summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/wil6210/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/wil6210/main.c')
-rw-r--r--drivers/net/wireless/ath/wil6210/main.c64
1 files changed, 16 insertions, 48 deletions
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index a0478e2f6868..0a2844c48a60 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -56,27 +56,21 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
{
uint i;
struct net_device *ndev = wil_to_ndev(wil);
- struct wireless_dev *wdev = wil->wdev;
wil_dbg_misc(wil, "%s()\n", __func__);
wil_link_off(wil);
- clear_bit(wil_status_fwconnected, &wil->status);
-
- switch (wdev->sme_state) {
- case CFG80211_SME_CONNECTED:
- cfg80211_disconnected(ndev, WLAN_STATUS_UNSPECIFIED_FAILURE,
+ if (test_bit(wil_status_fwconnected, &wil->status)) {
+ clear_bit(wil_status_fwconnected, &wil->status);
+ cfg80211_disconnected(ndev,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
NULL, 0, GFP_KERNEL);
- break;
- case CFG80211_SME_CONNECTING:
+ } else if (test_bit(wil_status_fwconnecting, &wil->status)) {
cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
GFP_KERNEL);
- break;
- default:
- break;
}
-
+ clear_bit(wil_status_fwconnecting, &wil->status);
for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++)
wil_vring_fini_tx(wil, i);
@@ -292,41 +286,36 @@ static int __wil_up(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil->wdev;
- struct ieee80211_channel *channel = wdev->preset_chandef.chan;
int rc;
- int bi;
- u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
rc = wil_reset(wil);
if (rc)
return rc;
- /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
- wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
+ /* Rx VRING. After MAC and beacon */
+ rc = wil_rx_init(wil);
+ if (rc)
+ return rc;
+
switch (wdev->iftype) {
case NL80211_IFTYPE_STATION:
wil_dbg_misc(wil, "type: STATION\n");
- bi = 0;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_AP:
wil_dbg_misc(wil, "type: AP\n");
- bi = 100;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_P2P_CLIENT:
wil_dbg_misc(wil, "type: P2P_CLIENT\n");
- bi = 0;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_P2P_GO:
wil_dbg_misc(wil, "type: P2P_GO\n");
- bi = 100;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_MONITOR:
wil_dbg_misc(wil, "type: Monitor\n");
- bi = 0;
ndev->type = ARPHRD_IEEE80211_RADIOTAP;
/* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
break;
@@ -334,36 +323,12 @@ static int __wil_up(struct wil6210_priv *wil)
return -EOPNOTSUPP;
}
- /* Apply profile in the following order: */
- /* SSID and channel for the AP */
- switch (wdev->iftype) {
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_P2P_GO:
- if (wdev->ssid_len == 0) {
- wil_err(wil, "SSID not set\n");
- return -EINVAL;
- }
- rc = wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
- if (rc)
- return rc;
- break;
- default:
- break;
- }
-
/* MAC address - pre-requisite for other commands */
wmi_set_mac_address(wil, ndev->dev_addr);
- /* Set up beaconing if required. */
- if (bi > 0) {
- rc = wmi_pcp_start(wil, bi, wmi_nettype,
- (channel ? channel->hw_value : 0));
- if (rc)
- return rc;
- }
- /* Rx VRING. After MAC and beacon */
- wil_rx_init(wil);
+ napi_enable(&wil->napi_rx);
+ napi_enable(&wil->napi_tx);
return 0;
}
@@ -381,6 +346,9 @@ int wil_up(struct wil6210_priv *wil)
static int __wil_down(struct wil6210_priv *wil)
{
+ napi_disable(&wil->napi_rx);
+ napi_disable(&wil->napi_tx);
+
if (wil->scan_request) {
cfg80211_scan_done(wil->scan_request, true);
wil->scan_request = NULL;