diff options
Diffstat (limited to 'drivers/net/sfc')
33 files changed, 12877 insertions, 0 deletions
diff --git a/drivers/net/sfc/Kconfig b/drivers/net/sfc/Kconfig new file mode 100644 index 000000000000..dbad95c295bd --- /dev/null +++ b/drivers/net/sfc/Kconfig @@ -0,0 +1,12 @@ +config SFC + tristate "Solarflare Solarstorm SFC4000 support" + depends on PCI && INET + select MII + select INET_LRO + select CRC32 + help + This driver supports 10-gigabit Ethernet cards based on + the Solarflare Communications Solarstorm SFC4000 controller. + + To compile this driver as a module, choose M here. The module + will be called sfc. diff --git a/drivers/net/sfc/Makefile b/drivers/net/sfc/Makefile new file mode 100644 index 000000000000..0f023447eafd --- /dev/null +++ b/drivers/net/sfc/Makefile @@ -0,0 +1,5 @@ +sfc-y += efx.o falcon.o tx.o rx.o falcon_xmac.o \ + i2c-direct.o ethtool.o xfp_phy.o mdio_10g.o \ + tenxpress.o boards.o sfe4001.o + +obj-$(CONFIG_SFC) += sfc.o diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h new file mode 100644 index 000000000000..2806201644cc --- /dev/null +++ b/drivers/net/sfc/bitfield.h @@ -0,0 +1,508 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_BITFIELD_H +#define EFX_BITFIELD_H + +/* + * Efx bitfield access + * + * Efx NICs make extensive use of bitfields up to 128 bits + * wide. Since there is no native 128-bit datatype on most systems, + * and since 64-bit datatypes are inefficient on 32-bit systems and + * vice versa, we wrap accesses in a way that uses the most efficient + * datatype. + * + * The NICs are PCI devices and therefore little-endian. Since most + * of the quantities that we deal with are DMAed to/from host memory, + * we define our datatypes (efx_oword_t, efx_qword_t and + * efx_dword_t) to be little-endian. + */ + +/* Lowest bit numbers and widths */ +#define EFX_DUMMY_FIELD_LBN 0 +#define EFX_DUMMY_FIELD_WIDTH 0 +#define EFX_DWORD_0_LBN 0 +#define EFX_DWORD_0_WIDTH 32 +#define EFX_DWORD_1_LBN 32 +#define EFX_DWORD_1_WIDTH 32 +#define EFX_DWORD_2_LBN 64 +#define EFX_DWORD_2_WIDTH 32 +#define EFX_DWORD_3_LBN 96 +#define EFX_DWORD_3_WIDTH 32 + +/* Specified attribute (e.g. LBN) of the specified field */ +#define EFX_VAL(field, attribute) field ## _ ## attribute +/* Low bit number of the specified field */ +#define EFX_LOW_BIT(field) EFX_VAL(field, LBN) +/* Bit width of the specified field */ +#define EFX_WIDTH(field) EFX_VAL(field, WIDTH) +/* High bit number of the specified field */ +#define EFX_HIGH_BIT(field) (EFX_LOW_BIT(field) + EFX_WIDTH(field) - 1) +/* Mask equal in width to the specified field. + * + * For example, a field with width 5 would have a mask of 0x1f. + * + * The maximum width mask that can be generated is 64 bits. + */ +#define EFX_MASK64(field) \ + (EFX_WIDTH(field) == 64 ? ~((u64) 0) : \ + (((((u64) 1) << EFX_WIDTH(field))) - 1)) + +/* Mask equal in width to the specified field. + * + * For example, a field with width 5 would have a mask of 0x1f. + * + * The maximum width mask that can be generated is 32 bits. Use + * EFX_MASK64 for higher width fields. + */ +#define EFX_MASK32(field) \ + (EFX_WIDTH(field) == 32 ? ~((u32) 0) : \ + (((((u32) 1) << EFX_WIDTH(field))) - 1)) + +/* A doubleword (i.e. 4 byte) datatype - little-endian in HW */ +typedef union efx_dword { + __le32 u32[1]; +} efx_dword_t; + +/* A quadword (i.e. 8 byte) datatype - little-endian in HW */ +typedef union efx_qword { + __le64 u64[1]; + __le32 u32[2]; + efx_dword_t dword[2]; +} efx_qword_t; + +/* An octword (eight-word, i.e. 16 byte) datatype - little-endian in HW */ +typedef union efx_oword { + __le64 u64[2]; + efx_qword_t qword[2]; + __le32 u32[4]; + efx_dword_t dword[4]; +} efx_oword_t; + +/* Format string and value expanders for printk */ +#define EFX_DWORD_FMT "%08x" +#define EFX_QWORD_FMT "%08x:%08x" +#define EFX_OWORD_FMT "%08x:%08x:%08x:%08x" +#define EFX_DWORD_VAL(dword) \ + ((unsigned int) le32_to_cpu((dword).u32[0])) +#define EFX_QWORD_VAL(qword) \ + ((unsigned int) le32_to_cpu((qword).u32[1])), \ + ((unsigned int) le32_to_cpu((qword).u32[0])) +#define EFX_OWORD_VAL(oword) \ + ((unsigned int) le32_to_cpu((oword).u32[3])), \ + ((unsigned int) le32_to_cpu((oword).u32[2])), \ + ((unsigned int) le32_to_cpu((oword).u32[1])), \ + ((unsigned int) le32_to_cpu((oword).u32[0])) + +/* + * Extract bit field portion [low,high) from the native-endian element + * which contains bits [min,max). + * + * For example, suppose "element" represents the high 32 bits of a + * 64-bit value, and we wish to extract the bits belonging to the bit + * field occupying bits 28-45 of this 64-bit value. + * + * Then EFX_EXTRACT ( element, 32, 63, 28, 45 ) would give + * + * ( element ) << 4 + * + * The result will contain the relevant bits filled in in the range + * [0,high-low), with garbage in bits [high-low+1,...). + */ +#define EFX_EXTRACT_NATIVE(native_element, min, max, low, high) \ + (((low > max) || (high < min)) ? 0 : \ + ((low > min) ? \ + ((native_element) >> (low - min)) : \ + ((native_element) << (min - low)))) + +/* + * Extract bit field portion [low,high) from the 64-bit little-endian + * element which contains bits [min,max) + */ +#define EFX_EXTRACT64(element, min, max, low, high) \ + EFX_EXTRACT_NATIVE(le64_to_cpu(element), min, max, low, high) + +/* + * Extract bit field portion [low,high) from the 32-bit little-endian + * element which contains bits [min,max) + */ +#define EFX_EXTRACT32(element, min, max, low, high) \ + EFX_EXTRACT_NATIVE(le32_to_cpu(element), min, max, low, high) + +#define EFX_EXTRACT_OWORD64(oword, low, high) \ + (EFX_EXTRACT64((oword).u64[0], 0, 63, low, high) | \ + EFX_EXTRACT64((oword).u64[1], 64, 127, low, high)) + +#define EFX_EXTRACT_QWORD64(qword, low, high) \ + EFX_EXTRACT64((qword).u64[0], 0, 63, low, high) + +#define EFX_EXTRACT_OWORD32(oword, low, high) \ + (EFX_EXTRACT32((oword).u32[0], 0, 31, low, high) | \ + EFX_EXTRACT32((oword).u32[1], 32, 63, low, high) | \ + EFX_EXTRACT32((oword).u32[2], 64, 95, low, high) | \ + EFX_EXTRACT32((oword).u32[3], 96, 127, low, high)) + +#define EFX_EXTRACT_QWORD32(qword, low, high) \ + (EFX_EXTRACT32((qword).u32[0], 0, 31, low, high) | \ + EFX_EXTRACT32((qword).u32[1], 32, 63, low, high)) + +#define EFX_EXTRACT_DWORD(dword, low, high) \ + EFX_EXTRACT32((dword).u32[0], 0, 31, low, high) + +#define EFX_OWORD_FIELD64(oword, field) \ + (EFX_EXTRACT_OWORD64(oword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ + & EFX_MASK64(field)) + +#define EFX_QWORD_FIELD64(qword, field) \ + (EFX_EXTRACT_QWORD64(qword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ + & EFX_MASK64(field)) + +#define EFX_OWORD_FIELD32(oword, field) \ + (EFX_EXTRACT_OWORD32(oword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ + & EFX_MASK32(field)) + +#define EFX_QWORD_FIELD32(qword, field) \ + (EFX_EXTRACT_QWORD32(qword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ + & EFX_MASK32(field)) + +#define EFX_DWORD_FIELD(dword, field) \ + (EFX_EXTRACT_DWORD(dword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ + & EFX_MASK32(field)) + +#define EFX_OWORD_IS_ZERO64(oword) \ + (((oword).u64[0] | (oword).u64[1]) == (__force __le64) 0) + +#define EFX_QWORD_IS_ZERO64(qword) \ + (((qword).u64[0]) == (__force __le64) 0) + +#define EFX_OWORD_IS_ZERO32(oword) \ + (((oword).u32[0] | (oword).u32[1] | (oword).u32[2] | (oword).u32[3]) \ + == (__force __le32) 0) + +#define EFX_QWORD_IS_ZERO32(qword) \ + (((qword).u32[0] | (qword).u32[1]) == (__force __le32) 0) + +#define EFX_DWORD_IS_ZERO(dword) \ + (((dword).u32[0]) == (__force __le32) 0) + +#define EFX_OWORD_IS_ALL_ONES64(oword) \ + (((oword).u64[0] & (oword).u64[1]) == ~((__force __le64) 0)) + +#define EFX_QWORD_IS_ALL_ONES64(qword) \ + ((qword).u64[0] == ~((__force __le64) 0)) + +#define EFX_OWORD_IS_ALL_ONES32(oword) \ + (((oword).u32[0] & (oword).u32[1] & (oword).u32[2] & (oword).u32[3]) \ + == ~((__force __le32) 0)) + +#define EFX_QWORD_IS_ALL_ONES32(qword) \ + (((qword).u32[0] & (qword).u32[1]) == ~((__force __le32) 0)) + +#define EFX_DWORD_IS_ALL_ONES(dword) \ + ((dword).u32[0] == ~((__force __le32) 0)) + +#if BITS_PER_LONG == 64 +#define EFX_OWORD_FIELD EFX_OWORD_FIELD64 +#define EFX_QWORD_FIELD EFX_QWORD_FIELD64 +#define EFX_OWORD_IS_ZERO EFX_OWORD_IS_ZERO64 +#define EFX_QWORD_IS_ZERO EFX_QWORD_IS_ZERO64 +#define EFX_OWORD_IS_ALL_ONES EFX_OWORD_IS_ALL_ONES64 +#define EFX_QWORD_IS_ALL_ONES EFX_QWORD_IS_ALL_ONES64 +#else +#define EFX_OWORD_FIELD EFX_OWORD_FIELD32 +#define EFX_QWORD_FIELD EFX_QWORD_FIELD32 +#define EFX_OWORD_IS_ZERO EFX_OWORD_IS_ZERO32 +#define EFX_QWORD_IS_ZERO EFX_QWORD_IS_ZERO32 +#define EFX_OWORD_IS_ALL_ONES EFX_OWORD_IS_ALL_ONES32 +#define EFX_QWORD_IS_ALL_ONES EFX_QWORD_IS_ALL_ONES32 +#endif + +/* + * Construct bit field portion + * + * Creates the portion of the bit field [low,high) that lies within + * the range [min,max). + */ +#define EFX_INSERT_NATIVE64(min, max, low, high, value) \ + (((low > max) || (high < min)) ? 0 : \ + ((low > min) ? \ + (((u64) (value)) << (low - min)) : \ + (((u64) (value)) >> (min - low)))) + +#define EFX_INSERT_NATIVE32(min, max, low, high, value) \ + (((low > max) || (high < min)) ? 0 : \ + ((low > min) ? \ + (((u32) (value)) << (low - min)) : \ + (((u32) (value)) >> (min - low)))) + +#define EFX_INSERT_NATIVE(min, max, low, high, value) \ + ((((max - min) >= 32) || ((high - low) >= 32)) ? \ + EFX_INSERT_NATIVE64(min, max, low, high, value) : \ + EFX_INSERT_NATIVE32(min, max, low, high, value)) + +/* + * Construct bit field portion + * + * Creates the portion of the named bit field that lies within the + * range [min,max). + */ +#define EFX_INSERT_FIELD_NATIVE(min, max, field, value) \ + EFX_INSERT_NATIVE(min, max, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field), value) + +/* + * Construct bit field + * + * Creates the portion of the named bit fields that lie within the + * range [min,max). + */ +#define EFX_INSERT_FIELDS_NATIVE(min, max, \ + field1, value1, \ + field2, value2, \ + field3, value3, \ + field4, value4, \ + field5, value5, \ + field6, value6, \ + field7, value7, \ + field8, value8, \ + field9, value9, \ + field10, value10) \ + (EFX_INSERT_FIELD_NATIVE((min), (max), field1, (value1)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field2, (value2)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field3, (value3)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field4, (value4)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field5, (value5)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field6, (value6)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field7, (value7)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field8, (value8)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field9, (value9)) | \ + EFX_INSERT_FIELD_NATIVE((min), (max), field10, (value10))) + +#define EFX_INSERT_FIELDS64(...) \ + cpu_to_le64(EFX_INSERT_FIELDS_NATIVE(__VA_ARGS__)) + +#define EFX_INSERT_FIELDS32(...) \ + cpu_to_le32(EFX_INSERT_FIELDS_NATIVE(__VA_ARGS__)) + +#define EFX_POPULATE_OWORD64(oword, ...) do { \ + (oword).u64[0] = EFX_INSERT_FIELDS64(0, 63, __VA_ARGS__); \ + (oword).u64[1] = EFX_INSERT_FIELDS64(64, 127, __VA_ARGS__); \ + } while (0) + +#define EFX_POPULATE_QWORD64(qword, ...) do { \ + (qword).u64[0] = EFX_INSERT_FIELDS64(0, 63, __VA_ARGS__); \ + } while (0) + +#define EFX_POPULATE_OWORD32(oword, ...) do { \ + (oword).u32[0] = EFX_INSERT_FIELDS32(0, 31, __VA_ARGS__); \ + (oword).u32[1] = EFX_INSERT_FIELDS32(32, 63, __VA_ARGS__); \ + (oword).u32[2] = EFX_INSERT_FIELDS32(64, 95, __VA_ARGS__); \ + (oword).u32[3] = EFX_INSERT_FIELDS32(96, 127, __VA_ARGS__); \ + } while (0) + +#define EFX_POPULATE_QWORD32(qword, ...) do { \ + (qword).u32[0] = EFX_INSERT_FIELDS32(0, 31, __VA_ARGS__); \ + (qword).u32[1] = EFX_INSERT_FIELDS32(32, 63, __VA_ARGS__); \ + } while (0) + +#define EFX_POPULATE_DWORD(dword, ...) do { \ + (dword).u32[0] = EFX_INSERT_FIELDS32(0, 31, __VA_ARGS__); \ + } while (0) + +#if BITS_PER_LONG == 64 +#define EFX_POPULATE_OWORD EFX_POPULATE_OWORD64 +#define EFX_POPULATE_QWORD EFX_POPULATE_QWORD64 +#else +#define EFX_POPULATE_OWORD EFX_POPULATE_OWORD32 +#define EFX_POPULATE_QWORD EFX_POPULATE_QWORD32 +#endif + +/* Populate an octword field with various numbers of arguments */ +#define EFX_POPULATE_OWORD_10 EFX_POPULATE_OWORD +#define EFX_POPULATE_OWORD_9(oword, ...) \ + EFX_POPULATE_OWORD_10(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_OWORD_8(oword, ...) \ + EFX_POPULATE_OWORD_9(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_OWORD_7(oword, ...) \ + EFX_POPULATE_OWORD_8(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_OWORD_6(oword, ...) \ + EFX_POPULATE_OWORD_7(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_OWORD_5(oword, ...) \ + EFX_POPULATE_OWORD_6(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_OWORD_4(oword, ...) \ + EFX_POPULATE_OWORD_5(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_OWORD_3(oword, ...) \ + EFX_POPULATE_OWORD_4(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_OWORD_2(oword, ...) \ + EFX_POPULATE_OWORD_3(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_OWORD_1(oword, ...) \ + EFX_POPULATE_OWORD_2(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_ZERO_OWORD(oword) \ + EFX_POPULATE_OWORD_1(oword, EFX_DUMMY_FIELD, 0) +#define EFX_SET_OWORD(oword) \ + EFX_POPULATE_OWORD_4(oword, \ + EFX_DWORD_0, 0xffffffff, \ + EFX_DWORD_1, 0xffffffff, \ + EFX_DWORD_2, 0xffffffff, \ + EFX_DWORD_3, 0xffffffff) + +/* Populate a quadword field with various numbers of arguments */ +#define EFX_POPULATE_QWORD_10 EFX_POPULATE_QWORD +#define EFX_POPULATE_QWORD_9(qword, ...) \ + EFX_POPULATE_QWORD_10(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_QWORD_8(qword, ...) \ + EFX_POPULATE_QWORD_9(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_QWORD_7(qword, ...) \ + EFX_POPULATE_QWORD_8(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_QWORD_6(qword, ...) \ + EFX_POPULATE_QWORD_7(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_QWORD_5(qword, ...) \ + EFX_POPULATE_QWORD_6(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_QWORD_4(qword, ...) \ + EFX_POPULATE_QWORD_5(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_QWORD_3(qword, ...) \ + EFX_POPULATE_QWORD_4(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_QWORD_2(qword, ...) \ + EFX_POPULATE_QWORD_3(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_QWORD_1(qword, ...) \ + EFX_POPULATE_QWORD_2(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_ZERO_QWORD(qword) \ + EFX_POPULATE_QWORD_1(qword, EFX_DUMMY_FIELD, 0) +#define EFX_SET_QWORD(qword) \ + EFX_POPULATE_QWORD_2(qword, \ + EFX_DWORD_0, 0xffffffff, \ + EFX_DWORD_1, 0xffffffff) + +/* Populate a dword field with various numbers of arguments */ +#define EFX_POPULATE_DWORD_10 EFX_POPULATE_DWORD +#define EFX_POPULATE_DWORD_9(dword, ...) \ + EFX_POPULATE_DWORD_10(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_DWORD_8(dword, ...) \ + EFX_POPULATE_DWORD_9(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_DWORD_7(dword, ...) \ + EFX_POPULATE_DWORD_8(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_DWORD_6(dword, ...) \ + EFX_POPULATE_DWORD_7(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_DWORD_5(dword, ...) \ + EFX_POPULATE_DWORD_6(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_DWORD_4(dword, ...) \ + EFX_POPULATE_DWORD_5(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_DWORD_3(dword, ...) \ + EFX_POPULATE_DWORD_4(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_DWORD_2(dword, ...) \ + EFX_POPULATE_DWORD_3(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_POPULATE_DWORD_1(dword, ...) \ + EFX_POPULATE_DWORD_2(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__) +#define EFX_ZERO_DWORD(dword) \ + EFX_POPULATE_DWORD_1(dword, EFX_DUMMY_FIELD, 0) +#define EFX_SET_DWORD(dword) \ + EFX_POPULATE_DWORD_1(dword, EFX_DWORD_0, 0xffffffff) + +/* + * Modify a named field within an already-populated structure. Used + * for read-modify-write operations. + * + */ + +#define EFX_INVERT_OWORD(oword) do { \ + (oword).u64[0] = ~((oword).u64[0]); \ + (oword).u64[1] = ~((oword).u64[1]); \ + } while (0) + +#define EFX_INSERT_FIELD64(...) \ + cpu_to_le64(EFX_INSERT_FIELD_NATIVE(__VA_ARGS__)) + +#define EFX_INSERT_FIELD32(...) \ + cpu_to_le32(EFX_INSERT_FIELD_NATIVE(__VA_ARGS__)) + +#define EFX_INPLACE_MASK64(min, max, field) \ + EFX_INSERT_FIELD64(min, max, field, EFX_MASK64(field)) + +#define EFX_INPLACE_MASK32(min, max, field) \ + EFX_INSERT_FIELD32(min, max, field, EFX_MASK32(field)) + +#define EFX_SET_OWORD_FIELD64(oword, field, value) do { \ + (oword).u64[0] = (((oword).u64[0] \ + & ~EFX_INPLACE_MASK64(0, 63, field)) \ + | EFX_INSERT_FIELD64(0, 63, field, value)); \ + (oword).u64[1] = (((oword).u64[1] \ + & ~EFX_INPLACE_MASK64(64, 127, field)) \ + | EFX_INSERT_FIELD64(64, 127, field, value)); \ + } while (0) + +#define EFX_SET_QWORD_FIELD64(qword, field, value) do { \ + (qword).u64[0] = (((qword).u64[0] \ + & ~EFX_INPLACE_MASK64(0, 63, field)) \ + | EFX_INSERT_FIELD64(0, 63, field, value)); \ + } while (0) + +#define EFX_SET_OWORD_FIELD32(oword, field, value) do { \ + (oword).u32[0] = (((oword).u32[0] \ + & ~EFX_INPLACE_MASK32(0, 31, field)) \ + | EFX_INSERT_FIELD32(0, 31, field, value)); \ + (oword).u32[1] = (((oword).u32[1] \ + & ~EFX_INPLACE_MASK32(32, 63, field)) \ + | EFX_INSERT_FIELD32(32, 63, field, value)); \ + (oword).u32[2] = (((oword).u32[2] \ + & ~EFX_INPLACE_MASK32(64, 95, field)) \ + | EFX_INSERT_FIELD32(64, 95, field, value)); \ + (oword).u32[3] = (((oword).u32[3] \ + & ~EFX_INPLACE_MASK32(96, 127, field)) \ + | EFX_INSERT_FIELD32(96, 127, field, value)); \ + } while (0) + +#define EFX_SET_QWORD_FIELD32(qword, field, value) do { \ + (qword).u32[0] = (((qword).u32[0] \ + & ~EFX_INPLACE_MASK32(0, 31, field)) \ + | EFX_INSERT_FIELD32(0, 31, field, value)); \ + (qword).u32[1] = (((qword).u32[1] \ + & ~EFX_INPLACE_MASK32(32, 63, field)) \ + | EFX_INSERT_FIELD32(32, 63, field, value)); \ + } while (0) + +#define EFX_SET_DWORD_FIELD(dword, field, value) do { \ + (dword).u32[0] = (((dword).u32[0] \ + & ~EFX_INPLACE_MASK32(0, 31, field)) \ + | EFX_INSERT_FIELD32(0, 31, field, value)); \ + } while (0) + +#if BITS_PER_LONG == 64 +#define EFX_SET_OWORD_FIELD EFX_SET_OWORD_FIELD64 +#define EFX_SET_QWORD_FIELD EFX_SET_QWORD_FIELD64 +#else +#define EFX_SET_OWORD_FIELD EFX_SET_OWORD_FIELD32 +#define EFX_SET_QWORD_FIELD EFX_SET_QWORD_FIELD32 +#endif + +#define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \ + if (FALCON_REV(efx) >= FALCON_REV_B0) { \ + EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \ + } else { \ + EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \ + } \ +} while (0) + +#define EFX_QWORD_FIELD_VER(efx, qword, field) \ + (FALCON_REV(efx) >= FALCON_REV_B0 ? \ + EFX_QWORD_FIELD((qword), field##_B0) : \ + EFX_QWORD_FIELD((qword), field##_A1)) + +/* Used to avoid compiler warnings about shift range exceeding width + * of the data types when dma_addr_t is only 32 bits wide. + */ +#define DMA_ADDR_T_WIDTH (8 * sizeof(dma_addr_t)) +#define EFX_DMA_TYPE_WIDTH(width) \ + (((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH) +#define EFX_DMA_MAX_MASK ((DMA_ADDR_T_WIDTH == 64) ? \ + ~((u64) 0) : ~((u32) 0)) +#define EFX_DMA_MASK(mask) ((mask) & EFX_DMA_MAX_MASK) + +#endif /* EFX_BITFIELD_H */ diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c new file mode 100644 index 000000000000..eecaa6d58584 --- /dev/null +++ b/drivers/net/sfc/boards.c @@ -0,0 +1,167 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2007 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include "net_driver.h" +#include "phy.h" +#include "boards.h" +#include "efx.h" + +/* Macros for unpacking the board revision */ +/* The revision info is in host byte order. */ +#define BOARD_TYPE(_rev) (_rev >> 8) +#define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf) +#define BOARD_MINOR(_rev) (_rev & 0xf) + +/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */ +#define BLINK_INTERVAL (HZ/2) + +static void blink_led_timer(unsigned long context) +{ + struct efx_nic *efx = (struct efx_nic *)context; + struct efx_blinker *bl = &efx->board_info.blinker; + efx->board_info.set_fault_led(efx, bl->state); + bl->state = !bl->state; + if (bl->resubmit) { + bl->timer.expires = jiffies + BLINK_INTERVAL; + add_timer(&bl->timer); + } +} + +static void board_blink(struct efx_nic *efx, int blink) +{ + struct efx_blinker *blinker = &efx->board_info.blinker; + + /* The rtnl mutex serialises all ethtool ioctls, so + * nothing special needs doing here. */ + if (blink) { + blinker->resubmit = 1; + blinker->state = 0; + setup_timer(&blinker->timer, blink_led_timer, + (unsigned long)efx); + blinker->timer.expires = jiffies + BLINK_INTERVAL; + add_timer(&blinker->timer); + } else { + blinker->resubmit = 0; + if (blinker->timer.function) + del_timer_sync(&blinker->timer); + efx->board_info.set_fault_led(efx, 0); + } +} + +/***************************************************************************** + * Support