
+	int i;
+
+	tx_mod->bna = bna;
+	tx_mod->flags = 0;
+
+	tx_mod->tx = (struct bna_tx *)
+		res_info[BNA_MOD_RES_MEM_T_TX_ARRAY].res_u.mem_info.mdl[0].kva;
+	tx_mod->txq = (struct bna_txq *)
+		res_info[BNA_MOD_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.mdl[0].kva;
+
+	INIT_LIST_HEAD(&tx_mod->tx_free_q);
+	INIT_LIST_HEAD(&tx_mod->tx_active_q);
+
+	INIT_LIST_HEAD(&tx_mod->txq_free_q);
+
+	for (i = 0; i < bna->ioceth.attr.num_txq; i++) {
+		tx_mod->tx[i].rid = i;
+		bfa_q_qe_init(&tx_mod->tx[i].qe);
+		list_add_tail(&tx_mod->tx[i].qe, &tx_mod->tx_free_q);
+		bfa_q_qe_init(&tx_mod->txq[i].qe);
+		list_add_tail(&tx_mod->txq[i].qe, &tx_mod->txq_free_q);
+	}
+
+	tx_mod->prio_map = BFI_TX_PRIO_MAP_ALL;
+	tx_mod->default_prio = 0;
+	tx_mod->iscsi_over_cee = BNA_STATUS_T_DISABLED;
+	tx_mod->iscsi_prio = -1;
+}
+
+void
+bna_tx_mod_uninit(struct bna_tx_mod *tx_mod)
+{
+	struct list_head		*qe;
+	int i;
+
+	i = 0;
+	list_for_each(qe, &tx_mod->tx_free_q)
+		i++;
+
+	i = 0;
+	list_for_each(qe, &tx_mod->txq_free_q)
+		i++;
+
+	tx_mod->bna = NULL;
+}
+
+void
+bna_tx_mod_start(struct bna_tx_mod *tx_mod, enum bna_tx_type type)
+{
+	struct bna_tx *tx;
+	struct list_head		*qe;
+
+	tx_mod->flags |= BNA_TX_MOD_F_ENET_STARTED;
+	if (type == BNA_TX_T_LOOPBACK)
+		tx_mod->flags |= BNA_TX_MOD_F_ENET_LOOPBACK;
+
+	list_for_each(qe, &tx_mod->tx_active_q) {
+		tx = (struct bna_tx *)qe;
+		if (tx->type == type)
+			bna_tx_start(tx);
+	}
+}
+
+void
+bna_tx_mod_stop(struct bna_tx_mod *tx_mod, enum bna_tx_type type)
+{
+	struct bna_tx *tx;
+	struct list_head		*qe;
+
+	tx_mod->flags &= ~BNA_TX_MOD_F_ENET_STARTED;
+	tx_mod->flags &= ~BNA_TX_MOD_F_ENET_LOOPBACK;
+
+	tx_mod->stop_cbfn = bna_enet_cb_tx_stopped;
+
+	bfa_wc_init(&tx_mod->tx_stop_wc, bna_tx_mod_cb_tx_stopped_all, tx_mod);
+
+	list_for_each(qe, &tx_mod->tx_active_q) {
+		tx = (struct bna_tx *)qe;
+		if (tx->type == type) {
+			bfa_wc_up(&tx_mod->tx_stop_wc);
+			bna_tx_stop(tx);
+		}
+	}
+
+	bfa_wc_wait(&tx_mod->tx_stop_wc);
+}
+
+void
+bna_tx_mod_fail(struct bna_tx_mod *tx_mod)
+{
+	struct bna_tx *tx;
+	struct list_head		*qe;
+
+	tx_mod->flags &= ~BNA_TX_MOD_F_ENET_STARTED;
+	tx_mod->flags &= ~BNA_TX_MOD_F_ENET_LOOPBACK;
+
+	list_for_each(qe, &tx_mod->tx_active_q) {
+		tx = (struct bna_tx *)qe;
+		bna_tx_fail(tx);
+	}
+}
+
+void
+bna_tx_coalescing_timeo_set(struct bna_tx *tx, int coalescing_timeo)
+{
+	struct bna_txq *txq;
+	struct list_head *qe;
+
+	list_for_each(qe, &tx->txq_q) {
+		txq = (struct bna_txq *)qe;
+		bna_ib_coalescing_timeo_set(&txq->ib, coalescing_timeo);
+	}
+}
diff --git a/drivers/net/bna/bna_types.h b/drivers/net/ethernet/brocade/bna/bna_types.h
index 2f89cb235248..8a6da0c3cd89 100644
--- a/drivers/net/bna/bna_types.h
+++ b/drivers/net/ethernet/brocade/bna/bna_types.h
@@ -19,8 +19,10 @@
 #define __BNA_TYPES_H__
 
 #include "cna.h"
-#include "bna_hw.h"
+#include "bna_hw_defs.h"
 #include "bfa_cee.h"
+#include "bfi_enet.h"
+#include "bfa_msgq.h"
 
 /**
  *
@@ -28,13 +30,14 @@
  *
  */
 
+struct bna_mcam_handle;
 struct bna_txq;
 struct bna_tx;
 struct bna_rxq;
 struct bna_cq;
 struct bna_rx;
 struct bna_rxf;
-struct bna_port;
+struct bna_enet;
 struct bna;
 struct bnad;
 
@@ -86,31 +89,29 @@ enum bna_res_req_type {
 	BNA_RES_MEM_T_ATTR		= 1,
 	BNA_RES_MEM_T_FWTRC		= 2,
 	BNA_RES_MEM_T_STATS		= 3,
-	BNA_RES_MEM_T_SWSTATS		= 4,
-	BNA_RES_MEM_T_IBIDX		= 5,
-	BNA_RES_MEM_T_IB_ARRAY		= 6,
-	BNA_RES_MEM_T_INTR_ARRAY	= 7,
-	BNA_RES_MEM_T_IDXSEG_ARRAY	= 8,
-	BNA_RES_MEM_T_TX_ARRAY		= 9,
-	BNA_RES_MEM_T_TXQ_ARRAY		= 10,
-	BNA_RES_MEM_T_RX_ARRAY		= 11,
-	BNA_RES_MEM_T_RXP_ARRAY		= 12,
-	BNA_RES_MEM_T_RXQ_ARRAY		= 13,
-	BNA_RES_MEM_T_UCMAC_ARRAY	= 14,
-	BNA_RES_MEM_T_MCMAC_ARRAY	= 15,
-	BNA_RES_MEM_T_RIT_ENTRY		= 16,
-	BNA_RES_MEM_T_RIT_SEGMENT	= 17,
-	BNA_RES_INTR_T_MBOX		= 18,
 	BNA_RES_T_MAX
 };
 
+enum bna_mod_res_req_type {
+	BNA_MOD_RES_MEM_T_TX_ARRAY	= 0,
+	BNA_MOD_RES_MEM_T_TXQ_ARRAY	= 1,
+	BNA_MOD_RES_MEM_T_RX_ARRAY	= 2,
+	BNA_MOD_RES_MEM_T_RXP_ARRAY	= 3,
+	BNA_MOD_RES_MEM_T_RXQ_ARRAY	= 4,
+	BNA_MOD_RES_MEM_T_UCMAC_ARRAY	= 5,
+	BNA_MOD_RES_MEM_T_MCMAC_ARRAY	= 6,
+	BNA_MOD_RES_MEM_T_MCHANDLE_ARRAY = 7,
+	BNA_MOD_RES_T_MAX
+};
+
 enum bna_tx_res_req_type {
 	BNA_TX_RES_MEM_T_TCB	= 0,
 	BNA_TX_RES_MEM_T_UNMAPQ	= 1,
 	BNA_TX_RES_MEM_T_QPT	= 2,
 	BNA_TX_RES_MEM_T_SWQPT	= 3,
 	BNA_TX_RES_MEM_T_PAGE	= 4,
-	BNA_TX_RES_INTR_T_TXCMPL = 5,
+	BNA_TX_RES_MEM_T_IBIDX	= 5,
+	BNA_TX_RES_INTR_T_TXCMPL = 6,
 	BNA_TX_RES_T_MAX,
 };
 
@@ -127,13 +128,10 @@ enum bna_rx_mem_type {
 	BNA_RX_RES_MEM_T_DSWQPT		= 9,	/* RX s/w QPT */
 	BNA_RX_RES_MEM_T_DPAGE		= 10,	/* RX s/w QPT */
 	BNA_RX_RES_MEM_T_HPAGE		= 11,	/* RX s/w QPT */
-	BNA_RX_RES_T_INTR		= 12,	/* Rx interrupts */
-	BNA_RX_RES_T_MAX		= 13
-};
-
-enum bna_mbox_state {
-	BNA_MBOX_FREE		= 0,
-	BNA_MBOX_POSTED		= 1
+	BNA_RX_RES_MEM_T_IBIDX		= 12,
+	BNA_RX_RES_MEM_T_RIT		= 13,
+	BNA_RX_RES_T_INTR		= 14,	/* Rx interrupts */
+	BNA_RX_RES_T_MAX		= 15
 };
 
 enum bna_tx_type {
@@ -142,14 +140,15 @@ enum bna_tx_type {
 };
 
 enum bna_tx_flags {
-	BNA_TX_F_PORT_STARTED	= 1,
+	BNA_TX_F_ENET_STARTED	= 1,
 	BNA_TX_F_ENABLED	= 2,
-	BNA_TX_F_PRIO_LOCK	= 4,
+	BNA_TX_F_PRIO_CHANGED	= 4,
+	BNA_TX_F_BW_UPDATED	= 8,
 };
 
 enum bna_tx_mod_flags {
-	BNA_TX_MOD_F_PORT_STARTED	= 1,
-	BNA_TX_MOD_F_PORT_LOOPBACK	= 2,
+	BNA_TX_MOD_F_ENET_STARTED	= 1,
+	BNA_TX_MOD_F_ENET_LOOPBACK	= 2,
 };
 
 enum bna_rx_type {
@@ -165,80 +164,49 @@ enum bna_rxp_type {
 
 enum bna_rxmode {
 	BNA_RXMODE_PROMISC	= 1,
-	BNA_RXMODE_ALLMULTI	= 2
+	BNA_RXMODE_DEFAULT	= 2,
+	BNA_RXMODE_ALLMULTI	= 4
 };
 
 enum bna_rx_event {
 	RX_E_START			= 1,
 	RX_E_STOP			= 2,
 	RX_E_FAIL			= 3,
-	RX_E_RXF_STARTED		= 4,
-	RX_E_RXF_STOPPED		= 5,
-	RX_E_RXQ_STOPPED		= 6,
-};
-
-enum bna_rx_state {
-	BNA_RX_STOPPED			= 1,
-	BNA_RX_RXF_START_WAIT		= 2,
-	BNA_RX_STARTED			= 3,
-	BNA_RX_RXF_STOP_WAIT		= 4,
-	BNA_RX_RXQ_STOP_WAIT		= 5,
+	RX_E_STARTED			= 4,
+	RX_E_STOPPED			= 5,
+	RX_E_RXF_STARTED		= 6,
+	RX_E_RXF_STOPPED		= 7,
+	RX_E_CLEANUP_DONE		= 8,
 };
 
 enum bna_rx_flags {
-	BNA_RX_F_ENABLE		= 0x01,		/* bnad enabled rxf */
-	BNA_RX_F_PORT_ENABLED	= 0x02,		/* Port object is enabled */
-	BNA_RX_F_PORT_FAILED	= 0x04,		/* Port in failed state */
+	BNA_RX_F_ENET_STARTED	= 1,
+	BNA_RX_F_ENABLED	= 2,
 };
 
 enum bna_rx_mod_flags {
-	BNA_RX_MOD_F_PORT_STARTED	= 1,
-	BNA_RX_MOD_F_PORT_LOOPBACK	= 2,
-};
-
-enum bna_rxf_oper_state {
-	BNA_RXF_OPER_STATE_RUNNING	= 0x01, /* rxf operational */
-	BNA_RXF_OPER_STATE_PAUSED	= 0x02,	/* rxf in PAUSED state */
+	BNA_RX_MOD_F_ENET_STARTED	= 1,
+	BNA_RX_MOD_F_ENET_LOOPBACK	= 2,
 };
 
 enum bna_rxf_flags {
-	BNA_RXF_FL_STOP_PENDING		= 0x01,
-	BNA_RXF_FL_FAILED		= 0x02,
-	BNA_RXF_FL_RSS_CONFIG_PENDING	= 0x04,
-	BNA_RXF_FL_OPERSTATE_CHANGED	= 0x08,
-	BNA_RXF_FL_RXF_ENABLED		= 0x10,
-	BNA_RXF_FL_VLAN_CONFIG_PENDING	= 0x20,
+	BNA_RXF_F_PAUSED		= 1,
 };
 
 enum bna_rxf_event {
 	RXF_E_START			= 1,
 	RXF_E_STOP			= 2,
 	RXF_E_FAIL			= 3,
-	RXF_E_CAM_FLTR_MOD		= 4,
-	RXF_E_STARTED			= 5,
-	RXF_E_STOPPED			= 6,
-	RXF_E_CAM_FLTR_RESP		= 7,
-	RXF_E_PAUSE			= 8,
-	RXF_E_RESUME			= 9,
-	RXF_E_STAT_CLEARED		= 10,
-};
-
-enum bna_rxf_state {
-	BNA_RXF_STOPPED			= 1,
-	BNA_RXF_START_WAIT		= 2,
-	BNA_RXF_CAM_FLTR_MOD_WAIT	= 3,
-	BNA_RXF_STARTED			= 4,
-	BNA_RXF_CAM_FLTR_CLR_WAIT	= 5,
-	BNA_RXF_STOP_WAIT		= 6,
-	BNA_RXF_PAUSE_WAIT		= 7,
-	BNA_RXF_RESUME_WAIT		= 8,
-	BNA_RXF_STAT_CLR_WAIT		= 9,
+	RXF_E_CONFIG			= 4,
+	RXF_E_PAUSE			= 5,
+	RXF_E_RESUME			= 6,
+	RXF_E_FW_RESP			= 7,
 };
 
-enum bna_port_type {
-	BNA_PORT_T_REGULAR		= 0,
-	BNA_PORT_T_LOOPBACK_INTERNAL	= 1,
-	BNA_PORT_T_LOOPBACK_EXTERNAL	= 2,
+enum bna_enet_type {
+	BNA_ENET_T_REGULAR		= 0,
+	BNA_ENET_T_LOOPBACK_INTERNAL	= 1,
+	BNA_ENET_T_LOOPBACK_EXTERNAL	= 2,
 };
 
 enum bna_link_status {
@@ -247,17 +215,27 @@ enum bna_link_status {
 	BNA_CEE_UP		= 2
 };
 
-enum bna_llport_flags {
-	BNA_LLPORT_F_ADMIN_UP		= 1,
-	BNA_LLPORT_F_PORT_ENABLED	= 2,
-	BNA_LLPORT_F_RX_STARTED		= 4
+enum bna_ethport_flags {
+	BNA_ETHPORT_F_ADMIN_UP		= 1,
+	BNA_ETHPORT_F_PORT_ENABLED	= 2,
+	BNA_ETHPORT_F_RX_STARTED	= 4,
 };
 
-enum bna_port_flags {
-	BNA_PORT_F_DEVICE_READY	= 1,
-	BNA_PORT_F_ENABLED	= 2,
-	BNA_PORT_F_PAUSE_CHANGED = 4,
-	BNA_PORT_F_MTU_CHANGED	= 8
+enum bna_enet_flags {
+	BNA_ENET_F_IOCETH_READY		= 1,
+	BNA_ENET_F_ENABLED		= 2,
+	BNA_ENET_F_PAUSE_CHANGED	= 4,
+	BNA_ENET_F_MTU_CHANGED		= 8
+};
+
+enum bna_rss_flags {
+	BNA_RSS_F_RIT_PENDING		= 1,
+	BNA_RSS_F_CFG_PENDING		= 2,
+	BNA_RSS_F_STATUS_PENDING	= 4,
+};
+
+enum bna_mod_flags {
+	BNA_MOD_F_INIT_DONE		= 1,
 };
 
 enum bna_pkt_rates {
@@ -289,10 +267,17 @@ enum bna_dim_bias_types {
 	BNA_BIAS_T_MAX			= 2
 };
 
+#define BNA_MAX_NAME_SIZE	64
+struct bna_ident {
+	int			id;
+	char			name[BNA_MAX_NAME_SIZE];
+};
+
 struct bna_mac {
 	/* This should be the first one */
 	struct list_head			qe;
 	u8			addr[ETH_ALEN];
+	struct bna_mcam_handle *handle;
 };
 
 struct bna_mem_descr {
@@ -338,23 +323,29 @@ struct bna_qpt {
 	u32		page_size;
 };
 
+struct bna_attr {
+	int			num_txq;
+	int			num_rxp;
+	int			num_ucmac;
+	int			num_mcmac;
+	int			max_rit_size;
+};
+
 /**
  *
- * Device
+ * IOCEth
  *
  */
 
-struct bna_device {
+struct bna_ioceth {
 	bfa_fsm_t		fsm;
 	struct bfa_ioc ioc;
 
-	enum bna_intr_type intr_type;
-	int			vector;
+	struct bna_attr attr;
+	struct bfa_msgq_cmd_entry msgq_cmd;
+	struct bfi_enet_attr_req attr_req;
 
-	void (*ready_cbfn)(struct bnad *bnad, enum bna_cb_status status);
-	struct bnad *ready_cbarg;
-
-	void (*stop_cbfn)(struct bnad *bnad, enum bna_cb_status status);
+	void (*stop_cbfn)(struct bnad *bnad);
 	struct bnad *stop_cbarg;
 
 	struct bna *bna;
@@ -362,32 +353,7 @@ struct bna_device {
 
 /**
  *
- * Mail box
- *
- */
-
-struct bna_mbox_qe {
-	/* This should be the first one */
-	struct list_head			qe;
-
-	struct bfa_mbox_cmd cmd;
-	u32		cmd_len;
-	/* Callback for port, tx, rx, rxf */
-	void (*cbfn)(void *arg, int status);
-	void			*cbarg;
-};
-
-struct bna_mbox_mod {
-	enum bna_mbox_state state;
-	struct list_head			posted_q;
-	u32		msg_pending;
-	u32		msg_ctr;
-	struct bna *bna;
-};
-
-/**
- *
- * Port
+ * Enet
  *
  */
 
@@ -397,50 +363,58 @@ struct bna_pause_config {
 	enum bna_status rx_pause;
 };
 
-struct bna_llport {
+struct bna_enet {
 	bfa_fsm_t		fsm;
-	enum bna_llport_flags flags;
+	enum bna_enet_flags flags;
 
-	enum bna_port_type type;
+	enum bna_enet_type type;
 
-	enum bna_link_status link_status;
+	struct bna_pause_config pause_config;
+	int			mtu;
 
-	int			rx_started_count;
+	/* Callback for bna_enet_disable(), enet_stop() */
+	void (*stop_cbfn)(void *);
+	void			*stop_cbarg;
+
+	/* Callback for bna_enet_pause_config() */
+	void (*pause_cbfn)(struct bnad *);
+
+	/* Callback for bna_enet_mtu_set() */
+	void (*mtu_cbfn)(struct bnad *);
 
-	void (*stop_cbfn)(struct bna_port *, enum bna_cb_status);
+	struct bfa_wc		chld_stop_wc;
 
-	struct bna_mbox_qe mbox_qe;
+	struct bfa_msgq_cmd_entry msgq_cmd;
+	struct bfi_enet_set_pause_req pause_req;
 
 	struct bna *bna;
 };
 
-struct bna_port {
-	bfa_fsm_t		fsm;
-	enum bna_port_flags flags;
-
-	enum bna_port_type type;
+/**
+ *
+ * Ethport
+ *
+ */
 
-	struct bna_llport llport;
+struct bna_ethport {
+	bfa_fsm_t		fsm;
+	enum bna_ethport_flags flags;
 
-	struct bna_pause_config pause_config;
-	u8			priority;
-	int			mtu;
+	enum bna_link_status link_status;
 
-	/* Callback for bna_port_disable(), port_stop() */
-	void (*stop_cbfn)(void *, enum bna_cb_status);
-	void			*stop_cbarg;
+	int			rx_started_count;
 
-	/* Callback for bna_port_pause_config() */
-	void (*pause_cbfn)(struct bnad *, enum bna_cb_status);
+	void (*stop_cbfn)(struct bna_enet *);
 
-	/* Callback for bna_port_mtu_set() */
-	void (*mtu_cbfn)(struct bnad *, enum bna_cb_status);
+	void (*adminup_cbfn)(struct bnad *, enum bna_cb_status);
 
 	void (*link_cbfn)(struct bnad *, enum bna_link_status);
 
-	struct bfa_wc		chld_stop_wc;
-
-	struct bna_mbox_qe mbox_qe;
+	struct bfa_msgq_cmd_entry msgq_cmd;
+	union {
+		struct bfi_enet_enable_req admin_req;
+		struct bfi_enet_diag_lb_req lpbk_req;
+	} bfi_enet_cmd;
 
 	struct bna *bna;
 };
@@ -451,82 +425,26 @@ struct bna_port {
  *
  */
 
-/* IB index segment structure */
-struct bna_ibidx_seg {
-	/* This should be the first one */
-	struct list_head			qe;
-
-	u8			ib_seg_size;
-	u8			ib_idx_tbl_offset;
-};
-
-/* Interrupt structure */
-struct bna_intr {
-	/* This should be the first one */
-	struct list_head			qe;
-	int			ref_count;
-
-	enum bna_intr_type intr_type;
-	int			vector;
-
-	struct bna_ib *ib;
-};
-
 /* Doorbell structure */
 struct bna_ib_dbell {
 	void *__iomem doorbell_addr;
 	u32		doorbell_ack;
 };
 
-/* Interrupt timer configuration */
-struct bna_ib_config {
-	u8		coalescing_timeo;    /* Unit is 5usec. */
-
-	int			interpkt_count;
-	int			interpkt_timeo;
-
-	enum ib_flags ctrl_flags;
-};
-
 /* IB structure */
 struct bna_ib {
-	/* This should be the first one */
-	struct list_head			qe;
-
-	int			ib_id;
-
-	int			ref_count;
-	int			start_count;
-
 	struct bna_dma_addr ib_seg_host_addr;
 	void		*ib_seg_host_addr_kva;
-	u32		idx_mask; /* Size >= BNA_IBIDX_MAX_SEGSIZE */
-
-	struct bna_ibidx_seg *idx_seg;
 
 	struct bna_ib_dbell door_bell;
 
-	struct bna_intr *intr;
-
-	struct bna_ib_config ib_config;
-
-	struct bna *bna;
-};
-
-/* IB module - keeps track of IBs and interrupts */
-struct bna_ib_mod {
-	struct bna_ib *ib;		/* BFI_MAX_IB entries */
-	struct bna_intr *intr;		/* BFI_MAX_IB entries */
-	struct bna_ibidx_seg *idx_seg;	/* BNA_IBIDX_TOTAL_SEGS */
-
-	struct list_head			ib_free_q;
-
-	struct list_head		ibidx_seg_pool[BFI_IBIDX_TOTAL_POOLS];
+	enum bna_intr_type	intr_type;
+	int			intr_vector;
 
-	struct list_head			intr_free_q;
-	struct list_head			intr_active_q;
+	u8			coalescing_timeo;    /* Unit is 5usec. */
 
-	struct bna *bna;
+	int			interpkt_count;
+	int			interpkt_timeo;
 };
 
 /**
@@ -552,6 +470,7 @@ struct bna_tcb {
 	/* Control path */
 	struct bna_txq *txq;
 	struct bnad *bnad;
+	void			*priv; /* BNAD's cookie */
 	enum bna_intr_type intr_type;
 	int			intr_vector;
 	u8			priority; /* Current priority */
@@ -565,68 +484,66 @@ struct bna_txq {
 	/* This should be the first one */
 	struct list_head			qe;
 
-	int			txq_id;
-
 	u8			priority;
 
 	struct bna_qpt qpt;
 	struct bna_tcb *tcb;
-	struct bna_ib *ib;
-	int			ib_seg_offset;
+	struct bna_ib ib;
 
 	struct bna_tx *tx;
 
+	int			hw_id;
+
 	u64		tx_packets;
 	u64		tx_bytes;
 };
 
-/* TxF structure (hardware Tx Function) */
-struct bna_txf {
-	int			txf_id;
-	enum txf_flags ctrl_flags;
-	u16		vlan;
-};
-
 /* Tx object */
 struct bna_tx {
 	/* This should be the first one */
 	struct list_head			qe;
+	int			rid;
+	int			hw_id;
 
 	bfa_fsm_t		fsm;
 	enum bna_tx_flags flags;
 
 	enum bna_tx_type type;
+	int			num_txq;
 
 	struct list_head			txq_q;
-	struct bna_txf txf;
+	u16			txf_vlan_id;
 
 	/* Tx event handlers */
 	void (*tcb_setup_cbfn)(struct bnad *, struct bna_tcb *);
 	void (*tcb_destroy_cbfn)(struct bnad *, struct bna_tcb *);
-	void (*tx_stall_cbfn)(struct bnad *, struct bna_tcb *);
-	void (*tx_resume_cbfn)(struct bnad *, struct bna_tcb *);
-	void (*tx_cleanup_cbfn)(struct bnad *, struct bna_tcb *);
+	void (*tx_stall_cbfn)(struct bnad *, struct bna_tx *);
+	void (*tx_resume_cbfn)(struct bnad *, struct bna_tx *);
+	void (*tx_cleanup_cbfn)(struct bnad *, struct bna_tx *);
 
 	/* callback for bna_tx_disable(), bna_tx_stop() */
-	void (*stop_cbfn)(void *arg, struct bna_tx *tx,
-				enum bna_cb_status status);
+	void (*stop_cbfn)(void *arg, struct bna_tx *tx);
 	void			*stop_cbarg;
 
 	/* callback for bna_tx_prio_set() */
-	void (*prio_change_cbfn)(struct bnad *bnad, struct bna_tx *tx,
-				enum bna_cb_status status);
-
-	struct bfa_wc		txq_stop_wc;
+	void (*prio_change_cbfn)(struct bnad *bnad, struct bna_tx *tx);
 
-	struct bna_mbox_qe mbox_qe;
+	struct bfa_msgq_cmd_entry msgq_cmd;
+	union {
+		struct bfi_enet_tx_cfg_req	cfg_req;
+		struct bfi_enet_req		req;
+		struct bfi_enet_tx_cfg_rsp	cfg_rsp;
+	} bfi_enet_cmd;
 
 	struct bna *bna;
 	void			*priv;	/* bnad's cookie */
 };
 
+/* Tx object configuration used during creation */
 struct bna_tx_config {
 	int			num_txq;
 	int			txq_depth;
+	int			coalescing_timeo;
 	enum bna_tx_type tx_type;
 };
 
@@ -635,9 +552,9 @@ struct bna_tx_event_cbfn {
 	void (*tcb_setup_cbfn)(struct bnad *, struct bna_tcb *);
 	void (*tcb_destroy_cbfn)(struct bnad *, struct bna_tcb *);
 	/* Mandatory */
-	void (*tx_stall_cbfn)(struct bnad *, struct bna_tcb *);
-	void (*tx_resume_cbfn)(struct bnad *, struct bna_tcb *);
-	void (*tx_cleanup_cbfn)(struct bnad *, struct bna_tcb *);
+	void (*tx_stall_cbfn)(struct bnad *, struct bna_tx *);
+	void (*tx_resume_cbfn)(struct bnad *, struct bna_tx *);
+	void (*tx_cleanup_cbfn)(struct bnad *, struct bna_tx *);
 };
 
 /* Tx module - keeps track of free, active tx objects */
@@ -651,57 +568,25 @@ struct bna_tx_mod {
 	struct list_head			txq_free_q;
 
 	/* callback for bna_tx_mod_stop() */
-	void (*stop_cbfn)(struct bna_port *port,
-				enum bna_cb_status status);
+	void (*stop_cbfn)(struct bna_enet *enet);
 
 	struct bfa_wc		tx_stop_wc;
 
 	enum bna_tx_mod_flags flags;
 
-	int			priority;
-	int			cee_link;
+	u8			prio_map;
+	int			default_prio;
+	int			iscsi_over_cee;
+	int			iscsi_prio;
+	int			prio_reconfigured;
 
-	u32		txf_bmap[2];
+	u32			rid_mask;
 
 	struct bna *bna;
 };
 
 /**
  *
- * Receive Indirection Table
- *
- */
-
-/* One row of RIT table */
-struct bna_rit_entry {
-	u8 large_rxq_id;	/* used for either large or data buffers */
-	u8 small_rxq_id;	/* used for either small or header buffers */
-};
-
-/* RIT segment */
-struct bna_rit_segment {
-	struct list_head			qe;
-
-	u32		rit_offset;
-	u32		rit_size;
-	/**
-	 * max_rit_size: Varies per RIT segment depending on how RIT is
-	 * partitioned
-	 */
-	u32		max_rit_size;
-
-	struct bna_rit_entry *rit;
-};
-
-struct bna_rit_mod {
-	struct bna_rit_entry *rit;
-	struct bna_rit_segment *rit_segment;
-
-	struct list_head		rit_seg_pool[BFI_RIT_SEG_TOTAL_POOLS];
-};
-
-/**
- *
  * Rx object
  *
  */
@@ -719,8 +604,9 @@ struct bna_rcb {
 	int			page_count;
 	/* Control path */
 	struct bna_rxq *rxq;
-	struct bna_cq *cq;
+	struct bna_ccb *ccb;
 	struct bnad *bnad;
+	void			*priv; /* BNAD's cookie */
 	unsigned long		flags;
 	int			id;
 };
@@ -728,7 +614,6 @@ struct bna_rcb {
 /* RxQ structure - QPT, configuration */
 struct bna_rxq {
 	struct list_head			qe;
-	int			rxq_id;
 
 	int			buffer_size;
 	int			q_depth;
@@ -739,6 +624,8 @@ struct bna_rxq {
 	struct bna_rxp *rxp;
 	struct bna_rx *rx;
 
+	int			hw_id;
+
 	u64		rx_packets;
 	u64		rx_bytes;
 	u64		rx_packets_with_error;
@@ -784,6 +671,7 @@ struct bna_ccb {
 	/* Control path */
 	struct bna_cq *cq;
 	struct bnad *bnad;
+	void			*priv; /* BNAD's cookie */
 	enum bna_intr_type intr_type;
 	int			intr_vector;
 	u8			rx_coalescing_timeo; /* For NAPI */
@@ -793,46 +681,43 @@ struct bna_ccb {
 
 /* CQ QPT, configuration  */
 struct bna_cq {
-	int			cq_id;
-
 	struct bna_qpt qpt;
 	struct bna_ccb *ccb;
 
-	struct bna_ib *ib;
-	u8			ib_seg_offset;
+	struct bna_ib ib;
 
 	struct bna_rx *rx;
 };
 
 struct bna_rss_config {
-	enum rss_hash_type hash_type;
+	enum bfi_enet_rss_type	hash_type;
 	u8			hash_mask;
-	u32		toeplitz_hash_key[BFI_RSS_HASH_KEY_LEN];
+	u32		toeplitz_hash_key[BFI_ENET_RSS_KEY_LEN];
 };
 
 struct bna_hds_config {
-	enum hds_header_type hdr_type;
-	int			header_size;
+	enum bfi_enet_hds_type	hdr_type;
+	int			forced_offset;
 };
 
-/* This structure is used during RX creation */
+/* Rx object configuration used during creation */
 struct bna_rx_config {
 	enum bna_rx_type rx_type;
 	int			num_paths;
 	enum bna_rxp_type rxp_type;
 	int			paused;
 	int			q_depth;
+	int			coalescing_timeo;
 	/*
 	 * Small/Large (or Header/Data) buffer size to be configured
 	 * for SLR and HDS queue type. Large buffer size comes from
-	 * port->mtu.
+	 * enet->mtu.
 	 */
 	int			small_buff_size;
 
 	enum bna_status rss_status;
 	struct bna_rss_config rss_config;
 
-	enum bna_status hds_status;
 	struct bna_hds_config hds_config;
 
 	enum bna_status vlan_strip_status;
@@ -851,51 +736,35 @@ struct bna_rxp {
 
 	/* MSI-x vector number for configuring RSS */
 	int			vector;
-
-	struct bna_mbox_qe mbox_qe;
-};
-
-/* HDS configuration structure */
-struct bna_rxf_hds {
-	enum hds_header_type hdr_type;
-	int			header_size;
-};
-
-/* RSS configuration structure */
-struct bna_rxf_rss {
-	enum rss_hash_type hash_type;
-	u8			hash_mask;
-	u32		toeplitz_hash_key[BFI_RSS_HASH_KEY_LEN];
+	int			hw_id;
 };
 
 /* RxF structure (hardware Rx Function) */
 struct bna_rxf {
 	bfa_fsm_t		fsm;
-	int			rxf_id;
-	enum rxf_flags ctrl_flags;
-	u16		default_vlan_tag;
-	enum bna_rxf_oper_state rxf_oper_state;
-	enum bna_status hds_status;
-	struct bna_rxf_hds hds_cfg;
-	enum bna_status rss_status;
-	struct bna_rxf_rss rss_cfg;
-	struct bna_rit_segment *rit_segment;
-	struct bna_rx *rx;
-	u32		forced_offset;
-	struct bna_mbox_qe mbox_qe;
-	int			mcast_rxq_id;
+	enum bna_rxf_flags flags;
+
+	struct bfa_msgq_cmd_entry msgq_cmd;
+	union {
+		struct bfi_enet_enable_req req;
+		struct bfi_enet_rss_cfg_req rss_req;
+		struct bfi_enet_rit_req rit_req;
+		struct bfi_enet_rx_vlan_req vlan_req;
+		struct bfi_enet_mcast_add_req mcast_add_req;
+		struct bfi_enet_mcast_del_req mcast_del_req;
+		struct bfi_enet_ucast_req ucast_req;
+	} bfi_enet_cmd;
 
 	/* callback for bna_rxf_start() */
-	void (*start_cbfn) (struct bna_rx *rx, enum bna_cb_status status);
+	void (*start_cbfn) (struct bna_rx *rx);
 	struct bna_rx *start_cbarg;
 
 	/* callback for bna_rxf_stop() */
-	void (*stop_cbfn) (struct bna_rx *rx, enum bna_cb_status status);
+	void (*stop_cbfn) (struct bna_rx *rx);
 	struct bna_rx *stop_cbarg;
 
-	/* callback for bna_rxf_receive_enable() / bna_rxf_receive_disable() */
-	void (*oper_state_cbfn) (struct bnad *bnad, struct bna_rx *rx,
-			enum bna_cb_status status);
+	/* callback for bna_rx_receive_pause() / bna_rx_receive_resume() */
+	void (*oper_state_cbfn) (struct bnad *bnad, struct bna_rx *rx);
 	struct bnad *oper_state_cbarg;
 
 	/**
@@ -905,25 +774,25 @@ struct bna_rxf {
 	 *	bna_rxf_{ucast/mcast}_del(),
 	 *	bna_rxf_mode_set()
 	 */
-	void (*cam_fltr_cbfn)(struct bnad *bnad, struct bna_rx *rx,
-				enum bna_cb_status status);
+	void (*cam_fltr_cbfn)(struct bnad *bnad, struct bna_rx *rx);
 	struct bnad *cam_fltr_cbarg;
 
-	enum bna_rxf_flags rxf_flags;
-
 	/* List of unicast addresses yet to be applied to h/w */
 	struct list_head			ucast_pending_add_q;
 	struct list_head			ucast_pending_del_q;
+	struct bna_mac *ucast_pending_mac;
 	int			ucast_pending_set;
 	/* ucast addresses applied to the h/w */
 	struct list_head			ucast_active_q;
-	struct bna_mac *ucast_active_mac;
+	struct bna_mac ucast_active_mac;
+	int			ucast_active_set;
 
 	/* List of multicast addresses yet to be applied to h/w */
 	struct list_head			mcast_pending_add_q;
 	struct list_head			mcast_pending_del_q;
 	/* multicast addresses applied to the h/w */
 	struct list_head			mcast_active_q;
+	struct list_head			mcast_handle_q;
 
 	/* Rx modes yet to be applied to h/w */
 	enum bna_rxmode rxmode_pending;
@@ -931,41 +800,58 @@ struct bna_rxf {
 	/* Rx modes applied to h/w */
 	enum bna_rxmode rxmode_active;
 
+	u8			vlan_pending_bitmask;
 	enum bna_status vlan_filter_status;
-	u32		vlan_filter_table[(BFI_MAX_VLAN + 1) / 32];
+	u32	vlan_filter_table[(BFI_ENET_VLAN_ID_MAX) / 32];
+	bool			vlan_strip_pending;
+	enum bna_status		vlan_strip_status;
+
+	enum bna_rss_flags	rss_pending;
+	enum bna_status		rss_status;
+	struct bna_rss_config	rss_cfg;
+	u8			*rit;
+	int			rit_size;
+
+	struct bna_rx		*rx;
 };
 
 /* Rx object */
 struct bna_rx {
 	/* This should be the first one */
 	struct list_head			qe;
+	int			rid;
+	int			hw_id;
 
 	bfa_fsm_t		fsm;
 
 	enum bna_rx_type type;
 
-	/* list-head for RX path objects */
+	int			num_paths;
 	struct list_head			rxp_q;
 
+	struct bna_hds_config	hds_cfg;
+
 	struct bna_rxf rxf;
 
 	enum bna_rx_flags rx_flags;
 
-	struct bna_mbox_qe mbox_qe;
-
-	struct bfa_wc		rxq_stop_wc;
+	struct bfa_msgq_cmd_entry msgq_cmd;
+	union {
+		struct bfi_enet_rx_cfg_req	cfg_req;
+		struct bfi_enet_req		req;
+		struct bfi_enet_rx_cfg_rsp	cfg_rsp;
+	} bfi_enet_cmd;
 
 	/* Rx event handlers */
 	void (*rcb_setup_cbfn)(struct bnad *, struct bna_rcb *);
 	void (*rcb_destroy_cbfn)(struct bnad *, struct bna_rcb *);
 	void (*ccb_setup_cbfn)(struct bnad *, struct bna_ccb *);
 	void (*ccb_destroy_cbfn)(struct bnad *, struct bna_ccb *);
-	void (*rx_cleanup_cbfn)(struct bnad *, struct bna_ccb *);
-	void (*rx_post_cbfn)(struct bnad *, struct bna_rcb *);
+	void (*rx_cleanup_cbfn)(struct bnad *, struct bna_rx *);
+	void (*rx_post_cbfn)(struct bnad *, struct bna_rx *);
 
 	/* callback for bna_rx_disable(), bna_rx_stop() */
-	void (*stop_cbfn)(void *arg, struct bna_rx *rx,
-				enum bna_cb_status status);
+	void (*stop_cbfn)(void *arg, struct bna_rx *rx);
 	void			*stop_cbarg;
 
 	struct bna *bna;
@@ -979,8 +865,8 @@ struct bna_rx_event_cbfn {
 	void (*ccb_setup_cbfn)(struct bnad *, struct bna_ccb *);
 	void (*ccb_destroy_cbfn)(struct bnad *, struct bna_ccb *);
 	/* Mandatory */
-	void (*rx_cleanup_cbfn)(struct bnad *, struct bna_ccb *);
-	void (*rx_post_cbfn)(struct bnad *, struct bna_rcb *);
+	void (*rx_cleanup_cbfn)(struct bnad *, struct bna_rx *);
+	void (*rx_post_cbfn)(struct bnad *, struct bna_rx *);
 };
 
 /* Rx module - keeps track of free, active rx objects */
@@ -1003,12 +889,11 @@ struct bna_rx_mod {
 	enum bna_rx_mod_flags flags;
 
 	/* callback for bna_rx_mod_stop() */
-	void (*stop_cbfn)(struct bna_port *port,
-				enum bna_cb_status status);
+	void (*stop_cbfn)(struct bna_enet *enet);
 
 	struct bfa_wc		rx_stop_wc;
 	u32		dim_vector[BNA_LOAD_T_MAX][BNA_BIAS_T_MAX];
-	u32		rxf_bmap[2];
+	u32		rid_mask;
 };
 
 /**
@@ -1024,9 +909,18 @@ struct bna_ucam_mod {
 	struct bna *bna;
 };
 
+struct bna_mcam_handle {
+	/* This should be the first one */
+	struct list_head			qe;
+	int			handle;
+	int			refcnt;
+};
+
 struct bna_mcam_mod {
 	struct bna_mac *mcmac;		/* BFI_MAX_MCMAC entries */
+	struct bna_mcam_handle *mchandle;	/* BFI_MAX_MCMAC entries */
 	struct list_head			free_q;
+	struct list_head			free_handle_q;
 
 	struct bna *bna;
 };
@@ -1037,50 +931,20 @@ struct bna_mcam_mod {
  *
  */
 
-struct bna_tx_stats {
-	int			tx_state;
-	int			tx_flags;
-	int			num_txqs;
-	u32		txq_bmap[2];
-	int			txf_id;
-};
-
-struct bna_rx_stats {
-	int			rx_state;
-	int			rx_flags;
-	int			num_rxps;
-	int			num_rxqs;
-	u32		rxq_bmap[2];
-	u32		cq_bmap[2];
-	int			rxf_id;
-	int			rxf_state;
-	int			rxf_oper_state;
-	int			num_active_ucast;
-	int			num_active_mcast;
-	int			rxmode_active;
-	int			vlan_filter_status;
-	u32		vlan_filter_table[(BFI_MAX_VLAN + 1) / 32];
-	int			rss_status;
-	int			hds_status;
-};
-
-struct bna_sw_stats {
-	int			device_state;
-	int			port_state;
-	int			port_flags;
-	int			llport_state;
-	int			priority;
-	int			num_active_tx;
-	int			num_active_rx;
-	struct bna_tx_stats tx_stats[BFI_MAX_TXQ];
-	struct bna_rx_stats rx_stats[BFI_MAX_RXQ];
+struct bna_stats {
+	struct bna_dma_addr	hw_stats_dma;
+	struct bfi_enet_stats	*hw_stats_kva;
+	struct bfi_enet_stats	hw_stats;
 };
 
-struct bna_stats {
-	u32		txf_bmap[2];
-	u32		rxf_bmap[2];
-	struct bfi_ll_stats	*hw_stats;
-	struct bna_sw_stats *sw_stats;
+struct bna_stats_mod {
+	bool		ioc_ready;
+	bool		stats_get_busy;
+	bool		stats_clr_busy;
+	struct bfa_msgq_cmd_entry stats_get_cmd;
+	struct bfa_msgq_cmd_entry stats_clr_cmd;
+	struct bfi_enet_stats_req stats_get;
+	struct bfi_enet_stats_req stats_clr;
 };
 
 /**
@@ -1090,38 +954,32 @@ struct bna_stats {
  */
 
 struct bna {
+	struct bna_ident ident;
 	struct bfa_pcidev pcidev;
 
-	int			port_num;
-
-	struct bna_chip_regs regs;
+	struct bna_reg regs;
+	struct bna_bit_defn bits;
 
-	struct bna_dma_addr hw_stats_dma;
 	struct bna_stats stats;
 
-	struct bna_device device;
+	struct bna_ioceth ioceth;
 	struct bfa_cee cee;
+	struct bfa_msgq msgq;
 
-	struct bna_mbox_mod mbox_mod;
-
-	struct bna_port port;
+	struct bna_ethport ethport;
+	struct bna_enet enet;
+	struct bna_stats_mod stats_mod;
 
 	struct bna_tx_mod tx_mod;
-
 	struct bna_rx_mod rx_mod;
-
-	struct bna_ib_mod ib_mod;
-
 	struct bna_ucam_mod ucam_mod;
 	struct bna_mcam_mod mcam_mod;
 
-	struct bna_rit_mod rit_mod;
+	enum bna_mod_flags mod_flags;
 
-	int			rxf_promisc_id;
-
-	struct bna_mbox_qe mbox_qe;
+	int			default_mode_rid;
+	int			promisc_rid;
 
 	struct bnad *bnad;
 };
-
 #endif	/* __BNA_TYPES_H__ */
diff --git a/drivers/net/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index 8e35b2596f93..6ad4b477a4ef 100644
--- a/drivers/net/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -441,11 +441,15 @@ bnad_poll_cq(struct bnad *bnad, struct bna_ccb *ccb, int budget)
 	struct bnad_skb_unmap *unmap_array;
 	struct sk_buff *skb;
 	u32 flags, unmap_cons;
-	u32 qid0 = ccb->rcb[0]->rxq->rxq_id;
 	struct bna_pkt_rate *pkt_rt = &ccb->pkt_rate;
+	struct bnad_rx_ctrl *rx_ctrl = (struct bnad_rx_ctrl *)(ccb->ctrl);
+
+	set_bit(BNAD_FP_IN_RX_PATH, &rx_ctrl->flags);
 
-	if (!test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags))
+	if (!test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags)) {
+		clear_bit(BNAD_FP_IN_RX_PATH, &rx_ctrl->flags);
 		return 0;
+	}
 
 	prefetch(bnad->netdev);
 	BNA_CQ_QPGE_PTR_GET(ccb->producer_index, ccb->sw_qpt, cmpl,
@@ -455,10 +459,10 @@ bnad_poll_cq(struct bnad *bnad, struct bna_ccb *ccb, int budget)
 		packets++;
 		BNA_UPDATE_PKT_CNT(pkt_rt, ntohs(cmpl->length));
 
-		if (qid0 == cmpl->rxq_id)
-			rcb = ccb->rcb[0];
-		else
+		if (bna_is_small_rxq(cmpl->rxq_id))
 			rcb = ccb->rcb[1];
+		else
+			rcb = ccb->rcb[0];
 
 		unmap_q = rcb->unmap_q;
 		unmap_array = unmap_q->unmap_array;
@@ -518,12 +522,9 @@ bnad_poll_cq(struct bnad *bnad, struct bna_ccb *ccb, int budget)
 		if (flags & BNA_CQ_EF_VLAN)
 			__vlan_hwaccel_put_tag(skb, ntohs(cmpl->vlan_tag));
 
-		if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
-			struct bnad_rx_ctrl *rx_ctrl;
-
-			rx_ctrl = (struct bnad_rx_ctrl *) ccb->ctrl;
+		if (skb->ip_summed == CHECKSUM_UNNECESSARY)
 			napi_gro_receive(&rx_ctrl->napi, skb);
-		} else {
+		else {
 			netif_receive_skb(skb);
 		}
 
@@ -545,6 +546,8 @@ next:
 			bna_ib_ack(ccb->i_dbell, 0);
 	}
 
+	clear_bit(BNAD_FP_IN_RX_PATH, &rx_ctrl->flags);
+
 	return packets;
 }
 
@@ -611,7 +614,7 @@ bnad_msix_mbox_handler(int irq, void *data)
 
 	bna_intr_status_get(&bnad->bna, intr_status);
 
-	if (BNA_IS_MBOX_ERR_INTR(intr_status))
+	if (BNA_IS_MBOX_ERR_INTR(&bnad->bna, intr_status))
 		bna_mbox_handler(&bnad->bna, intr_status);
 
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
@@ -628,6 +631,7 @@ bnad_isr(int irq, void *data)
 	struct bnad *bnad = (struct bnad *)data;
 	struct bnad_rx_info *rx_info;
 	struct bnad_rx_ctrl *rx_ctrl;
+	struct bna_tcb *tcb = NULL;
 
 	if (unlikely(test_bit(BNAD_RF_MBOX_IRQ_DISABLED, &bnad->run_flags)))
 		return IRQ_NONE;
@@ -639,7 +643,7 @@ bnad_isr(int irq, void *data)
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 
-	if (BNA_IS_MBOX_ERR_INTR(intr_status))
+	if (BNA_IS_MBOX_ERR_INTR(&bnad->bna, intr_status))
 		bna_mbox_handler(&bnad->bna, intr_status);
 
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
@@ -650,8 +654,11 @@ bnad_isr(int irq, void *data)
 	/* Process data interrupts */
 	/* Tx processing */
 	for (i = 0; i < bnad->num_tx; i++) {
-		for (j = 0; j < bnad->num_txq_per_tx; j++)
-			bnad_tx(bnad, bnad->tx_info[i].tcb[j]);
+		for (j = 0; j < bnad->num_txq_per_tx; j++) {
+			tcb = bnad->tx_info[i].tcb[j];
+			if (tcb && test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))
+				bnad_tx(bnad, bnad->tx_info[i].tcb[j]);
+		}
 	}
 	/* Rx processing */
 	for (i = 0; i < bnad->num_rx; i++) {
@@ -706,43 +713,49 @@ bnad_set_netdev_perm_addr(struct bnad *bnad)
 
 /* Callbacks */
 void
-bnad_cb_device_enable_mbox_intr(struct bnad *bnad)
+bnad_cb_mbox_intr_enable(struct bnad *bnad)
 {
 	bnad_enable_mbox_irq(bnad);
 }
 
 void
-bnad_cb_device_disable_mbox_intr(struct bnad *bnad)
+bnad_cb_mbox_intr_disable(struct bnad *bnad)
 {
 	bnad_disable_mbox_irq(bnad);
 }
 
 void
-bnad_cb_device_enabled(struct bnad *bnad, enum bna_cb_status status)
+bnad_cb_ioceth_ready(struct bnad *bnad)
+{
+	bnad->bnad_completions.ioc_comp_status = BNA_CB_SUCCESS;
+	complete(&bnad->bnad_completions.ioc_comp);
+}
+
+void
+bnad_cb_ioceth_failed(struct bnad *bnad)
 {
+	bnad->bnad_completions.ioc_comp_status = BNA_CB_FAIL;
 	complete(&bnad->bnad_completions.ioc_comp);
-	bnad->bnad_completions.ioc_comp_status = status;
 }
 
 void
-bnad_cb_device_disabled(struct bnad *bnad, enum bna_cb_status status)
+bnad_cb_ioceth_disabled(struct bnad *bnad)
 {
+	bnad->bnad_completions.ioc_comp_status = BNA_CB_SUCCESS;
 	complete(&bnad->bnad_completions.ioc_comp);
-	bnad->bnad_completions.ioc_comp_status = status;
 }
 
 static void
-bnad_cb_port_disabled(void *arg, enum bna_cb_status status)
+bnad_cb_enet_disabled(void *arg)
 {
 	struct bnad *bnad = (struct bnad *)arg;
 
-	complete(&bnad->bnad_completions.port_comp);
-
 	netif_carrier_off(bnad->netdev);
+	complete(&bnad->bnad_completions.enet_comp);
 }
 
 void
-bnad_cb_port_link_status(struct bnad *bnad,
+bnad_cb_ethport_link_status(struct bnad *bnad,
 			enum bna_link_status link_status)
 {
 	bool link_up = 0;
@@ -750,34 +763,60 @@ bnad_cb_port_link_status(struct bnad *bnad,
 	link_up = (link_status == BNA_LINK_UP) || (link_status == BNA_CEE_UP);
 
 	if (link_status == BNA_CEE_UP) {
+		if (!test_bit(BNAD_RF_CEE_RUNNING, &bnad->run_flags))
+			BNAD_UPDATE_CTR(bnad, cee_toggle);
 		set_bit(BNAD_RF_CEE_RUNNING, &bnad->run_flags);
-		BNAD_UPDATE_CTR(bnad, cee_up);
-	} else
+	} else {
+		if (test_bit(BNAD_RF_CEE_RUNNING, &bnad->run_flags))
+			BNAD_UPDATE_CTR(bnad, cee_toggle);
 		clear_bit(BNAD_RF_CEE_RUNNING, &bnad->run_flags);
+	}
 
 	if (link_up) {
 		if (!netif_carrier_ok(bnad->netdev)) {
-			struct bna_tcb *tcb = bnad->tx_info[0].tcb[0];
-			if (!tcb)
-				return;
-			pr_warn("bna: %s link up\n",
+			uint tx_id, tcb_id;
+			printk(KERN_WARNING "bna: %s link up\n",
 				bnad->netdev->name);
 			netif_carrier_on(bnad->netdev);
 			BNAD_UPDATE_CTR(bnad, link_toggle);
-			if (test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags)) {
-				/* Force an immediate Transmit Schedule */
-				pr_info("bna: %s TX_STARTED\n",
-					bnad->netdev->name);
-				netif_wake_queue(bnad->netdev);
-				BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
-			} else {
-				netif_stop_queue(bnad->netdev);
-				BNAD_UPDATE_CTR(bnad, netif_queue_stop);
+			for (tx_id = 0; tx_id < bnad->num_tx; tx_id++) {
+				for (tcb_id = 0; tcb_id < bnad->num_txq_per_tx;
+				      tcb_id++) {
+					struct bna_tcb *tcb =
+					bnad->tx_info[tx_id].tcb[tcb_id];
+					u32 txq_id;
+					if (!tcb)
+						continue;
+
+					txq_id = tcb->id;
+
+					if (test_bit(BNAD_TXQ_TX_STARTED,
+						     &tcb->flags)) {
+						/*
+						 * Force an immediate
+						 * Transmit Schedule */
+						printk(KERN_INFO "bna: %s %d "
+						      "TXQ_STARTED\n",
+						       bnad->netdev->name,
+						       txq_id);
+						netif_wake_subqueue(
+								bnad->netdev,
+								txq_id);
+						BNAD_UPDATE_CTR(bnad,
+							netif_queue_wakeup);
+					} else {
+						netif_stop_subqueue(
+								bnad->netdev,
+								txq_id);
+						BNAD_UPDATE_CTR(bnad,
+							netif_queue_stop);
+					}
+				}
 			}
 		}
 	} else {
 		if (netif_carrier_ok(bnad->netdev)) {
-			pr_warn("bna: %s link down\n",
+			printk(KERN_WARNING "bna: %s link down\n",
 				bnad->netdev->name);
 			netif_carrier_off(bnad->netdev);
 			BNAD_UPDATE_CTR(bnad, link_toggle);
@@ -786,8 +825,7 @@ bnad_cb_port_link_status(struct bnad *bnad,
 }
 
 static void
-bnad_cb_tx_disabled(void *arg, struct bna_tx *tx,
-			enum bna_cb_status status)
+bnad_cb_tx_disabled(void *arg, struct bna_tx *tx)
 {
 	struct bnad *bnad = (struct bnad *)arg;
 
@@ -864,108 +902,166 @@ bnad_cb_ccb_destroy(struct bnad *bnad, struct bna_ccb *ccb)
 }
 
 static void
-bnad_cb_tx_stall(struct bnad *bnad, struct bna_tcb *tcb)
+bnad_cb_tx_stall(struct bnad *bnad, struct bna_tx *tx)
 {
 	struct bnad_tx_info *tx_info =
-			(struct bnad_tx_info *)tcb->txq->tx->priv;
-
-	if (tx_info != &bnad->tx_info[0])
-		return;
+			(struct bnad_tx_info *)tx->priv;
+	struct bna_tcb *tcb;
+	u32 txq_id;
+	int i;
 
-	clear_bit(BNAD_TXQ_TX_STARTED, &tcb->flags);
-	netif_stop_queue(bnad->netdev);
-	pr_info("bna: %s TX_STOPPED\n", bnad->netdev->name);
+	for (i = 0; i < BNAD_MAX_TXQ_PER_TX; i++) {
+		tcb = tx_info->tcb[i];
+		if (!tcb)
+			continue;
+		txq_id = tcb->id;
+		clear_bit(BNAD_TXQ_TX_STARTED, &tcb->flags);
+		netif_stop_subqueue(bnad->netdev, txq_id);
+		printk(KERN_INFO "bna: %s %d TXQ_STOPPED\n",
+			bnad->netdev->name, txq_id);
+	}
 }
 
 static void
-bnad_cb_tx_resume(struct bnad *bnad, struct bna_tcb *tcb)
+bnad_cb_tx_resume(struct bnad *bnad, struct bna_tx *tx)
 {
-	struct bnad_unmap_q *unmap_q = tcb->unmap_q;
+	struct bnad_tx_info *tx_info = (struct bnad_tx_info *)tx->priv;
+	struct bna_tcb *tcb;
+	struct bnad_unmap_q *unmap_q;
+	u32 txq_id;
+	int i;
 
-	if (test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))
-		return;
+	for (i = 0; i < BNAD_MAX_TXQ_PER_TX; i++) {
+		tcb = tx_info->tcb[i];
+		if (!tcb)
+			continue;
+		txq_id = tcb->id;
 
-	clear_bit(BNAD_RF_TX_SHUTDOWN_DELAYED, &bnad->run_flags);
+		unmap_q = tcb->unmap_q;
 
-	while (test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags))
-		cpu_relax();
+		if (test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))
+			continue;
 
-	bnad_free_all_txbufs(bnad, tcb);
+		while (test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags))
+			cpu_relax();
 
-	unmap_q->producer_index = 0;
-	unmap_q->consumer_index = 0;
+		bnad_free_all_txbufs(bnad, tcb);
 
-	smp_mb__before_clear_bit();
-	clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
+		unmap_q->producer_index = 0;
+		unmap_q->consumer_index = 0;
+
+		smp_mb__before_clear_bit();
+		clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
+
+		set_bit(BNAD_TXQ_TX_STARTED, &tcb->flags);
+
+		if (netif_carrier_ok(bnad->netdev)) {
+			printk(KERN_INFO "bna: %s %d TXQ_STARTED\n",
+				bnad->netdev->name, txq_id);
+			netif_wake_subqueue(bnad->netdev, txq_id);
+			BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
+		}
+	}
 
 	/*
-	 * Workaround for first device enable failure & we
+	 * Workaround for first ioceth enable failure & we
 	 * get a 0 MAC address. We try to get the MAC address
 	 * again here.
 	 */
 	if (is_zero_ether_addr(&bnad->perm_addr.mac[0])) {
-		bna_port_mac_get(&bnad->bna.port, &bnad->perm_addr);
+		bna_enet_perm_mac_get(&bnad->bna.enet, &bnad->perm_addr);
 		bnad_set_netdev_perm_addr(bnad);
 	}
-
-	set_bit(BNAD_TXQ_TX_STARTED, &tcb->flags);
-
-	if (netif_carrier_ok(bnad->netdev)) {
-		pr_info("bna: %s TX_STARTED\n", bnad->netdev->name);
-		netif_wake_queue(bnad->netdev);
-		BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
-	}
 }
 
 static void
-bnad_cb_tx_cleanup(struct bnad *bnad, struct bna_tcb *tcb)
+bnad_cb_tx_cleanup(struct bnad *bnad, struct bna_tx *tx)
 {
-	/* Delay only once for the whole Tx Path Shutdown */
-	if (!test_and_set_bit(BNAD_RF_TX_SHUTDOWN_DELAYED, &bnad->run_flags))
-		mdelay(BNAD_TXRX_SYNC_MDELAY);
+	struct bnad_tx_info *tx_info = (struct bnad_tx_info *)tx->priv;
+	struct bna_tcb *tcb;
+	int i;
+
+	for (i = 0; i < BNAD_MAX_TXQ_PER_TX; i++) {
+		tcb = tx_info->tcb[i];
+		if (!tcb)
+			continue;
+	}
+
+	mdelay(BNAD_TXRX_SYNC_MDELAY);
+	bna_tx_cleanup_complete(tx);
 }
 
 static void
-bnad_cb_rx_cleanup(struct bnad *bnad,
-			struct bna_ccb *ccb)
+bnad_cb_rx_cleanup(struct bnad *bnad, struct bna_rx *rx)
 {
-	clear_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags);
+	struct bnad_rx_info *rx_info = (struct bnad_rx_info *)rx->priv;
+	struct bna_ccb *ccb;
+	struct bnad_rx_ctrl *rx_ctrl;
+	int i;
+
+	mdelay(BNAD_TXRX_SYNC_MDELAY);
+
+	for (i = 0; i < BNAD_MAX_RXPS_PER_RX; i++) {
+		rx_ctrl = &rx_info->rx_ctrl[i];
+		ccb = rx_ctrl->ccb;
+		if (!ccb)
+			continue;
+
+		clear_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags);
 
-	if (ccb->rcb[1])
-		clear_bit(BNAD_RXQ_STARTED, &ccb->rcb[1]->flags);
+		if (ccb->rcb[1])
+			clear_bit(BNAD_RXQ_STARTED, &ccb->rcb[1]->flags);
+
+		while (test_bit(BNAD_FP_IN_RX_PATH, &rx_ctrl->flags))
+			cpu_relax();
+	}
 
-	if (!test_and_set_bit(BNAD_RF_RX_SHUTDOWN_DELAYED, &bnad->run_flags))
-		mdelay(BNAD_TXRX_SYNC_MDELAY);
+	bna_rx_cleanup_complete(rx);
 }
 
 static void
-bnad_cb_rx_post(struct bnad *bnad, struct bna_rcb *rcb)
+bnad_cb_rx_post(struct bnad *bnad, struct bna_rx *rx)
 {
-	struct bnad_unmap_q *unmap_q = rcb->unmap_q;
-
-	clear_bit(BNAD_RF_RX_SHUTDOWN_DELAYED, &bnad->run_flags);
-
-	if (rcb == rcb->cq->ccb->rcb[0])
-		bnad_cq_cmpl_init(bnad, rcb->cq->ccb);
+	struct bnad_rx_info *rx_info = (struct bnad_rx_info *)rx->priv;
+	struct bna_ccb *ccb;
+	struct bna_rcb *rcb;
+	struct bnad_rx_ctrl *rx_ctrl;
+	struct bnad_unmap_q *unmap_q;
+	int i;
+	int j;
 
-	bnad_free_all_rxbufs(bnad, rcb);
+	for (i = 0; i < BNAD_MAX_RXPS_PER_RX; i++) {
+		rx_ctrl = &rx_info->rx_ctrl[i];
+		ccb = rx_ctrl->ccb;
+		if (!ccb)
+			continue;
 
-	set_bit(BNAD_RXQ_STARTED, &rcb->flags);
+		bnad_cq_cmpl_init(bnad, ccb);
 
-	/* Now allocate & post buffers for this RCB */
-	/* !!Allocation in callback context */
-	if (!test_and_set_bit(BNAD_RXQ_REFILL, &rcb->flags)) {
-		if (BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth)
-			 >> BNAD_RXQ_REFILL_THRESHOLD_SHIFT)
-			bnad_alloc_n_post_rxbufs(bnad, rcb);
-		smp_mb__before_clear_bit();
-		clear_bit(BNAD_RXQ_REFILL, &rcb->flags);
+		for (j = 0; j < BNAD_MAX_RXQ_PER_RXP; j++) {
+			rcb = ccb->rcb[j];
+			if (!rcb)
+				continue;
+			bnad_free_all_rxbufs(bnad, rcb);
+
+			set_bit(BNAD_RXQ_STARTED, &rcb->flags);
+			unmap_q = rcb->unmap_q;
+
+			/* Now allocate & post buffers for this RCB */
+			/* !!Allocation in callback context */
+			if (!test_and_set_bit(BNAD_RXQ_REFILL, &rcb->flags)) {
+				if (BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth)
+					>> BNAD_RXQ_REFILL_THRESHOLD_SHIFT)
+					bnad_alloc_n_post_rxbufs(bnad, rcb);
+					smp_mb__before_clear_bit();
+				clear_bit(BNAD_RXQ_REFILL, &rcb->flags);
+			}
+		}
 	}
 }
 
 static void
-bnad_cb_rx_disabled(void *arg, struct bna_rx *rx,
-			enum bna_cb_status status)
+bnad_cb_rx_disabled(void *arg, struct bna_rx *rx)
 {
 	struct bnad *bnad = (struct bnad *)arg;
 
@@ -973,10 +1069,9 @@ bnad_cb_rx_disabled(void *arg, struct bna_rx *rx,
 }
 
 static void
-bnad_cb_rx_mcast_add(struct bnad *bnad, struct bna_rx *rx,
-				enum bna_cb_status status)
+bnad_cb_rx_mcast_add(struct bnad *bnad, struct bna_rx *rx)
 {
-	bnad->bnad_completions.mcast_comp_status = status;
+	bnad->bnad_completions.mcast_comp_status = BNA_CB_SUCCESS;
 	complete(&bnad->bnad_completions.mcast_comp);
 }
 
@@ -995,6 +1090,13 @@ bnad_cb_stats_get(struct bnad *bnad, enum bna_cb_status status,
 		  jiffies + msecs_to_jiffies(BNAD_STATS_TIMER_FREQ));
 }
 
+static void
+bnad_cb_enet_mtu_set(struct bnad *bnad)
+{
+	bnad->bnad_completions.mtu_comp_status = BNA_CB_SUCCESS;
+	complete(&bnad->bnad_completions.mtu_comp);
+}
+
 /* Resource allocation, free functions */
 
 static void
@@ -1073,23 +1175,17 @@ err_return:
 
 /* Free IRQ for Mailbox */
 static void
-bnad_mbox_irq_free(struct bnad *bnad,
-		   struct bna_intr_info *intr_info)
+bnad_mbox_irq_free(struct bnad *bnad)
 {
 	int irq;
 	unsigned long flags;
 
-	if (intr_info->idl == NULL)
-		return;
-
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 	bnad_disable_mbox_irq(bnad);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 	irq = BNAD_GET_MBOX_IRQ(bnad);
 	free_irq(irq, bnad);
-
-	kfree(intr_info->idl);
 }
 
 /*
@@ -1098,32 +1194,22 @@ bnad_mbox_irq_free(struct bnad *bnad,
  * from bna
  */
 static int
-bnad_mbox_irq_alloc(struct bnad *bnad,
-		    struct bna_intr_info *intr_info)
+bnad_mbox_irq_alloc(struct bnad *bnad)
 {
 	int		err = 0;
 	unsigned long	irq_flags, flags;
 	u32	irq;
 	irq_handler_t	irq_handler;
 
-	/* Mbox should use only 1 vector */
-
-	intr_info->idl = kzalloc(sizeof(*(intr_info->idl)), GFP_KERNEL);
-	if (!intr_info->idl)
-		return -ENOMEM;
-
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 	if (bnad->cfg_flags & BNAD_CF_MSIX) {
 		irq_handler = (irq_handler_t)bnad_msix_mbox_handler;
 		irq = bnad->msix_table[BNAD_MAILBOX_MSIX_INDEX].vector;
 		irq_flags = 0;
-		intr_info->intr_type = BNA_INTR_T_MSIX;
-		intr_info->idl[0].vector = BNAD_MAILBOX_MSIX_INDEX;
 	} else {
 		irq_handler = (irq_handler_t)bnad_isr;
 		irq = bnad->pcidev->irq;
 		irq_flags = IRQF_SHARED;
-		intr_info->intr_type = BNA_INTR_T_INTX;
 	}
 
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
@@ -1140,11 +1226,6 @@ bnad_mbox_irq_alloc(struct bnad *bnad,
 	err = request_irq(irq, irq_handler, irq_flags,
 			  bnad->mbox_irq_name, bnad);
 
-	if (err) {
-		kfree(intr_info->idl);
-		intr_info->idl = NULL;
-	}
-
 	return err;
 }
 
@@ -1158,7 +1239,7 @@ bnad_txrx_irq_free(struct bnad *bnad, struct bna_intr_info *intr_info)
 /* Allocates Interrupt Descriptor List for MSIX/INT-X vectors */
 static int
 bnad_txrx_irq_alloc(struct bnad *bnad, enum bnad_intr_source src,
-		    uint txrx_id, struct bna_intr_info *intr_info)
+		    u32 txrx_id, struct bna_intr_info *intr_info)
 {
 	int i, vector_start = 0;
 	u32 cfg_flags;
@@ -1241,7 +1322,7 @@ bnad_tx_msix_unregister(struct bnad *bnad, struct bnad_tx_info *tx_info,
  */
 static int
 bnad_tx_msix_register(struct bnad *bnad, struct bnad_tx_info *tx_info,
-			uint tx_id, int num_txqs)
+			u32 tx_id, int num_txqs)
 {
 	int i;
 	int err;
@@ -1294,7 +1375,7 @@ bnad_rx_msix_unregister(struct bnad *bnad, struct bnad_rx_info *rx_info,
  */
 static int
 bnad_rx_msix_register(struct bnad *bnad, struct bnad_rx_info *rx_info,
-			uint rx_id, int num_rxps)
+			u32 rx_id, int num_rxps)
 {
 	int i;
 	int err;
@@ -1338,7 +1419,7 @@ bnad_tx_res_free(struct bnad *bnad, struct bna_res_info *res_info)
 /* Allocates memory and interrupt resources for Tx object */
 static int
 bnad_tx_res_alloc(struct bnad *bnad, struct bna_res_info *res_info,
-		  uint tx_id)
+		  u32 tx_id)
 {
 	int i, err = 0;
 
@@ -1407,7 +1488,7 @@ bnad_ioc_timeout(unsigned long data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bfa_nw_ioc_timeout((void *) &bnad->bna.device.ioc);
+	bfa_nw_ioc_timeout((void *) &bnad->bna.ioceth.ioc);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 }
 
@@ -1418,7 +1499,7 @@ bnad_ioc_hb_check(unsigned long data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bfa_nw_ioc_hb_check((void *) &bnad->bna.device.ioc);
+	bfa_nw_ioc_hb_check((void *) &bnad->bna.ioceth.ioc);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 }
 
@@ -1429,7 +1510,7 @@ bnad_iocpf_timeout(unsigned long data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bfa_nw_iocpf_timeout((void *) &bnad->bna.device.ioc);
+	bfa_nw_iocpf_timeout((void *) &bnad->bna.ioceth.ioc);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 }
 
@@ -1440,7 +1521,7 @@ bnad_iocpf_sem_timeout(unsigned long data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bfa_nw_iocpf_sem_timeout((void *) &bnad->bna.device.ioc);
+	bfa_nw_iocpf_sem_timeout((void *) &bnad->bna.ioceth.ioc);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 }
 
@@ -1499,7 +1580,7 @@ bnad_stats_timeout(unsigned long data)
 		return;
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bna_stats_get(&bnad->bna);
+	bna_hw_stats_get(&bnad->bna);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 }
 
@@ -1632,7 +1713,7 @@ bnad_napi_disable(struct bnad *bnad, u32 rx_id)
 
 /* Should be held with conf_lock held */
 void
-bnad_cleanup_tx(struct bnad *bnad, uint tx_id)
+bnad_cleanup_tx(struct bnad *bnad, u32 tx_id)
 {
 	struct bnad_tx_info *tx_info = &bnad->tx_info[tx_id];
 	struct bna_res_info *res_info = &bnad->tx_res_info[tx_id].res_info[0];
@@ -1656,6 +1737,7 @@ bnad_cleanup_tx(struct bnad *bnad, uint tx_id)
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 	tx_info->tx = NULL;
+	tx_info->tx_id = 0;
 
 	if (0 == tx_id)
 		tasklet_kill(&bnad->tx_free_tasklet);
@@ -1665,7 +1747,7 @@ bnad_cleanup_tx(struct bnad *bnad, uint tx_id)
 
 /* Should be held with conf_lock held */
 int
-bnad_setup_tx(struct bnad *bnad, uint tx_id)
+bnad_setup_tx(struct bnad *bnad, u32 tx_id)
 {
 	int err;
 	struct bnad_tx_info *tx_info = &bnad->tx_info[tx_id];
@@ -1677,10 +1759,13 @@ bnad_setup_tx(struct bnad *bnad, uint tx_id)
 	struct bna_tx *tx;
 	unsigned long flags;
 
+	tx_info->tx_id = tx_id;
+
 	/* Initialize the Tx object configuration */
 	tx_config->num_txq = bnad->num_txq_per_tx;
 	tx_config->txq_depth = bnad->txq_depth;
 	tx_config->tx_type = BNA_TX_T_REGULAR;
+	tx_config->coalescing_timeo = bnad->tx_coalescing_timeo;
 
 	/* Initialize the tx event handlers */
 	tx_cbfn.tcb_setup_cbfn = bnad_cb_tcb_setup;
@@ -1741,14 +1826,15 @@ bnad_init_rx_config(struct bnad *bnad, struct bna_rx_config *rx_config)
 {
 	rx_config->rx_type = BNA_RX_T_REGULAR;
 	rx_config->num_paths = bnad->num_rxp_per_rx;
+	rx_config->coalescing_timeo = bnad->rx_coalescing_timeo;
 
 	if (bnad->num_rxp_per_rx > 1) {
 		rx_config->rss_status = BNA_STATUS_T_ENABLED;
 		rx_config->rss_config.hash_type =
-				(BFI_RSS_T_V4_TCP |
-				 BFI_RSS_T_V6_TCP |
-				 BFI_RSS_T_V4_IP  |
-				 BFI_RSS_T_V6_IP);
+				(BFI_ENET_RSS_IPV6 |
+				 BFI_ENET_RSS_IPV6_TCP |
+				 BFI_ENET_RSS_IPV4 |
+				 BFI_ENET_RSS_IPV4_TCP);
 		rx_config->rss_config.hash_mask =
 				bnad->num_rxp_per_rx - 1;
 		get_random_bytes(rx_config->rss_config.toeplitz_hash_key,
@@ -1768,7 +1854,7 @@ bnad_init_rx_config(struct bnad *bnad, struct bna_rx_config *rx_config)
 
 /* Called with mutex_lock(&bnad->conf_mutex) held */
 void
-bnad_cleanup_rx(struct bnad *bnad, uint rx_id)
+bnad_cleanup_rx(struct bnad *bnad, u32 rx_id)
 {
 	struct bnad_rx_info *rx_info = &bnad->rx_info[rx_id];
 	struct bna_rx_config *rx_config = &bnad->rx_config[rx_id];
@@ -1811,7 +1897,7 @@ bnad_cleanup_rx(struct bnad *bnad, uint rx_id)
 
 /* Called with mutex_lock(&bnad->conf_mutex) held */
 int
-bnad_setup_rx(struct bnad *bnad, uint rx_id)
+bnad_setup_rx(struct bnad *bnad, u32 rx_id)
 {
 	int err;
 	struct bnad_rx_info *rx_info = &bnad->rx_info[rx_id];
@@ -1823,6 +1909,8 @@ bnad_setup_rx(struct bnad *bnad, uint rx_id)
 	struct bna_rx *rx;
 	unsigned long flags;
 
+	rx_info->rx_id = rx_id;
+
 	/* Initialize the Rx object configuration */
 	bnad_init_rx_config(bnad, rx_config);
 
@@ -1978,7 +2066,7 @@ bnad_restore_vlans(struct bnad *bnad, u32 rx_id)
 	u16 vid;
 	unsigned long flags;
 
-	BUG_ON(!(VLAN_N_VID == (BFI_MAX_VLAN + 1)));
+	BUG_ON(!(VLAN_N_VID == BFI_ENET_VLAN_ID_MAX));
 
 	for_each_set_bit(vid, bnad->active_vlans, VLAN_N_VID) {
 		spin_lock_irqsave(&bnad->bna_lock, flags);
@@ -2031,11 +2119,11 @@ bnad_netdev_qstats_fill(struct bnad *bnad, struct rtnl_link_stats64 *stats)
 void
 bnad_netdev_hwstats_fill(struct bnad *bnad, struct rtnl_link_stats64 *stats)
 {
-	struct bfi_ll_stats_mac *mac_stats;
-	u64 bmap;
+	struct bfi_enet_stats_mac *mac_stats;
+	u32 bmap;
 	int i;
 
-	mac_stats = &bnad->stats.bna_stats->hw_stats->mac_stats;
+	mac_stats = &bnad->stats.bna_stats->hw_stats.mac_stats;
 	stats->rx_errors =
 		mac_stats->rx_fcs_error + mac_stats->rx_alignment_error +
 		mac_stats->rx_frame_length_error + mac_stats->rx_code_error +
@@ -2054,13 +2142,12 @@ bnad_netdev_hwstats_fill(struct bnad *bnad, struct rtnl_link_stats64 *stats)
 	stats->rx_crc_errors = mac_stats->rx_fcs_error;
 	stats->rx_frame_errors = mac_stats->rx_alignment_error;
 	/* recv'r fifo overrun */
-	bmap = (u64)bnad->stats.bna_stats->rxf_bmap[0] |
-		((u64)bnad->stats.bna_stats->rxf_bmap[1] << 32);
-	for (i = 0; bmap && (i < BFI_LL_RXF_ID_MAX); i++) {
+	bmap = bna_rx_rid_mask(&bnad->bna);
+	for (i = 0; bmap; i++) {
 		if (bmap & 1) {
 			stats->rx_fifo_errors +=
 				bnad->stats.bna_stats->
-					hw_stats->rxf_stats[i].frame_drops;
+					hw_stats.rxf_stats[i].frame_drops;
 			break;
 		}
 		bmap >>= 1;
@@ -2158,7 +2245,7 @@ bnad_q_num_init(struct bnad *bnad)
  * Called with bnad->bna_lock held b'cos of cfg_flags access
  */
 static void
-bnad_q_num_adjust(struct bnad *bnad, int msix_vectors)
+bnad_q_num_adjust(struct bnad *bnad, int msix_vectors, int temp)
 {
 	bnad->num_txq_per_tx = 1;
 	if ((msix_vectors >= (bnad->num_tx * bnad->num_txq_per_tx)  +
@@ -2171,76 +2258,72 @@ bnad_q_num_adjust(struct bnad *bnad, int msix_vectors)
 		bnad->num_rxp_per_rx = 1;
 }
 
-/* Enable / disable device */
-static void
-bnad_device_disable(struct bnad *bnad)
+/* Enable / disable ioceth */
+static int
+bnad_ioceth_disable(struct bnad *bnad)
 {
 	unsigned long flags;
-
-	init_completion(&bnad->bnad_completions.ioc_comp);
+	int err = 0;
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bna_device_disable(&bnad->bna.device, BNA_HARD_CLEANUP);
+	init_completion(&bnad->bnad_completions.ioc_comp);
+	bna_ioceth_disable(&bnad->bna.ioceth, BNA_HARD_CLEANUP);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
-	wait_for_completion(&bnad->bnad_completions.ioc_comp);
+	wait_for_completion_timeout(&bnad->bnad_completions.ioc_comp,
+		msecs_to_jiffies(BNAD_IOCETH_TIMEOUT));
+
+	err = bnad->bnad_completions.ioc_comp_status;
+	return err;
 }
 
 static int
-bnad_device_enable(struct bnad *bnad)
+bnad_ioceth_enable(struct bnad *bnad)
 {
 	int err = 0;
 	unsigned long flags;
 
-	init_completion(&bnad->bnad_completions.ioc_comp);
-
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bna_device_enable(&bnad->bna.device);
+	init_completion(&bnad->bnad_completions.ioc_comp);
+	bnad->bnad_completions.ioc_comp_status = BNA_CB_WAITING;
+	bna_ioceth_enable(&bnad->bna.ioceth);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
-	wait_for_completion(&bnad->bnad_completions.ioc_comp);
+	wait_for_completion_timeout(&bnad->bnad_completions.ioc_comp,
+		msecs_to_jiffies(BNAD_IOCETH_TIMEOUT));
 
-	if (bnad->bnad_completions.ioc_comp_status)
-		err = bnad->bnad_completions.ioc_comp_status;
+	err = bnad->bnad_completions.ioc_comp_status;
 
 	return err;
 }
 
 /* Free BNA resources */
 static void
-bnad_res_free(struct bnad *bnad)
+bnad_res_free(struct bnad *bnad, struct bna_res_info *res_info,
+		u32 res_val_max)
 {
 	int i;
-	struct bna_res_info *res_info = &bnad->res_info[0];
 
-	for (i = 0; i < BNA_RES_T_MAX; i++) {
-		if (res_info[i].res_type == BNA_RES_T_MEM)
-			bnad_mem_free(bnad, &res_info[i].res_u.mem_info);
-		else
-			bnad_mbox_irq_free(bnad, &res_info[i].res_u.intr_info);
-	}
+	for (i = 0; i < res_val_max; i++)
+		bnad_mem_free(bnad, &res_info[i].res_u.mem_info);
 }
 
 /* Allocates memory and interrupt resources for BNA */
 static int
-bnad_res_alloc(struct bnad *bnad)
+bnad_res_alloc(struct bnad *bnad, struct bna_res_info *res_info,
+		u32 res_val_max)
 {
 	int i, err;
-	struct bna_res_info *res_info = &bnad->res_info[0];
 
-	for (i = 0; i < BNA_RES_T_MAX; i++) {
-		if (res_info[i].res_type == BNA_RES_T_MEM)
-			err = bnad_mem_alloc(bnad, &res_info[i].res_u.mem_info);
-		else
-			err = bnad_mbox_irq_alloc(bnad,
-						  &res_info[i].res_u.intr_info);
+	for (i = 0; i < res_val_max; i++) {
+		err = bnad_mem_alloc(bnad, &res_info[i].res_u.mem_info);
 		if (err)
 			goto err_return;
 	}
 	return 0;
 
 err_return:
-	bnad_res_free(bnad);
+	bnad_res_free(bnad, res_info, res_val_max);
 	return err;
 }
 
@@ -2276,7 +2359,7 @@ bnad_enable_msix(struct bnad *bnad)
 
 		spin_lock_irqsave(&bnad->bna_lock, flags);
 		/* ret = #of vectors that we got */
-		bnad_q_num_adjust(bnad, ret);
+		bnad_q_num_adjust(bnad, ret, 0);
 		spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 		bnad->msix_num = (bnad->num_tx * bnad->num_txq_per_tx)
@@ -2284,6 +2367,9 @@ bnad_enable_msix(struct bnad *bnad)
 			* bnad->num_rxp_per_rx) +
 			 BNAD_MAILBOX_MSIX_VECTORS;
 
+		if (bnad->msix_num > ret)
+			goto intx_mode;
+
 		/* Try once more with adjusted numbers */
 		/* If this fails, fall back to INTx */
 		ret = pci_enable_msix(bnad->pcidev, bnad->msix_table,
@@ -2293,6 +2379,9 @@ bnad_enable_msix(struct bnad *bnad)
 
 	} else if (ret < 0)
 		goto intx_mode;
+
+	pci_intx(bnad->pcidev, 0);
+
 	return;
 
 intx_mode:
@@ -2351,12 +2440,12 @@ bnad_open(struct net_device *netdev)
 	pause_config.tx_pause = 0;
 	pause_config.rx_pause = 0;
 
-	mtu = ETH_HLEN + bnad->netdev->mtu + ETH_FCS_LEN;
+	mtu = ETH_HLEN + VLAN_HLEN + bnad->netdev->mtu + ETH_FCS_LEN;
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bna_port_mtu_set(&bnad->bna.port, mtu, NULL);
-	bna_port_pause_config(&bnad->bna.port, &pause_config, NULL);
-	bna_port_enable(&bnad->bna.port);
+	bna_enet_mtu_set(&bnad->bna.enet, mtu, NULL);
+	bna_enet_pause_config(&bnad->bna.enet, &pause_config, NULL);
+	bna_enet_enable(&bnad->bna.enet);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 	/* Enable broadcast */
@@ -2396,14 +2485,14 @@ bnad_stop(struct net_device *netdev)
 	/* Stop the stats timer */
 	bnad_stats_timer_stop(bnad);
 
-	init_completion(&bnad->bnad_completions.port_comp);
+	init_completion(&bnad->bnad_completions.enet_comp);
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bna_port_disable(&bnad->bna.port, BNA_HARD_CLEANUP,
-			bnad_cb_port_disabled);
+	bna_enet_disable(&bnad->bna.enet, BNA_HARD_CLEANUP,
+			bnad_cb_enet_disabled);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
-	wait_for_completion(&bnad->bnad_completions.port_comp);
+	wait_for_completion(&bnad->bnad_completions.enet_comp);
 
 	bnad_cleanup_tx(bnad, 0);
 	bnad_cleanup_rx(bnad, 0);
@@ -2425,19 +2514,18 @@ static netdev_tx_t
 bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct bnad *bnad = netdev_priv(netdev);
+	u32 txq_id = 0;
+	struct bna_tcb *tcb = bnad->tx_info[0].tcb[txq_id];
 
 	u16		txq_prod, vlan_tag = 0;
 	u32		unmap_prod, wis, wis_used, wi_range;
 	u32		vectors, vect_id, i, acked;
-	u32		tx_id;
 	int			err;
 
-	struct bnad_tx_info *tx_info;
-	struct bna_tcb *tcb;
-	struct bnad_unmap_q *unmap_q;
+	struct bnad_unmap_q *unmap_q = tcb->unmap_q;
 	dma_addr_t		dma_addr;
 	struct bna_txq_entry *txqent;
-	bna_txq_wi_ctrl_flag_t	flags;
+	u16	flags;
 
 	if (unlikely
 	    (skb->len <= ETH_HLEN || skb->len > BFI_TX_MAX_DATA_PER_PKT)) {
@@ -2445,15 +2533,9 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		return NETDEV_TX_OK;
 	}
 
-	tx_id = 0;
-
-	tx_info = &bnad->tx_info[tx_id];
-	tcb = tx_info->tcb[tx_id];
-	unmap_q = tcb->unmap_q;
-
 	/*
 	 * Takes care of the Tx that is scheduled between clearing the flag
-	 * and the netif_stop_queue() call.
+	 * and the netif_stop_all_queue() call.
 	 */
 	if (unlikely(!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))) {
 		dev_kfree_skb(skb);
@@ -2467,9 +2549,8 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	}
 	wis = BNA_TXQ_WI_NEEDED(vectors);	/* 4 vectors per work item */
 	acked = 0;
-	if (unlikely
-	    (wis > BNA_QE_FREE_CNT(tcb, tcb->q_depth) ||
-	     vectors > BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth))) {
+	if (unlikely(wis > BNA_QE_FREE_CNT(tcb, tcb->q_depth) ||
+			vectors > BNA_QE_FREE_CNT(unmap_q, unmap_q->q_depth))) {
 		if ((u16) (*tcb->hw_consumer_index) !=
 		    tcb->consumer_index &&
 		    !test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags)) {
@@ -2602,7 +2683,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
-		u32		size = frag->size;
+		u16		size = frag->size;
 
 		if (++vect_id == BFI_TX_MAX_VECTORS_PER_WI) {
 			vect_id = 0;
@@ -2760,11 +2841,25 @@ bnad_set_mac_address(struct net_device *netdev, void *mac_addr)
 }
 
 static int
-bnad_change_mtu(struct net_device *netdev, int new_mtu)
+bnad_mtu_set(struct bnad *bnad, int mtu)
 {
-	int mtu, err = 0;
 	unsigned long flags;
 
+	init_completion(&bnad->bnad_completions.mtu_comp);
+
+	spin_lock_irqsave(&bnad->bna_lock, flags);
+	bna_enet_mtu_set(&bnad->bna.enet, mtu, bnad_cb_enet_mtu_set);
+	spin_unlock_irqrestore(&bnad->bna_lock, flags);
+
+	wait_for_completion(&bnad->bnad_completions.mtu_comp);
+
+	return bnad->bnad_completions.mtu_comp_status;
+}
+
+static int
+bnad_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	int err, mtu = netdev->mtu;
 	struct bnad *bnad = netdev_priv(netdev);
 
 	if (new_mtu + ETH_HLEN < ETH_ZLEN || new_mtu > BNAD_JUMBO_MTU)
@@ -2774,11 +2869,10 @@ bnad_change_mtu(struct net_device *netdev, int new_mtu)
 
 	netdev->mtu = new_mtu;
 
-	mtu = ETH_HLEN + new_mtu + ETH_FCS_LEN;
-
-	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bna_port_mtu_set(&bnad->bna.port, mtu, NULL);
-	spin_unlock_irqrestore(&bnad->bna_lock, flags);
+	mtu = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
+	err = bnad_mtu_set(bnad, mtu);
+	if (err)
+		err = -EBUSY;
 
 	mutex_unlock(&bnad->conf_mutex);
 	return err;
@@ -2863,7 +2957,6 @@ static const struct net_device_ops bnad_netdev_ops = {
 	.ndo_start_xmit		= bnad_start_xmit,
 	.ndo_get_stats64		= bnad_get_stats64,
 	.ndo_set_rx_mode	= bnad_set_rx_mode,
-	.ndo_set_multicast_list = bnad_set_rx_mode,
 	.ndo_validate_addr      = eth_validate_addr,
 	.ndo_set_mac_address    = bnad_set_mac_address,
 	.ndo_change_mtu		= bnad_change_mtu,
@@ -2968,7 +3061,7 @@ bnad_uninit(struct bnad *bnad)
 
 /*
  * Initialize locks
-	a) Per device mutes used for serializing configuration
+	a) Per ioceth mutes used for serializing configuration
 	   changes from OS interface
 	b) spin lock used to protect bna state machine
  */
@@ -3058,12 +3151,15 @@ bnad_pci_probe(struct pci_dev *pdev,
 	 */
 	netdev = alloc_etherdev(sizeof(struct bnad));
 	if (!netdev) {
-		dev_err(&pdev->dev, "alloc_etherdev failed\n");
+		dev_err(&pdev->dev, "netdev allocation failed\n");
 		err = -ENOMEM;
 		return err;
 	}
 	bnad = netdev_priv(netdev);
 
+	bnad_lock_init(bnad);
+
+	mutex_lock(&bnad->conf_mutex);
 	/*
 	 * PCI initialization
 	 *	Output : using_dac = 1 for 64 bit DMA
@@ -3071,9 +3167,8 @@ bnad_pci_probe(struct pci_dev *pdev,
 	 */
 	err = bnad_pci_init(bnad, pdev, &using_dac);
 	if (err)
-		goto free_netdev;
+		goto unlock_mutex;
 
-	bnad_lock_init(bnad);
 	/*
 	 * Initialize bnad structure
 	 * Setup relation between pci_dev & netdev
@@ -3082,21 +3177,22 @@ bnad_pci_probe(struct pci_dev *pdev,
 	err = bnad_init(bnad, pdev, netdev);
 	if (err)
 		goto pci_uninit;
+
 	/* Initialize netdev structure, set up ethtool ops */
 	bnad_netdev_init(bnad, using_dac);
 
 	/* Set link to down state */
 	netif_carrier_off(netdev);
 
-	bnad_enable_msix(bnad);
-
 	/* Get resource requirement form bna */
+	spin_lock_irqsave(&bnad->bna_lock, flags);
 	bna_res_req(&bnad->res_info[0]);
+	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 	/* Allocate resources from bna */
-	err = bnad_res_alloc(bnad);
+	err = bnad_res_alloc(bnad, &bnad->res_info[0], BNA_RES_T_MAX);
 	if (err)
-		goto free_netdev;
+		goto drv_uninit;
 
 	bna = &bnad->bna;
 
@@ -3106,70 +3202,103 @@ bnad_pci_probe(struct pci_dev *pdev,
 	pcidev_info.device_id = bnad->pcidev->device;
 	pcidev_info.pci_bar_kva = bnad->bar0;
 
-	mutex_lock(&bnad->conf_mutex);
-
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 	bna_init(bna, bnad, &pcidev_info, &bnad->res_info[0]);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 	bnad->stats.bna_stats = &bna->stats;
 
+	bnad_enable_msix(bnad);
+	err = bnad_mbox_irq_alloc(bnad);
+	if (err)
+		goto res_free;
+
+
 	/* Set up timers */
-	setup_timer(&bnad->bna.device.ioc.ioc_timer, bnad_ioc_timeout,
+	setup_timer(&bnad->bna.ioceth.ioc.ioc_timer, bnad_ioc_timeout,
 				((unsigned long)bnad));
-	setup_timer(&bnad->bna.device.ioc.hb_timer, bnad_ioc_hb_check,
+	setup_timer(&bnad->bna.ioceth.ioc.hb_timer, bnad_ioc_hb_check,
 				((unsigned long)bnad));
-	setup_timer(&bnad->bna.device.ioc.iocpf_timer, bnad_iocpf_timeout,
+	setup_timer(&bnad->bna.ioceth.ioc.iocpf_timer, bnad_iocpf_timeout,
 				((unsigned long)bnad));
-	setup_timer(&bnad->bna.device.ioc.sem_timer, bnad_iocpf_sem_timeout,
+	setup_timer(&bnad->bna.ioceth.ioc.sem_timer, bnad_iocpf_sem_timeout,
 				((unsigned long)bnad));
 
 	/* Now start the timer before calling IOC */
-	mod_timer(&bnad->bna.device.ioc.iocpf_timer,
+	mod_timer(&bnad->bna.ioceth.ioc.iocpf_timer,
 		  jiffies + msecs_to_jiffies(BNA_IOC_TIMER_FREQ));
 
 	/*
 	 * Start the chip
-	 * Don't care even if err != 0, bna state machine will
-	 * deal with it
+	 * If the call back comes with error, we bail out.
+	 * This is a catastrophic error.
 	 */
-	err = bnad_device_enable(bnad);
+	err = bnad_ioceth_enable(bnad);
+	if (err) {
+		pr_err("BNA: Initialization failed err=%d\n",
+		       err);
+		goto probe_success;
+	}
+
+	spin_lock_irqsave(&bnad->bna_lock, flags);
+	if (bna_num_txq_set(bna, BNAD_NUM_TXQ + 1) ||
+		bna_num_rxp_set(bna, BNAD_NUM_RXP + 1)) {
+		bnad_q_num_adjust(bnad, bna_attr(bna)->num_txq - 1,
+			bna_attr(bna)->num_rxp - 1);
+		if (bna_num_txq_set(bna, BNAD_NUM_TXQ + 1) ||
+			bna_num_rxp_set(bna, BNAD_NUM_RXP + 1))
+			err = -EIO;
+	}
+	bna_mod_res_req(&bnad->bna, &bnad->mod_res_info[0]);
+	spin_unlock_irqrestore(&bnad->bna_lock, flags);
+
+	err = bnad_res_alloc(bnad, &bnad->mod_res_info[0], BNA_MOD_RES_T_MAX);
+	if (err)
+		goto disable_ioceth;
+
+	spin_lock_irqsave(&bnad->bna_lock, flags);
+	bna_mod_init(&bnad->bna, &bnad->mod_res_info[0]);
+	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 	/* Get the burnt-in mac */
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bna_port_mac_get(&bna->port, &bnad->perm_addr);
+	bna_enet_perm_mac_get(&bna->enet, &bnad->perm_addr);
 	bnad_set_netdev_perm_addr(bnad);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
-	mutex_unlock(&bnad->conf_mutex);
-
 	/* Finally, reguister with net_device layer */
 	err = register_netdev(netdev);
 	if (err) {
 		pr_err("BNA : Registering with netdev failed\n");
-		goto disable_device;
+		goto probe_uninit;
 	}
+	set_bit(BNAD_RF_NETDEV_REGISTERED, &bnad->run_flags);
 
+probe_success:
+	mutex_unlock(&bnad->conf_mutex);
 	return 0;
 
-disable_device:
-	mutex_lock(&bnad->conf_mutex);
-	bnad_device_disable(bnad);
-	del_timer_sync(&bnad->bna.device.ioc.ioc_timer);
-	del_timer_sync(&bnad->bna.device.ioc.sem_timer);
-	del_timer_sync(&bnad->bna.device.ioc.hb_timer);
+probe_uninit:
+	bnad_res_free(bnad, &bnad->mod_res_info[0], BNA_MOD_RES_T_MAX);
+disable_ioceth:
+	bnad_ioceth_disable(bnad);
+	del_timer_sync(&bnad->bna.ioceth.ioc.ioc_timer);
+	del_timer_sync(&bnad->bna.ioceth.ioc.sem_timer);
+	del_timer_sync(&bnad->bna.ioceth.ioc.hb_timer);
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 	bna_uninit(bna);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
-	mutex_unlock(&bnad->conf_mutex);
-
-	bnad_res_free(bnad);
+	bnad_mbox_irq_free(bnad);
 	bnad_disable_msix(bnad);
+res_free:
+	bnad_res_free(bnad, &bnad->res_info[0], BNA_RES_T_MAX);
+drv_uninit:
+	bnad_uninit(bnad);
 pci_uninit:
 	bnad_pci_uninit(pdev);
+unlock_mutex:
+	mutex_unlock(&bnad->conf_mutex);
 	bnad_lock_uninit(bnad);
-	bnad_uninit(bnad);
-free_netdev:
 	free_netdev(netdev);
 	return err;
 }
@@ -3189,21 +3318,24 @@ bnad_pci_remove(struct pci_dev *pdev)
 	bnad = netdev_priv(netdev);
 	bna = &bnad->bna;
 
-	unregister_netdev(netdev);
+	if (test_and_clear_bit(BNAD_RF_NETDEV_REGISTERED, &bnad->run_flags))
+		unregister_netdev(netdev);
 
 	mutex_lock(&bnad->conf_mutex);
-	bnad_device_disable(bnad);
-	del_timer_sync(&bnad->bna.device.ioc.ioc_timer);
-	del_timer_sync(&bnad->bna.device.ioc.sem_timer);
-	del_timer_sync(&bnad->bna.device.ioc.hb_timer);
+	bnad_ioceth_disable(bnad);
+	del_timer_sync(&bnad->bna.ioceth.ioc.ioc_timer);
+	del_timer_sync(&bnad->bna.ioceth.ioc.sem_timer);
+	del_timer_sync(&bnad->bna.ioceth.ioc.hb_timer);
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 	bna_uninit(bna);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
-	mutex_unlock(&bnad->conf_mutex);
 
-	bnad_res_free(bnad);
+	bnad_res_free(bnad, &bnad->mod_res_info[0], BNA_MOD_RES_T_MAX);
+	bnad_res_free(bnad, &bnad->res_info[0], BNA_RES_T_MAX);
+	bnad_mbox_irq_free(bnad);
 	bnad_disable_msix(bnad);
 	bnad_pci_uninit(pdev);
+	mutex_unlock(&bnad->conf_mutex);
 	bnad_lock_uninit(bnad);
 	bnad_uninit(bnad);
 	free_netdev(netdev);
diff --git a/drivers/net/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h
index 458eb30371b5..5b5451edf497 100644
--- a/drivers/net/bna/bnad.h
+++ b/drivers/net/ethernet/brocade/bna/bnad.h
@@ -44,6 +44,7 @@
 
 #define BNAD_MAX_RXS		1
 #define BNAD_MAX_RXPS_PER_RX	16
+#define BNAD_MAX_RXQ_PER_RXP	2
 
 /*
  * Control structure pointed to ccb->ctrl, which
@@ -66,7 +67,7 @@ struct bnad_rx_ctrl {
 #define BNAD_NAME			"bna"
 #define BNAD_NAME_LEN			64
 
-#define BNAD_VERSION			"2.3.2.3"
+#define BNAD_VERSION			"3.0.2.0"
 
 #define BNAD_MAILBOX_MSIX_INDEX		0
 #define BNAD_MAILBOX_MSIX_VECTORS	1
@@ -76,6 +77,8 @@ struct bnad_rx_ctrl {
 #define BNAD_STATS_TIMER_FREQ		1000	/* in msecs */
 #define BNAD_DIM_TIMER_FREQ		1000	/* in msecs */
 
+#define BNAD_IOCETH_TIMEOUT	     10000
+
 #define BNAD_MAX_Q_DEPTH		0x10000
 #define BNAD_MIN_Q_DEPTH		0x200
 
@@ -93,6 +96,10 @@ struct bnad_rx_ctrl {
 #define BNAD_RXQ_REFILL			0
 #define BNAD_RXQ_STARTED		1
 
+/* Resource limits */
+#define BNAD_NUM_TXQ			(bnad->num_tx * bnad->num_txq_per_tx)
+#define BNAD_NUM_RXP			(bnad->num_rx * bnad->num_rxp_per_rx)
+
 /*
  * DATA STRUCTURES
  */
@@ -115,7 +122,8 @@ struct bnad_completion {
 	struct completion	tx_comp;
 	struct completion	rx_comp;
 	struct completion	stats_comp;
-	struct completion	port_comp;
+	struct completion	enet_comp;
+	struct completion	mtu_comp;
 
 	u8			ioc_comp_status;
 	u8			ucast_comp_status;
@@ -124,6 +132,7 @@ struct bnad_completion {
 	u8			rx_comp_status;
 	u8			stats_comp_status;
 	u8			port_comp_status;
+	u8			mtu_comp_status;
 };
 
 /* Tx Rx Control Stats */
@@ -145,6 +154,7 @@ struct bnad_drv_stats {
 	u64		netif_rx_dropped;
 
 	u64		link_toggle;
+	u64		cee_toggle;
 	u64		cee_up;
 
 	u64		rxp_info_alloc_failed;
@@ -174,12 +184,14 @@ struct bnad_rx_res_info {
 struct bnad_tx_info {
 	struct bna_tx *tx; /* 1:1 between tx_info & tx */
 	struct bna_tcb *tcb[BNAD_MAX_TXQ_PER_TX];
+	u32 tx_id;
 } ____cacheline_aligned;
 
 struct bnad_rx_info {
 	struct bna_rx *rx; /* 1:1 between rx_info & rx */
 
 	struct bnad_rx_ctrl rx_ctrl[BNAD_MAX_RXPS_PER_RX];
+	u32 rx_id;
 } ____cacheline_aligned;
 
 /* Unmap queues for Tx / Rx cleanup */
@@ -205,13 +217,18 @@ struct bnad_unmap_q {
 /* Defines for run_flags bit-mask */
 /* Set, tested & cleared using xxx_bit() functions */
 /* Values indicated bit positions */
-#define	BNAD_RF_CEE_RUNNING		1
+#define BNAD_RF_CEE_RUNNING		0
+#define BNAD_RF_MTU_SET		1
 #define BNAD_RF_MBOX_IRQ_DISABLED	2
-#define BNAD_RF_RX_STARTED		3
+#define BNAD_RF_NETDEV_REGISTERED	3
 #define BNAD_RF_DIM_TIMER_RUNNING	4
 #define BNAD_RF_STATS_TIMER_RUNNING	5
-#define BNAD_RF_TX_SHUTDOWN_DELAYED	6
-#define BNAD_RF_RX_SHUTDOWN_DELAYED	7
+#define BNAD_RF_TX_PRIO_SET		6
+
+
+/* Define for Fast Path flags */
+/* Defined as bit positions */
+#define BNAD_FP_IN_RX_PATH	      0
 
 struct bnad {
 	struct net_device	*netdev;
@@ -265,6 +282,7 @@ struct bnad {
 
 	/* Control path resources, memory & irq */
 	struct bna_res_info res_info[BNA_RES_T_MAX];
+	struct bna_res_info mod_res_info[BNA_MOD_RES_T_MAX];
 	struct bnad_tx_res_info tx_res_info[BNAD_MAX_TXS];
 	struct bnad_rx_res_info rx_res_info[BNAD_MAX_RXS];
 
@@ -302,10 +320,10 @@ extern void bnad_set_ethtool_ops(struct net_device *netdev);
 extern void bnad_tx_coalescing_timeo_set(struct bnad *bnad);
 extern void bnad_rx_coalescing_timeo_set(struct bnad *bnad);
 
-extern int bnad_setup_rx(struct bnad *bnad, uint rx_id);
-extern int bnad_setup_tx(struct bnad *bnad, uint tx_id);
-extern void bnad_cleanup_tx(struct bnad *bnad, uint tx_id);
-extern void bnad_cleanup_rx(struct bnad *bnad, uint rx_id);
+extern int bnad_setup_rx(struct bnad *bnad, u32 rx_id);
+extern int bnad_setup_tx(struct bnad *bnad, u32 tx_id);
+extern void bnad_cleanup_tx(struct bnad *bnad, u32 tx_id);
+extern void bnad_cleanup_rx(struct bnad *bnad, u32 rx_id);
 
 /* Timer start/stop protos */
 extern void bnad_dim_timer_start(struct bnad *bnad);
diff --git a/drivers/net/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
index fea07f19a5db..1c19dcea83c2 100644
--- a/drivers/net/bna/bnad_ethtool.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
@@ -29,14 +29,14 @@
 
 #define BNAD_NUM_TXF_COUNTERS 12
 #define BNAD_NUM_RXF_COUNTERS 10
-#define BNAD_NUM_CQ_COUNTERS 3
+#define BNAD_NUM_CQ_COUNTERS (3 + 5)
 #define BNAD_NUM_RXQ_COUNTERS 6
 #define BNAD_NUM_TXQ_COUNTERS 5
 
 #define BNAD_ETHTOOL_STATS_NUM						\
 	(sizeof(struct rtnl_link_stats64) / sizeof(u64) +	\
 	sizeof(struct bnad_drv_stats) / sizeof(u64) +		\
-	offsetof(struct bfi_ll_stats, rxf_stats[0]) / sizeof(u64))
+	offsetof(struct bfi_enet_stats, rxf_stats[0]) / sizeof(u64))
 
 static char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = {
 	"rx_packets",
@@ -277,7 +277,7 @@ bnad_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
 	ioc_attr = kzalloc(sizeof(*ioc_attr), GFP_KERNEL);
 	if (ioc_attr) {
 		spin_lock_irqsave(&bnad->bna_lock, flags);
-		bfa_nw_ioc_get_attr(&bnad->bna.device.ioc, ioc_attr);
+		bfa_nw_ioc_get_attr(&bnad->bna.ioceth.ioc, ioc_attr);
 		spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 		strncpy(drvinfo->fw_version, ioc_attr->adapter_attr.fw_ver,
@@ -288,323 +288,6 @@ bnad_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
 	strncpy(drvinfo->bus_info, pci_name(bnad->pcidev), ETHTOOL_BUSINFO_LEN);
 }
 
