summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Kconfig22
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/igb/Makefile37
-rw-r--r--drivers/net/igb/e1000_82575.c1269
-rw-r--r--drivers/net/igb/e1000_82575.h150
-rw-r--r--drivers/net/igb/e1000_defines.h772
-rw-r--r--drivers/net/igb/e1000_hw.h599
-rw-r--r--drivers/net/igb/e1000_mac.c1505
-rw-r--r--drivers/net/igb/e1000_mac.h98
-rw-r--r--drivers/net/igb/e1000_nvm.c605
-rw-r--r--drivers/net/igb/e1000_nvm.h40
-rw-r--r--drivers/net/igb/e1000_phy.c1807
-rw-r--r--drivers/net/igb/e1000_phy.h98
-rw-r--r--drivers/net/igb/e1000_regs.h270
-rw-r--r--drivers/net/igb/igb.h300
-rw-r--r--drivers/net/igb/igb_ethtool.c1927
-rw-r--r--drivers/net/igb/igb_main.c4138
17 files changed, 13638 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f87d9ff3311a..af40ff434def 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2019,6 +2019,28 @@ config IP1000
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
+config IGB
+ tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82575 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called igb.
+
source "drivers/net/ixp2000/Kconfig"
config MYRI_SBUS
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 79fe3f158af1..9fc7794e88ea 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
+obj-$(CONFIG_IGB) += igb/
obj-$(CONFIG_IXGBE) += ixgbe/
obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IP1000) += ipg.o
diff --git a/drivers/net/igb/Makefile b/drivers/net/igb/Makefile
new file mode 100644
index 000000000000..1927b3fd6f05
--- /dev/null
+++ b/drivers/net/igb/Makefile
@@ -0,0 +1,37 @@
+################################################################################
+#
+# Intel 82575 PCI-Express Ethernet Linux driver
+# Copyright(c) 1999 - 2007 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 82575 PCI-Express ethernet driver
+#
+
+obj-$(CONFIG_IGB) += igb.o
+
+igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \
+ e1000_mac.o e1000_nvm.o e1000_phy.o
+
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
new file mode 100644
index 000000000000..cda3ec879090
--- /dev/null
+++ b/drivers/net/igb/e1000_82575.c
@@ -0,0 +1,1269 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_82575
+ * e1000_82576
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+
+#include "e1000_mac.h"
+#include "e1000_82575.h"
+
+static s32 igb_get_invariants_82575(struct e1000_hw *);
+static s32 igb_acquire_phy_82575(struct e1000_hw *);
+static void igb_release_phy_82575(struct e1000_hw *);
+static s32 igb_acquire_nvm_82575(struct e1000_hw *);
+static void igb_release_nvm_82575(struct e1000_hw *);
+static s32 igb_check_for_link_82575(struct e1000_hw *);
+static s32 igb_get_cfg_done_82575(struct e1000_hw *);
+static s32 igb_init_hw_82575(struct e1000_hw *);
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
+static void igb_rar_set_82575(struct e1000_hw *, u8 *, u32);
+static s32 igb_reset_hw_82575(struct e1000_hw *);
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
+static s32 igb_setup_copper_link_82575(struct e1000_hw *);
+static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *);
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
+static s32 igb_configure_pcs_link_82575(struct e1000_hw *);
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
+ u16 *);
+static s32 igb_get_phy_id_82575(struct e1000_hw *);
+static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
+static bool igb_sgmii_active_82575(struct e1000_hw *);
+static s32 igb_reset_init_script_82575(struct e1000_hw *);
+static s32 igb_read_mac_addr_82575(struct e1000_hw *);
+
+
+struct e1000_dev_spec_82575 {
+ bool sgmii_active;
+};
+
+static s32 igb_get_invariants_82575(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82575 *dev_spec;
+ u32 eecd;
+ s32 ret_val;
+ u16 size;
+ u32 ctrl_ext = 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82575EB_COPPER:
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ mac->type = e1000_82575;
+ break;
+ default:
+ return -E1000_ERR_MAC_INIT;
+ break;
+ }
+
+ /* MAC initialization */
+ hw->dev_spec_size = sizeof(struct e1000_dev_spec_82575);
+
+ /* Device-specific structure allocation */
+ hw->dev_spec = kzalloc(hw->dev_spec_size, GFP_KERNEL);
+
+ if (!hw->dev_spec)
+ return -ENOMEM;
+
+ dev_spec = (struct e1000_dev_spec_82575 *)hw->dev_spec;
+
+ /* Set media type */
+ /*
+ * The 82575 uses bits 22:23 for link mode. The mode can be changed
+ * based on the EEPROM. We cannot rely upon device ID. There
+ * is no distinguishable difference between fiber and internal
+ * SerDes mode on the 82575. There can be an external PHY attached
+ * on the SGMII interface. For this, we'll set sgmii_active to true.
+ */
+ phy->media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = false;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ if ((ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) ==
+ E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES) {
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ } else if (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII) {
+ dev_spec->sgmii_active = true;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ } else {
+ ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+ }
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
+ /* Set if part includes ASF firmware */
+ mac->asf_firmware_present = true;
+ /* Set if manageability features are enabled. */
+ mac->arc_subsystem_valid =
+ (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+
+ /* physical interface link setup */
+ mac->ops.setup_physical_interface =
+ (hw->phy.media_type == e1000_media_type_copper)
+ ? igb_setup_copper_link_82575
+ : igb_setup_fiber_serdes_link_82575;
+
+ /* NVM initialization */
+ eecd = rd32(E1000_EECD);
+
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
+ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
+ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+ break;
+ }
+
+ nvm->type = e1000_nvm_eeprom_spi;
+
+ size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+
+ /*
+ * Added to a constant, "size" becomes the left-shift value
+ * for setting word_size.
+ */
+ size += NVM_WORD_SIZE_BASE_SHIFT;
+ nvm->word_size = 1 << size;
+
+ /* setup PHY parameters */
+ if (phy->media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ return 0;
+ }
+
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
+
+ /* PHY function pointers */
+ if (igb_sgmii_active_82575(hw)) {
+ phy->ops.reset_phy = igb_phy_hw_reset_sgmii_82575;
+ phy->ops.read_phy_reg = igb_read_phy_reg_sgmii_82575;
+ phy->ops.write_phy_reg = igb_write_phy_reg_sgmii_82575;
+ } else {
+ phy->ops.reset_phy = igb_phy_hw_reset;
+ phy->ops.read_phy_reg = igb_read_phy_reg_igp;
+ phy->ops.write_phy_reg = igb_write_phy_reg_igp;
+ }
+
+ /* Set phy->phy_addr and phy->id. */
+ ret_val = igb_get_phy_id_82575(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Verify phy id and set remaining function pointers */
+ switch (phy->id) {
+ case M88E1111_I_PHY_ID:
+ phy->type = e1000_phy_m88;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+ phy->ops.get_cable_length = igb_get_cable_length_m88;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ break;
+ case IGP03E1000_E_PHY_ID:
+ phy->type = e1000_phy_igp_3;
+ phy->ops.get_phy_info = igb_get_phy_info_igp;
+ phy->ops.get_cable_length = igb_get_cable_length_igp_2;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_acquire_phy_82575 - Acquire rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * Acquire access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
+{
+ u16 mask;
+
+ mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+
+ return igb_acquire_swfw_sync_82575(hw, mask);
+}
+
+/**
+ * e1000_release_phy_82575 - Release rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * A wrapper to release access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ **/
+static void igb_release_phy_82575(struct e1000_hw *hw)
+{
+ u16 mask;
+
+ mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+ igb_release_swfw_sync_82575(hw, mask);
+}
+
+/**
+ * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the serial gigabit media independent
+ * interface and stores the retrieved information in data.
+ **/
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+ u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, i2ccmd = 0;
+
+ if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+ hw_dbg(hw, "PHY Address %u is out of range\n", offset);
+ return -E1000_ERR_PARAM;
+ }
+
+ /*
+ * Set up Op-code, Phy Address, and register address in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+ (E1000_I2CCMD_OPCODE_READ));
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ i2ccmd = rd32(E1000_I2CCMD);
+ if (i2ccmd & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(i2ccmd & E1000_I2CCMD_READY)) {
+ hw_dbg(hw, "I2CCMD Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (i2ccmd & E1000_I2CCMD_ERROR) {
+ hw_dbg(hw, "I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Need to byte-swap the 16-bit value. */
+ *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+ return 0;
+}
+
+/**
+ * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset using the serial gigabit
+ * media independent interface.
+ **/
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+ u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, i2ccmd = 0;
+ u16 phy_data_swapped;
+
+ if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+ hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+ return -E1000_ERR_PARAM;
+ }
+
+ /* Swap the data bytes for the I2C interface */
+ phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+ /*
+ * Set up Op-code, Phy Address, and register address in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+ E1000_I2CCMD_OPCODE_WRITE |
+ phy_data_swapped);
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ i2ccmd = rd32(E1000_I2CCMD);
+ if (i2ccmd & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(i2ccmd & E1000_I2CCMD_READY)) {
+ hw_dbg(hw, "I2CCMD Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (i2ccmd & E1000_I2CCMD_ERROR) {
+ hw_dbg(hw, "I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_get_phy_id_82575 - Retreive PHY addr and id
+ * @hw: pointer to the HW structure
+ *
+ * Retreives the PHY address and ID for both PHY's which do and do not use
+ * sgmi interface.
+ **/
+static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+
+ /*
+ * For SGMII PHYs, we try the list of possible addresses until
+ * we find one that works. For non-SGMII PHYs
+ * (e.g. integrated copper PHYs), an address of 1 should
+ * work. The result of this function should mean phy->phy_addr
+ * and phy->id are set correctly.
+ */
+ if (!(igb_sgmii_active_82575(hw))) {
+ phy->addr = 1;
+ ret_val = igb_get_phy_id(hw);
+ goto out;
+ }
+
+ /*
+ * The address field in the I2CCMD register is 3 bits and 0 is invalid.
+ * Therefore, we need to test 1-7
+ */
+ for (phy->addr = 1; phy->addr < 8; phy->addr++) {
+ ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
+ if (ret_val == 0) {
+ hw_dbg(hw, "Vendor ID 0x%08X read at address %u\n",
+ phy_id,
+ phy->addr);
+ /*
+ * At the time of this writing, The M88 part is
+ * the only supported SGMII PHY product.
+ */
+ if (phy_id == M88_VENDOR)
+ break;
+ } else {
+ hw_dbg(hw, "PHY address %u was unreadable\n",
+ phy->addr);
+ }
+ }
+
+ /* A valid PHY type couldn't be found. */
+ if (phy->addr == 8) {
+ phy->addr = 0;
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ ret_val = igb_get_phy_id(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset
+ * @hw: pointer to the HW structure
+ *
+ * Resets the PHY using the serial gigabit media independent interface.
+ **/
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ /*
+ * This isn't a true "hard" reset, but is the only reset
+ * available to us at this time.
+ */
+
+ hw_dbg(hw, "Soft resetting SGMII attached PHY...\n");
+
+ /*
+ * SFP documentation requires the following to configure the SPF module
+ * to work on SGMII. No further documentation is given.
+ */
+ ret_val = hw->phy.ops.write_phy_reg(hw, 0x1B, 0x8084);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_phy_sw_reset(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When
+ * activating LPLU this function also disables smart speed
+ * and vice versa. LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ &data);
+ if (ret_val)
+ goto out;
+
+ if (active) {
+ data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else {
+ data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP02E1000_PHY_POWER_MGMT,
+ data);
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_acquire_nvm_82575 - Request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the necessary semaphores for exclussive access to the EEPROM.
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = igb_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_acquire_nvm(hw);
+
+ if (ret_val)
+ igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_release_nvm_82575 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ * then release the semaphores acquired.
+ **/
+static void igb_release_nvm_82575(struct e1000_hw *hw)
+{
+ igb_release_nvm(hw);
+ igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
+ * will also specify which port we're acquiring the lock for.
+ **/
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 ret_val = 0;
+ s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+ while (i < timeout) {
+ if (igb_get_hw_semaphore(hw)) {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask)))
+ break;
+
+ /*
+ * Firmware currently using resource (fwmask)
+ * or other software thread using resource (swmask)
+ */
+ igb_put_hw_semaphore(hw);
+ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg(hw, "Can't access resource, SW_FW_SYNC timeout.\n");
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync |= swmask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_release_swfw_sync_82575 - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM. The mask
+ * will also specify which port we're releasing the lock for.
+ **/
+static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+
+ while (igb_get_hw_semaphore(hw) != 0);
+ /* Empty */
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ swfw_sync &= ~mask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+}
+
+/**
+ * e1000_get_cfg_done_82575 - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ * Read the management control register for the config done bit for
+ * completion status. NOTE: silicon which is EEPROM-less will fail trying
+ * to read the config done bit, so an error is *ONLY* logged and returns
+ * 0. If we were to return with error, EEPROM-less silicon
+ * would not be able to be reset or change link.
+ **/
+static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ s32 ret_val = 0;
+ u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+ if (hw->bus.func == 1)
+ mask = E1000_NVM_CFG_DONE_PORT_1;
+
+ while (timeout) {
+ if (rd32(E1000_EEMNGCTL) & mask)
+ break;
+ msleep(1);
+ timeout--;
+ }
+ if (!timeout)
+ hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+
+ /* If EEPROM is not marked present, init the PHY manually */
+ if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) &&
+ (hw->phy.type == e1000_phy_igp_3))
+ igb_phy_init_script_igp3(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_link_82575 - Check for link
+ * @hw: pointer to the HW structure
+ *
+ * If sgmii is enabled, then use the pcs register to determine link, otherwise
+ * use the generic interface for determining link.
+ **/
+static s32 igb_check_for_link_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 speed, duplex;
+
+ /* SGMII link check is done through the PCS register. */
+ if ((hw->phy.media_type != e1000_media_type_copper) ||
+ (igb_sgmii_active_82575(hw)))
+ ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
+ &duplex);
+ else
+ ret_val = igb_check_for_copper_link(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Using the physical coding sub-layer (PCS), retreive the current speed and
+ * duplex, then store the values in the pointers provided.
+ **/
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 pcs;
+
+ /* Set up defaults for the return values of this function */
+ mac->serdes_has_link = false;
+ *speed = 0;
+ *duplex = 0;
+
+ /*
+ * Read the PCS Status register for link state. For non-copper mode,
+ * the status register is not accurate. The PCS status register is
+ * used instead.
+ */
+ pcs = rd32(E1000_PCS_LSTAT);
+
+ /*
+ * The link up bit determines when link is up on autoneg. The sync ok
+ * gets set once both sides sync up and agree upon link. Stable link
+ * can be determined by checking for both link up and link sync ok
+ */
+ if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) {
+ mac->serdes_has_link = true;
+
+ /* Detect and store PCS speed */
+ if (pcs & E1000_PCS_LSTS_SPEED_1000) {
+ *speed = SPEED_1000;
+ } else if (pcs & E1000_PCS_LSTS_SPEED_100) {
+ *speed = SPEED_100;
+ } else {
+ *speed = SPEED_10;
+ }
+
+ /* Detect and store PCS duplex */
+ if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) {
+ *duplex = FULL_DUPLEX;
+ } else {
+ *duplex = HALF_DUPLEX;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_rar_set_82575 - Set receive address register
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ *
+ * Sets the receive address array register at index to the address passed
+ * in by addr.
+ **/
+static void igb_rar_set_82575(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ if (index < E1000_RAR_ENTRIES_82575)
+ igb_rar_set(hw, addr, index);
+
+ return;
+}
+
+/**
+ * e1000_reset_hw_82575 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32 igb_reset_hw_82575(struct e1000_hw *hw)
+{
+ u32 ctrl, icr;
+ s32 ret_val;
+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igb_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+
+ hw_dbg(hw, "Masking off all interrupts\n");
+ wr32(E1000_IMC, 0xffffffff);
+
+ wr32(E1000_RCTL, 0);
+ wr32(E1000_TCTL, E1000_TCTL_PSP);
+ wrfl();
+
+ msleep(10);
+
+ ctrl = rd32(E1000_CTRL);
+
+ hw_dbg(hw, "Issuing a global reset to MAC\n");
+ wr32(E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+ ret_val = igb_get_auto_rd_done(hw);
+ if (ret_val) {
+ /*
+ * When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg(hw, "Auto Read Done did not complete\n");
+ }
+
+ /* If EEPROM is not present, run manual init scripts */
+ if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+ igb_reset_init_script_82575(hw);
+
+ /* Clear any pending interrupt events. */
+ wr32(E1000_IMC, 0xffffffff);
+ icr = rd32(E1000_ICR);
+
+ igb_check_alt_mac_addr(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_hw_82575 - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation.
+ **/
+static s32 igb_init_hw_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ u16 i, rar_count = mac->rar_entry_count;
+
+ /* Initialize identification LED */
+ ret_val = igb_id_led_init(hw);
+ if (ret_val) {
+ hw_dbg(hw, "Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+ }
+
+ /* Disabling VLAN filtering */
+ hw_dbg(hw, "Initializing the IEEE VLAN\n");
+ igb_clear_vfta(hw);
+
+ /* Setup the receive address */
+ igb_init_rx_addrs(hw, rar_count);
+ /* Zero out the Multicast HASH table */
+ hw_dbg(hw, "Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ array_wr32(E1000_MTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = igb_setup_link(hw);
+
+ /*
+ * Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ igb_clear_hw_cntrs_82575(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_setup_copper_link_82575 - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Configures the link for auto-neg or forced speed and duplex. Then we check
+ * for link, once link is established calls to configure collision distance
+ * and flow control are called.
+ **/
+static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
+{
+ u32 ctrl, led_ctrl;
+ s32 ret_val;
+ bool link;
+
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ wr32(E1000_CTRL, ctrl);
+
+ switch (hw->phy.type) {
+ case e1000_phy_m88:
+ ret_val = igb_copper_link_setup_m88(hw);
+ break;
+ case e1000_phy_igp_3:
+ ret_val = igb_copper_link_setup_igp(hw);
+ /* Setup activity LED */
+ led_ctrl = rd32(E1000_LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ wr32(E1000_LEDCTL, led_ctrl);
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ break;
+ }
+
+ if (ret_val)
+ goto out;
+
+ if (hw->mac.autoneg) {
+ /*
+ * Setup autoneg and flow control advertisement
+ * and perform autonegotiation.
+ */
+ ret_val = igb_copper_link_autoneg(hw);
+ if (ret_val)
+ goto out;
+ } else {
+ /*
+ * PHY will be set to 10H, 10F, 100H or 100F
+ * depending on user settings.
+ */
+ hw_dbg(hw, "Forcing Speed and Duplex\n");
+ ret_val = igb_phy_force_speed_duplex(hw);
+ if (ret_val) {
+ hw_dbg(hw, "Error Forcing Speed and Duplex\n");
+ goto out;
+ }
+ }
+
+ ret_val = igb_configure_pcs_link_82575(hw);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ ret_val = igb_phy_has_link(hw,
+ COPPER_LINK_UP_LIMIT,
+ 10,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (link) {
+ hw_dbg(hw, "Valid link established!!!\n");
+ /* Config the MAC and PHY after link is up */
+ igb_config_collision_dist(hw);
+ ret_val = igb_config_fc_after_link_up(hw);
+ } else {
+ hw_dbg(hw, "Unable to establish link!!!\n");
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes
+ * @hw: pointer to the HW structure
+ *
+ * Configures speed and duplex for fiber and serdes links.
+ **/
+static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 reg;
+
+ /*
+ * On the 82575, SerDes loopback mode persists until it is
+ * explicitly turned off or a power cycle is performed. A read to
+ * the register does not indicate its status. Therefore, we ensure
+ * loopback mode is disabled during initialization.
+ */
+ wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+
+ /* Force link up, set 1gb, set both sw defined pins */
+ reg = rd32(E1000_CTRL);
+ reg |= E1000_CTRL_SLU |
+ E1000_CTRL_SPD_1000 |
+ E1000_CTRL_FRCSPD |
+ E1000_CTRL_SWDPIN0 |
+ E1000_CTRL_SWDPIN1;
+ wr32(E1000_CTRL, reg);
+
+ /* Set switch control to serdes energy detect */
+ reg = rd32(E1000_CONNSW);
+ reg |= E1000_CONNSW_ENRGSRC;
+ wr32(E1000_CONNSW, reg);
+
+ /*
+ * New SerDes mode allows for forcing speed or autonegotiating speed
+ * at 1gb. Autoneg should be default set by most drivers. This is the
+ * mode that will be compatible with older link partners and switches.
+ * However, both are supported by the hardware and some drivers/tools.
+ */
+ reg = rd32(E1000_PCS_LCTL);
+
+ reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
+ E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
+
+ if (hw->mac.autoneg) {
+ /* Set PCS register for autoneg */
+ reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
+ E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
+ E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
+ hw_dbg(hw, "Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg);
+ } else {
+ /* Set PCS register for forced speed */
+ reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */
+ E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
+ E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
+ E1000_PCS_LCTL_FSD | /* Force Speed */
+ E1000_PCS_LCTL_FORCE_LINK; /* Force Link */
+ hw_dbg(hw, "Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
+ }
+ wr32(E1000_PCS_LCTL, reg);
+
+ return 0;
+}
+
+/**
+ * e1000_configure_pcs_link_82575 - Configure PCS link
+ * @hw: pointer to the HW structure
+ *
+ * Configure the physical coding sub-layer (PCS) link. The PCS link is
+ * only used on copper connections where the serialized gigabit media
+ * independent interface (sgmii) is being used. Configures the link
+ * for auto-negotiation or forces speed/duplex.
+ **/
+static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 reg = 0;
+
+ if (hw->phy.media_type != e1000_media_type_copper ||
+ !(igb_sgmii_active_82575(hw)))
+ goto out;
+
+ /* For SGMII, we need to issue a PCS autoneg restart */
+ reg = rd32(E1000_PCS_LCTL);
+
+ /* AN time out should be disabled for SGMII mode */
+ reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
+
+ if (mac->autoneg) {
+ /* Make sure forced speed and force link are not set */
+ reg &= ~(E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
+
+ /*
+ * The PHY should be setup prior to calling this function.
+ * All we need to do is restart autoneg and enable autoneg.
+ */
+ reg |= E1000_PCS_LCTL_AN_RESTART | E1000_PCS_LCTL_AN_ENABLE;
+ } else {
+ /* Set PCS regiseter for forced speed */
+
+ /* Turn off bits for full duplex, speed, and autoneg */
+ reg &= ~(E1000_PCS_LCTL_FSV_1000 |
+ E1000_PCS_LCTL_FSV_100 |
+ E1000_PCS_LCTL_FDV_FULL |
+ E1000_PCS_LCTL_AN_ENABLE);
+
+ /* Check for duplex first */
+ if (mac->forced_speed_duplex & E1000_ALL_FULL_DUPLEX)
+ reg |= E1000_PCS_LCTL_FDV_FULL;
+
+ /* Now set speed */
+ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED)
+ reg |= E1000_PCS_LCTL_FSV_100;
+
+ /* Force speed and force link */
+ reg |= E1000_PCS_LCTL_FSD |
+ E1000_PCS_LCTL_FORCE_LINK |
+ E1000_PCS_LCTL_FLV_LINK_UP;
+
+ hw_dbg(hw,
+ "Wrote 0x%08X to PCS_LCTL to configure forced link\n",
+ reg);
+ }
+ wr32(E1000_PCS_LCTL, reg);
+
+out:
+ return 0;
+}
+
+/**
+ * e1000_sgmii_active_82575 - Return sgmii state
+ * @hw: pointer to the HW structure
+ *
+ * 82575 silicon has a serialized gigabit media independent interface (sgmii)
+ * which can be enabled for use in the embedded applications. Simply
+ * return the current state of the sgmii interface.
+ **/
+static bool igb_sgmii_active_82575(struct e1000_hw *hw)
+{
+ struct e1000_dev_spec_82575 *dev_spec;
+ bool ret_val;
+
+ if (hw->mac.type != e1000_82575) {
+ ret_val = false;
+ goto out;
+ }
+
+ dev_spec = (struct e1000_dev_spec_82575 *)hw->dev_spec;
+
+ ret_val = dev_spec->sgmii_active;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_reset_init_script_82575 - Inits HW defaults after reset
+ * @hw: pointer to the HW structure
+ *
+ * Inits recommended HW defaults after a reset when there is no EEPROM
+ * detected. This is only for the 82575.
+ **/
+static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
+{
+ if (hw->mac.type == e1000_82575) {
+ hw_dbg(hw, "Running reset init script for 82575\n");
+ /* SerDes configuration via SERDESCTRL */
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15);
+
+ /* CCM configuration via CCMCTL register */
+ igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00);
+ igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00);
+
+ /* PCIe lanes configuration */
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81);
+
+ /* PCIe PLL Configuration */
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_read_mac_addr_82575 - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (igb_check_alt_mac_addr(hw))
+ ret_val = igb_read_mac_addr(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the hardware counters by reading the counter registers.
