summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/Kconfig10
-rw-r--r--drivers/net/wireless/admtek/Kconfig4
-rw-r--r--drivers/net/wireless/ath/Kconfig10
-rw-r--r--drivers/net/wireless/ath/ar5523/Kconfig2
-rw-r--r--drivers/net/wireless/ath/ath10k/Kconfig22
-rw-r--r--drivers/net/wireless/ath/ath11k/Kconfig8
-rw-r--r--drivers/net/wireless/ath/ath5k/Kconfig12
-rw-r--r--drivers/net/wireless/ath/ath6kl/Kconfig12
-rw-r--r--drivers/net/wireless/ath/ath9k/Kconfig30
-rw-r--r--drivers/net/wireless/ath/wcn36xx/Kconfig4
-rw-r--r--drivers/net/wireless/ath/wil6210/Kconfig8
-rw-r--r--drivers/net/wireless/atmel/Kconfig10
-rw-r--r--drivers/net/wireless/broadcom/Kconfig2
-rw-r--r--drivers/net/wireless/broadcom/b43/Kconfig18
-rw-r--r--drivers/net/wireless/broadcom/b43legacy/Kconfig10
-rw-r--r--drivers/net/wireless/broadcom/brcm80211/Kconfig6
-rw-r--r--drivers/net/wireless/cisco/Kconfig6
-rw-r--r--drivers/net/wireless/intel/Kconfig2
-rw-r--r--drivers/net/wireless/intel/ipw2x00/Kconfig18
-rw-r--r--drivers/net/wireless/intel/iwlegacy/Kconfig8
-rw-r--r--drivers/net/wireless/intel/iwlwifi/Kconfig6
-rw-r--r--drivers/net/wireless/intersil/Kconfig4
-rw-r--r--drivers/net/wireless/intersil/hostap/Kconfig12
-rw-r--r--drivers/net/wireless/intersil/orinoco/Kconfig12
-rw-r--r--drivers/net/wireless/intersil/p54/Kconfig10
-rw-r--r--drivers/net/wireless/marvell/Kconfig4
-rw-r--r--drivers/net/wireless/marvell/libertas/Kconfig12
-rw-r--r--drivers/net/wireless/marvell/libertas_tf/Kconfig6
-rw-r--r--drivers/net/wireless/marvell/mwifiex/Kconfig8
-rw-r--r--drivers/net/wireless/mediatek/Kconfig2
-rw-r--r--drivers/net/wireless/mediatek/mt7601u/Kconfig2
-rw-r--r--drivers/net/wireless/ralink/Kconfig2
-rw-r--r--drivers/net/wireless/ralink/rt2x00/Kconfig42
-rw-r--r--drivers/net/wireless/realtek/Kconfig2
-rw-r--r--drivers/net/wireless/realtek/rtl818x/Kconfig4
-rw-r--r--drivers/net/wireless/realtek/rtl8xxxu/Kconfig4
-rw-r--r--drivers/net/wireless/realtek/rtlwifi/Kconfig22
-rw-r--r--drivers/net/wireless/rsi/Kconfig12
-rw-r--r--drivers/net/wireless/st/Kconfig2
-rw-r--r--drivers/net/wireless/ti/Kconfig4
-rw-r--r--drivers/net/wireless/ti/wl1251/Kconfig6
-rw-r--r--drivers/net/wireless/ti/wl12xx/Kconfig2
-rw-r--r--drivers/net/wireless/ti/wl18xx/Kconfig2
-rw-r--r--drivers/net/wireless/ti/wlcore/Kconfig6
-rw-r--r--drivers/net/wireless/zydas/Kconfig4
-rw-r--r--drivers/net/wireless/zydas/zd1211rw/Kconfig4
46 files changed, 199 insertions, 199 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 15b0ad171f4c..8ab62bb6b853 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -9,7 +9,7 @@ menuconfig WLAN
depends on NET
select WIRELESS
default y
- ---help---
+ help
This section contains all the pre 802.11 and 802.11 wireless
device drivers. For a complete list of drivers and documentation
on them refer to the wireless wiki:
@@ -54,7 +54,7 @@ config PCMCIA_RAYCS
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
- ---help---
+ help
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
(PC-card) wireless Ethernet networking card to your computer.
Please read the file <file:Documentation/networking/ray_cs.rst> for
@@ -76,7 +76,7 @@ config PCMCIA_WL3501
config MAC80211_HWSIM
tristate "Simulated radio testing tool for mac80211"
depends on MAC80211
- ---help---
+ help
This driver is a developer testing tool that can be used to test
IEEE 802.11 networking stack (mac80211) functionality. This is not
needed for normal wireless LAN usage and is only for testing. See
@@ -94,7 +94,7 @@ config USB_NET_RNDIS_WLAN
select USB_USBNET
select USB_NET_CDCETHER
select USB_NET_RNDIS_HOST
- ---help---
+ help
This is a driver for wireless RNDIS devices.
These are USB based adapters found in devices such as:
@@ -118,7 +118,7 @@ config USB_NET_RNDIS_WLAN
config VIRT_WIFI
tristate "Wifi wrapper for ethernet drivers"
depends on CFG80211
- ---help---
+ help
This option adds support for ethernet connections to appear as if they
are wifi connections through a special rtnetlink device.
diff --git a/drivers/net/wireless/admtek/Kconfig b/drivers/net/wireless/admtek/Kconfig
index a91cc1459c96..678979a1d987 100644
--- a/drivers/net/wireless/admtek/Kconfig
+++ b/drivers/net/wireless/admtek/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_ADMTEK
bool "ADMtek devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -17,7 +17,7 @@ config ADM8211
depends on MAC80211 && PCI
select CRC32
select EEPROM_93CX6
- ---help---
+ help
This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index b10972b6cba4..6e9d46b96555 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -5,7 +5,7 @@ config ATH_COMMON
config WLAN_VENDOR_ATH
bool "Atheros/Qualcomm devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -25,7 +25,7 @@ if WLAN_VENDOR_ATH
config ATH_DEBUG
bool "Atheros wireless debugging"
- ---help---
+ help
Say Y, if you want to debug atheros wireless drivers.
Right now only ath9k makes use of this.
@@ -33,7 +33,7 @@ config ATH_TRACEPOINTS
bool "Atheros wireless tracing"
depends on ATH_DEBUG
depends on EVENT_TRACING
- ---help---
+ help
This option enables tracepoints for atheros wireless drivers.
Currently, ath9k makes use of this facility.
@@ -41,7 +41,7 @@ config ATH_REG_DYNAMIC_USER_REG_HINTS
bool "Atheros dynamic user regulatory hints"
depends on CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
Say N. This should only be enabled in countries where
this feature is explicitly allowed and only on cards that
specifically have been tested for this.
@@ -50,7 +50,7 @@ config ATH_REG_DYNAMIC_USER_CERT_TESTING
bool "Atheros dynamic user regulatory testing"
depends on ATH_REG_DYNAMIC_USER_REG_HINTS && CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
Say N. This should only be enabled on systems
undergoing certification testing.
diff --git a/drivers/net/wireless/ath/ar5523/Kconfig b/drivers/net/wireless/ath/ar5523/Kconfig
index e82df5f1ea67..0d838c1e7b12 100644
--- a/drivers/net/wireless/ath/ar5523/Kconfig
+++ b/drivers/net/wireless/ath/ar5523/Kconfig
@@ -4,6 +4,6 @@ config AR5523
depends on MAC80211 && USB
select ATH_COMMON
select FW_LOADER
- ---help---
+ help
This module add support for AR5523 based USB dongles such as D-Link
DWL-G132, Netgear WPN111 and many more.
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index b99fd0eff994..40f91bc8514d 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -6,7 +6,7 @@ config ATH10K
select CRC32
select WANT_DEV_COREDUMP
select ATH10K_CE
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros IEEE 802.11ac family of chipsets.
