diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/Kconfig | 53 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/b43.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/main.h | 20 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/rfkill.c | 11 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/xmit.c | 27 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/xmit.h | 65 | ||||
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_plx.c | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2200.c | 15 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl3945-base.c | 18 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl4965-base.c | 18 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/if_sdio.c | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2500usb.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00pci.c | 20 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00usb.c | 28 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt61pci.c | 12 | ||||
| -rw-r--r-- | drivers/net/wireless/rtl8187_dev.c | 2 |
16 files changed, 204 insertions, 99 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 5583719a0dca..2c08c0a5a0df 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -68,7 +68,7 @@ config WAVELAN <http://www.tldp.org/docs.html#howto>. Some more specific information is contained in <file:Documentation/networking/wavelan.txt> and in the source code - <file:drivers/net/wavelan.p.h>. + <file:drivers/net/wireless/wavelan.p.h>. You will also need the wireless tools package available from <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. @@ -587,15 +587,66 @@ config ADM8211 config P54_COMMON tristate "Softmac Prism54 support" depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL + ---help--- + This is common code for isl38xx based cards. + This module does nothing by itself - the USB/PCI frontends + also need to be enabled in order to support any devices. + + These devices require softmac firmware which can be found at + http://prism54.org/ + + If you choose to build a module, it'll be called p54common. config P54_USB tristate "Prism54 USB support" depends on P54_COMMON && USB select CRC32 + ---help--- + This driver is for USB isl38xx based wireless cards. + These are USB based adapters found in devices such as: + + 3COM 3CRWE254G72 + SMC 2862W-G + Accton 802.11g WN4501 USB + Siemens Gigaset USB + Netgear WG121 + Netgear WG111 + Medion 40900, Roper Europe + Shuttle PN15, Airvast WM168g, IOGear GWU513 + Linksys WUSB54G + Linksys WUSB54G Portable + DLink DWL-G120 Spinnaker + DLink DWL-G122 + Belkin F5D7050 ver 1000 + Cohiba Proto board + SMC 2862W-G version 2 + U.S. Robotics U5 802.11g Adapter + FUJITSU E-5400 USB D1700 + Sagem XG703A + DLink DWL-G120 Cohiba + Spinnaker Proto board + Linksys WUSB54AG + Inventel UR054G + Spinnaker DUT + + These devices require softmac firmware which can be found at + http://prism54.org/ + + If you choose to build a module, it'll be called p54usb. config P54_PCI tristate "Prism54 PCI support" depends on P54_COMMON && PCI + ---help--- + This driver is for PCI isl38xx based wireless cards. + This driver supports most devices that are supported by the + fullmac prism54 driver plus many devices which are not + supported by the fullmac driver/firmware. + + This driver requires softmac firmware which can be found at + http://prism54.org/ + + If you choose to build a module, it'll be called p54pci. source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index a28ad230d63e..7b6fc1ab2b90 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -273,6 +273,8 @@ enum { #define B43_PHYTYPE_A 0x00 #define B43_PHYTYPE_B 0x01 #define B43_PHYTYPE_G 0x02 +#define B43_PHYTYPE_N 0x04 +#define B43_PHYTYPE_LP 0x05 /* PHYRegisters */ #define B43_PHY_ILT_A_CTRL 0x0072 diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h