+ **/
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
+{
+ u32 temp;
+
+ igb_clear_hw_cntrs_base(hw);
+
+ temp = rd32(E1000_PRC64);
+ temp = rd32(E1000_PRC127);
+ temp = rd32(E1000_PRC255);
+ temp = rd32(E1000_PRC511);
+ temp = rd32(E1000_PRC1023);
+ temp = rd32(E1000_PRC1522);
+ temp = rd32(E1000_PTC64);
+ temp = rd32(E1000_PTC127);
+ temp = rd32(E1000_PTC255);
+ temp = rd32(E1000_PTC511);
+ temp = rd32(E1000_PTC1023);
+ temp = rd32(E1000_PTC1522);
+
+ temp = rd32(E1000_ALGNERRC);
+ temp = rd32(E1000_RXERRC);
+ temp = rd32(E1000_TNCRS);
+ temp = rd32(E1000_CEXTERR);
+ temp = rd32(E1000_TSCTC);
+ temp = rd32(E1000_TSCTFC);
+
+ temp = rd32(E1000_MGTPRC);
+ temp = rd32(E1000_MGTPDC);
+ temp = rd32(E1000_MGTPTC);
+
+ temp = rd32(E1000_IAC);
+ temp = rd32(E1000_ICRXOC);
+
+ temp = rd32(E1000_ICRXPTC);
+ temp = rd32(E1000_ICRXATC);
+ temp = rd32(E1000_ICTXPTC);
+ temp = rd32(E1000_ICTXATC);
+ temp = rd32(E1000_ICTXQEC);
+ temp = rd32(E1000_ICTXQMTC);
+ temp = rd32(E1000_ICRXDMTC);
+
+ temp = rd32(E1000_CBTMPC);
+ temp = rd32(E1000_HTDPMC);
+ temp = rd32(E1000_CBRMPC);
+ temp = rd32(E1000_RPTHC);
+ temp = rd32(E1000_HGPTC);
+ temp = rd32(E1000_HTCBDPC);
+ temp = rd32(E1000_HGORCL);
+ temp = rd32(E1000_HGORCH);
+ temp = rd32(E1000_HGOTCL);
+ temp = rd32(E1000_HGOTCH);
+ temp = rd32(E1000_LENERRS);
+
+ /* This register should not be read in copper configurations */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
+ temp = rd32(E1000_SCVPC);
+}
+
+static struct e1000_mac_operations e1000_mac_ops_82575 = {
+ .reset_hw = igb_reset_hw_82575,
+ .init_hw = igb_init_hw_82575,
+ .check_for_link = igb_check_for_link_82575,
+ .rar_set = igb_rar_set_82575,
+ .read_mac_addr = igb_read_mac_addr_82575,
+ .get_speed_and_duplex = igb_get_speed_and_duplex_copper,
+};
+
+static struct e1000_phy_operations e1000_phy_ops_82575 = {
+ .acquire_phy = igb_acquire_phy_82575,
+ .get_cfg_done = igb_get_cfg_done_82575,
+ .release_phy = igb_release_phy_82575,
+};
+
+static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
+ .acquire_nvm = igb_acquire_nvm_82575,
+ .read_nvm = igb_read_nvm_eerd,
+ .release_nvm = igb_release_nvm_82575,
+ .write_nvm = igb_write_nvm_spi,
+};
+
+const struct e1000_info e1000_82575_info = {
+ .get_invariants = igb_get_invariants_82575,
+ .mac_ops = &e1000_mac_ops_82575,
+ .phy_ops = &e1000_phy_ops_82575,
+ .nvm_ops = &e1000_nvm_ops_82575,
+};
+
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
new file mode 100644
index 000000000000..6604d96bd567
--- /dev/null
+++ b/drivers/net/igb/e1000_82575.h
@@ -0,0 +1,150 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_82575_H_
+#define _E1000_82575_H_
+
+#define E1000_RAR_ENTRIES_82575 16
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+
+#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002
+#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
+
+#define E1000_EICR_TX_QUEUE ( \
+ E1000_EICR_TX_QUEUE0 | \
+ E1000_EICR_TX_QUEUE1 | \
+ E1000_EICR_TX_QUEUE2 | \
+ E1000_EICR_TX_QUEUE3)
+
+#define E1000_EICR_RX_QUEUE ( \
+ E1000_EICR_RX_QUEUE0 | \
+ E1000_EICR_RX_QUEUE1 | \
+ E1000_EICR_RX_QUEUE2 | \
+ E1000_EICR_RX_QUEUE3)
+
+#define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE
+#define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE
+
+/* Immediate Interrupt RX (A.K.A. Low Latency Interrupt) */
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+ struct {
+ u64 pkt_addr; /* Packet buffer address */
+ u64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ struct {
+ u16 pkt_info; /* RSS type, Packet type */
+ u16 hdr_info; /* Split Header,
+ * header buffer length */
+ } lo_dword;
+ union {
+ u32 rss; /* RSS Hash */
+ struct {
+ u16 ip_id; /* IP id */
+ u16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ u32 status_error; /* ext status/error */
+ u16 length; /* Packet length */
+ u16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+
+/* RSS Hash results */
+
+/* RSS Packet Types as indicated in the receive descriptor */
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+ struct {
+ u64 buffer_addr; /* Address of descriptor's data buf */
+ u32 cmd_type_len;
+ u32 olinfo_status;
+ } read;
+ struct {
+ u64 rsvd; /* Reserved */
+ u32 nxtseq_seed;
+ u32 status;
+ } wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+ u32 vlan_macip_lens;
+ u32 seqnum_seed;
+ u32 type_tucmd_mlhl;
+ u32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+/* IPSec Encrypt Enable for ESP */
+#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+/* Adv ctxt IPSec SA IDX mask */
+/* Adv ctxt IPSec ESP len mask */
+
+/* Additional Transmit Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
+/* Tx Queue Arbitration Priority 0=low, 1=high */
+
+/* Additional Receive Descriptor Control definitions */
+#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
+
+/* Direct Cache Access (DCA) definitions */
+
+
+
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* TX Desc writeback RO bit */
+
+#endif
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
new file mode 100644
index 000000000000..8da9ffedc425
--- /dev/null
+++ b/drivers/net/igb/e1000_defines.h
@@ -0,0 +1,772 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Wake Up Status */
+
+/* Wake Up Packet Length */
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IRCA 0x00000001
+/* Interrupt delay cancellation */
+/* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000
+/* Interrupt acknowledge Auto-mask */
+/* Clear Interrupt timers after IMS clear */
+/* packet buffer parity error detection enabled */
+/* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_I2CCMD_REG_ADDR_SHIFT 16
+#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
+#define E1000_I2CCMD_OPCODE_READ 0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE 0x00000000
+#define E1000_I2CCMD_READY 0x20000000
+#define E1000_I2CCMD_ERROR 0x80000000
+#define E1000_MAX_SGMII_PHY_REG_ADDR 255
+#define E1000_I2CCMD_PHY_TIMEOUT 200
+
+/* Receive Decriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+/* Enable Neighbor Discovery Filtering */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
+/* Enable MNG packets to host memory */
+#define E1000_MANC_EN_MNG2HOST 0x00200000
+/* Enable IP address filtering */
+
+
+/* Receive Control */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+
+/*
+ * Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM 0x1
+#define E1000_SWFW_PHY0_SM 0x2
+#define E1000_SWFW_PHY1_SM 0x4
+
+/* FACTPS Definitions */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+/* Defined polarity of Dock/Undock indication in SDP[0] */
+/* Reset both PHY ports, through PHYRST_N pin */
+/* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+/* Initiate an interrupt to manageability engine */
+#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+
+#define E1000_CONNSW_ENRGSRC 0x4
+#define E1000_PCS_LCTL_FLV_LINK_UP 1
+#define E1000_PCS_LCTL_FSV_100 2
+#define E1000_PCS_LCTL_FSV_1000 4
+#define E1000_PCS_LCTL_FDV_FULL 8
+#define E1000_PCS_LCTL_FSD 0x10
+#define E1000_PCS_LCTL_FORCE_LINK 0x20
+#define E1000_PCS_LCTL_AN_ENABLE 0x10000
+#define E1000_PCS_LCTL_AN_RESTART 0x20000
+#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000
+
+#define E1000_PCS_LSTS_LINK_OK 1
+#define E1000_PCS_LSTS_SPEED_100 2
+#define E1000_PCS_LSTS_SPEED_1000 4
+#define E1000_PCS_LSTS_DUPLEX_FULL 8
+#define E1000_PCS_LSTS_SYNK_OK 0x10
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+/* Change in Dock/Undock state. Clear on write '0'. */
+/* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
+/* BMC external code execution disabled */
+
+/* Constants used to intrepret the masked PCI-X bus speed. */
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL 0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_FULL_DUPLEX (ADVERTISE_10_FULL | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+/* Extended desc bits for Linksec and timesync */
+
+/* Transmit Control */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+
+/* Transmit Arbitration Count */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Header split receive */
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLD_SHIFT 12
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* Extended Configuration Control and Size */
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+
+/* PBA constants */
+#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_34K 0x0022
+
+#define IFS_MAX 80
+#define IFS_MIN 40
+#define IFS_RATIO 4
+#define IFS_STEP 10
+#define MIN_NUM_XMITS 1000
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000
+/* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000
+/* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000
+/* host arb read buffer parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+/* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000
+/* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000
+/* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_DSW 0x00000020
+/* LAN connected device generates an interrupt */
+#define E1000_ICR_PHYINT 0x00001000
+#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */
+
+/* Extended Interrupt Cause Read */
+#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */
+#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */
+#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */
+#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */
+#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */
+#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */
+#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */
+#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */
+#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */
+#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
+/* TCP Timer */
+
+/*
+ * This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+/* queue 0 Rx descriptor FIFO parity error */
+/* queue 0 Tx descriptor FIFO parity error */
+/* host arb read buffer parity error */
+/* packet buffer parity error */
+/* queue 1 Rx descriptor FIFO parity error */
+/* queue 1 Tx descriptor FIFO parity error */
+
+/* Extended Interrupt Mask Set */
+#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */
+#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+/* queue 0 Rx descriptor FIFO parity error */
+/* queue 0 Tx descriptor FIFO parity error */
+/* host arb read buffer parity error */
+/* packet buffer parity error */
+/* queue 1 Rx descriptor FIFO parity error */
+/* queue 1 Tx descriptor FIFO parity error */
+
+/* Extended Interrupt Cause Set */
+
+/* Transmit Descriptor Control */
+/* Enable the counting of descriptors still to be processed. */
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address */
+/*
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots. However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+
+/* Error Codes */
+#define E1000_ERR_NVM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define COPPER_LINK_UP_LIMIT 10
+#define PHY_AUTO_NEG_LIMIT 45
+#define PHY_FORCE_LIMIT 20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT 10
+
+/* Flow Control */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Transmit Configuration Word */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+
+/* PCI Express Control */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+
+#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
+
+/* PHY Control Register */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+
+/* Autoneg Expansion Register */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Regiser */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+
+/* NVM Control */
+#define E1000_EECD_SK 0x00000001 /* NVM Clock */
+#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* NVM Data In */
+#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
+#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* NVM Present */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+
+/* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA 16
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
+
+/* NVM Word Offsets */
+#define NVM_ID_LED_SETTINGS 0x0004
+/* For SERDES output amplitude adjustment. */
+#define NVM_INIT_CONTROL2_REG 0x000F
+#define NVM_INIT_CONTROL3_PORT_A 0x0024
+#define NVM_ALT_MAC_ADDR_PTR 0x0037
+#define NVM_CHECKSUM_REG 0x003F
+
+#define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK 0x3000
+#define NVM_WORD0F_ASM_DIR 0x2000
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM 0xBABA
+
+#define NVM_PBA_OFFSET_0 8
+#define NVM_PBA_OFFSET_1 9
+#define NVM_WORD_SIZE_BASE_SHIFT 6
+
+/* NVM Commands - Microwire */
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
+#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI 0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCI_HEADER_TYPE_REGISTER 0x0E
+#define PCIE_LINK_STATUS 0x12
+
+#define PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define PCIE_LINK_WIDTH_MASK 0x3F0
+#define PCIE_LINK_WIDTH_SHIFT 4
+
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
+
+/* Bit definitions for valid PHY IDs. */
+/*
+ * I = Integrated
+ * E = External
+ */
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define M88_VENDOR 0x0141
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+/* 1=CLK125 low, 0=CLK125 toggling */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060
+/*
+ * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold
+ * 0=Normal 10BASE-T RX Threshold
+ */
+/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+/*
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+/*
+ * 1 = Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+
+/* MDI Control */
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_ERROR 0x40000000
+
+/* SerDes Control */
+#define E1000_GEN_CTL_READY 0x80000000
+#define E1000_GEN_CTL_ADDRESS_SHIFT 8
+#define E1000_GEN_POLL_TIMEOUT 640
+
+#endif
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
new file mode 100644
index 000000000000..161fb68764af
--- /dev/null
+++ b/drivers/net/igb/e1000_hw.h
@@ -0,0 +1,599 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "e1000_mac.h"
+#include "e1000_regs.h"
+#include "e1000_defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82575EB_COPPER 0x10A7
+#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9
+#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6
+
+#define E1000_REVISION_2 2
+#define E1000_REVISION_4 4
+
+#define E1000_FUNC_1 1
+
+enum e1000_mac_type {
+ e1000_undefined = 0,
+ e1000_82575,
+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
+};
+
+enum e1000_media_type {
+ e1000_media_type_unknown = 0,
+ e1000_media_type_copper = 1,
+ e1000_media_type_fiber = 2,
+ e1000_media_type_internal_serdes = 3,
+ e1000_num_media_types
+};
+
+enum e1000_nvm_type {
+ e1000_nvm_unknown = 0,
+ e1000_nvm_none,
+ e1000_nvm_eeprom_spi,
+ e1000_nvm_eeprom_microwire,
+ e1000_nvm_flash_hw,
+ e1000_nvm_flash_sw
+};
+
+enum e1000_nvm_override {
+ e1000_nvm_override_none = 0,
+ e1000_nvm_override_spi_small,
+ e1000_nvm_override_spi_large,
+ e1000_nvm_override_microwire_small,
+ e1000_nvm_override_microwire_large
+};
+
+enum e1000_phy_type {
+ e1000_phy_unknown = 0,
+ e1000_phy_none,
+ e1000_phy_m88,
+ e1000_phy_igp,
+ e1000_phy_igp_2,
+ e1000_phy_gg82563,
+ e1000_phy_igp_3,
+ e1000_phy_ife,
+};
+
+enum e1000_bus_type {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
+ e1000_bus_type_reserved
+};
+
+enum e1000_bus_speed {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_2500,
+ e1000_bus_speed_5000,
+ e1000_bus_speed_reserved
+};
+
+enum e1000_bus_width {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_pcie_x1,
+ e1000_bus_width_pcie_x2,
+ e1000_bus_width_pcie_x4 = 4,
+ e1000_bus_width_pcie_x8 = 8,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+};
+
+enum e1000_1000t_rx_status {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+};
+
+enum e1000_rev_polarity {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+};
+
+enum e1000_fc_type {
+ e1000_fc_none = 0,
+ e1000_fc_rx_pause,
+ e1000_fc_tx_pause,
+ e1000_fc_full,
+ e1000_fc_default = 0xFF
+};
+
+
+/* Receive Descriptor */
+struct e1000_rx_desc {
+ u64 buffer_addr; /* Address of the descriptor's data buffer */
+ u16 length; /* Length of data DMAed into data buffer */
+ u16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ u16 special;
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+ struct {
+ u64 buffer_addr;
+ u64 reserved;
+ } read;
+ struct {
+ struct {
+ u32 mrq; /* Multiple Rx Queues */
+ union {
+ u32 rss; /* RSS Hash */
+ struct {
+ u16 ip_id; /* IP id */
+ u16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ u32 status_error; /* ext status/error */
+ u16 length;
+ u16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ u64 buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ u32 mrq; /* Multiple Rx Queues */
+ union {
+ u32 rss; /* RSS Hash */
+ struct {
+ u16 ip_id; /* IP id */
+ u16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ u32 status_error; /* ext status/error */
+ u16 length0; /* length of buffer 0 */
+ u16 vlan; /* VLAN tag */
+ } middle;
+ struct {
+ u16 header_status;
+ u16 length[3]; /* length of buffers 1-3 */
+ } upper;
+ u64 reserved;
+ } wb; /* writeback */
+};
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+ u64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ u32 data;
+ struct {
+ u16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ u32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ u16 special;
+ } fields;
+ } upper;
+};
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+ union {
+ u32 ip_config;
+ struct {
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ u16 ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ u32 tcp_config;
+ struct {
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ u16 tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ u32 cmd_and_length;
+ union {
+ u32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ u16 mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+ u64 buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ u32 data;
+ struct {
+ u16 length; /* Data buffer length */
+ u8 typ_len_ext;
+ u8 cmd;
+ } flags;
+ } lower;
+ union {
+ u32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ u16 special;
+ } fields;
+ } upper;
+};
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 tor;
+ u64 tot;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+ u64 cbtmpc;
+ u64 htdpmc;
+ u64 cbrdpc;
+ u64 cbrmpc;
+ u64 rpthc;
+ u64 hgptc;
+ u64 htcbdpc;
+ u64 hgorc;
+ u64 hgotc;
+ u64 lenerrs;
+ u64 scvpc;
+ u64 hrmpc;
+};
+
+struct e1000_phy_stats {
+ u32 idle_errors;
+ u32 receive_errors;
+};
+
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options;
+ u8 checksum;
+};
+
+#define E1000_HI_MAX_DATA_LENGTH 252
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header;
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header;
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
+};
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+
+struct e1000_mac_operations {
+ s32 (*check_for_link)(struct e1000_hw *);
+ s32 (*reset_hw)(struct e1000_hw *);
+ s32 (*init_hw)(struct e1000_hw *);
+ s32 (*setup_physical_interface)(struct e1000_hw *);
+ void (*rar_set)(struct e1000_hw *, u8 *, u32);
+ s32 (*read_mac_addr)(struct e1000_hw *);
+ s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
+};
+
+struct e1000_phy_operations {
+ s32 (*acquire_phy)(struct e1000_hw *);
+ s32 (*force_speed_duplex)(struct e1000_hw *);
+ s32 (*get_cfg_done)(struct e1000_hw *hw);
+ s32 (*get_cable_length)(struct e1000_hw *);
+ s32 (*get_phy_info)(struct e1000_hw *);
+ s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *);
+ void (*release_phy)(struct e1000_hw *);
+ s32 (*reset_phy)(struct e1000_hw *);
+ s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
+ s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
+ s32 (*write_phy_reg)(struct e1000_hw *, u32, u16);
+};
+
+struct e1000_nvm_operations {
+ s32 (*acquire_nvm)(struct e1000_hw *);
+ s32 (*read_nvm)(struct e1000_hw *, u16, u16, u16 *);
+ void (*release_nvm)(struct e1000_hw *);
+ s32 (*write_nvm)(struct e1000_hw *, u16, u16, u16 *);
+};
+
+struct e1000_info {
+ s32 (*get_invariants)(struct e1000_hw *);
+ struct e1000_mac_operations *mac_ops;
+ struct e1000_phy_operations *phy_ops;
+ struct e1000_nvm_operations *nvm_ops;
+};
+
+extern const struct e1000_info e1000_82575_info;
+
+struct e1000_mac_info {
+ struct e1000_mac_operations ops;
+
+ u8 addr[6];
+ u8 perm_addr[6];
+
+ enum e1000_mac_type type;
+
+ u32 collision_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ u32 mc_filter_type;
+ u32 tx_packet_delta;
+ u32 txcw;
+
+ u16 current_ifs_val;
+ u16 ifs_max_val;
+ u16 ifs_min_val;
+ u16 ifs_ratio;
+ u16 ifs_step_size;
+ u16 mta_reg_count;
+ u16 rar_entry_count;
+
+ u8 forced_speed_duplex;
+
+ bool adaptive_ifs;
+ bool arc_subsystem_valid;
+ bool asf_firmware_present;
+ bool autoneg;
+ bool autoneg_failed;
+ bool disable_av;
+ bool disable_hw_init_bits;
+ bool get_link_status;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool report_tx_early;
+ bool serdes_has_link;
+ bool tx_pkt_filtering;
+};
+
+struct e1000_phy_info {
+ struct e1000_phy_operations ops;
+
+ enum e1000_phy_type type;
+
+ enum e1000_1000t_rx_status local_rx;
+ enum e1000_1000t_rx_status remote_rx;
+ enum e1000_ms_type ms_type;
+ enum e1000_ms_type original_ms_type;
+ enum e1000_rev_polarity cable_polarity;
+ enum e1000_smart_speed smart_speed;
+
+ u32 addr;
+ u32 id;
+ u32 reset_delay_us; /* in usec */
+ u32 revision;
+
+ enum e1000_media_type media_type;
+
+ u16 autoneg_advertised;
+ u16 autoneg_mask;
+ u16 cable_length;
+ u16 max_cable_length;
+ u16 min_cable_length;
+
+ u8 mdix;
+
+ bool disable_polarity_correction;
+ bool is_mdix;
+ bool polarity_correction;
+ bool reset_disable;
+ bool speed_downgraded;
+ bool autoneg_wait_to_complete;
+};
+
+struct e1000_nvm_info {
+ struct e1000_nvm_operations ops;
+
+ enum e1000_nvm_type type;
+ enum e1000_nvm_override override;
+
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+
+ u16 word_size;
+ u16 delay_usec;
+ u16 address_bits;
+ u16 opcode_bits;
+ u16 page_size;
+};
+
+struct e1000_bus_info {
+ enum e1000_bus_type type;
+ enum e1000_bus_speed speed;
+ enum e1000_bus_width width;
+
+ u32 snoop;
+
+ u16 func;
+ u16 pci_cmd_word;
+};
+
+struct e1000_fc_info {
+ u32 high_water; /* Flow control high-water mark */
+ u32 low_water; /* Flow control low-water mark */
+ u16 pause_time; /* Flow control pause timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ enum e1000_fc_type type; /* Type of flow control */
+ enum e1000_fc_type original_type;
+};
+
+struct e1000_hw {
+ void *back;
+ void *dev_spec;
+
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ unsigned long io_base;
+
+ struct e1000_mac_info mac;
+ struct e1000_fc_info fc;
+ struct e1000_phy_info phy;
+ struct e1000_nvm_info nvm;
+ struct e1000_bus_info bus;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+
+ u32 dev_spec_size;
+
+ u16 device_id;
+ u16 subsystem_vendor_id;
+ u16 subsystem_device_id;
+ u16 vendor_id;
+
+ u8 revision_id;
+};
+
+#ifdef DEBUG
+extern char *igb_get_hw_dev_name(struct e1000_hw *hw);
+#define hw_dbg(hw, format, arg...) \
+ printk(KERN_DEBUG "%s: " format, igb_get_hw_dev_name(hw), ##arg)
+#else
+static inline int __attribute__ ((format (printf, 2, 3)))
+hw_dbg(struct e1000_hw *hw, const char *format, ...)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
new file mode 100644
index 000000000000..3e84a3f0c1d8
--- /dev/null
+++ b/drivers/net/igb/e1000_mac.c
@@ -0,0 +1,1505 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+
+#include "e1000_mac.h"
+
+#include "igb.h"
+
+static s32 igb_set_default_fc(struct e1000_hw *hw);
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
+
+/**
+ * e1000_remove_device - Free device specific structure
+ * @hw: pointer to the HW structure
+ *
+ * If a device specific structure was allocated, this function will
+ * free it.
+ **/
+void igb_remove_device(struct e1000_hw *hw)
+{
+ /* Freeing the dev_spec member of e1000_hw structure */
+ kfree(hw->dev_spec);
+}
+
+static void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_read_config_word(adapter->pdev, reg, value);
+}
+
+static s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+ return 0;
+}
+
+/**
+ * e1000_get_bus_info_pcie - Get PCIe bus information
+ * @hw: pointer to the HW structure
+ *
+ * Determines and stores the system bus information for a particular
+ * network interface. The following bus information is determined and stored:
+ * bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
+{
+ struct e1000_bus_info *bus = &hw->bus;
+ s32 ret_val;
+ u32 status;
+ u16 pcie_link_status, pci_header_type;
+
+ bus->type = e1000_bus_type_pci_express;
+ bus->speed = e1000_bus_speed_2500;
+
+ ret_val = igb_read_pcie_cap_reg(hw,
+ PCIE_LINK_STATUS,
+ &pcie_link_status);
+ if (ret_val)
+ bus->width = e1000_bus_width_unknown;
+ else
+ bus->width = (enum e1000_bus_width)((pcie_link_status &
+ PCIE_LINK_WIDTH_MASK) >>
+ PCIE_LINK_WIDTH_SHIFT);
+
+ igb_read_pci_cfg(hw, PCI_HEADER_TYPE_REGISTER, &pci_header_type);
+ if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) {
+ status = rd32(E1000_STATUS);
+ bus->func = (status & E1000_STATUS_FUNC_MASK)
+ >> E1000_STATUS_FUNC_SHIFT;
+ } else {
+ bus->func = 0;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_clear_vfta - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+void igb_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ array_wr32(E1000_VFTA, offset, 0);
+ wrfl();
+ }
+}
+
+/**
+ * e1000_write_vfta - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ *
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
+void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ array_wr32(E1000_VFTA, offset, value);
+ wrfl();
+}
+
+/**
+ * e1000_init_rx_addrs - Initialize receive address's
+ * @hw: pointer to the HW structure
+ * @rar_count: receive address registers
+ *
+ * Setups the receive address registers by setting the base receive address
+ * register to the devices MAC address and clearing all the other receive
+ * address registers to 0.
+ **/
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+ u32 i;
+
+ /* Setup the receive address */
+ hw_dbg(hw, "Programming MAC Address into RAR[0]\n");
+
+ hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+ /* Zero out the other (rar_entry_count - 1) receive addresses */
+ hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1);
+ for (i = 1; i < rar_count; i++) {
+ array_wr32(E1000_RA, (i << 1), 0);
+ wrfl();
+ array_wr32(E1000_RA, ((i << 1) + 1), 0);
+ wrfl();
+ }
+}
+
+/**
+ * e1000_check_alt_mac_addr - Check for alternate MAC addr
+ * @hw: pointer to the HW structure
+ *
+ * Checks the nvm for an alternate MAC address. An alternate MAC address
+ * can be setup by pre-boot software and must be treated like a permanent
+ * address and must override the actual permanent MAC address. If an
+ * alternate MAC address is fopund it is saved in the hw struct and
+ * prgrammed into RAR0 and the cuntion returns success, otherwise the
+ * fucntion returns an error.
+ **/
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
+{
+ u32 i;
+ s32 ret_val = 0;
+ u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+ u8 alt_mac_addr[ETH_ALEN];
+
+ ret_val = hw->nvm.ops.read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+ &nvm_alt_mac_addr_offset);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ goto out;
+ }
+
+ if (nvm_alt_mac_addr_offset == 0xFFFF) {
+ ret_val = -(E1000_NOT_IMPLEMENTED);
+ goto out;
+ }
+
+ if (hw->bus.func == E1000_FUNC_1)
+ nvm_alt_mac_addr_offset += ETH_ALEN/sizeof(u16);
+
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ offset = nvm_alt_mac_addr_offset + (i >> 1);
+ ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ goto out;
+ }
+
+ alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+ alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+ }
+
+ /* if multicast bit is set, the alternate address will not be used */
+ if (alt_mac_addr[0] & 0x01) {
+ ret_val = -(E1000_NOT_IMPLEMENTED);
+ goto out;
+ }
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i] = alt_mac_addr[i];
+
+ hw->mac.ops.rar_set(hw, hw->mac.perm_addr, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_rar_set - Set receive address register
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ *
+ * Sets the receive address array register at index to the address passed
+ * in by addr.
+ **/
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /*
+ * HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] |
+ ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ if (!hw->mac.disable_av)
+ rar_high |= E1000_RAH_AV;
+
+ array_wr32(E1000_RA, (index << 1), rar_low);
+ array_wr32(E1000_RA, ((index << 1) + 1), rar_high);
+}
+
+/**
+ * e1000_mta_set - Set multicast filter table address
+ * @hw: pointer to the HW structure
+ * @hash_value: determines the MTA register and bit to set
+ *
+ * The multicast table address is a register array of 32-bit registers.
+ * The hash_value is used to determine what register the bit is in, the
+ * current value is read, the new bit is OR'd in and the new value is
+ * written back into the register.
+ **/
+static void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg, mta;
+
+ /*
+ * The MTA is a register array of 32-bit registers. It is
+ * treated like an array of (32*mta_reg_count) bits. We want to
+ * set bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The (hw->mac.mta_reg_count - 1) serves as a
+ * mask to bits 31:5 of the hash value which gives us the
+ * register we're modifying. The hash bit within that register
+ * is determined by the lower 5 bits of the hash value.
+ */
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ mta = array_rd32(E1000_MTA, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ array_wr32(E1000_MTA, hash_reg, mta);
+ wrfl();
+}
+
+/**
+ * e1000_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ * @rar_used_count: the first RAR register free to program
+ * @rar_count: total number of supported Receive Address Registers
+ *
+ * Updates the Receive Address Registers and Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ * The parameter rar_count will usually be hw->mac.rar_entry_count
+ * unless there are workarounds that change this.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count,
+ u32 rar_used_count, u32 rar_count)
+{
+ u32 hash_value;
+ u32 i;
+
+ /*
+ * Load the first set of multicast addresses into the exact
+ * filters (RAR). If there are not enough to fill the RAR
+ * array, clear the filters.
+ */
+ for (i = rar_used_count; i < rar_count; i++) {
+ if (mc_addr_count) {
+ hw->mac.ops.rar_set(hw, mc_addr_list, i);
+ mc_addr_count--;
+ mc_addr_list += ETH_ALEN;
+ } else {
+ array_wr32(E1000_RA, i << 1, 0);
+ wrfl();
+ array_wr32(E1000_RA, (i << 1) + 1, 0);
+ wrfl();
+ }
+ }
+
+ /* Clear the old settings from the MTA */
+ hw_dbg(hw, "Clearing MTA\n");
+ for (i = 0; i < hw->mac.mta_reg_count; i++) {
+ array_wr32(E1000_MTA, i, 0);
+ wrfl();
+ }
+
+ /* Load any remaining multicast addresses into the hash table. */
+ for (; mc_addr_count > 0; mc_addr_count--) {
+ hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+ hw_dbg(hw, "Hash value = 0x%03X\n", hash_value);
+ igb_mta_set(hw, hash_value);
+ mc_addr_list += ETH_ALEN;
+ }
+}
+
+/**
+ * e1000_hash_mc_addr - Generate a multicast hash value
+ * @hw: pointer to the HW structure
+ * @mc_addr: pointer to a multicast address
+ *
+ * Generates a multicast address hash value which is used to determine
+ * the multicast filter table array address and new table value. See
+ * igb_mta_set()
+ **/
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ /*
+ * For a mc_filter_type of 0, bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
+ while (hash_mask >> bit_shift != 0xFF)
+ bit_shift++;
+
+ /*
+ * The portion of the address that is used for the hash table
+ * is determined by the mc_filter_type setting.
+ * The algorithm is such that there is a total of 8 bits of shifting.
+ * The bit_shift for a mc_filter_type of 0 represents the number of
+ * left-shifts where the MSB of mc_addr[5] would still fall within
+ * the hash_mask. Case 0 does this exactly. Since there are a total
+ * of 8 bits of shifting, then mc_addr[4] will shift right the
+ * remaining number of bits. Thus 8 - bit_shift. The rest of the
+ * cases are a variation of this algorithm...essentially raising the
+ * number of bits to shift mc_addr[5] left, while still keeping the
+ * 8-bit shifting total.
+ *
+ * For example, given the following Destination MAC Address and an
+ * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+ * we can see that the bit_shift for case 0 is 4. These are the hash
+ * values resulting from each mc_filter_type...
+ * [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ *
+ * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+ * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+ * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+ * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+ */
+ switch (hw->mac.mc_filter_type) {
+ default:
+ case 0:
+ break;
+ case 1:
+ bit_shift += 1;
+ break;
+ case 2:
+ bit_shift += 2;
+ break;
+ case 3:
+ bit_shift += 4;
+ break;
+ }
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+ (((u16) mc_addr[5]) << bit_shift)));
+
+ return hash_value;
+}
+
+/**
+ * e1000_clear_hw_cntrs_base - Clear base hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the base hardware counters by reading the counter registers.
+ **/
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
+{
+ u32 temp;
+
+ temp = rd32(E1000_CRCERRS);
+ temp = rd32(E1000_SYMERRS);
+ temp = rd32(E1000_MPC);
+ temp = rd32(E1000_SCC);
+ temp = rd32(E1000_ECOL);
+ temp = rd32(E1000_MCC);
+ temp = rd32(E1000_LATECOL);
+ temp = rd32(E1000_COLC);
+ temp = rd32(E1000_DC);
+ temp = rd32(E1000_SEC);
+ temp = rd32(E1000_RLEC);
+ temp = rd32(E1000_XONRXC);
+ temp = rd32(E1000_XONTXC);
+ temp = rd32(E1000_XOFFRXC);
+ temp = rd32(E1000_XOFFTXC);
+ temp = rd32(E1000_FCRUC);
+ temp = rd32(E1000_GPRC);
+ temp = rd32(E1000_BPRC);
+ temp = rd32(E1000_MPRC);
+ temp = rd32(E1000_GPTC);
+ temp = rd32(E1000_GORCL);
+ temp = rd32(E1000_GORCH);
+ temp = rd32(E1000_GOTCL);
+ temp = rd32(E1000_GOTCH);
+ temp = rd32(E1000_RNBC);
+ temp = rd32(E1000_RUC);
+ temp = rd32(E1000_RFC);
+ temp = rd32(E1000_ROC);
+ temp = rd32(E1000_RJC);
+ temp = rd32(E1000_TORL);
+ temp = rd32(E1000_TORH);
+ temp = rd32(E1000_TOTL);
+ temp = rd32(E1000_TOTH);
+ temp = rd32(E1000_TPR);
+ temp = rd32(E1000_TPT);
+ temp = rd32(E1000_MPTC);
+ temp = rd32(E1000_BPTC);
+}
+
+/**
+ * e1000_check_for_copper_link - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+s32 igb_check_for_copper_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /*
+ * First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ goto out; /* No link detected */
+
+ mac->get_link_status = false;
+
+ /*
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ igb_check_downshift(hw);
+
+ /*
+ * If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ /*
+ * Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ igb_config_collision_dist(hw);
+
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = igb_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg(hw, "Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_setup_link - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
+s32 igb_setup_link(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /*
+ * In the case of the phy reset being blocked, we already have a link.
+ * We do not need to set it up again.
+ */
+ if (igb_check_reset_block(hw))
+ goto out;
+
+ ret_val = igb_set_default_fc(hw);
+ if (ret_val)
+ goto out;
+
+ /*
+ * We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ hw->fc.original_type = hw->fc.type;
+
+ hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", hw->fc.type);
+
+ /* Call the necessary media_type subroutine to configure the link. */
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ hw_dbg(hw,
+ "Initializing the Flow Control address, type and timer regs\n");
+ wr32(E1000_FCT, FLOW_CONTROL_TYPE);
+ wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ wr32(E1000_FCTTV, hw->fc.pause_time);
+
+ ret_val = igb_set_fc_watermarks(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_config_collision_dist - Configure collision distance
+ * @hw: pointer to the HW structure
+ *
+ * Configures the collision distance to the default value and is used
+ * during link setup. Currently no func pointer exists and all
+ * implementations are handled in the generic version of this function.