for the SFE4002 + * + */ +/****************************************************************************/ +/* LED allocations. Note that on rev A0 boards the schematic and the reality + * differ: red and green are swapped. Below is the fixed (A1) layout (there + * are only 3 A0 boards in existence, so no real reason to make this + * conditional). + */ +#define SFE4002_FAULT_LED (2) /* Red */ +#define SFE4002_RX_LED (0) /* Green */ +#define SFE4002_TX_LED (1) /* Amber */ + +static int sfe4002_init_leds(struct efx_nic *efx) +{ + /* Set the TX and RX LEDs to reflect status and activity, and the + * fault LED off */ + xfp_set_led(efx, SFE4002_TX_LED, + QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT); + xfp_set_led(efx, SFE4002_RX_LED, + QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT); + xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF); + efx->board_info.blinker.led_num = SFE4002_FAULT_LED; + return 0; +} + +static void sfe4002_fault_led(struct efx_nic *efx, int state) +{ + xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON : + QUAKE_LED_OFF); +} + +static int sfe4002_init(struct efx_nic *efx) +{ + efx->board_info.init_leds = sfe4002_init_leds; + efx->board_info.set_fault_led = sfe4002_fault_led; + efx->board_info.blink = board_blink; + return 0; +} + +/* This will get expanded as board-specific details get moved out of the + * PHY drivers. */ +struct efx_board_data { + const char *ref_model; + const char *gen_type; + int (*init) (struct efx_nic *nic); +}; + +static int dummy_init(struct efx_nic *nic) +{ + return 0; +} + +static struct efx_board_data board_data[] = { + [EFX_BOARD_INVALID] = + {NULL, NULL, dummy_init}, + [EFX_BOARD_SFE4001] = + {"SFE4001", "10GBASE-T adapter", sfe4001_poweron}, + [EFX_BOARD_SFE4002] = + {"SFE4002", "XFP adapter", sfe4002_init}, +}; + +int efx_set_board_info(struct efx_nic *efx, u16 revision_info) +{ + int rc = 0; + struct efx_board_data *data; + + if (BOARD_TYPE(revision_info) >= EFX_BOARD_MAX) { + EFX_ERR(efx, "squashing unknown board type %d\n", + BOARD_TYPE(revision_info)); + revision_info = 0; + } + + if (BOARD_TYPE(revision_info) == 0) { + efx->board_info.major = 0; + efx->board_info.minor = 0; + /* For early boards that don't have revision info. there is + * only 1 board for each PHY type, so we can work it out, with + * the exception of the PHY-less boards. */ + switch (efx->phy_type) { + case PHY_TYPE_10XPRESS: + efx->board_info.type = EFX_BOARD_SFE4001; + break; + case PHY_TYPE_XFP: + efx->board_info.type = EFX_BOARD_SFE4002; + break; + default: + efx->board_info.type = 0; + break; + } + } else { + efx->board_info.type = BOARD_TYPE(revision_info); + efx->board_info.major = BOARD_MAJOR(revision_info); + efx->board_info.minor = BOARD_MINOR(revision_info); + } + + data = &board_data[efx->board_info.type]; + + /* Report the board model number or generic type for recognisable + * boards. */ + if (efx->board_info.type != 0) + EFX_INFO(efx, "board is %s rev %c%d\n", + (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC) + ? data->ref_model : data->gen_type, + 'A' + efx->board_info.major, efx->board_info.minor); + + efx->board_info.init = data->init; + + return rc; +} diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h new file mode 100644 index 000000000000..f56341d428e1 --- /dev/null +++ b/drivers/net/sfc/boards.h @@ -0,0 +1,26 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2007 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_BOARDS_H +#define EFX_BOARDS_H + +/* Board IDs (must fit in 8 bits) */ +enum efx_board_type { + EFX_BOARD_INVALID = 0, + EFX_BOARD_SFE4001 = 1, /* SFE4001 (10GBASE-T) */ + EFX_BOARD_SFE4002 = 2, + /* Insert new types before here */ + EFX_BOARD_MAX +}; + +extern int efx_set_board_info(struct efx_nic *efx, u16 revision_info); +extern int sfe4001_poweron(struct efx_nic *efx); +extern void sfe4001_poweroff(struct efx_nic *efx); + +#endif diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c new file mode 100644 index 000000000000..59edcf793c19 --- /dev/null +++ b/drivers/net/sfc/efx.c @@ -0,0 +1,2208 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2005-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/notifier.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/in.h> +#include <linux/crc32.h> +#include <linux/ethtool.h> +#include "net_driver.h" +#include "gmii.h" +#include "ethtool.h" +#include "tx.h" +#include "rx.h" +#include "efx.h" +#include "mdio_10g.h" +#include "falcon.h" +#include "workarounds.h" +#include "mac.h" + +#define EFX_MAX_MTU (9 * 1024) + +/* RX slow fill workqueue. If memory allocation fails in the fast path, + * a work item is pushed onto this work queue to retry the allocation later, + * to avoid the NIC being starved of RX buffers. Since this is a per cpu + * workqueue, there is nothing to be gained in making it per NIC + */ +static struct workqueue_struct *refill_workqueue; + +/************************************************************************** + * + * Configurable values + * + *************************************************************************/ + +/* + * Enable large receive offload (LRO) aka soft segment reassembly (SSR) + * + * This sets the default for new devices. It can be controlled later + * using ethtool. + */ +static int lro = 1; +module_param(lro, int, 0644); +MODULE_PARM_DESC(lro, "Large receive offload acceleration"); + +/* + * Use separate channels for TX and RX events + * + * Set this to 1 to use separate channels for TX and RX. It allows us to + * apply a higher level of interrupt moderation to TX events. + * + * This is forced to 0 for MSI interrupt mode as the interrupt vector + * is not written + */ +static unsigned int separate_tx_and_rx_channels = 1; + +/* This is the weight assigned to each of the (per-channel) virtual + * NAPI devices. + */ +static int napi_weight = 64; + +/* This is the time (in jiffies) between invocations of the hardware + * monitor, which checks for known hardware bugs and resets the + * hardware and driver as necessary. + */ +unsigned int efx_monitor_interval = 1 * HZ; + +/* This controls whether or not the hardware monitor will trigger a + * reset when it detects an error condition. + */ +static unsigned int monitor_reset = 1; + +/* This controls whether or not the driver will initialise devices + * with invalid MAC addresses stored in the EEPROM or flash. If true, + * such devices will be initialised with a random locally-generated + * MAC address. This allows for loading the sfc_mtd driver to + * reprogram the flash, even if the flash contents (including the MAC + * address) have previously been erased. + */ +static unsigned int allow_bad_hwaddr; + +/* Initial interrupt moderation settings. They can be modified after + * module load with ethtool. + * + * The default for RX should strike a balance between increasing the + * round-trip latency and reducing overhead. + */ +static unsigned int rx_irq_mod_usec = 60; + +/* Initial interrupt moderation settings. They can be modified after + * module load with ethtool. + * + * This default is chosen to ensure that a 10G link does not go idle + * while a TX queue is stopped after it has become full. A queue is + * restarted when it drops below half full. The time this takes (assuming + * worst case 3 descriptors per packet and 1024 descriptors) is + * 512 / 3 * 1.2 = 205 usec. + */ +static unsigned int tx_irq_mod_usec = 150; + +/* This is the first interrupt mode to try out of: + * 0 => MSI-X + * 1 => MSI + * 2 => legacy + */ +static unsigned int interrupt_mode; + +/* This is the requested number of CPUs to use for Receive-Side Scaling (RSS), + * i.e. the number of CPUs among which we may distribute simultaneous + * interrupt handling. + * + * Cards without MSI-X will only target one CPU via legacy or MSI interrupt. + * The default (0) means to assign an interrupt to each package (level II cache) + */ +static unsigned int rss_cpus; +module_param(rss_cpus, uint, 0444); +MODULE_PARM_DESC(rss_cpus, "Number of CPUs to use for Receive-Side Scaling"); + +/************************************************************************** + * + * Utility functions and prototypes + * + *************************************************************************/ +static void efx_remove_channel(struct efx_channel *channel); +static void efx_remove_port(struct efx_nic *efx); +static void efx_fini_napi(struct efx_nic *efx); +static void efx_fini_channels(struct efx_nic *efx); + +#define EFX_ASSERT_RESET_SERIALISED(efx) \ + do { \ + if ((efx->state == STATE_RUNNING) || \ + (efx->state == STATE_RESETTING)) \ + ASSERT_RTNL(); \ + } while (0) + +/************************************************************************** + * + * Event queue processing + * + *************************************************************************/ + +/* Process channel's event queue + * + * This function is responsible for processing the event queue of a + * single channel. The caller must guarantee that this function will + * never be concurrently called more than once on the same channel, + * though different channels may be being processed concurrently. + */ +static inline int efx_process_channel(struct efx_channel *channel, int rx_quota) +{ + int rxdmaqs; + struct efx_rx_queue *rx_queue; + + if (unlikely(channel->efx->reset_pending != RESET_TYPE_NONE || + !channel->enabled)) + return rx_quota; + + rxdmaqs = falcon_process_eventq(channel, &rx_quota); + + /* Deliver last RX packet. */ + if (channel->rx_pkt) { + __efx_rx_packet(channel, channel->rx_pkt, + channel->rx_pkt_csummed); + channel->rx_pkt = NULL; + } + + efx_flush_lro(channel); + efx_rx_strategy(channel); + + /* Refill descriptor rings as necessary */ + rx_queue = &channel->efx->rx_queue[0]; + while (rxdmaqs) { + if (rxdmaqs & 0x01) + efx_fast_push_rx_descriptors(rx_queue); + rx_queue++; + rxdmaqs >>= 1; + } + + return rx_quota; +} + +/* Mark channel as finished processing + * + * Note that since we will not receive further interrupts for this + * channel before we finish processing and call the eventq_read_ack() + * method, there is no need to use the interrupt hold-off timers. + */ +static inline void efx_channel_processed(struct efx_channel *channel) +{ + /* Write to EVQ_RPTR_REG. If a new event arrived in a race + * with finishing processing, a new interrupt will be raised. + */ + channel->work_pending = 0; + smp_wmb(); /* Ensure channel updated before any new interrupt. */ + falcon_eventq_read_ack(channel); +} + +/* NAPI poll handler + * + * NAPI guarantees serialisation of polls of the same device, which + * provides the guarantee required by efx_process_channel(). + */ +static int efx_poll(struct napi_struct *napi, int budget) +{ + struct efx_channel *channel = + container_of(napi, struct efx_channel, napi_str); + struct net_device *napi_dev = channel->napi_dev; + int unused; + int rx_packets; + + EFX_TRACE(channel->efx, "channel %d NAPI poll executing on CPU %d\n", + channel->channel, raw_smp_processor_id()); + + unused = efx_process_channel(channel, budget); + rx_packets = (budget - unused); + + if (rx_packets < budget) { + /* There is no race here; although napi_disable() will + * only wait for netif_rx_complete(), this isn't a problem + * since efx_channel_processed() will have no effect if + * interrupts have already been disabled. + */ + netif_rx_complete(napi_dev, napi); + efx_channel_processed(channel); + } + + return rx_packets; +} + +/* Process the eventq of the specified channel immediately on this CPU + * + * Disable hardware generated interrupts, wait for any existing + * processing to finish, then directly poll (and ack ) the eventq. + * Finally reenable NAPI and interrupts. + * + * Since we are touching interrupts the caller should hold the suspend lock + */ +void efx_process_channel_now(struct efx_channel *channel) +{ + struct efx_nic *efx = channel->efx; + + BUG_ON(!channel->used_flags); + BUG_ON(!channel->enabled); + + /* Disable interrupts and wait for ISRs to complete */ + falcon_disable_interrupts(efx); + if (efx->legacy_irq) + synchronize_irq(efx->legacy_irq); + if (channel->has_interrupt && channel->irq) + synchronize_irq(channel->irq); + + /* Wait for any NAPI processing to complete */ + napi_disable(&channel->napi_str); + + /* Poll the channel */ + (void) efx_process_channel(channel, efx->type->evq_size); + + /* Ack the eventq. This may cause an interrupt to be generated + * when they are reenabled */ + efx_channel_processed(channel); + + napi_enable(&channel->napi_str); + falcon_enable_interrupts(efx); +} + +/* Create event queue + * Event queue memory allocations are done only once. If the channel + * is reset, the memory buffer will be reused; this guards against + * errors during channel reset and also simplifies interrupt handling. + */ +static int efx_probe_eventq(struct efx_channel *channel) +{ + EFX_LOG(channel->efx, "chan %d create event queue\n", channel->channel); + + return falcon_probe_eventq(channel); +} + +/* Prepare channel's event queue */ +static int efx_init_eventq(struct efx_channel *channel) +{ + EFX_LOG(channel->efx, "chan %d init event queue\n", channel->channel); + + channel->eventq_read_ptr = 0; + + return falcon_init_eventq(channel); +} + +static void efx_fini_eventq(struct efx_channel *channel) +{ + EFX_LOG(channel->efx, "chan %d fini event queue\n", channel->channel); + + falcon_fini_eventq(channel); +} + +static void efx_remove_eventq(struct efx_channel *channel) +{ + EFX_LOG(channel->efx, "chan %d remove event queue\n", channel->channel); + + falcon_remove_eventq(channel); +} + +/************************************************************************** + * + * Channel handling + * + *************************************************************************/ + +/* Setup per-NIC RX buffer parameters. + * Calculate the rx buffer allocation parameters required to support + * the current MTU, including padding for header alignment and overruns. + */ +static void efx_calc_rx_buffer_params(struct efx_nic *efx) +{ + unsigned int order, len; + + len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) + + EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + + efx->type->rx_buffer_padding); + + /* Calculate page-order */ + for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order) + ; + + efx->rx_buffer_len = len; + efx->rx_buffer_order = order; +} + +static int efx_probe_channel(struct efx_channel *channel) +{ + struct efx_tx_queue *tx_queue; + struct efx_rx_queue *rx_queue; + int rc; + + EFX_LOG(channel->efx, "creating channel %d\n", channel->channel); + + rc = efx_probe_eventq(channel); + if (rc) + goto fail1; + + efx_for_each_channel_tx_queue(tx_queue, channel) { + rc = efx_probe_tx_queue(tx_queue); + if (rc) + goto fail2; + } + + efx_for_each_channel_rx_queue(rx_queue, channel) { + rc = efx_probe_rx_queue(rx_queue); + if (rc) + goto fail3; + } + + channel->n_rx_frm_trunc = 0; + + return 0; + + fail3: + efx_for_each_channel_rx_queue(rx_queue, channel) + efx_remove_rx_queue(rx_queue); + fail2: + efx_for_each_channel_tx_queue(tx_queue, channel) + efx_remove_tx_queue(tx_queue); + fail1: + return rc; +} + + +/* Channels are shutdown and reinitialised whilst the NIC is running + * to propagate configuration changes (mtu, checksum offload), or + * to clear hardware error conditions + */ +static int efx_init_channels(struct efx_nic *efx) +{ + struct efx_tx_queue *tx_queue; + struct efx_rx_queue *rx_queue; + struct efx_channel *channel; + int rc = 0; + + efx_calc_rx_buffer_params(efx); + + /* Initialise the channels */ + efx_for_each_channel(channel, efx) { + EFX_LOG(channel->efx, "init chan %d\n", channel->channel); + + rc = efx_init_eventq(channel); + if (rc) + goto err; + + efx_for_each_channel_tx_queue(tx_queue, channel) { + rc = efx_init_tx_queue(tx_queue); + if (rc) + goto err; + } + + /* The rx buffer allocation strategy is MTU dependent */ + efx_rx_strategy(channel); + + efx_for_each_channel_rx_queue(rx_queue, channel) { + rc = efx_init_rx_queue(rx_queue); + if (rc) + goto err; + } + + WARN_ON(channel->rx_pkt != NULL); + efx_rx_strategy(channel); + } + + return 0; + + err: + EFX_ERR(efx, "failed to initialise channel %d\n", + channel ? channel->channel : -1); + efx_fini_channels(efx); + return rc; +} + +/* This enables event queue processing and packet transmission. + * + * Note that this function is not allowed to fail, since that would + * introduce too much complexity into the suspend/resume path. + */ +static void efx_start_channel(struct efx_channel *channel) +{ + struct efx_rx_queue *rx_queue; + + EFX_LOG(channel->efx, "starting chan %d\n", channel->channel); + + if (!(channel->efx->net_dev->flags & IFF_UP)) + netif_napi_add(channel->napi_dev, &channel->napi_str, + efx_poll, napi_weight); + + channel->work_pending = 0; + channel->enabled = 1; + smp_wmb(); /* ensure channel updated before first interrupt */ + + napi_enable(&channel->napi_str); + + /* Load up RX descriptors */ + efx_for_each_channel_rx_queue(rx_queue, channel) + efx_fast_push_rx_descriptors(rx_queue); +} + +/* This disables event queue processing and packet transmission. + * This function does not guarantee that all queue processing + * (e.g. RX refill) is complete. + */ +static void efx_stop_channel(struct efx_channel *channel) +{ + struct efx_rx_queue *rx_queue; + + if (!channel->enabled) + return; + + EFX_LOG(channel->efx, "stop chan %d\n", channel->channel); + + channel->enabled = 0; + napi_disable(&channel->napi_str); + + /* Ensure that any worker threads have exited or will be no-ops */ + efx_for_each_channel_rx_queue(rx_queue, channel) { + spin_lock_bh(&rx_queue->add_lock); + spin_unlock_bh(&rx_queue->add_lock); + } +} + +static void efx_fini_channels(struct efx_nic *efx) +{ + struct efx_channel *channel; + struct efx_tx_queue *tx_queue; + struct efx_rx_queue *rx_queue; + + EFX_ASSERT_RESET_SERIALISED(efx); + BUG_ON(efx->port_enabled); + + efx_for_each_channel(channel, efx) { + EFX_LOG(channel->efx, "shut down chan %d\n", channel->channel); + + efx_for_each_channel_rx_queue(rx_queue, channel) + efx_fini_rx_queue(rx_queue); + efx_for_each_channel_tx_queue(tx_queue, channel) + efx_fini_tx_queue(tx_queue); + } + + /* Do the event queues last so that we can handle flush events + * for all DMA queues. */ + efx_for_each_channel(channel, efx) { + EFX_LOG(channel->efx, "shut down evq %d\n", channel->channel); + + efx_fini_eventq(channel); + } +} + +static void efx_remove_channel(struct efx_channel *channel) +{ + struct efx_tx_queue *tx_queue; + struct efx_rx_queue *rx_queue; + + EFX_LOG(channel->efx, "destroy chan %d\n", channel->channel); + + efx_for_each_channel_rx_queue(rx_queue, channel) + efx_remove_rx_queue(rx_queue); + efx_for_each_channel_tx_queue(tx_queue, channel) + efx_remove_tx_queue(tx_queue); + efx_remove_eventq(channel); + + channel->used_flags = 0; +} + +void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay) +{ + queue_delayed_work(refill_workqueue, &rx_queue->work, delay); +} + +/************************************************************************** + * + * Port handling + * + **************************************************************************/ + +/* This ensures that the kernel is kept informed (via + * netif_carrier_on/off) of the link status, and also maintains the + * link status's stop on the port's TX queue. + */ +static void efx_link_status_changed(struct efx_nic *efx) +{ + int carrier_ok; + + /* SFC Bug 5356: A net_dev notifier is registered, so we must ensure + * that no events are triggered between unregister_netdev() and the + * driver unloading. A more general condition is that NETDEV_CHANGE + * can only be generated between NETDEV_UP and NETDEV_DOWN */ + if (!netif_running(efx->net_dev)) + return; + + carrier_ok = netif_carrier_ok(efx->net_dev) ? 1 : 0; + if (efx->link_up != carrier_ok) { + efx->n_link_state_changes++; + + if (efx->link_up) + netif_carrier_on(efx->net_dev); + else + netif_carrier_off(efx->net_dev); + } + + /* Status message for kernel log */ + if (efx->link_up) { + struct mii_if_info *gmii = &efx->mii; + unsigned adv, lpa; + /* NONE here means direct XAUI from the controller, with no + * MDIO-attached device we can query. */ + if (efx->phy_type != PHY_TYPE_NONE) { + adv = gmii_advertised(gmii); + lpa = gmii_lpa(gmii); + } else { + lpa = GM_LPA_10000 | LPA_DUPLEX; + adv = lpa; + } + EFX_INFO(efx, "link up at %dMbps %s-duplex " + "(adv %04x lpa %04x) (MTU %d)%s\n", + (efx->link_options & GM_LPA_10000 ? 10000 : + (efx->link_options & GM_LPA_1000 ? 1000 : + (efx->link_options & GM_LPA_100 ? 