index 284d17da17d1..08e2e56e48f4 100644 --- a/drivers/net/wireless/b43/main.h +++ b/drivers/net/wireless/b43/main.h @@ -39,11 +39,11 @@ #define PAD_BYTES(nr_bytes) P4D_BYTES( __LINE__ , (nr_bytes)) /* Lightweight function to convert a frequency (in Mhz) to a channel number. */ -static inline u8 b43_freq_to_channel_a(int freq) +static inline u8 b43_freq_to_channel_5ghz(int freq) { return ((freq - 5000) / 5); } -static inline u8 b43_freq_to_channel_bg(int freq) +static inline u8 b43_freq_to_channel_2ghz(int freq) { u8 channel; @@ -54,19 +54,13 @@ static inline u8 b43_freq_to_channel_bg(int freq) return channel; } -static inline u8 b43_freq_to_channel(struct b43_wldev *dev, int freq) -{ - if (dev->phy.type == B43_PHYTYPE_A) - return b43_freq_to_channel_a(freq); - return b43_freq_to_channel_bg(freq); -} /* Lightweight function to convert a channel number to a frequency (in Mhz). */ -static inline int b43_channel_to_freq_a(u8 channel) +static inline int b43_channel_to_freq_5ghz(u8 channel) { return (5000 + (5 * channel)); } -static inline int b43_channel_to_freq_bg(u8 channel) +static inline int b43_channel_to_freq_2ghz(u8 channel) { int freq; @@ -77,12 +71,6 @@ static inline int b43_channel_to_freq_bg(u8 channel) return freq; } -static inline int b43_channel_to_freq(struct b43_wldev *dev, u8 channel) -{ - if (dev->phy.type == B43_PHYTYPE_A) - return b43_channel_to_freq_a(channel); - return b43_channel_to_freq_bg(channel); -} static inline int b43_is_cck_rate(int rate) { diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 98cf70c5fd47..11f53cb1139e 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -138,8 +138,11 @@ void b43_rfkill_init(struct b43_wldev *dev) rfk->rfkill->user_claim_unsupported = 1; rfk->poll_dev = input_allocate_polled_device(); - if (!rfk->poll_dev) - goto err_free_rfk; + if (!rfk->poll_dev) { + rfkill_free(rfk->rfkill); + goto err_freed_rfk; + } + rfk->poll_dev->private = dev; rfk->poll_dev->poll = b43_rfkill_poll; rfk->poll_dev->poll_interval = 1000; /* msecs */ @@ -175,8 +178,7 @@ err_unreg_rfk: err_free_polldev: input_free_polled_device(rfk->poll_dev); rfk->poll_dev = NULL; -err_free_rfk: - rfkill_free(rfk->rfkill); +err_freed_rfk: rfk->rfkill = NULL; out_error: rfk->registered = 0; @@ -195,6 +197,5 @@ void b43_rfkill_exit(struct b43_wldev *dev) rfkill_unregister(rfk->rfkill); input_free_polled_device(rfk->poll_dev); rfk->poll_dev = NULL; - rfkill_free(rfk->rfkill); rfk->rfkill = NULL; } diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 0bd6f8a348a8..3307ba1856b1 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -531,21 +531,32 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) switch (chanstat & B43_RX_CHAN_PHYTYPE) { case B43_PHYTYPE_A: status.phymode = MODE_IEEE80211A; - status.freq = chanid; - status.channel = b43_freq_to_channel_a(chanid); - break; - case B43_PHYTYPE_B: - status.phymode = MODE_IEEE80211B; - status.freq = chanid + 2400; - status.channel = b43_freq_to_channel_bg(chanid + 2400); + B43_WARN_ON(1); + /* FIXME: We don't really know which value the "chanid" contains. + * So the following assignment might be wrong. */ + status.channel = chanid; + status.freq = b43_channel_to_freq_5ghz(status.channel); break; case B43_PHYTYPE_G: status.phymode = MODE_IEEE80211G; + /* chanid is the radio channel cookie value as used + * to tune the radio. */ status.freq = chanid + 2400; - status.channel = b43_freq_to_channel_bg(chanid + 2400); + status.channel = b43_freq_to_channel_2ghz(status.freq); + break; + case B43_PHYTYPE_N: + status.phymode = 0xDEAD /*FIXME MODE_IEEE80211N*/; + /* chanid is the SHM channel cookie. Which is the plain + * channel number in b43. */ + status.channel = chanid; + if (chanstat & B43_RX_CHAN_5GHZ) + status.freq = b43_freq_to_channel_5ghz(status.freq); + else + status.freq = b43_freq_to_channel_2ghz(status.freq); break; default: B43_WARN_ON(1); + goto drop; } dev->stats.last_rx = jiffies; diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h index 03bddd251618..6dc079382f7f 100644 --- a/drivers/net/wireless/b43/xmit.h +++ b/drivers/net/wireless/b43/xmit.h @@ -142,49 +142,56 @@ struct b43_rxhdr_fw4 { } __attribute__ ((__packed__)); /* PHY RX Status 0 */ -#define B43_RX_PHYST0_GAINCTL 0x4000 /* Gain Control */ -#define B43_RX_PHYST0_PLCPHCF 0x0200 -#define B43_RX_PHYST0_PLCPFV 0x0100 -#define B43_RX_PHYST0_SHORTPRMBL 0x0080 /* Received with Short Preamble */ +#define B43_RX_PHYST0_GAINCTL 0x4000 /* Gain Control */ +#define B43_RX_PHYST0_PLCPHCF 0x0200 +#define B43_RX_PHYST0_PLCPFV 0x0100 +#define B43_RX_PHYST0_SHORTPRMBL 0x0080 /* Received with Short Preamble */ #define B43_RX_PHYST0_LCRS 0x0040 -#define B43_RX_PHYST0_ANT 0x0020 /* Antenna */ -#define B43_RX_PHYST0_UNSRATE 0x0010 +#define B43_RX_PHYST0_ANT 0x0020 /* Antenna */ +#define B43_RX_PHYST0_UNSRATE 0x0010 #define B43_RX_PHYST0_CLIP 0x000C #define B43_RX_PHYST0_CLIP_SHIFT 2 -#define B43_RX_PHYST0_FTYPE 0x0003 /* Frame type */ -#define B43_RX_PHYST0_CCK 0x0000 /* Frame type: CCK */ -#define B43_RX_PHYST0_OFDM 0x0001 /* Frame type: OFDM */ -#define B43_RX_PHYST0_PRE_N 0x0002 /* Pre-standard N-PHY frame */ -#define B43_RX_PHYST0_STD_N 0x0003 /* Standard N-PHY frame */ +#define B43_RX_PHYST0_FTYPE 0x0003 /* Frame type */ +#define B43_RX_PHYST0_CCK 0x0000 /* Frame type: CCK */ +#define B43_RX_PHYST0_OFDM 0x0001 /* Frame type: OFDM */ +#define B43_RX_PHYST0_PRE_N 0x0002 /* Pre-standard N-PHY frame */ +#define B43_RX_PHYST0_STD_N 0x0003 /* Standard N-PHY frame */ /* PHY RX Status 2 */ -#define B43_RX_PHYST2_LNAG 0xC000 /* LNA Gain */ +#define B43_RX_PHYST2_LNAG 0xC000 /* LNA Gain */ #define B43_RX_PHYST2_LNAG_SHIFT 14 -#define B43_RX_PHYST2_PNAG 0x3C00 /* PNA Gain */ +#define B43_RX_PHYST2_PNAG 0x3C00 /* PNA Gain */ #define B43_RX_PHYST2_PNAG_SHIFT 10 -#define B43_RX_PHYST2_FOFF 0x03FF /* F offset */ +#define B43_RX_PHYST2_FOFF 0x03FF /* F offset */ /* PHY RX Status 3 */ -#define B43_RX_PHYST3_DIGG 0x1800 /* DIG Gain */ +#define B43_RX_PHYST3_DIGG 0x1800 /* DIG Gain */ #define B43_RX_PHYST3_DIGG_SHIFT 11 -#define B43_RX_PHYST3_TRSTATE 0x0400 /* TR state */ +#define B43_RX_PHYST3_TRSTATE 0x0400 /* TR state */ /* MAC RX Status */ -#define B43_RX_MAC_BEACONSENT 0x00008000 /* Beacon send flag */ -#define B43_RX_MAC_KEYIDX 0x000007E0 /* Key index */ -#define B43_RX_MAC_KEYIDX_SHIFT 5 -#define B43_RX_MAC_DECERR 0x00000010 /* Decrypt error */ -#define B43_RX_MAC_DEC 0x00000008 /* Decryption attempted */ -#define B43_RX_MAC_PADDING 0x00000004 /* Pad bytes present */ -#define B43_RX_MAC_RESP 0x00000002 /* Response frame transmitted */ -#define B43_RX_MAC_FCSERR 0x00000001 /* FCS error */ +#define B43_RX_MAC_RXST_VALID 0x01000000 /* PHY RXST valid */ +#define B43_RX_MAC_TKIP_MICERR 0x00100000 /* TKIP MIC error */ +#define B43_RX_MAC_TKIP_MICATT 0x00080000 /* TKIP MIC attempted */ +#define B43_RX_MAC_AGGTYPE 0x00060000 /* Aggregation type */ +#define B43_RX_MAC_AGGTYPE_SHIFT 17 +#define B43_RX_MAC_AMSDU 0x00010000 /* A-MSDU mask */ +#define B43_RX_MAC_BEACONSENT 0x00008000 /* Beacon sent flag */ +#define B43_RX_MAC_KEYIDX 0x000007E0 /* Key index */ +#define B43_RX_MAC_KEYIDX_SHIFT 5 +#define B43_RX_MAC_DECERR 0x00000010 /* Decrypt error */ +#define B43_RX_MAC_DEC 0x00000008 /* Decryption attempted */ +#define B43_RX_MAC_PADDING 0x00000004 /* Pad bytes present */ +#define B43_RX_MAC_RESP 0x00000002 /* Response frame transmitted */ +#define B43_RX_MAC_FCSERR 0x00000001 /* FCS error */ /* RX channel */ -#define B43_RX_CHAN_GAIN 0xFC00 /* Gain */ -#define B43_RX_CHAN_GAIN_SHIFT 10 -#define B43_RX_CHAN_ID 0x03FC /* Channel ID */ -#define B43_RX_CHAN_ID_SHIFT 2 -#define B43_RX_CHAN_PHYTYPE 