+ **/
+void igb_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl;
+
+ tctl = rd32(E1000_TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+ wr32(E1000_TCTL, tctl);
+ wrfl();
+}
+
+/**
+ * e1000_set_fc_watermarks - Set flow control high/low watermarks
+ * @hw: pointer to the HW structure
+ *
+ * Sets the flow control high/low threshold (watermark) registers. If
+ * flow control XON frame transmission is enabled, then set XON frame
+ * tansmission as well.
+ **/
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 fcrtl = 0, fcrth = 0;
+
+ /*
+ * Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames is not enabled, then these
+ * registers will be set to 0.
+ */
+ if (hw->fc.type & e1000_fc_tx_pause) {
+ /*
+ * We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+ * XON frames.
+ */
+ fcrtl = hw->fc.low_water;
+ if (hw->fc.send_xon)
+ fcrtl |= E1000_FCRTL_XONE;
+
+ fcrth = hw->fc.high_water;
+ }
+ wr32(E1000_FCRTL, fcrtl);
+ wr32(E1000_FCRTH, fcrth);
+
+ return ret_val;
+}
+
+/**
+ * e1000_set_default_fc - Set flow control default values
+ * @hw: pointer to the HW structure
+ *
+ * Read the EEPROM for the default values for flow control and store the
+ * values.
+ **/
+static s32 igb_set_default_fc(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 nvm_data;
+
+ /*
+ * Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ ret_val = hw->nvm.ops.read_nvm(hw, NVM_INIT_CONTROL2_REG, 1,
+ &nvm_data);
+
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ goto out;
+ }
+
+ if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc.type = e1000_fc_none;
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+ NVM_WORD0F_ASM_DIR)
+ hw->fc.type = e1000_fc_tx_pause;
+ else
+ hw->fc.type = e1000_fc_full;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_force_mac_fc - Force the MAC's flow control settings
+ * @hw: pointer to the HW structure
+ *
+ * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
+ * device control register to reflect the adapter settings. TFCE and RFCE
+ * need to be explicitly set by software when a copper PHY is used because
+ * autonegotiation is managed by the PHY rather than the MAC. Software must
+ * also configure these bits when link is forced on a fiber connection.
+ **/
+s32 igb_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val = 0;
+
+ ctrl = rd32(E1000_CTRL);
+
+ /*
+ * Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc.type" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+ hw_dbg(hw, "hw->fc.type = %u\n", hw->fc.type);
+
+ switch (hw->fc.type) {
+ case e1000_fc_none:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case e1000_fc_rx_pause:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case e1000_fc_tx_pause:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case e1000_fc_full:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ wr32(E1000_CTRL, ctrl);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_config_fc_after_link_up - Configures flow control after link
+ * @hw: pointer to the HW structure
+ *
+ * Checks the status of auto-negotiation after link up to ensure that the
+ * speed and duplex were not forced. If the link needed to be forced, then
+ * flow control needs to be forced also. If auto-negotiation is enabled
+ * and did not fail, then we configure flow control based on our link
+ * partner.
+ **/
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = 0;
+ u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+ u16 speed, duplex;
+
+ /*
+ * Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (mac->autoneg_failed) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes)
+ ret_val = igb_force_mac_fc(hw);
+ } else {
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ret_val = igb_force_mac_fc(hw);
+ }
+
+ if (ret_val) {
+ hw_dbg(hw, "Error forcing flow control settings\n");
+ goto out;
+ }
+
+ /*
+ * Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+ /*
+ * Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS,
+ &mii_status_reg);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS,
+ &mii_status_reg);
+ if (ret_val)
+ goto out;
+
+ if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+ hw_dbg(hw, "Copper PHY and Auto Neg "
+ "has not completed.\n");
+ goto out;
+ }
+
+ /*
+ * The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement
+ * Register (Address 4) and the Auto_Negotiation Base
+ * Page Ability Register (Address 5) to determine how
+ * flow control was negotiated.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | e1000_fc_none
+ * 0 | 1 | 0 | DC | e1000_fc_none
+ * 0 | 1 | 1 | 0 | e1000_fc_none
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ * 1 | 0 | 0 | DC | e1000_fc_none
+ * 1 | DC | 1 | DC | e1000_fc_full
+ * 1 | 1 | 0 | 0 | e1000_fc_none
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ * Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_fc_full
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /*
+ * Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.original_type == e1000_fc_full) {
+ hw->fc.type = e1000_fc_full;
+ hw_dbg(hw, "Flow Control = FULL.\r\n");
+ } else {
+ hw->fc.type = e1000_fc_rx_pause;
+ hw_dbg(hw, "Flow Control = "
+ "RX PAUSE frames only.\r\n");
+ }
+ }
+ /*
+ * For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.type = e1000_fc_tx_pause;
+ hw_dbg(hw, "Flow Control = TX PAUSE frames only.\r\n");
+ }
+ /*
+ * For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.type = e1000_fc_rx_pause;
+ hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
+ }
+ /*
+ * Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->fc.original_type == e1000_fc_none ||
+ hw->fc.original_type == e1000_fc_tx_pause) ||
+ hw->fc.strict_ieee) {
+ hw->fc.type = e1000_fc_none;
+ hw_dbg(hw, "Flow Control = NONE.\r\n");
+ } else {
+ hw->fc.type = e1000_fc_rx_pause;
+ hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
+ }
+
+ /*
+ * Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ hw_dbg(hw, "Error getting link speed and duplex\n");
+ goto out;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc.type = e1000_fc_none;
+
+ /*
+ * Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = igb_force_mac_fc(hw);
+ if (ret_val) {
+ hw_dbg(hw, "Error forcing flow control settings\n");
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_speed_and_duplex_copper - Retreive current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Read the status register for the current speed/duplex and store the current
+ * speed and duplex for copper connections.
+ **/
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ u32 status;
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ hw_dbg(hw, "1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ hw_dbg(hw, "100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ hw_dbg(hw, "10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ hw_dbg(hw, "Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ hw_dbg(hw, "Half Duplex\n");
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_get_hw_semaphore - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 igb_get_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 ret_val = 0;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the SW semaphore */
+ while (i < timeout) {
+ swsm = rd32(E1000_SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ igb_put_hw_semaphore(hw);
+ hw_dbg(hw, "Driver can't access the NVM\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_put_hw_semaphore - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
+void igb_put_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = rd32(E1000_SWSM);
+
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+
+ wr32(E1000_SWSM, swsm);
+}
+
+/**
+ * e1000_get_auto_rd_done - Check for auto read completion
+ * @hw: pointer to the HW structure
+ *
+ * Check EEPROM for Auto Read done bit.
+ **/
+s32 igb_get_auto_rd_done(struct e1000_hw *hw)
+{
+ s32 i = 0;
+ s32 ret_val = 0;
+
+
+ while (i < AUTO_READ_DONE_TIMEOUT) {
+ if (rd32(E1000_EECD) & E1000_EECD_AUTO_RD)
+ break;
+ msleep(1);
+ i++;
+ }
+
+ if (i == AUTO_READ_DONE_TIMEOUT) {
+ hw_dbg(hw, "Auto read by HW from NVM has not completed.\n");
+ ret_val = -E1000_ERR_RESET;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_valid_led_default - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->nvm.ops.read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ goto out;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
+ *data = ID_LED_DEFAULT;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_id_led_init -
+ * @hw: pointer to the HW structure
+ *
+ **/
+s32 igb_id_led_init(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ ret_val = igb_valid_led_default(hw, &data);
+ if (ret_val)
+ goto out;
+
+ mac->ledctl_default = rd32(E1000_LEDCTL);
+ mac->ledctl_mode1 = mac->ledctl_default;
+ mac->ledctl_mode2 = mac->ledctl_default;
+
+ for (i = 0; i < 4; i++) {
+ temp = (data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_cleanup_led - Set LED config to default operation
+ * @hw: pointer to the HW structure
+ *
+ * Remove the current LED configuration and set the LED configuration
+ * to the default value, saved from the EEPROM.
+ **/
+s32 igb_cleanup_led(struct e1000_hw *hw)
+{
+ wr32(E1000_LEDCTL, hw->mac.ledctl_default);
+ return 0;
+}
+
+/**
+ * e1000_blink_led - Blink LED
+ * @hw: pointer to the HW structure
+ *
+ * Blink the led's which are set to be on.
+ **/
+s32 igb_blink_led(struct e1000_hw *hw)
+{
+ u32 ledctl_blink = 0;
+ u32 i;
+
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ } else {
+ /*
+ * set the blink bit for each LED that's "on" (0x0E)
+ * in ledctl_mode2
+ */
+ ledctl_blink = hw->mac.ledctl_mode2;
+ for (i = 0; i < 4; i++)
+ if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
+ (i * 8));
+ }
+
+ wr32(E1000_LEDCTL, ledctl_blink);
+
+ return 0;
+}
+
+/**
+ * e1000_led_off - Turn LED off
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED off.
+ **/
+s32 igb_led_off(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ switch (hw->phy.media_type) {
+ case e1000_media_type_fiber:
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ wr32(E1000_CTRL, ctrl);
+ break;
+ case e1000_media_type_copper:
+ wr32(E1000_LEDCTL, hw->mac.ledctl_mode1);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_disable_pcie_master - Disables PCI-express master access
+ * @hw: pointer to the HW structure
+ *
+ * Returns 0 (0) if successful, else returns -10
+ * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued
+ * the master requests to be disabled.
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests.
+ **/
+s32 igb_disable_pcie_master(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 timeout = MASTER_DISABLE_TIMEOUT;
+ s32 ret_val = 0;
+
+ if (hw->bus.type != e1000_bus_type_pci_express)
+ goto out;
+
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+ wr32(E1000_CTRL, ctrl);
+
+ while (timeout) {
+ if (!(rd32(E1000_STATUS) &
+ E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
+ udelay(100);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "Master requests are pending.\n");
+ ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_reset_adaptive - Reset Adaptive Interframe Spacing
+ * @hw: pointer to the HW structure
+ *
+ * Reset the Adaptive Interframe Spacing throttle to default values.
+ **/
+void igb_reset_adaptive(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
+ if (!mac->adaptive_ifs) {
+ hw_dbg(hw, "Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
+ if (!mac->ifs_params_forced) {
+ mac->current_ifs_val = 0;
+ mac->ifs_min_val = IFS_MIN;
+ mac->ifs_max_val = IFS_MAX;
+ mac->ifs_step_size = IFS_STEP;
+ mac->ifs_ratio = IFS_RATIO;
+ }
+
+ mac->in_ifs_mode = false;
+ wr32(E1000_AIT, 0);
+out:
+ return;
+}
+
+/**
+ * e1000_update_adaptive - Update Adaptive Interframe Spacing
+ * @hw: pointer to the HW structure
+ *
+ * Update the Adaptive Interframe Spacing Throttle value based on the
+ * time between transmitted packets and time between collisions.
+ **/
+void igb_update_adaptive(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
+ if (!mac->adaptive_ifs) {
+ hw_dbg(hw, "Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
+ if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
+ if (mac->tx_packet_delta > MIN_NUM_XMITS) {
+ mac->in_ifs_mode = true;
+ if (mac->current_ifs_val < mac->ifs_max_val) {
+ if (!mac->current_ifs_val)
+ mac->current_ifs_val = mac->ifs_min_val;
+ else
+ mac->current_ifs_val +=
+ mac->ifs_step_size;
+ wr32(E1000_AIT,
+ mac->current_ifs_val);
+ }
+ }
+ } else {
+ if (mac->in_ifs_mode &&
+ (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
+ mac->current_ifs_val = 0;
+ mac->in_ifs_mode = false;
+ wr32(E1000_AIT, 0);
+ }
+ }
+out:
+ return;
+}
+
+/**
+ * e1000_validate_mdi_setting - Verify MDI/MDIx settings
+ * @hw: pointer to the HW structure
+ *
+ * Verify that when not using auto-negotitation that MDI/MDIx is correctly
+ * set, which is forced to MDI mode only.
+ **/
+s32 igb_validate_mdi_setting(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
+ hw_dbg(hw, "Invalid MDI setting detected\n");
+ hw->phy.mdix = 1;
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_write_8bit_ctrl_reg - Write a 8bit CTRL register
+ * @hw: pointer to the HW structure
+ * @reg: 32bit register offset such as E1000_SCTL
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes an address/data control type register. There are several of these
+ * and they all have the format address << 8 | data and bit 31 is polled for
+ * completion.
+ **/
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+ u32 offset, u8 data)
+{
+ u32 i, regvalue = 0;
+ s32 ret_val = 0;
+
+ /* Set up the address and data */
+ regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
+ wr32(reg, regvalue);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
+ udelay(5);
+ regvalue = rd32(reg);
+ if (regvalue & E1000_GEN_CTL_READY)
+ break;
+ }
+ if (!(regvalue & E1000_GEN_CTL_READY)) {
+ hw_dbg(hw, "Reg %08x did not indicate ready\n", reg);
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_enable_mng_pass_thru - Enable processing of ARP's
+ * @hw: pointer to the HW structure
+ *
+ * Verifies the hardware needs to allow ARPs to be processed by the host.
+ **/
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+ bool ret_val = false;
+
+ if (!hw->mac.asf_firmware_present)
+ goto out;
+
+ manc = rd32(E1000_MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ goto out;
+
+ if (hw->mac.arc_subsystem_valid) {
+ fwsm = rd32(E1000_FWSM);
+ factps = rd32(E1000_FACTPS);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
+ ret_val = true;
+ goto out;
+ }
+ } else {
+ if ((manc & E1000_MANC_SMBUS_EN) &&
+ !(manc & E1000_MANC_ASF_EN)) {
+ ret_val = true;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h
new file mode 100644
index 000000000000..326b6592307b
--- /dev/null
+++ b/drivers/net/igb/e1000_mac.h
@@ -0,0 +1,98 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MAC_H_
+#define _E1000_MAC_H_
+
+#include "e1000_hw.h"
+
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+#include "e1000_defines.h"
+
+/*
+ * Functions that should not be called directly from drivers but can be used
+ * by other files in this 'shared code'
+ */
+s32 igb_blink_led(struct e1000_hw *hw);
+s32 igb_check_for_copper_link(struct e1000_hw *hw);
+s32 igb_cleanup_led(struct e1000_hw *hw);
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw);
+s32 igb_disable_pcie_master(struct e1000_hw *hw);
+s32 igb_force_mac_fc(struct e1000_hw *hw);
+s32 igb_get_auto_rd_done(struct e1000_hw *hw);
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw);
+s32 igb_get_hw_semaphore(struct e1000_hw *hw);
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+s32 igb_id_led_init(struct e1000_hw *hw);
+s32 igb_led_off(struct e1000_hw *hw);
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count,
+ u32 rar_used_count, u32 rar_count);
+s32 igb_setup_link(struct e1000_hw *hw);
+s32 igb_validate_mdi_setting(struct e1000_hw *hw);
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+ u32 offset, u8 data);
+
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
+void igb_clear_vfta(struct e1000_hw *hw);
+void igb_config_collision_dist(struct e1000_hw *hw);
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void igb_put_hw_semaphore(struct e1000_hw *hw);
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw);
+void igb_remove_device(struct e1000_hw *hw);
+void igb_reset_adaptive(struct e1000_hw *hw);
+void igb_update_adaptive(struct e1000_hw *hw);
+void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
+
+enum e1000_mng_mode {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG 0x20000000
+
+#define E1000_FWSM_MODE_MASK 0xE
+#define E1000_FWSM_MODE_SHIFT 1
+
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
+
+#define E1000_HICR_EN 0x01 /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define E1000_HICR_C 0x02
+
+extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
+
+#endif
diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c
new file mode 100644
index 000000000000..2897106fee92
--- /dev/null
+++ b/drivers/net/igb/e1000_nvm.c
@@ -0,0 +1,605 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac.h"
+#include "e1000_nvm.h"
+
+/**
+ * e1000_raise_eec_clk - Raise EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Enable/Raise the EEPROM clock bit.
+ **/
+static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd | E1000_EECD_SK;
+ wr32(E1000_EECD, *eecd);
+ wrfl();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * e1000_lower_eec_clk - Lower EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Clear/Lower the EEPROM clock bit.
+ **/
+static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd & ~E1000_EECD_SK;
+ wr32(E1000_EECD, *eecd);
+ wrfl();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
+ * @hw: pointer to the HW structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ *
+ * We need to shift 'count' bits out to the EEPROM. So, the value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ **/
+static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ u32 mask;
+
+ mask = 0x01 << (count - 1);
+ if (nvm->type == e1000_nvm_eeprom_microwire)
+ eecd &= ~E1000_EECD_DO;
+ else if (nvm->type == e1000_nvm_eeprom_spi)
+ eecd |= E1000_EECD_DO;
+
+ do {
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ wr32(E1000_EECD, eecd);
+ wrfl();
+
+ udelay(nvm->delay_usec);
+
+ igb_raise_eec_clk(hw, &eecd);
+ igb_lower_eec_clk(hw, &eecd);
+
+ mask >>= 1;
+ } while (mask);
+
+ eecd &= ~E1000_EECD_DI;
+ wr32(E1000_EECD, eecd);
+}
+
+/**
+ * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to the HW structure
+ * @count: number of bits to shift in
+ *
+ * In order to read a register from the EEPROM, we need to shift 'count' bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the data out
+ * "DO" bit. During this "shifting in" process the data in "DI" bit should
+ * always be clear.
+ **/
+static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ eecd = rd32(E1000_EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data <<= 1;
+ igb_raise_eec_clk(hw, &eecd);
+
+ eecd = rd32(E1000_EECD);
+
+ eecd &= ~E1000_EECD_DI;
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ igb_lower_eec_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * @hw: pointer to the HW structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the EEPROM status bit for either read or write completion based
+ * upon the value of 'ee_reg'.
+ **/
+static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 ret_val = -E1000_ERR_NVM;
+
+ for (i = 0; i < attempts; i++) {
+ if (ee_reg == E1000_NVM_POLL_READ)
+ reg = rd32(E1000_EERD);
+ else
+ reg = rd32(E1000_EEWR);
+
+ if (reg & E1000_NVM_RW_REG_DONE) {
+ ret_val = 0;
+ break;
+ }
+
+ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_acquire_nvm - Generic request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 igb_acquire_nvm(struct e1000_hw *hw)
+{
+ u32 eecd = rd32(E1000_EECD);
+ s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+ s32 ret_val = 0;
+
+
+ wr32(E1000_EECD, eecd | E1000_EECD_REQ);
+ eecd = rd32(E1000_EECD);
+
+ while (timeout) {
+ if (eecd & E1000_EECD_GNT)
+ break;
+ udelay(5);
+ eecd = rd32(E1000_EECD);
+ timeout--;
+ }
+
+ if (!timeout) {
+ eecd &= ~E1000_EECD_REQ;
+ wr32(E1000_EECD, eecd);
+ hw_dbg(hw, "Could not acquire NVM grant\n");
+ ret_val = -E1000_ERR_NVM;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_standby_nvm - Return EEPROM to standby state
+ * @hw: pointer to the HW structure
+ *
+ * Return the EEPROM to a standby state.
+ **/
+static void igb_standby_nvm(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+
+ if (nvm->type == e1000_nvm_eeprom_microwire) {
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+
+ igb_raise_eec_clk(hw, &eecd);
+
+ /* Select EEPROM */
+ eecd |= E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+
+ igb_lower_eec_clk(hw, &eecd);
+ } else if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+ }
+}
+
+/**
+ * e1000_stop_nvm - Terminate EEPROM command
+ * @hw: pointer to the HW structure
+ *
+ * Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ eecd = rd32(E1000_EECD);
+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+ /* Pull CS high */
+ eecd |= E1000_EECD_CS;
+ igb_lower_eec_clk(hw, &eecd);
+ } else if (hw->nvm.type == e1000_nvm_eeprom_microwire) {
+ /* CS on Microcwire is active-high */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+ wr32(E1000_EECD, eecd);
+ igb_raise_eec_clk(hw, &eecd);
+ igb_lower_eec_clk(hw, &eecd);
+ }
+}
+
+/**
+ * e1000_release_nvm - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void igb_release_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ e1000_stop_nvm(hw);
+
+ eecd = rd32(E1000_EECD);
+ eecd &= ~E1000_EECD_REQ;
+ wr32(E1000_EECD, eecd);
+}
+
+/**
+ * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
+ * @hw: pointer to the HW structure
+ *
+ * Setups the EEPROM for reading and writing.
+ **/
+static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ s32 ret_val = 0;
+ u16 timeout = 0;
+ u8 spi_stat_reg;
+
+
+ if (nvm->type == e1000_nvm_eeprom_microwire) {
+ /* Clear SK and DI */
+ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+ wr32(E1000_EECD, eecd);
+ /* Set CS */
+ eecd |= E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ } else if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ wr32(E1000_EECD, eecd);
+ udelay(1);
+ timeout = NVM_MAX_RETRY_SPI;
+
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared.
+ * The EEPROM will signal that the command has been completed
+ * by clearing bit 0 of the internal status register. If it's
+ * not cleared within 'timeout', then error out.
+ */
+ while (timeout) {
+ igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+ hw->nvm.opcode_bits);
+ spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
+ if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ igb_standby_nvm(hw);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "SPI NVM Status error\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_read_nvm_eerd - Reads EEPROM using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eerd = 0;
+ s32 ret_val = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+ E1000_NVM_RW_REG_START;
+
+ wr32(E1000_EERD, eerd);
+ ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+ if (ret_val)
+ break;
+
+ data[i] = (rd32(E1000_EERD) >>
+ E1000_NVM_RW_REG_DATA);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_write_nvm_spi - Write to EEPROM using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * Writes data to EEPROM at offset using SPI interface.
+ *
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * EEPROM will most likley contain an invalid checksum.
+ **/
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val;
+ u16 widx = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.acquire_nvm(hw);
+ if (ret_val)
+ goto out;
+
+ msleep(10);
+
+ while (widx < words) {
+ u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+ ret_val = igb_ready_nvm_eeprom(hw);
+ if (ret_val)
+ goto release;
+
+ igb_standby_nvm(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode) */
+ igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+ nvm->opcode_bits);
+
+ igb_standby_nvm(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ write_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+ igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+ nvm->address_bits);
+
+ /* Loop to allow for up to whole page write of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ igb_shift_out_eec_bits(hw, word_out, 16);
+ widx++;
+
+ if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+ igb_standby_nvm(hw);
+ break;
+ }
+ }
+ }
+
+ msleep(10);
+release:
+ hw->nvm.ops.release_nvm(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_read_part_num - Read device part number
+ * @hw: pointer to the HW structure
+ * @part_num: pointer to device part number
+ *
+ * Reads the product board assembly (PBA) number from the EEPROM and stores
+ * the value in part_num.
+ **/
+s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num)
+{
+ s32 ret_val;
+ u16 nvm_data;
+
+ ret_val = hw->nvm.ops.read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ goto out;
+ }
+ *part_num = (u32)(nvm_data << 16);
+
+ ret_val = hw->nvm.ops.read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ goto out;
+ }
+ *part_num |= nvm_data;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_read_mac_addr - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * Reads the device MAC address from the EEPROM and stores the value.
+ * Since devices with two ports use the same EEPROM, we increment the
+ * last bit in the MAC address for the second port.
+ **/
+s32 igb_read_mac_addr(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 offset, nvm_data, i;
+
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ offset = i >> 1;
+ ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ goto out;
+ }
+ hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF);
+ hw->mac.perm_addr[i+1] = (u8)(nvm_data >> 8);
+ }
+
+ /* Flip last bit of mac address if we're on second port */
+ if (hw->bus.func == E1000_FUNC_1)
+ hw->mac.perm_addr[5] ^= 1;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_validate_nvm_checksum - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ ret_val = hw->nvm.ops.read_nvm(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
+ hw_dbg(hw, "NVM Checksum Invalid\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_update_nvm_checksum - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+s32 igb_update_nvm_checksum(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = hw->nvm.ops.read_nvm(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = hw->nvm.ops.write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
+ if (ret_val)
+ hw_dbg(hw, "NVM Write Error while updating checksum.\n");
+
+out:
+ return ret_val;
+}
+
diff --git a/drivers/net/igb/e1000_nvm.h b/drivers/net/igb/e1000_nvm.h
new file mode 100644
index 000000000000..1041c34dcbe1
--- /dev/null
+++ b/drivers/net/igb/e1000_nvm.h
@@ -0,0 +1,40 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_NVM_H_
+#define _E1000_NVM_H_
+
+s32 igb_acquire_nvm(struct e1000_hw *hw);
+void igb_release_nvm(struct e1000_hw *hw);
+s32 igb_read_mac_addr(struct e1000_hw *hw);
+s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num);
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw);
+s32 igb_update_nvm_checksum(struct e1000_hw *hw);
+
+#endif
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
new file mode 100644
index 000000000000..08a86b107229
--- /dev/null
+++ b/drivers/net/igb/e1000_phy.c
@@ -0,0 +1,1807 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+
+static s32 igb_get_phy_cfg_done(struct e1000_hw *hw);
+static void igb_release_phy(struct e1000_hw *hw);
+static s32 igb_acquire_phy(struct e1000_hw *hw);
+static s32 igb_phy_reset_dsp(struct e1000_hw *hw);
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw);
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
+static s32 igb_wait_autoneg(struct e1000_hw *hw);
+
+/* Cable length tables */
+static const u16 e1000_m88_cable_length_table[] =
+ { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_m88_cable_length_table) / \
+ sizeof(e1000_m88_cable_length_table[0]))
+
+static const u16 e1000_igp_2_cable_length_table[] =
+ { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+ 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
+ 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
+ 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
+ 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
+ 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
+ 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
+ 104, 109, 114, 118, 121, 124};
+#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_igp_2_cable_length_table) / \
+ sizeof(e1000_igp_2_cable_length_table[0]))
+
+/**
+ * e1000_check_reset_block - Check if PHY reset is blocked
+ * @hw: pointer to the HW structure
+ *
+ * Read the PHY management control register and check whether a PHY reset
+ * is blocked. If a reset is not blocked return 0, otherwise
+ * return E1000_BLK_PHY_RESET (12).
+ **/
+s32 igb_check_reset_block(struct e1000_hw *hw)
+{
+ u32 manc;
+
+ manc = rd32(E1000_MANC);
+
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+ E1000_BLK_PHY_RESET : 0;
+}
+
+/**
+ * e1000_get_phy_id - Retrieve the PHY ID and revision
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY registers and stores the PHY ID and possibly the PHY
+ * revision in the hardware structure.
+ **/
+s32 igb_get_phy_id(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_ID1, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id = (u32)(phy_id << 16);
+ udelay(20);
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_ID2, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_reset_dsp - Reset PHY DSP
+ * @hw: pointer to the HW structure
+ *
+ * Reset the digital signal processor.
+ **/
+static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+ if (ret_val)
+ goto out;
+
+ ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_read_phy_reg_mdic - Read MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control regsiter in the PHY at offset and stores the
+ * information read to data.
+ **/
+static s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+ ret_val = -E1000_ERR_PARAM;
+ goto out;
+ }
+
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ wr32(E1000_MDIC, mdic);
+
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = rd32(E1000_MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ hw_dbg(hw, "MDI Read did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg(hw, "MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ *data = (u16) mdic;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_write_phy_reg_mdic - Write MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+static s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+ ret_val = -E1000_ERR_PARAM;
+ goto out;
+ }
+
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ wr32(E1000_MDIC, mdic);
+
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = rd32(E1000_MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ hw_dbg(hw, "MDI Write did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg(hw, "MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = igb_acquire_phy(hw);
+ if (ret_val)
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = igb_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ igb_release_phy(hw);
+ goto out;
+ }
+ }
+
+ ret_val = igb_read_phy_reg_mdic(hw,
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ igb_release_phy(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+
+ ret_val = igb_acquire_phy(hw);
+ if (ret_val)
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = igb_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ igb_release_phy(hw);
+ goto out;
+ }
+ }
+
+ ret_val = igb_write_phy_reg_mdic(hw,
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ igb_release_phy(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
+ * and downshift values are set also.
+ **/
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /*
+ * Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /*
+ * Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (phy->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+ ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ if (phy->revision < E1000_REVISION_4) {
+ /*
+ * Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((phy->revision == E1000_REVISION_2) &&
+ (phy->id == M88E1111_I_PHY_ID)) {
+ /* 82573L PHY - set the downshift counter to 5x. */
+ phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ }
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Commit the changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg(hw, "Error committing the PHY changes\n");
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_copper_link_setup_igp - Setup igp PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ * igp PHY's.
+ **/
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.reset_phy(hw);
+ if (ret_val) {
+ hw_dbg(hw, "Error resetting the PHY.\n");
+ goto out;
+ }
+
+ /* Wait 15ms for MAC to configure PHY from NVM settings. */
+ msleep(15);
+
+ /*
+ * The NVM settings will configure LPLU in D3 for
+ * non-IGP1 PHYs.
+ */
+ if (phy->type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ if (hw->phy.ops.set_d3_lplu_state)
+ ret_val = hw->phy.ops.set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ hw_dbg(hw, "Error Disabling LPLU D3\n");
+ goto out;
+ }
+ }
+
+ /* disable lplu d0 during driver init */
+ ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
+ if (ret_val) {
+ hw_dbg(hw, "Error Disabling LPLU D0\n");
+ goto out;
+ }
+ /* Configure mdi-mdix settings */
+ ret_val = hw->phy.ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (phy->mdix) {
+ case 1:
+ data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ ret_val = hw->phy.ops.write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, data);
+ if (ret_val)
+ goto out;
+
+ /* set auto-master slave resolution settings */
+ if (hw->mac.autoneg) {
+ /*
+ * when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default.
+ */
+ if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Set auto Master/Slave resolution process */
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_1000T_CTRL,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~CR_1000T_MS_ENABLE;
+ ret_val = hw->phy.ops.write_phy_reg(hw, PHY_1000T_CTRL,
+ data);
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ /* load defaults for future use */
+ phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
+ ((data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) :
+ e1000_ms_auto;
+
+ switch (phy->ms_type) {
+ case e1000_ms_force_master:
+ data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ data |= CR_1000T_MS_ENABLE;
+ data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = hw->phy.ops.write_phy_reg(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Performs initial bounds checking on autoneg advertisement parameter, then
+ * configure to advertise the full capability. Setup the PHY to autoneg
+ * and restart the negotiation process between the link partner. If
+ * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+s32 igb_copper_link_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_ctrl;
+
+ /*
+ * Perform some bounds checking on the autoneg advertisement
+ * parameter.