@@ -18,25 +18,25 @@ config ATH10K_CE
config ATH10K_PCI
tristate "Atheros ath10k PCI support"
depends on ATH10K && PCI
- ---help---
+ help
This module adds support for PCIE bus
config ATH10K_AHB
bool "Atheros ath10k AHB support"
depends on ATH10K_PCI && OF && RESET_CONTROLLER
- ---help---
+ help
This module adds support for AHB bus
config ATH10K_SDIO
tristate "Atheros ath10k SDIO support"
depends on ATH10K && MMC
- ---help---
+ help
This module adds support for SDIO/MMC bus.
config ATH10K_USB
tristate "Atheros ath10k USB support (EXPERIMENTAL)"
depends on ATH10K && USB
- ---help---
+ help
This module adds experimental support for USB bus. Currently
work in progress and will not fully work.
@@ -45,14 +45,14 @@ config ATH10K_SNOC
depends on ATH10K
depends on ARCH_QCOM || COMPILE_TEST
select QCOM_QMI_HELPERS
- ---help---
+ help
This module adds support for integrated WCN3990 chip connected
to system NOC(SNOC).
config ATH10K_DEBUG
bool "Atheros ath10k debugging"
depends on ATH10K
- ---help---
+ help
Enables debug support
If unsure, say Y to make it easier to debug problems.
@@ -60,7 +60,7 @@ config ATH10K_DEBUG
config ATH10K_DEBUGFS
bool "Atheros ath10k debugfs support"
depends on ATH10K && DEBUG_FS
- ---help---
+ help
Enabled debugfs support
If unsure, say Y to make it easier to debug problems.
@@ -70,20 +70,20 @@ config ATH10K_SPECTRAL
depends on ATH10K_DEBUGFS
select RELAY
default n
- ---help---
+ help
Say Y to enable access to the FFT/spectral data via debugfs.
config ATH10K_TRACING
bool "Atheros ath10k tracing support"
depends on ATH10K
depends on EVENT_TRACING
- ---help---
+ help
Select this to ath10k use tracing infrastructure.
config ATH10K_DFS_CERTIFIED
bool "Atheros DFS support for certified platforms"
depends on ATH10K && CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
This option enables DFS support for initiating radiation on
ath10k.
diff --git a/drivers/net/wireless/ath/ath11k/Kconfig b/drivers/net/wireless/ath/ath11k/Kconfig
index 738f99090d83..7acb42e2e6e2 100644
--- a/drivers/net/wireless/ath/ath11k/Kconfig
+++ b/drivers/net/wireless/ath/ath11k/Kconfig
@@ -7,7 +7,7 @@ config ATH11K
depends on ARCH_QCOM || COMPILE_TEST
select ATH_COMMON
select QCOM_QMI_HELPERS
- ---help---
+ help
This module adds support for Qualcomm Technologies 802.11ax family of
chipsets.
@@ -16,7 +16,7 @@ config ATH11K
config ATH11K_DEBUG
bool "QCA ath11k debugging"
depends on ATH11K
- ---help---
+ help
Enables debug support
If unsure, say Y to make it easier to debug problems.
@@ -24,7 +24,7 @@ config ATH11K_DEBUG
config ATH11K_DEBUGFS
bool "QCA ath11k debugfs support"
depends on ATH11K && DEBUG_FS && MAC80211_DEBUGFS
- ---help---
+ help
Enable ath11k debugfs support
If unsure, say Y to make it easier to debug problems.
@@ -32,5 +32,5 @@ config ATH11K_DEBUGFS
config ATH11K_TRACING
bool "ath11k tracing support"
depends on ATH11K && EVENT_TRACING
- ---help---
+ help
Select this to use ath11k tracing infrastructure.
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index 96010d4b00e7..f35cd8de228e 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -8,7 +8,7 @@ config ATH5K
select NEW_LEDS
select ATH5K_AHB if ATH25
select ATH5K_PCI if !ATH25
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros 5xxx chipset.
@@ -25,7 +25,7 @@ config ATH5K
config ATH5K_DEBUG
bool "Atheros 5xxx debugging"
depends on ATH5K
- ---help---
+ help
Atheros 5xxx debugging messages.
Say Y, if and you will get debug options for ath5k.
@@ -45,7 +45,7 @@ config ATH5K_TRACER
bool "Atheros 5xxx tracer"
depends on ATH5K
depends on EVENT_TRACING
- ---help---
+ help
Say Y here to enable tracepoints for the ath5k driver
using the kernel tracing infrastructure. Select this
option if you are interested in debugging the driver.
@@ -55,21 +55,21 @@ config ATH5K_TRACER
config ATH5K_AHB
bool "Atheros 5xxx AHB bus support"
depends on ATH25 && ATH5K
- ---help---
+ help
This adds support for WiSoC type chipsets of the 5xxx Atheros
family.
config ATH5K_PCI
bool "Atheros 5xxx PCI bus support"
depends on (!ATH25 && PCI)
- ---help---
+ help
This adds support for PCI type chipsets of the 5xxx Atheros
family.
config ATH5K_TEST_CHANNELS
bool "Enables testing channels on ath5k"
depends on ATH5K && CFG80211_CERTIFICATION_ONUS
- ---help---
+ help
This enables non-standard IEEE 802.11 channels on ath5k, which
can be used for research purposes. This option should be disabled
unless doing research.
diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig
index 62c22fdcca38..cd96cf8d9940 100644
--- a/drivers/net/wireless/ath/ath6kl/Kconfig
+++ b/drivers/net/wireless/ath/ath6kl/Kconfig
@@ -2,7 +2,7 @@
config ATH6KL
tristate "Atheros mobile chipsets support"
depends on CFG80211
- ---help---
+ help
This module adds core support for wireless adapters based on
Atheros AR6003 and AR6004 chipsets. You still need separate
bus drivers for USB and SDIO to be able to use real devices.
@@ -15,7 +15,7 @@ config ATH6KL_SDIO
tristate "Atheros ath6kl SDIO support"
depends on ATH6KL
depends on MMC
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros AR6003 and AR6004 chipsets running over SDIO. If you
choose to build it as a module, it will be called ath6kl_sdio.
@@ -26,7 +26,7 @@ config ATH6KL_USB
tristate "Atheros ath6kl USB support"
depends on ATH6KL
depends on USB
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros AR6004 chipset and chipsets based on it running over
USB. If you choose to build it as a module, it will be
@@ -35,7 +35,7 @@ config ATH6KL_USB
config ATH6KL_DEBUG
bool "Atheros ath6kl debugging"
depends on ATH6KL
- ---help---
+ help
Enables ath6kl debug support, including debug messages
enabled with debug_mask module parameter and debugfs
interface.
@@ -46,7 +46,7 @@ config ATH6KL_TRACING
bool "Atheros ath6kl tracing support"
depends on ATH6KL
depends on EVENT_TRACING
- ---help---
+ help
Select this to ath6kl use tracing infrastructure which, for
example, can be enabled with help of trace-cmd. All debug
messages and commands are delivered to using individually
@@ -58,7 +58,7 @@ config ATH6KL_REGDOMAIN
bool "Atheros ath6kl regdomain support"
depends on ATH6KL
depends on CFG80211_CERTIFICATION_ONUS
- ---help---
+ help
Enabling this makes it possible to change the regdomain in
the firmware. This can be only enabled if regulatory requirements
are taken into account.
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 78620c6b64a2..42bfdb4a6214 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -14,7 +14,7 @@ config ATH9K_BTCOEX_SUPPORT
bool "Atheros bluetooth coexistence support"
depends on (ATH9K || ATH9K_HTC)
default y
- ---help---
+ help
Say Y, if you want to use the ath9k/ath9k_htc radios together with
Bluetooth modules in the same system.
@@ -26,7 +26,7 @@ config ATH9K
select LEDS_CLASS
select NEW_LEDS
select ATH9K_COMMON
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
of chipsets. For a specific list of supported external
@@ -42,7 +42,7 @@ config ATH9K_PCI
bool "Atheros ath9k PCI/PCIe bus support"
default y
depends on ATH9K && PCI
- ---help---
+ help
This option enables the PCI bus support in ath9k.
Say Y, if you have a compatible PCI/PCIe wireless card.