0x0003 /* PHY type */ +#define B43_RX_CHAN_40MHZ 0x1000 /* 40 Mhz channel width */ +#define B43_RX_CHAN_5GHZ 0x0800 /* 5 Ghz band */ +#define B43_RX_CHAN_ID 0x07F8 /* Channel ID */ +#define B43_RX_CHAN_ID_SHIFT 3 +#define B43_RX_CHAN_PHYTYPE 0x0007 /* PHY type */ + u8 b43_plcp_get_ratecode_cck(const u8 bitrate); u8 b43_plcp_get_ratecode_ofdm(const u8 bitrate); diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 040dc3e36410..cbf15d703201 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -608,7 +608,7 @@ static void prism2_plx_remove(struct pci_dev *pdev) MODULE_DEVICE_TABLE(pci, prism2_plx_id_table); -static struct pci_driver prism2_plx_drv_id = { +static struct pci_driver prism2_plx_driver = { .name = "hostap_plx", .id_table = prism2_plx_id_table, .probe = prism2_plx_probe, @@ -618,13 +618,13 @@ static struct pci_driver prism2_plx_drv_id = { static int __init init_prism2_plx(void) { - return pci_register_driver(&prism2_plx_drv_id); + return pci_register_driver(&prism2_plx_driver); } static void __exit exit_prism2_plx(void) { - pci_unregister_driver(&prism2_plx_drv_id); + pci_unregister_driver(&prism2_plx_driver); } diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index da51f477e9df..003f73f89efa 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -1233,9 +1233,19 @@ static ssize_t show_event_log(struct device *d, { struct ipw_priv *priv = dev_get_drvdata(d); u32 log_len = ipw_get_event_log_len(priv); - struct ipw_event log[log_len]; + u32 log_size; + struct ipw_event *log; u32 len = 0, i; + /* not using min() because of its strict type checking */ + log_size = PAGE_SIZE / sizeof(*log) > log_len ? + sizeof(*log) * log_len : PAGE_SIZE; + log = kzalloc(log_size, GFP_KERNEL); + if (!log) { + IPW_ERROR("Unable to allocate memory for log\n"); + return 0; + } + log_len = log_size / sizeof(*log); ipw_capture_event_log(priv, log_len, log); len += snprintf(buf + len, PAGE_SIZE - len, "%08X", log_len); @@ -1244,6 +1254,7 @@ static ssize_t show_event_log(struct device *d, "\n%08X%08X%08X", log[i].time, log[i].event, log[i].data); len += snprintf(buf + len, PAGE_SIZE - len, "\n"); + kfree(log); return len; } @@ -4924,7 +4935,7 @@ static int ipw_queue_reset(struct ipw_priv *priv) /** * Reclaim Tx queue entries no more used by NIC. * - * When FW adwances 'R' index, all entries between old and + * When FW advances 'R' index, all entries between old and * new 'R' index need to be reclaimed. As result, some free space * forms. If there is enough free space (> low mark), wake Tx queue. * diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 3d1da0759b97..1a6b0e0edf6f 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6246,8 +6246,6 @@ static void __iwl_down(struct iwl_priv *priv) /* Unblock any waiting calls */ wake_up_interruptible_all(&priv->wait_command_queue); - iwl_cancel_deferred_work(priv); - /* Wipe out the EXIT_PENDING status bit if we are not actually * exiting the module */ if (!exit_pending) @@ -6322,6 +6320,8 @@ static void iwl_down(struct iwl_priv *priv) mutex_lock(&priv->mutex); __iwl_down(priv); mutex_unlock(&priv->mutex); + + iwl_cancel_deferred_work(priv); } #define MAX_HW_RESTARTS 5 @@ -8580,10 +8580,9 @@ static void iwl_pci_remove(struct pci_dev *pdev) IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n"); - mutex_lock(&priv->mutex); set_bit(STATUS_EXIT_PENDING, &priv->status); - __iwl_down(priv); - mutex_unlock(&priv->mutex); + + iwl_down(priv); /* Free MAC hash list for ADHOC */ for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) { @@ -8642,12 +8641,10 @@ static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct iwl_priv *priv = pci_get_drvdata(pdev); - mutex_lock(&priv->mutex); - set_bit(STATUS_IN_SUSPEND, &priv->status); /* Take down the device; powers it off, etc. */ - __iwl_down(priv); + iwl_down(priv); if (priv->mac80211_registered) ieee80211_stop_queues(priv->hw); @@ -8656,8 +8653,6 @@ static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); - mutex_unlock(&priv->mutex); - return 0; } @@ -8715,8 +8710,6 @@ static int iwl_pci_resume(struct pci_dev *pdev) printk(KERN_INFO "Coming out of suspend...