summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/sky2.c46
-rw-r--r--drivers/net/tg3.c144
-rw-r--r--drivers/net/tg3.h3
3 files changed, 81 insertions, 112 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 959109609d85..97fe95666f3b 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -187,12 +187,11 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
return v;
}
-static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
+static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
{
u16 power_control;
u32 reg1;
int vaux;
- int ret = 0;
pr_debug("sky2_set_power_state %d\n", state);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
@@ -275,12 +274,10 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
break;
default:
printk(KERN_ERR PFX "Unknown power state %d\n", state);
- ret = -1;
}
sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
- return ret;
}
static void sky2_phy_reset(struct sky2_hw *hw, unsigned port)
@@ -2164,6 +2161,13 @@ static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
/* If idle then force a fake soft NAPI poll once a second
* to work around cases where sharing an edge triggered interrupt.
*/
+static inline void sky2_idle_start(struct sky2_hw *hw)
+{
+ if (idle_timeout > 0)
+ mod_timer(&hw->idle_timer,
+ jiffies + msecs_to_jiffies(idle_timeout));
+}
+
static void sky2_idle(unsigned long arg)
{
struct sky2_hw *hw = (struct sky2_hw *) arg;
@@ -2183,6 +2187,9 @@ static int sky2_poll(struct net_device *dev0, int *budget)
int work_done = 0;
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
+ if (!~status)
+ goto out;
+
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
@@ -2219,7 +2226,7 @@ static int sky2_poll(struct net_device *dev0, int *budget)
if (sky2_more_work(hw))
return 1;
-
+out:
netif_rx_complete(dev0);
sky2_read32(hw, B0_Y2_SP_LISR);
@@ -3350,9 +3357,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
- if (idle_timeout > 0)
- mod_timer(&hw->idle_timer,
- jiffies + msecs_to_jiffies(idle_timeout));
+ sky2_idle_start(hw);
pci_set_drvdata(pdev, hw);
@@ -3425,8 +3430,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i;
+ pci_power_t pstate = pci_choose_state(pdev, state);
+
+ if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
+ return -EINVAL;
+
+ del_timer_sync(&hw->idle_timer);
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
if (dev) {
@@ -3438,7 +3449,10 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
}
}
- return sky2_set_power_state(hw, pci_choose_state(pdev, state));
+ sky2_write32(hw, B0_IMSK, 0);
+ pci_save_state(pdev);
+ sky2_set_power_state(hw, pstate);
+ return 0;
}
static int sky2_resume(struct pci_dev *pdev)
@@ -3448,15 +3462,15 @@ static int sky2_resume(struct pci_dev *pdev)
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D0, 0);
- err = sky2_set_power_state(hw, PCI_D0);
- if (err)
- goto out;
+ sky2_set_power_state(hw, PCI_D0);
err = sky2_reset(hw);
if (err)
goto out;
- for (i = 0; i < 2; i++) {
+ sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
+
+ for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
if (dev && netif_running(dev)) {
netif_device_attach(dev);
@@ -3465,10 +3479,12 @@ static int sky2_resume(struct pci_dev *pdev)
printk(KERN_ERR PFX "%s: could not up: %d\n",
dev->name, err);
dev_close(dev);
- break;
+ goto out;
}
}
}
+
+ sky2_idle_start(hw);
out:
return err;
}
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 49ad60b72657..862c226dbbe2 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.58"
-#define DRV_MODULE_RELDATE "May 22, 2006"
+#define DRV_MODULE_VERSION "3.59"
+#define DRV_MODULE_RELDATE "June 8, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -4485,9 +4485,8 @@ static void tg3_disable_nvram_access(struct tg3 *tp)
/* tp->lock is held. */
static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind)
{
- if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X))
- tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
- NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
+ tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
+ NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
switch (kind) {
@@ -4568,13 +4567,12 @@ static int tg3_chip_reset(struct tg3 *tp)
void (*write_op)(struct tg3 *, u32, u32);
int i;
- if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
- tg3_nvram_lock(tp);
- /* No matching tg3_nvram_unlock() after this because
- * chip reset below will undo the nvram lock.
- */
- tp->nvram_lock_cnt = 0;
- }
+ tg3_nvram_lock(tp);
+
+ /* No matching tg3_nvram_unlock() after this because
+ * chip reset below will undo the nvram lock.
+ */
+ tp->nvram_lock_cnt = 0;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
@@ -4727,20 +4725,25 @@ static int tg3_chip_reset(struct tg3 *tp)
tw32_f(MAC_MODE, 0);
udelay(40);
- if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
- /* Wait for firmware initialization to complete. */
- for (i = 0; i < 100000; i++) {
- tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
- if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
- break;
- udelay(10);
- }
- if (i >= 100000) {
- printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, "
- "firmware will not restart magic=%08x\n",
- tp->dev->name, val);
- return -ENODEV;
- }
+ /* Wait for firmware initialization to complete. */
+ for (i = 0; i < 100000; i++) {
+ tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
+ if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
+ break;
+ udelay(10);
+ }
+
+ /* Chip might not be fitted with firmare. Some Sun onboard
+ * parts are configured like that. So don't signal the timeout
+ * of the above loop as an error, but do report the lack of
+ * running firmware once.