100 : + 10))), + (efx->link_options & GM_LPA_DUPLEX ? + "full" : "half"), + adv, lpa, + efx->net_dev->mtu, + (efx->promiscuous ? " [PROMISC]" : "")); + } else { + EFX_INFO(efx, "link down\n"); + } + +} + +/* This call reinitialises the MAC to pick up new PHY settings. The + * caller must hold the mac_lock */ +static void __efx_reconfigure_port(struct efx_nic *efx) +{ + WARN_ON(!mutex_is_locked(&efx->mac_lock)); + + EFX_LOG(efx, "reconfiguring MAC from PHY settings on CPU %d\n", + raw_smp_processor_id()); + + falcon_reconfigure_xmac(efx); + + /* Inform kernel of loss/gain of carrier */ + efx_link_status_changed(efx); +} + +/* Reinitialise the MAC to pick up new PHY settings, even if the port is + * disabled. */ +void efx_reconfigure_port(struct efx_nic *efx) +{ + EFX_ASSERT_RESET_SERIALISED(efx); + + mutex_lock(&efx->mac_lock); + __efx_reconfigure_port(efx); + mutex_unlock(&efx->mac_lock); +} + +/* Asynchronous efx_reconfigure_port work item. To speed up efx_flush_all() + * we don't efx_reconfigure_port() if the port is disabled. Care is taken + * in efx_stop_all() and efx_start_port() to prevent PHY events being lost */ +static void efx_reconfigure_work(struct work_struct *data) +{ + struct efx_nic *efx = container_of(data, struct efx_nic, + reconfigure_work); + + mutex_lock(&efx->mac_lock); + if (efx->port_enabled) + __efx_reconfigure_port(efx); + mutex_unlock(&efx->mac_lock); +} + +static int efx_probe_port(struct efx_nic *efx) +{ + int rc; + + EFX_LOG(efx, "create port\n"); + + /* Connect up MAC/PHY operations table and read MAC address */ + rc = falcon_probe_port(efx); + if (rc) + goto err; + + /* Sanity check MAC address */ + if (is_valid_ether_addr(efx->mac_address)) { + memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN); + } else { + DECLARE_MAC_BUF(mac); + + EFX_ERR(efx, "invalid MAC address %s\n", + print_mac(mac, efx->mac_address)); + if (!allow_bad_hwaddr) { + rc = -EINVAL; + goto err; + } + random_ether_addr(efx->net_dev->dev_addr); + EFX_INFO(efx, "using locally-generated MAC %s\n", + print_mac(mac, efx->net_dev->dev_addr)); + } + + return 0; + + err: + efx_remove_port(efx); + return rc; +} + +static int efx_init_port(struct efx_nic *efx) +{ + int rc; + + EFX_LOG(efx, "init port\n"); + + /* Initialise the MAC and PHY */ + rc = falcon_init_xmac(efx); + if (rc) + return rc; + + efx->port_initialized = 1; + + /* Reconfigure port to program MAC registers */ + falcon_reconfigure_xmac(efx); + + return 0; +} + +/* Allow efx_reconfigure_port() to be scheduled, and close the window + * between efx_stop_port and efx_flush_all whereby a previously scheduled + * efx_reconfigure_port() may have been cancelled */ +static void efx_start_port(struct efx_nic *efx) +{ + EFX_LOG(efx, "start port\n"); + BUG_ON(efx->port_enabled); + + mutex_lock(&efx->mac_lock); + efx->port_enabled = 1; + __efx_reconfigure_port(efx); + mutex_unlock(&efx->mac_lock); +} + +/* Prevent efx_reconfigure_work and efx_monitor() from executing, and + * efx_set_multicast_list() from scheduling efx_reconfigure_work. + * efx_reconfigure_work can still be scheduled via NAPI processing + * until efx_flush_all() is called */ +static void efx_stop_port(struct efx_nic *efx) +{ + EFX_LOG(efx, "stop port\n"); + + mutex_lock(&efx->mac_lock); + efx->port_enabled = 0; + mutex_unlock(&efx->mac_lock); + + /* Serialise against efx_set_multicast_list() */ + if (NET_DEV_REGISTERED(efx)) { + netif_tx_lock_bh(efx->net_dev); + netif_tx_unlock_bh(efx->net_dev); + } +} + +static void efx_fini_port(struct efx_nic *efx) +{ + EFX_LOG(efx, "shut down port\n"); + + if (!efx->port_initialized) + return; + + falcon_fini_xmac(efx); + efx->port_initialized = 0; + + efx->link_up = 0; + efx_link_status_changed(efx); +} + +static void efx_remove_port(struct efx_nic *efx) +{ + EFX_LOG(efx, "destroying port\n"); + + falcon_remove_port(efx); +} + +/************************************************************************** + * + * NIC handling + * + **************************************************************************/ + +/* This configures the PCI device to enable I/O and DMA. */ +static int efx_init_io(struct efx_nic *efx) +{ + struct pci_dev *pci_dev = efx->pci_dev; + dma_addr_t dma_mask = efx->type->max_dma_mask; + int rc; + + EFX_LOG(efx, "initialising I/O\n"); + + rc = pci_enable_device(pci_dev); + if (rc) { + EFX_ERR(efx, "failed to enable PCI device\n"); + goto fail1; + } + + pci_set_master(pci_dev); + + /* Set the PCI DMA mask. Try all possibilities from our + * genuine mask down to 32 bits, because some architectures + * (e.g. x86_64 with iommu_sac_force set) will allow 40 bit + * masks event though they reject 46 bit masks. + */ + while (dma_mask > 0x7fffffffUL) { + if (pci_dma_supported(pci_dev, dma_mask) && + ((rc = pci_set_dma_mask(pci_dev, dma_mask)) == 0)) + break; + dma_mask >>= 1; + } + if (rc) { + EFX_ERR(efx, "could not find a suitable DMA mask\n"); + goto fail2; + } + EFX_LOG(efx, "using DMA mask %llx\n", (unsigned long long) dma_mask); + rc = pci_set_consistent_dma_mask(pci_dev, dma_mask); + if (rc) { + /* pci_set_consistent_dma_mask() is not *allowed* to + * fail with a mask that pci_set_dma_mask() accepted, + * but just in case... + */ + EFX_ERR(efx, "failed to set consistent DMA mask\n"); + goto fail2; + } + + efx->membase_phys = pci_resource_start(efx->pci_dev, + efx->type->mem_bar); + rc = pci_request_region(pci_dev, efx->type->mem_bar, "sfc"); + if (rc) { + EFX_ERR(efx, "request for memory BAR failed\n"); + rc = -EIO; + goto fail3; + } + efx->membase = ioremap_nocache(efx->membase_phys, + efx->type->mem_map_size); + if (!efx->membase) { + EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n", + efx->type->mem_bar, efx->membase_phys, + efx->type->mem_map_size); + rc = -ENOMEM; + goto fail4; + } + EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n", + efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size, + efx->membase); + + return 0; + + fail4: + release_mem_region(efx->membase_phys, efx->type->mem_map_size); + fail3: + efx->membase_phys = 0UL; + fail2: + pci_disable_device(efx->pci_dev); + fail1: + return rc; +} + +static void efx_fini_io(struct efx_nic *efx) +{ + EFX_LOG(efx, "shutting down I/O\n"); + + if (efx->membase) { + iounmap(efx->membase); + efx->membase = NULL; + } + + if (efx->membase_phys) { + pci_release_region(efx->pci_dev, efx->type->mem_bar); + efx->membase_phys = 0UL; + } + + pci_disable_device(efx->pci_dev); +} + +/* Probe the number and type of interrupts we are able to obtain. */ +static void efx_probe_interrupts(struct efx_nic *efx) +{ + int max_channel = efx->type->phys_addr_channels - 1; + struct msix_entry xentries[EFX_MAX_CHANNELS]; + int rc, i; + + if (efx->interrupt_mode == EFX_INT_MODE_MSIX) { + BUG_ON(!pci_find_capability(efx->pci_dev, PCI_CAP_ID_MSIX)); + + efx->rss_queues = rss_cpus ? rss_cpus : num_online_cpus(); + efx->rss_queues = min(efx->rss_queues, max_channel + 1); + efx->rss_queues = min(efx->rss_queues, EFX_MAX_CHANNELS); + + /* Request maximum number of MSI interrupts, and fill out + * the channel interrupt information the allowed allocation */ + for (i = 0; i < efx->rss_queues; i++) + xentries[i].entry = i; + rc = pci_enable_msix(efx->pci_dev, xentries, efx->rss_queues); + if (rc > 0) { + EFX_BUG_ON_PARANOID(rc >= efx->rss_queues); + efx->rss_queues = rc; + rc = pci_enable_msix(efx->pci_dev, xentries, + efx->rss_queues); + } + + if (rc == 0) { + for (i = 0; i < efx->rss_queues; i++) { + efx->channel[i].has_interrupt = 1; + efx->channel[i].irq = xentries[i].vector; + } + } else { + /* Fall back to single channel MSI */ + efx->interrupt_mode = EFX_INT_MODE_MSI; + EFX_ERR(efx, "could not enable MSI-X\n"); + } + } + + /* Try single interrupt MSI */ + if (efx->interrupt_mode == EFX_INT_MODE_MSI) { + efx->rss_queues = 1; + rc = pci_enable_msi(efx->pci_dev); + if (rc == 0) { + efx->channel[0].irq = efx->pci_dev->irq; + efx->channel[0].has_interrupt = 1; + } else { + EFX_ERR(efx, "could not enable MSI\n"); + efx->interrupt_mode = EFX_INT_MODE_LEGACY; + } + } + + /* Assume legacy interrupts */ + if (efx->interrupt_mode == EFX_INT_MODE_LEGACY) { + efx->rss_queues = 1; + /* Every channel is interruptible */ + for (i = 0; i < EFX_MAX_CHANNELS; i++) + efx->channel[i].has_interrupt = 1; + efx->legacy_irq = efx->pci_dev->irq; + } +} + +static void efx_remove_interrupts(struct efx_nic *efx) +{ + struct efx_channel *channel; + + /* Remove MSI/MSI-X interrupts */ + efx_for_each_channel_with_interrupt(channel, efx) + channel->irq = 0; + pci_disable_msi(efx->pci_dev); + pci_disable_msix(efx->pci_dev); + + /* Remove legacy interrupt */ + efx->legacy_irq = 0; +} + +/* Select number of used resources + * Should be called after probe_interrupts() + */ +static void efx_select_used(struct efx_nic *efx) +{ + struct efx_tx_queue *tx_queue; + struct efx_rx_queue *rx_queue; + int i; + + /* TX queues. One per port per channel with TX capability + * (more than one per port won't work on Linux, due to out + * of order issues... but will be fine on Solaris) + */ + tx_queue = &efx->tx_queue[0]; + + /* Perform this for each channel with TX capabilities. + * At the moment, we only support a single TX queue + */ + tx_queue->used = 1; + if ((!EFX_INT_MODE_USE_MSI(efx)) && separate_tx_and_rx_channels) + tx_queue->channel = &efx->channel[1]; + else + tx_queue->channel = &efx->channel[0]; + tx_queue->channel->used_flags |= EFX_USED_BY_TX; + tx_queue++; + + /* RX queues. Each has a dedicated channel. */ + for (i = 0; i < EFX_MAX_RX_QUEUES; i++) { + rx_queue = &efx->rx_queue[i]; + + if (i < efx->rss_queues) { + rx_queue->used = 1; + /* If we allow multiple RX queues per channel + * we need to decide that here + */ + rx_queue->channel = &efx->channel[rx_queue->queue]; + rx_queue->channel->used_flags |= EFX_USED_BY_RX; + rx_queue++; + } + } +} + +static int efx_probe_nic(struct efx_nic *efx) +{ + int rc; + + EFX_LOG(efx, "creating NIC\n"); + + /* Carry out hardware-type specific initialisation */ + rc = falcon_probe_nic(efx); + if (rc) + return rc; + + /* Determine the number of channels and RX queues by trying to hook + * in MSI-X interrupts. */ + efx_probe_interrupts(efx); + + /* Determine number of RX queues and TX queues */ + efx_select_used(efx); + + /* Initialise the interrupt moderation settings */ + efx_init_irq_moderation(efx, tx_irq_mod_usec, rx_irq_mod_usec); + + return 0; +} + +static void efx_remove_nic(struct efx_nic *efx) +{ + EFX_LOG(efx, "destroying NIC\n"); + + efx_remove_interrupts(efx); + falcon_remove_nic(efx); +} + +/************************************************************************** + * + * NIC startup/shutdown + * + *************************************************************************/ + +static int efx_probe_all(struct efx_nic *efx) +{ + struct efx_channel *channel; + int rc; + + /* Create NIC */ + rc = efx_probe_nic(efx); + if (rc) { + EFX_ERR(efx, "failed to create NIC\n"); + goto fail1; + } + + /* Create port */ + rc = efx_probe_port(efx); + if (rc) { + EFX_ERR(efx, "failed to create port\n"); + goto fail2; + } + + /* Create channels */ + efx_for_each_channel(channel, efx) { + rc = efx_probe_channel(channel); + if (rc) { + EFX_ERR(efx, "failed to create channel %d\n", + channel->channel); + goto fail3; + } + } + + return 0; + + fail3: + efx_for_each_channel(channel, efx) + efx_remove_channel(channel); + efx_remove_port(efx); + fail2: + efx_remove_nic(efx); + fail1: + return rc; +} + +/* Called after previous invocation(s) of efx_stop_all, restarts the + * port, kernel transmit queue, NAPI processing and hardware interrupts, + * and ensures that the port is scheduled to be reconfigured. + * This function is safe to call multiple times when the NIC is in any + * state. */ +static void efx_start_all(struct efx_nic *efx) +{ + struct efx_channel *channel; + + EFX_ASSERT_RESET_SERIALISED(efx); + + /* Check that it is appropriate to restart the interface. All + * of these flags are safe to read under just the rtnl lock */ + if (efx->port_enabled) + return; + if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT)) + return; + if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev)) + return; + + /* Mark the port as enabled so port reconfigurations can start, then + * restart the transmit interface early so the watchdog timer stops */ + efx_start_port(efx); + efx_wake_queue(efx); + + efx_for_each_channel(channel, efx) + efx_start_channel(channel); + + falcon_enable_interrupts(efx); + + /* Start hardware monitor if we're in RUNNING */ + if (efx->state == STATE_RUNNING) + queue_delayed_work(efx->workqueue, &efx->monitor_work, + efx_monitor_interval); +} + +/* Flush all delayed work. Should only be called when no more delayed work + * will be scheduled. This doesn't flush pending online resets (efx_reset), + * since we're holding the rtnl_lock at this point. */ +static void efx_flush_all(struct efx_nic *efx) +{ + struct efx_rx_queue *rx_queue; + + /* Make sure the hardware monitor is stopped */ + cancel_delayed_work_sync(&efx->monitor_work); + + /* Ensure that all RX slow refills are complete. */ + efx_for_each_rx_queue(rx_queue, efx) { + cancel_delayed_work_sync(&rx_queue->work); + } + + /* Stop scheduled port reconfigurations */ + cancel_work_sync(&efx->reconfigure_work); + +} + +/* Quiesce hardware and software without bringing the link down. + * Safe to call multiple times, when the nic and interface is in any + * state. The caller is guaranteed to subsequently be in a position + * to modify any hardware and software state they see fit without + * taking locks. */ +static void efx_stop_all(struct efx_nic *efx) +{ + struct efx_channel *channel; + + EFX_ASSERT_RESET_SERIALISED(efx); + + /* port_enabled can be read safely under the rtnl lock */ + if (!efx->port_enabled) + return; + + /* Disable interrupts and wait for ISR to complete */ + falcon_disable_interrupts(efx); + if (efx->legacy_irq) + synchronize_irq(efx->legacy_irq); + efx_for_each_channel_with_interrupt(channel, efx) + if (channel->irq) + synchronize_irq(channel->irq); + + /* Stop all NAPI processing and synchronous rx refills */ + efx_for_each_channel(channel, efx) + efx_stop_channel(channel); + + /* Stop all asynchronous port reconfigurations. Since all + * event processing has already been stopped, there is no + * window to loose phy events */ + efx_stop_port(efx); + + /* Flush reconfigure_work, refill_workqueue, monitor_work */ + efx_flush_all(efx); + + /* Isolate the MAC from the TX and RX engines, so that queue + * flushes will complete in a timely fashion. */ + falcon_deconfigure_mac_wrapper(efx); + falcon_drain_tx_fifo(efx); + + /* Stop the kernel transmit interface late, so the watchdog + * timer isn't ticking over the flush */ + efx_stop_queue(efx); + if (NET_DEV_REGISTERED(efx)) { + netif_tx_lock_bh(efx->net_dev); + netif_tx_unlock_bh(efx->net_dev); + } +} + +static void efx_remove_all(struct efx_nic *efx) +{ + struct efx_channel *channel; + + efx_for_each_channel(channel, efx) + efx_remove_channel(channel); + efx_remove_port(efx); + efx_remove_nic(efx); +} + +/* A convinience function to safely flush all the queues */ +int efx_flush_queues(struct efx_nic *efx) +{ + int rc; + + EFX_ASSERT_RESET_SERIALISED(efx); + + efx_stop_all(efx); + + efx_fini_channels(efx); + rc = efx_init_channels(efx); + if (rc) { + efx_schedule_reset(efx, RESET_TYPE_DISABLE); + return rc; + } + + efx_start_all(efx); + + return 0; +} + +/************************************************************************** + * + * Interrupt moderation + * + **************************************************************************/ + +/* Set interrupt moderation parameters */ +void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs, int rx_usecs) +{ + struct efx_tx_queue *tx_queue; + struct efx_rx_queue *rx_queue; + + EFX_ASSERT_RESET_SERIALISED(efx); + + efx_for_each_tx_queue(tx_queue, efx) + tx_queue->channel->irq_moderation = tx_usecs; + + efx_for_each_rx_queue(rx_queue, efx) + rx_queue->channel->irq_moderation = rx_usecs; +} + +/************************************************************************** + * + * Hardware monitor + * + **************************************************************************/ + +/* Run periodically off the general workqueue. Serialised against + * efx_reconfigure_port via the mac_lock */ +static void efx_monitor(struct work_struct *data) +{ + struct efx_nic *efx = container_of(data, struct efx_nic, + monitor_work.work); + int rc = 0; + + EFX_TRACE(efx, "hardware monitor executing on CPU %d\n", + raw_smp_processor_id()); + + + /* If the mac_lock is already held then it is likely a port + * reconfiguration is already in place, which will likely do + * most of the work of check_hw() anyway. */ + if (!mutex_trylock(&efx->mac_lock)) { + queue_delayed_work(efx->workqueue, &efx->monitor_work, + efx_monitor_interval); + return; + } + + if (efx->port_enabled) + rc = falcon_check_xmac(efx); + mutex_unlock(&efx->mac_lock); + + if (rc) { + if (monitor_reset) { + EFX_ERR(efx, "hardware monitor detected a fault: " + "triggering reset\n"); + efx_schedule_reset(efx, RESET_TYPE_MONITOR); + } else { + EFX_ERR(efx, "hardware monitor detected a fault, " + "skipping reset\n"); + } + } + + queue_delayed_work(efx->workqueue, &efx->monitor_work, + efx_monitor_interval); +} + +/************************************************************************** + * + * ioctls + * + *************************************************************************/ + +/* Net device ioctl + * Context: process, rtnl_lock() held. + */ +static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) +{ + struct efx_nic *efx = net_dev->priv; + + EFX_ASSERT_RESET_SERIALISED(efx); + + return generic_mii_ioctl(&efx->mii, if_mii(ifr), cmd, NULL); +} + +/************************************************************************** + * + * NAPI interface + * + **************************************************************************/ + +static int efx_init_napi(struct efx_nic *efx) +{ + struct efx_channel *channel; + int rc; + + efx_for_each_channel(channel, efx) { + channel->napi_dev = efx->net_dev; + rc = efx_lro_init(&channel->lro_mgr, efx); + if (rc) + goto err; + } + return 0; + err: + efx_fini_napi(efx); + return rc; +} + +static void efx_fini_napi(struct efx_nic *efx) +{ + struct efx_channel *channel; + + efx_for_each_channel(channel, efx) { + efx_lro_fini(&channel->lro_mgr); + channel->napi_dev = NULL; + } +} + +/************************************************************************** + * + * Kernel netpoll interface + * + *************************************************************************/ + +#ifdef CONFIG_NET_POLL_CONTROLLER + +/* Although in the common case interrupts will be disabled, this is not + * guaranteed. However, all our work happens inside the NAPI callback, + * so no locking is required. + */ +static void efx_netpoll(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + struct efx_channel *channel; + + efx_for_each_channel_with_interrupt(channel, efx) + efx_schedule_channel(channel); +} + +#endif + +/************************************************************************** + * + * Kernel net device interface + * + *************************************************************************/ + +/* Context: process, rtnl_lock() held. */ +static int efx_net_open(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + EFX_ASSERT_RESET_SERIALISED(efx); + + EFX_LOG(efx, "opening device %s on CPU %d\n", net_dev->name, + raw_smp_processor_id()); + + efx_start_all(efx); + return 0; +} + +/* Context: process, rtnl_lock() held. + * Note that the kernel will ignore our return code; this method + * should really be a void. + */ +static int efx_net_stop(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + int rc; + + EFX_LOG(efx, "closing %s on CPU %d\n", net_dev->name, + raw_smp_processor_id()); + + /* Stop the device and flush all the channels */ + efx_stop_all(efx); + efx_fini_channels(efx); + rc = efx_init_channels(efx); + if (rc) + efx_schedule_reset(efx, RESET_TYPE_DISABLE); + + return 0; +} + +/* Context: process, dev_base_lock held, non-blocking. */ +static struct net_device_stats *efx_net_stats(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + struct efx_mac_stats *mac_stats = &efx->mac_stats; + struct net_device_stats *stats = &net_dev->stats; + + if (!spin_trylock(&efx->stats_lock)) + return stats; + if (efx->state == STATE_RUNNING) { + falcon_update_stats_xmac(efx); + falcon_update_nic_stats(efx); + } + spin_unlock(&efx->stats_lock); + + stats->rx_packets = mac_stats->rx_packets; + stats->tx_packets = mac_stats->tx_packets; + stats->rx_bytes = mac_stats->rx_bytes; + stats->tx_bytes = mac_stats->tx_bytes; + stats->multicast = mac_stats->rx_multicast; + stats->collisions = mac_stats->tx_collision; + stats->rx_length_errors = (mac_stats->rx_gtjumbo + + mac_stats->rx_length_error); + stats->rx_over_errors = efx->n_rx_nodesc_drop_cnt; + stats->rx_crc_errors = mac_stats->rx_bad; + stats->rx_frame_errors = mac_stats->rx_align_error; + stats->rx_fifo_errors = mac_stats->rx_overflow; + stats->rx_missed_errors = mac_stats->rx_missed; + stats->tx_window_errors = mac_stats->tx_late_collision; + + stats->rx_errors = (stats->rx_length_errors + + stats->rx_over_errors + + stats->rx_crc_errors + + stats->rx_frame_errors + + stats->rx_fifo_errors + + stats->rx_missed_errors + + mac_stats->rx_symbol_error); + stats->tx_errors = (stats->tx_window_errors + + mac_stats->tx_bad); + + return stats; +} + +/* Context: netif_tx_lock held, BHs disabled. */ +static void efx_watchdog(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + + EFX_ERR(efx, "TX stuck with stop_count=%d port_enabled=%d: %s\n", + atomic_read(&efx->netif_stop_count), efx->port_enabled, + monitor_reset ? "resetting channels" : "skipping reset"); + + if (monitor_reset) + efx_schedule_reset(efx, RESET_TYPE_MONITOR); +} + + +/* Context: process, rtnl_lock() held. */ +static int efx_change_mtu(struct net_device *net_dev, int new_mtu) +{ + struct efx_nic *efx = net_dev->priv; + int rc = 0; + + EFX_ASSERT_RESET_SERIALISED(efx); + + if (new_mtu > EFX_MAX_MTU) + return -EINVAL; + + efx_stop_all(efx); + + EFX_LOG(efx, "changing MTU to %d\n", new_mtu); + + efx_fini_channels(efx); + net_dev->mtu = new_mtu; + rc = efx_init_channels(efx); + if (rc) + goto fail; + + efx_start_all(efx); + return rc; + + fail: + efx_schedule_reset(efx, RESET_TYPE_DISABLE); + return rc; +} + +static int efx_set_mac_address(struct net_device *net_dev, void *data) +{ + struct efx_nic *efx = net_dev->priv; + struct sockaddr *addr = data; + char *new_addr = addr->sa_data; + + EFX_ASSERT_RESET_SERIALISED(efx); + + if (!is_valid_ether_addr(new_addr)) { + DECLARE_MAC_BUF(mac); + EFX_ERR(efx, "invalid ethernet MAC address requested: %s\n", + print_mac(mac, new_addr)); + return -EINVAL; + } + + memcpy(net_dev->dev_addr, new_addr, net_dev->addr_len); + + /* Reconfigure the MAC */ + efx_reconfigure_port(efx); + + return 0; +} + +/* Context: netif_tx_lock held, BHs disabled. */ +static void efx_set_multicast_list(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + struct dev_mc_list *mc_list = net_dev->mc_list; + union efx_multicast_hash *mc_hash = &efx->multicast_hash; + int promiscuous; + u32 crc; + int bit; + int i; + + /* Set per-MAC promiscuity flag and reconfigure MAC if necessary */ + promiscuous = (net_dev->flags & IFF_PROMISC) ? 