\n"); - mutex_lock(&priv->mutex); - pci_set_power_state(pdev, PCI_D0); err = pci_enable_device(pdev); pci_restore_state(pdev); @@ -8730,7 +8723,6 @@ static int iwl_pci_resume(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x41, 0x00); iwl_resume(priv); - mutex_unlock(&priv->mutex); return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index b54fe5e6d529..6cd57c220631 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -6601,8 +6601,6 @@ static void __iwl_down(struct iwl_priv *priv) /* Unblock any waiting calls */ wake_up_interruptible_all(&priv->wait_command_queue); - iwl_cancel_deferred_work(priv); - /* Wipe out the EXIT_PENDING status bit if we are not actually * exiting the module */ if (!exit_pending) @@ -6677,6 +6675,8 @@ static void iwl_down(struct iwl_priv *priv) mutex_lock(&priv->mutex); __iwl_down(priv); mutex_unlock(&priv->mutex); + + iwl_cancel_deferred_work(priv); } #define MAX_HW_RESTARTS 5 @@ -9174,10 +9174,9 @@ static void iwl_pci_remove(struct pci_dev *pdev) IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n"); - mutex_lock(&priv->mutex); set_bit(STATUS_EXIT_PENDING, &priv->status); - __iwl_down(priv); - mutex_unlock(&priv->mutex); + + iwl_down(priv); /* Free MAC hash list for ADHOC */ for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) { @@ -9236,12 +9235,10 @@ static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct iwl_priv *priv = pci_get_drvdata(pdev); - mutex_lock(&priv->mutex); - set_bit(STATUS_IN_SUSPEND, &priv->status); /* Take down the device; powers it off, etc. */ - __iwl_down(priv); + iwl_down(priv); if (priv->mac80211_registered) ieee80211_stop_queues(priv->hw); @@ -9250,8 +9247,6 @@ static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); - mutex_unlock(&priv->mutex); - return 0; } @@ -9309,8 +9304,6 @@ static int iwl_pci_resume(struct pci_dev *pdev) printk(KERN_INFO "Coming out of suspend...\n"); - mutex_lock(&priv->mutex); - pci_set_power_state(pdev, PCI_D0); err = pci_enable_device(pdev); pci_restore_state(pdev); @@ -9324,7 +9317,6 @@ static int iwl_pci_resume(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x41, 0x00); iwl_resume(priv); - mutex_unlock(&priv->mutex); return 0; } diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index b24425f74883..4f1efb108c28 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -871,6 +871,10 @@ static int if_sdio_probe(struct sdio_func *func, if (sscanf(func->card->info[i], "ID: %x", &model) == 1) break; + if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) { + model = 4; + break; + } } if (i == func->card->num_info) { diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 50775f9234cc..18b1f9145389 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -257,7 +257,7 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = { static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) { - rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, &mac, + rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, mac, (3 * sizeof(__le16))); } diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 2780df00623c..04663eb31950 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -124,7 +124,10 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) struct data_entry *entry; struct data_desc *rxd; struct sk_buff *skb; + struct ieee80211_hdr *hdr; struct rxdata_entry_desc desc; + int header_size; + int align; u32 word; while (1) { @@ -138,17 +141,26 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) memset(&desc, 0x00, sizeof(desc)); rt2x00dev->ops->lib->fill_rxdone(entry, &desc); + hdr = (struct ieee80211_hdr *)entry->data_addr; + header_size = + ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)); + + /* + * The data behind the ieee80211 header must be + * aligned on a 4 byte boundary. + */ + align = header_size % 4; + /* * Allocate the sk_buffer, initialize it and copy * all data into it. */ - skb = dev_alloc_skb(desc.size + NET_IP_ALIGN); + skb = dev_alloc_skb(desc.size + align); if (!skb) return; - skb_reserve(skb, NET_IP_ALIGN); - skb_put(skb, desc.size); - memcpy(skb->data, entry->data_addr, desc.size); + skb_reserve(skb, align); + memcpy(skb_put(skb, desc.size), entry->data_addr, desc.size); /* * Send the frame to rt2x00lib for further processing. diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 1f5675dd329f..568d73847dca 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -221,7 +221,9 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) struct data_ring *ring = entry->ring; struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; struct sk_buff *skb; + struct ieee80211_hdr *hdr; struct rxdata_entry_desc desc; + int header_size; int frame_size; if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || @@ -243,19 +245,37 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * Allocate a new sk buffer to replace the current one. * If allocation fails, we should drop the current frame * so we can recycle the existing sk buffer for the new frame. + * As alignment we use 2 and not NET_IP_ALIGN because we need + * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN + * can be 0 on some hardware). We use these 2 bytes for frame + * alignment later, we assume that the chance that + * header_size % 4 == 2 is bigger then header_size % 2 == 0 + * and thus optimize alignment by reserving the 2 bytes in + * advance. */ frame_size = entry->ring->data_size + entry->ring->desc_size; - skb = dev_alloc_skb(frame_size + NET_IP_ALIGN); + skb = dev_alloc_skb(frame_size + 2); if (!skb) goto skip_entry; - skb_reserve(skb, NET_IP_ALIGN); + skb_reserve(skb, 2); skb_put(skb, frame_size); /* - * Trim the skb_buffer to only contain the valid - * frame data (so ignore the device's descriptor). + * The data behind the ieee80211 header must be + * aligned on a 4 byte boundary. + * After that trim the entire buffer down to only + * contain the valid frame data excluding the device + * descriptor. */ + hdr = (struct ieee80211_hdr *)entry->skb->data; + header_size = + ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)); + + if (header_size % 4 == 0) { + skb_push(entry->skb, 2); + memmove(entry->skb->data, entry->skb->data + 2, skb->len - 2); + } skb_trim(entry->skb, desc.size); /* diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 01dbef19d651..ecae968ce091 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1738,6 +1738,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) { struct data_ring *ring; struct data_entry *entry; + struct data_entry *entry_done; struct data_desc *txd; u32 word; u32 reg; @@ -1791,6 +1792,17 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) !rt2x00_get_field32(word, TXD_W0_VALID)) return; + entry_done = rt2x00_get_data_entry_done(ring); + while (entry != entry_done) { + /* Catch up. Just report any entries we missed as + * failed. */ + WARNING(rt2x00dev, + "TX status report missed for entry %p\n", + entry_done); + rt2x00lib_txdone(entry_done, TX_FAIL_OTHER, 0); + entry_done = rt2x00_get_data_entry_done(ring); + } + /* * Obtain the status about this packet. */ diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index e454ae83e97a..bd1ab3b3afc0 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -38,6 +38,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x0846, 0x6a00)}, /* HP */ {USB_DEVICE(0x03f0, 0xca02)}, + /* Sitecom */ + {USB_DEVICE(0x0df6, 0x000d)}, {} }; |