diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 353 |
2 files changed, 224 insertions, 130 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 97035766c291..e28c0d2c58e9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -159,6 +159,7 @@ config DWMAC_SUN8I tristate "Allwinner sun8i GMAC support" default ARCH_SUNXI depends on OF && (ARCH_SUNXI || COMPILE_TEST) + select MDIO_BUS_MUX ---help--- Support for Allwinner H3 A83T A64 EMAC ethernet controllers. diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 39c2122a4f26..b3eb344bb158 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -17,6 +17,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/iopoll.h> +#include <linux/mdio-mux.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of_device.h> @@ -41,14 +42,14 @@ * This value is used for disabling properly EMAC * and used as a good starting value in case of the * boot process(uboot) leave some stuff. - * @internal_phy: Does the MAC embed an internal PHY + * @soc_has_internal_phy: Does the MAC embed an internal PHY * @support_mii: Does the MAC handle MII * @support_rmii: Does the MAC handle RMII * @support_rgmii: Does the MAC handle RGMII */ struct emac_variant { u32 default_syscon_value; - int internal_phy; + bool soc_has_internal_phy; bool support_mii; bool support_rmii; bool support_rgmii; @@ -61,7 +62,8 @@ struct emac_variant { * @rst_ephy: reference to the optional EPHY reset for the internal PHY * @variant: reference to the current board variant * @regmap: regmap for using the syscon - * @use_internal_phy: Does the current PHY choice imply using the internal PHY + * @internal_phy_powered: Does the internal PHY is enabled + * @mux_handle: Internal pointer used by mdio-mux lib */ struct sunxi_priv_data { struct clk *tx_clk; @@ -70,12 +72,13 @@ struct sunxi_priv_data { struct reset_control *rst_ephy; const struct emac_variant *variant; struct regmap *regmap; - bool use_internal_phy; + bool internal_phy_powered; + void *mux_handle; }; static const struct emac_variant emac_variant_h3 = { .default_syscon_value = 0x58000, - .internal_phy = PHY_INTERFACE_MODE_MII, + .soc_has_internal_phy = true, .support_mii = true, .support_rmii = true, .support_rgmii = true @@ -83,20 +86,20 @@ static const struct emac_variant emac_variant_h3 = { static const struct emac_variant emac_variant_v3s = { .default_syscon_value = 0x38000, - .internal_phy = PHY_INTERFACE_MODE_MII, + .soc_has_internal_phy = true, .support_mii = true }; static const struct emac_variant emac_variant_a83t = { .default_syscon_value = 0, - .internal_phy = 0, + .soc_has_internal_phy = false, .support_mii = true, .support_rgmii = true }; static const struct emac_variant emac_variant_a64 = { .default_syscon_value = 0, - .internal_phy = 0, + .soc_has_internal_phy = false, .support_mii = true, .support_rmii = true, .support_rgmii = true @@ -195,6 +198,9 @@ static const struct emac_variant emac_variant_a64 = { #define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */ #define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */ #define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */ +#define H3_EPHY_MUX_MASK (H3_EPHY_SHUTDOWN | H3_EPHY_SELECT) +#define DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID 1 +#define DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID 2 /* H3/A64 specific bits */ #define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */ @@ -634,6 +640,159 @@ static int sun8i_dwmac_reset(struct stmmac_priv *priv) return 0; } +/* Search in mdio-mux node for internal PHY node and get its clk/reset */ +static int get_ephy_nodes(struct stmmac_priv *priv) +{ + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + struct device_node *mdio_mux, *iphynode; + struct device_node *mdio_internal; + int ret; + + mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux"); + if (!mdio_mux) { + dev_err(priv->device, "Cannot get mdio-mux node\n"); + return -ENODEV; + } + + mdio_internal = of_find_compatible_node(mdio_mux, NULL, + "allwinner,sun8i-h3-mdio-internal"); + if (!mdio_internal) { + dev_err(priv->device, "Cannot get internal_mdio node\n"); + return -ENODEV; + } + + /* Seek for internal PHY */ + for_each_child_of_node(mdio_internal, iphynode) { + gmac->ephy_clk = of_clk_get(iphynode, 0); + if (IS_ERR(gmac->ephy_clk)) + continue; + gmac->rst_ephy = of_reset_control_get_exclusive(iphynode, NULL); + if (IS_ERR(gmac->rst_ephy)) { + ret = PTR_ERR(gmac->rst_ephy); + if (ret == -EPROBE_DEFER) + return ret; + continue; + } + dev_info(priv->device, "Found internal PHY node\n"); + return 0; + } + return -ENODEV; +} + +static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) +{ + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + int ret; + + if (gmac->internal_phy_powered) { + dev_warn(priv->device, "Internal PHY already powered\n"); + return 0; + } + + dev_info(priv->device, "Powering internal PHY\n"); + ret = clk_prepare_enable(gmac->ephy_clk); + if (ret) { + dev_err(priv->device, "Cannot enable internal PHY\n"); + return ret; + } + + /* Make sure the EPHY is properly reseted, as U-Boot may leave + * it at deasserted state, and thus it may fail to reset EMAC. + */ + reset_control_assert(gmac->rst_ephy); + + ret = reset_control_deassert(gmac->rst_ephy); + if (ret) { + dev_err(priv->device, "Cannot deassert internal phy\n"); + clk_disable_unprepare(gmac->ephy_clk); + return ret; + } + + gmac->internal_phy_powered = true; + + return 0; +} + +static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac) +{ + if (!gmac->internal_phy_powered) + return 0; + + clk_disable_unprepare(gmac->ephy_clk); + reset_control_assert(gmac->rst_ephy); + gmac->internal_phy_powered = false; + return 0; +} + +/* MDIO multiplexing switch function + * This function is called by the mdio-mux layer when it thinks the mdio bus + * multiplexer needs to switch. + * 'current_child' is the current value of the mux register + * 'desired_child' is the value of the 'reg' property of the target child MDIO + * node. + * The first time this function is called, current_child == -1. + * If current_child == desired_child, then the mux is already set to the + * correct bus. + */ +static int mdio_mux_syscon_switch_fn(int current_child, int desired_child, + void *data) +{ + struct stmmac_priv *priv = data; + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + u32 reg, val; + int ret = 0; + bool need_power_ephy = false; + + if (current_child ^ desired_child) { + regmap_read(gmac->regmap, SYSCON_EMAC_REG, ®); + switch (desired_child) { + case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID: + dev_info(priv->device, "Switch mux to internal PHY"); + val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT; + + need_power_ephy = true; + break; + case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID: + dev_info(priv->device, "Switch mux to external PHY"); + val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN; + need_power_ephy = false; + break; + default: + dev_err(priv->device, "Invalid child ID %x\n", + desired_child); + return -EINVAL; + } + regmap_write(gmac->regmap, SYSCON_EMAC_REG, val); + if (need_power_ephy) { + ret = sun8i_dwmac_power_internal_phy(priv); + if (ret) + return ret; + } else { + sun8i_dwmac_unpower_internal_phy(gmac); + } + /* After changing syscon value, the MAC need reset or it will + * use the last value (and so the last PHY set). + */ + ret = sun8i_dwmac_reset(priv); + } + return ret; +} + +static int sun8i_dwmac_register_mdio_mux(struct stmmac_priv *priv) +{ + int ret; + struct device_node *mdio_mux; + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + + mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux"); + if (!mdio_mux) + return -ENODEV; + + ret = mdio_mux_init(priv->device, mdio_mux, mdio_mux_syscon_switch_fn, + &gmac->mux_handle, priv, priv->mii); + return ret; +} + static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) { struct sunxi_priv_data *gmac = priv->plat->bsp_priv; @@ -648,35 +807,25 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) "Current syscon value is not the default %x (expect %x)\n", val, reg); - if (gmac->variant->internal_phy) { - if (!gmac->use_internal_phy) { - /* switch to external PHY interface */ - reg &= ~H3_EPHY_SELECT; - } else { - reg |= H3_EPHY_SELECT; - reg &= ~H3_EPHY_SHUTDOWN; - dev_dbg(priv->device, "Select internal_phy %x\n", reg); - - if (of_property_read_bool(priv->plat->phy_node, - "allwinner,leds-active-low")) - reg |= H3_EPHY_LED_POL; - else - reg &= ~H3_EPHY_LED_POL; - - /* Force EPHY xtal frequency to 24MHz. */ - reg |= H3_EPHY_CLK_SEL; - - ret = of_mdio_parse_addr(priv->device, - priv->plat->phy_node); - if (ret < 0) { - dev_err(priv->device, "Could not parse MDIO addr\n"); - return ret; - } - /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY - * address. No need to mask it again. - */ - reg |= ret << H3_EPHY_ADDR_SHIFT; + if (gmac->variant->soc_has_internal_phy) { + if (of_property_read_bool(priv->plat->phy_node, + "allwinner,leds-active-low")) + reg |= H3_EPHY_LED_POL; + else + reg &= ~H3_EPHY_LED_POL; + + /* Force EPHY xtal frequency to 24MHz. */ + reg |= H3_EPHY_CLK_SEL; + + ret = of_mdio_parse_addr(priv->device, priv->plat->phy_node); + if (ret < 0) { + dev_err(priv->device, "Could not parse MDIO addr\n"); + return ret; } + /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY + * address. No