diff options
Diffstat (limited to 'drivers/net/wimax/i2400m/rx.c')
| -rw-r--r-- | drivers/net/wimax/i2400m/rx.c | 1395 |
1 files changed, 0 insertions, 1395 deletions
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c deleted file mode 100644 index c9fb619a9e01..000000000000 --- a/drivers/net/wimax/i2400m/rx.c +++ /dev/null @@ -1,1395 +0,0 @@ -/* - * Intel Wireless WiMAX Connection 2400m - * Handle incoming traffic and deliver it to the control or data planes - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Yanir Lubetkin <yanirx.lubetkin@intel.com> - * - Initial implementation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - Use skb_clone(), break up processing in chunks - * - Split transport/device specific - * - Make buffer size dynamic to exert less memory pressure - * - RX reorder support - * - * This handles the RX path. - * - * We receive an RX message from the bus-specific driver, which - * contains one or more payloads that have potentially different - * destinataries (data or control paths). - * - * So we just take that payload from the transport specific code in - * the form of an skb, break it up in chunks (a cloned skb each in the - * case of network packets) and pass it to netdev or to the - * command/ack handler (and from there to the WiMAX stack). - * - * PROTOCOL FORMAT - * - * The format of the buffer is: - * - * HEADER (struct i2400m_msg_hdr) - * PAYLOAD DESCRIPTOR 0 (struct i2400m_pld) - * PAYLOAD DESCRIPTOR 1 - * ... - * PAYLOAD DESCRIPTOR N - * PAYLOAD 0 (raw bytes) - * PAYLOAD 1 - * ... - * PAYLOAD N - * - * See tx.c for a deeper description on alignment requirements and - * other fun facts of it. - * - * DATA PACKETS - * - * In firmwares <= v1.3, data packets have no header for RX, but they - * do for TX (currently unused). - * - * In firmware >= 1.4, RX packets have an extended header (16 - * bytes). This header conveys information for management of host - * reordering of packets (the device offloads storage of the packets - * for reordering to the host). Read below for more information. - * - * The header is used as dummy space to emulate an ethernet header and - * thus be able to act as an ethernet device without having to reallocate. - * - * DATA RX REORDERING - * - * Starting in firmware v1.4, the device can deliver packets for - * delivery with special reordering information; this allows it to - * more effectively do packet management when some frames were lost in - * the radio traffic. - * - * Thus, for RX packets that come out of order, the device gives the - * driver enough information to queue them properly and then at some - * point, the signal to deliver the whole (or part) of the queued - * packets to the networking stack. There are 16 such queues. - * - * This only happens when a packet comes in with the "need reorder" - * flag set in the RX header. When such bit is set, the following - * operations might be indicated: - * - * - reset queue: send all queued packets to the OS - * - * - queue: queue a packet - * - * - update ws: update the queue's window start and deliver queued - * packets that meet the criteria - * - * - queue & update ws: queue a packet, update the window start and - * deliver queued packets that meet the criteria - * - * (delivery criteria: the packet's [normalized] sequence number is - * lower than the new [normalized] window start). - * - * See the i2400m_roq_*() functions for details. - * - * ROADMAP - * - * i2400m_rx - * i2400m_rx_msg_hdr_check - * i2400m_rx_pl_descr_check - * i2400m_rx_payload - * i2400m_net_rx - * i2400m_rx_edata - * i2400m_net_erx - * i2400m_roq_reset - * i2400m_net_erx - * i2400m_roq_queue - * __i2400m_roq_queue - * i2400m_roq_update_ws - * __i2400m_roq_update_ws - * i2400m_net_erx - * i2400m_roq_queue_update_ws - * __i2400m_roq_queue - * __i2400m_roq_update_ws - * i2400m_net_erx - * i2400m_rx_ctl - * i2400m_msg_size_check - * i2400m_report_hook_work [in a workqueue] - * i2400m_report_hook - * wimax_msg_to_user - * i2400m_rx_ctl_ack - * wimax_msg_to_user_alloc - * i2400m_rx_trace - * i2400m_msg_size_check - * wimax_msg - */ -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/if_arp.h> -#include <linux/netdevice.h> -#include <linux/workqueue.h> -#include <linux/export.h> -#include <linux/moduleparam.h> -#include "i2400m.h" - - -#define D_SUBMODULE rx -#include "debug-levels.h" - -static int i2400m_rx_reorder_disabled; /* 0 (rx reorder enabled) by default */ -module_param_named(rx_reorder_disabled, i2400m_rx_reorder_disabled, int, 0644); -MODULE_PARM_DESC(rx_reorder_disabled, - "If true, RX reordering will be disabled."); - -struct i2400m_report_hook_args { - struct sk_buff *skb_rx; - const struct i2400m_l3l4_hdr *l3l4_hdr; - size_t size; - struct list_head list_node; -}; - - -/* - * Execute i2400m_report_hook in a workqueue - * - * Goes over the list of queued reports in i2400m->rx_reports and - * processes them. - * - * NOTE: refcounts on i2400m are not needed because we flush the - * workqueue this runs on (i2400m->work_queue) before destroying - * i2400m. - */ -void i2400m_report_hook_work(struct work_struct *ws) -{ - struct i2400m *i2400m = container_of(ws, struct i2400m, rx_report_ws); - struct device *dev = i2400m_dev(i2400m); - struct i2400m_report_hook_args *args, *args_next; - LIST_HEAD(list); - unsigned long flags; - - while (1) { - spin_lock_irqsave(&i2400m->rx_lock, flags); - list_splice_init(&i2400m->rx_reports, &list); - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - if (list_empty(&list)) - break; - else - d_printf(1, dev, "processing queued reports\n"); - list_for_each_entry_safe(args, args_next, &list, list_node) { - d_printf(2, dev, "processing queued report %p\n", args); - i2400m_report_hook(i2400m, args->l3l4_hdr, args->size); - kfree_skb(args->skb_rx); - list_del(&args->list_node); - kfree(args); - } - } -} - - -/* - * Flush the list of queued reports - */ -static -void i2400m_report_hook_flush(struct i2400m *i2400m) -{ - struct device *dev = i2400m_dev(i2400m); - struct i2400m_report_hook_args *args, *args_next; - LIST_HEAD(list); - unsigned long flags; - - d_printf(1, dev, "flushing queued reports\n"); - spin_lock_irqsave(&i2400m->rx_lock, flags); - list_splice_init(&i2400m->rx_reports, &list); - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - list_for_each_entry_safe(args, args_next, &list, list_node) { - d_printf(2, dev, "flushing queued report %p\n", args); - kfree_skb(args->skb_rx); - list_del(&args->list_node); - kfree(args); - } -} - - -/* - * Queue a report for later processing - * - * @i2400m: device descriptor - * @skb_rx: skb that contains the payload (for reference counting) - * @l3l4_hdr: pointer to the control - * @size: size of the message - */ -static -void i2400m_report_hook_queue(struct i2400m *i2400m, struct sk_buff *skb_rx, - const void *l3l4_hdr, size_t size) -{ - struct device *dev = i2400m_dev(i2400m); - unsigned long flags; - struct i2400m_report_hook_args *args; - - args = kzalloc(sizeof(*args), GFP_NOIO); - if (args) { - args->skb_rx = skb_get(skb_rx); - args->l3l4_hdr = l3l4_hdr; - args->size = size; - spin_lock_irqsave(&i2400m->rx_lock, flags); - list_add_tail(&args->list_node, &i2400m->rx_reports); - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - d_printf(2, dev, "queued report %p\n", args); - rmb(); /* see i2400m->ready's documentation */ - if (likely(i2400m->ready)) /* only send if up */ - queue_work(i2400m->work_queue, &i2400m->rx_report_ws); - } else { - if (printk_ratelimit()) - dev_err(dev, "%s:%u: Can't allocate %zu B\n", - __func__, __LINE__, sizeof(*args)); - } -} - - -/* - * Process an ack to a command - * - * @i2400m: device descriptor - * @payload: pointer to message - * @size: size of the message - * - * Pass the acknodledgment (in an skb) to the thread that is waiting - * for it in i2400m->msg_completion. - * - * We need to coordinate properly with the thread waiting for the - * ack. Check if it is waiting or if it is gone. We loose the spinlock - * to avoid allocating on atomic contexts (yeah, could use GFP_ATOMIC, - * but this is not so speed critical). - */ -static -void i2400m_rx_ctl_ack(struct i2400m *i2400m, - const void *payload, size_t size) -{ - struct device *dev = i2400m_dev(i2400m); - struct wimax_dev *wimax_dev = &i2400m->wimax_dev; - unsigned long flags; - struct sk_buff *ack_skb; - - /* Anyone waiting for an answer? */ - spin_lock_irqsave(&i2400m->rx_lock, flags); - if (i2400m->ack_skb != ERR_PTR(-EINPROGRESS)) { - dev_err(dev, "Huh? reply to command with no waiters\n"); - goto error_no_waiter; - } - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - - ack_skb = wimax_msg_alloc(wimax_dev, NULL, payload, size, GFP_KERNEL); - - /* Check waiter didn't time out waiting for the answer... */ - spin_lock_irqsave(&i2400m->rx_lock, flags); - if (i2400m->ack_skb != ERR_PTR(-EINPROGRESS)) { - d_printf(1, dev, "Huh? waiter for command reply cancelled\n"); - goto error_waiter_cancelled; - } - if (IS_ERR(ack_skb)) - dev_err(dev, "CMD/GET/SET ack: cannot allocate SKB\n"); - i2400m->ack_skb = ack_skb; - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - complete(&i2400m->msg_completion); - return; - -error_waiter_cancelled: - if (!IS_ERR(ack_skb)) - kfree_skb(ack_skb); -error_no_waiter: - spin_unlock_irqrestore(&i2400m->rx_lock, flags); -} - - -/* - * Receive and process a control payload - * - * @i2400m: device descriptor - * @skb_rx: skb that contains the payload (for reference counting) - * @payload: pointer to message - * @size: size of the message - * - * There are two types of control RX messages: reports (asynchronous, - * like your every day interrupts) and 'acks' (reponses to a command, - * get or set request). - * - * If it is a report, we run hooks on it (to extract information for - * things we need to do in the driver) and then pass it over to the - * WiMAX stack to send it to user space. - * - * NOTE: report processing is done in a workqueue specific to the - * generic driver, to avoid deadlocks in the system. - * - * If it is not a report, it is an ack to a previously executed - * command, set or get, so wake up whoever is waiting for it from - * i2400m_msg_to_dev(). i2400m_rx_ctl_ack() takes care of that. - * - * Note that the sizes we pass to other functions from here are the - * sizes of the _l3l4_hdr + payload, not full buffer sizes, as we have - * verified in _msg_size_check() that they are congruent. - * - * For reports: We can't clone the original skb where the data is - * because we need to send this up via netlink; netlink has to add - * headers and we can't overwrite what's preceding the payload...as - * it is another message. So we just dup them. - */ -static -void i2400m_rx_ctl(struct i2400m *i2400m, struct sk_buff *skb_rx, - const void *payload, size_t size) -{ - int result; - struct device *dev = i2400m_dev(i2400m); - const struct i2400m_l3l4_hdr *l3l4_hdr = payload; - unsigned msg_type; - - result = i2400m_msg_size_check(i2400m, l3l4_hdr, size); - if (result < 0) { - dev_err(dev, "HW BUG? device sent a bad message: %d\n", - result); - goto error_check; - } - msg_type = le16_to_cpu(l3l4_hdr->type); - d_printf(1, dev, "%s 0x%04x: %zu bytes\n", - msg_type & I2400M_MT_REPORT_MASK ? "REPORT" : "CMD/SET/GET", - msg_type, size); - d_dump(2, dev, l3l4_hdr, size); - if (msg_type & I2400M_MT_REPORT_MASK) { - /* - * Process each report - * - * - has to be ran serialized as well - * - * - the handling might force the execution of - * commands. That might cause reentrancy issues with - * bus-specific subdrivers and workqueues, so the we - * run it in a separate workqueue. - * - * - when the driver is not yet ready to handle them, - * they are queued and at some point the queue is - * restarted [NOTE: we can't queue SKBs directly, as - * this might be a piece of a SKB, not the whole - * thing, and this is cheaper than cloning the - * SKB]. - * - * Note we don't do refcounting for the device - * structure; this is because before destroying - * 'i2400m', we make sure to flush the - * i2400m->work_queue, so there are no issues. - */ - i2400m_report_hook_queue(i2400m, skb_rx, l3l4_hdr, size); - if (unlikely(i2400m->trace_msg_from_user)) - wimax_msg(&i2400m->wimax_dev, "echo", - l3l4_hdr, size, GFP_KERNEL); - result = wimax_msg(&i2400m->wimax_dev, NULL, l3l4_hdr, size, - GFP_KERNEL); - if (result < 0) - dev_err(dev, "error sending report to userspace: %d\n", - result); - } else /* an ack to a CMD, GET or SET */ - i2400m_rx_ctl_ack(i2400m, payload, size); -error_check: - return; -} - - -/* - * Receive and send up a trace - * - * @i2400m: device descriptor - * @skb_rx: skb that contains the trace (for reference counting) - * @payload: pointer to trace message inside the skb - * @size: size of the message - * - * THe i2400m might produce trace information (diagnostics) and we - * send them through a different kernel-to-user pipe (to avoid - * clogging it). - * - * As in i2400m_rx_ctl(), we can't clone the original skb where the - * data is because we need to send this up via netlink; netlink has to - * add headers and we can't overwrite what's preceding the - * payload...as it is another message. So we just dup them. - */ -static -void i2400m_rx_trace(struct i2400m *i2400m, - const void *payload, size_t size) -{ - int result; - struct device *dev = i2400m_dev(i2400m); - struct wimax_dev *wimax_dev = &i2400m->wimax_dev; - const struct i2400m_l3l4_hdr *l3l4_hdr = payload; - unsigned msg_type; - - result = i2400m_msg_size_check(i2400m, l3l4_hdr, size); - if (result < 0) { - dev_err(dev, "HW BUG? device sent a bad trace message: %d\n", - result); - goto error_check; - } - msg_type = le16_to_cpu(l3l4_hdr->type); - d_printf(1, dev, "Trace %s 0x%04x: %zu bytes\n", - msg_type & I2400M_MT_REPORT_MASK ? "REPORT" : "CMD/SET/GET", - msg_type, size); - d_dump(2, dev, l3l4_hdr, size); - result = wimax_msg(wimax_dev, "trace", l3l4_hdr, size, GFP_KERNEL); - if (result < 0) - dev_err(dev, "error sending trace to userspace: %d\n", - result); -error_check: - return; -} - - -/* - * Reorder queue data stored on skb->cb while the skb is queued in the - * reorder queues. - */ -struct i2400m_roq_data { - unsigned sn; /* Serial number for the skb */ - enum i2400m_cs cs; /* packet type for the skb */ -}; - - -/* - * ReOrder Queue - * - * @ws: Window Start; sequence number where the current window start - * is for this queue - * @queue: the skb queue itself - * @log: circular ring buffer used to log information about the - * reorder process in this queue that can be displayed in case of - * error to help diagnose it. - * - * This is the head for a list of skbs. In the skb->cb member of the - * skb when queued here contains a 'struct i2400m_roq_data' were we - * store the sequence number (sn) and the cs (packet type) coming from - * the RX payload header from the device. - */ -struct i2400m_roq -{ - unsigned ws; - struct sk_buff_head queue; - struct i2400m_roq_log *log; -}; - - -static -void __i2400m_roq_init(struct i2400m_roq *roq) -{ - roq->ws = 0; - skb_queue_head_init(&roq->queue); -} - - -static -unsigned __i2400m_roq_index(struct i2400m *i2400m, struct i2400m_roq *roq) -{ - return ((unsigned long) roq - (unsigned long) i2400m->rx_roq) - / sizeof(*roq); -} - - -/* - * Normalize a sequence number based on the queue's window start - * - * nsn = (sn - ws) % 2048 - * - * Note that if @sn < @roq->ws, we still need a positive number; %'s - * sign is implementation specific, so we normalize it by adding 2048 - * to bring it to be positive. - */ -static -unsigned __i2400m_roq_nsn(struct i2400m_roq *roq, unsigned sn) -{ - int r; - r = ((int) sn - (int) roq->ws) % 2048; - if (r < 0) - r += 2048; - return r; -} - - -/* - * Circular buffer to keep the last N reorder operations - * - * In case something fails, dumb then to try to come up with what - * happened. - */ -enum { - I2400M_ROQ_LOG_LENGTH = 32, -}; - -struct i2400m_roq_log { - struct i2400m_roq_log_entry { - enum i2400m_ro_type type; - unsigned ws, count, sn, nsn, new_ws; - } entry[I2400M_ROQ_LOG_LENGTH]; - unsigned