diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/main.c')
-rw-r--r-- | drivers/net/wireless/ath/ath9k/main.c | 182 |
1 files changed, 83 insertions, 99 deletions
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 28cc9cd52f32..d3dc8e2c77b2 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2363,104 +2363,6 @@ skip_chan_change: return 0; } -static int ath9k_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct ath_wiphy *aphy = hw->priv; - struct ath_softc *sc = aphy->sc; - struct ath_hw *ah = sc->sc_ah; - struct ath_vif *avp = (void *)vif->drv_priv; - u32 rfilt = 0; - int error, i; - - mutex_lock(&sc->mutex); - - /* TODO: Need to decide which hw opmode to use for multi-interface - * cases */ - if (vif->type == NL80211_IFTYPE_AP && - ah->opmode != NL80211_IFTYPE_AP) { - ah->opmode = NL80211_IFTYPE_STATION; - ath9k_hw_setopmode(ah); - memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN); - sc->curaid = 0; - ath9k_hw_write_associd(sc); - /* Request full reset to get hw opmode changed properly */ - sc->sc_flags |= SC_OP_FULL_RESET; - } - - if ((conf->changed & IEEE80211_IFCC_BSSID) && - !is_zero_ether_addr(conf->bssid)) { - switch (vif->type) { - case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_MESH_POINT: - /* Set BSSID */ - memcpy(sc->curbssid, conf->bssid, ETH_ALEN); - memcpy(avp->bssid, conf->bssid, ETH_ALEN); - sc->curaid = 0; - ath9k_hw_write_associd(sc); - - /* Set aggregation protection mode parameters */ - sc->config.ath_aggr_prot = 0; - - DPRINTF(sc, ATH_DBG_CONFIG, - "RX filter 0x%x bssid %pM aid 0x%x\n", - rfilt, sc->curbssid, sc->curaid); - - /* need to reconfigure the beacon */ - sc->sc_flags &= ~SC_OP_BEACONS ; - - break; - default: - break; - } - } - - if ((vif->type == NL80211_IFTYPE_ADHOC) || - (vif->type == NL80211_IFTYPE_AP) || - (vif->type == NL80211_IFTYPE_MESH_POINT)) { - if ((conf->changed & IEEE80211_IFCC_BEACON) || - (conf->changed & IEEE80211_IFCC_BEACON_ENABLED && - conf->enable_beacon)) { - /* - * Allocate and setup the beacon frame. - * - * Stop any previous beacon DMA. This may be - * necessary, for example, when an ibss merge - * causes reconfiguration; we may be called - * with beacon transmission active. - */ - ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); - - error = ath_beacon_alloc(aphy, vif); - if (error != 0) { - mutex_unlock(&sc->mutex); - return error; - } - - ath_beacon_config(sc, vif); - } - } - - /* Check for WLAN_CAPABILITY_PRIVACY ? */ - if ((avp->av_opmode != NL80211_IFTYPE_STATION)) { - for (i = 0; i < IEEE80211_WEP_NKID; i++) - if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) - ath9k_hw_keysetmac(sc->sc_ah, - (u16)i, - sc->curbssid); - } - - /* Only legacy IBSS for now */ - if (vif->type == NL80211_IFTYPE_ADHOC) - ath_update_chainmask(sc, 0); - - mutex_unlock(&sc->mutex); - - return 0; -} - #define SUPPORTED_FILTERS \ (FIF_PROMISC_IN_BSS | \ FIF_ALLMULTI | \ @@ -2597,9 +2499,92 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, { struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; + struct ath_hw *ah = sc->sc_ah; + struct ath_vif *avp = (void *)vif->drv_priv; + u32 rfilt = 0; + int error, i; mutex_lock(&sc->mutex); + /* + * TODO: Need to decide which hw opmode to use for + * multi-interface cases + * XXX: This belongs into add_interface! + */ + if (vif->type == NL80211_IFTYPE_AP && + ah->opmode != NL80211_IFTYPE_AP) { + ah->opmode = NL80211_IFTYPE_STATION; + ath9k_hw_setopmode(ah); + memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN); + sc->curaid = 0; + ath9k_hw_write_associd(sc); + /* Request full reset to get hw opmode changed properly */ + sc->sc_flags |= SC_OP_FULL_RESET; + } + + if ((changed & BSS_CHANGED_BSSID) && + !is_zero_ether_addr(bss_conf->bssid)) { + switch (vif->type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + /* Set BSSID */ + memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN); + memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN); + sc->curaid = 0; + ath9k_hw_write_associd(sc); + + /* Set aggregation protection mode parameters */ + sc->config.ath_aggr_prot = 0; + + DPRINTF(sc, ATH_DBG_CONFIG, + "RX filter 0x%x bssid %pM aid 0x%x\n", + rfilt, sc->curbssid, sc->curaid); + + /* need to reconfigure the beacon */ + sc->sc_flags &= ~SC_OP_BEACONS ; + + break; + default: + break; + } + } + + if ((vif->type == NL80211_IFTYPE_ADHOC) || + (vif->type == NL80211_IFTYPE_AP) || + (vif->type == NL80211_IFTYPE_MESH_POINT)) { + if ((changed & BSS_CHANGED_BEACON) || + (changed & BSS_CHANGED_BEACON_ENABLED && + bss_conf->enable_beacon)) { + /* + * Allocate and setup the beacon frame. + * + * Stop any previous beacon DMA. This may be + * necessary, for example, when an ibss merge + * causes reconfiguration; we may be called + * with beacon transmission active. + */ + ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); + + error = ath_beacon_alloc(aphy, vif); + if (!error) + ath_beacon_config(sc, vif); + } + } + + /* Check for WLAN_CAPABILITY_PRIVACY ? */ + if ((avp->av_opmode != NL80211_IFTYPE_STATION)) { + for (i = 0; i < IEEE80211_WEP_NKID; i++) + if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) + ath9k_hw_keysetmac(sc->sc_ah, + (u16)i, + sc->curbssid); + } + + /* Only legacy IBSS for now */ + if (vif->type == NL80211_IFTYPE_ADHOC) + ath_update_chainmask(sc, 0); + if (changed & BSS_CHANGED_ERP_PREAMBLE) { DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n", bss_conf->use_short_preamble); @@ -2757,7 +2742,6 @@ struct ieee80211_ops ath9k_ops = { .add_interface = ath9k_add_interface, .remove_interface = ath9k_remove_interface, .config = ath9k_config, - .config_interface = ath9k_config_interface, .configure_filter = ath9k_configure_filter, .sta_notify = ath9k_sta_notify, .conf_tx = ath9k_conf_tx, |