need to mask it again. + */ + reg |= 1 << H3_EPHY_ADDR_SHIFT; } if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) { @@ -746,81 +895,21 @@ static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac) regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg); } -static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) +static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv) { - struct sunxi_priv_data *gmac = priv->plat->bsp_priv; - int ret; - - if (!gmac->use_internal_phy) - return 0; - - ret = clk_prepare_enable(gmac->ephy_clk); - if (ret) { - dev_err(priv->device, "Cannot enable ephy\n"); - return ret; - } - - /* Make sure the EPHY is properly reseted, as U-Boot may leave - * it at deasserted state, and thus it may fail to reset EMAC. - */ - reset_control_assert(gmac->rst_ephy); + struct sunxi_priv_data *gmac = priv; - ret = reset_control_deassert(gmac->rst_ephy); - if (ret) { - dev_err(priv->device, "Cannot deassert ephy\n"); - clk_disable_unprepare(gmac->ephy_clk); - return ret; + if (gmac->variant->soc_has_internal_phy) { + /* sun8i_dwmac_exit could be called with mdiomux uninit */ + if (gmac->mux_handle) + mdio_mux_uninit(gmac->mux_handle); + if (gmac->internal_phy_powered) + sun8i_dwmac_unpower_internal_phy(gmac); } - return 0; -} - -static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac) -{ - if (!gmac->use_internal_phy) - return 0; - - clk_disable_unprepare(gmac->ephy_clk); - reset_control_assert(gmac->rst_ephy); - return 0; -} - -/* sun8i_power_phy() - Activate the PHY: - * In case of error, no need to call sun8i_unpower_phy(), - * it will be called anyway by sun8i_dwmac_exit() - */ -static int sun8i_power_phy(struct stmmac_priv *priv) -{ - int ret; - - ret = sun8i_dwmac_power_internal_phy(priv); - if (ret) - return ret; - - ret = sun8i_dwmac_set_syscon(priv); - if (ret) - return ret; - - /* After changing syscon value, the MAC need reset or it will use - * the last value (and so the last PHY set. - */ - ret = sun8i_dwmac_reset(priv); - if (ret) - return ret; - return 0; -} - -static void sun8i_unpower_phy(struct sunxi_priv_data *gmac) -{ sun8i_dwmac_unset_syscon(gmac); - sun8i_dwmac_unpower_internal_phy(gmac); -} - -static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv) -{ - struct sunxi_priv_data *gmac = priv; - sun8i_unpower_phy(gmac); + reset_control_put(gmac->rst_ephy); clk_disable_unprepare(gmac->tx_clk); @@ -849,7 +938,7 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv) if (!mac) return NULL; - ret = sun8i_power_phy(priv); + ret = sun8i_dwmac_set_syscon(priv); if (ret) return NULL; @@ -889,6 +978,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev) struct sunxi_priv_data *gmac; struct device *dev = &pdev->dev; int ret; + struct stmmac_priv *priv; + struct net_device *ndev; ret = stmmac_get_platform_resources(pdev, &stmmac_res); if (ret) @@ -932,29 +1023,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev) } plat_dat->interface = of_get_phy_mode(dev->of_node); - if (plat_dat->interface == gmac->variant->internal_phy) { - dev_info(&pdev->dev, "Will use internal PHY\n"); - gmac->use_internal_phy = true; - gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0); - if (IS_ERR(gmac->ephy_clk)) { - ret = PTR_ERR(gmac->ephy_clk); - dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret); - return -EINVAL; - } - - gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL); - if (IS_ERR(gmac->rst_ephy)) { - ret = PTR_ERR(gmac->rst_ephy); - if (ret == -EPROBE_DEFER) - return ret; - dev_err(&pdev->dev, "No EPHY reset control found %d\n", - ret); - return -EINVAL; - } - } else { - dev_info(&pdev->dev, "Will use external PHY\n"); - gmac->use_internal_phy = false; - } /* platform data specifying hardware features and callbacks. * hardware features were copied from Allwinner drivers. @@ -973,9 +1041,34 @@ static int sun8i_dwmac_probe(struct platform_device *pdev) ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); if (ret) - sun8i_dwmac_exit(pdev, plat_dat->bsp_priv); + goto dwmac_exit; + + ndev = dev_get_drvdata(&pdev->dev); + priv = netdev_priv(ndev); + /* The mux must be registered after parent MDIO + * so after stmmac_dvr_probe() + */ + if (gmac->variant->soc_has_internal_phy) { + ret = get_ephy_nodes(priv); + if (ret) + goto dwmac_exit; + ret = sun8i_dwmac_register_mdio_mux(priv); + if (ret) { + dev_err(&pdev->dev, "Failed to register mux\n"); + goto dwmac_mux; + } + } else { + ret = sun8i_dwmac_reset(priv); + if (ret) + goto dwmac_exit; + } return ret; +dwmac_mux: + sun8i_dwmac_unset_syscon(gmac); +dwmac_exit: + sun8i_dwmac_exit(pdev, plat_dat->bsp_priv); +return ret; } static const struct of_device_id sun8i_dwmac_match[] = { |