-static int
-get_regs(struct bnad *bnad, u32 * regs)
-{
-	int num = 0, i;
-	u32 reg_addr;
-	unsigned long flags;
-
-#define BNAD_GET_REG(addr)					\
-do {								\
-	if (regs)						\
-		regs[num++] = readl(bnad->bar0 + (addr));	\
-	else							\
-		num++;						\
-} while (0)
-
-	spin_lock_irqsave(&bnad->bna_lock, flags);
-
-	/* DMA Block Internal Registers */
-	BNAD_GET_REG(DMA_CTRL_REG0);
-	BNAD_GET_REG(DMA_CTRL_REG1);
-	BNAD_GET_REG(DMA_ERR_INT_STATUS);
-	BNAD_GET_REG(DMA_ERR_INT_ENABLE);
-	BNAD_GET_REG(DMA_ERR_INT_STATUS_SET);
-
-	/* APP Block Register Address Offset from BAR0 */
-	BNAD_GET_REG(HOSTFN0_INT_STATUS);
-	BNAD_GET_REG(HOSTFN0_INT_MASK);
-	BNAD_GET_REG(HOST_PAGE_NUM_FN0);
-	BNAD_GET_REG(HOST_MSIX_ERR_INDEX_FN0);
-	BNAD_GET_REG(FN0_PCIE_ERR_REG);
-	BNAD_GET_REG(FN0_ERR_TYPE_STATUS_REG);
-	BNAD_GET_REG(FN0_ERR_TYPE_MSK_STATUS_REG);
-
-	BNAD_GET_REG(HOSTFN1_INT_STATUS);
-	BNAD_GET_REG(HOSTFN1_INT_MASK);
-	BNAD_GET_REG(HOST_PAGE_NUM_FN1);
-	BNAD_GET_REG(HOST_MSIX_ERR_INDEX_FN1);
-	BNAD_GET_REG(FN1_PCIE_ERR_REG);
-	BNAD_GET_REG(FN1_ERR_TYPE_STATUS_REG);
-	BNAD_GET_REG(FN1_ERR_TYPE_MSK_STATUS_REG);
-
-	BNAD_GET_REG(PCIE_MISC_REG);
-
-	BNAD_GET_REG(HOST_SEM0_INFO_REG);
-	BNAD_GET_REG(HOST_SEM1_INFO_REG);
-	BNAD_GET_REG(HOST_SEM2_INFO_REG);
-	BNAD_GET_REG(HOST_SEM3_INFO_REG);
-
-	BNAD_GET_REG(TEMPSENSE_CNTL_REG);
-	BNAD_GET_REG(TEMPSENSE_STAT_REG);
-
-	BNAD_GET_REG(APP_LOCAL_ERR_STAT);
-	BNAD_GET_REG(APP_LOCAL_ERR_MSK);
-
-	BNAD_GET_REG(PCIE_LNK_ERR_STAT);
-	BNAD_GET_REG(PCIE_LNK_ERR_MSK);
-
-	BNAD_GET_REG(FCOE_FIP_ETH_TYPE);
-	BNAD_GET_REG(RESV_ETH_TYPE);
-
-	BNAD_GET_REG(HOSTFN2_INT_STATUS);
-	BNAD_GET_REG(HOSTFN2_INT_MASK);
-	BNAD_GET_REG(HOST_PAGE_NUM_FN2);
-	BNAD_GET_REG(HOST_MSIX_ERR_INDEX_FN2);
-	BNAD_GET_REG(FN2_PCIE_ERR_REG);
-	BNAD_GET_REG(FN2_ERR_TYPE_STATUS_REG);
-	BNAD_GET_REG(FN2_ERR_TYPE_MSK_STATUS_REG);
-
-	BNAD_GET_REG(HOSTFN3_INT_STATUS);
-	BNAD_GET_REG(HOSTFN3_INT_MASK);
-	BNAD_GET_REG(HOST_PAGE_NUM_FN3);
-	BNAD_GET_REG(HOST_MSIX_ERR_INDEX_FN3);
-	BNAD_GET_REG(FN3_PCIE_ERR_REG);
-	BNAD_GET_REG(FN3_ERR_TYPE_STATUS_REG);
-	BNAD_GET_REG(FN3_ERR_TYPE_MSK_STATUS_REG);
-
-	/* Host Command Status Registers */
-	reg_addr = HOST_CMDSTS0_CLR_REG;
-	for (i = 0; i < 16; i++) {
-		BNAD_GET_REG(reg_addr);
-		BNAD_GET_REG(reg_addr + 4);
-		BNAD_GET_REG(reg_addr + 8);
-		reg_addr += 0x10;
-	}
-
-	/* Function ID register */
-	BNAD_GET_REG(FNC_ID_REG);
-
-	/* Function personality register */
-	BNAD_GET_REG(FNC_PERS_REG);
-
-	/* Operation mode register */
-	BNAD_GET_REG(OP_MODE);
-
-	/* LPU0 Registers */
-	BNAD_GET_REG(LPU0_MBOX_CTL_REG);
-	BNAD_GET_REG(LPU0_MBOX_CMD_REG);
-	BNAD_GET_REG(LPU0_MBOX_LINK_0REG);
-	BNAD_GET_REG(LPU1_MBOX_LINK_0REG);
-	BNAD_GET_REG(LPU0_MBOX_STATUS_0REG);
-	BNAD_GET_REG(LPU1_MBOX_STATUS_0REG);
-	BNAD_GET_REG(LPU0_ERR_STATUS_REG);
-	BNAD_GET_REG(LPU0_ERR_SET_REG);
-
-	/* LPU1 Registers */
-	BNAD_GET_REG(LPU1_MBOX_CTL_REG);
-	BNAD_GET_REG(LPU1_MBOX_CMD_REG);
-	BNAD_GET_REG(LPU0_MBOX_LINK_1REG);
-	BNAD_GET_REG(LPU1_MBOX_LINK_1REG);
-	BNAD_GET_REG(LPU0_MBOX_STATUS_1REG);
-	BNAD_GET_REG(LPU1_MBOX_STATUS_1REG);
-	BNAD_GET_REG(LPU1_ERR_STATUS_REG);
-	BNAD_GET_REG(LPU1_ERR_SET_REG);
-
-	/* PSS Registers */
-	BNAD_GET_REG(PSS_CTL_REG);
-	BNAD_GET_REG(PSS_ERR_STATUS_REG);
-	BNAD_GET_REG(ERR_STATUS_SET);
-	BNAD_GET_REG(PSS_RAM_ERR_STATUS_REG);
-
-	/* Catapult CPQ Registers */
-	BNAD_GET_REG(HOSTFN0_LPU0_MBOX0_CMD_STAT);
-	BNAD_GET_REG(HOSTFN0_LPU1_MBOX0_CMD_STAT);
-	BNAD_GET_REG(LPU0_HOSTFN0_MBOX0_CMD_STAT);
-	BNAD_GET_REG(LPU1_HOSTFN0_MBOX0_CMD_STAT);
-
-	BNAD_GET_REG(HOSTFN0_LPU0_MBOX1_CMD_STAT);
-	BNAD_GET_REG(HOSTFN0_LPU1_MBOX1_CMD_STAT);
-	BNAD_GET_REG(LPU0_HOSTFN0_MBOX1_CMD_STAT);
-	BNAD_GET_REG(LPU1_HOSTFN0_MBOX1_CMD_STAT);
-
-	BNAD_GET_REG(HOSTFN1_LPU0_MBOX0_CMD_STAT);
-	BNAD_GET_REG(HOSTFN1_LPU1_MBOX0_CMD_STAT);
-	BNAD_GET_REG(LPU0_HOSTFN1_MBOX0_CMD_STAT);
-	BNAD_GET_REG(LPU1_HOSTFN1_MBOX0_CMD_STAT);
-
-	BNAD_GET_REG(HOSTFN1_LPU0_MBOX1_CMD_STAT);
-	BNAD_GET_REG(HOSTFN1_LPU1_MBOX1_CMD_STAT);
-	BNAD_GET_REG(LPU0_HOSTFN1_MBOX1_CMD_STAT);
-	BNAD_GET_REG(LPU1_HOSTFN1_MBOX1_CMD_STAT);
-
-	BNAD_GET_REG(HOSTFN2_LPU0_MBOX0_CMD_STAT);
-	BNAD_GET_REG(HOSTFN2_LPU1_MBOX0_CMD_STAT);
-	BNAD_GET_REG(LPU0_HOSTFN2_MBOX0_CMD_STAT);
-	BNAD_GET_REG(LPU1_HOSTFN2_MBOX0_CMD_STAT);
-
-	BNAD_GET_REG(HOSTFN2_LPU0_MBOX1_CMD_STAT);
-	BNAD_GET_REG(HOSTFN2_LPU1_MBOX1_CMD_STAT);
-	BNAD_GET_REG(LPU0_HOSTFN2_MBOX1_CMD_STAT);
-	BNAD_GET_REG(LPU1_HOSTFN2_MBOX1_CMD_STAT);
-
-	BNAD_GET_REG(HOSTFN3_LPU0_MBOX0_CMD_STAT);
-	BNAD_GET_REG(HOSTFN3_LPU1_MBOX0_CMD_STAT);
-	BNAD_GET_REG(LPU0_HOSTFN3_MBOX0_CMD_STAT);
-	BNAD_GET_REG(LPU1_HOSTFN3_MBOX0_CMD_STAT);
-
-	BNAD_GET_REG(HOSTFN3_LPU0_MBOX1_CMD_STAT);
-	BNAD_GET_REG(HOSTFN3_LPU1_MBOX1_CMD_STAT);
-	BNAD_GET_REG(LPU0_HOSTFN3_MBOX1_CMD_STAT);
-	BNAD_GET_REG(LPU1_HOSTFN3_MBOX1_CMD_STAT);
-
-	/* Host Function Force Parity Error Registers */
-	BNAD_GET_REG(HOSTFN0_LPU_FORCE_PERR);
-	BNAD_GET_REG(HOSTFN1_LPU_FORCE_PERR);
-	BNAD_GET_REG(HOSTFN2_LPU_FORCE_PERR);
-	BNAD_GET_REG(HOSTFN3_LPU_FORCE_PERR);
-
-	/* LL Port[0|1] Halt Mask Registers */
-	BNAD_GET_REG(LL_HALT_MSK_P0);
-	BNAD_GET_REG(LL_HALT_MSK_P1);
-
-	/* LL Port[0|1] Error Mask Registers */
-	BNAD_GET_REG(LL_ERR_MSK_P0);
-	BNAD_GET_REG(LL_ERR_MSK_P1);
-
-	/* EMC FLI Registers */
-	BNAD_GET_REG(FLI_CMD_REG);
-	BNAD_GET_REG(FLI_ADDR_REG);
-	BNAD_GET_REG(FLI_CTL_REG);
-	BNAD_GET_REG(FLI_WRDATA_REG);
-	BNAD_GET_REG(FLI_RDDATA_REG);
-	BNAD_GET_REG(FLI_DEV_STATUS_REG);
-	BNAD_GET_REG(FLI_SIG_WD_REG);
-
-	BNAD_GET_REG(FLI_DEV_VENDOR_REG);
-	BNAD_GET_REG(FLI_ERR_STATUS_REG);
-
-	/* RxAdm 0 Registers */
-	BNAD_GET_REG(RAD0_CTL_REG);
-	BNAD_GET_REG(RAD0_PE_PARM_REG);
-	BNAD_GET_REG(RAD0_BCN_REG);
-	BNAD_GET_REG(RAD0_DEFAULT_REG);
-	BNAD_GET_REG(RAD0_PROMISC_REG);
-	BNAD_GET_REG(RAD0_BCNQ_REG);
-	BNAD_GET_REG(RAD0_DEFAULTQ_REG);
-
-	BNAD_GET_REG(RAD0_ERR_STS);
-	BNAD_GET_REG(RAD0_SET_ERR_STS);
-	BNAD_GET_REG(RAD0_ERR_INT_EN);
-	BNAD_GET_REG(RAD0_FIRST_ERR);
-	BNAD_GET_REG(RAD0_FORCE_ERR);
-
-	BNAD_GET_REG(RAD0_MAC_MAN_1H);
-	BNAD_GET_REG(RAD0_MAC_MAN_1L);
-	BNAD_GET_REG(RAD0_MAC_MAN_2H);
-	BNAD_GET_REG(RAD0_MAC_MAN_2L);
-	BNAD_GET_REG(RAD0_MAC_MAN_3H);
-	BNAD_GET_REG(RAD0_MAC_MAN_3L);
-	BNAD_GET_REG(RAD0_MAC_MAN_4H);
-	BNAD_GET_REG(RAD0_MAC_MAN_4L);
-
-	BNAD_GET_REG(RAD0_LAST4_IP);
-
-	/* RxAdm 1 Registers */
-	BNAD_GET_REG(RAD1_CTL_REG);
-	BNAD_GET_REG(RAD1_PE_PARM_REG);
-	BNAD_GET_REG(RAD1_BCN_REG);
-	BNAD_GET_REG(RAD1_DEFAULT_REG);
-	BNAD_GET_REG(RAD1_PROMISC_REG);
-	BNAD_GET_REG(RAD1_BCNQ_REG);
-	BNAD_GET_REG(RAD1_DEFAULTQ_REG);
-
-	BNAD_GET_REG(RAD1_ERR_STS);
-	BNAD_GET_REG(RAD1_SET_ERR_STS);
-	BNAD_GET_REG(RAD1_ERR_INT_EN);
-
-	/* TxA0 Registers */
-	BNAD_GET_REG(TXA0_CTRL_REG);
-	/* TxA0 TSO Sequence # Registers (RO) */
-	for (i = 0; i < 8; i++) {
-		BNAD_GET_REG(TXA0_TSO_TCP_SEQ_REG(i));
-		BNAD_GET_REG(TXA0_TSO_IP_INFO_REG(i));
-	}
-
-	/* TxA1 Registers */
-	BNAD_GET_REG(TXA1_CTRL_REG);
-	/* TxA1 TSO Sequence # Registers (RO) */
-	for (i = 0; i < 8; i++) {
-		BNAD_GET_REG(TXA1_TSO_TCP_SEQ_REG(i));
-		BNAD_GET_REG(TXA1_TSO_IP_INFO_REG(i));
-	}
-
-	/* RxA Registers */
-	BNAD_GET_REG(RXA0_CTL_REG);
-	BNAD_GET_REG(RXA1_CTL_REG);
-
-	/* PLB0 Registers */
-	BNAD_GET_REG(PLB0_ECM_TIMER_REG);
-	BNAD_GET_REG(PLB0_RL_CTL);
-	for (i = 0; i < 8; i++)
-		BNAD_GET_REG(PLB0_RL_MAX_BC(i));
-	BNAD_GET_REG(PLB0_RL_TU_PRIO);
-	for (i = 0; i < 8; i++)
-		BNAD_GET_REG(PLB0_RL_BYTE_CNT(i));
-	BNAD_GET_REG(PLB0_RL_MIN_REG);
-	BNAD_GET_REG(PLB0_RL_MAX_REG);
-	BNAD_GET_REG(PLB0_EMS_ADD_REG);
-
-	/* PLB1 Registers */
-	BNAD_GET_REG(PLB1_ECM_TIMER_REG);
-	BNAD_GET_REG(PLB1_RL_CTL);
-	for (i = 0; i < 8; i++)
-		BNAD_GET_REG(PLB1_RL_MAX_BC(i));
-	BNAD_GET_REG(PLB1_RL_TU_PRIO);
-	for (i = 0; i < 8; i++)
-		BNAD_GET_REG(PLB1_RL_BYTE_CNT(i));
-	BNAD_GET_REG(PLB1_RL_MIN_REG);
-	BNAD_GET_REG(PLB1_RL_MAX_REG);
-	BNAD_GET_REG(PLB1_EMS_ADD_REG);
-
-	/* HQM Control Register */
-	BNAD_GET_REG(HQM0_CTL_REG);
-	BNAD_GET_REG(HQM0_RXQ_STOP_SEM);
-	BNAD_GET_REG(HQM0_TXQ_STOP_SEM);
-	BNAD_GET_REG(HQM1_CTL_REG);
-	BNAD_GET_REG(HQM1_RXQ_STOP_SEM);
-	BNAD_GET_REG(HQM1_TXQ_STOP_SEM);
-
-	/* LUT Registers */
-	BNAD_GET_REG(LUT0_ERR_STS);
-	BNAD_GET_REG(LUT0_SET_ERR_STS);
-	BNAD_GET_REG(LUT1_ERR_STS);
-	BNAD_GET_REG(LUT1_SET_ERR_STS);
-
-	/* TRC Registers */
-	BNAD_GET_REG(TRC_CTL_REG);
-	BNAD_GET_REG(TRC_MODS_REG);
-	BNAD_GET_REG(TRC_TRGC_REG);
-	BNAD_GET_REG(TRC_CNT1_REG);
-	BNAD_GET_REG(TRC_CNT2_REG);
-	BNAD_GET_REG(TRC_NXTS_REG);
-	BNAD_GET_REG(TRC_DIRR_REG);
-	for (i = 0; i < 10; i++)
-		BNAD_GET_REG(TRC_TRGM_REG(i));
-	for (i = 0; i < 10; i++)
-		BNAD_GET_REG(TRC_NXTM_REG(i));
-	for (i = 0; i < 10; i++)
-		BNAD_GET_REG(TRC_STRM_REG(i));
-
-	spin_unlock_irqrestore(&bnad->bna_lock, flags);
-#undef BNAD_GET_REG
-	return num;
-}
-static int
-bnad_get_regs_len(struct net_device *netdev)
-{
-	int ret = get_regs(netdev_priv(netdev), NULL) * sizeof(u32);
-	return ret;
-}
-
-static void
-bnad_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *buf)
-{
-	memset(buf, 0, bnad_get_regs_len(netdev));
-	get_regs(netdev_priv(netdev), buf);
-}
-
 static void
 bnad_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wolinfo)
 {
@@ -779,8 +462,8 @@ bnad_get_pauseparam(struct net_device *netdev,
 	struct bnad *bnad = netdev_priv(netdev);
 
 	pauseparam->autoneg = 0;
-	pauseparam->rx_pause = bnad->bna.port.pause_config.rx_pause;
-	pauseparam->tx_pause = bnad->bna.port.pause_config.tx_pause;
+	pauseparam->rx_pause = bnad->bna.enet.pause_config.rx_pause;
+	pauseparam->tx_pause = bnad->bna.enet.pause_config.tx_pause;
 }
 
 static int
@@ -795,12 +478,12 @@ bnad_set_pauseparam(struct net_device *netdev,
 		return -EINVAL;
 
 	mutex_lock(&bnad->conf_mutex);
-	if (pauseparam->rx_pause != bnad->bna.port.pause_config.rx_pause ||
-	    pauseparam->tx_pause != bnad->bna.port.pause_config.tx_pause) {
+	if (pauseparam->rx_pause != bnad->bna.enet.pause_config.rx_pause ||
+	    pauseparam->tx_pause != bnad->bna.enet.pause_config.tx_pause) {
 		pause_config.rx_pause = pauseparam->rx_pause;
 		pause_config.tx_pause = pauseparam->tx_pause;
 		spin_lock_irqsave(&bnad->bna_lock, flags);
-		bna_port_pause_config(&bnad->bna.port, &pause_config, NULL);
+		bna_enet_pause_config(&bnad->bna.enet, &pause_config, NULL);
 		spin_unlock_irqrestore(&bnad->bna_lock, flags);
 	}
 	mutex_unlock(&bnad->conf_mutex);
@@ -812,7 +495,7 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 * string)
 {
 	struct bnad *bnad = netdev_priv(netdev);
 	int i, j, q_num;
-	u64 bmap;
+	u32 bmap;
 
 	mutex_lock(&bnad->conf_mutex);
 
@@ -825,9 +508,8 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 * string)
 			       ETH_GSTRING_LEN);
 			string += ETH_GSTRING_LEN;
 		}
-		bmap = (u64)bnad->bna.tx_mod.txf_bmap[0] |
-			((u64)bnad->bna.tx_mod.txf_bmap[1] << 32);
-		for (i = 0; bmap && (i < BFI_LL_TXF_ID_MAX); i++) {
+		bmap = bna_tx_rid_mask(&bnad->bna);
+		for (i = 0; bmap; i++) {
 			if (bmap & 1) {
 				sprintf(string, "txf%d_ucast_octets", i);
 				string += ETH_GSTRING_LEN;
@@ -857,9 +539,8 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 * string)
 			bmap >>= 1;
 		}
 
-		bmap = (u64)bnad->bna.rx_mod.rxf_bmap[0] |
-			((u64)bnad->bna.rx_mod.rxf_bmap[1] << 32);
-		for (i = 0; bmap && (i < BFI_LL_RXF_ID_MAX); i++) {
+		bmap = bna_rx_rid_mask(&bnad->bna);
+		for (i = 0; bmap; i++) {
 			if (bmap & 1) {
 				sprintf(string, "rxf%d_ucast_octets", i);
 				string += ETH_GSTRING_LEN;
@@ -980,18 +661,16 @@ bnad_get_stats_count_locked(struct net_device *netdev)
 {
 	struct bnad *bnad = netdev_priv(netdev);
 	int i, j, count, rxf_active_num = 0, txf_active_num = 0;
-	u64 bmap;
+	u32 bmap;
 
-	bmap = (u64)bnad->bna.tx_mod.txf_bmap[0] |
-			((u64)bnad->bna.tx_mod.txf_bmap[1] << 32);
-	for (i = 0; bmap && (i < BFI_LL_TXF_ID_MAX); i++) {
+	bmap = bna_tx_rid_mask(&bnad->bna);
+	for (i = 0; bmap; i++) {
 		if (bmap & 1)
 			txf_active_num++;
 		bmap >>= 1;
 	}
-	bmap = (u64)bnad->bna.rx_mod.rxf_bmap[0] |
-			((u64)bnad->bna.rx_mod.rxf_bmap[1] << 32);
-	for (i = 0; bmap && (i < BFI_LL_RXF_ID_MAX); i++) {
+	bmap = bna_rx_rid_mask(&bnad->bna);
+	for (i = 0; bmap; i++) {
 		if (bmap & 1)
 			rxf_active_num++;
 		bmap >>= 1;
@@ -1104,7 +783,7 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats,
 	unsigned long flags;
 	struct rtnl_link_stats64 *net_stats64;
 	u64 *stats64;
-	u64 bmap;
+	u32 bmap;
 
 	mutex_lock(&bnad->conf_mutex);
 	if (bnad_get_stats_count_locked(netdev) != stats->n_stats) {
@@ -1135,20 +814,20 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats,
 		buf[bi++] = stats64[i];
 
 	/* Fill hardware stats excluding the rxf/txf into ethtool bufs */
-	stats64 = (u64 *) bnad->stats.bna_stats->hw_stats;
+	stats64 = (u64 *) &bnad->stats.bna_stats->hw_stats;
 	for (i = 0;
-	     i < offsetof(struct bfi_ll_stats, rxf_stats[0]) / sizeof(u64);
+	     i < offsetof(struct bfi_enet_stats, rxf_stats[0]) /
+		sizeof(u64);
 	     i++)
 		buf[bi++] = stats64[i];
 
 	/* Fill txf stats into ethtool buffers */
-	bmap = (u64)bnad->bna.tx_mod.txf_bmap[0] |
-			((u64)bnad->bna.tx_mod.txf_bmap[1] << 32);
-	for (i = 0; bmap && (i < BFI_LL_TXF_ID_MAX); i++) {
+	bmap = bna_tx_rid_mask(&bnad->bna);
+	for (i = 0; bmap; i++) {
 		if (bmap & 1) {
 			stats64 = (u64 *)&bnad->stats.bna_stats->
-						hw_stats->txf_stats[i];
-			for (j = 0; j < sizeof(struct bfi_ll_stats_txf) /
+						hw_stats.txf_stats[i];
+			for (j = 0; j < sizeof(struct bfi_enet_stats_txf) /
 					sizeof(u64); j++)
 				buf[bi++] = stats64[j];
 		}
@@ -1156,13 +835,12 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats,
 	}
 
 	/*  Fill rxf stats into ethtool buffers */
-	bmap = (u64)bnad->bna.rx_mod.rxf_bmap[0] |
-			((u64)bnad->bna.rx_mod.rxf_bmap[1] << 32);
-	for (i = 0; bmap && (i < BFI_LL_RXF_ID_MAX); i++) {
+	bmap = bna_rx_rid_mask(&bnad->bna);
+	for (i = 0; bmap; i++) {
 		if (bmap & 1) {
 			stats64 = (u64 *)&bnad->stats.bna_stats->
-						hw_stats->rxf_stats[i];
-			for (j = 0; j < sizeof(struct bfi_ll_stats_rxf) /
+						hw_stats.rxf_stats[i];
+			for (j = 0; j < sizeof(struct bfi_enet_stats_rxf) /
 					sizeof(u64); j++)
 				buf[bi++] = stats64[j];
 		}
@@ -1192,8 +870,6 @@ static struct ethtool_ops bnad_ethtool_ops = {
 	.get_settings = bnad_get_settings,
 	.set_settings = bnad_set_settings,
 	.get_drvinfo = bnad_get_drvinfo,
-	.get_regs_len = bnad_get_regs_len,
-	.get_regs = bnad_get_regs,
 	.get_wol = bnad_get_wol,
 	.get_link = ethtool_op_get_link,
 	.get_coalesce = bnad_get_coalesce,
diff --git a/drivers/net/bna/cna.h b/drivers/net/ethernet/brocade/bna/cna.h
index a679e038747b..50fce15feacc 100644
--- a/drivers/net/bna/cna.h
+++ b/drivers/net/ethernet/brocade/bna/cna.h
@@ -40,7 +40,7 @@
 
 extern char bfa_version[];
 
-#define	CNA_FW_FILE_CT	"ctfw_cna.bin"
+#define	CNA_FW_FILE_CT	"ctfw.bin"
 #define FC_SYMNAME_MAX	256	/*!< max name server symbolic name size */
 
 #pragma pack(1)
@@ -77,4 +77,33 @@ typedef struct mac { u8 mac[MAC_ADDRLEN]; } mac_t;
 	}								\
 }
 
+/*
+ * bfa_q_deq_tail - dequeue an element from tail of the queue
+ */
+#define bfa_q_deq_tail(_q, _qe) {					\
+	if (!list_empty(_q)) {						\
+		*((struct list_head **) (_qe)) = bfa_q_prev(_q);	\
+		bfa_q_next(bfa_q_prev(*((struct list_head **) _qe))) =  \
+						(struct list_head *) (_q); \
+		bfa_q_prev(_q) = bfa_q_prev(*(struct list_head **) _qe);\
+		bfa_q_qe_init(*((struct list_head **) _qe));		\
+	} else {							\
+		*((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+	}								\
+}
+
+/*
+ * bfa_add_tail_head - enqueue an element at the head of queue
+ */
+#define bfa_q_enq_head(_q, _qe) {					\
+	if (!(bfa_q_next(_qe) == NULL) && (bfa_q_prev(_qe) == NULL))	\
+		pr_err("Assertion failure: %s:%d: %d",			\
+			__FILE__, __LINE__,				\
+		(bfa_q_next(_qe) == NULL) && (bfa_q_prev(_qe) == NULL));\
+	bfa_q_next(_qe) = bfa_q_next(_q);				\
+	bfa_q_prev(_qe) = (struct list_head *) (_q);			\
+	bfa_q_prev(bfa_q_next(_q)) = (struct list_head *) (_qe);	\
+	bfa_q_next(_q) = (struct list_head *) (_qe);			\
+}
+
 #endif /* __CNA_H__ */
diff --git a/drivers/net/bna/cna_fwimg.c b/drivers/net/ethernet/brocade/bna/cna_fwimg.c
index e8f4ecd9ebb5..e8f4ecd9ebb5 100644
--- a/drivers/net/bna/cna_fwimg.c
+++ b/drivers/net/ethernet/brocade/bna/cna_fwimg.c
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
new file mode 100644
index 000000000000..c00e706ab58a
--- /dev/null
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -0,0 +1,44 @@
+#
+# Atmel device configuration
+#
+
+config HAVE_NET_MACB
+	bool
+
+config NET_ATMEL
+	bool "Atmel devices"
+	depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  If unsure, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the remaining Atmel network card questions. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_ATMEL
+
+config ARM_AT91_ETHER
+	tristate "AT91RM9200 Ethernet support"
+	depends on ARM && ARCH_AT91RM9200
+	select MII
+	---help---
+	  If you wish to compile a kernel for the AT91RM9200 and enable
+	  ethernet support, then you should always answer Y to this.
+
+config MACB
+	tristate "Atmel MACB support"
+	depends on HAVE_NET_MACB
+	select PHYLIB
+	---help---
+	  The Atmel MACB ethernet interface is found on many AT32 and AT91
+	  parts. Say Y to include support for the MACB chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macb.
+
+endif # NET_ATMEL
diff --git a/drivers/net/ethernet/cadence/Makefile b/drivers/net/ethernet/cadence/Makefile
new file mode 100644
index 000000000000..9068b8331ed1
--- /dev/null
+++ b/drivers/net/ethernet/cadence/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Atmel network device drivers.
+#
+
+obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
+obj-$(CONFIG_MACB) += macb.o
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 29dc43523cec..1b0ba8c819f7 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -968,7 +968,7 @@ static const struct net_device_ops at91ether_netdev_ops = {
 	.ndo_stop		= at91ether_close,
 	.ndo_start_xmit		= at91ether_start_xmit,
 	.ndo_get_stats		= at91ether_stats,
-	.ndo_set_multicast_list	= at91ether_set_multicast_list,
+	.ndo_set_rx_mode	= at91ether_set_multicast_list,
 	.ndo_set_mac_address	= set_mac_address,
 	.ndo_do_ioctl		= at91ether_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h
index 353f4dab62be..353f4dab62be 100644
--- a/drivers/net/arm/at91_ether.h
+++ b/drivers/net/ethernet/cadence/at91_ether.h
diff --git a/drivers/net/macb.c b/drivers/net/ethernet/cadence/macb.c
index 0fcdc25699d8..a437b46e5490 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -322,6 +322,9 @@ static void macb_tx(struct macb *bp)
 		for (i = 0; i < TX_RING_SIZE; i++)
 			bp->tx_ring[i].ctrl = MACB_BIT(TX_USED);
 
+		/* Add wrap bit */
+		bp->tx_ring[TX_RING_SIZE - 1].ctrl |= MACB_BIT(TX_WRAP);
+
 		/* free transmit buffer in upper layer*/
 		for (tail = bp->tx_tail; tail != head; tail = NEXT_TX(tail)) {
 			struct ring_info *rp = &bp->tx_skb[tail];
@@ -1103,7 +1106,7 @@ static const struct net_device_ops macb_netdev_ops = {
 	.ndo_open		= macb_open,
 	.ndo_stop		= macb_close,
 	.ndo_start_xmit		= macb_start_xmit,
-	.ndo_set_multicast_list	= macb_set_rx_mode,
+	.ndo_set_rx_mode	= macb_set_rx_mode,
 	.ndo_get_stats		= macb_get_stats,
 	.ndo_do_ioctl		= macb_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/macb.h b/drivers/net/ethernet/cadence/macb.h
index d3212f6db703..d3212f6db703 100644
--- a/drivers/net/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig
new file mode 100644
index 000000000000..2de50f95798f
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/Kconfig
@@ -0,0 +1,107 @@
+#
+# Chelsio device configuration
+#
+
+config NET_VENDOR_CHELSIO
+	bool "Chelsio devices"
+	default y
+	depends on PCI || INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Chelsio devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_CHELSIO
+
+config CHELSIO_T1
+	tristate "Chelsio 10Gb Ethernet support"
+	depends on PCI
+	select CRC32
+	select MDIO
+	---help---
+	  This driver supports Chelsio gigabit and 10-gigabit
+	  Ethernet cards. More information about adapter features and
+	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cxgb.
+
+config CHELSIO_T1_1G
+	bool "Chelsio gigabit Ethernet support"
+	depends on CHELSIO_T1
+	---help---
+	  Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
+	  are using only 10G cards say 'N' here.
+
+config CHELSIO_T3
+	tristate "Chelsio Communications T3 10Gb Ethernet support"
+	depends on PCI && INET
+	select FW_LOADER
+	select MDIO
+	---help---
+	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+	  adapters.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cxgb3.
+
+config CHELSIO_T4
+	tristate "Chelsio Communications T4 Ethernet support"
+	depends on PCI
+	select FW_LOADER
+	select MDIO
+	---help---
+	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+	  adapters.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module choose M here; the module
+	  will be called cxgb4.
+
+config CHELSIO_T4VF
+	tristate "Chelsio Communications T4 Virtual Function Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+	  adapters with PCI-E SR-IOV Virtual Functions.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module choose M here; the module
+	  will be called cxgb4vf.
+
+endif # NET_VENDOR_CHELSIO
diff --git a/drivers/net/ethernet/chelsio/Makefile b/drivers/net/ethernet/chelsio/Makefile
new file mode 100644
index 000000000000..390510b5e90f
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Chelsio network device drivers.
+#
+
+obj-$(CONFIG_CHELSIO_T1) += cxgb/
+obj-$(CONFIG_CHELSIO_T3) += cxgb3/
+obj-$(CONFIG_CHELSIO_T4) += cxgb4/
+obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
diff --git a/drivers/net/chelsio/Makefile b/drivers/net/ethernet/chelsio/cxgb/Makefile
index 57a4b262fd3f..57a4b262fd3f 100644
--- a/drivers/net/chelsio/Makefile
+++ b/drivers/net/ethernet/chelsio/cxgb/Makefile
diff --git a/drivers/net/chelsio/common.h b/drivers/net/ethernet/chelsio/cxgb/common.h
index 5ccbed1784d2..5ccbed1784d2 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/ethernet/chelsio/cxgb/common.h
diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/ethernet/chelsio/cxgb/cphy.h
index 1f095a9fc739..1f095a9fc739 100644
--- a/drivers/net/chelsio/cphy.h
+++ b/drivers/net/ethernet/chelsio/cxgb/cphy.h
diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/ethernet/chelsio/cxgb/cpl5_cmd.h
index e36d45b78cc7..e36d45b78cc7 100644
--- a/drivers/net/chelsio/cpl5_cmd.h
+++ b/drivers/net/ethernet/chelsio/cxgb/cpl5_cmd.h
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
index 3edbbc4c5112..9993f4f15433 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
@@ -964,7 +964,7 @@ static const struct net_device_ops cxgb_netdev_ops = {
 	.ndo_start_xmit		= t1_start_xmit,
 	.ndo_get_stats		= t1_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= t1_set_rxmode,
+	.ndo_set_rx_mode	= t1_set_rxmode,
 	.ndo_do_ioctl		= t1_ioctl,
 	.ndo_change_mtu		= t1_change_mtu,
 	.ndo_set_mac_address	= t1_set_mac_addr,
diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/ethernet/chelsio/cxgb/elmer0.h
index eef655c827d9..eef655c827d9 100644
--- a/drivers/net/chelsio/elmer0.h
+++ b/drivers/net/ethernet/chelsio/cxgb/elmer0.h
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/ethernet/chelsio/cxgb/espi.c
index 639ff1955739..639ff1955739 100644
--- a/drivers/net/chelsio/espi.c
+++ b/drivers/net/ethernet/chelsio/cxgb/espi.c
diff --git a/drivers/net/chelsio/espi.h b/drivers/net/ethernet/chelsio/cxgb/espi.h
index 5694aad4fbc0..5694aad4fbc0 100644
--- a/drivers/net/chelsio/espi.h
+++ b/drivers/net/ethernet/chelsio/cxgb/espi.h
diff --git a/drivers/net/chelsio/fpga_defs.h b/drivers/net/ethernet/chelsio/cxgb/fpga_defs.h
index ccdb2bc9ae98..ccdb2bc9ae98 100644
--- a/drivers/net/chelsio/fpga_defs.h
+++ b/drivers/net/ethernet/chelsio/cxgb/fpga_defs.h
diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/ethernet/chelsio/cxgb/gmac.h
index d42337457cf7..d42337457cf7 100644
--- a/drivers/net/chelsio/gmac.h
+++ b/drivers/net/ethernet/chelsio/cxgb/gmac.h
diff --git a/drivers/net/chelsio/mv88e1xxx.c b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c
index 71018a4fdf15..71018a4fdf15 100644
--- a/drivers/net/chelsio/mv88e1xxx.c
+++ b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c
diff --git a/drivers/net/chelsio/mv88e1xxx.h b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.h
index 967cc4286359..967cc4286359 100644
--- a/drivers/net/chelsio/mv88e1xxx.h
+++ b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.h
diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/ethernet/chelsio/cxgb/mv88x201x.c
index f7136b2fd1e5..f7136b2fd1e5 100644
--- a/drivers/net/chelsio/mv88x201x.c
+++ b/drivers/net/ethernet/chelsio/cxgb/mv88x201x.c
diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/ethernet/chelsio/cxgb/my3126.c
index a683fd3bb624..a683fd3bb624 100644
--- a/drivers/net/chelsio/my3126.c
+++ b/drivers/net/ethernet/chelsio/cxgb/my3126.c
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/ethernet/chelsio/cxgb/pm3393.c
index 40c7b93ababc..40c7b93ababc 100644
--- a/drivers/net/chelsio/pm3393.c
+++ b/drivers/net/ethernet/chelsio/cxgb/pm3393.c
diff --git a/drivers/net/chelsio/regs.h b/drivers/net/ethernet/chelsio/cxgb/regs.h
index c80bf4d6d0a6..c80bf4d6d0a6 100644
--- a/drivers/net/chelsio/regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb/regs.h
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/ethernet/chelsio/cxgb/sge.c
index e9a03fffef15..e9a03fffef15 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb/sge.c
diff --git a/drivers/net/chelsio/sge.h b/drivers/net/ethernet/chelsio/cxgb/sge.h
index e03980bcdd65..e03980bcdd65 100644
--- a/drivers/net/chelsio/sge.h
+++ b/drivers/net/ethernet/chelsio/cxgb/sge.h
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/ethernet/chelsio/cxgb/subr.c
index 8a43c7e19701..8a43c7e19701 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/ethernet/chelsio/cxgb/subr.c
diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/ethernet/chelsio/cxgb/suni1x10gexp_regs.h
index d0f87d82566a..d0f87d82566a 100644
--- a/drivers/net/chelsio/suni1x10gexp_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb/suni1x10gexp_regs.h
diff --git a/drivers/net/chelsio/tp.c b/drivers/net/ethernet/chelsio/cxgb/tp.c
index 8bed4a59e65f..8bed4a59e65f 100644
--- a/drivers/net/chelsio/tp.c
+++ b/drivers/net/ethernet/chelsio/cxgb/tp.c
diff --git a/drivers/net/chelsio/tp.h b/drivers/net/ethernet/chelsio/cxgb/tp.h
index dfd8ce25106a..dfd8ce25106a 100644
--- a/drivers/net/chelsio/tp.h
+++ b/drivers/net/ethernet/chelsio/cxgb/tp.h
diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/ethernet/chelsio/cxgb/vsc7326.c
index b0cb388f5e12..b0cb388f5e12 100644
--- a/drivers/net/chelsio/vsc7326.c
+++ b/drivers/net/ethernet/chelsio/cxgb/vsc7326.c
diff --git a/drivers/net/chelsio/vsc7326_reg.h b/drivers/net/ethernet/chelsio/cxgb/vsc7326_reg.h
index 479edbcabe68..479edbcabe68 100644
--- a/drivers/net/chelsio/vsc7326_reg.h
+++ b/drivers/net/ethernet/chelsio/cxgb/vsc7326_reg.h
diff --git a/drivers/net/cxgb3/Makefile b/drivers/net/ethernet/chelsio/cxgb3/Makefile
index 29aff78c7820..29aff78c7820 100644
--- a/drivers/net/cxgb3/Makefile
+++ b/drivers/net/ethernet/chelsio/cxgb3/Makefile
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
index 8b395b537330..8b395b537330 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/ethernet/chelsio/cxgb3/ael1002.c
index 2028da95afa1..2028da95afa1 100644
--- a/drivers/net/cxgb3/ael1002.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/ael1002.c
diff --git a/drivers/net/cxgb3/aq100x.c b/drivers/net/ethernet/chelsio/cxgb3/aq100x.c
index 341b7ef1508f..341b7ef1508f 100644
--- a/drivers/net/cxgb3/aq100x.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/aq100x.c
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/ethernet/chelsio/cxgb3/common.h
index df01b6343241..df01b6343241 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/common.h
diff --git a/drivers/net/cxgb3/cxgb3_ctl_defs.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_ctl_defs.h
index 369fe711fd7f..369fe711fd7f 100644
--- a/drivers/net/cxgb3/cxgb3_ctl_defs.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_ctl_defs.h
diff --git a/drivers/net/cxgb3/cxgb3_defs.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h
index 920d918ed193..920d918ed193 100644
--- a/drivers/net/cxgb3/cxgb3_defs.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h
diff --git a/drivers/net/cxgb3/cxgb3_ioctl.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_ioctl.h
index b19e4376ba76..b19e4376ba76 100644
--- a/drivers/net/cxgb3/cxgb3_ioctl.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_ioctl.h
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index 93b41a7ac175..29e0e4243231 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -3153,7 +3153,7 @@ static const struct net_device_ops cxgb_netdev_ops = {
 	.ndo_start_xmit		= t3_eth_xmit,
 	.ndo_get_stats		= cxgb_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= cxgb_set_rxmode,
+	.ndo_set_rx_mode	= cxgb_set_rxmode,
 	.ndo_do_ioctl		= cxgb_ioctl,
 	.ndo_change_mtu		= cxgb_change_mtu,
 	.ndo_set_mac_address	= cxgb_set_mac_addr,
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
index 805076c54f1b..805076c54f1b 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.h
index 929c298115ca..929c298115ca 100644
--- a/drivers/net/cxgb3/cxgb3_offload.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.h
diff --git a/drivers/net/cxgb3/firmware_exports.h b/drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h
index 0d9b0e6dccff..0d9b0e6dccff 100644
--- a/drivers/net/cxgb3/firmware_exports.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h
diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/ethernet/chelsio/cxgb3/l2t.c
index f452c4003253..f452c4003253 100644
--- a/drivers/net/cxgb3/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/l2t.c
diff --git a/drivers/net/cxgb3/l2t.h b/drivers/net/ethernet/chelsio/cxgb3/l2t.h
index 7a12d52ed4fc..7a12d52ed4fc 100644
--- a/drivers/net/cxgb3/l2t.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/l2t.h
diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/ethernet/chelsio/cxgb3/mc5.c
index e13b7fe9d082..e13b7fe9d082 100644
--- a/drivers/net/cxgb3/mc5.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/mc5.c
diff --git a/drivers/net/cxgb3/regs.h b/drivers/net/ethernet/chelsio/cxgb3/regs.h
index 6990f6c65221..6990f6c65221 100644
--- a/drivers/net/cxgb3/regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/regs.h
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index d6fa1777a343..d6fa1777a343 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
diff --git a/drivers/net/cxgb3/sge_defs.h b/drivers/net/ethernet/chelsio/cxgb3/sge_defs.h
index 29b6c800b238..29b6c800b238 100644
--- a/drivers/net/cxgb3/sge_defs.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge_defs.h
diff --git a/drivers/net/cxgb3/t3_cpl.h b/drivers/net/ethernet/chelsio/cxgb3/t3_cpl.h
index 852c399a8b0a..852c399a8b0a 100644
--- a/drivers/net/cxgb3/t3_cpl.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_cpl.h
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
index 44ac2f40b644..44ac2f40b644 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
diff --git a/drivers/net/cxgb3/t3cdev.h b/drivers/net/ethernet/chelsio/cxgb3/t3cdev.h
index 705713b56636..705713b56636 100644
--- a/drivers/net/cxgb3/t3cdev.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3cdev.h
diff --git a/drivers/net/cxgb3/version.h b/drivers/net/ethernet/chelsio/cxgb3/version.h
index 8bda06e366c8..8bda06e366c8 100644
--- a/drivers/net/cxgb3/version.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/version.h
diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/ethernet/chelsio/cxgb3/vsc8211.c
index 4f9a1c2724f4..4f9a1c2724f4 100644
--- a/drivers/net/cxgb3/vsc8211.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/vsc8211.c
diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/ethernet/chelsio/cxgb3/xgmac.c
index 3af19a550372..3af19a550372 100644
--- a/drivers/net/cxgb3/xgmac.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/xgmac.c
diff --git a/drivers/net/cxgb4/Makefile b/drivers/net/ethernet/chelsio/cxgb4/Makefile
index 498667487f52..498667487f52 100644
--- a/drivers/net/cxgb4/Makefile
+++ b/drivers/net/ethernet/chelsio/cxgb4/Makefile
diff --git a/drivers/net/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 223a7f72343b..223a7f72343b 100644
--- a/drivers/net/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index c9957b7f17b5..90b4921cac9b 100644
--- a/drivers/net/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -41,6 +41,7 @@
 #include <linux/err.h>
 #include <linux/etherdevice.h>
 #include <linux/firmware.h>
+#include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <linux/init.h>
 #include <linux/log2.h>
@@ -3639,6 +3640,8 @@ static int __devinit init_one(struct pci_dev *pdev,
 		netdev->features |= netdev->hw_features | highdma;
 		netdev->vlan_features = netdev->features & VLAN_FEAT;
 
+		netdev->priv_flags |= IFF_UNICAST_FLT;
+
 		netdev->netdev_ops = &cxgb4_netdev_ops;
 		SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops);
 	}
diff --git a/drivers/net/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index b1d39b8d141a..b1d39b8d141a 100644
--- a/drivers/net/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
diff --git a/drivers/net/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
index a2d323c473f8..a2d323c473f8 100644
--- a/drivers/net/cxgb4/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
diff --git a/drivers/net/cxgb4/l2t.h b/drivers/net/ethernet/chelsio/cxgb4/l2t.h
index 02b31d0c6410..02b31d0c6410 100644
--- a/drivers/net/cxgb4/l2t.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.h
diff --git a/drivers/net/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 56adf448b9fe..56adf448b9fe 100644
--- a/drivers/net/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index d1ec111aebd8..d1ec111aebd8 100644
--- a/drivers/net/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
diff --git a/drivers/net/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
index c26b455f37de..c26b455f37de 100644
--- a/drivers/net/cxgb4/t4_hw.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
diff --git a/drivers/net/cxgb4/t4_msg.h b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
index eb71b8250b91..eb71b8250b91 100644
--- a/drivers/net/cxgb4/t4_msg.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
diff --git a/drivers/net/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index 0adc5bcec7c4..0adc5bcec7c4 100644
--- a/drivers/net/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
diff --git a/drivers/net/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index edcfd7ec7802..edcfd7ec7802 100644
--- a/drivers/net/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
diff --git a/drivers/net/cxgb4vf/Makefile b/drivers/net/ethernet/chelsio/cxgb4vf/Makefile
index d72ee26cb4c7..d72ee26cb4c7 100644
--- a/drivers/net/cxgb4vf/Makefile
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/Makefile
diff --git a/drivers/net/cxgb4vf/adapter.h b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h
index 594334d5c711..594334d5c711 100644
--- a/drivers/net/cxgb4vf/adapter.h
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index ec799139dfe2..da9072bfca8b 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2625,6 +2625,8 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		if (pci_using_dac)
 			netdev->features |= NETIF_F_HIGHDMA;
 
+		netdev->priv_flags |= IFF_UNICAST_FLT;
+
 		netdev->netdev_ops = &cxgb4vf_netdev_ops;
 		SET_ETHTOOL_OPS(netdev, &cxgb4vf_ethtool_ops);
 
diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
index cffb328c46c3..cffb328c46c3 100644
--- a/drivers/net/cxgb4vf/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
diff --git a/drivers/net/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
index a65c80aed1f2..a65c80aed1f2 100644
--- a/drivers/net/cxgb4vf/t4vf_common.h
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
diff --git a/drivers/net/cxgb4vf/t4vf_defs.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_defs.h
index c7b127d93767..c7b127d93767 100644
--- a/drivers/net/cxgb4vf/t4vf_defs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_defs.h
diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
index fe3fd3dad6f7..fe3fd3dad6f7 100644
--- a/drivers/net/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
new file mode 100644
index 000000000000..e0cacf662914
--- /dev/null
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -0,0 +1,29 @@
+#
+# Cirrus network device configuration
+#
+
+config NET_VENDOR_CIRRUS
+	bool "Cirrus devices"
+	default y
+	depends on ARM && ARCH_EP93XX
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Cirrus cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_CIRRUS
+
+config EP93XX_ETH
+	tristate "EP93xx Ethernet support"
+	depends on ARM && ARCH_EP93XX
+	select MII
+	help
+	  This is a driver for the ethernet hardware included in EP93xx CPUs.
+	  Say Y if you are building a kernel for EP93xx based devices.
+
+endif # NET_VENDOR_CIRRUS
diff --git a/drivers/net/ethernet/cirrus/Makefile b/drivers/net/ethernet/cirrus/Makefile
new file mode 100644
index 000000000000..9905ea20f9ff
--- /dev/null
+++ b/drivers/net/ethernet/cirrus/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Cirrus network device drivers.
+#
+
+obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/ethernet/cirrus/ep93xx_eth.c
index 4317af8d2f0a..4317af8d2f0a 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/ethernet/cirrus/ep93xx_eth.c
diff --git a/drivers/net/ethernet/cisco/Kconfig b/drivers/net/ethernet/cisco/Kconfig
new file mode 100644
index 000000000000..94606f7ee13a
--- /dev/null
+++ b/drivers/net/ethernet/cisco/Kconfig
@@ -0,0 +1,23 @@
+#
+# Cisco device configuration
+#
+
+config NET_VENDOR_CISCO
+	bool "Cisco devices"
+	default y
+	depends on PCI && INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Cisco cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_CISCO
+
+source "drivers/net/ethernet/cisco/enic/Kconfig"
+
+endif # NET_VENDOR_CISCO
diff --git a/drivers/net/ethernet/cisco/Makefile b/drivers/net/ethernet/cisco/Makefile
new file mode 100644
index 000000000000..6c7437bc4a92
--- /dev/null
+++ b/drivers/net/ethernet/cisco/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Cisco device drivers.
+#
+
+obj-$(CONFIG_ENIC) += enic/
diff --git a/drivers/net/ethernet/cisco/enic/Kconfig b/drivers/net/ethernet/cisco/enic/Kconfig
new file mode 100644
index 000000000000..9cc706a6cffd
--- /dev/null
+++ b/drivers/net/ethernet/cisco/enic/Kconfig
@@ -0,0 +1,9 @@
+#
+# Cisco device configuration
+#
+
+config ENIC
+	tristate "Cisco VIC Ethernet NIC Support"
+	depends on PCI && INET
+	---help---
+	  This enables the support for the Cisco VIC Ethernet card.
diff --git a/drivers/net/enic/Makefile b/drivers/net/ethernet/cisco/enic/Makefile
index 9d4974bba247..9d4974bba247 100644
--- a/drivers/net/enic/Makefile
+++ b/drivers/net/ethernet/cisco/enic/Makefile
diff --git a/drivers/net/enic/cq_desc.h b/drivers/net/ethernet/cisco/enic/cq_desc.h
index d6dd1b4edf6e..d6dd1b4edf6e 100644
--- a/drivers/net/enic/cq_desc.h
+++ b/drivers/net/ethernet/cisco/enic/cq_desc.h
diff --git a/drivers/net/enic/cq_enet_desc.h b/drivers/net/ethernet/cisco/enic/cq_enet_desc.h
index c2c0680a1146..c2c0680a1146 100644
--- a/drivers/net/enic/cq_enet_desc.h
+++ b/drivers/net/ethernet/cisco/enic/cq_enet_desc.h
diff --git a/drivers/net/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h
index ce76d9a8ca6e..ce76d9a8ca6e 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/ethernet/cisco/enic/enic.h
diff --git a/drivers/net/enic/enic_dev.c b/drivers/net/ethernet/cisco/enic/enic_dev.c
index fd6247b3c0ee..fd6247b3c0ee 100644
--- a/drivers/net/enic/enic_dev.c
+++ b/drivers/net/ethernet/cisco/enic/enic_dev.c
diff --git a/drivers/net/enic/enic_dev.h b/drivers/net/ethernet/cisco/enic/enic_dev.h
index ff8e87fdfc1d..ff8e87fdfc1d 100644
--- a/drivers/net/enic/enic_dev.h
+++ b/drivers/net/ethernet/cisco/enic/enic_dev.h
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 67a27cd304dd..c751c25d301e 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/if.h>
 #include <linux/if_ether.h>
 #include <linux/if_vlan.h>
 #include <linux/ethtool.h>
@@ -2103,7 +2104,6 @@ static const struct net_device_ops enic_netdev_dynamic_ops = {
 	.ndo_get_stats64	= enic_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_rx_mode	= enic_set_rx_mode,
-	.ndo_set_multicast_list	= enic_set_rx_mode,
 	.ndo_set_mac_address	= enic_set_mac_address_dynamic,
 	.ndo_change_mtu		= enic_change_mtu,
 	.ndo_vlan_rx_add_vid	= enic_vlan_rx_add_vid,
@@ -2125,7 +2125,6 @@ static const struct net_device_ops enic_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= enic_set_mac_address,
 	.ndo_set_rx_mode	= enic_set_rx_mode,
-	.ndo_set_multicast_list	= enic_set_rx_mode,
 	.ndo_change_mtu		= enic_change_mtu,
 	.ndo_vlan_rx_add_vid	= enic_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= enic_vlan_rx_kill_vid,
@@ -2442,6 +2441,8 @@ static int __devinit enic_probe(struct pci_dev *pdev,
 	if (using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
 	err = register_netdev(netdev);
 	if (err) {
 		dev_err(dev, "Cannot register net device, aborting\n");
diff --git a/drivers/net/enic/enic_pp.c b/drivers/net/ethernet/cisco/enic/enic_pp.c
index ffaa75dd1ded..ffaa75dd1ded 100644
--- a/drivers/net/enic/enic_pp.c
+++ b/drivers/net/ethernet/cisco/enic/enic_pp.c
diff --git a/drivers/net/enic/enic_pp.h b/drivers/net/ethernet/cisco/enic/enic_pp.h
index 699e365a944d..699e365a944d 100644
--- a/drivers/net/enic/enic_pp.h
+++ b/drivers/net/ethernet/cisco/enic/enic_pp.h
diff --git a/drivers/net/enic/enic_res.c b/drivers/net/ethernet/cisco/enic/enic_res.c
index 4a35367de790..4a35367de790 100644
--- a/drivers/net/enic/enic_res.c
+++ b/drivers/net/ethernet/cisco/enic/enic_res.c
diff --git a/drivers/net/enic/enic_res.h b/drivers/net/ethernet/cisco/enic/enic_res.h
index 25be2734c3fe..25be2734c3fe 100644
--- a/drivers/net/enic/enic_res.h
+++ b/drivers/net/ethernet/cisco/enic/enic_res.h
diff --git a/drivers/net/enic/rq_enet_desc.h b/drivers/net/ethernet/cisco/enic/rq_enet_desc.h
index e6dd30988d6f..e6dd30988d6f 100644
--- a/drivers/net/enic/rq_enet_desc.h
+++ b/drivers/net/ethernet/cisco/enic/rq_enet_desc.h
diff --git a/drivers/net/enic/vnic_cq.c b/drivers/net/ethernet/cisco/enic/vnic_cq.c
index 0daa1c7073cb..0daa1c7073cb 100644
--- a/drivers/net/enic/vnic_cq.c
+++ b/drivers/net/ethernet/cisco/enic/vnic_cq.c
diff --git a/drivers/net/enic/vnic_cq.h b/drivers/net/ethernet/cisco/enic/vnic_cq.h
index 579315cbe803..579315cbe803 100644
--- a/drivers/net/enic/vnic_cq.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_cq.h
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/ethernet/cisco/enic/vnic_dev.c
index 8c4c8cf486f6..8c4c8cf486f6 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/ethernet/cisco/enic/vnic_dev.c
diff --git a/drivers/net/enic/vnic_dev.h b/drivers/net/ethernet/cisco/enic/vnic_dev.h
index 852b698fbe7d..852b698fbe7d 100644
--- a/drivers/net/enic/vnic_dev.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_dev.h
diff --git a/drivers/net/enic/vnic_devcmd.h b/drivers/net/ethernet/cisco/enic/vnic_devcmd.h
index 8025e8808d61..8025e8808d61 100644
--- a/drivers/net/enic/vnic_devcmd.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_devcmd.h
diff --git a/drivers/net/enic/vnic_enet.h b/drivers/net/ethernet/cisco/enic/vnic_enet.h
index 609542848e02..609542848e02 100644
--- a/drivers/net/enic/vnic_enet.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_enet.h
diff --git a/drivers/net/enic/vnic_intr.c b/drivers/net/ethernet/cisco/enic/vnic_intr.c
index 0ca107f7bc8c..0ca107f7bc8c 100644
--- a/drivers/net/enic/vnic_intr.c
+++ b/drivers/net/ethernet/cisco/enic/vnic_intr.c
diff --git a/drivers/net/enic/vnic_intr.h b/drivers/net/ethernet/cisco/enic/vnic_intr.h
index 2b1636392294..2b1636392294 100644
--- a/drivers/net/enic/vnic_intr.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_intr.h
diff --git a/drivers/net/enic/vnic_nic.h b/drivers/net/ethernet/cisco/enic/vnic_nic.h
index 995a50dd4c99..995a50dd4c99 100644
--- a/drivers/net/enic/vnic_nic.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_nic.h
diff --git a/drivers/net/enic/vnic_resource.h b/drivers/net/ethernet/cisco/enic/vnic_resource.h
index e0a73f1ca6f4..e0a73f1ca6f4 100644
--- a/drivers/net/enic/vnic_resource.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_resource.h
diff --git a/drivers/net/enic/vnic_rq.c b/drivers/net/ethernet/cisco/enic/vnic_rq.c
index 34105e0951a5..34105e0951a5 100644
--- a/drivers/net/enic/vnic_rq.c
+++ b/drivers/net/ethernet/cisco/enic/vnic_rq.c
diff --git a/drivers/net/enic/vnic_rq.h b/drivers/net/ethernet/cisco/enic/vnic_rq.h
index 2056586f4d4b..2056586f4d4b 100644
--- a/drivers/net/enic/vnic_rq.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_rq.h
diff --git a/drivers/net/enic/vnic_rss.h b/drivers/net/ethernet/cisco/enic/vnic_rss.h
index fa421baf45b8..fa421baf45b8 100644
--- a/drivers/net/enic/vnic_rss.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_rss.h
diff --git a/drivers/net/enic/vnic_stats.h b/drivers/net/ethernet/cisco/enic/vnic_stats.h
index 77750ec93954..77750ec93954 100644
--- a/drivers/net/enic/vnic_stats.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_stats.h
diff --git a/drivers/net/enic/vnic_vic.c b/drivers/net/ethernet/cisco/enic/vnic_vic.c
index 24ef8cd40545..24ef8cd40545 100644
--- a/drivers/net/enic/vnic_vic.c
+++ b/drivers/net/ethernet/cisco/enic/vnic_vic.c
diff --git a/drivers/net/enic/vnic_vic.h b/drivers/net/ethernet/cisco/enic/vnic_vic.h
index 9ef81f148351..9ef81f148351 100644
--- a/drivers/net/enic/vnic_vic.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_vic.h
diff --git a/drivers/net/enic/vnic_wq.c b/drivers/net/ethernet/cisco/enic/vnic_wq.c
index df61bd932ea6..df61bd932ea6 100644
--- a/drivers/net/enic/vnic_wq.c
+++ b/drivers/net/ethernet/cisco/enic/vnic_wq.c
diff --git a/drivers/net/enic/vnic_wq.h b/drivers/net/ethernet/cisco/enic/vnic_wq.h
index 7dd937ac11c2..7dd937ac11c2 100644
--- a/drivers/net/enic/vnic_wq.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_wq.h
diff --git a/drivers/net/enic/wq_enet_desc.h b/drivers/net/ethernet/cisco/enic/wq_enet_desc.h
index c7021e3a631f..c7021e3a631f 100644
--- a/drivers/net/enic/wq_enet_desc.h
+++ b/drivers/net/ethernet/cisco/enic/wq_enet_desc.h
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
new file mode 100644
index 000000000000..73c5d2080f24
--- /dev/null
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -0,0 +1,23 @@
+#
+# Davicom device configuration
+#
+
+config DM9000
+	tristate "DM9000 support"
+	depends on ARM || BLACKFIN || MIPS
+	select CRC32
+	select MII
+	---help---
+	  Support for DM9000 chipset.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called dm9000.
+
+config DM9000_FORCE_SIMPLE_PHY_POLL
+	bool "Force simple NSR based PHY polling"
+	depends on DM9000
+	---help---
+	  This configuration forces the DM9000 to use the NSR's LinkStatus
+	  bit to determine if the link is up or down instead of the more
+	  costly MII PHY reads. Note, this will not work if the chip is
+	  operating with an external PHY.
diff --git a/drivers/net/ethernet/davicom/Makefile b/drivers/net/ethernet/davicom/Makefile
new file mode 100644
index 000000000000..74b31f0ebe18
--- /dev/null
+++ b/drivers/net/ethernet/davicom/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Davicom device drivers.
+#
+
+obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 8ef31dc4704d..438f4580bf66 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -56,6 +56,13 @@ static int watchdog = 5000;
 module_param(watchdog, int, 0400);
 MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
 
+/*
+ * Debug messages level
+ */
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "dm9000 debug level (0-4)");
+
 /* DM9000 register address locking.
  *
  * The DM9000 uses an address register to control where data written
@@ -103,7 +110,6 @@ typedef struct board_info {
 	unsigned int	flags;
 	unsigned int	in_suspend :1;
 	unsigned int	wake_supported :1;
-	int		debug_level;
 
 	enum dm9000_type type;
 
@@ -138,8 +144,7 @@ typedef struct board_info {
 /* debug code */
 
 #define dm9000_dbg(db, lev, msg...) do {		\
-	if ((lev) < CONFIG_DM9000_DEBUGLEVEL &&		\
-	    (lev) < db->debug_level) {			\
+	if ((lev) < debug) {				\
 		dev_dbg(db->dev, msg);			\
 	}						\
 } while (0)
@@ -1339,7 +1344,7 @@ static const struct net_device_ops dm9000_netdev_ops = {
 	.ndo_stop		= dm9000_stop,
 	.ndo_start_xmit		= dm9000_start_xmit,
 	.ndo_tx_timeout		= dm9000_timeout,
-	.ndo_set_multicast_list	= dm9000_hash_table,
+	.ndo_set_rx_mode	= dm9000_hash_table,
 	.ndo_do_ioctl		= dm9000_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_features	= dm9000_set_features,
diff --git a/drivers/net/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h
index 55688bd1a3ef..55688bd1a3ef 100644
--- a/drivers/net/dm9000.h
+++ b/drivers/net/ethernet/davicom/dm9000.h
diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig
new file mode 100644
index 000000000000..37940279ded8
--- /dev/null
+++ b/drivers/net/ethernet/dec/Kconfig
@@ -0,0 +1,37 @@
+#
+# Digital Equipment Inc network device configuration
+#
+
+config NET_VENDOR_DEC
+	bool "Digital Equipment devices"
+	default y
+	depends on PCI || EISA || CARDBUS
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about DEC cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_DEC
+
+config EWRK3
+	tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
+	depends on ISA
+	select CRC32
+	---help---
+	  This driver supports the DE203, DE204 and DE205 network (Ethernet)
+	  cards. If this is for you, say Y and read
+	  <file:Documentation/networking/ewrk3.txt> in the kernel source as
+	  well as the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ewrk3.
+
+source "drivers/net/ethernet/dec/tulip/Kconfig"
+
+endif # NET_VENDOR_DEC
diff --git a/drivers/net/ethernet/dec/Makefile b/drivers/net/ethernet/dec/Makefile
new file mode 100644
index 000000000000..1b01ed8d42c8
--- /dev/null
+++ b/drivers/net/ethernet/dec/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Digital Equipment Inc. network device drivers.
+#
+
+obj-$(CONFIG_EWRK3) += ewrk3.o
+obj-$(CONFIG_NET_TULIP) += tulip/
diff --git a/drivers/net/ewrk3.c b/drivers/net/ethernet/dec/ewrk3.c
index 05a5f71451a7..f9df5e4d0341 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ethernet/dec/ewrk3.c
@@ -393,7 +393,7 @@ static const struct net_device_ops ewrk3_netdev_ops = {
 	.ndo_open		= ewrk3_open,
 	.ndo_start_xmit		= ewrk3_queue_pkt,
 	.ndo_stop		= ewrk3_close,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_do_ioctl		= ewrk3_ioctl,
 	.ndo_tx_timeout		= ewrk3_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/ewrk3.h b/drivers/net/ethernet/dec/ewrk3.h
index 8e0ee906567b..8e0ee906567b 100644
--- a/drivers/net/ewrk3.h
+++ b/drivers/net/ethernet/dec/ewrk3.h
diff --git a/drivers/net/tulip/21142.c b/drivers/net/ethernet/dec/tulip/21142.c
index 092c3faa882a..092c3faa882a 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/ethernet/dec/tulip/21142.c
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
index 1f8d4a8d8ea4..f6af772b12c9 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -2,10 +2,10 @@
 # Tulip family network device configuration
 #
 
-menuconfig NET_TULIP
-	bool "\"Tulip\" family network device support"
-	depends on PCI || EISA || CARDBUS
-	help
+config NET_TULIP
+	bool "DEC - Tulip devices"
+	depends on (PCI || EISA || CARDBUS)
+	---help---
 	  This selects the "Tulip" family of EISA/PCI network cards.
 
 if NET_TULIP
@@ -32,7 +32,7 @@ config DE2104X_DSL
 	depends on DE2104X
 	range 0 31
 	default 0
-	help
+	---help---
 	  Setting this value allows to align ring buffer descriptors into their
 	  own cache lines. Value of 4 corresponds to the typical 32 byte line
 	  (the descriptor is 16 bytes). This is necessary on systems that lack
@@ -59,7 +59,7 @@ config TULIP
 config TULIP_MWI
 	bool "New bus configuration (EXPERIMENTAL)"
 	depends on TULIP && EXPERIMENTAL
-	help
+	---help---
 	  This configures your Tulip card specifically for the card and
 	  system cache line size type you are using.
 
@@ -70,7 +70,7 @@ config TULIP_MWI
 config TULIP_MMIO
 	bool "Use PCI shared mem for NIC registers"
 	depends on TULIP
-	help
+	---help---
 	  Use PCI shared memory for the NIC registers, rather than going through
 	  the Tulip's PIO (programmed I/O ports).  Faster, but could produce
 	  obscure bugs if your mainboard has memory controller timing issues.
@@ -79,7 +79,7 @@ config TULIP_MMIO
 config TULIP_NAPI
 	bool "Use RX polling (NAPI)"
 	depends on TULIP
-	help
+	---help---
 	  NAPI is a new driver API designed to reduce CPU and interrupt load
 	  when the driver is receiving lots of packets from the card. It is
 	  still somewhat experimental and thus not yet enabled by default.
@@ -107,7 +107,7 @@ config TULIP_DM910X
 
 config DE4X5
 	tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
-	depends on PCI || EISA
+	depends on (PCI || EISA)
 	select CRC32
 	---help---
 	  This is support for the DIGITAL series of PCI/EISA Ethernet cards.
@@ -126,7 +126,7 @@ config WINBOND_840
 	depends on PCI
 	select CRC32
 	select MII
-	help
+	---help---
 	  This driver is for the Winbond W89c840 chip.  It also works with 
 	  the TX9882 chip on the Compex RL100-ATX board.
 	  More specific information and updates are available from
diff --git a/drivers/net/tulip/Makefile b/drivers/net/ethernet/dec/tulip/Makefile
index 5e8be38b45bb..5e8be38b45bb 100644
--- a/drivers/net/tulip/Makefile
+++ b/drivers/net/ethernet/dec/tulip/Makefile
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
index ce90efc6ba3c..1427739d9a51 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -1956,7 +1956,7 @@ bad_srom:
 static const struct net_device_ops de_netdev_ops = {
 	.ndo_open		= de_open,
 	.ndo_stop		= de_close,
-	.ndo_set_multicast_list = de_set_rx_mode,
+	.ndo_set_rx_mode	= de_set_rx_mode,
 	.ndo_start_xmit		= de_start_xmit,
 	.ndo_get_stats		= de_get_stats,
 	.ndo_tx_timeout 	= de_tx_timeout,
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 959b41021a65..871bcaa7068d 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -1084,7 +1084,7 @@ static const struct net_device_ops de4x5_netdev_ops = {
     .ndo_stop		= de4x5_close,
     .ndo_start_xmit	= de4x5_queue_pkt,
     .ndo_get_stats	= de4x5_get_stats,
-    .ndo_set_multicast_list = set_multicast_list,
+    .ndo_set_rx_mode	= set_multicast_list,
     .ndo_do_ioctl	= de4x5_ioctl,
     .ndo_change_mtu	= eth_change_mtu,
     .ndo_set_mac_address= eth_mac_addr,
diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/ethernet/dec/tulip/de4x5.h
index 9f2877438fb0..9f2877438fb0 100644
--- a/drivers/net/tulip/de4x5.h
+++ b/drivers/net/ethernet/dec/tulip/de4x5.h
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index 9a21ca3873fc..17b11ee1745a 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -356,7 +356,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_open 		= dmfe_open,
 	.ndo_stop		= dmfe_stop,
 	.ndo_start_xmit		= dmfe_start_xmit,
-	.ndo_set_multicast_list = dmfe_set_filter_mode,
+	.ndo_set_rx_mode	= dmfe_set_filter_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/ethernet/dec/tulip/eeprom.c
index fa5eee925f25..fa5eee925f25 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/ethernet/dec/tulip/eeprom.c
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
index 5350d753e0ff..5350d753e0ff 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
diff --git a/drivers/net/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c
index 4bd13922875d..4bd13922875d 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/ethernet/dec/tulip/media.c
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/ethernet/dec/tulip/pnic.c
index 52d898bdbeb4..52d898bdbeb4 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/ethernet/dec/tulip/pnic.c
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/ethernet/dec/tulip/pnic2.c
index 93358ee4d830..93358ee4d830 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/ethernet/dec/tulip/pnic2.c
diff --git a/drivers/net/tulip/timer.c b/drivers/net/ethernet/dec/tulip/timer.c
index 2017faf2d0e6..2017faf2d0e6 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/ethernet/dec/tulip/timer.c
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h
index 9db528967da9..9db528967da9 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/ethernet/dec/tulip/tulip.h
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
index 1246998a677c..011f67c7ca47 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
@@ -1291,7 +1291,7 @@ static const struct net_device_ops tulip_netdev_ops = {
 	.ndo_stop		= tulip_close,
 	.ndo_get_stats		= tulip_get_stats,
 	.ndo_do_ioctl 		= private_ioctl,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
index 9e63f406f72d..7a44a7a6adc8 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -259,7 +259,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_open		= uli526x_open,
 	.ndo_stop		= uli526x_stop,
 	.ndo_start_xmit		= uli526x_start_xmit,
-	.ndo_set_multicast_list = uli526x_set_filter_mode,
+	.ndo_set_rx_mode	= uli526x_set_filter_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index 862eadf07191..4d01219ba22f 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -350,7 +350,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_stop		= netdev_close,
 	.ndo_start_xmit		= start_tx,
 	.ndo_get_stats		= get_stats,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_do_ioctl		= netdev_ioctl,
 	.ndo_tx_timeout		= tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/ethernet/dec/tulip/xircom_cb.c
index 988b8eb24d37..988b8eb24d37 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/ethernet/dec/tulip/xircom_cb.c
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
new file mode 100644
index 000000000000..84a28a668162
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -0,0 +1,85 @@
+#
+# D-Link device configuration
+#
+
+config NET_VENDOR_DLINK
+	bool "D-Link devices"
+	default y
+	depends on PCI || PARPORT
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about D-Link devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_DLINK
+
+config DE600
+	tristate "D-Link DE600 pocket adapter support"
+	depends on PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de600.
+
+config DE620
+	tristate "D-Link DE620 pocket adapter support"
+	depends on PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de620.
+
+config DL2K
+	tristate "DL2000/TC902x-based Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+	  which includes
+	  D-Link DGE-550T Gigabit Ethernet Adapter.
+	  D-Link DL2000-based Gigabit Ethernet Adapter.
+	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dl2k.
+
+config SUNDANCE
+	tristate "Sundance Alta support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver is for the Sundance "Alta" chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on SUNDANCE
+	---help---
+	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
+	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+	  is known to solve bugs on certain chips.
+
+	  If unsure, say N.
+
+endif # NET_VENDOR_DLINK
diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile
new file mode 100644
index 000000000000..c705eaa4f5b2
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the D-Link network device drivers.
+#
+
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
+obj-$(CONFIG_DL2K) += dl2k.o
+obj-$(CONFIG_SUNDANCE) += sundance.o
diff --git a/drivers/net/de600.c b/drivers/net/ethernet/dlink/de600.c
index 23a65398d011..23a65398d011 100644
--- a/drivers/net/de600.c
+++ b/drivers/net/ethernet/dlink/de600.c
diff --git a/drivers/net/de600.h b/drivers/net/ethernet/dlink/de600.h
index e80ecbabcf4e..e80ecbabcf4e 100644
--- a/drivers/net/de600.h
+++ b/drivers/net/ethernet/dlink/de600.h
diff --git a/drivers/net/de620.c b/drivers/net/ethernet/dlink/de620.c
index 1c51a7576119..3b934ab784d3 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/ethernet/dlink/de620.c
@@ -767,7 +767,7 @@ static const struct net_device_ops de620_netdev_ops = {
 	.ndo_stop 		= de620_close,
 	.ndo_start_xmit 	= de620_start_xmit,
 	.ndo_tx_timeout 	= de620_timeout,
-	.ndo_set_multicast_list = de620_set_multicast_list,
+	.ndo_set_rx_mode	= de620_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/de620.h b/drivers/net/ethernet/dlink/de620.h
index e8d9a88f4cb5..e8d9a88f4cb5 100644
--- a/drivers/net/de620.h
+++ b/drivers/net/ethernet/dlink/de620.h
diff --git a/drivers/net/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index ed73e4a93508..b2dc2c81a147 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -92,7 +92,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_get_stats		= get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_set_multicast_list = set_multicast,
+	.ndo_set_rx_mode	= set_multicast,
 	.ndo_do_ioctl		= rio_ioctl,
 	.ndo_tx_timeout		= rio_tx_timeout,
 	.ndo_change_mtu		= change_mtu,
@@ -1428,7 +1428,7 @@ mii_wait_link (struct net_device *dev, int wait)
 
 	do {
 		bmsr = mii_read (dev, phy_addr, MII_BMSR);
-		if (bmsr & MII_BMSR_LINK_STATUS)
+		if (bmsr & BMSR_LSTATUS)
 			return 0;
 		mdelay (1);
 	} while (--wait > 0);
@@ -1449,60 +1449,60 @@ mii_get_media (struct net_device *dev)
 
 	bmsr = mii_read (dev, phy_addr, MII_BMSR);
 	if (np->an_enable) {
-		if (!(bmsr & MII_BMSR_AN_COMPLETE)) {
+		if (!(bmsr & BMSR_ANEGCOMPLETE)) {
 			/* Auto-Negotiation not completed */
 			return -1;
 		}
-		negotiate = mii_read (dev, phy_addr, MII_ANAR) &
-			mii_read (dev, phy_addr, MII_ANLPAR);
-		mscr = mii_read (dev, phy_addr, MII_MSCR);
-		mssr = mii_read (dev, phy_addr, MII_MSSR);
-		if (mscr & MII_MSCR_1000BT_FD && mssr & MII_MSSR_LP_1000BT_FD) {
+		negotiate = mii_read (dev, phy_addr, MII_ADVERTISE) &
+			mii_read (dev, phy_addr, MII_LPA);
+		mscr = mii_read (dev, phy_addr, MII_CTRL1000);
+		mssr = mii_read (dev, phy_addr, MII_STAT1000);
+		if (mscr & ADVERTISE_1000FULL && mssr & LPA_1000FULL) {
 			np->speed = 1000;
 			np->full_duplex = 1;
 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
-		} else if (mscr & MII_MSCR_1000BT_HD && mssr & MII_MSSR_LP_1000BT_HD) {
+		} else if (mscr & ADVERTISE_1000HALF && mssr & LPA_1000HALF) {
 			np->speed = 1000;
 			np->full_duplex = 0;
 			printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");
-		} else if (negotiate & MII_ANAR_100BX_FD) {
+		} else if (negotiate & ADVERTISE_100FULL) {
 			np->speed = 100;
 			np->full_duplex = 1;
 			printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");
-		} else if (negotiate & MII_ANAR_100BX_HD) {
+		} else if (negotiate & ADVERTISE_100HALF) {
 			np->speed = 100;
 			np->full_duplex = 0;
 			printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");
-		} else if (negotiate & MII_ANAR_10BT_FD) {
+		} else if (negotiate & ADVERTISE_10FULL) {
 			np->speed = 10;
 			np->full_duplex = 1;
 			printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");
-		} else if (negotiate & MII_ANAR_10BT_HD) {
+		} else if (negotiate & ADVERTISE_10HALF) {
 			np->speed = 10;
 			np->full_duplex = 0;
 			printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");
 		}
-		if (negotiate & MII_ANAR_PAUSE) {
+		if (negotiate & ADVERTISE_PAUSE_CAP) {
 			np->tx_flow &= 1;
 			np->rx_flow &= 1;
-		} else if (negotiate & MII_ANAR_ASYMMETRIC) {
+		} else if (negotiate & ADVERTISE_PAUSE_ASYM) {
 			np->tx_flow = 0;
 			np->rx_flow &= 1;
 		}
 		/* else tx_flow, rx_flow = user select  */
 	} else {
 		__u16 bmcr = mii_read (dev, phy_addr, MII_BMCR);
-		switch (bmcr & (MII_BMCR_SPEED_100 | MII_BMCR_SPEED_1000)) {
-		case MII_BMCR_SPEED_1000:
+		switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) {
+		case BMCR_SPEED1000:
 			printk (KERN_INFO "Operating at 1000 Mbps, ");
 			break;
-		case MII_BMCR_SPEED_100:
+		case BMCR_SPEED100:
 			printk (KERN_INFO "Operating at 100 Mbps, ");
 			break;
 		case 0:
 			printk (KERN_INFO "Operating at 10 Mbps, ");
 		}
-		if (bmcr & MII_BMCR_DUPLEX_MODE) {
+		if (bmcr & BMCR_FULLDPLX) {
 			printk (KERN_CONT "Full duplex\n");
 		} else {
 			printk (KERN_CONT "Half duplex\n");
@@ -1536,24 +1536,22 @@ mii_set_media (struct net_device *dev)
 	if (np->an_enable) {
 		/* Advertise capabilities */
 		bmsr = mii_read (dev, phy_addr, MII_BMSR);
-		anar = mii_read (dev, phy_addr, MII_ANAR) &
-			     ~MII_ANAR_100BX_FD &
-			     ~MII_ANAR_100BX_HD &
-			     ~MII_ANAR_100BT4 &
-			     ~MII_ANAR_10BT_FD &
-			     ~MII_ANAR_10BT_HD;
-		if (bmsr & MII_BMSR_100BX_FD)
-			anar |= MII_ANAR_100BX_FD;
-		if (bmsr & MII_BMSR_100BX_HD)
-			anar |= MII_ANAR_100BX_HD;
-		if (bmsr & MII_BMSR_100BT4)
-			anar |= MII_ANAR_100BT4;
-		if (bmsr & MII_BMSR_10BT_FD)
-			anar |= MII_ANAR_10BT_FD;
-		if (bmsr & MII_BMSR_10BT_HD)
-			anar |= MII_ANAR_10BT_HD;
-		anar |= MII_ANAR_PAUSE | MII_ANAR_ASYMMETRIC;
-		mii_write (dev, phy_addr, MII_ANAR, anar);
+		anar = mii_read (dev, phy_addr, MII_ADVERTISE) &
+			~(ADVERTISE_100FULL | ADVERTISE_10FULL |
+			  ADVERTISE_100HALF | ADVERTISE_10HALF |
+			  ADVERTISE_100BASE4);
+		if (bmsr & BMSR_100FULL)
+			anar |= ADVERTISE_100FULL;
+		if (bmsr & BMSR_100HALF)
+			anar |= ADVERTISE_100HALF;
+		if (bmsr & BMSR_100BASE4)
+			anar |= ADVERTISE_100BASE4;
+		if (bmsr & BMSR_10FULL)
+			anar |= ADVERTISE_10FULL;
+		if (bmsr & BMSR_10HALF)
+			anar |= ADVERTISE_10HALF;
+		anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+		mii_write (dev, phy_addr, MII_ADVERTISE, anar);
 
 		/* Enable Auto crossover */
 		pscr = mii_read (dev, phy_addr, MII_PHY_SCR);
@@ -1561,8 +1559,8 @@ mii_set_media (struct net_device *dev)
 		mii_write (dev, phy_addr, MII_PHY_SCR, pscr);
 
 		/* Soft reset PHY */
-		mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET);
-		bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | MII_BMCR_RESET;
+		mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET);
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET;
 		mii_write (dev, phy_addr, MII_BMCR, bmcr);
 		mdelay(1);
 	} else {
@@ -1574,7 +1572,7 @@ mii_set_media (struct net_device *dev)
 
 		/* 2) PHY Reset */
 		bmcr = mii_read (dev, phy_addr, MII_BMCR);
-		bmcr |= MII_BMCR_RESET;
+		bmcr |= BMCR_RESET;
 		mii_write (dev, phy_addr, MII_BMCR, bmcr);
 
 		/* 3) Power Down */
@@ -1583,25 +1581,25 @@ mii_set_media (struct net_device *dev)
 		mdelay (100);	/* wait a certain time */
 
 		/* 4) Advertise nothing */
-		mii_write (dev, phy_addr, MII_ANAR, 0);
+		mii_write (dev, phy_addr, MII_ADVERTISE, 0);
 
 		/* 5) Set media and Power Up */
-		bmcr = MII_BMCR_POWER_DOWN;
+		bmcr = BMCR_PDOWN;
 		if (np->speed == 100) {
-			bmcr |= MII_BMCR_SPEED_100;
+			bmcr |= BMCR_SPEED100;
 			printk (KERN_INFO "Manual 100 Mbps, ");
 		} else if (np->speed == 10) {
 			printk (KERN_INFO "Manual 10 Mbps, ");
 		}
 		if (np->full_duplex) {
-			bmcr |= MII_BMCR_DUPLEX_MODE;
+			bmcr |= BMCR_FULLDPLX;
 			printk (KERN_CONT "Full duplex\n");
 		} else {
 			printk (KERN_CONT "Half duplex\n");
 		}
 #if 0
 		/* Set 1000BaseT Master/Slave setting */
-		mscr = mii_read (dev, phy_addr, MII_MSCR);
+		mscr = mii_read (dev, phy_addr, MII_CTRL1000);
 		mscr |= MII_MSCR_CFG_ENABLE;
 		mscr &= ~MII_MSCR_CFG_VALUE = 0;
 #endif
@@ -1624,7 +1622,7 @@ mii_get_media_pcs (struct net_device *dev)
 
 	bmsr = mii_read (dev, phy_addr, PCS_BMSR);
 	if (np->an_enable) {
-		if (!(bmsr & MII_BMSR_AN_COMPLETE)) {
+		if (!(bmsr & BMSR_ANEGCOMPLETE)) {
 			/* Auto-Negotiation not completed */
 			return -1;
 		}
@@ -1649,7 +1647,7 @@ mii_get_media_pcs (struct net_device *dev)
 	} else {
 		__u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
 		printk (KERN_INFO "Operating at 1000 Mbps, ");
-		if (bmcr & MII_BMCR_DUPLEX_MODE) {
+		if (bmcr & BMCR_FULLDPLX) {
 			printk (KERN_CONT "Full duplex\n");
 		} else {
 			printk (KERN_CONT "Half duplex\n");
@@ -1682,7 +1680,7 @@ mii_set_media_pcs (struct net_device *dev)
 	if (np->an_enable) {
 		/* Advertise capabilities */
 		esr = mii_read (dev, phy_addr, PCS_ESR);
-		anar = mii_read (dev, phy_addr, MII_ANAR) &
+		anar = mii_read (dev, phy_addr, MII_ADVERTISE) &
 			~PCS_ANAR_HALF_DUPLEX &
 			~PCS_ANAR_FULL_DUPLEX;
 		if (esr & (MII_ESR_1000BT_HD | MII_ESR_1000BX_HD))
@@ -1690,22 +1688,21 @@ mii_set_media_pcs (struct net_device *dev)
 		if (esr & (MII_ESR_1000BT_FD | MII_ESR_1000BX_FD))
 			anar |= PCS_ANAR_FULL_DUPLEX;
 		anar |= PCS_ANAR_PAUSE | PCS_ANAR_ASYMMETRIC;
-		mii_write (dev, phy_addr, MII_ANAR, anar);
+		mii_write (dev, phy_addr, MII_ADVERTISE, anar);
 
 		/* Soft reset PHY */
-		mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET);
-		bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN |
-		       MII_BMCR_RESET;
+		mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET);
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET;
 		mii_write (dev, phy_addr, MII_BMCR, bmcr);
 		mdelay(1);
 	} else {
 		/* Force speed setting */
 		/* PHY Reset */
-		bmcr = MII_BMCR_RESET;
+		bmcr = BMCR_RESET;
 		mii_write (dev, phy_addr, MII_BMCR, bmcr);
 		mdelay(10);
 		if (np->full_duplex) {
-			bmcr = MII_BMCR_DUPLEX_MODE;
+			bmcr = BMCR_FULLDPLX;
 			printk (KERN_INFO "Manual full duplex\n");
 		} else {
 			bmcr = 0;
@@ -1715,7 +1712,7 @@ mii_set_media_pcs (struct net_device *dev)
 		mdelay(10);
 
 		/*  Advertise nothing */
-		mii_write (dev, phy_addr, MII_ANAR, 0);
+		mii_write (dev, phy_addr, MII_ADVERTISE, 0);
 	}
 	return 0;
 }
diff --git a/drivers/net/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
index 7caab3d26a9e..ba0adcafa55a 100644
--- a/drivers/net/dl2k.h
+++ b/drivers/net/ethernet/dlink/dl2k.h
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/ethtool.h>
+#include <linux/mii.h>
 #include <linux/bitops.h>
 #include <asm/processor.h>	/* Processor type for cache alignment. */
 #include <asm/io.h>
@@ -271,20 +272,9 @@ enum RFS_bits {
 #define MII_RESET_TIME_OUT		10000
 /* MII register */
 enum _mii_reg {
-	MII_BMCR = 0,
-	MII_BMSR = 1,
-	MII_PHY_ID1 = 2,
-	MII_PHY_ID2 = 3,
-	MII_ANAR = 4,
-	MII_ANLPAR = 5,
-	MII_ANER = 6,
-	MII_ANNPT = 7,
-	MII_ANLPRNP = 8,
-	MII_MSCR = 9,
-	MII_MSSR = 10,
-	MII_ESR = 15,
 	MII_PHY_SCR = 16,
 };
+
 /* PCS register */
 enum _pcs_reg {
 	PCS_BMCR = 0,
@@ -297,102 +287,6 @@ enum _pcs_reg {
 	PCS_ESR = 15,
 };
 
-/* Basic Mode Control Register */
-enum _mii_bmcr {
-	MII_BMCR_RESET = 0x8000,
-	MII_BMCR_LOOP_BACK = 0x4000,
-	MII_BMCR_SPEED_LSB = 0x2000,
-	MII_BMCR_AN_ENABLE = 0x1000,
-	MII_BMCR_POWER_DOWN = 0x0800,
-	MII_BMCR_ISOLATE = 0x0400,
-	MII_BMCR_RESTART_AN = 0x0200,
-	MII_BMCR_DUPLEX_MODE = 0x0100,
-	MII_BMCR_COL_TEST = 0x0080,
-	MII_BMCR_SPEED_MSB = 0x0040,
-	MII_BMCR_SPEED_RESERVED = 0x003f,
-	MII_BMCR_SPEED_10 = 0,
-	MII_BMCR_SPEED_100 = MII_BMCR_SPEED_LSB,
-	MII_BMCR_SPEED_1000 = MII_BMCR_SPEED_MSB,
-};
-
-/* Basic Mode Status Register */
-enum _mii_bmsr {
-	MII_BMSR_100BT4 = 0x8000,
-	MII_BMSR_100BX_FD = 0x4000,
-	MII_BMSR_100BX_HD = 0x2000,
-	MII_BMSR_10BT_FD = 0x1000,
-	MII_BMSR_10BT_HD = 0x0800,
-	MII_BMSR_100BT2_FD = 0x0400,
-	MII_BMSR_100BT2_HD = 0x0200,
-	MII_BMSR_EXT_STATUS = 0x0100,
-	MII_BMSR_PREAMBLE_SUPP = 0x0040,
-	MII_BMSR_AN_COMPLETE = 0x0020,
-	MII_BMSR_REMOTE_FAULT = 0x0010,
-	MII_BMSR_AN_ABILITY = 0x0008,
-	MII_BMSR_LINK_STATUS = 0x0004,
-	MII_BMSR_JABBER_DETECT = 0x0002,
-	MII_BMSR_EXT_CAP = 0x0001,
-};
-
-/* ANAR */
-enum _mii_anar {
-	MII_ANAR_NEXT_PAGE = 0x8000,
-	MII_ANAR_REMOTE_FAULT = 0x4000,
-	MII_ANAR_ASYMMETRIC = 0x0800,
-	MII_ANAR_PAUSE = 0x0400,
-	MII_ANAR_100BT4 = 0x0200,
-	MII_ANAR_100BX_FD = 0x0100,
-	MII_ANAR_100BX_HD = 0x0080,
-	MII_ANAR_10BT_FD = 0x0020,
-	MII_ANAR_10BT_HD = 0x0010,
-	MII_ANAR_SELECTOR = 0x001f,
-	MII_IEEE8023_CSMACD = 0x0001,
-};
-
-/* ANLPAR */
-enum _mii_anlpar {
-	MII_ANLPAR_NEXT_PAGE = MII_ANAR_NEXT_PAGE,
-	MII_ANLPAR_REMOTE_FAULT = MII_ANAR_REMOTE_FAULT,
-	MII_ANLPAR_ASYMMETRIC = MII_ANAR_ASYMMETRIC,
-	MII_ANLPAR_PAUSE = MII_ANAR_PAUSE,
-	MII_ANLPAR_100BT4 = MII_ANAR_100BT4,
-	MII_ANLPAR_100BX_FD = MII_ANAR_100BX_FD,
-	MII_ANLPAR_100BX_HD = MII_ANAR_100BX_HD,
-	MII_ANLPAR_10BT_FD = MII_ANAR_10BT_FD,
-	MII_ANLPAR_10BT_HD = MII_ANAR_10BT_HD,
-	MII_ANLPAR_SELECTOR = MII_ANAR_SELECTOR,
-};
-
-/* Auto-Negotiation Expansion Register */
-enum _mii_aner {
-	MII_ANER_PAR_DETECT_FAULT = 0x0010,
-	MII_ANER_LP_NEXTPAGABLE = 0x0008,
-	MII_ANER_NETXTPAGABLE = 0x0004,
-	MII_ANER_PAGE_RECEIVED = 0x0002,
-	MII_ANER_LP_NEGOTIABLE = 0x0001,
-};
-
-/* MASTER-SLAVE Control Register */
-enum _mii_mscr {
-	MII_MSCR_TEST_MODE = 0xe000,
-	MII_MSCR_CFG_ENABLE = 0x1000,
-	MII_MSCR_CFG_VALUE = 0x0800,
-	MII_MSCR_PORT_VALUE = 0x0400,
-	MII_MSCR_1000BT_FD = 0x0200,
-	MII_MSCR_1000BT_HD = 0X0100,
-};
-
-/* MASTER-SLAVE Status Register */
-enum _mii_mssr {
-	MII_MSSR_CFG_FAULT = 0x8000,
-	MII_MSSR_CFG_RES = 0x4000,
-	MII_MSSR_LOCAL_RCV_STATUS = 0x2000,
-	MII_MSSR_REMOTE_RCVR = 0x1000,
-	MII_MSSR_LP_1000BT_FD = 0x0800,
-	MII_MSSR_LP_1000BT_HD = 0x0400,
-	MII_MSSR_IDLE_ERR_COUNT = 0x00ff,
-};
-
 /* IEEE Extened Status Register */
 enum _mii_esr {
 	MII_ESR_1000BX_FD = 0x8000,
diff --git a/drivers/net/sundance.c b/drivers/net/ethernet/dlink/sundance.c
index 4793df843c24..dcd7f7a71ad4 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/ethernet/dlink/sundance.c
@@ -464,7 +464,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_stop		= netdev_close,
 	.ndo_start_xmit		= start_tx,
 	.ndo_get_stats 		= get_stats,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_do_ioctl 		= netdev_ioctl,
 	.ndo_tx_timeout		= tx_timeout,
 	.ndo_change_mtu		= change_mtu,
diff --git a/drivers/net/dnet.c b/drivers/net/ethernet/dnet.c
index c1063d1540c2..c1063d1540c2 100644
--- a/drivers/net/dnet.c
+++ b/drivers/net/ethernet/dnet.c
diff --git a/drivers/net/dnet.h b/drivers/net/ethernet/dnet.h
index 37f5b30fa78b..37f5b30fa78b 100644
--- a/drivers/net/dnet.h
+++ b/drivers/net/ethernet/dnet.h
diff --git a/drivers/net/ethernet/emulex/Kconfig b/drivers/net/ethernet/emulex/Kconfig
new file mode 100644
index 000000000000..7a28a6433944
--- /dev/null
+++ b/drivers/net/ethernet/emulex/Kconfig
@@ -0,0 +1,23 @@
+#
+# Emulex driver configuration
+#
+
+config NET_VENDOR_EMULEX
+	bool "Emulex devices"
+	default y
+	depends on PCI && INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Emulex cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_EMULEX
+
+source "drivers/net/ethernet/emulex/benet/Kconfig"
+
+endif # NET_VENDOR_EMULEX
diff --git a/drivers/net/ethernet/emulex/Makefile b/drivers/net/ethernet/emulex/Makefile
new file mode 100644
index 000000000000..ea8ec574d45a
--- /dev/null
+++ b/drivers/net/ethernet/emulex/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Emulex device drivers.
+#
+
+obj-$(CONFIG_BE2NET) += benet/
diff --git a/drivers/net/ethernet/emulex/benet/Kconfig b/drivers/net/ethernet/emulex/benet/Kconfig
new file mode 100644
index 000000000000..804db04a2bd0
--- /dev/null
+++ b/drivers/net/ethernet/emulex/benet/Kconfig
@@ -0,0 +1,6 @@
+config BE2NET
+	tristate "ServerEngines' 10Gbps NIC - BladeEngine"
+	depends on PCI && INET
+	---help---
+	  This driver implements the NIC functionality for ServerEngines'
+	  10Gbps network adapter - BladeEngine.
diff --git a/drivers/net/benet/Makefile b/drivers/net/ethernet/emulex/benet/Makefile
index a60cd8051135..a60cd8051135 100644
--- a/drivers/net/benet/Makefile
+++ b/drivers/net/ethernet/emulex/benet/Makefile
diff --git a/drivers/net/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index c85768cd1b18..c5f05163bf22 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -29,6 +29,7 @@
 #include <linux/interrupt.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
+#include <linux/u64_stats_sync.h>
 
 #include "be_hw.h"
 
@@ -167,15 +168,15 @@ struct be_mcc_obj {
 };
 
 struct be_tx_stats {
-	u32 be_tx_reqs;		/* number of TX requests initiated */
-	u32 be_tx_stops;	/* number of times TX Q was stopped */
-	u32 be_tx_wrbs;		/* number of tx WRBs used */
-	u32 be_tx_compl;	/* number of tx completion entries processed */
-	ulong be_tx_jiffies;
-	u64 be_tx_bytes;
-	u64 be_tx_bytes_prev;
-	u64 be_tx_pkts;
-	u32 be_tx_rate;
+	u64 tx_bytes;
+	u64 tx_pkts;
+	u64 tx_reqs;
+	u64 tx_wrbs;
+	u64 tx_compl;
+	ulong tx_jiffies;
+	u32 tx_stops;
+	struct u64_stats_sync sync;
+	struct u64_stats_sync sync_compl;
 };
 
 struct be_tx_obj {
@@ -195,22 +196,20 @@ struct be_rx_page_info {
 };
 
 struct be_rx_stats {
-	u32 rx_post_fail;/* number of ethrx buffer alloc failures */
-	u32 rx_polls;	/* number of times NAPI called poll function */
-	u32 rx_events;	/* number of ucast rx completion events  */
-	u32 rx_compl;	/* number of rx completion entries processed */
-	ulong rx_dropped; /* number of skb allocation errors */
-	ulong rx_jiffies;
 	u64 rx_bytes;
-	u64 rx_bytes_prev;
 	u64 rx_pkts;
-	u32 rx_rate;
+	u64 rx_pkts_prev;
+	ulong rx_jiffies;
+	u32 rx_drops_no_skbs;	/* skb allocation errors */
+	u32 rx_drops_no_frags;	/* HW has no fetched frags */
+	u32 rx_post_fail;	/* page post alloc failures */
+	u32 rx_polls;		/* NAPI calls */
+	u32 rx_events;
+	u32 rx_compl;
 	u32 rx_mcast_pkts;
-	u32 rxcp_err;	/* Num rx completion entries w/ err set. */
-	ulong rx_fps_jiffies;	/* jiffies at last FPS calc */
-	u32 rx_frags;
-	u32 prev_rx_frags;
-	u32 rx_fps;		/* Rx frags per second */
+	u32 rx_compl_err;	/* completions with err set */
+	u32 rx_pps;		/* pkts per second */
+	struct u64_stats_sync sync;
 };
 
 struct be_rx_compl_info {
@@ -218,7 +217,7 @@ struct be_rx_compl_info {
 	u16 vlan_tag;
 	u16 pkt_size;
 	u16 rxq_idx;
-	u16 mac_id;
+	u16 port;
 	u8 vlanf;
 	u8 num_rcvd;
 	u8 err;
@@ -247,43 +246,40 @@ struct be_rx_obj {
 
 struct be_drv_stats {
 	u8 be_on_die_temperature;
-	u64 be_tx_events;
-	u64 eth_red_drops;
-	u64 rx_drops_no_pbuf;
-	u64 rx_drops_no_txpb;
-	u64 rx_drops_no_erx_descr;
-	u64 rx_drops_no_tpre_descr;
-	u64 rx_drops_too_many_frags;
-	u64 rx_drops_invalid_ring;
-	u64 forwarded_packets;
-	u64 rx_drops_mtu;
-	u64 rx_crc_errors;
-	u64 rx_alignment_symbol_errors;
-	u64 rx_pause_frames;
-	u64 rx_priority_pause_frames;
-	u64 rx_control_frames;
-	u64 rx_in_range_errors;
-	u64 rx_out_range_errors;
-	u64 rx_frame_too_long;
-	u64 rx_address_match_errors;
-	u64 rx_dropped_too_small;
-	u64 rx_dropped_too_short;
-	u64 rx_dropped_header_too_small;
-	u64 rx_dropped_tcp_length;
-	u64 rx_dropped_runt;
-	u64 rx_ip_checksum_errs;
-	u64 rx_tcp_checksum_errs;
-	u64 rx_udp_checksum_errs;
-	u64 rx_switched_unicast_packets;
-	u64 rx_switched_multicast_packets;
-	u64 rx_switched_broadcast_packets;
-	u64 tx_pauseframes;
-	u64 tx_priority_pauseframes;
-	u64 tx_controlframes;
-	u64 rxpp_fifo_overflow_drop;
-	u64 rx_input_fifo_overflow_drop;
-	u64 pmem_fifo_overflow_drop;
-	u64 jabber_events;
+	u32 tx_events;
+	u32 eth_red_drops;
+	u32 rx_drops_no_pbuf;
+	u32 rx_drops_no_txpb;
+	u32 rx_drops_no_erx_descr;
+	u32 rx_drops_no_tpre_descr;
+	u32 rx_drops_too_many_frags;
+	u32 rx_drops_invalid_ring;
+	u32 forwarded_packets;
+	u32 rx_drops_mtu;
+	u32 rx_crc_errors;
+	u32 rx_alignment_symbol_errors;
+	u32 rx_pause_frames;
+	u32 rx_priority_pause_frames;
+	u32 rx_control_frames;
+	u32 rx_in_range_errors;
+	u32 rx_out_range_errors;
+	u32 rx_frame_too_long;
+	u32 rx_address_match_errors;
+	u32 rx_dropped_too_small;
+	u32 rx_dropped_too_short;
+	u32 rx_dropped_header_too_small;
+	u32 rx_dropped_tcp_length;
+	u32 rx_dropped_runt;
+	u32 rx_ip_checksum_errs;
+	u32 rx_tcp_checksum_errs;
+	u32 rx_udp_checksum_errs;
+	u32 tx_pauseframes;
+	u32 tx_priority_pauseframes;
+	u32 tx_controlframes;
+	u32 rxpp_fifo_overflow_drop;
+	u32 rx_input_fifo_overflow_drop;
+	u32 pmem_fifo_overflow_drop;
+	u32 jabber_events;
 };
 
 struct be_vf_cfg {
@@ -302,7 +298,6 @@ struct be_adapter {
 
 	u8 __iomem *csr;
 	u8 __iomem *db;		/* Door Bell */
-	u8 __iomem *pcicfg;	/* PCI config space */
 
 	struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
 	struct be_dma_mem mbox_mem;
@@ -338,7 +333,7 @@ struct be_adapter {
 	u8 vlan_tag[VLAN_N_VID];
 	u8 vlan_prio_bmap;	/* Available Priority BitMap */
 	u16 recommended_prio;	/* Recommended Priority */
-	struct be_dma_mem mc_cmd_mem;
+	struct be_dma_mem rx_filter; /* Cmd DMA mem for rx-filter */
 
 	struct be_dma_mem stats_cmd;
 	/* Work queue used to perform periodic tasks like getting statistics */
@@ -352,7 +347,6 @@ struct be_adapter {
 	u32 beacon_state;	/* for set_phys_id */
 
 	bool eeh_err;
-	bool link_up;
 	u32 port_num;
 	bool promiscuous;
 	bool wol;
@@ -385,6 +379,8 @@ struct be_adapter {
 #define BE_GEN2 2
 #define BE_GEN3 3
 
+#define ON				1
+#define OFF				0
 #define lancer_chip(adapter)	((adapter->pdev->device == OC_DEVICE_ID3) || \
 				 (adapter->pdev->device == OC_DEVICE_ID4))
 
@@ -525,8 +521,7 @@ static inline bool be_multi_rxq(const struct be_adapter *adapter)
 
 extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,
 		u16 num_popped);
-extern void be_link_status_update(struct be_adapter *adapter, bool link_up);
-extern void netdev_stats_update(struct be_adapter *adapter);
+extern void be_link_status_update(struct be_adapter *adapter, u32 link_status);
 extern void be_parse_stats(struct be_adapter *adapter);
 extern int be_load_fw(struct be_adapter *adapter, u8 *func);
 #endif				/* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 054fa67bc4e3..bebeee68b2fa 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -82,28 +82,7 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
 		if (((compl->tag0 == OPCODE_ETH_GET_STATISTICS) ||
 			 (compl->tag0 == OPCODE_ETH_GET_PPORT_STATS)) &&
 			(compl->tag1 == CMD_SUBSYSTEM_ETH)) {
-			if (adapter->generation == BE_GEN3) {
-				if (lancer_chip(adapter)) {
-					struct lancer_cmd_resp_pport_stats
-						*resp = adapter->stats_cmd.va;
-					be_dws_le_to_cpu(&resp->pport_stats,
-						sizeof(resp->pport_stats));
-				} else {
-					struct be_cmd_resp_get_stats_v1 *resp =
-							adapter->stats_cmd.va;
-
-				be_dws_le_to_cpu(&resp->hw_stats,
-							sizeof(resp->hw_stats));
-				}
-			} else {
-				struct be_cmd_resp_get_stats_v0 *resp =
-							adapter->stats_cmd.va;
-
-				be_dws_le_to_cpu(&resp->hw_stats,
-							sizeof(resp->hw_stats));
-			}
 			be_parse_stats(adapter);
-			netdev_stats_update(adapter);
 			adapter->stats_cmd_sent = false;
 		}
 	} else {
@@ -131,8 +110,7 @@ done:
 static void be_async_link_state_process(struct be_adapter *adapter,
 		struct be_async_event_link_state *evt)
 {
-	be_link_status_update(adapter,
-		evt->port_link_status == ASYNC_EVENT_LINK_UP);
+	be_link_status_update(adapter, evt->port_link_status);
 }
 
 /* Grp5 CoS Priority evt */
@@ -162,7 +140,7 @@ static void be_async_grp5_pvid_state_process(struct be_adapter *adapter,
 		struct be_async_event_grp5_pvid_state *evt)
 {
 	if (evt->enabled)
-		adapter->pvid = le16_to_cpu(evt->tag);
+		adapter->pvid = le16_to_cpu(evt->tag) & VLAN_VID_MASK;
 	else
 		adapter->pvid = 0;
 }
@@ -1282,8 +1260,8 @@ err:
 }
 
 /* Uses synchronous mcc */
-int be_cmd_link_status_query(struct be_adapter *adapter,
-			bool *link_up, u8 *mac_speed, u16 *link_speed, u32 dom)
+int be_cmd_link_status_query(struct be_adapter *adapter, u8 *mac_speed,
+			u16 *link_speed, u32 dom)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_link_status *req;
@@ -1298,8 +1276,6 @@ int be_cmd_link_status_query(struct be_adapter *adapter,
 	}
 	req = embedded_payload(wrb);
 
-	*link_up = false;
-
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
 			OPCODE_COMMON_NTWK_LINK_STATUS_QUERY);
 
@@ -1310,7 +1286,6 @@ int be_cmd_link_status_query(struct be_adapter *adapter,
 	if (!status) {
 		struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
 		if (resp->mac_speed != PHY_LINK_SPEED_ZERO) {
-			*link_up = true;
 			*link_speed = le16_to_cpu(resp->link_speed);
 			*mac_speed = resp->mac_speed;
 		}
@@ -1573,70 +1548,11 @@ err:
 	return status;
 }
 