+ */
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /*
+ * If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (phy->autoneg_advertised == 0)
+ phy->autoneg_advertised = phy->autoneg_mask;
+
+ hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n");
+ ret_val = igb_phy_setup_autoneg(hw);
+ if (ret_val) {
+ hw_dbg(hw, "Error Setting up Auto-Negotiation\n");
+ goto out;
+ }
+ hw_dbg(hw, "Restarting Auto-Neg\n");
+
+ /*
+ * Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (phy->autoneg_wait_to_complete) {
+ ret_val = igb_wait_autoneg(hw);
+ if (ret_val) {
+ hw_dbg(hw, "Error while waiting for "
+ "autoneg to complete\n");
+ goto out;
+ }
+ }
+
+ hw->mac.get_link_status = true;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
+ * @hw: pointer to the HW structure
+ *
+ * Reads the MII auto-neg advertisement register and/or the 1000T control
+ * register and if the PHY is already setup for auto-negotiation, then
+ * return successful. Otherwise, setup advertisement and flow control to
+ * the appropriate values for the wanted auto-negotiation.
+ **/
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg = 0;
+
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_AUTONEG_ADV,
+ &mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ PHY_1000T_CTRL,
+ &mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /*
+ * First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
+ NWAY_AR_100TX_HD_CAPS |
+ NWAY_AR_10T_FD_CAPS |
+ NWAY_AR_10T_HD_CAPS);
+ mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
+ hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+ hw_dbg(hw, "Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+ hw_dbg(hw, "Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+ hw_dbg(hw, "Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+ hw_dbg(hw, "Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+ hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n");
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+ hw_dbg(hw, "Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /*
+ * Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
+ * negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc.type) {
+ case e1000_fc_none:
+ /*
+ * Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_rx_pause:
+ /*
+ * RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ *
+ * Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ * hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_tx_pause:
+ /*
+ * TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case e1000_fc_full:
+ /*
+ * Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.write_phy_reg(hw, PHY_AUTONEG_ADV,
+ mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ PHY_1000T_CTRL,
+ mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val = hw->phy.ops.write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg(hw, "IGP PSCR: %X\n", phy_data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg(hw,
+ "Waiting for forced speed/duplex link on IGP phy.\n");
+
+ ret_val = igb_phy_has_link(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ hw_dbg(hw, "Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Resets the PHY to commit the
+ * changes. If time expires while waiting for link up, we reset the DSP.
+ * After reset, TX_CLK and CRS on TX must be set. Return successful upon
+ * successful completion, else return corresponding error code.
+ **/
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ /*
+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data);
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ /* Reset the phy to commit changes. */
+ phy_data |= MII_CR_RESET;
+
+ ret_val = hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg(hw,
+ "Waiting for forced speed/duplex link on M88 phy.\n");
+
+ ret_val = igb_phy_has_link(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ /*
+ * We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
+ if (ret_val)
+ goto out;
+ ret_val = igb_phy_reset_dsp(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Resetting the phy means we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock from
+ * the reset value of 2.5MHz.
+ */
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * In addition, we must re-enable CRS on Tx for both half and full
+ * duplex.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val = hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ * @hw: pointer to the HW structure
+ * @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ * Forces speed and duplex on the PHY by doing the following: disable flow
+ * control, force speed/duplex on the MAC, disable auto speed detection,
+ * disable auto-negotiation, configure duplex, configure speed, configure
+ * the collision distance, write configuration to CTRL register. The
+ * caller must write to the PHY_CONTROL register for these settings to
+ * take affect.
+ **/
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 ctrl;
+
+ /* Turn off flow control when forcing speed/duplex */
+ hw->fc.type = e1000_fc_none;
+
+ /* Force speed/duplex on the mac */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~E1000_CTRL_SPD_SEL;
+
+ /* Disable Auto Speed Detection */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Disable autoneg on the phy */
+ *phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Forcing Full or Half Duplex? */
+ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+ ctrl &= ~E1000_CTRL_FD;
+ *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+ hw_dbg(hw, "Half Duplex\n");
+ } else {
+ ctrl |= E1000_CTRL_FD;
+ *phy_ctrl |= MII_CR_FULL_DUPLEX;
+ hw_dbg(hw, "Full Duplex\n");
+ }
+
+ /* Forcing 10mb or 100mb? */
+ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
+ ctrl |= E1000_CTRL_SPD_100;
+ *phy_ctrl |= MII_CR_SPEED_100;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ hw_dbg(hw, "Forcing 100mb\n");
+ } else {
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ *phy_ctrl |= MII_CR_SPEED_10;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ hw_dbg(hw, "Forcing 10mb\n");
+ }
+
+ igb_config_collision_dist(hw);
+
+ wr32(E1000_CTRL, ctrl);
+}
+
+/**
+ * e1000_set_d3_lplu_state - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * and SmartSpeed is disabled when active is true, else clear lplu for D3
+ * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ &data);
+ if (ret_val)
+ goto out;
+
+ if (!active) {
+ data &= ~IGP02E1000_PM_D3_LPLU;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ }
+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= IGP02E1000_PM_D3_LPLU;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = hw->phy.ops.read_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = hw->phy.ops.write_phy_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_check_downshift - Checks whether a downshift in speed occured
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * A downshift is detected by querying the PHY link health.
+ **/
+s32 igb_check_downshift(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, offset, mask;
+
+ switch (phy->type) {
+ case e1000_phy_m88:
+ case e1000_phy_gg82563:
+ offset = M88E1000_PHY_SPEC_STATUS;
+ mask = M88E1000_PSSR_DOWNSHIFT;
+ break;
+ case e1000_phy_igp_2:
+ case e1000_phy_igp:
+ case e1000_phy_igp_3:
+ offset = IGP01E1000_PHY_LINK_HEALTH;
+ mask = IGP01E1000_PLHR_SS_DOWNGRADE;
+ break;
+ default:
+ /* speed downshift not supported */
+ phy->speed_downgraded = false;
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, offset, &phy_data);
+
+ if (!ret_val)
+ phy->speed_downgraded = (phy_data & mask) ? true : false;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_check_polarity_m88 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+static s32 igb_check_polarity_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_polarity_igp - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY port status register, and the
+ * current speed (since there is no polarity at 100Mbps).
+ **/
+static s32 igb_check_polarity_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data, offset, mask;
+
+ /*
+ * Polarity is determined based on the speed of
+ * our connection.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+ &data);
+ if (ret_val)
+ goto out;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ offset = IGP01E1000_PHY_PCS_INIT_REG;
+ mask = IGP01E1000_PHY_POLARITY_MASK;
+ } else {
+ /*
+ * This really only applies to 10Mbps since
+ * there is no polarity for 100Mbps (always 0).
+ */
+ offset = IGP01E1000_PHY_PORT_STATUS;
+ mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+ }
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, offset, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_wait_autoneg - Wait for auto-neg compeletion
+ * @hw: pointer to the HW structure
+ *
+ * Waits for auto-negotiation to complete or for the auto-negotiation time
+ * limit to expire, which ever happens first.
+ **/
+static s32 igb_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_AUTONEG_COMPLETE)
+ break;
+ msleep(100);
+ }
+
+ /*
+ * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+ * has completed.
+ */
+ return ret_val;
+}
+
+/**
+ * e1000_phy_has_link - Polls PHY for link
+ * @hw: pointer to the HW structure
+ * @iterations: number of times to poll for link
+ * @usec_interval: delay between polling attempts
+ * @success: pointer to whether polling was successful or not
+ *
+ * Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ for (i = 0; i < iterations; i++) {
+ /*
+ * Some PHYs require the PHY_STATUS register to be read
+ * twice due to the link bit being sticky. No harm doing
+ * it across the board.
+ */
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_LINK_STATUS)
+ break;
+ if (usec_interval >= 1000)
+ mdelay(usec_interval/1000);
+ else
+ udelay(usec_interval);
+ }
+
+ *success = (i < iterations) ? true : false;
+
+ return ret_val;
+}
+
+/**
+ * e1000_get_cable_length_m88 - Determine cable length for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY specific status register to retrieve the cable length
+ * information. The cable length is determined by averaging the minimum and
+ * maximum values to get the "average" cable length. The m88 PHY has four
+ * possible cable length values, which are:
+ * Register Value Cable Length
+ * 0 < 50 meters
+ * 1 50 - 80 meters
+ * 2 80 - 110 meters
+ * 3 110 - 140 meters
+ * 4 > 140 meters
+ **/
+s32 igb_get_cable_length_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, index;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ * @hw: pointer to the HW structure
+ *
+ * The automatic gain control (agc) normalizes the amplitude of the
+ * received signal, adjusting for the attenuation produced by the
+ * cable. By reading the AGC registers, which reperesent the
+ * cobination of course and fine gain value, the value can be put
+ * into a lookup table to obtain the approximate cable length
+ * for each channel.
+ **/
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data, i, agc_value = 0;
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
+ u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
+ {IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D};
+
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = hw->phy.ops.read_phy_reg(hw, agc_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Getting bits 15:9, which represent the combination of
+ * course and fine gain values. The result is a number
+ * that can be put into the lookup table to obtain the
+ * approximate cable length.
+ */
+ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
+
+ /* Array index bound check. */
+ if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
+ (cur_agc_index == 0)) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc_index] >
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ min_agc_index = cur_agc_index;
+ if (e1000_igp_2_cable_length_table[max_agc_index] <
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ max_agc_index = cur_agc_index;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+ }
+
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+ e1000_igp_2_cable_length_table[max_agc_index]);
+ agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+ /* Calculate cable length with the error range of +/- 10 meters. */
+ phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_phy_info_m88 - Retrieve PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Valid for only copper links. Read the PHY status register (sticky read)
+ * to verify that link is up. Read the PHY special control register to
+ * determine the polarity and 10base-T extended distance. Read the PHY
+ * special status register to determine MDI/MDIx and current speed. If
+ * speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ hw_dbg(hw, "Phy info is only valid for copper media\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg(hw, "Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
+ ? true
+ : false;
+
+ ret_val = igb_check_polarity_m88(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? true : false;
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ ret_val = hw->phy.ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ /* Set values to "undefined" */
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_phy_info_igp - Retrieve igp PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg(hw, "Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = igb_check_polarity_igp(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+ &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & IGP01E1000_PSSR_MDIX) ? true : false;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ ret_val = hw->phy.ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_1000T_STATUS,
+ &data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_sw_reset - PHY software reset
+ * @hw: pointer to the HW structure
+ *
+ * Does a software reset of the PHY by reading the PHY control register and
+ * setting/write the control register reset bit to the PHY.
+ **/
+s32 igb_phy_sw_reset(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_ctrl;
+
+ ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= MII_CR_RESET;
+ ret_val = hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ udelay(1);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_hw_reset - PHY hardware reset
+ * @hw: pointer to the HW structure
+ *
+ * Verify the reset block is not blocking us from resetting. Acquire
+ * semaphore (if necessary) and read/set/write the device control reset
+ * bit in the PHY. Wait the appropriate delay time for the device to
+ * reset and relase the semaphore (if necessary).
+ **/
+s32 igb_phy_hw_reset(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u32 ctrl;
+
+ ret_val = igb_check_reset_block(hw);
+ if (ret_val) {
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = igb_acquire_phy(hw);
+ if (ret_val)
+ goto out;
+
+ ctrl = rd32(E1000_CTRL);
+ wr32(E1000_CTRL, ctrl | E1000_CTRL_PHY_RST);
+ wrfl();
+
+ udelay(phy->reset_delay_us);
+
+ wr32(E1000_CTRL, ctrl);
+ wrfl();
+
+ udelay(150);
+
+ igb_release_phy(hw);
+
+ ret_val = igb_get_phy_cfg_done(hw);
+
+out:
+ return ret_val;
+}
+
+/* Internal function pointers */
+
+/**
+ * e1000_get_phy_cfg_done - Generic PHY configuration done
+ * @hw: pointer to the HW structure
+ *
+ * Return success if silicon family did not implement a family specific
+ * get_cfg_done function.
+ **/
+static s32 igb_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.get_cfg_done)
+ return hw->phy.ops.get_cfg_done(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_release_phy - Generic release PHY
+ * @hw: pointer to the HW structure
+ *
+ * Return if silicon family does not require a semaphore when accessing the
+ * PHY.
+ **/
+static void igb_release_phy(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.release_phy)
+ hw->phy.ops.release_phy(hw);
+}
+
+/**
+ * e1000_acquire_phy - Generic acquire PHY
+ * @hw: pointer to the HW structure
+ *
+ * Return success if silicon family does not require a semaphore when
+ * accessing the PHY.
+ **/
+static s32 igb_acquire_phy(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.acquire_phy)
+ return hw->phy.ops.acquire_phy(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex
+ * @hw: pointer to the HW structure
+ *
+ * When the silicon family has not implemented a forced speed/duplex
+ * function for the PHY, simply return 0.
+ **/
+s32 igb_phy_force_speed_duplex(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.force_speed_duplex)
+ return hw->phy.ops.force_speed_duplex(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_phy_init_script_igp3 - Inits the IGP3 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
+{
+ hw_dbg(hw, "Running IGP 3 PHY init script\n");
+
+ /* PHY init IGP 3 */
+ /* Enable rise/fall, 10-mode work in class-A */
+ hw->phy.ops.write_phy_reg(hw, 0x2F5B, 0x9018);
+ /* Remove all caps from Replica path filter */
+ hw->phy.ops.write_phy_reg(hw, 0x2F52, 0x0000);
+ /* Bias trimming for ADC, AFE and Driver (Default) */
+ hw->phy.ops.write_phy_reg(hw, 0x2FB1, 0x8B24);
+ /* Increase Hybrid poly bias */
+ hw->phy.ops.write_phy_reg(hw, 0x2FB2, 0xF8F0);
+ /* Add 4% to TX amplitude in Giga mode */
+ hw->phy.ops.write_phy_reg(hw, 0x2010, 0x10B0);
+ /* Disable trimming (TTT) */
+ hw->phy.ops.write_phy_reg(hw, 0x2011, 0x0000);
+ /* Poly DC correction to 94.6% + 2% for all channels */
+ hw->phy.ops.write_phy_reg(hw, 0x20DD, 0x249A);
+ /* ABS DC correction to 95.9% */
+ hw->phy.ops.write_phy_reg(hw, 0x20DE, 0x00D3);
+ /* BG temp curve trim */
+ hw->phy.ops.write_phy_reg(hw, 0x28B4, 0x04CE);
+ /* Increasing ADC OPAMP stage 1 currents to max */
+ hw->phy.ops.write_phy_reg(hw, 0x2F70, 0x29E4);
+ /* Force 1000 ( required for enabling PHY regs configuration) */
+ hw->phy.ops.write_phy_reg(hw, 0x0000, 0x0140);
+ /* Set upd_freq to 6 */
+ hw->phy.ops.write_phy_reg(hw, 0x1F30, 0x1606);
+ /* Disable NPDFE */
+ hw->phy.ops.write_phy_reg(hw, 0x1F31, 0xB814);
+ /* Disable adaptive fixed FFE (Default) */
+ hw->phy.ops.write_phy_reg(hw, 0x1F35, 0x002A);
+ /* Enable FFE hysteresis */
+ hw->phy.ops.write_phy_reg(hw, 0x1F3E, 0x0067);
+ /* Fixed FFE for short cable lengths */
+ hw->phy.ops.write_phy_reg(hw, 0x1F54, 0x0065);
+ /* Fixed FFE for medium cable lengths */
+ hw->phy.ops.write_phy_reg(hw, 0x1F55, 0x002A);
+ /* Fixed FFE for long cable lengths */
+ hw->phy.ops.write_phy_reg(hw, 0x1F56, 0x002A);
+ /* Enable Adaptive Clip Threshold */
+ hw->phy.ops.write_phy_reg(hw, 0x1F72, 0x3FB0);
+ /* AHT reset limit to 1 */
+ hw->phy.ops.write_phy_reg(hw, 0x1F76, 0xC0FF);
+ /* Set AHT master delay to 127 msec */
+ hw->phy.ops.write_phy_reg(hw, 0x1F77, 0x1DEC);
+ /* Set scan bits for AHT */
+ hw->phy.ops.write_phy_reg(hw, 0x1F78, 0xF9EF);
+ /* Set AHT Preset bits */
+ hw->phy.ops.write_phy_reg(hw, 0x1F79, 0x0210);
+ /* Change integ_factor of channel A to 3 */
+ hw->phy.ops.write_phy_reg(hw, 0x1895, 0x0003);
+ /* Change prop_factor of channels BCD to 8 */
+ hw->phy.ops.write_phy_reg(hw, 0x1796, 0x0008);
+ /* Change cg_icount + enable integbp for channels BCD */
+ hw->phy.ops.write_phy_reg(hw, 0x1798, 0xD008);
+ /*
+ * Change cg_icount + enable integbp + change prop_factor_master
+ * to 8 for channel A
+ */
+ hw->phy.ops.write_phy_reg(hw, 0x1898, 0xD918);
+ /* Disable AHT in Slave mode on channel A */
+ hw->phy.ops.write_phy_reg(hw, 0x187A, 0x0800);
+ /*
+ * Enable LPLU and disable AN to 1000 in non-D0a states,
+ * Enable SPD+B2B
+ */
+ hw->phy.ops.write_phy_reg(hw, 0x0019, 0x008D);
+ /* Enable restart AN on an1000_dis change */
+ hw->phy.ops.write_phy_reg(hw, 0x001B, 0x2080);
+ /* Enable wh_fifo read clock in 10/100 modes */
+ hw->phy.ops.write_phy_reg(hw, 0x0014, 0x0045);
+ /* Restart AN, Speed selection is 1000 */
+ hw->phy.ops.write_phy_reg(hw, 0x0000, 0x1340);
+
+ return 0;
+}
+
diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h
new file mode 100644
index 000000000000..8f8fe0a780d1
--- /dev/null
+++ b/drivers/net/igb/e1000_phy.h
@@ -0,0 +1,98 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_PHY_H_
+#define _E1000_PHY_H_
+
+enum e1000_ms_type {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+};
+
+enum e1000_smart_speed {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+};
+
+s32 igb_check_downshift(struct e1000_hw *hw);
+s32 igb_check_reset_block(struct e1000_hw *hw);
+s32 igb_copper_link_autoneg(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex(struct e1000_hw *hw);
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw);
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32 igb_get_cable_length_m88(struct e1000_hw *hw);
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw);
+s32 igb_get_phy_id(struct e1000_hw *hw);
+s32 igb_get_phy_info_igp(struct e1000_hw *hw);
+s32 igb_get_phy_info_m88(struct e1000_hw *hw);
+s32 igb_phy_sw_reset(struct e1000_hw *hw);
+s32 igb_phy_hw_reset(struct e1000_hw *hw);
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success);
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
+#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+
+/* Enable flexible speed on link-up */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_MDIX 0x0008
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+#define IGP02E1000_AGC_RANGE 15
+
+#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
+
+#endif
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
new file mode 100644
index 000000000000..ff187b73c69e
--- /dev/null
+++ b/drivers/net/igb/e1000_regs.h
@@ -0,0 +1,270 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
+#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
+#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_RDFPCQ(_n) (0x02430 + (0x4 * (_n)))
+#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
+/* Split and Replication RX Control - RW */
+/*
+ * Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) \
+ : (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) \
+ : (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) \
+ : (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) \
+ : (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) \
+ : (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) \
+ : (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) \
+ : (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) \
+ : (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) \
+ : (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) \
+ : (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) \
+ : (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) \
+ : (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \
+ : (0x0E028 + ((_n) * 0x40)))
+#define E1000_TARC(_n) (0x03840 + (_n << 8))
+#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
+#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
+#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \
+ : (0x0E038 + ((_n) * 0x40)))
+#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
+ : (0x0E03C + ((_n) * 0x40)))
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_DTXCTL 0x03590 /* DMA TX Control - RW */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+/* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXPTC 0x04104
+/* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICRXATC 0x04108
+/* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C
+/* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXATC 0x04110
+/* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQEC 0x04118
+/* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICTXQMTC 0x0411C
+/* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
+#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
+#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */
+#define E1000_CBTMPC 0x0402C /* Circuit Breaker TX Packet Count */
+#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */
+#define E1000_CBRMPC 0x040FC /* Circuit Breaker RX Packet Count */
+#define E1000_RPTHC 0x04104 /* Rx Packets To Host */
+#define E1000_HGPTC 0x04118 /* Host Good Packets TX Count */
+#define E1000_HTCBDPC 0x04124 /* Host TX Circuit Breaker Dropped Count */
+#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */
+#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */
+#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */
+#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */
+#define E1000_LENERRS 0x04138 /* Length Errors Count */
+#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */
+#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */
+#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */
+#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */
+#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Page - RW */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RLPML 0x05004 /* RX Long Packet Max Length */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_VMD_CTL 0x0581C /* VMDq Control - RW */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
+#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
+#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_HICR 0x08F00 /* Host Inteface Control */
+
+/* RSS registers */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
+#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
+#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt RX VLAN Priority - RW */
+/* MSI-X Allocation Register (_i) - RW */
+#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4))
+/* MSI-X Table entry addr low reg 0 - RW */
+#define E1000_MSIXTADD(_i) (0x0C000 + ((_i) * 0x10))
+/* MSI-X Table entry addr upper reg 0 - RW */
+#define E1000_MSIXTUADD(_i) (0x0C004 + ((_i) * 0x10))
+/* MSI-X Table entry message reg 0 - RW */
+#define E1000_MSIXTMSG(_i) (0x0C008 + ((_i) * 0x10))
+/* MSI-X Table entry vector ctrl reg 0 - RW */
+#define E1000_MSIXVCTRL(_i) (0x0C00C + ((_i) * 0x10))
+/* Redirection Table - RW Array */
+#define E1000_RETA(_i) (0x05C00 + ((_i) * 4))
+#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
+
+#define E1000_REGISTER(a, reg) reg
+
+#define wr32(reg, value) (writel(value, hw->hw_addr + reg))
+#define rd32(reg) (readl(hw->hw_addr + reg))
+#define wrfl() ((void)rd32(E1000_STATUS))
+
+#define array_wr32(reg, offset, value) \
+ (writel(value, hw->hw_addr + reg + ((offset) << 2)))
+#define array_rd32(reg, offset) \
+ (readl(hw->hw_addr + reg + ((offset) << 2)))
+
+#endif
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
new file mode 100644
index 000000000000..6b2e7d351d65
--- /dev/null
+++ b/drivers/net/igb/igb.h
@@ -0,0 +1,300 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _IGB_H_
+#define _IGB_H_
+
+#include "e1000_mac.h"
+#include "e1000_82575.h"
+
+struct igb_adapter;
+
+/* Interrupt defines */
+#define IGB_MAX_TX_CLEAN 72
+
+#define IGB_MIN_DYN_ITR 3000
+#define IGB_MAX_DYN_ITR 96000
+#define IGB_START_ITR 6000
+
+#define IGB_DYN_ITR_PACKET_THRESHOLD 2
+#define IGB_DYN_ITR_LENGTH_LOW 200
+#define IGB_DYN_ITR_LENGTH_HIGH 1000
+
+/* TX/RX descriptor defines */
+#define IGB_DEFAULT_TXD 256
+#define IGB_MIN_TXD 80
+#define IGB_MAX_TXD 4096
+
+#define IGB_DEFAULT_RXD 256
+#define IGB_MIN_RXD 80
+#define IGB_MAX_RXD 4096
+
+#define IGB_DEFAULT_ITR 3 /* dynamic */
+#define IGB_MAX_ITR_USECS 10000
+#define IGB_MIN_ITR_USECS 10
+
+/* Transmit and receive queues */
+#define IGB_MAX_RX_QUEUES 4
+
+/* RX descriptor control thresholds.
+ * PTHRESH - MAC will consider prefetch if it has fewer than this number of
+ * descriptors available in its onboard memory.
+ * Setting this to 0 disables RX descriptor prefetch.
+ * HTHRESH - MAC will only prefetch if there are at least this many descriptors
+ * available in host memory.
+ * If PTHRESH is 0, this should also be 0.
+ * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
+ * descriptors until either it has this many to write back, or the
+ * ITR timer expires.