@@ -51,7 +51,7 @@ config ATH9K_AHB
bool "Atheros ath9k AHB bus support"
depends on ATH9K
default n
- ---help---
+ help
This option enables the AHB bus support in ath9k.
Say Y, if you have a SoC with a compatible built-in
@@ -62,7 +62,7 @@ config ATH9K_DEBUGFS
depends on ATH9K && DEBUG_FS
select MAC80211_DEBUGFS
select ATH9K_COMMON_DEBUG
- ---help---
+ help
Say Y, if you need access to ath9k's statistics for
interrupts, rate control, etc.
@@ -74,14 +74,14 @@ config ATH9K_STATION_STATISTICS
depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS
select MAC80211_DEBUGFS
default n
- ---help---
+ help
This option enables detailed statistics for association stations.
config ATH9K_TX99
bool "Atheros ath9k TX99 testing support"
depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
Say N. This should only be enabled on systems undergoing
certification testing and evaluation in a controlled environment.
Enabling this will only enable TX99 support, all other modes of
@@ -101,7 +101,7 @@ config ATH9K_DFS_CERTIFIED
bool "Atheros DFS support for certified platforms"
depends on ATH9K && CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
This option enables DFS support for initiating radiation on
ath9k. There is no way to dynamically detect if a card was DFS
certified and as such this is left as a build time option. This
@@ -120,7 +120,7 @@ config ATH9K_DYNACK
bool "Atheros ath9k ACK timeout estimation algorithm"
depends on ATH9K
default n
- ---help---
+ help
This option enables ath9k dynamic ACK timeout estimation algorithm
based on ACK frame RX timestamp, TX frame timestamp and frame
duration
@@ -129,7 +129,7 @@ config ATH9K_WOW
bool "Wake on Wireless LAN support (EXPERIMENTAL)"
depends on ATH9K && PM
default n
- ---help---
+ help
This option enables Wake on Wireless LAN support for certain cards.
Currently, AR9462 is supported.
@@ -147,7 +147,7 @@ config ATH9K_CHANNEL_CONTEXT
bool "Channel Context support"
depends on ATH9K
default n
- ---help---
+ help
This option enables channel context support in ath9k, which is needed
for multi-channel concurrency. Enable this if P2P PowerSave support
is required.
@@ -181,7 +181,7 @@ config ATH9K_HTC
select LEDS_CLASS
select NEW_LEDS
select ATH9K_COMMON
- ---help---
+ help
Support for Atheros HTC based cards.
Chipsets supported: AR9271
@@ -193,7 +193,7 @@ config ATH9K_HTC_DEBUGFS
bool "Atheros ath9k_htc debugging"
depends on ATH9K_HTC && DEBUG_FS
select ATH9K_COMMON_DEBUG
- ---help---
+ help
Say Y, if you need access to ath9k_htc's statistics.
As well as access to the FFT/spectral data.
@@ -201,7 +201,7 @@ config ATH9K_HWRNG
bool "Random number generator support"
depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K)
default n
- ---help---
+ help
This option incorporates the ADC register output as a source of
randomness into Linux entropy pool (/dev/urandom and /dev/random)
@@ -213,5 +213,5 @@ config ATH9K_COMMON_SPECTRAL
depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS
select RELAY
default n
- ---help---
+ help
Say Y to enable access to the FFT/spectral data via debugfs.
diff --git a/drivers/net/wireless/ath/wcn36xx/Kconfig b/drivers/net/wireless/ath/wcn36xx/Kconfig
index a4b153470a2c..5832c7ef9352 100644
--- a/drivers/net/wireless/ath/wcn36xx/Kconfig
+++ b/drivers/net/wireless/ath/wcn36xx/Kconfig
@@ -4,7 +4,7 @@ config WCN36XX
depends on MAC80211 && HAS_DMA
depends on QCOM_WCNSS_CTRL || QCOM_WCNSS_CTRL=n
depends on RPMSG || RPMSG=n
- ---help---
+ help
This module adds support for wireless adapters based on
Qualcomm Atheros WCN3660 and WCN3680 mobile chipsets.
@@ -13,7 +13,7 @@ config WCN36XX
config WCN36XX_DEBUGFS
bool "WCN36XX debugfs support"
depends on WCN36XX
- ---help---
+ help
Enabled debugfs support
If unsure, say Y to make it easier to debug problems.
diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
index 0d1a8dab30ed..dadba2d41bbb 100644
--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -5,7 +5,7 @@ config WIL6210
depends on CFG80211
depends on PCI
default n
- ---help---
+ help
This module adds support for wireless adapter based on
wil6210 chip by Wilocity. It supports operation on the
60 GHz band, covered by the IEEE802.11ad standard.
@@ -19,7 +19,7 @@ config WIL6210_ISR_COR
bool "Use Clear-On-Read mode for ISR registers for wil6210"
depends on WIL6210
default y
- ---help---
+ help
ISR registers on wil6210 chip may operate in either
COR (Clear-On-Read) or W1C (Write-1-to-Clear) mode.
For production code, use COR (say y); is default since
@@ -35,7 +35,7 @@ config WIL6210_TRACING
depends on WIL6210
depends on EVENT_TRACING
default n
- ---help---
+ help
Say Y here to enable tracepoints for the wil6210 driver
using the kernel tracing infrastructure. Select this
option if you are interested in debugging the driver.
@@ -47,7 +47,7 @@ config WIL6210_DEBUGFS
depends on WIL6210
depends on DEBUG_FS
default y
- ---help---
+ help
Say Y here to enable wil6210 debugfs support, using the
kernel debugfs infrastructure. Select this
option if you are interested in debugging the driver.
diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig
index c2142c70f25d..ca45a1021cf4 100644
--- a/drivers/net/wireless/atmel/Kconfig
+++ b/drivers/net/wireless/atmel/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_ATMEL
bool "Atmel devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -19,7 +19,7 @@ config ATMEL
select WEXT_PRIV
select FW_LOADER
select CRC32
- ---help---
+ help
A driver 802.11b wireless cards based on the Atmel fast-vnet
chips. This driver supports standard Linux wireless extensions.
@@ -33,7 +33,7 @@ config ATMEL
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
depends on ATMEL && PCI
- ---help---
+ help
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
@@ -43,7 +43,7 @@ config PCMCIA_ATMEL
select WIRELESS_EXT
select FW_LOADER
select CRC32
- ---help---
+ help
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
@@ -51,7 +51,7 @@ config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && USB
select FW_LOADER
- ---help---
+ help
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
diff --git a/drivers/net/wireless/broadcom/Kconfig b/drivers/net/wireless/broadcom/Kconfig
index bb1cb402a919..f74333366a90 100644
--- a/drivers/net/wireless/broadcom/Kconfig
+++ b/drivers/net/wireless/broadcom/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_BROADCOM
bool "Broadcom devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/broadcom/b43/Kconfig b/drivers/net/wireless/broadcom/b43/Kconfig
index 3b582e76762b..4559549b80fe 100644
--- a/drivers/net/wireless/broadcom/b43/Kconfig
+++ b/drivers/net/wireless/broadcom/b43/Kconfig
@@ -6,7 +6,7 @@ config B43
select SSB if B43_SSB
select FW_LOADER
select CORDIC
- ---help---
+ help
b43 is a driver for the Broadcom 43xx series wireless devices.
Check "lspci" for something like
@@ -77,7 +77,7 @@ config B43_SDIO
bool "Broadcom 43xx SDIO device support"
depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE
select SSB_SDIOHOST
- ---help---
+ help
Broadcom 43xx device support for Soft-MAC SDIO devices.
With this config option you can drive Soft-MAC b43 cards with a
@@ -108,7 +108,7 @@ config B43_PHY_G
bool "Support for G-PHY (802.11g) devices"
depends on B43 && B43_SSB
default y
- ---help---
+ help
This PHY type can be found in the following chipsets:
PCI: BCM4306, BCM4311, BCM4318
SoC: BCM4712, BCM5352E
@@ -117,7 +117,7 @@ config B43_PHY_N
bool "Support for N-PHY (the main 802.11n series) devices"
depends on B43
default y
- ---help---
+ help
This PHY type can be found in the following chipsets:
PCI: BCM4321, BCM4322,
BCM43222, BCM43224, BCM43225,
@@ -128,7 +128,7 @@ config B43_PHY_LP
bool "Support for LP-PHY (low-power 802.11g) devices"
depends on B43 && B43_SSB
default y
- ---help---
+ help
The LP-PHY is a low-power PHY built into some notebooks
and embedded devices. It supports 802.11a/b/g
(802.11a support is optional, and currently disabled).
