diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/cs89x0.c | 12 | ||||
| -rw-r--r-- | drivers/net/irda/pxaficp_ir.c | 8 | ||||
| -rw-r--r-- | drivers/net/smc91x.c | 9 | ||||
| -rw-r--r-- | drivers/net/smc91x.h | 13 |
5 files changed, 32 insertions, 18 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 99ae44e256bc..e9d529442b06 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1386,7 +1386,8 @@ config FORCEDETH_NAPI config CS89x0 tristate "CS89x0 support" - depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X) + depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ + || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS) ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1397,6 +1398,11 @@ config CS89x0 To compile this driver as a module, choose M here. The module will be called cs89x0. +config CS89x0_NONISA_IRQ + def_bool y + depends on CS89x0 != n + depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS + config TC35815 tristate "TOSHIBA TC35815 Ethernet support" depends on NET_PCI && PCI && MIPS diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index b0b66766ed27..a28de8182802 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -194,6 +194,12 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; +#elif defined(CONFIG_MACH_MX31ADS) +#include <mach/board-mx31ads.h> +static unsigned int netcard_portlist[] __used __initdata = { + PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0 +}; +static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0}; #else static unsigned int netcard_portlist[] __used __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; @@ -802,7 +808,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } else { i = lp->isa_config & INT_NO_MASK; if (lp->chip_type == CS8900) { -#if defined(CONFIG_MACH_IXDP2351) || defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX010X) +#ifdef CONFIG_CS89x0_NONISA_IRQ i = cs8900_irq_map[0]; #else /* Translate the IRQ using the IRQ mapping table. */ @@ -1029,6 +1035,7 @@ skip_this_frame: void __init reset_chip(struct net_device *dev) { +#if !defined(CONFIG_MACH_MX31ADS) #if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) struct net_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; @@ -1057,6 +1064,7 @@ void __init reset_chip(struct net_device *dev) reset_start_time = jiffies; while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2) ; +#endif /* !CONFIG_MACH_MX31ADS */ } @@ -1304,7 +1312,7 @@ net_open(struct net_device *dev) else #endif { -#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X) +#ifndef CONFIG_CS89x0_NONISA_IRQ if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 4aa61a1a3d55..c5b02b66f756 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -572,8 +572,8 @@ static void pxa_irda_startup(struct pxa_irda *si) ICCR2 = ICCR2_TXP | ICCR2_TRIG_32; /* configure DMAC */ - DRCMR17 = si->rxdma | DRCMR_MAPVLD; - DRCMR18 = si->txdma | DRCMR_MAPVLD; + DRCMR(17) = si->rxdma | DRCMR_MAPVLD; + DRCMR(18) = si->txdma | DRCMR_MAPVLD; /* force SIR reinitialization */ si->speed = 4000000; @@ -602,8 +602,8 @@ static void pxa_irda_shutdown(struct pxa_irda *si) /* disable the STUART or FICP clocks */ pxa_irda_disable_clk(si); - DRCMR17 = 0; - DRCMR18 = 0; + DRCMR(17) = 0; + DRCMR(18) = 0; local_irq_restore(flags); diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index ef5ce8845c9d..c70870e0fd61 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1520,7 +1520,9 @@ smc_open(struct net_device *dev) /* Setup the default Register Modes */ lp->tcr_cur_mode = TCR_DEFAULT; lp->rcr_cur_mode = RCR_DEFAULT; - lp->rpc_cur_mode = RPC_DEFAULT; + lp->rpc_cur_mode = RPC_DEFAULT | + lp->cfg.leda << RPC_LSXA_SHFT | + lp->cfg.ledb << RPC_LSXB_SHFT; /* * If we are not using a MII interface, we need to @@ -2158,6 +2160,11 @@ static int smc_drv_probe(struct platform_device *pdev) lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0; } + if (!lp->cfg.leda && !lp->cfg.ledb) { + lp->cfg.leda = RPC_LSA_DEFAULT; + lp->cfg.ledb = RPC_LSB_DEFAULT; + } + ndev->dma = (unsigned char)-1; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index edea0732f145..a07cc9351c6b 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -43,7 +43,8 @@ #if defined(CONFIG_ARCH_LUBBOCK) ||\ defined(CONFIG_MACH_MAINSTONE) ||\ defined(CONFIG_MACH_ZYLONITE) ||\ - defined(CONFIG_MACH_LITTLETON) + defined(CONFIG_MACH_LITTLETON) ||\ + defined(CONFIG_ARCH_VIPER) #include <asm/mach-types.h> @@ -780,14 +781,6 @@ smc_pxa_dma_irq(int dma, void *dummy) #define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode #define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb #define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb -#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect -#define RPC_LED_RES (0x01) // LED = Reserved -#define RPC_LED_10 (0x02) // LED = 10Mbps link detect -#define RPC_LED_FD (0x03) // LED = Full Duplex Mode -#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred -#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect -#define RPC_LED_TX (0x06) // LED = TX packet occurred -#define RPC_LED_RX (0x07) // LED = RX packet occurred #ifndef RPC_LSA_DEFAULT #define RPC_LSA_DEFAULT RPC_LED_100 @@ -796,7 +789,7 @@ smc_pxa_dma_irq(int dma, void *dummy) #define RPC_LSB_DEFAULT RPC_LED_FD #endif -#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX) +#define RPC_DEFAULT (RPC_ANEG | RPC_SPEED | RPC_DPLX) /* Bank 0 0x0C is reserved */ |