-/* Uses MCC for this command as it may be called in BH context
- * Uses synchronous mcc
- */
-int be_cmd_promiscuous_config(struct be_adapter *adapter, bool en)
-{
-	struct be_mcc_wrb *wrb;
-	struct be_cmd_req_rx_filter *req;
-	struct be_dma_mem promiscous_cmd;
-	struct be_sge *sge;
-	int status;
-
-	memset(&promiscous_cmd, 0, sizeof(struct be_dma_mem));
-	promiscous_cmd.size = sizeof(struct be_cmd_req_rx_filter);
-	promiscous_cmd.va = pci_alloc_consistent(adapter->pdev,
-				promiscous_cmd.size, &promiscous_cmd.dma);
-	if (!promiscous_cmd.va) {
-		dev_err(&adapter->pdev->dev,
-				"Memory allocation failure\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_bh(&adapter->mcc_lock);
-
-	wrb = wrb_from_mccq(adapter);
-	if (!wrb) {
-		status = -EBUSY;
-		goto err;
-	}
-
-	req = promiscous_cmd.va;
-	sge = nonembedded_sgl(wrb);
-
-	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
-					OPCODE_COMMON_NTWK_RX_FILTER);
-	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
-			OPCODE_COMMON_NTWK_RX_FILTER, sizeof(*req));
-
-	req->if_id = cpu_to_le32(adapter->if_handle);
-	req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS);
-	if (en)
-		req->if_flags = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS);
-
-	sge->pa_hi = cpu_to_le32(upper_32_bits(promiscous_cmd.dma));
-	sge->pa_lo = cpu_to_le32(promiscous_cmd.dma & 0xFFFFFFFF);
-	sge->len = cpu_to_le32(promiscous_cmd.size);
-
-	status = be_mcc_notify_wait(adapter);
-
-err:
-	spin_unlock_bh(&adapter->mcc_lock);
-	pci_free_consistent(adapter->pdev, promiscous_cmd.size,
-			promiscous_cmd.va, promiscous_cmd.dma);
-	return status;
-}
-
-/*
- * Uses MCC for this command as it may be called in BH context
- * (mc == NULL) => multicast promiscuous
- */
-int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
-		struct net_device *netdev, struct be_dma_mem *mem)
+int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
 {
 	struct be_mcc_wrb *wrb;
-	struct be_cmd_req_mcast_mac_config *req = mem->va;
+	struct be_dma_mem *mem = &adapter->rx_filter;
+	struct be_cmd_req_rx_filter *req = mem->va;
 	struct be_sge *sge;
 	int status;
 
@@ -1648,33 +1564,36 @@ int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
 		goto err;
 	}
 	sge = nonembedded_sgl(wrb);
-	memset(req, 0, sizeof(*req));
-
-	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
-			OPCODE_COMMON_NTWK_MULTICAST_SET);
 	sge->pa_hi = cpu_to_le32(upper_32_bits(mem->dma));
 	sge->pa_lo = cpu_to_le32(mem->dma & 0xFFFFFFFF);
 	sge->len = cpu_to_le32(mem->size);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
+				OPCODE_COMMON_NTWK_RX_FILTER);
 
+	memset(req, 0, sizeof(*req));
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
-		OPCODE_COMMON_NTWK_MULTICAST_SET, sizeof(*req));
+				OPCODE_COMMON_NTWK_RX_FILTER, sizeof(*req));
 
-	req->interface_id = if_id;
-	if (netdev) {
-		int i;
+	req->if_id = cpu_to_le32(adapter->if_handle);
+	if (flags & IFF_PROMISC) {
+		req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS |
+					BE_IF_FLAGS_VLAN_PROMISCUOUS);
+		if (value == ON)
+			req->if_flags = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS |
+					BE_IF_FLAGS_VLAN_PROMISCUOUS);
+	} else if (flags & IFF_ALLMULTI) {
+		req->if_flags_mask = req->if_flags =
+			cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS);
+	} else {
 		struct netdev_hw_addr *ha;
+		int i = 0;
 
-		req->num_mac = cpu_to_le16(netdev_mc_count(netdev));
-
-		i = 0;
-		netdev_for_each_mc_addr(ha, netdev)
-			memcpy(req->mac[i++].byte, ha->addr, ETH_ALEN);
-	} else {
-		req->promiscuous = 1;
+		req->mcast_num = cpu_to_le16(netdev_mc_count(adapter->netdev));
+		netdev_for_each_mc_addr(ha, adapter->netdev)
+			memcpy(req->mcast_mac[i++].byte, ha->addr, ETH_ALEN);
 	}
 
 	status = be_mcc_notify_wait(adapter);
-
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
@@ -2020,7 +1939,7 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	spin_unlock_bh(&adapter->mcc_lock);
 
 	if (!wait_for_completion_timeout(&adapter->flash_compl,
-			msecs_to_jiffies(12000)))
+			msecs_to_jiffies(40000)))
 		status = -1;
 	else
 		status = adapter->flash_status;
@@ -2268,11 +2187,13 @@ err:
 	return status;
 }
 
-int be_cmd_get_phy_info(struct be_adapter *adapter, struct be_dma_mem *cmd)
+int be_cmd_get_phy_info(struct be_adapter *adapter,
+				struct be_phy_info *phy_info)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_get_phy_info *req;
 	struct be_sge *sge;
+	struct be_dma_mem cmd;
 	int status;
 
 	spin_lock_bh(&adapter->mcc_lock);
@@ -2282,8 +2203,16 @@ int be_cmd_get_phy_info(struct be_adapter *adapter, struct be_dma_mem *cmd)
 		status = -EBUSY;
 		goto err;
 	}
+	cmd.size = sizeof(struct be_cmd_req_get_phy_info);
+	cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size,
+					&cmd.dma);
+	if (!cmd.va) {
+		dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
+		status = -ENOMEM;
+		goto err;
+	}
 
-	req = cmd->va;
+	req = cmd.va;
 	sge = nonembedded_sgl(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
@@ -2293,11 +2222,20 @@ int be_cmd_get_phy_info(struct be_adapter *adapter, struct be_dma_mem *cmd)
 			OPCODE_COMMON_GET_PHY_DETAILS,
 			sizeof(*req));
 
-	sge->pa_hi = cpu_to_le32(upper_32_bits(cmd->dma));
-	sge->pa_lo = cpu_to_le32(cmd->dma & 0xFFFFFFFF);
-	sge->len = cpu_to_le32(cmd->size);
+	sge->pa_hi = cpu_to_le32(upper_32_bits(cmd.dma));
+	sge->pa_lo = cpu_to_le32(cmd.dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(cmd.size);
 
 	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_phy_info *resp_phy_info =
+				cmd.va + sizeof(struct be_cmd_req_hdr);
+		phy_info->phy_type = le16_to_cpu(resp_phy_info->phy_type);
+		phy_info->interface_type =
+			le16_to_cpu(resp_phy_info->interface_type);
+	}
+	pci_free_consistent(adapter->pdev, cmd.size,
+				cmd.va, cmd.dma);
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 8e4d48824fe9..b61eac7ece35 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -89,9 +89,10 @@ struct be_async_event_trailer {
 };
 
 enum {
-	ASYNC_EVENT_LINK_DOWN 	= 0x0,
-	ASYNC_EVENT_LINK_UP 	= 0x1
+	LINK_DOWN	= 0x0,
+	LINK_UP		= 0x1
 };
+#define LINK_STATUS_MASK			0x1
 
 /* When the event code of an async trailer is link-state, the mcc_compl
  * must be interpreted as follows
@@ -693,8 +694,7 @@ struct be_cmd_resp_get_stats_v0 {
 	struct be_hw_stats_v0 hw_stats;
 };
 
-#define make_64bit_val(hi_32, lo_32)	(((u64)hi_32<<32) | lo_32)
-struct lancer_cmd_pport_stats {
+struct lancer_pport_stats {
 	u32 tx_packets_lo;
 	u32 tx_packets_hi;
 	u32 tx_unicast_packets_lo;
@@ -871,16 +871,16 @@ struct lancer_cmd_req_pport_stats {
 	struct be_cmd_req_hdr hdr;
 	union {
 		struct pport_stats_params params;
-		u8 rsvd[sizeof(struct lancer_cmd_pport_stats)];
+		u8 rsvd[sizeof(struct lancer_pport_stats)];
 	} cmd_params;
 };
 
 struct lancer_cmd_resp_pport_stats {
 	struct be_cmd_resp_hdr hdr;
-	struct lancer_cmd_pport_stats pport_stats;
+	struct lancer_pport_stats pport_stats;
 };
 
-static inline  struct lancer_cmd_pport_stats*
+static inline struct lancer_pport_stats*
 	pport_stats_from_cmd(struct be_adapter *adapter)
 {
 	struct lancer_cmd_resp_pport_stats *cmd = adapter->stats_cmd.va;
@@ -910,21 +910,12 @@ struct be_cmd_req_vlan_config {
 	u16 normal_vlan[64];
 } __packed;
 
-/******************** Multicast MAC Config *******************/
+/******************* RX FILTER ******************************/
 #define BE_MAX_MC		64 /* set mcast promisc if > 64 */
 struct macaddr {
 	u8 byte[ETH_ALEN];
 };
 
-struct be_cmd_req_mcast_mac_config {
-	struct be_cmd_req_hdr hdr;
-	u16 num_mac;
-	u8 promiscuous;
-	u8 interface_id;
-	struct macaddr mac[BE_MAX_MC];
-} __packed;
-
-/******************* RX FILTER ******************************/
 struct be_cmd_req_rx_filter {
 	struct be_cmd_req_hdr hdr;
 	u32 global_flags_mask;
@@ -932,11 +923,10 @@ struct be_cmd_req_rx_filter {
 	u32 if_flags_mask;
 	u32 if_flags;
 	u32 if_id;
-	u32 multicast_num;
-	struct macaddr mac[BE_MAX_MC];
+	u32 mcast_num;
+	struct macaddr mcast_mac[BE_MAX_MC];
 };
 
-
 /******************** Link Status Query *******************/
 struct be_cmd_req_link_status {
 	struct be_cmd_req_hdr hdr;
@@ -1254,14 +1244,19 @@ struct be_cmd_req_get_phy_info {
 	struct be_cmd_req_hdr hdr;
 	u8 rsvd0[24];
 };
-struct be_cmd_resp_get_phy_info {
-	struct be_cmd_req_hdr hdr;
+
+struct be_phy_info {
 	u16 phy_type;
 	u16 interface_type;
 	u32 misc_params;
 	u32 future_use[4];
 };
 
+struct be_cmd_resp_get_phy_info {
+	struct be_cmd_req_hdr hdr;
+	struct be_phy_info phy_info;
+};
+
 /*********************** Set QOS ***********************/
 
 #define BE_QOS_BITS_NIC				1
@@ -1383,8 +1378,7 @@ struct be_cmd_resp_get_stats_v1 {
 	struct be_hw_stats_v1 hw_stats;
 };
 
-static inline void *
-hw_stats_from_cmd(struct be_adapter *adapter)
+static inline void *hw_stats_from_cmd(struct be_adapter *adapter)
 {
 	if (adapter->generation == BE_GEN3) {
 		struct be_cmd_resp_get_stats_v1 *cmd = adapter->stats_cmd.va;
@@ -1397,34 +1391,6 @@ hw_stats_from_cmd(struct be_adapter *adapter)
 	}
 }
 
-static inline void *be_port_rxf_stats_from_cmd(struct be_adapter *adapter)
-{
-	if (adapter->generation == BE_GEN3) {
-		struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
-		struct be_rxf_stats_v1 *rxf_stats = &hw_stats->rxf;
-
-		return &rxf_stats->port[adapter->port_num];
-	} else {
-		struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
-		struct be_rxf_stats_v0 *rxf_stats = &hw_stats->rxf;
-
-		return &rxf_stats->port[adapter->port_num];
-	}
-}
-
-static inline void *be_rxf_stats_from_cmd(struct be_adapter *adapter)
-{
-	if (adapter->generation == BE_GEN3) {
-		struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
-
-		return &hw_stats->rxf;
-	} else {
-		struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
-
-		return &hw_stats->rxf;
-	}
-}
-
 static inline void *be_erx_stats_from_cmd(struct be_adapter *adapter)
 {
 	if (adapter->generation == BE_GEN3) {
@@ -1438,19 +1404,6 @@ static inline void *be_erx_stats_from_cmd(struct be_adapter *adapter)
 	}
 }
 
-static inline void *be_pmem_stats_from_cmd(struct be_adapter *adapter)
-{
-	if (adapter->generation == BE_GEN3) {
-		struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
-
-		return &hw_stats->pmem;
-	} else {
-		struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
-
-		return &hw_stats->pmem;
-	}
-}
-
 extern int be_pci_fnum_get(struct be_adapter *adapter);
 extern int be_cmd_POST(struct be_adapter *adapter);
 extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -1485,7 +1438,7 @@ extern int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 extern int be_cmd_rxq_destroy(struct be_adapter *adapter,
 			struct be_queue_info *q);
 extern int be_cmd_link_status_query(struct be_adapter *adapter,
-			bool *link_up, u8 *mac_speed, u16 *link_speed, u32 dom);
+			u8 *mac_speed, u16 *link_speed, u32 dom);
 extern int be_cmd_reset(struct be_adapter *adapter);
 extern int be_cmd_get_stats(struct be_adapter *adapter,
 			struct be_dma_mem *nonemb_cmd);
@@ -1497,9 +1450,7 @@ extern int be_cmd_modify_eqd(struct be_adapter *adapter, u32 eq_id, u32 eqd);
 extern int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id,
 			u16 *vtag_array, u32 num, bool untagged,
 			bool promiscuous);
-extern int be_cmd_promiscuous_config(struct be_adapter *adapter, bool en);
-extern int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
-			struct net_device *netdev, struct be_dma_mem *mem);
+extern int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 status);
 extern int be_cmd_set_flow_control(struct be_adapter *adapter,
 			u32 tx_fc, u32 rx_fc);
 extern int be_cmd_get_flow_control(struct be_adapter *adapter,
@@ -1540,7 +1491,7 @@ extern int be_cmd_get_seeprom_data(struct be_adapter *adapter,
 extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
 				u8 loopback_type, u8 enable);
 extern int be_cmd_get_phy_info(struct be_adapter *adapter,
-		struct be_dma_mem *cmd);
+				struct be_phy_info *phy_info);
 extern int be_cmd_set_qos(struct be_adapter *adapter, u32 bps, u32 domain);
 extern void be_detect_dump_ue(struct be_adapter *adapter);
 extern int be_cmd_get_die_temperature(struct be_adapter *adapter);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 7fd8130d86ea..f144a6f99862 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -26,33 +26,18 @@ struct be_ethtool_stat {
 	int offset;
 };
 
-enum {NETSTAT, DRVSTAT_TX, DRVSTAT_RX, ERXSTAT,
-			DRVSTAT};
+enum {DRVSTAT_TX, DRVSTAT_RX, DRVSTAT};
 #define FIELDINFO(_struct, field) FIELD_SIZEOF(_struct, field), \
 					offsetof(_struct, field)
-#define NETSTAT_INFO(field) 	#field, NETSTAT,\
-					FIELDINFO(struct net_device_stats,\
-						field)
 #define DRVSTAT_TX_INFO(field)	#field, DRVSTAT_TX,\
 					FIELDINFO(struct be_tx_stats, field)
 #define DRVSTAT_RX_INFO(field)	#field, DRVSTAT_RX,\
 					FIELDINFO(struct be_rx_stats, field)
-#define ERXSTAT_INFO(field)	#field, ERXSTAT,\
-					FIELDINFO(struct be_erx_stats_v1, field)
 #define	DRVSTAT_INFO(field)	#field, DRVSTAT,\
-					FIELDINFO(struct be_drv_stats, \
-						field)
+					FIELDINFO(struct be_drv_stats, field)
 
 static const struct be_ethtool_stat et_stats[] = {
-	{NETSTAT_INFO(rx_packets)},
-	{NETSTAT_INFO(tx_packets)},
-	{NETSTAT_INFO(rx_bytes)},
-	{NETSTAT_INFO(tx_bytes)},
-	{NETSTAT_INFO(rx_errors)},
-	{NETSTAT_INFO(tx_errors)},
-	{NETSTAT_INFO(rx_dropped)},
-	{NETSTAT_INFO(tx_dropped)},
-	{DRVSTAT_INFO(be_tx_events)},
+	{DRVSTAT_INFO(tx_events)},
 	{DRVSTAT_INFO(rx_crc_errors)},
 	{DRVSTAT_INFO(rx_alignment_symbol_errors)},
 	{DRVSTAT_INFO(rx_pause_frames)},
@@ -71,9 +56,6 @@ static const struct be_ethtool_stat et_stats[] = {
 	{DRVSTAT_INFO(rx_ip_checksum_errs)},
 	{DRVSTAT_INFO(rx_tcp_checksum_errs)},
 	{DRVSTAT_INFO(rx_udp_checksum_errs)},
-	{DRVSTAT_INFO(rx_switched_unicast_packets)},
-	{DRVSTAT_INFO(rx_switched_multicast_packets)},
-	{DRVSTAT_INFO(rx_switched_broadcast_packets)},
 	{DRVSTAT_INFO(tx_pauseframes)},
 	{DRVSTAT_INFO(tx_controlframes)},
 	{DRVSTAT_INFO(rx_priority_pause_frames)},
@@ -92,28 +74,33 @@ static const struct be_ethtool_stat et_stats[] = {
 };
 #define ETHTOOL_STATS_NUM ARRAY_SIZE(et_stats)
 
-/* Stats related to multi RX queues */
+/* Stats related to multi RX queues: get_stats routine assumes bytes, pkts
+ * are first and second members respectively.
+ */
 static const struct be_ethtool_stat et_rx_stats[] = {
-	{DRVSTAT_RX_INFO(rx_bytes)},
-	{DRVSTAT_RX_INFO(rx_pkts)},
-	{DRVSTAT_RX_INFO(rx_rate)},
+	{DRVSTAT_RX_INFO(rx_bytes)},/* If moving this member see above note */
+	{DRVSTAT_RX_INFO(rx_pkts)}, /* If moving this member see above note */
 	{DRVSTAT_RX_INFO(rx_polls)},
 	{DRVSTAT_RX_INFO(rx_events)},
 	{DRVSTAT_RX_INFO(rx_compl)},
 	{DRVSTAT_RX_INFO(rx_mcast_pkts)},
 	{DRVSTAT_RX_INFO(rx_post_fail)},
-	{DRVSTAT_RX_INFO(rx_dropped)},
-	{ERXSTAT_INFO(rx_drops_no_fragments)}
+	{DRVSTAT_RX_INFO(rx_drops_no_skbs)},
+	{DRVSTAT_RX_INFO(rx_drops_no_frags)}
 };
 #define ETHTOOL_RXSTATS_NUM (ARRAY_SIZE(et_rx_stats))
 
-/* Stats related to multi TX queues */
+/* Stats related to multi TX queues: get_stats routine assumes compl is the
+ * first member
+ */
 static const struct be_ethtool_stat et_tx_stats[] = {
-	{DRVSTAT_TX_INFO(be_tx_rate)},
-	{DRVSTAT_TX_INFO(be_tx_reqs)},
-	{DRVSTAT_TX_INFO(be_tx_wrbs)},
-	{DRVSTAT_TX_INFO(be_tx_stops)},
-	{DRVSTAT_TX_INFO(be_tx_compl)}
+	{DRVSTAT_TX_INFO(tx_compl)}, /* If moving this member see above note */
+	{DRVSTAT_TX_INFO(tx_bytes)},
+	{DRVSTAT_TX_INFO(tx_pkts)},
+	{DRVSTAT_TX_INFO(tx_reqs)},
+	{DRVSTAT_TX_INFO(tx_wrbs)},
+	{DRVSTAT_TX_INFO(tx_compl)},
+	{DRVSTAT_TX_INFO(tx_stops)}
 };
 #define ETHTOOL_TXSTATS_NUM (ARRAY_SIZE(et_tx_stats))
 
@@ -260,50 +247,49 @@ be_get_ethtool_stats(struct net_device *netdev,
 	struct be_adapter *adapter = netdev_priv(netdev);
 	struct be_rx_obj *rxo;
 	struct be_tx_obj *txo;
-	void *p = NULL;
-	int i, j, base;
+	void *p;
+	unsigned int i, j, base = 0, start;
 
 	for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
-		switch (et_stats[i].type) {
-		case NETSTAT:
-			p = &netdev->stats;
-			break;
-		case DRVSTAT:
-			p = &adapter->drv_stats;
-			break;
-		}
-
-		p = (u8 *)p + et_stats[i].offset;
-		data[i] = (et_stats[i].size == sizeof(u64)) ?
-				*(u64 *)p: *(u32 *)p;
+		p = (u8 *)&adapter->drv_stats + et_stats[i].offset;
+		data[i] = *(u32 *)p;
 	}
+	base += ETHTOOL_STATS_NUM;
 
-	base = ETHTOOL_STATS_NUM;
 	for_all_rx_queues(adapter, rxo, j) {
-		for (i = 0; i < ETHTOOL_RXSTATS_NUM; i++) {
-			switch (et_rx_stats[i].type) {
-			case DRVSTAT_RX:
-				p = (u8 *)&rxo->stats + et_rx_stats[i].offset;
-				break;
-			case ERXSTAT:
-				p = (u32 *)be_erx_stats_from_cmd(adapter) +
-								rxo->q.id;
-				break;
-			}
-			data[base + j * ETHTOOL_RXSTATS_NUM + i] =
-				(et_rx_stats[i].size == sizeof(u64)) ?
-					*(u64 *)p: *(u32 *)p;
+		struct be_rx_stats *stats = rx_stats(rxo);
+
+		do {
+			start = u64_stats_fetch_begin_bh(&stats->sync);
+			data[base] = stats->rx_bytes;
+			data[base + 1] = stats->rx_pkts;
+		} while (u64_stats_fetch_retry_bh(&stats->sync, start));
+
+		for (i = 2; i < ETHTOOL_RXSTATS_NUM; i++) {
+			p = (u8 *)stats + et_rx_stats[i].offset;
+			data[base + i] = *(u32 *)p;
 		}
+		base += ETHTOOL_RXSTATS_NUM;
 	}
 
-	base = ETHTOOL_STATS_NUM + adapter->num_rx_qs * ETHTOOL_RXSTATS_NUM;
 	for_all_tx_queues(adapter, txo, j) {
-		for (i = 0; i < ETHTOOL_TXSTATS_NUM; i++) {
-			p = (u8 *)&txo->stats + et_tx_stats[i].offset;
-			data[base + j * ETHTOOL_TXSTATS_NUM + i] =
-				(et_tx_stats[i].size == sizeof(u64)) ?
-					*(u64 *)p: *(u32 *)p;
-		}
+		struct be_tx_stats *stats = tx_stats(txo);
+
+		do {
+			start = u64_stats_fetch_begin_bh(&stats->sync_compl);
+			data[base] = stats->tx_compl;
+		} while (u64_stats_fetch_retry_bh(&stats->sync_compl, start));
+
+		do {
+			start = u64_stats_fetch_begin_bh(&stats->sync);
+			for (i = 1; i < ETHTOOL_TXSTATS_NUM; i++) {
+				p = (u8 *)stats + et_tx_stats[i].offset;
+				data[base + i] =
+					(et_tx_stats[i].size == sizeof(u64)) ?
+						*(u64 *)p : *(u32 *)p;
+			}
+		} while (u64_stats_fetch_retry_bh(&stats->sync, start));
+		base += ETHTOOL_TXSTATS_NUM;
 	}
 }
 
@@ -363,19 +349,15 @@ static int be_get_sset_count(struct net_device *netdev, int stringset)
 static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
-	struct be_dma_mem phy_cmd;
-	struct be_cmd_resp_get_phy_info *resp;
+	struct be_phy_info phy_info;
 	u8 mac_speed = 0;
 	u16 link_speed = 0;
-	bool link_up = false;
 	int status;
-	u16 intf_type;
 
 	if ((adapter->link_speed < 0) || (!(netdev->flags & IFF_UP))) {
-		status = be_cmd_link_status_query(adapter, &link_up,
-						&mac_speed, &link_speed, 0);
+		status = be_cmd_link_status_query(adapter, &mac_speed,
+						&link_speed, 0);
 
-		be_link_status_update(adapter, link_up);
 		/* link_speed is in units of 10 Mbps */
 		if (link_speed) {
 			ethtool_cmd_speed_set(ecmd, link_speed*10);
@@ -399,20 +381,9 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 			}
 		}
 
-		phy_cmd.size = sizeof(struct be_cmd_req_get_phy_info);
-		phy_cmd.va = dma_alloc_coherent(&adapter->pdev->dev,
-						phy_cmd.size, &phy_cmd.dma,
-						GFP_KERNEL);
-		if (!phy_cmd.va) {
-			dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
-			return -ENOMEM;
-		}
-		status = be_cmd_get_phy_info(adapter, &phy_cmd);
+		status = be_cmd_get_phy_info(adapter, &phy_info);
 		if (!status) {
-			resp = phy_cmd.va;
-			intf_type = le16_to_cpu(resp->interface_type);
-
-			switch (intf_type) {
+			switch (phy_info.interface_type) {
 			case PHY_TYPE_XFP_10GB:
 			case PHY_TYPE_SFP_1GB:
 			case PHY_TYPE_SFP_PLUS_10GB:
@@ -423,7 +394,7 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 				break;
 			}
 
-			switch (intf_type) {
+			switch (phy_info.interface_type) {
 			case PHY_TYPE_KR_10GB:
 			case PHY_TYPE_KX4_10GB:
 				ecmd->autoneg = AUTONEG_ENABLE;
@@ -441,8 +412,6 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 		adapter->port_type = ecmd->port;
 		adapter->transceiver = ecmd->transceiver;
 		adapter->autoneg = ecmd->autoneg;
-		dma_free_coherent(&adapter->pdev->dev, phy_cmd.size, phy_cmd.va,
-				  phy_cmd.dma);
 	} else {
 		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 		ecmd->port = adapter->port_type;
@@ -631,7 +600,6 @@ static void
 be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
-	bool link_up;
 	u8 mac_speed = 0;
 	u16 qos_link_speed = 0;
 
@@ -657,7 +625,7 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 		test->flags |= ETH_TEST_FL_FAILED;
 	}
 
-	if (be_cmd_link_status_query(adapter, &link_up, &mac_speed,
+	if (be_cmd_link_status_query(adapter, &mac_speed,
 				&qos_link_speed, 0) != 0) {
 		test->flags |= ETH_TEST_FL_FAILED;
 		data[4] = -1;
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 53d658afea2a..fbc8a915519e 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -175,18 +175,24 @@
 #define IMG_TYPE_FCOE_FW_ACTIVE		10
 #define IMG_TYPE_FCOE_FW_BACKUP 	11
 #define IMG_TYPE_NCSI_FW		13
+#define IMG_TYPE_PHY_FW			99
+#define TN_8022				13
 
+#define ILLEGAL_IOCTL_REQ		2
+#define FLASHROM_OPER_PHY_FLASH		9
+#define FLASHROM_OPER_PHY_SAVE		10
 #define FLASHROM_OPER_FLASH		1
 #define FLASHROM_OPER_SAVE		2
 #define FLASHROM_OPER_REPORT		4
 
-#define FLASH_IMAGE_MAX_SIZE_g2            (1310720) /* Max firmware image sz */
-#define FLASH_BIOS_IMAGE_MAX_SIZE_g2       (262144)  /* Max OPTION ROM img sz */
-#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g2	  (262144)  /* Max Redboot image sz */
-#define FLASH_IMAGE_MAX_SIZE_g3            (2097152) /* Max fw image size */
-#define FLASH_BIOS_IMAGE_MAX_SIZE_g3       (524288)  /* Max OPTION ROM img sz */
-#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	  (1048576)  /* Max Redboot image sz */
-#define FLASH_NCSI_IMAGE_MAX_SIZE_g3       (262144)  /* Max NSCI image sz */
+#define FLASH_IMAGE_MAX_SIZE_g2		(1310720) /* Max firmware image size */
+#define FLASH_BIOS_IMAGE_MAX_SIZE_g2	(262144)  /* Max OPTION ROM image sz */
+#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g2	(262144)  /* Max Redboot image sz    */
+#define FLASH_IMAGE_MAX_SIZE_g3		(2097152) /* Max firmware image size */
+#define FLASH_BIOS_IMAGE_MAX_SIZE_g3	(524288)  /* Max OPTION ROM image sz */
+#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	(1048576)  /* Max Redboot image sz    */
+#define FLASH_NCSI_IMAGE_MAX_SIZE_g3	(262144)
+#define FLASH_PHY_FW_IMAGE_MAX_SIZE_g3	262144
 
 #define FLASH_NCSI_MAGIC		(0x16032009)
 #define FLASH_NCSI_DISABLED		(0)
@@ -213,6 +219,7 @@
 #define FLASH_PXE_BIOS_START_g3            (13107200)
 #define FLASH_FCoE_BIOS_START_g3           (13631488)
 #define FLASH_REDBOOT_START_g3             (262144)
+#define FLASH_PHY_FW_START_g3		   1310720
 
 /************* Rx Packet Type Encoding **************/
 #define BE_UNICAST_PACKET		0
diff --git a/drivers/net/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index c411bb1845fd..3d55b4767ae4 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -141,13 +141,15 @@ static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q,
 
 static void be_intr_set(struct be_adapter *adapter, bool enable)
 {
-	u8 __iomem *addr = adapter->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
-	u32 reg = ioread32(addr);
-	u32 enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+	u32 reg, enabled;
 
 	if (adapter->eeh_err)
 		return;
 
+	pci_read_config_dword(adapter->pdev, PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET,
+				&reg);
+	enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+
 	if (!enabled && enable)
 		reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
 	else if (enabled && !enable)
@@ -155,7 +157,8 @@ static void be_intr_set(struct be_adapter *adapter, bool enable)
 	else
 		return;
 
-	iowrite32(reg, addr);
+	pci_write_config_dword(adapter->pdev,
+			PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET, reg);
 }
 
 static void be_rxq_notify(struct be_adapter *adapter, u16 qid, u16 posted)
@@ -245,14 +248,14 @@ netdev_addr:
 
 static void populate_be2_stats(struct be_adapter *adapter)
 {
-
-	struct be_drv_stats *drvs = &adapter->drv_stats;
-	struct be_pmem_stats *pmem_sts = be_pmem_stats_from_cmd(adapter);
+	struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+	struct be_pmem_stats *pmem_sts = &hw_stats->pmem;
+	struct be_rxf_stats_v0 *rxf_stats = &hw_stats->rxf;
 	struct be_port_rxf_stats_v0 *port_stats =
-		be_port_rxf_stats_from_cmd(adapter);
-	struct be_rxf_stats_v0 *rxf_stats =
-		be_rxf_stats_from_cmd(adapter);
+					&rxf_stats->port[adapter->port_num];
+	struct be_drv_stats *drvs = &adapter->drv_stats;
 
+	be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats));
 	drvs->rx_pause_frames = port_stats->rx_pause_frames;
 	drvs->rx_crc_errors = port_stats->rx_crc_errors;
 	drvs->rx_control_frames = port_stats->rx_control_frames;
@@ -267,12 +270,10 @@ static void populate_be2_stats(struct be_adapter *adapter)
 	drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small;
 	drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short;
 	drvs->rx_out_range_errors = port_stats->rx_out_range_errors;
-	drvs->rx_input_fifo_overflow_drop =
-		port_stats->rx_input_fifo_overflow;
+	drvs->rx_input_fifo_overflow_drop = port_stats->rx_input_fifo_overflow;
 	drvs->rx_dropped_header_too_small =
 		port_stats->rx_dropped_header_too_small;
-	drvs->rx_address_match_errors =
-		port_stats->rx_address_match_errors;
+	drvs->rx_address_match_errors = port_stats->rx_address_match_errors;
 	drvs->rx_alignment_symbol_errors =
 		port_stats->rx_alignment_symbol_errors;
 
@@ -280,36 +281,30 @@ static void populate_be2_stats(struct be_adapter *adapter)
 	drvs->tx_controlframes = port_stats->tx_controlframes;
 
 	if (adapter->port_num)
-		drvs->jabber_events =
-			rxf_stats->port1_jabber_events;
+		drvs->jabber_events = rxf_stats->port1_jabber_events;
 	else
-		drvs->jabber_events =
-			rxf_stats->port0_jabber_events;
+		drvs->jabber_events = rxf_stats->port0_jabber_events;
 	drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf;
 	drvs->rx_drops_no_txpb = rxf_stats->rx_drops_no_txpb;
 	drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr;
 	drvs->rx_drops_invalid_ring = rxf_stats->rx_drops_invalid_ring;
 	drvs->forwarded_packets = rxf_stats->forwarded_packets;
 	drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
-	drvs->rx_drops_no_tpre_descr =
-		rxf_stats->rx_drops_no_tpre_descr;
-	drvs->rx_drops_too_many_frags =
-		rxf_stats->rx_drops_too_many_frags;
+	drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr;
+	drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags;
 	adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
 }
 
 static void populate_be3_stats(struct be_adapter *adapter)
 {
-	struct be_drv_stats *drvs = &adapter->drv_stats;
-	struct be_pmem_stats *pmem_sts = be_pmem_stats_from_cmd(adapter);
-
-	struct be_rxf_stats_v1 *rxf_stats =
-		be_rxf_stats_from_cmd(adapter);
+	struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+	struct be_pmem_stats *pmem_sts = &hw_stats->pmem;
+	struct be_rxf_stats_v1 *rxf_stats = &hw_stats->rxf;
 	struct be_port_rxf_stats_v1 *port_stats =
-		be_port_rxf_stats_from_cmd(adapter);
+					&rxf_stats->port[adapter->port_num];
+	struct be_drv_stats *drvs = &adapter->drv_stats;
 
-	drvs->rx_priority_pause_frames = 0;
-	drvs->pmem_fifo_overflow_drop = 0;
+	be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats));
 	drvs->rx_pause_frames = port_stats->rx_pause_frames;
 	drvs->rx_crc_errors = port_stats->rx_crc_errors;
 	drvs->rx_control_frames = port_stats->rx_control_frames;
@@ -327,12 +322,10 @@ static void populate_be3_stats(struct be_adapter *adapter)
 		port_stats->rx_dropped_header_too_small;
 	drvs->rx_input_fifo_overflow_drop =
 		port_stats->rx_input_fifo_overflow_drop;
-	drvs->rx_address_match_errors =
-		port_stats->rx_address_match_errors;
+	drvs->rx_address_match_errors = port_stats->rx_address_match_errors;
 	drvs->rx_alignment_symbol_errors =
 		port_stats->rx_alignment_symbol_errors;
-	drvs->rxpp_fifo_overflow_drop =
-		port_stats->rxpp_fifo_overflow_drop;
+	drvs->rxpp_fifo_overflow_drop = port_stats->rxpp_fifo_overflow_drop;
 	drvs->tx_pauseframes = port_stats->tx_pauseframes;
 	drvs->tx_controlframes = port_stats->tx_controlframes;
 	drvs->jabber_events = port_stats->jabber_events;
@@ -342,10 +335,8 @@ static void populate_be3_stats(struct be_adapter *adapter)
 	drvs->rx_drops_invalid_ring = rxf_stats->rx_drops_invalid_ring;
 	drvs->forwarded_packets = rxf_stats->forwarded_packets;
 	drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
-	drvs->rx_drops_no_tpre_descr =
-		rxf_stats->rx_drops_no_tpre_descr;
-	drvs->rx_drops_too_many_frags =
-		rxf_stats->rx_drops_too_many_frags;
+	drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr;
+	drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags;
 	adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
 }
 
@@ -353,22 +344,15 @@ static void populate_lancer_stats(struct be_adapter *adapter)
 {
 
 	struct be_drv_stats *drvs = &adapter->drv_stats;
-	struct lancer_cmd_pport_stats *pport_stats = pport_stats_from_cmd
-						(adapter);
-	drvs->rx_priority_pause_frames = 0;
-	drvs->pmem_fifo_overflow_drop = 0;
-	drvs->rx_pause_frames =
-		make_64bit_val(pport_stats->rx_pause_frames_hi,
-				 pport_stats->rx_pause_frames_lo);
-	drvs->rx_crc_errors = make_64bit_val(pport_stats->rx_crc_errors_hi,
-						pport_stats->rx_crc_errors_lo);
-	drvs->rx_control_frames =
-			make_64bit_val(pport_stats->rx_control_frames_hi,
-			pport_stats->rx_control_frames_lo);
+	struct lancer_pport_stats *pport_stats =
+					pport_stats_from_cmd(adapter);
+
+	be_dws_le_to_cpu(pport_stats, sizeof(*pport_stats));
+	drvs->rx_pause_frames = pport_stats->rx_pause_frames_lo;
+	drvs->rx_crc_errors = pport_stats->rx_crc_errors_lo;
+	drvs->rx_control_frames = pport_stats->rx_control_frames_lo;
 	drvs->rx_in_range_errors = pport_stats->rx_in_range_errors;
-	drvs->rx_frame_too_long =
-		make_64bit_val(pport_stats->rx_internal_mac_errors_hi,
-					pport_stats->rx_frames_too_long_lo);
+	drvs->rx_frame_too_long = pport_stats->rx_frames_too_long_lo;
 	drvs->rx_dropped_runt = pport_stats->rx_dropped_runt;
 	drvs->rx_ip_checksum_errs = pport_stats->rx_ip_checksum_errors;
 	drvs->rx_tcp_checksum_errs = pport_stats->rx_tcp_checksum_errors;
@@ -382,32 +366,36 @@ static void populate_lancer_stats(struct be_adapter *adapter)
 				pport_stats->rx_dropped_header_too_small;
 	drvs->rx_input_fifo_overflow_drop = pport_stats->rx_fifo_overflow;
 	drvs->rx_address_match_errors = pport_stats->rx_address_match_errors;
-	drvs->rx_alignment_symbol_errors =
-		make_64bit_val(pport_stats->rx_symbol_errors_hi,
-				pport_stats->rx_symbol_errors_lo);
+	drvs->rx_alignment_symbol_errors = pport_stats->rx_symbol_errors_lo;
 	drvs->rxpp_fifo_overflow_drop = pport_stats->rx_fifo_overflow;
-	drvs->tx_pauseframes = make_64bit_val(pport_stats->tx_pause_frames_hi,
-					pport_stats->tx_pause_frames_lo);
-	drvs->tx_controlframes =
-		make_64bit_val(pport_stats->tx_control_frames_hi,
-				pport_stats->tx_control_frames_lo);
+	drvs->tx_pauseframes = pport_stats->tx_pause_frames_lo;
+	drvs->tx_controlframes = pport_stats->tx_control_frames_lo;
 	drvs->jabber_events = pport_stats->rx_jabbers;
-	drvs->rx_drops_no_pbuf = 0;
-	drvs->rx_drops_no_txpb = 0;
-	drvs->rx_drops_no_erx_descr = 0;
 	drvs->rx_drops_invalid_ring = pport_stats->rx_drops_invalid_queue;
-	drvs->forwarded_packets = make_64bit_val(pport_stats->num_forwards_hi,
-						pport_stats->num_forwards_lo);
-	drvs->rx_drops_mtu = make_64bit_val(pport_stats->rx_drops_mtu_hi,
-						pport_stats->rx_drops_mtu_lo);
-	drvs->rx_drops_no_tpre_descr = 0;
+	drvs->forwarded_packets = pport_stats->num_forwards_lo;
+	drvs->rx_drops_mtu = pport_stats->rx_drops_mtu_lo;
 	drvs->rx_drops_too_many_frags =
-		make_64bit_val(pport_stats->rx_drops_too_many_frags_hi,
-				pport_stats->rx_drops_too_many_frags_lo);
+				pport_stats->rx_drops_too_many_frags_lo;
+}
+
+static void accumulate_16bit_val(u32 *acc, u16 val)
+{
+#define lo(x)			(x & 0xFFFF)
+#define hi(x)			(x & 0xFFFF0000)
+	bool wrapped = val < lo(*acc);
+	u32 newacc = hi(*acc) + val;
+
+	if (wrapped)
+		newacc += 65536;
+	ACCESS_ONCE(*acc) = newacc;
 }
 
 void be_parse_stats(struct be_adapter *adapter)
 {
+	struct be_erx_stats_v1 *erx = be_erx_stats_from_cmd(adapter);
+	struct be_rx_obj *rxo;
+	int i;
+
 	if (adapter->generation == BE_GEN3) {
 		if (lancer_chip(adapter))
 			populate_lancer_stats(adapter);
@@ -416,50 +404,55 @@ void be_parse_stats(struct be_adapter *adapter)
 	} else {
 		populate_be2_stats(adapter);
 	}
+
+	/* as erx_v1 is longer than v0, ok to use v1 defn for v0 access */
+	for_all_rx_queues(adapter, rxo, i) {
+		/* below erx HW counter can actually wrap around after
+		 * 65535. Driver accumulates a 32-bit value
+		 */
+		accumulate_16bit_val(&rx_stats(rxo)->rx_drops_no_frags,
+				(u16)erx->rx_drops_no_fragments[rxo->q.id]);
+	}
 }
 
-void netdev_stats_update(struct be_adapter *adapter)
+static struct rtnl_link_stats64 *be_get_stats64(struct net_device *netdev,
+					struct rtnl_link_stats64 *stats)
 {
+	struct be_adapter *adapter = netdev_priv(netdev);
 	struct be_drv_stats *drvs = &adapter->drv_stats;
-	struct net_device_stats *dev_stats = &adapter->netdev->stats;
 	struct be_rx_obj *rxo;
 	struct be_tx_obj *txo;
-	unsigned long pkts = 0, bytes = 0, mcast = 0, drops = 0;
+	u64 pkts, bytes;
+	unsigned int start;
 	int i;
 
 	for_all_rx_queues(adapter, rxo, i) {
-		pkts += rx_stats(rxo)->rx_pkts;
-		bytes += rx_stats(rxo)->rx_bytes;
-		mcast += rx_stats(rxo)->rx_mcast_pkts;
-		drops += rx_stats(rxo)->rx_dropped;
-		/*  no space in linux buffers: best possible approximation */
-		if (adapter->generation == BE_GEN3) {
-			if (!(lancer_chip(adapter))) {
-				struct be_erx_stats_v1 *erx =
-					be_erx_stats_from_cmd(adapter);
-				drops += erx->rx_drops_no_fragments[rxo->q.id];
-			}
-		} else {
-			struct be_erx_stats_v0 *erx =
-					be_erx_stats_from_cmd(adapter);
-			drops += erx->rx_drops_no_fragments[rxo->q.id];
-		}
+		const struct be_rx_stats *rx_stats = rx_stats(rxo);
+		do {
+			start = u64_stats_fetch_begin_bh(&rx_stats->sync);
+			pkts = rx_stats(rxo)->rx_pkts;
+			bytes = rx_stats(rxo)->rx_bytes;
+		} while (u64_stats_fetch_retry_bh(&rx_stats->sync, start));
+		stats->rx_packets += pkts;
+		stats->rx_bytes += bytes;
+		stats->multicast += rx_stats(rxo)->rx_mcast_pkts;
+		stats->rx_dropped += rx_stats(rxo)->rx_drops_no_skbs +
+					rx_stats(rxo)->rx_drops_no_frags;
 	}
-	dev_stats->rx_packets = pkts;
-	dev_stats->rx_bytes = bytes;
-	dev_stats->multicast = mcast;
-	dev_stats->rx_dropped = drops;
 
-	pkts = bytes = 0;
 	for_all_tx_queues(adapter, txo, i) {
-		pkts += tx_stats(txo)->be_tx_pkts;
-		bytes += tx_stats(txo)->be_tx_bytes;
+		const struct be_tx_stats *tx_stats = tx_stats(txo);
+		do {
+			start = u64_stats_fetch_begin_bh(&tx_stats->sync);
+			pkts = tx_stats(txo)->tx_pkts;
+			bytes = tx_stats(txo)->tx_bytes;
+		} while (u64_stats_fetch_retry_bh(&tx_stats->sync, start));
+		stats->tx_packets += pkts;
+		stats->tx_bytes += bytes;
 	}
-	dev_stats->tx_packets = pkts;
-	dev_stats->tx_bytes = bytes;
 
 	/* bad pkts received */
-	dev_stats->rx_errors = drvs->rx_crc_errors +
+	stats->rx_errors = drvs->rx_crc_errors +
 		drvs->rx_alignment_symbol_errors +
 		drvs->rx_in_range_errors +
 		drvs->rx_out_range_errors +
@@ -468,115 +461,38 @@ void netdev_stats_update(struct be_adapter *adapter)
 		drvs->rx_dropped_too_short +
 		drvs->rx_dropped_header_too_small +
 		drvs->rx_dropped_tcp_length +
-		drvs->rx_dropped_runt +
-		drvs->rx_tcp_checksum_errs +
-		drvs->rx_ip_checksum_errs +
-		drvs->rx_udp_checksum_errs;
+		drvs->rx_dropped_runt;
 
 	/* detailed rx errors */
-	dev_stats->rx_length_errors = drvs->rx_in_range_errors +
+	stats->rx_length_errors = drvs->rx_in_range_errors +
 		drvs->rx_out_range_errors +
 		drvs->rx_frame_too_long;
 
-	dev_stats->rx_crc_errors = drvs->rx_crc_errors;
+	stats->rx_crc_errors = drvs->rx_crc_errors;
 
 	/* frame alignment errors */
-	dev_stats->rx_frame_errors = drvs->rx_alignment_symbol_errors;
+	stats->rx_frame_errors = drvs->rx_alignment_symbol_errors;
 
 	/* receiver fifo overrun */
 	/* drops_no_pbuf is no per i/f, it's per BE card */
-	dev_stats->rx_fifo_errors = drvs->rxpp_fifo_overflow_drop +
+	stats->rx_fifo_errors = drvs->rxpp_fifo_overflow_drop +
 				drvs->rx_input_fifo_overflow_drop +
 				drvs->rx_drops_no_pbuf;
+	return stats;
 }
 
-void be_link_status_update(struct be_adapter *adapter, bool link_up)
+void be_link_status_update(struct be_adapter *adapter, u32 link_status)
 {
 	struct net_device *netdev = adapter->netdev;
 
-	/* If link came up or went down */
-	if (adapter->link_up != link_up) {
-		adapter->link_speed = -1;
-		if (link_up) {
-			netif_carrier_on(netdev);
-			printk(KERN_INFO "%s: Link up\n", netdev->name);
-		} else {
-			netif_carrier_off(netdev);
-			printk(KERN_INFO "%s: Link down\n", netdev->name);
-		}
-		adapter->link_up = link_up;
-	}
-}
-
-/* Update the EQ delay n BE based on the RX frags consumed / sec */
-static void be_rx_eqd_update(struct be_adapter *adapter, struct be_rx_obj *rxo)
-{
-	struct be_eq_obj *rx_eq = &rxo->rx_eq;
-	struct be_rx_stats *stats = &rxo->stats;
-	ulong now = jiffies;
-	u32 eqd;
-
-	if (!rx_eq->enable_aic)
-		return;
-
-	/* Wrapped around */
-	if (time_before(now, stats->rx_fps_jiffies)) {
-		stats->rx_fps_jiffies = now;
-		return;
-	}
-
-	/* Update once a second */
-	if ((now - stats->rx_fps_jiffies) < HZ)
-		return;
-
-	stats->rx_fps = (stats->rx_frags - stats->prev_rx_frags) /
-			((now - stats->rx_fps_jiffies) / HZ);
-
-	stats->rx_fps_jiffies = now;
-	stats->prev_rx_frags = stats->rx_frags;
-	eqd = stats->rx_fps / 110000;
-	eqd = eqd << 3;
-	if (eqd > rx_eq->max_eqd)
-		eqd = rx_eq->max_eqd;
-	if (eqd < rx_eq->min_eqd)
-		eqd = rx_eq->min_eqd;
-	if (eqd < 10)
-		eqd = 0;
-	if (eqd != rx_eq->cur_eqd)
-		be_cmd_modify_eqd(adapter, rx_eq->q.id, eqd);
-
-	rx_eq->cur_eqd = eqd;
-}
-
-static u32 be_calc_rate(u64 bytes, unsigned long ticks)
-{
-	u64 rate = bytes;
-
-	do_div(rate, ticks / HZ);
-	rate <<= 3;			/* bytes/sec -> bits/sec */
-	do_div(rate, 1000000ul);	/* MB/Sec */
-
-	return rate;
-}
-
-static void be_tx_rate_update(struct be_tx_obj *txo)
-{
-	struct be_tx_stats *stats = tx_stats(txo);
-	ulong now = jiffies;
-
-	/* Wrapped around? */
-	if (time_before(now, stats->be_tx_jiffies)) {
-		stats->be_tx_jiffies = now;
-		return;
-	}
-
-	/* Update tx rate once in two seconds */
-	if ((now - stats->be_tx_jiffies) > 2 * HZ) {
-		stats->be_tx_rate = be_calc_rate(stats->be_tx_bytes
-						  - stats->be_tx_bytes_prev,
-						 now - stats->be_tx_jiffies);
-		stats->be_tx_jiffies = now;
-		stats->be_tx_bytes_prev = stats->be_tx_bytes;
+	/* when link status changes, link speed must be re-queried from card */
+	adapter->link_speed = -1;
+	if ((link_status & LINK_STATUS_MASK) == LINK_UP) {
+		netif_carrier_on(netdev);
+		dev_info(&adapter->pdev->dev, "%s: Link up\n", netdev->name);
+	} else {
+		netif_carrier_off(netdev);
+		dev_info(&adapter->pdev->dev, "%s: Link down\n", netdev->name);
 	}
 }
 
@@ -585,12 +501,14 @@ static void be_tx_stats_update(struct be_tx_obj *txo,
 {
 	struct be_tx_stats *stats = tx_stats(txo);
 
-	stats->be_tx_reqs++;
-	stats->be_tx_wrbs += wrb_cnt;
-	stats->be_tx_bytes += copied;
-	stats->be_tx_pkts += (gso_segs ? gso_segs : 1);
+	u64_stats_update_begin(&stats->sync);
+	stats->tx_reqs++;
+	stats->tx_wrbs += wrb_cnt;
+	stats->tx_bytes += copied;
+	stats->tx_pkts += (gso_segs ? gso_segs : 1);
 	if (stopped)
-		stats->be_tx_stops++;
+		stats->tx_stops++;
+	u64_stats_update_end(&stats->sync);
 }
 
 /* Determine number of WRB entries needed to xmit data in an skb */
@@ -829,6 +747,10 @@ static int be_vid_config(struct be_adapter *adapter, bool vf, u32 vf_num)
 		status = be_cmd_vlan_config(adapter, if_handle, vtag, 1, 1, 0);
 	}
 
+	/* No need to further configure vids if in promiscuous mode */
+	if (adapter->promiscuous)
+		return 0;
+
 	if (adapter->vlans_added <= adapter->max_vlans)  {
 		/* Construct VLAN Table to give to HW */
 		for (i = 0; i < VLAN_N_VID; i++) {
@@ -879,7 +801,7 @@ static void be_set_multicast_list(struct net_device *netdev)
 	struct be_adapter *adapter = netdev_priv(netdev);
 
 	if (netdev->flags & IFF_PROMISC) {
-		be_cmd_promiscuous_config(adapter, true);
+		be_cmd_rx_filter(adapter, IFF_PROMISC, ON);
 		adapter->promiscuous = true;
 		goto done;
 	}
@@ -887,19 +809,20 @@ static void be_set_multicast_list(struct net_device *netdev)
 	/* BE was previously in promiscuous mode; disable it */
 	if (adapter->promiscuous) {
 		adapter->promiscuous = false;
-		be_cmd_promiscuous_config(adapter, false);
+		be_cmd_rx_filter(adapter, IFF_PROMISC, OFF);
+
+		if (adapter->vlans_added)
+			be_vid_config(adapter, false, 0);
 	}
 
 	/* Enable multicast promisc if num configured exceeds what we support */
 	if (netdev->flags & IFF_ALLMULTI ||
-	    netdev_mc_count(netdev) > BE_MAX_MC) {
-		be_cmd_multicast_set(adapter, adapter->if_handle, NULL,
-				&adapter->mc_cmd_mem);
+			netdev_mc_count(netdev) > BE_MAX_MC) {
+		be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON);
 		goto done;
 	}
 
-	be_cmd_multicast_set(adapter, adapter->if_handle, netdev,
-		&adapter->mc_cmd_mem);
+	be_cmd_rx_filter(adapter, IFF_MULTICAST, ON);
 done:
 	return;
 }
@@ -1005,10 +928,17 @@ static int be_set_vf_tx_rate(struct net_device *netdev,
 	return status;
 }
 
-static void be_rx_rate_update(struct be_rx_obj *rxo)
+static void be_rx_eqd_update(struct be_adapter *adapter, struct be_rx_obj *rxo)
 {
-	struct be_rx_stats *stats = &rxo->stats;
+	struct be_eq_obj *rx_eq = &rxo->rx_eq;
+	struct be_rx_stats *stats = rx_stats(rxo);
 	ulong now = jiffies;
+	ulong delta = now - stats->rx_jiffies;
+	u64 pkts;
+	unsigned int start, eqd;
+
+	if (!rx_eq->enable_aic)
+		return;
 
 	/* Wrapped around */
 	if (time_before(now, stats->rx_jiffies)) {
@@ -1016,29 +946,46 @@ static void be_rx_rate_update(struct be_rx_obj *rxo)
 		return;
 	}
 
-	/* Update the rate once in two seconds */
-	if ((now - stats->rx_jiffies) < 2 * HZ)
+	/* Update once a second */
+	if (delta < HZ)
 		return;
 
-	stats->rx_rate = be_calc_rate(stats->rx_bytes - stats->rx_bytes_prev,
-				now - stats->rx_jiffies);
+	do {
+		start = u64_stats_fetch_begin_bh(&stats->sync);
+		pkts = stats->rx_pkts;
+	} while (u64_stats_fetch_retry_bh(&stats->sync, start));
+
+	stats->rx_pps = (unsigned long)(pkts - stats->rx_pkts_prev) / (delta / HZ);
+	stats->rx_pkts_prev = pkts;
 	stats->rx_jiffies = now;
-	stats->rx_bytes_prev = stats->rx_bytes;
+	eqd = stats->rx_pps / 110000;
+	eqd = eqd << 3;
+	if (eqd > rx_eq->max_eqd)
+		eqd = rx_eq->max_eqd;
+	if (eqd < rx_eq->min_eqd)
+		eqd = rx_eq->min_eqd;
+	if (eqd < 10)
+		eqd = 0;
+	if (eqd != rx_eq->cur_eqd) {
+		be_cmd_modify_eqd(adapter, rx_eq->q.id, eqd);
+		rx_eq->cur_eqd = eqd;
+	}
 }
 
 static void be_rx_stats_update(struct be_rx_obj *rxo,
 		struct be_rx_compl_info *rxcp)
 {
-	struct be_rx_stats *stats = &rxo->stats;
+	struct be_rx_stats *stats = rx_stats(rxo);
 
+	u64_stats_update_begin(&stats->sync);
 	stats->rx_compl++;
-	stats->rx_frags += rxcp->num_rcvd;
 	stats->rx_bytes += rxcp->pkt_size;
 	stats->rx_pkts++;
 	if (rxcp->pkt_type == BE_MULTICAST_PACKET)
 		stats->rx_mcast_pkts++;
 	if (rxcp->err)
-		stats->rxcp_err++;
+		stats->rx_compl_err++;
+	u64_stats_update_end(&stats->sync);
 }
 
 static inline bool csum_passed(struct be_rx_compl_info *rxcp)
@@ -1174,7 +1121,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 
 	skb = netdev_alloc_skb_ip_align(netdev, BE_HDR_LEN);
 	if (unlikely(!skb)) {
-		rxo->stats.rx_dropped++;
+		rx_stats(rxo)->rx_drops_no_skbs++;
 		be_rx_compl_discard(adapter, rxo, rxcp);
 		return;
 	}
@@ -1192,7 +1139,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 		skb->rxhash = rxcp->rss_hash;
 
 
-	if (unlikely(rxcp->vlanf))
+	if (rxcp->vlanf)
 		__vlan_hwaccel_put_tag(skb, rxcp->vlan_tag);
 
 	netif_receive_skb(skb);
@@ -1249,7 +1196,7 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 	if (adapter->netdev->features & NETIF_F_RXHASH)
 		skb->rxhash = rxcp->rss_hash;
 
-	if (unlikely(rxcp->vlanf))
+	if (rxcp->vlanf)
 		__vlan_hwaccel_put_tag(skb, rxcp->vlan_tag);
 
 	napi_gro_frags(&eq_obj->napi);
@@ -1285,6 +1232,7 @@ static void be_parse_rx_compl_v1(struct be_adapter *adapter,
 		rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vlan_tag,
 					       compl);
 	}
+	rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, port, compl);
 }
 
 static void be_parse_rx_compl_v0(struct be_adapter *adapter,
@@ -1317,6 +1265,7 @@ static void be_parse_rx_compl_v0(struct be_adapter *adapter,
 		rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vlan_tag,
 					       compl);
 	}
+	rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, port, compl);
 }
 
 static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
@@ -1347,8 +1296,7 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
 		if (!lancer_chip(adapter))
 			rxcp->vlan_tag = swab16(rxcp->vlan_tag);
 
-		if (((adapter->pvid & VLAN_VID_MASK) ==
-		     (rxcp->vlan_tag & VLAN_VID_MASK)) &&
+		if (adapter->pvid == (rxcp->vlan_tag & VLAN_VID_MASK) &&
 		    !adapter->vlan_tag[rxcp->vlan_tag])
 			rxcp->vlanf = 0;
 	}
@@ -1389,7 +1337,7 @@ static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp)
 		if (!pagep) {
 			pagep = be_alloc_pages(adapter->big_page_size, gfp);
 			if (unlikely(!pagep)) {
-				rxo->stats.rx_post_fail++;
+				rx_stats(rxo)->rx_post_fail++;
 				break;
 			}
 			page_dmaaddr = dma_map_page(&adapter->pdev->dev, pagep,
@@ -1899,27 +1847,41 @@ static int be_poll_rx(struct napi_struct *napi, int budget)
 	struct be_rx_compl_info *rxcp;
 	u32 work_done;
 
-	rxo->stats.rx_polls++;
+	rx_stats(rxo)->rx_polls++;
 	for (work_done = 0; work_done < budget; work_done++) {
 		rxcp = be_rx_compl_get(rxo);
 		if (!rxcp)
 			break;
 
-		/* Ignore flush completions */
-		if (rxcp->num_rcvd && rxcp->pkt_size) {
-			if (do_gro(rxcp))
-				be_rx_compl_process_gro(adapter, rxo, rxcp);
-			else
-				be_rx_compl_process(adapter, rxo, rxcp);
-		} else if (rxcp->pkt_size == 0) {
+		/* Is it a flush compl that has no data */
+		if (unlikely(rxcp->num_rcvd == 0))
+			goto loop_continue;
+
+		/* Discard compl with partial DMA Lancer B0 */
+		if (unlikely(!rxcp->pkt_size)) {
+			be_rx_compl_discard(adapter, rxo, rxcp);
+			goto loop_continue;
+		}
+
+		/* On BE drop pkts that arrive due to imperfect filtering in
+		 * promiscuous mode on some skews
+		 */
+		if (unlikely(rxcp->port != adapter->port_num &&
+				!lancer_chip(adapter))) {
 			be_rx_compl_discard(adapter, rxo, rxcp);
+			goto loop_continue;
 		}
 
+		if (do_gro(rxcp))
+			be_rx_compl_process_gro(adapter, rxo, rxcp);
+		else
+			be_rx_compl_process(adapter, rxo, rxcp);
+loop_continue:
 		be_rx_stats_update(rxo, rxcp);
 	}
 
 	/* Refill the queue */
-	if (atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM)
+	if (work_done && atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM)
 		be_post_rx_frags(rxo, GFP_ATOMIC);
 
 	/* All consumed */
@@ -1968,8 +1930,9 @@ static int be_poll_tx_mcc(struct napi_struct *napi, int budget)
 				netif_wake_subqueue(adapter->netdev, i);
 			}
 
-			adapter->drv_stats.be_tx_events++;
-			txo->stats.be_tx_compl += tx_compl;
+			u64_stats_update_begin(&tx_stats(txo)->sync_compl);
+			tx_stats(txo)->tx_compl += tx_compl;
+			u64_stats_update_end(&tx_stats(txo)->sync_compl);
 		}
 	}
 
@@ -1983,6 +1946,7 @@ static int be_poll_tx_mcc(struct napi_struct *napi, int budget)
 	napi_complete(napi);
 
 	be_eq_notify(adapter, tx_eq->q.id, true, false, 0);
+	adapter->drv_stats.tx_events++;
 	return 1;
 }
 
@@ -2031,7 +1995,6 @@ static void be_worker(struct work_struct *work)
 	struct be_adapter *adapter =
 		container_of(work, struct be_adapter, work.work);
 	struct be_rx_obj *rxo;
-	struct be_tx_obj *txo;
 	int i;
 
 	if (!adapter->ue_detected && !lancer_chip(adapter))
@@ -2060,11 +2023,7 @@ static void be_worker(struct work_struct *work)
 			be_cmd_get_stats(adapter, &adapter->stats_cmd);
 	}
 
-	for_all_tx_queues(adapter, txo, i)
-		be_tx_rate_update(txo);
-
 	for_all_rx_queues(adapter, rxo, i) {
-		be_rx_rate_update(rxo);
 		be_rx_eqd_update(adapter, rxo);
 
 		if (rxo->rx_post_starved) {
@@ -2294,9 +2253,6 @@ static int be_close(struct net_device *netdev)
 
 	be_async_mcc_disable(adapter);
 
-	netif_carrier_off(netdev);
-	adapter->link_up = false;
-
 	if (!lancer_chip(adapter))
 		be_intr_set(adapter, false);
 
@@ -2374,10 +2330,7 @@ static int be_open(struct net_device *netdev)
 	struct be_adapter *adapter = netdev_priv(netdev);
 	struct be_eq_obj *tx_eq = &adapter->tx_eq;
 	struct be_rx_obj *rxo;
-	bool link_up;
 	int status, i;
-	u8 mac_speed;
-	u16 link_speed;
 
 	status = be_rx_queues_setup(adapter);
 	if (status)
@@ -2400,12 +2353,6 @@ static int be_open(struct net_device *netdev)
 	/* Now that interrupts are on we can process async mcc */
 	be_async_mcc_enable(adapter);
 
-	status = be_cmd_link_status_query(adapter, &link_up, &mac_speed,
-			&link_speed, 0);
-	if (status)
-		goto err;
-	be_link_status_update(adapter, link_up);
-
 	if (be_physfn(adapter)) {
 		status = be_vid_config(adapter, false, 0);
 		if (status)
@@ -2656,6 +2603,21 @@ static bool be_flash_redboot(struct be_adapter *adapter,
 		return true;
 }
 
+static bool phy_flashing_required(struct be_adapter *adapter)
+{
+	int status = 0;
+	struct be_phy_info phy_info;
+
+	status = be_cmd_get_phy_info(adapter, &phy_info);
+	if (status)
+		return false;
+	if ((phy_info.phy_type == TN_8022) &&
+		(phy_info.interface_type == PHY_TYPE_BASET_10GB)) {
+		return true;
+	}
+	return false;
+}
+
 static int be_flash_data(struct be_adapter *adapter,
 			const struct firmware *fw,
 			struct be_dma_mem *flash_cmd, int num_of_images)
@@ -2669,7 +2631,7 @@ static int be_flash_data(struct be_adapter *adapter,
 	const struct flash_comp *pflashcomp;
 	int num_comp;
 
-	static const struct flash_comp gen3_flash_types[9] = {
+	static const struct flash_comp gen3_flash_types[10] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
@@ -2687,7 +2649,9 @@ static int be_flash_data(struct be_adapter *adapter,
 		{ FLASH_FCoE_BACKUP_IMAGE_START_g3, IMG_TYPE_FCOE_FW_BACKUP,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_NCSI_START_g3, IMG_TYPE_NCSI_FW,
-			FLASH_NCSI_IMAGE_MAX_SIZE_g3}
+			FLASH_NCSI_IMAGE_MAX_SIZE_g3},
+		{ FLASH_PHY_FW_START_g3, IMG_TYPE_PHY_FW,
+			FLASH_PHY_FW_IMAGE_MAX_SIZE_g3}
 	};
 	static const struct flash_comp gen2_flash_types[8] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
@@ -2721,6 +2685,10 @@ static int be_flash_data(struct be_adapter *adapter,
 		if ((pflashcomp[i].optype == IMG_TYPE_NCSI_FW) &&
 				memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0)
 			continue;
+		if (pflashcomp[i].optype == IMG_TYPE_PHY_FW) {
+			if (!phy_flashing_required(adapter))
+				continue;
+		}
 		if ((pflashcomp[i].optype == IMG_TYPE_REDBOOT) &&
 			(!be_flash_redboot(adapter, fw->data,
 			pflashcomp[i].offset, pflashcomp[i].size, filehdr_size +
@@ -2729,25 +2697,35 @@ static int be_flash_data(struct be_adapter *adapter,
 		p = fw->data;
 		p += filehdr_size + pflashcomp[i].offset
 			+ (num_of_images * sizeof(struct image_hdr));
-	if (p + pflashcomp[i].size > fw->data + fw->size)
-		return -1;
-	total_bytes = pflashcomp[i].size;
+		if (p + pflashcomp[i].size > fw->data + fw->size)
+			return -1;
+		total_bytes = pflashcomp[i].size;
 		while (total_bytes) {
 			if (total_bytes > 32*1024)
 				num_bytes = 32*1024;
 			else
 				num_bytes = total_bytes;
 			total_bytes -= num_bytes;
-
-			if (!total_bytes)
-				flash_op = FLASHROM_OPER_FLASH;
-			else
-				flash_op = FLASHROM_OPER_SAVE;
+			if (!total_bytes) {
+				if (pflashcomp[i].optype == IMG_TYPE_PHY_FW)
+					flash_op = FLASHROM_OPER_PHY_FLASH;
+				else
+					flash_op = FLASHROM_OPER_FLASH;
+			} else {
+				if (pflashcomp[i].optype == IMG_TYPE_PHY_FW)
+					flash_op = FLASHROM_OPER_PHY_SAVE;
+				else
+					flash_op = FLASHROM_OPER_SAVE;
+			}
 			memcpy(req->params.data_buf, p, num_bytes);
 			p += num_bytes;
 			status = be_cmd_write_flashrom(adapter, flash_cmd,
 				pflashcomp[i].optype, flash_op, num_bytes);
 			if (status) {
+				if ((status == ILLEGAL_IOCTL_REQ) &&
+					(pflashcomp[i].optype ==
+						IMG_TYPE_PHY_FW))
+					break;
 				dev_err(&adapter->pdev->dev,
 					"cmd to write to flash rom failed.\n");
 				return -1;
@@ -2938,6 +2916,7 @@ static struct net_device_ops be_netdev_ops = {
 	.ndo_set_rx_mode	= be_set_multicast_list,
 	.ndo_set_mac_address	= be_mac_addr_set,
 	.ndo_change_mtu		= be_change_mtu,
+	.ndo_get_stats64	= be_get_stats64,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_vlan_rx_add_vid	= be_vlan_add_vid,
 	.ndo_vlan_rx_kill_vid	= be_vlan_rem_vid,
@@ -2991,14 +2970,12 @@ static void be_unmap_pci_bars(struct be_adapter *adapter)
 		iounmap(adapter->csr);
 	if (adapter->db)
 		iounmap(adapter->db);
-	if (adapter->pcicfg && be_physfn(adapter))
-		iounmap(adapter->pcicfg);
 }
 
 static int be_map_pci_bars(struct be_adapter *adapter)
 {
 	u8 __iomem *addr;
-	int pcicfg_reg, db_reg;
+	int db_reg;
 
 	if (lancer_chip(adapter)) {
 		addr = ioremap_nocache(pci_resource_start(adapter->pdev, 0),
@@ -3018,10 +2995,8 @@ static int be_map_pci_bars(struct be_adapter *adapter)
 	}
 
 	if (adapter->generation == BE_GEN2) {
-		pcicfg_reg = 1;
 		db_reg = 4;
 	} else {
-		pcicfg_reg = 0;
 		if (be_physfn(adapter))
 			db_reg = 4;
 		else
@@ -3033,16 +3008,6 @@ static int be_map_pci_bars(struct be_adapter *adapter)
 		goto pci_map_err;
 	adapter->db = addr;
 
-	if (be_physfn(adapter)) {
-		addr = ioremap_nocache(
-				pci_resource_start(adapter->pdev, pcicfg_reg),
-				pci_resource_len(adapter->pdev, pcicfg_reg));
-		if (addr == NULL)
-			goto pci_map_err;
-		adapter->pcicfg = addr;
-	} else
-		adapter->pcicfg = adapter->db + SRIOV_VF_PCICFG_OFFSET;
-
 	return 0;
 pci_map_err:
 	be_unmap_pci_bars(adapter);
@@ -3060,7 +3025,7 @@ static void be_ctrl_cleanup(struct be_adapter *adapter)
 		dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va,
 				  mem->dma);
 
-	mem = &adapter->mc_cmd_mem;
+	mem = &adapter->rx_filter;
 	if (mem->va)
 		dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va,
 				  mem->dma);
@@ -3070,7 +3035,7 @@ static int be_ctrl_init(struct be_adapter *adapter)
 {
 	struct be_dma_mem *mbox_mem_alloc = &adapter->mbox_mem_alloced;
 	struct be_dma_mem *mbox_mem_align = &adapter->mbox_mem;
-	struct be_dma_mem *mc_cmd_mem = &adapter->mc_cmd_mem;
+	struct be_dma_mem *rx_filter = &adapter->rx_filter;
 	int status;
 
 	status = be_map_pci_bars(adapter);
@@ -3086,21 +3051,19 @@ static int be_ctrl_init(struct be_adapter *adapter)
 		status = -ENOMEM;
 		goto unmap_pci_bars;
 	}
-
 	mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
 	mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
 	mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
 	memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
 
-	mc_cmd_mem->size = sizeof(struct be_cmd_req_mcast_mac_config);
-	mc_cmd_mem->va = dma_alloc_coherent(&adapter->pdev->dev,
-					    mc_cmd_mem->size, &mc_cmd_mem->dma,
-					    GFP_KERNEL);
-	if (mc_cmd_mem->va == NULL) {
+	rx_filter->size = sizeof(struct be_cmd_req_rx_filter);
+	rx_filter->va = dma_alloc_coherent(&adapter->pdev->dev, rx_filter->size,
+					&rx_filter->dma, GFP_KERNEL);
+	if (rx_filter->va == NULL) {
 		status = -ENOMEM;
 		goto free_mbox;
 	}
-	memset(mc_cmd_mem->va, 0, mc_cmd_mem->size);
+	memset(rx_filter->va, 0, rx_filter->size);
 
 	mutex_init(&adapter->mbox_lock);
 	spin_lock_init(&adapter->mcc_lock);
@@ -3421,11 +3384,9 @@ static int __devinit be_probe(struct pci_dev *pdev,
 	status = register_netdev(netdev);
 	if (status != 0)
 		goto unsetup;
-	netif_carrier_off(netdev);
 
 	if (be_physfn(adapter) && adapter->sriov_enabled) {
 		u8 mac_speed;
-		bool link_up;
 		u16 vf, lnk_speed;
 
 		if (!lancer_chip(adapter)) {
@@ -3435,8 +3396,8 @@ static int __devinit be_probe(struct pci_dev *pdev,
 		}
 
 		for (vf = 0; vf < num_vfs; vf++) {
-			status = be_cmd_link_status_query(adapter, &link_up,
-					&mac_speed, &lnk_speed, vf + 1);
+			status = be_cmd_link_status_query(adapter, &mac_speed,
+						&lnk_speed, vf + 1);
 			if (!status)
 				adapter->vf_cfg[vf].vf_tx_rate = lnk_speed * 10;
 			else
diff --git a/drivers/net/ethoc.c b/drivers/net/ethernet/ethoc.c
index 8abbe1d82826..bdb348a5ccf6 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -888,7 +888,7 @@ static const struct net_device_ops ethoc_netdev_ops = {
 	.ndo_do_ioctl = ethoc_ioctl,
 	.ndo_set_config = ethoc_config,
 	.ndo_set_mac_address = ethoc_set_mac_address,
-	.ndo_set_multicast_list = ethoc_set_multicast_list,
+	.ndo_set_rx_mode = ethoc_set_multicast_list,
 	.ndo_change_mtu = ethoc_change_mtu,
 	.ndo_tx_timeout = ethoc_tx_timeout,
 	.ndo_start_xmit = ethoc_start_xmit,
diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
new file mode 100644
index 000000000000..5918c6891694
--- /dev/null
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -0,0 +1,39 @@
+#
+# Faraday device configuration
+#
+
+config NET_VENDOR_FARADAY
+	bool "Faraday devices"
+	default y
+	depends on ARM
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Faraday cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_FARADAY
+
+config FTMAC100
+	tristate "Faraday FTMAC100 10/100 Ethernet support"
+	depends on ARM
+	select MII
+	---help---
+	  This driver supports the FTMAC100 10/100 Ethernet controller
+	  from Faraday. It is used on Faraday A320, Andes AG101 and some
+	  other ARM/NDS32 SoC's.
+
+config FTGMAC100
+	tristate "Faraday FTGMAC100 Gigabit Ethernet support"
+	depends on ARM
+	select PHYLIB
+	---help---
+	  This driver supports the FTGMAC100 Gigabit Ethernet controller
+	  from Faraday. It is used on Faraday A369, Andes AG102 and some
+	  other ARM/NDS32 SoC's.
+
+endif # NET_VENDOR_FARADAY
diff --git a/drivers/net/ethernet/faraday/Makefile b/drivers/net/ethernet/faraday/Makefile
new file mode 100644
index 000000000000..408b53980d53
--- /dev/null
+++ b/drivers/net/ethernet/faraday/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Faraday device drivers.
+#
+
+obj-$(CONFIG_FTGMAC100) += ftgmac100.o
+obj-$(CONFIG_FTMAC100) += ftmac100.o
diff --git a/drivers/net/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 54709af917e9..54709af917e9 100644
--- a/drivers/net/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
diff --git a/drivers/net/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
index 13408d448b05..13408d448b05 100644
--- a/drivers/net/ftgmac100.h
+++ b/drivers/net/ethernet/faraday/ftgmac100.h
diff --git a/drivers/net/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c
index 9bd7746cbfcf..9bd7746cbfcf 100644
--- a/drivers/net/ftmac100.c
+++ b/drivers/net/ethernet/faraday/ftmac100.c
diff --git a/drivers/net/ftmac100.h b/drivers/net/ethernet/faraday/ftmac100.h
index 46a0c47b1ee1..46a0c47b1ee1 100644
--- a/drivers/net/ftmac100.h
+++ b/drivers/net/ethernet/faraday/ftmac100.h
diff --git a/drivers/net/fealnx.c b/drivers/net/ethernet/fealnx.c
index fa8677c32384..61d2bddec1fa 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/ethernet/fealnx.c
@@ -469,7 +469,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_stop		= netdev_close,
 	.ndo_start_xmit		= start_tx,
 	.ndo_get_stats 		= get_stats,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_do_ioctl		= mii_ioctl,
 	.ndo_tx_timeout		= fealnx_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
new file mode 100644
index 000000000000..4dbe41f1cbc6
--- /dev/null
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -0,0 +1,89 @@
+#
+# Freescale device configuration
+#
+
+config NET_VENDOR_FREESCALE
+	bool "Freescale devices"
+	default y
+	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
+		   M523x || M527x || M5272 || M528x || M520x || M532x || \
+		   IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC || \
+		   (PPC_MPC52xx && PPC_BESTCOMM)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about IBM devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_FREESCALE
+
+config FEC
+	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
+	depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
+		    IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC)
+	default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM
+	select PHYLIB
+	---help---
+	  Say Y here if you want to use the built-in 10/100 Fast ethernet
+	  controller on some Motorola ColdFire and Freescale i.MX processors.
+
+config FEC_MPC52xx
+	tristate "FEC MPC52xx driver"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select CRC32
+	select PHYLIB
+	select PPC_BESTCOMM_FEC
+	---help---
+	  This option enables support for the MPC5200's on-chip
+	  Fast Ethernet Controller
+	  If compiled as module, it will be called fec_mpc52xx.
+
+config FEC_MPC52xx_MDIO
+	bool "FEC MPC52xx MDIO bus driver"
+	depends on FEC_MPC52xx
+	default y
+	---help---
+	  The MPC5200's FEC can connect to the Ethernet either with
+	  an external MII PHY chip or 10 Mbps 7-wire interface
+	  (Motorola? industry standard).
+	  If your board uses an external PHY connected to FEC, enable this.
+	  If not sure, enable.
+	  If compiled as module, it will be called fec_mpc52xx_phy.
+
+source "drivers/net/ethernet/freescale/fs_enet/Kconfig"
+
+config FSL_PQ_MDIO
+	tristate "Freescale PQ MDIO"
+	depends on FSL_SOC
+	select PHYLIB
+	---help---
+	  This driver supports the MDIO bus used by the gianfar and UCC drivers.
+
+config UCC_GETH
+	tristate "Freescale QE Gigabit Ethernet"
+	depends on QUICC_ENGINE
+	select FSL_PQ_MDIO
+	select PHYLIB
+	---help---
+	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
+	  which is available on some Freescale SOCs.
+
+config UGETH_TX_ON_DEMAND
+	bool "Transmit on Demand support"
+	depends on UCC_GETH
+
+config GIANFAR
+	tristate "Gianfar Ethernet"
+	depends on FSL_SOC
+	select FSL_PQ_MDIO
+	select PHYLIB
+	select CRC32
+	---help---
+	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
+	  and MPC86xx family of chips, and the FEC on the 8540.
+
+endif # NET_VENDOR_FREESCALE
diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
new file mode 100644
index 000000000000..1752488c9ee5
--- /dev/null
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for the Freescale network device drivers.
+#
+
+obj-$(CONFIG_FEC) += fec.o
+obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
+ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
+	obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
+endif
+obj-$(CONFIG_FS_ENET) += fs_enet/
+obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
+obj-$(CONFIG_GIANFAR) += gianfar_driver.o
+obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
+gianfar_driver-objs := gianfar.o \
+		gianfar_ethtool.o \
+		gianfar_sysfs.o
+obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
+ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
diff --git a/drivers/net/fec.c b/drivers/net/ethernet/freescale/fec.c
index 5b631fe74738..158b82ea6df5 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -44,6 +44,10 @@
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/fec.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_net.h>
 
 #include <asm/cacheflush.h>
 
@@ -66,17 +70,42 @@
 #define FEC_QUIRK_ENET_MAC		(1 << 0)
 /* Controller needs driver to swap frame */
 #define FEC_QUIRK_SWAP_FRAME		(1 << 1)
+/* Controller uses gasket */
+#define FEC_QUIRK_USE_GASKET		(1 << 2)
 
 static struct platform_device_id fec_devtype[] = {
 	{
+		/* keep it for coldfire */
 		.name = DRIVER_NAME,
 		.driver_data = 0,
 	}, {
+		.name = "imx25-fec",
+		.driver_data = FEC_QUIRK_USE_GASKET,
+	}, {
+		.name = "imx27-fec",
+		.driver_data = 0,
+	}, {
 		.name = "imx28-fec",
 		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
-	},
-	{ }
+	}, {
+		/* sentinel */
+	}
 };
+MODULE_DEVICE_TABLE(platform, fec_devtype);
+
+enum imx_fec_type {
+	IMX25_FEC = 1, 	/* runs on i.mx25/50/53 */
+	IMX27_FEC,	/* runs on i.mx27/35/51 */
+	IMX28_FEC,
+};
+
+static const struct of_device_id fec_dt_ids[] = {
+	{ .compatible = "fsl,imx25-fec", .data = &fec_devtype[IMX25_FEC], },
+	{ .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], },
+	{ .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fec_dt_ids);
 
 static unsigned char macaddr[ETH_ALEN];
 module_param_array(macaddr, byte, NULL, 0);
@@ -427,7 +456,7 @@ fec_restart(struct net_device *ndev, int duplex)
 
 	} else {
 #ifdef FEC_MIIGSK_ENR
-		if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
+		if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) {
 			/* disable the gasket and wait */
 			writel(0, fep->hwp + FEC_MIIGSK_ENR);
 			while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
@@ -436,8 +465,11 @@ fec_restart(struct net_device *ndev, int duplex)
 			/*
 			 * configure the gasket:
 			 *   RMII, 50 MHz, no loopback, no echo
+			 *   MII, 25 MHz, no loopback, no echo
 			 */
-			writel(1, fep->hwp + FEC_MIIGSK_CFGR);
+			writel((fep->phy_interface == PHY_INTERFACE_MODE_RMII) ?
+					1 : 0, fep->hwp + FEC_MIIGSK_CFGR);
+
 
 			/* re-enable the gasket */
 			writel(2, fep->hwp + FEC_MIIGSK_ENR);
@@ -734,8 +766,22 @@ static void __inline__ fec_get_mac(struct net_device *ndev)
 	 */
 	iap = macaddr;
 
+#ifdef CONFIG_OF
 	/*
-	 * 2) from flash or fuse (via platform data)
+	 * 2) from device tree data
+	 */
+	if (!is_valid_ether_addr(iap)) {
+		struct device_node *np = fep->pdev->dev.of_node;
+		if (np) {
+			const char *mac = of_get_mac_address(np);
+			if (mac)
+				iap = (unsigned char *) mac;
+		}
+	}
+#endif
+
+	/*
+	 * 3) from flash or fuse (via platform data)
 	 */
 	if (!is_valid_ether_addr(iap)) {
 #ifdef CONFIG_M5272
@@ -748,7 +794,7 @@ static void __inline__ fec_get_mac(struct net_device *ndev)
 	}
 
 	/*
-	 * 3) FEC mac registers set by bootloader
+	 * 4) FEC mac registers set by bootloader
 	 */
 	if (!is_valid_ether_addr(iap)) {
 		*((unsigned long *) &tmpaddr[0]) =
@@ -1279,7 +1325,7 @@ static const struct net_device_ops fec_netdev_ops = {
 	.ndo_open		= fec_enet_open,
 	.ndo_stop		= fec_enet_close,
 	.ndo_start_xmit		= fec_enet_start_xmit,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_tx_timeout		= fec_timeout,
@@ -1354,6 +1400,52 @@ static int fec_enet_init(struct net_device *ndev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static int __devinit fec_get_phy_mode_dt(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+
+	if (np)
+		return of_get_phy_mode(np);
+
+	return -ENODEV;
+}
+
+static int __devinit fec_reset_phy(struct platform_device *pdev)
+{
+	int err, phy_reset;
+	struct device_node *np = pdev->dev.of_node;
+
+	if (!np)
+		return -ENODEV;
+
+	phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
+	err = gpio_request_one(phy_reset, GPIOF_OUT_INIT_LOW, "phy-reset");
+	if (err) {
+		pr_warn("FEC: failed to get gpio phy-reset: %d\n", err);
+		return err;
+	}
+	msleep(1);
+	gpio_set_value(phy_reset, 1);
+
+	return 0;
+}
+#else /* CONFIG_OF */
+static inline int fec_get_phy_mode_dt(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+
+static inline int fec_reset_phy(struct platform_device *pdev)
+{
+	/*
+	 * In case of platform probe, the reset has been done
+	 * by machine code.
+	 */
+	return 0;
+}
+#endif /* CONFIG_OF */
+
 static int __devinit
 fec_probe(struct platform_device *pdev)
 {
@@ -1362,6 +1454,11 @@ fec_probe(struct platform_device *pdev)
 	struct net_device *ndev;
 	int i, irq, ret = 0;
 	struct resource *r;
+	const struct of_device_id *of_id;
+
+	of_id = of_match_device(fec_dt_ids, &pdev->dev);
+	if (of_id)
+		pdev->id_entry = of_id->data;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!r)
@@ -1393,9 +1490,18 @@ fec_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ndev);
 
-	pdata = pdev->dev.platform_data;
-	if (pdata)
-		fep->phy_interface = pdata->phy;
+	ret = fec_get_phy_mode_dt(pdev);
+	if (ret < 0) {
+		pdata = pdev->dev.platform_data;
+		if (pdata)
+			fep->phy_interface = pdata->phy;
+		else
+			fep->phy_interface = PHY_INTERFACE_MODE_MII;
+	} else {
+		fep->phy_interface = ret;
+	}
+
+	fec_reset_phy(pdev);
 
 	/* This device has up to three irqs on some platforms */
 	for (i = 0; i < 3; i++) {
@@ -1530,6 +1636,7 @@ static struct platform_driver fec_driver = {
 #ifdef CONFIG_PM
 		.pm	= &fec_pm_ops,
 #endif
+		.of_match_table = fec_dt_ids,
 	},
 	.id_table = fec_devtype,
 	.probe	= fec_probe,
diff --git a/drivers/net/fec.h b/drivers/net/ethernet/freescale/fec.h
index 8b2c6d797e6d..8b2c6d797e6d 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c
index cb4416e591f1..30745b56fe5d 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
@@ -828,7 +828,7 @@ static const struct net_device_ops mpc52xx_fec_netdev_ops = {
 	.ndo_open = mpc52xx_fec_open,
 	.ndo_stop = mpc52xx_fec_close,
 	.ndo_start_xmit = mpc52xx_fec_start_xmit,
-	.ndo_set_multicast_list = mpc52xx_fec_set_multicast_list,
+	.ndo_set_rx_mode = mpc52xx_fec_set_multicast_list,
 	.ndo_set_mac_address = mpc52xx_fec_set_mac_address,
 	.ndo_validate_addr = eth_validate_addr,
 	.ndo_do_ioctl = mpc52xx_fec_ioctl,
diff --git a/drivers/net/fec_mpc52xx.h b/drivers/net/ethernet/freescale/fec_mpc52xx.h
index 41d2dffde55b..41d2dffde55b 100644
--- a/drivers/net/fec_mpc52xx.h
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.h
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/ethernet/freescale/fec_mpc52xx_phy.c
index 360a578c2bb7..360a578c2bb7 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx_phy.c
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/ethernet/freescale/fs_enet/Kconfig
index fc073b5a38c7..be92229f2c2a 100644
--- a/drivers/net/fs_enet/Kconfig
+++ b/drivers/net/ethernet/freescale/fs_enet/Kconfig
@@ -1,6 +1,6 @@
 config FS_ENET
        tristate "Freescale Ethernet Driver"
-       depends on CPM1 || CPM2 || PPC_MPC512x
+       depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
        select MII
        select PHYLIB
 
diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/ethernet/freescale/fs_enet/Makefile
index d4a305ee3455..d4a305ee3455 100644
--- a/drivers/net/fs_enet/Makefile
+++ b/drivers/net/ethernet/freescale/fs_enet/Makefile
diff --git a/drivers/net/fs_enet/fec.h b/drivers/net/ethernet/freescale/fs_enet/fec.h
index e980527e2b99..e980527e2b99 100644
--- a/drivers/net/fs_enet/fec.h
+++ b/drivers/net/ethernet/freescale/fs_enet/fec.h
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
index 329ef231a096..5bf5471f06ff 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
@@ -988,7 +988,7 @@ static const struct net_device_ops fs_enet_netdev_ops = {
 	.ndo_get_stats		= fs_enet_get_stats,
 	.ndo_start_xmit		= fs_enet_start_xmit,
 	.ndo_tx_timeout		= fs_timeout,
-	.ndo_set_multicast_list	= fs_set_multicast_list,
+	.ndo_set_rx_mode	= fs_set_multicast_list,
 	.ndo_do_ioctl		= fs_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/ethernet/freescale/fs_enet/fs_enet.h
index 1ece4b1a689e..1ece4b1a689e 100644
--- a/drivers/net/fs_enet/fs_enet.h
+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet.h
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
index 7583a9572bcc..7583a9572bcc 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
index b9fbc83d64a7..b9fbc83d64a7 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
index 22a02a767069..22a02a767069 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c
index b09270b5d0a5..b09270b5d0a5 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
index e0e9d6c35d83..e0e9d6c35d83 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
index 52f4e8ad48e7..52f4e8ad48e7 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
diff --git a/drivers/net/fsl_pq_mdio.h b/drivers/net/ethernet/freescale/fsl_pq_mdio.h
index bd17a2a0139b..bd17a2a0139b 100644
--- a/drivers/net/fsl_pq_mdio.h
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.h
diff --git a/drivers/net/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 2659daad783d..81d409d08c97 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -458,7 +458,7 @@ static const struct net_device_ops gfar_netdev_ops = {
 	.ndo_stop = gfar_close,
 	.ndo_change_mtu = gfar_change_mtu,
 	.ndo_set_features = gfar_set_features,
-	.ndo_set_multicast_list = gfar_set_multi,
+	.ndo_set_rx_mode = gfar_set_multi,
 	.ndo_tx_timeout = gfar_timeout,
 	.ndo_do_ioctl = gfar_ioctl,
 	.ndo_get_stats = gfar_get_stats,
@@ -2710,8 +2710,13 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
 	/* Tell the skb what kind of packet this is */
 	skb->protocol = eth_type_trans(skb, dev);
 
-	/* Set vlan tag */
-	if (fcb->flags & RXFCB_VLN)
+	/*
+	 * There's need to check for NETIF_F_HW_VLAN_RX here.
+	 * Even if vlan rx accel is disabled, on some chips
+	 * RXFCB_VLN is pseudo randomly set.
+	 */
+	if (dev->features & NETIF_F_HW_VLAN_RX &&
+	    fcb->flags & RXFCB_VLN)
 		__vlan_hwaccel_put_tag(skb, fcb->vlctl);
 
 	/* Send the packet up the stack */
diff --git a/drivers/net/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 9aa43773e8e3..9aa43773e8e3 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 6e350692d118..25a8c2adb001 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -686,10 +686,21 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
 {
 	unsigned int last_rule_idx = priv->cur_filer_idx;
 	unsigned int cmp_rqfpr;
-	unsigned int local_rqfpr[MAX_FILER_IDX + 1];
-	unsigned int local_rqfcr[MAX_FILER_IDX + 1];
+	unsigned int *local_rqfpr;
+	unsigned int *local_rqfcr;
 	int i = 0x0, k = 0x0;
 	int j = MAX_FILER_IDX, l = 0x0;
+	int ret = 1;
+
+	local_rqfpr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1),
+		GFP_KERNEL);
+	local_rqfcr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1),
+		GFP_KERNEL);
+	if (!local_rqfpr || !local_rqfcr) {
+		pr_err("Out of memory\n");
+		ret = 0;
+		goto err;
+	}
 
 	switch (class) {
 	case TCP_V4_FLOW:
@@ -706,7 +717,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
 		break;
 	default:
 		pr_err("Right now this class is not supported\n");
-		return 0;
+		ret = 0;
+		goto err;
 	}
 
 	for (i = 0; i < MAX_FILER_IDX + 1; i++) {
@@ -721,7 +733,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
 
 	if (i == MAX_FILER_IDX + 1) {
 		pr_err("No parse rule found, can't create hash rules\n");
-		return 0;
+		ret = 0;
+		goto err;
 	}
 
 	/* If a match was found, then it begins the starting of a cluster rule
@@ -765,7 +778,10 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
 		priv->cur_filer_idx = priv->cur_filer_idx - 1;
 	}
 
-	return 1;
+err:
+	kfree(local_rqfcr);
+	kfree(local_rqfpr);
+	return ret;
 }
 
 static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd)
diff --git a/drivers/net/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
index 1c97861596f0..f67b8aebc89c 100644
--- a/drivers/net/gianfar_ptp.c
+++ b/drivers/net/ethernet/freescale/gianfar_ptp.c
@@ -193,14 +193,9 @@ static void set_alarm(struct etsects *etsects)
 /* Caller must hold etsects->lock. */
 static void set_fipers(struct etsects *etsects)
 {
-	u32 tmr_ctrl = gfar_read(&etsects->regs->tmr_ctrl);
-
-	gfar_write(&etsects->regs->tmr_ctrl,   tmr_ctrl & (~TE));
-	gfar_write(&etsects->regs->tmr_prsc,   etsects->tmr_prsc);
+	set_alarm(etsects);
 	gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
 	gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
-	set_alarm(etsects);
-	gfar_write(&etsects->regs->tmr_ctrl,   tmr_ctrl|TE);
 }
 
 /*
@@ -511,7 +506,7 @@ static int gianfar_ptp_probe(struct platform_device *dev)
 	gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
 	gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
 	set_alarm(etsects);
-	gfar_write(&etsects->regs->tmr_ctrl,   tmr_ctrl|FS|RTPE|TE);
+	gfar_write(&etsects->regs->tmr_ctrl,   tmr_ctrl|FS|RTPE|TE|FRD);
 
 	spin_unlock_irqrestore(&etsects->lock, flags);
 
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/ethernet/freescale/gianfar_sysfs.c
index 64f4094ac7f1..64f4094ac7f1 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/ethernet/freescale/gianfar_sysfs.c
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index d3465ab50e56..46d690a92c0b 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1761,10 +1761,12 @@ static int init_phy(struct net_device *dev)
 	if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
 		uec_configure_serdes(dev);
 
-	phydev->supported &= (ADVERTISED_10baseT_Half |
-				 ADVERTISED_10baseT_Full |
-				 ADVERTISED_100baseT_Half |
-				 ADVERTISED_100baseT_Full);
+	phydev->supported &= (SUPPORTED_MII |
+			      SUPPORTED_Autoneg |
+			      ADVERTISED_10baseT_Half |
+			      ADVERTISED_10baseT_Full |
+			      ADVERTISED_100baseT_Half |
+			      ADVERTISED_100baseT_Full);
 
 	if (priv->max_speed == SPEED_1000)
 		phydev->supported |= ADVERTISED_1000baseT_Full;
@@ -3729,7 +3731,7 @@ static const struct net_device_ops ucc_geth_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ucc_geth_set_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_multicast_list	= ucc_geth_set_multi,
+	.ndo_set_rx_mode	= ucc_geth_set_multi,
 	.ndo_tx_timeout		= ucc_geth_timeout,
 	.ndo_do_ioctl		= ucc_geth_ioctl,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index d12fcad145e9..d12fcad145e9 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
index a97257f91a3d..a97257f91a3d 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
new file mode 100644
index 000000000000..dffee9d44fd5
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -0,0 +1,54 @@
+#
+# Fujitsu Network device configuration
+#
+
+config NET_VENDOR_FUJITSU
+	bool "Fujitsu devices"
+	default y
+	depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  the questions about Fujitsu cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_FUJITSU
+
+config AT1700
+	tristate "AT1700/1720 support (EXPERIMENTAL)"
+	depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called at1700.
+
+config PCMCIA_FMVJ18X
+	tristate "Fujitsu FMV-J18x PCMCIA support"
+	depends on PCMCIA
+	select CRC32
+	---help---
+	  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+	  PCMCIA (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called fmvj18x_cs.  If unsure, say N.
+
+config ETH16I
+	tristate "ICL EtherTeam 16i/32 support"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eth16i.
+
+endif # NET_VENDOR_FUJITSU
diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile
new file mode 100644
index 000000000000..2730ae67d3aa
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Fujitsu network device drivers.
+#
+
+obj-$(CONFIG_AT1700) += at1700.o
+obj-$(CONFIG_ETH16I) += eth16i.o
+obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
diff --git a/drivers/net/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c
index 65a78f965dd2..7c6c908bdf02 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/ethernet/fujitsu/at1700.c
@@ -253,7 +253,7 @@ static const struct net_device_ops at1700_netdev_ops = {
 	.ndo_open		= net_open,
 	.ndo_stop		= net_close,
 	.ndo_start_xmit 	= net_send_packet,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_tx_timeout 	= net_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c
index 12d28e9d0cb7..b0e2313af3d1 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/ethernet/fujitsu/eth16i.c
@@ -478,7 +478,7 @@ static const struct net_device_ops eth16i_netdev_ops = {
 	.ndo_open               = eth16i_open,
 	.ndo_stop               = eth16i_close,
 	.ndo_start_xmit    	= eth16i_tx,
-	.ndo_set_multicast_list = eth16i_multicast,
+	.ndo_set_rx_mode	= eth16i_multicast,
 	.ndo_tx_timeout 	= eth16i_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
index 723815e7a997..15416752c13e 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -226,7 +226,7 @@ static const struct net_device_ops fjn_netdev_ops = {
 	.ndo_start_xmit 	= fjn_start_xmit,
 	.ndo_tx_timeout 	= fjn_tx_timeout,
 	.ndo_set_config 	= fjn_config,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ethernet/hp/Kconfig b/drivers/net/ethernet/hp/Kconfig
new file mode 100644
index 000000000000..a0b8ece1e3bc
--- /dev/null
+++ b/drivers/net/ethernet/hp/Kconfig
@@ -0,0 +1,32 @@
+#
+# HP network device configuration
+#
+
+config NET_VENDOR_HP
+	bool "HP devices"
+	default y
+	depends on ISA || EISA || PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about HP cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_HP
+
+config HP100
+	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
+	depends on (ISA || EISA || PCI)
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called hp100.
+
+endif # NET_VENDOR_HP
diff --git a/drivers/net/ethernet/hp/Makefile b/drivers/net/ethernet/hp/Makefile
new file mode 100644
index 000000000000..20b6918b52bd
--- /dev/null
+++ b/drivers/net/ethernet/hp/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the HP network device drivers.
+#
+
+obj-$(CONFIG_HP100) += hp100.o
diff --git a/drivers/net/hp100.c b/drivers/net/ethernet/hp/hp100.c
index b6519c1ba7e1..6a5ee0776b28 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/ethernet/hp/hp100.c
@@ -430,7 +430,7 @@ static const struct net_device_ops hp100_bm_netdev_ops = {
 	.ndo_stop		= hp100_close,
 	.ndo_start_xmit		= hp100_start_xmit_bm,
 	.ndo_get_stats 		= hp100_get_stats,
-	.ndo_set_multicast_list = hp100_set_multicast_list,
+	.ndo_set_rx_mode	= hp100_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -441,7 +441,7 @@ static const struct net_device_ops hp100_netdev_ops = {
 	.ndo_stop		= hp100_close,
 	.ndo_start_xmit		= hp100_start_xmit,
 	.ndo_get_stats 		= hp100_get_stats,
-	.ndo_set_multicast_list = hp100_set_multicast_list,
+	.ndo_set_rx_mode	= hp100_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/hp100.h b/drivers/net/ethernet/hp/hp100.h
index b60e96fe38b4..b60e96fe38b4 100644
--- a/drivers/net/hp100.h
+++ b/drivers/net/ethernet/hp/hp100.h
diff --git a/drivers/net/3c505.c b/drivers/net/ethernet/i825xx/3c505.c
index 88d766ee0e1b..40e1a175fceb 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/ethernet/i825xx/3c505.c
@@ -1363,7 +1363,7 @@ static const struct net_device_ops elp_netdev_ops = {
 	.ndo_get_stats 		= elp_get_stats,
 	.ndo_start_xmit		= elp_start_xmit,
 	.ndo_tx_timeout 	= elp_timeout,
-	.ndo_set_multicast_list = elp_set_mc_list,
+	.ndo_set_rx_mode	= elp_set_mc_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/3c505.h b/drivers/net/ethernet/i825xx/3c505.h
index 04df2a9002b6..04df2a9002b6 100644
--- a/drivers/net/3c505.h
+++ b/drivers/net/ethernet/i825xx/3c505.h
diff --git a/drivers/net/3c507.c b/drivers/net/ethernet/i825xx/3c507.c
index 1e945551c144..1e945551c144 100644
--- a/drivers/net/3c507.c
+++ b/drivers/net/ethernet/i825xx/3c507.c
diff --git a/drivers/net/3c523.c b/drivers/net/ethernet/i825xx/3c523.c
index bc0d1a1c2e28..d70d3df4c985 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/ethernet/i825xx/3c523.c
@@ -409,7 +409,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_start_xmit		= elmc_send_packet,
 	.ndo_tx_timeout		= elmc_timeout,
 #ifdef ELMC_MULTICAST
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 #endif
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/3c523.h b/drivers/net/ethernet/i825xx/3c523.h
index 6956441687b9..6956441687b9 100644
--- a/drivers/net/3c523.h
+++ b/drivers/net/ethernet/i825xx/3c523.h
diff --git a/drivers/net/3c527.c b/drivers/net/ethernet/i825xx/3c527.c
index d9d056d207f3..474b5e71a53a 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/ethernet/i825xx/3c527.c
@@ -292,7 +292,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_stop		= mc32_close,
 	.ndo_start_xmit		= mc32_send_packet,
 	.ndo_get_stats		= mc32_get_stats,
-	.ndo_set_multicast_list = mc32_set_multicast_list,
+	.ndo_set_rx_mode	= mc32_set_multicast_list,
 	.ndo_tx_timeout		= mc32_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/3c527.h b/drivers/net/ethernet/i825xx/3c527.h
index d693b8d15cde..d693b8d15cde 100644
--- a/drivers/net/3c527.h
+++ b/drivers/net/ethernet/i825xx/3c527.h
diff --git a/drivers/net/82596.c b/drivers/net/ethernet/i825xx/82596.c
index be1f1970c842..f2408a4d5d9c 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/ethernet/i825xx/82596.c
@@ -1145,7 +1145,7 @@ static const struct net_device_ops i596_netdev_ops = {
 	.ndo_open 		= i596_open,
 	.ndo_stop		= i596_close,
 	.ndo_start_xmit		= i596_start_xmit,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_tx_timeout		= i596_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
new file mode 100644
index 000000000000..2be46986cbe2
--- /dev/null
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -0,0 +1,183 @@
+#
+# Intel 82596/82593/82596 network device configuration
+#
+
+config NET_VENDOR_I825XX
+	bool "Intel (82586/82593/82596) devices"
+	default y
+	depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \
+		   ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
+		   GSC || BVME6000 || MVME16x || EXPERIMENTAL)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question does not directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about these devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_I825XX
+
+config ELPLUS
+	tristate "3c505 \"EtherLink Plus\" support"
+	depends on ISA && ISA_DMA_API
+	---help---
+	  Information about this network (Ethernet) card can be found in
+	  <file:Documentation/networking/3c505.txt>.  If you have a card of
+	  this type, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c505.
+
+config EL16
+	tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
+	depends on ISA && EXPERIMENTAL
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c507.
+
+config ELMC
+	tristate "3c523 \"EtherLink/MC\" support"
+	depends on MCA_LEGACY
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c523.
+
+config ELMC_II
+	tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
+	depends on MCA && MCA_LEGACY
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c527.
+
+config ARM_ETHER1
+	tristate "Acorn Ether1 support"
+	depends on ARM && ARCH_ACORN
+	---help---
+	  If you have an Acorn system with one of these (AKA25) network cards,
+	  you should say Y to this option if you wish to use it with Linux.
+
+config APRICOT
+	tristate "Apricot Xen-II on board Ethernet"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called apricot.
+
+config BVME6000_NET
+	tristate "BVME6000 Ethernet support"
+	depends on BVME6000MVME16x
+	---help---
+	  This is the driver for the Ethernet interface on BVME4000 and
+	  BVME6000 VME boards.  Say Y here to include the driver for this chip
+	  in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config EEXPRESS
+	tristate "EtherExpress 16 support"
+	depends on ISA
+	---help---
+	  If you have an EtherExpress16 network (Ethernet) card, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that the Intel
+	  EtherExpress16 card used to be regarded as a very poor choice
+	  because the driver was very unreliable. We now have a new driver
+	  that should do better.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eexpress.
+
+config EEXPRESS_PRO
+	tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y. This
+	  driver supports Intel i82595{FX,TX} based boards. Note however
+	  that the EtherExpress PRO/100 Ethernet card has its own separate
+	  driver.  Please read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eepro.
+
+config LASI_82596
+	tristate "Lasi ethernet"
+	depends on GSC
+	---help---
+	  Say Y here to support the builtin Intel 82596 ethernet controller
+	  found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
+
+config LP486E
+	tristate "LP486E on board Ethernet"
+	depends on ISA
+	---help---
+	  Say Y here to support the 82596-based on-board Ethernet controller
+	  for the Panther motherboard, which is one of the two shipped in the
+	  Intel Professional Workstation.
+
+config MVME16x_NET
+	tristate "MVME16x Ethernet support"
+	depends on MVME16x
+	---help---
+	  This is the driver for the Ethernet interface on the Motorola
+	  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config NI52
+	tristate "NI5210 support"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni52.
+
+config SNI_82596
+	tristate "SNI RM ethernet"
+	depends on SNI_RM
+	---help---
+	  Say Y here to support the on-board Intel 82596 ethernet controller
+	  built into SNI RM machines.
+
+config SUN3_82586
+	bool "Sun3 on-board Intel 82586 support"
+	depends on SUN3
+	---help---
+	  This driver enables support for the on-board Intel 82586 based
+	  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
+	  that this driver does not support 82586-based adapters on additional
+	  VME boards.
+
+config ZNET
+	tristate "Zenith Z-Note support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ISA_DMA_API
+	---help---
+	  The Zenith Z-Note notebook computer has a built-in network
+	  (Ethernet) card, and this is the Linux driver for it. Note that the
+	  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
+	  by this driver. Read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+endif # NET_VENDOR_I825XX
diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile
new file mode 100644
index 000000000000..f68a3694968a
--- /dev/null
+++ b/drivers/net/ethernet/i825xx/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the Intel 82586/82593/82596 chipset device drivers.
+#
+
+obj-$(CONFIG_ARM_ETHER1) += ether1.o
+obj-$(CONFIG_EEXPRESS) += eexpress.o
+obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
+obj-$(CONFIG_ELPLUS) += 3c505.o
+obj-$(CONFIG_EL16) += 3c507.o
+obj-$(CONFIG_ELMC) += 3c523.o
+obj-$(CONFIG_ELMC_II) += 3c527.o
+obj-$(CONFIG_LP486E) += lp486e.o
+obj-$(CONFIG_NI52) += ni52.o
+obj-$(CONFIG_SUN3_82586) += sun3_82586.o
+obj-$(CONFIG_ZNET) += znet.o
+obj-$(CONFIG_APRICOT) += 82596.o
+obj-$(CONFIG_LASI_82596) += lasi_82596.o
+obj-$(CONFIG_SNI_82596) += sni_82596.o
+obj-$(CONFIG_MVME16x_NET) += 82596.o
+obj-$(CONFIG_BVME6000_NET) += 82596.o
diff --git a/drivers/net/eepro.c b/drivers/net/ethernet/i825xx/eepro.c
index dfeb006035df..067c46069a11 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/ethernet/i825xx/eepro.c
@@ -743,7 +743,7 @@ static const struct net_device_ops eepro_netdev_ops = {
  	.ndo_open               = eepro_open,
  	.ndo_stop               = eepro_close,
  	.ndo_start_xmit    	= eepro_send_packet,
- 	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
  	.ndo_tx_timeout		= eepro_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/eexpress.c b/drivers/net/ethernet/i825xx/eexpress.c
index a19228563efd..3a9580f3d4dd 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/ethernet/i825xx/eexpress.c
@@ -1047,7 +1047,7 @@ static const struct net_device_ops eexp_netdev_ops = {
 	.ndo_open 		= eexp_open,
 	.ndo_stop 		= eexp_close,
 	.ndo_start_xmit		= eexp_xmit,
-	.ndo_set_multicast_list = eexp_set_multicast,
+	.ndo_set_rx_mode	= eexp_set_multicast,
 	.ndo_tx_timeout		= eexp_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/eexpress.h b/drivers/net/ethernet/i825xx/eexpress.h
index dc9c6ea289e9..dc9c6ea289e9 100644
--- a/drivers/net/eexpress.h
+++ b/drivers/net/ethernet/i825xx/eexpress.h
diff --git a/drivers/net/arm/ether1.c b/drivers/net/ethernet/i825xx/ether1.c
index b00781c02d5d..42e90a97c7a5 100644
--- a/drivers/net/arm/ether1.c
+++ b/drivers/net/ethernet/i825xx/ether1.c
@@ -985,7 +985,7 @@ static const struct net_device_ops ether1_netdev_ops = {
 	.ndo_open		= ether1_open,
 	.ndo_stop		= ether1_close,
 	.ndo_start_xmit		= ether1_sendpacket,
-	.ndo_set_multicast_list	= ether1_setmulticastlist,
+	.ndo_set_rx_mode	= ether1_setmulticastlist,
 	.ndo_tx_timeout		= ether1_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/arm/ether1.h b/drivers/net/ethernet/i825xx/ether1.h
index 3a5830ab3dc7..3a5830ab3dc7 100644
--- a/drivers/net/arm/ether1.h
+++ b/drivers/net/ethernet/i825xx/ether1.h
diff --git a/drivers/net/lasi_82596.c b/drivers/net/ethernet/i825xx/lasi_82596.c
index 6eba352c52e0..6eba352c52e0 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/ethernet/i825xx/lasi_82596.c
diff --git a/drivers/net/lib82596.c b/drivers/net/ethernet/i825xx/lib82596.c
index 9e042894479b..3efbd8dbb63d 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/ethernet/i825xx/lib82596.c
@@ -1038,7 +1038,7 @@ static const struct net_device_ops i596_netdev_ops = {
 	.ndo_open		= i596_open,
 	.ndo_stop		= i596_close,
 	.ndo_start_xmit		= i596_start_xmit,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_tx_timeout		= i596_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/lp486e.c b/drivers/net/ethernet/i825xx/lp486e.c
index 385a95311cd2..414044b3cb11 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/ethernet/i825xx/lp486e.c
@@ -954,7 +954,7 @@ static const struct net_device_ops i596_netdev_ops = {
 	.ndo_open		= i596_open,
 	.ndo_stop		= i596_close,
 	.ndo_start_xmit		= i596_start_xmit,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_tx_timeout		= i596_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/ni52.c b/drivers/net/ethernet/i825xx/ni52.c
index d973fc6c6b88..c0893715ef47 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ethernet/i825xx/ni52.c
@@ -445,7 +445,7 @@ static const struct net_device_ops ni52_netdev_ops = {
 	.ndo_get_stats		= ni52_get_stats,
 	.ndo_tx_timeout 	= ni52_timeout,
 	.ndo_start_xmit 	= ni52_send_packet,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ni52.h b/drivers/net/ethernet/i825xx/ni52.h
index 0a03b2883327..0a03b2883327 100644
--- a/drivers/net/ni52.h
+++ b/drivers/net/ethernet/i825xx/ni52.h
diff --git a/drivers/net/sni_82596.c b/drivers/net/ethernet/i825xx/sni_82596.c
index 6b2a88817473..6b2a88817473 100644
--- a/drivers/net/sni_82596.c
+++ b/drivers/net/ethernet/i825xx/sni_82596.c
diff --git a/drivers/net/sun3_82586.c b/drivers/net/ethernet/i825xx/sun3_82586.c
index b6ae53bada75..6ef5e11d1c84 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/ethernet/i825xx/sun3_82586.c
@@ -333,7 +333,7 @@ static const struct net_device_ops sun3_82586_netdev_ops = {
 	.ndo_open		= sun3_82586_open,
 	.ndo_stop		= sun3_82586_close,
 	.ndo_start_xmit		= sun3_82586_send_packet,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_tx_timeout		= sun3_82586_timeout,
 	.ndo_get_stats		= sun3_82586_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/sun3_82586.h b/drivers/net/ethernet/i825xx/sun3_82586.h
index 93346f00486b..93346f00486b 100644
--- a/drivers/net/sun3_82586.h
+++ b/drivers/net/ethernet/i825xx/sun3_82586.h
diff --git a/drivers/net/znet.c b/drivers/net/ethernet/i825xx/znet.c
index 8b8881718f5e..962b4c421f3f 100644
--- a/drivers/net/znet.c
+++ b/drivers/net/ethernet/i825xx/znet.c
@@ -356,7 +356,7 @@ static const struct net_device_ops znet_netdev_ops = {
 	.ndo_open		= znet_open,
 	.ndo_stop		= znet_close,
 	.ndo_start_xmit		= znet_send_packet,
-	.ndo_set_multicast_list = znet_set_multicast_list,
+	.ndo_set_rx_mode	= znet_set_multicast_list,
 	.ndo_tx_timeout		= znet_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/ethernet/ibm/Kconfig b/drivers/net/ethernet/ibm/Kconfig
new file mode 100644
index 000000000000..9e16f3fa97b2
--- /dev/null
+++ b/drivers/net/ethernet/ibm/Kconfig
@@ -0,0 +1,48 @@
+#
+# IBM device configuration.
+#
+
+config NET_VENDOR_IBM
+	bool "IBM devices"
+	default y
+	depends on MCA || PPC_PSERIES || PPC_PSERIES || PPC_DCR || \
+		   (IBMEBUS && INET && SPARSEMEM)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about IBM devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_IBM
+
+config IBMVETH
+	tristate "IBM LAN Virtual Ethernet support"
+	depends on PPC_PSERIES
+	---help---
+	  This driver supports virtual ethernet adapters on newer IBM iSeries
+	  and pSeries systems.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called ibmveth.
+
+config ISERIES_VETH
+	tristate "iSeries Virtual Ethernet driver support"
+	depends on PPC_ISERIES
+
+source "drivers/net/ethernet/ibm/emac/Kconfig"
+
+config EHEA
+	tristate "eHEA Ethernet support"
+	depends on IBMEBUS && INET && SPARSEMEM
+	select INET_LRO
+	---help---
+	  This driver supports the IBM pSeries eHEA ethernet adapter.
+
+	  To compile the driver as a module, choose M here. The module
+	  will be called ehea.
+
+endif # NET_VENDOR_IBM
diff --git a/drivers/net/ethernet/ibm/Makefile b/drivers/net/ethernet/ibm/Makefile
new file mode 100644
index 000000000000..5a7d4e9ac803
--- /dev/null
+++ b/drivers/net/ethernet/ibm/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for th IBM network device drivers.
+#
+
+obj-$(CONFIG_IBMVETH) += ibmveth.o
+obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
+obj-$(CONFIG_IBM_EMAC) += emac/
+obj-$(CONFIG_EHEA) += ehea/
diff --git a/drivers/net/ehea/Makefile b/drivers/net/ethernet/ibm/ehea/Makefile
index 775d9969b5c2..775d9969b5c2 100644
--- a/drivers/net/ehea/Makefile
+++ b/drivers/net/ethernet/ibm/ehea/Makefile
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ethernet/ibm/ehea/ehea.h
index 7dd5e6a0d998..7dd5e6a0d998 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ethernet/ibm/ehea/ehea.h
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ethernet/ibm/ehea/ehea_ethtool.c
index 7f642aef5e82..7f642aef5e82 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_ethtool.c
diff --git a/drivers/net/ehea/ehea_hw.h b/drivers/net/ethernet/ibm/ehea/ehea_hw.h
index 567981b4b2cc..567981b4b2cc 100644
--- a/drivers/net/ehea/ehea_hw.h
+++ b/drivers/net/ethernet/ibm/ehea/ehea_hw.h
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index be2cb4ab8b4f..583bcd32e543 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -3161,7 +3161,7 @@ static const struct net_device_ops ehea_netdev_ops = {
 	.ndo_get_stats		= ehea_get_stats,
 	.ndo_set_mac_address	= ehea_set_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= ehea_set_multicast_list,
+	.ndo_set_rx_mode	= ehea_set_multicast_list,
 	.ndo_change_mtu		= ehea_change_mtu,
 	.ndo_vlan_rx_add_vid	= ehea_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= ehea_vlan_rx_kill_vid,
diff --git a/drivers/net/ehea/ehea_phyp.c b/drivers/net/ethernet/ibm/ehea/ehea_phyp.c
index 0506967b9044..0506967b9044 100644
--- a/drivers/net/ehea/ehea_phyp.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_phyp.c
diff --git a/drivers/net/ehea/ehea_phyp.h b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h
index 2f8174c248bc..2f8174c248bc 100644
--- a/drivers/net/ehea/ehea_phyp.h
+++ b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ethernet/ibm/ehea/ehea_qmr.c
index 95b9f4fa811e..95b9f4fa811e 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_qmr.c
diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ethernet/ibm/ehea/ehea_qmr.h
index fddff8ec8cfd..fddff8ec8cfd 100644
--- a/drivers/net/ehea/ehea_qmr.h
+++ b/drivers/net/ethernet/ibm/ehea/ehea_qmr.h
diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ethernet/ibm/emac/Kconfig
index 78a1628c9892..3f44a30e0615 100644
--- a/drivers/net/ibm_newemac/Kconfig
+++ b/drivers/net/ethernet/ibm/emac/Kconfig
@@ -1,4 +1,4 @@
-config IBM_NEW_EMAC
+config IBM_EMAC
 	tristate "IBM EMAC Ethernet support"
 	depends on PPC_DCR
 	select CRC32
@@ -7,29 +7,29 @@ config IBM_NEW_EMAC
 	  typically found on 4xx embedded PowerPC chips, but also on the
 	  Axon southbridge for Cell.
 