1 : 0; + if (efx->promiscuous != promiscuous) { + efx->promiscuous = promiscuous; + /* Close the window between efx_stop_port() and efx_flush_all() + * by only queuing work when the port is enabled. */ + if (efx->port_enabled) + queue_work(efx->workqueue, &efx->reconfigure_work); + } + + /* Build multicast hash table */ + if (promiscuous || (net_dev->flags & IFF_ALLMULTI)) { + memset(mc_hash, 0xff, sizeof(*mc_hash)); + } else { + memset(mc_hash, 0x00, sizeof(*mc_hash)); + for (i = 0; i < net_dev->mc_count; i++) { + crc = ether_crc_le(ETH_ALEN, mc_list->dmi_addr); + bit = crc & (EFX_MCAST_HASH_ENTRIES - 1); + set_bit_le(bit, mc_hash->byte); + mc_list = mc_list->next; + } + } + + /* Create and activate new global multicast hash table */ + falcon_set_multicast_hash(efx); +} + +static int efx_netdev_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct net_device *net_dev = (struct net_device *)ptr; + + if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) { + struct efx_nic *efx = net_dev->priv; + + strcpy(efx->name, net_dev->name); + } + + return NOTIFY_DONE; +} + +static struct notifier_block efx_netdev_notifier = { + .notifier_call = efx_netdev_event, +}; + +static int efx_register_netdev(struct efx_nic *efx) +{ + struct net_device *net_dev = efx->net_dev; + int rc; + + net_dev->watchdog_timeo = 5 * HZ; + net_dev->irq = efx->pci_dev->irq; + net_dev->open = efx_net_open; + net_dev->stop = efx_net_stop; + net_dev->get_stats = efx_net_stats; + net_dev->tx_timeout = &efx_watchdog; + net_dev->hard_start_xmit = efx_hard_start_xmit; + net_dev->do_ioctl = efx_ioctl; + net_dev->change_mtu = efx_change_mtu; + net_dev->set_mac_address = efx_set_mac_address; + net_dev->set_multicast_list = efx_set_multicast_list; +#ifdef CONFIG_NET_POLL_CONTROLLER + net_dev->poll_controller = efx_netpoll; +#endif + SET_NETDEV_DEV(net_dev, &efx->pci_dev->dev); + SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops); + + /* Always start with carrier off; PHY events will detect the link */ + netif_carrier_off(efx->net_dev); + + /* Clear MAC statistics */ + falcon_update_stats_xmac(efx); + memset(&efx->mac_stats, 0, sizeof(efx->mac_stats)); + + rc = register_netdev(net_dev); + if (rc) { + EFX_ERR(efx, "could not register net dev\n"); + return rc; + } + strcpy(efx->name, net_dev->name); + + return 0; +} + +static void efx_unregister_netdev(struct efx_nic *efx) +{ + struct efx_tx_queue *tx_queue; + + if (!efx->net_dev) + return; + + BUG_ON(efx->net_dev->priv != efx); + + /* Free up any skbs still remaining. This has to happen before + * we try to unregister the netdev as running their destructors + * may be needed to get the device ref. count to 0. */ + efx_for_each_tx_queue(tx_queue, efx) + efx_release_tx_buffers(tx_queue); + + if (NET_DEV_REGISTERED(efx)) { + strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name)); + unregister_netdev(efx->net_dev); + } +} + +/************************************************************************** + * + * Device reset and suspend + * + **************************************************************************/ + +/* The final hardware and software finalisation before reset. */ +static int efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) +{ + int rc; + + EFX_ASSERT_RESET_SERIALISED(efx); + + rc = falcon_xmac_get_settings(efx, ecmd); + if (rc) { + EFX_ERR(efx, "could not back up PHY settings\n"); + goto fail; + } + + efx_fini_channels(efx); + return 0; + + fail: + return rc; +} + +/* The first part of software initialisation after a hardware reset + * This function does not handle serialisation with the kernel, it + * assumes the caller has done this */ +static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd) +{ + int rc; + + rc = efx_init_channels(efx); + if (rc) + goto fail1; + + /* Restore MAC and PHY settings. */ + rc = falcon_xmac_set_settings(efx, ecmd); + if (rc) { + EFX_ERR(efx, "could not restore PHY settings\n"); + goto fail2; + } + + return 0; + + fail2: + efx_fini_channels(efx); + fail1: + return rc; +} + +/* Reset the NIC as transparently as possible. Do not reset the PHY + * Note that the reset may fail, in which case the card will be left + * in a most-probably-unusable state. + * + * This function will sleep. You cannot reset from within an atomic + * state; use efx_schedule_reset() instead. + * + * Grabs the rtnl_lock. + */ +static int efx_reset(struct efx_nic *efx) +{ + struct ethtool_cmd ecmd; + enum reset_type method = efx->reset_pending; + int rc; + + /* Serialise with kernel interfaces */ + rtnl_lock(); + + /* If we're not RUNNING then don't reset. Leave the reset_pending + * flag set so that efx_pci_probe_main will be retried */ + if (efx->state != STATE_RUNNING) { + EFX_INFO(efx, "scheduled reset quenched. NIC not RUNNING\n"); + goto unlock_rtnl; + } + + efx->state = STATE_RESETTING; + EFX_INFO(efx, "resetting (%d)\n", method); + + /* The net_dev->get_stats handler is quite slow, and will fail + * if a fetch is pending over reset. Serialise against it. */ + spin_lock(&efx->stats_lock); + spin_unlock(&efx->stats_lock); + + efx_stop_all(efx); + mutex_lock(&efx->mac_lock); + + rc = efx_reset_down(efx, &ecmd); + if (rc) + goto fail1; + + rc = falcon_reset_hw(efx, method); + if (rc) { + EFX_ERR(efx, "failed to reset hardware\n"); + goto fail2; + } + + /* Allow resets to be rescheduled. */ + efx->reset_pending = RESET_TYPE_NONE; + + /* Reinitialise bus-mastering, which may have been turned off before + * the reset was scheduled. This is still appropriate, even in the + * RESET_TYPE_DISABLE since this driver generally assumes the hardware + * can respond to requests. */ + pci_set_master(efx->pci_dev); + + /* Reinitialise device. This is appropriate in the RESET_TYPE_DISABLE + * case so the driver can talk to external SRAM */ + rc = falcon_init_nic(efx); + if (rc) { + EFX_ERR(efx, "failed to initialise NIC\n"); + goto fail3; + } + + /* Leave device stopped if necessary */ + if (method == RESET_TYPE_DISABLE) { + /* Reinitialise the device anyway so the driver unload sequence + * can talk to the external SRAM */ + (void) falcon_init_nic(efx); + rc = -EIO; + goto fail4; + } + + rc = efx_reset_up(efx, &ecmd); + if (rc) + goto fail5; + + mutex_unlock(&efx->mac_lock); + EFX_LOG(efx, "reset complete\n"); + + efx->state = STATE_RUNNING; + efx_start_all(efx); + + unlock_rtnl: + rtnl_unlock(); + return 0; + + fail5: + fail4: + fail3: + fail2: + fail1: + EFX_ERR(efx, "has been disabled\n"); + efx->state = STATE_DISABLED; + + mutex_unlock(&efx->mac_lock); + rtnl_unlock(); + efx_unregister_netdev(efx); + efx_fini_port(efx); + return rc; +} + +/* The worker thread exists so that code that cannot sleep can + * schedule a reset for later. + */ +static void efx_reset_work(struct work_struct *data) +{ + struct efx_nic *nic = container_of(data, struct efx_nic, reset_work); + + efx_reset(nic); +} + +void efx_schedule_reset(struct efx_nic *efx, enum reset_type type) +{ + enum reset_type method; + + if (efx->reset_pending != RESET_TYPE_NONE) { + EFX_INFO(efx, "quenching already scheduled reset\n"); + return; + } + + switch (type) { + case RESET_TYPE_INVISIBLE: + case RESET_TYPE_ALL: + case RESET_TYPE_WORLD: + case RESET_TYPE_DISABLE: + method = type; + break; + case RESET_TYPE_RX_RECOVERY: + case RESET_TYPE_RX_DESC_FETCH: + case RESET_TYPE_TX_DESC_FETCH: + case RESET_TYPE_TX_SKIP: + method = RESET_TYPE_INVISIBLE; + break; + default: + method = RESET_TYPE_ALL; + break; + } + + if (method != type) + EFX_LOG(efx, "scheduling reset (%d:%d)\n", type, method); + else + EFX_LOG(efx, "scheduling reset (%d)\n", method); + + efx->reset_pending = method; + + queue_work(efx->workqueue, &efx->reset_work); +} + +/************************************************************************** + * + * List of NICs we support + * + **************************************************************************/ + +/* PCI device ID table */ +static struct pci_device_id efx_pci_table[] __devinitdata = { + {PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID), + .driver_data = (unsigned long) &falcon_a_nic_type}, + {PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID), + .driver_data = (unsigned long) &falcon_b_nic_type}, + {0} /* end of list */ +}; + +/************************************************************************** + * + * Dummy PHY/MAC/Board operations + * + * Can be used where the MAC does not implement this operation + * Needed so all function pointers are valid and do not have to be tested + * before use + * + **************************************************************************/ +int efx_port_dummy_op_int(struct efx_nic *efx) +{ + return 0; +} +void efx_port_dummy_op_void(struct efx_nic *efx) {} +void efx_port_dummy_op_blink(struct efx_nic *efx, int blink) {} + +static struct efx_phy_operations efx_dummy_phy_operations = { + .init = efx_port_dummy_op_int, + .reconfigure = efx_port_dummy_op_void, + .check_hw = efx_port_dummy_op_int, + .fini = efx_port_dummy_op_void, + .clear_interrupt = efx_port_dummy_op_void, + .reset_xaui = efx_port_dummy_op_void, +}; + +/* Dummy board operations */ +static int efx_nic_dummy_op_int(struct efx_nic *nic) +{ + return 0; +} + +static struct efx_board efx_dummy_board_info = { + .init = efx_nic_dummy_op_int, + .init_leds = efx_port_dummy_op_int, + .set_fault_led = efx_port_dummy_op_blink, +}; + +/************************************************************************** + * + * Data housekeeping + * + **************************************************************************/ + +/* This zeroes out and then fills in the invariants in a struct + * efx_nic (including all sub-structures). + */ +static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type, + struct pci_dev *pci_dev, struct net_device *net_dev) +{ + struct efx_channel *channel; + struct efx_tx_queue *tx_queue; + struct efx_rx_queue *rx_queue; + int i, rc; + + /* Initialise common structures */ + memset(efx, 0, sizeof(*efx)); + spin_lock_init(&efx->biu_lock); + spin_lock_init(&efx->phy_lock); + INIT_WORK(&efx->reset_work, efx_reset_work); + INIT_DELAYED_WORK(&efx->monitor_work, efx_monitor); + efx->pci_dev = pci_dev; + efx->state = STATE_INIT; + efx->reset_pending = RESET_TYPE_NONE; + strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name)); + efx->board_info = efx_dummy_board_info; + + efx->net_dev = net_dev; + efx->rx_checksum_enabled = 1; + spin_lock_init(&efx->netif_stop_lock); + spin_lock_init(&efx->stats_lock); + mutex_init(&efx->mac_lock); + efx->phy_op = &efx_dummy_phy_operations; + efx->mii.dev = net_dev; + INIT_WORK(&efx->reconfigure_work, efx_reconfigure_work); + atomic_set(&efx->netif_stop_count, 1); + + for (i = 0; i < EFX_MAX_CHANNELS; i++) { + channel = &efx->channel[i]; + channel->efx = efx; + channel->channel = i; + channel->evqnum = i; + channel->work_pending = 0; + } + for (i = 0; i < EFX_MAX_TX_QUEUES; i++) { + tx_queue = &efx->tx_queue[i]; + tx_queue->efx = efx; + tx_queue->queue = i; + tx_queue->buffer = NULL; + tx_queue->channel = &efx->channel[0]; /* for safety */ + } + for (i = 0; i < EFX_MAX_RX_QUEUES; i++) { + rx_queue = &efx->rx_queue[i]; + rx_queue->efx = efx; + rx_queue->queue = i; + rx_queue->channel = &efx->channel[0]; /* for safety */ + rx_queue->buffer = NULL; + spin_lock_init(&rx_queue->add_lock); + INIT_DELAYED_WORK(&rx_queue->work, efx_rx_work); + } + + efx->type = type; + + /* Sanity-check NIC type */ + EFX_BUG_ON_PARANOID(efx->type->txd_ring_mask & + (efx->type->txd_ring_mask + 1)); + EFX_BUG_ON_PARANOID(efx->type->rxd_ring_mask & + (efx->type->rxd_ring_mask + 1)); + EFX_BUG_ON_PARANOID(efx->type->evq_size & + (efx->type->evq_size - 1)); + /* As close as we can get to guaranteeing that we don't overflow */ + EFX_BUG_ON_PARANOID(efx->type->evq_size < + (efx->type->txd_ring_mask + 1 + + efx->type->rxd_ring_mask + 1)); + EFX_BUG_ON_PARANOID(efx->type->phys_addr_channels > EFX_MAX_CHANNELS); + + /* Higher numbered interrupt modes are less capable! */ + efx->interrupt_mode = max(efx->type->max_interrupt_mode, + interrupt_mode); + + efx->workqueue = create_singlethread_workqueue("sfc_work"); + if (!efx->workqueue) { + rc = -ENOMEM; + goto fail1; + } + + return 0; + + fail1: + return rc; +} + +static void efx_fini_struct(struct efx_nic *efx) +{ + if (efx->workqueue) { + destroy_workqueue(efx->workqueue); + efx->workqueue = NULL; + } +} + +/************************************************************************** + * + * PCI interface + * + **************************************************************************/ + +/* Main body of final NIC shutdown code + * This is called only at module unload (or hotplug removal). + */ +static void efx_pci_remove_main(struct efx_nic *efx) +{ + EFX_ASSERT_RESET_SERIALISED(efx); + + /* Skip everything if we never obtained a valid membase */ + if (!efx->membase) + return; + + efx_fini_channels(efx); + efx_fini_port(efx); + + /* Shutdown the board, then the NIC and board state */ + falcon_fini_interrupt(efx); + + efx_fini_napi(efx); + efx_remove_all(efx); +} + +/* Final NIC shutdown + * This is called only at module unload (or hotplug removal). + */ +static void efx_pci_remove(struct pci_dev *pci_dev) +{ + struct efx_nic *efx; + + efx = pci_get_drvdata(pci_dev); + if (!efx) + return; + + /* Mark the NIC as fini, then stop the interface */ + rtnl_lock(); + efx->state = STATE_FINI; + dev_close(efx->net_dev); + + /* Allow any queued efx_resets() to complete */ + rtnl_unlock(); + + if (efx->membase == NULL) + goto out; + + efx_unregister_netdev(efx); + + /* Wait for any scheduled resets to complete. No more will be + * scheduled from this point because efx_stop_all() has been + * called, we are no longer registered with driverlink, and + * the net_device's have been removed. */ + flush_workqueue(efx->workqueue); + + efx_pci_remove_main(efx); + +out: + efx_fini_io(efx); + EFX_LOG(efx, "shutdown successful\n"); + + pci_set_drvdata(pci_dev, NULL); + efx_fini_struct(efx); + free_netdev(efx->net_dev); +}; + +/* Main body of NIC initialisation + * This is called at module load (or hotplug insertion, theoretically). + */ +static int efx_pci_probe_main(struct efx_nic *efx) +{ + int rc; + + /* Do start-of-day initialisation */ + rc = efx_probe_all(efx); + if (rc) + goto fail1; + + rc = efx_init_napi(efx); + if (rc) + goto fail2; + + /* Initialise the board */ + rc = efx->board_info.init(efx); + if (rc) { + EFX_ERR(efx, "failed to initialise board\n"); + goto fail3; + } + + rc = falcon_init_nic(efx); + if (rc) { + EFX_ERR(efx, "failed to initialise NIC\n"); + goto fail4; + } + + rc = efx_init_port(efx); + if (rc) { + EFX_ERR(efx, "failed to initialise port\n"); + goto fail5; + } + + rc = efx_init_channels(efx); + if (rc) + goto fail6; + + rc = falcon_init_interrupt(efx); + if (rc) + goto fail7; + + return 0; + + fail7: + efx_fini_channels(efx); + fail6: + efx_fini_port(efx); + fail5: + fail4: + fail3: + efx_fini_napi(efx); + fail2: + efx_remove_all(efx); + fail1: + return rc; +} + +/* NIC initialisation + * + * This is called at module load (or hotplug insertion, + * theoretically). It sets up PCI mappings, tests and resets the NIC, + * sets up and registers the network devices with the kernel and hooks + * the interrupt service routine. It does not prepare the device for + * transmission; this is left to the first time one of the network + * interfaces is brought up (i.e. efx_net_open). + */ +static int __devinit efx_pci_probe(struct pci_dev *pci_dev, + const struct pci_device_id *entry) +{ + struct efx_nic_type *type = (struct efx_nic_type *) entry->driver_data; + struct net_device *net_dev; + struct efx_nic *efx; + int i, rc; + + /* Allocate and initialise a struct net_device and struct efx_nic */ + net_dev = alloc_etherdev(sizeof(*efx)); + if (!net_dev) + return -ENOMEM; + net_dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA; + if (lro) + net_dev->features |= NETIF_F_LRO; + efx = net_dev->priv; + pci_set_drvdata(pci_dev, efx); + rc = efx_init_struct(efx, type, pci_dev, net_dev); + if (rc) + goto fail1; + + EFX_INFO(efx, "Solarflare Communications NIC detected\n"); + + /* Set up basic I/O (BAR mappings etc) */ + rc = efx_init_io(efx); + if (rc) + goto fail2; + + /* No serialisation is required with the reset path because + * we're in STATE_INIT. */ + for (i = 0; i < 5; i++) { + rc = efx_pci_probe_main(efx); + if (rc == 0) + break; + + /* Serialise against efx_reset(). No more resets will be + * scheduled since efx_stop_all() has been called, and we + * have not and never have been registered with either + * the rtnetlink or driverlink layers. */ + cancel_work_sync(&efx->reset_work); + + /* Retry if a recoverably reset event has been scheduled */ + if ((efx->reset_pending != RESET_TYPE_INVISIBLE) && + (efx->reset_pending != RESET_TYPE_ALL)) + goto fail3; + + efx->reset_pending = RESET_TYPE_NONE; + } + + if (rc) { + EFX_ERR(efx, "Could not reset NIC\n"); + goto fail4; + } + + /* Switch to the running state before we expose the device to + * the OS. This is to ensure that the initial gathering of + * MAC stats succeeds. */ + rtnl_lock(); + efx->state = STATE_RUNNING; + rtnl_unlock(); + + rc = efx_register_netdev(efx); + if (rc) + goto fail5; + + EFX_LOG(efx, "initialisation successful\n"); + + return 0; + + fail5: + efx_pci_remove_main(efx); + fail4: + fail3: + efx_fini_io(efx); + fail2: + efx_fini_struct(efx); + fail1: + EFX_LOG(efx, "initialisation failed. rc=%d\n", rc); + free_netdev(net_dev); + return rc; +} + +static struct pci_driver efx_pci_driver = { + .name = EFX_DRIVER_NAME, + .id_table = efx_pci_table, + .probe = efx_pci_probe, + .remove = efx_pci_remove, +}; + +/************************************************************************** + * + * Kernel module interface + * + *************************************************************************/ + +module_param(interrupt_mode, uint, 0444); +MODULE_PARM_DESC(interrupt_mode, + "Interrupt mode (0=>MSIX 1=>MSI 2=>legacy)"); + +static int __init efx_init_module(void) +{ + int rc; + + printk(KERN_INFO "Solarflare NET driver v" EFX_DRIVER_VERSION "\n"); + + rc = register_netdevice_notifier(&efx_netdev_notifier); + if (rc) + goto err_notifier; + + refill_workqueue = create_workqueue("sfc_refill"); + if (!refill_workqueue) { + rc = -ENOMEM; + goto err_refill; + } + + rc = pci_register_driver(&efx_pci_driver); + if (rc < 0) + goto err_pci; + + return 0; + + err_pci: + destroy_workqueue(refill_workqueue); + err_refill: + unregister_netdevice_notifier(&efx_netdev_notifier); + err_notifier: + return rc; +} + +static void __exit efx_exit_module(void) +{ + printk(KERN_INFO "Solarflare NET driver unloading\n"); + + pci_unregister_driver(&efx_pci_driver); + destroy_workqueue(refill_workqueue); + unregister_netdevice_notifier(&efx_netdev_notifier); + +} + +module_init(efx_init_module); +module_exit(efx_exit_module); + +MODULE_AUTHOR("Michael Brown <mbrown@fensystems.co.uk> and " + "Solarflare Communications"); +MODULE_DESCRIPTION("Solarflare Communications network driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, efx_pci_table); diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h new file mode 100644 