in, out; -}; - - -/* Print a log entry */ -static -void i2400m_roq_log_entry_print(struct i2400m *i2400m, unsigned index, - unsigned e_index, - struct i2400m_roq_log_entry *e) -{ - struct device *dev = i2400m_dev(i2400m); - - switch(e->type) { - case I2400M_RO_TYPE_RESET: - dev_err(dev, "q#%d reset ws %u cnt %u sn %u/%u" - " - new nws %u\n", - index, e->ws, e->count, e->sn, e->nsn, e->new_ws); - break; - case I2400M_RO_TYPE_PACKET: - dev_err(dev, "q#%d queue ws %u cnt %u sn %u/%u\n", - index, e->ws, e->count, e->sn, e->nsn); - break; - case I2400M_RO_TYPE_WS: - dev_err(dev, "q#%d update_ws ws %u cnt %u sn %u/%u" - " - new nws %u\n", - index, e->ws, e->count, e->sn, e->nsn, e->new_ws); - break; - case I2400M_RO_TYPE_PACKET_WS: - dev_err(dev, "q#%d queue_update_ws ws %u cnt %u sn %u/%u" - " - new nws %u\n", - index, e->ws, e->count, e->sn, e->nsn, e->new_ws); - break; - default: - dev_err(dev, "q#%d BUG? entry %u - unknown type %u\n", - index, e_index, e->type); - break; - } -} - - -static -void i2400m_roq_log_add(struct i2400m *i2400m, - struct i2400m_roq *roq, enum i2400m_ro_type type, - unsigned ws, unsigned count, unsigned sn, - unsigned nsn, unsigned new_ws) -{ - struct i2400m_roq_log_entry *e; - unsigned cnt_idx; - int index = __i2400m_roq_index(i2400m, roq); - - /* if we run out of space, we eat from the end */ - if (roq->log->in - roq->log->out == I2400M_ROQ_LOG_LENGTH) - roq->log->out++; - cnt_idx = roq->log->in++ % I2400M_ROQ_LOG_LENGTH; - e = &roq->log->entry[cnt_idx]; - - e->type = type; - e->ws = ws; - e->count = count; - e->sn = sn; - e->nsn = nsn; - e->new_ws = new_ws; - - if (d_test(1)) - i2400m_roq_log_entry_print(i2400m, index, cnt_idx, e); -} - - -/* Dump all the entries in the FIFO and reinitialize it */ -static -void i2400m_roq_log_dump(struct i2400m *i2400m, struct i2400m_roq *roq) -{ - unsigned cnt, cnt_idx; - struct i2400m_roq_log_entry *e; - int index = __i2400m_roq_index(i2400m, roq); - - BUG_ON(roq->log->out > roq->log->in); - for (cnt = roq->log->out; cnt < roq->log->in; cnt++) { - cnt_idx = cnt % I2400M_ROQ_LOG_LENGTH; - e = &roq->log->entry[cnt_idx]; - i2400m_roq_log_entry_print(i2400m, index, cnt_idx, e); - memset(e, 0, sizeof(*e)); - } - roq->log->in = roq->log->out = 0; -} - - -/* - * Backbone for the queuing of an skb (by normalized sequence number) - * - * @i2400m: device descriptor - * @roq: reorder queue where to add - * @skb: the skb to add - * @sn: the sequence number of the skb - * @nsn: the normalized sequence number of the skb (pre-computed by the - * caller from the @sn and @roq->ws). - * - * We try first a couple of quick cases: - * - * - the queue is empty - * - the skb would be appended to the queue - * - * These will be the most common operations. - * - * If these fail, then we have to do a sorted insertion in the queue, - * which is the slowest path. - * - * We don't have to acquire a reference count as we are going to own it. - */ -static -void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq, - struct sk_buff *skb, unsigned sn, unsigned nsn) -{ - struct device *dev = i2400m_dev(i2400m); - struct sk_buff *skb_itr; - struct i2400m_roq_data *roq_data_itr, *roq_data; - unsigned nsn_itr; - - d_fnstart(4, dev, "(i2400m %p roq %p skb %p sn %u nsn %u)\n", - i2400m, roq, skb, sn, nsn); - - roq_data = (struct i2400m_roq_data *) &skb->cb; - BUILD_BUG_ON(sizeof(*roq_data) > sizeof(skb->cb)); - roq_data->sn = sn; - d_printf(3, dev, "ERX: roq %p [ws %u] nsn %d sn %u\n", - roq, roq->ws, nsn, roq_data->sn); - - /* Queues will be empty on not-so-bad environments, so try - * that first */ - if (skb_queue_empty(&roq->queue)) { - d_printf(2, dev, "ERX: roq %p - first one\n", roq); - __skb_queue_head(&roq->queue, skb); - goto out; - } - /* Now try append, as most of the operations will be that */ - skb_itr = skb_peek_tail(&roq->queue); - roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; - nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); - /* NSN bounds assumed correct (checked when it was queued) */ - if (nsn >= nsn_itr) { - d_printf(2, dev, "ERX: roq %p - appended after %p (nsn %d sn %u)\n", - roq, skb_itr, nsn_itr, roq_data_itr->sn); - __skb_queue_tail(&roq->queue, skb); - goto out; - } - /* None of the fast paths option worked. Iterate to find the - * right spot where to insert the packet; we know the queue is - * not empty, so we are not the first ones; we also know we - * are not going to be the last ones. The list is sorted, so - * we have to insert before the the first guy with an nsn_itr - * greater that our nsn. */ - skb_queue_walk(&roq->queue, skb_itr) { - roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; - nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); - /* NSN bounds assumed correct (checked when it was queued) */ - if (nsn_itr > nsn) { - d_printf(2, dev, "ERX: roq %p - queued before %p " - "(nsn %d sn %u)\n", roq, skb_itr, nsn_itr, - roq_data_itr->sn); - __skb_queue_before(&roq->queue, skb_itr, skb); - goto out; - } - } - /* If we get here, that is VERY bad -- print info to help - * diagnose and crash it */ - dev_err(dev, "SW BUG? failed to insert packet\n"); - dev_err(dev, "ERX: roq %p [ws %u] skb %p nsn %d sn %u\n", - roq, roq->ws, skb, nsn, roq_data->sn); - skb_queue_walk(&roq->queue, skb_itr) { - roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; - nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); - /* NSN