diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c')
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 1596 |
1 files changed, 802 insertions, 794 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index b02953c4ade7..3e991897d7ca 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -32,6 +32,7 @@ #include <linux/debugfs.h> #include <linux/vmalloc.h> #include <linux/platform_data/brcmfmac-sdio.h> +#include <linux/moduleparam.h> #include <asm/unaligned.h> #include <defs.h> #include <brcmu_wifi.h> @@ -40,6 +41,7 @@ #include <soc.h> #include "sdio_host.h" #include "sdio_chip.h" +#include "nvram.h" #define DCMD_RESP_TIMEOUT 2000 /* In milli second */ @@ -110,6 +112,8 @@ struct rte_console { #define BRCMF_TXBOUND 20 /* Default for max tx frames in one scheduling */ +#define BRCMF_DEFAULT_TXGLOM_SIZE 32 /* max tx frames in glom chain */ + #define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */ #define MEMBLOCK 2048 /* Block size used for downloading @@ -257,9 +261,6 @@ struct rte_console { #define MAX_HDR_READ (1 << 6) #define MAX_RX_DATASZ 2048 -/* Maximum milliseconds to wait for F2 to come up */ -#define BRCMF_WAIT_F2RDY 3000 - /* Bump up limit on waiting for HT to account for first startup; * if the image is doing a CRC calculation before programming the PMU * for HT availability, it could take a couple hundred ms more, so @@ -360,15 +361,15 @@ struct brcmf_sdio_hdrinfo { u16 len_left; u16 len_nxtfrm; u8 dat_offset; + bool lastfrm; + u16 tail_pad; }; /* misc chip info needed by some of the routines */ /* Private data for SDIO bus interaction */ struct brcmf_sdio { struct brcmf_sdio_dev *sdiodev; /* sdio device handler */ - struct chip_info *ci; /* Chip info struct */ - char *vars; /* Variables (from CIS and/or other) */ - uint varsz; /* Size of variables buffer */ + struct brcmf_chip *ci; /* Chip info struct */ u32 ramsize; /* Size of RAM in SOCRAM (bytes) */ @@ -384,7 +385,7 @@ struct brcmf_sdio { u8 tx_seq; /* Transmit sequence number (next) */ u8 tx_max; /* Maximum transmit sequence allowed */ - u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN]; + u8 *hdrbuf; /* buffer for handling rx frame */ u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */ u8 rx_seq; /* Receive sequence number (expected) */ struct brcmf_sdio_hdrinfo cur_read; @@ -455,6 +456,10 @@ struct brcmf_sdio { bool sleeping; /* SDIO bus sleeping */ u8 tx_hdrlen; /* sdio bus header length for tx packet */ + bool txglom; /* host tx glomming enable flag */ + struct sk_buff *txglom_sgpad; /* scatter-gather padding buffer */ + u16 head_align; /* buffer pointer alignment */ + u16 sgentry_align; /* scatter-gather buffer alignment */ }; /* clkstate */ @@ -479,6 +484,10 @@ static const uint max_roundup = 512; #define ALIGNMENT 4 +static int brcmf_sdio_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE; +module_param_named(txglomsz, brcmf_sdio_txglomsz, int, 0); +MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]"); + enum brcmf_sdio_frmtype { BRCMF_SDIO_FT_NORMAL, BRCMF_SDIO_FT_SUPER, @@ -499,6 +508,10 @@ enum brcmf_sdio_frmtype { #define BCM4334_NVRAM_NAME "brcm/brcmfmac4334-sdio.txt" #define BCM4335_FIRMWARE_NAME "brcm/brcmfmac4335-sdio.bin" #define BCM4335_NVRAM_NAME "brcm/brcmfmac4335-sdio.txt" +#define BCM43362_FIRMWARE_NAME "brcm/brcmfmac43362-sdio.bin" +#define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt" +#define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin" +#define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt" MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME); MODULE_FIRMWARE(BCM43143_NVRAM_NAME); @@ -514,6 +527,10 @@ MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4334_NVRAM_NAME); MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4335_NVRAM_NAME); +MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM43362_NVRAM_NAME); +MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM4339_NVRAM_NAME); struct brcmf_firmware_names { u32 chipid; @@ -537,11 +554,13 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = { { BCM4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) }, { BCM4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) }, { BCM4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, - { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) } + { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, + { BCM43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, + { BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) } }; -static const struct firmware *brcmf_sdbrcm_get_fw(struct brcmf_sdio *bus, +static const struct firmware *brcmf_sdio_get_fw(struct brcmf_sdio *bus, enum brcmf_firmware_type type) { const struct firmware *fw; @@ -606,8 +625,8 @@ r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); int ret; - *regvar = brcmf_sdio_regrl(bus->sdiodev, - bus->ci->c_inf[idx].base + offset, &ret); + *regvar = brcmf_sdiod_regrl(bus->sdiodev, + bus->ci->c_inf[idx].base + offset, &ret); return ret; } @@ -618,15 +637,15 @@ w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); int ret; - brcmf_sdio_regwl(bus->sdiodev, - bus->ci->c_inf[idx].base + reg_offset, - regval, &ret); + brcmf_sdiod_regwl(bus->sdiodev, + bus->ci->c_inf[idx].base + reg_offset, + regval, &ret); return ret; } static int -brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) +brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) { u8 wr_val = 0, rd_val, cmp_val, bmask; int err = 0; @@ -636,8 +655,8 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); /* 1st KSO write goes to AOS wake up core if device is asleep */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - wr_val, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + wr_val, &err); if (err) { brcmf_err("SDIO_AOS KSO write error: %d\n", err); return err; @@ -667,15 +686,15 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) * just one write attempt may fail, * read it back until it matches written value */ - rd_val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - &err); + rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + &err); if (((rd_val & bmask) == cmp_val) && !err) break; brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n", try_cnt, MAX_KSO_ATTEMPTS, err); udelay(KSO_WAIT_US); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - wr_val, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + wr_val, &err); } while (try_cnt++ < MAX_KSO_ATTEMPTS); return err; @@ -686,7 +705,7 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) #define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) /* Turn backplane clock on or off */ -static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) +static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok) { int err; u8 clkctl, clkreq, devctl; @@ -706,16 +725,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) clkreq = bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - clkreq, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); if (err) { brcmf_err("HT Avail request error: %d\n", err); return -EBADE; } /* Check current status */ - clkctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_err("HT Avail read error: %d\n", err); return -EBADE; @@ -724,8 +743,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) /* Go to pending and await interrupt if appropriate */ if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { /* Allow only clock-available interrupt */ - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_err("Devctl error setting CA: %d\n", err); @@ -733,28 +752,28 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } devctl |= SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - devctl, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); brcmf_dbg(SDIO, "CLKCTL: set PENDING\n"); bus->clkstate = CLK_PENDING; return 0; } else if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - devctl, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); } /* Otherwise, wait here (polling) for HT Avail */ timeout = jiffies + msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000); while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { - clkctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, - &err); + clkctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); if (time_after(jiffies, timeout)) break; else @@ -787,16 +806,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - devctl, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); } bus->clkstate = CLK_SDONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - clkreq, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); brcmf_dbg(SDIO, "CLKCTL: turned OFF\n"); if (err) { brcmf_err("Failed access turning clock off: %d\n", @@ -808,7 +827,7 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } /* Change idle/active SD state */ -static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on) +static int brcmf_sdio_sdclk(struct brcmf_sdio *bus, bool on) { brcmf_dbg(SDIO, "Enter\n"); @@ -821,7 +840,7 @@ static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on) } /* Transition SD and backplane clock readiness */ -static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) +static int brcmf_sdio_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) { #ifdef DEBUG uint oldstate = bus->clkstate; @@ -832,7 +851,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) /* Early exit if we're already there */ if (bus->clkstate == target) { if (target == CLK_AVAIL) { - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); bus->activity = true; } return 0; @@ -842,32 +861,32 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) case CLK_AVAIL: /* Make sure SD clock is available */ if (bus->clkstate == CLK_NONE) - brcmf_sdbrcm_sdclk(bus, true); + brcmf_sdio_sdclk(bus, true); /* Now request HT Avail on the backplane */ - brcmf_sdbrcm_htclk(bus, true, pendok); - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_htclk(bus, true, pendok); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); bus->activity = true; break; case CLK_SDONLY: /* Remove HT request, or bring up SD clock */ if (bus->clkstate == CLK_NONE) - brcmf_sdbrcm_sdclk(bus, true); + brcmf_sdio_sdclk(bus, true); else if (bus->clkstate == CLK_AVAIL) - brcmf_sdbrcm_htclk(bus, false, false); + brcmf_sdio_htclk(bus, false, false); else brcmf_err("request for %d -> %d\n", bus->clkstate, target); - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); break; case CLK_NONE: /* Make sure to remove HT request */ if (bus->clkstate == CLK_AVAIL) - brcmf_sdbrcm_htclk(bus, false, false); + brcmf_sdio_htclk(bus, false, false); /* Now remove the SD clock */ - brcmf_sdbrcm_sdclk(bus, false); - brcmf_sdbrcm_wd_timer(bus, 0); + brcmf_sdio_sdclk(bus, false); + brcmf_sdio_wd_timer(bus, 0); break; } #ifdef DEBUG @@ -878,7 +897,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) } static int -brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) +brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) { int