diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800.h | 8 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800lib.c | 27 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800pci.c | 1 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800usb.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00mac.c | 14 |
6 files changed, 51 insertions, 4 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 9348521e0832..1ca88cdc6ece 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -51,6 +51,7 @@ * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390) * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392) * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662) + * RF5360 2.4G 1T1R * RF5370 2.4G 1T1R * RF5390 2.4G 1T1R */ @@ -67,9 +68,11 @@ #define RF3320 0x000b #define RF3322 0x000c #define RF3053 0x000d +#define RF5360 0x5360 #define RF5370 0x5370 #define RF5372 0x5372 #define RF5390 0x5390 +#define RF5392 0x5392 /* * Chipset revisions. @@ -1944,6 +1947,11 @@ struct mac_iveiv_entry { #define RFCSR49_TX FIELD8(0x3f) /* + * RFCSR 50: + */ +#define RFCSR50_TX FIELD8(0x3f) + +/* * RF registers */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index dfc90d34be6d..4d3747c3010b 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1958,7 +1958,22 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1); rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); + if (rt2x00_rt(rt2x00dev, RT5392)) { + rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr); + if (info->default_power1 > RT5390_POWER_BOUND) + rt2x00_set_field8(&rfcsr, RFCSR50_TX, + RT5390_POWER_BOUND); + else + rt2x00_set_field8(&rfcsr, RFCSR50_TX, + info->default_power2); + rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); + } + rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); + if (rt2x00_rt(rt2x00dev, RT5392)) { + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); + } rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); @@ -2060,9 +2075,11 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, case RF3052: rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info); break; + case RF5360: case RF5370: case RF5372: case RF5390: + case RF5392: rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info); break; default: @@ -2549,9 +2566,11 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev) rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); break; + case RF5360: case RF5370: case RF5372: case RF5390: + case RF5392: rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); @@ -4263,9 +4282,11 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) case RF3022: case RF3052: case RF3320: + case RF5360: case RF5370: case RF5372: case RF5390: + case RF5392: break; default: ERROR(rt2x00dev, "Invalid RF chipset 0x%04x detected.\n", @@ -4577,9 +4598,11 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00_rf(rt2x00dev, RF3021) || rt2x00_rf(rt2x00dev, RF3022) || rt2x00_rf(rt2x00dev, RF3320) || + rt2x00_rf(rt2x00dev, RF5360) || rt2x00_rf(rt2x00dev, RF5370) || rt2x00_rf(rt2x00dev, RF5372) || - rt2x00_rf(rt2x00dev, RF5390)) { + rt2x00_rf(rt2x00dev, RF5390) || + rt2x00_rf(rt2x00dev, RF5392)) { spec->num_channels = 14; spec->channels = rf_vals_3x; } else if (rt2x00_rf(rt2x00dev, RF3052)) { @@ -4662,9 +4685,11 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) case RF3022: case RF3320: case RF3052: + case RF5360: case RF5370: case RF5372: case RF5390: + case RF5392: __set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags); break; } diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index cad25bfebd7a..206158b67426 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1188,6 +1188,7 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { { PCI_DEVICE(0x1814, 0x3593) }, #endif #ifdef CONFIG_RT2800PCI_RT53XX + { PCI_DEVICE(0x1814, 0x5360) }, { PCI_DEVICE(0x1814, 0x5362) }, { PCI_DEVICE(0x1814, 0x5390) }, { PCI_DEVICE(0x1814, 0x5392) }, diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index bf78317a6adb..20a504072895 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1137,6 +1137,8 @@ static struct usb_device_id rt2800usb_device_table[] = { #ifdef CONFIG_RT2800USB_RT33XX /* Belkin */ { USB_DEVICE(0x050d, 0x945b) }, + /* D-Link */ + { USB_DEVICE(0x2001, 0x3c17) }, /* Panasonic */ { USB_DEVICE(0x083a, 0xb511) }, /* Philips */ @@ -1237,7 +1239,6 @@ static struct usb_device_id rt2800usb_device_table[] = { /* D-Link */ { USB_DEVICE(0x07d1, 0x3c0b) }, { USB_DEVICE(0x07d1, 0x3c17) }, - { USB_DEVICE(0x2001, 0x3c17) }, /* Encore */ { USB_DEVICE(0x203d, 0x14a1) }, /* Gemtek */ diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index e5404e576251..a6b88bd4a1a5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1161,6 +1161,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) BIT(NL80211_IFTYPE_MESH_POINT) | BIT(NL80211_IFTYPE_WDS); + rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + /* * Initialize work. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index dd24b2663b5e..4ff26c2159bf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -506,9 +506,19 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; - else if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) + + if (!test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) + return -EOPNOTSUPP; + + /* + * To support IBSS RSN, don't program group keys in IBSS, the + * hardware will then not attempt to decrypt the frames. + */ + if (vif->type == NL80211_IFTYPE_ADHOC && + !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) return -EOPNOTSUPP; - else if (key->keylen > 32) + + if (key->keylen > 32) return -ENOSPC; memset(&crypto, 0, sizeof(crypto)); |