bounds assumed correct (checked when it was queued) */ - dev_err(dev, "ERX: roq %p skb_itr %p nsn %d sn %u\n", - roq, skb_itr, nsn_itr, roq_data_itr->sn); - } - BUG(); -out: - d_fnend(4, dev, "(i2400m %p roq %p skb %p sn %u nsn %d) = void\n", - i2400m, roq, skb, sn, nsn); -} - - -/* - * Backbone for the update window start operation - * - * @i2400m: device descriptor - * @roq: Reorder queue - * @sn: New sequence number - * - * Updates the window start of a queue; when doing so, it must deliver - * to the networking stack all the queued skb's whose normalized - * sequence number is lower than the new normalized window start. - */ -static -unsigned __i2400m_roq_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, - unsigned sn) -{ - struct device *dev = i2400m_dev(i2400m); - struct sk_buff *skb_itr, *tmp_itr; - struct i2400m_roq_data *roq_data_itr; - unsigned new_nws, nsn_itr; - - new_nws = __i2400m_roq_nsn(roq, sn); - /* - * For type 2(update_window_start) rx messages, there is no - * need to check if the normalized sequence number is greater 1023. - * Simply insert and deliver all packets to the host up to the - * window start. - */ - skb_queue_walk_safe(&roq->queue, skb_itr, tmp_itr) { - roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; - nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); - /* NSN bounds assumed correct (checked when it was queued) */ - if (nsn_itr < new_nws) { - d_printf(2, dev, "ERX: roq %p - release skb %p " - "(nsn %u/%u new nws %u)\n", - roq, skb_itr, nsn_itr, roq_data_itr->sn, - new_nws); - __skb_unlink(skb_itr, &roq->queue); - i2400m_net_erx(i2400m, skb_itr, roq_data_itr->cs); - } - else - break; /* rest of packets all nsn_itr > nws */ - } - roq->ws = sn; - return new_nws; -} - - -/* - * Reset a queue - * - * @i2400m: device descriptor - * @cin: Queue Index - * - * Deliver all the packets and reset the window-start to zero. Name is - * kind of misleading. - */ -static -void i2400m_roq_reset(struct i2400m *i2400m, struct i2400m_roq *roq) -{ - struct device *dev = i2400m_dev(i2400m); - struct sk_buff *skb_itr, *tmp_itr; - struct i2400m_roq_data *roq_data_itr; - - d_fnstart(2, dev, "(i2400m %p roq %p)\n", i2400m, roq); - i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_RESET, - roq->ws, skb_queue_len(&roq->queue), - ~0, ~0, 0); - skb_queue_walk_safe(&roq->queue, skb_itr, tmp_itr) { - roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; - d_printf(2, dev, "ERX: roq %p - release skb %p (sn %u)\n", - roq, skb_itr, roq_data_itr->sn); - __skb_unlink(skb_itr, &roq->queue); - i2400m_net_erx(i2400m, skb_itr, roq_data_itr->cs); - } - roq->ws = 0; - d_fnend(2, dev, "(i2400m %p roq %p) = void\n", i2400m, roq); -} - - -/* - * Queue a packet - * - * @i2400m: device descriptor - * @cin: Queue Index - * @skb: containing the packet data - * @fbn: First block number of the packet in @skb - * @lbn: Last block number of the packet in @skb - * - * The hardware is asking the driver to queue a packet for later - * delivery to the networking stack. - */ -static -void i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq, - struct sk_buff * skb, unsigned lbn) -{ - struct device *dev = i2400m_dev(i2400m); - unsigned nsn, len; - - d_fnstart(2, dev, "(i2400m %p roq %p skb %p lbn %u) = void\n", - i2400m, roq, skb, lbn); - len = skb_queue_len(&roq->queue); - nsn = __i2400m_roq_nsn(roq, lbn); - if (unlikely(nsn >= 1024)) { - dev_err(dev, "SW BUG? queue nsn %d (lbn %u ws %u)\n", - nsn, lbn, roq->ws); - i2400m_roq_log_dump(i2400m, roq); - i2400m_reset(i2400m, I2400M_RT_WARM); - } else { - __i2400m_roq_queue(i2400m, roq, skb, lbn, nsn); - i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET, - roq->ws, len, lbn, nsn, ~0); - } - d_fnend(2, dev, "(i2400m %p roq %p skb %p lbn %u) = void\n", - i2400m, roq, skb, lbn); -} - - -/* - * Update the window start in a reorder queue and deliver all skbs - * with a lower window start - * - * @i2400m: device descriptor - * @roq: Reorder queue - * @sn: New sequence number - */ -static -void i2400m_roq_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, - unsigned sn) -{ - struct device *dev = i2400m_dev(i2400m); - unsigned old_ws, nsn, len; - - d_fnstart(2, dev, "(i2400m %p roq %p sn %u)\n", i2400m, roq, sn); - old_ws = roq->ws; - len = skb_queue_len(&roq->queue); - nsn = __i2400m_roq_update_ws(i2400m, roq, sn); - i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_WS, - old_ws, len, sn, nsn, roq->ws); - d_fnstart(2, dev, "(i2400m %p roq %p sn %u) = void\n", i2400m, roq, sn); -} - - -/* - * Queue a packet and update the window start - * - * @i2400m: device descriptor - * @cin: Queue Index - * @skb: containing the packet data - * @fbn: First block number of the packet in @skb - * @sn: Last block number of the packet in @skb - * - * Note that unlike i2400m_roq_update_ws(), which sets the new window - * start to @sn, in here we'll set it to @sn + 1. - */ -static -void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, - struct sk_buff * skb, unsigned sn) -{ - struct device *dev = i2400m_dev(i2400m); - unsigned nsn, old_ws, len; - - d_fnstart(2, dev, "(i2400m %p roq %p skb %p sn %u)\n", - i2400m, roq, skb, sn); - len = skb_queue_len(&roq->queue); - nsn = __i2400m_roq_nsn(roq, sn); - /* - * For