diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8192cu/hw.c')
| -rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 17 |
1 files changed, 16 insertions, 1 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index 04aa0b5f5b3d..873363acbacf 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -1592,6 +1592,20 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) } } +bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + /* Currently nothing happens here. + * Traffic stops after some seconds in WPA2 802.11n mode. + * Maybe because rtl8192cu chip should be set from here? + * If I understand correctly, the realtek vendor driver sends some urbs + * if its "here". + * + * This is maybe necessary: + * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb); + */ + return true; +} + void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -1939,7 +1953,8 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) recover = true; rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp_reg422 & (~BIT(6))); - rtl92c_set_fw_rsvdpagepkt(hw, 0); + rtl92c_set_fw_rsvdpagepkt(hw, + &usb_cmd_send_packet); _rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0); _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4)); if (recover) |