diff options
Diffstat (limited to 'drivers/net/wireless/p54/p54spi.c')
-rw-r--r-- | drivers/net/wireless/p54/p54spi.c | 175 |
1 files changed, 89 insertions, 86 deletions
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index d1fe577de3d4..83116baeb110 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -96,7 +96,7 @@ static void p54spi_spi_write(struct p54s_priv *priv, u8 address, spi_message_add_tail(&t[0], &m); t[1].tx_buf = buf; - t[1].len = len; + t[1].len = len & ~1; spi_message_add_tail(&t[1], &m); if (len % 2) { @@ -167,15 +167,31 @@ static const struct p54spi_spi_reg p54spi_registers_array[] = static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits) { int i; - __le32 buffer; for (i = 0; i < 2000; i++) { - p54spi_spi_read(priv, reg, &buffer, sizeof(buffer)); - if (buffer == bits) + __le32 buffer = p54spi_read32(priv, reg); + if ((buffer & bits) == bits) return 1; + } + return 0; +} - msleep(1); +static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base, + const void *buf, size_t len) +{ + if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, + cpu_to_le32(HOST_ALLOWED))) { + dev_err(&priv->spi->dev, "spi_write_dma not allowed " + "to DMA write.\n"); + return -EAGAIN; } + + p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, + cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); + + p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len)); + p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base); + p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len); return 0; } @@ -228,8 +244,15 @@ static int p54spi_request_eeprom(struct ieee80211_hw *dev) static int p54spi_upload_firmware(struct ieee80211_hw *dev) { struct p54s_priv *priv = dev->priv; - unsigned long fw_len, fw_addr; - long _fw_len; + unsigned long fw_len, _fw_len; + unsigned int offset = 0; + int err = 0; + u8 *fw; + + fw_len = priv->firmware->size; + fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL); + if (!fw) + return -ENOMEM; /* stop the device */ p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( @@ -244,36 +267,17 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev) msleep(TARGET_BOOT_SLEEP); - fw_addr = ISL38XX_DEV_FIRMWARE_ADDR; - fw_len = priv->firmware->size; - while (fw_len > 0) { _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); - p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, - cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); - - if (p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, - cpu_to_le32(HOST_ALLOWED)) == 0) { - dev_err(&priv->spi->dev, "fw_upload not allowed " - "to DMA write."); - return -EAGAIN; - } - - p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, - cpu_to_le16(_fw_len)); - p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, - cpu_to_le32(fw_addr)); - - p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, - &priv->firmware->data, _fw_len); + err = p54spi_spi_write_dma(priv, cpu_to_le32( + ISL38XX_DEV_FIRMWARE_ADDR + offset), + (fw + offset), _fw_len); + if (err < 0) + goto out; fw_len -= _fw_len; - fw_addr += _fw_len; - - /* FIXME: I think this doesn't work if firmware is large, - * this loop goes to second round. fw->data is not - * increased at all! */ + offset += _fw_len; } BUG_ON(fw_len != 0); @@ -292,7 +296,10 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev) p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT)); msleep(TARGET_BOOT_SLEEP); - return 0; + +out: + kfree(fw); + return err; } static void p54spi_power_off(struct p54s_priv *priv) @@ -318,29 +325,21 @@ static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val) p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val)); } -static void p54spi_wakeup(struct p54s_priv *priv) +static int p54spi_wakeup(struct p54s_priv *priv) { - unsigned long timeout; - u32 ints; - /* wake the chip */ p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, cpu_to_le32(SPI_TARGET_INT_WAKEUP)); /* And wait for the READY interrupt */ - timeout = jiffies + HZ; - - ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); - while (!