+ */
+ if (i >= 100000 &&
+ !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
+ tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
+
+ printk(KERN_INFO PFX "%s: No firmware running.\n",
+ tp->dev->name);
}
if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
@@ -9075,9 +9078,6 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
{
int j;
- if (tp->tg3_flags2 & TG3_FLG2_SUN_570X)
- return;
-
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -9210,11 +9210,6 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
{
int ret;
- if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
- printk(KERN_ERR PFX "Attempt to do nvram_read on Sun 570X\n");
- return -EINVAL;
- }
-
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
@@ -9447,11 +9442,6 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
{
int ret;
- if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
- printk(KERN_ERR PFX "Attempt to do nvram_write on Sun 570X\n");
- return -EINVAL;
- }
-
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
@@ -9578,15 +9568,19 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
tp->misc_host_ctrl);
+ /* The memory arbiter has to be enabled in order for SRAM accesses
+ * to succeed. Normally on powerup the tg3 chip firmware will make
+ * sure it is enabled, but other entities such as system netboot
+ * code might disable it.
+ */
+ val = tr32(MEMARB_MODE);
+ tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
+
tp->phy_id = PHY_ID_INVALID;
tp->led_ctrl = LED_CTRL_MODE_PHY_1;
- /* Do not even try poking around in here on Sun parts. */
- if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
- /* All SUN chips are built-in LOMs. */
- tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
- return;
- }
+ /* Assume an onboard device by default. */
+ tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
if (val == NIC_SRAM_DATA_SIG_MAGIC) {
@@ -9686,6 +9680,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP)
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
+ else
+ tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
@@ -9834,16 +9830,8 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
int i;
u32 magic;
- if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
- /* Sun decided not to put the necessary bits in the
- * NVRAM of their onboard tg3 parts :(
- */
- strcpy(tp->board_part_number, "Sun 570X");
- return;
- }
-
if (tg3_nvram_read_swab(tp, 0x0, &magic))
- return;
+ goto out_not_found;
if (magic == TG3_EEPROM_MAGIC) {
for (i = 0; i < 256; i += 4) {
@@ -9874,6 +9862,9 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
break;
msleep(1);
}
+ if (!(tmp16 & 0x8000))
+ goto out_not_found;
+
pci_read_config_dword(tp->pdev, vpd_cap + PCI_VPD_DATA,
&tmp);
tmp = cpu_to_le32(tmp);
@@ -9965,37 +9956,6 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
}
}
-#ifdef CONFIG_SPARC64
-static int __devinit tg3_is_sun_570X(struct tg3 *tp)
-{
- struct pci_dev *pdev = tp->pdev;
- struct pcidev_cookie *pcp = pdev->sysdata;
-
- if (pcp != NULL) {
- int node = pcp->prom_node;
- u32 venid;
- int err;
-
- err = prom_getproperty(node, "subsystem-vendor-id",
- (char *) &venid, sizeof(venid));
- if (err == 0 || err == -1)
- return 0;
- if (venid == PCI_VENDOR_ID_SUN)
- return 1;
-
- /* TG3 chips onboard the SunBlade-2500 don't have the
- * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
- * are distinguishable from non-Sun variants by being
- * named "network" by the firmware. Non-Sun cards will
- * show up as being named "ethernet".
- */
- if (!strcmp(pcp->prom_name, "network"))
- return 1;
- }
- return 0;
-}
-#endif
-
static int __devinit tg3_get_invariants(struct tg3 *tp)
{
static struct pci_device_id write_reorder_chipsets[] = {
@@ -10012,11 +9972,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
u16 pci_cmd;
int err;
-#ifdef CONFIG_SPARC64
- if (tg3_is_sun_570X(tp))
- tp->tg3_flags2 |= TG3_FLG2_SUN_570X;
-#endif
-
/* Force memory write invalidate off. If we leave it on,
* then on 5700_BX chips we have to enable a workaround.
* The workaround is to set the TG3PCI_DMA_RW_CTRL boundary
@@ -10312,8 +10267,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tp->write32 == tg3_write_indirect_reg32 ||
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) ||
- (tp->tg3_flags2 & TG3_FLG2_SUN_570X))
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
/* Get eeprom hw config before calling tg3_set_power_state().
@@ -10594,8 +10548,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
#endif
mac_offset = 0x7c;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
- !(tp->tg3_flags & TG3_FLG2_SUN_570X)) ||
+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
mac_offset = 0xcc;
@@ -10622,8 +10575,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
}
if (!addr_ok) {
/* Next, try NVRAM. */
- if (!(tp->tg3_flags & TG3_FLG2_SUN_570X) &&
- !tg3_nvram_read(tp, mac_offset + 0, &hi) &&
+ if (!tg3_nvram_read(tp, mac_offset + 0, &hi) &&
!tg3_nvram_read(tp, mac_offset + 4, &lo)) {
dev->dev_addr[0] = ((hi >> 16) & 0xff);
dev->dev_addr[1] = ((hi >> 24) & 0xff);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 0e29b885d449..ff0faab94bd5 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2184,7 +2184,7 @@ struct tg3 {
#define TG3_FLAG_INIT_COMPLETE 0x80000000
u32 tg3_flags2;
#define TG3_FLG2_RESTART_TIMER 0x00000001
-#define TG3_FLG2_SUN_570X 0x00000002
+/* 0x00000002 available */
#define TG3_FLG2_NO_ETH_WIRE_SPEED 0x00000004
#define TG3_FLG2_IS_5788 0x00000008
#define TG3_FLG2_MAX_RXPEND_64 0x00000010
@@ -2216,6 +2216,7 @@ struct tg3 {
#define TG3_FLG2_HW_TSO (TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2)
#define TG3_FLG2_1SHOT_MSI 0x10000000
#define TG3_FLG2_PHY_JITTER_BUG 0x20000000
+#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 10:28:21 +0000