+ */
+#define IGB_RX_PTHRESH 16
+#define IGB_RX_HTHRESH 8
+#define IGB_RX_WTHRESH 1
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define IGB_RXBUFFER_128 128 /* Used for packet split */
+#define IGB_RXBUFFER_256 256 /* Used for packet split */
+#define IGB_RXBUFFER_512 512
+#define IGB_RXBUFFER_1024 1024
+#define IGB_RXBUFFER_2048 2048
+#define IGB_RXBUFFER_4096 4096
+#define IGB_RXBUFFER_8192 8192
+#define IGB_RXBUFFER_16384 16384
+
+/* Packet Buffer allocations */
+
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define IGB_TX_QUEUE_WAKE 16
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define IGB_EEPROM_APME 0x0400
+
+#ifndef IGB_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define IGB_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define IGB_MNG_VLAN_NONE -1
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct igb_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ union {
+ /* TX */
+ struct {
+ unsigned long time_stamp;
+ u32 length;
+ };
+ /* RX */
+ struct {
+ struct page *page;
+ u64 page_dma;
+ };
+ };
+};
+
+struct igb_queue_stats {
+ u64 packets;
+ u64 bytes;
+};
+
+struct igb_ring {
+ struct igb_adapter *adapter; /* backlink */
+ void *desc; /* descriptor ring memory */
+ dma_addr_t dma; /* phys address of the ring */
+ unsigned int size; /* length of desc. ring in bytes */
+ unsigned int count; /* number of desc. in the ring */
+ u16 next_to_use;
+ u16 next_to_clean;
+ u16 head;
+ u16 tail;
+ struct igb_buffer *buffer_info; /* array of buffer info structs */
+
+ u32 eims_value;
+ u32 itr_val;
+ u16 itr_register;
+ u16 cpu;
+
+ unsigned int total_bytes;
+ unsigned int total_packets;
+
+ union {
+ /* TX */
+ struct {
+ spinlock_t tx_clean_lock;
+ spinlock_t tx_lock;
+ bool detect_tx_hung;
+ };
+ /* RX */
+ struct {
+ /* arrays of page information for packet split */
+ struct sk_buff *pending_skb;
+ int pending_skb_page;
+ int no_itr_adjust;
+ struct igb_queue_stats rx_stats;
+ struct napi_struct napi;
+ };
+ };
+
+ char name[IFNAMSIZ + 5];
+};
+
+#define IGB_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
+ (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define E1000_RX_DESC_ADV(R, i) \
+ (&(((union e1000_adv_rx_desc *)((R).desc))[i]))
+#define E1000_TX_DESC_ADV(R, i) \
+ (&(((union e1000_adv_tx_desc *)((R).desc))[i]))
+#define E1000_TX_CTXTDESC_ADV(R, i) \
+ (&(((struct e1000_adv_tx_context_desc *)((R).desc))[i]))
+#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
+#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
+
+/* board specific private data structure */
+
+struct igb_adapter {
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+ struct vlan_group *vlgrp;
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 wol;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+ int set_itr;
+
+ struct work_struct reset_task;
+ struct work_struct watchdog_task;
+ bool fc_autoneg;
+ u8 tx_timeout_factor;
+ struct timer_list blink_timer;
+ unsigned long led_status;
+
+ /* TX */
+ struct igb_ring *tx_ring; /* One per active queue */
+ unsigned int restart_queue;
+ unsigned long tx_queue_len;
+ u32 txd_cmd;
+ u32 gotc;
+ u64 gotc_old;
+ u64 tpt_old;
+ u64 colc_old;
+ u32 tx_timeout_count;
+
+ /* RX */
+ struct igb_ring *rx_ring; /* One per active queue */
+ int num_tx_queues;
+ int num_rx_queues;
+
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u64 rx_hdr_split;
+ u32 alloc_rx_buff_failed;
+ bool rx_csum;
+ u32 gorc;
+ u64 gorc_old;
+ u16 rx_ps_hdr_size;
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct napi_struct napi;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+ struct e1000_phy_stats phy_stats;
+
+ u32 test_icr;
+ struct igb_ring test_tx_ring;
+ struct igb_ring test_rx_ring;
+
+ int msg_enable;
+ struct msix_entry *msix_entries;
+ u32 eims_enable_mask;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ unsigned long state;
+ unsigned int msi_enabled;
+
+ u32 eeprom_wol;
+};
+
+enum e1000_state_t {
+ __IGB_TESTING,
+ __IGB_RESETTING,
+ __IGB_DOWN
+};
+
+enum igb_boards {
+ board_82575,
+};
+
+extern char igb_driver_name[];
+extern char igb_driver_version[];
+
+extern char *igb_get_hw_dev_name(struct e1000_hw *hw);
+extern int igb_up(struct igb_adapter *);
+extern void igb_down(struct igb_adapter *);
+extern void igb_reinit_locked(struct igb_adapter *);
+extern void igb_reset(struct igb_adapter *);
+extern int igb_set_spd_dplx(struct igb_adapter *, u16);
+extern int igb_setup_tx_resources(struct igb_adapter *, struct igb_ring *);
+extern int igb_setup_rx_resources(struct igb_adapter *, struct igb_ring *);
+extern void igb_update_stats(struct igb_adapter *);
+extern void igb_set_ethtool_ops(struct net_device *);
+
+#endif /* _IGB_H_ */
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
new file mode 100644
index 000000000000..f69721e4eaa1
--- /dev/null
+++ b/drivers/net/igb/igb_ethtool.c
@@ -0,0 +1,1927 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for igb */
+
+#include <linux/vmalloc.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/ethtool.h>
+
+#include "igb.h"
+
+struct igb_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define IGB_STAT(m) sizeof(((struct igb_adapter *)0)->m), \
+ offsetof(struct igb_adapter, m)
+static const struct igb_stats igb_gstrings_stats[] = {
+ { "rx_packets", IGB_STAT(stats.gprc) },
+ { "tx_packets", IGB_STAT(stats.gptc) },
+ { "rx_bytes", IGB_STAT(stats.gorc) },
+ { "tx_bytes", IGB_STAT(stats.gotc) },
+ { "rx_broadcast", IGB_STAT(stats.bprc) },
+ { "tx_broadcast", IGB_STAT(stats.bptc) },
+ { "rx_multicast", IGB_STAT(stats.mprc) },
+ { "tx_multicast", IGB_STAT(stats.mptc) },
+ { "rx_errors", IGB_STAT(net_stats.rx_errors) },
+ { "tx_errors", IGB_STAT(net_stats.tx_errors) },
+ { "tx_dropped", IGB_STAT(net_stats.tx_dropped) },
+ { "multicast", IGB_STAT(stats.mprc) },
+ { "collisions", IGB_STAT(stats.colc) },
+ { "rx_length_errors", IGB_STAT(net_stats.rx_length_errors) },
+ { "rx_over_errors", IGB_STAT(net_stats.rx_over_errors) },
+ { "rx_crc_errors", IGB_STAT(stats.crcerrs) },
+ { "rx_frame_errors", IGB_STAT(net_stats.rx_frame_errors) },
+ { "rx_no_buffer_count", IGB_STAT(stats.rnbc) },
+ { "rx_missed_errors", IGB_STAT(stats.mpc) },
+ { "tx_aborted_errors", IGB_STAT(stats.ecol) },
+ { "tx_carrier_errors", IGB_STAT(stats.tncrs) },
+ { "tx_fifo_errors", IGB_STAT(net_stats.tx_fifo_errors) },
+ { "tx_heartbeat_errors", IGB_STAT(net_stats.tx_heartbeat_errors) },
+ { "tx_window_errors", IGB_STAT(stats.latecol) },
+ { "tx_abort_late_coll", IGB_STAT(stats.latecol) },
+ { "tx_deferred_ok", IGB_STAT(stats.dc) },
+ { "tx_single_coll_ok", IGB_STAT(stats.scc) },
+ { "tx_multi_coll_ok", IGB_STAT(stats.mcc) },
+ { "tx_timeout_count", IGB_STAT(tx_timeout_count) },
+ { "tx_restart_queue", IGB_STAT(restart_queue) },
+ { "rx_long_length_errors", IGB_STAT(stats.roc) },
+ { "rx_short_length_errors", IGB_STAT(stats.ruc) },
+ { "rx_align_errors", IGB_STAT(stats.algnerrc) },
+ { "tx_tcp_seg_good", IGB_STAT(stats.tsctc) },
+ { "tx_tcp_seg_failed", IGB_STAT(stats.tsctfc) },
+ { "rx_flow_control_xon", IGB_STAT(stats.xonrxc) },
+ { "rx_flow_control_xoff", IGB_STAT(stats.xoffrxc) },
+ { "tx_flow_control_xon", IGB_STAT(stats.xontxc) },
+ { "tx_flow_control_xoff", IGB_STAT(stats.xofftxc) },
+ { "rx_long_byte_count", IGB_STAT(stats.gorc) },
+ { "rx_csum_offload_good", IGB_STAT(hw_csum_good) },
+ { "rx_csum_offload_errors", IGB_STAT(hw_csum_err) },
+ { "rx_header_split", IGB_STAT(rx_hdr_split) },
+ { "alloc_rx_buff_failed", IGB_STAT(alloc_rx_buff_failed) },
+ { "tx_smbus", IGB_STAT(stats.mgptc) },
+ { "rx_smbus", IGB_STAT(stats.mgprc) },
+ { "dropped_smbus", IGB_STAT(stats.mgpdc) },
+};
+
+#define IGB_QUEUE_STATS_LEN \
+ ((((((struct igb_adapter *)netdev->priv)->num_rx_queues > 1) ? \
+ ((struct igb_adapter *)netdev->priv)->num_rx_queues : 0) + \
+ (((((struct igb_adapter *)netdev->priv)->num_tx_queues > 1) ? \
+ ((struct igb_adapter *)netdev->priv)->num_tx_queues : 0))) * \
+ (sizeof(struct igb_queue_stats) / sizeof(u64)))
+#define IGB_GLOBAL_STATS_LEN \
+ sizeof(igb_gstrings_stats) / sizeof(struct igb_stats)
+#define IGB_STATS_LEN (IGB_GLOBAL_STATS_LEN + IGB_QUEUE_STATS_LEN)
+static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define IGB_TEST_LEN sizeof(igb_gstrings_test) / ETH_GSTRING_LEN
+
+static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->phy.media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->mac.autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->phy.autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy.addr;
+ } else {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
+
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg);
+
+ ecmd->port = PORT_FIBRE;
+ }
+
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ if (rd32(E1000_STATUS) & E1000_STATUS_LU) {
+
+ adapter->hw.mac.ops.get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+ ecmd->speed = adapter->link_speed;
+
+ /* unfortunately FULL_DUPLEX != DUPLEX_FULL
+ * and HALF_DUPLEX != DUPLEX_HALF */
+
+ if (adapter->link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
+ hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ return 0;
+}
+
+static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed */
+ if (igb_check_reset_block(hw)) {
+ dev_err(&adapter->pdev->dev, "Cannot change link "
+ "characteristics when SoL/IDER is active.\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->mac.autoneg = 1;
+ if (hw->phy.media_type == e1000_media_type_fiber)
+ hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ else
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ ecmd->advertising = hw->phy.autoneg_advertised;
+ } else
+ if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return -EINVAL;
+ }
+
+ /* reset the link */
+
+ if (netif_running(adapter->netdev)) {
+ igb_down(adapter);
+ igb_up(adapter);
+ } else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return 0;
+}
+
+static void igb_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc.type == e1000_fc_rx_pause)
+ pause->rx_pause = 1;
+ else if (hw->fc.type == e1000_fc_tx_pause)
+ pause->tx_pause = 1;
+ else if (hw->fc.type == e1000_fc_full) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int igb_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc.type = e1000_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc.type = e1000_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc.type = e1000_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc.type = e1000_fc_none;
+
+ hw->fc.original_type = hw->fc.type;
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ if (netif_running(adapter->netdev)) {
+ igb_down(adapter);
+ igb_up(adapter);
+ } else
+ igb_reset(adapter);
+ } else
+ retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
+ igb_setup_link(hw) : igb_force_mac_fc(hw));
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return retval;
+}
+
+static u32 igb_get_rx_csum(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->rx_csum;
+}
+
+static int igb_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ adapter->rx_csum = data;
+
+ return 0;
+}
+
+static u32 igb_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int igb_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+static int igb_set_tso(struct net_device *netdev, u32 data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (data)
+ netdev->features |= NETIF_F_TSO;
+ else
+ netdev->features &= ~NETIF_F_TSO;
+
+ if (data)
+ netdev->features |= NETIF_F_TSO6;
+ else
+ netdev->features &= ~NETIF_F_TSO6;
+
+ dev_info(&adapter->pdev->dev, "TSO is %s\n",
+ data ? "Enabled" : "Disabled");
+ return 0;
+}
+
+static u32 igb_get_msglevel(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void igb_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int igb_get_regs_len(struct net_device *netdev)
+{
+#define IGB_REGS_LEN 551
+ return IGB_REGS_LEN * sizeof(u32);
+}
+
+static void igb_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u8 i;
+
+ memset(p, 0, IGB_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ /* General Registers */
+ regs_buff[0] = rd32(E1000_CTRL);
+ regs_buff[1] = rd32(E1000_STATUS);
+ regs_buff[2] = rd32(E1000_CTRL_EXT);
+ regs_buff[3] = rd32(E1000_MDIC);
+ regs_buff[4] = rd32(E1000_SCTL);
+ regs_buff[5] = rd32(E1000_CONNSW);
+ regs_buff[6] = rd32(E1000_VET);
+ regs_buff[7] = rd32(E1000_LEDCTL);
+ regs_buff[8] = rd32(E1000_PBA);
+ regs_buff[9] = rd32(E1000_PBS);
+ regs_buff[10] = rd32(E1000_FRTIMER);
+ regs_buff[11] = rd32(E1000_TCPTIMER);
+
+ /* NVM Register */
+ regs_buff[12] = rd32(E1000_EECD);
+
+ /* Interrupt */
+ regs_buff[13] = rd32(E1000_EICR);
+ regs_buff[14] = rd32(E1000_EICS);
+ regs_buff[15] = rd32(E1000_EIMS);
+ regs_buff[16] = rd32(E1000_EIMC);
+ regs_buff[17] = rd32(E1000_EIAC);
+ regs_buff[18] = rd32(E1000_EIAM);
+ regs_buff[19] = rd32(E1000_ICR);
+ regs_buff[20] = rd32(E1000_ICS);
+ regs_buff[21] = rd32(E1000_IMS);
+ regs_buff[22] = rd32(E1000_IMC);
+ regs_buff[23] = rd32(E1000_IAC);
+ regs_buff[24] = rd32(E1000_IAM);
+ regs_buff[25] = rd32(E1000_IMIRVP);
+
+ /* Flow Control */
+ regs_buff[26] = rd32(E1000_FCAL);
+ regs_buff[27] = rd32(E1000_FCAH);
+ regs_buff[28] = rd32(E1000_FCTTV);
+ regs_buff[29] = rd32(E1000_FCRTL);
+ regs_buff[30] = rd32(E1000_FCRTH);
+ regs_buff[31] = rd32(E1000_FCRTV);
+
+ /* Receive */
+ regs_buff[32] = rd32(E1000_RCTL);
+ regs_buff[33] = rd32(E1000_RXCSUM);
+ regs_buff[34] = rd32(E1000_RLPML);
+ regs_buff[35] = rd32(E1000_RFCTL);
+ regs_buff[36] = rd32(E1000_MRQC);
+ regs_buff[37] = rd32(E1000_VMD_CTL);
+
+ /* Transmit */
+ regs_buff[38] = rd32(E1000_TCTL);
+ regs_buff[39] = rd32(E1000_TCTL_EXT);
+ regs_buff[40] = rd32(E1000_TIPG);
+ regs_buff[41] = rd32(E1000_DTXCTL);
+
+ /* Wake Up */
+ regs_buff[42] = rd32(E1000_WUC);
+ regs_buff[43] = rd32(E1000_WUFC);
+ regs_buff[44] = rd32(E1000_WUS);
+ regs_buff[45] = rd32(E1000_IPAV);
+ regs_buff[46] = rd32(E1000_WUPL);
+
+ /* MAC */
+ regs_buff[47] = rd32(E1000_PCS_CFG0);
+ regs_buff[48] = rd32(E1000_PCS_LCTL);
+ regs_buff[49] = rd32(E1000_PCS_LSTAT);
+ regs_buff[50] = rd32(E1000_PCS_ANADV);
+ regs_buff[51] = rd32(E1000_PCS_LPAB);
+ regs_buff[52] = rd32(E1000_PCS_NPTX);
+ regs_buff[53] = rd32(E1000_PCS_LPABNP);
+
+ /* Statistics */
+ regs_buff[54] = adapter->stats.crcerrs;
+ regs_buff[55] = adapter->stats.algnerrc;
+ regs_buff[56] = adapter->stats.symerrs;
+ regs_buff[57] = adapter->stats.rxerrc;
+ regs_buff[58] = adapter->stats.mpc;
+ regs_buff[59] = adapter->stats.scc;
+ regs_buff[60] = adapter->stats.ecol;
+ regs_buff[61] = adapter->stats.mcc;
+ regs_buff[62] = adapter->stats.latecol;
+ regs_buff[63] = adapter->stats.colc;
+ regs_buff[64] = adapter->stats.dc;
+ regs_buff[65] = adapter->stats.tncrs;
+ regs_buff[66] = adapter->stats.sec;
+ regs_buff[67] = adapter->stats.htdpmc;
+ regs_buff[68] = adapter->stats.rlec;
+ regs_buff[69] = adapter->stats.xonrxc;
+ regs_buff[70] = adapter->stats.xontxc;
+ regs_buff[71] = adapter->stats.xoffrxc;
+ regs_buff[72] = adapter->stats.xofftxc;
+ regs_buff[73] = adapter->stats.fcruc;
+ regs_buff[74] = adapter->stats.prc64;
+ regs_buff[75] = adapter->stats.prc127;
+ regs_buff[76] = adapter->stats.prc255;
+ regs_buff[77] = adapter->stats.prc511;
+ regs_buff[78] = adapter->stats.prc1023;
+ regs_buff[79] = adapter->stats.prc1522;
+ regs_buff[80] = adapter->stats.gprc;
+ regs_buff[81] = adapter->stats.bprc;
+ regs_buff[82] = adapter->stats.mprc;
+ regs_buff[83] = adapter->stats.gptc;
+ regs_buff[84] = adapter->stats.gorc;
+ regs_buff[86] = adapter->stats.gotc;
+ regs_buff[88] = adapter->stats.rnbc;
+ regs_buff[89] = adapter->stats.ruc;
+ regs_buff[90] = adapter->stats.rfc;
+ regs_buff[91] = adapter->stats.roc;
+ regs_buff[92] = adapter->stats.rjc;
+ regs_buff[93] = adapter->stats.mgprc;
+ regs_buff[94] = adapter->stats.mgpdc;
+ regs_buff[95] = adapter->stats.mgptc;
+ regs_buff[96] = adapter->stats.tor;
+ regs_buff[98] = adapter->stats.tot;
+ regs_buff[100] = adapter->stats.tpr;
+ regs_buff[101] = adapter->stats.tpt;
+ regs_buff[102] = adapter->stats.ptc64;
+ regs_buff[103] = adapter->stats.ptc127;
+ regs_buff[104] = adapter->stats.ptc255;
+ regs_buff[105] = adapter->stats.ptc511;
+ regs_buff[106] = adapter->stats.ptc1023;
+ regs_buff[107] = adapter->stats.ptc1522;
+ regs_buff[108] = adapter->stats.mptc;
+ regs_buff[109] = adapter->stats.bptc;
+ regs_buff[110] = adapter->stats.tsctc;
+ regs_buff[111] = adapter->stats.iac;
+ regs_buff[112] = adapter->stats.rpthc;
+ regs_buff[113] = adapter->stats.hgptc;
+ regs_buff[114] = adapter->stats.hgorc;
+ regs_buff[116] = adapter->stats.hgotc;
+ regs_buff[118] = adapter->stats.lenerrs;
+ regs_buff[119] = adapter->stats.scvpc;
+ regs_buff[120] = adapter->stats.hrmpc;
+
+ /* These should probably be added to e1000_regs.h instead */
+ #define E1000_PSRTYPE_REG(_i) (0x05480 + ((_i) * 4))
+ #define E1000_RAL(_i) (0x05400 + ((_i) * 8))
+ #define E1000_RAH(_i) (0x05404 + ((_i) * 8))
+ #define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
+ #define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
+ #define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+ #define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
+ #define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
+ #define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
+
+ for (i = 0; i < 4; i++)
+ regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[125 + i] = rd32(E1000_PSRTYPE_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[129 + i] = rd32(E1000_RDBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[133 + i] = rd32(E1000_RDBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[137 + i] = rd32(E1000_RDLEN(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[141 + i] = rd32(E1000_RDH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[145 + i] = rd32(E1000_RDT(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[149 + i] = rd32(E1000_RXDCTL(i));
+
+ for (i = 0; i < 10; i++)
+ regs_buff[153 + i] = rd32(E1000_EITR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[163 + i] = rd32(E1000_IMIR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[171 + i] = rd32(E1000_IMIREXT(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[179 + i] = rd32(E1000_RAL(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[195 + i] = rd32(E1000_RAH(i));
+
+ for (i = 0; i < 4; i++)
+ regs_buff[211 + i] = rd32(E1000_TDBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[215 + i] = rd32(E1000_TDBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[219 + i] = rd32(E1000_TDLEN(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[223 + i] = rd32(E1000_TDH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[227 + i] = rd32(E1000_TDT(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[231 + i] = rd32(E1000_TXDCTL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[235 + i] = rd32(E1000_TDWBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[239 + i] = rd32(E1000_TDWBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[243 + i] = rd32(E1000_DCA_TXCTRL(i));
+
+ for (i = 0; i < 4; i++)
+ regs_buff[247 + i] = rd32(E1000_IP4AT_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[251 + i] = rd32(E1000_IP6AT_REG(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[255 + i] = rd32(E1000_WUPM_REG(i));
+ for (i = 0; i < 128; i++)
+ regs_buff[287 + i] = rd32(E1000_FFMT_REG(i));
+ for (i = 0; i < 128; i++)
+ regs_buff[415 + i] = rd32(E1000_FFVT_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[543 + i] = rd32(E1000_FFLT_REG(i));
+
+ regs_buff[547] = rd32(E1000_TDFH);
+ regs_buff[548] = rd32(E1000_TDFT);
+ regs_buff[549] = rd32(E1000_TDFHS);
+ regs_buff[550] = rd32(E1000_TDFPC);
+
+}
+
+static int igb_get_eeprom_len(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->hw.nvm.word_size * 2;
+}
+
+static int igb_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->nvm.type == e1000_nvm_eeprom_spi)
+ ret_val = hw->nvm.ops.read_nvm(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = hw->nvm.ops.read_nvm(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int igb_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->nvm.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ ret_val = hw->nvm.ops.read_nvm(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ ret_val = hw->nvm.ops.read_nvm(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = hw->nvm.ops.write_nvm(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum over the first part of the EEPROM if needed
+ * and flush shadow RAM for 82573 controllers */
+ if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG)))
+ igb_update_nvm_checksum(hw);
+
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void igb_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+ u16 eeprom_data;
+
+ strncpy(drvinfo->driver, igb_driver_name, 32);
+ strncpy(drvinfo->version, igb_driver_version, 32);
+
+ /* EEPROM image version # is reported as firmware version # for
+ * 82575 controllers */
+ adapter->hw.nvm.ops.read_nvm(&adapter->hw, 5, 1, &eeprom_data);
+ sprintf(firmware_version, "%d.%d-%d",
+ (eeprom_data & 0xF000) >> 12,
+ (eeprom_data & 0x0FF0) >> 4,
+ eeprom_data & 0x000F);
+
+ strncpy(drvinfo->fw_version, firmware_version, 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->n_stats = IGB_STATS_LEN;
+ drvinfo->testinfo_len = IGB_TEST_LEN;
+ drvinfo->regdump_len = igb_get_regs_len(netdev);
+ drvinfo->eedump_len = igb_get_eeprom_len(netdev);
+}
+
+static void igb_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct igb_ring *tx_ring = adapter->tx_ring;
+ struct igb_ring *rx_ring = adapter->rx_ring;
+
+ ring->rx_max_pending = IGB_MAX_RXD;
+ ring->tx_max_pending = IGB_MAX_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rx_ring->count;
+ ring->tx_pending = tx_ring->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int igb_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct igb_buffer *old_buf;
+ struct igb_buffer *old_rx_buf;
+ void *old_desc;
+ int i, err;
+ u32 new_rx_count, new_tx_count, old_size;
+ dma_addr_t old_dma;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_rx_count = max(ring->rx_pending, (u32)IGB_MIN_RXD);
+ new_rx_count = min(new_rx_count, (u32)IGB_MAX_RXD);
+ new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ new_tx_count = max(ring->tx_pending, (u32)IGB_MIN_TXD);
+ new_tx_count = min(new_tx_count, (u32)IGB_MAX_TXD);
+ new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if ((new_tx_count == adapter->tx_ring->count) &&
+ (new_rx_count == adapter->rx_ring->count)) {
+ /* nothing to do */
+ return 0;
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (netif_running(adapter->netdev))
+ igb_down(adapter);
+
+ /*
+ * We can't just free everything and then setup again,
+ * because the ISRs in MSI-X mode get passed pointers
+ * to the tx and rx ring structs.
+ */
+ if (new_tx_count != adapter->tx_ring->count) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ /* Save existing descriptor ring */
+ old_buf = adapter->tx_ring[i].buffer_info;
+ old_desc = adapter->tx_ring[i].desc;
+ old_size = adapter->tx_ring[i].size;
+ old_dma = adapter->tx_ring[i].dma;
+ /* Try to allocate a new one */
+ adapter->tx_ring[i].buffer_info = NULL;
+ adapter->tx_ring[i].desc = NULL;
+ adapter->tx_ring[i].count = new_tx_count;
+ err = igb_setup_tx_resources(adapter,
+ &adapter->tx_ring[i]);
+ if (err) {
+ /* Restore the old one so at least
+ the adapter still works, even if
+ we failed the request */
+ adapter->tx_ring[i].buffer_info = old_buf;
+ adapter->tx_ring[i].desc = old_desc;
+ adapter->tx_ring[i].size = old_size;
+ adapter->tx_ring[i].dma = old_dma;
+ goto err_setup;
+ }
+ /* Free the old buffer manually */
+ vfree(old_buf);
+ pci_free_consistent(adapter->pdev, old_size,
+ old_desc, old_dma);
+ }
+ }
+
+ if (new_rx_count != adapter->rx_ring->count) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+
+ old_rx_buf = adapter->rx_ring[i].buffer_info;
+ old_desc = adapter->rx_ring[i].desc;
+ old_size = adapter->rx_ring[i].size;
+ old_dma = adapter->rx_ring[i].dma;
+
+ adapter->rx_ring[i].buffer_info = NULL;
+ adapter->rx_ring[i].desc = NULL;
+ adapter->rx_ring[i].dma = 0;
+ adapter->rx_ring[i].count = new_rx_count;
+ err = igb_setup_rx_resources(adapter,
+ &adapter->rx_ring[i]);
+ if (err) {
+ adapter->rx_ring[i].buffer_info = old_rx_buf;
+ adapter->rx_ring[i].desc = old_desc;
+ adapter->rx_ring[i].size = old_size;
+ adapter->rx_ring[i].dma = old_dma;
+ goto err_setup;
+ }
+
+ vfree(old_rx_buf);
+ pci_free_consistent(adapter->pdev, old_size, old_desc,
+ old_dma);
+ }
+ }
+
+ err = 0;
+err_setup:
+ if (netif_running(adapter->netdev))
+ igb_up(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return err;
+}
+
+/* ethtool register test data */
+struct igb_reg_test {
+ u16 reg;
+ u8 array_len;
+ u8 test_type;
+ u32 mask;
+ u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x100 bytes apart, or in contiguous tables. We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST 1
+#define SET_READ_TEST 2
+#define WRITE_NO_TEST 3
+#define TABLE32_TEST 4
+#define TABLE64_TEST_LO 5
+#define TABLE64_TEST_HI 6
+
+/* default register test */
+static struct igb_reg_test reg_test_82575[] = {
+ { E1000_FCAL, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* Enable all four RX queues before testing. */
+ { E1000_RXDCTL(0), 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
+ /* RDH is read-only for 82575, only test RDT. */
+ { E1000_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+ { E1000_FCRTH, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_RCTL, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB },
+ { E1000_RCTL, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF },
+ { E1000_TCTL, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_TXCW, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF },
+ { E1000_RA, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ u32 pat, val;
+ u32 _test[] =
+ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
+ writel((_test[pat] & write), (adapter->hw.hw_addr + reg));
+ val = readl(adapter->hw.hw_addr + reg);
+ if (val != (_test[pat] & write & mask)) {
+ dev_err(&adapter->pdev->dev, "pattern test reg %04X "
+ "failed: got 0x%08X expected 0x%08X\n",
+ reg, val, (_test[pat] & write & mask));
+ *data = reg;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ u32 val;
+ writel((write & mask), (adapter->hw.hw_addr + reg));
+ val = readl(adapter->hw.hw_addr + reg);
+ if ((write & mask) != (val & mask)) {
+ dev_err(&adapter->pdev->dev, "set/check reg %04X test failed:"
+ " got 0x%08X expected 0x%08X\n", reg,
+ (val & mask), (write & mask));
+ *data = reg;
+ return 1;
+ }
+ return 0;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+static int igb_reg_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_reg_test *test;
+ u32 value, before, after;
+ u32 i, toggle;
+
+ toggle = 0x7FFFF3FF;
+ test = reg_test_82575;
+
+ /* Because the status register is such a special case,
+ * we handle it separately from the rest of the register
+ * tests. Some bits are read-only, some toggle, and some
+ * are writable on newer MACs.
+ */
+ before = rd32(E1000_STATUS);
+ value = (rd32(E1000_STATUS) & toggle);
+ wr32(E1000_STATUS, toggle);
+ after = rd32(E1000_STATUS) & toggle;
+ if (value != after) {
+ dev_err(&adapter->pdev->dev, "failed STATUS register test "
+ "got: 0x%08X expected: 0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ wr32(E1000_STATUS, before);
+
+ /* Perform the remainder of the register test, looping through
+ * the test table until we either fail or reach the null entry.