-config IBM_NEW_EMAC_RXB
+config IBM_EMAC_RXB
 	int "Number of receive buffers"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "128"
 
-config IBM_NEW_EMAC_TXB
+config IBM_EMAC_TXB
 	int "Number of transmit buffers"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "64"
 
-config IBM_NEW_EMAC_POLL_WEIGHT
+config IBM_EMAC_POLL_WEIGHT
 	int "MAL NAPI polling weight"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "32"
 
-config IBM_NEW_EMAC_RX_COPY_THRESHOLD
+config IBM_EMAC_RX_COPY_THRESHOLD
 	int "RX skb copy threshold (bytes)"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "256"
 
-config IBM_NEW_EMAC_RX_SKB_HEADROOM
+config IBM_EMAC_RX_SKB_HEADROOM
 	int "Additional RX skb headroom (bytes)"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "0"
 	help
 	  Additional receive skb headroom. Note, that driver
@@ -39,38 +39,38 @@ config IBM_NEW_EMAC_RX_SKB_HEADROOM
 
 	  If unsure, set to 0.
 
-config IBM_NEW_EMAC_DEBUG
+config IBM_EMAC_DEBUG
 	bool "Debugging"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default n
 
 # The options below has to be select'ed by the respective
 # processor types or platforms
 
-config IBM_NEW_EMAC_ZMII
+config IBM_EMAC_ZMII
 	bool
 	default n
 
-config IBM_NEW_EMAC_RGMII
+config IBM_EMAC_RGMII
 	bool
 	default n
 
-config IBM_NEW_EMAC_TAH
+config IBM_EMAC_TAH
 	bool
 	default n
 
-config IBM_NEW_EMAC_EMAC4
+config IBM_EMAC_EMAC4
 	bool
 	default n
 
-config IBM_NEW_EMAC_NO_FLOW_CTRL
+config IBM_EMAC_NO_FLOW_CTRL
 	bool
 	default n
 
-config IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+config IBM_EMAC_MAL_CLR_ICINTSTAT
 	bool
 	default n
 
-config IBM_NEW_EMAC_MAL_COMMON_ERR
+config IBM_EMAC_MAL_COMMON_ERR
 	bool
 	default n
diff --git a/drivers/net/ethernet/ibm/emac/Makefile b/drivers/net/ethernet/ibm/emac/Makefile
new file mode 100644
index 000000000000..eba21835d90d
--- /dev/null
+++ b/drivers/net/ethernet/ibm/emac/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the PowerPC 4xx on-chip ethernet driver
+#
+
+obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
+
+ibm_emac-y := mal.o core.o phy.o
+ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += zmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += rgmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_TAH) += tah.o
+ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += debug.o
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 725399ea0690..a573df1fafb6 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -39,6 +39,7 @@
 #include <linux/bitops.h>
 #include <linux/workqueue.h>
 #include <linux/of.h>
+#include <linux/of_net.h>
 #include <linux/slab.h>
 
 #include <asm/processor.h>
@@ -89,7 +90,7 @@ MODULE_LICENSE("GPL");
 /* If packet size is less than this number, we allocate small skb and copy packet
  * contents into it instead of just sending original big skb up
  */
-#define EMAC_RX_COPY_THRESH		CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD
+#define EMAC_RX_COPY_THRESH		CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
 
 /* Since multiple EMACs share MDIO lines in various ways, we need
  * to avoid re-using the same PHY ID in cases where the arch didn't
@@ -1617,7 +1618,7 @@ static void emac_parse_rx_error(struct emac_instance *dev, u16 ctrl)
 static inline void emac_rx_csum(struct emac_instance *dev,
 				struct sk_buff *skb, u16 ctrl)
 {
-#ifdef CONFIG_IBM_NEW_EMAC_TAH
+#ifdef CONFIG_IBM_EMAC_TAH
 	if (!ctrl && dev->tah_dev) {
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 		++dev->stats.rx_packets_csum;
@@ -2506,18 +2507,6 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 {
 	struct device_node *np = dev->ofdev->dev.of_node;
 	const void *p;
-	unsigned int plen;
-	const char *pm, *phy_modes[] = {
-		[PHY_MODE_NA] = "",
-		[PHY_MODE_MII] = "mii",
-		[PHY_MODE_RMII] = "rmii",
-		[PHY_MODE_SMII] = "smii",
-		[PHY_MODE_RGMII] = "rgmii",
-		[PHY_MODE_TBI] = "tbi",
-		[PHY_MODE_GMII] = "gmii",
-		[PHY_MODE_RTBI] = "rtbi",
-		[PHY_MODE_SGMII] = "sgmii",
-	};
 
 	/* Read config from device-tree */
 	if (emac_read_uint_prop(np, "mal-device", &dev->mal_ph, 1))
@@ -2566,23 +2555,9 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 		dev->mal_burst_size = 256;
 
 	/* PHY mode needs some decoding */
-	dev->phy_mode = PHY_MODE_NA;
-	pm = of_get_property(np, "phy-mode", &plen);
-	if (pm != NULL) {
-		int i;
-		for (i = 0; i < ARRAY_SIZE(phy_modes); i++)
-			if (!strcasecmp(pm, phy_modes[i])) {
-				dev->phy_mode = i;
-				break;
-			}
-	}
-
-	/* Backward compat with non-final DT */
-	if (dev->phy_mode == PHY_MODE_NA && pm != NULL && plen == 4) {
-		u32 nmode = *(const u32 *)pm;
-		if (nmode > PHY_MODE_NA && nmode <= PHY_MODE_SGMII)
-			dev->phy_mode = nmode;
-	}
+	dev->phy_mode = of_get_phy_mode(np);
+	if (dev->phy_mode < 0)
+		dev->phy_mode = PHY_MODE_NA;
 
 	/* Check EMAC version */
 	if (of_device_is_compatible(np, "ibm,emac4sync")) {
@@ -2602,7 +2577,7 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 		    of_device_is_compatible(np, "ibm,emac-440gr"))
 			dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
 		if (of_device_is_compatible(np, "ibm,emac-405ez")) {
-#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
+#ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL
 			dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
 #else
 			printk(KERN_ERR "%s: Flow control not disabled!\n",
@@ -2626,7 +2601,7 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 
 	/* Enable TAH/ZMII/RGMII features as found */
 	if (dev->tah_ph != 0) {
-#ifdef CONFIG_IBM_NEW_EMAC_TAH
+#ifdef CONFIG_IBM_EMAC_TAH
 		dev->features |= EMAC_FTR_HAS_TAH;
 #else
 		printk(KERN_ERR "%s: TAH support not enabled !\n",
@@ -2636,7 +2611,7 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 	}
 
 	if (dev->zmii_ph != 0) {
-#ifdef CONFIG_IBM_NEW_EMAC_ZMII
+#ifdef CONFIG_IBM_EMAC_ZMII
 		dev->features |= EMAC_FTR_HAS_ZMII;
 #else
 		printk(KERN_ERR "%s: ZMII support not enabled !\n",
@@ -2646,7 +2621,7 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 	}
 
 	if (dev->rgmii_ph != 0) {
-#ifdef CONFIG_IBM_NEW_EMAC_RGMII
+#ifdef CONFIG_IBM_EMAC_RGMII
 		dev->features |= EMAC_FTR_HAS_RGMII;
 #else
 		printk(KERN_ERR "%s: RGMII support not enabled !\n",
@@ -2686,7 +2661,7 @@ static const struct net_device_ops emac_netdev_ops = {
 	.ndo_open		= emac_open,
 	.ndo_stop		= emac_close,
 	.ndo_get_stats		= emac_stats,
-	.ndo_set_multicast_list	= emac_set_multicast_list,
+	.ndo_set_rx_mode	= emac_set_multicast_list,
 	.ndo_do_ioctl		= emac_ioctl,
 	.ndo_tx_timeout		= emac_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -2699,7 +2674,7 @@ static const struct net_device_ops emac_gige_netdev_ops = {
 	.ndo_open		= emac_open,
 	.ndo_stop		= emac_close,
 	.ndo_get_stats		= emac_stats,
-	.ndo_set_multicast_list	= emac_set_multicast_list,
+	.ndo_set_rx_mode	= emac_set_multicast_list,
 	.ndo_do_ioctl		= emac_ioctl,
 	.ndo_tx_timeout		= emac_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ethernet/ibm/emac/core.h
index 4fec0844d59d..fa3ec57935fa 100644
--- a/drivers/net/ibm_newemac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -47,8 +47,8 @@
 #include "tah.h"
 #include "debug.h"
 
-#define NUM_TX_BUFF			CONFIG_IBM_NEW_EMAC_TXB
-#define NUM_RX_BUFF			CONFIG_IBM_NEW_EMAC_RXB
+#define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
+#define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
 
 /* Simple sanity check */
 #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
@@ -72,7 +72,7 @@ static inline int emac_rx_size(int mtu)
 #define EMAC_DMA_ALIGN(x)		ALIGN((x), dma_get_cache_alignment())
 
 #define EMAC_RX_SKB_HEADROOM		\
-	EMAC_DMA_ALIGN(CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM)
+	EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
 
 /* Size of RX skb for the given MTU */
 static inline int emac_rx_skb_size(int mtu)
@@ -335,21 +335,21 @@ enum {
 	EMAC_FTRS_ALWAYS	= 0,
 
 	EMAC_FTRS_POSSIBLE	=
-#ifdef CONFIG_IBM_NEW_EMAC_EMAC4
+#ifdef CONFIG_IBM_EMAC_EMAC4
 	    EMAC_FTR_EMAC4	| EMAC_FTR_EMAC4SYNC	|
 	    EMAC_FTR_HAS_NEW_STACR	|
 	    EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
 #endif
-#ifdef CONFIG_IBM_NEW_EMAC_TAH
+#ifdef CONFIG_IBM_EMAC_TAH
 	    EMAC_FTR_HAS_TAH	|
 #endif
-#ifdef CONFIG_IBM_NEW_EMAC_ZMII
+#ifdef CONFIG_IBM_EMAC_ZMII
 	    EMAC_FTR_HAS_ZMII	|
 #endif
-#ifdef CONFIG_IBM_NEW_EMAC_RGMII
+#ifdef CONFIG_IBM_EMAC_RGMII
 	    EMAC_FTR_HAS_RGMII	|
 #endif
-#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
+#ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL
 	    EMAC_FTR_NO_FLOW_CONTROL_40x |
 #endif
 	EMAC_FTR_460EX_PHY_CLK_FIX |
diff --git a/drivers/net/ibm_newemac/debug.c b/drivers/net/ethernet/ibm/emac/debug.c
index 8c6c1e2a8750..8c6c1e2a8750 100644
--- a/drivers/net/ibm_newemac/debug.c
+++ b/drivers/net/ethernet/ibm/emac/debug.c
diff --git a/drivers/net/ibm_newemac/debug.h b/drivers/net/ethernet/ibm/emac/debug.h
index e596c77ccdf7..90477fe69d0c 100644
--- a/drivers/net/ibm_newemac/debug.h
+++ b/drivers/net/ethernet/ibm/emac/debug.h
@@ -24,7 +24,7 @@
 
 #include "core.h"
 
-#if defined(CONFIG_IBM_NEW_EMAC_DEBUG)
+#if defined(CONFIG_IBM_EMAC_DEBUG)
 
 struct emac_instance;
 struct mal_instance;
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h
index 8a61b597a169..1568278d759a 100644
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ethernet/ibm/emac/emac.h
@@ -26,6 +26,7 @@
 #define __IBM_NEWEMAC_H
 
 #include <linux/types.h>
+#include <linux/phy.h>
 
 /* EMAC registers 			Write Access rules */
 struct emac_regs {
@@ -106,15 +107,15 @@ struct emac_regs {
 /*
  * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY)
  */
-#define PHY_MODE_NA	0
-#define PHY_MODE_MII	1
-#define PHY_MODE_RMII	2
-#define PHY_MODE_SMII	3
-#define PHY_MODE_RGMII	4
-#define PHY_MODE_TBI	5
-#define PHY_MODE_GMII	6
-#define PHY_MODE_RTBI	7
-#define PHY_MODE_SGMII	8
+#define PHY_MODE_NA	PHY_INTERFACE_MODE_NA
+#define PHY_MODE_MII	PHY_INTERFACE_MODE_MII
+#define PHY_MODE_RMII	PHY_INTERFACE_MODE_RMII
+#define PHY_MODE_SMII	PHY_INTERFACE_MODE_SMII
+#define PHY_MODE_RGMII	PHY_INTERFACE_MODE_RGMII
+#define PHY_MODE_TBI	PHY_INTERFACE_MODE_TBI
+#define PHY_MODE_GMII	PHY_INTERFACE_MODE_GMII
+#define PHY_MODE_RTBI	PHY_INTERFACE_MODE_RTBI
+#define PHY_MODE_SGMII	PHY_INTERFACE_MODE_SGMII
 
 /* EMACx_MR0 */
 #define EMAC_MR0_RXI			0x80000000
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index d268f404b7b0..f3c50b97ec61 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -577,8 +577,8 @@ static int __devinit mal_probe(struct platform_device *ofdev)
 	}
 
 	if (of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal-405ez")) {
-#if defined(CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT) && \
-		defined(CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR)
+#if defined(CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT) && \
+		defined(CONFIG_IBM_EMAC_MAL_COMMON_ERR)
 		mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
 				MAL_FTR_COMMON_ERR_INT);
 #else
@@ -616,7 +616,7 @@ static int __devinit mal_probe(struct platform_device *ofdev)
 	init_dummy_netdev(&mal->dummy_dev);
 
 	netif_napi_add(&mal->dummy_dev, &mal->napi, mal_poll,
-		       CONFIG_IBM_NEW_EMAC_POLL_WEIGHT);
+		       CONFIG_IBM_EMAC_POLL_WEIGHT);
 
 	/* Load power-on reset defaults */
 	mal_reset(mal);
diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ethernet/ibm/emac/mal.h
index 66084214bf45..d06f985bda32 100644
--- a/drivers/net/ibm_newemac/mal.h
+++ b/drivers/net/ethernet/ibm/emac/mal.h
@@ -245,10 +245,10 @@ enum {
 	MAL_FTRS_ALWAYS = 0,
 
 	MAL_FTRS_POSSIBLE =
-#ifdef CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+#ifdef CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT
 		MAL_FTR_CLEAR_ICINTSTAT |
 #endif
-#ifdef CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR
+#ifdef CONFIG_IBM_EMAC_MAL_COMMON_ERR
 		MAL_FTR_COMMON_ERR_INT |
 #endif
 		0,
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ethernet/ibm/emac/phy.c
index ac9d964e59ec..ab4e5969fe65 100644
--- a/drivers/net/ibm_newemac/phy.c
+++ b/drivers/net/ethernet/ibm/emac/phy.c
@@ -28,12 +28,15 @@
 #include "emac.h"
 #include "phy.h"
 
-static inline int phy_read(struct mii_phy *phy, int reg)
+#define phy_read _phy_read
+#define phy_write _phy_write
+
+static inline int _phy_read(struct mii_phy *phy, int reg)
 {
 	return phy->mdio_read(phy->dev, phy->address, reg);
 }
 
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
+static inline void _phy_write(struct mii_phy *phy, int reg, int val)
 {
 	phy->mdio_write(phy->dev, phy->address, reg, val);
 }
diff --git a/drivers/net/ibm_newemac/phy.h b/drivers/net/ethernet/ibm/emac/phy.h
index 5d2bf4cbe50b..5d2bf4cbe50b 100644
--- a/drivers/net/ibm_newemac/phy.h
+++ b/drivers/net/ethernet/ibm/emac/phy.h
diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ethernet/ibm/emac/rgmii.c
index 4fa53f3def64..4fa53f3def64 100644
--- a/drivers/net/ibm_newemac/rgmii.c
+++ b/drivers/net/ethernet/ibm/emac/rgmii.c
diff --git a/drivers/net/ibm_newemac/rgmii.h b/drivers/net/ethernet/ibm/emac/rgmii.h
index d69799049865..9296b6c5f920 100644
--- a/drivers/net/ibm_newemac/rgmii.h
+++ b/drivers/net/ethernet/ibm/emac/rgmii.h
@@ -54,7 +54,7 @@ struct rgmii_instance {
 	struct platform_device		*ofdev;
 };
 
-#ifdef CONFIG_IBM_NEW_EMAC_RGMII
+#ifdef CONFIG_IBM_EMAC_RGMII
 
 extern int rgmii_init(void);
 extern void rgmii_exit(void);
@@ -77,6 +77,6 @@ extern void *rgmii_dump_regs(struct platform_device *ofdev, void *buf);
 # define rgmii_set_speed(x,y,z)	do { } while(0)
 # define rgmii_get_regs_len(x)	0
 # define rgmii_dump_regs(x,buf)	(buf)
-#endif				/* !CONFIG_IBM_NEW_EMAC_RGMII */
+#endif				/* !CONFIG_IBM_EMAC_RGMII */
 
 #endif /* __IBM_NEWEMAC_RGMII_H */
diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ethernet/ibm/emac/tah.c
index 5f51bf7c9dc5..5f51bf7c9dc5 100644
--- a/drivers/net/ibm_newemac/tah.c
+++ b/drivers/net/ethernet/ibm/emac/tah.c
diff --git a/drivers/net/ibm_newemac/tah.h b/drivers/net/ethernet/ibm/emac/tah.h
index 61dbeca006d1..3437ab4964c7 100644
--- a/drivers/net/ibm_newemac/tah.h
+++ b/drivers/net/ethernet/ibm/emac/tah.h
@@ -70,7 +70,7 @@ struct tah_instance {
 #define TAH_MR_DTFP		0x00100000
 #define TAH_MR_DIG		0x00080000
 
-#ifdef CONFIG_IBM_NEW_EMAC_TAH
+#ifdef CONFIG_IBM_EMAC_TAH
 
 extern int tah_init(void);
 extern void tah_exit(void);
@@ -90,6 +90,6 @@ extern void *tah_dump_regs(struct platform_device *ofdev, void *buf);
 # define tah_get_regs_len(x)	0
 # define tah_dump_regs(x,buf)	(buf)
 
-#endif				/* !CONFIG_IBM_NEW_EMAC_TAH */
+#endif				/* !CONFIG_IBM_EMAC_TAH */
 
 #endif /* __IBM_NEWEMAC_TAH_H */
diff --git a/drivers/net/ibm_newemac/zmii.c b/drivers/net/ethernet/ibm/emac/zmii.c
index 97449e786d61..97449e786d61 100644
--- a/drivers/net/ibm_newemac/zmii.c
+++ b/drivers/net/ethernet/ibm/emac/zmii.c
diff --git a/drivers/net/ibm_newemac/zmii.h b/drivers/net/ethernet/ibm/emac/zmii.h
index 1333fa2b2781..ceaed823a83c 100644
--- a/drivers/net/ibm_newemac/zmii.h
+++ b/drivers/net/ethernet/ibm/emac/zmii.h
@@ -51,7 +51,7 @@ struct zmii_instance {
 	struct platform_device		*ofdev;
 };
 
-#ifdef CONFIG_IBM_NEW_EMAC_ZMII
+#ifdef CONFIG_IBM_EMAC_ZMII
 
 extern int zmii_init(void);
 extern void zmii_exit(void);
@@ -73,6 +73,6 @@ extern void *zmii_dump_regs(struct platform_device *ofdev, void *buf);
 # define zmii_set_speed(x,y,z)	do { } while(0)
 # define zmii_get_regs_len(x)	0
 # define zmii_dump_regs(x,buf)	(buf)
-#endif				/* !CONFIG_IBM_NEW_EMAC_ZMII */
+#endif				/* !CONFIG_IBM_EMAC_ZMII */
 
 #endif /* __IBM_NEWEMAC_ZMII_H */
diff --git a/drivers/net/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index ba99af05bf62..bba1ffcd92d1 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1299,7 +1299,7 @@ static const struct net_device_ops ibmveth_netdev_ops = {
 	.ndo_open		= ibmveth_open,
 	.ndo_stop		= ibmveth_close,
 	.ndo_start_xmit		= ibmveth_start_xmit,
-	.ndo_set_multicast_list	= ibmveth_set_multicast_list,
+	.ndo_set_rx_mode	= ibmveth_set_multicast_list,
 	.ndo_do_ioctl		= ibmveth_ioctl,
 	.ndo_change_mtu		= ibmveth_change_mtu,
 	.ndo_fix_features	= ibmveth_fix_features,
diff --git a/drivers/net/ibmveth.h b/drivers/net/ethernet/ibm/ibmveth.h
index 43a794fab9ff..43a794fab9ff 100644
--- a/drivers/net/ibmveth.h
+++ b/drivers/net/ethernet/ibm/ibmveth.h
diff --git a/drivers/net/iseries_veth.c b/drivers/net/ethernet/ibm/iseries_veth.c
index 53dd39e9130e..4326681df382 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/ethernet/ibm/iseries_veth.c
@@ -1009,7 +1009,7 @@ static const struct net_device_ops veth_netdev_ops = {
 	.ndo_stop		= veth_close,
 	.ndo_start_xmit		= veth_start_xmit,
 	.ndo_change_mtu		= veth_change_mtu,
-	.ndo_set_multicast_list	= veth_set_multicast_list,
+	.ndo_set_rx_mode	= veth_set_multicast_list,
 	.ndo_set_mac_address	= NULL,
 	.ndo_validate_addr	= eth_validate_addr,
 };
diff --git a/drivers/net/ethernet/icplus/Kconfig b/drivers/net/ethernet/icplus/Kconfig
new file mode 100644
index 000000000000..e88822276269
--- /dev/null
+++ b/drivers/net/ethernet/icplus/Kconfig
@@ -0,0 +1,13 @@
+#
+# IC Plus device configuration
+#
+
+config IP1000
+	tristate "IP1000 Gigabit Ethernet support"
+	depends on PCI && EXPERIMENTAL
+	select MII
+	---help---
+	  This driver supports IP1000 gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ipg.  This is recommended.
diff --git a/drivers/net/ethernet/icplus/Makefile b/drivers/net/ethernet/icplus/Makefile
new file mode 100644
index 000000000000..5bc87c1f36aa
--- /dev/null
+++ b/drivers/net/ethernet/icplus/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the IC Plus device drivers
+#
+
+obj-$(CONFIG_IP1000) += ipg.o
diff --git a/drivers/net/ipg.c b/drivers/net/ethernet/icplus/ipg.c
index d4aa40adf1e9..8fd80a00b898 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ethernet/icplus/ipg.c
@@ -20,6 +20,9 @@
  *   http://www.icplus.com.tw
  *   jesse@icplus.com.tw
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/crc32.h>
 #include <linux/ethtool.h>
 #include <linux/interrupt.h>
@@ -67,7 +70,7 @@ MODULE_LICENSE("GPL");
  * Variable record -- index by leading revision/length
  * Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
  */
-static unsigned short DefaultPhyParam[] = {
+static const unsigned short DefaultPhyParam[] = {
 	/* 11/12/03 IP1000A v1-3 rev=0x40 */
 	/*--------------------------------------------------------------------------
 	(0x4000|(15*4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 22, 0x85bd, 24, 0xfff2,
@@ -85,7 +88,7 @@ static unsigned short DefaultPhyParam[] = {
 	0x0000
 };
 
-static const char *ipg_brand_name[] = {
+static const char * const ipg_brand_name[] = {
 	"IC PLUS IP1000 1000/100/10 based NIC",
 	"Sundance Technology ST2021 based NIC",
 	"Tamarack Microelectronics TC9020/9021 based NIC",
@@ -118,23 +121,23 @@ static void ipg_dump_rfdlist(struct net_device *dev)
 
 	IPG_DEBUG_MSG("_dump_rfdlist\n");
 
-	printk(KERN_INFO "rx_current = %2.2x\n", sp->rx_current);
-	printk(KERN_INFO "rx_dirty   = %2.2x\n", sp->rx_dirty);
-	printk(KERN_INFO "RFDList start address = %16.16lx\n",
-	       (unsigned long) sp->rxd_map);
-	printk(KERN_INFO "RFDListPtr register   = %8.8x%8.8x\n",
-	       ipg_r32(IPG_RFDLISTPTR1), ipg_r32(IPG_RFDLISTPTR0));
+	netdev_info(dev, "rx_current = %02x\n", sp->rx_current);
+	netdev_info(dev, "rx_dirty   = %02x\n", sp->rx_dirty);
+	netdev_info(dev, "RFDList start address = %016lx\n",
+		    (unsigned long)sp->rxd_map);
+	netdev_info(dev, "RFDListPtr register   = %08x%08x\n",
+		    ipg_r32(IPG_RFDLISTPTR1), ipg_r32(IPG_RFDLISTPTR0));
 
 	for (i = 0; i < IPG_RFDLIST_LENGTH; i++) {
 		offset = (u32) &sp->rxd[i].next_desc - (u32) sp->rxd;
-		printk(KERN_INFO "%2.2x %4.4x RFDNextPtr = %16.16lx\n", i,
-		       offset, (unsigned long) sp->rxd[i].next_desc);
+		netdev_info(dev, "%02x %04x RFDNextPtr = %016lx\n",
+			    i, offset, (unsigned long)sp->rxd[i].next_desc);
 		offset = (u32) &sp->rxd[i].rfs - (u32) sp->rxd;
-		printk(KERN_INFO "%2.2x %4.4x RFS        = %16.16lx\n", i,
-		       offset, (unsigned long) sp->rxd[i].rfs);
+		netdev_info(dev, "%02x %04x RFS        = %016lx\n",
+			    i, offset, (unsigned long)sp->rxd[i].rfs);
 		offset = (u32) &sp->rxd[i].frag_info - (u32) sp->rxd;
-		printk(KERN_INFO "%2.2x %4.4x frag_info   = %16.16lx\n", i,
-		       offset, (unsigned long) sp->rxd[i].frag_info);
+		netdev_info(dev, "%02x %04x frag_info   = %016lx\n",
+			    i, offset, (unsigned long)sp->rxd[i].frag_info);
 	}
 }
 
@@ -147,24 +150,24 @@ static void ipg_dump_tfdlist(struct net_device *dev)
 
 	IPG_DEBUG_MSG("_dump_tfdlist\n");
 
-	printk(KERN_INFO "tx_current         = %2.2x\n", sp->tx_current);
-	printk(KERN_INFO "tx_dirty = %2.2x\n", sp->tx_dirty);
-	printk(KERN_INFO "TFDList start address = %16.16lx\n",
-	       (unsigned long) sp->txd_map);
-	printk(KERN_INFO "TFDListPtr register   = %8.8x%8.8x\n",
-	       ipg_r32(IPG_TFDLISTPTR1), ipg_r32(IPG_TFDLISTPTR0));
+	netdev_info(dev, "tx_current         = %02x\n", sp->tx_current);
+	netdev_info(dev, "tx_dirty = %02x\n", sp->tx_dirty);
+	netdev_info(dev, "TFDList start address = %016lx\n",
+		    (unsigned long) sp->txd_map);
+	netdev_info(dev, "TFDListPtr register   = %08x%08x\n",
+		    ipg_r32(IPG_TFDLISTPTR1), ipg_r32(IPG_TFDLISTPTR0));
 
 	for (i = 0; i < IPG_TFDLIST_LENGTH; i++) {
 		offset = (u32) &sp->txd[i].next_desc - (u32) sp->txd;
-		printk(KERN_INFO "%2.2x %4.4x TFDNextPtr = %16.16lx\n", i,
-		       offset, (unsigned long) sp->txd[i].next_desc);
+		netdev_info(dev, "%02x %04x TFDNextPtr = %016lx\n",
+			    i, offset, (unsigned long)sp->txd[i].next_desc);
 
 		offset = (u32) &sp->txd[i].tfc - (u32) sp->txd;
-		printk(KERN_INFO "%2.2x %4.4x TFC        = %16.16lx\n", i,
-		       offset, (unsigned long) sp->txd[i].tfc);
+		netdev_info(dev, "%02x %04x TFC        = %016lx\n",
+			    i, offset, (unsigned long) sp->txd[i].tfc);
 		offset = (u32) &sp->txd[i].frag_info - (u32) sp->txd;
-		printk(KERN_INFO "%2.2x %4.4x frag_info   = %16.16lx\n", i,
-		       offset, (unsigned long) sp->txd[i].frag_info);
+		netdev_info(dev, "%02x %04x frag_info   = %016lx\n",
+			    i, offset, (unsigned long) sp->txd[i].frag_info);
 	}
 }
 #endif
@@ -480,6 +483,10 @@ static int ipg_config_autoneg(struct net_device *dev)
 	u32 mac_ctrl_val;
 	u32 asicctrl;
 	u8 phyctrl;
+	const char *speed;
+	const char *duplex;
+	const char *tx_desc;
+	const char *rx_desc;
 
 	IPG_DEBUG_MSG("_config_autoneg\n");
 
@@ -499,27 +506,27 @@ static int ipg_config_autoneg(struct net_device *dev)
 	 */
 	sp->tenmbpsmode = 0;
 
-	printk(KERN_INFO "%s: Link speed = ", dev->name);
-
 	/* Determine actual speed of operation. */
 	switch (phyctrl & IPG_PC_LINK_SPEED) {
 	case IPG_PC_LINK_SPEED_10MBPS:
-		printk("10Mbps.\n");
-		printk(KERN_INFO "%s: 10Mbps operational mode enabled.\n",
-		       dev->name);
+		speed = "10Mbps";
 		sp->tenmbpsmode = 1;
 		break;
 	case IPG_PC_LINK_SPEED_100MBPS:
-		printk("100Mbps.\n");
+		speed = "100Mbps";
 		break;
 	case IPG_PC_LINK_SPEED_1000MBPS:
-		printk("1000Mbps.\n");
+		speed = "1000Mbps";
 		break;
 	default:
-		printk("undefined!\n");
+		speed = "undefined!";
 		return 0;
 	}
 
+	netdev_info(dev, "Link speed = %s\n", speed);
+	if (sp->tenmbpsmode == 1)
+		netdev_info(dev, "10Mbps operational mode enabled\n");
+
 	if (phyctrl & IPG_PC_DUPLEX_STATUS) {
 		fullduplex = 1;
 		txflowcontrol = 1;
@@ -528,38 +535,41 @@ static int ipg_config_autoneg(struct net_device *dev)
 
 	/* Configure full duplex, and flow control. */
 	if (fullduplex == 1) {
+
 		/* Configure IPG for full duplex operation. */
-		printk(KERN_INFO "%s: setting full duplex, ", dev->name);
+
+		duplex = "full";
 
 		mac_ctrl_val |= IPG_MC_DUPLEX_SELECT_FD;
 
 		if (txflowcontrol == 1) {
-			printk("TX flow control");
+			tx_desc  = "";
 			mac_ctrl_val |= IPG_MC_TX_FLOW_CONTROL_ENABLE;
 		} else {
-			printk("no TX flow control");
+			tx_desc = "no ";
 			mac_ctrl_val &= ~IPG_MC_TX_FLOW_CONTROL_ENABLE;
 		}
 
 		if (rxflowcontrol == 1) {
-			printk(", RX flow control.");
+			rx_desc = "";
 			mac_ctrl_val |= IPG_MC_RX_FLOW_CONTROL_ENABLE;
 		} else {
-			printk(", no RX flow control.");
+			rx_desc = "no ";
 			mac_ctrl_val &= ~IPG_MC_RX_FLOW_CONTROL_ENABLE;
 		}
-
-		printk("\n");
 	} else {
-		/* Configure IPG for half duplex operation. */
-		printk(KERN_INFO "%s: setting half duplex, "
-		       "no TX flow control, no RX flow control.\n", dev->name);
-
-		mac_ctrl_val &= ~IPG_MC_DUPLEX_SELECT_FD &
-			~IPG_MC_TX_FLOW_CONTROL_ENABLE &
-			~IPG_MC_RX_FLOW_CONTROL_ENABLE;
+		duplex = "half";
+		tx_desc = "no ";
+		rx_desc = "no ";
+		mac_ctrl_val &= (~IPG_MC_DUPLEX_SELECT_FD &
+				 ~IPG_MC_TX_FLOW_CONTROL_ENABLE &
+				 ~IPG_MC_RX_FLOW_CONTROL_ENABLE);
 	}
+
+	netdev_info(dev, "setting %s duplex, %sTX, %sRX flow control\n",
+		    duplex, tx_desc, rx_desc);
 	ipg_w32(mac_ctrl_val, MAC_CTRL);
+
 	return 0;
 }
 
@@ -784,14 +794,13 @@ static int init_rfdlist(struct net_device *dev)
 			 * A receive buffer was not ready, break the
 			 * RFD list here.
 			 */
-			IPG_DEBUG_MSG("Cannot allocate Rx buffer.\n");
+			IPG_DEBUG_MSG("Cannot allocate Rx buffer\n");
 
 			/* Just in case we cannot allocate a single RFD.
 			 * Should not occur.
 			 */
 			if (i == 0) {
-				printk(KERN_ERR "%s: No memory available"
-					" for RFD list.\n", dev->name);
+				netdev_err(dev, "No memory available for RFD list\n");
 				return -ENOMEM;
 			}
 		}
@@ -838,7 +847,7 @@ static void init_tfdlist(struct net_device *dev)
 	sp->tx_dirty = 0;
 
 	/* Write the location of the TFDList to the IPG. */
-	IPG_DDEBUG_MSG("Starting TFDListPtr = %8.8x\n",
+	IPG_DDEBUG_MSG("Starting TFDListPtr = %08x\n",
 		       (u32) sp->txd_map);
 	ipg_w32((u32) sp->txd_map, TFD_LIST_PTR_0);
 	ipg_w32(0x00000000, TFD_LIST_PTR_1);
@@ -864,7 +873,7 @@ static void ipg_nic_txfree(struct net_device *dev)
 		struct sk_buff *skb = sp->tx_buff[dirty];
 		struct ipg_tx *txfd = sp->txd + dirty;
 
-		IPG_DEBUG_MSG("TFC = %16.16lx\n", (unsigned long) txfd->tfc);
+		IPG_DEBUG_MSG("TFC = %016lx\n", (unsigned long) txfd->tfc);
 
 		/* Look at each TFD's TFC field beginning
 		 * at the last freed TFD up to the current TFD.
@@ -906,10 +915,8 @@ static void ipg_tx_timeout(struct net_device *dev)
 	spin_lock_irq(&sp->lock);
 
 	/* Re-configure after DMA reset. */
-	if (ipg_io_config(dev) < 0) {
-		printk(KERN_INFO "%s: Error during re-configuration.\n",
-		       dev->name);
-	}
+	if (ipg_io_config(dev) < 0)
+		netdev_info(dev, "Error during re-configuration\n");
 
 	init_tfdlist(dev);
 
@@ -938,7 +945,7 @@ static void ipg_nic_txcleanup(struct net_device *dev)
 		 */
 		u32 txstatusdword = ipg_r32(TX_STATUS);
 
-		IPG_DEBUG_MSG("TxStatus = %8.8x\n", txstatusdword);
+		IPG_DEBUG_MSG("TxStatus = %08x\n", txstatusdword);
 
 		/* Check for Transmit errors. Error bits only valid if
 		 * TX_COMPLETE bit in the TXSTATUS register is a 1.
@@ -953,20 +960,20 @@ static void ipg_nic_txcleanup(struct net_device *dev)
 
 		/* Transmit error, increment stat counters. */
 		if (txstatusdword & IPG_TS_TX_ERROR) {
-			IPG_DEBUG_MSG("Transmit error.\n");
+			IPG_DEBUG_MSG("Transmit error\n");
 			sp->stats.tx_errors++;
 		}
 
 		/* Late collision, re-enable transmitter. */
 		if (txstatusdword & IPG_TS_LATE_COLLISION) {
-			IPG_DEBUG_MSG("Late collision on transmit.\n");
+			IPG_DEBUG_MSG("Late collision on transmit\n");
 			ipg_w32((ipg_r32(MAC_CTRL) | IPG_MC_TX_ENABLE) &
 				IPG_MC_RSVD_MASK, MAC_CTRL);
 		}
 
 		/* Maximum collisions, re-enable transmitter. */
 		if (txstatusdword & IPG_TS_TX_MAX_COLL) {
-			IPG_DEBUG_MSG("Maximum collisions on transmit.\n");
+			IPG_DEBUG_MSG("Maximum collisions on transmit\n");
 			ipg_w32((ipg_r32(MAC_CTRL) | IPG_MC_TX_ENABLE) &
 				IPG_MC_RSVD_MASK, MAC_CTRL);
 		}
@@ -975,16 +982,14 @@ static void ipg_nic_txcleanup(struct net_device *dev)
 		 * transmitter.
 		 */
 		if (txstatusdword & IPG_TS_TX_UNDERRUN) {
-			IPG_DEBUG_MSG("Transmitter underrun.\n");
+			IPG_DEBUG_MSG("Transmitter underrun\n");
 			sp->stats.tx_fifo_errors++;
 			ipg_reset(dev, IPG_AC_TX_RESET | IPG_AC_DMA |
 				  IPG_AC_NETWORK | IPG_AC_FIFO);
 
 			/* Re-configure after DMA reset. */
 			if (ipg_io_config(dev) < 0) {
-				printk(KERN_INFO
-				       "%s: Error during re-configuration.\n",
-				       dev->name);
+				netdev_info(dev, "Error during re-configuration\n");
 			}
 			init_tfdlist(dev);
 
@@ -1063,7 +1068,7 @@ static int ipg_nic_rxrestore(struct net_device *dev)
 		 * Linux system).
 		 */
 		if (ipg_get_rxbuff(dev, entry) < 0) {
-			IPG_DEBUG_MSG("Cannot allocate new Rx buffer.\n");
+			IPG_DEBUG_MSG("Cannot allocate new Rx buffer\n");
 
 			break;
 		}
@@ -1134,7 +1139,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
 	     (IPG_RFS_RXFIFOOVERRUN | IPG_RFS_RXRUNTFRAME |
 	      IPG_RFS_RXALIGNMENTERROR | IPG_RFS_RXFCSERROR |
 	      IPG_RFS_RXOVERSIZEDFRAME | IPG_RFS_RXLENGTHERROR))) {
-		IPG_DEBUG_MSG("Rx error, RFS = %16.16lx\n",
+		IPG_DEBUG_MSG("Rx error, RFS = %016lx\n",
 			      (unsigned long) rxfd->rfs);
 
 		/* Increment general receive error statistic. */
@@ -1142,13 +1147,13 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
 
 		/* Increment detailed receive error statistics. */
 		if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
-			IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");
+			IPG_DEBUG_MSG("RX FIFO overrun occurred\n");
 
 			sp->stats.rx_fifo_errors++;
 		}
 
 		if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
-			IPG_DEBUG_MSG("RX runt occurred.\n");
+			IPG_DEBUG_MSG("RX runt occurred\n");
 			sp->stats.rx_length_errors++;
 		}
 
@@ -1157,7 +1162,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
 		 */
 
 		if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
-			IPG_DEBUG_MSG("RX alignment error occurred.\n");
+			IPG_DEBUG_MSG("RX alignment error occurred\n");
 			sp->stats.rx_frame_errors++;
 		}
 
@@ -1404,7 +1409,7 @@ static int ipg_nic_rx(struct net_device *dev)
 		 */
 		if (framelen > sp->rxfrag_size) {
 			IPG_DEBUG_MSG
-			    ("RFS FrameLen > allocated fragment size.\n");
+			    ("RFS FrameLen > allocated fragment size\n");
 
 			framelen = sp->rxfrag_size;
 		}
@@ -1414,7 +1419,7 @@ static int ipg_nic_rx(struct net_device *dev)
 			IPG_RFS_RXALIGNMENTERROR | IPG_RFS_RXFCSERROR |
 			IPG_RFS_RXOVERSIZEDFRAME | IPG_RFS_RXLENGTHERROR)))) {
 
-			IPG_DEBUG_MSG("Rx error, RFS = %16.16lx\n",
+			IPG_DEBUG_MSG("Rx error, RFS = %016lx\n",
 				      (unsigned long int) rxfd->rfs);
 
 			/* Increment general receive error statistic. */
@@ -1422,12 +1427,12 @@ static int ipg_nic_rx(struct net_device *dev)
 
 			/* Increment detailed receive error statistics. */
 			if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
-				IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");
+				IPG_DEBUG_MSG("RX FIFO overrun occurred\n");
 				sp->stats.rx_fifo_errors++;
 			}
 
 			if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
-				IPG_DEBUG_MSG("RX runt occurred.\n");
+				IPG_DEBUG_MSG("RX runt occurred\n");
 				sp->stats.rx_length_errors++;
 			}
 
@@ -1437,7 +1442,7 @@ static int ipg_nic_rx(struct net_device *dev)
 			 */
 
 			if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
-				IPG_DEBUG_MSG("RX alignment error occurred.\n");
+				IPG_DEBUG_MSG("RX alignment error occurred\n");
 				sp->stats.rx_frame_errors++;
 			}
 
@@ -1508,7 +1513,7 @@ static int ipg_nic_rx(struct net_device *dev)
 
 		rxfd = sp->rxd + entry;
 
-		IPG_DEBUG_MSG("Frame requires multiple RFDs.\n");
+		IPG_DEBUG_MSG("Frame requires multiple RFDs\n");
 
 		/* An unexpected event, additional code needed to handle
 		 * properly. So for the time being, just disregard the
@@ -1557,8 +1562,7 @@ static void ipg_reset_after_host_error(struct work_struct *work)
 	init_tfdlist(dev);
 
 	if (ipg_io_config(dev) < 0) {
-		printk(KERN_INFO "%s: Cannot recover from PCI error.\n",
-		       dev->name);
+		netdev_info(dev, "Cannot recover from PCI error\n");
 		schedule_delayed_work(&sp->task, HZ);
 	}
 }
@@ -1586,7 +1590,7 @@ static irqreturn_t ipg_interrupt_handler(int irq, void *dev_inst)
 	 */
 	status = ipg_r16(INT_STATUS_ACK);
 
-	IPG_DEBUG_MSG("IntStatusAck = %4.4x\n", status);
+	IPG_DEBUG_MSG("IntStatusAck = %04x\n", status);
 
 	/* Shared IRQ of remove event. */
 	if (!(status & IPG_IS_RSVD_MASK))
@@ -1599,7 +1603,7 @@ static irqreturn_t ipg_interrupt_handler(int irq, void *dev_inst)
 
 	/* If RFDListEnd interrupt, restore all used RFDs. */
 	if (status & IPG_IS_RFD_LIST_END) {
-		IPG_DEBUG_MSG("RFDListEnd Interrupt.\n");
+		IPG_DEBUG_MSG("RFDListEnd Interrupt\n");
 
 		/* The RFD list end indicates an RFD was encountered
 		 * with a 0 NextPtr, or with an RFDDone bit set to 1
@@ -1661,21 +1665,20 @@ static irqreturn_t ipg_interrupt_handler(int irq, void *dev_inst)
 	/* If LinkEvent interrupt, resolve autonegotiation. */
 	if (status & IPG_IS_LINK_EVENT) {
 		if (ipg_config_autoneg(dev) < 0)
-			printk(KERN_INFO "%s: Auto-negotiation error.\n",
-			       dev->name);
+			netdev_info(dev, "Auto-negotiation error\n");
 	}
 
 	/* If MACCtrlFrame interrupt, do nothing. */
 	if (status & IPG_IS_MAC_CTRL_FRAME)
-		IPG_DEBUG_MSG("MACCtrlFrame interrupt.\n");
+		IPG_DEBUG_MSG("MACCtrlFrame interrupt\n");
 
 	/* If RxComplete interrupt, do nothing. */
 	if (status & IPG_IS_RX_COMPLETE)
-		IPG_DEBUG_MSG("RxComplete interrupt.\n");
+		IPG_DEBUG_MSG("RxComplete interrupt\n");
 
 	/* If RxEarly interrupt, do nothing. */
 	if (status & IPG_IS_RX_EARLY)
-		IPG_DEBUG_MSG("RxEarly interrupt.\n");
+		IPG_DEBUG_MSG("RxEarly interrupt\n");
 
 out_enable:
 	/* Re-enable IPG interrupts. */
@@ -1749,8 +1752,7 @@ static int ipg_nic_open(struct net_device *dev)
 	rc = request_irq(pdev->irq, ipg_interrupt_handler, IRQF_SHARED,
 			 dev->name, dev);
 	if (rc < 0) {
-		printk(KERN_INFO "%s: Error when requesting interrupt.\n",
-		       dev->name);
+		netdev_info(dev, "Error when requesting interrupt\n");
 		goto out;
 	}
 
@@ -1770,8 +1772,7 @@ static int ipg_nic_open(struct net_device *dev)
 
 	rc = init_rfdlist(dev);
 	if (rc < 0) {
-		printk(KERN_INFO "%s: Error during configuration.\n",
-		       dev->name);
+		netdev_info(dev, "Error during configuration\n");
 		goto err_free_tx_2;
 	}
 
@@ -1779,14 +1780,13 @@ static int ipg_nic_open(struct net_device *dev)
 
 	rc = ipg_io_config(dev);
 	if (rc < 0) {
-		printk(KERN_INFO "%s: Error during configuration.\n",
-		       dev->name);
+		netdev_info(dev, "Error during configuration\n");
 		goto err_release_tfdlist_3;
 	}
 
 	/* Resolve autonegotiation. */
 	if (ipg_config_autoneg(dev) < 0)
-		printk(KERN_INFO "%s: Auto-negotiation error.\n", dev->name);
+		netdev_info(dev, "Auto-negotiation error\n");
 
 	/* initialize JUMBO Frame control variable */
 	sp->jumbo.found_start = 0;
@@ -1961,7 +1961,7 @@ static void ipg_set_phy_default_param(unsigned char rev,
 {
 	unsigned short length;
 	unsigned char revision;
-	unsigned short *phy_param;
+	const unsigned short *phy_param;
 	unsigned short address, value;
 
 	phy_param = &DefaultPhyParam[0];
@@ -2201,7 +2201,7 @@ static const struct net_device_ops ipg_netdev_ops = {
 	.ndo_stop		= ipg_nic_stop,
 	.ndo_start_xmit		= ipg_nic_hard_start_xmit,
 	.ndo_get_stats		= ipg_nic_get_stats,
-	.ndo_set_multicast_list = ipg_nic_set_multicast_list,
+	.ndo_set_rx_mode	= ipg_nic_set_multicast_list,
 	.ndo_do_ioctl		= ipg_ioctl,
 	.ndo_tx_timeout 	= ipg_tx_timeout,
 	.ndo_change_mtu 	= ipg_nic_change_mtu,
@@ -2222,7 +2222,7 @@ static int __devinit ipg_probe(struct pci_dev *pdev,
 	if (rc < 0)
 		goto out;
 
-	printk(KERN_INFO "%s: %s\n", pci_name(pdev), ipg_brand_name[i]);
+	pr_info("%s: %s\n", pci_name(pdev), ipg_brand_name[i]);
 
 	pci_set_master(pdev);
 
@@ -2230,8 +2230,7 @@ static int __devinit ipg_probe(struct pci_dev *pdev,
 	if (rc < 0) {
 		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (rc < 0) {
-			printk(KERN_ERR "%s: DMA config failed.\n",
-			       pci_name(pdev));
+			pr_err("%s: DMA config failed\n", pci_name(pdev));
 			goto err_disable_0;
 		}
 	}
@@ -2241,7 +2240,7 @@ static int __devinit ipg_probe(struct pci_dev *pdev,
 	 */
 	dev = alloc_etherdev(sizeof(struct ipg_nic_private));
 	if (!dev) {
-		printk(KERN_ERR "%s: alloc_etherdev failed\n", pci_name(pdev));
+		pr_err("%s: alloc_etherdev failed\n", pci_name(pdev));
 		rc = -ENOMEM;
 		goto err_disable_0;
 	}
@@ -2267,7 +2266,7 @@ static int __devinit ipg_probe(struct pci_dev *pdev,
 
 	ioaddr = pci_iomap(pdev, 1, pci_resource_len(pdev, 1));
 	if (!ioaddr) {
-		printk(KERN_ERR "%s cannot map MMIO\n", pci_name(pdev));
+		pr_err("%s: cannot map MMIO\n", pci_name(pdev));
 		rc = -EIO;
 		goto err_release_regions_2;
 	}
@@ -2289,7 +2288,7 @@ static int __devinit ipg_probe(struct pci_dev *pdev,
 	if (rc < 0)
 		goto err_unmap_3;
 
-	printk(KERN_INFO "Ethernet device registered as: %s\n", dev->name);
+	netdev_info(dev, "Ethernet device registered\n");
 out:
 	return rc;
 
diff --git a/drivers/net/ipg.h b/drivers/net/ethernet/icplus/ipg.h
index 6ce027355fcf..6ce027355fcf 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ethernet/icplus/ipg.h
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
new file mode 100644
index 000000000000..4a98e83812b7
--- /dev/null
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -0,0 +1,221 @@
+#
+# Intel network device configuration
+#
+
+config NET_VENDOR_INTEL
+	bool "Intel devices"
+	default y
+	depends on PCI || PCI_MSI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Intel cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_INTEL
+
+config E100
+	tristate "Intel(R) PRO/100+ support"
+	depends on PCI
+	select MII
+	---help---
+	  This driver supports Intel(R) PRO/100 family of adapters.
+	  To verify that your adapter is supported, find the board ID number
+	  on the adapter. Look for a label that has a barcode and a number
+	  in the format 123456-001 (six digits hyphen three digits).
+
+	  Use the above information and the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  to identify the adapter.
+
+	  For the latest Intel PRO/100 network driver for Linux, see:
+
+	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/e100.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called e100.
+
+config E1000
+	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/e1000.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called e1000.
+
+config E1000E
+	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
+	depends on PCI && (!SPARC32 || BROKEN)
+	select CRC32
+	---help---
+	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
+	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
+	  use the regular e1000 driver For more information on how to
+	  identify your adapter, go to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called e1000e.
+
+config IGB
+	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/e1000.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called igb.
+
+config IGB_DCA
+	bool "Direct Cache Access (DCA) Support"
+	default y
+	depends on IGB && DCA && !(IGB=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
+
+config IGBVF
+	tristate "Intel(R) 82576 Virtual Function Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) 82576 virtual functions.  For more
+	  information on how to identify your adapter, go to the Adapter &
+	  Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/e1000.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called igbvf.
+
+config IXGB
+	tristate "Intel(R) PRO/10GbE support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) PRO/10GbE family of adapters for
+	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
+	  instead. For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/ixgb.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ixgb.
+
+config IXGBE
+	tristate "Intel(R) 10GbE PCI Express adapters support"
+	depends on PCI && INET
+	select MDIO
+	---help---
+	  This driver supports Intel(R) 10GbE PCI Express family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ixgbe.
+
+config IXGBE_DCA
+	bool "Direct Cache Access (DCA) Support"
+	default y
+	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
+
+config IXGBE_DCB
+	bool "Data Center Bridging (DCB) Support"
+	default n
+	depends on IXGBE && DCB
+	---help---
+	  Say Y here if you want to use Data Center Bridging (DCB) in the
+	  driver.
+
+	  If unsure, say N.
+
+config IXGBEVF
+	tristate "Intel(R) 82599 Virtual Function Ethernet support"
+	depends on PCI_MSI
+	---help---
+	  This driver supports Intel(R) 82599 virtual functions.  For more
+	  information on how to identify your adapter, go to the Adapter &
+	  Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/sb/CS-008441.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/ixgbevf.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ixgbevf.  MSI-X interrupt support is required
+	  for this driver to work correctly.
+
+endif # NET_VENDOR_INTEL
diff --git a/drivers/net/ethernet/intel/Makefile b/drivers/net/ethernet/intel/Makefile
new file mode 100644
index 000000000000..c8210e688669
--- /dev/null
+++ b/drivers/net/ethernet/intel/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the Intel network device drivers.
+#
+
+obj-$(CONFIG_E100) += e100.o
+obj-$(CONFIG_E1000) += e1000/
+obj-$(CONFIG_E1000E) += e1000e/
+obj-$(CONFIG_IGB) += igb/
+obj-$(CONFIG_IGBVF) += igbvf/
+obj-$(CONFIG_IXGBE) += ixgbe/
+obj-$(CONFIG_IXGBEVF) += ixgbevf/
+obj-$(CONFIG_IXGB) += ixgb/
diff --git a/drivers/net/e100.c b/drivers/net/ethernet/intel/e100.c
index c1352c60c299..fe87d3eea5ed 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -2738,7 +2738,7 @@ static const struct net_device_ops e100_netdev_ops = {
 	.ndo_stop		= e100_close,
 	.ndo_start_xmit		= e100_xmit_frame,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= e100_set_multicast_list,
+	.ndo_set_rx_mode	= e100_set_multicast_list,
 	.ndo_set_mac_address	= e100_set_mac_address,
 	.ndo_change_mtu		= e100_change_mtu,
 	.ndo_do_ioctl		= e100_do_ioctl,
diff --git a/drivers/net/e1000/Makefile b/drivers/net/ethernet/intel/e1000/Makefile
index 4a6ab1522451..4a6ab1522451 100644
--- a/drivers/net/e1000/Makefile
+++ b/drivers/net/ethernet/intel/e1000/Makefile
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h
index 24f41da8c4be..4ea87b19ac1a 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/ethernet/intel/e1000/e1000.h
@@ -150,6 +150,8 @@ struct e1000_buffer {
 	unsigned long time_stamp;
 	u16 length;
 	u16 next_to_watch;
+	unsigned int segs;
+	unsigned int bytecount;
 	u16 mapped_as_page;
 };
 
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index c5f0f04219f3..5548d464261a 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -838,6 +838,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
+	E1000_WRITE_FLUSH();
 	msleep(10);
 
 	/* Test each interrupt */
@@ -856,6 +857,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 			adapter->test_icr = 0;
 			ew32(IMC, mask);
 			ew32(ICS, mask);
+			E1000_WRITE_FLUSH();
 			msleep(10);
 
 			if (adapter->test_icr & mask) {
@@ -873,6 +875,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		adapter->test_icr = 0;
 		ew32(IMS, mask);
 		ew32(ICS, mask);
+		E1000_WRITE_FLUSH();
 		msleep(10);
 
 		if (!(adapter->test_icr & mask)) {
@@ -890,6 +893,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 			adapter->test_icr = 0;
 			ew32(IMC, ~mask & 0x00007FFF);
 			ew32(ICS, ~mask & 0x00007FFF);
+			E1000_WRITE_FLUSH();
 			msleep(10);
 
 			if (adapter->test_icr) {
@@ -901,6 +905,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
+	E1000_WRITE_FLUSH();
 	msleep(10);
 
 	/* Unhook test interrupt handler */
@@ -1394,6 +1399,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 			if (unlikely(++k == txdr->count)) k = 0;
 		}
 		ew32(TDT, k);
+		E1000_WRITE_FLUSH();
 		msleep(200);
 		time = jiffies; /* set the start time for the receive */
 		good_cnt = 0;
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 1698622af434..8545c7aa93eb 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -446,6 +446,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
 	/* Must reset the PHY before resetting the MAC */
 	if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
 		ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
+		E1000_WRITE_FLUSH();
 		msleep(5);
 	}
 
@@ -3752,6 +3753,7 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
 		/* Clear SK and CS */
 		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
 		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
 		udelay(1);
 	}
 
@@ -3824,6 +3826,7 @@ static void e1000_release_eeprom(struct e1000_hw *hw)
 		eecd &= ~E1000_EECD_SK;	/* Lower SCK */
 
 		ew32(EECD, eecd);
+		E1000_WRITE_FLUSH();
 
 		udelay(hw->eeprom.delay_usec);
 	} else if (hw->eeprom.type == e1000_eeprom_microwire) {
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/ethernet/intel/e1000/e1000_hw.h
index 5c9a8403668b..5c9a8403668b 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.h
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index f97afda941d7..4a32c15524c9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -1080,6 +1080,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	netdev->vlan_features |= NETIF_F_HW_CSUM;
 	netdev->vlan_features |= NETIF_F_SG;
 
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
 	adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
 
 	/* initialize eeprom parameters */
@@ -2846,7 +2848,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 	struct e1000_buffer *buffer_info;
 	unsigned int len = skb_headlen(skb);
 	unsigned int offset = 0, size, count = 0, i;
-	unsigned int f;
+	unsigned int f, bytecount, segs;
 
 	i = tx_ring->next_to_use;
 
@@ -2947,7 +2949,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 		}
 	}
 
+	segs = skb_shinfo(skb)->gso_segs ?: 1;
+	/* multiply data chunks by size of headers */
+	bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
+
 	tx_ring->buffer_info[i].skb = skb;
+	tx_ring->buffer_info[i].segs = segs;
+	tx_ring->buffer_info[i].bytecount = bytecount;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
 	return count;
@@ -3621,14 +3629,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			cleaned = (i == eop);
 
 			if (cleaned) {
-				struct sk_buff *skb = buffer_info->skb;
-				unsigned int segs, bytecount;
-				segs = skb_shinfo(skb)->gso_segs ?: 1;
-				/* multiply data chunks by size of headers */
-				bytecount = ((segs - 1) * skb_headlen(skb)) +
-				            skb->len;
-				total_tx_packets += segs;
-				total_tx_bytes += bytecount;
+				total_tx_packets += buffer_info->segs;
+				total_tx_bytes += buffer_info->bytecount;
 			}
 			e1000_unmap_and_free_tx_resource(adapter, buffer_info);
 			tx_desc->upper.data = 0;
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/ethernet/intel/e1000/e1000_osdep.h
index 33e7c45a4fe4..33e7c45a4fe4 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/ethernet/intel/e1000/e1000_osdep.h
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/ethernet/intel/e1000/e1000_param.c
index 1301eba8b57a..1301eba8b57a 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_param.c
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index c0ecb2d9fdb7..b7544336cef4 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -1313,6 +1313,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
 	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
 	               E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
 	ew32(KMRNCTRLSTA, kmrnctrlsta);
+	e1e_flush();
 
 	udelay(2);
 
@@ -1347,6 +1348,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
 	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
 	               E1000_KMRNCTRLSTA_OFFSET) | data;
 	ew32(KMRNCTRLSTA, kmrnctrlsta);
+	e1e_flush();
 
 	udelay(2);
 
@@ -1496,7 +1498,6 @@ struct e1000_info e1000_es2_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_RX_NEEDS_RESTART /* errata */
 				  | FLAG_TARC_SET_BIT_ZERO /* errata */
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 480f2592f8a5..2d4dc53a4fb8 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -2019,7 +2019,6 @@ struct e1000_info e1000_82571_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_RESET_OVERWRITES_LAA /* errata */
@@ -2041,7 +2040,6 @@ struct e1000_info e1000_82572_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_TARC_SPEED_MODE_BIT, /* errata */
 	.flags2			= FLAG2_DISABLE_ASPM_L1 /* errata 13 */
@@ -2059,7 +2057,6 @@ struct e1000_info e1000_82573_info = {
 	.flags			= FLAG_HAS_HW_VLAN_FILTER
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_SWSM_ON_LOAD,
@@ -2080,12 +2077,12 @@ struct e1000_info e1000_82574_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.flags2			  = FLAG2_CHECK_PHY_HANG
-				  | FLAG2_DISABLE_ASPM_L0S,
+				  | FLAG2_DISABLE_ASPM_L0S
+				  | FLAG2_NO_DISABLE_RX,
 	.pba			= 32,
 	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
@@ -2099,12 +2096,12 @@ struct e1000_info e1000_82583_info = {
 	.flags			= FLAG_HAS_HW_VLAN_FILTER
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
-	.flags2			= FLAG2_DISABLE_ASPM_L0S,
+	.flags2			= FLAG2_DISABLE_ASPM_L0S
+				  | FLAG2_NO_DISABLE_RX,
 	.pba			= 32,
 	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
diff --git a/drivers/net/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile
index 28519acacd2d..948c05db5d68 100644
--- a/drivers/net/e1000e/Makefile
+++ b/drivers/net/ethernet/intel/e1000e/Makefile
@@ -32,6 +32,6 @@
 
 obj-$(CONFIG_E1000E) += e1000e.o
 
-e1000e-objs := 82571.o ich8lan.o es2lan.o \
+e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
 	       lib.o phy.o param.o ethtool.o netdev.o
 
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index c516a7440bec..c516a7440bec 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 638d175792cf..1b15d1ff583c 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -155,6 +155,9 @@ struct e1000_info;
 #define HV_M_STATUS_SPEED_1000            0x0200
 #define HV_M_STATUS_LINK_UP               0x0040
 
+#define E1000_ICH_FWSM_PCIM2PCI		0x01000000 /* ME PCIm-to-PCI active */
+#define E1000_ICH_FWSM_PCIM2PCI_COUNT	2000
+
 /* Time to wait before putting the device into D3 if there's no link (in ms). */
 #define LINK_TIMEOUT		100
 
@@ -437,12 +440,11 @@ struct e1000_info {
 #define FLAG_LSC_GIG_SPEED_DROP           (1 << 25)
 #define FLAG_SMART_POWER_DOWN             (1 << 26)
 #define FLAG_MSI_ENABLED                  (1 << 27)
-#define FLAG_RX_CSUM_ENABLED              (1 << 28)
+/* reserved (1 << 28) */
 #define FLAG_TSO_FORCE                    (1 << 29)
 #define FLAG_RX_RESTART_NOW               (1 << 30)
 #define FLAG_MSI_TEST_FAILED              (1 << 31)
 
-/* CRC Stripping defines */
 #define FLAG2_CRC_STRIPPING               (1 << 0)
 #define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
 #define FLAG2_IS_DISCARDING               (1 << 2)
@@ -453,11 +455,14 @@ struct e1000_info {
 #define FLAG2_DISABLE_ASPM_L0S            (1 << 7)
 #define FLAG2_DISABLE_AIM                 (1 << 8)
 #define FLAG2_CHECK_PHY_HANG              (1 << 9)
+#define FLAG2_NO_DISABLE_RX               (1 << 10)
+#define FLAG2_PCIM2PCI_ARBITER_WA         (1 << 11)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
+#define E1000_RX_DESC_EXT(R, i)	    \
+	(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
 #define E1000_GET_DESC(R, i, type)	(&(((struct type *)((R).desc))[i]))
-#define E1000_RX_DESC(R, i)		E1000_GET_DESC(R, i, e1000_rx_desc)
 #define E1000_TX_DESC(R, i)		E1000_GET_DESC(R, i, e1000_tx_desc)
 #define E1000_CONTEXT_DESC(R, i)	E1000_GET_DESC(R, i, e1000_context_desc)
 
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index cb1a3623253e..d96d0b0e08cf 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -28,8 +28,8 @@
 
 /* ethtool support for e1000 */
 
-#include <linux/interrupt.h>
 #include <linux/netdevice.h>
+#include <linux/interrupt.h>
 #include <linux/ethtool.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
@@ -367,59 +367,6 @@ out:
 	return retval;
 }
 
-static u32 e1000_get_rx_csum(struct net_device *netdev)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-	return adapter->flags & FLAG_RX_CSUM_ENABLED;
-}
-
-static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
-	if (data)
-		adapter->flags |= FLAG_RX_CSUM_ENABLED;
-	else
-		adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
-
-	if (netif_running(netdev))
-		e1000e_reinit_locked(adapter);
-	else
-		e1000e_reset(adapter);
-	return 0;
-}
-
-static u32 e1000_get_tx_csum(struct net_device *netdev)
-{
-	return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
-static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
-{
-	if (data)
-		netdev->features |= NETIF_F_HW_CSUM;
-	else
-		netdev->features &= ~NETIF_F_HW_CSUM;
-
-	return 0;
-}
-
-static int e1000_set_tso(struct net_device *netdev, u32 data)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
-	if (data) {
-		netdev->features |= NETIF_F_TSO;
-		netdev->features |= NETIF_F_TSO6;
-	} else {
-		netdev->features &= ~NETIF_F_TSO;
-		netdev->features &= ~NETIF_F_TSO6;
-	}
-
-	adapter->flags |= FLAG_TSO_FORCE;
-	return 0;
-}
-
 static u32 e1000_get_msglevel(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -964,6 +911,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
+	e1e_flush();
 	usleep_range(10000, 20000);
 
 	/* Test each interrupt */
@@ -996,6 +944,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 			adapter->test_icr = 0;
 			ew32(IMC, mask);
 			ew32(ICS, mask);
+			e1e_flush();
 			usleep_range(10000, 20000);
 
 			if (adapter->test_icr & mask) {
@@ -1014,6 +963,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		adapter->test_icr = 0;
 		ew32(IMS, mask);
 		ew32(ICS, mask);
+		e1e_flush();
 		usleep_range(10000, 20000);
 
 		if (!(adapter->test_icr & mask)) {
@@ -1032,6 +982,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 			adapter->test_icr = 0;
 			ew32(IMC, ~mask & 0x00007FFF);
 			ew32(ICS, ~mask & 0x00007FFF);
+			e1e_flush();
 			usleep_range(10000, 20000);
 
 			if (adapter->test_icr) {
@@ -1043,6 +994,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
+	e1e_flush();
 	usleep_range(10000, 20000);
 
 	/* Unhook test interrupt handler */
@@ -1190,7 +1142,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 		goto err_nomem;
 	}
 
-	rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
+	rx_ring->size = rx_ring->count * sizeof(union e1000_rx_desc_extended);
 	rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
 					   &rx_ring->dma, GFP_KERNEL);
 	if (!rx_ring->desc) {
@@ -1201,7 +1153,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	rx_ring->next_to_clean = 0;
 
 	rctl = er32(RCTL);
-	ew32(RCTL, rctl & ~E1000_RCTL_EN);
+	if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+		ew32(RCTL, rctl & ~E1000_RCTL_EN);
 	ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF));
 	ew32(RDBAH, ((u64) rx_ring->dma >> 32));
 	ew32(RDLEN, rx_ring->size);
@@ -1215,7 +1168,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	ew32(RCTL, rctl);
 
 	for (i = 0; i < rx_ring->count; i++) {
-		struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
+		union e1000_rx_desc_extended *rx_desc;
 		struct sk_buff *skb;
 
 		skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
@@ -1233,8 +1186,9 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 			ret_val = 8;
 			goto err_nomem;
 		}
-		rx_desc->buffer_addr =
-			cpu_to_le64(rx_ring->buffer_info[i].dma);
+		rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+		rx_desc->read.buffer_addr =
+		    cpu_to_le64(rx_ring->buffer_info[i].dma);
 		memset(skb->data, 0x00, skb->len);
 	}
 
@@ -1276,6 +1230,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
 
 		ew32(CTRL, ctrl_reg);
+		e1e_flush();
 		udelay(500);
 
 		return 0;
@@ -1418,6 +1373,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
 	 */
 #define E1000_SERDES_LB_ON 0x410
 	ew32(SCTL, E1000_SERDES_LB_ON);
+	e1e_flush();
 	usleep_range(10000, 20000);
 
 	return 0;
@@ -1513,6 +1469,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 		    hw->phy.media_type == e1000_media_type_internal_serdes) {
 #define E1000_SERDES_LB_OFF 0x400
 			ew32(SCTL, E1000_SERDES_LB_OFF);
+			e1e_flush();
 			usleep_range(10000, 20000);
 			break;
 		}
@@ -1592,6 +1549,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 				k = 0;
 		}
 		ew32(TDT, k);
+		e1e_flush();
 		msleep(200);
 		time = jiffies; /* set the start time for the receive */
 		good_cnt = 0;
@@ -2003,31 +1961,6 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
 	}
 }
 
-static int e1000e_set_flags(struct net_device *netdev, u32 data)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-	bool need_reset = false;
-	int rc;
-
-	need_reset = (data & ETH_FLAG_RXVLAN) !=
-		     (netdev->features & NETIF_F_HW_VLAN_RX);
-
-	rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
-				  ETH_FLAG_TXVLAN);
-
-	if (rc)
-		return rc;
-
-	if (need_reset) {
-		if (netif_running(netdev))
-			e1000e_reinit_locked(adapter);
-		else
-			e1000e_reset(adapter);
-	}
-
-	return 0;
-}
-
 static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
@@ -2047,14 +1980,6 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.set_ringparam		= e1000_set_ringparam,
 	.get_pauseparam		= e1000_get_pauseparam,
 	.set_pauseparam		= e1000_set_pauseparam,
-	.get_rx_csum		= e1000_get_rx_csum,
-	.set_rx_csum		= e1000_set_rx_csum,
-	.get_tx_csum		= e1000_get_tx_csum,
-	.set_tx_csum		= e1000_set_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
-	.get_tso		= ethtool_op_get_tso,
-	.set_tso		= e1000_set_tso,
 	.self_test		= e1000_diag_test,
 	.get_strings		= e1000_get_strings,
 	.set_phys_id		= e1000_set_phys_id,
@@ -2062,8 +1987,6 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_sset_count		= e1000e_get_sset_count,
 	.get_coalesce		= e1000_get_coalesce,
 	.set_coalesce		= e1000_set_coalesce,
-	.get_flags		= ethtool_op_get_flags,
-	.set_flags		= e1000e_set_flags,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 29670397079b..29670397079b 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index c1752124f3cd..3fc3acce9950 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -137,8 +137,9 @@
 #define HV_PM_CTRL		PHY_REG(770, 17)
 
 /* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL			PHY_REG(772, 20)
-#define I82579_LPI_CTRL_ENABLE_MASK	0x6000
+#define I82579_LPI_CTRL				PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK		0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT	0x80
 
 /* EMI Registers */
 #define I82579_EMI_ADDR         0x10
@@ -163,6 +164,11 @@
 #define HV_KMRN_MODE_CTRL      PHY_REG(769, 16)
 #define HV_KMRN_MDIO_SLOW      0x0400
 
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA                  PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK    0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT   12
+
 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
 union ich8_hws_flash_status {
@@ -283,6 +289,7 @@ static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
 	ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
 	ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
 	ew32(CTRL, ctrl);
+	e1e_flush();
 	udelay(10);
 	ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
 	ew32(CTRL, ctrl);
@@ -656,6 +663,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	struct e1000_mac_info *mac = &hw->mac;
 	s32 ret_val;
 	bool link;
+	u16 phy_reg;
 
 	/*
 	 * We only want to go out to the PHY registers to see if Auto-Neg
@@ -688,16 +696,35 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 
 	mac->get_link_status = false;
 
-	if (hw->phy.type == e1000_phy_82578) {
-		ret_val = e1000_link_stall_workaround_hv(hw);
-		if (ret_val)
-			goto out;
-	}
-
-	if (hw->mac.type == e1000_pch2lan) {
+	switch (hw->mac.type) {
+	case e1000_pch2lan:
 		ret_val = e1000_k1_workaround_lv(hw);
 		if (ret_val)
 			goto out;
+		/* fall-thru */
+	case e1000_pchlan:
+		if (hw->phy.type == e1000_phy_82578) {
+			ret_val = e1000_link_stall_workaround_hv(hw);
+			if (ret_val)
+				goto out;
+		}
+
+		/*
+		 * Workaround for PCHx parts in half-duplex:
+		 * Set the number of preambles removed from the packet
+		 * when it is passed from the PHY to the MAC to prevent
+		 * the MAC from misinterpreting the packet type.
+		 */
+		e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg);
+		phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK;
+
+		if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD)
+			phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT);
+
+		e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg);
+		break;
+	default:
+		break;
 	}
 
 	/*
@@ -787,6 +814,11 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	    (adapter->hw.phy.type == e1000_phy_igp_3))
 		adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
 
+	/* Enable workaround for 82579 w/ ME enabled */
+	if ((adapter->hw.mac.type == e1000_pch2lan) &&
+	    (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+		adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
+
 	/* Disable EEE by default until IEEE802.3az spec is finalized */
 	if (adapter->flags2 & FLAG2_HAS_EEE)
 		adapter->hw.dev_spec.ich8lan.eee_disable = true;
@@ -1230,9 +1262,11 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	ew32(CTRL, reg);
 
 	ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
+	e1e_flush();
 	udelay(20);
 	ew32(CTRL, ctrl_reg);
 	ew32(CTRL_EXT, ctrl_ext);
+	e1e_flush();
 	udelay(20);
 
 out:
@@ -1352,7 +1386,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 
 		/* Preamble tuning for SSC */
-		ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
+		ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204);
 		if (ret_val)
 			return ret_val;
 	}
@@ -1642,6 +1676,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
 	s32 ret_val = 0;
 	u16 status_reg = 0;
 	u32 mac_reg;
+	u16 phy_reg;
 
 	if (hw->mac.type != e1000_pch2lan)
 		goto out;
@@ -1656,12 +1691,19 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
 		mac_reg = er32(FEXTNVM4);
 		mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
 
-		if (status_reg & HV_M_STATUS_SPEED_1000)
+		ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+		if (ret_val)
+			goto out;
+
+		if (status_reg & HV_M_STATUS_SPEED_1000) {
 			mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
-		else
+			phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+		} else {
 			mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
-
+			phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+		}
 		ew32(FEXTNVM4, mac_reg);
+		ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
 	}
 
 out:
@@ -2134,8 +2176,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
 	ret_val = 0;
 	for (i = 0; i < words; i++) {
-		if ((dev_spec->shadow_ram) &&
-		    (dev_spec->shadow_ram[offset+i].modified)) {
+		if (dev_spec->shadow_ram[offset+i].modified) {
 			data[i] = dev_spec->shadow_ram[offset+i].value;
 		} else {
 			ret_val = e1000_read_flash_word_ich8lan(hw,
@@ -3090,6 +3131,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ret_val = e1000_acquire_swflag_ich8lan(hw);
 	e_dbg("Issuing a global reset to ich8lan\n");
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
+	/* cannot issue a flush here because it hangs the hardware */
 	msleep(20);
 
 	if (!ret_val)
@@ -4016,7 +4058,6 @@ struct e1000_info e1000_ich8_info = {
 	.mac			= e1000_ich8lan,
 	.flags			= FLAG_HAS_WOL
 				  | FLAG_IS_ICH
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH
@@ -4034,7 +4075,6 @@ struct e1000_info e1000_ich9_info = {
 	.flags			= FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_IS_ICH
 				  | FLAG_HAS_WOL
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_ERT
@@ -4053,7 +4093,6 @@ struct e1000_info e1000_ich10_info = {
 	.flags			= FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_IS_ICH
 				  | FLAG_HAS_WOL
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_ERT
@@ -4071,7 +4110,6 @@ struct e1000_info e1000_pch_info = {
 	.mac			= e1000_pchlan,
 	.flags			= FLAG_IS_ICH
 				  | FLAG_HAS_WOL
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH
@@ -4091,7 +4129,6 @@ struct e1000_info e1000_pch2_info = {
 	.mac			= e1000_pch2lan,
 	.flags			= FLAG_IS_ICH
 				  | FLAG_HAS_WOL
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/ethernet/intel/e1000e/lib.c
index 65580b405942..0893ab107adf 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/ethernet/intel/e1000e/lib.c
@@ -190,7 +190,8 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
 	/* Check for LOM (vs. NIC) or one of two valid mezzanine cards */
 	if (!((nvm_data & NVM_COMPAT_LOM) ||
 	      (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) ||
-	      (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)))
+	      (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) ||
+	      (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES)))
 		goto out;
 
 	ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
@@ -200,10 +201,10 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
 		goto out;
 	}
 
-	if (nvm_alt_mac_addr_offset == 0xFFFF) {
+	if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
+	    (nvm_alt_mac_addr_offset == 0x0000))
 		/* There is no Alternate MAC Address */
 		goto out;
-	}
 
 	if (hw->bus.func == E1000_FUNC_1)
 		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
@@ -1986,6 +1987,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
 		/* Clear SK and CS */
 		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
 		ew32(EECD, eecd);
+		e1e_flush();
 		udelay(1);
 
 		/*
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 4353ad56cf16..4f669995623f 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -31,12 +31,12 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
+#include <linux/interrupt.h>
 #include <linux/tcp.h>
 #include <linux/ipv6.h>
 #include <linux/slab.h>
@@ -56,7 +56,7 @@
 
 #define DRV_EXTRAVERSION "-k"
 
-#define DRV_VERSION "1.3.16" DRV_EXTRAVERSION
+#define DRV_VERSION "1.5.1" DRV_EXTRAVERSION
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -192,7 +192,7 @@ static void e1000e_dump(struct e1000_adapter *adapter)
 	struct e1000_buffer *buffer_info;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
 	union e1000_rx_desc_packet_split *rx_desc_ps;
-	struct e1000_rx_desc *rx_desc;
+	union e1000_rx_desc_extended *rx_desc;
 	struct my_u1 {
 		u64 a;
 		u64 b;
@@ -399,41 +399,70 @@ rx_ring_summary:
 		break;
 	default:
 	case 0:
-		/* Legacy Receive Descriptor Format
+		/* Extended Receive Descriptor (Read) Format
+		 *
+		 *   +-----------------------------------------------------+
+		 * 0 |                Buffer Address [63:0]                |
+		 *   +-----------------------------------------------------+
+		 * 8 |                      Reserved                       |
+		 *   +-----------------------------------------------------+
+		 */
+		printk(KERN_INFO "R  [desc]      [buf addr 63:0 ] "
+		       "[reserved 63:0 ] [bi->dma       ] "
+		       "[bi->skb] <-- Ext (Read) format\n");
+		/* Extended Receive Descriptor (Write-Back) Format
 		 *
-		 * +-----------------------------------------------------+
-		 * |                Buffer Address [63:0]                |
-		 * +-----------------------------------------------------+
-		 * | VLAN Tag | Errors | Status 0 | Packet csum | Length |
-		 * +-----------------------------------------------------+
-		 * 63       48 47    40 39      32 31         16 15      0
+		 *   63       48 47    32 31    24 23            4 3        0
+		 *   +------------------------------------------------------+
+		 *   |     RSS Hash      |        |               |         |
+		 * 0 +-------------------+  Rsvd  |   Reserved    | MRQ RSS |
+		 *   | Packet   | IP     |        |               |  Type   |
+		 *   | Checksum | Ident  |        |               |         |
+		 *   +------------------------------------------------------+
+		 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+		 *   +------------------------------------------------------+
+		 *   63       48 47    32 31            20 19               0
 		 */
-		printk(KERN_INFO "Rl[desc]     [address 63:0  ] "
-		       "[vl er S cks ln] [bi->dma       ] [bi->skb] "
-		       "<-- Legacy format\n");
-		for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) {
-			rx_desc = E1000_RX_DESC(*rx_ring, i);
+		printk(KERN_INFO "RWB[desc]      [cs ipid    mrq] "
+		       "[vt   ln xe  xs] "
+		       "[bi->skb] <-- Ext (Write-Back) format\n");
+
+		for (i = 0; i < rx_ring->count; i++) {
 			buffer_info = &rx_ring->buffer_info[i];
-			u0 = (struct my_u0 *)rx_desc;
-			printk(KERN_INFO "Rl[0x%03X]    %016llX %016llX "
-			       "%016llX %p", i,
-			       (unsigned long long)le64_to_cpu(u0->a),
-			       (unsigned long long)le64_to_cpu(u0->b),
-			       (unsigned long long)buffer_info->dma,
-			       buffer_info->skb);
+			rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+			u1 = (struct my_u1 *)rx_desc;
+			staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+			if (staterr & E1000_RXD_STAT_DD) {
+				/* Descriptor Done */
+				printk(KERN_INFO "RWB[0x%03X]     %016llX "
+				       "%016llX ---------------- %p", i,
+				       (unsigned long long)le64_to_cpu(u1->a),
+				       (unsigned long long)le64_to_cpu(u1->b),
+				       buffer_info->skb);
+			} else {
+				printk(KERN_INFO "R  [0x%03X]     %016llX "
+				       "%016llX %016llX %p", i,
+				       (unsigned long long)le64_to_cpu(u1->a),
+				       (unsigned long long)le64_to_cpu(u1->b),
+				       (unsigned long long)buffer_info->dma,
+				       buffer_info->skb);
+
+				if (netif_msg_pktdata(adapter))
+					print_hex_dump(KERN_INFO, "",
+						       DUMP_PREFIX_ADDRESS, 16,
+						       1,
+						       phys_to_virt
+						       (buffer_info->dma),
+						       adapter->rx_buffer_len,
+						       true);
+			}
+
 			if (i == rx_ring->next_to_use)
 				printk(KERN_CONT " NTU\n");
 			else if (i == rx_ring->next_to_clean)
 				printk(KERN_CONT " NTC\n");
 			else
 				printk(KERN_CONT "\n");
-
-			if (netif_msg_pktdata(adapter))
-				print_hex_dump(KERN_INFO, "",
-					       DUMP_PREFIX_ADDRESS,
-					       16, 1,
-					       phys_to_virt(buffer_info->dma),
-					       adapter->rx_buffer_len, true);
 		}
 	}
 
@@ -519,7 +548,64 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 }
 
 /**
- * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
+ * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa()
+ * @hw: pointer to the HW structure
+ * @tail: address of tail descriptor register
+ * @i: value to write to tail descriptor register
+ *
+ * When updating the tail register, the ME could be accessing Host CSR
+ * registers at the same time.  Normally, this is handled in h/w by an
+ * arbiter but on some parts there is a bug that acknowledges Host accesses
+ * later than it should which could result in the descriptor register to
+ * have an incorrect value.  Workaround this by checking the FWSM register
+ * which has bit 24 set while ME is accessing Host CSR registers, wait
+ * if it is set and try again a number of times.
+ **/
+static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail,
+					unsigned int i)
+{
+	unsigned int j = 0;
+
+	while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) &&
+	       (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI))
+		udelay(50);
+
+	writel(i, tail);
+
+	if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail)))
+		return E1000_ERR_SWFW_SYNC;
+
+	return 0;
+}
+
+static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i)
+{
+	u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail);
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (e1000e_update_tail_wa(hw, tail, i)) {
+		u32 rctl = er32(RCTL);
+		ew32(RCTL, rctl & ~E1000_RCTL_EN);
+		e_err("ME firmware caused invalid RDT - resetting\n");
+		schedule_work(&adapter->reset_task);
+	}
+}
+
+static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i)
+{
+	u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail);
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (e1000e_update_tail_wa(hw, tail, i)) {
+		u32 tctl = er32(TCTL);
+		ew32(TCTL, tctl & ~E1000_TCTL_EN);
+		e_err("ME firmware caused invalid TDT - resetting\n");
+		schedule_work(&adapter->reset_task);
+	}
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers
  * @adapter: address of board private structure
  **/
 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
@@ -528,7 +614,7 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
-	struct e1000_rx_desc *rx_desc;
+	union e1000_rx_desc_extended *rx_desc;
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
@@ -562,8 +648,8 @@ map_skb:
 			break;
 		}
 
-		rx_desc = E1000_RX_DESC(*rx_ring, i);
-		rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+		rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+		rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
 
 		if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
 			/*
@@ -573,7 +659,10 @@ map_skb:
 			 * such as IA-64).
 			 */
 			wmb();
-			writel(i, adapter->hw.hw_addr + rx_ring->tail);
+			if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+				e1000e_update_rdt_wa(adapter, i);
+			else
+				writel(i, adapter->hw.hw_addr + rx_ring->tail);
 		}
 		i++;
 		if (i == rx_ring->count)
@@ -673,7 +762,11 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 			 * such as IA-64).
 			 */
 			wmb();
-			writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
+			if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+				e1000e_update_rdt_wa(adapter, i << 1);
+			else
+				writel(i << 1,
+				       adapter->hw.hw_addr + rx_ring->tail);
 		}
 
 		i++;
@@ -697,7 +790,7 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
-	struct e1000_rx_desc *rx_desc;
+	union e1000_rx_desc_extended *rx_desc;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
@@ -738,8 +831,8 @@ check_page:
 			                                PAGE_SIZE,
 							DMA_FROM_DEVICE);
 
-		rx_desc = E1000_RX_DESC(*rx_ring, i);
-		rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+		rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+		rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
 
 		if (unlikely(++i == rx_ring->count))
 			i = 0;
@@ -756,7 +849,10 @@ check_page:
 		 * applicable for weak-ordered memory model archs,
 		 * such as IA-64). */
 		wmb();
-		writel(i, adapter->hw.hw_addr + rx_ring->tail);
+		if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+			e1000e_update_rdt_wa(adapter, i);
+		else
+			writel(i, adapter->hw.hw_addr + rx_ring->tail);
 	}
 }
 
@@ -774,28 +870,27 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
-	struct e1000_rx_desc *rx_desc, *next_rxd;
+	union e1000_rx_desc_extended *rx_desc, *next_rxd;
 	struct e1000_buffer *buffer_info, *next_buffer;
-	u32 length;
+	u32 length, staterr;
 	unsigned int i;
 	int cleaned_count = 0;
 	bool cleaned = 0;
 	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 
 	i = rx_ring->next_to_clean;
-	rx_desc = E1000_RX_DESC(*rx_ring, i);
+	rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 	buffer_info = &rx_ring->buffer_info[i];
 
-	while (rx_desc->status & E1000_RXD_STAT_DD) {
+	while (staterr & E1000_RXD_STAT_DD) {
 		struct sk_buff *skb;
-		u8 status;
 
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
 		rmb();	/* read descriptor and rx_buffer_info after status DD */
 
-		status = rx_desc->status;
 		skb = buffer_info->skb;
 		buffer_info->skb = NULL;
 
@@ -804,7 +899,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		i++;
 		if (i == rx_ring->count)
 			i = 0;
-		next_rxd = E1000_RX_DESC(*rx_ring, i);
+		next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
 		prefetch(next_rxd);
 
 		next_buffer = &rx_ring->buffer_info[i];
@@ -817,7 +912,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 				 DMA_FROM_DEVICE);
 		buffer_info->dma = 0;
 
-		length = le16_to_cpu(rx_desc->length);
+		length = le16_to_cpu(rx_desc->wb.upper.length);
 
 		/*
 		 * !EOP means multiple descriptors were used to store a single
@@ -826,7 +921,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * next frame that _does_ have the EOP bit set, as it is by
 		 * definition only a frame fragment
 		 */
-		if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+		if (unlikely(!(staterr & E1000_RXD_STAT_EOP)))
 			adapter->flags2 |= FLAG2_IS_DISCARDING;
 
 		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
@@ -834,12 +929,12 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			e_dbg("Receive packet consumed multiple buffers\n");
 			/* recycle */
 			buffer_info->skb = skb;
-			if (status & E1000_RXD_STAT_EOP)
+			if (staterr & E1000_RXD_STAT_EOP)
 				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 			goto next_desc;
 		}
 
-		if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) {
+		if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
@@ -877,15 +972,15 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		skb_put(skb, length);
 
 		/* Receive Checksum Offload */
-		e1000_rx_checksum(adapter,
-				  (u32)(status) |
-				  ((u32)(rx_desc->errors) << 24),
-				  le16_to_cpu(rx_desc->csum), skb);
+		e1000_rx_checksum(adapter, staterr,
+				  le16_to_cpu(rx_desc->wb.lower.hi_dword.
+					      csum_ip.csum), skb);
 
-		e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
+		e1000_receive_skb(adapter, netdev, skb, staterr,
+				  rx_desc->wb.upper.vlan);
 
 next_desc:
-		rx_desc->status = 0;
+		rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
 
 		/* return some buffers to hardware, one at a time is too slow */
 		if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
@@ -897,6 +992,8 @@ next_desc:
 		/* use prefetched values */
 		rx_desc = next_rxd;
 		buffer_info = next_buffer;
+
+		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 	}
 	rx_ring->next_to_clean = i;
 
@@ -1280,35 +1377,34 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
-	struct e1000_rx_desc *rx_desc, *next_rxd;
+	union e1000_rx_desc_extended *rx_desc, *next_rxd;
 	struct e1000_buffer *buffer_info, *next_buffer;
-	u32 length;
+	u32 length, staterr;
 	unsigned int i;
 	int cleaned_count = 0;
 	bool cleaned = false;
 	unsigned int total_rx_bytes=0, total_rx_packets=0;
 
 	i = rx_ring->next_to_clean;
-	rx_desc = E1000_RX_DESC(*rx_ring, i);
+	rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 	buffer_info = &rx_ring->buffer_info[i];
 
-	while (rx_desc->status & E1000_RXD_STAT_DD) {
+	while (staterr & E1000_RXD_STAT_DD) {
 		struct sk_buff *skb;
-		u8 status;
 
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
 		rmb();	/* read descriptor and rx_buffer_info after status DD */
 
-		status = rx_desc->status;
 		skb = buffer_info->skb;
 		buffer_info->skb = NULL;
 
 		++i;
 		if (i == rx_ring->count)
 			i = 0;
-		next_rxd = E1000_RX_DESC(*rx_ring, i);
+		next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
 		prefetch(next_rxd);
 
 		next_buffer = &rx_ring->buffer_info[i];
@@ -1319,23 +1415,22 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 			       DMA_FROM_DEVICE);
 		buffer_info->dma = 0;
 
-		length = le16_to_cpu(rx_desc->length);
+		length = le16_to_cpu(rx_desc->wb.upper.length);
 
 		/* errors is only valid for DD + EOP descriptors */
-		if (unlikely((status & E1000_RXD_STAT_EOP) &&
-		    (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
-				/* recycle both page and skb */
-				buffer_info->skb = skb;
-				/* an error means any chain goes out the window
-				 * too */
-				if (rx_ring->rx_skb_top)
-					dev_kfree_skb_irq(rx_ring->rx_skb_top);
-				rx_ring->rx_skb_top = NULL;
-				goto next_desc;
+		if (unlikely((staterr & E1000_RXD_STAT_EOP) &&
+			     (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK))) {
+			/* recycle both page and skb */
+			buffer_info->skb = skb;
+			/* an error means any chain goes out the window too */
+			if (rx_ring->rx_skb_top)
+				dev_kfree_skb_irq(rx_ring->rx_skb_top);
+			rx_ring->rx_skb_top = NULL;
+			goto next_desc;
 		}
 
 #define rxtop (rx_ring->rx_skb_top)
-		if (!(status & E1000_RXD_STAT_EOP)) {
+		if (!(staterr & E1000_RXD_STAT_EOP)) {
 			/* this descriptor is only the beginning (or middle) */
 			if (!rxtop) {
 				/* this is the beginning of a chain */
@@ -1390,10 +1485,9 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 		}
 
 		/* Receive Checksum Offload XXX recompute due to CRC strip? */
-		e1000_rx_checksum(adapter,
-		                  (u32)(status) |
-		                  ((u32)(rx_desc->errors) << 24),
-		                  le16_to_cpu(rx_desc->csum), skb);
+		e1000_rx_checksum(adapter, staterr,
+				  le16_to_cpu(rx_desc->wb.lower.hi_dword.
+					      csum_ip.csum), skb);
 
 		/* probably a little skewed due to removing CRC */
 		total_rx_bytes += skb->len;
@@ -1406,11 +1500,11 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 			goto next_desc;
 		}
 
-		e1000_receive_skb(adapter, netdev, skb, status,
-		                  rx_desc->special);
+		e1000_receive_skb(adapter, netdev, skb, staterr,
+				  rx_desc->wb.upper.vlan);
 
 next_desc:
-		rx_desc->status = 0;
+		rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
 
 		/* return some buffers to hardware, one at a time is too slow */
 		if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
@@ -1422,6 +1516,8 @@ next_desc:
 		/* use prefetched values */
 		rx_desc = next_rxd;
 		buffer_info = next_buffer;
+
+		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 	}
 	rx_ring->next_to_clean = i;
 
@@ -2820,6 +2916,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 		break;
 	}
 
+	/* Enable Extended Status in all Receive Descriptors */
+	rfctl = er32(RFCTL);
+	rfctl |= E1000_RFCTL_EXTEN;
+
 	/*
 	 * 82571 and greater support packet-split where the protocol
 	 * header is placed in skb->data and the packet data is
@@ -2845,9 +2945,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	if (adapter->rx_ps_pages) {
 		u32 psrctl = 0;
 
-		/* Configure extra packet-split registers */
-		rfctl = er32(RFCTL);
-		rfctl |= E1000_RFCTL_EXTEN;
 		/*
 		 * disable packet split support for IPv6 extension headers,
 		 * because some malformed IPv6 headers can hang the Rx
@@ -2855,8 +2952,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 		rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
 			  E1000_RFCTL_NEW_IPV6_EXT_DIS);
 
-		ew32(RFCTL, rfctl);
-
 		/* Enable Packet split descriptors */
 		rctl |= E1000_RCTL_DTYP_PS;
 
@@ -2879,6 +2974,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 		ew32(PSRCTL, psrctl);
 	}
 
+	ew32(RFCTL, rfctl);
 	ew32(RCTL, rctl);
 	/* just started the receive unit, no need to restart */
 	adapter->flags &= ~FLAG_RX_RESTART_NOW;
@@ -2904,18 +3000,19 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 		adapter->clean_rx = e1000_clean_rx_irq_ps;
 		adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
 	} else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
-		rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
+		rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
 		adapter->clean_rx = e1000_clean_jumbo_rx_irq;
 		adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
 	} else {
-		rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
+		rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
 		adapter->clean_rx = e1000_clean_rx_irq;
 		adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
 	}
 
 	/* disable receives while setting up the descriptors */
 	rctl = er32(RCTL);
-	ew32(RCTL, rctl & ~E1000_RCTL_EN);
+	if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+		ew32(RCTL, rctl & ~E1000_RCTL_EN);
 	e1e_flush();
 	usleep_range(10000, 20000);
 
@@ -2972,7 +3069,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 
 	/* Enable Receive Checksum Offload for TCP and UDP */
 	rxcsum = er32(RXCSUM);
-	if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
+	if (adapter->netdev->features & NETIF_F_RXCSUM) {
 		rxcsum |= E1000_RXCSUM_TUOFL;
 
 		/*
@@ -3394,7 +3491,8 @@ void e1000e_down(struct e1000_adapter *adapter)
 
 	/* disable receives in the hardware */
 	rctl = er32(RCTL);
-	ew32(RCTL, rctl & ~E1000_RCTL_EN);
+	if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+		ew32(RCTL, rctl & ~E1000_RCTL_EN);
 	/* flush and sleep below */
 
 	netif_stop_queue(netdev);
@@ -3403,6 +3501,7 @@ void e1000e_down(struct e1000_adapter *adapter)
 	tctl = er32(TCTL);
 	tctl &= ~E1000_TCTL_EN;
 	ew32(TCTL, tctl);
+
 	/* flush both disables and wait for them to finish */
 	e1e_flush();
 	usleep_range(10000, 20000);
@@ -4686,7 +4785,12 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
 	wmb();
 
 	tx_ring->next_to_use = i;
-	writel(i, adapter->hw.hw_addr + tx_ring->tail);
+
+	if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+		e1000e_update_tdt_wa(adapter, i);
+	else
+		writel(i, adapter->hw.hw_addr + tx_ring->tail);
+
 	/*
 	 * we need this if more than one processor can write to our tail
 	 * at a time, it synchronizes IO on IA64/Altix systems
@@ -5756,12 +5860,32 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter)
 	}
 }
 