@@ -137,13 +137,13 @@ config B43_PHY_HT
bool "Support for HT-PHY (high throughput 802.11n) devices"
depends on B43 && B43_BCMA
default y
- ---help---
+ help
This PHY type with 3x3:3 MIMO can be found in the BCM4331 PCI chipset.
config B43_PHY_LCN
bool "Support for LCN-PHY devices (BROKEN)"
depends on B43 && BROKEN
- ---help---
+ help
Support for the LCN-PHY.
Say N, this is BROKEN and crashes driver.
@@ -151,7 +151,7 @@ config B43_PHY_LCN
config B43_PHY_AC
bool "Support for AC-PHY (802.11ac) devices (BROKEN)"
depends on B43 && B43_BCMA && BROKEN
- ---help---
+ help
This PHY type can be found in the following chipsets:
PCI: BCM4352, BCM4360
@@ -174,7 +174,7 @@ config B43_HWRNG
config B43_DEBUG
bool "Broadcom 43xx debugging"
depends on B43
- ---help---
+ help
Broadcom 43xx debugging.
This adds additional runtime sanity checks and statistics to the driver.
diff --git a/drivers/net/wireless/broadcom/b43legacy/Kconfig b/drivers/net/wireless/broadcom/b43legacy/Kconfig
index bfac34142ab5..e4da34ec4f5b 100644
--- a/drivers/net/wireless/broadcom/b43legacy/Kconfig
+++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig
@@ -4,7 +4,7 @@ config B43LEGACY
depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
select SSB
select FW_LOADER
- ---help---
+ help
b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the
Linksys WPC54G V1 PCMCIA devices.
@@ -54,7 +54,7 @@ config B43LEGACY_DEBUG
bool "Broadcom 43xx-legacy debugging"
depends on B43LEGACY
default y
- ---help---
+ help
Say Y, because this information will help you get the driver running.
This option generates a minimum of log output.
@@ -75,7 +75,7 @@ config B43LEGACY_DMA_AND_PIO_MODE
bool "DMA + PIO"
select B43LEGACY_DMA
select B43LEGACY_PIO
- ---help---
+ help
Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
data transfer modes. The mode actually used is selectable through
the module parameter "pio". With pio=0 as a module parameter, the
@@ -86,14 +86,14 @@ config B43LEGACY_DMA_AND_PIO_MODE
config B43LEGACY_DMA_MODE
bool "DMA (Direct Memory Access) only"
select B43LEGACY_DMA
- ---help---
+ help
Only include Direct Memory Access (DMA).
This reduces the size of the driver module, by omitting the PIO code.
config B43LEGACY_PIO_MODE
bool "PIO (Programmed I/O) only"
select B43LEGACY_PIO
- ---help---
+ help
Only include Programmed I/O (PIO).
This reduces the size of the driver module, by omitting the DMA code.
Please note that PIO transfers are slow (compared to DMA).
diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index a5bf16c4f495..5bf2318763c5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -12,7 +12,7 @@ config BRCMSMAC
select BRCMUTIL
select FW_LOADER
select CORDIC
- ---help---
+ help
This module adds support for PCIe wireless adapters based on Broadcom
IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will
be available if you select BCMA_DRIVER_GPIO. If you choose to build a
@@ -23,7 +23,7 @@ source "drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig"
config BRCM_TRACING
bool "Broadcom device tracing"
depends on BRCMSMAC || BRCMFMAC
- ---help---
+ help
If you say Y here, the Broadcom wireless drivers will register
with ftrace to dump event information into the trace ringbuffer.
Tracing can be enabled at runtime to aid in debugging wireless
@@ -35,5 +35,5 @@ config BRCMDBG
bool "Broadcom driver debug functions"
depends on BRCMSMAC || BRCMFMAC
select WANT_DEV_COREDUMP if BRCMFMAC
- ---help---
+ help
Selecting this enables additional code for debug purposes.
diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig
index 7a3b3bb2ce15..681bfc2d740a 100644
--- a/drivers/net/wireless/cisco/Kconfig
+++ b/drivers/net/wireless/cisco/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_CISCO
bool "Cisco devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config AIRO
select CRYPTO_SKCIPHER
select WEXT_SPY
select WEXT_PRIV
- ---help---
+ help
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
@@ -42,7 +42,7 @@ config AIRO_CS
select CRYPTO
select CRYPTO_AES
select CRYPTO_CTR
- ---help---
+ help
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
driver part of the Linux Pcmcia package.
diff --git a/drivers/net/wireless/intel/Kconfig b/drivers/net/wireless/intel/Kconfig
index 6ec42f67d0f2..3d1d7d11a396 100644
--- a/drivers/net/wireless/intel/Kconfig
+++ b/drivers/net/wireless/intel/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_INTEL
bool "Intel devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/intel/ipw2x00/Kconfig b/drivers/net/wireless/intel/ipw2x00/Kconfig
index f42b3cdce611..d00386915a9d 100644
--- a/drivers/net/wireless/intel/ipw2x00/Kconfig
+++ b/drivers/net/wireless/intel/ipw2x00/Kconfig
@@ -12,7 +12,7 @@ config IPW2100
select FW_LOADER
select LIB80211
select LIBIPW
- ---help---
+ help
A driver for the Intel PRO/Wireless 2100 Network
Connection 802.11b wireless network adapter.
@@ -41,7 +41,7 @@ config IPW2100
config IPW2100_MONITOR
bool "Enable promiscuous mode"
depends on IPW2100
- ---help---
+ help
Enables promiscuous/monitor mode support for the ipw2100 driver.
With this feature compiled into the driver, you can switch to
promiscuous mode via the Wireless Tool's Monitor mode. While in this
@@ -50,7 +50,7 @@ config IPW2100_MONITOR
config IPW2100_DEBUG
bool "Enable full debugging output in IPW2100 module."
depends on IPW2100
- ---help---
+ help
This option will enable debug tracing output for the IPW2100.
This will result in the kernel module being ~60k larger. You can
@@ -74,7 +74,7 @@ config IPW2200
select FW_LOADER
select LIB80211
select LIBIPW
- ---help---
+ help
A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
Connection adapters.
@@ -103,7 +103,7 @@ config IPW2200
config IPW2200_MONITOR
bool "Enable promiscuous mode"
depends on IPW2200
- ---help---
+ help
Enables promiscuous/monitor mode support for the ipw2200 driver.
With this feature compiled into the driver, you can switch to
promiscuous mode via the Wireless Tool's Monitor mode. While in this
@@ -117,7 +117,7 @@ config IPW2200_PROMISCUOUS
bool "Enable creation of a RF radiotap promiscuous interface"
depends on IPW2200_MONITOR
select IPW2200_RADIOTAP
- ---help---
+ help
Enables the creation of a second interface prefixed 'rtap'.
This second interface will provide every received in radiotap
format.
@@ -144,7 +144,7 @@ config IPW2200_QOS
config IPW2200_DEBUG
bool "Enable full debugging output in IPW2200 module."
depends on IPW2200
- ---help---
+ help
This option will enable low level debug tracing output for IPW2200.
Note, normal debug code is already compiled in. This low level
@@ -170,7 +170,7 @@ config LIBIPW
select LIB80211_CRYPT_WEP
select LIB80211_CRYPT_TKIP
select LIB80211_CRYPT_CCMP
- ---help---
+ help
This option enables the hardware independent IEEE 802.11
networking stack. This component is deprecated in favor of the
mac80211 component.