err = 0; brcmf_dbg(TRACE, "Enter\n"); @@ -901,13 +920,13 @@ brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && data_ok(bus))) return -EBUSY; - err = brcmf_sdbrcm_kso_control(bus, false); + err = brcmf_sdio_kso_control(bus, false); /* disable watchdog */ if (!err) - brcmf_sdbrcm_wd_timer(bus, 0); + brcmf_sdio_wd_timer(bus, 0); } else { bus->idlecount = 0; - err = brcmf_sdbrcm_kso_control(bus, true); + err = brcmf_sdio_kso_control(bus, true); } if (!err) { /* Change state */ @@ -925,16 +944,16 @@ end: /* control clocks */ if (sleep) { if (!bus->sr_enabled) - brcmf_sdbrcm_clkctl(bus, CLK_NONE, pendok); + brcmf_sdio_clkctl(bus, CLK_NONE, pendok); } else { - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, pendok); + brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok); } return err; } -static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus) +static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) { u32 intstatus = 0; u32 hmb_data; @@ -1010,7 +1029,7 @@ static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus) return intstatus; } -static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) +static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) { uint retries = 0; u16 lastrbc; @@ -1022,18 +1041,18 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) rtx ? ", send NAK" : ""); if (abort) - brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_RF_TERM, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_RF_TERM, &err); bus->sdcnt.f1regdata++; /* Wait until the packet has been flushed (device/FIFO stable) */ for (lastrbc = retries = 0xffff; retries > 0; retries--) { - hi = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_RFRAMEBCHI, &err); - lo = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_RFRAMEBCLO, &err); + hi = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCHI, &err); + lo = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCLO, &err); bus->sdcnt.f1regdata += 2; if ((hi == 0) && (lo == 0)) @@ -1063,14 +1082,10 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) /* Clear partial in any case */ bus->cur_read.len = 0; - - /* If we can't reach the device, signal failure */ - if (err) - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } /* return total length of buffer chain */ -static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus) +static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus) { struct sk_buff *p; uint total; @@ -1081,7 +1096,7 @@ static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus) return total; } -static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) +static void brcmf_sdio_free_glom(struct brcmf_sdio *bus) { struct sk_buff *cur, *next; @@ -1097,10 +1112,18 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) * host and WiFi dongle which contains information needed for SDIO core and * firmware * - * It consists of 2 parts: hw header and software header + * It consists of 3 parts: hardware header, hardware extension header and + * software header * hardware header (frame tag) - 4 bytes * Byte 0~1: Frame length * Byte 2~3: Checksum, bit-wise inverse of frame length + * hardware extension header - 8 bytes + * Tx glom mode only, N/A for Rx or normal Tx + * Byte 0~1: Packet length excluding hw frame tag + * Byte 2: Reserved + * Byte 3: Frame flags, bit 0: last frame indication + * Byte 4~5: Reserved + * Byte 6~7: Tail padding length * software header - 8 bytes * Byte 0: Rx/Tx sequence number * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag @@ -1111,6 +1134,7 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) * Byte 6~7: Reserved */ #define SDPCM_HWHDR_LEN 4 +#define SDPCM_HWEXT_LEN 8 #define SDPCM_SWHDR_LEN 8 #define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN) /* software header */ @@ -1147,7 +1171,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, u8 rx_seq, fc, tx_seq_max; u32 swheader; - trace_brcmf_sdpcm_hdr(false, header); + trace_brcmf_sdpcm_hdr(SDPCM_RX, header); /* hw header */ len = get_unaligned_le16(header); @@ -1160,7 +1184,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, if ((u16)(~(len ^ checksum))) { brcmf_err("HW header checksum error\n"); bus->sdcnt.rx_badhdr++; - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); return -EIO; } if (len < SDPCM_HDRLEN) { @@ -1192,7 +1216,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, type != BRCMF_SDIO_FT_SUPER) { brcmf_err("HW header length too long\n"); bus->sdcnt.rx_toolong++; - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); rd->len = 0; return -EPROTO; } @@ -1211,7 +1235,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) { brcmf_err("seq %d: bad data offset\n", rx_seq); bus->sdcnt.rx_badhdr++; - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); rd->len = 0; return -ENXIO; } @@ -1260,25 +1284,34 @@ static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length) static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header, struct brcmf_sdio_hdrinfo *hd_info) { - u32 sw_header; + u32 hdrval; + u8 hdr_offset; brcmf_sdio_update_hwhdr(header, hd_info->len); - - sw_header = bus->tx_seq; - sw_header |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & - SDPCM_CHANNEL_MASK; - sw_header |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & - SDPCM_DOFFSET_MASK; - *(((__le32 *)header) + 1) = cpu_to_le32(sw_header); - *(((__le32 *)header) + 2) = 0; - trace_brcmf_sdpcm_hdr(true, header); + hdr_offset = SDPCM_HWHDR_LEN; + + if (bus->txglom) { + hdrval = (hd_info->len - hdr_offset) | (hd_info->lastfrm << 24); + *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); + hdrval = (u16)hd_info->tail_pad << 16; + *(((__le32 *)(header + hdr_offset)) + 1) = cpu_to_le32(hdrval); + hdr_offset += SDPCM_HWEXT_LEN; + } + + hdrval = hd_info->seq_num; + hdrval |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & + SDPCM_CHANNEL_MASK; + hdrval |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & + SDPCM_DOFFSET_MASK; + *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); + *(((__le32 *)(header + hdr_offset)) + 1) = 0; + trace_brcmf_sdpcm_hdr(SDPCM_TX + !!(bus->txglom), header); } -static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) +static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq) { u16 dlen, totlen; u8 *dptr, num = 0; - u32 align = 0; u16 sublen; struct sk_buff *pfirst, *pnext; @@ -1293,11 +1326,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) brcmf_dbg(SDIO, "start: glomd %p glom %p\n", bus->glomd, skb_peek(&bus->glom)); - if (bus->sdiodev->pdata) - align = bus->sdiodev->pdata->sd_sgentry_align; - if (align < 4) - align = 4; - /* If there's a descriptor, generate the packet chain */ if (bus->glomd) { pfirst = pnext = NULL; @@ -1321,9 +1349,9 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) pnext = NULL; break; } - if (sublen % align) { + if (sublen % bus->sgentry_align) { brcmf_err("sublen %d not multiple of %d\n", - sublen, align); + sublen, bus->sgentry_align); } totlen += sublen; @@ -1336,7 +1364,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } /* Allocate/chain packet for next subframe */ - pnext = brcmu_pkt_buf_get_skb(sublen + align); + pnext = brcmu_pkt_buf_get_skb(sublen + bus->sgentry_align); if (pnext == NULL) { brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n", num, sublen); @@ -1345,7 +1373,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) skb_queue_tail(&bus->glom, pnext); /* Adhere to start alignment requirements */ - pkt_align(pnext, sublen, align); + pkt_align(pnext, sublen, bus->sgentry_align); } /* If all allocations succeeded, save packet chain @@ -1360,7 +1388,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } pfirst = pnext = NULL; } else { - brcmf_sdbrcm_free_glom(bus); + brcmf_sdio_free_glom(bus); num = 0; } @@ -1383,16 +1411,15 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } pfirst = skb_peek(&bus->glom); - dlen = (u16) brcmf_sdbrcm_glom_len(bus); + dlen = (u16) brcmf_sdio_glom_len(bus); /* Do an SDIO read for the superframe. Configurable iovar to * read directly into the chained packet, or allocate a large * packet and and copy into the chain. */ sdio_claim_host(bus->sdiodev->func[1]); - errcode = brcmf_sdcard_recv_chain(bus->sdiodev, - bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, &bus->glom, dlen); + errcode = brcmf_sdiod_recv_chain(bus->sdiodev, + &bus->glom, dlen); sdio_release_host(bus->sdiodev->func[1]); bus->sdcnt.f2rxdata++; @@ -1403,12 +1430,12 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) sdio_claim_host(bus->sdiodev->func[1]); if (bus->glomerr++ < 3) { - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); } else { bus->glomerr = 0; - brcmf_sdbrcm_rxfail(bus, true, false); + brcmf_sdio_rxfail(bus, true, false); bus->sdcnt.rxglomfail++; - brcmf_sdbrcm_free_glom(bus); + brcmf_sdio_free_glom(bus); } sdio_release_host(bus->sdiodev->func[1]); return 0; @@ -1456,12 +1483,12 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) if (bus->glomerr++ < 3) { /* Restore superframe header space */ skb_push(pfirst, sfdoff); - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); } else { bus->glomerr = 0; - brcmf_sdbrcm_rxfail(bus, true, false); + brcmf_sdio_rxfail(bus, true, false); bus->sdcnt.rxglomfail++; - brcmf_sdbrcm_free_glom(bus); + brcmf_sdio_free_glom(bus); } sdio_release_host(bus->sdiodev->func[1]); bus->cur_read.len = 0; @@ -1505,8 +1532,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) return num; } -static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition, - bool *pending) +static int brcmf_sdio_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition, + bool *pending) { DECLARE_WAITQUEUE(wait, current); int timeout = msecs_to_jiffies(DCMD_RESP_TIMEOUT); @@ -1527,7 +1554,7 @@ static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition, return timeout; } -static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_sdio *bus) +static int brcmf_sdio_dcmd_resp_wake(struct brcmf_sdio *bus) { if (waitqueue_active(&bus->dcmd_resp_wait)) wake_up_interruptible(&bus->dcmd_resp_wait); @@ -1535,7 +1562,7 @@ static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_sdio *bus) return 0; } static void -brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) +brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) { uint rdlen, pad; u8 *buf = NULL, *rbuf; @@ -1549,9 +1576,9 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) goto done; rbuf = bus->rxbuf; - pad = ((unsigned long)rbuf % BRCMF_SDALIGN); + pad = ((unsigned long)rbuf % bus->head_align); if (pad) - rbuf += (BRCMF_SDALIGN - pad); + rbuf += (bus->head_align - pad); /* Copy the already-read portion over */ memcpy(buf, hdr, BRCMF_FIRSTREAD); @@ -1565,19 +1592,15 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) if ((pad <= bus->roundup) && (pad < bus->blocksize) && ((len + pad) < bus->sdiodev->bus_if->maxctl)) rdlen += pad; - } else if (rdlen % BRCMF_SDALIGN) { - rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN); + } else if (rdlen % bus->head_align) { + rdlen += bus->head_align - (rdlen % bus->head_align); } - /* Satisfy length-alignment requirements */ - if (rdlen & (ALIGNMENT - 1)) - rdlen = roundup(rdlen, ALIGNMENT); - /* Drop if the read is too big or it exceeds our maximum */ if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) { brcmf_err("%d-byte control read exceeds %d-byte buffer\n", rdlen, bus->sdiodev->bus_if->maxctl); - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); goto done; } @@ -1585,15 +1608,12 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", len, len - doff, bus->sdiodev->bus_if->maxctl); bus->sdcnt.rx_toolong++; - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); goto done; } /* Read remain of frame body */ - sdret = brcmf_sdcard_recv_buf(bus->sdiodev, - bus->sdiodev->sbwad, - SDIO_FUNC_2, - F2SYNC, rbuf, rdlen); + sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen); bus->sdcnt.f2rxdata++; /* Control frame failures need retransmission */ @@ -1601,7 +1621,7 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) brcmf_err("read %d control bytes failed: %d\n", rdlen, sdret); bus->sdcnt.rxc_errors++; - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); goto done; } else memcpy(buf + BRCMF_FIRSTREAD, rbuf, rdlen); @@ -1626,19 +1646,19 @@ gotpkt: done: /* Awake any waiters */ - brcmf_sdbrcm_dcmd_resp_wake(bus); + brcmf_sdio_dcmd_resp_wake(bus); } /* Pad read to blocksize for efficiency */ -static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) +static void brcmf_sdio_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) { if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) { *pad = bus->blocksize - (*rdlen % bus->blocksize); if (*pad <= bus->roundup && *pad < bus->blocksize && *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ) *rdlen += *pad; - } else if (*rdlen % BRCMF_SDALIGN) { - *rdlen += BRCMF_SDALIGN - (*rdlen % BRCMF_SDALIGN); + } else if (*rdlen % bus->head_align) { + *rdlen += bus->head_align - (*rdlen % bus->head_align); } } @@ -1658,8 +1678,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) bus->rxpending = true; for (rd->seq_num = bus->rx_seq, rxleft = maxframes; - !bus->rxskip && rxleft && - bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN; + !bus->rxskip && rxleft && brcmf_bus_ready(bus->sdiodev->bus_if); rd->seq_num++, rxleft--) { /* Handle glomming separately */ @@ -1667,7 +1686,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) u8 cnt; brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n", bus->glomd, skb_peek(&bus->glom)); - cnt = brcmf_sdbrcm_rxglom(bus, rd->seq_num); + cnt = brcmf_sdio_rxglom(bus, rd->seq_num); brcmf_dbg(GLOM, "rxglom returned %d\n", cnt); rd->seq_num += cnt - 1; rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1; @@ -1678,17 +1697,14 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) /* read header first for unknow frame length */ sdio_claim_host(bus->sdiodev->func[1]); if (!rd->len) { - ret = brcmf_sdcard_recv_buf(bus->sdiodev, - bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, - bus->rxhdr, - BRCMF_FIRSTREAD); + ret = brcmf_sdiod_recv_buf(bus->sdiodev, + bus->rxhdr, BRCMF_FIRSTREAD); bus->sdcnt.f2rxhdrs++; if (ret < 0) { brcmf_err("RXHEADER FAILED: %d\n", ret); bus->sdcnt.rx_hdrfail++; - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); sdio_release_host(bus->sdiodev->func[1]); continue; } @@ -1707,9 +1723,9 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) } if (rd->channel == SDPCM_CONTROL_CHANNEL) { - brcmf_sdbrcm_read_control(bus, bus->rxhdr, - rd->len, - rd->dat_offset); + brcmf_sdio_read_control(bus, bus->rxhdr, + rd->len, + rd->dat_offset); /* prepare the descriptor for the next read */ rd->len = rd->len_nxtfrm << 4; rd->len_nxtfrm = 0; @@ -1723,23 +1739,22 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) head_read = BRCMF_FIRSTREAD; } - brcmf_pad(bus, &pad, &rd->len_left); + brcmf_sdio_pad(bus, &pad, &rd->len_left); pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read + - BRCMF_SDALIGN); + bus->head_align); if (!pkt) { /* Give up on data, request rtx of events */ brcmf_err("brcmu_pkt_buf_get_skb failed\n"); - brcmf_sdbrcm_rxfail(bus, false, + brcmf_sdio_rxfail(bus, false, RETRYCHAN(rd->channel)); sdio_release_host(bus->sdiodev->func[1]); continue; } skb_pull(pkt, head_read); - pkt_align(pkt, rd->len_left, BRCMF_SDALIGN); + pkt_align(pkt, rd->len_left, bus->head_align); - ret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, pkt); + ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt); bus->sdcnt.f2rxdata++; sdio_release_host(bus->sdiodev->func[1]); @@ -1748,7 +1763,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) rd->len, rd->channel, ret); brcmu_pkt_buf_free_skb(pkt); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_rxfail(bus, true, + brcmf_sdio_rxfail(bus, true, RETRYCHAN(rd->channel)); sdio_release_host(bus->sdiodev->func[1]); continue; @@ -1773,7 +1788,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) rd->len, roundup(rd_new.len, 16) >> 4); rd->len = 0; - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); sdio_release_host(bus->sdiodev->func[1]); brcmu_pkt_buf_free_skb(pkt); continue; @@ -1795,7 +1810,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) /* Force retry w/normal header read */ rd->len = 0; sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_rxfail(bus, false, true); + brcmf_sdio_rxfail(bus, false, true); sdio_release_host(bus->sdiodev->func[1]); brcmu_pkt_buf_free_skb(pkt); continue; @@ -1820,7 +1835,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) brcmf_err("%s: glom superframe w/o " "descriptor!\n", __func__); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); sdio_release_host(bus->sdiodev->func[1]); } /* prepare the descriptor for the next read */ @@ -1864,13 +1879,36 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) } static void -brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus) +brcmf_sdio_wait_event_wakeup(struct brcmf_sdio *bus) { if (waitqueue_active(&bus->ctrl_wait)) wake_up_interruptible(&bus->ctrl_wait); return; } +static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt) +{ + u16 head_pad; + u8 *dat_buf; + + dat_buf = (u8 *)(pkt->data); + + /* Check head padding */ + head_pad = ((unsigned long)dat_buf % bus->head_align); + if (head_pad) { + if (skb_headroom(pkt) < head_pad) { + bus->sdiodev->bus_if->tx_realloc++; + head_pad = 0; + if (skb_cow(pkt, head_pad)) + return -ENOMEM; + } + skb_push(pkt, head_pad); + dat_buf = (u8 *)(pkt->data); + memset(dat_buf, 0, head_pad + bus->tx_hdrlen); + } + return head_pad; +} + /** * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for * bus layer usage. @@ -1880,32 +1918,40 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus) /* bit mask of data length chopped from the previous packet */ #define ALIGN_SKB_CHOP_LEN_MASK 0x7fff -static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev, +static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, struct sk_buff_head *pktq, - struct sk_buff *pkt, uint chan) + struct sk_buff *pkt, u16 total_len) { + struct brcmf_sdio_dev *sdiodev; struct sk_buff *pkt_pad; - u16 tail_pad, tail_chop, sg_align; + u16 tail_pad, tail_chop, chain_pad; unsigned int blksize; - u8 *dat_buf; - int ntail; + bool lastfrm; + int ntail, ret; + sdiodev = bus->sdiodev; blksize = sdiodev->func[SDIO_FUNC_2]->cur_blksize; - sg_align = 4; - if (sdiodev->pdata && sdiodev->pdata->sd_sgentry_align > 4) - sg_align = sdiodev->pdata->sd_sgentry_align; /* sg entry alignment should be a divisor of block size */ - WARN_ON(blksize % sg_align); + WARN_ON(blksize % bus->sgentry_align); /* Check tail padding */ - pkt_pad = NULL; - tail_chop = pkt->len % sg_align; - tail_pad = sg_align - tail_chop; - tail_pad += blksize - (pkt->len + tail_pad) % blksize; + lastfrm = skb_queue_is_last(pktq, pkt); + tail_pad = 0; + tail_chop = pkt->len % bus->sgentry_align; + if (tail_chop) + tail_pad = bus->sgentry_align - tail_chop; + chain_pad = (total_len + tail_pad) % blksize; + if (lastfrm && chain_pad) + tail_pad += blksize - chain_pad; if (skb_tailroom(pkt) < tail_pad && pkt->len > blksize) { - pkt_pad = brcmu_pkt_buf_get_skb(tail_pad + tail_chop); + pkt_pad = bus->txglom_sgpad; + if (pkt_pad == NULL) + brcmu_pkt_buf_get_skb(tail_pad + tail_chop); if (pkt_pad == NULL) return -ENOMEM; + ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad); + if (unlikely(ret < 0)) + return ret; memcpy(pkt_pad->data, pkt->data + pkt->len - tail_chop, tail_chop); @@ -1920,14 +1966,10 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev, return -ENOMEM; if (skb_linearize(pkt)) return -ENOMEM; - dat_buf = (u8 *)(pkt->data); __skb_put(pkt, tail_pad); } - if (pkt_pad) - return pkt->len + tail_chop; - else - return pkt->len - tail_pad; + return tail_pad; } /** @@ -1946,58 +1988,66 @@ static int brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, uint chan) { - u16 head_pad, head_align; + u16 head_pad, total_len; struct sk_buff *pkt_next; - u8 *dat_buf; - int err; + u8 txseq; + int ret; struct brcmf_sdio_hdrinfo hd_info = {0}; - /* SDIO ADMA requires at least 32 bit alignment */ - head_align = 4; - if (bus->sdiodev->pdata && bus->sdiodev->pdata->sd_head_align > 4) - head_align = bus->sdiodev->pdata->sd_head_align; + txseq = bus->tx_seq; + total_len = 0; + skb_queue_walk(pktq, pkt_next) { + /* alignment packet inserted in previous + * loop cycle can be skipped as it is + * already properly aligned and does not + * need an sdpcm header. + */ + if (*(u32 *)(pkt_next->cb) & ALIGN_SKB_FLAG) + continue; - pkt_next = pktq->next; - dat_buf = (u8 *)(pkt_next->data); + /* align packet data pointer */ + ret = brcmf_sdio_txpkt_hdalign(bus, pkt_next); + if (ret < 0) + return ret; + head_pad = (u16)ret; + if (head_pad) + memset(pkt_next->data, 0, head_pad + bus->tx_hdrlen); - /* Check head padding */ - head_pad = ((unsigned long)dat_buf % head_align); - if (head_pad) { - if (skb_headroom(pkt_next) < head_pad) { - bus->sdiodev->bus_if->tx_realloc++; - head_pad = 0; - if (skb_cow(pkt_next, head_pad)) - return -ENOMEM; - } - skb_push(pkt_next, head_pad); - dat_buf = (u8 *)(pkt_next->data); - memset(dat_buf, 0, head_pad + bus->tx_hdrlen); - } + total_len += pkt_next->len; - if (bus->sdiodev->sg_support && pktq->qlen > 1) { - err = brcmf_sdio_txpkt_prep_sg(bus->sdiodev, pktq, - pkt_next, chan); - if (err < 0) - return err; - hd_info.len = (u16)err; - } else { hd_info.len = pkt_next->len; - } - - hd_info.channel = chan; - hd_info.dat_offset = head_pad + bus->tx_hdrlen; - - /* Now fill the header */ - brcmf_sdio_hdpack(bus, dat_buf, &hd_info); - - if (BRCMF_BYTES_ON() && - ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || - (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) - brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, "Tx Frame:\n"); - else if (BRCMF_HDRS_ON()) - brcmf_dbg_hex_dump(true, pkt_next, head_pad + bus->tx_hdrlen, - "Tx Header:\n"); + hd_info.lastfrm = skb_queue_is_last(pktq, pkt_next); + if (bus->txglom && pktq->qlen > 1) { + ret = brcmf_sdio_txpkt_prep_sg(bus, pktq, + pkt_next, total_len); + if (ret < 0) + return ret; + hd_info.tail_pad = (u16)ret; + total_len += (u16)ret; + } + hd_info.channel = chan; + hd_info.dat_offset = head_pad + bus->tx_hdrlen; + hd_info.seq_num = txseq++; + + /* Now fill the header */ + brcmf_sdio_hdpack(bus, pkt_next->data, &hd_info); + + if (BRCMF_BYTES_ON() && + ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || + (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) + brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, + "Tx Frame:\n"); + else if (BRCMF_HDRS_ON()) + brcmf_dbg_hex_dump(true, pkt_next, + head_pad + bus->tx_hdrlen, + "Tx Header:\n"); + } + /* Hardware length tag of the first packet should be total + * length of the chain (including padding) + */ + if (bus->txglom) + brcmf_sdio_update_hwhdr(pktq->next->data, total_len); return 0; } @@ -2015,6 +2065,7 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) { u8 *hdr; u32 dat_offset; + u16 tail_pad; u32 dummy_flags, chop_len; struct sk_buff *pkt_next, *tmp, *pkt_prev; @@ -2024,42 +2075,41 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK; if (chop_len) { pkt_prev = pkt_next->prev; - memcpy(pkt_prev->data + pkt_prev->len, - pkt_next->data, chop_len); skb_put(pkt_prev, chop_len); } __skb_unlink(pkt_next, pktq); brcmu_pkt_buf_free_skb(pkt_next); } else { - hdr = pkt_next->data + SDPCM_HWHDR_LEN; + hdr = pkt_next->data + bus->tx_hdrlen - SDPCM_SWHDR_LEN; dat_offset = le32_to_cpu(*(__le32 *)hdr); dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT; skb_pull(pkt_next, dat_offset); + if (bus->txglom) { + tail_pad = le16_to_cpu(*(__le16 *)(hdr - 2)); + skb_trim(pkt_next, pkt_next->len - tail_pad); + } } } } /* Writes a HW/SW header into the packet and sends it. */ /* Assumes: (a) header space already there, (b) caller holds lock */ -static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, - uint chan) +static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, + uint chan) { int ret; int i; - struct sk_buff_head localq; + struct sk_buff *pkt_next, *tmp; brcmf_dbg(TRACE, "Enter\n"); - __skb_queue_head_init(&localq); - __skb_queue_tail(&localq, pkt); - ret = brcmf_sdio_txpkt_prep(bus, &localq, chan); + ret = brcmf_sdio_txpkt_prep(bus, pktq, chan); if (ret) goto done; sdio_claim_host(bus->sdiodev->func[1]); - ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, &localq); + ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq); bus->sdcnt.f2txdata++; if (ret < 0) { @@ -2068,57 +2118,71 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, ret); bus->sdcnt.tx_sderrs++; - brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); bus->sdcnt.f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, NULL); - lo = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, NULL); + hi = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->sdcnt.f1regdata += 2; if ((hi == 0) && (lo == 0)) break; } - } sdio_release_host(bus->sdiodev->func[1]); - if (ret == 0) - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; done: - brcmf_sdio_txpkt_postp(bus, &localq); - __skb_dequeue_tail(&localq); - brcmf_txcomplete(bus->sdiodev->dev, pkt, ret == 0); + brcmf_sdio_txpkt_postp(bus, pktq); + if (ret == 0) + bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP; + skb_queue_walk_safe(pktq, pkt_next, tmp) { + __skb_unlink(pkt_next, pktq); + brcmf_txcomplete(bus->sdiodev->dev, pkt_next, ret == 0); + } return ret; } -static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) +static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) { struct sk_buff *pkt; + struct sk_buff_head pktq; u32 intstatus = 0; - int ret = 0, prec_out; + int ret = 0, prec_out, i; uint cnt = 0; - u8 tx_prec_map; + u8 tx_prec_map, pkt_num; brcmf_dbg(TRACE, "Enter\n"); tx_prec_map = ~bus->flowcontrol; /* Send frames until the limit or some other event */ - for (cnt = 0; (cnt < maxframes) && data_ok(bus); cnt++) { + for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { + pkt_num = 1; + __skb_queue_head_init(&pktq); + if (bus->txglom) + pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, + brcmf_sdio_txglomsz); + pkt_num = min_t(u32, pkt_num, + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)); spin_lock_bh(&bus->txqlock); - pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out); - if (pkt == NULL) { - spin_unlock_bh(&bus->txqlock); - break; + for (i = 0; i < pkt_num; i++) { + pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, + &prec_out); + if (pkt == NULL) + break; + __skb_queue_tail(&pktq, pkt); } spin_unlock_bh(&bus->txqlock); + if (i == 0) + break; - ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL); + ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); + cnt += i; /* In poll mode, need to check for other events */ if (!bus->intr && cnt) { @@ -2146,7 +2210,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) return cnt; } -static void brcmf_sdbrcm_bus_stop(struct device *dev) +static void brcmf_sdio_bus_stop(struct device *dev) { u32 local_hostintmask; u8 saveclk; @@ -2163,62 +2227,57 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) bus->watchdog_tsk = NULL; } - sdio_claim_host(bus->sdiodev->func[1]); - - /* Enable clock for device interrupts */ - brcmf_sdbrcm_bus_sleep(bus, false, false); + if (bus_if->state == BRCMF_BUS_DOWN) { + sdio_claim_host(sdiodev->func[1]); + + /* Enable clock for device interrupts */ + brcmf_sdio_bus_sleep(bus, false, false); + + /* Disable and clear interrupts at the chip level also */ + w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); + local_hostintmask = bus->hostintmask; + bus->hostintmask = 0; + + /* Force backplane clocks to assure F2 interrupt propagates */ + saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if (!err) + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); + if (err) + brcmf_err("Failed to force clock for F2: err %d\n", + err); - /* Disable and clear interrupts at the chip level also */ - w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); - local_hostintmask = bus->hostintmask; - bus->hostintmask = 0; + /* Turn off the bus (F2), free any pending packets */ + brcmf_dbg(INTR, "disable SDIO interrupts\n"); + sdio_disable_func(sdiodev->func[SDIO_FUNC_2]); - /* Change our idea of bus state */ - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; + /* Clear any pending interrupts now that F2 is disabled */ + w_sdreg32(bus, local_hostintmask, + offsetof(struct sdpcmd_regs, intstatus)); - /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); - if (!err) { - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + sdio_release_host(sdiodev->func[1]); } - if (err) - brcmf_err("Failed to force clock for F2: err %d\n", err); - - /* Turn off the bus (F2), free any pending packets */ - brcmf_dbg(INTR, "disable SDIO interrupts\n"); - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, - NULL); - - /* Clear any pending interrupts now that F2 is disabled */ - w_sdreg32(bus, local_hostintmask, - offsetof(struct sdpcmd_regs, intstatus)); - - /* Turn off the backplane clock (only) */ - brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); - sdio_release_host(bus->sdiodev->func[1]); - /* Clear the data packet queues */ brcmu_pktq_flush(&bus->txq, true, NULL, NULL); /* Clear any held glomming stuff */ if (bus->glomd) brcmu_pkt_buf_free_skb(bus->glomd); - brcmf_sdbrcm_free_glom(bus); + brcmf_sdio_free_glom(bus); /* Clear rx control and wake any waiters */ spin_lock_bh(&bus->rxctl_lock); bus->rxlen = 0; spin_unlock_bh(&bus->rxctl_lock); - brcmf_sdbrcm_dcmd_resp_wake(bus); + brcmf_sdio_dcmd_resp_wake(bus); /* Reset some F2 state stuff */ bus->rxskip = false; bus->tx_seq = bus->rx_seq = 0; } -static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus) +static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus) { unsigned long flags; @@ -2243,7 +2302,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) addr = bus->ci->c_inf[idx].base + offsetof(struct sdpcmd_regs, intstatus); - ret = brcmf_sdio_regrw_helper(bus->sdiodev, addr, &val, false); + val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret); bus->sdcnt.f1regdata++; if (ret != 0) val = 0; @@ -2253,7 +2312,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) /* Clear interrupts */ if (val) { - ret = brcmf_sdio_regrw_helper(bus->sdiodev, addr, &val, true); + brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret); bus->sdcnt.f1regdata++; } @@ -2267,7 +2326,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) return ret; } -static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) +static void brcmf_sdio_dpc(struct brcmf_sdio *bus) { u32 newstatus = 0; unsigned long intstatus; @@ -2286,48 +2345,29 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) #ifdef DEBUG /* Check for inconsistent device control */ - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); - if (err) { - brcmf_err("error reading DEVCTL: %d\n", err); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - } + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); #endif /* DEBUG */ /* Read CSR, if clock on switch to AVAIL, else ignore */ - clkctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); - if (err) { - brcmf_err("error reading CSR: %d\n", - err); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - } + clkctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n", devctl, clkctl); if (SBSDIO_HTAV(clkctl)) { - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); - if (err) { - brcmf_err("error reading DEVCTL: %d\n", - err); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - } + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - devctl, &err); - if (err) { - brcmf_err("error writing DEVCTL: %d\n", - err); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - } + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); bus->clkstate = CLK_AVAIL; } } /* Make sure backplane clock is on */ - brcmf_sdbrcm_bus_sleep(bus, false, true); + brcmf_sdio_bus_sleep(bus, false, true); /* Pending interrupt indicates new device status */ if (atomic_read(&bus->ipend) > 0) { @@ -2358,7 +2398,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) /* Handle host mailbox indication */ if (intstatus & I_HMB_HOST_INT) { intstatus &= ~I_HMB_HOST_INT; - intstatus |= brcmf_sdbrcm_hostmail(bus); + intstatus |= brcmf_sdio_hostmail(bus); } sdio_release_host(bus->sdiodev->func[1]); @@ -2403,16 +2443,15 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) set_bit(n, (unsigned long *)&bus->intstatus.counter); } - brcmf_sdbrcm_clrintr(bus); + brcmf_sdio_clrintr(bus); if (data_ok(bus) && bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL)) { int i; sdio_claim_host(bus->sdiodev->func[1]); - err = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, bus->ctrl_frame_buf, - (u32) bus->ctrl_frame_len); + err = brcmf_sdiod_send_buf(bus->sdiodev, bus->ctrl_frame_buf, + (u32)bus->ctrl_frame_len); if (err < 0) { /* On failure, abort the command and @@ -2421,20 +2460,20 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) err); bus->sdcnt.tx_sderrs++; - brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, &err); bus->sdcnt.f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, - &err); - lo = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, - &err); + hi = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, + &err); + lo = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, + &err); bus->sdcnt.f1regdata += 2; if ((hi == 0) && (lo == 0)) break; @@ -2445,7 +2484,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) } sdio_release_host(bus->sdiodev->func[1]); bus->ctrl_frame_stat = false; - brcmf_sdbrcm_wait_event_wakeup(bus); + brcmf_sdio_wait_event_wakeup(bus); } /* Send queued frames (limit 1 if rx may still be pending) */ else if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && @@ -2453,13 +2492,12 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) && data_ok(bus)) { framecnt = bus->rxpending ? min(txlimit, bus->txminmax) : txlimit; - framecnt = brcmf_sdbrcm_sendfromq(bus, framecnt); + framecnt = brcmf_sdio_sendfromq(bus, framecnt); txlimit -= framecnt; } - if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) { + if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) { brcmf_err("failed backplane access over SDIO, halting operation\n"); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; atomic_set(&bus->intstatus, 0); } else if (atomic_read(&bus->intstatus) || atomic_read(&bus->ipend) > 0 || @@ -2475,12 +2513,12 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) bus->activity = false; brcmf_dbg(SDIO, "idle state\n"); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_bus_sleep(bus, true, false); + brcmf_sdio_bus_sleep(bus, true, false); sdio_release_host(bus->sdiodev->func[1]); } } -static struct pktq *brcmf_sdbrcm_bus_gettxq(struct device *dev) +static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev) { struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; @@ -2489,7 +2527,7 @@ static struct pktq *brcmf_sdbrcm_bus_gettxq(struct device *dev) return &bus->txq; } -static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) +static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) { int ret = -EBADE; uint datalen, prec; @@ -2545,7 +2583,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) #ifdef DEBUG #define CONSOLE_LINE_MAX 192 -static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus) +static int brcmf_sdio_readconsole(struct brcmf_sdio *bus) { struct brcmf_console *c = &bus->console; u8 line[CONSOLE_LINE_MAX], ch; @@ -2558,8 +2596,8 @@ static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus) /* Read console log struct */ addr = bus->console_addr + offsetof(struct rte_console, log_le); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le, - sizeof(c->log_le)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le, + sizeof(c->log_le)); if (rv < 0) return rv; @@ -2584,7 +2622,7 @@ static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus) /* Read the console buffer */ addr = le32_to_cpu(c->log_le.buf); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize); if (rv < 0) return rv; @@ -2622,14 +2660,13 @@ break2: } #endif /* DEBUG */ -static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) +static int brcmf_sdio_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) { int i; int ret; bus->ctrl_frame_stat = false; - ret = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, frame, len); + ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len); if (ret < 0) { /* On failure, abort the command and terminate the frame */ @@ -2637,18 +2674,18 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) ret); bus->sdcnt.tx_sderrs++; - brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); bus->sdcnt.f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, NULL); - lo = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, NULL); + hi = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->sdcnt.f1regdata += 2; if (hi == 0 && lo == 0) break; @@ -2662,10 +2699,10 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) } static int -brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) +brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) { u8 *frame; - u16 len; + u16 len, pad; uint retries = 0; u8 doff = 0; int ret = -1; @@ -2681,41 +2718,45 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) len = (msglen += bus->tx_hdrlen); /* Add alignment padding (optional for ctl frames) */ - doff = ((unsigned long)frame % BRCMF_SDALIGN); + doff = ((unsigned long)frame % bus->head_align); if (doff) { frame -= doff; len += doff; msglen += doff; memset(frame, 0, doff + bus->tx_hdrlen); } - /* precondition: doff < BRCMF_SDALIGN */ + /* precondition: doff < bus->head_align */ doff += bus->tx_hdrlen; /* Round send length to next SDIO block */ + pad = 0; if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { - u16 pad = bus->blocksize - (len % bus->blocksize); - if ((pad <= bus->roundup) && (pad < bus->blocksize)) - len += pad; - } else if (len % BRCMF_SDALIGN) { - len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN); + pad = bus->blocksize - (len % bus->blocksize); + if ((pad > bus->roundup) || (pad >= bus->blocksize)) + pad = 0; + } else if (len % bus->head_align) { + pad = bus->head_align - (len % bus->head_align); } - - /* Satisfy length-alignment requirements */ - if (len & (ALIGNMENT - 1)) - len = roundup(len, ALIGNMENT); + len += pad; /* precondition: IS_ALIGNED((unsigned long)frame, 2) */ /* Make sure backplane clock is on */ sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_bus_sleep(bus, false, false); + brcmf_sdio_bus_sleep(bus, false, false); sdio_release_host(bus->sdiodev->func[1]); hd_info.len = (u16)msglen; hd_info.channel = SDPCM_CONTROL_CHANNEL; hd_info.dat_offset = doff; + hd_info.seq_num = bus->tx_seq; + hd_info.lastfrm = true; + hd_info.tail_pad = pad; brcmf_sdio_hdpack(bus, frame, &hd_info); + if (bus->txglom) + brcmf_sdio_update_hwhdr(frame, len); + if (!data_ok(bus)) { brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n", bus->tx_max, bus->tx_seq); @@ -2746,7 +2787,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) do { sdio_claim_host(bus->sdiodev->func[1]); - ret = brcmf_tx_frame(bus, frame, len); + ret = brcmf_sdio_tx_frame(bus, frame, len); sdio_release_host(bus->sdiodev->func[1]); } while (ret < 0 && retries++ < TXRETRIES); } @@ -2756,7 +2797,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) bus->activity = false; sdio_claim_host(bus->sdiodev->func[1]); brcmf_dbg(INFO, "idle\n"); - brcmf_sdbrcm_clkctl(bus, CLK_NONE, true); + brcmf_sdio_clkctl(bus, CLK_NONE, true); sdio_release_host(bus->sdiodev->func[1]); } @@ -2790,8 +2831,8 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, * address of sdpcm_shared structure */ sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_bus_sleep(bus, false, false); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); + brcmf_sdio_bus_sleep(bus, false, false); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); sdio_release_host(bus->sdiodev->func[1]); if (rv < 0) return rv; @@ -2811,8 +2852,8 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, } /* Read hndrte_shared structure */ - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, - sizeof(struct sdpcm_shared_le)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, + sizeof(struct sdpcm_shared_le)); if (rv < 0) return rv; @@ -2848,22 +2889,22 @@ static int brcmf_sdio_dump_console(struct brcmf_sdio *bus, /* obtain console information from device memory */ addr = sh->console_addr + offsetof(struct rte_console, log_le); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, - (u8 *)&sh_val, sizeof(u32)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); if (rv < 0) return rv; console_ptr = le32_to_cpu(sh_val); addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, - (u8 *)&sh_val, sizeof(u32)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); if (rv < 0) return rv; console_size = le32_to_cpu(sh_val); addr = sh->console_addr + offsetof(struct rte_console, log_le.idx); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, - (u8 *)&sh_val, sizeof(u32)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); if (rv < 0) return rv; console_index = le32_to_cpu(sh_val); @@ -2877,8 +2918,8 @@ static int brcmf_sdio_dump_console(struct brcmf_sdio *bus, /* obtain the console data from device */ conbuf[console_size] = '\0'; - rv = brcmf_sdio_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf, - console_size); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf, + console_size); if (rv < 0) goto done; @@ -2915,8 +2956,8 @@ static int brcmf_sdio_trap_info(struct brcmf_sdio *bus, struct sdpcm_shared *sh, return 0; } - error = brcmf_sdio_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr, - sizeof(struct brcmf_trap_info)); + error = brcmf_sdiod_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr, + sizeof(struct brcmf_trap_info)); if (error < 0) return error; @@ -2959,14 +3000,14 @@ static int brcmf_sdio_assert_info(struct brcmf_sdio *bus, sdio_claim_host(bus->sdiodev->func[1]); if (sh->assert_file_addr != 0) { - error = brcmf_sdio_ramrw(bus->sdiodev, false, - sh->assert_file_addr, (u8 *)file, 80); + error = brcmf_sdiod_ramrw(bus->sdiodev, false, + sh->assert_file_addr, (u8 *)file, 80); if (error < 0) return error; } if (sh->assert_exp_addr != 0) { - error = brcmf_sdio_ramrw(bus->sdiodev, false, - sh->assert_exp_addr, (u8 *)expr, 80); + error = brcmf_sdiod_ramrw(bus->sdiodev, false, + sh->assert_exp_addr, (u8 *)expr, 80); if (error < 0) return error; } @@ -2978,7 +3019,7 @@ static int brcmf_sdio_assert_info(struct brcmf_sdio *bus, return simple_read_from_buffer(data, count, &pos, buf, res); } -static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus) +static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) { int error; struct sdpcm_shared sh; @@ -2999,8 +3040,8 @@ static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus) return 0; } -static int brcmf_sdbrcm_died_dump(struct brcmf_sdio *bus, char __user *data, - size_t count, loff_t *ppos) +static int brcmf_sdio_died_dump(struct brcmf_sdio *bus, char __user *data, + size_t count, loff_t *ppos) { int error = 0; struct sdpcm_shared sh; @@ -3041,7 +3082,7 @@ static ssize_t brcmf_sdio_forensic_read(struct file *f, char __user *data, struct brcmf_sdio *bus = f->private_data; int res; - res = brcmf_sdbrcm_died_dump(bus, data, count, ppos); + res = brcmf_sdio_died_dump(bus, data, count, ppos); if (res > 0) *ppos += res; return (ssize_t)res; @@ -3066,7 +3107,7 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus) brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt); } #else -static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus) +static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) { return 0; } @@ -3077,7 +3118,7 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus) #endif /* DEBUG */ static int -brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) +brcmf_sdio_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) { int timeleft; uint rxlen = 0; @@ -3090,7 +3131,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) brcmf_dbg(TRACE, "Enter\n"); /* Wait until control frame is available */ - timeleft = brcmf_sdbrcm_dcmd_resp_wait(bus, &bus->rxlen, &pending); + timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending); spin_lock_bh(&bus->rxctl_lock); rxlen = bus->rxlen; @@ -3107,13 +3148,13 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) rxlen, msglen); } else if (timeleft == 0) { brcmf_err("resumed on timeout\n"); - brcmf_sdbrcm_checkdied(bus); + brcmf_sdio_checkdied(bus); } else if (pending) { brcmf_dbg(CTL, "cancelled\n"); return -ERESTARTSYS; } else { brcmf_dbg(CTL, "resumed for unknown reason?