+static int e1000_set_features(struct net_device *netdev, u32 features)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	u32 changed = features ^ netdev->features;
+
+	if (changed & (NETIF_F_TSO | NETIF_F_TSO6))
+		adapter->flags |= FLAG_TSO_FORCE;
+
+	if (!(changed & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
+			 NETIF_F_RXCSUM)))
+		return 0;
+
+	if (netif_running(netdev))
+		e1000e_reinit_locked(adapter);
+	else
+		e1000e_reset(adapter);
+
+	return 0;
+}
+
 static const struct net_device_ops e1000e_netdev_ops = {
 	.ndo_open		= e1000_open,
 	.ndo_stop		= e1000_close,
 	.ndo_start_xmit		= e1000_xmit_frame,
 	.ndo_get_stats64	= e1000e_get_stats64,
-	.ndo_set_multicast_list	= e1000_set_multi,
+	.ndo_set_rx_mode	= e1000_set_multi,
 	.ndo_set_mac_address	= e1000_set_mac,
 	.ndo_change_mtu		= e1000_change_mtu,
 	.ndo_do_ioctl		= e1000_ioctl,
@@ -5773,6 +5897,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= e1000_netpoll,
 #endif
+	.ndo_set_features = e1000_set_features,
 };
 
 /**
@@ -5932,21 +6057,25 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (e1000_check_reset_block(&adapter->hw))
 		e_info("PHY reset is blocked due to SOL/IDER session.\n");
 
-	netdev->features = NETIF_F_SG |
-			   NETIF_F_HW_CSUM |
-			   NETIF_F_HW_VLAN_TX |
-			   NETIF_F_HW_VLAN_RX;
+	/* Set initial default active device features */
+	netdev->features = (NETIF_F_SG |
+			    NETIF_F_HW_VLAN_RX |
+			    NETIF_F_HW_VLAN_TX |
+			    NETIF_F_TSO |
+			    NETIF_F_TSO6 |
+			    NETIF_F_RXCSUM |
+			    NETIF_F_HW_CSUM);
+
+	/* Set user-changeable features (subset of all device features) */
+	netdev->hw_features = netdev->features;
 
 	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
 		netdev->features |= NETIF_F_HW_VLAN_FILTER;
 
-	netdev->features |= NETIF_F_TSO;
-	netdev->features |= NETIF_F_TSO6;
-
-	netdev->vlan_features |= NETIF_F_TSO;
-	netdev->vlan_features |= NETIF_F_TSO6;
-	netdev->vlan_features |= NETIF_F_HW_CSUM;
-	netdev->vlan_features |= NETIF_F_SG;
+	netdev->vlan_features |= (NETIF_F_SG |
+				  NETIF_F_TSO |
+				  NETIF_F_TSO6 |
+				  NETIF_F_HW_CSUM);
 
 	if (pci_using_dac) {
 		netdev->features |= NETIF_F_HIGHDMA;
diff --git a/drivers/net/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 4dd9b63273f6..4dd9b63273f6 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 2a6ee13285b1..8666476cb9be 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -537,6 +537,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
 	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
 		       E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
 	ew32(KMRNCTRLSTA, kmrnctrlsta);
+	e1e_flush();
 
 	udelay(2);
 
@@ -609,6 +610,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
 	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
 		       E1000_KMRNCTRLSTA_OFFSET) | data;
 	ew32(KMRNCTRLSTA, kmrnctrlsta);
+	e1e_flush();
 
 	udelay(2);
 
diff --git a/drivers/net/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile
index c6e4621b6262..c6e4621b6262 100644
--- a/drivers/net/igb/Makefile
+++ b/drivers/net/ethernet/intel/igb/Makefile
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index c0857bdfb03a..c0857bdfb03a 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index 786e110011a3..786e110011a3 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 7b8ddd830f19..7b8ddd830f19 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 4519a1367170..4519a1367170 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
index 2b5ef761d2ab..2b5ef761d2ab 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/ethernet/intel/igb/e1000_mac.h
index 4927f61fbbc8..4927f61fbbc8 100644
--- a/drivers/net/igb/e1000_mac.h
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.h
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/ethernet/intel/igb/e1000_mbx.c
index 74f2f11ac290..74f2f11ac290 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mbx.c
diff --git a/drivers/net/igb/e1000_mbx.h b/drivers/net/ethernet/intel/igb/e1000_mbx.h
index eddb0f83dcea..eddb0f83dcea 100644
--- a/drivers/net/igb/e1000_mbx.h
+++ b/drivers/net/ethernet/intel/igb/e1000_mbx.h
diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c
index 7dcd65cede56..40407124e722 100644
--- a/drivers/net/igb/e1000_nvm.c
+++ b/drivers/net/ethernet/intel/igb/e1000_nvm.c
@@ -285,6 +285,7 @@ static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
 		/* Clear SK and CS */
 		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
 		wr32(E1000_EECD, eecd);
+		wrfl();
 		udelay(1);
 		timeout = NVM_MAX_RETRY_SPI;
 
diff --git a/drivers/net/igb/e1000_nvm.h b/drivers/net/ethernet/intel/igb/e1000_nvm.h
index a2a7ca9fa733..a2a7ca9fa733 100644
--- a/drivers/net/igb/e1000_nvm.h
+++ b/drivers/net/ethernet/intel/igb/e1000_nvm.h
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index e662554c62d6..e662554c62d6 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
index 8510797b9d81..8510797b9d81 100644
--- a/drivers/net/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 0990f6d860c7..0990f6d860c7 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
diff --git a/drivers/net/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 265e151b66c4..265e151b66c4 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index ff244ce803ce..414b0225be89 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -1225,6 +1225,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	wr32(E1000_IMC, ~0);
+	wrfl();
 	msleep(10);
 
 	/* Define all writable bits for ICS */
@@ -1268,6 +1269,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
 
 			wr32(E1000_IMC, mask);
 			wr32(E1000_ICS, mask);
+			wrfl();
 			msleep(10);
 
 			if (adapter->test_icr & mask) {
@@ -1289,6 +1291,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
 
 		wr32(E1000_IMS, mask);
 		wr32(E1000_ICS, mask);
+		wrfl();
 		msleep(10);
 
 		if (!(adapter->test_icr & mask)) {
@@ -1310,6 +1313,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
 
 			wr32(E1000_IMC, ~mask);
 			wr32(E1000_ICS, ~mask);
+			wrfl();
 			msleep(10);
 
 			if (adapter->test_icr & mask) {
@@ -1321,6 +1325,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	wr32(E1000_IMC, ~0);
+	wrfl();
 	msleep(10);
 
 	/* Unhook test interrupt handler */
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index dc599059512a..801608497409 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -39,6 +39,7 @@
 #include <linux/net_tstamp.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
+#include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
@@ -1052,6 +1053,7 @@ msi_only:
 		kfree(adapter->vf_data);
 		adapter->vf_data = NULL;
 		wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+		wrfl();
 		msleep(100);
 		dev_info(&adapter->pdev->dev, "IOV Disabled\n");
 	}
@@ -1788,7 +1790,6 @@ static const struct net_device_ops igb_netdev_ops = {
 	.ndo_start_xmit		= igb_xmit_frame_adv,
 	.ndo_get_stats64	= igb_get_stats64,
 	.ndo_set_rx_mode	= igb_set_rx_mode,
-	.ndo_set_multicast_list	= igb_set_rx_mode,
 	.ndo_set_mac_address	= igb_set_mac,
 	.ndo_change_mtu		= igb_change_mtu,
 	.ndo_do_ioctl		= igb_ioctl,
@@ -1972,6 +1973,8 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		netdev->features |= NETIF_F_SCTP_CSUM;
 	}
 
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
 	adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
 
 	/* before reading the NVM, reset the controller to put the device in a
@@ -2022,7 +2025,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 
 	if (hw->bus.func == 0)
 		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
-	else if (hw->mac.type == e1000_82580)
+	else if (hw->mac.type >= e1000_82580)
 		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
 		                 NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
 		                 &eeprom_data);
@@ -2198,6 +2201,7 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 		kfree(adapter->vf_data);
 		adapter->vf_data = NULL;
 		wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+		wrfl();
 		msleep(100);
 		dev_info(&pdev->dev, "IOV Disabled\n");
 	}
diff --git a/drivers/net/igbvf/Makefile b/drivers/net/ethernet/intel/igbvf/Makefile
index 0fa3db3dd8b6..0fa3db3dd8b6 100644
--- a/drivers/net/igbvf/Makefile
+++ b/drivers/net/ethernet/intel/igbvf/Makefile
diff --git a/drivers/net/igbvf/defines.h b/drivers/net/ethernet/intel/igbvf/defines.h
index 79f2604673fe..79f2604673fe 100644
--- a/drivers/net/igbvf/defines.h
+++ b/drivers/net/ethernet/intel/igbvf/defines.h
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/ethernet/intel/igbvf/ethtool.c
index b0b14d63dfbf..b0b14d63dfbf 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/ethernet/intel/igbvf/ethtool.c
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/ethernet/intel/igbvf/igbvf.h
index fd4a7b780fdd..fd4a7b780fdd 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/ethernet/intel/igbvf/igbvf.h
diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/ethernet/intel/igbvf/mbx.c
index 3d6f4cc3998a..3d6f4cc3998a 100644
--- a/drivers/net/igbvf/mbx.c
+++ b/drivers/net/ethernet/intel/igbvf/mbx.c
diff --git a/drivers/net/igbvf/mbx.h b/drivers/net/ethernet/intel/igbvf/mbx.h
index c2883c45d477..c2883c45d477 100644
--- a/drivers/net/igbvf/mbx.h
+++ b/drivers/net/ethernet/intel/igbvf/mbx.h
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 1330c8e932da..a6bdb3c744f0 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -1226,6 +1226,7 @@ static void igbvf_configure_tx(struct igbvf_adapter *adapter)
 	/* disable transmits */
 	txdctl = er32(TXDCTL(0));
 	ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
+	e1e_flush();
 	msleep(10);
 
 	/* Setup the HW Tx Head and Tail descriptor pointers */
@@ -1306,6 +1307,7 @@ static void igbvf_configure_rx(struct igbvf_adapter *adapter)
 	/* disable receives */
 	rxdctl = er32(RXDCTL(0));
 	ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
+	e1e_flush();
 	msleep(10);
 
 	rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc);
@@ -2536,7 +2538,7 @@ static const struct net_device_ops igbvf_netdev_ops = {
 	.ndo_stop                       = igbvf_close,
 	.ndo_start_xmit                 = igbvf_xmit_frame,
 	.ndo_get_stats                  = igbvf_get_stats,
-	.ndo_set_multicast_list         = igbvf_set_multi,
+	.ndo_set_rx_mode		= igbvf_set_multi,
 	.ndo_set_mac_address            = igbvf_set_mac,
 	.ndo_change_mtu                 = igbvf_change_mtu,
 	.ndo_do_ioctl                   = igbvf_ioctl,
diff --git a/drivers/net/igbvf/regs.h b/drivers/net/ethernet/intel/igbvf/regs.h
index 77e18d3d6b15..77e18d3d6b15 100644
--- a/drivers/net/igbvf/regs.h
+++ b/drivers/net/ethernet/intel/igbvf/regs.h
diff --git a/drivers/net/igbvf/vf.c b/drivers/net/ethernet/intel/igbvf/vf.c
index af3822f9ea9a..af3822f9ea9a 100644
--- a/drivers/net/igbvf/vf.c
+++ b/drivers/net/ethernet/intel/igbvf/vf.c
diff --git a/drivers/net/igbvf/vf.h b/drivers/net/ethernet/intel/igbvf/vf.h
index d7ed58fcd9bb..d7ed58fcd9bb 100644
--- a/drivers/net/igbvf/vf.h
+++ b/drivers/net/ethernet/intel/igbvf/vf.h
diff --git a/drivers/net/ixgb/Makefile b/drivers/net/ethernet/intel/ixgb/Makefile
index 0b20c5e62ffe..0b20c5e62ffe 100644
--- a/drivers/net/ixgb/Makefile
+++ b/drivers/net/ethernet/intel/ixgb/Makefile
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ethernet/intel/ixgb/ixgb.h
index 49e8408f05fc..49e8408f05fc 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ethernet/intel/ixgb/ixgb.h
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c
index c982ab9f9005..38b362b67857 100644
--- a/drivers/net/ixgb/ixgb_ee.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c
@@ -57,6 +57,7 @@ ixgb_raise_clock(struct ixgb_hw *hw,
 	 */
 	*eecd_reg = *eecd_reg | IXGB_EECD_SK;
 	IXGB_WRITE_REG(hw, EECD, *eecd_reg);
+	IXGB_WRITE_FLUSH(hw);
 	udelay(50);
 }
 
@@ -75,6 +76,7 @@ ixgb_lower_clock(struct ixgb_hw *hw,
 	 */
 	*eecd_reg = *eecd_reg & ~IXGB_EECD_SK;
 	IXGB_WRITE_REG(hw, EECD, *eecd_reg);
+	IXGB_WRITE_FLUSH(hw);
 	udelay(50);
 }
 
@@ -112,6 +114,7 @@ ixgb_shift_out_bits(struct ixgb_hw *hw,
 			eecd_reg |= IXGB_EECD_DI;
 
 		IXGB_WRITE_REG(hw, EECD, eecd_reg);
+		IXGB_WRITE_FLUSH(hw);
 
 		udelay(50);
 
@@ -206,21 +209,25 @@ ixgb_standby_eeprom(struct ixgb_hw *hw)
 	/*  Deselect EEPROM  */
 	eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
 	IXGB_WRITE_REG(hw, EECD, eecd_reg);
+	IXGB_WRITE_FLUSH(hw);
 	udelay(50);
 
 	/*  Clock high  */
 	eecd_reg |= IXGB_EECD_SK;
 	IXGB_WRITE_REG(hw, EECD, eecd_reg);
+	IXGB_WRITE_FLUSH(hw);
 	udelay(50);
 
 	/*  Select EEPROM  */
 	eecd_reg |= IXGB_EECD_CS;
 	IXGB_WRITE_REG(hw, EECD, eecd_reg);
+	IXGB_WRITE_FLUSH(hw);
 	udelay(50);
 
 	/*  Clock low  */
 	eecd_reg &= ~IXGB_EECD_SK;
 	IXGB_WRITE_REG(hw, EECD, eecd_reg);
+	IXGB_WRITE_FLUSH(hw);
 	udelay(50);
 }
 
@@ -239,11 +246,13 @@ ixgb_clock_eeprom(struct ixgb_hw *hw)
 	/*  Rising edge of clock  */
 	eecd_reg |= IXGB_EECD_SK;
 	IXGB_WRITE_REG(hw, EECD, eecd_reg);
+	IXGB_WRITE_FLUSH(hw);
 	udelay(50);
 
 	/*  Falling edge of clock  */
 	eecd_reg &= ~IXGB_EECD_SK;
 	IXGB_WRITE_REG(hw, EECD, eecd_reg);
+	IXGB_WRITE_FLUSH(hw);
 	udelay(50);
 }
 
diff --git a/drivers/net/ixgb/ixgb_ee.h b/drivers/net/ethernet/intel/ixgb/ixgb_ee.h
index 7ea12652f471..7ea12652f471 100644
--- a/drivers/net/ixgb/ixgb_ee.h
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_ee.h
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
index 6da890b9534c..6da890b9534c 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ethernet/intel/ixgb/ixgb_hw.c
index 6cb2e42ff4c1..3d61a9e4faf7 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_hw.c
@@ -149,6 +149,7 @@ ixgb_adapter_stop(struct ixgb_hw *hw)
 	 */
 	IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN);
 	IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN);
+	IXGB_WRITE_FLUSH(hw);
 	msleep(IXGB_DELAY_BEFORE_RESET);
 
 	/* Issue a global reset to the MAC.  This will reset the chip's
@@ -1220,6 +1221,7 @@ ixgb_optics_reset_bcm(struct ixgb_hw *hw)
 	ctrl &= ~IXGB_CTRL0_SDP2;
 	ctrl |= IXGB_CTRL0_SDP3;
 	IXGB_WRITE_REG(hw, CTRL0, ctrl);
+	IXGB_WRITE_FLUSH(hw);
 
 	/* SerDes needs extra delay */
 	msleep(IXGB_SUN_PHY_RESET_DELAY);
diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ethernet/intel/ixgb/ixgb_hw.h
index 873d32b89fba..873d32b89fba 100644
--- a/drivers/net/ixgb/ixgb_hw.h
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_hw.h
diff --git a/drivers/net/ixgb/ixgb_ids.h b/drivers/net/ethernet/intel/ixgb/ixgb_ids.h
index 2a58847f46e8..2a58847f46e8 100644
--- a/drivers/net/ixgb/ixgb_ids.h
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_ids.h
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
index 6a130eb51cfa..b8ef2c0fc5d0 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -330,7 +330,7 @@ static const struct net_device_ops ixgb_netdev_ops = {
 	.ndo_stop		= ixgb_close,
 	.ndo_start_xmit		= ixgb_xmit_frame,
 	.ndo_get_stats		= ixgb_get_stats,
-	.ndo_set_multicast_list	= ixgb_set_multi,
+	.ndo_set_rx_mode	= ixgb_set_multi,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ixgb_set_mac,
 	.ndo_change_mtu		= ixgb_change_mtu,
diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
index e361185920ef..e361185920ef 100644
--- a/drivers/net/ixgb/ixgb_osdep.h
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ethernet/intel/ixgb/ixgb_param.c
index dd7fbeb1f7d1..dd7fbeb1f7d1 100644
--- a/drivers/net/ixgb/ixgb_param.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_param.c
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile
index 7d7387fbdecd..7d7387fbdecd 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ethernet/intel/ixgbe/Makefile
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index e04a8e49e6dc..58482fc3024b 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -91,13 +91,17 @@
 #define IXGBE_RX_BUFFER_WRITE	16	/* Must be power of 2 */
 
 #define IXGBE_TX_FLAGS_CSUM		(u32)(1)
-#define IXGBE_TX_FLAGS_VLAN		(u32)(1 << 1)
-#define IXGBE_TX_FLAGS_TSO		(u32)(1 << 2)
-#define IXGBE_TX_FLAGS_IPV4		(u32)(1 << 3)
-#define IXGBE_TX_FLAGS_FCOE		(u32)(1 << 4)
-#define IXGBE_TX_FLAGS_FSO		(u32)(1 << 5)
+#define IXGBE_TX_FLAGS_HW_VLAN		(u32)(1 << 1)
+#define IXGBE_TX_FLAGS_SW_VLAN		(u32)(1 << 2)
+#define IXGBE_TX_FLAGS_TSO		(u32)(1 << 3)
+#define IXGBE_TX_FLAGS_IPV4		(u32)(1 << 4)
+#define IXGBE_TX_FLAGS_FCOE		(u32)(1 << 5)
+#define IXGBE_TX_FLAGS_FSO		(u32)(1 << 6)
+#define IXGBE_TX_FLAGS_TXSW		(u32)(1 << 7)
+#define IXGBE_TX_FLAGS_MAPPED_AS_PAGE	(u32)(1 << 8)
 #define IXGBE_TX_FLAGS_VLAN_MASK	0xffff0000
-#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK   0x0000e000
+#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK	0xe0000000
+#define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT  29
 #define IXGBE_TX_FLAGS_VLAN_SHIFT	16
 
 #define IXGBE_MAX_RSC_INT_RATE          162760
@@ -141,14 +145,14 @@ struct vf_macvlans {
 /* wrapper around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer */
 struct ixgbe_tx_buffer {
-	struct sk_buff *skb;
-	dma_addr_t dma;
+	union ixgbe_adv_tx_desc *next_to_watch;
 	unsigned long time_stamp;
-	u16 length;
-	u16 next_to_watch;
-	unsigned int bytecount;
+	dma_addr_t dma;
+	u32 length;
+	u32 tx_flags;
+	struct sk_buff *skb;
+	u32 bytecount;
 	u16 gso_segs;
-	u8 mapped_as_page;
 };
 
 struct ixgbe_rx_buffer {
@@ -206,6 +210,7 @@ enum ixbge_ring_state_t {
 #define clear_ring_rsc_enabled(ring) \
 	clear_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
 struct ixgbe_ring {
+	struct ixgbe_ring *next;	/* pointer to next ring in q_vector */
 	void *desc;			/* descriptor ring memory */
 	struct device *dev;             /* device for DMA mapping */
 	struct net_device *netdev;      /* netdev ring belongs to */
@@ -274,11 +279,7 @@ struct ixgbe_ring_feature {
 } ____cacheline_internodealigned_in_smp;
 
 struct ixgbe_ring_container {
-#if MAX_RX_QUEUES > MAX_TX_QUEUES
-	DECLARE_BITMAP(idx, MAX_RX_QUEUES);
-#else
-	DECLARE_BITMAP(idx, MAX_TX_QUEUES);
-#endif
+	struct ixgbe_ring *ring;	/* pointer to linked list of rings */
 	unsigned int total_bytes;	/* total bytes processed this int */
 	unsigned int total_packets;	/* total packets processed this int */
 	u16 work_limit;			/* total work allowed per interrupt */
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 0d4e38264492..0d4e38264492 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 3b3dd4df4c5c..f193fc2f28fb 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -213,6 +213,7 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
 	switch (hw->phy.type) {
 	case ixgbe_phy_tn:
 		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+		phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
 		phy->ops.get_firmware_version =
 		             &ixgbe_get_phy_firmware_version_tnx;
 		break;
@@ -1107,79 +1108,6 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_set_fdir_rxpba_82599 - Initialize Flow Director Rx packet buffer
- *  @hw: pointer to hardware structure
- *  @pballoc: which mode to allocate filters with
- **/
-static s32 ixgbe_set_fdir_rxpba_82599(struct ixgbe_hw *hw, const u32 pballoc)
-{
-	u32 fdir_pbsize = hw->mac.rx_pb_size << IXGBE_RXPBSIZE_SHIFT;
-	u32 current_rxpbsize = 0;
-	int i;
-
-	/* reserve space for Flow Director filters */
-	switch (pballoc) {
-	case IXGBE_FDIR_PBALLOC_256K:
-		fdir_pbsize -= 256 << IXGBE_RXPBSIZE_SHIFT;
-		break;
-	case IXGBE_FDIR_PBALLOC_128K:
-		fdir_pbsize -= 128 << IXGBE_RXPBSIZE_SHIFT;
-		break;
-	case IXGBE_FDIR_PBALLOC_64K:
-		fdir_pbsize -= 64 << IXGBE_RXPBSIZE_SHIFT;
-		break;
-	case IXGBE_FDIR_PBALLOC_NONE:
-	default:
-		return IXGBE_ERR_PARAM;
-	}
-
-	/* determine current RX packet buffer size */
-	for (i = 0; i < 8; i++)
-		current_rxpbsize += IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
-
-	/* if there is already room for the filters do nothing */
-	if (current_rxpbsize <= fdir_pbsize)
-		return 0;
-
-	if (current_rxpbsize > hw->mac.rx_pb_size) {
-		/*
-		 * if rxpbsize is greater than max then HW max the Rx buffer
-		 * sizes are unconfigured or misconfigured since HW default is
-		 * to give the full buffer to each traffic class resulting in
-		 * the total size being buffer size 8x actual size
-		 *
-		 * This assumes no DCB since the RXPBSIZE registers appear to
-		 * be unconfigured.
-		 */
-		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), fdir_pbsize);
-		for (i = 1; i < 8; i++)
-			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
-	} else {
-		/*
-		 * Since the Rx packet buffer appears to have already been
-		 * configured we need to shrink each packet buffer by enough
-		 * to make room for the filters.  As such we take each rxpbsize
-		 * value and multiply it by a fraction representing the size
-		 * needed over the size we currently have.
-		 *
-		 * We need to reduce fdir_pbsize and current_rxpbsize to
-		 * 1/1024 of their original values in order to avoid
-		 * overflowing the u32 being used to store rxpbsize.
-		 */
-		fdir_pbsize >>= IXGBE_RXPBSIZE_SHIFT;
-		current_rxpbsize >>= IXGBE_RXPBSIZE_SHIFT;
-		for (i = 0; i < 8; i++) {
-			u32 rxpbsize = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
-			rxpbsize *= fdir_pbsize;
-			rxpbsize /= current_rxpbsize;
-			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpbsize);
-		}
-	}
-
-	return 0;
-}
-
-/**
  *  ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
  *  @hw: pointer to hardware structure
  *  @fdirctrl: value to write to flow director control register
@@ -1226,13 +1154,6 @@ static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
  **/
 s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
 {
-	s32 err;
-
-	/* Before enabling Flow Director, verify the Rx Packet Buffer size */
-	err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
-	if (err)
-		return err;
-
 	/*
 	 * Continue setup of fdirctrl register bits:
 	 *  Move the flexible bytes to use the ethertype - shift 6 words
@@ -1257,13 +1178,6 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
  **/
 s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
 {
-	s32 err;
-
-	/* Before enabling Flow Director, verify the Rx Packet Buffer size */
-	err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
-	if (err)
-		return err;
-
 	/*
 	 * Continue setup of fdirctrl register bits:
 	 *  Turn perfect match filtering on
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 777051f54e53..91986afe969d 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -225,8 +225,9 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
 	IXGBE_READ_REG(hw, IXGBE_GORCH);
 	IXGBE_READ_REG(hw, IXGBE_GOTCL);
 	IXGBE_READ_REG(hw, IXGBE_GOTCH);
-	for (i = 0; i < 8; i++)
-		IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		for (i = 0; i < 8; i++)
+			IXGBE_READ_REG(hw, IXGBE_RNBC(i));
 	IXGBE_READ_REG(hw, IXGBE_RUC);
 	IXGBE_READ_REG(hw, IXGBE_RFC);
 	IXGBE_READ_REG(hw, IXGBE_ROC);
@@ -2121,8 +2122,8 @@ static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
 	 */
 
 	linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-	if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
-	    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+	if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+	    (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
 		ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
 		goto out;
 	}
@@ -2632,6 +2633,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 		autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 		autoc_reg |= IXGBE_AUTOC_FLU;
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+		IXGBE_WRITE_FLUSH(hw);
 		usleep_range(10000, 20000);
 	}
 
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index f24fd64a4c46..f24fd64a4c46 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
index 9d88c31487bc..9d88c31487bc 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h
index e85826ae0320..e85826ae0320 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
index 2288c3cac010..2288c3cac010 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h
index 2f318935561a..2f318935561a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
index ade98200288c..d64fb872978e 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
@@ -252,8 +252,10 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en)
 		reg &= ~IXGBE_MFLCN_RFCE;
 		reg |= IXGBE_MFLCN_RPFCE | IXGBE_MFLCN_DPF;
 
-		if (hw->mac.type == ixgbe_mac_X540)
+		if (hw->mac.type == ixgbe_mac_X540) {
+			reg &= ~IXGBE_MFLCN_RPFCE_MASK;
 			reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
+		}
 
 		IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
index 08d1749862a3..08d1749862a3 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
index 0ace6ce1d0b4..0422e356b6fc 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
@@ -118,49 +118,11 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 	if (!!state != !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
 		return err;
 
-	if (state > 0) {
-		/* Turn on DCB */
-		if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
-			e_err(drv, "Enable failed, needs MSI-X\n");
-			err = 1;
-			goto out;
-		}
-
-		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
-
-		switch (adapter->hw.mac.type) {
-		case ixgbe_mac_82598EB:
-			adapter->last_lfc_mode = adapter->hw.fc.current_mode;
-			adapter->hw.fc.requested_mode = ixgbe_fc_none;
-			break;
-		case ixgbe_mac_82599EB:
-		case ixgbe_mac_X540:
-			adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
-			break;
-		default:
-			break;
-		}
-
-		ixgbe_setup_tc(netdev, MAX_TRAFFIC_CLASS);
-	} else {
-		/* Turn off DCB */
-		adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
-		adapter->temp_dcb_cfg.pfc_mode_enable = false;
-		adapter->dcb_cfg.pfc_mode_enable = false;
-		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
-		switch (adapter->hw.mac.type) {
-		case ixgbe_mac_82599EB:
-		case ixgbe_mac_X540:
-			if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
-				adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
-			break;
-		default:
-			break;
-		}
-		ixgbe_setup_tc(netdev, 0);
-	}
+	if (state > 0)
+		err = ixgbe_setup_tc(netdev, MAX_TRAFFIC_CLASS);
+	else
+		err = ixgbe_setup_tc(netdev, 0);
 
-out:
 	return err;
 }
 
@@ -414,7 +376,7 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 		u8 prio_tc[MAX_TRAFFIC_CLASS] = {0, 1, 2, 3, 4, 5, 6, 7};
 		int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 
-#ifdef CONFIG_FCOE
+#ifdef IXGBE_FCOE
 		if (adapter->netdev->features & NETIF_F_FCOE_MTU)
 			max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
 #endif
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index dc649553a0a6..9c12b35232af 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -324,12 +324,16 @@ static int ixgbe_set_settings(struct net_device *netdev,
 
 	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
 	    (hw->phy.multispeed_fiber)) {
-		/* 10000/copper and 1000/copper must autoneg
-		 * this function does not support any duplex forcing, but can
-		 * limit the advertising of the adapter to only 10000 or 1000 */
+		/*
+		 * this function does not support duplex forcing, but can
+		 * limit the advertising of the adapter to the specified speed
+		 */
 		if (ecmd->autoneg == AUTONEG_DISABLE)
 			return -EINVAL;
 
+		if (ecmd->advertising & ~ecmd->supported)
+			return -EINVAL;
+
 		old = hw->phy.autoneg_advertised;
 		advertised = 0;
 		if (ecmd->advertising & ADVERTISED_10000baseT_Full)
@@ -1378,6 +1382,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+	IXGBE_WRITE_FLUSH(&adapter->hw);
 	usleep_range(10000, 20000);
 
 	/* Test each interrupt */
@@ -1398,6 +1403,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 			                ~mask & 0x00007FFF);
 			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
 			                ~mask & 0x00007FFF);
+			IXGBE_WRITE_FLUSH(&adapter->hw);
 			usleep_range(10000, 20000);
 
 			if (adapter->test_icr & mask) {
@@ -1415,6 +1421,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 		adapter->test_icr = 0;
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+		IXGBE_WRITE_FLUSH(&adapter->hw);
 		usleep_range(10000, 20000);
 
 		if (!(adapter->test_icr &mask)) {
@@ -1435,6 +1442,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 			                ~mask & 0x00007FFF);
 			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
 			                ~mask & 0x00007FFF);
+			IXGBE_WRITE_FLUSH(&adapter->hw);
 			usleep_range(10000, 20000);
 
 			if (adapter->test_icr) {
@@ -1446,6 +1454,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+	IXGBE_WRITE_FLUSH(&adapter->hw);
 	usleep_range(10000, 20000);
 
 	/* Unhook test interrupt handler */
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 824edae77865..e9b992fe5e46 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -241,10 +241,12 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 	 */
 	if (lastsize == bufflen) {
 		if (j >= IXGBE_BUFFCNT_MAX) {
-			e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
-				"not enough user buffers. We need an extra "
-				"buffer because lastsize is bufflen.\n",
-				xid, i, j, dmacount, (u64)addr);
+			printk_once("Will NOT use DDP since there are not "
+				    "enough user buffers. We need an  extra "
+				    "buffer because lastsize is bufflen. "
+				    "xid=%x:%d,%d,%d:addr=%llx\n",
+				    xid, i, j, dmacount, (u64)addr);
+
 			goto out_noddp_free;
 		}
 
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
index 99de145e290d..99de145e290d 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1be617545dc9..a30f8266df00 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -42,6 +42,7 @@
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
 #include <linux/ethtool.h>
+#include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <linux/prefetch.h>
 #include <scsi/fc/fc_fcoe.h>
@@ -184,6 +185,7 @@ static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 	vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
 	vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
 	IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
+	IXGBE_WRITE_FLUSH(hw);
 
 	/* take a breather then clean up driver data */
 	msleep(100);
@@ -383,7 +385,7 @@ static void ixgbe_dump(struct ixgbe_adapter *adapter)
 		tx_ring = adapter->tx_ring[n];
 		tx_buffer_info =
 			&tx_ring->tx_buffer_info[tx_ring->next_to_clean];
-		pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
+		pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
 			   n, tx_ring->next_to_use, tx_ring->next_to_clean,
 			   (u64)tx_buffer_info->dma,
 			   tx_buffer_info->length,
@@ -422,7 +424,7 @@ static void ixgbe_dump(struct ixgbe_adapter *adapter)
 			tx_buffer_info = &tx_ring->tx_buffer_info[i];
 			u0 = (struct my_u0 *)tx_desc;
 			pr_info("T [0x%03X]    %016llX %016llX %016llX"
-				" %04X  %3X %016llX %p", i,
+				" %04X  %p %016llX %p", i,
 				le64_to_cpu(u0->a),
 				le64_to_cpu(u0->b),
 				(u64)tx_buffer_info->dma,
@@ -641,27 +643,31 @@ static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter,
 	}
 }
 
-void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring,
-				      struct ixgbe_tx_buffer *tx_buffer_info)
+static inline void ixgbe_unmap_tx_resource(struct ixgbe_ring *ring,
+					   struct ixgbe_tx_buffer *tx_buffer)
 {
-	if (tx_buffer_info->dma) {
-		if (tx_buffer_info->mapped_as_page)
-			dma_unmap_page(tx_ring->dev,
-				       tx_buffer_info->dma,
-				       tx_buffer_info->length,
-				       DMA_TO_DEVICE);
+	if (tx_buffer->dma) {
+		if (tx_buffer->tx_flags & IXGBE_TX_FLAGS_MAPPED_AS_PAGE)
+			dma_unmap_page(ring->dev,
+			               tx_buffer->dma,
+			               tx_buffer->length,
+			               DMA_TO_DEVICE);
 		else
-			dma_unmap_single(tx_ring->dev,
-					 tx_buffer_info->dma,
-					 tx_buffer_info->length,
-					 DMA_TO_DEVICE);
-		tx_buffer_info->dma = 0;
+			dma_unmap_single(ring->dev,
+			                 tx_buffer->dma,
+			                 tx_buffer->length,
+			                 DMA_TO_DEVICE);
 	}
-	if (tx_buffer_info->skb) {
+	tx_buffer->dma = 0;
+}
+
+void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring,
+				      struct ixgbe_tx_buffer *tx_buffer_info)
+{
+	ixgbe_unmap_tx_resource(tx_ring, tx_buffer_info);
+	if (tx_buffer_info->skb)
 		dev_kfree_skb_any(tx_buffer_info->skb);
-		tx_buffer_info->skb = NULL;
-	}
-	tx_buffer_info->time_stamp = 0;
+	tx_buffer_info->skb = NULL;
 	/* tx_buffer_info must be completely set up in the transmit path */
 }
 
@@ -795,56 +801,72 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 			       struct ixgbe_ring *tx_ring)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
-	union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
-	struct ixgbe_tx_buffer *tx_buffer_info;
+	struct ixgbe_tx_buffer *tx_buffer;
+	union ixgbe_adv_tx_desc *tx_desc;
 	unsigned int total_bytes = 0, total_packets = 0;
-	u16 i, eop, count = 0;
+	u16 budget = q_vector->tx.work_limit;
+	u16 i = tx_ring->next_to_clean;
 
-	i = tx_ring->next_to_clean;
-	eop = tx_ring->tx_buffer_info[i].next_to_watch;
-	eop_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
+	tx_buffer = &tx_ring->tx_buffer_info[i];
+	tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
 
-	while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
-	       (count < q_vector->tx.work_limit)) {
-		bool cleaned = false;
-		rmb(); /* read buffer_info after eop_desc */
-		for ( ; !cleaned; count++) {
-			tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
-			tx_buffer_info = &tx_ring->tx_buffer_info[i];
+	for (; budget; budget--) {
+		union ixgbe_adv_tx_desc *eop_desc = tx_buffer->next_to_watch;
+
+		/* if next_to_watch is not set then there is no work pending */
+		if (!eop_desc)
+			break;
+
+		/* if DD is not set pending work has not been completed */
+		if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)))
+			break;
+
+		/* count the packet as being completed */
+		tx_ring->tx_stats.completed++;
+
+		/* clear next_to_watch to prevent false hangs */
+		tx_buffer->next_to_watch = NULL;
 
+		/* prevent any other reads prior to eop_desc being verified */
+		rmb();
+
+		do {
+			ixgbe_unmap_tx_resource(tx_ring, tx_buffer);
 			tx_desc->wb.status = 0;
-			cleaned = (i == eop);
+			if (likely(tx_desc == eop_desc)) {
+				eop_desc = NULL;
+				dev_kfree_skb_any(tx_buffer->skb);
+				tx_buffer->skb = NULL;
+
+				total_bytes += tx_buffer->bytecount;
+				total_packets += tx_buffer->gso_segs;
+			}
 
+			tx_buffer++;
+			tx_desc++;
 			i++;
-			if (i == tx_ring->count)
+			if (unlikely(i == tx_ring->count)) {
 				i = 0;
 
-			if (cleaned && tx_buffer_info->skb) {
-				total_bytes += tx_buffer_info->bytecount;
-				total_packets += tx_buffer_info->gso_segs;
+				tx_buffer = tx_ring->tx_buffer_info;
+				tx_desc = IXGBE_TX_DESC_ADV(tx_ring, 0);
 			}
 
-			ixgbe_unmap_and_free_tx_resource(tx_ring,
-							 tx_buffer_info);
-		}
-
-		tx_ring->tx_stats.completed++;
-		eop = tx_ring->tx_buffer_info[i].next_to_watch;
-		eop_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
+		} while (eop_desc);
 	}
 
 	tx_ring->next_to_clean = i;
+	u64_stats_update_begin(&tx_ring->syncp);
 	tx_ring->stats.bytes += total_bytes;
 	tx_ring->stats.packets += total_packets;
-	u64_stats_update_begin(&tx_ring->syncp);
+	u64_stats_update_end(&tx_ring->syncp);
 	q_vector->tx.total_bytes += total_bytes;
 	q_vector->tx.total_packets += total_packets;
-	u64_stats_update_end(&tx_ring->syncp);
 
 	if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) {
 		/* schedule immediate reset if we believe we hung */
 		struct ixgbe_hw *hw = &adapter->hw;
-		tx_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
+		tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
 		e_err(drv, "Detected Tx Unit Hang\n"
 			"  Tx Queue             <%d>\n"
 			"  TDH, TDT             <%x>, <%x>\n"
@@ -856,8 +878,8 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 			tx_ring->queue_index,
 			IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)),
 			IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)),
-			tx_ring->next_to_use, eop,
-			tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
+			tx_ring->next_to_use, i,
+			tx_ring->tx_buffer_info[i].time_stamp, jiffies);
 
 		netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
 
@@ -869,11 +891,11 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 		ixgbe_tx_timeout_reset(adapter);
 
 		/* the adapter is about to reset, no point in enabling stuff */
-		return true;
+		return budget;
 	}
 
 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
-	if (unlikely(count && netif_carrier_ok(tx_ring->netdev) &&
+	if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
 		     (ixgbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) {
 		/* Make sure that anybody stopping the queue after this
 		 * sees the new next_to_clean.
@@ -886,7 +908,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 		}
 	}
 
-	return count < q_vector->tx.work_limit;
+	return budget;
 }
 
 #ifdef CONFIG_IXGBE_DCA
@@ -952,26 +974,17 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
 static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_ring *ring;
 	int cpu = get_cpu();
-	long r_idx;
-	int i;
 
 	if (q_vector->cpu == cpu)
 		goto out_no_update;
 
-	r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
-	for (i = 0; i < q_vector->tx.count; i++) {
-		ixgbe_update_tx_dca(adapter, adapter->tx_ring[r_idx], cpu);
-		r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
-				      r_idx + 1);
-	}
+	for (ring = q_vector->tx.ring; ring != NULL; ring = ring->next)
+		ixgbe_update_tx_dca(adapter, ring, cpu);
 
-	r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
-	for (i = 0; i < q_vector->rx.count; i++) {
-		ixgbe_update_rx_dca(adapter, adapter->rx_ring[r_idx], cpu);
-		r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
-				      r_idx + 1);
-	}
+	for (ring = q_vector->rx.ring; ring != NULL; ring = ring->next)
+		ixgbe_update_rx_dca(adapter, ring, cpu);
 
 	q_vector->cpu = cpu;
 out_no_update:
@@ -1005,7 +1018,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
 	struct ixgbe_adapter *adapter = dev_get_drvdata(dev);
 	unsigned long event = *(unsigned long *)data;
 
-	if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
+	if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE))
 		return 0;
 
 	switch (event) {
@@ -1458,8 +1471,10 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
 			ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb,
 						   staterr);
-			if (!ddp_bytes)
+			if (!ddp_bytes) {
+				dev_kfree_skb_any(skb);
 				goto next_desc;
+			}
 		}
 #endif /* IXGBE_FCOE */
 		ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
@@ -1522,7 +1537,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *, int);
 static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_q_vector *q_vector;
-	int i, q_vectors, v_idx, r_idx;
+	int q_vectors, v_idx;
 	u32 mask;
 
 	q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
@@ -1532,33 +1547,19 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 	 * corresponding register.
 	 */
 	for (v_idx = 0; v_idx < q_vectors; v_idx++) {
+		struct ixgbe_ring *ring;
 		q_vector = adapter->q_vector[v_idx];
-		/* XXX for_each_set_bit(...) */
-		r_idx = find_first_bit(q_vector->rx.idx,
-				       adapter->num_rx_queues);
-
-		for (i = 0; i < q_vector->rx.count; i++) {
-			u8 reg_idx = adapter->rx_ring[r_idx]->reg_idx;
-			ixgbe_set_ivar(adapter, 0, reg_idx, v_idx);
-			r_idx = find_next_bit(q_vector->rx.idx,
-					      adapter->num_rx_queues,
-					      r_idx + 1);
-		}
-		r_idx = find_first_bit(q_vector->tx.idx,
-				       adapter->num_tx_queues);
-
-		for (i = 0; i < q_vector->tx.count; i++) {
-			u8 reg_idx = adapter->tx_ring[r_idx]->reg_idx;
-			ixgbe_set_ivar(adapter, 1, reg_idx, v_idx);
-			r_idx = find_next_bit(q_vector->tx.idx,
-					      adapter->num_tx_queues,
-					      r_idx + 1);
-		}
 
-		if (q_vector->tx.count && !q_vector->rx.count)
+		for (ring = q_vector->rx.ring; ring != NULL; ring = ring->next)
+			ixgbe_set_ivar(adapter, 0, ring->reg_idx, v_idx);
+
+		for (ring = q_vector->tx.ring; ring != NULL; ring = ring->next)
+			ixgbe_set_ivar(adapter, 1, ring->reg_idx, v_idx);
+
+		if (q_vector->tx.ring && !q_vector->rx.ring)
 			/* tx only */
 			q_vector->eitr = adapter->tx_eitr_param;
-		else if (q_vector->rx.count)
+		else if (q_vector->rx.ring)
 			/* rx or mixed */
 			q_vector->eitr = adapter->rx_eitr_param;
 
@@ -1982,20 +1983,10 @@ static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
 static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
 {
 	struct ixgbe_q_vector *q_vector = data;
-	struct ixgbe_adapter  *adapter = q_vector->adapter;
-	struct ixgbe_ring     *tx_ring;
-	int i, r_idx;
 
 	if (!q_vector->tx.count)
 		return IRQ_HANDLED;
 
-	r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
-	for (i = 0; i < q_vector->tx.count; i++) {
-		tx_ring = adapter->tx_ring[r_idx];
-		r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
-				      r_idx + 1);
-	}
-
 	/* EIAM disabled interrupts (on this vector) for us */
 	napi_schedule(&q_vector->napi);
 
@@ -2010,22 +2001,6 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
 static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 {
 	struct ixgbe_q_vector *q_vector = data;
-	struct ixgbe_adapter  *adapter = q_vector->adapter;
-	struct ixgbe_ring  *rx_ring;
-	int r_idx;
-	int i;
-
-#ifdef CONFIG_IXGBE_DCA
-	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-		ixgbe_update_dca(q_vector);
-#endif
-
-	r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
-	for (i = 0; i < q_vector->rx.count; i++) {
-		rx_ring = adapter->rx_ring[r_idx];
-		r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
-				      r_idx + 1);
-	}
 
 	if (!q_vector->rx.count)
 		return IRQ_HANDLED;
@@ -2039,28 +2014,10 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
 {
 	struct ixgbe_q_vector *q_vector = data;
-	struct ixgbe_adapter  *adapter = q_vector->adapter;
-	struct ixgbe_ring  *ring;
-	int r_idx;
-	int i;
 
 	if (!q_vector->tx.count && !q_vector->rx.count)
 		return IRQ_HANDLED;
 
-	r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
-	for (i = 0; i < q_vector->tx.count; i++) {
-		ring = adapter->tx_ring[r_idx];
-		r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
-				      r_idx + 1);
-	}
-
-	r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
-	for (i = 0; i < q_vector->rx.count; i++) {
-		ring = adapter->rx_ring[r_idx];
-		r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
-				      r_idx + 1);
-	}
-
 	/* EIAM disabled interrupts (on this vector) for us */
 	napi_schedule(&q_vector->napi);
 
@@ -2080,19 +2037,14 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
 	struct ixgbe_q_vector *q_vector =
 			       container_of(napi, struct ixgbe_q_vector, napi);
 	struct ixgbe_adapter *adapter = q_vector->adapter;
-	struct ixgbe_ring *rx_ring = NULL;
 	int work_done = 0;
-	long r_idx;
 
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 		ixgbe_update_dca(q_vector);
 #endif
 
-	r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
-	rx_ring = adapter->rx_ring[r_idx];
-
-	ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
+	ixgbe_clean_rx_irq(q_vector, q_vector->rx.ring, &work_done, budget);
 
 	/* If all Rx work done, exit the polling mode */
 	if (work_done < budget) {
@@ -2120,38 +2072,29 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 	struct ixgbe_q_vector *q_vector =
 			       container_of(napi, struct ixgbe_q_vector, napi);
 	struct ixgbe_adapter *adapter = q_vector->adapter;
-	struct ixgbe_ring *ring = NULL;
-	int work_done = 0, i;
-	long r_idx;
-	bool tx_clean_complete = true;
+	struct ixgbe_ring *ring;
+	int work_done = 0;
+	bool clean_complete = true;
 
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 		ixgbe_update_dca(q_vector);
 #endif
 
-	r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
-	for (i = 0; i < q_vector->tx.count; i++) {
-		ring = adapter->tx_ring[r_idx];
-		tx_clean_complete &= ixgbe_clean_tx_irq(q_vector, ring);
-		r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
-				      r_idx + 1);
-	}
+	for (ring = q_vector->tx.ring; ring != NULL; ring = ring->next)
+		clean_complete &= ixgbe_clean_tx_irq(q_vector, ring);
 
 	/* attempt to distribute budget to each queue fairly, but don't allow
 	 * the budget to go below 1 because we'll exit polling */
 	budget /= (q_vector->rx.count ?: 1);
 	budget = max(budget, 1);
-	r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
-	for (i = 0; i < q_vector->rx.count; i++) {
-		ring = adapter->rx_ring[r_idx];
+
+	for (ring = q_vector->rx.ring; ring != NULL; ring = ring->next)
 		ixgbe_clean_rx_irq(q_vector, ring, &work_done, budget);
-		r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
-				      r_idx + 1);
-	}
 
-	r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
-	ring = adapter->rx_ring[r_idx];
+	if (!clean_complete)
+		work_done = budget;
+
 	/* If all Rx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
@@ -2179,32 +2122,23 @@ static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
 	struct ixgbe_q_vector *q_vector =
 			       container_of(napi, struct ixgbe_q_vector, napi);
 	struct ixgbe_adapter *adapter = q_vector->adapter;
-	struct ixgbe_ring *tx_ring = NULL;
-	int work_done = 0;
-	long r_idx;
 
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 		ixgbe_update_dca(q_vector);
 #endif
 
-	r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
-	tx_ring = adapter->tx_ring[r_idx];
-
-	if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
-		work_done = budget;
+	if (!ixgbe_clean_tx_irq(q_vector, q_vector->tx.ring))
+		return budget;
 
 	/* If all Tx work done, exit the polling mode */
-	if (work_done < budget) {
-		napi_complete(napi);
-		if (adapter->tx_itr_setting & 1)
-			ixgbe_set_itr(q_vector);
-		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			ixgbe_irq_enable_queues(adapter,
-						((u64)1 << q_vector->v_idx));
-	}
+	napi_complete(napi);
+	if (adapter->tx_itr_setting & 1)
+		ixgbe_set_itr(q_vector);
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
 
-	return work_done;
+	return 0;
 }
 
 static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
@@ -2213,9 +2147,10 @@ static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
 	struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
 	struct ixgbe_ring *rx_ring = a->rx_ring[r_idx];
 
-	set_bit(r_idx, q_vector->rx.idx);
-	q_vector->rx.count++;
 	rx_ring->q_vector = q_vector;
+	rx_ring->next = q_vector->rx.ring;
+	q_vector->rx.ring = rx_ring;
+	q_vector->rx.count++;
 }
 
 static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
@@ -2224,9 +2159,10 @@ static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
 	struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
 	struct ixgbe_ring *tx_ring = a->tx_ring[t_idx];
 
-	set_bit(t_idx, q_vector->tx.idx);
-	q_vector->tx.count++;
 	tx_ring->q_vector = q_vector;
+	tx_ring->next = q_vector->tx.ring;
+	q_vector->tx.ring = tx_ring;
+	q_vector->tx.count++;
 	q_vector->tx.work_limit = a->tx_work_limit;
 }
 
@@ -2484,14 +2420,26 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 
 static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter)
 {
-	int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+	int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+	int i;
+
+	/* legacy and MSI only use one vector */
+	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+		q_vectors = 1;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		adapter->rx_ring[i]->q_vector = NULL;
+		adapter->rx_ring[i]->next = NULL;
+	}
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		adapter->tx_ring[i]->q_vector = NULL;
+		adapter->tx_ring[i]->next = NULL;
+	}
 
 	for (i = 0; i < q_vectors; i++) {
 		struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
-		bitmap_zero(q_vector->rx.idx, MAX_RX_QUEUES);
-		bitmap_zero(q_vector->tx.idx, MAX_TX_QUEUES);
-		q_vector->rx.count = 0;
-		q_vector->tx.count = 0;
+		memset(&q_vector->rx, 0, sizeof(struct ixgbe_ring_container));
+		memset(&q_vector->tx, 0, sizeof(struct ixgbe_ring_container));
 	}
 }
 
@@ -3593,7 +3541,7 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 
 	/* reconfigure the hardware */
 	if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) {
-#ifdef CONFIG_FCOE
+#ifdef IXGBE_FCOE
 		if (adapter->netdev->features & NETIF_F_FCOE_MTU)
 			max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
 #endif
@@ -4533,7 +4481,7 @@ static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
 		break;
 	case ixgbe_mac_82599EB:
 	case ixgbe_mac_X540:
-		if (num_tcs == 8) {
+		if (num_tcs > 4) {
 			if (tc < 3) {
 				*tx = tc << 5;
 				*rx = tc << 4;
@@ -4544,7 +4492,7 @@ static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
 				*tx = ((tc + 8) << 3);
 				*rx = tc << 4;
 			}
-		} else if (num_tcs == 4) {
+		} else {
 			*rx =  tc << 5;
 			switch (tc) {
 			case 0:
@@ -5899,7 +5847,7 @@ static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
 		/* get one bit for every active tx/rx interrupt vector */
 		for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
 			struct ixgbe_q_vector *qv = adapter->q_vector[i];
-			if (qv->rx.count || qv->tx.count)
+			if (qv->rx.ring || qv->tx.ring)
 				eics |= ((u64)1 << i);
 		}
 	}
@@ -6347,7 +6295,8 @@ static bool ixgbe_tx_csum(struct ixgbe_ring *tx_ring,
 	u32 type_tucmd = 0;
 
 	if (skb->ip_summed != CHECKSUM_PARTIAL) {
-	    if (!(tx_flags & IXGBE_TX_FLAGS_VLAN))
+	    if (!(tx_flags & IXGBE_TX_FLAGS_HW_VLAN) &&
+		!(tx_flags & IXGBE_TX_FLAGS_TXSW))
 			return false;
 	} else {
 		u8 l4_hdr = 0;
@@ -6404,185 +6353,186 @@ static bool ixgbe_tx_csum(struct ixgbe_ring *tx_ring,
 	return (skb->ip_summed == CHECKSUM_PARTIAL);
 }
 
-static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
-			struct ixgbe_ring *tx_ring,
-			struct sk_buff *skb, u32 tx_flags,
-			unsigned int first, const u8 hdr_len)
+static __le32 ixgbe_tx_cmd_type(u32 tx_flags)
 {
-	struct device *dev = tx_ring->dev;
-	struct ixgbe_tx_buffer *tx_buffer_info;
-	unsigned int len;
-	unsigned int total = skb->len;
-	unsigned int offset = 0, size, count = 0;
-	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
-	unsigned int f;
-	unsigned int bytecount = skb->len;
-	u16 gso_segs = 1;
-	u16 i;
+	/* set type for advanced descriptor with frame checksum insertion */
+	__le32 cmd_type = cpu_to_le32(IXGBE_ADVTXD_DTYP_DATA |
+				      IXGBE_ADVTXD_DCMD_IFCS |
+				      IXGBE_ADVTXD_DCMD_DEXT);
 
-	i = tx_ring->next_to_use;
+	/* set HW vlan bit if vlan is present */
+	if (tx_flags & IXGBE_TX_FLAGS_HW_VLAN)
+		cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_VLE);
 
-	if (tx_flags & IXGBE_TX_FLAGS_FCOE)
-		/* excluding fcoe_crc_eof for FCoE */
-		total -= sizeof(struct fcoe_crc_eof);
+	/* set segmentation enable bits for TSO/FSO */
+#ifdef IXGBE_FCOE
+	if ((tx_flags & IXGBE_TX_FLAGS_TSO) || (tx_flags & IXGBE_TX_FLAGS_FSO))
+#else
+	if (tx_flags & IXGBE_TX_FLAGS_TSO)
+#endif
+		cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_TSE);
 
-	len = min(skb_headlen(skb), total);
-	while (len) {
-		tx_buffer_info = &tx_ring->tx_buffer_info[i];
-		size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
-
-		tx_buffer_info->length = size;
-		tx_buffer_info->mapped_as_page = false;
-		tx_buffer_info->dma = dma_map_single(dev,
-						     skb->data + offset,
-						     size, DMA_TO_DEVICE);
-		if (dma_mapping_error(dev, tx_buffer_info->dma))
-			goto dma_error;
-		tx_buffer_info->time_stamp = jiffies;
-		tx_buffer_info->next_to_watch = i;
+	return cmd_type;
+}
 
-		len -= size;
-		total -= size;
-		offset += size;
-		count++;
+static __le32 ixgbe_tx_olinfo_status(u32 tx_flags, unsigned int paylen)
+{
+	__le32 olinfo_status =
+		cpu_to_le32(paylen << IXGBE_ADVTXD_PAYLEN_SHIFT);
 
-		if (len) {
-			i++;
-			if (i == tx_ring->count)
-				i = 0;
-		}
+	if (tx_flags & IXGBE_TX_FLAGS_TSO) {
+		olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_TXSM |
+					    (1 << IXGBE_ADVTXD_IDX_SHIFT));
+		/* enble IPv4 checksum for TSO */
+		if (tx_flags & IXGBE_TX_FLAGS_IPV4)
+			olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_IXSM);
 	}
 
-	for (f = 0; f < nr_frags; f++) {
-		struct skb_frag_struct *frag;
-
-		frag = &skb_shinfo(skb)->frags[f];
-		len = min((unsigned int)frag->size, total);
-		offset = frag->page_offset;
-
-		while (len) {
-			i++;
-			if (i == tx_ring->count)
-				i = 0;
+	/* enable L4 checksum for TSO and TX checksum offload */
+	if (tx_flags & IXGBE_TX_FLAGS_CSUM)
+		olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_TXSM);
 
-			tx_buffer_info = &tx_ring->tx_buffer_info[i];
-			size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
-
-			tx_buffer_info->length = size;
-			tx_buffer_info->dma = dma_map_page(dev,
-							   frag->page,
-							   offset, size,
-							   DMA_TO_DEVICE);
-			tx_buffer_info->mapped_as_page = true;
-			if (dma_mapping_error(dev, tx_buffer_info->dma))
-				goto dma_error;
-			tx_buffer_info->time_stamp = jiffies;
-			tx_buffer_info->next_to_watch = i;
-
-			len -= size;
-			total -= size;
-			offset += size;
-			count++;
-		}
-		if (total == 0)
-			break;
-	}
-
-	if (tx_flags & IXGBE_TX_FLAGS_TSO)
-		gso_segs = skb_shinfo(skb)->gso_segs;
 #ifdef IXGBE_FCOE
-	/* adjust for FCoE Sequence Offload */
-	else if (tx_flags & IXGBE_TX_FLAGS_FSO)
-		gso_segs = DIV_ROUND_UP(skb->len - hdr_len,
-					skb_shinfo(skb)->gso_size);
-#endif /* IXGBE_FCOE */
-	bytecount += (gso_segs - 1) * hdr_len;
+	/* use index 1 context for FCOE/FSO */
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE)
+		olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_CC |
+					    (1 << IXGBE_ADVTXD_IDX_SHIFT));
 
-	/* multiply data chunks by size of headers */
-	tx_ring->tx_buffer_info[i].bytecount = bytecount;
-	tx_ring->tx_buffer_info[i].gso_segs = gso_segs;
-	tx_ring->tx_buffer_info[i].skb = skb;
-	tx_ring->tx_buffer_info[first].next_to_watch = i;
+#endif
+	/*
+	 * Check Context must be set if Tx switch is enabled, which it
+	 * always is for case where virtual functions are running
+	 */
+	if (tx_flags & IXGBE_TX_FLAGS_TXSW)
+		olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_CC);
 
-	return count;
+	return olinfo_status;
+}
 
-dma_error:
-	e_dev_err("TX DMA map failed\n");
+#define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \
+		       IXGBE_TXD_CMD_RS)
 
-	/* clear timestamp and dma mappings for failed tx_buffer_info map */
-	tx_buffer_info->dma = 0;
-	tx_buffer_info->time_stamp = 0;
-	tx_buffer_info->next_to_watch = 0;
-	if (count)
-		count--;
+static void ixgbe_tx_map(struct ixgbe_ring *tx_ring,
+			 struct sk_buff *skb,
+			 struct ixgbe_tx_buffer *first,
+			 u32 tx_flags,
+			 const u8 hdr_len)
+{
+	struct device *dev = tx_ring->dev;
+	struct ixgbe_tx_buffer *tx_buffer_info;
+	union ixgbe_adv_tx_desc *tx_desc;
+	dma_addr_t dma;
+	__le32 cmd_type, olinfo_status;
+	struct skb_frag_struct *frag;
+	unsigned int f = 0;
+	unsigned int data_len = skb->data_len;
+	unsigned int size = skb_headlen(skb);
+	u32 offset = 0;
+	u32 paylen = skb->len - hdr_len;
+	u16 i = tx_ring->next_to_use;
+	u16 gso_segs;
 
-	/* clear timestamp and dma mappings for remaining portion of packet */
-	while (count--) {
-		if (i == 0)
-			i += tx_ring->count;
-		i--;
-		tx_buffer_info = &tx_ring->tx_buffer_info[i];
-		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+#ifdef IXGBE_FCOE
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
+		if (data_len >= sizeof(struct fcoe_crc_eof)) {
+			data_len -= sizeof(struct fcoe_crc_eof);
+		} else {
+			size -= sizeof(struct fcoe_crc_eof) - data_len;
+			data_len = 0;
+		}
 	}
 
-	return 0;
-}
+#endif
+	dma = dma_map_single(dev, skb->data, size, DMA_TO_DEVICE);
+	if (dma_mapping_error(dev, dma))
+		goto dma_error;
 
-static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
-			   int tx_flags, int count, u32 paylen, u8 hdr_len)
-{
-	union ixgbe_adv_tx_desc *tx_desc = NULL;
-	struct ixgbe_tx_buffer *tx_buffer_info;
-	u32 olinfo_status = 0, cmd_type_len = 0;
-	unsigned int i;
-	u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS;
+	cmd_type = ixgbe_tx_cmd_type(tx_flags);
+	olinfo_status = ixgbe_tx_olinfo_status(tx_flags, paylen);
 
-	cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA;
+	tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
 
-	cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT;
+	for (;;) {
+		while (size > IXGBE_MAX_DATA_PER_TXD) {
+			tx_desc->read.buffer_addr = cpu_to_le64(dma + offset);
+			tx_desc->read.cmd_type_len =
+				cmd_type | cpu_to_le32(IXGBE_MAX_DATA_PER_TXD);
+			tx_desc->read.olinfo_status = olinfo_status;
 
-	if (tx_flags & IXGBE_TX_FLAGS_VLAN)
-		cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
+			offset += IXGBE_MAX_DATA_PER_TXD;
+			size -= IXGBE_MAX_DATA_PER_TXD;
 
-	if (tx_flags & IXGBE_TX_FLAGS_TSO) {
-		cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
+			tx_desc++;
+			i++;
+			if (i == tx_ring->count) {
+				tx_desc = IXGBE_TX_DESC_ADV(tx_ring, 0);
+				i = 0;
+			}
+		}
 
-		olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
-				 IXGBE_ADVTXD_POPTS_SHIFT;
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		tx_buffer_info->length = offset + size;
+		tx_buffer_info->tx_flags = tx_flags;
+		tx_buffer_info->dma = dma;
 
-		/* use index 1 context for tso */
-		olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
-		if (tx_flags & IXGBE_TX_FLAGS_IPV4)
-			olinfo_status |= IXGBE_TXD_POPTS_IXSM <<
-					 IXGBE_ADVTXD_POPTS_SHIFT;
+		tx_desc->read.buffer_addr = cpu_to_le64(dma + offset);
+		tx_desc->read.cmd_type_len = cmd_type | cpu_to_le32(size);
+		tx_desc->read.olinfo_status = olinfo_status;
 
-	} else if (tx_flags & IXGBE_TX_FLAGS_CSUM)
-		olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
-				 IXGBE_ADVTXD_POPTS_SHIFT;
+		if (!data_len)
+			break;
 
-	if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
-		olinfo_status |= IXGBE_ADVTXD_CC;
-		olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
-		if (tx_flags & IXGBE_TX_FLAGS_FSO)
-			cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
-	}
+		frag = &skb_shinfo(skb)->frags[f];
+#ifdef IXGBE_FCOE
+		size = min_t(unsigned int, data_len, frag->size);
+#else
+		size = frag->size;
+#endif
+		data_len -= size;
+		f++;
 
-	olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
+		offset = 0;
+		tx_flags |= IXGBE_TX_FLAGS_MAPPED_AS_PAGE;
 
-	i = tx_ring->next_to_use;
-	while (count--) {
-		tx_buffer_info = &tx_ring->tx_buffer_info[i];
-		tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
-		tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma);
-		tx_desc->read.cmd_type_len =
-			cpu_to_le32(cmd_type_len | tx_buffer_info->length);
-		tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+		dma = dma_map_page(dev, frag->page, frag->page_offset,
+				   size, DMA_TO_DEVICE);
+		if (dma_mapping_error(dev, dma))
+			goto dma_error;
+
+		tx_desc++;
 		i++;
-		if (i == tx_ring->count)
+		if (i == tx_ring->count) {
+			tx_desc = IXGBE_TX_DESC_ADV(tx_ring, 0);
 			i = 0;
+		}
 	}
 
-	tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd);
+	tx_desc->read.cmd_type_len |= cpu_to_le32(IXGBE_TXD_CMD);
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+
+	tx_ring->next_to_use = i;
+
+	if (tx_flags & IXGBE_TX_FLAGS_TSO)
+		gso_segs = skb_shinfo(skb)->gso_segs;
+#ifdef IXGBE_FCOE
+	/* adjust for FCoE Sequence Offload */
+	else if (tx_flags & IXGBE_TX_FLAGS_FSO)
+		gso_segs = DIV_ROUND_UP(skb->len - hdr_len,
+					skb_shinfo(skb)->gso_size);
+#endif /* IXGBE_FCOE */
+	else
+		gso_segs = 1;
+
+	/* multiply data chunks by size of headers */
+	tx_buffer_info->bytecount = paylen + (gso_segs * hdr_len);
+	tx_buffer_info->gso_segs = gso_segs;
+	tx_buffer_info->skb = skb;
+
+	/* set the timestamp */
+	first->time_stamp = jiffies;
 
 	/*
 	 * Force memory writes to complete before letting h/w
@@ -6592,8 +6542,30 @@ static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
 	 */
 	wmb();
 
-	tx_ring->next_to_use = i;
+	/* set next_to_watch value indicating a packet is present */
+	first->next_to_watch = tx_desc;
+
+	/* notify HW of packet */
 	writel(i, tx_ring->tail);
+
+	return;
+dma_error:
+	dev_err(dev, "TX DMA map failed\n");
+
+	/* clear dma mappings for failed tx_buffer_info map */
+	for (;;) {
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		ixgbe_unmap_tx_resource(tx_ring, tx_buffer_info);
+		if (tx_buffer_info == first)
+			break;
+		if (i == 0)
+			i = tx_ring->count;
+		i--;
+	}
+
+	dev_kfree_skb_any(skb);
+
+	tx_ring->next_to_use = i;
 }
 
 static void ixgbe_atr(struct ixgbe_ring *ring, struct sk_buff *skb,
@@ -6632,8 +6604,8 @@ static void ixgbe_atr(struct ixgbe_ring *ring, struct sk_buff *skb,
 
 	th = tcp_hdr(skb);
 
-	/* skip this packet since the socket is closing */
-	if (th->fin)
+	/* skip this packet since it is invalid or the socket is closing */
+	if (!th || th->fin)
 		return;
 
 	/* sample on all syn packets or once every atr sample count */
@@ -6658,7 +6630,7 @@ static void ixgbe_atr(struct ixgbe_ring *ring, struct sk_buff *skb,
 	 * since src port and flex bytes occupy the same word XOR them together
 	 * and write the value to source port portion of compressed dword
 	 */
-	if (vlan_id)
+	if (tx_flags & (IXGBE_TX_FLAGS_SW_VLAN | IXGBE_TX_FLAGS_HW_VLAN))
 		common.port.src ^= th->dest ^ __constant_htons(ETH_P_8021Q);
 	else
 		common.port.src ^= th->dest ^ protocol;
@@ -6740,14 +6712,14 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 			  struct ixgbe_adapter *adapter,
 			  struct ixgbe_ring *tx_ring)
 {
+	struct ixgbe_tx_buffer *first;
 	int tso;
-	u32  tx_flags = 0;
+	u32 tx_flags = 0;
 #if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD
 	unsigned short f;
 #endif
-	u16 first;
 	u16 count = TXD_USE_COUNT(skb_headlen(skb));
-	__be16 protocol;
+	__be16 protocol = skb->protocol;
 	u8 hdr_len = 0;
 
 	/*
@@ -6768,68 +6740,88 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 		return NETDEV_TX_BUSY;
 	}
 
-	protocol = vlan_get_protocol(skb);
+#ifdef CONFIG_PCI_IOV
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		tx_flags |= IXGBE_TX_FLAGS_TXSW;
 
+#endif
+	/* if we have a HW VLAN tag being added default to the HW one */
 	if (vlan_tx_tag_present(skb)) {
-		tx_flags |= vlan_tx_tag_get(skb);
-		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-			tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK;
-			tx_flags |= tx_ring->dcb_tc << 13;
+		tx_flags |= vlan_tx_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= IXGBE_TX_FLAGS_HW_VLAN;
+	/* else if it is a SW VLAN check the next protocol and store the tag */
+	} else if (protocol == __constant_htons(ETH_P_8021Q)) {
+		struct vlan_hdr *vhdr, _vhdr;
+		vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
+		if (!vhdr)
+			goto out_drop;
+
+		protocol = vhdr->h_vlan_encapsulated_proto;
+		tx_flags |= ntohs(vhdr->h_vlan_TCI) << IXGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= IXGBE_TX_FLAGS_SW_VLAN;
+	}
+
+	if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) &&
+	    ((tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | IXGBE_TX_FLAGS_SW_VLAN)) ||
+	     (skb->priority != TC_PRIO_CONTROL))) {
+		tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK;
+		tx_flags |= tx_ring->dcb_tc <<
+			    IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT;
+		if (tx_flags & IXGBE_TX_FLAGS_SW_VLAN) {
+			struct vlan_ethhdr *vhdr;
+			if (skb_header_cloned(skb) &&
+			    pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
+				goto out_drop;
+			vhdr = (struct vlan_ethhdr *)skb->data;
+			vhdr->h_vlan_TCI = htons(tx_flags >>
+						 IXGBE_TX_FLAGS_VLAN_SHIFT);
+		} else {
+			tx_flags |= IXGBE_TX_FLAGS_HW_VLAN;
 		}
-		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
-		tx_flags |= IXGBE_TX_FLAGS_VLAN;
-	} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED &&
-		   skb->priority != TC_PRIO_CONTROL) {
-		tx_flags |= tx_ring->dcb_tc << 13;
-		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
-		tx_flags |= IXGBE_TX_FLAGS_VLAN;
 	}
 
-#ifdef IXGBE_FCOE
-	/* for FCoE with DCB, we force the priority to what
-	 * was specified by the switch */
-	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED &&
-	    (protocol == htons(ETH_P_FCOE)))
-		tx_flags |= IXGBE_TX_FLAGS_FCOE;
-
-#endif
 	/* record the location of the first descriptor for this packet */
-	first = tx_ring->next_to_use;
+	first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
 
-	if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
 #ifdef IXGBE_FCOE
-		/* setup tx offload for FCoE */
+	/* setup tx offload for FCoE */
+	if ((protocol == __constant_htons(ETH_P_FCOE)) &&
+	    (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) {
 		tso = ixgbe_fso(tx_ring, skb, tx_flags, &hdr_len);
 		if (tso < 0)
 			goto out_drop;
 		else if (tso)
-			tx_flags |= IXGBE_TX_FLAGS_FSO;
-#endif /* IXGBE_FCOE */
-	} else {
-		if (protocol == htons(ETH_P_IP))
-			tx_flags |= IXGBE_TX_FLAGS_IPV4;
-		tso = ixgbe_tso(tx_ring, skb, tx_flags, protocol, &hdr_len);
-		if (tso < 0)
-			goto out_drop;
-		else if (tso)
-			tx_flags |= IXGBE_TX_FLAGS_TSO;
-		else if (ixgbe_tx_csum(tx_ring, skb, tx_flags, protocol))
-			tx_flags |= IXGBE_TX_FLAGS_CSUM;
+			tx_flags |= IXGBE_TX_FLAGS_FSO |
+				    IXGBE_TX_FLAGS_FCOE;
+		else
+			tx_flags |= IXGBE_TX_FLAGS_FCOE;
+
+		goto xmit_fcoe;
 	}
 
-	count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first, hdr_len);
-	if (count) {
-		/* add the ATR filter if ATR is on */
-		if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state))
-			ixgbe_atr(tx_ring, skb, tx_flags, protocol);
-		ixgbe_tx_queue(tx_ring, tx_flags, count, skb->len, hdr_len);
-		ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED);
+#endif /* IXGBE_FCOE */
+	/* setup IPv4/IPv6 offloads */
+	if (protocol == __constant_htons(ETH_P_IP))
+		tx_flags |= IXGBE_TX_FLAGS_IPV4;
 
-	} else {
-		tx_ring->tx_buffer_info[first].time_stamp = 0;
-		tx_ring->next_to_use = first;
+	tso = ixgbe_tso(tx_ring, skb, tx_flags, protocol, &hdr_len);
+	if (tso < 0)
 		goto out_drop;
-	}
+	else if (tso)
+		tx_flags |= IXGBE_TX_FLAGS_TSO;
+	else if (ixgbe_tx_csum(tx_ring, skb, tx_flags, protocol))
+		tx_flags |= IXGBE_TX_FLAGS_CSUM;
+
+	/* add the ATR filter if ATR is on */
+	if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state))
+		ixgbe_atr(tx_ring, skb, tx_flags, protocol);
+
+#ifdef IXGBE_FCOE
+xmit_fcoe:
+#endif /* IXGBE_FCOE */
+	ixgbe_tx_map(tx_ring, skb, first, tx_flags, hdr_len);
+
+	ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED);
 
 	return NETDEV_TX_OK;
 
@@ -7073,11 +7065,11 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc)
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	struct ixgbe_hw *hw = &adapter->hw;
 
-	/* If DCB is anabled do not remove traffic classes, multiple
-	 * traffic classes are required to implement DCB
-	 */
-	if (!tc && (adapter->flags & IXGBE_FLAG_DCB_ENABLED))
-		return 0;
+	/* Multiple traffic classes requires multiple queues */
+	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+		e_err(drv, "Enable failed, needs MSI-X\n");
+		return -EINVAL;
+	}
 
 	/* Hardware supports up to 8 traffic classes */
 	if (tc > MAX_TRAFFIC_CLASS ||
@@ -7092,11 +7084,27 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc)
 		ixgbe_close(dev);
 	ixgbe_clear_interrupt_scheme(adapter);
 
-	if (tc)
+	if (tc) {
 		netdev_set_num_tc(dev, tc);
-	else
+		adapter->last_lfc_mode = adapter->hw.fc.current_mode;
+
+		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
+		adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+			adapter->hw.fc.requested_mode = ixgbe_fc_none;
+	} else {
 		netdev_reset_tc(dev);
 
+		adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+
+		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+		adapter->temp_dcb_cfg.pfc_mode_enable = false;
+		adapter->dcb_cfg.pfc_mode_enable = false;
+	}
+
 	ixgbe_init_interrupt_scheme(adapter);
 	ixgbe_validate_rtr(adapter, tc);
 	if (netif_running(dev))
@@ -7203,7 +7211,6 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_start_xmit		= ixgbe_xmit_frame,
 	.ndo_select_queue	= ixgbe_select_queue,
 	.ndo_set_rx_mode        = ixgbe_set_rx_mode,
-	.ndo_set_multicast_list	= ixgbe_set_rx_mode,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ixgbe_set_mac,
 	.ndo_change_mtu		= ixgbe_change_mtu,
@@ -7503,7 +7510,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 			   NETIF_F_HW_VLAN_FILTER |
 			   NETIF_F_TSO |
 			   NETIF_F_TSO6 |
-			   NETIF_F_GRO |
 			   NETIF_F_RXHASH |
 			   NETIF_F_RXCSUM;
 
@@ -7526,6 +7532,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->vlan_features |= NETIF_F_IPV6_CSUM;
 	netdev->vlan_features |= NETIF_F_SG;
 
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
 	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
 		adapter->flags &= ~(IXGBE_FLAG_RSS_ENABLED |
 				    IXGBE_FLAG_DCB_ENABLED);
diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
index 1ff0eefcfd0a..1ff0eefcfd0a 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
diff --git a/drivers/net/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
index b239bdac38da..b239bdac38da 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 735f686c3b36..f7ca3511b9fe 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -1585,6 +1585,7 @@ static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
 	*i2cctl |= IXGBE_I2C_CLK_OUT;
 
 	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
 
 	/* SCL rise time (1000ns) */
 	udelay(IXGBE_I2C_T_RISE);
@@ -1605,6 +1606,7 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
 	*i2cctl &= ~IXGBE_I2C_CLK_OUT;
 
 	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
 
 	/* SCL fall time (300ns) */
 	udelay(IXGBE_I2C_T_FALL);
@@ -1628,6 +1630,7 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
 		*i2cctl &= ~IXGBE_I2C_DATA_OUT;
 
 	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
 
 	/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
 	udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 197bdd13106a..197bdd13106a 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index d99d01e21326..d99d01e21326 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
diff --git a/drivers/net/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
index 34175564bb78..34175564bb78 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index e0d970ebab7a..9f618ee7d333 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1834,6 +1834,7 @@ enum {
 #define IXGBE_MFLCN_DPF         0x00000002 /* Discard Pause Frame */
 #define IXGBE_MFLCN_RPFCE       0x00000004 /* Receive Priority FC Enable */
 #define IXGBE_MFLCN_RFCE        0x00000008 /* Receive FC Enable */
+#define IXGBE_MFLCN_RPFCE_MASK	0x00000FE0 /* Receive FC Mask */
 
 #define IXGBE_MFLCN_RPFCE_SHIFT		 4
 
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index bec30ed91adc..2696c78e9f46 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -162,6 +162,7 @@ mac_reset_top:
 	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
 	ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
 	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+	IXGBE_WRITE_FLUSH(hw);
 
 	msleep(50);
 
diff --git a/drivers/net/ixgbevf/Makefile b/drivers/net/ethernet/intel/ixgbevf/Makefile
index 1f35d229e71a..1f35d229e71a 100644
--- a/drivers/net/ixgbevf/Makefile
+++ b/drivers/net/ethernet/intel/ixgbevf/Makefile
diff --git a/drivers/net/ixgbevf/defines.h b/drivers/net/ethernet/intel/ixgbevf/defines.h
index 78abb6f1a866..78abb6f1a866 100644
--- a/drivers/net/ixgbevf/defines.h
+++ b/drivers/net/ethernet/intel/ixgbevf/defines.h
diff --git a/drivers/net/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
index deee3754b1f7..e1d9e3b63448 100644
--- a/drivers/net/ixgbevf/ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
@@ -117,44 +117,6 @@ static int ixgbevf_get_settings(struct net_device *netdev,
 	return 0;
 }
 
-static u32 ixgbevf_get_rx_csum(struct net_device *netdev)
-{
-	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-	return adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED;
-}
-
-static int ixgbevf_set_rx_csum(struct net_device *netdev, u32 data)
-{
-	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-	if (data)
-		adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
-	else
-		adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED;
-
-	if (netif_running(netdev)) {
-		if (!adapter->dev_closed)
-			ixgbevf_reinit_locked(adapter);
-	} else {
-		ixgbevf_reset(adapter);
-	}
-
-	return 0;
-}
-
-static int ixgbevf_set_tso(struct net_device *netdev, u32 data)
-{
-	if (data) {
-		netdev->features |= NETIF_F_TSO;
-		netdev->features |= NETIF_F_TSO6;
-	} else {
-		netif_tx_stop_all_queues(netdev);
-		netdev->features &= ~NETIF_F_TSO;
-		netdev->features &= ~NETIF_F_TSO6;
-		netif_tx_start_all_queues(netdev);
-	}
-	return 0;
-}
-
 static u32 ixgbevf_get_msglevel(struct net_device *netdev)
 {
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
@@ -720,16 +682,8 @@ static struct ethtool_ops ixgbevf_ethtool_ops = {
 	.get_link               = ethtool_op_get_link,
 	.get_ringparam          = ixgbevf_get_ringparam,
 	.set_ringparam          = ixgbevf_set_ringparam,
-	.get_rx_csum            = ixgbevf_get_rx_csum,
-	.set_rx_csum            = ixgbevf_set_rx_csum,
-	.get_tx_csum            = ethtool_op_get_tx_csum,
-	.set_tx_csum            = ethtool_op_set_tx_ipv6_csum,
-	.get_sg                 = ethtool_op_get_sg,
-	.set_sg                 = ethtool_op_set_sg,
 	.get_msglevel           = ixgbevf_get_msglevel,
 	.set_msglevel           = ixgbevf_set_msglevel,
-	.get_tso                = ethtool_op_get_tso,
-	.set_tso                = ixgbevf_set_tso,
 	.self_test              = ixgbevf_diag_test,
 	.get_sset_count         = ixgbevf_get_sset_count,
 	.get_strings            = ixgbevf_get_strings,
diff --git a/drivers/net/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index 8857df4dd3b9..e6c9d1a927a9 100644
--- a/drivers/net/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -34,6 +34,7 @@
 #include <linux/io.h>
 #include <linux/netdevice.h>
 #include <linux/if_vlan.h>
+#include <linux/u64_stats_sync.h>
 
 #include "vf.h"
 
@@ -71,12 +72,13 @@ struct ixgbevf_ring {
 		struct ixgbevf_rx_buffer *rx_buffer_info;
 	};
 
+	u64			total_bytes;
+	u64			total_packets;
+	struct u64_stats_sync	syncp;
+
 	u16 head;
 	u16 tail;
 
-	unsigned int total_bytes;
-	unsigned int total_packets;
-
 	u16 reg_idx; /* holds the special value that gets the hardware register
 		      * offset associated with this ring, which is different
 		      * for DCB and RSS modes */
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 3b880a27f8d1..98963970206e 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -44,6 +44,7 @@
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
 #include <linux/ethtool.h>
+#include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <linux/prefetch.h>
 
@@ -202,6 +203,9 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter,
 	       (count < tx_ring->work_limit)) {
 		bool cleaned = false;
 		rmb(); /* read buffer_info after eop_desc */
+		/* eop could change between read and DD-check */
+		if (unlikely(eop != tx_ring->tx_buffer_info[i].next_to_watch))
+			goto cont_loop;
 		for ( ; !cleaned; count++) {
 			struct sk_buff *skb;
 			tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
@@ -231,6 +235,7 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter,
 				i = 0;
 		}
 
+cont_loop:
 		eop = tx_ring->tx_buffer_info[i].next_to_watch;
 		eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
 	}
@@ -265,11 +270,10 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter,
 		IXGBE_WRITE_REG(hw, IXGBE_VTEICS, tx_ring->v_idx);
 	}
 
+	u64_stats_update_begin(&tx_ring->syncp);
 	tx_ring->total_bytes += total_bytes;
 	tx_ring->total_packets += total_packets;
-
-	netdev->stats.tx_bytes += total_bytes;
-	netdev->stats.tx_packets += total_packets;
+	u64_stats_update_end(&tx_ring->syncp);
 
 	return count < tx_ring->work_limit;
 }
@@ -592,10 +596,10 @@ next_desc:
 	if (cleaned_count)
 		ixgbevf_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
 
+	u64_stats_update_begin(&rx_ring->syncp);
 	rx_ring->total_packets += total_rx_packets;
 	rx_ring->total_bytes += total_rx_bytes;
-	adapter->netdev->stats.rx_bytes += total_rx_bytes;
-	adapter->netdev->stats.rx_packets += total_rx_packets;
+	u64_stats_update_end(&rx_ring->syncp);
 
 	return cleaned;
 }
@@ -2255,10 +2259,6 @@ void ixgbevf_update_stats(struct ixgbevf_adapter *adapter)
 				adapter->stats.vfgotc);
 	UPDATE_VF_COUNTER_32bit(IXGBE_VFMPRC, adapter->stats.last_vfmprc,
 				adapter->stats.vfmprc);
-
-	/* Fill out the OS statistics structure */
-	adapter->netdev->stats.multicast = adapter->stats.vfmprc -
-		adapter->stats.base_vfmprc;
 }
 
 /**
@@ -3215,18 +3215,69 @@ static void ixgbevf_shutdown(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
+static struct rtnl_link_stats64 *ixgbevf_get_stats(struct net_device *netdev,
+						struct rtnl_link_stats64 *stats)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	unsigned int start;
+	u64 bytes, packets;
+	const struct ixgbevf_ring *ring;
+	int i;
+
+	ixgbevf_update_stats(adapter);
+
+	stats->multicast = adapter->stats.vfmprc - adapter->stats.base_vfmprc;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		ring = &adapter->rx_ring[i];
+		do {
+			start = u64_stats_fetch_begin_bh(&ring->syncp);
+			bytes = ring->total_bytes;
+			packets = ring->total_packets;
+		} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+		stats->rx_bytes += bytes;
+		stats->rx_packets += packets;
+	}
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		ring = &adapter->tx_ring[i];
+		do {
+			start = u64_stats_fetch_begin_bh(&ring->syncp);
+			bytes = ring->total_bytes;
+			packets = ring->total_packets;
+		} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+		stats->tx_bytes += bytes;
+		stats->tx_packets += packets;
+	}
+
+	return stats;
+}
+
+static int ixgbevf_set_features(struct net_device *netdev, u32 features)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	if (features & NETIF_F_RXCSUM)
+		adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
+	else
+		adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED;
+
+	return 0;
+}
+
 static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_open		= ixgbevf_open,
 	.ndo_stop		= ixgbevf_close,
 	.ndo_start_xmit		= ixgbevf_xmit_frame,
 	.ndo_set_rx_mode	= ixgbevf_set_rx_mode,
-	.ndo_set_multicast_list	= ixgbevf_set_rx_mode,
+	.ndo_get_stats64	= ixgbevf_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ixgbevf_set_mac,
 	.ndo_change_mtu		= ixgbevf_change_mtu,
 	.ndo_tx_timeout		= ixgbevf_tx_timeout,
 	.ndo_vlan_rx_add_vid	= ixgbevf_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= ixgbevf_vlan_rx_kill_vid,
+	.ndo_set_features	= ixgbevf_set_features,
 };
 
 static void ixgbevf_assign_netdev_ops(struct net_device *dev)
@@ -3339,16 +3390,18 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
 	/* setup the private structure */
 	err = ixgbevf_sw_init(adapter);
 
-	netdev->features = NETIF_F_SG |
+	netdev->hw_features = NETIF_F_SG |
 			   NETIF_F_IP_CSUM |
+			   NETIF_F_IPV6_CSUM |
+			   NETIF_F_TSO |
+			   NETIF_F_TSO6 |
+			   NETIF_F_RXCSUM;
+
+	netdev->features = netdev->hw_features |
 			   NETIF_F_HW_VLAN_TX |
 			   NETIF_F_HW_VLAN_RX |
 			   NETIF_F_HW_VLAN_FILTER;
 
-	netdev->features |= NETIF_F_IPV6_CSUM;
-	netdev->features |= NETIF_F_TSO;
-	netdev->features |= NETIF_F_TSO6;
-	netdev->features |= NETIF_F_GRO;
 	netdev->vlan_features |= NETIF_F_TSO;
 	netdev->vlan_features |= NETIF_F_TSO6;
 	netdev->vlan_features |= NETIF_F_IP_CSUM;
@@ -3358,6 +3411,8 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
 	/* The HW MAC address was set and/or determined in sw_init */
 	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
diff --git a/drivers/net/ixgbevf/mbx.c b/drivers/net/ethernet/intel/ixgbevf/mbx.c
index 7a8833125770..7a8833125770 100644
--- a/drivers/net/ixgbevf/mbx.c
+++ b/drivers/net/ethernet/intel/ixgbevf/mbx.c
diff --git a/drivers/net/ixgbevf/mbx.h b/drivers/net/ethernet/intel/ixgbevf/mbx.h
index ea393eb03f3a..ea393eb03f3a 100644
--- a/drivers/net/ixgbevf/mbx.h
+++ b/drivers/net/ethernet/intel/ixgbevf/mbx.h
diff --git a/drivers/net/ixgbevf/regs.h b/drivers/net/ethernet/intel/ixgbevf/regs.h
index 189200eeca26..189200eeca26 100644
--- a/drivers/net/ixgbevf/regs.h
+++ b/drivers/net/ethernet/intel/ixgbevf/regs.h
diff --git a/drivers/net/ixgbevf/vf.c b/drivers/net/ethernet/intel/ixgbevf/vf.c
index aa3682e8c473..aa3682e8c473 100644
--- a/drivers/net/ixgbevf/vf.c
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.c
diff --git a/drivers/net/ixgbevf/vf.h b/drivers/net/ethernet/intel/ixgbevf/vf.h
index 10306b492ee6..10306b492ee6 100644
--- a/drivers/net/ixgbevf/vf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.h
diff --git a/drivers/net/jme.c b/drivers/net/ethernet/jme.c
index 3ac262f55633..a869ee47dde6 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -2839,7 +2839,7 @@ static const struct net_device_ops jme_netdev_ops = {
 	.ndo_do_ioctl		= jme_ioctl,
 	.ndo_start_xmit		= jme_start_xmit,
 	.ndo_set_mac_address	= jme_set_macaddr,
-	.ndo_set_multicast_list	= jme_set_multi,
+	.ndo_set_rx_mode	= jme_set_multi,
 	.ndo_change_mtu		= jme_change_mtu,
 	.ndo_tx_timeout		= jme_tx_timeout,
 	.ndo_fix_features       = jme_fix_features,
diff --git a/drivers/net/jme.h b/drivers/net/ethernet/jme.h
index c1f8b893e2ea..c1f8b893e2ea 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/ethernet/jme.h
diff --git a/drivers/net/korina.c b/drivers/net/ethernet/korina.c
index 763844c587fd..d8430f487b84 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -58,7 +58,6 @@
 #include <asm/system.h>
 #include <asm/bitops.h>
 #include <asm/pgtable.h>
-#include <asm/segment.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
@@ -1089,7 +1088,7 @@ static const struct net_device_ops korina_netdev_ops = {
 	.ndo_open		= korina_open,
 	.ndo_stop		= korina_close,
 	.ndo_start_xmit		= korina_send_packet,
-	.ndo_set_multicast_list	= korina_multicast_list,
+	.ndo_set_rx_mode	= korina_multicast_list,
 	.ndo_tx_timeout		= korina_tx_timeout,
 	.ndo_do_ioctl		= korina_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 45f252b7da30..6bb2b9506cad 100644
--- a/drivers/net/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -687,7 +687,7 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
 	.ndo_do_ioctl = ltq_etop_ioctl,
 	.ndo_set_mac_address = ltq_etop_set_mac_address,
 	.ndo_validate_addr = eth_validate_addr,
-	.ndo_set_multicast_list = ltq_etop_set_multicast_list,
+	.ndo_set_rx_mode = ltq_etop_set_multicast_list,
 	.ndo_select_queue = ltq_etop_select_queue,
 	.ndo_init = ltq_etop_init,
 	.ndo_tx_timeout = ltq_etop_tx_timeout,
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
new file mode 100644
index 000000000000..0029934748bc
--- /dev/null
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -0,0 +1,111 @@
+#
+# Marvell device configuration
+#
+
+config NET_VENDOR_MARVELL
+	bool "Marvell devices"
+	default y
+	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Marvell devices. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_VENDOR_MARVELL
+
+config MV643XX_ETH
+	tristate "Marvell Discovery (643XX) and Orion ethernet support"
+	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
+	select INET_LRO
+	select PHYLIB
+	---help---
+	  This driver supports the gigabit ethernet MACs in the
+	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
+	  in the Marvell Orion ARM SoC family.
+
+	  Some boards that use the Discovery chipset are the Momenco
+	  Ocelot C and Jaguar ATX and Pegasos II.
+
+config PXA168_ETH
+	tristate "Marvell pxa168 ethernet support"
+	depends on CPU_PXA168
+	select PHYLIB
+	---help---
+	  This driver supports the pxa168 Ethernet ports.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called pxa168_eth.
+
+config SKGE
+	tristate "Marvell Yukon Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+	  and related Gigabit Ethernet adapters. It is a new smaller driver
+	  with better performance and more complete ethtool support.
+
+	  It does not support the link failover and network management
+	  features that "portable" vendor supplied sk98lin driver does.
+
+	  This driver supports adapters based on the original Yukon chipset:
+	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+	  It does not support the newer Yukon2 chipset: a separate driver,
+	  sky2, is provided for these adapters.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skge.  This is recommended.
+
+config SKGE_DEBUG
+	bool "Debugging interface"
+	depends on SKGE && DEBUG_FS
+	---help---
+	  This option adds the ability to dump driver state for debugging.
+	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
+	  transmit and receive rings.
+
+	  If unsure, say N.
+
+config SKGE_GENESIS
+	bool "Support for older SysKonnect Genesis boards"
+	depends on SKGE
+	---help---
+	 This enables support for the older and uncommon SysKonnect Genesis
+	 chips, which support MII via an external transceiver, instead of
+	 an internal one. Disabling this option will save some memory
+	 by making code smaller. If unsure say Y.
+
+config SKY2
+	tristate "Marvell Yukon 2 support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver supports Gigabit Ethernet adapters based on the
+	  Marvell Yukon 2 chipset:
+	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+	  There is companion driver for the older Marvell Yukon and
+	  SysKonnect Genesis based adapters: skge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sky2.  This is recommended.
+
+config SKY2_DEBUG
+	bool "Debugging interface"
+	depends on SKY2 && DEBUG_FS
+	---help---
+	  This option adds the ability to dump driver state for debugging.
+	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
+	  transmit and receive rings.
+
+	  If unsure, say N.
+
+endif # NET_VENDOR_MARVELL
diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile
new file mode 100644
index 000000000000..57e3234a37ba
--- /dev/null
+++ b/drivers/net/ethernet/marvell/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Marvell device drivers.
+#
+
+obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
+obj-$(CONFIG_SKGE) += skge.o
+obj-$(CONFIG_SKY2) += sky2.o
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 259699983ca5..1e2c9f072bfd 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2923,6 +2923,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
 	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM;
 
+	dev->priv_flags |= IFF_UNICAST_FLT;
+
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (mp->shared->win_protect)
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 1a3033d8e7ed..1a3033d8e7ed 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
diff --git a/drivers/net/skge.c b/drivers/net/ethernet/marvell/skge.c
index 98ec614c5690..34622b038094 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -3762,7 +3762,7 @@ static const struct net_device_ops skge_netdev_ops = {
 	.ndo_tx_timeout		= skge_tx_timeout,
 	.ndo_change_mtu		= skge_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= skge_set_multicast,
+	.ndo_set_rx_mode	= skge_set_multicast,
 	.ndo_set_mac_address	= skge_set_mac_address,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= skge_netpoll,
diff --git a/drivers/net/skge.h b/drivers/net/ethernet/marvell/skge.h
index a2eb34115844..a2eb34115844 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/ethernet/marvell/skge.h
diff --git a/drivers/net/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 57339da76326..3ff0a1292933 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -4612,7 +4612,7 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 	.ndo_do_ioctl		= sky2_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= sky2_set_mac_address,
-	.ndo_set_multicast_list	= sky2_set_multicast,
+	.ndo_set_rx_mode	= sky2_set_multicast,
 	.ndo_change_mtu		= sky2_change_mtu,
 	.ndo_fix_features	= sky2_fix_features,
 	.ndo_set_features	= sky2_set_features,
@@ -4629,7 +4629,7 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 	.ndo_do_ioctl		= sky2_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= sky2_set_mac_address,
-	.ndo_set_multicast_list	= sky2_set_multicast,
+	.ndo_set_rx_mode	= sky2_set_multicast,
 	.ndo_change_mtu		= sky2_change_mtu,
 	.ndo_fix_features	= sky2_fix_features,
 	.ndo_set_features	= sky2_set_features,
diff --git a/drivers/net/sky2.h b/drivers/net/ethernet/marvell/sky2.h
index 0af31b8b5f10..0af31b8b5f10 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/ethernet/marvell/sky2.h
diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig
new file mode 100644
index 000000000000..d8099a7903d3
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/Kconfig
@@ -0,0 +1,23 @@
+#
+# Mellanox driver configuration
+#
+
+config NET_VENDOR_MELLANOX
+	bool "Mellanox devices"
+	default y
+	depends on PCI && INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Mellanox cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_MELLANOX
+
+source "drivers/net/ethernet/mellanox/mlx4/Kconfig"
+
+endif # NET_VENDOR_MELLANOX
diff --git a/drivers/net/ethernet/mellanox/Makefile b/drivers/net/ethernet/mellanox/Makefile
new file mode 100644
index 000000000000..37afb9683372
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Mellanox device drivers.
+#
+
+obj-$(CONFIG_MLX4_CORE) += mlx4/
diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
new file mode 100644
index 000000000000..1bb93531f1ba
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -0,0 +1,27 @@
+#
+# Mellanox driver configuration
+#
+
+config MLX4_EN
+	tristate "Mellanox Technologies 10Gbit Ethernet support"
+	depends on PCI && INET
+	select MLX4_CORE
+	select INET_LRO
+	---help---
+	  This driver supports Mellanox Technologies ConnectX Ethernet
+	  devices.
+
+config MLX4_CORE
+	tristate
+	depends on PCI
+	default n
+
+config MLX4_DEBUG
+	bool "Verbose debugging output" if (MLX4_CORE && EXPERT)
+	depends on MLX4_CORE
+	default y
+	---help---
+	  This option causes debugging code to be compiled into the
+	  mlx4_core driver.  The output can be turned on via the
+	  debug_level module parameter (which can also be set after
+	  the driver is loaded through sysfs).
diff --git a/drivers/net/mlx4/Makefile b/drivers/net/ethernet/mellanox/mlx4/Makefile
index d1aa45a15854..d1aa45a15854 100644
--- a/drivers/net/mlx4/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx4/Makefile
diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c
index 116cae334dad..116cae334dad 100644
--- a/drivers/net/mlx4/alloc.c
+++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c
diff --git a/drivers/net/mlx4/catas.c b/drivers/net/ethernet/mellanox/mlx4/catas.c
index 32f947154c33..32f947154c33 100644
--- a/drivers/net/mlx4/catas.c
+++ b/drivers/net/ethernet/mellanox/mlx4/catas.c
diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 23cee7b6af91..23cee7b6af91 100644
--- a/drivers/net/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
diff --git a/drivers/net/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c
index bd8ef9f2fa71..bd8ef9f2fa71 100644
--- a/drivers/net/mlx4/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cq.c
diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
index ec4b6d047fe0..ec4b6d047fe0 100644
--- a/drivers/net/mlx4/en_cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index eb096253d781..eb096253d781 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index 6bfea233a9f2..6bfea233a9f2 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 4b0f32e568f8..27789be1e6ac 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1016,7 +1016,7 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_start_xmit		= mlx4_en_xmit,
 	.ndo_select_queue	= mlx4_en_select_queue,
 	.ndo_get_stats		= mlx4_en_get_stats,
-	.ndo_set_multicast_list	= mlx4_en_set_multicast,
+	.ndo_set_rx_mode	= mlx4_en_set_multicast,
 	.ndo_set_mac_address	= mlx4_en_set_mac,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= mlx4_en_change_mtu,
diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c
index 5e7109178061..5ada5b469112 100644
--- a/drivers/net/mlx4/en_port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c
@@ -128,7 +128,7 @@ int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
 	memset(context, 0, sizeof *context);
 
 	context->base_qpn = cpu_to_be32(base_qpn);
-	context->n_mac = 0x7;
+	context->n_mac = 0x2;
 	context->promisc = cpu_to_be32(promisc << SET_PORT_PROMISC_SHIFT |
 				       base_qpn);
 	context->mcast = cpu_to_be32(m_promisc << SET_PORT_MC_PROMISC_SHIFT |
diff --git a/drivers/net/mlx4/en_port.h b/drivers/net/ethernet/mellanox/mlx4/en_port.h
index e3d73e41c567..e3d73e41c567 100644
--- a/drivers/net/mlx4/en_port.h
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.h
diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
index 0dfb4ec8a9dd..0dfb4ec8a9dd 100644
--- a/drivers/net/mlx4/en_resources.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index 37cc9e5c56be..37cc9e5c56be 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
diff --git a/drivers/net/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
index 9fdbcecd499d..9fdbcecd499d 100644
--- a/drivers/net/mlx4/en_selftest.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 6e03de034ac7..6e03de034ac7 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 1ad1f6029af8..1ad1f6029af8 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 7eb8ba822e97..7eb8ba822e97 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
diff --git a/drivers/net/mlx4/fw.h b/drivers/net/ethernet/mellanox/mlx4/fw.h
index 1e8ecc3708e2..1e8ecc3708e2 100644
--- a/drivers/net/mlx4/fw.h
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.h
diff --git a/drivers/net/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c
index 02393fdf44c1..02393fdf44c1 100644
--- a/drivers/net/mlx4/icm.c
+++ b/drivers/net/ethernet/mellanox/mlx4/icm.c
diff --git a/drivers/net/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h
index b10c07a1dc1a..b10c07a1dc1a 100644
--- a/drivers/net/mlx4/icm.h
+++ b/drivers/net/ethernet/mellanox/mlx4/icm.h
diff --git a/drivers/net/mlx4/intf.c b/drivers/net/ethernet/mellanox/mlx4/intf.c
index 73c94fcdfddf..73c94fcdfddf 100644
--- a/drivers/net/mlx4/intf.c
+++ b/drivers/net/ethernet/mellanox/mlx4/intf.c
diff --git a/drivers/net/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index c94b3426d355..f0ee35df4dd7 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1117,6 +1117,8 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
 	info->port = port;
 	mlx4_init_mac_table(dev, &info->mac_table);
 	mlx4_init_vlan_table(dev, &info->vlan_table);
+	info->base_qpn = dev->caps.reserved_qps_base[MLX4_QP_REGION_ETH_ADDR] +
+			(port - 1) * (1 << log_num_mac);
 
 	sprintf(info->dev_name, "mlx4_port%d", port);
 	info->port_attr.attr.name = info->dev_name;
diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c
index cd1784593a3c..cd1784593a3c 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index a2fcd8402d37..a2fcd8402d37 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index ed84811766e6..ed84811766e6 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index 9c188bdd7f4f..9c188bdd7f4f 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
diff --git a/drivers/net/mlx4/pd.c b/drivers/net/ethernet/mellanox/mlx4/pd.c
index 1286b886dcea..1286b886dcea 100644
--- a/drivers/net/mlx4/pd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/pd.c
diff --git a/drivers/net/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index 1f95afda6841..609e0ec14cee 100644
--- a/drivers/net/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -258,9 +258,12 @@ void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, int qpn)
 	if (validate_index(dev, table, index))
 		goto out;
 
-	table->entries[index] = 0;
-	mlx4_set_port_mac_table(dev, port, table->entries);
-	--table->total;
+	/* Check whether this address has reference count */
+	if (!(--table->refs[index])) {
+		table->entries[index] = 0;
+		mlx4_set_port_mac_table(dev, port, table->entries);
+		--table->total;
+	}
 out:
 	mutex_unlock(&table->mutex);
 }
diff --git a/drivers/net/mlx4/profile.c b/drivers/net/ethernet/mellanox/mlx4/profile.c
index b967647d0c76..b967647d0c76 100644
--- a/drivers/net/mlx4/profile.c
+++ b/drivers/net/ethernet/mellanox/mlx4/profile.c
diff --git a/drivers/net/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index ec9350e5f21a..ec9350e5f21a 100644
--- a/drivers/net/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
diff --git a/drivers/net/mlx4/reset.c b/drivers/net/ethernet/mellanox/mlx4/reset.c
index 11e7c1cb99bf..11e7c1cb99bf 100644
--- a/drivers/net/mlx4/reset.c
+++ b/drivers/net/ethernet/mellanox/mlx4/reset.c
diff --git a/drivers/net/mlx4/sense.c b/drivers/net/ethernet/mellanox/mlx4/sense.c
index e2337a7411d9..e2337a7411d9 100644
--- a/drivers/net/mlx4/sense.c
+++ b/drivers/net/ethernet/mellanox/mlx4/sense.c
diff --git a/drivers/net/mlx4/srq.c b/drivers/net/ethernet/mellanox/mlx4/srq.c
index 3b07b80a0456..3b07b80a0456 100644
--- a/drivers/net/mlx4/srq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/srq.c
diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
new file mode 100644
index 000000000000..bd090dbe3ad6
--- /dev/null
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -0,0 +1,65 @@
+#
+# Micrel device configuration
+#
+
+config NET_VENDOR_MICREL
+	bool "Micrel devices"
+	default y
+	depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \
+		   (ARM && ARCH_KS8695)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Micrel devices. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_MICREL
+
+config ARM_KS8695_ETHER
+	tristate "KS8695 Ethernet support"
+	depends on ARM && ARCH_KS8695
+	select MII
+	---help---
+	  If you wish to compile a kernel for the KS8695 and want to
+	  use the internal ethernet then you should answer Y to this.
+
+config KS8842
+	tristate "Micrel KSZ8841/42 with generic bus interface"
+	depends on HAS_IOMEM && DMA_ENGINE
+	---help---
+	  This platform driver is for KSZ8841(1-port) / KS8842(2-port)
+	  ethernet switch chip (managed, VLAN, QoS) from Micrel or
+	  Timberdale(FPGA).
+
+config KS8851
+	tristate "Micrel KS8851 SPI"
+	depends on SPI
+	select MII
+	select CRC32
+	---help---
+	  SPI driver for Micrel KS8851 SPI attached network chip.
+
+config KS8851_MLL
+	tristate "Micrel KS8851 MLL"
+	depends on HAS_IOMEM
+	select MII
+	---help---
+	  This platform driver is for Micrel KS8851 Address/data bus
+	  multiplexed network chip.
+
+config KSZ884X_PCI
+	tristate "Micrel KSZ8841/2 PCI"
+	depends on PCI
+	select MII
+	select CRC32
+	---help---
+	  This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ksz884x.
+
+endif # NET_VENDOR_MICREL
diff --git a/drivers/net/ethernet/micrel/Makefile b/drivers/net/ethernet/micrel/Makefile
new file mode 100644
index 000000000000..c83e4bc50c73
--- /dev/null
+++ b/drivers/net/ethernet/micrel/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Micrel network device drivers.
+#
+
+obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
+obj-$(CONFIG_KS8842) += ks8842.o
+obj-$(CONFIG_KS8851) += ks8851.o
+obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
+obj-$(CONFIG_KSZ884X_PCI) += ksz884x.o
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/ethernet/micrel/ks8695net.c
index c827a6097d02..70788401d699 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/ethernet/micrel/ks8695net.c
@@ -1333,7 +1333,7 @@ static const struct net_device_ops ks8695_netdev_ops = {
 	.ndo_tx_timeout		= ks8695_timeout,
 	.ndo_set_mac_address	= ks8695_set_mac,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= ks8695_set_multicast,
+	.ndo_set_rx_mode	= ks8695_set_multicast,
 };
 