type 3(queue_update_window_start) rx messages, there is no - * need to check if the normalized sequence number is greater 1023. - * Simply insert and deliver all packets to the host up to the - * window start. - */ - old_ws = roq->ws; - /* If the queue is empty, don't bother as we'd queue - * it and immediately unqueue it -- just deliver it. - */ - if (len == 0) { - struct i2400m_roq_data *roq_data; - roq_data = (struct i2400m_roq_data *) &skb->cb; - i2400m_net_erx(i2400m, skb, roq_data->cs); - } else - __i2400m_roq_queue(i2400m, roq, skb, sn, nsn); - - __i2400m_roq_update_ws(i2400m, roq, sn + 1); - i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS, - old_ws, len, sn, nsn, roq->ws); - - d_fnend(2, dev, "(i2400m %p roq %p skb %p sn %u) = void\n", - i2400m, roq, skb, sn); -} - - -/* - * This routine destroys the memory allocated for rx_roq, when no - * other thread is accessing it. Access to rx_roq is refcounted by - * rx_roq_refcount, hence memory allocated must be destroyed when - * rx_roq_refcount becomes zero. This routine gets executed when - * rx_roq_refcount becomes zero. - */ -static void i2400m_rx_roq_destroy(struct kref *ref) -{ - unsigned itr; - struct i2400m *i2400m - = container_of(ref, struct i2400m, rx_roq_refcount); - for (itr = 0; itr < I2400M_RO_CIN + 1; itr++) - __skb_queue_purge(&i2400m->rx_roq[itr].queue); - kfree(i2400m->rx_roq[0].log); - kfree(i2400m->rx_roq); - i2400m->rx_roq = NULL; -} - -/* - * Receive and send up an extended data packet - * - * @i2400m: device descriptor - * @skb_rx: skb that contains the extended data packet - * @single_last: 1 if the payload is the only one or the last one of - * the skb. - * @payload: pointer to the packet's data inside the skb - * @size: size of the payload - * - * Starting in v1.4 of the i2400m's firmware, the device can send data - * packets to the host in an extended format that; this incudes a 16 - * byte header (struct i2400m_pl_edata_hdr). Using this header's space - * we can fake ethernet headers for ethernet device emulation without - * having to copy packets around. - * - * This function handles said path. - * - * - * Receive and send up an extended data packet that requires no reordering - * - * @i2400m: device descriptor - * @skb_rx: skb that contains the extended data packet - * @single_last: 1 if the payload is the only one or the last one of - * the skb. - * @payload: pointer to the packet's data (past the actual extended - * data payload header). - * @size: size of the payload - * - * Pass over to the networking stack a data packet that might have - * reordering requirements. - * - * This needs to the decide if the skb in which the packet is - * contained can be reused or if it needs to be cloned. Then it has to - * be trimmed in the edges so that the beginning is the space for eth - * header and then pass it to i2400m_net_erx() for the stack - * - * Assumes the caller has verified the sanity of the payload (size, - * etc) already. - */ -static -void i2400m_rx_edata(struct i2400m *i2400m, struct sk_buff *skb_rx, - unsigned single_last, const void *payload, size_t size) -{ - struct device *dev = i2400m_dev(i2400m); - const struct i2400m_pl_edata_hdr *hdr = payload; - struct net_device *net_dev = i2400m->wimax_dev.net_dev; - struct sk_buff *skb; - enum i2400m_cs cs; - u32 reorder; - unsigned ro_needed, ro_type, ro_cin, ro_sn; - struct i2400m_roq *roq; - struct i2400m_roq_data *roq_data; - unsigned long flags; - - BUILD_BUG_ON(ETH_HLEN > sizeof(*hdr)); - - d_fnstart(2, dev, "(i2400m %p skb_rx %p single %u payload %p " - "size %zu)\n", i2400m, skb_rx, single_last, payload, size); - if (size < sizeof(*hdr)) { - dev_err(dev, "ERX: HW BUG? message with short header (%zu " - "vs %zu bytes expected)\n", size, sizeof(*hdr)); - goto error; - } - - if (single_last) { - skb = skb_get(skb_rx); - d_printf(3, dev, "ERX: skb %p reusing\n", skb); - } else { - skb = skb_clone(skb_rx, GFP_KERNEL); - if (skb == NULL) { - dev_err(dev, "ERX: no memory to clone skb\n"); - net_dev->stats.rx_dropped++; - goto error_skb_clone; - } - d_printf(3, dev, "ERX: skb %p cloned from %p\n", skb, skb_rx); - } - /* now we have to pull and trim so that the skb points to the - * beginning of the IP packet; the netdev part will add the - * ethernet header as needed - we know there is enough space - * because we checked in i2400m_rx_edata(). */ - skb_pull(skb, payload + sizeof(*hdr) - (void *) skb->data); - skb_trim(skb, (void *) skb_end_pointer(skb) - payload - sizeof(*hdr)); - - reorder = le32_to_cpu(hdr->reorder); - ro_needed = reorder & I2400M_RO_NEEDED; - cs = hdr->cs; - if (ro_needed) { - ro_type = (reorder >> I2400M_RO_TYPE_SHIFT) & I2400M_RO_TYPE; - ro_cin = (reorder >> I2400M_RO_CIN_SHIFT) & I2400M_RO_CIN; - ro_sn = (reorder >> I2400M_RO_SN_SHIFT) & I2400M_RO_SN; - - spin_lock_irqsave(&i2400m->rx_lock, flags); - if (i2400m->rx_roq == NULL) { - kfree_skb(skb); /* rx_roq is already destroyed */ - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - goto error; - } - roq = &i2400m->rx_roq[ro_cin]; - kref_get(&i2400m->rx_roq_refcount); - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - - roq_data = (struct i2400m_roq_data *) &skb->cb; - roq_data->sn = ro_sn; - roq_data->cs = cs; - d_printf(2, dev, "ERX: reorder needed: " - "type %u cin %u [ws %u] sn %u/%u len %zuB\n", - ro_type, ro_cin, roq->ws, ro_sn, - __i2400m_roq_nsn(roq, ro_sn), size); - d_dump(2, dev, payload, size); - switch(ro_type) { - case I2400M_RO_TYPE_RESET: - i2400m_roq_reset(i2400m, roq); - kfree_skb(skb); /* no data here */ - break; - case I2400M_RO_TYPE_PACKET: - i2400m_roq_queue(i2400m, roq, skb, ro_sn); - break; - case I2400M_RO_TYPE_WS: - i2400m_roq_update_ws(i2400m, roq, ro_sn); - kfree_skb(skb); /* no data here */ - break; - case I2400M_RO_TYPE_PACKET_WS: - i2400m_roq_queue_update_ws(i2400m, roq, skb, ro_sn); - break; - default: - dev_err(dev, "HW BUG? unknown reorder type %u\n", ro_type); - } - - spin_lock_irqsave(&i2400m->rx_lock, flags); - kref_put(&i2400m->rx_roq_refcount, i2400m_rx_roq_destroy); - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - } - else - i2400m_net_erx(i2400m, skb, cs); -error_skb_clone: -error: - d_fnend(2, dev, "(i2400m %p skb_rx %p single %u payload %p " - "size %zu) = void\n", i2400m, skb_rx, single_last, payload, size); -} - - -/* - * Act on a received payload - * - * @i2400m: device instance - * @skb_rx: skb where the transaction was received - * @single_last: 1 this is the only payload or the last one (so the - * skb can be reused instead of cloned). - * @pld: payload descriptor - * @payload: payload data - * - * Upon reception of a payload, look at its guts in the payload - * descriptor and decide what to do with it. If it is a single payload - * skb or if the last skb is a data packet, the skb will be referenced - * and modified (so it doesn't have to be cloned). - */ -static -void i2400m_rx_payload(struct i2400m *i2400m, struct sk_buff *skb_rx, - unsigned single_last, const struct i2400m_pld *pld, - const void *payload) -{ - struct device *dev = i2400m_dev(i2400m); - size_t pl_size = i2400m_pld_size(pld); - enum i2400m_pt pl_type = i2400m_pld_type(pld); - - d_printf(7, dev, "RX: received payload type %u, %zu bytes\n", - pl_type, pl_size); - d_dump(8, dev, payload, pl_size); - - switch (pl_type) { - case I2400M_PT_DATA: - d_printf(3, dev, "RX: data payload %zu bytes\n", pl_size); - i2400m_net_rx(i2400m, skb_rx, single_last, payload, pl_size); - break; - case I2400M_PT_CTRL: - i2400m_rx_ctl(i2400m, skb_rx, payload, pl_size); - break; - case I2400M_PT_TRACE: - i2400m_rx_trace(i2400m, payload, pl_size); - break; - case I2400M_PT_EDATA: - d_printf(3, dev, "ERX: data payload %zu bytes\n", pl_size); - i2400m_rx_edata(i2400m, skb_rx, single_last, payload, pl_size); - break; - default: /* Anything else shouldn't come to the host */ - if (printk_ratelimit()) - dev_err(dev, "RX: HW BUG? unexpected payload type %u\n", - pl_type); - } -} - - -/* - * Check a received transaction's message header - * - * @i2400m: device descriptor - * @msg_hdr: message header - * @buf_size: size of the received buffer - * - * Check that the declarations done by a RX buffer message header are - * sane and consistent with the amount of data that was received. - */ -static -int i2400m_rx_msg_hdr_check(struct i2400m *i2400m, - const struct i2400m_msg_hdr *msg_hdr, - size_t buf_size) -{ - int result = -EIO; - struct device *dev = i2400m_dev(i2400m); - if (buf_size < sizeof(*msg_hdr)) { - dev_err(dev, "RX: HW BUG? message with short header (%zu " - "vs %zu bytes expected)\n", buf_size, sizeof(*msg_hdr)); - goto error; - } - if (msg_hdr->barker != cpu_to_le32(I2400M_D2H_MSG_BARKER)) { - dev_err(dev, "RX: HW BUG? message received with unknown " - "barker 0x%08x (buf_size %zu bytes)\n", - le32_to_cpu(msg_hdr->barker), buf_size); - goto error; - } - if (msg_hdr->num_pls == 0) { - dev_err(dev, "RX: HW BUG? zero payload packets in message\n"); - goto error; - } - if (le16_to_cpu(msg_hdr->num_pls) > I2400M_MAX_PLS_IN_MSG) { - dev_err(dev, "RX: HW BUG? message contains more payload " - "than maximum; ignoring.\n"); - goto error; - } - result = 0; -error: - return result; -} - - -/* - * Check a payload descriptor against the received data - * - * @i2400m: device descriptor - * @pld: payload descriptor - * @pl_itr: offset (in bytes) in the received buffer the payload is - * located - * @buf_size: size of the received buffer - * - * Given a payload descriptor (part of a RX buffer), check it is sane - * and that the data it declares fits in the buffer. - */ -static -int i2400m_rx_pl_descr_check(struct i2400m *i2400m, - const struct i2400m_pld *pld, - size_t pl_itr, size_t buf_size) -{ - int result = -EIO; - struct device *dev = i2400m_dev(i2400m); - size_t pl_size = i2400m_pld_size(pld); - enum i2400m_pt pl_type = i2400m_pld_type(pld); - - if (pl_size > i2400m->bus_pl_size_max) { - dev_err(dev, "RX: HW BUG? payload @%zu: size %zu is " - "bigger than maximum %zu; ignoring message\n", - pl_itr, pl_size, i2400m->bus_pl_size_max); - goto error; - } - if (pl_itr + pl_size > buf_size) { /* enough? */ - dev_err(dev, "RX: HW BUG? payload @%zu: size %zu " - "goes beyond the received buffer " - "size (%zu bytes); ignoring message\n", - pl_itr, pl_size, buf_size); - goto error; - } - if (pl_type >= I2400M_PT_ILLEGAL) { - dev_err(dev, "RX: HW BUG? illegal payload type %u; " - "ignoring message\n", pl_type); - goto error; - } - result = 0; -error: - return result; -} - - -/** - * i2400m_rx - Receive a buffer of data from the device - * - * @i2400m: device descriptor - * @skb: skbuff where the data has been received - * - * Parse in a buffer of data that