@@ -178,7 +178,7 @@ config LIBIPW
config LIBIPW_DEBUG
bool "Full debugging output for the LIBIPW component"
depends on LIBIPW
- ---help---
+ help
This option will enable debug tracing output for the
libipw component.
diff --git a/drivers/net/wireless/intel/iwlegacy/Kconfig b/drivers/net/wireless/intel/iwlegacy/Kconfig
index 100f55858b13..24fe3f63c321 100644
--- a/drivers/net/wireless/intel/iwlegacy/Kconfig
+++ b/drivers/net/wireless/intel/iwlegacy/Kconfig
@@ -11,7 +11,7 @@ config IWL4965
tristate "Intel Wireless WiFi 4965AGN (iwl4965)"
depends on PCI && MAC80211
select IWLEGACY
- ---help---
+ help
This option enables support for
Select to build the driver supporting the:
@@ -39,7 +39,7 @@ config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
depends on PCI && MAC80211
select IWLEGACY
- ---help---
+ help
Select to build the driver supporting the:
Intel PRO/Wireless 3945ABG/BG Network Connection
@@ -67,7 +67,7 @@ menu "iwl3945 / iwl4965 Debugging Options"
config IWLEGACY_DEBUG
bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers"
depends on IWLEGACY
- ---help---
+ help
This option will enable debug tracing output for the iwlegacy
drivers.
@@ -93,7 +93,7 @@ config IWLEGACY_DEBUG
config IWLEGACY_DEBUGFS
bool "iwlegacy (iwl 3945/4965) debugfs support"
depends on IWLEGACY && MAC80211_DEBUGFS
- ---help---
+ help
Enable creation of debugfs files for the iwlegacy drivers. This
is a low-impact option that allows getting insight into the
driver's state at runtime.
diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig
index 091d621ad25f..36153fa5f96a 100644
--- a/drivers/net/wireless/intel/iwlwifi/Kconfig
+++ b/drivers/net/wireless/intel/iwlwifi/Kconfig
@@ -3,7 +3,7 @@ config IWLWIFI
tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) "
depends on PCI && HAS_IOMEM && CFG80211
select FW_LOADER
- ---help---
+ help
Select to build the driver supporting the:
Intel Wireless WiFi Link Next-Gen AGN
@@ -96,7 +96,7 @@ menu "Debugging Options"
config IWLWIFI_DEBUG
bool "Enable full debugging output in the iwlwifi driver"
- ---help---
+ help
This option will enable debug tracing output for the iwlwifi drivers
This will result in the kernel module being ~100k larger. You can
@@ -121,7 +121,7 @@ config IWLWIFI_DEBUG
config IWLWIFI_DEBUGFS
bool "iwlwifi debugfs support"
depends on MAC80211_DEBUGFS
- ---help---
+ help
Enable creation of debugfs files for the iwlwifi drivers. This
is a low-impact option that allows getting insight into the
driver's state at runtime.
diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig
index 4e968912e27c..6a6ce9d4aeee 100644
--- a/drivers/net/wireless/intersil/Kconfig
+++ b/drivers/net/wireless/intersil/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_INTERSIL
bool "Intersil devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config PRISM54
select WEXT_SPY
select WEXT_PRIV
select FW_LOADER
- ---help---
+ help
This enables support for FullMAC PCI/Cardbus prism54 devices. This
driver is now deprecated in favor for the SoftMAC driver, p54pci.
p54pci supports FullMAC PCI/Cardbus devices as well.
diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig
index c70dc168dc63..6ad88299432f 100644
--- a/drivers/net/wireless/intersil/hostap/Kconfig
+++ b/drivers/net/wireless/intersil/hostap/Kconfig
@@ -15,7 +15,7 @@ config HOSTAP
select LIB80211_CRYPT_WEP
select LIB80211_CRYPT_TKIP
select LIB80211_CRYPT_CCMP
- ---help---
+ help
Shared driver code for IEEE 802.11b wireless cards based on
Intersil Prism2/2.5/3 chipset. This driver supports so called
Host AP mode that allows the card to act as an IEEE 802.11
@@ -36,7 +36,7 @@ config HOSTAP
config HOSTAP_FIRMWARE
bool "Support downloading firmware images with Host AP driver"
depends on HOSTAP
- ---help---
+ help
Configure Host AP driver to include support for firmware image
download. This option by itself only enables downloading to the
volatile memory, i.e. the card RAM. This option is required to
@@ -49,7 +49,7 @@ config HOSTAP_FIRMWARE
config HOSTAP_FIRMWARE_NVRAM
bool "Support for non-volatile firmware download"
depends on HOSTAP_FIRMWARE
- ---help---
+ help
Allow Host AP driver to write firmware images to the non-volatile
card memory, i.e. flash memory that survives power cycling.
Enable this option if you want to be able to change card firmware
@@ -61,7 +61,7 @@ config HOSTAP_FIRMWARE_NVRAM
config HOSTAP_PLX
tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
depends on PCI && HOSTAP
- ---help---
+ help
Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
PCI adaptors.
@@ -75,7 +75,7 @@ config HOSTAP_PLX
config HOSTAP_PCI
tristate "Host AP driver for Prism2.5 PCI adaptors"
depends on PCI && HOSTAP
- ---help---
+ help
Host AP driver's version for Prism2.5 PCI adaptors.
"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
@@ -88,7 +88,7 @@ config HOSTAP_PCI
config HOSTAP_CS
tristate "Host AP driver for Prism2/2.5/3 PC Cards"
depends on PCMCIA && HOSTAP
- ---help---
+ help
Host AP driver's version for Prism2/2.5/3 PC Cards.
"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig
index c430d7a46730..c470ee23673f 100644
--- a/drivers/net/wireless/intersil/orinoco/Kconfig
+++ b/drivers/net/wireless/intersil/orinoco/Kconfig
@@ -10,7 +10,7 @@ config HERMES
select FW_LOADER
select CRYPTO
select CRYPTO_MICHAEL_MIC
- ---help---
+ help
A driver for 802.11b wireless cards based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
@@ -32,7 +32,7 @@ config HERMES
config HERMES_PRISM
bool "Support Prism 2/2.5 chipset"
depends on HERMES
- ---help---
+ help
Say Y to enable support for Prism 2 and 2.5 chipsets. These
chipsets are better handled by the hostap driver. This driver
@@ -44,7 +44,7 @@ config HERMES_CACHE_FW_ON_INIT
bool "Cache Hermes firmware on driver initialisation"
depends on HERMES
default y
- ---help---
+ help
Say Y to cache any firmware required by the Hermes drivers
on startup. The firmware will remain cached until the
driver is unloaded. The cache uses 64K of RAM.
@@ -110,7 +110,7 @@ config PCI_HERMES
config PCMCIA_HERMES
tristate "Hermes PCMCIA card support"
depends on PCMCIA && HERMES && HAS_IOPORT_MAP
- ---help---
+ help
A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
@@ -125,7 +125,7 @@ config PCMCIA_HERMES
config PCMCIA_SPECTRUM
tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
depends on PCMCIA && HERMES && HAS_IOPORT_MAP
- ---help---
+ help
This is a driver for 802.11b cards using RAM-loadable Symbol
firmware, such as Symbol Wireless Networker LA4100, CompactFlash
@@ -139,5 +139,5 @@ config ORINOCO_USB
tristate "Agere Orinoco USB support"
depends on USB && HERMES
select FW_LOADER
- ---help---
+ help
This driver is for USB versions of the Agere Orinoco card.
diff --git a/drivers/net/wireless/intersil/p54/Kconfig b/drivers/net/wireless/intersil/p54/Kconfig
index 26cd80732afa..024be5507daf 100644
--- a/drivers/net/wireless/intersil/p54/Kconfig
+++ b/drivers/net/wireless/intersil/p54/Kconfig
@@ -4,7 +4,7 @@ config P54_COMMON
depends on MAC80211
select FW_LOADER
select CRC_CCITT
- ---help---
+ help
This is common code for isl38xx/stlc45xx based modules.
This module does nothing by itself - the USB/PCI/SPI front-ends
also need to be enabled in order to support any devices.