 /**
diff --git a/drivers/net/arm/ks8695net.h b/drivers/net/ethernet/micrel/ks8695net.h
index 80eff6ea5163..80eff6ea5163 100644
--- a/drivers/net/arm/ks8695net.h
+++ b/drivers/net/ethernet/micrel/ks8695net.h
diff --git a/drivers/net/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c
index 4a6ae057e3b1..4a6ae057e3b1 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ethernet/micrel/ks8842.c
diff --git a/drivers/net/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index f56743a28fc0..f56743a28fc0 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
diff --git a/drivers/net/ks8851.h b/drivers/net/ethernet/micrel/ks8851.h
index 537fb06e5932..537fb06e5932 100644
--- a/drivers/net/ks8851.h
+++ b/drivers/net/ethernet/micrel/ks8851.h
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index d19c849059d8..d19c849059d8 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
diff --git a/drivers/net/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 27418d31a09f..27418d31a09f 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
new file mode 100644
index 000000000000..8163fd0f453f
--- /dev/null
+++ b/drivers/net/ethernet/microchip/Kconfig
@@ -0,0 +1,38 @@
+#
+# Microchip network device configuration
+#
+
+config NET_VENDOR_MICROCHIP
+	bool "Microchip devices"
+	default y
+	depends on SPI && EXPERIMENTAL
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Microchip cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_MICROCHIP
+
+config ENC28J60
+	tristate "ENC28J60 support"
+	depends on SPI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  Support for the Microchip EN28J60 ethernet chip.
+
+	  To compile this driver as a module, choose M here. The module will be
+	  called enc28j60.
+
+config ENC28J60_WRITEVERIFY
+	bool "Enable write verify"
+	depends on ENC28J60
+	---help---
+	  Enable the verify after the buffer write useful for debugging purpose.
+	  If unsure, say N.
+
+endif # NET_VENDOR_MICROCHIP
diff --git a/drivers/net/ethernet/microchip/Makefile b/drivers/net/ethernet/microchip/Makefile
new file mode 100644
index 000000000000..573d4292b9ea
--- /dev/null
+++ b/drivers/net/ethernet/microchip/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Microchip network device drivers.
+#
+
+obj-$(CONFIG_ENC28J60) += enc28j60.o
diff --git a/drivers/net/enc28j60.c b/drivers/net/ethernet/microchip/enc28j60.c
index 2837ce209cd7..50055e0282ed 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/ethernet/microchip/enc28j60.c
@@ -1534,7 +1534,7 @@ static const struct net_device_ops enc28j60_netdev_ops = {
 	.ndo_open		= enc28j60_net_open,
 	.ndo_stop		= enc28j60_net_close,
 	.ndo_start_xmit		= enc28j60_send_packet,
-	.ndo_set_multicast_list = enc28j60_set_multicast_list,
+	.ndo_set_rx_mode	= enc28j60_set_multicast_list,
 	.ndo_set_mac_address	= enc28j60_set_mac_address,
 	.ndo_tx_timeout		= enc28j60_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/enc28j60_hw.h b/drivers/net/ethernet/microchip/enc28j60_hw.h
index 25b41de49f0e..25b41de49f0e 100644
--- a/drivers/net/enc28j60_hw.h
+++ b/drivers/net/ethernet/microchip/enc28j60_hw.h
diff --git a/drivers/net/mipsnet.c b/drivers/net/ethernet/mipsnet.c
index 004e64ab1f95..d05b0c9e1e9c 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/ethernet/mipsnet.c
@@ -242,7 +242,7 @@ static const struct net_device_ops mipsnet_netdev_ops = {
 	.ndo_open		= mipsnet_open,
 	.ndo_stop		= mipsnet_close,
 	.ndo_start_xmit		= mipsnet_xmit,
-	.ndo_set_multicast_list	= mipsnet_set_mclist,
+	.ndo_set_rx_mode	= mipsnet_set_mclist,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/ethernet/myricom/Kconfig b/drivers/net/ethernet/myricom/Kconfig
new file mode 100644
index 000000000000..540f0c6fc160
--- /dev/null
+++ b/drivers/net/ethernet/myricom/Kconfig
@@ -0,0 +1,47 @@
+#
+# Myricom device configuration
+#
+
+config NET_VENDOR_MYRI
+	bool "Myricom devices"
+	default y
+	depends on PCI && INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say
+	  Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Myricom cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_MYRI
+
+config MYRI10GE
+	tristate "Myricom Myri-10G Ethernet support"
+	depends on PCI && INET
+	select FW_LOADER
+	select CRC32
+	select INET_LRO
+	---help---
+	  This driver supports Myricom Myri-10G Dual Protocol interface in
+	  Ethernet mode. If the eeprom on your board is not recent enough,
+	  you will need a newer firmware image.
+	  You may get this image or more information, at:
+
+	  <http://www.myri.com/scs/download-Myri10GE.html>
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called myri10ge.
+
+config MYRI10GE_DCA
+	bool "Direct Cache Access (DCA) Support"
+	default y
+	depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
+
+endif # NET_VENDOR_MYRI
diff --git a/drivers/net/ethernet/myricom/Makefile b/drivers/net/ethernet/myricom/Makefile
new file mode 100644
index 000000000000..296c0a10056b
--- /dev/null
+++ b/drivers/net/ethernet/myricom/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Myricom network device drivers.
+#
+
+obj-$(CONFIG_MYRI10GE) += myri10ge/
diff --git a/drivers/net/myri10ge/Makefile b/drivers/net/ethernet/myricom/myri10ge/Makefile
index 5df891647aee..5df891647aee 100644
--- a/drivers/net/myri10ge/Makefile
+++ b/drivers/net/ethernet/myricom/myri10ge/Makefile
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
index 1d2247554a35..81c17002374b 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
@@ -3892,7 +3892,7 @@ static const struct net_device_ops myri10ge_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= myri10ge_change_mtu,
 	.ndo_fix_features	= myri10ge_fix_features,
-	.ndo_set_multicast_list = myri10ge_set_multicast_list,
+	.ndo_set_rx_mode	= myri10ge_set_multicast_list,
 	.ndo_set_mac_address	= myri10ge_set_mac_address,
 };
 
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h
index 11be150e4d67..11be150e4d67 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h
diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
index 7ec4b864a550..7ec4b864a550 100644
--- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
new file mode 100644
index 000000000000..4a6b9fd073b6
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -0,0 +1,83 @@
+#
+# National Semi-conductor device configuration
+#
+
+config NET_VENDOR_NATSEMI
+	bool "National Semi-conductor devices"
+	default y
+	depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about National Semi-conductor devices. If you say Y,
+	  you will be asked for your specific card in the following questions.
+
+if NET_VENDOR_NATSEMI
+
+config IBMLANA
+	tristate "IBM LAN Adapter/A support"
+	depends on MCA
+	---help---
+	  This is a Micro Channel Ethernet adapter.  You need to set
+	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
+	  driver and as a module.
+
+	  To compile this driver as a module, choose M here. The only
+	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
+	  will both support 16K and 32K memory windows, however a 32K window
+	  gives a better security against packet losses.  Usage of multiple
+	  boards with this driver should be possible, but has not been tested
+	  up to now due to lack of hardware.
+
+config MACSONIC
+	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
+	depends on MAC
+	---help---
+	  Support for NatSemi SONIC based Ethernet devices.  This includes
+	  the onboard Ethernet in many Quadras as well as some LC-PDS,
+	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
+	  one of these say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. This module will
+	  be called macsonic.
+
+config MIPS_JAZZ_SONIC
+	tristate "MIPS JAZZ onboard SONIC Ethernet support"
+	depends on MACH_JAZZ
+	---help---
+	  This is the driver for the onboard card of MIPS Magnum 4000,
+	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+config NATSEMI
+	tristate "National Semiconductor DP8381x series PCI Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is for the National Semiconductor DP83810 series,
+	  which is used in cards from PureData, NetGear, Linksys
+	  and others, including the 83815 chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/natsemi.html>.
+
+config NS83820
+	tristate "National Semiconductor DP83820 support"
+	depends on PCI
+	---help---
+	  This is a driver for the National Semiconductor DP83820 series
+	  of gigabit ethernet MACs.  Cards using this chipset include
+	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
+	  zero copy.
+
+config XTENSA_XT2000_SONIC
+	tristate "Xtensa XT2000 onboard SONIC Ethernet support"
+	depends on XTENSA_PLATFORM_XT2000
+	---help---
+	  This is the driver for the onboard card of the Xtensa XT2000 board.
+
+endif # NET_VENDOR_NATSEMI
diff --git a/drivers/net/ethernet/natsemi/Makefile b/drivers/net/ethernet/natsemi/Makefile
new file mode 100644
index 000000000000..9aa5dea52b3e
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the National Semi-conductor Sonic devices.
+#
+
+obj-$(CONFIG_IBMLANA) += ibmlana.o
+obj-$(CONFIG_MACSONIC) += macsonic.o
+obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+obj-$(CONFIG_NATSEMI) += natsemi.o
+obj-$(CONFIG_NS83820) += ns83820.o
+obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
diff --git a/drivers/net/ibmlana.c b/drivers/net/ethernet/natsemi/ibmlana.c
index a7d6cad32953..999407f7ebdf 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ethernet/natsemi/ibmlana.c
@@ -910,7 +910,7 @@ static const struct net_device_ops ibmlana_netdev_ops = {
 	.ndo_open 		= ibmlana_open,
 	.ndo_stop 		= ibmlana_close,
 	.ndo_start_xmit		= ibmlana_tx,
-	.ndo_set_multicast_list = ibmlana_set_multicast_list,
+	.ndo_set_rx_mode	= ibmlana_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ibmlana.h b/drivers/net/ethernet/natsemi/ibmlana.h
index accd5efc9c8a..accd5efc9c8a 100644
--- a/drivers/net/ibmlana.h
+++ b/drivers/net/ethernet/natsemi/ibmlana.h
diff --git a/drivers/net/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
index 949c1f933644..fc7c6a932ad9 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/ethernet/natsemi/jazzsonic.c
@@ -111,7 +111,7 @@ static const struct net_device_ops sonic_netdev_ops = {
 	.ndo_stop		= jazzsonic_close,
 	.ndo_start_xmit		= sonic_send_packet,
 	.ndo_get_stats		= sonic_get_stats,
-	.ndo_set_multicast_list	= sonic_multicast_list,
+	.ndo_set_rx_mode	= sonic_multicast_list,
 	.ndo_tx_timeout		= sonic_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c
index c93679ee6994..5c36948e54d7 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/ethernet/natsemi/macsonic.c
@@ -190,7 +190,7 @@ static const struct net_device_ops macsonic_netdev_ops = {
 	.ndo_open		= macsonic_open,
 	.ndo_stop		= macsonic_close,
 	.ndo_start_xmit		= sonic_send_packet,
-	.ndo_set_multicast_list	= sonic_multicast_list,
+	.ndo_set_rx_mode	= sonic_multicast_list,
 	.ndo_tx_timeout		= sonic_tx_timeout,
 	.ndo_get_stats		= sonic_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
index 2962cc695ce3..6ca047aab793 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/ethernet/natsemi/natsemi.c
@@ -783,7 +783,7 @@ static const struct net_device_ops natsemi_netdev_ops = {
 	.ndo_stop		= netdev_close,
 	.ndo_start_xmit		= start_tx,
 	.ndo_get_stats		= get_stats,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= natsemi_change_mtu,
 	.ndo_do_ioctl		= netdev_ioctl,
 	.ndo_tx_timeout 	= ns_tx_timeout,
diff --git a/drivers/net/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
index e736aec588fc..1a1e20e97a23 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ethernet/natsemi/ns83820.c
@@ -1937,7 +1937,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_start_xmit		= ns83820_hard_start_xmit,
 	.ndo_get_stats		= ns83820_get_stats,
 	.ndo_change_mtu		= ns83820_change_mtu,
-	.ndo_set_multicast_list = ns83820_set_multicast,
+	.ndo_set_rx_mode	= ns83820_set_multicast,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_tx_timeout		= ns83820_tx_timeout,
diff --git a/drivers/net/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
index 26e25d7f5829..26e25d7f5829 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/ethernet/natsemi/sonic.c
diff --git a/drivers/net/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
index 07091dd27e5d..07091dd27e5d 100644
--- a/drivers/net/sonic.h
+++ b/drivers/net/ethernet/natsemi/sonic.h
diff --git a/drivers/net/xtsonic.c b/drivers/net/ethernet/natsemi/xtsonic.c
index 9f12026d98e7..ccf61b9da8d1 100644
--- a/drivers/net/xtsonic.c
+++ b/drivers/net/ethernet/natsemi/xtsonic.c
@@ -122,7 +122,7 @@ static const struct net_device_ops xtsonic_netdev_ops = {
 	.ndo_stop		= xtsonic_close,
 	.ndo_start_xmit		= sonic_send_packet,
 	.ndo_get_stats		= sonic_get_stats,
-	.ndo_set_multicast_list	= sonic_multicast_list,
+	.ndo_set_rx_mode	= sonic_multicast_list,
 	.ndo_tx_timeout		= sonic_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/ethernet/neterion/Kconfig b/drivers/net/ethernet/neterion/Kconfig
new file mode 100644
index 000000000000..ff26b54bd3fb
--- /dev/null
+++ b/drivers/net/ethernet/neterion/Kconfig
@@ -0,0 +1,55 @@
+#
+# Exar device configuration
+#
+
+config NET_VENDOR_EXAR
+	bool "Exar devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say
+	  Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Exar cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_EXAR
+
+config S2IO
+	tristate "Exar Xframe 10Gb Ethernet Adapter"
+	depends on PCI
+	---help---
+	  This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/s2io.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called s2io.
+
+config VXGE
+	tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
+	depends on PCI && INET
+	---help---
+	  This driver supports Exar Corp's X3100 Series 10 GbE PCIe
+	  I/O Virtualized Server Adapter.
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/vxge.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called vxge.
+
+config VXGE_DEBUG_TRACE_ALL
+	bool "Enabling All Debug trace statements in driver"
+	default n
+	depends on VXGE
+	---help---
+	  Say Y here if you want to enabling all the debug trace statements in
+	  the vxge driver. By default only few debug trace statements are
+	  enabled.
+
+endif # NET_VENDOR_EXAR
diff --git a/drivers/net/ethernet/neterion/Makefile b/drivers/net/ethernet/neterion/Makefile
new file mode 100644
index 000000000000..70c8058a601a
--- /dev/null
+++ b/drivers/net/ethernet/neterion/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Exar network device drivers.
+#
+
+obj-$(CONFIG_S2IO) += s2io.o
+obj-$(CONFIG_VXGE) += vxge/
diff --git a/drivers/net/s2io-regs.h b/drivers/net/ethernet/neterion/s2io-regs.h
index 3688325c11f5..3688325c11f5 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/ethernet/neterion/s2io-regs.h
diff --git a/drivers/net/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 277d48b0800a..840cbb25bdde 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -7682,7 +7682,7 @@ static const struct net_device_ops s2io_netdev_ops = {
 	.ndo_get_stats	        = s2io_get_stats,
 	.ndo_start_xmit    	= s2io_xmit,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list = s2io_set_multicast,
+	.ndo_set_rx_mode	= s2io_set_multicast,
 	.ndo_do_ioctl	   	= s2io_ioctl,
 	.ndo_set_mac_address    = s2io_set_mac_addr,
 	.ndo_change_mtu	   	= s2io_change_mtu,
diff --git a/drivers/net/s2io.h b/drivers/net/ethernet/neterion/s2io.h
index d5596926a1ef..d5596926a1ef 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/ethernet/neterion/s2io.h
diff --git a/drivers/net/vxge/Makefile b/drivers/net/ethernet/neterion/vxge/Makefile
index b625e2c503f5..b625e2c503f5 100644
--- a/drivers/net/vxge/Makefile
+++ b/drivers/net/ethernet/neterion/vxge/Makefile
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/ethernet/neterion/vxge/vxge-config.c
index 1520c574cb20..1520c574cb20 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-config.c
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/ethernet/neterion/vxge/vxge-config.h
index dd362584f5ca..dd362584f5ca 100644
--- a/drivers/net/vxge/vxge-config.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-config.h
diff --git a/drivers/net/vxge/vxge-ethtool.c b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c
index 92dd72d3f9de..92dd72d3f9de 100644
--- a/drivers/net/vxge/vxge-ethtool.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c
diff --git a/drivers/net/vxge/vxge-ethtool.h b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.h
index 6cf3044d7f43..6cf3044d7f43 100644
--- a/drivers/net/vxge/vxge-ethtool.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.h
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index 178348a258d2..1a53a24fe3d4 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -3354,7 +3354,7 @@ static const struct net_device_ops vxge_netdev_ops = {
 	.ndo_get_stats64        = vxge_get_stats64,
 	.ndo_start_xmit         = vxge_xmit,
 	.ndo_validate_addr      = eth_validate_addr,
-	.ndo_set_multicast_list = vxge_set_multicast,
+	.ndo_set_rx_mode	= vxge_set_multicast,
 	.ndo_do_ioctl           = vxge_ioctl,
 	.ndo_set_mac_address    = vxge_set_mac_addr,
 	.ndo_change_mtu         = vxge_change_mtu,
diff --git a/drivers/net/vxge/vxge-main.h b/drivers/net/ethernet/neterion/vxge/vxge-main.h
index f52a42d1dbb7..f52a42d1dbb7 100644
--- a/drivers/net/vxge/vxge-main.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.h
diff --git a/drivers/net/vxge/vxge-reg.h b/drivers/net/ethernet/neterion/vxge/vxge-reg.h
index 3e658b175947..3e658b175947 100644
--- a/drivers/net/vxge/vxge-reg.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-reg.h
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/ethernet/neterion/vxge/vxge-traffic.c
index ad64ce0afe3f..ad64ce0afe3f 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-traffic.c
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/ethernet/neterion/vxge/vxge-traffic.h
index 4a518a3b131c..4a518a3b131c 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-traffic.h
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/ethernet/neterion/vxge/vxge-version.h
index b9efa28bab3e..b9efa28bab3e 100644
--- a/drivers/net/vxge/vxge-version.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-version.h
diff --git a/drivers/net/netx-eth.c b/drivers/net/ethernet/netx-eth.c
index 2dfee892d200..8d288af16fc9 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/ethernet/netx-eth.c
@@ -306,7 +306,7 @@ static const struct net_device_ops netx_eth_netdev_ops = {
 	.ndo_stop		= netx_eth_close,
 	.ndo_start_xmit		= netx_eth_hard_start_xmit,
 	.ndo_tx_timeout		= netx_eth_timeout,
-	.ndo_set_multicast_list	= netx_eth_set_multicast_list,
+	.ndo_set_rx_mode	= netx_eth_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig
new file mode 100644
index 000000000000..01182b559473
--- /dev/null
+++ b/drivers/net/ethernet/nuvoton/Kconfig
@@ -0,0 +1,30 @@
+#
+# Nuvoton network device configuration
+#
+
+config NET_VENDOR_NUVOTON
+	bool "Nuvoton devices"
+	default y
+	depends on ARM && ARCH_W90X900
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Nuvoton cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_NUVOTON
+
+config W90P910_ETH
+	tristate "Nuvoton w90p910 Ethernet support"
+	depends on ARM && ARCH_W90X900
+	select PHYLIB
+	select MII
+	---help---
+	  Say Y here if you want to use built-in Ethernet ports
+	  on w90p910 processor.
+
+endif # NET_VENDOR_NUVOTON
diff --git a/drivers/net/ethernet/nuvoton/Makefile b/drivers/net/ethernet/nuvoton/Makefile
new file mode 100644
index 000000000000..171aa044bd3b
--- /dev/null
+++ b/drivers/net/ethernet/nuvoton/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Nuvoton network device drivers.
+#
+
+obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/ethernet/nuvoton/w90p910_ether.c
index bfea499a3513..f1bfb8f8fcf0 100644
--- a/drivers/net/arm/w90p910_ether.c
+++ b/drivers/net/ethernet/nuvoton/w90p910_ether.c
@@ -919,7 +919,7 @@ static const struct net_device_ops w90p910_ether_netdev_ops = {
 	.ndo_stop		= w90p910_ether_close,
 	.ndo_start_xmit		= w90p910_ether_start_xmit,
 	.ndo_get_stats		= w90p910_ether_stats,
-	.ndo_set_multicast_list	= w90p910_ether_set_multicast_list,
+	.ndo_set_rx_mode	= w90p910_ether_set_multicast_list,
 	.ndo_set_mac_address	= w90p910_set_mac_address,
 	.ndo_do_ioctl		= w90p910_ether_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ethernet/nvidia/Kconfig b/drivers/net/ethernet/nvidia/Kconfig
new file mode 100644
index 000000000000..ace19e7f6d13
--- /dev/null
+++ b/drivers/net/ethernet/nvidia/Kconfig
@@ -0,0 +1,32 @@
+#
+# NVIDIA network device configuration
+#
+
+config NET_VENDOR_NVIDIA
+	bool "NVIDIA devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about NVIDIA cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_NVIDIA
+
+config FORCEDETH
+	tristate "nForce Ethernet support"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called forcedeth.
+
+endif # NET_VENDOR_NVIDIA
diff --git a/drivers/net/ethernet/nvidia/Makefile b/drivers/net/ethernet/nvidia/Makefile
new file mode 100644
index 000000000000..e079ae5771d5
--- /dev/null
+++ b/drivers/net/ethernet/nvidia/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the NVIDIA network device drivers.
+#
+
+obj-$(CONFIG_FORCEDETH) += forcedeth.o
diff --git a/drivers/net/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index e55df308a3af..98bb64bc24d9 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -5208,7 +5208,7 @@ static const struct net_device_ops nv_netdev_ops = {
 	.ndo_set_features	= nv_set_features,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= nv_set_mac_address,
-	.ndo_set_multicast_list	= nv_set_multicast,
+	.ndo_set_rx_mode	= nv_set_multicast,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= nv_poll_controller,
 #endif
@@ -5225,7 +5225,7 @@ static const struct net_device_ops nv_netdev_ops_optimized = {
 	.ndo_set_features	= nv_set_features,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= nv_set_mac_address,
-	.ndo_set_multicast_list	= nv_set_multicast,
+	.ndo_set_rx_mode	= nv_set_multicast,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= nv_poll_controller,
 #endif
@@ -5615,7 +5615,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		goto out_error;
 	}
 
-	nv_vlan_mode(dev, dev->features);
+	if (id->driver_data & DEV_HAS_VLAN)
+		nv_vlan_mode(dev, dev->features);
 
 	netif_carrier_off(dev);
 
diff --git a/drivers/net/octeon/Kconfig b/drivers/net/ethernet/octeon/Kconfig
index 1e56bbf3f5c0..3de52ffd2872 100644
--- a/drivers/net/octeon/Kconfig
+++ b/drivers/net/ethernet/octeon/Kconfig
@@ -1,10 +1,14 @@
+#
+# Cavium network device configuration
+#
+
 config OCTEON_MGMT_ETHERNET
 	tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)"
 	depends on  CPU_CAVIUM_OCTEON
 	select PHYLIB
 	select MDIO_OCTEON
 	default y
-	help
+	---help---
 	  This option enables the ethernet driver for the management
 	  port on Cavium Networks' Octeon CN57XX, CN56XX, CN55XX,
 	  CN54XX, CN52XX, and CN6XXX chips.
diff --git a/drivers/net/ethernet/octeon/Makefile b/drivers/net/ethernet/octeon/Makefile
new file mode 100644
index 000000000000..efa41c1d91c5
--- /dev/null
+++ b/drivers/net/ethernet/octeon/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Cavium network device drivers.
+#
+
+obj-$(CONFIG_OCTEON_MGMT_ETHERNET)	+= octeon_mgmt.o
diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c
index 429e08c84e9b..bc1d946b7971 100644
--- a/drivers/net/octeon/octeon_mgmt.c
+++ b/drivers/net/ethernet/octeon/octeon_mgmt.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <linux/slab.h>
 #include <linux/phy.h>
@@ -1059,7 +1060,6 @@ static const struct net_device_ops octeon_mgmt_ops = {
 	.ndo_stop =			octeon_mgmt_stop,
 	.ndo_start_xmit =		octeon_mgmt_xmit,
 	.ndo_set_rx_mode = 		octeon_mgmt_set_rx_filtering,
-	.ndo_set_multicast_list =	octeon_mgmt_set_rx_filtering,
 	.ndo_set_mac_address =		octeon_mgmt_set_mac_address,
 	.ndo_do_ioctl = 		octeon_mgmt_ioctl,
 	.ndo_change_mtu =		octeon_mgmt_change_mtu,
@@ -1102,6 +1102,8 @@ static int __devinit octeon_mgmt_probe(struct platform_device *pdev)
 	tasklet_init(&p->tx_clean_tasklet,
 		     octeon_mgmt_clean_tx_tasklet, (unsigned long)p);
 
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
 	netdev->netdev_ops = &octeon_mgmt_ops;
 	netdev->ethtool_ops = &octeon_mgmt_ethtool_ops;
 
diff --git a/drivers/net/ethernet/oki-semi/Kconfig b/drivers/net/ethernet/oki-semi/Kconfig
new file mode 100644
index 000000000000..ecd45f9ea9d9
--- /dev/null
+++ b/drivers/net/ethernet/oki-semi/Kconfig
@@ -0,0 +1,23 @@
+#
+# OKI Semiconductor device configuration
+#
+
+config NET_VENDOR_OKI
+	bool "OKI Semiconductor devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about OKI Semiconductor cards. If you say Y, you will
+	  be asked for your specific card in the following questions.
+
+if NET_VENDOR_OKI
+
+source "drivers/net/ethernet/oki-semi/pch_gbe/Kconfig"
+
+endif # NET_VENDOR_OKI
diff --git a/drivers/net/ethernet/oki-semi/Makefile b/drivers/net/ethernet/oki-semi/Makefile
new file mode 100644
index 000000000000..b6780c877c19
--- /dev/null
+++ b/drivers/net/ethernet/oki-semi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the OKI Semiconductor device drivers.
+#
+
+obj-$(CONFIG_PCH_GBE) += pch_gbe/
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
new file mode 100644
index 000000000000..c85709d6ff1b
--- /dev/null
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
@@ -0,0 +1,20 @@
+#
+# OKI Semiconductor device configuration
+#
+
+config PCH_GBE
+	tristate "OKI SEMICONDUCTOR ML7223 IOH GbE (Intel EG20T PCH)"
+	depends on PCI
+	select MII
+	---help---
+	  This is a gigabit ethernet driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
+	  general embedded platform.  EG20T PCH has Gigabit Ethernet interface.
+	  Using this interface, it is able to access system devices connected
+	  to Gigabit Ethernet.  This driver enables Gigabit Ethernet function.
+
+	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+	  Output Hub), ML7223.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7223 is companion chip for Intel Atom E6xx series.
+	  ML7223 is completely compatible for Intel EG20T PCH.
diff --git a/drivers/net/pch_gbe/Makefile b/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
index 31288d4ad248..31288d4ad248 100644
--- a/drivers/net/pch_gbe/Makefile
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 59fac77d0dbb..59fac77d0dbb 100644
--- a/drivers/net/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
diff --git a/drivers/net/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index e48f084ad226..e48f084ad226 100644
--- a/drivers/net/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
diff --git a/drivers/net/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 94aaac5b057b..94aaac5b057b 100644
--- a/drivers/net/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
diff --git a/drivers/net/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
index ea2d8e41887a..ea2d8e41887a 100644
--- a/drivers/net/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index eac3c5ca9731..72276fe78f8f 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2158,7 +2158,7 @@ static const struct net_device_ops pch_gbe_netdev_ops = {
 	.ndo_change_mtu = pch_gbe_change_mtu,
 	.ndo_set_features = pch_gbe_set_features,
 	.ndo_do_ioctl = pch_gbe_ioctl,
-	.ndo_set_multicast_list = &pch_gbe_set_multi,
+	.ndo_set_rx_mode = pch_gbe_set_multi,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = pch_gbe_netpoll,
 #endif
diff --git a/drivers/net/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
index 5b5d90a47e29..5b5d90a47e29 100644
--- a/drivers/net/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
diff --git a/drivers/net/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
index 28bb9603d736..28bb9603d736 100644
--- a/drivers/net/pch_gbe/pch_gbe_phy.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
diff --git a/drivers/net/pch_gbe/pch_gbe_phy.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
index 03264dc7b5ec..03264dc7b5ec 100644
--- a/drivers/net/pch_gbe/pch_gbe_phy.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
new file mode 100644
index 000000000000..4add1db20f1e
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -0,0 +1,46 @@
+#
+# Packet engine device configuration
+#
+
+config NET_PACKET_ENGINE
+	bool "Packet Engine devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about packet engine devices. If you say Y, you will
+	  be asked for your specific card in the following questions.
+
+if NET_PACKET_ENGINE
+
+config HAMACHI
+	tristate "Packet Engines Hamachi GNIC-II support"
+	depends on PCI
+	select MII
+	---help---
+	  If you have a Gigabit Ethernet card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module will be
+	  called hamachi.
+
+config YELLOWFIN
+	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+	  used by the Beowulf Linux cluster project.  See
+	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+	  information about this driver in particular and Beowulf in general.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called yellowfin.  This is recommended.
+
+endif # NET_PACKET_ENGINE
diff --git a/drivers/net/ethernet/packetengines/Makefile b/drivers/net/ethernet/packetengines/Makefile
new file mode 100644
index 000000000000..995ccd077d0c
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Packet Engine network device drivers.
+#
+
+obj-$(CONFIG_HAMACHI) += hamachi.o
+obj-$(CONFIG_YELLOWFIN) += yellowfin.o
diff --git a/drivers/net/hamachi.c b/drivers/net/ethernet/packetengines/hamachi.c
index c274b3d77eb5..3458df3780b8 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/ethernet/packetengines/hamachi.c
@@ -567,7 +567,7 @@ static const struct net_device_ops hamachi_netdev_ops = {
 	.ndo_stop		= hamachi_close,
 	.ndo_start_xmit		= hamachi_start_xmit,
 	.ndo_get_stats		= hamachi_get_stats,
-	.ndo_set_multicast_list	= set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/yellowfin.c b/drivers/net/ethernet/packetengines/yellowfin.c
index 3e5ac60b89ac..db44e9af03c3 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/ethernet/packetengines/yellowfin.c
@@ -359,7 +359,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_open 		= yellowfin_open,
 	.ndo_stop 		= yellowfin_close,
 	.ndo_start_xmit 	= yellowfin_start_xmit,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/ethernet/pasemi/Kconfig b/drivers/net/ethernet/pasemi/Kconfig
new file mode 100644
index 000000000000..01e6c329d78c
--- /dev/null
+++ b/drivers/net/ethernet/pasemi/Kconfig
@@ -0,0 +1,30 @@
+#
+# PA Semi network device configuration
+#
+
+config NET_VENDOR_PASEMI
+	bool "PA Semi devices"
+	default y
+	depends on PPC_PASEMI && PCI && INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about PA Semi cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_PASEMI
+
+config PASEMI_MAC
+	tristate "PA Semi 1/10Gbit MAC"
+	depends on PPC_PASEMI && PCI && INET
+	select PHYLIB
+	select INET_LRO
+	---help---
+	  This driver supports the on-chip 1/10Gbit Ethernet controller on
+	  PA Semi's PWRficient line of chips.
+
+endif # NET_VENDOR_PASEMI
diff --git a/drivers/net/ethernet/pasemi/Makefile b/drivers/net/ethernet/pasemi/Makefile
new file mode 100644
index 000000000000..05db5434bafc
--- /dev/null
+++ b/drivers/net/ethernet/pasemi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the A Semi network device drivers.
+#
+
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o pasemi_mac_ethtool.o
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
index 9ec112ca62e4..fad620da7c11 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
@@ -1719,7 +1719,7 @@ static const struct net_device_ops pasemi_netdev_ops = {
 	.ndo_open		= pasemi_mac_open,
 	.ndo_stop		= pasemi_mac_close,
 	.ndo_start_xmit		= pasemi_mac_start_tx,
-	.ndo_set_multicast_list	= pasemi_mac_set_rx_mode,
+	.ndo_set_rx_mode	= pasemi_mac_set_rx_mode,
 	.ndo_set_mac_address	= pasemi_mac_set_mac_addr,
 	.ndo_change_mtu		= pasemi_mac_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/ethernet/pasemi/pasemi_mac.h
index e2f4efa8ad46..e2f4efa8ad46 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/ethernet/pasemi/pasemi_mac.h
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c
index 4825959a0efe..4825959a0efe 100644
--- a/drivers/net/pasemi_mac_ethtool.c
+++ b/drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c
diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
new file mode 100644
index 000000000000..a8669adecc97
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -0,0 +1,54 @@
+#
+# QLogic network device configuration
+#
+
+config NET_VENDOR_QLOGIC
+	bool "QLogic devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about QLogic cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_QLOGIC
+
+config QLA3XXX
+	tristate "QLogic QLA3XXX Network Driver Support"
+	depends on PCI
+	---help---
+	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qla3xxx.
+
+config QLCNIC
+	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
+	depends on PCI
+	select FW_LOADER
+	---help---
+	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+	  devices.
+
+config QLGE
+	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+	depends on PCI
+	---help---
+	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qlge.
+
+config NETXEN_NIC
+	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+	depends on PCI
+	select FW_LOADER
+	---help---
+	  This enables the support for NetXen's Gigabit Ethernet card.
+
+endif # NET_VENDOR_QLOGIC
diff --git a/drivers/net/ethernet/qlogic/Makefile b/drivers/net/ethernet/qlogic/Makefile
new file mode 100644
index 000000000000..b2a283d9ae60
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the QLogic network device drivers.
+#
+
+obj-$(CONFIG_QLA3XXX) += qla3xxx.o
+obj-$(CONFIG_QLCNIC) += qlcnic/
+obj-$(CONFIG_QLGE) += qlge/
+obj-$(CONFIG_NETXEN_NIC) += netxen/
diff --git a/drivers/net/netxen/Makefile b/drivers/net/ethernet/qlogic/netxen/Makefile
index 861a0590b1f4..861a0590b1f4 100644
--- a/drivers/net/netxen/Makefile
+++ b/drivers/net/ethernet/qlogic/netxen/Makefile
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
index f744d291218a..196b660e1d91 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
@@ -940,6 +940,11 @@ typedef struct nx_mac_list_s {
 	uint8_t mac_addr[ETH_ALEN+2];
 } nx_mac_list_t;
 
+struct nx_vlan_ip_list {
+	struct list_head list;
+	u32 ip_addr;
+};
+
 /*
  * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
  * adjusted based on configured MTU.
@@ -1165,6 +1170,7 @@ struct netxen_adapter {
 	struct net_device *netdev;
 	struct pci_dev *pdev;
 	struct list_head mac_list;
+	struct list_head vlan_ip_list;
 
 	spinlock_t tx_clean_lock;
 
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
index a925392abd6f..a925392abd6f 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
index b34fb74d07e3..b34fb74d07e3 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
index dc1967c1f312..dc1967c1f312 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
index 3f89e57cae50..3f89e57cae50 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h
index e2c5b6f2df03..e2c5b6f2df03 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
index e8993a76a080..d6c6357de6aa 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
@@ -26,6 +26,7 @@
 #include <linux/netdevice.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/if_vlan.h>
 #include "netxen_nic.h"
 #include "netxen_nic_hw.h"
 
@@ -1619,6 +1620,7 @@ netxen_process_lro(struct netxen_adapter *adapter,
 	int index;
 	u16 lro_length, length, data_offset;
 	u32 seq_number;
+	u8 vhdr_len;
 
 	if (unlikely(ring > adapter->max_rds_rings))
 		return NULL;
@@ -1652,8 +1654,10 @@ netxen_process_lro(struct netxen_adapter *adapter,
 	skb_pull(skb, l2_hdr_offset);
 	skb->protocol = eth_type_trans(skb, netdev);
 
-	iph = (struct iphdr *)skb->data;
-	th = (struct tcphdr *)(skb->data + (iph->ihl << 2));
+	if (skb->protocol == htons(ETH_P_8021Q))
+		vhdr_len = VLAN_HLEN;
+	iph = (struct iphdr *)(skb->data + vhdr_len);
+	th = (struct tcphdr *)((skb->data + vhdr_len) + (iph->ihl << 2));
 
 	length = (iph->ihl << 2) + (th->doff << 2) + lro_length;
 	iph->tot_len = htons(length);
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index f574edff7fcb..de18e4753b64 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -91,7 +91,8 @@ static irqreturn_t netxen_intr(int irq, void *data);
 static irqreturn_t netxen_msi_intr(int irq, void *data);
 static irqreturn_t netxen_msix_intr(int irq, void *data);
 
-static void netxen_config_indev_addr(struct net_device *dev, unsigned long);
+static void netxen_free_vlan_ip_list(struct netxen_adapter *);
+static void netxen_restore_indev_addr(struct net_device *dev, unsigned long);
 static struct rtnl_link_stats64 *netxen_nic_get_stats(struct net_device *dev,
 						      struct rtnl_link_stats64 *stats);
 static int netxen_nic_set_mac(struct net_device *netdev, void *p);
@@ -523,7 +524,7 @@ static const struct net_device_ops netxen_netdev_ops = {
 	.ndo_start_xmit    = netxen_nic_xmit_frame,
 	.ndo_get_stats64   = netxen_nic_get_stats,
 	.ndo_validate_addr = eth_validate_addr,
-	.ndo_set_multicast_list = netxen_set_multicast_list,
+	.ndo_set_rx_mode   = netxen_set_multicast_list,
 	.ndo_set_mac_address    = netxen_nic_set_mac,
 	.ndo_change_mtu	   = netxen_nic_change_mtu,
 	.ndo_tx_timeout	   = netxen_tx_timeout,
@@ -1359,6 +1360,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	spin_lock_init(&adapter->tx_clean_lock);
 	INIT_LIST_HEAD(&adapter->mac_list);
+	INIT_LIST_HEAD(&adapter->vlan_ip_list);
 
 	err = netxen_setup_pci_map(adapter);
 	if (err)
@@ -1481,6 +1483,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	cancel_work_sync(&adapter->tx_timeout_task);
 
+	netxen_free_vlan_ip_list(adapter);
 	netxen_nic_detach(adapter);
 
 	nx_decr_dev_ref_cnt(adapter);
@@ -1563,7 +1566,7 @@ static int netxen_nic_attach_func(struct pci_dev *pdev)
 		if (err)
 			goto err_out_detach;
 
-		netxen_config_indev_addr(netdev, NETDEV_UP);
+		netxen_restore_indev_addr(netdev, NETDEV_UP);
 	}
 
 	netif_device_attach(netdev);
@@ -2374,7 +2377,7 @@ netxen_attach_work(struct work_struct *work)
 			goto done;
 		}
 
-		netxen_config_indev_addr(netdev, NETDEV_UP);
+		netxen_restore_indev_addr(netdev, NETDEV_UP);
 	}
 
 	netif_device_attach(netdev);
@@ -2848,10 +2851,70 @@ netxen_destip_supported(struct netxen_adapter *adapter)
 }
 
 static void
-netxen_config_indev_addr(struct net_device *dev, unsigned long event)
+netxen_free_vlan_ip_list(struct netxen_adapter *adapter)
+{
+	struct nx_vlan_ip_list  *cur;
+	struct list_head *head = &adapter->vlan_ip_list;
+
+	while (!list_empty(head)) {
+		cur = list_entry(head->next, struct nx_vlan_ip_list, list);
+		netxen_config_ipaddr(adapter, cur->ip_addr, NX_IP_DOWN);
+		list_del(&cur->list);
+		kfree(cur);
+	}
+
+}
+static void
+netxen_list_config_vlan_ip(struct netxen_adapter *adapter,
+		struct in_ifaddr *ifa, unsigned long event)
+{
+	struct net_device *dev;
+	struct nx_vlan_ip_list *cur, *tmp_cur;
+	struct list_head *head;
+
+	dev = ifa->ifa_dev ? ifa->ifa_dev->dev : NULL;
+
+	if (dev == NULL)
+		return;
+
+	if (!is_vlan_dev(dev))
+		return;
+
+	switch (event) {
+	case NX_IP_UP:
+		list_for_each(head, &adapter->vlan_ip_list) {
+			cur = list_entry(head, struct nx_vlan_ip_list, list);
+
+			if (cur->ip_addr == ifa->ifa_address)
+				return;
+		}
+
+		cur = kzalloc(sizeof(struct nx_vlan_ip_list), GFP_ATOMIC);
+		if (cur == NULL) {
+			printk(KERN_ERR "%s: failed to add vlan ip to list\n",
+					adapter->netdev->name);
+			return;
+		}
+
+		cur->ip_addr = ifa->ifa_address;
+		list_add_tail(&cur->list, &adapter->vlan_ip_list);
+		break;
+	case NX_IP_DOWN:
+		list_for_each_entry_safe(cur, tmp_cur,
+					&adapter->vlan_ip_list, list) {
+			if (cur->ip_addr == ifa->ifa_address) {
+				list_del(&cur->list);
+				kfree(cur);
+				break;
+			}
+		}
+	}
+}
+static void
+netxen_config_indev_addr(struct netxen_adapter *adapter,
+		struct net_device *dev, unsigned long event)
 {
 	struct in_device *indev;
-	struct netxen_adapter *adapter = netdev_priv(dev);
 
 	if (!netxen_destip_supported(adapter))
 		return;
@@ -2865,10 +2928,12 @@ netxen_config_indev_addr(struct net_device *dev, unsigned long event)
 		case NETDEV_UP:
 			netxen_config_ipaddr(adapter,
 					ifa->ifa_address, NX_IP_UP);
+			netxen_list_config_vlan_ip(adapter, ifa, NX_IP_UP);
 			break;
 		case NETDEV_DOWN:
 			netxen_config_ipaddr(adapter,
 					ifa->ifa_address, NX_IP_DOWN);
+			netxen_list_config_vlan_ip(adapter, ifa, NX_IP_DOWN);
 			break;
 		default:
 			break;
@@ -2878,11 +2943,28 @@ netxen_config_indev_addr(struct net_device *dev, unsigned long event)
 	in_dev_put(indev);
 }
 
+static void
+netxen_restore_indev_addr(struct net_device *netdev, unsigned long event)
+
+{
+	struct netxen_adapter *adapter = netdev_priv(netdev);
+	struct nx_vlan_ip_list *pos, *tmp_pos;
+	unsigned long ip_event;
+
+	ip_event = (event == NETDEV_UP) ? NX_IP_UP : NX_IP_DOWN;
+	netxen_config_indev_addr(adapter, netdev, event);
+
+	list_for_each_entry_safe(pos, tmp_pos, &adapter->vlan_ip_list, list) {
+		netxen_config_ipaddr(adapter, pos->ip_addr, ip_event);
+	}
+}
+
 static int netxen_netdev_event(struct notifier_block *this,
 				 unsigned long event, void *ptr)
 {
 	struct netxen_adapter *adapter;
 	struct net_device *dev = (struct net_device *)ptr;
+	struct net_device *orig_dev = dev;
 
 recheck:
 	if (dev == NULL)
@@ -2904,7 +2986,7 @@ recheck:
 	if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
 		goto done;
 
-	netxen_config_indev_addr(dev, event);
+	netxen_config_indev_addr(adapter, orig_dev, event);
 done:
 	return NOTIFY_DONE;
 }
@@ -2921,7 +3003,7 @@ netxen_inetaddr_event(struct notifier_block *this,
 	dev = ifa->ifa_dev ? ifa->ifa_dev->dev : NULL;
 
 recheck:
-	if (dev == NULL || !netif_running(dev))
+	if (dev == NULL)
 		goto done;
 
 	if (dev->priv_flags & IFF_802_1Q_VLAN) {
@@ -2943,9 +3025,11 @@ recheck:
 	switch (event) {
 	case NETDEV_UP:
 		netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_UP);
+		netxen_list_config_vlan_ip(adapter, ifa, NX_IP_UP);
 		break;
 	case NETDEV_DOWN:
 		netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_DOWN);
+		netxen_list_config_vlan_ip(adapter, ifa, NX_IP_DOWN);
 		break;
 	default:
 		break;
@@ -2964,7 +3048,10 @@ static struct notifier_block netxen_inetaddr_cb = {
 };
 #else
 static void
-netxen_config_indev_addr(struct net_device *dev, unsigned long event)
+netxen_restore_indev_addr(struct net_device *dev, unsigned long event)
+{ }
+static void
+netxen_free_vlan_ip_list(struct netxen_adapter *adapter)
 { }
 #endif
 
diff --git a/drivers/net/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index 2f6914025efc..8cab61c08c8d 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -1650,7 +1650,7 @@ static int ql_mii_setup(struct ql3_adapter *qdev)
 				 SUPPORTED_1000baseT_Half |	\
 				 SUPPORTED_1000baseT_Full |	\
 				 SUPPORTED_Autoneg |		\
-				 SUPPORTED_TP);			\
+				 SUPPORTED_TP)			\
 
 static u32 ql_supported_modes(struct ql3_adapter *qdev)
 {
@@ -3762,7 +3762,6 @@ static const struct net_device_ops ql3xxx_netdev_ops = {
 	.ndo_open		= ql3xxx_open,
 	.ndo_start_xmit		= ql3xxx_send,
 	.ndo_stop		= ql3xxx_close,
-	.ndo_set_multicast_list = NULL, /* not allowed on NIC side */
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ql3xxx_set_mac_address,
diff --git a/drivers/net/qla3xxx.h b/drivers/net/ethernet/qlogic/qla3xxx.h
index 73e234366a82..73e234366a82 100644
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/ethernet/qlogic/qla3xxx.h
diff --git a/drivers/net/qlcnic/Makefile b/drivers/net/ethernet/qlogic/qlcnic/Makefile
index ddba83ef3f44..ddba83ef3f44 100644
--- a/drivers/net/qlcnic/Makefile
+++ b/drivers/net/ethernet/qlogic/qlcnic/Makefile
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index baf646d98fa0..53c6e5dcf26c 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -36,8 +36,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 21
-#define QLCNIC_LINUX_VERSIONID  "5.0.21"
+#define _QLCNIC_LINUX_SUBVERSION 22
+#define QLCNIC_LINUX_VERSIONID  "5.0.22"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
 		 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
@@ -911,6 +911,7 @@ struct qlcnic_ipaddr {
 #define QLCNIC_PROMISC_DISABLED		0x800
 #define QLCNIC_NEED_FLR			0x1000
 #define QLCNIC_FW_RESET_OWNER		0x2000
+#define QLCNIC_FW_HANG			0x4000
 #define QLCNIC_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
 
@@ -1344,6 +1345,7 @@ enum op_codes {
 #define QLCNIC_FORCE_FW_DUMP_KEY	0xdeadfeed
 #define QLCNIC_ENABLE_FW_DUMP		0xaddfeed
 #define QLCNIC_DISABLE_FW_DUMP		0xbadfeed
+#define QLCNIC_FORCE_FW_RESET		0xdeaddead
 
 struct qlcnic_dump_operations {
 	enum op_codes opcode;
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index b0d32ddd2ccb..b0d32ddd2ccb 100644
--- a/drivers/net/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 72a723d5c988..7c64f2ffc219 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1105,7 +1105,10 @@ qlcnic_get_dump_flag(struct net_device *netdev, struct ethtool_dump *dump)
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
 
-	dump->len = fw_dump->tmpl_hdr->size + fw_dump->size;
+	if (fw_dump->clr)
+		dump->len = fw_dump->tmpl_hdr->size + fw_dump->size;
+	else
+		dump->len = 0;
 	dump->flag = fw_dump->tmpl_hdr->drv_cap_mask;
 	dump->version = adapter->fw_version;
 	return 0;
@@ -1152,7 +1155,8 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
 
-	if (val->flag == QLCNIC_FORCE_FW_DUMP_KEY) {
+	switch (val->flag) {
+	case QLCNIC_FORCE_FW_DUMP_KEY:
 		if (!fw_dump->enable) {
 			netdev_info(netdev, "FW dump not enabled\n");
 			return ret;
@@ -1164,17 +1168,25 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 		}
 		netdev_info(netdev, "Forcing a FW dump\n");
 		qlcnic_dev_request_reset(adapter);
-	} else if (val->flag == QLCNIC_DISABLE_FW_DUMP) {
+		break;
+	case QLCNIC_DISABLE_FW_DUMP:
 		if (fw_dump->enable) {
 			netdev_info(netdev, "Disabling FW dump\n");
 			fw_dump->enable = 0;
 		}
-	} else if (val->flag == QLCNIC_ENABLE_FW_DUMP) {
+		break;
+	case QLCNIC_ENABLE_FW_DUMP:
 		if (!fw_dump->enable && fw_dump->tmpl_hdr) {
 			netdev_info(netdev, "Enabling FW dump\n");
 			fw_dump->enable = 1;
 		}
-	} else {
+		break;
+	case QLCNIC_FORCE_FW_RESET:
+		netdev_info(netdev, "Forcing a FW reset\n");
+		qlcnic_dev_request_reset(adapter);
+		adapter->flags &= ~QLCNIC_FW_RESET_OWNER;
+		break;
+	default:
 		if (val->flag > QLCNIC_DUMP_MASK_MAX ||
 			val->flag < QLCNIC_DUMP_MASK_MIN) {
 				netdev_info(netdev,
diff --git a/drivers/net/qlcnic/qlcnic_hdr.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
index d14506f764e0..d14506f764e0 100644
--- a/drivers/net/qlcnic/qlcnic_hdr.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 4055c218ef2a..74e9d7b94965 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -1773,8 +1773,8 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 		goto error;
 	} else {
 		fw_dump->clr = 1;
-		snprintf(mesg, sizeof(mesg), "FW dump for device: %d\n",
-			adapter->pdev->devfn);
+		snprintf(mesg, sizeof(mesg), "FW_DUMP=%s",
+			adapter->netdev->name);
 		dev_info(&adapter->pdev->dev, "Dump data, %d bytes captured\n",
 			fw_dump->size);
 		/* Send a udev event to notify availability of FW dump */
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
index ee8a3982395e..3b6741e4754d 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
@@ -1056,7 +1056,8 @@ qlcnic_check_fw_hearbeat(struct qlcnic_adapter *adapter)
 int
 qlcnic_need_fw_reset(struct qlcnic_adapter *adapter)
 {
-	if (qlcnic_check_fw_hearbeat(adapter)) {
+	if ((adapter->flags & QLCNIC_FW_HANG) ||
+			qlcnic_check_fw_hearbeat(adapter)) {
 		qlcnic_rom_lock_recovery(adapter);
 		return 1;
 	}
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 5ca1b562443c..b447cc50693a 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -325,7 +325,7 @@ static const struct net_device_ops qlcnic_netdev_ops = {
 	.ndo_start_xmit    = qlcnic_xmit_frame,
 	.ndo_get_stats	   = qlcnic_get_stats,
 	.ndo_validate_addr = eth_validate_addr,
-	.ndo_set_multicast_list = qlcnic_set_multi,
+	.ndo_set_rx_mode   = qlcnic_set_multi,
 	.ndo_set_mac_address    = qlcnic_set_mac,
 	.ndo_change_mtu	   = qlcnic_change_mtu,
 	.ndo_fix_features  = qlcnic_fix_features,
@@ -643,8 +643,11 @@ static void get_brd_name(struct qlcnic_adapter *adapter, char *name)
 static void
 qlcnic_check_options(struct qlcnic_adapter *adapter)
 {
-	u32 fw_major, fw_minor, fw_build;
+	u32 fw_major, fw_minor, fw_build, prev_fw_version;
 	struct pci_dev *pdev = adapter->pdev;
+	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+
+	prev_fw_version = adapter->fw_version;
 
 	fw_major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR);
 	fw_minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR);
@@ -652,6 +655,17 @@ qlcnic_check_options(struct qlcnic_adapter *adapter)
 
 	adapter->fw_version = QLCNIC_VERSION_CODE(fw_major, fw_minor, fw_build);
 
+	if (adapter->op_mode != QLCNIC_NON_PRIV_FUNC) {
+		if (fw_dump->tmpl_hdr == NULL ||
+				adapter->fw_version > prev_fw_version) {
+			if (fw_dump->tmpl_hdr)
+				vfree(fw_dump->tmpl_hdr);
+			if (!qlcnic_fw_cmd_get_minidump_temp(adapter))
+				dev_info(&pdev->dev,
+					"Supports FW dump capability\n");
+		}
+	}
+
 	dev_info(&pdev->dev, "firmware v%d.%d.%d\n",
 			fw_major, fw_minor, fw_build);
 	if (adapter->ahw->port_type == QLCNIC_XGBE) {
@@ -1610,12 +1624,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_decr_ref;
 	}
 
-	/* Get FW dump template and store it */
-	if (adapter->op_mode != QLCNIC_NON_PRIV_FUNC)
-		if (!qlcnic_fw_cmd_get_minidump_temp(adapter))
-			dev_info(&pdev->dev,
-				"Supports FW dump capability\n");
-
 	if (qlcnic_read_mac_addr(adapter))
 		dev_warn(&pdev->dev, "failed to read mac addr\n");
 
@@ -2682,6 +2690,7 @@ qlcnic_clr_all_drv_state(struct qlcnic_adapter *adapter, u8 failed)
 	qlcnic_api_unlock(adapter);
 err:
 	adapter->fw_fail_cnt = 0;
+	adapter->flags &= ~QLCNIC_FW_HANG;
 	clear_bit(__QLCNIC_START_FW, &adapter->state);
 	clear_bit(__QLCNIC_RESETTING, &adapter->state);
 }
@@ -2859,6 +2868,7 @@ skip_ack_check:
 		    (adapter->flags & QLCNIC_FW_RESET_OWNER)) {
 			QLCDB(adapter, DRV, "Take FW dump\n");
 			qlcnic_dump_fw(adapter);
+			adapter->flags |= QLCNIC_FW_HANG;
 		}
 		rtnl_unlock();
 
@@ -3046,6 +3056,7 @@ attach:
 done:
 	netif_device_attach(netdev);
 	adapter->fw_fail_cnt = 0;
+	adapter->flags &= ~QLCNIC_FW_HANG;
 	clear_bit(__QLCNIC_RESETTING, &adapter->state);
 
 	if (!qlcnic_clr_drv_state(adapter))
@@ -3090,13 +3101,26 @@ qlcnic_check_health(struct qlcnic_adapter *adapter)
 	if (++adapter->fw_fail_cnt < FW_FAIL_THRESH)
 		return 0;
 
+	adapter->flags |= QLCNIC_FW_HANG;
+
 	qlcnic_dev_request_reset(adapter);
 
 	if (auto_fw_reset)
 		clear_bit(__QLCNIC_FW_ATTACHED, &adapter->state);
 
 	dev_info(&netdev->dev, "firmware hang detected\n");
-
+	dev_info(&adapter->pdev->dev, "Dumping hw/fw registers\n"
+			"PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n"
+			"PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n"
+			"PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n"
+			"PEG_NET_4_PC: 0x%x\n",
+			QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS1),
+			QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS2),
+			QLCRD32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x3c),
+			QLCRD32(adapter, QLCNIC_CRB_PEG_NET_1 + 0x3c),
+			QLCRD32(adapter, QLCNIC_CRB_PEG_NET_2 + 0x3c),
+			QLCRD32(adapter, QLCNIC_CRB_PEG_NET_3 + 0x3c),
+			QLCRD32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x3c));
 detach:
 	adapter->dev_state = (state == QLCNIC_DEV_NEED_QUISCENT) ? state :
 		QLCNIC_DEV_NEED_RESET;
diff --git a/drivers/net/qlge/Makefile b/drivers/net/ethernet/qlogic/qlge/Makefile
index 8a197658d76f..8a197658d76f 100644
--- a/drivers/net/qlge/Makefile
+++ b/drivers/net/ethernet/qlogic/qlge/Makefile
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h
index 8731f79c9efc..8731f79c9efc 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/ethernet/qlogic/qlge/qlge.h
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
index fca804f36d61..fca804f36d61 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/ethernet/qlogic/qlge/qlge_ethtool.c
index 9b67bfea035f..9b67bfea035f 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_ethtool.c
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index f07e96ec8843..39360c485867 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
@@ -4676,7 +4676,7 @@ static const struct net_device_ops qlge_netdev_ops = {
 	.ndo_start_xmit		= qlge_send,
 	.ndo_change_mtu		= qlge_change_mtu,
 	.ndo_get_stats		= qlge_get_stats,
-	.ndo_set_multicast_list = qlge_set_multicast_list,
+	.ndo_set_rx_mode	= qlge_set_multicast_list,
 	.ndo_set_mac_address	= qlge_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_tx_timeout		= qlge_tx_timeout,
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c
index ff2bf8a4e247..ff2bf8a4e247 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c
diff --git a/drivers/net/ethernet/racal/Kconfig b/drivers/net/ethernet/racal/Kconfig
new file mode 100644
index 000000000000..01969e0a9c68
--- /dev/null
+++ b/drivers/net/ethernet/racal/Kconfig
@@ -0,0 +1,33 @@
+#
+# Racal-Interlan device configuration
+#
+
+config NET_VENDOR_RACAL
+	bool "Racal-Interlan (Micom) NI devices"
+	default y
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, such
+	  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about NI cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_RACAL
+
+config NI5010
+	tristate "NI5010 support (EXPERIMENTAL)"
+	depends on ISA && EXPERIMENTAL && BROKEN_ON_SMP
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Note that this is still
+	  experimental code.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni5010.
+
+endif # NET_VENDOR_RACAL
diff --git a/drivers/net/ethernet/racal/Makefile b/drivers/net/ethernet/racal/Makefile
new file mode 100644
index 000000000000..1e210ca1d78b
--- /dev/null
+++ b/drivers/net/ethernet/racal/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Racal-Interlan network device drivers.
+#
+
+obj-$(CONFIG_NI5010) += ni5010.o
diff --git a/drivers/net/ni5010.c b/drivers/net/ethernet/racal/ni5010.c
index 4d3f2e2b28bd..072810da9a37 100644
--- a/drivers/net/ni5010.c
+++ b/drivers/net/ethernet/racal/ni5010.c
@@ -192,7 +192,7 @@ static const struct net_device_ops ni5010_netdev_ops = {
 	.ndo_open		= ni5010_open,
 	.ndo_stop		= ni5010_close,
 	.ndo_start_xmit		= ni5010_send_packet,
-	.ndo_set_multicast_list	= ni5010_set_multicast_list,
+	.ndo_set_rx_mode	= ni5010_set_multicast_list,
 	.ndo_tx_timeout		= ni5010_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/ni5010.h b/drivers/net/ethernet/racal/ni5010.h
index e10e717fcd76..e10e717fcd76 100644
--- a/drivers/net/ni5010.h
+++ b/drivers/net/ethernet/racal/ni5010.h
diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig
new file mode 100644
index 000000000000..2055f7eb2ba9
--- /dev/null
+++ b/drivers/net/ethernet/rdc/Kconfig
@@ -0,0 +1,34 @@
+#
+# RDC network device configuration
+#
+
+config NET_VENDOR_RDC
+	bool "RDC devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about RDC cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_RDC
+
+config R6040
+	tristate "RDC R6040 Fast Ethernet Adapter support"
+	depends on PCI
+	select CRC32
+	select MII
+	select PHYLIB
+	---help---
+	  This is a driver for the R6040 Fast Ethernet MACs found in the
+	  the RDC R-321x System-on-chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called r6040. This is recommended.
+
+endif # NET_VENDOR_RDC
diff --git a/drivers/net/ethernet/rdc/Makefile b/drivers/net/ethernet/rdc/Makefile
new file mode 100644
index 000000000000..8d51fd2d07fc
--- /dev/null
+++ b/drivers/net/ethernet/rdc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RDC network device drivers.
+#
+
+obj-$(CONFIG_R6040) += r6040.o
diff --git a/drivers/net/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index b64fcee483aa..2bbadc044784 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -982,7 +982,7 @@ static const struct net_device_ops r6040_netdev_ops = {
 	.ndo_stop		= r6040_close,
 	.ndo_start_xmit		= r6040_start_xmit,
 	.ndo_get_stats		= r6040_get_stats,
-	.ndo_set_multicast_list = r6040_multicast_list,
+	.ndo_set_rx_mode	= r6040_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index cc4c210a91f8..5d2d1b8678f6 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -1785,7 +1785,7 @@ static const struct net_device_ops cp_netdev_ops = {
 	.ndo_stop		= cp_close,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= cp_set_mac_address,
-	.ndo_set_multicast_list	= cp_set_rx_mode,
+	.ndo_set_rx_mode	= cp_set_rx_mode,
 	.ndo_get_stats		= cp_get_stats,
 	.ndo_do_ioctl		= cp_ioctl,
 	.ndo_start_xmit		= cp_start_xmit,
diff --git a/drivers/net/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index c2672c692d6f..4d6b254fc6c1 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -916,7 +916,7 @@ static const struct net_device_ops rtl8139_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= rtl8139_set_mac_address,
 	.ndo_start_xmit		= rtl8139_start_xmit,
-	.ndo_set_multicast_list	= rtl8139_set_rx_mode,
+	.ndo_set_rx_mode	= rtl8139_set_rx_mode,
 	.ndo_do_ioctl		= netdev_ioctl,
 	.ndo_tx_timeout		= rtl8139_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
new file mode 100644
index 000000000000..d8df67ac51b9
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -0,0 +1,127 @@
+#
+# Realtek device configuration
+#
+
+config NET_VENDOR_REALTEK
+	bool "Realtek devices"
+	default y
+	depends on PCI || (PARPORT && X86)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Realtek devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_REALTEK
+
+config ATP
+	tristate "AT-LAN-TEC/RealTek pocket adapter support"
+	depends on PARPORT && X86
+	select CRC32
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>, if you
+	  want to use this.  If you intend to use this driver, you should have
+	  said N to the "Parallel printer support", because the two drivers
+	  don't like each other.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called atp.
+
+config 8139CP
+	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL8139C+ chips. If you have one of those, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139cp.  This is recommended.
+
+config 8139TOO
+	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139too.  This is recommended.
+
+config 8139TOO_PIO
+	bool "Use PIO instead of MMIO"
+	default y
+	depends on 8139TOO
+	---help---
+	  This instructs the driver to use programmed I/O ports (PIO) instead
+	  of PCI shared memory (MMIO).  This can possibly solve some problems
+	  in case your mainboard has memory consistency issues.  If unsure,
+	  say N.
+
+config 8139TOO_TUNE_TWISTER
+	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
+	depends on 8139TOO
+	---help---
+	  This implements a function which might come in handy in case you
+	  are using low quality on long cabling. It is required for RealTek
+	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
+	  to match the transceiver to the cable characteristics. This is
+	  experimental since hardly documented by the manufacturer.
+	  If unsure, say Y.
+
+config 8139TOO_8129
+	bool "Support for older RTL-8129/8130 boards"
+	depends on 8139TOO
+	---help---
+	  This enables support for the older and uncommon RTL-8129 and
+	  RTL-8130 chips, which support MII via an external transceiver,
+	  instead of an internal one.  Disabling this option will save some
+	  memory by making the code size smaller.  If unsure, say Y.
+
+config 8139_OLD_RX_RESET
+	bool "Use older RX-reset method"
+	depends on 8139TOO
+	---help---
+	  The 8139too driver was recently updated to contain a more rapid
+	  reset sequence, in the face of severe receive errors.  This "new"
+	  RX-reset method should be adequate for all boards.  But if you
+	  experience problems, you can enable this option to restore the
+	  old RX-reset behavior.  If unsure, say N.
+
+config R8169
+	tristate "Realtek 8169 gigabit ethernet support"
+	depends on PCI
+	select FW_LOADER
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called r8169.  This is recommended.
+
+config SC92031
+	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+	  have one of these, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sc92031.  This is recommended.
+
+endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
new file mode 100644
index 000000000000..e48cfb6ac42d
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Realtek network device drivers.
+#
+
+obj-$(CONFIG_8139CP) += 8139cp.o
+obj-$(CONFIG_8139TOO) += 8139too.o
+obj-$(CONFIG_ATP) += atp.o
+obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/atp.c b/drivers/net/ethernet/realtek/atp.c
index f3459798b0e9..e3f57fdbf0ea 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/ethernet/realtek/atp.c
@@ -245,7 +245,7 @@ static const struct net_device_ops atp_netdev_ops = {
 	.ndo_open		= net_open,
 	.ndo_stop		= net_close,
 	.ndo_start_xmit		= atp_send_packet,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_tx_timeout		= tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/atp.h b/drivers/net/ethernet/realtek/atp.h
index 0edc642c2c2f..0edc642c2c2f 100644
--- a/drivers/net/atp.h
+++ b/drivers/net/ethernet/realtek/atp.h
diff --git a/drivers/net/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 7d9c650f395e..1cf8c3c1328d 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -239,6 +239,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8168), 0, 0, RTL_CFG_1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8169), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK,	0x4300), 0, 0, RTL_CFG_0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK,	0x4302), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AT,		0xc107), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(0x16ec,			0x0116), 0, 0, RTL_CFG_0 },
 	{ PCI_VENDOR_ID_LINKSYS,		0x1032,
@@ -1091,6 +1092,21 @@ rtl_w1w0_eri(void __iomem *ioaddr, int addr, u32 mask, u32 p, u32 m, int type)
 	rtl_eri_write(ioaddr, addr, mask, (val & ~m) | p, type);
 }
 
+struct exgmac_reg {
+	u16 addr;
+	u16 mask;
+	u32 val;
+};
+
+static void rtl_write_exgmac_batch(void __iomem *ioaddr,
+				   const struct exgmac_reg *r, int len)
+{
+	while (len-- > 0) {
+		rtl_eri_write(ioaddr, r->addr, r->mask, r->val, ERIAR_EXGMAC);
+		r++;
+	}
+}
+
 static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr)
 {
 	u8 value = 0xff;
@@ -3116,6 +3132,18 @@ static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
 	RTL_W32(MAC0, low);
 	RTL_R32(MAC0);
 
+	if (tp->mac_version == RTL_GIGA_MAC_VER_34) {
+		const struct exgmac_reg e[] = {
+			{ .addr = 0xe0, ERIAR_MASK_1111, .val = low },
+			{ .addr = 0xe4, ERIAR_MASK_1111, .val = high },
+			{ .addr = 0xf0, ERIAR_MASK_1111, .val = low << 16 },
+			{ .addr = 0xf4, ERIAR_MASK_1111, .val = high << 16 |
+								low  >> 16 },
+		};
+
+		rtl_write_exgmac_batch(ioaddr, e, ARRAY_SIZE(e));
+	}
+
 	RTL_W8(Cfg9346, Cfg9346_Lock);
 
 	spin_unlock_irq(&tp->lock);
@@ -3249,7 +3277,7 @@ static const struct net_device_ops rtl8169_netdev_ops = {
 	.ndo_set_features	= rtl8169_set_features,
 	.ndo_set_mac_address	= rtl_set_mac_address,
 	.ndo_do_ioctl		= rtl8169_ioctl,
-	.ndo_set_multicast_list	= rtl_set_rx_mode,
+	.ndo_set_rx_mode	= rtl_set_rx_mode,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= rtl8169_netpoll,
 #endif
diff --git a/drivers/net/sc92031.c b/drivers/net/ethernet/realtek/sc92031.c
index 9da47337b7c3..128f8ebb81ec 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/ethernet/realtek/sc92031.c
@@ -1390,7 +1390,7 @@ static const struct net_device_ops sc92031_netdev_ops = {
 	.ndo_start_xmit		= sc92031_start_xmit,
 	.ndo_open		= sc92031_open,
 	.ndo_stop		= sc92031_stop,
-	.ndo_set_multicast_list	= sc92031_set_multicast_list,
+	.ndo_set_rx_mode	= sc92031_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
new file mode 100644
index 000000000000..f57ae230817b
--- /dev/null
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -0,0 +1,18 @@
+#
+# Renesas device configuration
+#
+
+config SH_ETH
+	tristate "Renesas SuperH Ethernet support"
+	depends on SUPERH && \
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
+		 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
+		 CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757)
+	select CRC32
+	select MII
+	select MDIO_BITBANG
+	select PHYLIB
+	---help---
+	  Renesas SuperH Ethernet device driver.
+	  This driver supporting CPUs are:
+		- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
diff --git a/drivers/net/ethernet/renesas/Makefile b/drivers/net/ethernet/renesas/Makefile
new file mode 100644
index 000000000000..1c278a8e066a
--- /dev/null
+++ b/drivers/net/ethernet/renesas/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Renesas device drivers.
+#
+
+obj-$(CONFIG_SH_ETH) += sh_eth.o
diff --git a/drivers/net/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index ad35c210b839..bf2404ae3b87 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
@@ -1758,7 +1759,7 @@ static const struct net_device_ops sh_eth_netdev_ops = {
 	.ndo_start_xmit		= sh_eth_start_xmit,
 	.ndo_get_stats		= sh_eth_get_stats,
 #if defined(SH_ETH_HAS_TSU)
-	.ndo_set_multicast_list	= sh_eth_set_multicast_list,
+	.ndo_set_rx_mode	= sh_eth_set_multicast_list,
 #endif
 	.ndo_tx_timeout		= sh_eth_tx_timeout,
 	.ndo_do_ioctl		= sh_eth_do_ioctl,
diff --git a/drivers/net/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h
index c3048a6ba676..c3048a6ba676 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
diff --git a/drivers/net/s6gmac.c b/drivers/net/ethernet/s6gmac.c
index a7ff8ea342b4..a7ff8ea342b4 100644
--- a/drivers/net/s6gmac.c
+++ b/drivers/net/ethernet/s6gmac.c
diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig
new file mode 100644
index 000000000000..49b6d5b1dfd2
--- /dev/null
+++ b/drivers/net/ethernet/seeq/Kconfig
@@ -0,0 +1,46 @@
+#
+# SEEQ device configuration
+#
+
+config NET_VENDOR_SEEQ
+	bool "SEEQ devices"
+	default y
+	depends on (ARM && ARCH_ACORN) || SGI_HAS_SEEQ || EXPERIMENTAL
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about SEEQ devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_SEEQ
+
+config ARM_ETHER3
+	tristate "Acorn/ANT Ether3 support"
+	depends on ARM && ARCH_ACORN
+	---help---
+	  If you have an Acorn system with one of these network cards, you
+	  should say Y to this option if you wish to use it with Linux.
+
+config SEEQ8005
+	tristate "SEEQ8005 support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  This is a driver for the SEEQ 8005 network (Ethernet) card.  If this
+	  is for you, read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called seeq8005.
+
+config SGISEEQ
+	tristate "SGI Seeq ethernet controller support"
+	depends on SGI_HAS_SEEQ
+	---help---
+	  Say Y here if you have an Seeq based Ethernet network card. This is
+	  used in many Silicon Graphics machines.
+
+endif # NET_VENDOR_SEEQ
diff --git a/drivers/net/ethernet/seeq/Makefile b/drivers/net/ethernet/seeq/Makefile
new file mode 100644
index 000000000000..3e258a580c05
--- /dev/null
+++ b/drivers/net/ethernet/seeq/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the SEEQ network device drivers
+#
+
+obj-$(CONFIG_ARM_ETHER3) += ether3.o
+obj-$(CONFIG_SEEQ8005) += seeq8005.o
+obj-$(CONFIG_SGISEEQ) += sgiseeq.o
diff --git a/drivers/net/arm/ether3.c b/drivers/net/ethernet/seeq/ether3.c
index 44a8746f4014..893c880dadf0 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/ethernet/seeq/ether3.c
@@ -761,7 +761,7 @@ static const struct net_device_ops ether3_netdev_ops = {
 	.ndo_open		= ether3_open,
 	.ndo_stop		= ether3_close,
 	.ndo_start_xmit		= ether3_sendpacket,
-	.ndo_set_multicast_list	= ether3_setmulticastlist,
+	.ndo_set_rx_mode	= ether3_setmulticastlist,
 	.ndo_tx_timeout		= ether3_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/arm/ether3.h b/drivers/net/ethernet/seeq/ether3.h
index 2db63b08bdf3..2db63b08bdf3 100644
--- a/drivers/net/arm/ether3.h
+++ b/drivers/net/ethernet/seeq/ether3.h
diff --git a/drivers/net/seeq8005.c b/drivers/net/ethernet/seeq/seeq8005.c
index d2fce98f557f..60561451789b 100644
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/ethernet/seeq/seeq8005.c
@@ -148,7 +148,7 @@ static const struct net_device_ops seeq8005_netdev_ops = {
 	.ndo_stop		= seeq8005_close,
 	.ndo_start_xmit 	= seeq8005_send_packet,
 	.ndo_tx_timeout		= seeq8005_timeout,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/seeq8005.h b/drivers/net/ethernet/seeq/seeq8005.h
index 5dfb0098c6ca..5dfb0098c6ca 100644
--- a/drivers/net/seeq8005.h
+++ b/drivers/net/ethernet/seeq/seeq8005.h
diff --git a/drivers/net/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c
index 52fb7ed9f365..c3673f151a41 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/ethernet/seeq/sgiseeq.c
@@ -715,7 +715,7 @@ static const struct net_device_ops sgiseeq_netdev_ops = {
 	.ndo_stop		= sgiseeq_close,
 	.ndo_start_xmit		= sgiseeq_start_xmit,
 	.ndo_tx_timeout		= timeout,
-	.ndo_set_multicast_list	= sgiseeq_set_multicast,
+	.ndo_set_rx_mode	= sgiseeq_set_multicast,
 	.ndo_set_mac_address	= sgiseeq_set_mac_address,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/sgiseeq.h b/drivers/net/ethernet/seeq/sgiseeq.h
index 2211e2987a8d..2211e2987a8d 100644
--- a/drivers/net/sgiseeq.h
+++ b/drivers/net/ethernet/seeq/sgiseeq.h
diff --git a/drivers/net/sfc/Kconfig b/drivers/net/ethernet/sfc/Kconfig
index a3d5bb9e39dc..5d18841f0f3d 100644
--- a/drivers/net/sfc/Kconfig
+++ b/drivers/net/ethernet/sfc/Kconfig
@@ -5,7 +5,7 @@ config SFC
 	select CRC32
 	select I2C
 	select I2C_ALGOBIT
-	help
+	---help---
 	  This driver supports 10-gigabit Ethernet cards based on
 	  the Solarflare SFC4000 and SFC9000-family controllers.
 
@@ -15,7 +15,7 @@ config SFC_MTD
 	bool "Solarflare SFC4000/SFC9000-family MTD support"
 	depends on SFC && MTD && !(SFC=y && MTD=m)
 	default y
-	help
+	---help---
 	  This exposes the on-board flash memory as MTD devices (e.g.
 	  /dev/mtd1).  This makes it possible to upload new firmware
 	  to the NIC.
diff --git a/drivers/net/sfc/Makefile b/drivers/net/ethernet/sfc/Makefile
index ab31c7124db1..ab31c7124db1 100644
--- a/drivers/net/sfc/Makefile
+++ b/drivers/net/ethernet/sfc/Makefile
diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/ethernet/sfc/bitfield.h
index 098ac2ad757d..098ac2ad757d 100644
--- a/drivers/net/sfc/bitfield.h
+++ b/drivers/net/ethernet/sfc/bitfield.h
diff --git a/drivers/net/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index faca764aa21b..b6b0e71f7fc8 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -1903,7 +1903,7 @@ static const struct net_device_ops efx_netdev_ops = {
 	.ndo_do_ioctl		= efx_ioctl,
 	.ndo_change_mtu		= efx_change_mtu,
 	.ndo_set_mac_address	= efx_set_mac_address,
-	.ndo_set_multicast_list = efx_set_multicast_list,
+	.ndo_set_rx_mode	= efx_set_multicast_list,
 	.ndo_set_features	= efx_set_features,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = efx_netpoll,
diff --git a/drivers/net/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h
index b0d1209ea18d..b0d1209ea18d 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/ethernet/sfc/efx.h
diff --git a/drivers/net/sfc/enum.h b/drivers/net/ethernet/sfc/enum.h
index d725a8fbe1a6..d725a8fbe1a6 100644
--- a/drivers/net/sfc/enum.h
+++ b/drivers/net/ethernet/sfc/enum.h
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c
index bc4643af6dd1..bc4643af6dd1 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/ethernet/sfc/falcon.c
index 94bf4aaf984d..94bf4aaf984d 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/ethernet/sfc/falcon_boards.c
index b9cc846811d6..b9cc846811d6 100644
--- a/drivers/net/sfc/falcon_boards.c
+++ b/drivers/net/ethernet/sfc/falcon_boards.c
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/ethernet/sfc/falcon_xmac.c
index 9516452c079c..9516452c079c 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/ethernet/sfc/falcon_xmac.c
diff --git a/drivers/net/sfc/filter.c b/drivers/net/ethernet/sfc/filter.c
index 2b9636f96e05..2b9636f96e05 100644
--- a/drivers/net/sfc/filter.c
+++ b/drivers/net/ethernet/sfc/filter.c
diff --git a/drivers/net/sfc/filter.h b/drivers/net/ethernet/sfc/filter.h
index 872f2132a496..872f2132a496 100644
--- a/drivers/net/sfc/filter.h
+++ b/drivers/net/ethernet/sfc/filter.h
diff --git a/drivers/net/sfc/io.h b/drivers/net/ethernet/sfc/io.h
index cc978803d484..cc978803d484 100644
--- a/drivers/net/sfc/io.h
+++ b/drivers/net/ethernet/sfc/io.h
diff --git a/drivers/net/sfc/mac.h b/drivers/net/ethernet/sfc/mac.h
index d6a255d0856b..d6a255d0856b 100644
--- a/drivers/net/sfc/mac.h
+++ b/drivers/net/ethernet/sfc/mac.h
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c
index 3dd45ed61f0a..3dd45ed61f0a 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/ethernet/sfc/mcdi.c
diff --git a/drivers/net/sfc/mcdi.h b/drivers/net/ethernet/sfc/mcdi.h
index aced2a7856fc..aced2a7856fc 100644
--- a/drivers/net/sfc/mcdi.h
+++ b/drivers/net/ethernet/sfc/mcdi.h
diff --git a/drivers/net/sfc/mcdi_mac.c b/drivers/net/ethernet/sfc/mcdi_mac.c
index 50c20777a564..50c20777a564 100644
--- a/drivers/net/sfc/mcdi_mac.c
+++ b/drivers/net/ethernet/sfc/mcdi_mac.c
diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h
index 41fe06fa0600..41fe06fa0600 100644
--- a/drivers/net/sfc/mcdi_pcol.h
+++ b/drivers/net/ethernet/sfc/mcdi_pcol.h
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/ethernet/sfc/mcdi_phy.c
index 6c63ab0710af..6c63ab0710af 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/ethernet/sfc/mcdi_phy.c
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/ethernet/sfc/mdio_10g.c
index 7ab385c8136d..7ab385c8136d 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/ethernet/sfc/mdio_10g.c
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/ethernet/sfc/mdio_10g.h
index a97dbbd2de99..a97dbbd2de99 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/ethernet/sfc/mdio_10g.h
diff --git a/drivers/net/sfc/mtd.c b/drivers/net/ethernet/sfc/mtd.c
index b6304486f244..b6304486f244 100644
--- a/drivers/net/sfc/mtd.c
+++ b/drivers/net/ethernet/sfc/mtd.c
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index b8e251a1ee48..b8e251a1ee48 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
diff --git a/drivers/net/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c
index bafa23a6874c..bafa23a6874c 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/ethernet/sfc/nic.c
diff --git a/drivers/net/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h
index 4bd1f2839dfe..4bd1f2839dfe 100644
--- a/drivers/net/sfc/nic.h
+++ b/drivers/net/ethernet/sfc/nic.h
diff --git a/drivers/net/sfc/phy.h b/drivers/net/ethernet/sfc/phy.h
index 11d148cd8441..11d148cd8441 100644
--- a/drivers/net/sfc/phy.h
+++ b/drivers/net/ethernet/sfc/phy.h
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/ethernet/sfc/qt202x_phy.c
index 7ad97e397406..7ad97e397406 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/ethernet/sfc/qt202x_phy.c
diff --git a/drivers/net/sfc/regs.h b/drivers/net/ethernet/sfc/regs.h
index cc2c86b76a7b..cc2c86b76a7b 100644
--- a/drivers/net/sfc/regs.h
+++ b/drivers/net/ethernet/sfc/regs.h
diff --git a/drivers/net/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c
index 62e43649466e..62e43649466e 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/ethernet/sfc/rx.c
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/ethernet/sfc/selftest.c
index 822f6c2a6a7c..822f6c2a6a7c 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/ethernet/sfc/selftest.c
diff --git a/drivers/net/sfc/selftest.h b/drivers/net/ethernet/sfc/selftest.h
index dba5456e70f3..dba5456e70f3 100644
--- a/drivers/net/sfc/selftest.h
+++ b/drivers/net/ethernet/sfc/selftest.h
diff --git a/drivers/net/sfc/siena.c b/drivers/net/ethernet/sfc/siena.c
index 5735e84c69de..5735e84c69de 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/ethernet/sfc/siena.c
diff --git a/drivers/net/sfc/spi.h b/drivers/net/ethernet/sfc/spi.h
index 71f2e3ebe1c7..71f2e3ebe1c7 100644
--- a/drivers/net/sfc/spi.h
+++ b/drivers/net/ethernet/sfc/spi.h
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/ethernet/sfc/tenxpress.c
index 7b0fd89e7b85..7b0fd89e7b85 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/ethernet/sfc/tenxpress.c
diff --git a/drivers/net/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c
index 84eb99e0f8d2..84eb99e0f8d2 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/ethernet/sfc/tx.c
diff --git a/drivers/net/sfc/txc43128_phy.c b/drivers/net/ethernet/sfc/txc43128_phy.c
index 7c21b334a75b..7c21b334a75b 100644
--- a/drivers/net/sfc/txc43128_phy.c
+++ b/drivers/net/ethernet/sfc/txc43128_phy.c
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/ethernet/sfc/workarounds.h
index 99ff11400cef..99ff11400cef 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/ethernet/sfc/workarounds.h
diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig
new file mode 100644
index 000000000000..e832f46660c9
--- /dev/null
+++ b/drivers/net/ethernet/sgi/Kconfig
@@ -0,0 +1,35 @@
+#
+# SGI device configuration
+#
+
+config NET_VENDOR_SGI
+	bool "SGI devices"
+	default y
+	depends on (PCI && SGI_IP27) || SGI_IP32
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about SGI devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_SGI
+
+config SGI_IOC3_ETH
+	bool "SGI IOC3 Ethernet"
+	depends on PCI && SGI_IP27
+	select CRC32
+	select MII
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config SGI_O2MACE_ETH
+	tristate "SGI O2 MACE Fast Ethernet support"
+	depends on SGI_IP32=y
+
+endif # NET_VENDOR_SGI
diff --git a/drivers/net/ethernet/sgi/Makefile b/drivers/net/ethernet/sgi/Makefile
new file mode 100644
index 000000000000..e5bedd271e29
--- /dev/null
+++ b/drivers/net/ethernet/sgi/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the SGI device drivers.
+#
+
+obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
+obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index a234e4504522..ac149d99f78f 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1220,7 +1220,7 @@ static const struct net_device_ops ioc3_netdev_ops = {
 	.ndo_start_xmit		= ioc3_start_xmit,
 	.ndo_tx_timeout		= ioc3_timeout,
 	.ndo_get_stats		= ioc3_get_stats,
-	.ndo_set_multicast_list	= ioc3_set_multicast_list,
+	.ndo_set_rx_mode	= ioc3_set_multicast_list,
 	.ndo_do_ioctl		= ioc3_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ioc3_set_mac_address,
diff --git a/drivers/net/meth.c b/drivers/net/ethernet/sgi/meth.c
index 60135aa55802..60135aa55802 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/ethernet/sgi/meth.c
diff --git a/drivers/net/meth.h b/drivers/net/ethernet/sgi/meth.h
index 5b145c6bad60..5b145c6bad60 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/ethernet/sgi/meth.h
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
new file mode 100644
index 000000000000..68d052b09af1
--- /dev/null
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -0,0 +1,51 @@
+#
+# Silicon Integrated Systems (SiS) device configuration
+#
+
+config NET_VENDOR_SIS
+	bool "Silicon Integrated Systems (SiS) devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about SiS devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_SIS
+
+config SIS900
+	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
+	  SiS 630 and SiS 540 chipsets.
+
+	  This driver also supports AMD 79C901 HomePNA so that you can use
+	  your phone line as a network cable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis900.  This is recommended.
+
+config SIS190
+	tristate "SiS190/SiS191 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+	  appear in lan on motherboard designs which are based on SiS 965
+	  and SiS 966 south bridge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis190.  This is recommended.
+
+endif # NET_VENDOR_SIS
diff --git a/drivers/net/ethernet/sis/Makefile b/drivers/net/ethernet/sis/Makefile
new file mode 100644
index 000000000000..58d3ac1985df
--- /dev/null
+++ b/drivers/net/ethernet/sis/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Silicon Integrated Systems (SiS) network device drivers.
+#
+
+obj-$(CONFIG_SIS190) += sis190.o
+obj-$(CONFIG_SIS900) += sis900.o
diff --git a/drivers/net/sis190.c b/drivers/net/ethernet/sis/sis190.c
index 8ad7bfbaa3af..1b4658c99391 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/ethernet/sis/sis190.c
@@ -1825,15 +1825,25 @@ static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL);
 }
 
+static int sis190_mac_addr(struct net_device  *dev, void *p)
+{
+	int rc;
+
+	rc = eth_mac_addr(dev, p);
+	if (!rc)
+		sis190_init_rxfilter(dev);
+	return rc;
+}
+
 static const struct net_device_ops sis190_netdev_ops = {
 	.ndo_open		= sis190_open,
 	.ndo_stop		= sis190_close,
 	.ndo_do_ioctl		= sis190_ioctl,
 	.ndo_start_xmit		= sis190_start_xmit,
 	.ndo_tx_timeout		= sis190_tx_timeout,
-	.ndo_set_multicast_list = sis190_set_rx_mode,
+	.ndo_set_rx_mode	= sis190_set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address	= sis190_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	 = sis190_netpoll,
diff --git a/drivers/net/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 658a1928fe79..a184abc5ef11 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -403,7 +403,7 @@ static const struct net_device_ops sis900_netdev_ops = {
 	.ndo_stop		= sis900_close,
 	.ndo_start_xmit		= sis900_start_xmit,
 	.ndo_set_config		= sis900_set_config,
-	.ndo_set_multicast_list	= set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/sis900.h b/drivers/net/ethernet/sis/sis900.h
index 150511a922ef..150511a922ef 100644
--- a/drivers/net/sis900.h
+++ b/drivers/net/ethernet/sis/sis900.h
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
new file mode 100644
index 000000000000..f9619285b5ef
--- /dev/null
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -0,0 +1,132 @@
+#
+# Western Digital/SMC network device configuration
+#
+
+config NET_VENDOR_SMSC
+	bool "SMC (SMSC)/Western Digital devices"
+	default y
+	depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \
+		BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about SMC/Western Digital cards. If you say Y, you will
+	  be asked for your specific card in the following questions.
+
+if NET_VENDOR_SMSC
+
+config SMC9194
+	tristate "SMC 9194 support"
+	depends on (ISA || MAC && BROKEN)
+	select CRC32
+	---help---
+	  This is support for the SMC9xxx based Ethernet cards. Choose this
+	  option if you have a DELL laptop with the docking station, or
+	  another SMC9192/9194 based chipset.  Say Y if you want it compiled
+	  into the kernel, and read the file
+	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc9194.
+
+config SMC91X
+	tristate "SMC 91C9x/91C1xxx support"
+	select CRC32
+	select MII
+	depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
+		    MN10300 || COLDFIRE)
+	---help---
+	  This is a driver for SMC's 91x series of Ethernet chipsets,
+	  including the SMC91C94 and the SMC91C111. Say Y if you want it
+	  compiled into the kernel, and read the file
+	  <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
+	  available from  <http://www.tldp.org/docs.html#howto>.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called smc91x.  If you want to compile it as a
+	  module, say M here and read <file:Documentation/kbuild/modules.txt>.
+
+config PCMCIA_SMC91C92
+	tristate "SMC 91Cxx PCMCIA support"
+	depends on PCMCIA
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
+	  (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called smc91c92_cs.  If unsure, say N.
+
+config EPIC100
+	tristate "SMC EtherPower II"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
+	  which is based on the SMC83c17x (EPIC/100).
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/epic100.html>.
+
+config SMC911X
+	tristate "SMSC LAN911[5678] support"
+	select CRC32
+	select MII
+	depends on (ARM || SUPERH || MN10300)
+	---help---
+	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
+	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+	  Say Y if you want it compiled into the kernel,
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  This driver is also available as a module. The module will be
+	  called smc911x.  If you want to compile it as a module, say M
+	  here and read <file:Documentation/kbuild/modules.txt>
+
+config SMSC911X
+	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
+	depends on (ARM || SUPERH || BLACKFIN || MIPS || MN10300)
+	select CRC32
+	select MII
+	select PHYLIB
+	---help---
+	  Say Y here if you want support for SMSC LAN911x and LAN921x families
+	  of ethernet controllers.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called smsc911x.
+
+config SMSC911X_ARCH_HOOKS
+	def_bool n
+	depends on SMSC911X
+	---help---
+	  If the arch enables this, it allows the arch to implement various
+	  hooks for more comprehensive interrupt control and also to override
+	  the source of the MAC address.
+
+config SMSC9420
+	tristate "SMSC LAN9420 PCI ethernet adapter support"
+	depends on PCI
+	select CRC32
+	select PHYLIB
+	select SMSC_PHY
+	---help---
+	  This is a driver for SMSC's LAN9420 PCI ethernet adapter.
+	  Say Y if you want it compiled into the kernel,
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  This driver is also available as a module. The module will be
+	  called smsc9420.  If you want to compile it as a module, say M
+	  here and read <file:Documentation/kbuild/modules.txt>
+
+endif # NET_VENDOR_SMSC
diff --git a/drivers/net/ethernet/smsc/Makefile b/drivers/net/ethernet/smsc/Makefile
new file mode 100644
index 000000000000..f3438dec9d90
--- /dev/null
+++ b/drivers/net/ethernet/smsc/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the SMSC network device drivers.
+#
+
+obj-$(CONFIG_SMC9194) += smc9194.o
+obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
+obj-$(CONFIG_EPIC100) += epic100.o
+obj-$(CONFIG_SMSC9420) += smsc9420.o
+obj-$(CONFIG_SMC911X) += smc911x.o
+obj-$(CONFIG_SMSC911X) += smsc911x.o
diff --git a/drivers/net/epic100.c b/drivers/net/ethernet/smsc/epic100.c
index 814c187d5f95..0a5dfb814157 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/ethernet/smsc/epic100.c
@@ -314,7 +314,7 @@ static const struct net_device_ops epic_netdev_ops = {
 	.ndo_start_xmit		= epic_start_xmit,
 	.ndo_tx_timeout 	= epic_tx_timeout,
 	.ndo_get_stats		= epic_get_stats,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_do_ioctl 		= netdev_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index a91fe1723020..8f61fe9db1d0 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -1768,7 +1768,7 @@ static const struct net_device_ops smc911x_netdev_ops = {
 	.ndo_stop		= smc911x_close,
 	.ndo_start_xmit		= smc911x_hard_start_xmit,
 	.ndo_tx_timeout		= smc911x_timeout,
-	.ndo_set_multicast_list	= smc911x_set_multicast_list,
+	.ndo_set_rx_mode	= smc911x_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
index 3269292efecc..3269292efecc 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/ethernet/smsc/smc911x.h
diff --git a/drivers/net/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index 5b65ac4b3cef..4e45094efb18 100644
--- a/drivers/net/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -827,7 +827,7 @@ static const struct net_device_ops smc_netdev_ops = {
 	.ndo_stop		= smc_close,
 	.ndo_start_xmit    	= smc_wait_to_send_packet,
 	.ndo_tx_timeout	    	= smc_timeout,
-	.ndo_set_multicast_list	= smc_set_multicast_list,
+	.ndo_set_rx_mode	= smc_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/smc9194.h b/drivers/net/ethernet/smsc/smc9194.h
index cf69d0a5a1cb..cf69d0a5a1cb 100644
--- a/drivers/net/smc9194.h
+++ b/drivers/net/ethernet/smsc/smc9194.h
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c
index 1cd9394c3359..cbfa98187131 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/ethernet/smsc/smc91c92_cs.c
@@ -294,7 +294,7 @@ static const struct net_device_ops smc_netdev_ops = {
 	.ndo_start_xmit		= smc_start_xmit,
 	.ndo_tx_timeout 	= smc_tx_timeout,
 	.ndo_set_config 	= s9k_config,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_rx_mode	= set_rx_mode,
 	.ndo_do_ioctl		= smc_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
@@ -809,7 +809,7 @@ static int smc91c92_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     struct smc_private *smc = netdev_priv(dev);
     char *name;
-    int i, j, rev;
+    int i, rev, j = 0;
     unsigned int ioaddr;
     u_long mir;
 
diff --git a/drivers/net/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 2b1d254d59af..f47f81e25322 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -1768,7 +1768,7 @@ static const struct net_device_ops smc_netdev_ops = {
 	.ndo_stop		= smc_close,
 	.ndo_start_xmit		= smc_hard_start_xmit,
 	.ndo_tx_timeout		= smc_timeout,
-	.ndo_set_multicast_list	= smc_set_multicast_list,
+	.ndo_set_rx_mode	= smc_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index 5f53fbbf67be..5f53fbbf67be 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
diff --git a/drivers/net/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index b9016a30cdc5..788c4fdab9c2 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -53,6 +53,10 @@
 #include <linux/phy.h>
 #include <linux/smsc911x.h>
 #include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_net.h>
 #include "smsc911x.h"
 
 #define SMSC_CHIPNAME		"smsc911x"
@@ -1902,7 +1906,7 @@ static const struct net_device_ops smsc911x_netdev_ops = {
 	.ndo_stop		= smsc911x_stop,
 	.ndo_start_xmit		= smsc911x_hard_start_xmit,
 	.ndo_get_stats		= smsc911x_get_stats,
-	.ndo_set_multicast_list	= smsc911x_set_multicast_list,
+	.ndo_set_rx_mode	= smsc911x_set_multicast_list,
 	.ndo_do_ioctl		= smsc911x_do_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -2095,8 +2099,58 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
 	.tx_writefifo = smsc911x_tx_writefifo_shift,
 };
 
+#ifdef CONFIG_OF
+static int __devinit smsc911x_probe_config_dt(
+				struct smsc911x_platform_config *config,
+				struct device_node *np)
+{
+	const char *mac;
+	u32 width = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	config->phy_interface = of_get_phy_mode(np);
+
+	mac = of_get_mac_address(np);
+	if (mac)
+		memcpy(config->mac, mac, ETH_ALEN);
+
+	of_property_read_u32(np, "reg-shift", &config->shift);
+
+	of_property_read_u32(np, "reg-io-width", &width);
+	if (width == 4)
+		config->flags |= SMSC911X_USE_32BIT;
+
+	if (of_get_property(np, "smsc,irq-active-high", NULL))
+		config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
+
+	if (of_get_property(np, "smsc,irq-push-pull", NULL))
+		config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
+
+	if (of_get_property(np, "smsc,force-internal-phy", NULL))
+		config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
+
+	if (of_get_property(np, "smsc,force-external-phy", NULL))
+		config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
+
+	if (of_get_property(np, "smsc,save-mac-address", NULL))
+		config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
+
+	return 0;
+}
+#else
+static inline int smsc911x_probe_config_dt(
+				struct smsc911x_platform_config *config,
+				struct device_node *np)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
 static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct net_device *dev;
 	struct smsc911x_data *pdata;
 	struct smsc911x_platform_config *config = pdev->dev.platform_data;
@@ -2107,13 +2161,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 
 	pr_info("Driver version %s\n", SMSC_DRV_VERSION);
 
-	/* platform data specifies irq & dynamic bus configuration */
-	if (!pdev->dev.platform_data) {
-		pr_warn("platform_data not provided\n");
-		retval = -ENODEV;
-		goto out_0;
-	}
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "smsc911x-memory");
 	if (!res)
@@ -2152,9 +2199,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
 	pdata->ioaddr = ioremap_nocache(res->start, res_size);
 
-	/* copy config parameters across to pdata */
-	memcpy(&pdata->config, config, sizeof(pdata->config));
-
 	pdata->dev = dev;
 	pdata->msg_enable = ((1 << debug) - 1);
 
@@ -2164,10 +2208,22 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 		goto out_free_netdev_2;
 	}
 
+	retval = smsc911x_probe_config_dt(&pdata->config, np);
+	if (retval && config) {
+		/* copy config parameters across to pdata */
+		memcpy(&pdata->config, config, sizeof(pdata->config));
+		retval = 0;
+	}
+
+	if (retval) {
+		SMSC_WARN(pdata, probe, "Error smsc911x config not found");
+		goto out_unmap_io_3;
+	}
+
 	/* assume standard, non-shifted, access to HW registers */
 	pdata->ops = &standard_smsc911x_ops;
 	/* apply the right access if shifting is needed */
-	if (config->shift)
+	if (pdata->config.shift)
 		pdata->ops = &shifted_smsc911x_ops;
 
 	retval = smsc911x_init(dev);
@@ -2314,6 +2370,12 @@ static const struct dev_pm_ops smsc911x_pm_ops = {
 #define SMSC911X_PM_OPS NULL
 #endif
 
+static const struct of_device_id smsc911x_dt_ids[] = {
+	{ .compatible = "smsc,lan9115", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
+
 static struct platform_driver smsc911x_driver = {
 	.probe = smsc911x_drv_probe,
 	.remove = __devexit_p(smsc911x_drv_remove),
@@ -2321,6 +2383,7 @@ static struct platform_driver smsc911x_driver = {
 		.name	= SMSC_CHIPNAME,
 		.owner	= THIS_MODULE,
 		.pm	= SMSC911X_PM_OPS,
+		.of_match_table = smsc911x_dt_ids,
 	},
 };
 
diff --git a/drivers/net/smsc911x.h b/drivers/net/ethernet/smsc/smsc911x.h
index 8d67aacf8867..8d67aacf8867 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/ethernet/smsc/smsc911x.h
diff --git a/drivers/net/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
index 459726f54754..4f15680849ff 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/ethernet/smsc/smsc9420.c
@@ -1566,7 +1566,7 @@ static const struct net_device_ops smsc9420_netdev_ops = {
 	.ndo_stop		= smsc9420_stop,
 	.ndo_start_xmit		= smsc9420_hard_start_xmit,
 	.ndo_get_stats		= smsc9420_get_stats,
-	.ndo_set_multicast_list	= smsc9420_set_multicast_list,
+	.ndo_set_rx_mode	= smsc9420_set_multicast_list,
 	.ndo_do_ioctl		= smsc9420_do_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/smsc9420.h b/drivers/net/ethernet/smsc/smsc9420.h
index e441402f77a2..e441402f77a2 100644
--- a/drivers/net/smsc9420.h
+++ b/drivers/net/ethernet/smsc/smsc9420.h
diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig
new file mode 100644
index 000000000000..f4a80da00650
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/Kconfig
@@ -0,0 +1,23 @@
+#
+# STMicroelectronics device configuration
+#
+
+config NET_VENDOR_STMICRO
+	bool "STMicroelectronics devices"
+	default y
+	depends on HAS_IOMEM
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about STMicroelectronics cards. If you say Y, you will
+	  be asked for your specific card in the following questions.
+
+if NET_VENDOR_STMICRO
+
+source "drivers/net/ethernet/stmicro/stmmac/Kconfig"
+
+endif # NET_VENDOR_STMICRO
diff --git a/drivers/net/ethernet/stmicro/Makefile b/drivers/net/ethernet/stmicro/Makefile
new file mode 100644
index 000000000000..9b3bfddda7dd
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the STMicroelectronics device drivers.
+#
+
+obj-$(CONFIG_STMMAC_ETH) += stmmac/
diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 7df7df4e79c5..cda61e37c357 100644
--- a/drivers/net/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -1,10 +1,10 @@
 config STMMAC_ETH
 	tristate "STMicroelectronics 10/100/1000 Ethernet driver"
+	depends on HAS_IOMEM
 	select MII
 	select PHYLIB
 	select CRC32
-	depends on NETDEVICES && HAS_IOMEM
-	help
+	---help---
 	  This is the driver for the Ethernet IPs are built around a
 	  Synopsys IP Core and only tested on the STMicroelectronics
 	  platforms.
@@ -14,7 +14,7 @@ if STMMAC_ETH
 config STMMAC_DA
 	bool "STMMAC DMA arbitration scheme"
 	default n
-	help
+	---help---
 	  Selecting this option, rx has priority over Tx (only for Giga
 	  Ethernet device).
 	  By default, the DMA arbitration scheme is based on Round-robin
@@ -24,7 +24,7 @@ config STMMAC_DUAL_MAC
 	bool "STMMAC: dual mac support (EXPERIMENTAL)"
 	default n
         depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
-	help
+	---help---
 	  Some ST SoCs (for example the stx7141 and stx7200c2) have two
 	  Ethernet Controllers. This option turns on the second Ethernet
 	  device on this kind of platforms.
@@ -33,7 +33,7 @@ config STMMAC_TIMER
 	bool "STMMAC Timer optimisation"
 	default n
 	depends on RTC_HCTOSYS_DEVICE
-	help
+	---help---
 	  Use an external timer for mitigating the number of network
 	  interrupts. Currently, for SH architectures, it is possible
 	  to use the TMU channel 2 and the SH-RTC device.
@@ -45,12 +45,12 @@ choice
 config STMMAC_TMU_TIMER
         bool "TMU channel 2"
         depends on CPU_SH4
-	help
+	---help---
 
 config STMMAC_RTC_TIMER
         bool "Real time clock"
         depends on RTC_CLASS
-	help
+	---help---
 
 endchoice
 
diff --git a/drivers/net/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 9691733ddb8e..9691733ddb8e 100644
--- a/drivers/net/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
diff --git a/drivers/net/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 375ea193e139..375ea193e139 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
diff --git a/drivers/net/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h
index 63a03e264694..63a03e264694 100644
--- a/drivers/net/stmmac/descs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs.h
diff --git a/drivers/net/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
index 7c6d857a9cc7..7c6d857a9cc7 100644
--- a/drivers/net/stmmac/dwmac100.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
diff --git a/drivers/net/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index cfcef0ea0fa5..cfcef0ea0fa5 100644
--- a/drivers/net/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 0f63b3c83c19..0f63b3c83c19 100644
--- a/drivers/net/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
diff --git a/drivers/net/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 3dbeea619085..3dbeea619085 100644
--- a/drivers/net/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
diff --git a/drivers/net/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 743a58017637..743a58017637 100644
--- a/drivers/net/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
diff --git a/drivers/net/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index 627f656b0f3c..627f656b0f3c 100644
--- a/drivers/net/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
diff --git a/drivers/net/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index da3f5ccf83d3..da3f5ccf83d3 100644
--- a/drivers/net/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
diff --git a/drivers/net/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
index e25093510b0c..e25093510b0c 100644
--- a/drivers/net/stmmac/dwmac_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
diff --git a/drivers/net/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index e5dfb6a30182..e5dfb6a30182 100644
--- a/drivers/net/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
diff --git a/drivers/net/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index 029c2a2cf524..029c2a2cf524 100644
--- a/drivers/net/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index de1929b2641b..de1929b2641b 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 7ed8fb6c2117..7ed8fb6c2117 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c6e567e04eff..68fb5b0593a0 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -42,6 +42,7 @@
 #include <linux/crc32.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
+#include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
@@ -1284,7 +1285,7 @@ static int stmmac_config(struct net_device *dev, struct ifmap *map)
 }
 
 /**
- *  stmmac_multicast_list - entry point for multicast addressing
+ *  stmmac_set_rx_mode - entry point for multicast addressing
  *  @dev : pointer to the device structure
  *  Description:
  *  This function is a driver entry point which gets called by the kernel
@@ -1292,7 +1293,7 @@ static int stmmac_config(struct net_device *dev, struct ifmap *map)
  *  Return value:
  *  void.
  */
-static void stmmac_multicast_list(struct net_device *dev)
+static void stmmac_set_rx_mode(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 
@@ -1421,7 +1422,7 @@ static const struct net_device_ops stmmac_netdev_ops = {
 	.ndo_stop = stmmac_release,
 	.ndo_change_mtu = stmmac_change_mtu,
 	.ndo_fix_features = stmmac_fix_features,
-	.ndo_set_multicast_list = stmmac_multicast_list,
+	.ndo_set_rx_mode = stmmac_set_rx_mode,
 	.ndo_tx_timeout = stmmac_tx_timeout,
 	.ndo_do_ioctl = stmmac_ioctl,
 	.ndo_set_config = stmmac_config,
@@ -1498,10 +1499,12 @@ static int stmmac_mac_device_setup(struct net_device *dev)
 
 	struct mac_device_info *device;
 