(ints & SPI_HOST_INT_READY)) { - if (time_after(jiffies, timeout)) - goto out; - ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); + if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, + cpu_to_le32(SPI_HOST_INT_READY))) { + dev_err(&priv->spi->dev, "INT_READY timeout\n"); + return -EBUSY; } p54spi_int_ack(priv, SPI_HOST_INT_READY); - -out: - return; + return 0; } static inline void p54spi_sleep(struct p54s_priv *priv) @@ -372,27 +371,48 @@ static int p54spi_rx(struct p54s_priv *priv) { struct sk_buff *skb; u16 len; + u16 rx_head[2]; +#define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16)) - p54spi_wakeup(priv); - - /* dummy read to flush SPI DMA controller bug */ - p54spi_read16(priv, SPI_ADRS_GEN_PURP_1); + if (p54spi_wakeup(priv) < 0) + return -EBUSY; - len = p54spi_read16(priv, SPI_ADRS_DMA_DATA); + /* Read data size and first data word in one SPI transaction + * This is workaround for firmware/DMA bug, + * when first data word gets lost under high load. + */ + p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head)); + len = rx_head[0]; if (len == 0) { - dev_err(&priv->spi->dev, "rx request of zero bytes"); + p54spi_sleep(priv); + dev_err(&priv->spi->dev, "rx request of zero bytes\n"); return 0; } - skb = dev_alloc_skb(len); + /* Firmware may insert up to 4 padding bytes after the lmac header, + * but it does not amend the size of SPI data transfer. + * Such packets has correct data size in header, thus referencing + * past the end of allocated skb. Reserve extra 4 bytes for this case */ + skb = dev_alloc_skb(len + 4); if (!skb) { + p54spi_sleep(priv); dev_err(&priv->spi->dev, "could not alloc skb"); - return 0; + return -ENOMEM; } - p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, skb_put(skb, len), len); + if (len <= READAHEAD_SZ) { + memcpy(skb_put(skb, len), rx_head + 1, len); + } else { + memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ); + p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, + skb_put(skb, len - READAHEAD_SZ), + len - READAHEAD_SZ); + } p54spi_sleep(priv); + /* Put additional bytes to compensate for the possible + * alignment-caused truncation */ + skb_put(skb, 4); if (p54_rx(priv->hw, skb) == 0) dev_kfree_skb(skb); @@ -414,39 +434,28 @@ static irqreturn_t p54spi_interrupt(int irq, void *config) static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) { struct p54_hdr *hdr = (struct p54_hdr *) skb->data; - struct p54s_dma_regs dma_regs; - unsigned long timeout; int ret = 0; - u32 ints; - - p54spi_wakeup(priv); - dma_regs.cmd = cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE); - dma_regs.len = cpu_to_le16(skb->len); - dma_regs.addr = hdr->req_id; + if (p54spi_wakeup(priv) < 0) + return -EBUSY; - p54spi_spi_write(priv, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs, - sizeof(dma_regs)); - - p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, skb->data, skb->len); + ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len); + if (ret < 0) + goto out; - timeout = jiffies + 2 * HZ; - ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); - while (!(ints & SPI_HOST_INT_WR_READY)) { - if (time_after(jiffies, timeout)) { - dev_err(&priv->spi->dev, "WR_READY timeout"); - ret = -1; - goto out; - } - ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); + if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, + cpu_to_le32(SPI_HOST_INT_WR_READY))) { + dev_err(&priv->spi->dev, "WR_READY timeout\n"); + ret = -EAGAIN; + goto out; } p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); - p54spi_sleep(priv); -out: if (FREE_AFTER_TX(skb)) p54_free_skb(priv->hw, skb); +out: + p54spi_sleep(priv); return ret; } @@ -516,8 +525,7 @@ static void p54spi_work(struct work_struct *work) mutex_lock(&priv->mutex); - if (priv->fw_state == FW_STATE_OFF && - priv->fw_state == FW_STATE_RESET) + if (priv->fw_state == FW_STATE_OFF) goto out; ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); @@ -544,11 +552,6 @@ static void p54spi_work(struct work_struct *work) } ret = p54spi_wq_tx(priv); - if (ret < 0) - goto out; - - ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); - out: mutex_unlock(&priv->mutex); } |