index 000000000000..3b2f69f4a9ab --- /dev/null +++ b/drivers/net/sfc/efx.h @@ -0,0 +1,67 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_EFX_H +#define EFX_EFX_H + +#include "net_driver.h" + +/* PCI IDs */ +#define EFX_VENDID_SFC 0x1924 +#define FALCON_A_P_DEVID 0x0703 +#define FALCON_A_S_DEVID 0x6703 +#define FALCON_B_P_DEVID 0x0710 + +/* TX */ +extern int efx_xmit(struct efx_nic *efx, + struct efx_tx_queue *tx_queue, struct sk_buff *skb); +extern void efx_stop_queue(struct efx_nic *efx); +extern void efx_wake_queue(struct efx_nic *efx); + +/* RX */ +extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index); +extern void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index, + unsigned int len, int checksummed, int discard); +extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay); + +/* Channels */ +extern void efx_process_channel_now(struct efx_channel *channel); +extern int efx_flush_queues(struct efx_nic *efx); + +/* Ports */ +extern void efx_reconfigure_port(struct efx_nic *efx); + +/* Global */ +extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type); +extern void efx_suspend(struct efx_nic *efx); +extern void efx_resume(struct efx_nic *efx); +extern void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs, + int rx_usecs); +extern int efx_request_power(struct efx_nic *efx, int mw, const char *name); +extern void efx_hex_dump(const u8 *, unsigned int, const char *); + +/* Dummy PHY ops for PHY drivers */ +extern int efx_port_dummy_op_int(struct efx_nic *efx); +extern void efx_port_dummy_op_void(struct efx_nic *efx); +extern void efx_port_dummy_op_blink(struct efx_nic *efx, int blink); + + +extern unsigned int efx_monitor_interval; + +static inline void efx_schedule_channel(struct efx_channel *channel) +{ + EFX_TRACE(channel->efx, "channel %d scheduling NAPI poll on CPU%d\n", + channel->channel, raw_smp_processor_id()); + channel->work_pending = 1; + + netif_rx_schedule(channel->napi_dev, &channel->napi_str); +} + +#endif /* EFX_EFX_H */ diff --git a/drivers/net/sfc/enum.h b/drivers/net/sfc/enum.h new file mode 100644 index 000000000000..43663a4619da --- /dev/null +++ b/drivers/net/sfc/enum.h @@ -0,0 +1,50 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2007 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_ENUM_H +#define EFX_ENUM_H + +/*****************************************************************************/ + +/** + * enum reset_type - reset types + * + * %RESET_TYPE_INVSIBLE, %RESET_TYPE_ALL, %RESET_TYPE_WORLD and + * %RESET_TYPE_DISABLE specify the method/scope of the reset. The + * other valuesspecify reasons, which efx_schedule_reset() will choose + * a method for. + * + * @RESET_TYPE_INVISIBLE: don't reset the PHYs or interrupts + * @RESET_TYPE_ALL: reset everything but PCI core blocks + * @RESET_TYPE_WORLD: reset everything, save & restore PCI config + * @RESET_TYPE_DISABLE: disable NIC + * @RESET_TYPE_MONITOR: reset due to hardware monitor + * @RESET_TYPE_INT_ERROR: reset due to internal error + * @RESET_TYPE_RX_RECOVERY: reset to recover from RX datapath errors + * @RESET_TYPE_RX_DESC_FETCH: pcie error during rx descriptor fetch + * @RESET_TYPE_TX_DESC_FETCH: pcie error during tx descriptor fetch + * @RESET_TYPE_TX_SKIP: hardware completed empty tx descriptors + */ +enum reset_type { + RESET_TYPE_NONE = -1, + RESET_TYPE_INVISIBLE = 0, + RESET_TYPE_ALL = 1, + RESET_TYPE_WORLD = 2, + RESET_TYPE_DISABLE = 3, + RESET_TYPE_MAX_METHOD, + RESET_TYPE_MONITOR, + RESET_TYPE_INT_ERROR, + RESET_TYPE_RX_RECOVERY, + RESET_TYPE_RX_DESC_FETCH, + RESET_TYPE_TX_DESC_FETCH, + RESET_TYPE_TX_SKIP, + RESET_TYPE_MAX, +}; + +#endif /* EFX_ENUM_H */ diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c new file mode 100644 index 000000000000..ad541badbd98 --- /dev/null +++ b/drivers/net/sfc/ethtool.c @@ -0,0 +1,460 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/rtnetlink.h> +#include "net_driver.h" +#include "efx.h" +#include "ethtool.h" +#include "falcon.h" +#include "gmii.h" +#include "mac.h" + +static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable); + +struct ethtool_string { + char name[ETH_GSTRING_LEN]; +}; + +struct efx_ethtool_stat { + const char *name; + enum { + EFX_ETHTOOL_STAT_SOURCE_mac_stats, + EFX_ETHTOOL_STAT_SOURCE_nic, + EFX_ETHTOOL_STAT_SOURCE_channel + } source; + unsigned offset; + u64(*get_stat) (void *field); /* Reader function */ +}; + +/* Initialiser for a struct #efx_ethtool_stat with type-checking */ +#define EFX_ETHTOOL_STAT(stat_name, source_name, field, field_type, \ + get_stat_function) { \ + .name = #stat_name, \ + .source = EFX_ETHTOOL_STAT_SOURCE_##source_name, \ + .offset = ((((field_type *) 0) == \ + &((struct efx_##source_name *)0)->field) ? \ + offsetof(struct efx_##source_name, field) : \ + offsetof(struct efx_##source_name, field)), \ + .get_stat = get_stat_function, \ +} + +static u64 efx_get_uint_stat(void *field) +{ + return *(unsigned int *)field; +} + +static u64 efx_get_ulong_stat(void *field) +{ + return *(unsigned long *)field; +} + +static u64 efx_get_u64_stat(void *field) +{ + return *(u64 *) field; +} + +static u64 efx_get_atomic_stat(void *field) +{ + return atomic_read((atomic_t *) field); +} + +#define EFX_ETHTOOL_ULONG_MAC_STAT(field) \ + EFX_ETHTOOL_STAT(field, mac_stats, field, \ + unsigned long, efx_get_ulong_stat) + +#define EFX_ETHTOOL_U64_MAC_STAT(field) \ + EFX_ETHTOOL_STAT(field, mac_stats, field, \ + u64, efx_get_u64_stat) + +#define EFX_ETHTOOL_UINT_NIC_STAT(name) \ + EFX_ETHTOOL_STAT(name, nic, n_##name, \ + unsigned int, efx_get_uint_stat) + +#define EFX_ETHTOOL_ATOMIC_NIC_ERROR_STAT(field) \ + EFX_ETHTOOL_STAT(field, nic, field, \ + atomic_t, efx_get_atomic_stat) + +#define EFX_ETHTOOL_UINT_CHANNEL_STAT(field) \ + EFX_ETHTOOL_STAT(field, channel, n_##field, \ + unsigned int, efx_get_uint_stat) + +static struct efx_ethtool_stat efx_ethtool_stats[] = { + EFX_ETHTOOL_U64_MAC_STAT(tx_bytes), + EFX_ETHTOOL_U64_MAC_STAT(tx_good_bytes), + EFX_ETHTOOL_U64_MAC_STAT(tx_bad_bytes), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_packets), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_bad), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_pause), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_control), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_unicast), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_multicast), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_broadcast), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_lt64), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_64), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_65_to_127), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_128_to_255), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_256_to_511), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_512_to_1023), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_1024_to_15xx), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_15xx_to_jumbo), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_gtjumbo), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_collision), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_single_collision), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_multiple_collision), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_excessive_collision), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_deferred), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_late_collision), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_excessive_deferred), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_non_tcpudp), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_mac_src_error), + EFX_ETHTOOL_ULONG_MAC_STAT(tx_ip_src_error), + EFX_ETHTOOL_U64_MAC_STAT(rx_bytes), + EFX_ETHTOOL_U64_MAC_STAT(rx_good_bytes), + EFX_ETHTOOL_U64_MAC_STAT(rx_bad_bytes), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_packets), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_good), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_pause), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_control), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_unicast), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_multicast), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_broadcast), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_lt64), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_64), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_65_to_127), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_128_to_255), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_256_to_511), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_512_to_1023), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_1024_to_15xx), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_15xx_to_jumbo), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_gtjumbo), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad_lt64), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad_64_to_15xx), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad_15xx_to_jumbo), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad_gtjumbo), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_overflow), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_missed), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_false_carrier), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_symbol_error), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_align_error), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_length_error), + EFX_ETHTOOL_ULONG_MAC_STAT(rx_internal_error), + EFX_ETHTOOL_UINT_NIC_STAT(rx_nodesc_drop_cnt), + EFX_ETHTOOL_ATOMIC_NIC_ERROR_STAT(rx_reset), + EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_tobe_disc), + EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_ip_hdr_chksum_err), + EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_tcp_udp_chksum_err), + EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_frm_trunc), +}; + +/* Number of ethtool statistics */ +#define EFX_ETHTOOL_NUM_STATS ARRAY_SIZE(efx_ethtool_stats) + +/************************************************************************** + * + * Ethtool operations + * + ************************************************************************** + */ + +/* Identify device by flashing LEDs */ +static int efx_ethtool_phys_id(struct net_device *net_dev, u32 seconds) +{ + struct efx_nic *efx = net_dev->priv; + + efx->board_info.blink(efx, 1); + schedule_timeout_interruptible(seconds * HZ); + efx->board_info.blink(efx, 0); + return 0; +} + +/* This must be called with rtnl_lock held. */ +int efx_ethtool_get_settings(struct net_device *net_dev, + struct ethtool_cmd *ecmd) +{ + struct efx_nic *efx = net_dev->priv; + int rc; + + mutex_lock(&efx->mac_lock); + rc = falcon_xmac_get_settings(efx, ecmd); + mutex_unlock(&efx->mac_lock); + + return rc; +} + +/* This must be called with rtnl_lock held. */ +int efx_ethtool_set_settings(struct net_device *net_dev, + struct ethtool_cmd *ecmd) +{ + struct efx_nic *efx = net_dev->priv; + int rc; + + mutex_lock(&efx->mac_lock); + rc = falcon_xmac_set_settings(efx, ecmd); + mutex_unlock(&efx->mac_lock); + if (!rc) + efx_reconfigure_port(efx); + + return rc; +} + +static void efx_ethtool_get_drvinfo(struct net_device *net_dev, + struct ethtool_drvinfo *info) +{ + struct efx_nic *efx = net_dev->priv; + + strlcpy(info->driver, EFX_DRIVER_NAME, sizeof(info->driver)); + strlcpy(info->version, EFX_DRIVER_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(efx->pci_dev), sizeof(info->bus_info)); +} + +static int efx_ethtool_get_stats_count(struct net_device *net_dev) +{ + return EFX_ETHTOOL_NUM_STATS; +} + +static void efx_ethtool_get_strings(struct net_device *net_dev, + u32 string_set, u8 *strings) +{ + struct ethtool_string *ethtool_strings = + (struct ethtool_string *)strings; + int i; + + if (string_set == ETH_SS_STATS) + for (i = 0; i < EFX_ETHTOOL_NUM_STATS; i++) + strncpy(ethtool_strings[i].name, + efx_ethtool_stats[i].name, + sizeof(ethtool_strings[i].name)); +} + +static void efx_ethtool_get_stats(struct net_device *net_dev, + struct ethtool_stats *stats, + u64 *data) +{ + struct efx_nic *efx = net_dev->priv; + struct efx_mac_stats *mac_stats = &efx->mac_stats; + struct efx_ethtool_stat *stat; + struct efx_channel *channel; + int i; + + EFX_BUG_ON_PARANOID(stats->n_stats != EFX_ETHTOOL_NUM_STATS); + + /* Update MAC and NIC statistics */ + net_dev->get_stats(net_dev); + + /* Fill detailed statistics buffer */ + for (i = 0; i < EFX_ETHTOOL_NUM_STATS; i++) { + stat = &efx_ethtool_stats[i]; + switch (stat->source) { + case EFX_ETHTOOL_STAT_SOURCE_mac_stats: + data[i] = stat->get_stat((void *)mac_stats + + stat->offset); + break; + case EFX_ETHTOOL_STAT_SOURCE_nic: + data[i] = stat->get_stat((void *)efx + stat->offset); + break; + case EFX_ETHTOOL_STAT_SOURCE_channel: + data[i] = 0; + efx_for_each_channel(channel, efx) + data[i] += stat->get_stat((void *)channel + + stat->offset); + break; + } + } +} + +static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable) +{ + struct efx_nic *efx = net_dev->priv; + int rc; + + rc = ethtool_op_set_tx_csum(net_dev, enable); + if (rc) + return rc; + + efx_flush_queues(efx); + + return 0; +} + +static int efx_ethtool_set_rx_csum(struct net_device *net_dev, u32 enable) +{ + struct efx_nic *efx = net_dev->priv; + + /* No way to stop the hardware doing the checks; we just + * ignore the result. + */ + efx->rx_checksum_enabled = (enable ? 1 : 0); + + return 0; +} + +static u32 efx_ethtool_get_rx_csum(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + + return efx->rx_checksum_enabled; +} + +/* Restart autonegotiation */ +static int efx_ethtool_nway_reset(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + + return mii_nway_restart(&efx->mii); +} + +static u32 efx_ethtool_get_link(struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + + return efx->link_up; +} + +static int efx_ethtool_get_coalesce(struct net_device *net_dev, + struct ethtool_coalesce *coalesce) +{ + struct efx_nic *efx = net_dev->priv; + struct efx_tx_queue *tx_queue; + struct efx_rx_queue *rx_queue; + struct efx_channel *channel; + + memset(coalesce, 0, sizeof(*coalesce)); + + /* Find lowest IRQ moderation across all used TX queues */ + coalesce->tx_coalesce_usecs_irq = ~((u32) 0); + efx_for_each_tx_queue(tx_queue, efx) { + channel = tx_queue->channel; + if (channel->irq_moderation < coalesce->tx_coalesce_usecs_irq) { + if (channel->used_flags != EFX_USED_BY_RX_TX) + coalesce->tx_coalesce_usecs_irq = + channel->irq_moderation; + else + coalesce->tx_coalesce_usecs_irq = 0; + } + } + + /* Find lowest IRQ moderation across all used RX queues */ + coalesce->rx_coalesce_usecs_irq = ~((u32) 0); + efx_for_each_rx_queue(rx_queue, efx) { + channel = rx_queue->channel; + if (channel->irq_moderation < coalesce->rx_coalesce_usecs_irq) + coalesce->rx_coalesce_usecs_irq = + channel->irq_moderation; + } + + return 0; +} + +/* Set coalescing parameters + * The difficulties occur for shared channels + */ +static int efx_ethtool_set_coalesce(struct net_device *net_dev, + struct ethtool_coalesce *coalesce) +{ + struct efx_nic *efx = net_dev->priv; + struct efx_channel *channel; + struct efx_tx_queue *tx_queue; + unsigned tx_usecs, rx_usecs; + + if (coalesce->use_adaptive_rx_coalesce || + coalesce->use_adaptive_tx_coalesce) + return -EOPNOTSUPP; + + if (coalesce->rx_coalesce_usecs || coalesce->tx_coalesce_usecs) { + EFX_ERR(efx, "invalid coalescing setting. " + "Only rx/tx_coalesce_usecs_irq are supported\n"); + return -EOPNOTSUPP; + } + + rx_usecs = coalesce->rx_coalesce_usecs_irq; + tx_usecs = coalesce->tx_coalesce_usecs_irq; + + /* If the channel is shared only allow RX parameters to be set */ + efx_for_each_tx_queue(tx_queue, efx) { + if ((tx_queue->channel->used_flags == EFX_USED_BY_RX_TX) && + tx_usecs) { + EFX_ERR(efx, "Channel is shared. " + "Only RX coalescing may be set\n"); + return -EOPNOTSUPP; + } + } + + efx_init_irq_moderation(efx, tx_usecs, rx_usecs); + + /* Reset channel to pick up new moderation value. Note that + * this may change the value of the irq_moderation field + * (e.g. to allow for hardware timer granularity). + */ + efx_for_each_channel(channel, efx) + falcon_set_int_moderation(channel); + + return 0; +} + +static int efx_ethtool_set_pauseparam(struct net_device *net_dev, + struct ethtool_pauseparam *pause) +{ + struct efx_nic *efx = net_dev->priv; + enum efx_fc_type flow_control = efx->flow_control; + int rc; + + flow_control &= ~(EFX_FC_RX | EFX_FC_TX | EFX_FC_AUTO); + flow_control |= pause->rx_pause ? EFX_FC_RX : 0; + flow_control |= pause->tx_pause ? EFX_FC_TX : 0; + flow_control |= pause->autoneg ? EFX_FC_AUTO : 0; + + /* Try to push the pause parameters */ + mutex_lock(&efx->mac_lock); + rc = falcon_xmac_set_pause(efx, flow_control); + mutex_unlock(&efx->mac_lock); + + if (!rc) + efx_reconfigure_port(efx); + + return rc; +} + +static void efx_ethtool_get_pauseparam(struct net_device *net_dev, + struct ethtool_pauseparam *pause) +{ + struct efx_nic *efx = net_dev->priv; + + pause->rx_pause = (efx->flow_control & EFX_FC_RX) ? 1 : 0; + pause->tx_pause = (efx->flow_control & EFX_FC_TX) ? 1 : 0; + pause->autoneg = (efx->flow_control & EFX_FC_AUTO) ? 1 : 0; +} + + +struct ethtool_ops efx_ethtool_ops = { + .get_settings = efx_ethtool_get_settings, + .set_settings = efx_ethtool_set_settings, + .get_drvinfo = efx_ethtool_get_drvinfo, + .nway_reset = efx_ethtool_nway_reset, + .get_link = efx_ethtool_get_link, + .get_coalesce = efx_ethtool_get_coalesce, + .set_coalesce = efx_ethtool_set_coalesce, + .get_pauseparam = efx_ethtool_get_pauseparam, + .set_pauseparam = efx_ethtool_set_pauseparam, + .get_rx_csum = efx_ethtool_get_rx_csum, + .set_rx_csum = efx_ethtool_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = efx_ethtool_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_flags = ethtool_op_get_flags, + .set_flags = ethtool_op_set_flags, + .get_strings = efx_ethtool_get_strings, + .phys_id = efx_ethtool_phys_id, + .get_stats_count = efx_ethtool_get_stats_count, + .get_ethtool_stats = efx_ethtool_get_stats, +}; diff --git a/drivers/net/sfc/ethtool.h b/drivers/net/sfc/ethtool.h new file mode 100644 index 000000000000..3628e43df14d --- /dev/null +++ b/drivers/net/sfc/ethtool.h @@ -0,0 +1,27 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005 Fen Systems Ltd. + * Copyright 2006 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_ETHTOOL_H +#define EFX_ETHTOOL_H + +#include "net_driver.h" + +/* + * Ethtool support + */ + +extern int efx_ethtool_get_settings(struct net_device *net_dev, + struct ethtool_cmd *ecmd); +extern int efx_ethtool_set_settings(struct net_device *net_dev, + struct ethtool_cmd *ecmd); + +extern struct ethtool_ops efx_ethtool_ops; + +#endif /* EFX_ETHTOOL_H */ diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c new file mode 100644 index 000000000000..46db549ce580 --- /dev/null +++ b/drivers/net/sfc/falcon.c @@ -0,0 +1,2722 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/module.h> +#include <linux/seq_file.h> +#include "net_driver.h" +#include "bitfield.h" +#include "efx.h" +#include "mac.h" +#include "gmii.h" +#include "spi.h" +#include "falcon.h" +#include "falcon_hwdefs.h" +#include "falcon_io.h" +#include "mdio_10g.h" +#include "phy.h" +#include "boards.h" +#include "workarounds.h" + +/* Falcon hardware control. + * Falcon is the internal codename for the SFC4000 controller that is + * present in SFE400X evaluation boards + */ + +/** + * struct falcon_nic_data - Falcon NIC state + * @next_buffer_table: First available buffer table id + * @pci_dev2: The secondary PCI device if present + */ +struct falcon_nic_data { + unsigned next_buffer_table; + struct pci_dev *pci_dev2; +}; + +/************************************************************************** + * + * Configurable values + * + ************************************************************************** + */ + +static int disable_dma_stats; + +/* This is set to 16 for a good reason. In summary, if larger than + * 16, the descriptor cache holds more than a default socket + * buffer's worth of packets (for UDP we can only have at most one + * socket buffer's worth outstanding). This combined with the fact + * that we only get 1 TX event per descriptor cache means the NIC + * goes idle. + */ +#define TX_DC_ENTRIES 16 +#define TX_DC_ENTRIES_ORDER 0 +#define TX_DC_BASE 0x130000 + +#define RX_DC_ENTRIES 64 +#define RX_DC_ENTRIES_ORDER 2 +#define RX_DC_BASE 0x100000 + +/* RX FIFO XOFF watermark + * + * When the amount of the RX FIFO increases used increases past this + * watermark send XOFF. Only used if RX flow control is enabled (ethtool -A) + * This also has an effect on RX/TX arbitration + */ +static int rx_xoff_thresh_bytes = -1; +module_param(rx_xoff_thresh_bytes, int, 0644); +MODULE_PARM_DESC(rx_xoff_thresh_bytes, "RX fifo XOFF threshold"); + +/* RX FIFO XON watermark + * + * When the amount of the RX FIFO used decreases below this + * watermark send XON. Only used