\n"); - brcmf_sdbrcm_checkdied(bus); + brcmf_sdio_checkdied(bus); } if (rxlen) @@ -3124,46 +3165,69 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) return rxlen ? (int)rxlen : -ETIMEDOUT; } -static bool brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) +#ifdef DEBUG +static bool +brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr, + u8 *ram_data, uint ram_sz) { - struct chip_info *ci = bus->ci; - - /* To enter download state, disable ARM and reset SOCRAM. - * To exit download state, simply reset ARM (default is RAM boot). - */ - if (enter) { - bus->alp_only = true; + char *ram_cmp; + int err; + bool ret = true; + int address; + int offset; + int len; - brcmf_sdio_chip_enter_download(bus->sdiodev, ci); - } else { - if (!brcmf_sdio_chip_exit_download(bus->sdiodev, ci, bus->vars, - bus->varsz)) - return false; + /* read back and verify */ + brcmf_dbg(INFO, "Compare RAM dl & ul at 0x%08x; size=%d\n", ram_addr, + ram_sz); + ram_cmp = kmalloc(MEMBLOCK, GFP_KERNEL); + /* do not proceed while no memory but */ + if (!ram_cmp) + return true; - /* Allow HT Clock now that the ARM is running. */ - bus->alp_only = false; - - bus->sdiodev->bus_if->state = BRCMF_BUS_LOAD; + address = ram_addr; + offset = 0; + while (offset < ram_sz) { + len = ((offset + MEMBLOCK) < ram_sz) ? MEMBLOCK : + ram_sz - offset; + err = brcmf_sdiod_ramrw(sdiodev, false, address, ram_cmp, len); + if (err) { + brcmf_err("error %d on reading %d membytes at 0x%08x\n", + err, len, address); + ret = false; + break; + } else if (memcmp(ram_cmp, &ram_data[offset], len)) { + brcmf_err("Downloaded RAM image is corrupted, block offset is %d, len is %d\n", + offset, len); + ret = false; + break; + } + offset += len; + address += len; } + kfree(ram_cmp); + + return ret; +} +#else /* DEBUG */ +static bool +brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr, + u8 *ram_data, uint ram_sz) +{ return true; } +#endif /* DEBUG */ -static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus) +static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus, + const struct firmware *fw) { - const struct firmware *fw; int err; int offset; int address; int len; - fw = brcmf_sdbrcm_get_fw(bus, BRCMF_FIRMWARE_BIN); - if (fw == NULL) - return -ENOENT; - - if (brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_ARM_CR4) != - BRCMF_MAX_CORENUM) - memcpy(&bus->ci->rst_vec, fw->data, sizeof(bus->ci->rst_vec)); + brcmf_dbg(TRACE, "Enter\n"); err = 0; offset = 0; @@ -3171,148 +3235,113 @@ static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus) while (offset < fw->size) { len = ((offset + MEMBLOCK) < fw->size) ? MEMBLOCK : fw->size - offset; - err = brcmf_sdio_ramrw(bus->sdiodev, true, address, - (u8 *)&fw->data[offset], len); + err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, + (u8 *)&fw->data[offset], len); if (err) { brcmf_err("error %d on writing %d membytes at 0x%08x\n", err, len, address); - goto failure; + return err; } offset += len; address += len; } - -failure: - release_firmware(fw); + if (!err) + if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase, + (u8 *)fw->data, fw->size)) + err = -EIO; return err; } -/* - * ProcessVars:Takes a buffer of "<var>=<value>\n" lines read from a file - * and ending in a NUL. - * Removes carriage returns, empty lines, comment lines, and converts - * newlines to NULs. - * Shortens buffer as needed and pads with NULs. End of buffer is marked - * by two NULs. -*/ - -static int brcmf_process_nvram_vars(struct brcmf_sdio *bus, - const struct firmware *nv) -{ - char *varbuf; - char *dp; - bool findNewline; - int column; - int ret = 0; - uint buf_len, n, len; - - len = nv->size; - varbuf = vmalloc(len); - if (!varbuf) - return -ENOMEM; - - memcpy(varbuf, nv->data, len); - dp = varbuf; - - findNewline = false; - column = 0; - - for (n = 0; n < len; n++) { - if (varbuf[n] == 0) - break; - if (varbuf[n] == '\r') - continue; - if (findNewline && varbuf[n] != '\n') - continue; - findNewline = false; - if (varbuf[n] == '#') { - findNewline = true; - continue; - } - if (varbuf[n] == '\n') { - if (column == 0) - continue; - *dp++ = 0; - column = 0; - continue; - } - *dp++ = varbuf[n]; - column++; - } - buf_len = dp - varbuf; - while (dp < varbuf + n) - *dp++ = 0; - - kfree(bus->vars); - /* roundup needed for download to device */ - bus->varsz = roundup(buf_len + 1, 4); - bus->vars = kmalloc(bus->varsz, GFP_KERNEL); - if (bus->vars == NULL) { - bus->varsz = 0; - ret = -ENOMEM; - goto err; - } +static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus, + const struct firmware *nv) +{ + void *vars; + u32 varsz; + int address; + int err; - /* copy the processed variables and add null termination */ - memcpy(bus->vars, varbuf, buf_len); - bus->vars[buf_len] = 0; -err: - vfree(varbuf); - return ret; -} + brcmf_dbg(TRACE, "Enter\n"); -static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus) -{ - const struct firmware *nv; - int ret; + vars = brcmf_nvram_strip(nv, &varsz); - nv = brcmf_sdbrcm_get_fw(bus, BRCMF_FIRMWARE_NVRAM); - if (nv == NULL) - return -ENOENT; + if (vars == NULL) + return -EINVAL; - ret = brcmf_process_nvram_vars(bus, nv); + address = bus->ci->ramsize - varsz + bus->ci->rambase; + err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, vars, varsz); + if (err) + brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n", + err, varsz, address); + else if (!brcmf_sdio_verifymemory(bus->sdiodev, address, vars, varsz)) + err = -EIO; - release_firmware(nv); + brcmf_nvram_free(vars); - return ret; + return err; } -static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus) +static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) { - int bcmerror = -1; + int bcmerror = -EFAULT; + const struct firmware *fw; + u32 rstvec; + + sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); /* Keep arm in reset */ - if (!brcmf_sdbrcm_download_state(bus, true)) { - brcmf_err("error placing ARM core in reset\n"); + brcmf_sdio_chip_enter_download(bus->sdiodev, bus->ci); + + fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN); + if (fw == NULL) { + bcmerror = -ENOENT; goto err; } - if (brcmf_sdbrcm_download_code_file(bus)) { + rstvec = get_unaligned_le32(fw->data); + brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec); + + bcmerror = brcmf_sdio_download_code_file(bus, fw); + release_firmware(fw); + if (bcmerror) { brcmf_err("dongle image file download failed\n"); goto err; } - if (brcmf_sdbrcm_download_nvram(bus)) { + fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_NVRAM); + if (fw == NULL) { + bcmerror = -ENOENT; + goto err; + } + + bcmerror = brcmf_sdio_download_nvram(bus, fw); + release_firmware(fw); + if (bcmerror) { brcmf_err("dongle nvram file download failed\n"); goto err; } /* Take arm out of reset */ - if (!brcmf_sdbrcm_download_state(bus, false)) { + if (!brcmf_sdio_chip_exit_download(bus->sdiodev, bus->ci, rstvec)) { brcmf_err("error getting out of ARM core reset\n"); goto err; } + /* Allow HT Clock now that the ARM is running. */ + brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_LOAD); bcmerror = 0; err: + brcmf_sdio_clkctl(bus, CLK_SDONLY, false); + sdio_release_host(bus->sdiodev->func[1]); return bcmerror; } -static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus) +static bool brcmf_sdio_sr_capable(struct brcmf_sdio *bus) { - u32 addr, reg; + u32 addr, reg, pmu_cc3_mask = ~0; + int err; brcmf_dbg(TRACE, "Enter\n"); @@ -3320,49 +3349,61 @@ static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus) if (bus->ci->pmurev < 17) return false; - /* read PMU chipcontrol register 3*/ - addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr); - brcmf_sdio_regwl(bus->sdiodev, addr, 3, NULL); - addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data); - reg = brcmf_sdio_regrl(bus->sdiodev, addr, NULL); + switch (bus->ci->chip) { + case BCM43241_CHIP_ID: + case BCM4335_CHIP_ID: + case BCM4339_CHIP_ID: + /* read PMU chipcontrol register 3 */ + addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr); + brcmf_sdiod_regwl(bus->sdiodev, addr, 3, NULL); + addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data); + reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL); + return (reg & pmu_cc3_mask) != 0; + default: + addr = CORE_CC_REG(bus->ci->c_inf[0].base, pmucapabilities_ext); + reg = brcmf_sdiod_regrl(bus->sdiodev, addr, &err); + if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0) + return false; - return (bool)reg; + addr = CORE_CC_REG(bus->ci->c_inf[0].base, retention_ctl); + reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL); + return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK | + PMU_RCTL_LOGIC_DISABLE_MASK)) == 0; + } } -static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus) +static void brcmf_sdio_sr_init(struct brcmf_sdio *bus) { int err = 0; u8 val; brcmf_dbg(TRACE, "Enter\n"); - val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, - &err); + val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err); if (err) { brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n"); return; } val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, - val, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err); if (err) { brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n"); return; } /* Add CMD14 Support */ - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, - (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | - SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT), - &err); + brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, + (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | + SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT), + &err); if (err) { brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n"); return; } - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - SBSDIO_FORCE_HT, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_FORCE_HT, &err); if (err) { brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n"); return; @@ -3374,7 +3415,7 @@ static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus) } /* enable KSO bit */ -static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) +static int brcmf_sdio_kso_init(struct brcmf_sdio *bus) { u8 val; int err = 0; @@ -3385,8 +3426,7 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) if (bus->ci->c_inf[1].rev < 12) return 0; - val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - &err); + val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); if (err) { brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n"); return err; @@ -3395,8 +3435,8 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) { val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - val, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + val, &err); if (err) { brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n"); return err; @@ -3407,31 +3447,70 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) } -static bool -brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus) +static int brcmf_sdio_bus_preinit(struct device *dev) { - bool ret; - - sdio_claim_host(bus->sdiodev->func[1]); - - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + uint pad_size; + u32 value; + u8 idx; + int err; - ret = _brcmf_sdbrcm_download_firmware(bus) == 0; + /* the commands below use the terms tx and rx from + * a device perspective, ie. bus:txglom affects the + * bus transfers from device to host. + */ + idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); + if (bus->ci->c_inf[idx].rev < 12) { + /* for sdio core rev < 12, disable txgloming */ + value = 0; + err = brcmf_iovar_data_set(dev, "bus:txglom", &value, + sizeof(u32)); + } else { + /* otherwise, set txglomalign */ + value = 4; + if (sdiodev->pdata) + value = sdiodev->pdata->sd_sgentry_align; + /* SDIO ADMA requires at least 32 bit alignment */ + value = max_t(u32, value, 4); + err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value, + sizeof(u32)); + } - brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); + if (err < 0) + goto done; - sdio_release_host(bus->sdiodev->func[1]); + bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; + if (sdiodev->sg_support) { + bus->txglom = false; + value = 1; + pad_size = bus->sdiodev->func[2]->cur_blksize << 1; + bus->txglom_sgpad = brcmu_pkt_buf_get_skb(pad_size); + if (!bus->txglom_sgpad) + brcmf_err("allocating txglom padding skb failed, reduced performance\n"); + + err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom", + &value, sizeof(u32)); + if (err < 0) { + /* bus:rxglom is allowed to fail */ + err = 0; + } else { + bus->txglom = true; + bus->tx_hdrlen += SDPCM_HWEXT_LEN; + } + } + brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen); - return ret; +done: + return err; } -static int brcmf_sdbrcm_bus_init(struct device *dev) +static int brcmf_sdio_bus_init(struct device *dev) { struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - unsigned long timeout; - u8 ready, enable; int err, ret = 0; u8 saveclk; @@ -3439,8 +3518,11 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* try to download image and nvram to the dongle */ if (bus_if->state == BRCMF_BUS_DOWN) { - if (!(brcmf_sdbrcm_download_firmware(bus))) - return -1; + bus->alp_only = true; + err = brcmf_sdio_download_firmware(bus); + if (err) + return err; + bus->alp_only = false; } if (!bus->sdiodev->bus_if->drvr) @@ -3448,21 +3530,21 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Start the watchdog timer */ bus->sdcnt.tickcnt = 0; - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); sdio_claim_host(bus->sdiodev->func[1]); /* Make sure backplane clock is on, needed to generate F2 interrupt */ - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); if (bus->clkstate != CLK_AVAIL) goto exit; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); } if (err) { brcmf_err("Failed to force clock for F2: err %d\n", err); @@ -3472,56 +3554,42 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Enable function 2 (frame transfers) */ w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, offsetof(struct sdpcmd_regs, tosbmailboxdata)); - enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2); - - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); + err = sdio_enable_func(bus->sdiodev->func[SDIO_FUNC_2]); - timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY); - ready = 0; - while (enable != ready) { - ready = brcmf_sdio_regrb(bus->sdiodev, - SDIO_CCCR_IORx, NULL); - if (time_after(jiffies, timeout)) - break; - else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50)) - /* prevent busy waiting if it takes too long */ - msleep_interruptible(20); - } - brcmf_dbg(INFO, "enable 0x%02x, ready 0x%02x\n", enable, ready); + brcmf_dbg(INFO, "enable F2: err=%d\n", err); /* If F2 successfully enabled, set core and enable interrupts */ - if (ready == enable) { + if (!err) { /* Set up the interrupt mask and enable interrupts */ bus->hostintmask = HOSTINTMASK; w_sdreg32(bus, bus->hostintmask, offsetof(struct sdpcmd_regs, hostintmask)); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err); } else { /* Disable F2 again */ - enable = SDIO_FUNC_ENABLE_1; - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); + sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); ret = -ENODEV; } - if (brcmf_sdbrcm_sr_capable(bus)) { - brcmf_sdbrcm_sr_init(bus); + if (brcmf_sdio_sr_capable(bus)) { + brcmf_sdio_sr_init(bus); } else { /* Restore previous clock setting */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - saveclk, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + saveclk, &err); } if (ret == 0) { - ret = brcmf_sdio_intr_register(bus->sdiodev); + ret = brcmf_sdiod_intr_register(bus->sdiodev); if (ret != 0) brcmf_err("intr register failed:%d\n", ret); } /* If we didn't come up, turn off backplane clock */ - if (bus_if->state != BRCMF_BUS_DATA) - brcmf_sdbrcm_clkctl(bus, CLK_NONE, false); + if (ret != 0) + brcmf_sdio_clkctl(bus, CLK_NONE, false); exit: sdio_release_host(bus->sdiodev->func[1]); @@ -3529,10 +3597,8 @@ exit: return ret; } -void brcmf_sdbrcm_isr(void *arg) +void brcmf_sdio_isr(struct brcmf_sdio *bus) { - struct brcmf_sdio *bus = (struct brcmf_sdio *) arg; - brcmf_dbg(TRACE, "Enter\n"); if (!bus) { @@ -3540,7 +3606,7 @@ void brcmf_sdbrcm_isr(void *arg) return; } - if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { + if (!brcmf_bus_ready(bus->sdiodev->bus_if)) { brcmf_err("bus is down. we have nothing to do\n"); return; } @@ -3551,7 +3617,6 @@ void brcmf_sdbrcm_isr(void *arg) else if (brcmf_sdio_intr_rstatus(bus)) { brcmf_err("failed backplane access\n"); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } /* Disable additional interrupts (is this needed now)? */ @@ -3562,7 +3627,7 @@ void brcmf_sdbrcm_isr(void *arg) queue_work(bus->brcmf_wq, &bus->datawork); } -static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) +static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) { #ifdef DEBUG struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev); @@ -3586,9 +3651,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) u8 devpend; sdio_claim_host(bus->sdiodev->func[1]); - devpend = brcmf_sdio_regrb(bus->sdiodev, - SDIO_CCCR_INTx, - NULL); + devpend = brcmf_sdiod_regrb(bus->sdiodev, + SDIO_CCCR_INTx, + NULL); sdio_release_host(bus->sdiodev->func[1]); intstatus = devpend & (INTR_STATUS_FUNC1 | @@ -3618,8 +3683,8 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->console.count -= bus->console_interval; sdio_claim_host(bus->sdiodev->func[1]); /* Make sure backplane clock is on */ - brcmf_sdbrcm_bus_sleep(bus, false, false); - if (brcmf_sdbrcm_readconsole(bus) < 0) + brcmf_sdio_bus_sleep(bus, false, false); + if (brcmf_sdio_readconsole(bus) < 0) /* stop on error */ bus->console_interval = 0; sdio_release_host(bus->sdiodev->func[1]); @@ -3633,11 +3698,11 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->idlecount = 0; if (bus->activity) { bus->activity = false; - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); } else { brcmf_dbg(SDIO, "idle\n"); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_bus_sleep(bus, true, false); + brcmf_sdio_bus_sleep(bus, true, false); sdio_release_host(bus->sdiodev->func[1]); } } @@ -3652,38 +3717,13 @@ static void brcmf_sdio_dataworker(struct work_struct *work) datawork); while (atomic_read(&bus->dpc_tskcnt)) { - brcmf_sdbrcm_dpc(bus); + brcmf_sdio_dpc(bus); atomic_dec(&bus->dpc_tskcnt); } } -static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - kfree(bus->rxbuf); - bus->rxctl = bus->rxbuf = NULL; - bus->rxlen = 0; -} - -static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - if (bus->sdiodev->bus_if->maxctl) { - bus->rxblen = - roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN), - ALIGNMENT) + BRCMF_SDALIGN; - bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC); - if (!(bus->rxbuf)) - return false; - } - - return true; -} - static bool -brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) +brcmf_sdio_probe_attach(struct brcmf_sdio *bus) { u8 clkctl = 0; int err = 0; @@ -3691,23 +3731,21 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) u32 reg_val; u32 drivestrength; - bus->alp_only = true; - sdio_claim_host(bus->sdiodev->func[1]); pr_debug("F1 signature read @0x18000000=0x%4x\n", - brcmf_sdio_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); + brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); /* * Force PLL off until brcmf_sdio_chip_attach() * programs PLL control regs */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - BRCMF_INIT_CLKCTL1, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + BRCMF_INIT_CLKCTL1, &err); if (!err) - clkctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n", @@ -3715,12 +3753,17 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) goto fail; } - if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci, regsva)) { + /* SDIO register access works so moving + * state from UNKNOWN to DOWN. + */ + brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN); + + if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) { brcmf_err("brcmf_sdio_chip_attach failed!