@@ -18,7 +18,7 @@ config P54_USB
tristate "Prism54 USB support"
depends on P54_COMMON && USB
select CRC32
- ---help---
+ help
This driver is for USB isl38xx based wireless cards.
These devices require softmac firmware which can be found at
@@ -29,7 +29,7 @@ config P54_USB
config P54_PCI
tristate "Prism54 PCI support"
depends on P54_COMMON && PCI
- ---help---
+ help
This driver is for PCI isl38xx based wireless cards.
This driver supports most devices that are supported by the
fullmac prism54 driver plus many devices which are not
@@ -43,7 +43,7 @@ config P54_PCI
config P54_SPI
tristate "Prism54 SPI (stlc45xx) support"
depends on P54_COMMON && SPI_MASTER
- ---help---
+ help
This driver is for stlc4550 or stlc4560 based wireless chips
such as Nokia's N800/N810 Portable Internet Tablet.
@@ -53,7 +53,7 @@ config P54_SPI_DEFAULT_EEPROM
bool "Include fallback EEPROM blob"
depends on P54_SPI
default n
- ---help---
+ help
Unlike the PCI or USB devices, the SPI variants don't have
a dedicated EEPROM chip to store all device specific values
for calibration, country and interface settings.
diff --git a/drivers/net/wireless/marvell/Kconfig b/drivers/net/wireless/marvell/Kconfig
index dff82fdbea78..864bc0f6d4d4 100644
--- a/drivers/net/wireless/marvell/Kconfig
+++ b/drivers/net/wireless/marvell/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_MARVELL
bool "Marvell devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -19,7 +19,7 @@ source "drivers/net/wireless/marvell/mwifiex/Kconfig"
config MWL8K
tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
depends on MAC80211 && PCI
- ---help---
+ help
This driver supports Marvell TOPDOG 802.11 wireless cards.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/net/wireless/marvell/libertas/Kconfig b/drivers/net/wireless/marvell/libertas/Kconfig
index b9fe598130c3..6d62ab49aa8d 100644
--- a/drivers/net/wireless/marvell/libertas/Kconfig
+++ b/drivers/net/wireless/marvell/libertas/Kconfig
@@ -6,37 +6,37 @@ config LIBERTAS
select WEXT_SPY
select LIB80211
select FW_LOADER
- ---help---
+ help
A library for Marvell Libertas 8xxx devices.
config LIBERTAS_USB
tristate "Marvell Libertas 8388 USB 802.11b/g cards"
depends on LIBERTAS && USB
- ---help---
+ help
A driver for Marvell Libertas 8388 USB devices.
config LIBERTAS_CS
tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
depends on LIBERTAS && PCMCIA && HAS_IOPORT_MAP
- ---help---
+ help
A driver for Marvell Libertas 8385 CompactFlash devices.
config LIBERTAS_SDIO
tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
depends on LIBERTAS && MMC
- ---help---
+ help
A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
config LIBERTAS_SPI
tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
depends on LIBERTAS && SPI
- ---help---
+ help
A driver for Marvell Libertas 8686 SPI devices.
config LIBERTAS_DEBUG
bool "Enable full debugging output in the Libertas module."
depends on LIBERTAS
- ---help---
+ help
Debugging support.
config LIBERTAS_MESH
diff --git a/drivers/net/wireless/marvell/libertas_tf/Kconfig b/drivers/net/wireless/marvell/libertas_tf/Kconfig
index aa40d65f611a..345da4a6ee8d 100644
--- a/drivers/net/wireless/marvell/libertas_tf/Kconfig
+++ b/drivers/net/wireless/marvell/libertas_tf/Kconfig
@@ -3,17 +3,17 @@ config LIBERTAS_THINFIRM
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
depends on MAC80211
select FW_LOADER
- ---help---
+ help
A library for Marvell Libertas 8xxx devices using thinfirm.
config LIBERTAS_THINFIRM_DEBUG
bool "Enable full debugging output in the Libertas thin firmware module."
depends on LIBERTAS_THINFIRM
- ---help---
+ help
Debugging support.
config LIBERTAS_THINFIRM_USB
tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
depends on LIBERTAS_THINFIRM && USB
- ---help---
+ help
A driver for Marvell Libertas 8388 USB devices using thinfirm.
diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig
index 64d8a11ad1e7..2b4ff2b78a7e 100644
--- a/drivers/net/wireless/marvell/mwifiex/Kconfig
+++ b/drivers/net/wireless/marvell/mwifiex/Kconfig
@@ -2,7 +2,7 @@
config MWIFIEX
tristate "Marvell WiFi-Ex Driver"
depends on CFG80211
- ---help---
+ help
This adds support for wireless adapters based on Marvell
802.11n/ac chipsets.
@@ -14,7 +14,7 @@ config MWIFIEX_SDIO
depends on MWIFIEX && MMC
select FW_LOADER
select WANT_DEV_COREDUMP
- ---help---
+ help
This adds support for wireless adapters based on Marvell
8786/8787/8797/8887/8897/8977/8987/8997 chipsets with SDIO interface.
@@ -26,7 +26,7 @@ config MWIFIEX_PCIE
depends on MWIFIEX && PCI
select FW_LOADER
select WANT_DEV_COREDUMP
- ---help---
+ help
This adds support for wireless adapters based on Marvell
8766/8897/8997 chipsets with PCIe interface.
@@ -37,7 +37,7 @@ config MWIFIEX_USB
tristate "Marvell WiFi-Ex Driver for USB8766/8797/8997"
depends on MWIFIEX && USB
select FW_LOADER
- ---help---
+ help
This adds support for wireless adapters based on Marvell
8797/8997 chipset with USB interface.
diff --git a/drivers/net/wireless/mediatek/Kconfig b/drivers/net/wireless/mediatek/Kconfig
index 02d1120f148f..bd4db128248e 100644
--- a/drivers/net/wireless/mediatek/Kconfig
+++ b/drivers/net/wireless/mediatek/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_MEDIATEK
bool "MediaTek devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/mediatek/mt7601u/Kconfig b/drivers/net/wireless/mediatek/mt7601u/Kconfig
index 0b230f303d53..4a8b96280670 100644
--- a/drivers/net/wireless/mediatek/mt7601u/Kconfig
+++ b/drivers/net/wireless/mediatek/mt7601u/Kconfig
@@ -3,5 +3,5 @@ config MT7601U
tristate "MediaTek MT7601U (USB) support"
depends on MAC80211
depends on USB
- ---help---
+ help
This adds support for MT7601U-based wireless USB dongles.
diff --git a/drivers/net/wireless/ralink/Kconfig b/drivers/net/wireless/ralink/Kconfig
index 92eec8fff8fd..135a191c435d 100644
--- a/drivers/net/wireless/ralink/Kconfig
+++ b/drivers/net/wireless/ralink/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_RALINK
bool "Ralink devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/ralink/rt2x00/Kconfig b/drivers/net/wireless/ralink/rt2x00/Kconfig
index d4969d617822..dcccc290a7f5 100644
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -2,7 +2,7 @@
menuconfig RT2X00
tristate "Ralink driver support"
depends on MAC80211 && HAS_DMA
- ---help---
+ help
This will enable the support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
@@ -24,7 +24,7 @@ config RT2400PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
- ---help---
+ help
This adds support for rt2400 wireless chipset family.
Supported chips: RT2460.
@@ -36,7 +36,7 @@ config RT2500PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
- ---help---
+ help
This adds support for rt2500 wireless chipset family.
Supported chips: RT2560.
@@ -51,7 +51,7 @@ config RT61PCI
select RT2X00_LIB_CRYPTO
select CRC_ITU_T
select EEPROM_93CX6
- ---help---
+ help
This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661.
@@ -68,7 +68,7 @@ config RT2800PCI
select RT2X00_LIB_CRYPTO
select CRC_CCITT
select EEPROM_93CX6
- ---help---
+ help
This adds support for rt27xx/rt28xx/rt30xx wireless chipset family.
Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890, RT3052,
RT3090, RT3091 & RT3092
@@ -80,7 +80,7 @@ if RT2800PCI
config RT2800PCI_RT33XX
bool "rt2800pci - Include support for rt33xx devices"
default y
- ---help---
+ help
This adds support for rt33xx wireless chipset family to the
rt2800pci driver.
Supported chips: RT3390
@@ -88,7 +88,7 @@ config RT2800PCI_RT33XX
config RT2800PCI_RT35XX
bool "rt2800pci - Include support for rt35xx devices (EXPERIMENTAL)"
default y
- ---help---
+ help
This adds support for rt35xx wireless chipset family to the
rt2800pci driver.
Supported chips: RT3060, RT3062, RT3562, RT3592
@@ -97,7 +97,7 @@ config RT2800PCI_RT35XX
config RT2800PCI_RT53XX
bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)"
default y
- ---help---
+ help
This adds support for rt53xx wireless chipset family to the
rt2800pci driver.
Supported chips: RT5390
@@ -105,7 +105,7 @@ config RT2800PCI_RT53XX
config RT2800PCI_RT3290
bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)"
default y
- ---help---
+ help
This adds support for rt3290 wireless chipset family to the
rt2800pci driver.
Supported chips: RT3290
@@ -116,7 +116,7 @@ config RT2500USB
depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_CRYPTO
- ---help---
+ help
This adds support for rt2500 wireless chipset family.
Supported chips: RT2571 & RT2572.
@@ -129,7 +129,7 @@ config RT73USB
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_ITU_T
- ---help---
+ help
This adds support for rt2501 wireless chipset family.
Supported chips: RT2571W, RT2573 & RT2671.
@@ -143,7 +143,7 @@ config RT2800USB
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
- ---help---
+ help
This adds support for rt27xx/rt28xx/rt30xx wireless chipset family.
Supported chips: RT2770, RT2870 & RT3070, RT3071 & RT3072
@@ -154,7 +154,7 @@ if RT2800USB
config RT2800USB_RT33XX
bool "rt2800usb - Include support for rt33xx devices"
default y
- ---help---
+ help
This adds support for rt33xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT3370
@@ -162,27 +162,27 @@ config RT2800USB_RT33XX
config RT2800USB_RT35XX
bool "rt2800usb - Include support for rt35xx devices (EXPERIMENTAL)"
default y
- ---help---
+ help
This adds support for rt35xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT3572
config RT2800USB_RT3573
bool "rt2800usb - Include support for rt3573 devices (EXPERIMENTAL)"
- ---help---
+ help
This enables support for RT3573 chipset based wireless USB devices
in the rt2800usb driver.
config RT2800USB_RT53XX
bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
- ---help---
+ help
This adds support for rt53xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT5370
config RT2800USB_RT55XX
bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)"
- ---help---
+ help
This adds support for rt55xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT5572
@@ -190,7 +190,7 @@ config RT2800USB_RT55XX
config RT2800USB_UNKNOWN
bool "rt2800usb - Include support for unknown (USB) devices"
default n
- ---help---
+ help
This adds support for rt2800usb devices that are known to
have a rt28xx family compatible chipset, but for which the exact
chipset is unknown.
@@ -209,7 +209,7 @@ config RT2800SOC
select RT2X00_LIB_FIRMWARE
select RT2800_LIB
select RT2800_LIB_MMIO
- ---help---
+ help
This adds support for Ralink WiSoC devices.
Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352.
@@ -256,7 +256,7 @@ config RT2X00_LIB_LEDS
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
depends on RT2X00_LIB && MAC80211_DEBUGFS
- ---help---
+ help
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
most important register types of the rt2x00 hardware.
@@ -264,7 +264,7 @@ config RT2X00_LIB_DEBUGFS
config RT2X00_DEBUG
bool "Ralink debug output"
depends on RT2X00_LIB
- ---help---
+ help
Enable debugging output for all rt2x00 modules
endif
diff --git a/drivers/net/wireless/realtek/Kconfig b/drivers/net/wireless/realtek/Kconfig
index 8ea2d8d7e356..474843277fa1 100644
--- a/drivers/net/wireless/realtek/Kconfig
+++ b/drivers/net/wireless/realtek/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_REALTEK
bool "Realtek devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/realtek/rtl818x/Kconfig b/drivers/net/wireless/realtek/rtl818x/Kconfig
index e1aa3fc71e66..603812c9a43e 100644
--- a/drivers/net/wireless/realtek/rtl818x/Kconfig
+++ b/drivers/net/wireless/realtek/rtl818x/Kconfig
@@ -6,7 +6,7 @@ config RTL8180
tristate "Realtek 8180/8185/8187SE PCI support"
depends on MAC80211 && PCI
select EEPROM_93CX6
- ---help---
+ help
This is a driver for RTL8180, RTL8185 and RTL8187SE based cards.
These are PCI based chips found in cards such as:
@@ -62,7 +62,7 @@ config RTL8187
tristate "Realtek 8187 and 8187B USB support"
depends on MAC80211 && USB
select EEPROM_93CX6
- ---help---
+ help
This is a driver for RTL8187 and RTL8187B based cards.
These are USB based chips found in devices such as:
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Kconfig b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
index 32d151cde618..a263507a77a6 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
+++ b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
@@ -5,7 +5,7 @@
config RTL8XXXU
tristate "RTL8723AU/RTL8188[CR]U/RTL819[12]CU (mac80211) support"
depends on MAC80211 && USB
- ---help---
+ help
This is an alternative driver for various Realtek RTL8XXX
parts written to utilize the Linux mac80211 stack.
The driver is known to work with a number of RTL8723AU,
@@ -27,7 +27,7 @@ config RTL8XXXU
config RTL8XXXU_UNTESTED
bool "Include support for untested Realtek 8xxx USB devices (EXPERIMENTAL)"
depends on RTL8XXXU
- ---help---
+ help
This option enables detection of Realtek 8723/8188/8191/8192 WiFi
USB devices which have not been tested directly by the driver
author or reported to be working by third parties.
diff --git a/drivers/net/wireless/realtek/rtlwifi/Kconfig b/drivers/net/wireless/realtek/rtlwifi/Kconfig
index 28c247f7f6f8..9f6a4e35543c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/Kconfig
+++ b/drivers/net/wireless/realtek/rtlwifi/Kconfig
@@ -3,7 +3,7 @@ menuconfig RTL_CARDS
tristate "Realtek rtlwifi family of devices"
depends on MAC80211 && (PCI || USB)
default y
- ---help---
+ help
This option will enable support for the Realtek mac80211-based
wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
rtl8723ae, rtl8723be, rtl8188ee, rtl8192ee, and rtl8821ae share
@@ -17,7 +17,7 @@ config RTL8192CE
select RTL8192C_COMMON
select RTLWIFI
select RTLWIFI_PCI
- ---help---
+ help
This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
wireless network adapters.
@@ -28,7 +28,7 @@ config RTL8192SE
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
- ---help---
+ help
This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
wireless network adapters.
@@ -39,7 +39,7 @@ config RTL8192DE
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
- ---help---
+ help
This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
wireless network adapters.
@@ -52,7 +52,7 @@ config RTL8723AE
select RTLWIFI_PCI
select RTL8723_COMMON
select RTLBTCOEXIST
- ---help---
+ help
This is the driver for Realtek RTL8723AE 802.11n PCIe
wireless network adapters.
@@ -65,7 +65,7 @@ config RTL8723BE
select RTLWIFI_PCI
select RTL8723_COMMON
select RTLBTCOEXIST
- ---help---
+ help
This is the driver for Realtek RTL8723BE 802.11n PCIe
wireless network adapters.
@@ -76,7 +76,7 @@ config RTL8188EE
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
- ---help---
+ help
This is the driver for Realtek RTL8188EE 802.11n PCIe
wireless network adapters.
@@ -88,7 +88,7 @@ config RTL8192EE
select RTLWIFI
select RTLWIFI_PCI
select RTLBTCOEXIST
- ---help---
+ help
This is the driver for Realtek RTL8192EE 802.11n PCIe
wireless network adapters.