if TX flow control is enabled (ethtool -A) + * This also has an effect on RX/TX arbitration + */ +static int rx_xon_thresh_bytes = -1; +module_param(rx_xon_thresh_bytes, int, 0644); +MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold"); + +/* TX descriptor ring size - min 512 max 4k */ +#define FALCON_TXD_RING_ORDER TX_DESCQ_SIZE_1K +#define FALCON_TXD_RING_SIZE 1024 +#define FALCON_TXD_RING_MASK (FALCON_TXD_RING_SIZE - 1) + +/* RX descriptor ring size - min 512 max 4k */ +#define FALCON_RXD_RING_ORDER RX_DESCQ_SIZE_1K +#define FALCON_RXD_RING_SIZE 1024 +#define FALCON_RXD_RING_MASK (FALCON_RXD_RING_SIZE - 1) + +/* Event queue size - max 32k */ +#define FALCON_EVQ_ORDER EVQ_SIZE_4K +#define FALCON_EVQ_SIZE 4096 +#define FALCON_EVQ_MASK (FALCON_EVQ_SIZE - 1) + +/* Max number of internal errors. After this resets will not be performed */ +#define FALCON_MAX_INT_ERRORS 4 + +/* Maximum period that we wait for flush events. If the flush event + * doesn't arrive in this period of time then we check if the queue + * was disabled anyway. */ +#define FALCON_FLUSH_TIMEOUT 10 /* 10ms */ + +/************************************************************************** + * + * Falcon constants + * + ************************************************************************** + */ + +/* DMA address mask (up to 46-bit, avoiding compiler warnings) + * + * Note that it is possible to have a platform with 64-bit longs and + * 32-bit DMA addresses, or vice versa. EFX_DMA_MASK takes care of the + * platform DMA mask. + */ +#if BITS_PER_LONG == 64 +#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffUL) +#else +#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffULL) +#endif + +/* TX DMA length mask (13-bit) */ +#define FALCON_TX_DMA_MASK (4096 - 1) + +/* Size and alignment of special buffers (4KB) */ +#define FALCON_BUF_SIZE 4096 + +/* Dummy SRAM size code */ +#define SRM_NB_BSZ_ONCHIP_ONLY (-1) + +/* Be nice if these (or equiv.) were in linux/pci_regs.h, but they're not. */ +#define PCI_EXP_DEVCAP_PWR_VAL_LBN 18 +#define PCI_EXP_DEVCAP_PWR_SCL_LBN 26 +#define PCI_EXP_DEVCTL_PAYLOAD_LBN 5 +#define PCI_EXP_LNKSTA_LNK_WID 0x3f0 +#define PCI_EXP_LNKSTA_LNK_WID_LBN 4 + +#define FALCON_IS_DUAL_FUNC(efx) \ + (FALCON_REV(efx) < FALCON_REV_B0) + +/************************************************************************** + * + * Falcon hardware access + * + **************************************************************************/ + +/* Read the current event from the event queue */ +static inline efx_qword_t *falcon_event(struct efx_channel *channel, + unsigned int index) +{ + return (((efx_qword_t *) (channel->eventq.addr)) + index); +} + +/* See if an event is present + * + * We check both the high and low dword of the event for all ones. We + * wrote all ones when we cleared the event, and no valid event can + * have all ones in either its high or low dwords. This approach is + * robust against reordering. + * + * Note that using a single 64-bit comparison is incorrect; even + * though the CPU read will be atomic, the DMA write may not be. + */ +static inline int falcon_event_present(efx_qword_t *event) +{ + return (!(EFX_DWORD_IS_ALL_ONES(event->dword[0]) | + EFX_DWORD_IS_ALL_ONES(event->dword[1]))); +} + +/************************************************************************** + * + * I2C bus - this is a bit-bashing interface using GPIO pins + * Note that it uses the output enables to tristate the outputs + * SDA is the data pin and SCL is the clock + * + ************************************************************************** + */ +static void falcon_setsdascl(struct efx_i2c_interface *i2c) +{ + efx_oword_t reg; + + falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER); + EFX_SET_OWORD_FIELD(reg, GPIO0_OEN, (i2c->scl ? 0 : 1)); + EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, (i2c->sda ? 0 : 1)); + falcon_write(i2c->efx, ®, GPIO_CTL_REG_KER); +} + +static int falcon_getsda(struct efx_i2c_interface *i2c) +{ + efx_oword_t reg; + + falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER); + return EFX_OWORD_FIELD(reg, GPIO3_IN); +} + +static int falcon_getscl(struct efx_i2c_interface *i2c) +{ + efx_oword_t reg; + + falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER); + return EFX_DWORD_FIELD(reg, GPIO0_IN); +} + +static struct efx_i2c_bit_operations falcon_i2c_bit_operations = { + .setsda = falcon_setsdascl, + .setscl = falcon_setsdascl, + .getsda = falcon_getsda, + .getscl = falcon_getscl, + .udelay = 100, + .mdelay = 10, +}; + +/************************************************************************** + * + * Falcon special buffer handling + * Special buffers are used for event queues and the TX and RX + * descriptor rings. + * + *************************************************************************/ + +/* + * Initialise a Falcon special buffer + * + * This will define a buffer (previously allocated via + * falcon_alloc_special_buffer()) in Falcon's buffer table, allowing + * it to be used for event queues, descriptor rings etc. + */ +static int +falcon_init_special_buffer(struct efx_nic *efx, + struct efx_special_buffer *buffer) +{ + efx_qword_t buf_desc; + int index; + dma_addr_t dma_addr; + int i; + + EFX_BUG_ON_PARANOID(!buffer->addr); + + /* Write buffer descriptors to NIC */ + for (i = 0; i < buffer->entries; i++) { + index = buffer->index + i; + dma_addr = buffer->dma_addr + (i * 4096); + EFX_LOG(efx, "mapping special buffer %d at %llx\n", + index, (unsigned long long)dma_addr); + EFX_POPULATE_QWORD_4(buf_desc, + IP_DAT_BUF_SIZE, IP_DAT_BUF_SIZE_4K, + BUF_ADR_REGION, 0, + BUF_ADR_FBUF, (dma_addr >> 12), + BUF_OWNER_ID_FBUF, 0); + falcon_write_sram(efx, &buf_desc, index); + } + + return 0; +} + +/* Unmaps a buffer from Falcon and clears the buffer table entries */ +static void +falcon_fini_special_buffer(struct efx_nic *efx, + struct efx_special_buffer *buffer) +{ + efx_oword_t buf_tbl_upd; + unsigned int start = buffer->index; + unsigned int end = (buffer->index + buffer->entries - 1); + + if (!buffer->entries) + return; + + EFX_LOG(efx, "unmapping special buffers %d-%d\n", + buffer->index, buffer->index + buffer->entries - 1); + + EFX_POPULATE_OWORD_4(buf_tbl_upd, + BUF_UPD_CMD, 0, + BUF_CLR_CMD, 1, + BUF_CLR_END_ID, end, + BUF_CLR_START_ID, start); + falcon_write(efx, &buf_tbl_upd, BUF_TBL_UPD_REG_KER); +} + +/* + * Allocate a new Falcon special buffer + * + * This allocates memory for a new buffer, clears it and allocates a + * new buffer ID range. It does not write into Falcon's buffer table. + * + * This call will allocate 4KB buffers, since Falcon can't use 8KB + * buffers for event queues and descriptor rings. + */ +static int falcon_alloc_special_buffer(struct efx_nic *efx, + struct efx_special_buffer *buffer, + unsigned int len) +{ + struct falcon_nic_data *nic_data = efx->nic_data; + + len = ALIGN(len, FALCON_BUF_SIZE); + + buffer->addr = pci_alloc_consistent(efx->pci_dev, len, + &buffer->dma_addr); + if (!buffer->addr) + return -ENOMEM; + buffer->len = len; + buffer->entries = len / FALCON_BUF_SIZE; + BUG_ON(buffer->dma_addr & (FALCON_BUF_SIZE - 1)); + + /* All zeros is a potentially valid event so memset to 0xff */ + memset(buffer->addr, 0xff, len); + + /* Select new buffer ID */ + buffer->index = nic_data->next_buffer_table; + nic_data->next_buffer_table += buffer->entries; + + EFX_LOG(efx, "allocating special buffers %d-%d at %llx+%x " + "(virt %p phys %lx)\n", buffer->index, + buffer->index + buffer->entries - 1, + (unsigned long long)buffer->dma_addr, len, + buffer->addr, virt_to_phys(buffer->addr)); + + return 0; +} + +static void falcon_free_special_buffer(struct efx_nic *efx, + struct efx_special_buffer *buffer) +{ + if (!buffer->addr) + return; + + EFX_LOG(efx, "deallocating special buffers %d-%d at %llx+%x " + "(virt %p phys %lx)\n", buffer->index, + buffer->index + buffer->entries - 1, + (unsigned long long)buffer->dma_addr, buffer->len, + buffer->addr, virt_to_phys(buffer->addr)); + + pci_free_consistent(efx->pci_dev, buffer->len, buffer->addr, + buffer->dma_addr); + buffer->addr = NULL; + buffer->entries = 0; +} + +/************************************************************************** + * + * Falcon generic buffer handling + * These buffers are used for interrupt status and MAC stats + * + **************************************************************************/ + +static int falcon_alloc_buffer(struct efx_nic *efx, + struct efx_buffer *buffer, unsigned int len) +{ + buffer->addr = pci_alloc_consistent(efx->pci_dev, len, + &buffer->dma_addr); + if (!buffer->addr) + return -ENOMEM; + buffer->len = len; + memset(buffer->addr, 0, len); + return 0; +} + +static void falcon_free_buffer(struct efx_nic *efx, struct efx_buffer *buffer) +{ + if (buffer->addr) { + pci_free_consistent(efx->pci_dev, buffer->len, + buffer->addr, buffer->dma_addr); + buffer->addr = NULL; + } +} + +/************************************************************************** + * + * Falcon TX path + * + **************************************************************************/ + +/* Returns a pointer to the specified transmit descriptor in the TX + * descriptor queue belonging to the specified channel. + */ +static inline efx_qword_t *falcon_tx_desc(struct efx_tx_queue *tx_queue, + unsigned int index) +{ + return (((efx_qword_t *) (tx_queue->txd.addr)) + index); +} + +/* This writes to the TX_DESC_WPTR; write pointer for TX descriptor ring */ +static inline void falcon_notify_tx_desc(struct efx_tx_queue *tx_queue) +{ + unsigned write_ptr; + efx_dword_t reg; + + write_ptr = tx_queue->write_count & FALCON_TXD_RING_MASK; + EFX_POPULATE_DWORD_1(reg, TX_DESC_WPTR_DWORD, write_ptr); + falcon_writel_page(tx_queue->efx, ®, + TX_DESC_UPD_REG_KER_DWORD, tx_queue->queue); +} + + +/* For each entry inserted into the software descriptor ring, create a + * descriptor in the hardware TX descriptor ring (in host memory), and + * write a doorbell. + */ +void falcon_push_buffers(struct efx_tx_queue *tx_queue) +{ + + struct efx_tx_buffer *buffer; + efx_qword_t *txd; + unsigned write_ptr; + + BUG_ON(tx_queue->write_count == tx_queue->insert_count); + + do { + write_ptr = tx_queue->write_count & FALCON_TXD_RING_MASK; + buffer = &tx_queue->buffer[write_ptr]; + txd = falcon_tx_desc(tx_queue, write_ptr); + ++tx_queue->write_count; + + /* Create TX descriptor ring entry */ + EFX_POPULATE_QWORD_5(*txd, + TX_KER_PORT, 0, + TX_KER_CONT, buffer->continuation, + TX_KER_BYTE_CNT, buffer->len, + TX_KER_BUF_REGION, 0, + TX_KER_BUF_ADR, buffer->dma_addr); + } while (tx_queue->write_count != tx_queue->insert_count); + + wmb(); /* Ensure descriptors are written before they are fetched */ + falcon_notify_tx_desc(tx_queue); +} + +/* Allocate hardware resources for a TX queue */ +int falcon_probe_tx(struct efx_tx_queue *tx_queue) +{ + struct efx_nic *efx = tx_queue->efx; + return falcon_alloc_special_buffer(efx, &tx_queue->txd, + FALCON_TXD_RING_SIZE * + sizeof(efx_qword_t)); +} + +int falcon_init_tx(struct efx_tx_queue *tx_queue) +{ + efx_oword_t tx_desc_ptr; + struct efx_nic *efx = tx_queue->efx; + int rc; + + /* Pin TX descriptor ring */ + rc = falcon_init_special_buffer(efx, &tx_queue->txd); + if (rc) + return rc; + + /* Push TX descriptor ring to card */ + EFX_POPULATE_OWORD_10(tx_desc_ptr, + TX_DESCQ_EN, 1, + TX_ISCSI_DDIG_EN, 0, + TX_ISCSI_HDIG_EN, 0, + TX_DESCQ_BUF_BASE_ID, tx_queue->txd.index, + TX_DESCQ_EVQ_ID, tx_queue->channel->evqnum, + TX_DESCQ_OWNER_ID, 0, + TX_DESCQ_LABEL, tx_queue->queue, + TX_DESCQ_SIZE, FALCON_TXD_RING_ORDER, + TX_DESCQ_TYPE, 0, + TX_NON_IP_DROP_DIS_B0, 1); + + if (FALCON_REV(efx) >= FALCON_REV_B0) { + int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM); + EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum); + EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum); + } + + falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base, + tx_queue->queue); + + if (FALCON_REV(efx) < FALCON_REV_B0) { + efx_oword_t reg; + + BUG_ON(tx_queue->queue >= 128); /* HW limit */ + + falcon_read(efx, ®, TX_CHKSM_CFG_REG_KER_A1); + if (efx->net_dev->features & NETIF_F_IP_CSUM) + clear_bit_le(tx_queue->queue, (void *)®); + else + set_bit_le(tx_queue->queue, (void *)®); + falcon_write(efx, ®, TX_CHKSM_CFG_REG_KER_A1); + } + + return 0; +} + +static int falcon_flush_tx_queue(struct efx_tx_queue *tx_queue) +{ + struct efx_nic *efx = tx_queue->efx; + struct efx_channel *channel = &efx->channel[0]; + efx_oword_t tx_flush_descq; + unsigned int read_ptr, i; + + /* Post a flush command */ + EFX_POPULATE_OWORD_2(tx_flush_descq, + TX_FLUSH_DESCQ_CMD, 1, + TX_FLUSH_DESCQ, tx_queue->queue); + falcon_write(efx, &tx_flush_descq, TX_FLUSH_DESCQ_REG_KER); + msleep(FALCON_FLUSH_TIMEOUT); + + if (EFX_WORKAROUND_7803(efx)) + return 0; + + /* Look for a flush completed event */ + read_ptr = channel->eventq_read_ptr; + for (i = 0; i < FALCON_EVQ_SIZE; ++i) { + efx_qword_t *event = falcon_event(channel, read_ptr); + int ev_code, ev_sub_code, ev_queue; + if (!falcon_event_present(event)) + break; + + ev_code = EFX_QWORD_FIELD(*event, EV_CODE); + ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE); + ev_queue = EFX_QWORD_FIELD(*event, DRIVER_EV_TX_DESCQ_ID); + if ((ev_sub_code == TX_DESCQ_FLS_DONE_EV_DECODE) && + (ev_queue == tx_queue->queue)) { + EFX_LOG(efx, "tx queue %d flush command succesful\n", + tx_queue->queue); + return 0; + } + + read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK; + } + + if (EFX_WORKAROUND_11557(efx)) { + efx_oword_t reg; + int enabled; + + falcon_read_table(efx, ®, efx->type->txd_ptr_tbl_base, + tx_queue->queue); + enabled = EFX_OWORD_FIELD(reg, TX_DESCQ_EN); + if (!enabled) { + EFX_LOG(efx, "tx queue %d disabled without a " + "flush event seen\n", tx_queue->queue); + return 0; + } + } + + EFX_ERR(efx, "tx queue %d flush command timed out\n", tx_queue->queue); + return -ETIMEDOUT; +} + +void falcon_fini_tx(struct efx_tx_queue *tx_queue) +{ + struct efx_nic *efx = tx_queue->efx; + efx_oword_t tx_desc_ptr; + + /* Stop the hardware using the queue */ + if (falcon_flush_tx_queue(tx_queue)) + EFX_ERR(efx, "failed to flush tx queue %d\n", tx_queue->queue); + + /* Remove TX descriptor ring from card */ + EFX_ZERO_OWORD(tx_desc_ptr); + falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base, + tx_queue->queue); + + /* Unpin TX descriptor ring */ + falcon_fini_special_buffer(efx, &tx_queue->txd); +} + +/* Free buffers backing TX queue */ +void falcon_remove_tx(struct efx_tx_queue *tx_queue) +{ + falcon_free_special_buffer(tx_queue->efx, &tx_queue->txd); +} + +/************************************************************************** + * + * Falcon RX path + * + **************************************************************************/ + +/* Returns a pointer to the specified descriptor in the RX descriptor queue */ +static inline efx_qword_t *falcon_rx_desc(struct efx_rx_queue *rx_queue, + unsigned int index) +{ + return (((efx_qword_t *) (rx_queue->rxd.addr)) + index); +} + +/* This creates an entry in the RX descriptor queue */ +static inline void falcon_build_rx_desc(struct efx_rx_queue *rx_queue, + unsigned index) +{ + struct efx_rx_buffer *rx_buf; + efx_qword_t *rxd; + + rxd = falcon_rx_desc(rx_queue, index); + rx_buf = efx_rx_buffer(rx_queue, index); + EFX_POPULATE_QWORD_3(*rxd, + RX_KER_BUF_SIZE, + rx_buf->len - + rx_queue->efx->type->rx_buffer_padding, + RX_KER_BUF_REGION, 0, + RX_KER_BUF_ADR, rx_buf->dma_addr); +} + +/* This writes to the RX_DESC_WPTR register for the specified receive + * descriptor ring. + */ +void falcon_notify_rx_desc(struct efx_rx_queue *rx_queue) +{ + efx_dword_t reg; + unsigned write_ptr; + + while (rx_queue->notified_count != rx_queue->added_count) { + falcon_build_rx_desc(rx_queue, + rx_queue->notified_count & + FALCON_RXD_RING_MASK); + ++rx_queue->notified_count; + } + + wmb(); + write_ptr = rx_queue->added_count & FALCON_RXD_RING_MASK; + EFX_POPULATE_DWORD_1(reg, RX_DESC_WPTR_DWORD, write_ptr); + falcon_writel_page(rx_queue->efx, ®, + RX_DESC_UPD_REG_KER_DWORD, rx_queue->queue); +} + +int falcon_probe_rx(struct efx_rx_queue *rx_queue) +{ + struct efx_nic *efx = rx_queue->efx; + return falcon_alloc_special_buffer(efx, &rx_queue->rxd, + FALCON_RXD_RING_SIZE * + sizeof(efx_qword_t)); +} + +int falcon_init_rx(struct efx_rx_queue *rx_queue) +{ + efx_oword_t rx_desc_ptr; + struct efx_nic *efx = rx_queue->efx; + int rc; + int is_b0 = FALCON_REV(efx) >= FALCON_REV_B0; + int iscsi_digest_en = is_b0; + + EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n", + rx_queue->queue, rx_queue->rxd.index, + rx_queue->rxd.index + rx_queue->rxd.entries - 1); + + /* Pin RX descriptor ring */ + rc = falcon_init_special_buffer(efx, &rx_queue->rxd); + if (rc) + return rc; + + /* Push RX descriptor ring to card */ + EFX_POPULATE_OWORD_10(rx_desc_ptr, + RX_ISCSI_DDIG_EN, iscsi_digest_en, + RX_ISCSI_HDIG_EN, iscsi_digest_en, + RX_DESCQ_BUF_BASE_ID, rx_queue->rxd.index, + RX_DESCQ_EVQ_ID, rx_queue->channel->evqnum, + RX_DESCQ_OWNER_ID, 0, + RX_DESCQ_LABEL, rx_queue->queue, + RX_DESCQ_SIZE, FALCON_RXD_RING_ORDER, + RX_DESCQ_TYPE, 0 /* kernel queue */ , + /* For >=B0 this is scatter so disable */ + RX_DESCQ_JUMBO, !is_b0, + RX_DESCQ_EN, 1); + falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base, + rx_queue->queue); + return 0; +} + +static int falcon_flush_rx_queue(struct efx_rx_queue *rx_queue) +{ + struct efx_nic *efx = rx_queue->efx; + struct efx_channel *channel = &efx->channel[0]; + unsigned int read_ptr, i; + efx_oword_t rx_flush_descq; + + /* Post a flush command */ + EFX_POPULATE_OWORD_2(rx_flush_descq, + RX_FLUSH_DESCQ_CMD, 1, + RX_FLUSH_DESCQ, rx_queue->queue); + falcon_write(efx, &rx_flush_descq, RX_FLUSH_DESCQ_REG_KER); + msleep(FALCON_FLUSH_TIMEOUT); + + if (EFX_WORKAROUND_7803(efx)) + return 0; + + /* Look for a flush completed event */ + read_ptr = channel->eventq_read_ptr; + for (i = 0; i < FALCON_EVQ_SIZE; ++i) { + efx_qword_t *event = falcon_event(channel, read_ptr); + int ev_code, ev_sub_code, ev_queue, ev_failed; + if (!falcon_event_present(event)) + break; + + ev_code = EFX_QWORD_FIELD(*event, EV_CODE); + ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE); + ev_queue = EFX_QWORD_FIELD(*event, DRIVER_EV_RX_DESCQ_ID); + ev_failed = EFX_QWORD_FIELD(*event, DRIVER_EV_RX_FLUSH_FAIL); + + if ((ev_sub_code == RX_DESCQ_FLS_DONE_EV_DECODE) && + (ev_queue == rx_queue->queue)) { + if (ev_failed) { + EFX_INFO(efx, "rx queue %d flush command " + "failed\n", rx_queue->queue); + return -EAGAIN; + } else { + EFX_LOG(efx, "rx queue %d flush command " + "succesful\n", rx_queue->queue); + return 0; + } + } + + read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK; + } + + if (EFX_WORKAROUND_11557(efx)) { + efx_oword_t reg; + int enabled; + + falcon_read_table(efx, ®, efx->type->rxd_ptr_tbl_base, + rx_queue->queue); + enabled = EFX_OWORD_FIELD(reg, RX_DESCQ_EN); + if (!enabled) { + EFX_LOG(efx, "rx queue %d disabled without a " + "flush event seen\n", rx_queue->queue); + return 0; + } + } + + EFX_ERR(efx, "rx queue %d flush command timed out\n", rx_queue->queue); + return -ETIMEDOUT; +} + +void falcon_fini_rx(struct efx_rx_queue *rx_queue) +{ + efx_oword_t rx_desc_ptr; + struct efx_nic *efx = rx_queue->efx; + int i, rc; + + /* Try and flush the rx queue. This may need to be repeated */ + for (i = 0; i < 5; i++) { + rc = falcon_flush_rx_queue(rx_queue); + if (rc == -EAGAIN) + continue; + break; + } + if (rc) + EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue); + + /* Remove RX descriptor ring from card */ + EFX_ZERO_OWORD(rx_desc_ptr); + falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base, + rx_queue->queue); + + /* Unpin RX descriptor ring */ + falcon_fini_special_buffer(efx, &rx_queue->rxd); +} + +/* Free buffers backing RX queue */ +void falcon_remove_rx(struct efx_rx_queue *rx_queue) +{ + falcon_free_special_buffer(rx_queue->efx, &rx_queue->rxd); +} + +/************************************************************************** + * + * Falcon event queue processing + * Event queues are processed by per-channel tasklets. + * + **************************************************************************/ + +/* Update a channel's event queue's read pointer (RPTR) register + * + * This writes the EVQ_RPTR_REG register for the specified channel's + * event queue. + * + * Note that EVQ_RPTR_REG contains the index of the "last read" event, + * whereas channel->eventq_read_ptr contains the index of the "next to + * read" event. + */ +void falcon_eventq_read_ack(struct efx_channel *channel) +{ + efx_dword_t reg; + struct efx_nic *efx = channel->efx; + + EFX_POPULATE_DWORD_1(reg, EVQ_RPTR_DWORD, channel->eventq_read_ptr); + falcon_writel_table(efx, ®, efx->type->evq_rptr_tbl_base, + channel->evqnum); +} + +/* Use HW to insert a SW defined event */ +void falcon_generate_event(struct efx_channel *channel, efx_qword_t *event) +{ + efx_oword_t