1 files changed, 51 insertions, 68 deletions

diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index d2388e8d179a..77406245dc7b 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -224,13 +224,58 @@ static int card_present(void *arg)
 	return 0;
 }
 
+static int atmel_config_check(struct pcmcia_device *p_dev,
+			      cistpl_cftable_entry_t *cfg,
+			      cistpl_cftable_entry_t *dflt,
+			      unsigned int vcc,
+			      void *priv_data)
+{
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Does this card need audio output? */
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->conf.Status = CCSR_AUDIO_ENA;
+	}
+
+	/* Use power settings for Vcc and Vpp if present */
+	/*  Note that the CIS values need to be rescaled */
+	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+	}
+
+	/* This reserves IO space but doesn't actually enable it */
+	return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static int atmel_config(struct pcmcia_device *link)
 {
-	tuple_t tuple;
-	cisparse_t parse;
 	local_info_t *dev;
 	int last_fn, last_ret;
-	u_char buf[64];
 	struct pcmcia_device_id *did;
 
 	dev = link->priv;
@@ -238,11 +283,6 @@ static int atmel_config(struct pcmcia_device *link)
 
 	DEBUG(0, "atmel_config(0x%p)\n", link);
 
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
 	/*
 	  In this loop, we scan the CIS for configuration table entries,
 	  each of which describes a valid card configuration, including
@@ -255,66 +295,8 @@ static int atmel_config(struct pcmcia_device *link)
 	  these things without consulting the CIS, and most client drivers
 	  will only use the CIS to fill in implementation-defined details.
 	*/
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	while (1) {
-		cistpl_cftable_entry_t dflt = { 0 };
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-				pcmcia_parse_tuple(link, &tuple, &parse) != 0)
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
-		if (cfg->index == 0) goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Does this card need audio output? */
-		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-			link->conf.Attributes |= CONF_ENABLE_SPKR;
-			link->conf.Status = CCSR_AUDIO_ENA;
-		}
-
-		/* Use power settings for Vcc and Vpp if present */
-		/*  Note that the CIS values need to be rescaled */
-		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-		}
-
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(link, &link->io) != 0)
-			goto next_entry;
-
-		/* If we got this far, we're cool! */
-		break;
-
-	next_entry:
-		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-	}
+	if (pcmcia_loop_config(link, atmel_config_check, NULL))
+		goto failed;
 
 	/*
 	  Allocate an interrupt line.  Note that this does not assign a
@@ -360,6 +342,7 @@ static int atmel_config(struct pcmcia_device *link)
 
  cs_failed:
 	cs_error(link, last_fn, last_ret);
+ failed:
 	atmel_release(link);
 	return -ENODEV;
 }