contains an RX message sent from the - * device. See the file header for the format. Run all checks on the - * buffer header, then run over each payload's descriptors, verify - * their consistency and act on each payload's contents. If - * everything is successful, update the device's statistics. - * - * Note: You need to set the skb to contain only the length of the - * received buffer; for that, use skb_trim(skb, RECEIVED_SIZE). - * - * Returns: - * - * 0 if ok, < 0 errno on error - * - * If ok, this function owns now the skb and the caller DOESN'T have - * to run kfree_skb() on it. However, on error, the caller still owns - * the skb and it is responsible for releasing it. - */ -int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb) -{ - int i, result; - struct device *dev = i2400m_dev(i2400m); - const struct i2400m_msg_hdr *msg_hdr; - size_t pl_itr, pl_size; - unsigned long flags; - unsigned num_pls, single_last, skb_len; - - skb_len = skb->len; - d_fnstart(4, dev, "(i2400m %p skb %p [size %u])\n", - i2400m, skb, skb_len); - msg_hdr = (void *) skb->data; - result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb_len); - if (result < 0) - goto error_msg_hdr_check; - result = -EIO; - num_pls = le16_to_cpu(msg_hdr->num_pls); - /* Check payload descriptor(s) */ - pl_itr = struct_size(msg_hdr, pld, num_pls); - pl_itr = ALIGN(pl_itr, I2400M_PL_ALIGN); - if (pl_itr > skb_len) { /* got all the payload descriptors? */ - dev_err(dev, "RX: HW BUG? message too short (%u bytes) for " - "%u payload descriptors (%zu each, total %zu)\n", - skb_len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr); - goto error_pl_descr_short; - } - /* Walk each payload payload--check we really got it */ - for (i = 0; i < num_pls; i++) { - /* work around old gcc warnings */ - pl_size = i2400m_pld_size(&msg_hdr->pld[i]); - result = i2400m_rx_pl_descr_check(i2400m, &msg_hdr->pld[i], - pl_itr, skb_len); - if (result < 0) - goto error_pl_descr_check; - single_last = num_pls == 1 || i == num_pls - 1; - i2400m_rx_payload(i2400m, skb, single_last, &msg_hdr->pld[i], - skb->data + pl_itr); - pl_itr += ALIGN(pl_size, I2400M_PL_ALIGN); - cond_resched(); /* Don't monopolize */ - } - kfree_skb(skb); - /* Update device statistics */ - spin_lock_irqsave(&i2400m->rx_lock, flags); - i2400m->rx_pl_num += i; - if (i > i2400m->rx_pl_max) - i2400m->rx_pl_max = i; - if (i < i2400m->rx_pl_min) - i2400m->rx_pl_min = i; - i2400m->rx_num++; - i2400m->rx_size_acc += skb_len; - if (skb_len < i2400m->rx_size_min) - i2400m->rx_size_min = skb_len; - if (skb_len > i2400m->rx_size_max) - i2400m->rx_size_max = skb_len; - spin_unlock_irqrestore(&i2400m->rx_lock, flags); -error_pl_descr_check: -error_pl_descr_short: -error_msg_hdr_check: - d_fnend(4, dev, "(i2400m %p skb %p [size %u]) = %d\n", - i2400m, skb, skb_len, result); - return result; -} -EXPORT_SYMBOL_GPL(i2400m_rx); - - -void i2400m_unknown_barker(struct i2400m *i2400m, - const void *buf, size_t size) -{ - struct device *dev = i2400m_dev(i2400m); - char prefix[64]; - const __le32 *barker = buf; - dev_err(dev, "RX: HW BUG? unknown barker %08x, " - "dropping %zu bytes\n", le32_to_cpu(*barker), size); - snprintf(prefix, sizeof(prefix), "%s %s: ", - dev_driver_string(dev), dev_name(dev)); - if (size > 64) { - print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET, - 8, 4, buf, 64, 0); - printk(KERN_ERR "%s... (only first 64 bytes " - "dumped)\n", prefix); - } else - print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET, - 8, 4, buf, size, 0); -} -EXPORT_SYMBOL(i2400m_unknown_barker); - - -/* - * Initialize the RX queue and infrastructure - * - * This sets up all the RX reordering infrastructures, which will not - * be used if reordering is not enabled or if the firmware does not - * support it. The device is told to do reordering in - * i2400m_dev_initialize(), where it also looks at the value of the - * i2400m->rx_reorder switch before taking a decission. - * - * Note we allocate the roq queues in one chunk and the actual logging - * support for it (logging) in another one and then we setup the - * pointers from the first to the last. - */ -int i2400m_rx_setup(struct i2400m *i2400m) -{ - int result = 0; - - i2400m->rx_reorder = i2400m_rx_reorder_disabled? 0 : 1; - if (i2400m->rx_reorder) { - unsigned itr; - struct i2400m_roq_log *rd; - - result = -ENOMEM; - - i2400m->rx_roq = kcalloc(I2400M_RO_CIN + 1, - sizeof(i2400m->rx_roq[0]), GFP_KERNEL); - if (i2400m->rx_roq == NULL) - goto error_roq_alloc; - - rd = kcalloc(I2400M_RO_CIN + 1, sizeof(*i2400m->rx_roq[0].log), - GFP_KERNEL); - if (rd == NULL) { - result = -ENOMEM; - goto error_roq_log_alloc; - } - - for(itr = 0; itr < I2400M_RO_CIN + 1; itr++) { - __i2400m_roq_init(&i2400m->rx_roq[itr]); - i2400m->rx_roq[itr].log = &rd[itr]; - } - kref_init(&i2400m->rx_roq_refcount); - } - return 0; - -error_roq_log_alloc: - kfree(i2400m->rx_roq); -error_roq_alloc: - return result; -} - - -/* Tear down the RX queue and infrastructure */ -void i2400m_rx_release(struct i2400m *i2400m) -{ - unsigned long flags; - - if (i2400m->rx_reorder) { - spin_lock_irqsave(&i2400m->rx_lock, flags); - kref_put(&i2400m->rx_roq_refcount, i2400m_rx_roq_destroy); - spin_unlock_irqrestore(&i2400m->rx_lock, flags); - } - /* at this point, nothing can be received... */ - i2400m_report_hook_flush(i2400m); -} |