drv_ev_reg; + + EFX_POPULATE_OWORD_2(drv_ev_reg, + DRV_EV_QID, channel->evqnum, + DRV_EV_DATA, + EFX_QWORD_FIELD64(*event, WHOLE_EVENT)); + falcon_write(channel->efx, &drv_ev_reg, DRV_EV_REG_KER); +} + +/* Handle a transmit completion event + * + * Falcon batches TX completion events; the message we receive is of + * the form "complete all TX events up to this index". + */ +static inline void falcon_handle_tx_event(struct efx_channel *channel, + efx_qword_t *event) +{ + unsigned int tx_ev_desc_ptr; + unsigned int tx_ev_q_label; + struct efx_tx_queue *tx_queue; + struct efx_nic *efx = channel->efx; + + if (likely(EFX_QWORD_FIELD(*event, TX_EV_COMP))) { + /* Transmit completion */ + tx_ev_desc_ptr = EFX_QWORD_FIELD(*event, TX_EV_DESC_PTR); + tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL); + tx_queue = &efx->tx_queue[tx_ev_q_label]; + efx_xmit_done(tx_queue, tx_ev_desc_ptr); + } else if (EFX_QWORD_FIELD(*event, TX_EV_WQ_FF_FULL)) { + /* Rewrite the FIFO write pointer */ + tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL); + tx_queue = &efx->tx_queue[tx_ev_q_label]; + + if (NET_DEV_REGISTERED(efx)) + netif_tx_lock(efx->net_dev); + falcon_notify_tx_desc(tx_queue); + if (NET_DEV_REGISTERED(efx)) + netif_tx_unlock(efx->net_dev); + } else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) && + EFX_WORKAROUND_10727(efx)) { + efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH); + } else { + EFX_ERR(efx, "channel %d unexpected TX event " + EFX_QWORD_FMT"\n", channel->channel, + EFX_QWORD_VAL(*event)); + } +} + +/* Check received packet's destination MAC address. */ +static int check_dest_mac(struct efx_rx_queue *rx_queue, + const efx_qword_t *event) +{ + struct efx_rx_buffer *rx_buf; + struct efx_nic *efx = rx_queue->efx; + int rx_ev_desc_ptr; + struct ethhdr *eh; + + if (efx->promiscuous) + return 1; + + rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, RX_EV_DESC_PTR); + rx_buf = efx_rx_buffer(rx_queue, rx_ev_desc_ptr); + eh = (struct ethhdr *)rx_buf->data; + if (memcmp(eh->h_dest, efx->net_dev->dev_addr, ETH_ALEN)) + return 0; + return 1; +} + +/* Detect errors included in the rx_evt_pkt_ok bit. */ +static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, + const efx_qword_t *event, + unsigned *rx_ev_pkt_ok, + int *discard, int byte_count) +{ + struct efx_nic *efx = rx_queue->efx; + unsigned rx_ev_buf_owner_id_err, rx_ev_ip_hdr_chksum_err; + unsigned rx_ev_tcp_udp_chksum_err, rx_ev_eth_crc_err; + unsigned rx_ev_frm_trunc, rx_ev_drib_nib, rx_ev_tobe_disc; + unsigned rx_ev_pkt_type, rx_ev_other_err, rx_ev_pause_frm; + unsigned rx_ev_ip_frag_err, rx_ev_hdr_type, rx_ev_mcast_pkt; + int snap, non_ip; + + rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE); + rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT); + rx_ev_tobe_disc = EFX_QWORD_FIELD(*event, RX_EV_TOBE_DISC); + rx_ev_pkt_type = EFX_QWORD_FIELD(*event, RX_EV_PKT_TYPE); + rx_ev_buf_owner_id_err = EFX_QWORD_FIELD(*event, + RX_EV_BUF_OWNER_ID_ERR); + rx_ev_ip_frag_err = EFX_QWORD_FIELD(*event, RX_EV_IF_FRAG_ERR); + rx_ev_ip_hdr_chksum_err = EFX_QWORD_FIELD(*event, + RX_EV_IP_HDR_CHKSUM_ERR); + rx_ev_tcp_udp_chksum_err = EFX_QWORD_FIELD(*event, + RX_EV_TCP_UDP_CHKSUM_ERR); + rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR); + rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC); + rx_ev_drib_nib = ((FALCON_REV(efx) >= FALCON_REV_B0) ? + 0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB)); + rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR); + + /* Every error apart from tobe_disc and pause_frm */ + rx_ev_other_err = (rx_ev_drib_nib | rx_ev_tcp_udp_chksum_err | + rx_ev_buf_owner_id_err | rx_ev_eth_crc_err | + rx_ev_frm_trunc | rx_ev_ip_hdr_chksum_err); + + snap = (rx_ev_pkt_type == RX_EV_PKT_TYPE_LLC_DECODE) || + (rx_ev_pkt_type == RX_EV_PKT_TYPE_VLAN_LLC_DECODE); + non_ip = (rx_ev_hdr_type == RX_EV_HDR_TYPE_NON_IP_DECODE); + + /* SFC bug 5475/8970: The Falcon XMAC incorrectly calculates the + * length field of an LLC frame, which sets TOBE_DISC. We could set + * PASS_LEN_ERR, but we want the MAC to filter out short frames (to + * protect the RX block). + * + * bug5475 - LLC/SNAP: Falcon identifies SNAP packets. + * bug8970 - LLC/noSNAP: Falcon does not provide an LLC flag. + * LLC can't encapsulate IP, so by definition + * these packets are NON_IP. + * + * Unicast mismatch will also cause TOBE_DISC, so the driver needs + * to check this. + */ + if (EFX_WORKAROUND_5475(efx) && rx_ev_tobe_disc && (snap || non_ip)) { + /* If all the other flags are zero then we can state the + * entire packet is ok, which will flag to the kernel not + * to recalculate checksums. + */ + if (!(non_ip | rx_ev_other_err | rx_ev_pause_frm)) + *rx_ev_pkt_ok = 1; + + rx_ev_tobe_disc = 0; + + /* TOBE_DISC is set for unicast mismatch. But given that + * we can't trust TOBE_DISC here, we must validate the dest + * MAC address ourselves. + */ + if (!rx_ev_mcast_pkt && !check_dest_mac(rx_queue, event)) + rx_ev_tobe_disc = 1; + } + + /* Count errors that are not in MAC stats. */ + if (rx_ev_frm_trunc) + ++rx_queue->channel->n_rx_frm_trunc; + else if (rx_ev_tobe_disc) + ++rx_queue->channel->n_rx_tobe_disc; + else if (rx_ev_ip_hdr_chksum_err) + ++rx_queue->channel->n_rx_ip_hdr_chksum_err; + else if (rx_ev_tcp_udp_chksum_err) + ++rx_queue->channel->n_rx_tcp_udp_chksum_err; + if (rx_ev_ip_frag_err) + ++rx_queue->channel->n_rx_ip_frag_err; + + /* The frame must be discarded if any of these are true. */ + *discard = (rx_ev_eth_crc_err | rx_ev_frm_trunc | rx_ev_drib_nib | + rx_ev_tobe_disc | rx_ev_pause_frm); + + /* TOBE_DISC is expected on unicast mismatches; don't print out an + * error message. FRM_TRUNC indicates RXDP dropped the packet due + * to a FIFO overflow. + */ +#ifdef EFX_ENABLE_DEBUG + if (rx_ev_other_err) { + EFX_INFO_RL(efx, " RX queue %d unexpected RX event " + EFX_QWORD_FMT "%s%s%s%s%s%s%s%s%s\n", + rx_queue->queue, EFX_QWORD_VAL(*event), + rx_ev_buf_owner_id_err ? " [OWNER_ID_ERR]" : "", + rx_ev_ip_hdr_chksum_err ? + " [IP_HDR_CHKSUM_ERR]" : "", + rx_ev_tcp_udp_chksum_err ? + " [TCP_UDP_CHKSUM_ERR]" : "", + rx_ev_eth_crc_err ? " [ETH_CRC_ERR]" : "", + rx_ev_frm_trunc ? " [FRM_TRUNC]" : "", + rx_ev_drib_nib ? " [DRIB_NIB]" : "", + rx_ev_tobe_disc ? " [TOBE_DISC]" : "", + rx_ev_pause_frm ? " [PAUSE]" : "", + snap ? " [SNAP/LLC]" : ""); + } +#endif + + if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) && + efx->phy_type == PHY_TYPE_10XPRESS)) + tenxpress_crc_err(efx); +} + +/* Handle receive events that are not in-order. */ +static void falcon_handle_rx_bad_index(struct efx_rx_queue *rx_queue, + unsigned index) +{ + struct efx_nic *efx = rx_queue->efx; + unsigned expected, dropped; + + expected = rx_queue->removed_count & FALCON_RXD_RING_MASK; + dropped = ((index + FALCON_RXD_RING_SIZE - expected) & + FALCON_RXD_RING_MASK); + EFX_INFO(efx, "dropped %d events (index=%d expected=%d)\n", + dropped, index, expected); + + efx_schedule_reset(efx, EFX_WORKAROUND_5676(efx) ? + RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE); +} + +/* Handle a packet received event + * + * Falcon silicon gives a "discard" flag if it's a unicast packet with the + * wrong destination address + * Also "is multicast" and "matches multicast filter" flags can be used to + * discard non-matching multicast packets. + */ +static inline int falcon_handle_rx_event(struct efx_channel *channel, + const efx_qword_t *event) +{ + unsigned int rx_ev_q_label, rx_ev_desc_ptr, rx_ev_byte_cnt; + unsigned int rx_ev_pkt_ok, rx_ev_hdr_type, rx_ev_mcast_pkt; + unsigned expected_ptr; + int discard = 0, checksummed; + struct efx_rx_queue *rx_queue; + struct efx_nic *efx = channel->efx; + + /* Basic packet information */ + rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, RX_EV_BYTE_CNT); + rx_ev_pkt_ok = EFX_QWORD_FIELD(*event, RX_EV_PKT_OK); + rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE); + WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_JUMBO_CONT)); + WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_SOP) != 1); + + rx_ev_q_label = EFX_QWORD_FIELD(*event, RX_EV_Q_LABEL); + rx_queue = &efx->rx_queue[rx_ev_q_label]; + + rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, RX_EV_DESC_PTR); + expected_ptr = rx_queue->removed_count & FALCON_RXD_RING_MASK; + if (unlikely(rx_ev_desc_ptr != expected_ptr)) { + falcon_handle_rx_bad_index(rx_queue, rx_ev_desc_ptr); + return rx_ev_q_label; + } + + if (likely(rx_ev_pkt_ok)) { + /* If packet is marked as OK and packet type is TCP/IPv4 or + * UDP/IPv4, then we can rely on the hardware checksum. + */ + checksummed = RX_EV_HDR_TYPE_HAS_CHECKSUMS(rx_ev_hdr_type); + } else { + falcon_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok, + &discard, rx_ev_byte_cnt); + checksummed = 0; + } + + /* Detect multicast packets that didn't match the filter */ + rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT); + if (rx_ev_mcast_pkt) { + unsigned int rx_ev_mcast_hash_match = + EFX_QWORD_FIELD(*event, RX_EV_MCAST_HASH_MATCH); + + if (unlikely(!rx_ev_mcast_hash_match)) + discard = 1; + } + + /* Handle received packet */ + efx_rx_packet(rx_queue, rx_ev_desc_ptr, rx_ev_byte_cnt, + checksummed, discard); + + return rx_ev_q_label; +} + +/* Global events are basically PHY events */ +static void falcon_handle_global_event(struct efx_channel *channel, + efx_qword_t *event) +{ + struct efx_nic *efx = channel->efx; + int is_phy_event = 0, handled = 0; + + /* Check for interrupt on either port. Some boards have a + * single PHY wired to the interrupt line for port 1. */ + if (EFX_QWORD_FIELD(*event, G_PHY0_INTR) || + EFX_QWORD_FIELD(*event, G_PHY1_INTR) || + EFX_QWORD_FIELD(*event, XG_PHY_INTR)) + is_phy_event = 1; + + if ((FALCON_REV(efx) >= FALCON_REV_B0) && + EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0)) + is_phy_event = 1; + + if (is_phy_event) { + efx->phy_op->clear_interrupt(efx); + queue_work(efx->workqueue, &efx->reconfigure_work); + handled = 1; + } + + if (EFX_QWORD_FIELD_VER(efx, *event, RX_RECOVERY)) { + EFX_ERR(efx, "channel %d seen global RX_RESET " + "event. Resetting.\n", channel->channel); + + atomic_inc(&efx->rx_reset); + efx_schedule_reset(efx, EFX_WORKAROUND_6555(efx) ? + RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE); + handled = 1; + } + + if (!handled) + EFX_ERR(efx, "channel %d unknown global event " + EFX_QWORD_FMT "\n", channel->channel, + EFX_QWORD_VAL(*event)); +} + +static void falcon_handle_driver_event(struct efx_channel *channel, + efx_qword_t *event) +{ + struct efx_nic *efx = channel->efx; + unsigned int ev_sub_code; + unsigned int ev_sub_data; + + ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE); + ev_sub_data = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_DATA); + + switch (ev_sub_code) { + case TX_DESCQ_FLS_DONE_EV_DECODE: + EFX_TRACE(efx, "channel %d TXQ %d flushed\n", + channel->channel, ev_sub_data); + break; + case RX_DESCQ_FLS_DONE_EV_DECODE: + EFX_TRACE(efx, "channel %d RXQ %d flushed\n", + channel->channel, ev_sub_data); + break; + case EVQ_INIT_DONE_EV_DECODE: + EFX_LOG(efx, "channel %d EVQ %d initialised\n", + channel->channel, ev_sub_data); + break; + case SRM_UPD_DONE_EV_DECODE: + EFX_TRACE(efx, "channel %d SRAM update done\n", + channel->channel); + break; + case WAKE_UP_EV_DECODE: + EFX_TRACE(efx, "channel %d RXQ %d wakeup event\n", + channel->channel, ev_sub_data); + break; + case TIMER_EV_DECODE: + EFX_TRACE(efx, "channel %d RX queue %d timer expired\n", + channel->channel, ev_sub_data); + break; + case RX_RECOVERY_EV_DECODE: + EFX_ERR(efx, "channel %d seen DRIVER RX_RESET event. " + "Resetting.\n", channel->channel); + efx_schedule_reset(efx, + EFX_WORKAROUND_6555(efx) ? + RESET_TYPE_RX_RECOVERY : + RESET_TYPE_DISABLE); + break; + case RX_DSC_ERROR_EV_DECODE: + EFX_ERR(efx, "RX DMA Q %d reports descriptor fetch error." + " RX Q %d is disabled.\n", ev_sub_data, ev_sub_data); + efx_schedule_reset(efx, RESET_TYPE_RX_DESC_FETCH); + break; + case TX_DSC_ERROR_EV_DECODE: + EFX_ERR(efx, "TX DMA Q %d reports descriptor fetch error." + " TX Q %d is disabled.\n", ev_sub_data, ev_sub_data); + efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH); + break; + default: + EFX_TRACE(efx, "channel %d unknown driver event code %d " + "data %04x\n", channel->channel, ev_sub_code, + ev_sub_data); + break; + } +} + +int falcon_process_eventq(struct efx_channel *channel, int *rx_quota) +{ + unsigned int read_ptr; + efx_qword_t event, *p_event; + int ev_code; + int rxq; + int rxdmaqs = 0; + + read_ptr = channel->eventq_read_ptr; + + do { + p_event = falcon_event(channel, read_ptr); + event = *p_event; + + if (!falcon_event_present(&event)) + /* End of events */ + break; + + EFX_TRACE(channel->efx, "channel %d event is "EFX_QWORD_FMT"\n", + channel->channel, EFX_QWORD_VAL(event)); + + /* Clear this event by marking it all ones */ + EFX_SET_QWORD(*p_event); + + ev_code = EFX_QWORD_FIELD(event, EV_CODE); + + switch (ev_code) { + case RX_IP_EV_DECODE: + rxq = falcon_handle_rx_event(channel, &event); + rxdmaqs |= (1 << rxq); + (*rx_quota)--; + break; + case TX_IP_EV_DECODE: + falcon_handle_tx_event(channel, &event); + break; + case DRV_GEN_EV_DECODE: + channel->eventq_magic + = EFX_QWORD_FIELD(event, EVQ_MAGIC); + EFX_LOG(channel->efx, "channel %d received generated " + "event "EFX_QWORD_FMT"\n", channel->channel, + EFX_QWORD_VAL(event)); + break; + case GLOBAL_EV_DECODE: + falcon_handle_global_event(channel, &event); + break; + case DRIVER_EV_DECODE: + falcon_handle_driver_event(channel, &event); + break; + default: + EFX_ERR(channel->efx, "channel %d unknown event type %d" + " (data " EFX_QWORD_FMT ")\n", channel->channel, + ev_code, EFX_QWORD_VAL(event)); + } + + /* Increment read pointer */ + read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK; + + } while (*rx_quota); + + channel->eventq_read_ptr = read_ptr; + return rxdmaqs; +} + +void falcon_set_int_moderation(struct efx_channel *channel) +{ + efx_dword_t timer_cmd; + struct efx_nic *efx = channel->efx; + + /* Set timer register */ + if (channel->irq_moderation) { + /* Round to resolution supported by hardware. The value we + * program is based at 0. So actual interrupt moderation + * achieved is ((x + 1) * res). + */ + unsigned int res = 5; + channel->irq_moderation -= (channel->irq_moderation % res); + if (channel->irq_moderation < res) + channel->irq_moderation = res; + EFX_POPULATE_DWORD_2(timer_cmd, + TIMER_MODE, TIMER_MODE_INT_HLDOFF, + TIMER_VAL, + (channel->irq_moderation / res) - 1); + } else { + EFX_POPULATE_DWORD_2(timer_cmd, + TIMER_MODE, TIMER_MODE_DIS, + TIMER_VAL, 0); + } + falcon_writel_page_locked(efx, &timer_cmd, TIMER_CMD_REG_KER, + channel->evqnum); + +} + +/* Allocate buffer table entries for event queue */ +int falcon_probe_eventq(struct efx_channel *channel) +{ + struct efx_nic *efx = channel->efx; + unsigned int evq_size; + + evq_size = FALCON_EVQ_SIZE * sizeof(efx_qword_t); + return falcon_alloc_special_buffer(efx, &channel->eventq, evq_size); +} + +int falcon_init_eventq(struct efx_channel *channel) +{ + efx_oword_t evq_ptr; + struct efx_nic *efx = channel->efx; + int rc; + + EFX_LOG(efx, "channel %d event queue in special buffers %d-%d\n", + channel->channel, channel->eventq.index, + channel->eventq.index + channel->eventq.entries - 1); + + /* Pin event queue buffer */ + rc = falcon_init_special_buffer(efx, &channel->eventq); + if (rc) + return rc; + + /* Fill event queue with all ones (i.e. empty events) */ + memset(channel->eventq.addr, 0xff, channel->eventq.len); + + /* Push event queue to card */ + EFX_POPULATE_OWORD_3(evq_ptr, + EVQ_EN, 1, + EVQ_SIZE, FALCON_EVQ_ORDER, + EVQ_BUF_BASE_ID, channel->eventq.index); + falcon_write_table(efx, &evq_ptr, efx->type->evq_ptr_tbl_base, + channel->evqnum); + + falcon_set_int_moderation(channel); + + return 0; +} + +void falcon_fini_eventq(struct efx_channel *channel) +{ + efx_oword_t eventq_ptr; + struct efx_nic *efx = channel->efx; + + /* Remove event queue from card */ + EFX_ZERO_OWORD(eventq_ptr); + falcon_write_table(efx, &eventq_ptr, efx->type->evq_ptr_tbl_base, + channel->evqnum); + + /* Unpin event queue */ + falcon_fini_special_buffer(efx, &channel->eventq); +} + +/* Free buffers backing event queue */ +void falcon_remove_eventq(struct efx_channel *channel) +{ + falcon_free_special_buffer(channel->efx, &channel->eventq); +} + + +/* Generates a test event on the event queue. A subsequent call to + * process_eventq() should pick up the event and place the value of + * "magic" into channel->eventq_magic; + */ +void falcon_generate_test_event(struct efx_channel *channel, unsigned int magic) +{ + efx_qword_t test_event; + + EFX_POPULATE_QWORD_2(test_event, + EV_CODE, DRV_GEN_EV_DECODE, + EVQ_MAGIC, magic); + falcon_generate_event(channel, &test_event); +} + + +/************************************************************************** + * + * Falcon hardware interrupts + * The hardware interrupt handler does very little work; all the event + * queue processing is carried out by per-channel tasklets. + * + **************************************************************************/ + +/* Enable/disable/generate Falcon interrupts */ +static inline void falcon_interrupts(struct efx_nic *efx, int enabled, + int force) +{ + efx_oword_t int_en_reg_ker; + + EFX_POPULATE_OWORD_2(int_en_reg_ker, + KER_INT_KER, force, + DRV_INT_EN_KER, enabled); + falcon_write(efx, &int_en_reg_ker, INT_EN_REG_KER); +} + +void falcon_enable_interrupts(struct efx_nic *efx) +{ + efx_oword_t int_adr_reg_ker; + struct efx_channel *channel; + + EFX_ZERO_OWORD(*((efx_oword_t *) efx->irq_status.addr)); + wmb(); /* Ensure interrupt vector is clear before interrupts enabled */ + + /* Program address */ + EFX_POPULATE_OWORD_2(int_adr_reg_ker, + NORM_INT_VEC_DIS_KER, EFX_INT_MODE_USE_MSI(efx), + INT_ADR_KER, efx->irq_status.dma_addr); + falcon_write(efx, &int_adr_reg_ker, INT_ADR_REG_KER); + + /* Enable interrupts */ + falcon_interrupts(efx, 1, 0); + + /* Force processing of all the channels to get the EVQ RPTRs up to + date */ + efx_for_each_channel_with_interrupt(channel, efx) + efx_schedule_channel(channel); +} + +void falcon_disable_interrupts(struct efx_nic *efx) +{ + /* Disable interrupts */ + falcon_interrupts(efx, 0, 0); +} + +/* Generate a Falcon test interrupt + * Interrupt must already have been enabled, otherwise nasty things + * may happen. + */ +void falcon_generate_interrupt(struct efx_nic *efx) +{ + falcon_interrupts(efx, 1, 1); +} + +/* Acknowledge a legacy interrupt from Falcon + * + * This acknowledges a legacy (not MSI) interrupt via INT_ACK_KER_REG. + * + * Due to SFC bug 3706 (silicon revision <=A1) reads can be duplicated in the + * BIU. Interrupt acknowledge is read sensitive so must write instead + * (then read to ensure the BIU collector is flushed) + * + * NB most hardware supports MSI interrupts + */ +static inline void falcon_irq_ack_a1(struct efx_nic *efx) +{ + efx_dword_t reg; + + EFX_POPULATE_DWORD_1(reg, INT_ACK_DUMMY_DATA, 0xb7eb7e); + falcon_writel(efx, ®, INT_ACK_REG_KER_A1); + falcon_readl(efx, ®, WORK_AROUND_BROKEN_PCI_READS_REG_KER_A1); +} + +/* Process a fatal interrupt + * Disable bus mastering ASAP and schedule a reset + */ +static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx) +{ + struct falcon_nic_data *nic_data = efx->nic_data; + efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + efx_oword_t fatal_intr; + int error, mem_perr; + static int n_int_errors; + + falcon_read(efx, &fatal_intr, FATAL_INTR_REG_KER); + error = EFX_OWORD_FIELD(fatal_intr, INT_KER_ERROR); + + EFX_ERR(efx, "SYSTEM ERROR " EFX_OWORD_FMT " status " + EFX_OWORD_FMT ": %s\n", EFX_OWORD_VAL(*int_ker), + EFX_OWORD_VAL(fatal_intr), + error ? "disabling bus mastering" : "no recognised error"); + if (error == 0) + goto out; + + /* If this is a memory parity error dump which blocks are offending */ + mem_perr = EFX_OWORD_FIELD(fatal_intr, MEM_PERR_INT_KER); + if (mem_perr) { + efx_oword_t reg; + falcon_read(efx, ®, MEM_STAT_REG_KER); + EFX_ERR(efx, "SYSTEM ERROR: memory parity error " + EFX_OWORD_FMT "\n", EFX_OWORD_VAL(reg)); + } + + /* Disable DMA bus mastering on both devices */ + pci_disable_device(efx->pci_dev); + if (FALCON_IS_DUAL_FUNC(efx)) + pci_disable_device(nic_data->pci_dev2); + + if (++n_int_errors < FALCON_MAX_INT_ERRORS) { + EFX_ERR(efx, "SYSTEM ERROR - reset scheduled\n"); + efx_schedule_reset(efx, RESET_TYPE_INT_ERROR); + } else { + EFX_ERR(efx, "SYSTEM ERROR - max number of errors seen." + "NIC will be disabled\n"); + efx_schedule_reset(efx, RESET_TYPE_DISABLE); + } +out: + return IRQ_HANDLED; +} + +/* Handle a legacy interrupt from Falcon + * Acknowledges the interrupt and schedule event queue processing. + */ +static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id) +{ + struct efx_nic *efx = (struct efx_nic *)dev_id; + efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + struct efx_channel *channel; + efx_dword_t reg; + u32 queues; + int syserr; + + /* Read the ISR which also ACKs the interrupts */ + falcon_readl(efx, ®, INT_ISR0_B0); + queues = EFX_EXTRACT_DWORD(reg, 