\n"); goto fail; } - if (brcmf_sdbrcm_kso_init(bus)) { + if (brcmf_sdio_kso_init(bus)) { brcmf_err("error enabling KSO\n"); goto fail; } @@ -3739,33 +3782,33 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) } /* Set card control so an SDIO card reset does a WLAN backplane reset */ - reg_val = brcmf_sdio_regrb(bus->sdiodev, - SDIO_CCCR_BRCM_CARDCTRL, &err); + reg_val = brcmf_sdiod_regrb(bus->sdiodev, + SDIO_CCCR_BRCM_CARDCTRL, &err); if (err) goto fail; reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET; - brcmf_sdio_regwb(bus->sdiodev, - SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); + brcmf_sdiod_regwb(bus->sdiodev, + SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); if (err) goto fail; /* set PMUControl so a backplane reset does PMU state reload */ reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base, pmucontrol); - reg_val = brcmf_sdio_regrl(bus->sdiodev, - reg_addr, - &err); + reg_val = brcmf_sdiod_regrl(bus->sdiodev, + reg_addr, + &err); if (err) goto fail; reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); - brcmf_sdio_regwl(bus->sdiodev, - reg_addr, - reg_val, - &err); + brcmf_sdiod_regwl(bus->sdiodev, + reg_addr, + reg_val, + &err); if (err) goto fail; @@ -3774,9 +3817,13 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); + /* allocate header buffer */ + bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL); + if (!bus->hdrbuf) + return false; /* Locate an appropriately-aligned portion of hdrbuf */ bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0], - BRCMF_SDALIGN); + bus->head_align); /* Set the poll and/or interrupt flags */ bus->intr = true; @@ -3791,42 +3838,8 @@ fail: return false; } -static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - sdio_claim_host(bus->sdiodev->func[1]); - - /* Disable F2 to clear any intermediate frame state on the dongle */ - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, - SDIO_FUNC_ENABLE_1, NULL); - - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - bus->rxflow = false; - - /* Done with backplane-dependent accesses, can drop clock... */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); - - sdio_release_host(bus->sdiodev->func[1]); - - /* ...and initialize clock/power states */ - bus->clkstate = CLK_SDONLY; - bus->idletime = BRCMF_IDLE_INTERVAL; - bus->idleclock = BRCMF_IDLE_ACTIVE; - - /* Query the F2 block size, set roundup accordingly */ - bus->blocksize = bus->sdiodev->func[2]->cur_blksize; - bus->roundup = min(max_roundup, bus->blocksize); - - /* SR state */ - bus->sleeping = false; - bus->sr_enabled = false; - - return true; -} - static int -brcmf_sdbrcm_watchdog_thread(void *data) +brcmf_sdio_watchdog_thread(void *data) { struct brcmf_sdio *bus = (struct brcmf_sdio *)data; @@ -3836,7 +3849,7 @@ brcmf_sdbrcm_watchdog_thread(void *data) if (kthread_should_stop()) break; if (!wait_for_completion_interruptible(&bus->watchdog_wait)) { - brcmf_sdbrcm_bus_watchdog(bus); + brcmf_sdio_bus_watchdog(bus); /* Count the tick for reference */ bus->sdcnt.tickcnt++; } else @@ -3846,7 +3859,7 @@ brcmf_sdbrcm_watchdog_thread(void *data) } static void -brcmf_sdbrcm_watchdog(unsigned long data) +brcmf_sdio_watchdog(unsigned long data) { struct brcmf_sdio *bus = (struct brcmf_sdio *)data; @@ -3859,73 +3872,23 @@ brcmf_sdbrcm_watchdog(unsigned long data) } } -static void brcmf_sdbrcm_release_dongle(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - if (bus->ci) { - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); - brcmf_sdbrcm_clkctl(bus, CLK_NONE, false); - sdio_release_host(bus->sdiodev->func[1]); - brcmf_sdio_chip_detach(&bus->ci); - if (bus->vars && bus->varsz) - kfree(bus->vars); - bus->vars = NULL; - } - - brcmf_dbg(TRACE, "Disconnected\n"); -} - -/* Detach and free everything */ -static void brcmf_sdbrcm_release(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - if (bus) { - /* De-register interrupt handler */ - brcmf_sdio_intr_unregister(bus->sdiodev); - - cancel_work_sync(&bus->datawork); - if (bus->brcmf_wq) - destroy_workqueue(bus->brcmf_wq); - - if (bus->sdiodev->bus_if->drvr) { - brcmf_detach(bus->sdiodev->dev); - brcmf_sdbrcm_release_dongle(bus); - } - - brcmf_sdbrcm_release_malloc(bus); - - kfree(bus); - } - - brcmf_dbg(TRACE, "Disconnected\n"); -} - static struct brcmf_bus_ops brcmf_sdio_bus_ops = { - .stop = brcmf_sdbrcm_bus_stop, - .init = brcmf_sdbrcm_bus_init, - .txdata = brcmf_sdbrcm_bus_txdata, - .txctl = brcmf_sdbrcm_bus_txctl, - .rxctl = brcmf_sdbrcm_bus_rxctl, - .gettxq = brcmf_sdbrcm_bus_gettxq, + .stop = brcmf_sdio_bus_stop, + .preinit = brcmf_sdio_bus_preinit, + .init = brcmf_sdio_bus_init, + .txdata = brcmf_sdio_bus_txdata, + .txctl = brcmf_sdio_bus_txctl, + .rxctl = brcmf_sdio_bus_rxctl, + .gettxq = brcmf_sdio_bus_gettxq, }; -void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) +struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) { int ret; struct brcmf_sdio *bus; - struct brcmf_bus_dcmd *dlst; - u32 dngl_txglom; - u32 txglomalign = 0; - u8 idx; brcmf_dbg(TRACE, "Enter\n"); - /* We make an assumption about address window mappings: - * regsva == SI_ENUM_BASE*/ - /* Allocate private bus interface state */ bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC); if (!bus) @@ -3939,6 +3902,18 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) bus->txminmax = BRCMF_TXMINMAX; bus->tx_seq = SDPCM_SEQ_WRAP - 1; + /* platform specific configuration: + * alignments must be at least 4 bytes for ADMA + */ + bus->head_align = ALIGNMENT; + bus->sgentry_align = ALIGNMENT; + if (sdiodev->pdata) { + if (sdiodev->pdata->sd_head_align > ALIGNMENT) + bus->head_align = sdiodev->pdata->sd_head_align; + if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT) + bus->sgentry_align = sdiodev->pdata->sd_sgentry_align; + } + INIT_WORK(&bus->datawork, brcmf_sdio_dataworker); bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq"); if (bus->brcmf_wq == NULL) { @@ -3947,8 +3922,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) } /* attempt to attach to the dongle */ - if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) { - brcmf_err("brcmf_sdbrcm_probe_attach failed\n"); + if (!(brcmf_sdio_probe_attach(bus))) { + brcmf_err("brcmf_sdio_probe_attach failed\n"); goto fail; } @@ -3960,11 +3935,11 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) /* Set up the watchdog timer */ init_timer(&bus->timer); bus->timer.data = (unsigned long)bus; - bus->timer.function = brcmf_sdbrcm_watchdog; + bus->timer.function = brcmf_sdio_watchdog; /* Initialize watchdog thread */ init_completion(&bus->watchdog_wait); - bus->watchdog_tsk = kthread_run(brcmf_sdbrcm_watchdog_thread, + bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread, bus, "brcmf_watchdog"); if (IS_ERR(bus->watchdog_tsk)) { pr_warn("brcmf_watchdog thread failed to start\n"); @@ -3983,50 +3958,52 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; /* Attach to the common layer, reserve hdr space */ - ret = brcmf_attach(bus->tx_hdrlen, bus->sdiodev->dev); + ret = brcmf_attach(bus->sdiodev->dev); if (ret != 0) { brcmf_err("brcmf_attach failed\n"); goto fail; } /* Allocate buffers */ - if (!(brcmf_sdbrcm_probe_malloc(bus))) { - brcmf_err("brcmf_sdbrcm_probe_malloc failed\n"); - goto fail; + if (bus->sdiodev->bus_if->maxctl) { + bus->rxblen = + roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN), + ALIGNMENT) + bus->head_align; + bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC); + if (!(bus->rxbuf)) { + brcmf_err("rxbuf allocation failed\n"); + goto fail; + } } - if (!(brcmf_sdbrcm_probe_init(bus))) { - brcmf_err("brcmf_sdbrcm_probe_init failed\n"); - goto fail; - } + sdio_claim_host(bus->sdiodev->func[1]); + + /* Disable F2 to clear any intermediate frame state on the dongle */ + sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); + + bus->rxflow = false; + + /* Done with backplane-dependent accesses, can drop clock... */ + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + + sdio_release_host(bus->sdiodev->func[1]); + + /* ...and initialize clock/power states */ + bus->clkstate = CLK_SDONLY; + bus->idletime = BRCMF_IDLE_INTERVAL; + bus->idleclock = BRCMF_IDLE_ACTIVE; + + /* Query the F2 block size, set roundup accordingly */ + bus->blocksize = bus->sdiodev->func[2]->cur_blksize; + bus->roundup = min(max_roundup, bus->blocksize); + + /* SR state */ + bus->sleeping = false; + bus->sr_enabled = false; brcmf_sdio_debugfs_create(bus); brcmf_dbg(INFO, "completed!!\n"); - /* sdio bus core specific dcmd */ - idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - dlst = kzalloc(sizeof(struct brcmf_bus_dcmd), GFP_KERNEL); - if (dlst) { - if (bus->ci->c_inf[idx].rev < 12) { - /* for sdio core rev < 12, disable txgloming */ - dngl_txglom = 0; - dlst->name = "bus:txglom"; - dlst->param = (char *)&dngl_txglom; - dlst->param_len = sizeof(u32); - } else { - /* otherwise, set txglomalign */ - if (sdiodev->pdata) - txglomalign = sdiodev->pdata->sd_sgentry_align; - /* SDIO ADMA requires at least 32 bit alignment */ - if (txglomalign < 4) - txglomalign = 4; - dlst->name = "bus:txglomalign"; - dlst->param = (char *)&txglomalign; - dlst->param_len = sizeof(u32); - } - list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list); - } - /* if firmware path present try to download and bring up bus */ ret = brcmf_bus_start(bus->sdiodev->dev); if (ret != 0) { @@ -4037,24 +4014,55 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) return bus; fail: - brcmf_sdbrcm_release(bus); + brcmf_sdio_remove(bus); return NULL; } -void brcmf_sdbrcm_disconnect(void *ptr) +/* Detach and free everything */ +void brcmf_sdio_remove(struct brcmf_sdio *bus) { - struct brcmf_sdio *bus = (struct brcmf_sdio *)ptr; - brcmf_dbg(TRACE, "Enter\n"); - if (bus) - brcmf_sdbrcm_release(bus); + if (bus) { + /* De-register interrupt handler */ + brcmf_sdiod_intr_unregister(bus->sdiodev); + + cancel_work_sync(&bus->datawork); + if (bus->brcmf_wq) + destroy_workqueue(bus->brcmf_wq); + + if (bus->sdiodev->bus_if->drvr) { + brcmf_detach(bus->sdiodev->dev); + } + + if (bus->ci) { + if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { + sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); + /* Leave the device in state where it is + * 'quiet'. This is done by putting it in + * download_state which essentially resets + * all necessary cores. + */ + msleep(20); + brcmf_sdio_chip_enter_download(bus->sdiodev, + bus->ci); + brcmf_sdio_clkctl(bus, CLK_NONE, false); + sdio_release_host(bus->sdiodev->func[1]); + } + brcmf_sdio_chip_detach(&bus->ci); + } + + brcmu_pkt_buf_free_skb(bus->txglom_sgpad); + kfree(bus->rxbuf); + kfree(bus->hdrbuf); + kfree(bus); + } brcmf_dbg(TRACE, "Disconnected\n"); } -void -brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick) +void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick) { /* Totally stop the timer */ if (!wdtick && bus->wd_timer_valid) { @@ -4065,7 +4073,7 @@ brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick) } /* don't start the wd until fw is loaded */ - if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) + if (bus->sdiodev->bus_if->state != BRCMF_BUS_DATA) return; if (wdtick) { |