+ */
+ while (test->reg) {
+ for (i = 0; i < test->array_len; i++) {
+ switch (test->test_type) {
+ case PATTERN_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 0x100),
+ test->mask,
+ test->write);
+ break;
+ case SET_READ_TEST:
+ REG_SET_AND_CHECK(test->reg + (i * 0x100),
+ test->mask,
+ test->write);
+ break;
+ case WRITE_NO_TEST:
+ writel(test->write,
+ (adapter->hw.hw_addr + test->reg)
+ + (i * 0x100));
+ break;
+ case TABLE32_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 4),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_LO:
+ REG_PATTERN_TEST(test->reg + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_HI:
+ REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ }
+ }
+ test++;
+ }
+
+ *data = 0;
+ return 0;
+}
+
+static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data)
+{
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
+
+ *data = 0;
+ /* Read and add up the contents of the EEPROM */
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ if ((adapter->hw.nvm.ops.read_nvm(&adapter->hw, i, 1, &temp))
+ < 0) {
+ *data = 1;
+ break;
+ }
+ checksum += temp;
+ }
+
+ /* If Checksum is not Correct return error else test passed */
+ if ((checksum != (u16) NVM_SUM) && !(*data))
+ *data = 2;
+
+ return *data;
+}
+
+static irqreturn_t igb_test_intr(int irq, void *data)
+{
+ struct net_device *netdev = (struct net_device *) data;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= rd32(E1000_ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, i = 0, shared_int = true;
+ u32 irq = adapter->pdev->irq;
+
+ *data = 0;
+
+ /* Hook up test interrupt handler just for this test */
+ if (adapter->msix_entries) {
+ /* NOTE: we don't test MSI-X interrupts here, yet */
+ return 0;
+ } else if (adapter->msi_enabled) {
+ shared_int = false;
+ if (request_irq(irq, &igb_test_intr, 0, netdev->name, netdev)) {
+ *data = 1;
+ return -1;
+ }
+ } else if (!request_irq(irq, &igb_test_intr, IRQF_PROBE_SHARED,
+ netdev->name, netdev)) {
+ shared_int = false;
+ } else if (request_irq(irq, &igb_test_intr, IRQF_SHARED,
+ netdev->name, netdev)) {
+ *data = 1;
+ return -1;
+ }
+ dev_info(&adapter->pdev->dev, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ wr32(E1000_IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Test each interrupt */
+ for (; i < 10; i++) {
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ wr32(E1000_IMC, ~mask & 0x00007FFF);
+ wr32(E1000_ICS, ~mask & 0x00007FFF);
+ msleep(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ wr32(E1000_IMS, mask);
+ wr32(E1000_ICS, mask);
+ msleep(10);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ wr32(E1000_IMC, ~mask & 0x00007FFF);
+ wr32(E1000_ICS, ~mask & 0x00007FFF);
+ msleep(10);
+
+ if (adapter->test_icr) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ wr32(E1000_IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Unhook test interrupt handler */
+ free_irq(irq, netdev);
+
+ return *data;
+}
+
+static void igb_free_desc_rings(struct igb_adapter *adapter)
+{
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i;
+
+ if (tx_ring->desc && tx_ring->buffer_info) {
+ for (i = 0; i < tx_ring->count; i++) {
+ struct igb_buffer *buf = &(tx_ring->buffer_info[i]);
+ if (buf->dma)
+ pci_unmap_single(pdev, buf->dma, buf->length,
+ PCI_DMA_TODEVICE);
+ if (buf->skb)
+ dev_kfree_skb(buf->skb);
+ }
+ }
+
+ if (rx_ring->desc && rx_ring->buffer_info) {
+ for (i = 0; i < rx_ring->count; i++) {
+ struct igb_buffer *buf = &(rx_ring->buffer_info[i]);
+ if (buf->dma)
+ pci_unmap_single(pdev, buf->dma,
+ IGB_RXBUFFER_2048,
+ PCI_DMA_FROMDEVICE);
+ if (buf->skb)
+ dev_kfree_skb(buf->skb);
+ }
+ }
+
+ if (tx_ring->desc) {
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc,
+ tx_ring->dma);
+ tx_ring->desc = NULL;
+ }
+ if (rx_ring->desc) {
+ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+ rx_ring->desc = NULL;
+ }
+
+ kfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+ kfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ return;
+}
+
+static int igb_setup_desc_rings(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 rctl;
+ int i, ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+
+ if (!tx_ring->count)
+ tx_ring->count = IGB_DEFAULT_TXD;
+
+ tx_ring->buffer_info = kcalloc(tx_ring->count,
+ sizeof(struct igb_buffer),
+ GFP_KERNEL);
+ if (!tx_ring->buffer_info) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+ tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
+ &tx_ring->dma);
+ if (!tx_ring->desc) {
+ ret_val = 2;
+ goto err_nomem;
+ }
+ tx_ring->next_to_use = tx_ring->next_to_clean = 0;
+
+ wr32(E1000_TDBAL(0),
+ ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
+ wr32(E1000_TDBAH(0), ((u64) tx_ring->dma >> 32));
+ wr32(E1000_TDLEN(0),
+ tx_ring->count * sizeof(struct e1000_tx_desc));
+ wr32(E1000_TDH(0), 0);
+ wr32(E1000_TDT(0), 0);
+ wr32(E1000_TCTL,
+ E1000_TCTL_PSP | E1000_TCTL_EN |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+
+ for (i = 0; i < tx_ring->count; i++) {
+ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
+ struct sk_buff *skb;
+ unsigned int size = 1024;
+
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+ skb_put(skb, size);
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[i].length = skb->len;
+ tx_ring->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
+ tx_desc->lower.data = cpu_to_le32(skb->len);
+ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS |
+ E1000_TXD_CMD_RS);
+ tx_desc->upper.data = 0;
+ }
+
+ /* Setup Rx descriptor ring and Rx buffers */
+
+ if (!rx_ring->count)
+ rx_ring->count = IGB_DEFAULT_RXD;
+
+ rx_ring->buffer_info = kcalloc(rx_ring->count,
+ sizeof(struct igb_buffer),
+ GFP_KERNEL);
+ if (!rx_ring->buffer_info) {
+ ret_val = 4;
+ goto err_nomem;
+ }
+
+ rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
+ rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
+ &rx_ring->dma);
+ if (!rx_ring->desc) {
+ ret_val = 5;
+ goto err_nomem;
+ }
+ rx_ring->next_to_use = rx_ring->next_to_clean = 0;
+
+ rctl = rd32(E1000_RCTL);
+ wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
+ wr32(E1000_RDBAL(0),
+ ((u64) rx_ring->dma & 0xFFFFFFFF));
+ wr32(E1000_RDBAH(0),
+ ((u64) rx_ring->dma >> 32));
+ wr32(E1000_RDLEN(0), rx_ring->size);
+ wr32(E1000_RDH(0), 0);
+ wr32(E1000_RDT(0), 0);
+ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+ wr32(E1000_RCTL, rctl);
+ wr32(E1000_SRRCTL(0), 0);
+
+ for (i = 0; i < rx_ring->count; i++) {
+ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
+ struct sk_buff *skb;
+
+ skb = alloc_skb(IGB_RXBUFFER_2048 + NET_IP_ALIGN,
+ GFP_KERNEL);
+ if (!skb) {
+ ret_val = 6;
+ goto err_nomem;
+ }
+ skb_reserve(skb, NET_IP_ALIGN);
+ rx_ring->buffer_info[i].skb = skb;
+ rx_ring->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, IGB_RXBUFFER_2048,
+ PCI_DMA_FROMDEVICE);
+ rx_desc->buffer_addr = cpu_to_le64(rx_ring->buffer_info[i].dma);
+ memset(skb->data, 0x00, skb->len);
+ }
+
+ return 0;
+
+err_nomem:
+ igb_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void igb_phy_disable_receiver(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ hw->phy.ops.write_phy_reg(hw, 29, 0x001F);
+ hw->phy.ops.write_phy_reg(hw, 30, 0x8FFC);
+ hw->phy.ops.write_phy_reg(hw, 29, 0x001A);
+ hw->phy.ops.write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+ u32 stat_reg = 0;
+
+ hw->mac.autoneg = false;
+
+ if (hw->phy.type == e1000_phy_m88) {
+ /* Auto-MDI/MDIX Off */
+ hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x9140);
+ /* autoneg off */
+ hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x8140);
+ }
+
+ ctrl_reg = rd32(E1000_CTRL);
+
+ /* force 1000, set loopback */
+ hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = rd32(E1000_CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ if (hw->phy.media_type == e1000_media_type_copper &&
+ hw->phy.type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+ else {
+ /* Set the ILOS bit on the fiber Nic if half duplex link is
+ * detected. */
+ stat_reg = rd32(E1000_STATUS);
+ if ((stat_reg & E1000_STATUS_FD) == 0)
+ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
+ }
+
+ wr32(E1000_CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy.type == e1000_phy_m88)
+ igb_phy_disable_receiver(adapter);
+
+ udelay(500);
+
+ return 0;
+}
+
+static int igb_set_phy_loopback(struct igb_adapter *adapter)
+{
+ return igb_integrated_phy_loopback(adapter);
+}
+
+static int igb_setup_loopback_test(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
+ rctl = rd32(E1000_RCTL);
+ rctl |= E1000_RCTL_LBM_TCVR;
+ wr32(E1000_RCTL, rctl);
+ return 0;
+ } else if (hw->phy.media_type == e1000_media_type_copper) {
+ return igb_set_phy_loopback(adapter);
+ }
+
+ return 7;
+}
+
+static void igb_loopback_cleanup(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ wr32(E1000_RCTL, rctl);
+
+ hw->mac.autoneg = true;
+ hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_reg);
+ igb_phy_sw_reset(hw);
+ }
+}
+
+static void igb_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size &= ~1;
+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int igb_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
+{
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF)
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ (*(skb->data + frame_size / 2 + 12) == 0xAF))
+ return 0;
+ return 13;
+}
+
+static int igb_run_loopback_test(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i, j, k, l, lc, good_cnt;
+ int ret_val = 0;
+ unsigned long time;
+
+ wr32(E1000_RDT(0), rx_ring->count - 1);
+
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rx_ring->count <= tx_ring->count)
+ lc = ((tx_ring->count / 64) * 2) + 1;
+ else
+ lc = ((rx_ring->count / 64) * 2) + 1;
+
+ k = l = 0;
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
+ igb_create_lbtest_frame(tx_ring->buffer_info[k].skb,
+ 1024);
+ pci_dma_sync_single_for_device(pdev,
+ tx_ring->buffer_info[k].dma,
+ tx_ring->buffer_info[k].length,
+ PCI_DMA_TODEVICE);
+ k++;
+ if (k == tx_ring->count)
+ k = 0;
+ }
+ wr32(E1000_TDT(0), k);
+ msleep(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ pci_dma_sync_single_for_cpu(pdev,
+ rx_ring->buffer_info[l].dma,
+ IGB_RXBUFFER_2048,
+ PCI_DMA_FROMDEVICE);
+
+ ret_val = igb_check_lbtest_frame(
+ rx_ring->buffer_info[l].skb, 1024);
+ if (!ret_val)
+ good_cnt++;
+ l++;
+ if (l == rx_ring->count)
+ l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while (good_cnt < 64 && jiffies < (time + 20));
+ if (good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if (jiffies >= (time + 20)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
+ return ret_val;
+}
+
+static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
+{
+ /* PHY loopback cannot be performed if SoL/IDER
+ * sessions are active */
+ if (igb_check_reset_block(&adapter->hw)) {
+ dev_err(&adapter->pdev->dev,
+ "Cannot do PHY loopback test "
+ "when SoL/IDER is active.\n");
+ *data = 0;
+ goto out;
+ }
+ *data = igb_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = igb_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = igb_run_loopback_test(adapter);
+ igb_loopback_cleanup(adapter);
+
+err_loopback:
+ igb_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int igb_link_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+ hw->mac.serdes_has_link = false;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes */
+ do {
+ hw->mac.ops.check_for_link(&adapter->hw);
+ if (hw->mac.serdes_has_link)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ hw->mac.ops.check_for_link(&adapter->hw);
+ if (hw->mac.autoneg)
+ msleep(4000);
+
+ if (!(rd32(E1000_STATUS) &
+ E1000_STATUS_LU))
+ *data = 1;
+ }
+ return *data;
+}
+
+static void igb_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u16 autoneg_advertised;
+ u8 forced_speed_duplex, autoneg;
+ bool if_running = netif_running(netdev);
+
+ set_bit(__IGB_TESTING, &adapter->state);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ autoneg_advertised = adapter->hw.phy.autoneg_advertised;
+ forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
+ autoneg = adapter->hw.mac.autoneg;
+
+ dev_info(&adapter->pdev->dev, "offline testing starting\n");
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (igb_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ igb_reset(adapter);
+
+ if (igb_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ adapter->hw.phy.autoneg_advertised = autoneg_advertised;
+ adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
+ adapter->hw.mac.autoneg = autoneg;
+
+ /* force this routine to wait until autoneg complete/timeout */
+ adapter->hw.phy.autoneg_wait_to_complete = true;
+ igb_reset(adapter);
+ adapter->hw.phy.autoneg_wait_to_complete = false;
+
+ clear_bit(__IGB_TESTING, &adapter->state);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ dev_info(&adapter->pdev->dev, "online testing starting\n");
+ /* Online tests */
+ if (igb_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__IGB_TESTING, &adapter->state);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static int igb_wol_exclusion(struct igb_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 1; /* fail by default */
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ /* WoL not supported */
+ wol->supported = 0;
+ break;
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ /* Wake events not supported on port B */
+ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ default:
+ /* dual port cards only support WoL on port A from now on
+ * unless it was enabled in the eeprom for port B
+ * so exclude FUNC_1 ports from having WoL enabled */
+ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1 &&
+ !adapter->eeprom_wol) {
+ wol->supported = 0;
+ break;
+ }
+
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ /* this function will set ->supported = 0 and return 1 if wol is not
+ * supported by this hardware */
+ if (igb_wol_exclusion(adapter, wol))
+ return;
+
+ /* apply any specific unsupported masks here */
+ switch (adapter->hw.device_id) {
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+
+ return;
+}
+
+static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (igb_wol_exclusion(adapter, wol))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ switch (hw->device_id) {
+ default:
+ break;
+ }
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ return 0;
+}
+
+/* toggle LED 4 times per second = 2 "blinks" per second */
+#define IGB_ID_INTERVAL (HZ/4)
+
+/* bit defines for adapter->led_status */
+#define IGB_LED_ON 0
+
+static int igb_phys_id(struct net_device *netdev, u32 data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+ data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+
+ igb_blink_led(hw);
+ msleep_interruptible(data * 1000);
+
+ igb_led_off(hw);
+ clear_bit(IGB_LED_ON, &adapter->led_status);
+ igb_cleanup_led(hw);
+
+ return 0;
+}
+
+static int igb_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ /* convert to rate of irq's per second */
+ if (ec->rx_coalesce_usecs <= 3)
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ else
+ adapter->itr_setting = (1000000 / ec->rx_coalesce_usecs);
+
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+
+ return 0;
+}
+
+static int igb_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+ return 0;
+}
+
+
+static int igb_nway_reset(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ return 0;
+}
+
+static int igb_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return IGB_STATS_LEN;
+ case ETH_SS_TEST:
+ return IGB_TEST_LEN;
+ default:
+ return -ENOTSUPP;
+ }
+}
+
+static void igb_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u64 *queue_stat;
+ int stat_count = sizeof(struct igb_queue_stats) / sizeof(u64);
+ int j;
+ int i;
+
+ igb_update_stats(adapter);
+ for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+ char *p = (char *)adapter+igb_gstrings_stats[i].stat_offset;
+ data[i] = (igb_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < adapter->num_rx_queues; j++) {
+ int k;
+ queue_stat = (u64 *)&adapter->rx_ring[j].rx_stats;
+ for (k = 0; k < stat_count; k++)
+ data[i + k] = queue_stat[k];
+ i += k;
+ }
+}
+
+static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *igb_gstrings_test,
+ IGB_TEST_LEN*ETH_GSTRING_LEN);
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, igb_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ sprintf(p, "tx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ sprintf(p, "rx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ }
+/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static struct ethtool_ops igb_ethtool_ops = {
+ .get_settings = igb_get_settings,
+ .set_settings = igb_set_settings,
+ .get_drvinfo = igb_get_drvinfo,
+ .get_regs_len = igb_get_regs_len,
+ .get_regs = igb_get_regs,
+ .get_wol = igb_get_wol,
+ .set_wol = igb_set_wol,
+ .get_msglevel = igb_get_msglevel,
+ .set_msglevel = igb_set_msglevel,
+ .nway_reset = igb_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = igb_get_eeprom_len,
+ .get_eeprom = igb_get_eeprom,
+ .set_eeprom = igb_set_eeprom,
+ .get_ringparam = igb_get_ringparam,
+ .set_ringparam = igb_set_ringparam,
+ .get_pauseparam = igb_get_pauseparam,
+ .set_pauseparam = igb_set_pauseparam,
+ .get_rx_csum = igb_get_rx_csum,
+ .set_rx_csum = igb_set_rx_csum,
+ .get_tx_csum = igb_get_tx_csum,
+ .set_tx_csum = igb_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = igb_set_tso,
+ .self_test = igb_diag_test,
+ .get_strings = igb_get_strings,
+ .phys_id = igb_phys_id,
+ .get_sset_count = igb_get_sset_count,
+ .get_ethtool_stats = igb_get_ethtool_stats,
+ .get_coalesce = igb_get_coalesce,
+ .set_coalesce = igb_set_coalesce,
+};
+
+void igb_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &igb_ethtool_ops);
+}
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
new file mode 100644
index 000000000000..f3c144d5d72f
--- /dev/null
+++ b/drivers/net/igb/igb_main.c
@@ -0,0 +1,4138 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/netdevice.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+
+#include "igb.h"
+
+#define DRV_VERSION "1.0.8-k2"
+char igb_driver_name[] = "igb";
+char igb_driver_version[] = DRV_VERSION;
+static const char igb_driver_string[] =
+ "Intel(R) Gigabit Ethernet Network Driver";
+static const char igb_copyright[] = "Copyright (c) 2007 Intel Corporation.";
+
+
+static const struct e1000_info *igb_info_tbl[] = {
+ [board_82575] = &e1000_82575_info,
+};
+
+static struct pci_device_id igb_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
+ /* required last entry */
+ {0, }
+};
+
+MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
+
+void igb_reset(struct igb_adapter *);
+static int igb_setup_all_tx_resources(struct igb_adapter *);
+static int igb_setup_all_rx_resources(struct igb_adapter *);
+static void igb_free_all_tx_resources(struct igb_adapter *);
+static void igb_free_all_rx_resources(struct igb_adapter *);
+static void igb_free_tx_resources(struct igb_adapter *, struct igb_ring *);
+static void igb_free_rx_resources(struct igb_adapter *, struct igb_ring *);
+void igb_update_stats(struct igb_adapter *);
+static int igb_probe(struct pci_dev *, const struct pci_device_id *);
+static void __devexit igb_remove(struct pci_dev *pdev);
+static int igb_sw_init(struct igb_adapter *);
+static int igb_open(struct net_device *);
+static int igb_close(struct net_device *);
+static void igb_configure_tx(struct igb_adapter *);
+static void igb_configure_rx(struct igb_adapter *);
+static void igb_setup_rctl(struct igb_adapter *);
+static void igb_clean_all_tx_rings(struct igb_adapter *);
+static void igb_clean_all_rx_rings(struct igb_adapter *);
+static void igb_clean_tx_ring(struct igb_adapter *, struct igb_ring *);
+static void igb_clean_rx_ring(struct igb_adapter *, struct igb_ring *);
+static void igb_set_multi(struct net_device *);
+static void igb_update_phy_info(unsigned long);
+static void igb_watchdog(unsigned long);
+static void igb_watchdog_task(struct work_struct *);
+static int igb_xmit_frame_ring_adv(struct sk_buff *, struct net_device *,
+ struct igb_ring *);
+static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *);
+static struct net_device_stats *igb_get_stats(struct net_device *);
+static int igb_change_mtu(struct net_device *, int);
+static int igb_set_mac(struct net_device *, void *);
+static irqreturn_t igb_intr(int irq, void *);
+static irqreturn_t igb_intr_msi(int irq, void *);
+static irqreturn_t igb_msix_other(int irq, void *);
+static irqreturn_t igb_msix_rx(int irq, void *);
+static irqreturn_t igb_msix_tx(int irq, void *);
+static int igb_clean_rx_ring_msix(struct napi_struct *, int);
+static bool igb_clean_tx_irq(struct igb_adapter *, struct igb_ring *);
+static int igb_clean(struct napi_struct *, int);
+static bool igb_clean_rx_irq_adv(struct igb_adapter *,
+ struct igb_ring *, int *, int);
+static void igb_alloc_rx_buffers_adv(struct igb_adapter *,
+ struct igb_ring *, int);
+static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
+static void igb_tx_timeout(struct net_device *);
+static void igb_reset_task(struct work_struct *);
+static void igb_vlan_rx_register(struct net_device *, struct vlan_group *);
+static void igb_vlan_rx_add_vid(struct net_device *, u16);
+static void igb_vlan_rx_kill_vid(struct net_device *, u16);
+static void igb_restore_vlan(struct igb_adapter *);
+
+static int igb_suspend(struct pci_dev *, pm_message_t);
+#ifdef CONFIG_PM
+static int igb_resume(struct pci_dev *);
+#endif
+static void igb_shutdown(struct pci_dev *);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void igb_netpoll(struct net_device *);
+#endif
+
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
+ pci_channel_state_t);
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
+static void igb_io_resume(struct pci_dev *);
+
+static struct pci_error_handlers igb_err_handler = {
+ .error_detected = igb_io_error_detected,
+ .slot_reset = igb_io_slot_reset,
+ .resume = igb_io_resume,
+};
+
+
+static struct pci_driver igb_driver = {
+ .name = igb_driver_name,
+ .id_table = igb_pci_tbl,
+ .probe = igb_probe,
+ .remove = __devexit_p(igb_remove),
+#ifdef CONFIG_PM
+ /* Power Managment Hooks */
+ .suspend = igb_suspend,
+ .resume = igb_resume,
+#endif
+ .shutdown = igb_shutdown,
+ .err_handler = &igb_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
+MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#ifdef DEBUG
+/**
+ * igb_get_hw_dev_name - return device name string
+ * used by hardware layer to print debugging information
+ **/
+char *igb_get_hw_dev_name(struct e1000_hw *hw)
+{
+ struct igb_adapter *adapter = hw->back;
+ return adapter->netdev->name;
+}
+#endif
+
+/**
+ * igb_init_module - Driver Registration Routine
+ *
+ * igb_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init igb_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ igb_driver_string, igb_driver_version);
+
+ printk(KERN_INFO "%s\n", igb_copyright);
+
+ ret = pci_register_driver(&igb_driver);
+ return ret;
+}
+
+module_init(igb_init_module);
+
+/**
+ * igb_exit_module - Driver Exit Cleanup Routine
+ *
+ * igb_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit igb_exit_module(void)
+{
+ pci_unregister_driver(&igb_driver);
+}
+
+module_exit(igb_exit_module);
+
+/**
+ * igb_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.
+ **/
+static int igb_alloc_queues(struct igb_adapter *adapter)
+{
+ int i;
+
+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct igb_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+
+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct igb_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = &(adapter->rx_ring[i]);
+ ring->adapter = adapter;
+ ring->itr_register = E1000_ITR;
+
+ if (!ring->napi.poll)
+ netif_napi_add(adapter->netdev, &ring->napi, igb_clean,
+ adapter->napi.weight /
+ adapter->num_rx_queues);
+ }
+ return 0;
+}
+
+#define IGB_N0_QUEUE -1
+static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue,
+ int tx_queue, int msix_vector)
+{
+ u32 msixbm = 0;
+ struct e1000_hw *hw = &adapter->hw;
+ /* The 82575 assigns vectors using a bitmask, which matches the
+ bitmask for the EICR/EIMS/EIMC registers. To assign one
+ or more queues to a vector, we write the appropriate bits
+ into the MSIXBM register for that vector. */
+ if (rx_queue > IGB_N0_QUEUE) {
+ msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
+ adapter->rx_ring[rx_queue].eims_value = msixbm;
+ }
+ if (tx_queue > IGB_N0_QUEUE) {
+ msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+ adapter->tx_ring[tx_queue].eims_value =
+ E1000_EICR_TX_QUEUE0 << tx_queue;
+ }
+ array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+}
+
+/**
+ * igb_configure_msix - Configure MSI-X hardware
+ *
+ * igb_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void igb_configure_msix(struct igb_adapter *adapter)
+{
+ u32 tmp;
+ int i, vector = 0;
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->eims_enable_mask = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *tx_ring = &adapter->tx_ring[i];
+ igb_assign_vector(adapter, IGB_N0_QUEUE, i, vector++);
+ adapter->eims_enable_mask |= tx_ring->eims_value;
+ if (tx_ring->itr_val)
+ writel(1000000000 / (tx_ring->itr_val * 256),
+ hw->hw_addr + tx_ring->itr_register);
+ else
+ writel(1, hw->hw_addr + tx_ring->itr_register);
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *rx_ring = &adapter->rx_ring[i];
+ igb_assign_vector(adapter, i, IGB_N0_QUEUE, vector++);
+ adapter->eims_enable_mask |= rx_ring->eims_value;
+ if (rx_ring->itr_val)
+ writel(1000000000 / (rx_ring->itr_val * 256),
+ hw->hw_addr + rx_ring->itr_register);
+ else
+ writel(1, hw->hw_addr + rx_ring->itr_register);
+ }
+
+
+ /* set vector for other causes, i.e. link changes */
+ array_wr32(E1000_MSIXBM(0), vector++,
+ E1000_EIMS_OTHER);
+
+ /* disable IAM for ICR interrupt bits */
+ wr32(E1000_IAM, 0);
+
+ tmp = rd32(E1000_CTRL_EXT);
+ /* enable MSI-X PBA support*/
+ tmp |= E1000_CTRL_EXT_PBA_CLR;
+
+ /* Auto-Mask interrupts upon ICR read. */
+ tmp |= E1000_CTRL_EXT_EIAME;
+ tmp |= E1000_CTRL_EXT_IRCA;
+
+ wr32(E1000_CTRL_EXT, tmp);
+ adapter->eims_enable_mask |= E1000_EIMS_OTHER;
+
+ wrfl();
+}
+
+/**
+ * igb_request_msix - Initialize MSI-X interrupts
+ *
+ * igb_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int igb_request_msix(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i, err = 0, vector = 0;
+
+ vector = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *ring = &(adapter->tx_ring[i]);
+ sprintf(ring->name, "%s-tx%d", netdev->name, i);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &igb_msix_tx, 0, ring->name,
+ &(adapter->tx_ring[i]));
+ if (err)
+ goto out;
+ ring->itr_register = E1000_EITR(0) + (vector << 2);
+ ring->itr_val = adapter->itr;
+ vector++;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = &(adapter->rx_ring[i]);
+ if (strlen(netdev->name) < (IFNAMSIZ - 5))
+ sprintf(ring->name, "%s-rx%d", netdev->name, i);
+ else
+ memcpy(ring->name, netdev->name, IFNAMSIZ);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &igb_msix_rx, 0, ring->name,
+ &(adapter->rx_ring[i]));
+ if (err)
+ goto out;
+ ring->itr_register = E1000_EITR(0) + (vector << 2);
+ ring->itr_val = adapter->itr;
+ vector++;
+ }
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &igb_msix_other, 0, netdev->name, netdev);
+ if (err)
+ goto out;
+
+ adapter->napi.poll = igb_clean_rx_ring_msix;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i].napi.poll = adapter->napi.poll;
+ igb_configure_msix(adapter);
+ return 0;
+out:
+ return err;
+}
+
+static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
+{
+ if (adapter->msix_entries) {
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else if (adapter->msi_enabled)
+ pci_disable_msi(adapter->pdev);
+ return;
+}
+
+
+/**
+ * igb_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static void igb_set_interrupt_capability(struct igb_adapter *adapter)
+{
+ int err;
+ int numvecs, i;
+
+ numvecs = adapter->num_tx_queues + adapter->num_rx_queues + 1;
+ adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (!adapter->msix_entries)
+ goto msi_only;
+
+ for (i = 0; i < numvecs; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(adapter->pdev,
+ adapter->msix_entries,
+ numvecs);
+ if (err == 0)
+ return;
+
+ igb_reset_interrupt_capability(adapter);
+
+ /* If we can't do MSI-X, try MSI */
+msi_only:
+ adapter->num_rx_queues = 1;
+ if (!pci_enable_msi(adapter->pdev))
+ adapter->msi_enabled = 1;
+ return;
+}
+
+/**
+ * igb_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igb_request_irq(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int err = 0;
+
+ if (adapter->msix_entries) {
+ err = igb_request_msix(adapter);
+ if (!err) {
+ struct e1000_hw *hw = &adapter->hw;
+ /* enable IAM, auto-mask,
+ * DO NOT USE EIAME or IAME in legacy mode */
+ wr32(E1000_IAM, IMS_ENABLE_MASK);
+ goto request_done;
+ }
+ /* fall back to MSI */
+ igb_reset_interrupt_capability(adapter);
+ if (!pci_enable_msi(adapter->pdev))
+ adapter->msi_enabled = 1;
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+ adapter->num_rx_queues = 1;
+ igb_alloc_queues(adapter);
+ }
+ if (adapter->msi_enabled) {
+ err = request_irq(adapter->pdev->irq, &igb_intr_msi, 0,
+ netdev->name, netdev);
+ if (!err)
+ goto request_done;
+ /* fall back to legacy interrupts */
+ igb_reset_interrupt_capability(adapter);
+ adapter->msi_enabled = 0;
+ }
+
+ err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED,
+ netdev->name, netdev);
+
+ if (err) {
+ dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
+ err);
+ goto request_done;
+ }
+
+ /* enable IAM, auto-mask */
+ wr32(E1000_IAM, IMS_ENABLE_MASK);
+
+request_done:
+ return err;
+}
+
+static void igb_free_irq(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ if (adapter->msix_entries) {
+ int vector = 0, i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ free_irq(adapter->msix_entries[vector++].vector,
+ &(adapter->tx_ring[i]));
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ free_irq(adapter->msix_entries[vector++].vector,
+ &(adapter->rx_ring[i]));
+
+ free_irq(adapter->msix_entries[vector++].vector, netdev);
+ return;
+ }
+
+ free_irq(adapter->pdev->irq, netdev);
+}
+
+/**
+ * igb_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static void igb_irq_disable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->msix_entries) {
+ wr32(E1000_EIMC, ~0);
+ wr32(E1000_EIAC, 0);
+ }
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * igb_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static void igb_irq_enable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->msix_entries) {
+ wr32(E1000_EIMS,
+ adapter->eims_enable_mask);
+ wr32(E1000_EIAC,
+ adapter->eims_enable_mask);
+ wr32(E1000_IMS, E1000_IMS_LSC);
+ } else
+ wr32(E1000_IMS, IMS_ENABLE_MASK);
+}
+
+static void igb_update_mng_vlan(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ u16 vid = adapter->hw.mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+ if (adapter->vlgrp) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid)) {
+ if (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ igb_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ } else
+ adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+
+ if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !vlan_group_get_device(adapter->vlgrp, old_vid))
+ igb_vlan_rx_kill_vid(netdev, old_vid);
+ } else
+ adapter->mng_vlan_id = vid;
+ }
+}
+
+/**
+ * igb_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded.
+ *
+ **/
+static void igb_release_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware take over control of h/w */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+}
+
+
+/**
+ * igb_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded.
