diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/fw-api-power.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/fw-api-power.h | 98 |
1 files changed, 95 insertions, 3 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index 81fe45f46be7..a6da359a80c3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -66,6 +66,11 @@ /* Power Management Commands, Responses, Notifications */ +/* Radio LP RX Energy Threshold measured in dBm */ +#define POWER_LPRX_RSSI_THRESHOLD 75 +#define POWER_LPRX_RSSI_THRESHOLD_MAX 94 +#define POWER_LPRX_RSSI_THRESHOLD_MIN 30 + /** * enum iwl_scan_flags - masks for power table command flags * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off @@ -101,20 +106,107 @@ enum iwl_power_flags { * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to * PSM transition - legacy PM * @sleep_interval: not in use - * @keep_alive_beacons: not in use + * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag + * is set. For example, if it is required to skip over + * one DTIM, this value need to be set to 2 (DTIM periods). * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. * Default: 80dbm */ struct iwl_powertable_cmd { - /* PM_POWER_TABLE_CMD_API_S_VER_5 */ + /* PM_POWER_TABLE_CMD_API_S_VER_6 */ __le16 flags; u8 keep_alive_seconds; u8 debug_flags; __le32 rx_data_timeout; __le32 tx_data_timeout; __le32 sleep_interval[IWL_POWER_VEC_SIZE]; - __le32 keep_alive_beacons; + __le32 skip_dtim_periods; __le32 lprx_rssi_threshold; } __packed; +/** + * struct iwl_beacon_filter_cmd + * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) + * @id_and_color: MAC contex identifier + * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon + * to driver if delta in Energy values calculated for this and last + * passed beacon is greater than this threshold. Zero value means that + * the Energy change is ignored for beacon filtering, and beacon will + * not be forced to be sent to driver regardless of this delta. Typical + * energy delta 5dB. + * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. + * Send beacon to driver if delta in Energy values calculated for this + * and last passed beacon is greater than this threshold. Zero value + * means that the Energy change is ignored for beacon filtering while in + * Roaming state, typical energy delta 1dB. + * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values + * calculated for current beacon is less than the threshold, use + * Roaming Energy Delta Threshold, otherwise use normal Energy Delta + * Threshold. Typical energy threshold is -72dBm. + * @bf_temperature_delta: Send Beacon to driver if delta in temperature values + * calculated for this and the last passed beacon is greater than this + * threshold. Zero value means that the temperature changeis ignored for + * beacon filtering; beacons will not be forced to be sent to driver + * regardless of whether its temerature has been changed. + * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. + * @bf_filter_escape_timer: Send beacons to to driver if no beacons were passed + * for a specific period of time. Units: Beacons. + * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed + * for a longer period of time then this escape-timeout. Units: Beacons. + * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. + */ +struct iwl_beacon_filter_cmd { + u8 bf_energy_delta; + u8 bf_roaming_energy_delta; + u8 bf_roaming_state; + u8 bf_temperature_delta; + u8 bf_enable_beacon_filter; + u8 bf_debug_flag; + __le16 reserved1; + __le32 bf_escape_timer; + __le32 ba_escape_timer; + u8 ba_enable_beacon_abort; + u8 reserved2[3]; +} __packed; + +/* Beacon filtering and beacon abort */ +#define IWL_BF_ENERGY_DELTA_DEFAULT 5 +#define IWL_BF_ENERGY_DELTA_MAX 255 +#define IWL_BF_ENERGY_DELTA_MIN 0 + +#define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 +#define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255 +#define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0 + +#define IWL_BF_ROAMING_STATE_DEFAULT 72 +#define IWL_BF_ROAMING_STATE_MAX 255 +#define IWL_BF_ROAMING_STATE_MIN 0 + +#define IWL_BF_TEMPERATURE_DELTA_DEFAULT 5 +#define IWL_BF_TEMPERATURE_DELTA_MAX 255 +#define IWL_BF_TEMPERATURE_DELTA_MIN 0 + +#define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1 + +#define IWL_BF_DEBUG_FLAG_DEFAULT 0 + +#define IWL_BF_ESCAPE_TIMER_DEFAULT 50 +#define IWL_BF_ESCAPE_TIMER_MAX 1024 +#define IWL_BF_ESCAPE_TIMER_MIN 0 + +#define IWL_BA_ESCAPE_TIMER_DEFAULT 3 +#define IWL_BA_ESCAPE_TIMER_MAX 1024 +#define IWL_BA_ESCAPE_TIMER_MIN 0 + +#define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1 + +#define IWL_BF_CMD_CONFIG_DEFAULTS \ + .bf_energy_delta = IWL_BF_ENERGY_DELTA_DEFAULT, \ + .bf_roaming_energy_delta = IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT, \ + .bf_roaming_state = IWL_BF_ROAMING_STATE_DEFAULT, \ + .bf_temperature_delta = IWL_BF_TEMPERATURE_DELTA_DEFAULT, \ + .bf_debug_flag = IWL_BF_DEBUG_FLAG_DEFAULT, \ + .bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER_DEFAULT), \ + .ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER_DEFAULT) + #endif |