@@ -100,7 +100,7 @@ config RTL8821AE
select RTLWIFI
select RTLWIFI_PCI
select RTLBTCOEXIST
- ---help---
+ help
This is the driver for Realtek RTL8821AE/RTL8812AE 802.11ac PCIe
wireless network adapters.
@@ -112,7 +112,7 @@ config RTL8192CU
select RTLWIFI
select RTLWIFI_USB
select RTL8192C_COMMON
- ---help---
+ help
This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
wireless network adapters.
@@ -132,7 +132,7 @@ config RTLWIFI_DEBUG
bool "Debugging output for rtlwifi driver family"
depends on RTLWIFI
default y
- ---help---
+ help
To use the module option that sets the dynamic-debugging level for,
the front-end driver, this parameter must be "Y". For memory-limited
systems, choose "N". If in doubt, choose "Y".
diff --git a/drivers/net/wireless/rsi/Kconfig b/drivers/net/wireless/rsi/Kconfig
index ad5d34350cf9..09a592409204 100644
--- a/drivers/net/wireless/rsi/Kconfig
+++ b/drivers/net/wireless/rsi/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_RSI
bool "Redpine Signals Inc devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -16,7 +16,7 @@ config RSI_91X
tristate "Redpine Signals Inc 91x WLAN driver support"
select BT_HCIRSI if RSI_COEX
depends on MAC80211
- ---help---
+ help
This option enabes support for RSI 1x1 devices.
Select M (recommended), if you have a RSI 1x1 wireless module.
@@ -24,7 +24,7 @@ config RSI_DEBUGFS
bool "Redpine Signals Inc debug support"
depends on RSI_91X
default y
- ---help---
+ help
Say Y, if you would like to enable debug support. This option
creates debugfs entries
@@ -32,7 +32,7 @@ config RSI_SDIO
tristate "Redpine Signals SDIO bus support"
depends on MMC && RSI_91X
default m
- ---help---
+ help
This option enables the SDIO bus support in rsi drivers.
Select M (recommended), if you have a RSI 1x1 wireless module.
@@ -40,7 +40,7 @@ config RSI_USB
tristate "Redpine Signals USB bus support"
depends on USB && RSI_91X
default m
- ---help---
+ help
This option enables the USB bus support in rsi drivers.
Select M (recommended), if you have a RSI 1x1 wireless module.
@@ -49,7 +49,7 @@ config RSI_COEX
depends on BT && RSI_91X
depends on !(BT=m && RSI_91X=y)
default y
- ---help---
+ help
This option enables the WLAN BT coex support in rsi drivers.
Select M (recommended), if you have want to use this feature
and you have RS9113 module.
diff --git a/drivers/net/wireless/st/Kconfig b/drivers/net/wireless/st/Kconfig
index 441d1b8e7b80..cd647a533d0e 100644
--- a/drivers/net/wireless/st/Kconfig
+++ b/drivers/net/wireless/st/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_ST
bool "STMicroelectronics devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig
index b81f2e41a63a..7c0b17a76fe2 100644
--- a/drivers/net/wireless/ti/Kconfig
+++ b/drivers/net/wireless/ti/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_TI
bool "Texas Instrument devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config WILINK_PLATFORM_DATA
bool "TI WiLink platform data"
depends on WLCORE_SDIO || WL1251_SDIO
default y
- ---help---
+ help
Small platform data bit needed to pass data to the sdio modules.
diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig
index 7d39f0a4ba5b..de1c70e10cda 100644
--- a/drivers/net/wireless/ti/wl1251/Kconfig
+++ b/drivers/net/wireless/ti/wl1251/Kconfig
@@ -4,7 +4,7 @@ config WL1251
depends on MAC80211
select FW_LOADER
select CRC7
- ---help---
+ help
This will enable TI wl1251 driver support. The drivers make
use of the mac80211 stack.
@@ -14,7 +14,7 @@ config WL1251
config WL1251_SPI
tristate "TI wl1251 SPI support"
depends on WL1251 && SPI_MASTER
- ---help---
+ help
This module adds support for the SPI interface of adapters using
TI wl1251 chipset. Select this if your platform is using
the SPI bus.
@@ -25,7 +25,7 @@ config WL1251_SPI
config WL1251_SDIO
tristate "TI wl1251 SDIO support"
depends on WL1251 && MMC
- ---help---
+ help
This module adds support for the SDIO interface of adapters using
TI wl1251 chipset. Select this if your platform is using
the SDIO bus.
diff --git a/drivers/net/wireless/ti/wl12xx/Kconfig b/drivers/net/wireless/ti/wl12xx/Kconfig
index 9c4511604b67..786fff288505 100644
--- a/drivers/net/wireless/ti/wl12xx/Kconfig
+++ b/drivers/net/wireless/ti/wl12xx/Kconfig
@@ -3,7 +3,7 @@ config WL12XX
tristate "TI wl12xx support"
depends on MAC80211
select WLCORE
- ---help---
+ help
This module adds support for wireless adapters based on TI wl1271,
wl1273, wl1281 and wl1283 chipsets. This module does *not* include
support for wl1251. For wl1251 support, use the separate homonymous
diff --git a/drivers/net/wireless/ti/wl18xx/Kconfig b/drivers/net/wireless/ti/wl18xx/Kconfig
index e29aa2a3ba8a..98fe188dfb41 100644
--- a/drivers/net/wireless/ti/wl18xx/Kconfig
+++ b/drivers/net/wireless/ti/wl18xx/Kconfig
@@ -3,6 +3,6 @@ config WL18XX
tristate "TI wl18xx support"
depends on MAC80211
select WLCORE
- ---help---
+ help
This module adds support for wireless adapters based on TI
WiLink 8 chipsets.
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index a9db1288221c..8094323256fb 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -3,7 +3,7 @@ config WLCORE
tristate "TI wlcore support"
depends on MAC80211
select FW_LOADER
- ---help---
+ help
This module contains the main code for TI WLAN chips. It abstracts
hardware-specific differences among different chipset families.
Each chipset family needs to implement its own lower-level module
@@ -16,7 +16,7 @@ config WLCORE_SPI
tristate "TI wlcore SPI support"
depends on WLCORE && SPI_MASTER && OF
select CRC7
- ---help---
+ help
This module adds support for the SPI interface of adapters using
TI WLAN chipsets. Select this if your platform is using
the SPI bus.
@@ -27,7 +27,7 @@ config WLCORE_SPI
config WLCORE_SDIO
tristate "TI wlcore SDIO support"
depends on WLCORE && MMC
- ---help---
+ help
This module adds support for the SDIO interface of adapters using
TI WLAN chipsets. Select this if your platform is using
the SDIO bus.
diff --git a/drivers/net/wireless/zydas/Kconfig b/drivers/net/wireless/zydas/Kconfig
index 78a45cc4c014..08574433df66 100644
--- a/drivers/net/wireless/zydas/Kconfig
+++ b/drivers/net/wireless/zydas/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_ZYDAS
bool "ZyDAS devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -18,7 +18,7 @@ config USB_ZD1201
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
- ---help---
+ help
Say Y if you want to use wireless LAN adapters based on the ZyDAS
ZD1201 chip.
diff --git a/drivers/net/wireless/zydas/zd1211rw/Kconfig b/drivers/net/wireless/zydas/zd1211rw/Kconfig
index 0b7f1810f6e2..f9da8c0685d4 100644
--- a/drivers/net/wireless/zydas/zd1211rw/Kconfig
+++ b/drivers/net/wireless/zydas/zd1211rw/Kconfig
@@ -3,7 +3,7 @@ config ZD1211RW
tristate "ZyDAS ZD1211/ZD1211B USB-wireless support"
depends on USB && MAC80211
select FW_LOADER
- ---help---
+ help
This is a driver for the ZyDAS ZD1211/ZD1211B wireless
chip, present in many USB-wireless adapters.
@@ -13,7 +13,7 @@ config ZD1211RW
config ZD1211RW_DEBUG
bool "ZyDAS ZD1211 debugging"
depends on ZD1211RW
- ---help---
+ help
ZD1211 debugging messages. Choosing Y will result in additional debug
messages being saved to your kernel logs, which may help debug any
problems.