+ *
+ **/
+static void igb_get_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware know the driver has taken over */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+}
+
+static void igb_init_manageability(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc2h = rd32(E1000_MANC2H);
+ u32 manc = rd32(E1000_MANC);
+
+ /* disable hardware interception of ARP */
+ manc &= ~(E1000_MANC_ARP_EN);
+
+ /* enable receiving management packets to the host */
+ /* this will probably generate destination unreachable messages
+ * from the host OS, but the packets will be handled on SMBUS */
+ manc |= E1000_MANC_EN_MNG2HOST;
+#define E1000_MNG2HOST_PORT_623 (1 << 5)
+#define E1000_MNG2HOST_PORT_664 (1 << 6)
+ manc2h |= E1000_MNG2HOST_PORT_623;
+ manc2h |= E1000_MNG2HOST_PORT_664;
+ wr32(E1000_MANC2H, manc2h);
+
+ wr32(E1000_MANC, manc);
+ }
+}
+
+static void igb_release_manageability(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = rd32(E1000_MANC);
+
+ /* re-enable hardware interception of ARP */
+ manc |= E1000_MANC_ARP_EN;
+ manc &= ~E1000_MANC_EN_MNG2HOST;
+
+ /* don't explicitly have to mess with MANC2H since
+ * MANC has an enable disable that gates MANC2H */
+
+ /* XXX stop the hardware watchdog ? */
+ wr32(E1000_MANC, manc);
+ }
+}
+
+/**
+ * igb_configure - configure the hardware for RX and TX
+ * @adapter: private board structure
+ **/
+static void igb_configure(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ igb_get_hw_control(adapter);
+ igb_set_multi(netdev);
+
+ igb_restore_vlan(adapter);
+ igb_init_manageability(adapter);
+
+ igb_configure_tx(adapter);
+ igb_setup_rctl(adapter);
+ igb_configure_rx(adapter);
+ /* call IGB_DESC_UNUSED which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = &adapter->rx_ring[i];
+ igb_alloc_rx_buffers_adv(adapter, ring, IGB_DESC_UNUSED(ring));
+ }
+
+
+ adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+
+/**
+ * igb_up - Open the interface and prepare it to handle traffic
+ * @adapter: board private structure
+ **/
+
+int igb_up(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* hardware has been reset, we need to reload some things */
+ igb_configure(adapter);
+
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ napi_enable(&adapter->napi);
+
+ if (adapter->msix_entries) {
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ napi_enable(&adapter->rx_ring[i].napi);
+ igb_configure_msix(adapter);
+ }
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+ igb_irq_enable(adapter);
+
+ /* Fire a link change interrupt to start the watchdog. */
+ wr32(E1000_ICS, E1000_ICS_LSC);
+ return 0;
+}
+
+void igb_down(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 tctl, rctl;
+ int i;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__IGB_DOWN, &adapter->state);
+
+ /* disable receives in the hardware */
+ rctl = rd32(E1000_RCTL);
+ wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ netif_stop_queue(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ wr32(E1000_TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ wrfl();
+ msleep(10);
+
+ napi_disable(&adapter->napi);
+
+ if (adapter->msix_entries)
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ napi_disable(&adapter->rx_ring[i].napi);
+ igb_irq_disable(adapter);
+
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ netif_carrier_off(netdev);
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ igb_reset(adapter);
+ igb_clean_all_tx_rings(adapter);
+ igb_clean_all_rx_rings(adapter);
+}
+
+void igb_reinit_locked(struct igb_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+ igb_down(adapter);
+ igb_up(adapter);
+ clear_bit(__IGB_RESETTING, &adapter->state);
+}
+
+void igb_reset(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_fc_info *fc = &adapter->hw.fc;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+ u16 hwm;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+ pba = E1000_PBA_34K;
+
+ if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ /* adjust PBA for jumbo frames */
+ wr32(E1000_PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB. */
+ pba = rd32(E1000_PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /* the tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it */
+ min_tx_space = (adapter->max_frame_size +
+ sizeof(struct e1000_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = adapter->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* if short on rx space, rx wins and must trump tx
+ * adjustment */
+ if (pba < min_rx_space)
+ pba = min_rx_space;
+ }
+ }
+ wr32(E1000_PBA, pba);
+
+ /* flow control settings */
+ /* The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, or
+ * - the full Rx FIFO size minus one full frame */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - adapter->max_frame_size));
+
+ fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ fc->low_water = fc->high_water - 8;
+ fc->pause_time = 0xFFFF;
+ fc->send_xon = 1;
+ fc->type = fc->original_type;
+
+ /* Allow time for pending master requests to run */
+ adapter->hw.mac.ops.reset_hw(&adapter->hw);
+ wr32(E1000_WUC, 0);
+
+ if (adapter->hw.mac.ops.init_hw(&adapter->hw))
+ dev_err(&adapter->pdev->dev, "Hardware Error\n");
+
+ igb_update_mng_vlan(adapter);
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ igb_reset_adaptive(&adapter->hw);
+ adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+ igb_release_manageability(adapter);
+}
+
+/**
+ * igb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igb_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igb_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit igb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct igb_adapter *adapter;
+ struct e1000_hw *hw;
+ const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
+ unsigned long mmio_start, mmio_len;
+ static int cards_found;
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = IGB_EEPROM_APME;
+ u32 part_num;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ if (!err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (!err)
+ pci_using_dac = 1;
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA "
+ "configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+ }
+
+ err = pci_request_regions(pdev, igb_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_set_master(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct igb_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ hw = &adapter->hw;
+ hw->back = adapter;
+ adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+
+ mmio_start = pci_resource_start(pdev, 0);
+ mmio_len = pci_resource_len(pdev, 0);
+
+ err = -EIO;
+ adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
+ if (!adapter->hw.hw_addr)
+ goto err_ioremap;
+
+ netdev->open = &igb_open;
+ netdev->stop = &igb_close;
+ netdev->get_stats = &igb_get_stats;
+ netdev->set_multicast_list = &igb_set_multi;
+ netdev->set_mac_address = &igb_set_mac;
+ netdev->change_mtu = &igb_change_mtu;
+ netdev->do_ioctl = &igb_ioctl;
+ igb_set_ethtool_ops(netdev);
+ netdev->tx_timeout = &igb_tx_timeout;
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, igb_clean, 64);
+ netdev->vlan_rx_register = igb_vlan_rx_register;
+ netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid;
+ netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = igb_netpoll;
+#endif
+ netdev->hard_start_xmit = &igb_xmit_frame_adv;
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ netdev->mem_start = mmio_start;
+ netdev->mem_end = mmio_start + mmio_len;
+
+ adapter->bd_number = cards_found;
+
+ /* PCI config space info */
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->revision_id = pdev->revision;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
+ /* setup the private structure */
+ hw->back = adapter;
+ /* Copy the default MAC, PHY and NVM function pointers */
+ memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
+ memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
+ memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
+ /* Initialize skew-specific constants */
+ err = ei->get_invariants(hw);
+ if (err)
+ goto err_hw_init;
+
+ err = igb_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ igb_get_bus_info_pcie(hw);
+
+ hw->phy.autoneg_wait_to_complete = false;
+ hw->mac.adaptive_ifs = true;
+
+ /* Copper options */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ hw->phy.mdix = AUTO_ALL_MODES;
+ hw->phy.disable_polarity_correction = false;
+ hw->phy.ms_type = e1000_ms_hw_default;
+ }
+
+ if (igb_check_reset_block(hw))
+ dev_info(&pdev->dev,
+ "PHY reset is blocked due to SOL/IDER session.\n");
+
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ netdev->features |= NETIF_F_TSO;
+
+ netdev->features |= NETIF_F_TSO6;
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->features |= NETIF_F_LLTX;
+ adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
+
+ /* before reading the NVM, reset the controller to put the device in a
+ * known good starting state */
+ hw->mac.ops.reset_hw(hw);
+
+ /* make sure the NVM is good */
+ if (igb_validate_nvm_checksum(hw) < 0) {
+ dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ /* copy the MAC address out of the NVM */
+ if (hw->mac.ops.read_mac_addr(hw))
+ dev_err(&pdev->dev, "NVM Read Error\n");
+
+ memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ dev_err(&pdev->dev, "Invalid MAC Address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = &igb_watchdog;
+ adapter->watchdog_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = &igb_update_phy_info;
+ adapter->phy_info_timer.data = (unsigned long) adapter;
+
+ INIT_WORK(&adapter->reset_task, igb_reset_task);
+ INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
+
+ /* Initialize link & ring properties that are user-changeable */
+ adapter->tx_ring->count = 256;
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i].count = adapter->tx_ring->count;
+ adapter->rx_ring->count = 256;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i].count = adapter->rx_ring->count;
+
+ adapter->fc_autoneg = true;
+ hw->mac.autoneg = true;
+ hw->phy.autoneg_advertised = 0x2f;
+
+ hw->fc.original_type = e1000_fc_default;
+ hw->fc.type = e1000_fc_default;
+
+ adapter->itr_setting = 3;
+ adapter->itr = IGB_START_ITR;
+
+ igb_validate_mdi_setting(hw);
+
+ adapter->rx_csum = 1;
+
+ /* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
+ * enable the ACPI Magic Packet filter
+ */
+
+ if (hw->bus.func == 0 ||
+ hw->device_id == E1000_DEV_ID_82575EB_COPPER)
+ hw->nvm.ops.read_nvm(hw, NVM_INIT_CONTROL3_PORT_A, 1,
+ &eeprom_data);
+
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+ /* now that we have the eeprom settings, apply the special cases where
+ * the eeprom may be wrong or the board simply won't support wake on
+ * lan on a particular port */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting */
+ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
+ adapter->eeprom_wol = 0;
+ break;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
+
+ /* reset the hardware with the new settings */
+ igb_reset(adapter);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver. */
+ igb_get_hw_control(adapter);
+
+ /* tell the stack to leave us alone until igb_open() is called */
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
+ /* print bus type/speed/width info */
+ dev_info(&pdev->dev,
+ "%s: (PCIe:%s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->name,
+ ((hw->bus.speed == e1000_bus_speed_2500)
+ ? "2.5Gb/s" : "unknown"),
+ ((hw->bus.width == e1000_bus_width_pcie_x4)
+ ? "Width x4" : (hw->bus.width == e1000_bus_width_pcie_x1)
+ ? "Width x1" : "unknown"),
+ netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
+ netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
+
+ igb_read_part_num(hw, &part_num);
+ dev_info(&pdev->dev, "%s: PBA No: %06x-%03x\n", netdev->name,
+ (part_num >> 8), (part_num & 0xff));
+
+ dev_info(&pdev->dev,
+ "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
+ adapter->msix_entries ? "MSI-X" :
+ adapter->msi_enabled ? "MSI" : "legacy",
+ adapter->num_rx_queues, adapter->num_tx_queues);
+
+ cards_found++;
+ return 0;
+
+err_register:
+ igb_release_hw_control(adapter);
+err_eeprom:
+ if (!igb_check_reset_block(hw))
+ hw->phy.ops.reset_phy(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+
+ igb_remove_device(hw);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
+err_hw_init:
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * igb_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igb_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit igb_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ /* flush_scheduled work may reschedule our watchdog task, so
+ * explicitly disable watchdog tasks from being rescheduled */
+ set_bit(__IGB_DOWN, &adapter->state);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ flush_scheduled_work();
+
+
+ igb_release_manageability(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ igb_release_hw_control(adapter);
+
+ unregister_netdev(netdev);
+
+ if (!igb_check_reset_block(&adapter->hw))
+ adapter->hw.phy.ops.reset_phy(&adapter->hw);
+
+ igb_remove_device(&adapter->hw);
+ igb_reset_interrupt_capability(adapter);
+
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(adapter->hw.hw_addr);
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+ pci_release_regions(pdev);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * igb_sw_init - Initialize general software structures (struct igb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit igb_sw_init(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ adapter->rx_ps_hdr_size = 0; /* disable packet split */
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ /* Number of supported queues. */
+ /* Having more queues than CPUs doesn't make sense. */
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = min(IGB_MAX_RX_QUEUES, num_online_cpus());
+
+ igb_set_interrupt_capability(adapter);
+
+ if (igb_alloc_queues(adapter)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igb_irq_disable(adapter);
+
+ set_bit(__IGB_DOWN, &adapter->state);
+ return 0;
+}
+
+/**
+ * igb_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int igb_open(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+ int i;
+
+ /* disallow open during test */
+ if (test_bit(__IGB_TESTING, &adapter->state))
+ return -EBUSY;
+
+ /* allocate transmit descriptors */
+ err = igb_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = igb_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ /* e1000_power_up_phy(adapter); */
+
+ adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
+ igb_update_mng_vlan(adapter);
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ igb_configure(adapter);
+
+ err = igb_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as igb_up() */
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ napi_enable(&adapter->napi);
+ if (adapter->msix_entries)
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ napi_enable(&adapter->rx_ring[i].napi);
+
+ igb_irq_enable(adapter);
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+ /* Fire a link status change interrupt to start the watchdog. */
+ wr32(E1000_ICS, E1000_ICS_LSC);
+
+ return 0;
+
+err_req_irq:
+ igb_release_hw_control(adapter);
+ /* e1000_power_down_phy(adapter); */
+ igb_free_all_rx_resources(adapter);
+err_setup_rx:
+ igb_free_all_tx_resources(adapter);
+err_setup_tx:
+ igb_reset(adapter);
+
+ return err;
+}
+
+/**
+ * igb_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the driver's control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int igb_close(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
+ igb_down(adapter);
+
+ igb_free_irq(adapter);
+
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+
+ /* kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it) */
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
+ !(adapter->vlgrp &&
+ vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
+ igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+
+ return 0;
+}
+
+/**
+ * igb_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @tx_ring: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int igb_setup_tx_resources(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct igb_buffer) * tx_ring->count;
+ tx_ring->buffer_info = vmalloc(size);
+ if (!tx_ring->buffer_info)
+ goto err;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc)
+ + sizeof(u32);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
+ &tx_ring->dma);
+
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->adapter = adapter;
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ spin_lock_init(&tx_ring->tx_clean_lock);
+ spin_lock_init(&tx_ring->tx_lock);
+ return 0;
+
+err:
+ vfree(tx_ring->buffer_info);
+ dev_err(&adapter->pdev->dev,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = igb_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ dev_err(&adapter->pdev->dev,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_tx_resources(adapter,
+ &adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_configure_tx - Configure transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igb_configure_tx(struct igb_adapter *adapter)
+{
+ u64 tdba, tdwba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl;
+ u32 txdctl, txctrl;
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *ring = &(adapter->tx_ring[i]);
+
+ wr32(E1000_TDLEN(i),
+ ring->count * sizeof(struct e1000_tx_desc));
+ tdba = ring->dma;
+ wr32(E1000_TDBAL(i),
+ tdba & 0x00000000ffffffffULL);
+ wr32(E1000_TDBAH(i), tdba >> 32);
+
+ tdwba = ring->dma + ring->count * sizeof(struct e1000_tx_desc);
+ tdwba |= 1; /* enable head wb */
+ wr32(E1000_TDWBAL(i),
+ tdwba & 0x00000000ffffffffULL);
+ wr32(E1000_TDWBAH(i), tdwba >> 32);
+
+ ring->head = E1000_TDH(i);
+ ring->tail = E1000_TDT(i);
+ writel(0, hw->hw_addr + ring->tail);
+ writel(0, hw->hw_addr + ring->head);
+ txdctl = rd32(E1000_TXDCTL(i));
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ wr32(E1000_TXDCTL(i), txdctl);
+
+ /* Turn off Relaxed Ordering on head write-backs. The
+ * writebacks MUST be delivered in order or it will
+ * completely screw up our bookeeping.
+ */
+ txctrl = rd32(E1000_DCA_TXCTRL(i));
+ txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
+ wr32(E1000_DCA_TXCTRL(i), txctrl);
+ }
+
+
+
+ /* Use the default values for the Tx Inter Packet Gap (IPG) timer */
+
+ /* Program the Transmit Control Register */
+
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ igb_config_collision_dist(hw);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS;
+
+ /* Enable transmits */
+ tctl |= E1000_TCTL_EN;
+
+ wr32(E1000_TCTL, tctl);
+}
+
+/**
+ * igb_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rx_ring: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+int igb_setup_rx_resources(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct igb_buffer) * rx_ring->count;
+ rx_ring->buffer_info = vmalloc(size);
+ if (!rx_ring->buffer_info)
+ goto err;
+ memset(rx_ring->buffer_info, 0, size);
+
+ desc_len = sizeof(union e1000_adv_rx_desc);
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * desc_len;
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
+ &rx_ring->dma);
+
+ if (!rx_ring->desc)
+ goto err;
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+ rx_ring->pending_skb = NULL;
+
+ rx_ring->adapter = adapter;
+ /* FIXME: do we want to setup ring->napi->poll here? */
+ rx_ring->napi.poll = adapter->napi.poll;
+
+ return 0;
+
+err:
+ vfree(rx_ring->buffer_info);
+ dev_err(&adapter->pdev->dev, "Unable to allocate memory for "
+ "the receive descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = igb_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ dev_err(&adapter->pdev->dev,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_rx_resources(adapter,
+ &adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void igb_setup_rctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u32 srrctl = 0;
+ int i;
+
+ rctl = rd32(E1000_RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ /* disable the stripping of CRC because it breaks
+ * BMC firmware connected over SMBUS
+ rctl |= E1000_RCTL_SECRC;
+ */
+
+ rctl &= ~E1000_RCTL_SBP;
+
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+ if (adapter->rx_buffer_len <= IGB_RXBUFFER_2048) {
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case IGB_RXBUFFER_256:
+ rctl |= E1000_RCTL_SZ_256;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case IGB_RXBUFFER_512:
+ rctl |= E1000_RCTL_SZ_512;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case IGB_RXBUFFER_1024:
+ rctl |= E1000_RCTL_SZ_1024;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case IGB_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case IGB_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case IGB_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case IGB_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+ } else {
+ rctl &= ~E1000_RCTL_BSEX;
+ srrctl = adapter->rx_buffer_len >> E1000_SRRCTL_BSIZEPKT_SHIFT;
+ }
+
+ /* 82575 and greater support packet-split where the protocol
+ * header is placed in skb->data and the packet data is
+ * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
+ * In the case of a non-split, skb->data is linearly filled,
+ * followed by the page buffers. Therefore, skb->data is
+ * sized to hold the largest protocol header.
+ */
+ /* allocations using alloc_page take too long for regular MTU
+ * so only enable packet split for jumbo frames */
+ if (rctl & E1000_RCTL_LPE) {
+ adapter->rx_ps_hdr_size = IGB_RXBUFFER_128;
+ srrctl = adapter->rx_ps_hdr_size <<
+ E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ /* buffer size is ALWAYS one page */
+ srrctl |= PAGE_SIZE >> E1000_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+ } else {
+ adapter->rx_ps_hdr_size = 0;
+ srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ wr32(E1000_SRRCTL(i), srrctl);
+
+ wr32(E1000_RCTL, rctl);
+}
+
+/**
+ * igb_configure_rx - Configure receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igb_configure_rx(struct igb_adapter *adapter)
+{
+ u64 rdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl, rxcsum;
+ u32 rxdctl;
+ int i;
+
+ /* disable receives while setting up the descriptors */
+ rctl = rd32(E1000_RCTL);
+ wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
+ wrfl();
+ mdelay(10);
+
+ if (adapter->itr_setting > 3)
+ wr32(E1000_ITR,
+ 1000000000 / (adapter->itr * 256));
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = &(adapter->rx_ring[i]);
+ rdba = ring->dma;
+ wr32(E1000_RDBAL(i),
+ rdba & 0x00000000ffffffffULL);
+ wr32(E1000_RDBAH(i), rdba >> 32);
+ wr32(E1000_RDLEN(i),
+ ring->count * sizeof(union e1000_adv_rx_desc));
+
+ ring->head = E1000_RDH(i);
+ ring->tail = E1000_RDT(i);
+ writel(0, hw->hw_addr + ring->tail);
+ writel(0, hw->hw_addr + ring->head);
+
+ rxdctl = rd32(E1000_RXDCTL(i));
+ rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+ rxdctl &= 0xFFF00000;
+ rxdctl |= IGB_RX_PTHRESH;
+ rxdctl |= IGB_RX_HTHRESH << 8;
+ rxdctl |= IGB_RX_WTHRESH << 16;
+ wr32(E1000_RXDCTL(i), rxdctl);
+ }
+
+ if (adapter->num_rx_queues > 1) {
+ u32 random[10];
+ u32 mrqc;
+ u32 j, shift;
+ union e1000_reta {
+ u32 dword;
+ u8 bytes[4];
+ } reta;
+
+ get_random_bytes(&random[0], 40);
+
+ shift = 6;
+ for (j = 0; j < (32 * 4); j++) {
+ reta.bytes[j & 3] =
+ (j % adapter->num_rx_queues) << shift;
+ if ((j & 3) == 3)
+ writel(reta.dword,
+ hw->hw_addr + E1000_RETA(0) + (j & ~3));
+ }
+ mrqc = E1000_MRQC_ENABLE_RSS_4Q;
+
+ /* Fill out hash function seeds */
+ for (j = 0; j < 10; j++)
+ array_wr32(E1000_RSSRK(0), j, random[j]);
+
+ mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP);
+ mrqc |= (E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP);
+ mrqc |= (E1000_MRQC_RSS_FIELD_IPV4_UDP |
+ E1000_MRQC_RSS_FIELD_IPV6_UDP);
+ mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
+
+
+ wr32(E1000_MRQC, mrqc);
+
+ /* Multiqueue and raw packet checksumming are mutually
+ * exclusive. Note that this not the same as TCP/IP
+ * checksumming, which works fine. */
+ rxcsum = rd32(E1000_RXCSUM);
+ rxcsum |= E1000_RXCSUM_PCSD;
+ wr32(E1000_RXCSUM, rxcsum);
+ } else {
+ /* Enable Receive Checksum Offload for TCP and UDP */
+ rxcsum = rd32(E1000_RXCSUM);
+ if (adapter->rx_csum) {
+ rxcsum |= E1000_RXCSUM_TUOFL;
+
+ /* Enable IPv4 payload checksum for UDP fragments
+ * Must be used in conjunction with packet-split. */
+ if (adapter->rx_ps_hdr_size)
+ rxcsum |= E1000_RXCSUM_IPPCSE;
+ } else {
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ }
+ wr32(E1000_RXCSUM, rxcsum);
+ }
+
+ if (adapter->vlgrp)
+ wr32(E1000_RLPML,
+ adapter->max_frame_size + VLAN_TAG_SIZE);
+ else
+ wr32(E1000_RLPML, adapter->max_frame_size);
+
+ /* Enable Receives */
+ wr32(E1000_RCTL, rctl);
+}
+
+/**
+ * igb_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+static void igb_free_tx_resources(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ igb_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void igb_free_all_tx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_free_tx_resources(adapter, &adapter->tx_ring[i]);
+}
+
+static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter,
+ struct igb_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ pci_unmap_page(adapter->pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
+ buffer_info->dma = 0;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * igb_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+static void igb_clean_tx_ring(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring)
+{
+ struct igb_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ if (!tx_ring->buffer_info)
+ return;
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ igb_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct igb_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ writel(0, adapter->hw.hw_addr + tx_ring->head);
+ writel(0, adapter->hw.hw_addr + tx_ring->tail);
+}
+
+/**
+ * igb_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+/**
+ * igb_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+static void igb_free_rx_resources(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ igb_clean_rx_ring(adapter, rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void igb_free_all_rx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_free_rx_resources(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * igb_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+static void igb_clean_rx_ring(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring)
+{
+ struct igb_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ if (!rx_ring->buffer_info)
+ return;
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ if (adapter->rx_ps_hdr_size)
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_ps_hdr_size,
+ PCI_DMA_FROMDEVICE);
+ else
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ if (buffer_info->page) {
+ pci_unmap_page(pdev, buffer_info->page_dma,
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ buffer_info->page_dma = 0;
+ }
+ }
+
+ /* there also may be some cached data from a chained receive */
+ if (rx_ring->pending_skb) {
+ dev_kfree_skb(rx_ring->pending_skb);
+ rx_ring->pending_skb = NULL;
+ }
+
+ size = sizeof(struct igb_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, adapter->hw.hw_addr + rx_ring->head);
+ writel(0, adapter->hw.hw_addr + rx_ring->tail);
+}
+
+/**
+ * igb_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * igb_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_set_mac(struct net_device *netdev, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
+
+ adapter->hw.mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
+
+ return 0;
+}
+
+/**
+ * igb_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igb_set_multi(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct dev_mc_list *mc_ptr;
+ u8 *mta_list;
+ u32 rctl;
+ int i;
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = rd32(E1000_RCTL);
+
+ if (netdev->flags & IFF_PROMISC)
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ else if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ rctl &= ~E1000_RCTL_UPE;
+ } else
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+
+ wr32(E1000_RCTL, rctl);
+
+ if (!netdev->mc_count) {
+ /* nothing to program, so clear mc list */
+ igb_update_mc_addr_list(hw, NULL, 0, 1,
+ mac->rar_entry_count);
+ return;
+ }
+
+ mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
+ if (!mta_list)
+ return;
+
+ /* The shared function expects a packed array of only addresses. */
+ mc_ptr = netdev->mc_list;
+
+ for (i = 0; i < netdev->mc_count; i++) {
+ if (!mc_ptr)
+ break;
+ memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
+ mc_ptr = mc_ptr->next;
+ }
+ igb_update_mc_addr_list(hw, mta_list, i, 1, mac->rar_entry_count);
+ kfree(mta_list);
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+static void igb_update_phy_info(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *) data;
+ adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+}
+
+/**
+ * igb_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void igb_watchdog(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ /* Do the rest outside of interrupt context */
+ schedule_work(&adapter->watchdog_task);
+}
+
+static void igb_watchdog_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter = container_of(work,
+ struct igb_adapter, watchdog_task);
+ struct e1000_hw *hw = &adapter->hw;
+
+ struct net_device *netdev = adapter->netdev;
+ struct igb_ring *tx_ring = adapter->tx_ring;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ u32 link;
+ s32 ret_val;
+
+ if ((netif_carrier_ok(netdev)) &&
+ (rd32(E1000_STATUS) & E1000_STATUS_LU))
+ goto link_up;
+
+ ret_val = hw->mac.ops.check_for_link(&adapter->hw);
+ if ((ret_val == E1000_ERR_PHY) &&
+ (hw->phy.type == e1000_phy_igp_3) &&
+ (rd32(E1000_CTRL) &
+ E1000_PHY_CTRL_GBE_DISABLE))
+ dev_info(&adapter->pdev->dev,
+ "Gigabit has been disabled, downgrading speed\n");
+
+ if ((hw->phy.media_type == e1000_media_type_internal_serdes) &&
+ !(rd32(E1000_TXCW) & E1000_TXCW_ANE))
+ link = mac->serdes_has_link;
+ else
+ link = rd32(E1000_STATUS) &
+ E1000_STATUS_LU;
+
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ u32 ctrl;
+ hw->mac.ops.get_speed_and_duplex(&adapter->hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = rd32(E1000_CTRL);
+ dev_info(&adapter->pdev->dev,
+ "NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
+ E1000_CTRL_TFCE) ? "TX" : "None")));
+
+ /* tweak tx_queue_len according to speed/duplex and
+ * adjust the timeout factor */
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ netdev->tx_queue_len = 10;
+ adapter->tx_timeout_factor = 14;
+ break;
+ case SPEED_100:
+ netdev->tx_queue_len = 100;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
+
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ dev_info(&adapter->pdev->dev, "NIC Link is Down\n");
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ }
+
+link_up:
+ igb_update_stats(adapter);
+
+ mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ mac->collision_delta = adapter->stats.colc - adapter->colc_old;
+ adapter->colc_old = adapter->stats.colc;
+
+ adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
+ adapter->gorc_old = adapter->stats.gorc;
+ adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
+ adapter->gotc_old = adapter->stats.gotc;
+
+ igb_update_adaptive(&adapter->hw);
+
+ if (!netif_carrier_ok(netdev)) {
+ if (IGB_DESC_UNUSED(tx_ring) + 1 < tx_ring->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ }
+ }
+
+ /* Cause software interrupt to ensure rx ring is cleaned */
+ wr32(E1000_ICS, E1000_ICS_RXDMT0);
+
+ /* Force detection of hung controller every watchdog period */
+ tx_ring->detect_tx_hung = true;
+
+ /* Reset the timer */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+
+static void igb_lower_rx_eitr(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int new_val;
+
+ new_val = rx_ring->itr_val / 2;
+ if (new_val < IGB_MIN_DYN_ITR)
+ new_val = IGB_MIN_DYN_ITR;
+
+ if (new_val != rx_ring->itr_val) {
+ rx_ring->itr_val = new_val;
+ wr32(rx_ring->itr_register,
+ 1000000000 / (new_val * 256));
+ }
+}
+
+static void igb_raise_rx_eitr(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int new_val;
+
+ new_val = rx_ring->itr_val * 2;
+ if (new_val > IGB_MAX_DYN_ITR)
+ new_val = IGB_MAX_DYN_ITR;
+
+ if (new_val != rx_ring->itr_val) {
+ rx_ring->itr_val = new_val;
+ wr32(rx_ring->itr_register,
+ 1000000000 / (new_val * 256));
+ }
+}
+
+/**
+ * igb_update_itr - update the dynamic ITR value based on statistics
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see igb_param.c)
+ * NOTE: These calculations are only valid when operating in a single-
+ * queue environment.
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ **/
+static unsigned int igb_update_itr(struct igb_adapter *adapter, u16 itr_setting,
+ int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes/packets > 8000) {
+ retval = bulk_latency;
+ } else if ((packets < 10) || ((bytes/packets) > 1200)) {
+ retval = bulk_latency;
+ } else if ((packets > 35)) {
+ retval = lowest_latency;
+ }
+ } else if (bytes/packets > 2000) {
+ retval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ retval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void igb_set_itr(struct igb_adapter *adapter, u16 itr_register,
+ int rx_only)
+{
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (adapter->link_speed != SPEED_1000) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ adapter->rx_itr = igb_update_itr(adapter,
+ adapter->rx_itr,
+ adapter->rx_ring->total_packets,
+ adapter->rx_ring->total_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ if (!rx_only) {
+ adapter->tx_itr = igb_update_itr(adapter,
+ adapter->tx_itr,
+ adapter->tx_ring->total_packets,
+ adapter->tx_ring->total_bytes);
+ /* conservative mode (itr 3) eliminates the
+ * lowest_latency setting */
+ if (adapter->itr_setting == 3 &&
+ adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+ } else {
+ current_itr = adapter->rx_itr;
+ }
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != adapter->itr) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ /* Don't write the value here; it resets the adapter's
+ * internal timer, and causes us to delay far longer than
+ * we should between interrupts. Instead, we write the ITR
+ * value at the beginning of the next interrupt so the timing
+ * ends up being correct.