-	if (priv->plat->has_gmac)
+	if (priv->plat->has_gmac) {
+		dev->priv_flags |= IFF_UNICAST_FLT;
 		device = dwmac1000_setup(priv->ioaddr);
-	else
+	} else {
 		device = dwmac100_setup(priv->ioaddr);
+	}
 
 	if (!device)
 		return -ENOMEM;
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 9c3b9d5c3411..9c3b9d5c3411 100644
--- a/drivers/net/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
index 2a0e1abde7e7..2a0e1abde7e7 100644
--- a/drivers/net/stmmac/stmmac_timer.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
index 6863590d184b..6863590d184b 100644
--- a/drivers/net/stmmac/stmmac_timer.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig
new file mode 100644
index 000000000000..57bfd8599679
--- /dev/null
+++ b/drivers/net/ethernet/sun/Kconfig
@@ -0,0 +1,88 @@
+#
+# Sun network device configuration
+#
+
+config NET_VENDOR_SUN
+	bool "Sun devices"
+	default y
+	depends on SUN3 || SBUS || PCI || SUN_LDOMS
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say
+	  Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Sun network interfaces. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_VENDOR_SUN
+
+config HAPPYMEAL
+	tristate "Sun Happy Meal 10/100baseT support"
+	depends on (SBUS || PCI)
+	select CRC32
+	---help---
+	  This driver supports the "hme" interface present on most Ultra
+	  systems and as an option on older Sbus systems. This driver supports
+	  both PCI and Sbus devices. This driver also supports the "qfe" quad
+	  100baseT device available in both PCI and Sbus configurations.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunhme.
+
+config SUNBMAC
+	tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
+	depends on SBUS && EXPERIMENTAL
+	select CRC32
+	---help---
+	  This driver supports the "be" interface available as an Sbus option.
+	  This is Sun's older 100baseT Ethernet device.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunbmac.
+
+config SUNQE
+	tristate "Sun QuadEthernet support"
+	depends on SBUS
+	select CRC32
+	---help---
+	  This driver supports the "qe" 10baseT Ethernet device, available as
+	  an Sbus option. Note that this is not the same as Quad FastEthernet
+	  "qfe" which is supported by the Happy Meal driver instead.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunqe.
+
+config SUNGEM
+	tristate "Sun GEM support"
+	depends on PCI
+	select CRC32
+	select SUNGEM_PHY
+	---help---
+	  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
+	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
+
+config CASSINI
+	tristate "Sun Cassini support"
+	depends on PCI
+	select CRC32
+	---help---
+	  Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
+	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
+
+config SUNVNET
+	tristate "Sun Virtual Network support"
+	depends on SUN_LDOMS
+	---help---
+	  Support for virtual network devices under Sun Logical Domains.
+
+config NIU
+	tristate "Sun Neptune 10Gbit Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This enables support for cards based upon Sun's
+	  Neptune chipset.
+
+endif # NET_VENDOR_SUN
diff --git a/drivers/net/ethernet/sun/Makefile b/drivers/net/ethernet/sun/Makefile
new file mode 100644
index 000000000000..1e620ff88eba
--- /dev/null
+++ b/drivers/net/ethernet/sun/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Sun network device drivers.
+#
+
+obj-$(CONFIG_HAPPYMEAL) += sunhme.o
+obj-$(CONFIG_SUNQE) += sunqe.o
+obj-$(CONFIG_SUNBMAC) += sunbmac.o
+obj-$(CONFIG_SUNGEM) += sungem.o
+obj-$(CONFIG_CASSINI) += cassini.o
+obj-$(CONFIG_SUNVNET) += sunvnet.o
+obj-$(CONFIG_NIU) += niu.o
diff --git a/drivers/net/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 646c86bcc545..1776a37b7aed 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -4910,7 +4910,7 @@ static const struct net_device_ops cas_netdev_ops = {
 	.ndo_stop		= cas_close,
 	.ndo_start_xmit		= cas_start_xmit,
 	.ndo_get_stats 		= cas_get_stats,
-	.ndo_set_multicast_list = cas_set_multicast,
+	.ndo_set_rx_mode	= cas_set_multicast,
 	.ndo_do_ioctl		= cas_ioctl,
 	.ndo_tx_timeout		= cas_tx_timeout,
 	.ndo_change_mtu		= cas_change_mtu,
diff --git a/drivers/net/cassini.h b/drivers/net/ethernet/sun/cassini.h
index b361424d5f57..b361424d5f57 100644
--- a/drivers/net/cassini.h
+++ b/drivers/net/ethernet/sun/cassini.h
diff --git a/drivers/net/niu.c b/drivers/net/ethernet/sun/niu.c
index cd6c2317e29e..3c9ef1c196a9 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/mii.h>
+#include <linux/if.h>
 #include <linux/if_ether.h>
 #include <linux/if_vlan.h>
 #include <linux/ip.h>
@@ -9201,7 +9202,7 @@ static int __devinit niu_ldg_init(struct niu *np)
 
 	first_chan = 0;
 	for (i = 0; i < port; i++)
-		first_chan += parent->rxchan_per_port[port];
+		first_chan += parent->rxchan_per_port[i];
 	num_chan = parent->rxchan_per_port[port];
 
 	for (i = first_chan; i < (first_chan + num_chan); i++) {
@@ -9217,7 +9218,7 @@ static int __devinit niu_ldg_init(struct niu *np)
 
 	first_chan = 0;
 	for (i = 0; i < port; i++)
-		first_chan += parent->txchan_per_port[port];
+		first_chan += parent->txchan_per_port[i];
 	num_chan = parent->txchan_per_port[port];
 	for (i = first_chan; i < (first_chan + num_chan); i++) {
 		err = niu_ldg_assign_ldn(np, parent,
@@ -9716,7 +9717,7 @@ static const struct net_device_ops niu_netdev_ops = {
 	.ndo_stop		= niu_close,
 	.ndo_start_xmit		= niu_start_xmit,
 	.ndo_get_stats64	= niu_get_stats,
-	.ndo_set_multicast_list	= niu_set_rx_mode,
+	.ndo_set_rx_mode	= niu_set_rx_mode,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= niu_set_mac_addr,
 	.ndo_do_ioctl		= niu_ioctl,
@@ -9852,6 +9853,8 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev,
 
 	niu_set_basic_features(dev);
 
+	dev->priv_flags |= IFF_UNICAST_FLT;
+
 	np->regs = pci_ioremap_bar(pdev, 0);
 	if (!np->regs) {
 		dev_err(&pdev->dev, "Cannot map device registers, aborting\n");
diff --git a/drivers/net/niu.h b/drivers/net/ethernet/sun/niu.h
index 51e177e1860d..51e177e1860d 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/ethernet/sun/niu.h
diff --git a/drivers/net/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c
index 297a4242106b..0d8cfd9ea053 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/ethernet/sun/sunbmac.c
@@ -17,6 +17,7 @@
 #include <linux/crc32.h>
 #include <linux/errno.h>
 #include <linux/ethtool.h>
+#include <linux/mii.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
@@ -500,13 +501,13 @@ static int try_next_permutation(struct bigmac *bp, void __iomem *tregs)
 
 		/* Reset the PHY. */
 		bp->sw_bmcr	= (BMCR_ISOLATE | BMCR_PDOWN | BMCR_LOOPBACK);
-		bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+		bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 		bp->sw_bmcr	= (BMCR_RESET);
-		bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+		bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 
 		timeout = 64;
 		while (--timeout) {
-			bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+			bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 			if ((bp->sw_bmcr & BMCR_RESET) == 0)
 				break;
 			udelay(20);
@@ -514,11 +515,11 @@ static int try_next_permutation(struct bigmac *bp, void __iomem *tregs)
 		if (timeout == 0)
 			printk(KERN_ERR "%s: PHY reset failed.\n", bp->dev->name);
 
-		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 
 		/* Now we try 10baseT. */
 		bp->sw_bmcr &= ~(BMCR_SPEED100);
-		bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+		bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 		return 0;
 	}
 
@@ -534,8 +535,8 @@ static void bigmac_timer(unsigned long data)
 
 	bp->timer_ticks++;
 	if (bp->timer_state == ltrywait) {
-		bp->sw_bmsr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMSR);
-		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+		bp->sw_bmsr = bigmac_tcvr_read(bp, tregs, MII_BMSR);
+		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 		if (bp->sw_bmsr & BMSR_LSTATUS) {
 			printk(KERN_INFO "%s: Link is now up at %s.\n",
 			       bp->dev->name,
@@ -588,18 +589,18 @@ static void bigmac_begin_auto_negotiation(struct bigmac *bp)
 	int timeout;
 
 	/* Grab new software copies of PHY registers. */
-	bp->sw_bmsr	= bigmac_tcvr_read(bp, tregs, BIGMAC_BMSR);
-	bp->sw_bmcr	= bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+	bp->sw_bmsr	= bigmac_tcvr_read(bp, tregs, MII_BMSR);
+	bp->sw_bmcr	= bigmac_tcvr_read(bp, tregs, MII_BMCR);
 
 	/* Reset the PHY. */
 	bp->sw_bmcr	= (BMCR_ISOLATE | BMCR_PDOWN | BMCR_LOOPBACK);
-	bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+	bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 	bp->sw_bmcr	= (BMCR_RESET);
-	bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+	bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 
 	timeout = 64;
 	while (--timeout) {
-		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 		if ((bp->sw_bmcr & BMCR_RESET) == 0)
 			break;
 		udelay(20);
@@ -607,11 +608,11 @@ static void bigmac_begin_auto_negotiation(struct bigmac *bp)
 	if (timeout == 0)
 		printk(KERN_ERR "%s: PHY reset failed.\n", bp->dev->name);
 
-	bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+	bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 
 	/* First we try 100baseT. */
 	bp->sw_bmcr |= BMCR_SPEED100;
-	bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+	bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 
 	bp->timer_state = ltrywait;
 	bp->timer_ticks = 0;
@@ -1054,7 +1055,7 @@ static u32 bigmac_get_link(struct net_device *dev)
 	struct bigmac *bp = netdev_priv(dev);
 
 	spin_lock_irq(&bp->lock);
-	bp->sw_bmsr = bigmac_tcvr_read(bp, bp->tregs, BIGMAC_BMSR);
+	bp->sw_bmsr = bigmac_tcvr_read(bp, bp->tregs, MII_BMSR);
 	spin_unlock_irq(&bp->lock);
 
 	return (bp->sw_bmsr & BMSR_LSTATUS);
@@ -1070,7 +1071,7 @@ static const struct net_device_ops bigmac_ops = {
 	.ndo_stop		= bigmac_close,
 	.ndo_start_xmit		= bigmac_start_xmit,
 	.ndo_get_stats		= bigmac_get_stats,
-	.ndo_set_multicast_list	= bigmac_set_multicast,
+	.ndo_set_rx_mode	= bigmac_set_multicast,
 	.ndo_tx_timeout		= bigmac_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/sunbmac.h b/drivers/net/ethernet/sun/sunbmac.h
index 4943e975a731..06dd21707353 100644
--- a/drivers/net/sunbmac.h
+++ b/drivers/net/ethernet/sun/sunbmac.h
@@ -223,23 +223,6 @@
 #define BIGMAC_PHY_EXTERNAL   0 /* External transceiver */
 #define BIGMAC_PHY_INTERNAL   1 /* Internal transceiver */
 
-/* PHY registers */
-#define BIGMAC_BMCR           0x00 /* Basic mode control register	*/
-#define BIGMAC_BMSR           0x01 /* Basic mode status register	*/
-
-/* BMCR bits */
-#define BMCR_ISOLATE            0x0400  /* Disconnect DP83840 from MII */
-#define BMCR_PDOWN              0x0800  /* Powerdown the DP83840       */
-#define BMCR_ANENABLE           0x1000  /* Enable auto negotiation     */
-#define BMCR_SPEED100           0x2000  /* Select 100Mbps              */
-#define BMCR_LOOPBACK           0x4000  /* TXD loopback bits           */
-#define BMCR_RESET              0x8000  /* Reset the DP83840           */
-
-/* BMSR bits */
-#define BMSR_ERCAP              0x0001  /* Ext-reg capability          */
-#define BMSR_JCD                0x0002  /* Jabber detected             */
-#define BMSR_LSTATUS            0x0004  /* Link status                 */
-
 /* Ring descriptors and such, same as Quad Ethernet. */
 struct be_rxd {
 	u32 rx_flags;
diff --git a/drivers/net/sungem.c b/drivers/net/ethernet/sun/sungem.c
index be745ae8f4e3..11fd299f5b99 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/ethernet/sun/sungem.c
@@ -46,19 +46,20 @@
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
 #include <asm/irq.h>
-#include <asm/prom.h>
 
 #ifdef CONFIG_SPARC
 #include <asm/idprom.h>
+#include <asm/prom.h>
 #endif
 
 #ifdef CONFIG_PPC_PMAC
 #include <asm/pci-bridge.h>
+#include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/pmac_feature.h>
 #endif
 
-#include "sungem_phy.h"
+#include <linux/sungem_phy.h>
 #include "sungem.h"
 
 /* Stripping FCS is causing problems, disabled for now */
@@ -1720,7 +1721,7 @@ static void gem_init_phy(struct gem *gp)
 	if (gp->phy_type == phy_mii_mdio0 ||
 	    gp->phy_type == phy_mii_mdio1) {
 		/* Reset and detect MII PHY */
-		mii_phy_probe(&gp->phy_mii, gp->mii_phy_addr);
+		sungem_phy_probe(&gp->phy_mii, gp->mii_phy_addr);
 
 		/* Init PHY */
 		if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
@@ -2819,7 +2820,7 @@ static const struct net_device_ops gem_netdev_ops = {
 	.ndo_stop		= gem_close,
 	.ndo_start_xmit		= gem_start_xmit,
 	.ndo_get_stats		= gem_get_stats,
-	.ndo_set_multicast_list = gem_set_multicast,
+	.ndo_set_rx_mode	= gem_set_multicast,
 	.ndo_do_ioctl		= gem_ioctl,
 	.ndo_tx_timeout		= gem_tx_timeout,
 	.ndo_change_mtu		= gem_change_mtu,
diff --git a/drivers/net/sungem.h b/drivers/net/ethernet/sun/sungem.h
index 835ce1b3cb9f..835ce1b3cb9f 100644
--- a/drivers/net/sungem.h
+++ b/drivers/net/ethernet/sun/sungem.h
diff --git a/drivers/net/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index 856e05b9fba3..42f866ef81e1 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -2619,7 +2619,7 @@ static const struct net_device_ops hme_netdev_ops = {
 	.ndo_start_xmit		= happy_meal_start_xmit,
 	.ndo_tx_timeout		= happy_meal_tx_timeout,
 	.ndo_get_stats		= happy_meal_get_stats,
-	.ndo_set_multicast_list = happy_meal_set_multicast,
+	.ndo_set_rx_mode	= happy_meal_set_multicast,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/sunhme.h b/drivers/net/ethernet/sun/sunhme.h
index 64f278360d89..64f278360d89 100644
--- a/drivers/net/sunhme.h
+++ b/drivers/net/ethernet/sun/sunhme.h
diff --git a/drivers/net/sunqe.c b/drivers/net/ethernet/sun/sunqe.c
index 209c7f8df003..b28f74367ebe 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/ethernet/sun/sunqe.c
@@ -824,7 +824,7 @@ static const struct net_device_ops qec_ops = {
 	.ndo_open		= qe_open,
 	.ndo_stop		= qe_close,
 	.ndo_start_xmit		= qe_start_xmit,
-	.ndo_set_multicast_list	= qe_set_multicast,
+	.ndo_set_rx_mode	= qe_set_multicast,
 	.ndo_tx_timeout		= qe_tx_timeout,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/sunqe.h b/drivers/net/ethernet/sun/sunqe.h
index 581781b6b2fa..581781b6b2fa 100644
--- a/drivers/net/sunqe.h
+++ b/drivers/net/ethernet/sun/sunqe.h
diff --git a/drivers/net/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c
index bf3c762de620..8c6c059f3489 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/ethernet/sun/sunvnet.c
@@ -1012,7 +1012,7 @@ static DEFINE_MUTEX(vnet_list_mutex);
 static const struct net_device_ops vnet_ops = {
 	.ndo_open		= vnet_open,
 	.ndo_stop		= vnet_close,
-	.ndo_set_multicast_list	= vnet_set_rx_mode,
+	.ndo_set_rx_mode	= vnet_set_rx_mode,
 	.ndo_set_mac_address	= vnet_set_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_tx_timeout		= vnet_tx_timeout,
diff --git a/drivers/net/sunvnet.h b/drivers/net/ethernet/sun/sunvnet.h
index d347a5bf24b0..d347a5bf24b0 100644
--- a/drivers/net/sunvnet.h
+++ b/drivers/net/ethernet/sun/sunvnet.h
diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig
new file mode 100644
index 000000000000..1fc027eda33e
--- /dev/null
+++ b/drivers/net/ethernet/tehuti/Kconfig
@@ -0,0 +1,27 @@
+#
+# Tehuti network device configuration
+#
+
+config NET_VENDOR_TEHUTI
+	bool "Tehuti devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Tehuti cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TEHUTI
+
+config TEHUTI
+	tristate "Tehuti Networks 10G Ethernet"
+	depends on PCI
+	---help---
+	  Tehuti Networks 10G Ethernet NIC
+
+endif # NET_VENDOR_TEHUTI
diff --git a/drivers/net/ethernet/tehuti/Makefile b/drivers/net/ethernet/tehuti/Makefile
new file mode 100644
index 000000000000..f995421ddbc8
--- /dev/null
+++ b/drivers/net/ethernet/tehuti/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Tehuti network device drivers.
+#
+
+obj-$(CONFIG_TEHUTI) += tehuti.o
diff --git a/drivers/net/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
index 749bbf18dc6a..bc65aa8de4d0 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/ethernet/tehuti/tehuti.c
@@ -1860,7 +1860,7 @@ static const struct net_device_ops bdx_netdev_ops = {
 	.ndo_start_xmit		= bdx_tx_transmit,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= bdx_ioctl,
-	.ndo_set_multicast_list = bdx_setmulti,
+	.ndo_set_rx_mode	= bdx_setmulti,
 	.ndo_change_mtu		= bdx_change_mtu,
 	.ndo_set_mac_address	= bdx_set_mac,
 	.ndo_vlan_rx_add_vid	= bdx_vlan_rx_add_vid,
diff --git a/drivers/net/tehuti.h b/drivers/net/ethernet/tehuti/tehuti.h
index 709ebd6e28b4..709ebd6e28b4 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/ethernet/tehuti/tehuti.h
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
new file mode 100644
index 000000000000..de76c70ec8fb
--- /dev/null
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -0,0 +1,77 @@
+#
+# TI device configuration
+#
+
+config NET_VENDOR_TI
+	bool "Texas Instruments (TI) devices"
+	default y
+	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about TI devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TI
+
+config TI_DAVINCI_EMAC
+	tristate "TI DaVinci EMAC Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	select TI_DAVINCI_MDIO
+	select TI_DAVINCI_CPDMA
+	select PHYLIB
+	---help---
+	  This driver supports TI's DaVinci Ethernet .
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_emac_driver.  This is recommended.
+
+config TI_DAVINCI_MDIO
+	tristate "TI DaVinci MDIO Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	select PHYLIB
+	---help---
+	  This driver supports TI's DaVinci MDIO module.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_mdio.  This is recommended.
+
+config TI_DAVINCI_CPDMA
+	tristate "TI DaVinci CPDMA Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	---help---
+	  This driver supports TI's DaVinci CPDMA dma engine.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_cpdma.  This is recommended.
+
+config TLAN
+	tristate "TI ThunderLAN support"
+	depends on (PCI || EISA)
+	---help---
+	  If you have a PCI Ethernet network card based on the ThunderLAN chip
+	  which is supported by this driver, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Devices currently supported by this driver are Compaq Netelligent,
+	  Compaq NetFlex and Olicom cards.  Please read the file
+	  <file:Documentation/networking/tlan.txt> for more details.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called tlan.
+
+	  Please email feedback to <torben.mathiasen@compaq.com>.
+
+config CPMAC
+	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && AR7
+	select PHYLIB
+	---help---
+	  TI AR7 CPMAC Ethernet support
+
+endif # NET_VENDOR_TI
diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
new file mode 100644
index 000000000000..aedb3af74e5a
--- /dev/null
+++ b/drivers/net/ethernet/ti/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the TI network device drivers.
+#
+
+obj-$(CONFIG_TLAN) += tlan.o
+obj-$(CONFIG_CPMAC) += cpmac.o
+obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
+obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
+obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
diff --git a/drivers/net/cpmac.c b/drivers/net/ethernet/ti/cpmac.c
index e0638cb4b07c..aaac0c7ad111 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/ethernet/ti/cpmac.c
@@ -1100,7 +1100,7 @@ static const struct net_device_ops cpmac_netdev_ops = {
 	.ndo_stop		= cpmac_stop,
 	.ndo_start_xmit		= cpmac_start_xmit,
 	.ndo_tx_timeout		= cpmac_tx_timeout,
-	.ndo_set_multicast_list	= cpmac_set_multicast_list,
+	.ndo_set_rx_mode	= cpmac_set_multicast_list,
 	.ndo_do_ioctl		= cpmac_ioctl,
 	.ndo_set_config		= cpmac_config,
 	.ndo_change_mtu		= eth_change_mtu,
diff --git a/drivers/net/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index dca9d3369cdd..dca9d3369cdd 100644
--- a/drivers/net/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
diff --git a/drivers/net/davinci_cpdma.h b/drivers/net/ethernet/ti/davinci_cpdma.h
index afa19a0c0d81..afa19a0c0d81 100644
--- a/drivers/net/davinci_cpdma.h
+++ b/drivers/net/ethernet/ti/davinci_cpdma.h
diff --git a/drivers/net/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 3f451e4d8361..815c7970261b 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1741,7 +1741,7 @@ static const struct net_device_ops emac_netdev_ops = {
 	.ndo_open		= emac_dev_open,
 	.ndo_stop		= emac_dev_stop,
 	.ndo_start_xmit		= emac_dev_xmit,
-	.ndo_set_multicast_list	= emac_dev_mcast_set,
+	.ndo_set_rx_mode	= emac_dev_mcast_set,
 	.ndo_set_mac_address	= emac_dev_setmac_addr,
 	.ndo_do_ioctl		= emac_devioctl,
 	.ndo_tx_timeout		= emac_dev_tx_timeout,
diff --git a/drivers/net/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index 7615040df756..7615040df756 100644
--- a/drivers/net/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
diff --git a/drivers/net/tlan.c b/drivers/net/ethernet/ti/tlan.c
index 145871b3130b..9c0dd6b8d6c9 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/ethernet/ti/tlan.c
@@ -774,7 +774,7 @@ static const struct net_device_ops tlan_netdev_ops = {
 	.ndo_start_xmit		= tlan_start_tx,
 	.ndo_tx_timeout		= tlan_tx_timeout,
 	.ndo_get_stats		= tlan_get_stats,
-	.ndo_set_multicast_list = tlan_set_multicast_list,
+	.ndo_set_rx_mode	= tlan_set_multicast_list,
 	.ndo_do_ioctl		= tlan_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
diff --git a/drivers/net/tlan.h b/drivers/net/ethernet/ti/tlan.h
index 5fc98a8e4889..5fc98a8e4889 100644
--- a/drivers/net/tlan.h
+++ b/drivers/net/ethernet/ti/tlan.h
diff --git a/drivers/net/ethernet/tile/Kconfig b/drivers/net/ethernet/tile/Kconfig
new file mode 100644
index 000000000000..2d9218f86bca
--- /dev/null
+++ b/drivers/net/ethernet/tile/Kconfig
@@ -0,0 +1,15 @@
+#
+# Tilera network device configuration
+#
+
+config TILE_NET
+	tristate "Tilera GBE/XGBE network driver support"
+	depends on TILE
+	default y
+	select CRC32
+	---help---
+	  This is a standard Linux network device driver for the
+	  on-chip Tilera Gigabit Ethernet and XAUI interfaces.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tile_net.
diff --git a/drivers/net/tile/Makefile b/drivers/net/ethernet/tile/Makefile
index f634f142cab4..f634f142cab4 100644
--- a/drivers/net/tile/Makefile
+++ b/drivers/net/ethernet/tile/Makefile
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c
index 1e2af96fc29c..1e2af96fc29c 100644
--- a/drivers/net/tile/tilepro.c
+++ b/drivers/net/ethernet/tile/tilepro.c
diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig
new file mode 100644
index 000000000000..051764704559
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/Kconfig
@@ -0,0 +1,57 @@
+#
+# Toshiba network device configuration
+#
+
+config NET_VENDOR_TOSHIBA
+	bool "Toshiba devices"
+	default y
+	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Toshiba cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_TOSHIBA
+
+config GELIC_NET
+	tristate "PS3 Gigabit Ethernet driver"
+	depends on PPC_PS3
+	select PS3_SYS_MANAGER
+	---help---
+	  This driver supports the network device on the PS3 game
+	  console.  This driver has built-in support for Ethernet.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ps3_gelic.
+
+config GELIC_WIRELESS
+	bool "PS3 Wireless support"
+	depends on GELIC_NET && WLAN
+	select WIRELESS_EXT
+	---help---
+	  This option adds the support for the wireless feature of PS3.
+	  If you have the wireless-less model of PS3 or have no plan to
+	  use wireless feature, disabling this option saves memory.  As
+	  the driver automatically distinguishes the models, you can
+	  safely enable this option even if you have a wireless-less model.
+
+config SPIDER_NET
+	tristate "Spider Gigabit Ethernet driver"
+	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
+	select FW_LOADER
+	select SUNGEM_PHY
+	---help---
+	  This driver supports the Gigabit Ethernet chips present on the
+	  Cell Processor-Based Blades from IBM.
+
+config TC35815
+	tristate "TOSHIBA TC35815 Ethernet support"
+	depends on PCI && MIPS
+	select PHYLIB
+
+endif # NET_VENDOR_TOSHIBA
diff --git a/drivers/net/ethernet/toshiba/Makefile b/drivers/net/ethernet/toshiba/Makefile
new file mode 100644
index 000000000000..a5069008435b
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the Toshiba network device drivers.
+#
+
+obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
+gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
+ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
+spidernet-y += spider_net.o spider_net_ethtool.o
+obj-$(CONFIG_SPIDER_NET) += spidernet.o
+obj-$(CONFIG_TC35815) += tc35815.o
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index d82a82d9870c..ddb33cfd3543 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -1452,7 +1452,7 @@ static const struct net_device_ops gelic_netdevice_ops = {
 	.ndo_open = gelic_net_open,
 	.ndo_stop = gelic_net_stop,
 	.ndo_start_xmit = gelic_net_xmit,
-	.ndo_set_multicast_list = gelic_net_set_multi,
+	.ndo_set_rx_mode = gelic_net_set_multi,
 	.ndo_change_mtu = gelic_net_change_mtu,
 	.ndo_tx_timeout = gelic_net_tx_timeout,
 	.ndo_set_mac_address = eth_mac_addr,
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index d3fadfbc3bcc..d3fadfbc3bcc 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
index 2e62938c0f82..fd4ed7f8cfa1 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
@@ -2568,7 +2568,7 @@ static const struct net_device_ops gelic_wl_netdevice_ops = {
 	.ndo_open = gelic_wl_open,
 	.ndo_stop = gelic_wl_stop,
 	.ndo_start_xmit = gelic_net_xmit,
-	.ndo_set_multicast_list = gelic_net_set_multi,
+	.ndo_set_rx_mode = gelic_net_set_multi,
 	.ndo_change_mtu = gelic_net_change_mtu,
 	.ndo_tx_timeout = gelic_net_tx_timeout,
 	.ndo_set_mac_address = eth_mac_addr,
diff --git a/drivers/net/ps3_gelic_wireless.h b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.h
index f7e51b7d7049..f7e51b7d7049 100644
--- a/drivers/net/ps3_gelic_wireless.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.h
diff --git a/drivers/net/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c
index 1ff3491c8240..6199f6b387b6 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/ethernet/toshiba/spider_net.c
@@ -196,7 +196,7 @@ spider_net_setup_aneg(struct spider_net_card *card)
 	if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF))
 		advertise |= SUPPORTED_1000baseT_Half;
 
-	mii_phy_probe(phy, phy->mii_id);
+	sungem_phy_probe(phy, phy->mii_id);
 	phy->def->ops->setup_aneg(phy, advertise);
 
 }
@@ -2120,7 +2120,7 @@ spider_net_setup_phy(struct spider_net_card *card)
 		unsigned short id;
 		id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
 		if (id != 0x0000 && id != 0xffff) {
-			if (!mii_phy_probe(phy, phy->mii_id)) {
+			if (!sungem_phy_probe(phy, phy->mii_id)) {
 				pr_info("Found %s.\n", phy->def->name);
 				break;
 			}
@@ -2259,7 +2259,7 @@ static const struct net_device_ops spider_net_ops = {
 	.ndo_open		= spider_net_open,
 	.ndo_stop		= spider_net_stop,
 	.ndo_start_xmit		= spider_net_xmit,
-	.ndo_set_multicast_list	= spider_net_set_multi,
+	.ndo_set_rx_mode	= spider_net_set_multi,
 	.ndo_set_mac_address	= spider_net_set_mac,
 	.ndo_change_mtu		= spider_net_change_mtu,
 	.ndo_do_ioctl		= spider_net_do_ioctl,
diff --git a/drivers/net/spider_net.h b/drivers/net/ethernet/toshiba/spider_net.h
index 020f64a8fcf7..4ba2135474d1 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/ethernet/toshiba/spider_net.h
@@ -27,7 +27,7 @@
 
 #define VERSION "2.0 B"
 
-#include "sungem_phy.h"
+#include <linux/sungem_phy.h>
 
 extern int spider_net_stop(struct net_device *netdev);
 extern int spider_net_open(struct net_device *netdev);
diff --git a/drivers/net/spider_net_ethtool.c b/drivers/net/ethernet/toshiba/spider_net_ethtool.c
index 9c288cd7d171..9c288cd7d171 100644
--- a/drivers/net/spider_net_ethtool.c
+++ b/drivers/net/ethernet/toshiba/spider_net_ethtool.c
diff --git a/drivers/net/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index 4a55a162dfe6..71b785cd7563 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -774,7 +774,7 @@ static const struct net_device_ops tc35815_netdev_ops = {
 	.ndo_stop		= tc35815_close,
 	.ndo_start_xmit		= tc35815_send_packet,
 	.ndo_get_stats		= tc35815_get_stats,
-	.ndo_set_multicast_list	= tc35815_set_multicast_list,
+	.ndo_set_rx_mode	= tc35815_set_multicast_list,
 	.ndo_tx_timeout		= tc35815_tx_timeout,
 	.ndo_do_ioctl		= tc35815_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ethernet/tundra/Kconfig b/drivers/net/ethernet/tundra/Kconfig
new file mode 100644
index 000000000000..cf7d69b62c42
--- /dev/null
+++ b/drivers/net/ethernet/tundra/Kconfig
@@ -0,0 +1,29 @@
+#
+# Tundra network device configuration
+#
+
+config NET_VENDOR_TUNDRA
+	bool "Tundra devices"
+	default y
+	depends on TSI108_BRIDGE
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Tundra cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TUNDRA
+
+config TSI108_ETH
+	tristate "Tundra TSI108 gigabit Ethernet support"
+	depends on TSI108_BRIDGE
+	---help---
+	  This driver supports Tundra TSI108 gigabit Ethernet ports.
+	  To compile this driver as a module, choose M here: the module
+	  will be called tsi108_eth.
+
+endif # NET_VENDOR_TUNDRA
diff --git a/drivers/net/ethernet/tundra/Makefile b/drivers/net/ethernet/tundra/Makefile
new file mode 100644
index 000000000000..439f6930235b
--- /dev/null
+++ b/drivers/net/ethernet/tundra/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Tundra network device drivers.
+#
+
+obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c
index 64cb9ac19ed9..480a4ba53172 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/ethernet/tundra/tsi108_eth.c
@@ -1554,7 +1554,7 @@ static const struct net_device_ops tsi108_netdev_ops = {
 	.ndo_open		= tsi108_open,
 	.ndo_stop		= tsi108_close,
 	.ndo_start_xmit		= tsi108_send_packet,
-	.ndo_set_multicast_list	= tsi108_set_rx_mode,
+	.ndo_set_rx_mode	= tsi108_set_rx_mode,
 	.ndo_get_stats		= tsi108_get_stats,
 	.ndo_do_ioctl		= tsi108_do_ioctl,
 	.ndo_set_mac_address	= tsi108_set_mac,
diff --git a/drivers/net/tsi108_eth.h b/drivers/net/ethernet/tundra/tsi108_eth.h
index 5fee7d78dc6d..5fee7d78dc6d 100644
--- a/drivers/net/tsi108_eth.h
+++ b/drivers/net/ethernet/tundra/tsi108_eth.h
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
new file mode 100644
index 000000000000..e5d82a53ea57
--- /dev/null
+++ b/drivers/net/ethernet/via/Kconfig
@@ -0,0 +1,57 @@
+#
+# VIA device configuration
+#
+
+config NET_VENDOR_VIA
+	bool "VIA devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about VIA devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_VIA
+
+config VIA_RHINE
+	tristate "VIA Rhine support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+	  Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+	  Ethernet functions can also be found integrated on South Bridges
+	  (e.g. VT8235).
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-rhine.
+
+config VIA_RHINE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on VIA_RHINE
+	---help---
+	  This instructs the driver to use PCI shared memory (MMIO) instead of
+	  programmed I/O ports (PIO). Enabling this gives an improvement in
+	  processing time in parts of the driver.
+
+	  If unsure, say Y.
+
+config VIA_VELOCITY
+	tristate "VIA Velocity support"
+	depends on PCI
+	select CRC32
+	select CRC_CCITT
+	select MII
+	---help---
+	  If you have a VIA "Velocity" based network card say Y here.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-velocity.
+
+endif # NET_VENDOR_VIA
diff --git a/drivers/net/ethernet/via/Makefile b/drivers/net/ethernet/via/Makefile
new file mode 100644
index 000000000000..46c5d4a3d8f1
--- /dev/null
+++ b/drivers/net/ethernet/via/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the VIA device drivers.
+#
+
+obj-$(CONFIG_VIA_RHINE) += via-rhine.o
+obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
diff --git a/drivers/net/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 7f23ab913fd9..f34dd99fe579 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -697,7 +697,7 @@ static const struct net_device_ops rhine_netdev_ops = {
 	.ndo_stop		 = rhine_close,
 	.ndo_start_xmit		 = rhine_start_tx,
 	.ndo_get_stats		 = rhine_get_stats,
-	.ndo_set_multicast_list	 = rhine_set_rx_mode,
+	.ndo_set_rx_mode	 = rhine_set_rx_mode,
 	.ndo_change_mtu		 = eth_change_mtu,
 	.ndo_validate_addr	 = eth_validate_addr,
 	.ndo_set_mac_address 	 = eth_mac_addr,
diff --git a/drivers/net/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index deb1eca13c9f..086463b141b6 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -42,7 +42,6 @@
  *
  */
 
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/bitops.h>
@@ -112,7 +111,6 @@ static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
 	BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
 }
 
-
 /**
  *	mac_set_cam_mask	-	Set a CAM mask
  *	@regs: register block for this velocity
@@ -515,10 +513,6 @@ static void velocity_init_cam_filter(struct velocity_info *vptr)
 	mac_set_cam_mask(regs, vptr->mCAMmask);
 
 	/* Enable VCAMs */
-
-	if (test_bit(0, vptr->active_vlans))
-		WORD_REG_BITS_ON(MCFG_RTGOPT, &regs->MCFG);
-
 	for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) {
 		mac_set_vlan_cam(regs, i, (u8 *) &vid);
 		vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
@@ -700,7 +694,6 @@ static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
 	return 0;
 }
 
-
 /**
  *	mii_check_media_mode	-	check media state
  *	@regs: velocity registers
@@ -866,8 +859,6 @@ static u32 check_connection_type(struct mac_regs __iomem *regs)
 	return status;
 }
 
-
-
 /**
  *	velocity_set_media_mode		-	set media mode
  *	@mii_status: old MII link state
@@ -1262,6 +1253,7 @@ static void setup_queue_timers(struct velocity_info *vptr)
 		writeb(rxqueue_timer, &vptr->mac_regs->RQETMR);
 	}
 }
+
 /**
  * setup_adaptive_interrupts  -  Setup interrupt suppression
  *
@@ -1601,8 +1593,6 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
 	vptr->rx.info = NULL;
 }
 
-
-
 /**
  *	velocity_init_rd_ring	-	set up receive ring
  *	@vptr: velocity to configure
@@ -1676,7 +1666,6 @@ static void velocity_free_dma_rings(struct velocity_info *vptr)
 	pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
 }
 
-
 static int velocity_init_rings(struct velocity_info *vptr, int mtu)
 {
 	int ret;
@@ -1739,7 +1728,6 @@ static void velocity_free_tx_buf(struct velocity_info *vptr,
 	tdinfo->skb = NULL;
 }
 
-
 /*
  *	FIXME: could we merge this with velocity_free_tx_buf ?
  */
@@ -1787,7 +1775,6 @@ static void velocity_free_td_ring(struct velocity_info *vptr)
 	}
 }
 
-
 static void velocity_free_rings(struct velocity_info *vptr)
 {
 	velocity_free_td_ring(vptr);
@@ -2025,7 +2012,6 @@ static inline void velocity_iph_realign(struct velocity_info *vptr,
 	}
 }
 
-
 /**
  *	velocity_receive_frame	-	received packet processor
  *	@vptr: velocity we are handling
@@ -2092,11 +2078,11 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 	netif_rx(skb);
 
 	stats->rx_bytes += pkt_len;
+	stats->rx_packets++;
 
 	return 0;
 }
 
-
 /**
  *	velocity_rx_srv		-	service RX interrupt
  *	@vptr: velocity
@@ -2404,7 +2390,6 @@ static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd
 	return 0;
 }
 
-
 /**
  *	velocity_ioctl		-	ioctl entry point
  *	@dev: network device
@@ -2619,15 +2604,14 @@ out:
 	return NETDEV_TX_OK;
 }
 
-
 static const struct net_device_ops velocity_netdev_ops = {
 	.ndo_open		= velocity_open,
 	.ndo_stop		= velocity_close,
 	.ndo_start_xmit		= velocity_xmit,
 	.ndo_get_stats		= velocity_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_set_multicast_list	= velocity_set_multi,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_set_rx_mode	= velocity_set_multi,
 	.ndo_change_mtu		= velocity_change_mtu,
 	.ndo_do_ioctl		= velocity_ioctl,
 	.ndo_vlan_rx_add_vid	= velocity_vlan_rx_add_vid,
@@ -2717,7 +2701,6 @@ static u32 velocity_get_link(struct net_device *dev)
 	return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, &regs->PHYSR0) ? 1 : 0;
 }
 
-
 /**
  *	velocity_found1		-	set up discovered velocity card
  *	@pdev: PCI device
@@ -2864,7 +2847,6 @@ err_free_dev:
 	goto out;
 }
 
-
 #ifdef CONFIG_PM
 /**
  *	wol_calc_crc		-	WOL CRC
@@ -3035,7 +3017,7 @@ static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	spin_lock_irqsave(&vptr->lock, flags);
 	pci_save_state(pdev);
-#ifdef ETHTOOL_GWOL
+
 	if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
 		velocity_get_ip(vptr);
 		velocity_save_context(vptr, &vptr->context);
@@ -3049,9 +3031,7 @@ static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
 		pci_disable_device(pdev);
 		pci_set_power_state(pdev, pci_choose_state(pdev, state));
 	}
-#else
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-#endif
+
 	spin_unlock_irqrestore(&vptr->lock, flags);
 	return 0;
 }
@@ -3132,13 +3112,13 @@ static int velocity_resume(struct pci_dev *pdev)
  *	uses this to handle all our card discover and plugging
  */
 static struct pci_driver velocity_driver = {
-      .name	= VELOCITY_NAME,
-      .id_table	= velocity_id_table,
-      .probe	= velocity_found1,
-      .remove	= __devexit_p(velocity_remove1),
+	.name		= VELOCITY_NAME,
+	.id_table	= velocity_id_table,
+	.probe		= velocity_found1,
+	.remove		= __devexit_p(velocity_remove1),
 #ifdef CONFIG_PM
-      .suspend	= velocity_suspend,
-      .resume	= velocity_resume,
+	.suspend	= velocity_suspend,
+	.resume		= velocity_resume,
 #endif
 };
 
@@ -3448,26 +3428,99 @@ static int velocity_set_coalesce(struct net_device *dev,
 	return 0;
 }
 
+static const char velocity_gstrings[][ETH_GSTRING_LEN] = {
+	"rx_all",
+	"rx_ok",
+	"tx_ok",
+	"rx_error",
+	"rx_runt_ok",
+	"rx_runt_err",
+	"rx_64",
+	"tx_64",
+	"rx_65_to_127",
+	"tx_65_to_127",
+	"rx_128_to_255",
+	"tx_128_to_255",
+	"rx_256_to_511",
+	"tx_256_to_511",
+	"rx_512_to_1023",
+	"tx_512_to_1023",
+	"rx_1024_to_1518",
+	"tx_1024_to_1518",
+	"tx_ether_collisions",
+	"rx_crc_errors",
+	"rx_jumbo",
+	"tx_jumbo",
+	"rx_mac_control_frames",
+	"tx_mac_control_frames",
+	"rx_frame_alignement_errors",
+	"rx_long_ok",
+	"rx_long_err",
+	"tx_sqe_errors",
+	"rx_no_buf",
+	"rx_symbol_errors",
+	"in_range_length_errors",
+	"late_collisions"
+};
+
+static void velocity_get_strings(struct net_device *dev, u32 sset, u8 *data)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		memcpy(data, *velocity_gstrings, sizeof(velocity_gstrings));
+		break;
+	}
+}
+
+static int velocity_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(velocity_gstrings);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void velocity_get_ethtool_stats(struct net_device *dev,
+				       struct ethtool_stats *stats, u64 *data)
+{
+	if (netif_running(dev)) {
+		struct velocity_info *vptr = netdev_priv(dev);
+		u32 *p = vptr->mib_counter;
+		int i;
+
+		spin_lock_irq(&vptr->lock);
+		velocity_update_hw_mibs(vptr);
+		spin_unlock_irq(&vptr->lock);
+
+		for (i = 0; i < ARRAY_SIZE(velocity_gstrings); i++)
+			*data++ = *p++;
+	}
+}
+
 static const struct ethtool_ops velocity_ethtool_ops = {
-	.get_settings	=	velocity_get_settings,
-	.set_settings	=	velocity_set_settings,
-	.get_drvinfo	=	velocity_get_drvinfo,
-	.get_wol	=	velocity_ethtool_get_wol,
-	.set_wol	=	velocity_ethtool_set_wol,
-	.get_msglevel	=	velocity_get_msglevel,
-	.set_msglevel	=	velocity_set_msglevel,
-	.get_link	=	velocity_get_link,
-	.get_coalesce	=	velocity_get_coalesce,
-	.set_coalesce	=	velocity_set_coalesce,
-	.begin		=	velocity_ethtool_up,
-	.complete	=	velocity_ethtool_down
+	.get_settings		= velocity_get_settings,
+	.set_settings		= velocity_set_settings,
+	.get_drvinfo		= velocity_get_drvinfo,
+	.get_wol		= velocity_ethtool_get_wol,
+	.set_wol		= velocity_ethtool_set_wol,
+	.get_msglevel		= velocity_get_msglevel,
+	.set_msglevel		= velocity_set_msglevel,
+	.get_link		= velocity_get_link,
+	.get_strings		= velocity_get_strings,
+	.get_sset_count		= velocity_get_sset_count,
+	.get_ethtool_stats	= velocity_get_ethtool_stats,
+	.get_coalesce		= velocity_get_coalesce,
+	.set_coalesce		= velocity_set_coalesce,
+	.begin			= velocity_ethtool_up,
+	.complete		= velocity_ethtool_down
 };
 
-#ifdef CONFIG_PM
-#ifdef CONFIG_INET
+#if defined(CONFIG_PM) && defined(CONFIG_INET)
 static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
 {
-	struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
+	struct in_ifaddr *ifa = ptr;
 	struct net_device *dev = ifa->ifa_dev->dev;
 
 	if (dev_net(dev) == &init_net &&
@@ -3476,12 +3529,9 @@ static int velocity_netdev_event(struct notifier_block *nb, unsigned long notifi
 
 	return NOTIFY_DONE;
 }
-#endif	/* CONFIG_INET */
-#endif	/* CONFIG_PM */
 
-#if defined(CONFIG_PM) && defined(CONFIG_INET)
 static struct notifier_block velocity_inetaddr_notifier = {
-      .notifier_call	= velocity_netdev_event,
+	.notifier_call	= velocity_netdev_event,
 };
 
 static void velocity_register_notifier(void)
diff --git a/drivers/net/via-velocity.h b/drivers/net/ethernet/via/via-velocity.h
index 4cb9f13485e9..4cb9f13485e9 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/ethernet/via/via-velocity.h
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
new file mode 100644
index 000000000000..d5a826063a82
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -0,0 +1,36 @@
+#
+# Xilink device configuration
+#
+
+config NET_VENDOR_XILINX
+	bool "Xilinx devices"
+	default y
+	depends on PPC || PPC32 || MICROBLAZE
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Xilinx devices. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_XILINX
+
+config XILINX_EMACLITE
+	tristate "Xilinx 10/100 Ethernet Lite support"
+	depends on (PPC32 || MICROBLAZE)
+	select PHYLIB
+	---help---
+	  This driver supports the 10/100 Ethernet Lite from Xilinx.
+
+config XILINX_LL_TEMAC
+	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+	depends on (PPC || MICROBLAZE)
+	select PHYLIB
+	---help---
+	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
+	  core used in Xilinx Spartan and Virtex FPGAs
+
+endif # NET_VENDOR_XILINX
diff --git a/drivers/net/ethernet/xilinx/Makefile b/drivers/net/ethernet/xilinx/Makefile
new file mode 100644
index 000000000000..5feac734ea45
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Xilink network device drivers.
+#
+
+ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
+obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
+obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
diff --git a/drivers/net/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
index 522abe2ff25a..522abe2ff25a 100644
--- a/drivers/net/ll_temac.h
+++ b/drivers/net/ethernet/xilinx/ll_temac.h
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 728fe414147a..570776edc01b 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -922,7 +922,6 @@ static const struct net_device_ops temac_netdev_ops = {
 	.ndo_start_xmit = temac_start_xmit,
 	.ndo_set_mac_address = netdev_set_mac_address,
 	.ndo_validate_addr = eth_validate_addr,
-	//.ndo_set_multicast_list = temac_set_multicast_list,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = temac_poll_controller,
 #endif
diff --git a/drivers/net/ll_temac_mdio.c b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
index 8cf9d4f56bb2..8cf9d4f56bb2 100644
--- a/drivers/net/ll_temac_mdio.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 8018d7d045b0..8018d7d045b0 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
new file mode 100644
index 000000000000..69f56a6de821
--- /dev/null
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -0,0 +1,31 @@
+#
+# Xircom network device configuration
+#
+
+config NET_VENDOR_XIRCOM
+	bool "Xircom devices"
+	default y
+	depends on PCMCIA
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Xircom cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_XIRCOM
+
+config PCMCIA_XIRC2PS
+	tristate "Xircom 16-bit PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
+	  Ethernet or Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called xirc2ps_cs.  If unsure, say N.
+
+endif # NET_VENDOR_XIRCOM
diff --git a/drivers/net/ethernet/xircom/Makefile b/drivers/net/ethernet/xircom/Makefile
new file mode 100644
index 000000000000..3b7aebd8b849
--- /dev/null
+++ b/drivers/net/ethernet/xircom/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Xircom network device drivers.
+#
+
+obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c
index e33b190d716f..bbe8b7dbf3f3 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c
@@ -467,7 +467,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_tx_timeout 	= xirc_tx_timeout,
 	.ndo_set_config		= do_config,
 	.ndo_do_ioctl		= do_ioctl,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
new file mode 100644
index 000000000000..cf67352cea14
--- /dev/null
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -0,0 +1,32 @@
+#
+# Intel XScale IXP device configuration
+#
+
+config NET_VENDOR_XSCALE
+	bool "Intel XScale IXP devices"
+	default y
+	depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \
+		   IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question does not directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about XSacle IXP devices. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_VENDOR_XSCALE
+
+config IXP4XX_ETH
+	tristate "Intel IXP4xx Ethernet support"
+	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+	select PHYLIB
+	---help---
+	  Say Y here if you want to use built-in Ethernet ports
+	  on IXP4xx processor.
+
+source "drivers/net/ethernet/xscale/ixp2000/Kconfig"
+
+endif # NET_VENDOR_XSCALE
diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile
new file mode 100644
index 000000000000..b195b9d7fe81
--- /dev/null
+++ b/drivers/net/ethernet/xscale/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Intel XScale IXP device drivers.
+#
+
+obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
diff --git a/drivers/net/ixp2000/Kconfig b/drivers/net/ethernet/xscale/ixp2000/Kconfig
index 2fec2415651f..58dbc5b876bc 100644
--- a/drivers/net/ixp2000/Kconfig
+++ b/drivers/net/ethernet/xscale/ixp2000/Kconfig
@@ -1,6 +1,6 @@
 config ENP2611_MSF_NET
 	tristate "Radisys ENP2611 MSF network interface support"
 	depends on ARCH_ENP2611
-	help
+	---help---
 	  This is a driver for the MSF network interface unit in
 	  the IXP2400 on the Radisys ENP2611 platform.
diff --git a/drivers/net/ixp2000/Makefile b/drivers/net/ethernet/xscale/ixp2000/Makefile
index fd38351ceaa7..fd38351ceaa7 100644
--- a/drivers/net/ixp2000/Makefile
+++ b/drivers/net/ethernet/xscale/ixp2000/Makefile
diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ethernet/xscale/ixp2000/caleb.c
index 7dea5b95012c..7dea5b95012c 100644
--- a/drivers/net/ixp2000/caleb.c
+++ b/drivers/net/ethernet/xscale/ixp2000/caleb.c
diff --git a/drivers/net/ixp2000/caleb.h b/drivers/net/ethernet/xscale/ixp2000/caleb.h
index e93a1ef5b8a3..e93a1ef5b8a3 100644
--- a/drivers/net/ixp2000/caleb.h
+++ b/drivers/net/ethernet/xscale/ixp2000/caleb.h
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ethernet/xscale/ixp2000/enp2611.c
index 34a6cfd17930..34a6cfd17930 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ethernet/xscale/ixp2000/enp2611.c
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c
index f5ffd7e05d26..f5ffd7e05d26 100644
--- a/drivers/net/ixp2000/ixp2400-msf.c
+++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c
diff --git a/drivers/net/ixp2000/ixp2400-msf.h b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
index 3ac1af2771da..3ac1af2771da 100644
--- a/drivers/net/ixp2000/ixp2400-msf.h
+++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc
index 42a73e357afa..42a73e357afa 100644
--- a/drivers/net/ixp2000/ixp2400_rx.uc
+++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc
diff --git a/drivers/net/ixp2000/ixp2400_rx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode
index e8aee2f81aad..e8aee2f81aad 100644
--- a/drivers/net/ixp2000/ixp2400_rx.ucode
+++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode
diff --git a/drivers/net/ixp2000/ixp2400_tx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
index d090d1884fb7..d090d1884fb7 100644
--- a/drivers/net/ixp2000/ixp2400_tx.uc
+++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
diff --git a/drivers/net/ixp2000/ixp2400_tx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode
index a433e24b0a51..a433e24b0a51 100644
--- a/drivers/net/ixp2000/ixp2400_tx.ucode
+++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ethernet/xscale/ixp2000/ixpdev.c
index e122493ab70e..e122493ab70e 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ethernet/xscale/ixp2000/ixpdev.c
diff --git a/drivers/net/ixp2000/ixpdev.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev.h
index 391ece623243..391ece623243 100644
--- a/drivers/net/ixp2000/ixpdev.h
+++ b/drivers/net/ethernet/xscale/ixp2000/ixpdev.h
diff --git a/drivers/net/ixp2000/ixpdev_priv.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h
index 86aa08ea0c33..86aa08ea0c33 100644
--- a/drivers/net/ixp2000/ixpdev_priv.h
+++ b/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ethernet/xscale/ixp2000/pm3386.c
index e08d3f9863b8..e08d3f9863b8 100644
--- a/drivers/net/ixp2000/pm3386.c
+++ b/drivers/net/ethernet/xscale/ixp2000/pm3386.c
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ethernet/xscale/ixp2000/pm3386.h
index cc4183dca911..cc4183dca911 100644
--- a/drivers/net/ixp2000/pm3386.h
+++ b/drivers/net/ethernet/xscale/ixp2000/pm3386.h
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index de51e8453c13..ec96d910e9a3 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1339,7 +1339,7 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
 	.ndo_open = eth_open,
 	.ndo_stop = eth_close,
 	.ndo_start_xmit = eth_xmit,
-	.ndo_set_multicast_list = eth_set_mcast_list,
+	.ndo_set_rx_mode = eth_set_mcast_list,
 	.ndo_do_ioctl = eth_ioctl,
 	.ndo_change_mtu = eth_change_mtu,
 	.ndo_set_mac_address = eth_mac_addr,
diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
new file mode 100644
index 000000000000..3a424c864f4d
--- /dev/null
+++ b/drivers/net/fddi/Kconfig
@@ -0,0 +1,77 @@
+#
+# FDDI network device configuration
+#
+
+config FDDI
+	tristate "FDDI driver support"
+	depends on PCI || EISA || TC
+	---help---
+	  Fiber Distributed Data Interface is a high speed local area network
+	  design; essentially a replacement for high speed Ethernet. FDDI can
+	  run over copper or fiber. If you are connected to such a network and
+	  want a driver for the FDDI card in your computer, say Y here (and
+	  then also Y to the driver for your FDDI card, below). Most people
+	  will say N.
+
+if FDDI
+
+config DEFXX
+	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+	depends on FDDI && (PCI || EISA || TC)
+	---help---
+	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
+	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+	  to a local FDDI network.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called defxx.  If unsure, say N.
+
+config DEFXX_MMIO
+	bool
+	prompt "Use MMIO instead of PIO" if PCI || EISA
+	depends on DEFXX
+	default n if PCI || EISA
+	default y
+	---help---
+	  This instructs the driver to use EISA or PCI memory-mapped I/O
+	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
+	  Enabling this gives an improvement in processing time in parts
+	  of the driver, but it may cause problems with EISA (DEFEA)
+	  adapters.  TURBOchannel does not have the concept of I/O ports,
+	  so MMIO is always used for these (DEFTA) adapters.
+
+	  If unsure, say N.
+
+config SKFP
+	tristate "SysKonnect FDDI PCI support"
+	depends on FDDI && PCI
+	select BITREVERSE
+	---help---
+	  Say Y here if you have a SysKonnect FDDI PCI adapter.
+	  The following adapters are supported by this driver:
+	  - SK-5521 (SK-NET FDDI-UP)
+	  - SK-5522 (SK-NET FDDI-UP DAS)
+	  - SK-5541 (SK-NET FDDI-FP)
+	  - SK-5543 (SK-NET FDDI-LP)
+	  - SK-5544 (SK-NET FDDI-LP DAS)
+	  - SK-5821 (SK-NET FDDI-UP64)
+	  - SK-5822 (SK-NET FDDI-UP64 DAS)
+	  - SK-5841 (SK-NET FDDI-FP64)
+	  - SK-5843 (SK-NET FDDI-LP64)
+	  - SK-5844 (SK-NET FDDI-LP64 DAS)
+	  - Netelligent 100 FDDI DAS Fibre SC
+	  - Netelligent 100 FDDI SAS Fibre SC
+	  - Netelligent 100 FDDI DAS UTP
+	  - Netelligent 100 FDDI SAS UTP
+	  - Netelligent 100 FDDI SAS Fibre MIC
+
+	  Read <file:Documentation/networking/skfp.txt> for information about
+	  the driver.
+
+	  Questions concerning this driver can be addressed to:
+	  <linux@syskonnect.de>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skfp.  This is recommended.
+
+endif # FDDI
diff --git a/drivers/net/fddi/Makefile b/drivers/net/fddi/Makefile
new file mode 100644
index 000000000000..36da19c9a8aa
--- /dev/null
+++ b/drivers/net/fddi/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux FDDI network device drivers.
+#
+
+obj-$(CONFIG_DEFXX) += defxx.o
+obj-$(CONFIG_SKFP) += skfp/
diff --git a/drivers/net/defxx.c b/drivers/net/fddi/defxx.c
index 417e14385623..4ad80f771099 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -483,7 +483,7 @@ static const struct net_device_ops dfx_netdev_ops = {
 	.ndo_stop		= dfx_close,
 	.ndo_start_xmit		= dfx_xmt_queue_pkt,
 	.ndo_get_stats		= dfx_ctl_get_stats,
-	.ndo_set_multicast_list	= dfx_ctl_set_multicast_list,
+	.ndo_set_rx_mode	= dfx_ctl_set_multicast_list,
 	.ndo_set_mac_address	= dfx_ctl_set_mac_address,
 };
 
diff --git a/drivers/net/defxx.h b/drivers/net/fddi/defxx.h
index 19a6f64df198..19a6f64df198 100644
--- a/drivers/net/defxx.h
+++ b/drivers/net/fddi/defxx.h
diff --git a/drivers/net/skfp/Makefile b/drivers/net/fddi/skfp/Makefile
index b0be0234abf6..b0be0234abf6 100644
--- a/drivers/net/skfp/Makefile
+++ b/drivers/net/fddi/skfp/Makefile
diff --git a/drivers/net/skfp/cfm.c b/drivers/net/fddi/skfp/cfm.c
index e395ace3120b..e395ace3120b 100644
--- a/drivers/net/skfp/cfm.c
+++ b/drivers/net/fddi/skfp/cfm.c
diff --git a/drivers/net/skfp/drvfbi.c b/drivers/net/fddi/skfp/drvfbi.c
index 07da97c303d6..07da97c303d6 100644
--- a/drivers/net/skfp/drvfbi.c
+++ b/drivers/net/fddi/skfp/drvfbi.c
diff --git a/drivers/net/skfp/ecm.c b/drivers/net/fddi/skfp/ecm.c
index 47d922cb3c08..47d922cb3c08 100644
--- a/drivers/net/skfp/ecm.c
+++ b/drivers/net/fddi/skfp/ecm.c
diff --git a/drivers/net/skfp/ess.c b/drivers/net/fddi/skfp/ess.c
index 2fc5987b41dc..2fc5987b41dc 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/fddi/skfp/ess.c
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/fddi/skfp/fplustm.c
index a20ed1a98099..a20ed1a98099 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/fddi/skfp/fplustm.c
diff --git a/drivers/net/skfp/h/cmtdef.h b/drivers/net/fddi/skfp/h/cmtdef.h
index 5a6c6122ccb0..f5bc90ff2a2a 100644
--- a/drivers/net/skfp/h/cmtdef.h
+++ b/drivers/net/fddi/skfp/h/cmtdef.h
@@ -477,8 +477,8 @@ struct s_plc {
 /*
  * function prototypes
  */
-#include "h/mbuf.h"	/* Type definitions for MBUFs */
-#include "h/smtstate.h"	/* struct smt_state */
+#include "mbuf.h"	/* Type definitions for MBUFs */
+#include "smtstate.h"	/* struct smt_state */
 
 void hwt_restart(struct s_smc *smc);	/* hwt.c */
 SMbuf *smt_build_frame(struct s_smc *smc, int class, int type,
diff --git a/drivers/net/skfp/h/fddi.h b/drivers/net/fddi/skfp/h/fddi.h
index c9a28a8a383b..c9a28a8a383b 100644
--- a/drivers/net/skfp/h/fddi.h
+++ b/drivers/net/fddi/skfp/h/fddi.h
diff --git a/drivers/net/skfp/h/fddimib.h b/drivers/net/fddi/skfp/h/fddimib.h
index d1acdc773950..d1acdc773950 100644
--- a/drivers/net/skfp/h/fddimib.h
+++ b/drivers/net/fddi/skfp/h/fddimib.h
diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/fddi/skfp/h/fplustm.h
index d43191ed938b..d43191ed938b 100644
--- a/drivers/net/skfp/h/fplustm.h
+++ b/drivers/net/fddi/skfp/h/fplustm.h
diff --git a/drivers/net/skfp/h/hwmtm.h b/drivers/net/fddi/skfp/h/hwmtm.h
index e1a7e5f683dc..5924d4219e9e 100644
--- a/drivers/net/skfp/h/hwmtm.h
+++ b/drivers/net/fddi/skfp/h/hwmtm.h
@@ -15,7 +15,7 @@
 #ifndef	_HWM_
 #define	_HWM_
 
-#include "h/mbuf.h"
+#include "mbuf.h"
 
 /*
  * MACRO for DMA synchronization:
diff --git a/drivers/net/skfp/h/mbuf.h b/drivers/net/fddi/skfp/h/mbuf.h
index f2aadcda9e7f..f2aadcda9e7f 100644
--- a/drivers/net/skfp/h/mbuf.h
+++ b/drivers/net/fddi/skfp/h/mbuf.h
diff --git a/drivers/net/skfp/h/osdef1st.h b/drivers/net/fddi/skfp/h/osdef1st.h
index 763ca18cbea8..763ca18cbea8 100644
--- a/drivers/net/skfp/h/osdef1st.h
+++ b/drivers/net/fddi/skfp/h/osdef1st.h
diff --git a/drivers/net/skfp/h/sba.h b/drivers/net/fddi/skfp/h/sba.h
index 638cf0283bc4..35ddb44a1120 100644
--- a/drivers/net/skfp/h/sba.h
+++ b/drivers/net/fddi/skfp/h/sba.h
@@ -19,8 +19,8 @@
 #ifndef _SBA_
 #define _SBA_
 
-#include "h/mbuf.h"
-#include "h/sba_def.h"
+#include "mbuf.h"
+#include "sba_def.h"
 
 #ifdef	SBA
 
diff --git a/drivers/net/skfp/h/sba_def.h b/drivers/net/fddi/skfp/h/sba_def.h
index 0459a095d0cd..0459a095d0cd 100644
--- a/drivers/net/skfp/h/sba_def.h
+++ b/drivers/net/fddi/skfp/h/sba_def.h
diff --git a/drivers/net/skfp/h/skfbi.h b/drivers/net/fddi/skfp/h/skfbi.h
index c1ba26c06d73..c1ba26c06d73 100644
--- a/drivers/net/skfp/h/skfbi.h
+++ b/drivers/net/fddi/skfp/h/skfbi.h
diff --git a/drivers/net/skfp/h/skfbiinc.h b/drivers/net/fddi/skfp/h/skfbiinc.h
index ac2d7192f1ca..ce72557c354c 100644
--- a/drivers/net/skfp/h/skfbiinc.h
+++ b/drivers/net/fddi/skfp/h/skfbiinc.h
@@ -15,7 +15,7 @@
 #ifndef	_SKFBIINC_
 #define _SKFBIINC_
 
-#include "h/supern_2.h"
+#include "supern_2.h"
 
 /*
  * special defines for use into .asm files
diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/fddi/skfp/h/smc.h
index c774a95902f5..3ca308b28214 100644
--- a/drivers/net/skfp/h/smc.h
+++ b/drivers/net/fddi/skfp/h/smc.h
@@ -38,18 +38,18 @@
  *	fddi.h
  */
 #ifdef	OSDEF
-#include "h/osdef1st.h"
+#include "osdef1st.h"
 #endif	/* OSDEF */
 #ifdef	OEM_CONCEPT
 #include "oemdef.h"
 #endif	/* OEM_CONCEPT */
-#include "h/smt.h"
-#include "h/cmtdef.h"
-#include "h/fddimib.h"
-#include "h/targethw.h"		/* all target hw dependencies */
-#include "h/targetos.h"		/* all target os dependencies */
+#include "smt.h"
+#include "cmtdef.h"
+#include "fddimib.h"
+#include "targethw.h"		/* all target hw dependencies */
+#include "targetos.h"		/* all target os dependencies */
 #ifdef	ESS
-#include "h/sba.h"
+#include "sba.h"
 #endif
 
 /*
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/fddi/skfp/h/smt.h
index 2030f9cbb24b..2030f9cbb24b 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/fddi/skfp/h/smt.h
diff --git a/drivers/net/skfp/h/smt_p.h b/drivers/net/fddi/skfp/h/smt_p.h
index 99f9be9552bb..99f9be9552bb 100644
--- a/drivers/net/skfp/h/smt_p.h
+++ b/drivers/net/fddi/skfp/h/smt_p.h
diff --git a/drivers/net/skfp/h/smtstate.h b/drivers/net/fddi/skfp/h/smtstate.h
index 62fe695077a9..62fe695077a9 100644
--- a/drivers/net/skfp/h/smtstate.h
+++ b/drivers/net/fddi/skfp/h/smtstate.h
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/fddi/skfp/h/supern_2.h
index 0b73690280f6..0b73690280f6 100644
--- a/drivers/net/skfp/h/supern_2.h
+++ b/drivers/net/fddi/skfp/h/supern_2.h
diff --git a/drivers/net/skfp/h/targethw.h b/drivers/net/fddi/skfp/h/targethw.h
index 626dc7263591..842a690446f3 100644
--- a/drivers/net/skfp/h/targethw.h
+++ b/drivers/net/fddi/skfp/h/targethw.h
@@ -25,11 +25,11 @@
 #define SK_ML_ID_2	0x30
 #endif
 
-#include	"h/skfbi.h"
+#include	"skfbi.h"
 #ifndef TAG_MODE	
-#include	"h/fplus.h"
+#include	"fplus.h"
 #else
-#include	"h/fplustm.h"
+#include	"fplustm.h"
 #endif
 
 #ifndef	HW_PTR
diff --git a/drivers/net/skfp/h/targetos.h b/drivers/net/fddi/skfp/h/targetos.h
index 5d940e7b8ea0..53bacc107160 100644
--- a/drivers/net/skfp/h/targetos.h
+++ b/drivers/net/fddi/skfp/h/targetos.h
@@ -58,7 +58,7 @@
 #define	ADDR(a) (((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), (smc->hw.iop+( ((a)&0x7F) | ((a)>>7 ? 0x80:0)) )) : (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))
 #endif
 
-#include "h/hwmtm.h"
+#include "hwmtm.h"
 
 #define TRUE  1
 #define FALSE 0
diff --git a/drivers/net/skfp/h/types.h b/drivers/net/fddi/skfp/h/types.h
index 5a3bf8378f9e..5a3bf8378f9e 100644
--- a/drivers/net/skfp/h/types.h
+++ b/drivers/net/fddi/skfp/h/types.h
diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/fddi/skfp/hwmtm.c
index e26398b5a7dc..e26398b5a7dc 100644
--- a/drivers/net/skfp/hwmtm.c
+++ b/drivers/net/fddi/skfp/hwmtm.c
diff --git a/drivers/net/skfp/hwt.c b/drivers/net/fddi/skfp/hwt.c
index c0798fd2ca69..c0798fd2ca69 100644
--- a/drivers/net/skfp/hwt.c
+++ b/drivers/net/fddi/skfp/hwt.c
diff --git a/drivers/net/skfp/pcmplc.c b/drivers/net/fddi/skfp/pcmplc.c
index 88d02d0a42c4..88d02d0a42c4 100644
--- a/drivers/net/skfp/pcmplc.c
+++ b/drivers/net/fddi/skfp/pcmplc.c
diff --git a/drivers/net/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c
index 9ac4665d7411..9ac4665d7411 100644
--- a/drivers/net/skfp/pmf.c
+++ b/drivers/net/fddi/skfp/pmf.c
diff --git a/drivers/net/skfp/queue.c b/drivers/net/fddi/skfp/queue.c
index c1a0df455a59..c1a0df455a59 100644
--- a/drivers/net/skfp/queue.c
+++ b/drivers/net/fddi/skfp/queue.c
diff --git a/drivers/net/skfp/rmt.c b/drivers/net/fddi/skfp/rmt.c
index ef8d5672d9e8..ef8d5672d9e8 100644
--- a/drivers/net/skfp/rmt.c
+++ b/drivers/net/fddi/skfp/rmt.c
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/fddi/skfp/skfddi.c
index 16c62659cdd9..3d9a4596a423 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/fddi/skfp/skfddi.c
@@ -167,7 +167,7 @@ static const struct net_device_ops skfp_netdev_ops = {
 	.ndo_start_xmit		= skfp_send_pkt,
 	.ndo_get_stats		= skfp_ctl_get_stats,
 	.ndo_change_mtu		= fddi_change_mtu,
-	.ndo_set_multicast_list = skfp_ctl_set_multicast_list,
+	.ndo_set_rx_mode	= skfp_ctl_set_multicast_list,
 	.ndo_set_mac_address	= skfp_ctl_set_mac_address,
 	.ndo_do_ioctl		= skfp_ioctl,
 };
diff --git a/drivers/net/skfp/smt.c b/drivers/net/fddi/skfp/smt.c
index 08d94329c12f..08d94329c12f 100644
--- a/drivers/net/skfp/smt.c
+++ b/drivers/net/fddi/skfp/smt.c
diff --git a/drivers/net/skfp/smtdef.c b/drivers/net/fddi/skfp/smtdef.c
index 1acab0b368e3..1acab0b368e3 100644
--- a/drivers/net/skfp/smtdef.c
+++ b/drivers/net/fddi/skfp/smtdef.c
diff --git a/drivers/net/skfp/smtinit.c b/drivers/net/fddi/skfp/smtinit.c
index e3a0c0bc2233..e3a0c0bc2233 100644
--- a/drivers/net/skfp/smtinit.c
+++ b/drivers/net/fddi/skfp/smtinit.c
diff --git a/drivers/net/skfp/smttimer.c b/drivers/net/fddi/skfp/smttimer.c
index 531795e98c30..531795e98c30 100644
--- a/drivers/net/skfp/smttimer.c
+++ b/drivers/net/fddi/skfp/smttimer.c
diff --git a/drivers/net/skfp/srf.c b/drivers/net/fddi/skfp/srf.c
index f6f7baf9f27a..f6f7baf9f27a 100644
--- a/drivers/net/skfp/srf.c
+++ b/drivers/net/fddi/skfp/srf.c
diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig
new file mode 100644
index 000000000000..7393eb732ee6
--- /dev/null
+++ b/drivers/net/hippi/Kconfig
@@ -0,0 +1,39 @@
+#
+# HIPPI network device configuration
+#
+
+config HIPPI
+	bool "HIPPI driver support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && INET && PCI
+	---help---
+	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
+	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
+	  can run over copper (25m) or fiber (300m on multi-mode or 10km on
+	  single-mode). HIPPI networks are commonly used for clusters and to
+	  connect to super computers. If you are connected to a HIPPI network
+	  and have a HIPPI network card in your computer that you want to use
+	  under Linux, say Y here (you must also remember to enable the driver
+	  for your HIPPI card below). Most people will say N here.
+
+if HIPPI
+
+config ROADRUNNER
+	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
+	depends on PCI
+	---help---
+	  Say Y here if this is your PCI HIPPI network card.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rrunner.  If unsure, say N.
+
+config ROADRUNNER_LARGE_RINGS
+	bool "Use large TX/RX rings (EXPERIMENTAL)"
+	depends on ROADRUNNER
+	---help---
+	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
+	  of additional memory to allow for fastest operation, both for
+	  transmitting and receiving. This memory cannot be used by any other
+	  kernel code or by user space programs. Say Y here only if you have
+	  the memory.
+
+endif /* HIPPI */
diff --git a/drivers/net/hippi/Makefile b/drivers/net/hippi/Makefile
new file mode 100644
index 000000000000..b95d629baee5
--- /dev/null
+++ b/drivers/net/hippi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the HIPPI network device drivers.
+#
+
+obj-$(CONFIG_ROADRUNNER) += rrunner.o
diff --git a/drivers/net/rrunner.c b/drivers/net/hippi/rrunner.c
index e68c941926f1..e68c941926f1 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
diff --git a/drivers/net/rrunner.h b/drivers/net/hippi/rrunner.h
index 28169043ae49..28169043ae49 100644
--- a/drivers/net/rrunner.h
+++ b/drivers/net/hippi/rrunner.h
diff --git a/drivers/net/ibm_newemac/Makefile b/drivers/net/ibm_newemac/Makefile
deleted file mode 100644
index 0b5c99512762..000000000000
--- a/drivers/net/ibm_newemac/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the PowerPC 4xx on-chip ethernet driver
-#
-
-obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac.o
-
-ibm_newemac-y := mal.o core.o phy.o
-ibm_newemac-$(CONFIG_IBM_NEW_EMAC_ZMII) += zmii.o
-ibm_newemac-$(CONFIG_IBM_NEW_EMAC_RGMII) += rgmii.o
-ibm_newemac-$(CONFIG_IBM_NEW_EMAC_TAH) += tah.o
-ibm_newemac-$(CONFIG_IBM_NEW_EMAC_DEBUG) += debug.o
diff --git a/drivers/net/irda/sh_irda.c b/drivers/net/irda/sh_irda.c
index 4488bd581eca..82660672dcd9 100644
--- a/drivers/net/irda/sh_irda.c
+++ b/drivers/net/irda/sh_irda.c
@@ -22,6 +22,8 @@
  *  - DMA transfer support
  *  - FIFO mode support
  */
+#include <linux/io.h>
+#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c
index 52a7c86af663..ed7d7d62bf68 100644
--- a/drivers/net/irda/sh_sir.c
+++ b/drivers/net/irda/sh_sir.c
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/io.h>
+#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -511,7 +513,7 @@ static void sh_sir_tx(struct sh_sir_self *self, int phase)
 
 static int sh_sir_read_data(struct sh_sir_self *self)
 {
-	u16 val;
+	u16 val = 0;
 	int timeout = 1024;
 