+ */
+ adapter->itr = new_itr;
+ adapter->set_itr = 1;
+ }
+
+ return;
+}
+
+
+#define IGB_TX_FLAGS_CSUM 0x00000001
+#define IGB_TX_FLAGS_VLAN 0x00000002
+#define IGB_TX_FLAGS_TSO 0x00000004
+#define IGB_TX_FLAGS_IPV4 0x00000008
+#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IGB_TX_FLAGS_VLAN_SHIFT 16
+
+static inline int igb_tso_adv(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ int err;
+ struct igb_buffer *buffer_info;
+ u32 info = 0, tu_cmd = 0;
+ u32 mss_l4len_idx, l4len;
+ *hdr_len = 0;
+
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ l4len = tcp_hdrlen(skb);
+ *hdr_len += l4len;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ }
+
+ i = tx_ring->next_to_use;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i);
+ /* VLAN MACLEN IPLEN */
+ if (tx_flags & IGB_TX_FLAGS_VLAN)
+ info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
+ info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
+ *hdr_len += skb_network_offset(skb);
+ info |= skb_network_header_len(skb);
+ *hdr_len += skb_network_header_len(skb);
+ context_desc->vlan_macip_lens = cpu_to_le32(info);
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
+
+ /* MSS L4LEN IDX */
+ mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
+ mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
+
+ /* Context index must be unique per ring. Luckily, so is the interrupt
+ * mask value. */
+ mss_l4len_idx |= tx_ring->eims_value >> 4;
+
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+ context_desc->seqnum_seed = 0;
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->dma = 0;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+static inline bool igb_tx_csum_adv(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ struct igb_buffer *buffer_info;
+ u32 info = 0, tu_cmd = 0;
+
+ if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
+ (tx_flags & IGB_TX_FLAGS_VLAN)) {
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i);
+
+ if (tx_flags & IGB_TX_FLAGS_VLAN)
+ info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
+ info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ info |= skb_network_header_len(skb);
+
+ context_desc->vlan_macip_lens = cpu_to_le32(info);
+
+ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ if (skb->protocol == htons(ETH_P_IP))
+ tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
+ if (skb->sk && (skb->sk->sk_protocol == IPPROTO_TCP))
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ }
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
+ context_desc->seqnum_seed = 0;
+ context_desc->mss_l4len_idx =
+ cpu_to_le32(tx_ring->eims_value >> 4);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->dma = 0;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+
+
+ return false;
+}
+
+#define IGB_MAX_TXD_PWR 16
+#define IGB_MAX_DATA_PER_TXD (1<<IGB_MAX_TXD_PWR)
+
+static inline int igb_tx_map_adv(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring,
+ struct sk_buff *skb)
+{
+ struct igb_buffer *buffer_info;
+ unsigned int len = skb_headlen(skb);
+ unsigned int count = 0, i;
+ unsigned int f;
+
+ i = tx_ring->next_to_use;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ BUG_ON(len >= IGB_MAX_DATA_PER_TXD);
+ buffer_info->length = len;
+ /* set time_stamp *before* dma to help avoid a possible race */
+ buffer_info->time_stamp = jiffies;
+ buffer_info->dma = pci_map_single(adapter->pdev, skb->data, len,
+ PCI_DMA_TODEVICE);
+ count++;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ BUG_ON(len >= IGB_MAX_DATA_PER_TXD);
+ buffer_info->length = len;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->dma = pci_map_page(adapter->pdev,
+ frag->page,
+ frag->page_offset,
+ len,
+ PCI_DMA_TODEVICE);
+
+ count++;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ i = (i == 0) ? tx_ring->count - 1 : i - 1;
+ tx_ring->buffer_info[i].skb = skb;
+
+ return count;
+}
+
+static inline void igb_tx_queue_adv(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring,
+ int tx_flags, int count, u32 paylen,
+ u8 hdr_len)
+{
+ union e1000_adv_tx_desc *tx_desc = NULL;
+ struct igb_buffer *buffer_info;
+ u32 olinfo_status = 0, cmd_type_len;
+ unsigned int i;
+
+ cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
+ E1000_ADVTXD_DCMD_DEXT);
+
+ if (tx_flags & IGB_TX_FLAGS_VLAN)
+ cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
+
+ if (tx_flags & IGB_TX_FLAGS_TSO) {
+ cmd_type_len |= E1000_ADVTXD_DCMD_TSE;
+
+ /* insert tcp checksum */
+ olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+
+ /* insert ip checksum */
+ if (tx_flags & IGB_TX_FLAGS_IPV4)
+ olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
+
+ } else if (tx_flags & IGB_TX_FLAGS_CSUM) {
+ olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if (tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_TSO |
+ IGB_TX_FLAGS_VLAN))
+ olinfo_status |= tx_ring->eims_value >> 4;
+
+ olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
+
+ i = tx_ring->next_to_use;
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
+ tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type_len | buffer_info->length);
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd);
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, adapter->hw.hw_addr + tx_ring->tail);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+static int __igb_maybe_stop_tx(struct net_device *netdev,
+ struct igb_ring *tx_ring, int size)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (IGB_DESC_UNUSED(tx_ring) < size)
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int igb_maybe_stop_tx(struct net_device *netdev,
+ struct igb_ring *tx_ring, int size)
+{
+ if (IGB_DESC_UNUSED(tx_ring) >= size)
+ return 0;
+ return __igb_maybe_stop_tx(netdev, tx_ring, size);
+}
+
+#define TXD_USE_COUNT(S) (((S) >> (IGB_MAX_TXD_PWR)) + 1)
+
+static int igb_xmit_frame_ring_adv(struct sk_buff *skb,
+ struct net_device *netdev,
+ struct igb_ring *tx_ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ unsigned int tx_flags = 0;
+ unsigned int len;
+ unsigned long irq_flags;
+ u8 hdr_len = 0;
+ int tso = 0;
+
+ len = skb_headlen(skb);
+
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (!spin_trylock_irqsave(&tx_ring->tx_lock, irq_flags))
+ /* Collision - tell upper layer to requeue */
+ return NETDEV_TX_LOCKED;
+
+ /* need: 1 descriptor per page,
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for skb->data,
+ * + 1 desc for context descriptor,
+ * otherwise try next time */
+ if (igb_maybe_stop_tx(netdev, tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
+ /* this is a hard error */
+ spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
+ tx_flags |= IGB_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ tso = skb_is_gso(skb) ? igb_tso_adv(adapter, tx_ring, skb, tx_flags,
+ &hdr_len) : 0;
+
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags);
+ return NETDEV_TX_OK;
+ }
+
+ if (tso)
+ tx_flags |= IGB_TX_FLAGS_TSO;
+ else if (igb_tx_csum_adv(adapter, tx_ring, skb, tx_flags))
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ tx_flags |= IGB_TX_FLAGS_CSUM;
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tx_flags |= IGB_TX_FLAGS_IPV4;
+
+ igb_tx_queue_adv(adapter, tx_ring, tx_flags,
+ igb_tx_map_adv(adapter, tx_ring, skb),
+ skb->len, hdr_len);
+
+ netdev->trans_start = jiffies;
+
+ /* Make sure there is space in the ring for the next send. */
+ igb_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 4);
+
+ spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags);
+ return NETDEV_TX_OK;
+}
+
+static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct igb_ring *tx_ring = &adapter->tx_ring[0];
+
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
+ return (igb_xmit_frame_ring_adv(skb, netdev, tx_ring));
+}
+
+/**
+ * igb_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void igb_tx_timeout(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ wr32(E1000_EICS, adapter->eims_enable_mask &
+ ~(E1000_EIMS_TCP_TIMER | E1000_EIMS_OTHER));
+}
+
+static void igb_reset_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter;
+ adapter = container_of(work, struct igb_adapter, reset_task);
+
+ igb_reinit_locked(adapter);
+}
+
+/**
+ * igb_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+static struct net_device_stats *
+igb_get_stats(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ /* only return the current stats */
+ return &adapter->net_stats;
+}
+
+/**
+ * igb_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
+ if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&adapter->pdev->dev, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+ /* igb_down has a dependency on max_frame_size */
+ adapter->max_frame_size = max_frame;
+ if (netif_running(netdev))
+ igb_down(adapter);
+
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ */
+
+ if (max_frame <= IGB_RXBUFFER_256)
+ adapter->rx_buffer_len = IGB_RXBUFFER_256;
+ else if (max_frame <= IGB_RXBUFFER_512)
+ adapter->rx_buffer_len = IGB_RXBUFFER_512;
+ else if (max_frame <= IGB_RXBUFFER_1024)
+ adapter->rx_buffer_len = IGB_RXBUFFER_1024;
+ else if (max_frame <= IGB_RXBUFFER_2048)
+ adapter->rx_buffer_len = IGB_RXBUFFER_2048;
+ else
+ adapter->rx_buffer_len = IGB_RXBUFFER_4096;
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
+ (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+
+ dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ igb_up(adapter);
+ else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+
+ return 0;
+}
+
+/**
+ * igb_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void igb_update_stats(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ u16 phy_tmp;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ adapter->stats.crcerrs += rd32(E1000_CRCERRS);
+ adapter->stats.gprc += rd32(E1000_GPRC);
+ adapter->stats.gorc += rd32(E1000_GORCL);
+ rd32(E1000_GORCH); /* clear GORCL */
+ adapter->stats.bprc += rd32(E1000_BPRC);
+ adapter->stats.mprc += rd32(E1000_MPRC);
+ adapter->stats.roc += rd32(E1000_ROC);
+
+ adapter->stats.prc64 += rd32(E1000_PRC64);
+ adapter->stats.prc127 += rd32(E1000_PRC127);
+ adapter->stats.prc255 += rd32(E1000_PRC255);
+ adapter->stats.prc511 += rd32(E1000_PRC511);
+ adapter->stats.prc1023 += rd32(E1000_PRC1023);
+ adapter->stats.prc1522 += rd32(E1000_PRC1522);
+ adapter->stats.symerrs += rd32(E1000_SYMERRS);
+ adapter->stats.sec += rd32(E1000_SEC);
+
+ adapter->stats.mpc += rd32(E1000_MPC);
+ adapter->stats.scc += rd32(E1000_SCC);
+ adapter->stats.ecol += rd32(E1000_ECOL);
+ adapter->stats.mcc += rd32(E1000_MCC);
+ adapter->stats.latecol += rd32(E1000_LATECOL);
+ adapter->stats.dc += rd32(E1000_DC);
+ adapter->stats.rlec += rd32(E1000_RLEC);
+ adapter->stats.xonrxc += rd32(E1000_XONRXC);
+ adapter->stats.xontxc += rd32(E1000_XONTXC);
+ adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
+ adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
+ adapter->stats.fcruc += rd32(E1000_FCRUC);
+ adapter->stats.gptc += rd32(E1000_GPTC);
+ adapter->stats.gotc += rd32(E1000_GOTCL);
+ rd32(E1000_GOTCH); /* clear GOTCL */
+ adapter->stats.rnbc += rd32(E1000_RNBC);
+ adapter->stats.ruc += rd32(E1000_RUC);
+ adapter->stats.rfc += rd32(E1000_RFC);
+ adapter->stats.rjc += rd32(E1000_RJC);
+ adapter->stats.tor += rd32(E1000_TORH);
+ adapter->stats.tot += rd32(E1000_TOTH);
+ adapter->stats.tpr += rd32(E1000_TPR);
+
+ adapter->stats.ptc64 += rd32(E1000_PTC64);
+ adapter->stats.ptc127 += rd32(E1000_PTC127);
+ adapter->stats.ptc255 += rd32(E1000_PTC255);
+ adapter->stats.ptc511 += rd32(E1000_PTC511);
+ adapter->stats.ptc1023 += rd32(E1000_PTC1023);
+ adapter->stats.ptc1522 += rd32(E1000_PTC1522);
+
+ adapter->stats.mptc += rd32(E1000_MPTC);
+ adapter->stats.bptc += rd32(E1000_BPTC);
+
+ /* used for adaptive IFS */
+
+ hw->mac.tx_packet_delta = rd32(E1000_TPT);
+ adapter->stats.tpt += hw->mac.tx_packet_delta;
+ hw->mac.collision_delta = rd32(E1000_COLC);
+ adapter->stats.colc += hw->mac.collision_delta;
+
+ adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
+ adapter->stats.rxerrc += rd32(E1000_RXERRC);
+ adapter->stats.tncrs += rd32(E1000_TNCRS);
+ adapter->stats.tsctc += rd32(E1000_TSCTC);
+ adapter->stats.tsctfc += rd32(E1000_TSCTFC);
+
+ adapter->stats.iac += rd32(E1000_IAC);
+ adapter->stats.icrxoc += rd32(E1000_ICRXOC);
+ adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
+ adapter->stats.icrxatc += rd32(E1000_ICRXATC);
+ adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
+ adapter->stats.ictxatc += rd32(E1000_ICTXATC);
+ adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
+ adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
+ adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
+
+ /* Fill out the OS statistics structure */
+ adapter->net_stats.multicast = adapter->stats.mprc;
+ adapter->net_stats.collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
+ adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ adapter->net_stats.rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
+ adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
+ adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ adapter->net_stats.tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
+ adapter->net_stats.tx_window_errors = adapter->stats.latecol;
+ adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Phy Stats */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
+ (!hw->phy.ops.read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_tmp))) {
+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+ adapter->phy_stats.idle_errors += phy_tmp;
+ }
+ }
+
+ /* Management Stats */
+ adapter->stats.mgptc += rd32(E1000_MGTPTC);
+ adapter->stats.mgprc += rd32(E1000_MGTPRC);
+ adapter->stats.mgpdc += rd32(E1000_MGTPDC);
+}
+
+
+static irqreturn_t igb_msix_other(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 eicr;
+ /* disable interrupts from the "other" bit, avoid re-entry */
+ wr32(E1000_EIMC, E1000_EIMS_OTHER);
+
+ eicr = rd32(E1000_EICR);
+
+ if (eicr & E1000_EIMS_OTHER) {
+ u32 icr = rd32(E1000_ICR);
+ /* reading ICR causes bit 31 of EICR to be cleared */
+ if (!(icr & E1000_ICR_LSC))
+ goto no_link_interrupt;
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+no_link_interrupt:
+ wr32(E1000_IMS, E1000_IMS_LSC);
+ wr32(E1000_EIMS, E1000_EIMS_OTHER);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t igb_msix_tx(int irq, void *data)
+{
+ struct igb_ring *tx_ring = data;
+ struct igb_adapter *adapter = tx_ring->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!tx_ring->itr_val)
+ wr32(E1000_EIMC, tx_ring->eims_value);
+
+ tx_ring->total_bytes = 0;
+ tx_ring->total_packets = 0;
+ if (!igb_clean_tx_irq(adapter, tx_ring))
+ /* Ring was not completely cleaned, so fire another interrupt */
+ wr32(E1000_EICS, tx_ring->eims_value);
+
+ if (!tx_ring->itr_val)
+ wr32(E1000_EIMS, tx_ring->eims_value);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t igb_msix_rx(int irq, void *data)
+{
+ struct igb_ring *rx_ring = data;
+ struct igb_adapter *adapter = rx_ring->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!rx_ring->itr_val)
+ wr32(E1000_EIMC, rx_ring->eims_value);
+
+ if (netif_rx_schedule_prep(adapter->netdev, &rx_ring->napi)) {
+ rx_ring->total_bytes = 0;
+ rx_ring->total_packets = 0;
+ rx_ring->no_itr_adjust = 0;
+ __netif_rx_schedule(adapter->netdev, &rx_ring->napi);
+ } else {
+ if (!rx_ring->no_itr_adjust) {
+ igb_lower_rx_eitr(adapter, rx_ring);
+ rx_ring->no_itr_adjust = 1;
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+/**
+ * igb_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr_msi(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct napi_struct *napi = &adapter->napi;
+ struct e1000_hw *hw = &adapter->hw;
+ /* read ICR disables interrupts using IAM */
+ u32 icr = rd32(E1000_ICR);
+
+ /* Write the ITR value calculated at the end of the
+ * previous interrupt.
+ */
+ if (adapter->set_itr) {
+ wr32(E1000_ITR,
+ 1000000000 / (adapter->itr * 256));
+ adapter->set_itr = 0;
+ }
+
+ /* read ICR disables interrupts using IAM */
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (netif_rx_schedule_prep(netdev, napi)) {
+ adapter->tx_ring->total_bytes = 0;
+ adapter->tx_ring->total_packets = 0;
+ adapter->rx_ring->total_bytes = 0;
+ adapter->rx_ring->total_packets = 0;
+ __netif_rx_schedule(netdev, napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * igb_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct napi_struct *napi = &adapter->napi;
+ struct e1000_hw *hw = &adapter->hw;
+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
+ * need for the IMC write */
+ u32 icr = rd32(E1000_ICR);
+ u32 eicr = 0;
+ if (!icr)
+ return IRQ_NONE; /* Not our interrupt */
+
+ /* Write the ITR value calculated at the end of the
+ * previous interrupt.
+ */
+ if (adapter->set_itr) {
+ wr32(E1000_ITR,
+ 1000000000 / (adapter->itr * 256));
+ adapter->set_itr = 0;
+ }
+
+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt */
+ if (!(icr & E1000_ICR_INT_ASSERTED))
+ return IRQ_NONE;
+
+ eicr = rd32(E1000_EICR);
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (netif_rx_schedule_prep(netdev, napi)) {
+ adapter->tx_ring->total_bytes = 0;
+ adapter->rx_ring->total_bytes = 0;
+ adapter->tx_ring->total_packets = 0;
+ adapter->rx_ring->total_packets = 0;
+ __netif_rx_schedule(netdev, napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * igb_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ **/
+static int igb_clean(struct napi_struct *napi, int budget)
+{
+ struct igb_adapter *adapter = container_of(napi, struct igb_adapter,
+ napi);
+ struct net_device *netdev = adapter->netdev;
+ int tx_clean_complete = 1, work_done = 0;
+ int i;
+
+ /* Must NOT use netdev_priv macro here. */
+ adapter = netdev->priv;
+
+ /* Keep link state information with original netdev */
+ if (!netif_carrier_ok(netdev))
+ goto quit_polling;
+
+ /* igb_clean is called per-cpu. This lock protects tx_ring[i] from
+ * being cleaned by multiple cpus simultaneously. A failure obtaining
+ * the lock means tx_ring[i] is currently being cleaned anyway. */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ if (spin_trylock(&adapter->tx_ring[i].tx_clean_lock)) {
+ tx_clean_complete &= igb_clean_tx_irq(adapter,
+ &adapter->tx_ring[i]);
+ spin_unlock(&adapter->tx_ring[i].tx_clean_lock);
+ }
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_clean_rx_irq_adv(adapter, &adapter->rx_ring[i], &work_done,
+ adapter->rx_ring[i].napi.weight);
+
+ /* If no Tx and not enough Rx work done, exit the polling mode */
+ if ((tx_clean_complete && (work_done < budget)) ||
+ !netif_running(netdev)) {
+quit_polling:
+ if (adapter->itr_setting & 3)
+ igb_set_itr(adapter, E1000_ITR, false);
+ netif_rx_complete(netdev, napi);
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ igb_irq_enable(adapter);
+ return 0;
+ }
+
+ return 1;
+}
+
+static int igb_clean_rx_ring_msix(struct napi_struct *napi, int budget)
+{
+ struct igb_ring *rx_ring = container_of(napi, struct igb_ring, napi);
+ struct igb_adapter *adapter = rx_ring->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ int work_done = 0;
+
+ /* Keep link state information with original netdev */
+ if (!netif_carrier_ok(netdev))
+ goto quit_polling;
+
+ igb_clean_rx_irq_adv(adapter, rx_ring, &work_done, budget);
+
+
+ /* If not enough Rx work done, exit the polling mode */
+ if ((work_done == 0) || !netif_running(netdev)) {
+quit_polling:
+ netif_rx_complete(netdev, napi);
+
+ wr32(E1000_EIMS, rx_ring->eims_value);
+ if ((adapter->itr_setting & 3) && !rx_ring->no_itr_adjust &&
+ (rx_ring->total_packets > IGB_DYN_ITR_PACKET_THRESHOLD)) {
+ int mean_size = rx_ring->total_bytes /
+ rx_ring->total_packets;
+ if (mean_size < IGB_DYN_ITR_LENGTH_LOW)
+ igb_raise_rx_eitr(adapter, rx_ring);
+ else if (mean_size > IGB_DYN_ITR_LENGTH_HIGH)
+ igb_lower_rx_eitr(adapter, rx_ring);
+ }
+ return 0;
+ }
+
+ return 1;
+}
+/**
+ * igb_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ * returns true if ring is completely cleaned
+ **/
+static bool igb_clean_tx_irq(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_desc *tx_desc;
+ struct igb_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ u32 head, oldhead;
+ unsigned int count = 0;
+ bool cleaned = false;
+ bool retval = true;
+ unsigned int total_bytes = 0, total_packets = 0;
+
+ rmb();
+ head = *(volatile u32 *)((struct e1000_tx_desc *)tx_ring->desc
+ + tx_ring->count);
+ head = le32_to_cpu(head);
+ i = tx_ring->next_to_clean;
+ while (1) {
+ while (i != head) {
+ cleaned = true;
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ skb = buffer_info->skb;
+
+ if (skb) {
+ unsigned int segs, bytecount;
+ /* gso_segs is currently only valid for tcp */
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_packets += segs;
+ total_bytes += bytecount;
+ }
+
+ igb_unmap_and_free_tx_resource(adapter, buffer_info);
+ tx_desc->upper.data = 0;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ count++;
+ if (count == IGB_MAX_TX_CLEAN) {
+ retval = false;
+ goto done_cleaning;
+ }
+ }
+ oldhead = head;
+ rmb();
+ head = *(volatile u32 *)((struct e1000_tx_desc *)tx_ring->desc
+ + tx_ring->count);
+ head = le32_to_cpu(head);
+ if (head == oldhead)
+ goto done_cleaning;
+ } /* while (1) */
+
+done_cleaning:
+ tx_ring->next_to_clean = i;
+
+ if (unlikely(cleaned &&
+ netif_carrier_ok(netdev) &&
+ IGB_DESC_UNUSED(tx_ring) >= IGB_TX_QUEUE_WAKE)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__IGB_DOWN, &adapter->state))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (tx_ring->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ tx_ring->detect_tx_hung = false;
+ if (tx_ring->buffer_info[i].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
+ (adapter->tx_timeout_factor * HZ))
+ && !(rd32(E1000_STATUS) &
+ E1000_STATUS_TXOFF)) {
+
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ /* detected Tx unit hang */
+ dev_err(&adapter->pdev->dev,
+ "Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ " head (WB) <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " jiffies <%lx>\n"
+ " desc.status <%x>\n",
+ (unsigned long)((tx_ring - adapter->tx_ring) /
+ sizeof(struct igb_ring)),
+ readl(adapter->hw.hw_addr + tx_ring->head),
+ readl(adapter->hw.hw_addr + tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ head,
+ tx_ring->buffer_info[i].time_stamp,
+ jiffies,
+ tx_desc->upper.fields.status);
+ netif_stop_queue(netdev);
+ }
+ }
+ tx_ring->total_bytes += total_bytes;
+ tx_ring->total_packets += total_packets;
+ adapter->net_stats.tx_bytes += total_bytes;
+ adapter->net_stats.tx_packets += total_packets;
+ return retval;
+}
+
+
+/**
+ * igb_receive_skb - helper function to handle rx indications
+ * @adapter: board private structure
+ * @status: descriptor status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ **/
+static void igb_receive_skb(struct igb_adapter *adapter, u8 status, u16 vlan,
+ struct sk_buff *skb)
+{
+ if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(vlan) &
+ E1000_RXD_SPC_VLAN_MASK);
+ else
+ netif_receive_skb(skb);
+}
+
+
+static inline void igb_rx_checksum_adv(struct igb_adapter *adapter,
+ u32 status_err, struct sk_buff *skb)
+{
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Ignore Checksum bit is set or checksum is disabled through ethtool */
+ if ((status_err & E1000_RXD_STAT_IXSM) || !adapter->rx_csum)
+ return;
+ /* TCP/UDP checksum error bit is set */
+ if (status_err &
+ (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ adapter->hw_csum_good++;
+}
+
+static bool igb_clean_rx_irq_adv(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring,
+ int *work_done, int budget)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_adv_rx_desc *rx_desc , *next_rxd;
+ struct igb_buffer *buffer_info , *next_buffer;
+ struct sk_buff *skb;
+ unsigned int i, j;
+ u32 length, hlen, staterr;
+ bool cleaned = false;
+ int cleaned_count = 0;
+ unsigned int total_bytes = 0, total_packets = 0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ while (staterr & E1000_RXD_STAT_DD) {
+ if (*work_done >= budget)
+ break;
+ (*work_done)++;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ /* HW will not DMA in data larger than the given buffer, even
+ * if it parses the (NFS, of course) header to be larger. In
+ * that case, it fills the header buffer and spills the rest
+ * into the page.
+ */
+ hlen = le16_to_cpu((rx_desc->wb.lower.lo_dword.hdr_info &
+ E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT);
+ if (hlen > adapter->rx_ps_hdr_size)
+ hlen = adapter->rx_ps_hdr_size;
+
+ length = le16_to_cpu(rx_desc->wb.upper.length);
+ cleaned = true;
+ cleaned_count++;
+
+ if (rx_ring->pending_skb != NULL) {
+ skb = rx_ring->pending_skb;
+ rx_ring->pending_skb = NULL;
+ j = rx_ring->pending_skb_page;
+ } else {
+ skb = buffer_info->skb;
+ prefetch(skb->data - NET_IP_ALIGN);
+ buffer_info->skb = NULL;
+ if (hlen) {
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_ps_hdr_size +
+ NET_IP_ALIGN,
+ PCI_DMA_FROMDEVICE);
+ skb_put(skb, hlen);
+ } else {
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len +
+ NET_IP_ALIGN,
+ PCI_DMA_FROMDEVICE);
+ skb_put(skb, length);
+ goto send_up;
+ }
+ j = 0;
+ }
+
+ while (length) {
+ pci_unmap_page(pdev, buffer_info->page_dma,
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ buffer_info->page_dma = 0;
+ skb_fill_page_desc(skb, j, buffer_info->page,
+ 0, length);
+ buffer_info->page = NULL;
+
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+ rx_desc->wb.upper.status_error = 0;
+ if (staterr & E1000_RXD_STAT_EOP)
+ break;
+
+ j++;
+ cleaned_count++;
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+
+ buffer_info = &rx_ring->buffer_info[i];
+ rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ length = le16_to_cpu(rx_desc->wb.upper.length);
+ if (!(staterr & E1000_RXD_STAT_DD)) {
+ rx_ring->pending_skb = skb;
+ rx_ring->pending_skb_page = j;
+ goto out;
+ }
+ }
+send_up:
+ pskb_trim(skb, skb->len - 4);
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ next_rxd = E1000_RX_DESC_ADV(*rx_ring, i);
+ prefetch(next_rxd);
+ next_buffer = &rx_ring->buffer_info[i];
+
+ if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+ rx_ring->no_itr_adjust |= (staterr & E1000_RXD_STAT_DYNINT);
+
+ total_bytes += skb->len;
+ total_packets++;
+
+ igb_rx_checksum_adv(adapter, staterr, skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ igb_receive_skb(adapter, staterr, rx_desc->wb.upper.vlan, skb);
+
+ netdev->last_rx = jiffies;
+
+next_desc:
+ rx_desc->wb.upper.status_error = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
+ igb_alloc_rx_buffers_adv(adapter, rx_ring,
+ cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ }
+out:
+ rx_ring->next_to_clean = i;
+ cleaned_count = IGB_DESC_UNUSED(rx_ring);
+
+ if (cleaned_count)
+ igb_alloc_rx_buffers_adv(adapter, rx_ring, cleaned_count);
+
+ rx_ring->total_packets += total_packets;
+ rx_ring->total_bytes += total_bytes;
+ rx_ring->rx_stats.packets += total_packets;
+ rx_ring->rx_stats.bytes += total_bytes;
+ adapter->net_stats.rx_bytes += total_bytes;
+ adapter->net_stats.rx_packets += total_packets;
+ return cleaned;
+}
+
+
+/**
+ * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+static void igb_alloc_rx_buffers_adv(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring,
+ int cleaned_count)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_adv_rx_desc *rx_desc;
+ struct igb_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
+
+ if (adapter->rx_ps_hdr_size && !buffer_info->page) {
+ buffer_info->page = alloc_page(GFP_ATOMIC);
+ if (!buffer_info->page) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+ buffer_info->page_dma =
+ pci_map_page(pdev,
+ buffer_info->page,
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ if (!buffer_info->skb) {
+ int bufsz;
+
+ if (adapter->rx_ps_hdr_size)
+ bufsz = adapter->rx_ps_hdr_size;
+ else
+ bufsz = adapter->rx_buffer_len;
+ bufsz += NET_IP_ALIGN;
+ skb = netdev_alloc_skb(netdev, bufsz);
+
+ if (!skb) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ buffer_info->skb = skb;
+ buffer_info->dma = pci_map_single(pdev, skb->data,
+ bufsz,
+ PCI_DMA_FROMDEVICE);
+
+ }
+ /* Refresh the desc even if buffer_addrs didn't change because
+ * each write-back erases this info. */
+ if (adapter->rx_ps_hdr_size) {
+ rx_desc->read.pkt_addr =
+ cpu_to_le64(buffer_info->page_dma);
+ rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
+ } else {
+ rx_desc->read.pkt_addr =
+ cpu_to_le64(buffer_info->dma);
+ rx_desc->read.hdr_addr = 0;
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+no_buffers:
+ if (rx_ring->next_to_use != i) {
+ rx_ring->next_to_use = i;
+ if (i == 0)
+ i = (rx_ring->count - 1);
+ else
+ i--;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ }
+}
+
+/**
+ * igb_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->hw.phy.addr;
+ break;
+ case SIOCGMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (adapter->hw.phy.ops.read_phy_reg(&adapter->hw,
+ data->reg_num
+ & 0x1F, &data->val_out))
+ return -EIO;
+ break;
+ case SIOCSMIIREG:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/**
+ * igb_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return igb_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void igb_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+
+ igb_irq_disable(adapter);
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+
+ /* enable VLAN receive filtering */
+ rctl = rd32(E1000_RCTL);
+ rctl |= E1000_RCTL_VFE;
+ rctl &= ~E1000_RCTL_CFIEN;
+ wr32(E1000_RCTL, rctl);
+ igb_update_mng_vlan(adapter);
+ wr32(E1000_RLPML,
+ adapter->max_frame_size + VLAN_TAG_SIZE);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+
+ /* disable VLAN filtering */
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~E1000_RCTL_VFE;
+ wr32(E1000_RCTL, rctl);
+ if (adapter->mng_vlan_id != (u16)IGB_MNG_VLAN_NONE) {
+ igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+ }
+ wr32(E1000_RLPML,
+ adapter->max_frame_size);
+ }
+
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ igb_irq_enable(adapter);
+}
+
+static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
+ (vid == adapter->mng_vlan_id))
+ return;
+ /* add VID to filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = array_rd32(E1000_VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ igb_write_vfta(&adapter->hw, index, vfta);
+}
+
+static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ igb_irq_disable(adapter);
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
+
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ igb_irq_enable(adapter);
+
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
+ (vid == adapter->mng_vlan_id)) {
+ /* release control to f/w */
+ igb_release_hw_control(adapter);
+ return;
+ }
+
+ /* remove VID from filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = array_rd32(E1000_VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ igb_write_vfta(&adapter->hw, index, vfta);
+}
+
+static void igb_restore_vlan(struct igb_adapter *adapter)
+{
+ igb_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+ if (adapter->vlgrp) {
+ u16 vid;
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid))
+ continue;
+ igb_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+ }
+}
+
+int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
+{
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ mac->autoneg = 0;
+
+ /* Fiber NICs only allow 1000 gbps Full duplex */
+ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
+ spddplx != (SPEED_1000 + DUPLEX_FULL)) {
+ dev_err(&adapter->pdev->dev,
+ "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+
+ switch (spddplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_10_HALF;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_10_FULL;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_100_HALF;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_100_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ mac->autoneg = 1;
+ adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ dev_err(&adapter->pdev->dev,
+ "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, ctrl_ext, rctl, status;
+ u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
+ igb_down(adapter);
+ igb_free_irq(adapter);
+ }
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ igb_setup_rctl(adapter);
+ igb_set_multi(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = rd32(E1000_RCTL);
+ rctl |= E1000_RCTL_MPE;
+ wr32(E1000_RCTL, rctl);
+ }
+
+ ctrl = rd32(E1000_CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC;
+ wr32(E1000_CTRL, ctrl);
+
+ if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
+ adapter->hw.phy.media_type ==
+ e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+ }
+
+ /* Allow time for pending master requests to run */
+ igb_disable_pcie_master(&adapter->hw);
+
+ wr32(E1000_WUC, E1000_WUC_PME_EN);
+ wr32(E1000_WUFC, wufc);
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_enable_wake(pdev, PCI_D3cold, 1);
+ } else {
+ wr32(E1000_WUC, 0);
+ wr32(E1000_WUFC, 0);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+ }
+
+ igb_release_manageability(adapter);
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->en_mng_pt) {
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_enable_wake(pdev, PCI_D3cold, 1);
+ }
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ igb_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int igb_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "igb: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (netif_running(netdev)) {
+ err = igb_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ /* e1000_power_up_phy(adapter); */
+
+ igb_reset(adapter);
+ wr32(E1000_WUS, ~0);
+
+ igb_init_manageability(adapter);
+
+ if (netif_running(netdev))
+ igb_up(adapter);
+
+ netif_device_attach(netdev);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver. */
+ igb_get_hw_control(adapter);
+
+ return 0;
+}
+#endif
+
+static void igb_shutdown(struct pci_dev *pdev)
+{
+ igb_suspend(pdev, PMSG_SUSPEND);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void igb_netpoll(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int i;
+ int work_done = 0;
+
+ igb_irq_disable(adapter);
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_clean_tx_irq(adapter, &adapter->tx_ring[i]);
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_clean_rx_irq_adv(adapter, &adapter->rx_ring[i],
+ &work_done,
+ adapter->rx_ring[i].napi.weight);
+
+ igb_irq_enable(adapter);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * igb_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igb_resume routine.
+ */
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ igb_reset(adapter);
+ wr32(E1000_WUS, ~0);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * igb_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igb_resume routine.
+ */
+static void igb_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ igb_init_manageability(adapter);
+
+ if (netif_running(netdev)) {
+ if (igb_up(adapter)) {
+ dev_err(&pdev->dev, "igb_up failed after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver. */
+ igb_get_hw_control(adapter);
+
+}
+
+/* igb_main.c */