 	while (timeout--) {
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 954f6e938fb7..8b1c3484d271 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -2405,8 +2405,6 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
  * addresses making a subsystem device table necessary.
  */
 #ifdef CONFIG_PCI
-#define PCIID_VENDOR_INTEL 0x8086
-#define PCIID_VENDOR_ALI 0x10b9
 static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
 	/*
 	 * Subsystems needing entries:
@@ -2416,7 +2414,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
 	 */
 	{
 		/* Guessed entry */
-		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+		.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
 		.device = 0x24cc,
 		.subvendor = 0x103c,
 		.subdevice = 0x08bc,
@@ -2429,7 +2427,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
 		.name = "HP nx5000 family",
 	},
 	{
-		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+		.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
 		.device = 0x24cc,
 		.subvendor = 0x103c,
 		.subdevice = 0x088c,
@@ -2443,7 +2441,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
 		.name = "HP nc8000 family",
 	},
 	{
-		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+		.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
 		.device = 0x24cc,
 		.subvendor = 0x103c,
 		.subdevice = 0x0890,
@@ -2456,7 +2454,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
 		.name = "HP nc6000 family",
 	},
 	{
-		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+		.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
 		.device = 0x24cc,
 		.subvendor = 0x0e11,
 		.subdevice = 0x0860,
@@ -2471,7 +2469,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
 	},
 	{
 		/* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
-		.vendor = PCIID_VENDOR_INTEL,
+		.vendor = PCI_VENDOR_ID_INTEL,
 		.device = 0x24c0,
 		.subvendor = 0x1179,
 		.subdevice = 0xffff, /* 0xffff is "any" */
@@ -2484,7 +2482,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
 		.name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
 	},
 	{
-		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
+		.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801CAM ISA bridge */
 		.device = 0x248c,
 		.subvendor = 0x1179,
 		.subdevice = 0xffff, /* 0xffff is "any" */
@@ -2498,7 +2496,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
 	},
 	{
 		/* 82801DBM (ICH4-M) LPC Interface Bridge */
-		.vendor = PCIID_VENDOR_INTEL,
+		.vendor = PCI_VENDOR_ID_INTEL,
 		.device = 0x24cc,
 		.subvendor = 0x1179,
 		.subdevice = 0xffff, /* 0xffff is "any" */
@@ -2512,7 +2510,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
 	},
 	{
 		/* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
-		.vendor = PCIID_VENDOR_ALI,
+		.vendor = PCI_VENDOR_ID_AL,
 		.device = 0x1533,
 		.subvendor = 0x1179,
 		.subdevice = 0xffff, /* 0xffff is "any" */
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 05172c39a0ce..836e13fcb3ec 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -561,7 +561,7 @@ static const struct net_device_ops macvlan_netdev_ops = {
 	.ndo_change_mtu		= macvlan_change_mtu,
 	.ndo_change_rx_flags	= macvlan_change_rx_flags,
 	.ndo_set_mac_address	= macvlan_set_mac_address,
-	.ndo_set_multicast_list	= macvlan_set_multicast_list,
+	.ndo_set_rx_mode	= macvlan_set_multicast_list,
 	.ndo_get_stats64	= macvlan_dev_get_stats64,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_vlan_rx_add_vid	= macvlan_vlan_rx_add_vid,
diff --git a/drivers/net/octeon/Makefile b/drivers/net/octeon/Makefile
deleted file mode 100644
index 906edecacfd3..000000000000
--- a/drivers/net/octeon/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-
-obj-$(CONFIG_OCTEON_MGMT_ETHERNET)	+= octeon_mgmt.o
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
deleted file mode 100644
index c0f23376a462..000000000000
--- a/drivers/net/pci-skeleton.c
+++ /dev/null
@@ -1,1923 +0,0 @@
-/*
-
-	drivers/net/pci-skeleton.c
-
-	Maintained by Jeff Garzik <jgarzik@pobox.com>
-
-	Original code came from 8139too.c, which in turns was based
-	originally on Donald Becker's rtl8139.c driver, versions 1.11
-	and older.  This driver was originally based on rtl8139.c
-	version 1.07.  Header of rtl8139.c version 1.11:
-
-	-----<snip>-----
-
-		Written 1997-2000 by Donald Becker.
-		This software may be used and distributed according to the
-		terms of the GNU General Public License (GPL), incorporated
-		herein by reference.  Drivers based on or derived from this
-		code fall under the GPL and must retain the authorship,
-		copyright and license notice.  This file is not a complete
-		program and may only be used when the entire operating
-		system is licensed under the GPL.
-
-		This driver is for boards based on the RTL8129 and RTL8139
-		PCI ethernet chips.
-
-		The author may be reached as becker@scyld.com, or C/O Scyld
-		Computing Corporation 410 Severn Ave., Suite 210 Annapolis
-		MD 21403
-
-		Support and updates available at
-		http://www.scyld.com/network/rtl8139.html
-
-		Twister-tuning table provided by Kinston
-		<shangh@realtek.com.tw>.
-
-	-----<snip>-----
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-
------------------------------------------------------------------------------
-
-				Theory of Operation
-
-I. Board Compatibility
-
-This device driver is designed for the RealTek RTL8139 series, the RealTek
-Fast Ethernet controllers for PCI and CardBus.  This chip is used on many
-low-end boards, sometimes with its markings changed.
-
-
-II. Board-specific settings
-
-PCI bus devices are configured by the system at boot time, so no jumpers
-need to be set on the board.  The system BIOS will assign the
-PCI INTA signal to a (preferably otherwise unused) system IRQ line.
-
-III. Driver operation
-
-IIIa. Rx Ring buffers
-
-The receive unit uses a single linear ring buffer rather than the more
-common (and more efficient) descriptor-based architecture.  Incoming frames
-are sequentially stored into the Rx region, and the host copies them into
-skbuffs.
-
-Comment: While it is theoretically possible to process many frames in place,
-any delay in Rx processing would cause us to drop frames.  More importantly,
-the Linux protocol stack is not designed to operate in this manner.
-
-IIIb. Tx operation
-
-The RTL8139 uses a fixed set of four Tx descriptors in register space.
-In a stunningly bad design choice, Tx frames must be 32 bit aligned.  Linux
-aligns the IP header on word boundaries, and 14 byte ethernet header means
-that almost all frames will need to be copied to an alignment buffer.
-
-IVb. References
-
-http://www.realtek.com.tw/
-http://www.scyld.com/expert/NWay.html
-
-IVc. Errata
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/crc32.h>
-#include <linux/io.h>
-
-#define NETDRV_VERSION		"1.0.1"
-#define MODNAME			"netdrv"
-#define NETDRV_DRIVER_LOAD_MSG	"MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded"
-
-static char version[] __devinitdata =
-	KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-	"  Support available from http://foo.com/bar/baz.html\n";
-
-/* define to 1 to enable PIO instead of MMIO */
-#undef USE_IO_OPS
-
-/* define to 1 to enable copious debugging info */
-#undef NETDRV_DEBUG
-
-/* define to 1 to disable lightweight runtime debugging checks */
-#undef NETDRV_NDEBUG
-
-
-#ifdef NETDRV_DEBUG
-/* note: prints function name for you */
-#define DPRINTK(fmt, args...)					\
-	printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
-#else
-#define DPRINTK(fmt, args...)				\
-do {							\
-	if (0)						\
-		printk(KERN_DEBUG fmt, ##args);		\
-} while (0)
-#endif
-
-#ifdef NETDRV_NDEBUG
-#define assert(expr) do {} while (0)
-#else
-#define assert(expr)						\
-	if (!(expr)) {						\
-		printk("Assertion failed! %s,%s,%s,line=%d\n",	\
-		       #expr, __FILE__, __func__, __LINE__);	\
-	}
-#endif
-
-
-/* A few user-configurable values. */
-/* media options */
-static int media[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
-
-/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
-   The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
-static int multicast_filter_limit = 32;
-
-/* Size of the in-memory receive ring. */
-#define RX_BUF_LEN_IDX	2	/* 0==8K, 1==16K, 2==32K, 3==64K */
-#define RX_BUF_LEN	(8192 << RX_BUF_LEN_IDX)
-#define RX_BUF_PAD	16
-#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
-#define RX_BUF_TOT_LEN	(RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
-
-/* Number of Tx descriptor registers. */
-#define NUM_TX_DESC	4
-
-/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
-#define MAX_ETH_FRAME_SIZE	1536
-
-/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
-#define TX_BUF_SIZE	MAX_ETH_FRAME_SIZE
-#define TX_BUF_TOT_LEN	(TX_BUF_SIZE * NUM_TX_DESC)
-
-/* PCI Tuning Parameters
-   Threshold is bytes transferred to chip before transmission starts. */
-#define TX_FIFO_THRESH	256	/* In bytes, rounded down to 32 byte units. */
-
-/* The following settings are log_2(bytes)-4:
-   0==16 bytes 1==32 2==64 3==128 4==256 5==512 6==1024 7==end of packet.
-*/
-#define RX_FIFO_THRESH	6	/* Rx buffer level before first PCI xfer.  */
-#define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
-#define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
-
-
-/* Operational parameters that usually are not changed. */
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT	(6 * HZ)
-
-enum {
-	HAS_CHIP_XCVR = 0x020000,
-	HAS_LNK_CHNG = 0x040000,
-};
-
-#define NETDRV_MIN_IO_SIZE 0x80
-#define RTL8139B_IO_SIZE 256
-
-#define NETDRV_CAPS	(HAS_CHIP_XCVR | HAS_LNK_CHNG)
-
-typedef enum {
-	RTL8139 = 0,
-	NETDRV_CB,
-	SMC1211TX,
-	/*MPX5030,*/
-	DELTA8139,
-	ADDTRON8139,
-} board_t;
-
-
-/* indexed by board_t, above */
-static struct {
-	const char *name;
-} board_info[] __devinitdata = {
-	{ "RealTek RTL8139 Fast Ethernet" },
-	{ "RealTek RTL8139B PCI/CardBus" },
-	{ "SMC1211TX EZCard 10/100 (RealTek RTL8139)" },
-/*	{ MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/
-	{ "Delta Electronics 8139 10/100BaseTX" },
-	{ "Addtron Technology 8139 10/100BaseTX" },
-};
-
-
-static DEFINE_PCI_DEVICE_TABLE(netdrv_pci_tbl) = {
-	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
-	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB },
-	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX },
-/*	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MPX5030 },*/
-	{0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DELTA8139 },
-	{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 },
-	{0,}
-};
-MODULE_DEVICE_TABLE(pci, netdrv_pci_tbl);
-
-
-/* The rest of these values should never change. */
-
-/* Symbolic offsets to registers. */
-enum NETDRV_registers {
-	MAC0 = 0,		/* Ethernet hardware address. */
-	MAR0 = 8,		/* Multicast filter. */
-	TxStatus0 = 0x10,	/* Transmit status (Four 32bit registers). */
-	TxAddr0 = 0x20,		/* Tx descriptors (also four 32bit). */
-	RxBuf = 0x30,
-	RxEarlyCnt = 0x34,
-	RxEarlyStatus = 0x36,
-	ChipCmd = 0x37,
-	RxBufPtr = 0x38,
-	RxBufAddr = 0x3A,
-	IntrMask = 0x3C,
-	IntrStatus = 0x3E,
-	TxConfig = 0x40,
-	ChipVersion = 0x43,
-	RxConfig = 0x44,
-	Timer = 0x48,		/* A general-purpose counter. */
-	RxMissed = 0x4C,	/* 24 bits valid, write clears. */
-	Cfg9346 = 0x50,
-	Config0 = 0x51,
-	Config1 = 0x52,
-	FlashReg = 0x54,
-	MediaStatus = 0x58,
-	Config3 = 0x59,
-	Config4 = 0x5A,		/* absent on RTL-8139A */
-	HltClk = 0x5B,
-	MultiIntr = 0x5C,
-	TxSummary = 0x60,
-	BasicModeCtrl = 0x62,
-	BasicModeStatus = 0x64,
-	NWayAdvert = 0x66,
-	NWayLPAR = 0x68,
-	NWayExpansion = 0x6A,
-	/* Undocumented registers, but required for proper operation. */
-	FIFOTMS = 0x70,		/* FIFO Control and test. */
-	CSCR = 0x74,		/* Chip Status and Configuration Register. */
-	PARA78 = 0x78,
-	PARA7c = 0x7c,		/* Magic transceiver parameter register. */
-	Config5 = 0xD8,		/* absent on RTL-8139A */
-};
-
-enum ClearBitMasks {
-	MultiIntrClear = 0xF000,
-	ChipCmdClear = 0xE2,
-	Config1Clear = (1 << 7) | (1 << 6) | (1 << 3) | (1 << 2) | (1 << 1),
-};
-
-enum ChipCmdBits {
-	CmdReset = 0x10,
-	CmdRxEnb = 0x08,
-	CmdTxEnb = 0x04,
-	RxBufEmpty = 0x01,
-};
-
-/* Interrupt register bits, using my own meaningful names. */
-enum IntrStatusBits {
-	PCIErr = 0x8000,
-	PCSTimeout = 0x4000,
-	RxFIFOOver = 0x40,
-	RxUnderrun = 0x20,
-	RxOverflow = 0x10,
-	TxErr = 0x08,
-	TxOK = 0x04,
-	RxErr = 0x02,
-	RxOK = 0x01,
-};
-enum TxStatusBits {
-	TxHostOwns = 0x2000,
-	TxUnderrun = 0x4000,
-	TxStatOK = 0x8000,
-	TxOutOfWindow = 0x20000000,
-	TxAborted = 0x40000000,
-	TxCarrierLost = 0x80000000,
-};
-enum RxStatusBits {
-	RxMulticast = 0x8000,
-	RxPhysical = 0x4000,
-	RxBroadcast = 0x2000,
-	RxBadSymbol = 0x0020,
-	RxRunt = 0x0010,
-	RxTooLong = 0x0008,
-	RxCRCErr = 0x0004,
-	RxBadAlign = 0x0002,
-	RxStatusOK = 0x0001,
-};
-
-/* Bits in RxConfig. */
-enum rx_mode_bits {
-	AcceptErr = 0x20,
-	AcceptRunt = 0x10,
-	AcceptBroadcast = 0x08,
-	AcceptMulticast = 0x04,
-	AcceptMyPhys = 0x02,
-	AcceptAllPhys = 0x01,
-};
-
-/* Bits in TxConfig. */
-enum tx_config_bits {
-	TxIFG1 = (1 << 25),	/* Interframe Gap Time */
-	TxIFG0 = (1 << 24),	/* Enabling these bits violates IEEE 802.3 */
-	TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
-	TxCRC = (1 << 16),	/* DISABLE appending CRC to end of Tx packets */
-	TxClearAbt = (1 << 0),	/* Clear abort (WO) */
-	TxDMAShift = 8,		/* DMA burst value(0-7) is shift this many bits */
-
-	TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
-};
-
-/* Bits in Config1 */
-enum Config1Bits {
-	Cfg1_PM_Enable = 0x01,
-	Cfg1_VPD_Enable = 0x02,
-	Cfg1_PIO = 0x04,
-	Cfg1_MMIO = 0x08,
-	Cfg1_LWAKE = 0x10,
-	Cfg1_Driver_Load = 0x20,
-	Cfg1_LED0 = 0x40,
-	Cfg1_LED1 = 0x80,
-};
-
-enum RxConfigBits {
-	/* Early Rx threshold, none or X/16 */
-	RxCfgEarlyRxNone = 0,
-	RxCfgEarlyRxShift = 24,
-
-	/* rx fifo threshold */
-	RxCfgFIFOShift = 13,
-	RxCfgFIFONone = (7 << RxCfgFIFOShift),
-
-	/* Max DMA burst */
-	RxCfgDMAShift = 8,
-	RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
-
-	/* rx ring buffer length */
-	RxCfgRcv8K = 0,
-	RxCfgRcv16K = (1 << 11),
-	RxCfgRcv32K = (1 << 12),
-	RxCfgRcv64K = (1 << 11) | (1 << 12),
-
-	/* Disable packet wrap at end of Rx buffer */
-	RxNoWrap = (1 << 7),
-};
-
-
-/* Twister tuning parameters from RealTek.
-   Completely undocumented, but required to tune bad links. */
-enum CSCRBits {
-	CSCR_LinkOKBit = 0x0400,
-	CSCR_LinkChangeBit = 0x0800,
-	CSCR_LinkStatusBits = 0x0f000,
-	CSCR_LinkDownOffCmd = 0x003c0,
-	CSCR_LinkDownCmd = 0x0f3c0,
-};
-
-
-enum Cfg9346Bits {
-	Cfg9346_Lock = 0x00,
-	Cfg9346_Unlock = 0xC0,
-};
-
-
-#define PARA78_default	0x78fa8388
-#define PARA7c_default	0xcb38de43	/* param[0][3] */
-#define PARA7c_xxx		0xcb38de43
-static const unsigned long param[4][4] = {
-	{0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
-	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
-	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
-	{0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
-};
-
-struct ring_info {
-	struct sk_buff *skb;
-	dma_addr_t mapping;
-};
-
-
-typedef enum {
-	CH_8139 = 0,
-	CH_8139_K,
-	CH_8139A,
-	CH_8139B,
-	CH_8130,
-	CH_8139C,
-} chip_t;
-
-
-/* directly indexed by chip_t, above */
-static const struct {
-	const char *name;
-	u8 version; /* from RTL8139C docs */
-	u32 RxConfigMask; /* should clear the bits supported by this chip */
-} rtl_chip_info[] = {
-	{ "RTL-8139",
-	  0x40,
-	  0xf0fe0040, /* XXX copied from RTL8139A, verify */
-	},
-
-	{ "RTL-8139 rev K",
-	  0x60,
-	  0xf0fe0040,
-	},
-
-	{ "RTL-8139A",
-	  0x70,
-	  0xf0fe0040,
-	},
-
-	{ "RTL-8139B",
-	  0x78,
-	  0xf0fc0040
-	},
-
-	{ "RTL-8130",
-	  0x7C,
-	  0xf0fe0040, /* XXX copied from RTL8139A, verify */
-	},
-
-	{ "RTL-8139C",
-	  0x74,
-	  0xf0fc0040, /* XXX copied from RTL8139B, verify */
-	},
-
-};
-
-
-struct netdrv_private {
-	board_t board;
-	void *mmio_addr;
-	int drv_flags;
-	struct pci_dev *pci_dev;
-	struct timer_list timer;	/* Media selection timer. */
-	unsigned char *rx_ring;
-	unsigned int cur_rx;	/* Index into the Rx buffer of next Rx pkt. */
-	unsigned int tx_flag;
-	atomic_t cur_tx;
-	atomic_t dirty_tx;
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct ring_info tx_info[NUM_TX_DESC];
-	unsigned char *tx_buf[NUM_TX_DESC];	/* Tx bounce buffers */
-	unsigned char *tx_bufs;	/* Tx bounce buffer region. */
-	dma_addr_t rx_ring_dma;
-	dma_addr_t tx_bufs_dma;
-	char phys[4];		/* MII device addresses. */
-	char twistie, twist_row, twist_col;	/* Twister tune state. */
-	unsigned int full_duplex:1;	/* Full-duplex operation requested. */
-	unsigned int duplex_lock:1;
-	unsigned int default_port:4;	/* Last dev->if_port value. */
-	unsigned int media2:4;	/* Secondary monitored media port. */
-	unsigned int medialock:1;	/* Don't sense media type. */
-	unsigned int mediasense:1;	/* Media sensing in progress. */
-	spinlock_t lock;
-	chip_t chipset;
-};
-
-MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION("Skeleton for a PCI Fast Ethernet driver");
-MODULE_LICENSE("GPL");
-module_param(multicast_filter_limit, int, 0);
-module_param(max_interrupt_work, int, 0);
-module_param_array(media, int, NULL, 0);
-MODULE_PARM_DESC(multicast_filter_limit,
-		 MODNAME " maximum number of filtered multicast addresses");
-MODULE_PARM_DESC(max_interrupt_work,
-		 MODNAME " maximum events handled per interrupt");
-MODULE_PARM_DESC(media,
-		 MODNAME " Bits 0-3: media type, bit 17: full duplex");
-
-static int read_eeprom(void *ioaddr, int location, int addr_len);
-static int netdrv_open(struct net_device *dev);
-static int mdio_read(struct net_device *dev, int phy_id, int location);
-static void mdio_write(struct net_device *dev, int phy_id, int location,
-		       int val);
-static void netdrv_timer(unsigned long data);
-static void netdrv_tx_timeout(struct net_device *dev);
-static void netdrv_init_ring(struct net_device *dev);
-static int netdrv_start_xmit(struct sk_buff *skb,
-			     struct net_device *dev);
-static irqreturn_t netdrv_interrupt(int irq, void *dev_instance);
-static int netdrv_close(struct net_device *dev);
-static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void netdrv_set_rx_mode(struct net_device *dev);
-static void netdrv_hw_start(struct net_device *dev);
-
-
-#ifdef USE_IO_OPS
-
-#define NETDRV_R8(reg)		inb(((unsigned long)ioaddr) + (reg))
-#define NETDRV_R16(reg)		inw(((unsigned long)ioaddr) + (reg))
-#define NETDRV_R32(reg)		((unsigned long)inl(((unsigned long)ioaddr) + (reg)))
-#define NETDRV_W8(reg, val8)	outb((val8), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W16(reg, val16)	outw((val16), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W32(reg, val32)	outl((val32), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W8_F		NETDRV_W8
-#define NETDRV_W16_F		NETDRV_W16
-#define NETDRV_W32_F		NETDRV_W32
-#undef readb
-#undef readw
-#undef readl
-#undef writeb
-#undef writew
-#undef writel
-#define readb(addr) inb((unsigned long)(addr))
-#define readw(addr) inw((unsigned long)(addr))
-#define readl(addr) inl((unsigned long)(addr))
-#define writeb(val, addr) outb((val), (unsigned long)(addr))
-#define writew(val, addr) outw((val), (unsigned long)(addr))
-#define writel(val, addr) outl((val), (unsigned long)(addr))
-
-#else
-
-/* write MMIO register, with flush */
-/* Flush avoids rtl8139 bug w/ posted MMIO writes */
-#define NETDRV_W8_F(reg, val8)			\
-do {						\
-	writeb((val8), ioaddr + (reg));		\
-	readb(ioaddr + (reg));			\
-} while (0)
-#define NETDRV_W16_F(reg, val16)		\
-do {						\
-	writew((val16), ioaddr + (reg));	\
-	readw(ioaddr + (reg));			\
-} while (0)
-#define NETDRV_W32_F(reg, val32)		\
-do {						\
-	writel((val32), ioaddr + (reg));	\
-	readl(ioaddr + (reg));			\
-} while (0)
-
-
-#ifdef MMIO_FLUSH_AUDIT_COMPLETE
-
-/* write MMIO register */
-#define NETDRV_W8(reg, val8)	writeb((val8), ioaddr + (reg))
-#define NETDRV_W16(reg, val16)	writew((val16), ioaddr + (reg))
-#define NETDRV_W32(reg, val32)	writel((val32), ioaddr + (reg))
-
-#else
-
-/* write MMIO register, then flush */
-#define NETDRV_W8		NETDRV_W8_F
-#define NETDRV_W16		NETDRV_W16_F
-#define NETDRV_W32		NETDRV_W32_F
-
-#endif /* MMIO_FLUSH_AUDIT_COMPLETE */
-
-/* read MMIO register */
-#define NETDRV_R8(reg)		readb(ioaddr + (reg))
-#define NETDRV_R16(reg)		readw(ioaddr + (reg))
-#define NETDRV_R32(reg)		((unsigned long) readl(ioaddr + (reg)))
-
-#endif /* USE_IO_OPS */
-
-
-static const u16 netdrv_intr_mask =
-	PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
-	TxErr | TxOK | RxErr | RxOK;
-
-static const unsigned int netdrv_rx_config =
-	RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
-	(RX_FIFO_THRESH << RxCfgFIFOShift) |
-	(RX_DMA_BURST << RxCfgDMAShift);
-
-
-static int __devinit netdrv_init_board(struct pci_dev *pdev,
-				       struct net_device **dev_out,
-				       void **ioaddr_out)
-{
-	void *ioaddr = NULL;
-	struct net_device *dev;
-	struct netdrv_private *tp;
-	int rc, i;
-	u32 pio_start, pio_end, pio_flags, pio_len;
-	unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
-	u32 tmp;
-
-	DPRINTK("ENTER\n");
-
-	assert(pdev != NULL);
-	assert(ioaddr_out != NULL);
-
-	*ioaddr_out = NULL;
-	*dev_out = NULL;
-
-	/* dev zeroed in alloc_etherdev */
-	dev = alloc_etherdev(sizeof(*tp));
-	if (dev == NULL) {
-		dev_err(&pdev->dev, "unable to alloc new ethernet\n");
-		DPRINTK("EXIT, returning -ENOMEM\n");
-		return -ENOMEM;
-	}
-	SET_NETDEV_DEV(dev, &pdev->dev);
-	tp = netdev_priv(dev);
-
-	/* enable device(incl. PCI PM wakeup), and bus-mastering */
-	rc = pci_enable_device(pdev);
-	if (rc)
-		goto err_out;
-
-	pio_start = pci_resource_start(pdev, 0);
-	pio_end = pci_resource_end(pdev, 0);
-	pio_flags = pci_resource_flags(pdev, 0);
-	pio_len = pci_resource_len(pdev, 0);
-
-	mmio_start = pci_resource_start(pdev, 1);
-	mmio_end = pci_resource_end(pdev, 1);
-	mmio_flags = pci_resource_flags(pdev, 1);
-	mmio_len = pci_resource_len(pdev, 1);
-
-	/* set this immediately, we need to know before
-	 * we talk to the chip directly */
-	DPRINTK("PIO region size == %#02X\n", pio_len);
-	DPRINTK("MMIO region size == %#02lX\n", mmio_len);
-
-	/* make sure PCI base addr 0 is PIO */
-	if (!(pio_flags & IORESOURCE_IO)) {
-		dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-
-	/* make sure PCI base addr 1 is MMIO */
-	if (!(mmio_flags & IORESOURCE_MEM)) {
-		dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-
-	/* check for weird/broken PCI region reporting */
-	if ((pio_len < NETDRV_MIN_IO_SIZE) ||
-	    (mmio_len < NETDRV_MIN_IO_SIZE)) {
-		dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-
-	rc = pci_request_regions(pdev, MODNAME);
-	if (rc)
-		goto err_out;
-
-	pci_set_master(pdev);
-
-#ifdef USE_IO_OPS
-	ioaddr = (void *)pio_start;
-#else
-	/* ioremap MMIO region */
-	ioaddr = ioremap(mmio_start, mmio_len);
-	if (ioaddr == NULL) {
-		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
-		rc = -EIO;
-		goto err_out_free_res;
-	}
-#endif /* USE_IO_OPS */
-
-	/* Soft reset the chip. */
-	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
-
-	/* Check that the chip has finished the reset. */
-	for (i = 1000; i > 0; i--)
-		if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
-			break;
-		else
-			udelay(10);
-
-	/* Bring the chip out of low-power mode. */
-	/* <insert device-specific code here> */
-
-#ifndef USE_IO_OPS
-	/* sanity checks -- ensure PIO and MMIO registers agree */
-	assert(inb(pio_start+Config0) == readb(ioaddr+Config0));
-	assert(inb(pio_start+Config1) == readb(ioaddr+Config1));
-	assert(inb(pio_start+TxConfig) == readb(ioaddr+TxConfig));
-	assert(inb(pio_start+RxConfig) == readb(ioaddr+RxConfig));
-#endif /* !USE_IO_OPS */
-
-	/* identify chip attached to board */
-	tmp = NETDRV_R8(ChipVersion);
-	for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--)
-		if (tmp == rtl_chip_info[i].version) {
-			tp->chipset = i;
-			goto match;
-		}
-
-	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		   "unknown chip version, assuming RTL-8139\n");
-	dev_printk(KERN_DEBUG, &pdev->dev, "TxConfig = %#lx\n",
-		   NETDRV_R32(TxConfig));
-	tp->chipset = 0;
-
-match:
-	DPRINTK("chipset id(%d) == index %d, '%s'\n",
-		tmp, tp->chipset, rtl_chip_info[tp->chipset].name);
-
-	rc = register_netdev(dev);
-	if (rc)
-		goto err_out_unmap;
-
-	DPRINTK("EXIT, returning 0\n");
-	*ioaddr_out = ioaddr;
-	*dev_out = dev;
-	return 0;
-
-err_out_unmap:
-#ifndef USE_IO_OPS
-	iounmap(ioaddr);
-err_out_free_res:
-#endif
-	pci_release_regions(pdev);
-err_out:
-	free_netdev(dev);
-	DPRINTK("EXIT, returning %d\n", rc);
-	return rc;
-}
-
-static const struct net_device_ops netdrv_netdev_ops = {
-	.ndo_open		= netdrv_open,
-	.ndo_stop		= netdrv_close,
-	.ndo_start_xmit		= netdrv_start_xmit,
-	.ndo_set_multicast_list	= netdrv_set_rx_mode,
-	.ndo_do_ioctl		= netdrv_ioctl,
-	.ndo_tx_timeout		= netdrv_tx_timeout,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-};
-
-static int __devinit netdrv_init_one(struct pci_dev *pdev,
-				     const struct pci_device_id *ent)
-{
-	struct net_device *dev = NULL;
-	struct netdrv_private *tp;
-	int i, addr_len, option;
-	void *ioaddr = NULL;
-	static int board_idx = -1;
-
-/* when built into the kernel, we only print version if device is found */
-#ifndef MODULE
-	static int printed_version;
-	if (!printed_version++)
-		printk(version);
-#endif
-
-	DPRINTK("ENTER\n");
-
-	assert(pdev != NULL);
-	assert(ent != NULL);
-
-	board_idx++;
-
-	i = netdrv_init_board(pdev, &dev, &ioaddr);
-	if (i < 0) {
-		DPRINTK("EXIT, returning %d\n", i);
-		return i;
-	}
-
-	tp = netdev_priv(dev);
-
-	assert(ioaddr != NULL);
-	assert(dev != NULL);
-	assert(tp != NULL);
-
-	addr_len = read_eeprom(ioaddr, 0, 8) == 0x8129 ? 8 : 6;
-	for (i = 0; i < 3; i++)
-		((u16 *)(dev->dev_addr))[i] =
-			le16_to_cpu(read_eeprom(ioaddr, i + 7, addr_len));
-
-	dev->netdev_ops = &netdrv_netdev_ops;
-	dev->watchdog_timeo = TX_TIMEOUT;
-
-	dev->irq = pdev->irq;
-	dev->base_addr = (unsigned long) ioaddr;
-
-	/* netdev_priv()/tp zeroed and aligned in alloc_etherdev */
-	tp = netdev_priv(dev);
-
-	/* note: tp->chipset set in netdrv_init_board */
-	tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-		PCI_COMMAND_MASTER | NETDRV_CAPS;
-	tp->pci_dev = pdev;
-	tp->board = ent->driver_data;
-	tp->mmio_addr = ioaddr;
-	spin_lock_init(&tp->lock);
-
-	pci_set_drvdata(pdev, dev);
-
-	tp->phys[0] = 32;
-
-	netdev_info(dev, "%s at %#lx, %pM IRQ %d\n",
-		    board_info[ent->driver_data].name,
-		    dev->base_addr, dev->dev_addr, dev->irq);
-
-	netdev_printk(KERN_DEBUG, dev, "Identified 8139 chip type '%s'\n",
-		      rtl_chip_info[tp->chipset].name);
-
-	/* Put the chip into low-power mode. */
-	NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
-
-	/* The lower four bits are the media type. */
-	option = (board_idx > 7) ? 0 : media[board_idx];
-	if (option > 0) {
-		tp->full_duplex = (option & 0x200) ? 1 : 0;
-		tp->default_port = option & 15;
-		if (tp->default_port)
-			tp->medialock = 1;
-	}
-
-	if (tp->full_duplex) {
-		netdev_info(dev, "Media type forced to Full Duplex\n");
-		mdio_write(dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
-		tp->duplex_lock = 1;
-	}
-
-	DPRINTK("EXIT - returning 0\n");
-	return 0;
-}
-
-
-static void __devexit netdrv_remove_one(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct netdrv_private *np;
-
-	DPRINTK("ENTER\n");
-
-	assert(dev != NULL);
-
-	np = netdev_priv(dev);
-	assert(np != NULL);
-
-	unregister_netdev(dev);
-
-#ifndef USE_IO_OPS
-	iounmap(np->mmio_addr);
-#endif /* !USE_IO_OPS */
-
-	pci_release_regions(pdev);
-
-	free_netdev(dev);
-
-	pci_set_drvdata(pdev, NULL);
-
-	pci_disable_device(pdev);
-
-	DPRINTK("EXIT\n");
-}
-
-
-/* Serial EEPROM section. */
-
-/*  EEPROM_Ctrl bits. */
-#define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
-#define EE_CS		0x08	/* EEPROM chip select. */
-#define EE_DATA_WRITE	0x02	/* EEPROM chip data in. */
-#define EE_WRITE_0	0x00
-#define EE_WRITE_1	0x02
-#define EE_DATA_READ	0x01	/* EEPROM chip data out. */
-#define EE_ENB		(0x80 | EE_CS)
-
-/* Delay between EEPROM clock transitions.
-   No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
-*/
-
-#define eeprom_delay()	readl(ee_addr)
-
-/* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD	(5)
-#define EE_READ_CMD	(6)
-#define EE_ERASE_CMD	(7)
-
-static int __devinit read_eeprom(void *ioaddr, int location, int addr_len)
-{
-	int i;
-	unsigned retval = 0;
-	void *ee_addr = ioaddr + Cfg9346;
-	int read_cmd = location | (EE_READ_CMD << addr_len);
-
-	DPRINTK("ENTER\n");
-
-	writeb(EE_ENB & ~EE_CS, ee_addr);
-	writeb(EE_ENB, ee_addr);
-	eeprom_delay();
-
-	/* Shift the read command bits out. */
-	for (i = 4 + addr_len; i >= 0; i--) {
-		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
-		writeb(EE_ENB | dataval, ee_addr);
-		eeprom_delay();
-		writeb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
-		eeprom_delay();
-	}
-	writeb(EE_ENB, ee_addr);
-	eeprom_delay();
-
-	for (i = 16; i > 0; i--) {
-		writeb(EE_ENB | EE_SHIFT_CLK, ee_addr);
-		eeprom_delay();
-		retval =
-			(retval << 1) | ((readb(ee_addr) & EE_DATA_READ) ? 1 :
-					0);
-		writeb(EE_ENB, ee_addr);
-		eeprom_delay();
-	}
-
-	/* Terminate the EEPROM access. */
-	writeb(~EE_CS, ee_addr);
-	eeprom_delay();
-
-	DPRINTK("EXIT - returning %d\n", retval);
-	return retval;
-}
-
-/* MII serial management: mostly bogus for now. */
-/* Read and write the MII management registers using software-generated
-   serial MDIO protocol.
-   The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
-   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
-   "overclocking" issues. */
-#define MDIO_DIR	0x80
-#define MDIO_DATA_OUT	0x04
-#define MDIO_DATA_IN	0x02
-#define MDIO_CLK	0x01
-#define MDIO_WRITE0	(MDIO_DIR)
-#define MDIO_WRITE1	(MDIO_DIR | MDIO_DATA_OUT)
-
-#define mdio_delay()	readb(mdio_addr)
-
-
-static char mii_2_8139_map[8] = {
-	BasicModeCtrl,
-	BasicModeStatus,
-	0,
-	0,
-	NWayAdvert,
-	NWayLPAR,
-	NWayExpansion,
-	0
-};
-
-
-/* Syncronize the MII management interface by shifting 32 one bits out. */
-static void mdio_sync(void *mdio_addr)
-{
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	for (i = 32; i >= 0; i--) {
-		writeb(MDIO_WRITE1, mdio_addr);
-		mdio_delay();
-		writeb(MDIO_WRITE1 | MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	DPRINTK("EXIT\n");
-}
-
-
-static int mdio_read(struct net_device *dev, int phy_id, int location)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *mdio_addr = tp->mmio_addr + Config4;
-	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
-	int retval = 0;
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
-		DPRINTK("EXIT after directly using 8139 internal regs\n");
-		return location < 8 && mii_2_8139_map[location] ?
-			readw(tp->mmio_addr + mii_2_8139_map[location]) : 0;
-	}
-	mdio_sync(mdio_addr);
-	/* Shift the read command bits out. */
-	for (i = 15; i >= 0; i--) {
-		int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
-
-		writeb(MDIO_DIR | dataval, mdio_addr);
-		mdio_delay();
-		writeb(MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	/* Read the two transition, 16 data, and wire-idle bits. */
-	for (i = 19; i > 0; i--) {
-		writeb(0, mdio_addr);
-		mdio_delay();
-		retval = ((retval << 1) | ((readb(mdio_addr) & MDIO_DATA_IN))
-			  ? 1 : 0);
-		writeb(MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	DPRINTK("EXIT, returning %d\n", (retval >> 1) & 0xffff);
-	return (retval >> 1) & 0xffff;
-}
-
-
-static void mdio_write(struct net_device *dev, int phy_id, int location,
-		       int value)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *mdio_addr = tp->mmio_addr + Config4;
-	int mii_cmd =
-		(0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
-		if (location < 8 && mii_2_8139_map[location]) {
-			writew(value,
-			       tp->mmio_addr + mii_2_8139_map[location]);
-			readw(tp->mmio_addr + mii_2_8139_map[location]);
-		}
-		DPRINTK("EXIT after directly using 8139 internal regs\n");
-		return;
-	}
-	mdio_sync(mdio_addr);
-
-	/* Shift the command bits out. */
-	for (i = 31; i >= 0; i--) {
-		int dataval =
-			(mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
-		writeb(dataval, mdio_addr);
-		mdio_delay();
-		writeb(dataval | MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	/* Clear out extra bits. */
-	for (i = 2; i > 0; i--) {
-		writeb(0, mdio_addr);
-		mdio_delay();
-		writeb(MDIO_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	DPRINTK("EXIT\n");
-}
-
-
-static int netdrv_open(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	int retval;
-	void *ioaddr = tp->mmio_addr;
-
-	DPRINTK("ENTER\n");
-
-	retval = request_irq(dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
-	if (retval) {
-		DPRINTK("EXIT, returning %d\n", retval);
-		return retval;
-	}
-
-	tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
-					   &tp->tx_bufs_dma);
-	tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
-					   &tp->rx_ring_dma);
-	if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
-		free_irq(dev->irq, dev);
-
-		if (tp->tx_bufs)
-			pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
-					    tp->tx_bufs, tp->tx_bufs_dma);
-		if (tp->rx_ring)
-			pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
-					    tp->rx_ring, tp->rx_ring_dma);
-
-		DPRINTK("EXIT, returning -ENOMEM\n");
-		return -ENOMEM;
-
-	}
-
-	tp->full_duplex = tp->duplex_lock;
-	tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
-
-	netdrv_init_ring(dev);
-	netdrv_hw_start(dev);
-
-	netdev_dbg(dev, "ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
-		   (unsigned long long)pci_resource_start(tp->pci_dev, 1),
-		   dev->irq, NETDRV_R8(MediaStatus),
-		   tp->full_duplex ? "full" : "half");
-
-	/* Set the timer to switch to check for link beat and perhaps switch
-	   to an alternate media type. */
-	init_timer(&tp->timer);
-	tp->timer.expires = jiffies + 3 * HZ;
-	tp->timer.data = (unsigned long) dev;
-	tp->timer.function = netdrv_timer;
-	add_timer(&tp->timer);
-
-	DPRINTK("EXIT, returning 0\n");
-	return 0;
-}
-
-
-/* Start the hardware at open or resume. */
-static void netdrv_hw_start(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	u32 i;
-
-	DPRINTK("ENTER\n");
-
-	/* Soft reset the chip. */
-	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
-	udelay(100);
-
-	/* Check that the chip has finished the reset. */
-	for (i = 1000; i > 0; i--)
-		if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
-			break;
-
-	/* Restore our idea of the MAC address. */
-	NETDRV_W32_F(MAC0 + 0, cpu_to_le32(*(u32 *)(dev->dev_addr + 0)));
-	NETDRV_W32_F(MAC0 + 4, cpu_to_le32(*(u32 *)(dev->dev_addr + 4)));
-
-	/* Must enable Tx/Rx before setting transfer thresholds! */
-	NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
-		    CmdRxEnb | CmdTxEnb);
-
-	i = netdrv_rx_config |
-		(NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
-	NETDRV_W32_F(RxConfig, i);
-
-	/* Check this value: the documentation for IFG contradicts ifself. */
-	NETDRV_W32(TxConfig, (TX_DMA_BURST << TxDMAShift));
-
-	/* unlock Config[01234] and BMCR register writes */
-	NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
-	udelay(10);
-
-	tp->cur_rx = 0;
-
-	/* Lock Config[01234] and BMCR register writes */
-	NETDRV_W8_F(Cfg9346, Cfg9346_Lock);
-	udelay(10);
-
-	/* init Rx ring buffer DMA address */
-	NETDRV_W32_F(RxBuf, tp->rx_ring_dma);
-
-	/* init Tx buffer DMA addresses */
-	for (i = 0; i < NUM_TX_DESC; i++)
-		NETDRV_W32_F(TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
-
-	NETDRV_W32_F(RxMissed, 0);
-
-	netdrv_set_rx_mode(dev);
-
-	/* no early-rx interrupts */
-	NETDRV_W16(MultiIntr, NETDRV_R16(MultiIntr) & MultiIntrClear);
-
-	/* make sure RxTx has started */
-	NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
-		    CmdRxEnb | CmdTxEnb);
-
-	/* Enable all known interrupts by setting the interrupt mask. */
-	NETDRV_W16_F(IntrMask, netdrv_intr_mask);
-
-	netif_start_queue(dev);
-
-	DPRINTK("EXIT\n");
-}
-
-
-/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void netdrv_init_ring(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	tp->cur_rx = 0;
-	atomic_set(&tp->cur_tx, 0);
-	atomic_set(&tp->dirty_tx, 0);
-
-	for (i = 0; i < NUM_TX_DESC; i++) {
-		tp->tx_info[i].skb = NULL;
-		tp->tx_info[i].mapping = 0;
-		tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
-	}
-
-	DPRINTK("EXIT\n");
-}
-
-
-static void netdrv_timer(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *) data;
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	int next_tick = 60 * HZ;
-	int mii_lpa;
-
-	mii_lpa = mdio_read(dev, tp->phys[0], MII_LPA);
-
-	if (!tp->duplex_lock && mii_lpa != 0xffff) {
-		int duplex = ((mii_lpa & LPA_100FULL) ||
-			     (mii_lpa & 0x01C0) == 0x0040);
-		if (tp->full_duplex != duplex) {
-			tp->full_duplex = duplex;
-			netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
-				    tp->full_duplex ? "full" : "half",
-				    tp->phys[0], mii_lpa);
-			NETDRV_W8(Cfg9346, Cfg9346_Unlock);
-			NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
-			NETDRV_W8(Cfg9346, Cfg9346_Lock);
-		}
-	}
-
-	netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
-		   NETDRV_R16(NWayLPAR));
-	netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x RxStatus %04lx\n",
-		   NETDRV_R16(IntrMask),
-		   NETDRV_R16(IntrStatus),
-		   NETDRV_R32(RxEarlyStatus));
-	netdev_dbg(dev, "Chip config %02x %02x\n",
-		   NETDRV_R8(Config0), NETDRV_R8(Config1));
-
-	tp->timer.expires = jiffies + next_tick;
-	add_timer(&tp->timer);
-}
-
-
-static void netdrv_tx_clear(struct net_device *dev)
-{
-	int i;
-	struct netdrv_private *tp = netdev_priv(dev);
-
-	atomic_set(&tp->cur_tx, 0);
-	atomic_set(&tp->dirty_tx, 0);
-
-	/* Dump the unsent Tx packets. */
-	for (i = 0; i < NUM_TX_DESC; i++) {
-		struct ring_info *rp = &tp->tx_info[i];
-		if (rp->mapping != 0) {
-			pci_unmap_single(tp->pci_dev, rp->mapping,
-					 rp->skb->len, PCI_DMA_TODEVICE);
-			rp->mapping = 0;
-		}
-		if (rp->skb) {
-			dev_kfree_skb(rp->skb);
-			rp->skb = NULL;
-			dev->stats.tx_dropped++;
-		}
-	}
-}
-
-
-static void netdrv_tx_timeout(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	int i;
-	u8 tmp8;
-	unsigned long flags;
-
-	netdev_dbg(dev, "Transmit timeout, status %02x %04x media %02x\n",
-		   NETDRV_R8(ChipCmd),
-		   NETDRV_R16(IntrStatus),
-		   NETDRV_R8(MediaStatus));
-
-	/* disable Tx ASAP, if not already */
-	tmp8 = NETDRV_R8(ChipCmd);
-	if (tmp8 & CmdTxEnb)
-		NETDRV_W8(ChipCmd, tmp8 & ~CmdTxEnb);
-
-	/* Disable interrupts by clearing the interrupt mask. */
-	NETDRV_W16(IntrMask, 0x0000);
-
-	/* Emit info to figure out what went wrong. */
-	netdev_dbg(dev, "Tx queue start entry %d dirty entry %d\n",
-		   atomic_read(&tp->cur_tx),
-		   atomic_read(&tp->dirty_tx));
-	for (i = 0; i < NUM_TX_DESC; i++)
-		netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
-			   i, NETDRV_R32(TxStatus0 + (i * 4)),
-			   i == atomic_read(&tp->dirty_tx) % NUM_TX_DESC ?
-			   "(queue head)" : "");
-
-	/* Stop a shared interrupt from scavenging while we are. */
-	spin_lock_irqsave(&tp->lock, flags);
-
-	netdrv_tx_clear(dev);
-
-	spin_unlock_irqrestore(&tp->lock, flags);
-
-	/* ...and finally, reset everything */
-	netdrv_hw_start(dev);
-
-	netif_wake_queue(dev);
-}
-
-
-
-static int netdrv_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	int entry;
-
-	/* Calculate the next Tx descriptor entry. */
-	entry = atomic_read(&tp->cur_tx) % NUM_TX_DESC;
-
-	assert(tp->tx_info[entry].skb == NULL);
-	assert(tp->tx_info[entry].mapping == 0);
-
-	tp->tx_info[entry].skb = skb;
-	/* tp->tx_info[entry].mapping = 0; */
-	skb_copy_from_linear_data(skb, tp->tx_buf[entry], skb->len);
-
-	/* Note: the chip doesn't have auto-pad! */
-	NETDRV_W32(TxStatus0 + (entry * sizeof(u32)),
-		   tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
-
-	atomic_inc(&tp->cur_tx);
-	if ((atomic_read(&tp->cur_tx) - atomic_read(&tp->dirty_tx)) >= NUM_TX_DESC)
-		netif_stop_queue(dev);
-
-	netdev_dbg(dev, "Queued Tx packet at %p size %u to slot %d\n",
-		   skb->data, skb->len, entry);
-
-	return NETDEV_TX_OK;
-}
-
-
-static void netdrv_tx_interrupt(struct net_device *dev,
-				struct netdrv_private *tp,
-				void *ioaddr)
-{
-	int cur_tx, dirty_tx, tx_left;
-
-	assert(dev != NULL);
-	assert(tp != NULL);
-	assert(ioaddr != NULL);
-
-	dirty_tx = atomic_read(&tp->dirty_tx);
-
-	cur_tx = atomic_read(&tp->cur_tx);
-	tx_left = cur_tx - dirty_tx;
-	while (tx_left > 0) {
-		int entry = dirty_tx % NUM_TX_DESC;
-		int txstatus;
-
-		txstatus = NETDRV_R32(TxStatus0 + (entry * sizeof(u32)));
-
-		if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
-			break;	/* It still hasn't been Txed */
-
-		/* Note: TxCarrierLost is always asserted at 100mbps. */
-		if (txstatus & (TxOutOfWindow | TxAborted)) {
-			/* There was an major error, log it. */
-			netdev_dbg(dev, "Transmit error, Tx status %#08x\n",
-				   txstatus);
-			dev->stats.tx_errors++;
-			if (txstatus & TxAborted) {
-				dev->stats.tx_aborted_errors++;
-				NETDRV_W32(TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
-			}
-			if (txstatus & TxCarrierLost)
-				dev->stats.tx_carrier_errors++;
-			if (txstatus & TxOutOfWindow)
-				dev->stats.tx_window_errors++;
-		} else {
-			if (txstatus & TxUnderrun) {
-				/* Add 64 to the Tx FIFO threshold. */
-				if (tp->tx_flag < 0x00300000)
-					tp->tx_flag += 0x00020000;
-				dev->stats.tx_fifo_errors++;
-			}
-			dev->stats.collisions += (txstatus >> 24) & 15;
-			dev->stats.tx_bytes += txstatus & 0x7ff;
-			dev->stats.tx_packets++;
-		}
-
-		/* Free the original skb. */
-		if (tp->tx_info[entry].mapping != 0) {
-			pci_unmap_single(tp->pci_dev,
-					 tp->tx_info[entry].mapping,
-					 tp->tx_info[entry].skb->len,
-					 PCI_DMA_TODEVICE);
-			tp->tx_info[entry].mapping = 0;
-		}
-		dev_kfree_skb_irq(tp->tx_info[entry].skb);
-		tp->tx_info[entry].skb = NULL;
-		dirty_tx++;
-		if (dirty_tx < 0) { /* handle signed int overflow */
-			atomic_sub(cur_tx, &tp->cur_tx); /* XXX racy? */
-			dirty_tx = cur_tx - tx_left + 1;
-		}
-		if (netif_queue_stopped(dev))
-			netif_wake_queue(dev);
-
-		cur_tx = atomic_read(&tp->cur_tx);
-		tx_left = cur_tx - dirty_tx;
-
-	}
-
-#ifndef NETDRV_NDEBUG
-	if (atomic_read(&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
-		netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d\n",
-			   dirty_tx, atomic_read(&tp->cur_tx));
-		dirty_tx += NUM_TX_DESC;
-	}
-#endif /* NETDRV_NDEBUG */
-
-	atomic_set(&tp->dirty_tx, dirty_tx);
-}
-
-
-/* TODO: clean this up!  Rx reset need not be this intensive */
-static void netdrv_rx_err(u32 rx_status, struct net_device *dev,
-			  struct netdrv_private *tp, void *ioaddr)
-{
-	u8 tmp8;
-	int tmp_work = 1000;
-
-	netdev_dbg(dev, "Ethernet frame had errors, status %08x\n", rx_status);
-	if (rx_status & RxTooLong)
-		netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
-			   rx_status);
-		/* A.C.: The chip hangs here. */
-	dev->stats.rx_errors++;
-	if (rx_status & (RxBadSymbol | RxBadAlign))
-		dev->stats.rx_frame_errors++;
-	if (rx_status & (RxRunt | RxTooLong))
-		dev->stats.rx_length_errors++;
-	if (rx_status & RxCRCErr)
-		dev->stats.rx_crc_errors++;
-	/* Reset the receiver, based on RealTek recommendation.(Bug?) */
-	tp->cur_rx = 0;
-
-	/* disable receive */
-	tmp8 = NETDRV_R8(ChipCmd) & ChipCmdClear;
-	NETDRV_W8_F(ChipCmd, tmp8 | CmdTxEnb);
-
-	/* A.C.: Reset the multicast list. */
-	netdrv_set_rx_mode(dev);
-
-	/* XXX potentially temporary hack to
-	 * restart hung receiver */
-	while (--tmp_work > 0) {
-		tmp8 = NETDRV_R8(ChipCmd);
-		if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
-			break;
-		NETDRV_W8_F(ChipCmd,
-			    (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
-	}
-
-	/* G.S.: Re-enable receiver */
-	/* XXX temporary hack to work around receiver hang */
-	netdrv_set_rx_mode(dev);
-
-	if (tmp_work <= 0)
-		netdev_warn(dev, "tx/rx enable wait too long\n");
-}
-
-
-/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the
-   field alignments and semantics. */
-static void netdrv_rx_interrupt(struct net_device *dev,
-				struct netdrv_private *tp, void *ioaddr)
-{
-	unsigned char *rx_ring;
-	u16 cur_rx;
-
-	assert(dev != NULL);
-	assert(tp != NULL);
-	assert(ioaddr != NULL);
-
-	rx_ring = tp->rx_ring;
-	cur_rx = tp->cur_rx;
-
-	netdev_dbg(dev, "In netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
-		   cur_rx, NETDRV_R16(RxBufAddr),
-		   NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
-
-	while ((NETDRV_R8(ChipCmd) & RxBufEmpty) == 0) {
-		int ring_offset = cur_rx % RX_BUF_LEN;
-		u32 rx_status;
-		unsigned int rx_size;
-		unsigned int pkt_size;
-		struct sk_buff *skb;
-
-		/* read size+status of next frame from DMA ring buffer */
-		rx_status = le32_to_cpu(*(u32 *)(rx_ring + ring_offset));
-		rx_size = rx_status >> 16;
-		pkt_size = rx_size - 4;
-
-		netdev_dbg(dev, "netdrv_rx() status %04x, size %04x, cur %04x\n",
-			   rx_status, rx_size, cur_rx);
-#if defined(NETDRV_DEBUG) && (NETDRV_DEBUG > 2)
-		print_hex_dump_bytes("Frame contents: ", HEX_DUMP_OFFSET,
-				     &rx_ring[ring_offset], 70);
-#endif
-
-		/* If Rx err or invalid rx_size/rx_status received
-		 *(which happens if we get lost in the ring),
-		 * Rx process gets reset, so we abort any further
-		 * Rx processing.
-		 */
-		if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
-		    (!(rx_status & RxStatusOK))) {
-			netdrv_rx_err(rx_status, dev, tp, ioaddr);
-			return;
-		}
-
-		/* Malloc up new buffer, compatible with net-2e. */
-		/* Omit the four octet CRC from the length. */
-
-		/* TODO: consider allocating skb's outside of
-		 * interrupt context, both to speed interrupt processing,
-		 * and also to reduce the chances of having to
-		 * drop packets here under memory pressure.
-		 */
-
-		skb = dev_alloc_skb(pkt_size + 2);
-		if (skb) {
-			skb_reserve(skb, 2);	/* 16 byte align the IP fields. */
-
-			skb_copy_to_linear_data(skb, &rx_ring[ring_offset + 4], pkt_size);
-			skb_put(skb, pkt_size);
-
-			skb->protocol = eth_type_trans(skb, dev);
-			netif_rx(skb);
-			dev->stats.rx_bytes += pkt_size;
-			dev->stats.rx_packets++;
-		} else {
-			netdev_warn(dev, "Memory squeeze, dropping packet\n");
-			dev->stats.rx_dropped++;
-		}
-
-		cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
-		NETDRV_W16_F(RxBufPtr, cur_rx - 16);
-	}
-
-	netdev_dbg(dev, "Done netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
-		   cur_rx, NETDRV_R16(RxBufAddr),
-		   NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
-
-	tp->cur_rx = cur_rx;
-}
-
-
-static void netdrv_weird_interrupt(struct net_device *dev,
-				   struct netdrv_private *tp,
-				   void *ioaddr,
-				   int status, int link_changed)
-{
-	netdev_printk(KERN_DEBUG, dev, "Abnormal interrupt, status %08x\n",
-		      status);
-
-	assert(dev != NULL);
-	assert(tp != NULL);
-	assert(ioaddr != NULL);
-
-	/* Update the error count. */
-	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
-	NETDRV_W32(RxMissed, 0);
-
-	if ((status & RxUnderrun) && link_changed &&
-	    (tp->drv_flags & HAS_LNK_CHNG)) {
-		/* Really link-change on new chips. */
-		int lpar = NETDRV_R16(NWayLPAR);
-		int duplex = ((lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 ||
-			     tp->duplex_lock);
-		if (tp->full_duplex != duplex) {
-			tp->full_duplex = duplex;
-			NETDRV_W8(Cfg9346, Cfg9346_Unlock);
-			NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
-			NETDRV_W8(Cfg9346, Cfg9346_Lock);
-		}
-		status &= ~RxUnderrun;
-	}
-
-	/* XXX along with netdrv_rx_err, are we double-counting errors? */
-	if (status & (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
-		dev->stats.rx_errors++;
-
-	if (status & (PCSTimeout))
-		dev->stats.rx_length_errors++;
-	if (status & (RxUnderrun | RxFIFOOver))
-		dev->stats.rx_fifo_errors++;
-	if (status & RxOverflow) {
-		dev->stats.rx_over_errors++;
-		tp->cur_rx = NETDRV_R16(RxBufAddr) % RX_BUF_LEN;
-		NETDRV_W16_F(RxBufPtr, tp->cur_rx - 16);
-	}
-	if (status & PCIErr) {
-		u16 pci_cmd_status;
-		pci_read_config_word(tp->pci_dev, PCI_STATUS, &pci_cmd_status);
-
-		netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
-	}
-}
-
-
-/* The interrupt handler does all of the Rx thread work and cleans up
-   after the Tx thread. */
-static irqreturn_t netdrv_interrupt(int irq, void *dev_instance)
-{
-	struct net_device *dev = (struct net_device *) dev_instance;
-	struct netdrv_private *tp = netdev_priv(dev);
-	int boguscnt = max_interrupt_work;
-	void *ioaddr = tp->mmio_addr;
-	int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */
-	int handled = 0;
-
-	spin_lock(&tp->lock);
-
-	do {
-		status = NETDRV_R16(IntrStatus);
-
-		/* h/w no longer present(hotplug?) or major error, bail */
-		if (status == 0xFFFF)
-			break;
-
-		handled = 1;
-		/* Acknowledge all of the current interrupt sources ASAP */
-		NETDRV_W16_F(IntrStatus, status);
-
-		netdev_dbg(dev, "interrupt  status=%#04x new intstat=%#04x\n",
-			   status, NETDRV_R16(IntrStatus));
-
-		if ((status &
-		     (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
-		      RxFIFOOver | TxErr | TxOK | RxErr | RxOK)) == 0)
-			break;
-
-		/* Check uncommon events with one test. */
-		if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
-			     RxFIFOOver | TxErr | RxErr))
-			netdrv_weird_interrupt(dev, tp, ioaddr,
-					       status, link_changed);
-
-		if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver))	/* Rx interrupt */
-			netdrv_rx_interrupt(dev, tp, ioaddr);
-
-		if (status & (TxOK | TxErr))
-			netdrv_tx_interrupt(dev, tp, ioaddr);
-
-		boguscnt--;
-	} while (boguscnt > 0);
-
-	if (boguscnt <= 0) {
-		netdev_warn(dev, "Too much work at interrupt, IntrStatus=%#04x\n",
-			    status);
-
-		/* Clear all interrupt sources. */
-		NETDRV_W16(IntrStatus, 0xffff);
-	}
-
-	spin_unlock(&tp->lock);
-
-	netdev_dbg(dev, "exiting interrupt, intr_status=%#04x\n",
-		   NETDRV_R16(IntrStatus));
-	return IRQ_RETVAL(handled);
-}
-
-
-static int netdrv_close(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	unsigned long flags;
-
-	DPRINTK("ENTER\n");
-
-	netif_stop_queue(dev);
-
-	netdev_dbg(dev, "Shutting down ethercard, status was %#04x\n",
-		   NETDRV_R16(IntrStatus));
-
-	del_timer_sync(&tp->timer);
-
-	spin_lock_irqsave(&tp->lock, flags);
-
-	/* Stop the chip's Tx and Rx DMA processes. */
-	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
-
-	/* Disable interrupts by clearing the interrupt mask. */
-	NETDRV_W16(IntrMask, 0x0000);
-
-	/* Update the error counts. */
-	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
-	NETDRV_W32(RxMissed, 0);
-
-	spin_unlock_irqrestore(&tp->lock, flags);
-
-	free_irq(dev->irq, dev);
-
-	netdrv_tx_clear(dev);
-
-	pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
-			    tp->rx_ring, tp->rx_ring_dma);
-	pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
-			    tp->tx_bufs, tp->tx_bufs_dma);
-	tp->rx_ring = NULL;
-	tp->tx_bufs = NULL;
-
-	/* Green! Put the chip in low-power mode. */
-	NETDRV_W8(Cfg9346, Cfg9346_Unlock);
-	NETDRV_W8(Config1, 0x03);
-	NETDRV_W8(Cfg9346, Cfg9346_Lock);
-
-	DPRINTK("EXIT\n");
-	return 0;
-}
-
-
-static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	struct mii_ioctl_data *data = if_mii(rq);
-	unsigned long flags;
-	int rc = 0;
-
-	DPRINTK("ENTER\n");
-
-	switch (cmd) {
-	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
-		data->phy_id = tp->phys[0] & 0x3f;
-		/* Fall Through */
-
-	case SIOCGMIIREG:		/* Read MII PHY register. */
-		spin_lock_irqsave(&tp->lock, flags);
-		data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
-		spin_unlock_irqrestore(&tp->lock, flags);
-		break;
-
-	case SIOCSMIIREG:		/* Write MII PHY register. */
-		spin_lock_irqsave(&tp->lock, flags);
-		mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
-		spin_unlock_irqrestore(&tp->lock, flags);
-		break;
-
-	default:
-		rc = -EOPNOTSUPP;
-		break;
-	}
-
-	DPRINTK("EXIT, returning %d\n", rc);
-	return rc;
-}
-
-/* Set or clear the multicast filter for this adaptor.
-   This routine is not state sensitive and need not be SMP locked. */
-
-static void netdrv_set_rx_mode(struct net_device *dev)
-{
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	u32 mc_filter[2];	/* Multicast hash filter */
-	int rx_mode;
-	u32 tmp;
-
-	DPRINTK("ENTER\n");
-
-	netdev_dbg(dev, "%s(%04x) done -- Rx config %08lx\n",
-		   __func__, dev->flags, NETDRV_R32(RxConfig));
-
-	/* Note: do not reorder, GCC is clever about common statements. */
-	if (dev->flags & IFF_PROMISC) {
-		rx_mode =
-			AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
-			AcceptAllPhys;
-		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
-		   (dev->flags & IFF_ALLMULTI)) {
-		/* Too many to filter perfectly -- accept all multicasts. */
-		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
-		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else {
-		struct netdev_hw_addr *ha;
-
-		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
-		mc_filter[1] = mc_filter[0] = 0;
-		netdev_for_each_mc_addr(ha, dev) {
-			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
-
-			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
-		}
-	}
-
-	/* if called from irq handler, lock already acquired */
-	if (!in_irq())
-		spin_lock_irq(&tp->lock);
-
-	/* We can safely update without stopping the chip. */
-	tmp = netdrv_rx_config | rx_mode |
-		(NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
-	NETDRV_W32_F(RxConfig, tmp);
-	NETDRV_W32_F(MAR0 + 0, mc_filter[0]);
-	NETDRV_W32_F(MAR0 + 4, mc_filter[1]);
-
-	if (!in_irq())
-		spin_unlock_irq(&tp->lock);
-
-	DPRINTK("EXIT\n");
-}
-
-
-#ifdef CONFIG_PM
-
-static int netdrv_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct netdrv_private *tp = netdev_priv(dev);
-	void *ioaddr = tp->mmio_addr;
-	unsigned long flags;
-
-	if (!netif_running(dev))
-		return 0;
-	netif_device_detach(dev);
-
-	spin_lock_irqsave(&tp->lock, flags);
-
-	/* Disable interrupts, stop Tx and Rx. */
-	NETDRV_W16(IntrMask, 0x0000);
-	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
-
-	/* Update the error counts. */
-	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
-	NETDRV_W32(RxMissed, 0);
-
-	spin_unlock_irqrestore(&tp->lock, flags);
-
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	return 0;
-}
-
-
-static int netdrv_resume(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	/*struct netdrv_private *tp = netdev_priv(dev);*/
-
-	if (!netif_running(dev))
-		return 0;
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	netif_device_attach(dev);
-	netdrv_hw_start(dev);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-
-static struct pci_driver netdrv_pci_driver = {
-	.name		= MODNAME,
-	.id_table	= netdrv_pci_tbl,
-	.probe		= netdrv_init_one,
-	.remove		= __devexit_p(netdrv_remove_one),
-#ifdef CONFIG_PM
-	.suspend	= netdrv_suspend,
-	.resume		= netdrv_resume,
-#endif /* CONFIG_PM */
-};
-
-
-static int __init netdrv_init_module(void)
-{
-/* when a module, this is printed whether or not devices are found in probe */
-#ifdef MODULE
-	printk(version);
-#endif
-	return pci_register_driver(&netdrv_pci_driver);
-}
-
-
-static void __exit netdrv_cleanup_module(void)
-{
-	pci_unregister_driver(&netdrv_pci_driver);
-}
-
-
-module_init(netdrv_init_module);
-module_exit(netdrv_cleanup_module);
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
deleted file mode 100644
index 9b8f793b1cc8..000000000000
--- a/drivers/net/pcmcia/Kconfig
+++ /dev/null
@@ -1,123 +0,0 @@
-#
-# PCMCIA Network device configuration
-#
-
-menuconfig NET_PCMCIA
-	bool "PCMCIA network device support"
-	depends on PCMCIA
-	---help---
-	  Say Y if you would like to include support for any PCMCIA or CardBus
-	  network adapters, then say Y to the driver for your particular card
-	  below.  PCMCIA- or PC-cards are credit-card size devices often used
-	  with laptops computers; CardBus is the newer and faster version of
-	  PCMCIA.
-
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  You also want to check out the PCMCIA-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  If unsure, say N.
-
-if NET_PCMCIA && PCMCIA
-
-config PCMCIA_3C589
-	tristate "3Com 3c589 PCMCIA support"
-	help
-	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
-	  (PC-card) Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called 3c589_cs.  If unsure, say N.
-
-config PCMCIA_3C574
-	tristate "3Com 3c574 PCMCIA support"
-	help
-	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
-	  (PC-card) Fast Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called 3c574_cs.  If unsure, say N.
-
-config PCMCIA_FMVJ18X
-	tristate "Fujitsu FMV-J18x PCMCIA support"
-	select CRC32
-	help
-	  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
-	  PCMCIA (PC-card) Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called fmvj18x_cs.  If unsure, say N.
-
-config PCMCIA_PCNET
-	tristate "NE2000 compatible PCMCIA support"
-	select CRC32
-	help
-	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
-	  (PC-card) Ethernet or Fast Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called pcnet_cs.  If unsure, say N.
-
-config PCMCIA_NMCLAN
-	tristate "New Media PCMCIA support"
-	help
-	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
-	  PCMCIA (PC-card) Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called nmclan_cs.  If unsure, say N.
-
-config PCMCIA_SMC91C92
-	tristate "SMC 91Cxx PCMCIA support"
-	select CRC32
-	select MII
-	help
-	  Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
-	  (PC-card) Ethernet or Fast Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called smc91c92_cs.  If unsure, say N.
-
-config PCMCIA_XIRC2PS
-	tristate "Xircom 16-bit PCMCIA support"
-	help
-	  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
-	  Ethernet or Fast Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called xirc2ps_cs.  If unsure, say N.
-
-config PCMCIA_AXNET
-	tristate "Asix AX88190 PCMCIA support"
-	---help---
-	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
-	  (PC-card) Fast Ethernet card to your computer.  These cards are
-	  nearly NE2000 compatible but need a separate driver due to a few
-	  misfeatures.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called axnet_cs.  If unsure, say N.
-
-config ARCNET_COM20020_CS
-	tristate "COM20020 ARCnet PCMCIA support"
-	depends on ARCNET_COM20020
-	help
-	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
-	  to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called com20020_cs.  If unsure, say N.
-
-config PCMCIA_IBMTR
-	tristate "IBM PCMCIA tokenring adapter support"
-	depends on IBMTR!=y && TR
-	help
-	  Say Y here if you intend to attach this type of Token Ring PCMCIA
-	  card to your computer. You then also need to say Y to "Token Ring
-	  driver support".
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ibmtr_cs.
-
-endif # NET_PCMCIA
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
deleted file mode 100644
index 87d2d99f4c14..000000000000
--- a/drivers/net/pcmcia/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Makefile for the Linux PCMCIA network device drivers.
-#
-
-# 16-bit client drivers
-obj-$(CONFIG_PCMCIA_3C589)	+= 3c589_cs.o
-obj-$(CONFIG_PCMCIA_3C574)	+= 3c574_cs.o
-obj-$(CONFIG_PCMCIA_FMVJ18X)	+= fmvj18x_cs.o
-obj-$(CONFIG_PCMCIA_NMCLAN)	+= nmclan_cs.o
-obj-$(CONFIG_PCMCIA_PCNET)	+= pcnet_cs.o
-obj-$(CONFIG_PCMCIA_SMC91C92)	+= smc91c92_cs.o
-obj-$(CONFIG_PCMCIA_XIRC2PS)	+= xirc2ps_cs.o
-obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
-obj-$(CONFIG_PCMCIA_AXNET)	+= axnet_cs.o
-
-obj-$(CONFIG_PCMCIA_IBMTR)	+= ibmtr_cs.o
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index a70244306c94..bb88e12101c7 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig PHYLIB
-	tristate "PHY Device support and infrastructure"
+	bool "PHY Device support and infrastructure"
 	depends on !S390
 	depends on NETDEVICES
 	help
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 2cd8dc5847b4..cb6e0b486b1e 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -34,8 +34,7 @@
 #define PAGESEL		0x13
 #define LAYER4		0x02
 #define LAYER2		0x01
-#define MAX_RXTS	4
-#define MAX_TXTS	4
+#define MAX_RXTS	64
 #define N_EXT_TS	1
 #define PSF_PTPVER	2
 #define PSF_EVNT	0x4000
@@ -218,7 +217,7 @@ static void phy2rxts(struct phy_rxts *p, struct rxts *rxts)
 	rxts->seqid = p->seqid;
 	rxts->msgtype = (p->msgtype >> 12) & 0xf;
 	rxts->hash = p->msgtype & 0x0fff;
-	rxts->tmo = jiffies + HZ;
+	rxts->tmo = jiffies + 2;
 }
 
 static u64 phy2txts(struct phy_txts *p)
diff --git a/drivers/net/plip/Kconfig b/drivers/net/plip/Kconfig
new file mode 100644
index 000000000000..80c4a3373e51
--- /dev/null
+++ b/drivers/net/plip/Kconfig
@@ -0,0 +1,38 @@
+#
+# Parallel Line Internet Protocol (PLIP) network device configuration
+#
+
+config PLIP
+	tristate "PLIP (parallel port) support"
+	depends on PARPORT
+	---help---
+	  PLIP (Parallel Line Internet Protocol) is used to create a
+	  reasonably fast mini network consisting of two (or, rarely, more)
+	  local machines.  A PLIP link from a Linux box is a popular means to
+	  install a Linux distribution on a machine which doesn't have a
+	  CD-ROM drive (a minimal system has to be transferred with floppies
+	  first). The kernels on both machines need to have this PLIP option
+	  enabled for this to work.
+
+	  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
+	  ports (the connectors at the computers with 25 holes) are connected
+	  with "null printer" or "Turbo Laplink" cables which can transmit 4
+	  bits at a time (mode 0) or with special PLIP cables, to be used on
+	  bidirectional parallel ports only, which can transmit 8 bits at a
+	  time (mode 1); you can find the wiring of these cables in
+	  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
+	  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
+	  and has some PLIP software installed, e.g. the Crynwr PLIP packet
+	  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+	  and winsock or NCSA's telnet.
+
+	  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+	  as the NET-3-HOWTO, both available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
+	  protocol has been changed and this PLIP driver won't work together
+	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
+	  your kernel by about 8 KB.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called plip. If unsure, say Y or M, in case you buy
+	  a laptop later.
diff --git a/drivers/net/plip/Makefile b/drivers/net/plip/Makefile
new file mode 100644
index 000000000000..ed958796dc64
--- /dev/null
+++ b/drivers/net/plip/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the PLIP network device drivers.
+#
+
+obj-$(CONFIG_PLIP) += plip.o
diff --git a/drivers/net/plip.c b/drivers/net/plip/plip.c
index a9e9ca8a86ed..a9e9ca8a86ed 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip/plip.c
diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig
new file mode 100644
index 000000000000..872df3ef07a6
--- /dev/null
+++ b/drivers/net/ppp/Kconfig
@@ -0,0 +1,175 @@
+#
+# PPP network device configuration
+#
+
+config PPP
+	tristate "PPP (point-to-point protocol) support"
+	select SLHC
+	---help---
+	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
+	  the same purpose: sending Internet traffic over telephone (and other
+	  serial) lines.  Ask your access provider if they support it, because
+	  otherwise you can't use it; most Internet access providers these
+	  days support PPP rather than SLIP.
+
+	  To use PPP, you need an additional program called pppd as described
+	  in the PPP-HOWTO, available at
+	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
+	  the version of pppd recommended in <file:Documentation/Changes>.
+	  The PPP option enlarges your kernel by about 16 KB.
+
+	  There are actually two versions of PPP: the traditional PPP for
+	  asynchronous lines, such as regular analog phone lines, and
+	  synchronous PPP which can be used over digital ISDN lines for
+	  example.  If you want to use PPP over phone lines or other
+	  asynchronous serial lines, you need to say Y (or M) here and also to
+	  the next option, "PPP support for async serial ports".  For PPP over
+	  synchronous lines, you should say Y (or M) here and to "Support
+	  synchronous PPP", below.
+
+	  If you said Y to "Version information on all symbols" above, then
+	  you cannot compile the PPP driver into the kernel; you can then only
+	  compile it as a module. To compile this driver as a module, choose M
+	  here. The module will be called ppp_generic.
+
+if PPP
+
+config PPP_BSDCOMP
+	tristate "PPP BSD-Compress compression"
+	depends on PPP
+	---help---
+	  Support for the BSD-Compress compression method for PPP, which uses
+	  the LZW compression method to compress each PPP packet before it is
+	  sent over the wire. The machine at the other end of the PPP link
+	  (usually your ISP) has to support the BSD-Compress compression
+	  method as well for this to be useful. Even if they don't support it,
+	  it is safe to say Y here.
+
+	  The PPP Deflate compression method ("PPP Deflate compression",
+	  above) is preferable to BSD-Compress, because it compresses better
+	  and is patent-free.
+
+	  Note that the BSD compression code will always be compiled as a
+	  module; it is called bsd_comp and will show up in the directory
+	  modules once you have said "make modules". If unsure, say N.
+
+config PPP_DEFLATE
+	tristate "PPP Deflate compression"
+	depends on PPP
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	---help---
+	  Support for the Deflate compression method for PPP, which uses the
+	  Deflate algorithm (the same algorithm that gzip uses) to compress
+	  each PPP packet before it is sent over the wire.  The machine at the
+	  other end of the PPP link (usually your ISP) has to support the
+	  Deflate compression method as well for this to be useful.  Even if
+	  they don't support it, it is safe to say Y here.
+
+	  To compile this driver as a module, choose M here.
+
+config PPP_FILTER
+	bool "PPP filtering"
+	depends on PPP
+	---help---
+	  Say Y here if you want to be able to filter the packets passing over
+	  PPP interfaces.  This allows you to control which packets count as
+	  activity (i.e. which packets will reset the idle timer or bring up
+	  a demand-dialed link) and which packets are to be dropped entirely.
+	  You need to say Y here if you wish to use the pass-filter and
+	  active-filter options to pppd.
+
+	  If unsure, say N.
+
+config PPP_MPPE
+	tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
+	depends on PPP && EXPERIMENTAL
+	select CRYPTO
+	select CRYPTO_SHA1
+	select CRYPTO_ARC4
+	select CRYPTO_ECB
+	---help---
+	  Support for the MPPE Encryption protocol, as employed by the
+	  Microsoft Point-to-Point Tunneling Protocol.
+
+	  See http://pptpclient.sourceforge.net/ for information on
+	  configuring PPTP clients and servers to utilize this method.
+
+config PPP_MULTILINK
+	bool "PPP multilink support (EXPERIMENTAL)"
+	depends on PPP && EXPERIMENTAL
+	---help---
+	  PPP multilink is a protocol (defined in RFC 1990) which allows you
+	  to combine several (logical or physical) lines into one logical PPP
+	  connection, so that you can utilize your full bandwidth.
+
+	  This has to be supported at the other end as well and you need a
+	  version of the pppd daemon which understands the multilink protocol.
+
+	  If unsure, say N.
+
+config PPPOATM
+	tristate "PPP over ATM"
+	depends on ATM && PPP
+	---help---
+	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
+	  This implementation does not yet comply with section 8 of RFC2364,
+	  which can lead to bad results if the ATM peer loses state and
+	  changes its encapsulation unilaterally.
+
+config PPPOE
+	tristate "PPP over Ethernet (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && PPP
+	---help---
+	  Support for PPP over Ethernet.
+
+	  This driver requires the latest version of pppd from the CVS
+	  repository at cvs.samba.org.  Alternatively, see the
+	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
+	  which contains instruction on how to use this driver (under
+	  the heading "Kernel mode PPPoE").
+
+config PPTP
+	tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
+	---help---
+	  Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
+
+	  This driver requires pppd plugin to work in client mode or
+	  modified pptpd (poptop) to work in server mode.
+	  See http://accel-pptp.sourceforge.net/ for information how to
+	  utilize this module.
+
+config PPPOL2TP
+	tristate "PPP over L2TP (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && L2TP && PPP
+	---help---
+	  Support for PPP-over-L2TP socket family. L2TP is a protocol
+	  used by ISPs and enterprises to tunnel PPP traffic over UDP
+	  tunnels. L2TP is replacing PPTP for VPN uses.
+
+config PPP_ASYNC
+	tristate "PPP support for async serial ports"
+	depends on PPP
+	select CRC_CCITT
+	---help---
+	  Say Y (or M) here if you want to be able to use PPP over standard
+	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
+	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
+	  need this option.
+
+	  To compile this driver as a module, choose M here.
+
+	  If unsure, say Y.
+
+config PPP_SYNC_TTY
+	tristate "PPP support for sync tty ports"
+	depends on PPP
+	---help---
+	  Say Y (or M) here if you want to be able to use PPP over synchronous
+	  (HDLC) tty devices, such as the SyncLink adapter. These devices
+	  are often used for high-speed leased lines like T1/E1.
+
+	  To compile this driver as a module, choose M here.
+
+endif # PPP
diff --git a/drivers/net/ppp/Makefile b/drivers/net/ppp/Makefile
new file mode 100644
index 000000000000..a6b6297b0066
--- /dev/null
+++ b/drivers/net/ppp/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the Linux PPP network device drivers.
+#
+
+obj-$(CONFIG_PPP) += ppp_generic.o
+obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
+obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
+obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
+obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
+obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
+obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
+obj-$(CONFIG_PPPOL2TP) += pppox.o
+obj-$(CONFIG_PPTP) += pppox.o pptp.o
diff --git a/drivers/net/bsd_comp.c b/drivers/net/ppp/bsd_comp.c
index a9b759add187..a9b759add187 100644
--- a/drivers/net/bsd_comp.c
+++ b/drivers/net/ppp/bsd_comp.c
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp/ppp_async.c
index c6ba64380829..c6ba64380829 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp/ppp_async.c
diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp/ppp_deflate.c
index 1dbdf82a6dfd..1dbdf82a6dfd 100644
--- a/drivers/net/ppp_deflate.c
+++ b/drivers/net/ppp/ppp_deflate.c
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 10e5d985afa3..10e5d985afa3 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
index 9a1849a83e2a..9a1849a83e2a 100644
--- a/drivers/net/ppp_mppe.c
+++ b/drivers/net/ppp/ppp_mppe.c
diff --git a/drivers/net/ppp_mppe.h b/drivers/net/ppp/ppp_mppe.h
index 7a14e058c668..7a14e058c668 100644
--- a/drivers/net/ppp_mppe.h
+++ b/drivers/net/ppp/ppp_mppe.h
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c
index 736a39ee05bb..736a39ee05bb 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp/ppp_synctty.c
diff --git a/drivers/net/pppoe.c b/drivers/net/ppp/pppoe.c
index bc9a4bb31980..bc9a4bb31980 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
diff --git a/drivers/net/pppox.c b/drivers/net/ppp/pppox.c
index 8c0d170dabcd..8c0d170dabcd 100644
--- a/drivers/net/pppox.c
+++ b/drivers/net/ppp/pppox.c
diff --git a/drivers/net/pptp.c b/drivers/net/ppp/pptp.c
index eae542a7e987..eae542a7e987 100644
--- a/drivers/net/pptp.c
+++ b/drivers/net/ppp/pptp.c
diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig
new file mode 100644
index 000000000000..211b160e4e9c
--- /dev/null
+++ b/drivers/net/slip/Kconfig
@@ -0,0 +1,79 @@
+#
+# SLIP network device configuration
+#
+
+config SLIP
+	tristate "SLIP (serial line) support"
+	---help---
+	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
+	  connect to your Internet service provider or to connect to some
+	  other local Unix box or if you want to configure your Linux box as a
+	  Slip/CSlip server for other people to dial in. SLIP (Serial Line
+	  Internet Protocol) is a protocol used to send Internet traffic over
+	  serial connections such as telephone lines or null modem cables;
+	  nowadays, the protocol PPP is more commonly used for this same
+	  purpose.
+
+	  Normally, your access provider has to support SLIP in order for you
+	  to be able to use it, but there is now a SLIP emulator called SLiRP
+	  around (available from
+	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+	  allows you to use SLIP over a regular dial up shell connection. If
+	  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
+	  NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, explains how to
+	  configure SLIP. Note that you don't need this option if you just
+	  want to run term (term is a program which gives you almost full
+	  Internet connectivity if you have a regular dial up shell account on
+	  some Internet connected Unix computer. Read
+	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
+	  support will enlarge your kernel by about 4 KB. If unsure, say N.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called slip.
+
+config SLHC
+	tristate
+	---help---
+	  This option enables Van Jacobsen serial line header compression
+	  routines.
+
+if SLIP
+
+config SLIP_COMPRESSED
+	bool "CSLIP compressed headers"
+	depends on SLIP
+	select SLHC
+	---help---
+	  This protocol is faster than SLIP because it uses compression on the
+	  TCP/IP headers (not on the data itself), but it has to be supported
+	  on both ends. Ask your access provider if you are not sure and
+	  answer Y, just in case. You will still be able to use plain SLIP. If
+	  you plan to use SLiRP, the SLIP emulator (available from
+	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+	  allows you to use SLIP over a regular dial up shell connection, you
+	  definitely want to say Y here. The NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, explains how to configure
+	  CSLIP. This won't enlarge your kernel.
+
+config SLIP_SMART
+	bool "Keepalive and linefill"
+	depends on SLIP
+	---help---
+	  Adds additional capabilities to the SLIP driver to support the
+	  RELCOM line fill and keepalive monitoring. Ideal on poor quality
+	  analogue lines.
+
+config SLIP_MODE_SLIP6
+	bool "Six bit SLIP encapsulation"
+	depends on SLIP
+	---help---
+	  Just occasionally you may need to run IP over hostile serial
+	  networks that don't pass all control characters or are only seven
+	  bit. Saying Y here adds an extra mode you can use with SLIP:
+	  "slip6". In this mode, SLIP will only send normal ASCII symbols over
+	  the serial device. Naturally, this has to be supported at the other
+	  end of the link as well. It's good enough, for example, to run IP
+	  over the async ports of a Camtec JNT Pad. If unsure, say N.
+
+endif # SLIP
diff --git a/drivers/net/slip/Makefile b/drivers/net/slip/Makefile
new file mode 100644
index 000000000000..e3ebc59e6fb9
--- /dev/null
+++ b/drivers/net/slip/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the SLIP network device drivers.
+#
+
+obj-$(CONFIG_SLIP) += slip.o
+obj-$(CONFIG_SLHC) += slhc.o
diff --git a/drivers/net/slhc.c b/drivers/net/slip/slhc.c
index 0a0a6643cf3a..0a0a6643cf3a 100644
--- a/drivers/net/slhc.c
+++ b/drivers/net/slip/slhc.c
diff --git a/drivers/net/slip.c b/drivers/net/slip/slip.c
index f11b3f3df24f..ba08341fb92c 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip/slip.c
@@ -367,7 +367,7 @@ static void sl_bump(struct slip *sl)
 	memcpy(skb_put(skb, count), sl->rbuff, count);
 	skb_reset_mac_header(skb);
 	skb->protocol = htons(ETH_P_IP);
-	netif_rx(skb);
+	netif_rx_ni(skb);
 	dev->stats.rx_packets++;
 }
 
@@ -562,34 +562,33 @@ static struct rtnl_link_stats64 *
 sl_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 {
 	struct net_device_stats *devstats = &dev->stats;
-	unsigned long c_rx_dropped = 0;
 #ifdef SL_INCLUDE_CSLIP
-	unsigned long c_rx_fifo_errors = 0;
-	unsigned long c_tx_fifo_errors = 0;
-	unsigned long c_collisions = 0;
 	struct slip *sl = netdev_priv(dev);
 	struct slcompress *comp = sl->slcomp;
-
-	if (comp) {
-		c_rx_fifo_errors = comp->sls_i_compressed;
-		c_rx_dropped     = comp->sls_i_tossed;
-		c_tx_fifo_errors = comp->sls_o_compressed;
-		c_collisions     = comp->sls_o_misses;
-	}
-	stats->rx_fifo_errors = sl->rx_compressed + c_rx_fifo_errors;
-	stats->tx_fifo_errors = sl->tx_compressed + c_tx_fifo_errors;
-	stats->collisions     = sl->tx_misses + c_collisions;
 #endif
 	stats->rx_packets     = devstats->rx_packets;
 	stats->tx_packets     = devstats->tx_packets;
 	stats->rx_bytes       = devstats->rx_bytes;
 	stats->tx_bytes       = devstats->tx_bytes;
-	stats->rx_dropped     = devstats->rx_dropped + c_rx_dropped;
+	stats->rx_dropped     = devstats->rx_dropped;
 	stats->tx_dropped     = devstats->tx_dropped;
 	stats->tx_errors      = devstats->tx_errors;
 	stats->rx_errors      = devstats->rx_errors;
 	stats->rx_over_errors = devstats->rx_over_errors;
 
+#ifdef SL_INCLUDE_CSLIP
+	if (comp) {
+		/* Generic compressed statistics */
+		stats->rx_compressed   = comp->sls_i_compressed;
+		stats->tx_compressed   = comp->sls_o_compressed;
+
+		/* Are we really still needs this? */
+		stats->rx_fifo_errors += comp->sls_i_compressed;
+		stats->rx_dropped     += comp->sls_i_tossed;
+		stats->tx_fifo_errors += comp->sls_o_compressed;
+		stats->collisions     += comp->sls_o_misses;
+	}
+#endif
 	return stats;
 }
 
diff --git a/drivers/net/slip.h b/drivers/net/slip/slip.h
index aa0764ce2342..67673cf1266b 100644
--- a/drivers/net/slip.h
+++ b/drivers/net/slip/slip.h
@@ -65,15 +65,6 @@ struct slip {
   unsigned char		*xbuff;		/* transmitter buffer		*/
   unsigned char         *xhead;         /* pointer to next byte to XMIT */
   int                   xleft;          /* bytes left in XMIT queue     */
-
-  /* SLIP interface statistics. */
-#ifdef SL_INCLUDE_CSLIP
-  unsigned long		tx_compressed;
-  unsigned long		rx_compressed;
-  unsigned long		tx_misses;
-#endif
-  /* Detailed SLIP statistics. */
-
   int			mtu;		/* Our mtu (to spot changes!)   */
   int                   buffsize;       /* Max buffers sizes            */
 
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index d16880d7099b..58f13adaa549 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -33,7 +33,7 @@
 #include <asm/prom.h>
 #endif
 
-#include "sungem_phy.h"
+#include <linux/sungem_phy.h>
 
 /* Link modes of the BCM5400 PHY */
 static const int phy_BCM5400_link_table[8][3] = {
@@ -1156,7 +1156,7 @@ static struct mii_phy_def* mii_phy_table[] = {
 	NULL
 };
 
-int mii_phy_probe(struct mii_phy *phy, int mii_id)
+int sungem_phy_probe(struct mii_phy *phy, int mii_id)
 {
 	int rc;
 	u32 id;
@@ -1195,6 +1195,5 @@ fail:
 	return -ENODEV;
 }
 
-EXPORT_SYMBOL(mii_phy_probe);
+EXPORT_SYMBOL(sungem_phy_probe);
 MODULE_LICENSE("GPL");
-
diff --git a/drivers/net/sungem_phy.h b/drivers/net/sungem_phy.h
deleted file mode 100644
index af02f9479cbb..000000000000
--- a/drivers/net/sungem_phy.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef __SUNGEM_PHY_H__
-#define __SUNGEM_PHY_H__
-
-struct mii_phy;
-
-/* Operations supported by any kind of PHY */
-struct mii_phy_ops
-{
-	int		(*init)(struct mii_phy *phy);
-	int		(*suspend)(struct mii_phy *phy);
-	int		(*setup_aneg)(struct mii_phy *phy, u32 advertise);
-	int		(*setup_forced)(struct mii_phy *phy, int speed, int fd);
-	int		(*poll_link)(struct mii_phy *phy);
-	int		(*read_link)(struct mii_phy *phy);
-	int		(*enable_fiber)(struct mii_phy *phy, int autoneg);
-};
-
-/* Structure used to statically define an mii/gii based PHY */
-struct mii_phy_def
-{
-	u32				phy_id;		/* Concatenated ID1 << 16 | ID2 */
-	u32				phy_id_mask;	/* Significant bits */
-	u32				features;	/* Ethtool SUPPORTED_* defines */
-	int				magic_aneg;	/* Autoneg does all speed test for us */
-	const char*			name;
-	const struct mii_phy_ops*	ops;
-};
-
-enum {
-	BCM54XX_COPPER,
-	BCM54XX_FIBER,
-	BCM54XX_GBIC,
-	BCM54XX_SGMII,
-	BCM54XX_UNKNOWN,
-};
-
-/* An instance of a PHY, partially borrowed from mii_if_info */
-struct mii_phy
-{
-	struct mii_phy_def*	def;
-	u32			advertising;
-	int			mii_id;
-
-	/* 1: autoneg enabled, 0: disabled */
-	int			autoneg;
-
-	/* forced speed & duplex (no autoneg)
-	 * partner speed & duplex & pause (autoneg)
-	 */
-	int			speed;
-	int			duplex;
-	int			pause;
-
-	/* Provided by host chip */
-	struct net_device	*dev;
-	int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
-	void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
-	void			*platform_data;
-};
-
-/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
- * filled, the remaining fields will be filled on return
- */
-extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
-
-
-/* MII definitions missing from mii.h */
-
-#define BMCR_SPD2	0x0040		/* Gigabit enable (bcm54xx)	*/
-#define LPA_PAUSE	0x0400
-
-/* More PHY registers (model specific) */
-
-/* MII BCM5201 MULTIPHY interrupt register */
-#define MII_BCM5201_INTERRUPT			0x1A
-#define MII_BCM5201_INTERRUPT_INTENABLE		0x4000
-
-#define MII_BCM5201_AUXMODE2			0x1B
-#define MII_BCM5201_AUXMODE2_LOWPOWER		0x0008
-
-#define MII_BCM5201_MULTIPHY                    0x1E
-
-/* MII BCM5201 MULTIPHY register bits */
-#define MII_BCM5201_MULTIPHY_SERIALMODE         0x0002
-#define MII_BCM5201_MULTIPHY_SUPERISOLATE       0x0008
-
-/* MII BCM5221 Additional registers */
-#define MII_BCM5221_TEST			0x1f
-#define MII_BCM5221_TEST_ENABLE_SHADOWS		0x0080
-#define MII_BCM5221_SHDOW_AUX_STAT2		0x1b
-#define MII_BCM5221_SHDOW_AUX_STAT2_APD		0x0020
-#define MII_BCM5221_SHDOW_AUX_MODE4		0x1a
-#define MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE	0x0001
-#define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR	0x0004
-
-/* MII BCM5241 Additional registers */
-#define MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR	0x0008
-
-/* MII BCM5400 1000-BASET Control register */
-#define MII_BCM5400_GB_CONTROL			0x09
-#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP	0x0200
-
-/* MII BCM5400 AUXCONTROL register */
-#define MII_BCM5400_AUXCONTROL                  0x18
-#define MII_BCM5400_AUXCONTROL_PWR10BASET       0x0004
-
-/* MII BCM5400 AUXSTATUS register */
-#define MII_BCM5400_AUXSTATUS                   0x19
-#define MII_BCM5400_AUXSTATUS_LINKMODE_MASK     0x0700
-#define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT    8
-
-/* 1000BT control (Marvell & BCM54xx at least) */
-#define MII_1000BASETCONTROL			0x09
-#define MII_1000BASETCONTROL_FULLDUPLEXCAP	0x0200
-#define MII_1000BASETCONTROL_HALFDUPLEXCAP	0x0100
-
-/* Marvell 88E1011 PHY control */
-#define MII_M1011_PHY_SPEC_CONTROL		0x10
-#define MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX	0x20
-#define MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX	0x40
-
-/* Marvell 88E1011 PHY status */
-#define MII_M1011_PHY_SPEC_STATUS		0x11
-#define MII_M1011_PHY_SPEC_STATUS_1000		0x8000
-#define MII_M1011_PHY_SPEC_STATUS_100		0x4000
-#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK	0xc000
-#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX	0x2000
-#define MII_M1011_PHY_SPEC_STATUS_RESOLVED	0x0800
-#define MII_M1011_PHY_SPEC_STATUS_TX_PAUSE	0x0008
-#define MII_M1011_PHY_SPEC_STATUS_RX_PAUSE	0x0004
-
-#endif /* __SUNGEM_PHY_H__ */
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index b6162fe2348e..ef9fdf3652f6 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -282,7 +282,7 @@ static const struct net_device_ops xl_netdev_ops = {
 	.ndo_stop		= xl_close,
 	.ndo_start_xmit		= xl_xmit,
 	.ndo_change_mtu		= xl_change_mtu,
-	.ndo_set_multicast_list = xl_set_rx_mode,
+	.ndo_set_rx_mode	= xl_set_rx_mode,
 	.ndo_set_mac_address	= xl_set_mac_address,
 };
  
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index c4137b0f808e..c7e0149d1514 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -4,9 +4,9 @@
 
 # So far, we only have PCI, ISA, and MCA token ring devices
 menuconfig TR
-	tristate "Token Ring driver support"
+	bool "Token Ring driver support"
 	depends on NETDEVICES && !UML
-	depends on (PCI || ISA || MCA || CCW)
+	depends on (PCI || ISA || MCA || CCW || PCMCIA)
 	select LLC
 	help
 	  Token Ring is IBM's way of communication on a local network; the
@@ -20,6 +20,17 @@ menuconfig TR
 
 if TR
 
+config PCMCIA_IBMTR
+	tristate "IBM PCMCIA tokenring adapter support"
+	depends on IBMTR!=y && PCMCIA
+	---help---
+	  Say Y here if you intend to attach this type of Token Ring PCMCIA
+	  card to your computer. You then also need to say Y to "Token Ring
+	  driver support".
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ibmtr_cs.
+
 config IBMTR
 	tristate "IBM Tropic chipset based adapter support"
 	depends on ISA || MCA
diff --git a/drivers/net/tokenring/Makefile b/drivers/net/tokenring/Makefile
index c88b0a5e5380..f1be8d97b7a8 100644
--- a/drivers/net/tokenring/Makefile
+++ b/drivers/net/tokenring/Makefile
@@ -2,14 +2,15 @@
 # Makefile for drivers/net/tokenring
 #
 
-obj-$(CONFIG_IBMTR) 	+= ibmtr.o
-obj-$(CONFIG_IBMOL) 	+= olympic.o
-obj-$(CONFIG_IBMLS) 	+= lanstreamer.o
-obj-$(CONFIG_TMS380TR) 	+= tms380tr.o
-obj-$(CONFIG_ABYSS) 	+= abyss.o
-obj-$(CONFIG_MADGEMC) 	+= madgemc.o
-obj-$(CONFIG_PROTEON) 	+= proteon.o
-obj-$(CONFIG_TMSPCI) 	+= tmspci.o
-obj-$(CONFIG_SKISA) 	+= skisa.o
-obj-$(CONFIG_SMCTR) 	+= smctr.o
+obj-$(CONFIG_PCMCIA_IBMTR)	+= ibmtr_cs.o
+obj-$(CONFIG_IBMTR)	+= ibmtr.o
+obj-$(CONFIG_IBMOL)	+= olympic.o
+obj-$(CONFIG_IBMLS)	+= lanstreamer.o
+obj-$(CONFIG_TMS380TR)	+= tms380tr.o
+obj-$(CONFIG_ABYSS)	+= abyss.o
+obj-$(CONFIG_MADGEMC)	+= madgemc.o
+obj-$(CONFIG_PROTEON)	+= proteon.o
+obj-$(CONFIG_TMSPCI)	+= tmspci.o
+obj-$(CONFIG_SKISA)	+= skisa.o
+obj-$(CONFIG_SMCTR)	+= smctr.o
 obj-$(CONFIG_3C359)	+= 3c359.o
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index e257a00fe14b..b5c8c18f5046 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -823,7 +823,7 @@ static const struct net_device_ops trdev_netdev_ops = {
 	.ndo_open		= tok_open,
 	.ndo_stop		= tok_close,
 	.ndo_start_xmit		= tok_send_packet,
-	.ndo_set_multicast_list = tok_set_multicast_list,
+	.ndo_set_rx_mode	= tok_set_multicast_list,
 	.ndo_change_mtu		= ibmtr_change_mtu,
 };
 
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c
index 6006d5488fbe..91b684630fc5 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/tokenring/ibmtr_cs.c
@@ -66,7 +66,7 @@
 #include <asm/system.h>
 
 #define PCMCIA
-#include "../tokenring/ibmtr.c"
+#include "ibmtr.c"
 
 
 /*====================================================================*/
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 9354ca9da576..8d71e0d29062 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -231,7 +231,7 @@ static const struct net_device_ops streamer_netdev_ops = {
 #if STREAMER_IOCTL
 	.ndo_do_ioctl		= streamer_ioctl,
 #endif
-	.ndo_set_multicast_list = streamer_set_rx_mode,
+	.ndo_set_rx_mode	= streamer_set_rx_mode,
 	.ndo_set_mac_address	= streamer_set_mac_address,
 };
 
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index e3855aeb13d4..fd8dce90c957 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -201,7 +201,7 @@ static const struct net_device_ops olympic_netdev_ops = {
 	.ndo_stop		= olympic_close,
 	.ndo_start_xmit		= olympic_xmit,
 	.ndo_change_mtu		= olympic_change_mtu,
-	.ndo_set_multicast_list	= olympic_set_rx_mode,
+	.ndo_set_rx_mode	= olympic_set_rx_mode,
 	.ndo_set_mac_address	= olympic_set_mac_address,
 };
 
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index d9044aba7afa..029846a98636 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -3623,7 +3623,7 @@ static const struct net_device_ops smctr_netdev_ops = {
 	.ndo_start_xmit    = smctr_send_packet,
 	.ndo_tx_timeout	   = smctr_timeout,
 	.ndo_get_stats     = smctr_get_stats,
-	.ndo_set_multicast_list = smctr_set_multicast_list,
+	.ndo_set_rx_mode   = smctr_set_multicast_list,
 };
 
 static int __init smctr_probe1(struct net_device *dev, int ioaddr)
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 793020347e54..65e9cf3a71fe 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -2289,7 +2289,7 @@ const struct net_device_ops tms380tr_netdev_ops = {
 	.ndo_start_xmit		= tms380tr_send_packet,
 	.ndo_tx_timeout		= tms380tr_timeout,
 	.ndo_get_stats		= tms380tr_get_stats,
-	.ndo_set_multicast_list = tms380tr_set_multicast_list,
+	.ndo_set_rx_mode	= tms380tr_set_multicast_list,
 	.ndo_set_mac_address	= tms380tr_set_mac_address,
 };
 EXPORT_SYMBOL(tms380tr_netdev_ops);
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 71f3d1a35b74..7bea9c65119e 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -496,7 +496,7 @@ static const struct net_device_ops tap_netdev_ops = {
 	.ndo_start_xmit		= tun_net_xmit,
 	.ndo_change_mtu		= tun_net_change_mtu,
 	.ndo_fix_features	= tun_net_fix_features,
-	.ndo_set_multicast_list	= tun_net_mclist,
+	.ndo_set_rx_mode	= tun_net_mclist,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index c5c4b4def7fb..b843eedd409d 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -872,7 +872,7 @@ static const struct net_device_ops ax88172_netdev_ops = {
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= asix_ioctl,
-	.ndo_set_multicast_list = ax88172_set_multicast,
+	.ndo_set_rx_mode	= ax88172_set_multicast,
 };
 
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -975,7 +975,7 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= asix_ioctl,
-	.ndo_set_multicast_list = asix_set_multicast,
+	.ndo_set_rx_mode	= asix_set_multicast,
 };
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -1270,7 +1270,7 @@ static const struct net_device_ops ax88178_netdev_ops = {
 	.ndo_tx_timeout		= usbnet_tx_timeout,
 	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list = asix_set_multicast,
+	.ndo_set_rx_mode	= asix_set_multicast,
 	.ndo_do_ioctl 		= asix_ioctl,
 	.ndo_change_mtu 	= ax88178_change_mtu,
 };
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 8056f8a27c6a..a68272c93381 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -749,7 +749,7 @@ static const struct net_device_ops catc_netdev_ops = {
 	.ndo_start_xmit		= catc_start_xmit,
 
 	.ndo_tx_timeout		= catc_tx_timeout,
-	.ndo_set_multicast_list = catc_set_multicast_list,
+	.ndo_set_rx_mode	= catc_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index fd622a66ebbf..f06fb78383a1 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -53,7 +53,7 @@
 #include <linux/usb/usbnet.h>
 #include <linux/usb/cdc.h>
 
-#define	DRIVER_VERSION				"01-June-2011"
+#define	DRIVER_VERSION				"04-Aug-2011"
 
 /* CDC NCM subclass 3.2.1 */
 #define USB_CDC_NCM_NDP16_LENGTH_MIN		0x10
@@ -163,35 +163,8 @@ cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
 	usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
 }
 
-static int
-cdc_ncm_do_request(struct cdc_ncm_ctx *ctx, struct usb_cdc_notification *req,
-		   void *data, u16 flags, u16 *actlen, u16 timeout)
-{
-	int err;
-
-	err = usb_control_msg(ctx->udev, (req->bmRequestType & USB_DIR_IN) ?
-				usb_rcvctrlpipe(ctx->udev, 0) :
-				usb_sndctrlpipe(ctx->udev, 0),
-				req->bNotificationType, req->bmRequestType,
-				req->wValue,
-				req->wIndex, data,
-				req->wLength, timeout);
-
-	if (err < 0) {
-		if (actlen)
-			*actlen = 0;
-		return err;
-	}
-
-	if (actlen)
-		*actlen = err;
-
-	return 0;
-}
-
 static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
 {
-	struct usb_cdc_notification req;
 	u32 val;
 	u8 flags;
 	u8 iface_no;
@@ -200,14 +173,14 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
 
 	iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber;
 
-	req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE;
-	req.bNotificationType = USB_CDC_GET_NTB_PARAMETERS;
-	req.wValue = 0;
-	req.wIndex = cpu_to_le16(iface_no);
-	req.wLength = cpu_to_le16(sizeof(ctx->ncm_parm));
-
-	err = cdc_ncm_do_request(ctx, &req, &ctx->ncm_parm, 0, NULL, 1000);
-	if (err) {
+	err = usb_control_msg(ctx->udev,
+				usb_rcvctrlpipe(ctx->udev, 0),
+				USB_CDC_GET_NTB_PARAMETERS,
+				USB_TYPE_CLASS | USB_DIR_IN
+				 | USB_RECIP_INTERFACE,
+				0, iface_no, &ctx->ncm_parm,
+				sizeof(ctx->ncm_parm), 10000);
+	if (err < 0) {
 		pr_debug("failed GET_NTB_PARAMETERS\n");
 		return 1;
 	}
@@ -253,31 +226,43 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
 
 	/* inform device about NTB input size changes */
 	if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
-		req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
-							USB_RECIP_INTERFACE;
-		req.bNotificationType = USB_CDC_SET_NTB_INPUT_SIZE;
-		req.wValue = 0;
-		req.wIndex = cpu_to_le16(iface_no);
 
 		if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) {
-			struct usb_cdc_ncm_ndp_input_size ndp_in_sz;
-
-			req.wLength = 8;
-			ndp_in_sz.dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
-			ndp_in_sz.wNtbInMaxDatagrams =
-					cpu_to_le16(CDC_NCM_DPT_DATAGRAMS_MAX);
-			ndp_in_sz.wReserved = 0;
-			err = cdc_ncm_do_request(ctx, &req, &ndp_in_sz, 0, NULL,
-									1000);
-		} else {
-			__le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+			struct usb_cdc_ncm_ndp_input_size *ndp_in_sz;
 
-			req.wLength = 4;
-			err = cdc_ncm_do_request(ctx, &req, &dwNtbInMaxSize, 0,
-								NULL, 1000);
-		}
+			ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL);
+			if (!ndp_in_sz) {
+				err = -ENOMEM;
+				goto size_err;
+			}
 
-		if (err)
+			err = usb_control_msg(ctx->udev,
+					usb_sndctrlpipe(ctx->udev, 0),
+					USB_CDC_SET_NTB_INPUT_SIZE,
+					USB_TYPE_CLASS | USB_DIR_OUT
+					 | USB_RECIP_INTERFACE,
+					0, iface_no, ndp_in_sz, 8, 1000);
+			kfree(ndp_in_sz);
+		} else {
+			__le32 *dwNtbInMaxSize;
+			dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize),
+					GFP_KERNEL);
+			if (!dwNtbInMaxSize) {
+				err = -ENOMEM;
+				goto size_err;
+			}
+			*dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+
+			err = usb_control_msg(ctx->udev,
+					usb_sndctrlpipe(ctx->udev, 0),
+					USB_CDC_SET_NTB_INPUT_SIZE,
+					USB_TYPE_CLASS | USB_DIR_OUT
+					 | USB_RECIP_INTERFACE,
+					0, iface_no, dwNtbInMaxSize, 4, 1000);
+			kfree(dwNtbInMaxSize);
+		}
+size_err:
+		if (err < 0)
 			pr_debug("Setting NTB Input Size failed\n");
 	}
 
@@ -332,29 +317,24 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
 
 	/* set CRC Mode */
 	if (flags & USB_CDC_NCM_NCAP_CRC_MODE) {
-		req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
-							USB_RECIP_INTERFACE;
-		req.bNotificationType = USB_CDC_SET_CRC_MODE;
-		req.wValue = cpu_to_le16(USB_CDC_NCM_CRC_NOT_APPENDED);
-		req.wIndex = cpu_to_le16(iface_no);
-		req.wLength = 0;
-
-		err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
-		if (err)
+		err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0),
+				USB_CDC_SET_CRC_MODE,
+				USB_TYPE_CLASS | USB_DIR_OUT
+				 | USB_RECIP_INTERFACE,
+				USB_CDC_NCM_CRC_NOT_APPENDED,
+				iface_no, NULL, 0, 1000);
+		if (err < 0)
 			pr_debug("Setting CRC mode off failed\n");
 	}
 
 	/* set NTB format, if both formats are supported */
 	if (ntb_fmt_supported & USB_CDC_NCM_NTH32_SIGN) {
-		req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
-							USB_RECIP_INTERFACE;
-		req.bNotificationType = USB_CDC_SET_NTB_FORMAT;
-		req.wValue = cpu_to_le16(USB_CDC_NCM_NTB16_FORMAT);
-		req.wIndex = cpu_to_le16(iface_no);
-		req.wLength = 0;
-
-		err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
-		if (err)
+		err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0),
+				USB_CDC_SET_NTB_FORMAT, USB_TYPE_CLASS
+				 | USB_DIR_OUT | USB_RECIP_INTERFACE,
+				USB_CDC_NCM_NTB16_FORMAT,
+				iface_no, NULL, 0, 1000);
+		if (err < 0)
 			pr_debug("Setting NTB format to 16-bit failed\n");
 	}
 
@@ -362,23 +342,29 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
 
 	/* set Max Datagram Size (MTU) */
 	if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) {
-		__le16 max_datagram_size;
+		__le16 *max_datagram_size;
 		u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
 
-		req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN |
-							USB_RECIP_INTERFACE;
-		req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE;
-		req.wValue = 0;
-		req.wIndex = cpu_to_le16(iface_no);
-		req.wLength = cpu_to_le16(2);
+		max_datagram_size = kzalloc(sizeof(*max_datagram_size),
+				GFP_KERNEL);
+		if (!max_datagram_size) {
+			err = -ENOMEM;
+			goto max_dgram_err;
+		}
 
-		err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL,
-									1000);
-		if (err) {
+		err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0),
+				USB_CDC_GET_MAX_DATAGRAM_SIZE,
+				USB_TYPE_CLASS | USB_DIR_IN
+				 | USB_RECIP_INTERFACE,
+				0, iface_no, max_datagram_size,
+				2, 1000);
+		if (err < 0) {
 			pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n",
 						CDC_NCM_MIN_DATAGRAM_SIZE);
+			kfree(max_datagram_size);
 		} else {
-			ctx->max_datagram_size = le16_to_cpu(max_datagram_size);
+			ctx->max_datagram_size =
+				le16_to_cpu(*max_datagram_size);
 			/* Check Eth descriptor value */
 			if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) {
 				if (ctx->max_datagram_size > eth_max_sz)
@@ -395,17 +381,17 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
 					CDC_NCM_MIN_DATAGRAM_SIZE;
 
 			/* if value changed, update device */
-			req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
-							USB_RECIP_INTERFACE;
-			req.bNotificationType = USB_CDC_SET_MAX_DATAGRAM_SIZE;
-			req.wValue = 0;
-			req.wIndex = cpu_to_le16(iface_no);
-			req.wLength = 2;
-			max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
-
-			err = cdc_ncm_do_request(ctx, &req, &max_datagram_size,
-								0, NULL, 1000);
-			if (err)
+			err = usb_control_msg(ctx->udev,
+						usb_sndctrlpipe(ctx->udev, 0),
+						USB_CDC_SET_MAX_DATAGRAM_SIZE,
+						USB_TYPE_CLASS | USB_DIR_OUT
+						 | USB_RECIP_INTERFACE,
+						0,
+						iface_no, max_datagram_size,
+						2, 1000);
+			kfree(max_datagram_size);
+max_dgram_err:
+			if (err < 0)
 				pr_debug("SET_MAX_DATAGRAM_SIZE failed\n");
 		}
 
@@ -671,7 +657,7 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
 	u32 rem;
 	u32 offset;
 	u32 last_offset;
-	u16 n = 0;
+	u16 n = 0, index;
 	u8 ready2send = 0;
 
 	/* if there is a remaining skb, it gets priority */
@@ -859,8 +845,8 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
 					cpu_to_le16(sizeof(ctx->tx_ncm.nth16));
 	ctx->tx_ncm.nth16.wSequence = cpu_to_le16(ctx->tx_seq);
 	ctx->tx_ncm.nth16.wBlockLength = cpu_to_le16(last_offset);
-	ctx->tx_ncm.nth16.wNdpIndex = ALIGN(sizeof(struct usb_cdc_ncm_nth16),
-							ctx->tx_ndp_modulus);
+	index = ALIGN(sizeof(struct usb_cdc_ncm_nth16), ctx->tx_ndp_modulus);
+	ctx->tx_ncm.nth16.wNdpIndex = cpu_to_le16(index);
 
 	memcpy(skb_out->data, &(ctx->tx_ncm.nth16), sizeof(ctx->tx_ncm.nth16));
 	ctx->tx_seq++;
@@ -873,12 +859,11 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
 	ctx->tx_ncm.ndp16.wLength = cpu_to_le16(rem);
 	ctx->tx_ncm.ndp16.wNextNdpIndex = 0; /* reserved */
 
-	memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex,
+	memcpy(((u8 *)skb_out->data) + index,
 						&(ctx->tx_ncm.ndp16),
 						sizeof(ctx->tx_ncm.ndp16));
 
-	memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex +
-					sizeof(ctx->tx_ncm.ndp16),
+	memcpy(((u8 *)skb_out->data) + index + sizeof(ctx->tx_ncm.ndp16),
 					&(ctx->tx_ncm.dpe16),
 					(ctx->tx_curr_frame_num + 1) *
 					sizeof(struct usb_cdc_ncm_dpe16));
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 1d93133e9b74..fbc0e4def767 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -428,7 +428,7 @@ static const struct net_device_ops dm9601_netdev_ops = {
 	.ndo_change_mtu		= usbnet_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl 		= dm9601_ioctl,
-	.ndo_set_multicast_list = dm9601_set_multicast,
+	.ndo_set_rx_mode	= dm9601_set_multicast,
 	.ndo_set_mac_address	= dm9601_set_mac_address,
 };
 
diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c
index be02a25da71a..131ac6c172f6 100644
--- a/drivers/net/usb/int51x1.c
+++ b/drivers/net/usb/int51x1.c
@@ -193,7 +193,7 @@ static const struct net_device_ops int51x1_netdev_ops = {
 	.ndo_change_mtu		= usbnet_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= int51x1_set_multicast,
+	.ndo_set_rx_mode	= int51x1_set_multicast,
 };
 
 static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf)
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index ad0298f9b5f9..582ca2dfa5f9 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -985,7 +985,7 @@ static const struct net_device_ops kaweth_netdev_ops = {
 	.ndo_stop =			kaweth_close,
 	.ndo_start_xmit =		kaweth_start_xmit,
 	.ndo_tx_timeout =		kaweth_tx_timeout,
-	.ndo_set_multicast_list =	kaweth_set_rx_mode,
+	.ndo_set_rx_mode =		kaweth_set_rx_mode,
 	.ndo_get_stats =		kaweth_netdev_stats,
 	.ndo_change_mtu =		eth_change_mtu,
 	.ndo_set_mac_address =		eth_mac_addr,
diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
index 1d83ccfd7277..1e7221951056 100644
--- a/drivers/net/usb/lg-vl600.c
+++ b/drivers/net/usb/lg-vl600.c
@@ -89,6 +89,8 @@ static int vl600_bind(struct usbnet *dev, struct usb_interface *intf)
 	 * addresses have no meaning, the destination and the source of every
 	 * packet depend only on whether it is on the IN or OUT endpoint.  */
 	dev->net->flags |= IFF_NOARP;
+	/* IPv6 NDP relies on multicast.  Enable it by default. */
+	dev->net->flags |= IFF_MULTICAST;
 
 	return ret;
 }
@@ -200,6 +202,14 @@ static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		} else {
 			memset(ethhdr->h_source, 0, ETH_ALEN);
 			memcpy(ethhdr->h_dest, dev->net->dev_addr, ETH_ALEN);
+
+			/* Inbound IPv6 packets have an IPv4 ethertype (0x800)
+			 * for some reason.  Peek at the L3 header to check
+			 * for IPv6 packets, and set the ethertype to IPv6
+			 * (0x86dd) so Linux can understand it.
+			 */
+			if ((buf->data[sizeof(*ethhdr)] & 0xf0) == 0x60)
+				ethhdr->h_proto = __constant_htons(ETH_P_IPV6);
 		}
 
 		if (count) {
@@ -297,6 +307,15 @@ encapsulate:
 	if (skb->len < full_len) /* Pad */
 		skb_put(skb, full_len - skb->len);
 
+	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
+	 * Check if this is an IPv6 packet, and set the ethertype
+	 * to 0x800
+	 */
+	if ((skb->data[sizeof(struct vl600_pkt_hdr *) + 0x22] & 0xf0) == 0x60) {
+		skb->data[sizeof(struct vl600_pkt_hdr *) + 0x20] = 0x08;
+		skb->data[sizeof(struct vl600_pkt_hdr *) + 0x21] = 0;
+	}
+
 	return skb;
 }
 
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 2b791392e788..db2cb74bf854 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -553,7 +553,7 @@ static const struct net_device_ops mcs7830_netdev_ops = {
 	.ndo_change_mtu		= usbnet_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl 		= mcs7830_ioctl,
-	.ndo_set_multicast_list = mcs7830_set_multicast,
+	.ndo_set_rx_mode	= mcs7830_set_multicast,
 	.ndo_set_mac_address	= mcs7830_set_mac_address,
 };
 
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index ef3667690b12..769f5090bda1 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1476,7 +1476,7 @@ static const struct net_device_ops pegasus_netdev_ops = {
 	.ndo_stop =			pegasus_close,
 	.ndo_do_ioctl =			pegasus_ioctl,
 	.ndo_start_xmit =		pegasus_start_xmit,
-	.ndo_set_multicast_list =	pegasus_set_multicast,
+	.ndo_set_rx_mode =		pegasus_set_multicast,
 	.ndo_get_stats =		pegasus_netdev_stats,
 	.ndo_tx_timeout =		pegasus_tx_timeout,
 	.ndo_change_mtu =		eth_change_mtu,
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index 041fb7d43c4f..b00d692587a2 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -899,7 +899,7 @@ static const struct net_device_ops rtl8150_netdev_ops = {
 	.ndo_do_ioctl		= rtl8150_ioctl,
 	.ndo_start_xmit		= rtl8150_start_xmit,
 	.ndo_tx_timeout 	= rtl8150_tx_timeout,
-	.ndo_set_multicast_list = rtl8150_set_multicast,
+	.ndo_set_rx_mode	= rtl8150_set_multicast,
 	.ndo_set_mac_address	= rtl8150_set_mac_address,
 
 	.ndo_change_mtu		= eth_change_mtu,
@@ -977,7 +977,6 @@ static void rtl8150_disconnect(struct usb_interface *intf)
 	usb_set_intfdata(intf, NULL);
 	if (dev) {
 		set_bit(RTL8150_UNPLUG, &dev->flags);
-		tasklet_disable(&dev->tl);
 		tasklet_kill(&dev->tl);
 		unregister_netdev(dev->netdev);
 		unlink_all_urbs(dev);
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 15b3d6888ae9..22a7cf951e72 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1000,7 +1000,7 @@ static const struct net_device_ops smsc75xx_netdev_ops = {
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl 		= smsc75xx_ioctl,
-	.ndo_set_multicast_list = smsc75xx_set_multicast,
+	.ndo_set_rx_mode	= smsc75xx_set_multicast,
 	.ndo_set_features	= smsc75xx_set_features,
 };
 
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index f74f3ce71526..eff67678c5a6 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -972,7 +972,7 @@ static const struct net_device_ops smsc95xx_netdev_ops = {
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl 		= smsc95xx_ioctl,
-	.ndo_set_multicast_list = smsc95xx_set_multicast,
+	.ndo_set_rx_mode	= smsc95xx_set_multicast,
 	.ndo_set_features	= smsc95xx_set_features,
 };
 
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 0c7321c35ad4..4f09f88f1c28 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -949,6 +949,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 		return -ENOMEM;
 
 	/* Set up network device as normal. */
+	dev->priv_flags |= IFF_UNICAST_FLT;
 	dev->netdev_ops = &virtnet_netdev;
 	dev->features = NETIF_F_HIGHDMA;
 
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 1cbacb389652..759c1a49cc7b 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1929,14 +1929,17 @@ static void
 vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 {
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
-	u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
-	unsigned long flags;
 
-	VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
-	spin_lock_irqsave(&adapter->cmd_lock, flags);
-	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
-			       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
-	spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+	if (!(netdev->flags & IFF_PROMISC)) {
+		u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+		unsigned long flags;
+
+		VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
+		spin_lock_irqsave(&adapter->cmd_lock, flags);
+		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+				       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+		spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+	}
 
 	set_bit(vid, adapter->active_vlans);
 }
@@ -1946,14 +1949,17 @@ static void
 vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 {
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
-	u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
-	unsigned long flags;
 
-	VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
-	spin_lock_irqsave(&adapter->cmd_lock, flags);
-	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
-			       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
-	spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+	if (!(netdev->flags & IFF_PROMISC)) {
+		u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+		unsigned long flags;
+
+		VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
+		spin_lock_irqsave(&adapter->cmd_lock, flags);
+		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+				       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+		spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+	}
 
 	clear_bit(vid, adapter->active_vlans);
 }
@@ -2870,7 +2876,7 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 		.ndo_set_features = vmxnet3_set_features,
 		.ndo_get_stats64 = vmxnet3_get_stats64,
 		.ndo_tx_timeout = vmxnet3_tx_timeout,
-		.ndo_set_multicast_list = vmxnet3_set_mc,
+		.ndo_set_rx_mode = vmxnet3_set_mc,
 		.ndo_vlan_rx_add_vid = vmxnet3_vlan_rx_add_vid,
 		.ndo_vlan_rx_kill_vid = vmxnet3_vlan_rx_kill_vid,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 055a918067e6..0d7645581f91 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -515,37 +515,37 @@ static int ppp_rx(struct sk_buff *skb)
 	switch (cp->code) {
 	case CP_CONF_REQ:
 		ppp_cp_parse_cr(dev, pid, cp->id, len, skb->data);
-		goto out;
+		break;
 
 	case CP_CONF_ACK:
 		if (cp->id == proto->cr_id)
 			ppp_cp_event(dev, pid, RCA, 0, 0, 0, NULL);
-		goto out;
+		break;
 
 	case CP_CONF_REJ:
 	case CP_CONF_NAK:
 		if (cp->id == proto->cr_id)
 			ppp_cp_event(dev, pid, RCN, 0, 0, 0, NULL);
-		goto out;
+		break;
 
 	case CP_TERM_REQ:
 		ppp_cp_event(dev, pid, RTR, 0, cp->id, 0, NULL);
-		goto out;
+		break;
 
 	case CP_TERM_ACK:
 		ppp_cp_event(dev, pid, RTA, 0, 0, 0, NULL);
-		goto out;
+		break;
 
 	case CP_CODE_REJ:
 		ppp_cp_event(dev, pid, RXJ_BAD, 0, 0, 0, NULL);
-		goto out;
+		break;
 
 	default:
 		len += sizeof(struct cp_header);
 		if (len > dev->mtu)
 			len = dev->mtu;
 		ppp_cp_event(dev, pid, RUC, 0, 0, len, cp);
-		goto out;
+		break;
 	}
 	goto out;
 
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 86127bcc9f7a..783168cce077 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -212,7 +212,7 @@ static const struct net_device_ops sbni_netdev_ops = {
 	.ndo_open		= sbni_open,
 	.ndo_stop		= sbni_close,
 	.ndo_start_xmit		= sbni_start_xmit,
-	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_do_ioctl		= sbni_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index e1b3e3c134fd..ac1176a4f465 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2754,7 +2754,7 @@ static const struct net_device_ops airo_netdev_ops = {
 	.ndo_stop		= airo_close,
 	.ndo_start_xmit		= airo_start_xmit,
 	.ndo_get_stats		= airo_get_stats,
-	.ndo_set_multicast_list	= airo_set_multicast_list,
+	.ndo_set_rx_mode	= airo_set_multicast_list,
 	.ndo_set_mac_address	= airo_set_mac_address,
 	.ndo_do_ioctl		= airo_ioctl,
 	.ndo_change_mtu		= airo_change_mtu,
@@ -2766,7 +2766,7 @@ static const struct net_device_ops mpi_netdev_ops = {
 	.ndo_stop		= airo_close,
 	.ndo_start_xmit		= mpi_start_xmit,
 	.ndo_get_stats		= airo_get_stats,
-	.ndo_set_multicast_list	= airo_set_multicast_list,
+	.ndo_set_rx_mode	= airo_set_multicast_list,
 	.ndo_set_mac_address	= airo_set_mac_address,
 	.ndo_do_ioctl		= airo_ioctl,
 	.ndo_change_mtu		= airo_change_mtu,
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 108d55a06965..e9ea38d0fff6 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1729,6 +1729,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
 
 	if (dma_mapping_error(ah->dev, bf->skbaddr)) {
 		ATH5K_ERR(ah, "beacon DMA mapping failed\n");
+		dev_kfree_skb_any(skb);
+		bf->skb = NULL;
 		return -EIO;
 	}
 
@@ -1813,8 +1815,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	ath5k_txbuf_free_skb(ah, avf->bbuf);
 	avf->bbuf->skb = skb;
 	ret = ath5k_beacon_setup(ah, avf->bbuf);
-	if (ret)
-		avf->bbuf->skb = NULL;
 out:
 	return ret;
 }
@@ -1834,6 +1834,7 @@ ath5k_beacon_send(struct ath5k_hw *ah)
 	struct ath5k_vif *avf;
 	struct ath5k_buf *bf;
 	struct sk_buff *skb;
+	int err;
 
 	ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n");
 
@@ -1882,11 +1883,6 @@ ath5k_beacon_send(struct ath5k_hw *ah)
 
 	avf = (void *)vif->drv_priv;
 	bf = avf->bbuf;
-	if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION ||
-		     ah->opmode == NL80211_IFTYPE_MONITOR)) {
-		ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
-		return;
-	}
 
 	/*
 	 * Stop any current dma and put the new frame on the queue.
@@ -1900,8 +1896,17 @@ ath5k_beacon_send(struct ath5k_hw *ah)
 
 	/* refresh the beacon for AP or MESH mode */
 	if (ah->opmode == NL80211_IFTYPE_AP ||
-	    ah->opmode == NL80211_IFTYPE_MESH_POINT)
-		ath5k_beacon_update(ah->hw, vif);
+	    ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+		err = ath5k_beacon_update(ah->hw, vif);
+		if (err)
+			return;
+	}
+
+	if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION ||
+		     ah->opmode == NL80211_IFTYPE_MONITOR)) {
+		ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb);
+		return;
+	}
 
 	trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]);
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 908463915b99..cb8bcc4e6091 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -307,7 +307,7 @@ static const struct ar9300_eeprom ar9300_default = {
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
 
-		 { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 
@@ -884,7 +884,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
 
-		 { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 
@@ -2040,7 +2040,7 @@ static const struct ar9300_eeprom ar9300_x112 = {
 		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
 
-		{ { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
 		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 
@@ -3861,7 +3861,7 @@ static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
 				}
 			} else {
 				reg_pmu_set = (5 << 1) | (7 << 4) |
-					      (1 << 8) | (2 << 14) |
+					      (2 << 8) | (2 << 14) |
 					      (6 << 17) | (1 << 20) |
 					      (3 << 24) | (1 << 28);
 			}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 3aca9fa2d27b..80397de11e0d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -850,7 +850,7 @@
 #define AR_PHY_TPC_11_B1         (AR_SM1_BASE + 0x220)
 #define AR_PHY_PDADC_TAB_1       (AR_SM1_BASE + 0x240)
 #define AR_PHY_TX_IQCAL_STATUS_B1   (AR_SM1_BASE + 0x48c)
-#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i)    (AR_SM_BASE + 0x450 + ((_i) << 2))
+#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i)    (AR_SM1_BASE + 0x450 + ((_i) << 2))
 
 /*
  * Channel 2 Register Map
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index e76b40ddbc48..c5d890e74a1e 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -816,9 +816,23 @@ static u64 supported_dma_mask(struct b43_wldev *dev)
 	u32 tmp;
 	u16 mmio_base;
 
-	tmp = b43_read32(dev, SSB_TMSHIGH);
-	if (tmp & SSB_TMSHIGH_DMA64)
-		return DMA_BIT_MASK(64);
+	switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+	case B43_BUS_BCMA:
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST);
+		if (tmp & BCMA_IOST_DMA64)
+			return DMA_BIT_MASK(64);
+		break;
+#endif
+#ifdef CONFIG_B43_SSB
+	case B43_BUS_SSB:
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
+		if (tmp & SSB_TMSHIGH_DMA64)
+			return DMA_BIT_MASK(64);
+		break;
+#endif
+	}
+
 	mmio_base = b43_dmacontroller_base(0, 0);
 	b43_write32(dev, mmio_base + B43_DMA32_TXCTL, B43_DMA32_TXADDREXT_MASK);
 	tmp = b43_read32(dev, mmio_base + B43_DMA32_TXCTL);
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 89a116fba1de..bfa0d54221e8 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -816,7 +816,7 @@ static const struct net_device_ops hostap_netdev_ops = {
 	.ndo_stop		= prism2_close,
 	.ndo_do_ioctl		= hostap_ioctl,
 	.ndo_set_mac_address	= prism2_set_mac_address,
-	.ndo_set_multicast_list = hostap_set_multicast_list,
+	.ndo_set_rx_mode	= hostap_set_multicast_list,
 	.ndo_change_mtu 	= prism2_change_mtu,
 	.ndo_tx_timeout 	= prism2_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -829,7 +829,7 @@ static const struct net_device_ops hostap_mgmt_netdev_ops = {
 	.ndo_stop		= prism2_close,
 	.ndo_do_ioctl		= hostap_ioctl,
 	.ndo_set_mac_address	= prism2_set_mac_address,
-	.ndo_set_multicast_list = hostap_set_multicast_list,
+	.ndo_set_rx_mode	= hostap_set_multicast_list,
 	.ndo_change_mtu 	= prism2_change_mtu,
 	.ndo_tx_timeout 	= prism2_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -842,7 +842,7 @@ static const struct net_device_ops hostap_master_ops = {
 	.ndo_stop		= prism2_close,
 	.ndo_do_ioctl		= hostap_ioctl,
 	.ndo_set_mac_address	= prism2_set_mac_address,
-	.ndo_set_multicast_list = hostap_set_multicast_list,
+	.ndo_set_rx_mode	= hostap_set_multicast_list,
 	.ndo_change_mtu 	= prism2_change_mtu,
 	.ndo_tx_timeout 	= prism2_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 4395977d5369..f303df43ed3f 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11702,7 +11702,7 @@ static const struct net_device_ops ipw_netdev_ops = {
 	.ndo_init		= ipw_net_init,
 	.ndo_open		= ipw_net_open,
 	.ndo_stop		= ipw_net_stop,
-	.ndo_set_multicast_list	= ipw_net_set_multicast_list,
+	.ndo_set_rx_mode	= ipw_net_set_multicast_list,
 	.ndo_set_mac_address	= ipw_net_set_mac_address,
 	.ndo_start_xmit		= libipw_xmit,
 	.ndo_change_mtu		= libipw_change_mtu,
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index d62d1fb4177f..d1c1d52931f1 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -867,7 +867,7 @@ static const struct net_device_ops lbs_netdev_ops = {
 	.ndo_stop		= lbs_eth_stop,
 	.ndo_start_xmit		= lbs_hard_start_xmit,
 	.ndo_set_mac_address	= lbs_set_mac_address,
-	.ndo_set_multicast_list = lbs_set_multicast_list,
+	.ndo_set_rx_mode	= lbs_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 };
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
index 138699baf90e..e87c031b298f 100644
--- a/drivers/net/wireless/libertas/mesh.c
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -978,7 +978,7 @@ static const struct net_device_ops mesh_netdev_ops = {
 	.ndo_stop 		= lbs_mesh_stop,
 	.ndo_start_xmit		= lbs_hard_start_xmit,
 	.ndo_set_mac_address	= lbs_set_mac_address,
-	.ndo_set_multicast_list = lbs_set_multicast_list,
+	.ndo_set_rx_mode	= lbs_set_multicast_list,
 };
 
 /**
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 53579ad83e5c..48b4d95219fb 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -627,7 +627,7 @@ static const struct net_device_ops mwifiex_netdev_ops = {
 	.ndo_set_mac_address = mwifiex_set_mac_address,
 	.ndo_tx_timeout = mwifiex_tx_timeout,
 	.ndo_get_stats = mwifiex_get_stats,
-	.ndo_set_multicast_list = mwifiex_set_multicast_list,
+	.ndo_set_rx_mode = mwifiex_set_multicast_list,
 };
 
 /*
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index ef7efe839bb8..b52acc4b4086 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -2135,7 +2135,7 @@ static const struct net_device_ops orinoco_netdev_ops = {
 	.ndo_open		= orinoco_open,
 	.ndo_stop		= orinoco_stop,
 	.ndo_start_xmit		= orinoco_xmit,
-	.ndo_set_multicast_list	= orinoco_set_multicast_list,
+	.ndo_set_rx_mode	= orinoco_set_multicast_list,
 	.ndo_change_mtu		= orinoco_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
index 811e87f8a349..0793e4265b43 100644
--- a/drivers/net/wireless/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -1562,7 +1562,7 @@ static const struct net_device_ops ezusb_netdev_ops = {
 	.ndo_open		= orinoco_open,
 	.ndo_stop		= orinoco_stop,
 	.ndo_start_xmit		= ezusb_xmit,
-	.ndo_set_multicast_list	= orinoco_set_multicast_list,
+	.ndo_set_rx_mode	= orinoco_set_multicast_list,
 	.ndo_change_mtu		= orinoco_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 2a06ebcd67c5..0021e4948512 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -273,7 +273,7 @@ static const struct net_device_ops ray_netdev_ops = {
 	.ndo_start_xmit		= ray_dev_start_xmit,
 	.ndo_set_config		= ray_dev_config,
 	.ndo_get_stats		= ray_get_stats,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 15464d501452..0c13840a7de5 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -3390,7 +3390,7 @@ static const struct net_device_ops rndis_wlan_netdev_ops = {
 	.ndo_tx_timeout		= usbnet_tx_timeout,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= rndis_wlan_set_multicast_list,
+	.ndo_set_rx_mode	= rndis_wlan_set_multicast_list,
 };
 
 static int rndis_wlan_bind(struct usbnet *usbdev, struct usb_interface *intf)
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 507559361d87..939563162fb3 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -921,6 +921,8 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x07d1, 0x3c16) },
 	/* Draytek */
 	{ USB_DEVICE(0x07fa, 0x7712) },
+	/* DVICO */
+	{ USB_DEVICE(0x0fe9, 0xb307) },
 	/* Edimax */
 	{ USB_DEVICE(0x7392, 0x7711) },
 	{ USB_DEVICE(0x7392, 0x7717) },
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6a93939f44e8..0baeb894f093 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2420,6 +2420,7 @@ static struct usb_device_id rt73usb_device_table[] = {
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00d8) },
 	{ USB_DEVICE(0x0411, 0x00d9) },
+	{ USB_DEVICE(0x0411, 0x00e6) },
 	{ USB_DEVICE(0x0411, 0x00f4) },
 	{ USB_DEVICE(0x0411, 0x0116) },
 	{ USB_DEVICE(0x0411, 0x0119) },
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 195666a0c854..424b8a0323e2 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -281,6 +281,8 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817d, rtl92cu_hal_cfg)},
 	/* 8188CE-VAU USB minCard (b/g mode only) */
 	{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817e, rtl92cu_hal_cfg)},
+	/* 8188RU in Alfa AWUS036NHR */
+	{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)},
 	/* 8188 Combo for BC4 */
 	{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)},
 
@@ -303,20 +305,23 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
 	/* HP - Lite-On ,8188CUS Slim Combo */
 	{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
+	{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
 	{RTL_USB_DEVICE(0x2001, 0x3308, rtl92cu_hal_cfg)}, /*D-Link - Alpha*/
 	{RTL_USB_DEVICE(0x2019, 0xab2a, rtl92cu_hal_cfg)}, /*Planex - Abocom*/
 	{RTL_USB_DEVICE(0x2019, 0xed17, rtl92cu_hal_cfg)}, /*PCI - Edimax*/
 	{RTL_USB_DEVICE(0x20f4, 0x648b, rtl92cu_hal_cfg)}, /*TRENDnet - Cameo*/
 	{RTL_USB_DEVICE(0x7392, 0x7811, rtl92cu_hal_cfg)}, /*Edimax - Edimax*/
-	{RTL_USB_DEVICE(0x3358, 0x13d3, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/
+	{RTL_USB_DEVICE(0x13d3, 0x3358, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/
 	/* Russian customer -Azwave (8188CE-VAU  b/g mode only) */
-	{RTL_USB_DEVICE(0x3359, 0x13d3, rtl92cu_hal_cfg)},
+	{RTL_USB_DEVICE(0x13d3, 0x3359, rtl92cu_hal_cfg)},
+	{RTL_USB_DEVICE(0x4855, 0x0090, rtl92cu_hal_cfg)}, /* Feixun */
+	{RTL_USB_DEVICE(0x4855, 0x0091, rtl92cu_hal_cfg)}, /* NetweeN-Feixun */
+	{RTL_USB_DEVICE(0x9846, 0x9041, rtl92cu_hal_cfg)}, /* Netgear Cameo */
 
 	/****** 8192CU ********/
 	{RTL_USB_DEVICE(0x0586, 0x341f, rtl92cu_hal_cfg)}, /*Zyxel -Abocom*/
 	{RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/
 	{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
-	{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Abocom -Abocom*/
 	{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
 	{RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
 	{RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
diff --git a/drivers/net/wireless/wl1251/acx.c b/drivers/net/wireless/wl1251/acx.c
index ef8370edace7..ad87a1ac6462 100644
--- a/drivers/net/wireless/wl1251/acx.c
+++ b/drivers/net/wireless/wl1251/acx.c
@@ -140,8 +140,6 @@ int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth)
 	auth->sleep_auth = sleep_auth;
 
 	ret = wl1251_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
-	if (ret < 0)
-		return ret;
 
 out:
 	kfree(auth);
@@ -681,10 +679,8 @@ int wl1251_acx_cca_threshold(struct wl1251 *wl)
 
 	ret = wl1251_cmd_configure(wl, ACX_CCA_THRESHOLD,
 				   detection, sizeof(*detection));
-	if (ret < 0) {
+	if (ret < 0)
 		wl1251_warning("failed to set cca threshold: %d", ret);
-		return ret;
-	}
 
 out:
 	kfree(detection);
diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c
index 81f164bc4888..d14d69d733a0 100644
--- a/drivers/net/wireless/wl1251/cmd.c
+++ b/drivers/net/wireless/wl1251/cmd.c
@@ -241,7 +241,7 @@ int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
 	if (ret < 0) {
 		wl1251_error("tx %s cmd for channel %d failed",
 			     enable ? "start" : "stop", channel);
-		return ret;
+		goto out;
 	}
 
 	wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 415eec401e2e..8efa2f2d9579 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -1722,7 +1722,7 @@ static const struct net_device_ops zd1201_netdev_ops = {
 	.ndo_stop		= zd1201_net_stop,
 	.ndo_start_xmit		= zd1201_hard_start_xmit,
 	.ndo_tx_timeout		= zd1201_tx_timeout,
-	.ndo_set_multicast_list = zd1201_set_multicast,
+	.ndo_set_rx_mode	= zd1201_set_multicast,
 	.ndo_set_mac_address	= zd1201_set_mac_address,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,