0, 31); + + /* Check to see if we have a serious error condition */ + syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT); + if (unlikely(syserr)) + return falcon_fatal_interrupt(efx); + + if (queues == 0) + return IRQ_NONE; + + efx->last_irq_cpu = raw_smp_processor_id(); + EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_DWORD_FMT "\n", + irq, raw_smp_processor_id(), EFX_DWORD_VAL(reg)); + + /* Schedule processing of any interrupting queues */ + channel = &efx->channel[0]; + while (queues) { + if (queues & 0x01) + efx_schedule_channel(channel); + channel++; + queues >>= 1; + } + + return IRQ_HANDLED; +} + + +static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) +{ + struct efx_nic *efx = (struct efx_nic *)dev_id; + efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + struct efx_channel *channel; + int syserr; + int queues; + + /* Check to see if this is our interrupt. If it isn't, we + * exit without having touched the hardware. + */ + if (unlikely(EFX_OWORD_IS_ZERO(*int_ker))) { + EFX_TRACE(efx, "IRQ %d on CPU %d not for me\n", irq, + raw_smp_processor_id()); + return IRQ_NONE; + } + efx->last_irq_cpu = raw_smp_processor_id(); + EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n", + irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker)); + + /* Check to see if we have a serious error condition */ + syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT); + if (unlikely(syserr)) + return falcon_fatal_interrupt(efx); + + /* Determine interrupting queues, clear interrupt status + * register and acknowledge the device interrupt. + */ + BUILD_BUG_ON(INT_EVQS_WIDTH > EFX_MAX_CHANNELS); + queues = EFX_OWORD_FIELD(*int_ker, INT_EVQS); + EFX_ZERO_OWORD(*int_ker); + wmb(); /* Ensure the vector is cleared before interrupt ack */ + falcon_irq_ack_a1(efx); + + /* Schedule processing of any interrupting queues */ + channel = &efx->channel[0]; + while (queues) { + if (queues & 0x01) + efx_schedule_channel(channel); + channel++; + queues >>= 1; + } + + return IRQ_HANDLED; +} + +/* Handle an MSI interrupt from Falcon + * + * Handle an MSI hardware interrupt. This routine schedules event + * queue processing. No interrupt acknowledgement cycle is necessary. + * Also, we never need to check that the interrupt is for us, since + * MSI interrupts cannot be shared. + */ +static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id) +{ + struct efx_channel *channel = (struct efx_channel *)dev_id; + struct efx_nic *efx = channel->efx; + efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + int syserr; + + efx->last_irq_cpu = raw_smp_processor_id(); + EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n", + irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker)); + + /* Check to see if we have a serious error condition */ + syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT); + if (unlikely(syserr)) + return falcon_fatal_interrupt(efx); + + /* Schedule processing of the channel */ + efx_schedule_channel(channel); + + return IRQ_HANDLED; +} + + +/* Setup RSS indirection table. + * This maps from the hash value of the packet to RXQ + */ +static void falcon_setup_rss_indir_table(struct efx_nic *efx) +{ + int i = 0; + unsigned long offset; + efx_dword_t dword; + + if (FALCON_REV(efx) < FALCON_REV_B0) + return; + + for (offset = RX_RSS_INDIR_TBL_B0; + offset < RX_RSS_INDIR_TBL_B0 + 0x800; + offset += 0x10) { + EFX_POPULATE_DWORD_1(dword, RX_RSS_INDIR_ENT_B0, + i % efx->rss_queues); + falcon_writel(efx, &dword, offset); + i++; + } +} + +/* Hook interrupt handler(s) + * Try MSI and then legacy interrupts. + */ +int falcon_init_interrupt(struct efx_nic *efx) +{ + struct efx_channel *channel; + int rc; + + if (!EFX_INT_MODE_USE_MSI(efx)) { + irq_handler_t handler; + if (FALCON_REV(efx) >= FALCON_REV_B0) + handler = falcon_legacy_interrupt_b0; + else + handler = falcon_legacy_interrupt_a1; + + rc = request_irq(efx->legacy_irq, handler, IRQF_SHARED, + efx->name, efx); + if (rc) { + EFX_ERR(efx, "failed to hook legacy IRQ %d\n", + efx->pci_dev->irq); + goto fail1; + } + return 0; + } + + /* Hook MSI or MSI-X interrupt */ + efx_for_each_channel_with_interrupt(channel, efx) { + rc = request_irq(channel->irq, falcon_msi_interrupt, + IRQF_PROBE_SHARED, /* Not shared */ + efx->name, channel); + if (rc) { + EFX_ERR(efx, "failed to hook IRQ %d\n", channel->irq); + goto fail2; + } + } + + return 0; + + fail2: + efx_for_each_channel_with_interrupt(channel, efx) + free_irq(channel->irq, channel); + fail1: + return rc; +} + +void falcon_fini_interrupt(struct efx_nic *efx) +{ + struct efx_channel *channel; + efx_oword_t reg; + + /* Disable MSI/MSI-X interrupts */ + efx_for_each_channel_with_interrupt(channel, efx) + if (channel->irq) + free_irq(channel->irq, channel); + + /* ACK legacy interrupt */ + if (FALCON_REV(efx) >= FALCON_REV_B0) + falcon_read(efx, ®, INT_ISR0_B0); + else + falcon_irq_ack_a1(efx); + + /* Disable legacy interrupt */ + if (efx->legacy_irq) + free_irq(efx->legacy_irq, efx); +} + +/************************************************************************** + * + * EEPROM/flash + * + ************************************************************************** + */ + +#define FALCON_SPI_MAX_LEN sizeof(efx_oword_t) + +/* Wait for SPI command completion */ +static int falcon_spi_wait(struct efx_nic *efx) +{ + efx_oword_t reg; + int cmd_en, timer_active; + int count; + + count = 0; + do { + falcon_read(efx, ®, EE_SPI_HCMD_REG_KER); + cmd_en = EFX_OWORD_FIELD(reg, EE_SPI_HCMD_CMD_EN); + timer_active = EFX_OWORD_FIELD(reg, EE_WR_TIMER_ACTIVE); + if (!cmd_en && !timer_active) + return 0; + udelay(10); + } while (++count < 10000); /* wait upto 100msec */ + EFX_ERR(efx, "timed out waiting for SPI\n"); + return -ETIMEDOUT; +} + +static int +falcon_spi_read(struct efx_nic *efx, int device_id, unsigned int command, + unsigned int address, unsigned int addr_len, + void *data, unsigned int len) +{ + efx_oword_t reg; + int rc; + + BUG_ON(len > FALCON_SPI_MAX_LEN); + + /* Check SPI not currently being accessed */ + rc = falcon_spi_wait(efx); + if (rc) + return rc; + + /* Program address register */ + EFX_POPULATE_OWORD_1(reg, EE_SPI_HADR_ADR, address); + falcon_write(efx, ®, EE_SPI_HADR_REG_KER); + + /* Issue read command */ + EFX_POPULATE_OWORD_7(reg, + EE_SPI_HCMD_CMD_EN, 1, + EE_SPI_HCMD_SF_SEL, device_id, + EE_SPI_HCMD_DABCNT, len, + EE_SPI_HCMD_READ, EE_SPI_READ, + EE_SPI_HCMD_DUBCNT, 0, + EE_SPI_HCMD_ADBCNT, addr_len, + EE_SPI_HCMD_ENC, command); + falcon_write(efx, ®, EE_SPI_HCMD_REG_KER); + + /* Wait for read to complete */ + rc = falcon_spi_wait(efx); + if (rc) + return rc; + + /* Read data */ + falcon_read(efx, ®, EE_SPI_HDATA_REG_KER); + memcpy(data, ®, len); + return 0; +} + +/************************************************************************** + * + * MAC wrapper + * + ************************************************************************** + */ +void falcon_drain_tx_fifo(struct efx_nic *efx) +{ + efx_oword_t temp; + int count; + + if (FALCON_REV(efx) < FALCON_REV_B0) + return; + + falcon_read(efx, &temp, MAC0_CTRL_REG_KER); + /* There is no point in draining more than once */ + if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0)) + return; + + /* MAC stats will fail whilst the TX fifo is draining. Serialise + * the drain sequence with the statistics fetch */ + spin_lock(&efx->stats_lock); + + EFX_SET_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0, 1); + falcon_write(efx, &temp, MAC0_CTRL_REG_KER); + + /* Reset the MAC and EM block. */ + falcon_read(efx, &temp, GLB_CTL_REG_KER); + EFX_SET_OWORD_FIELD(temp, RST_XGTX, 1); + EFX_SET_OWORD_FIELD(temp, RST_XGRX, 1); + EFX_SET_OWORD_FIELD(temp, RST_EM, 1); + falcon_write(efx, &temp, GLB_CTL_REG_KER); + + count = 0; + while (1) { + falcon_read(efx, &temp, GLB_CTL_REG_KER); + if (!EFX_OWORD_FIELD(temp, RST_XGTX) && + !EFX_OWORD_FIELD(temp, RST_XGRX) && + !EFX_OWORD_FIELD(temp, RST_EM)) { + EFX_LOG(efx, "Completed MAC reset after %d loops\n", + count); + break; + } + if (count > 20) { + EFX_ERR(efx, "MAC reset failed\n"); + break; + } + count++; + udelay(10); + } + + spin_unlock(&efx->stats_lock); + + /* If we've reset the EM block and the link is up, then + * we'll have to kick the XAUI link so the PHY can recover */ + if (efx->link_up && EFX_WORKAROUND_5147(efx)) + falcon_reset_xaui(efx); +} + +void falcon_deconfigure_mac_wrapper(struct efx_nic *efx) +{ + efx_oword_t temp; + + if (FALCON_REV(efx) < FALCON_REV_B0) + return; + + /* Isolate the MAC -> RX */ + falcon_read(efx, &temp, RX_CFG_REG_KER); + EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 0); + falcon_write(efx, &temp, RX_CFG_REG_KER); + + if (!efx->link_up) + falcon_drain_tx_fifo(efx); +} + +void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) +{ + efx_oword_t reg; + int link_speed; + unsigned int tx_fc; + + if (efx->link_options & GM_LPA_10000) + link_speed = 0x3; + else if (efx->link_options & GM_LPA_1000) + link_speed = 0x2; + else if (efx->link_options & GM_LPA_100) + link_speed = 0x1; + else + link_speed = 0x0; + /* MAC_LINK_STATUS controls MAC backpressure but doesn't work + * as advertised. Disable to ensure packets are not + * indefinitely held and TX queue can be flushed at any point + * while the link is down. */ + EFX_POPULATE_OWORD_5(reg, + MAC_XOFF_VAL, 0xffff /* max pause time */, + MAC_BCAD_ACPT, 1, + MAC_UC_PROM, efx->promiscuous, + MAC_LINK_STATUS, 1, /* always set */ + MAC_SPEED, link_speed); + /* On B0, MAC backpressure can be disabled and packets get + * discarded. */ + if (FALCON_REV(efx) >= FALCON_REV_B0) { + EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, + !efx->link_up); + } + + falcon_write(efx, ®, MAC0_CTRL_REG_KER); + + /* Restore the multicast hash registers. */ + falcon_set_multicast_hash(efx); + + /* Transmission of pause frames when RX crosses the threshold is + * covered by RX_XOFF_MAC_EN and XM_TX_CFG_REG:XM_FCNTL. + * Action on receipt of pause frames is controller by XM_DIS_FCNTL */ + tx_fc = (efx->flow_control & EFX_FC_TX) ? 1 : 0; + falcon_read(efx, ®, RX_CFG_REG_KER); + EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc); + + /* Unisolate the MAC -> RX */ + if (FALCON_REV(efx) >= FALCON_REV_B0) + EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1); + falcon_write(efx, ®, RX_CFG_REG_KER); +} + +int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset) +{ + efx_oword_t reg; + u32 *dma_done; + int i; + + if (disable_dma_stats) + return 0; + + /* Statistics fetch will fail if the MAC is in TX drain */ + if (FALCON_REV(efx) >= FALCON_REV_B0) { + efx_oword_t temp; + falcon_read(efx, &temp, MAC0_CTRL_REG_KER); + if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0)) + return 0; + } + + dma_done = (efx->stats_buffer.addr + done_offset); + *dma_done = FALCON_STATS_NOT_DONE; + wmb(); /* ensure done flag is clear */ + + /* Initiate DMA transfer of stats */ + EFX_POPULATE_OWORD_2(reg, + MAC_STAT_DMA_CMD, 1, + MAC_STAT_DMA_ADR, + efx->stats_buffer.dma_addr); + falcon_write(efx, ®, MAC0_STAT_DMA_REG_KER); + + /* Wait for transfer to complete */ + for (i = 0; i < 400; i++) { + if (*(volatile u32 *)dma_done == FALCON_STATS_DONE) + return 0; + udelay(10); + } + + EFX_ERR(efx, "timed out waiting for statistics\n"); + return -ETIMEDOUT; +} + +/************************************************************************** + * + * PHY access via GMII + * + ************************************************************************** + */ + +/* Use the top bit of the MII PHY id to indicate the PHY type + * (1G/10G), with the remaining bits as the actual PHY id. + * + * This allows us to avoid leaking information from the mii_if_info + * structure into other data structures. + */ +#define FALCON_PHY_ID_ID_WIDTH EFX_WIDTH(MD_PRT_DEV_ADR) +#define FALCON_PHY_ID_ID_MASK ((1 << FALCON_PHY_ID_ID_WIDTH) - 1) +#define FALCON_PHY_ID_WIDTH (FALCON_PHY_ID_ID_WIDTH + 1) +#define FALCON_PHY_ID_MASK ((1 << FALCON_PHY_ID_WIDTH) - 1) +#define FALCON_PHY_ID_10G (1 << (FALCON_PHY_ID_WIDTH - 1)) + + +/* Packing the clause 45 port and device fields into a single value */ +#define MD_PRT_ADR_COMP_LBN (MD_PRT_ADR_LBN - MD_DEV_ADR_LBN) +#define MD_PRT_ADR_COMP_WIDTH MD_PRT_ADR_WIDTH +#define MD_DEV_ADR_COMP_LBN 0 +#define MD_DEV_ADR_COMP_WIDTH MD_DEV_ADR_WIDTH + + +/* Wait for GMII access to complete */ +static int falcon_gmii_wait(struct efx_nic *efx) +{ + efx_dword_t md_stat; + int count; + + for (count = 0; count < 1000; count++) { /* wait upto 10ms */ + falcon_readl(efx, &md_stat, MD_STAT_REG_KER); + if (EFX_DWORD_FIELD(md_stat, MD_BSY) == 0) { + if (EFX_DWORD_FIELD(md_stat, MD_LNFL) != 0 || + EFX_DWORD_FIELD(md_stat, MD_BSERR) != 0) { + EFX_ERR(efx, "error from GMII access " + EFX_DWORD_FMT"\n", + EFX_DWORD_VAL(md_stat)); + return -EIO; + } + return 0; + } + udelay(10); + } + EFX_ERR(efx, "timed out waiting for GMII\n"); + return -ETIMEDOUT; +} + +/* Writes a GMII register of a PHY connected to Falcon using MDIO. */ +static void falcon_mdio_write(struct net_device *net_dev, int phy_id, + int addr, int value) +{ + struct efx_nic *efx = (struct efx_nic *)net_dev->priv; + unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK; + efx_oword_t reg; + + /* The 'generic' prt/dev packing in mdio_10g.h is conveniently + * chosen so that the only current user, Falcon, can take the + * packed value and use them directly. + * Fail to build if this assumption is broken. + */ + BUILD_BUG_ON(FALCON_PHY_ID_10G != MDIO45_XPRT_ID_IS10G); + BUILD_BUG_ON(FALCON_PHY_ID_ID_WIDTH != MDIO45_PRT_DEV_WIDTH); + BUILD_BUG_ON(MD_PRT_ADR_COMP_LBN != MDIO45_PRT_ID_COMP_LBN); + BUILD_BUG_ON(MD_DEV_ADR_COMP_LBN != MDIO45_DEV_ID_COMP_LBN); + + if (phy_id2 == PHY_ADDR_INVALID) + return; + + /* See falcon_mdio_read for an explanation. */ + if (!(phy_id & FALCON_PHY_ID_10G)) { + int mmd = ffs(efx->phy_op->mmds) - 1; + EFX_TRACE(efx, "Fixing erroneous clause22 write\n"); + phy_id2 = mdio_clause45_pack(phy_id2, mmd) + & FALCON_PHY_ID_ID_MASK; + } + + EFX_REGDUMP(efx, "writing GMII %d register %02x with %04x\n", phy_id, + addr, value); + + spin_lock_bh(&efx->phy_lock); + + /* Check MII not currently being accessed */ + if (falcon_gmii_wait(efx) != 0) + goto out; + + /* Write the address/ID register */ + EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr); + falcon_write(efx, ®, MD_PHY_ADR_REG_KER); + + EFX_POPULATE_OWORD_1(reg, MD_PRT_DEV_ADR, phy_id2); + falcon_write(efx, ®, MD_ID_REG_KER); + + /* Write data */ + EFX_POPULATE_OWORD_1(reg, MD_TXD, value); + falcon_write(efx, ®, MD_TXD_REG_KER); + + EFX_POPULATE_OWORD_2(reg, + MD_WRC, 1, + MD_GC, 0); + falcon_write(efx, ®, MD_CS_REG_KER); + + /* Wait for data to be written */ + if (falcon_gmii_wait(efx) != 0) { + /* Abort the write operation */ + EFX_POPULATE_OWORD_2(reg, + MD_WRC, 0, + MD_GC, 1); + falcon_write(efx, ®, MD_CS_REG_KER); + udelay(10); + } + + out: + spin_unlock_bh(&efx->phy_lock); +} + +/* Reads a GMII register from a PHY connected to Falcon. If no value + * could be read, -1 will be returned. */ +static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr) +{ + struct efx_nic *efx = (struct efx_nic *)net_dev->priv; + unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK; + efx_oword_t reg; + int value = -1; + + if (phy_addr == PHY_ADDR_INVALID) + return -1; + + /* Our PHY code knows whether it needs to talk clause 22(1G) or 45(10G) + * but the generic Linux code does not make any distinction or have + * any state for this. + * We spot the case where someone tried to talk 22 to a 45 PHY and + * redirect the request to the lowest numbered MMD as a clause45 + * request. This is enough to allow simple queries like id and link + * state to succeed. TODO: We may need to do more in future. + */ + if (!(phy_id & FALCON_PHY_ID_10G)) { + int mmd = ffs(efx->phy_op->mmds) - 1; + EFX_TRACE(efx, "Fixing erroneous clause22 read\n"); + phy_addr = mdio_clause45_pack(phy_addr, mmd) + & FALCON_PHY_ID_ID_MASK; + } + + spin_lock_bh(&efx->phy_lock); + + /* Check MII not currently being accessed */ + if (falcon_gmii_wait(efx) != 0) + goto out; + + EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr); + falcon_write(efx, ®, MD_PHY_ADR_REG_KER); + + EFX_POPULATE_OWORD_1(reg, MD_PRT_DEV_ADR, phy_addr); + falcon_write(efx, ®, MD_ID_REG_KER); + + /* Request data to be read */ + EFX_POPULATE_OWORD_2(reg, MD_RDC, 1, MD_GC, 0); + falcon_write(efx, ®, MD_CS_REG_KER); + + /* Wait for data to become available */ + value = falcon_gmii_wait(efx); + if (value == 0) { + falcon_read(efx, ®, MD_RXD_REG_KER); + value = EFX_OWORD_FIELD(reg, MD_RXD); + EFX_REGDUMP(efx, "read from GMII %d register %02x, got %04x\n", + phy_id, addr, value); + } else { + /* Abort the read operation */ + EFX_POPULATE_OWORD_2(reg, + MD_RIC, 0, + MD_GC, 1); + falcon_write(efx, ®, MD_CS_REG_KER); + + EFX_LOG(efx, "read from GMII 0x%x register %02x, got " + "error %d\n", phy_id, addr, value); + } + + out: + spin_unlock_bh(&efx->phy_lock); + + return value; +} + +static void falcon_init_mdio(struct mii_if_info *gmii) +{ + gmii->mdio_read = falcon_mdio_read; + gmii->mdio_write = falcon_mdio_write; + gmii->phy_id_mask = FALCON_PHY_ID_MASK; + gmii->reg_num_mask = ((1 << EFX_WIDTH(MD_PHY_ADR)) - 1); +} + +static int falcon_probe_phy(struct efx_nic *efx) +{ + switch (efx->phy_type) { + case PHY_TYPE_10XPRESS: + efx->phy_op = &falcon_tenxpress_phy_ops; + break; + case PHY_TYPE_XFP: + efx->phy_op = &falcon_xfp_phy_ops; + break; + default: + EFX_ERR(efx, "Unknown PHY type %d\n", + efx->phy_type); + return -1; + } + return 0; +} + +/* This call is responsible for hooking in the MAC and PHY operations */ +int falcon_probe_port(struct efx_nic *efx) +{ + int rc; + + /* Hook in PHY operations table */ + rc = falcon_probe_phy(efx); + if (rc) + return rc; + + /* Set up GMII structure for PHY */ + efx->mii.supports_gmii = 1; + falcon_init_mdio(&efx->mii); + + /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ + if (FALCON_REV(efx) >= FALCON_REV_B0) + efx->flow_control = EFX_FC_RX | EFX_FC_TX; + else + efx->flow_control = EFX_FC_RX; + + /* Allocate buffer for stats */ + rc = falcon_alloc_buffer(efx, &efx->stats_buffer, + FALCON_MAC_STATS_SIZE); + if (rc) + return rc; + EFX_LOG(efx, "stats buffer at %llx (virt %p phys %lx)\n", + (unsigned long long)efx->stats_buffer.dma_addr, + efx->stats_buffer.addr, + virt_to_phys(efx->stats_buffer.addr)); + + return 0; +} + +void falcon_remove_port(struct efx_nic *efx) +{ + falcon_free_buffer(efx, &efx->stats_buffer); +} + +/************************************************************************** + * + * Multicast filtering + * + ************************************************************************** + */ + +void falcon_set_multicast_hash(struct efx_nic *efx) +{ + union efx_multicast_hash *mc_hash = &efx->multicast_hash; + + /* Broadcast packets go through the multicast hash filter. + * ether_crc_le() of the broadcast address is 0xbe2612ff + * so we always add bit 0xff to the mask. + */ + set_bit_le(0xff, mc_hash->byte); + + falcon_write(efx, &mc_hash->oword[0], MAC_MCAST_HASH_REG0_KER); + falcon_write(efx, &mc_hash->oword[1], MAC_MCAST_HASH_REG1_KER); +} + +/************************************************************************** + * + * Device reset + * + ************************************************************************** + */ + +/* Resets NIC to known state. This routine must be called in process + * context and is allowed to sleep. */ +int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) +{ + struct falcon_nic_data *nic_data = efx->nic_data; + efx_oword_t glb_ctl_reg_ker; + int rc; + + EFX_LOG(efx, "performing hardware reset (%d)\n", method); + + /* Initiate device reset */ + if (method == RESET_TYPE_WORLD) { + rc = pci_save_state(efx->pci_dev); + if (rc) { + EFX_ERR(efx, "failed to backup PCI state of primary " + "function prior to hardware reset\n"); + goto fail1; + } + if (FALCON_IS_DUAL_FUNC(efx)) { + rc = pci_save_state(nic_data->pci_dev2); + if (rc) { + EFX_ERR(efx, "failed to backup PCI state of " + "secondary function prior to " + "hardware reset\n"); + goto fail2; + } + } + + EFX_POPULATE_OWORD_2(glb_ctl_reg_ker, + EXT_PHY_RST_DUR, 0x7, + SWRST, 1); + } else { + int reset_phy = (method == RESET_TYPE_INVISIBLE ? + EXCLUDE_FROM_RESET : 0); + + EFX_POPULATE_OWORD_7(glb_ctl_reg_ker, + EXT_PHY_RST_CTL, reset_phy, + PCIE_CORE_RST_CTL, EXCLUDE_FROM_RESET, + PCIE_NSTCK_RST_CTL, EXCLUDE_FROM_RESET, + PCIE_SD_RST_CTL, EXCLUDE_FROM_RESET, + EE_RST_CTL, EXCLUDE_FROM_RESET, + EXT_PHY_RST_DUR, 0x7 /* 10ms */, + SWRST, 1); + } + falcon_write(efx, &glb_ctl_reg_ker, GLB_CTL_REG_KER); + + EFX_LOG(efx, "waiting for hardware reset\n"); + schedule_timeout_uninterruptible(HZ / 20); + + /* Restore PCI configuration if needed */ + if (method == RESET_TYPE_WORLD) { + if (FALCON_IS_DUAL_FUNC(efx)) { + rc = pci_restore_state(nic_data->pci_dev2); + if (rc) { + EFX_ERR(efx, "failed to restore PCI config for " + "the secondary function\n"); + goto fail3; + } + } + rc = pci_restore_state(efx->pci_dev); + if (rc) { + EFX_ERR(efx, "failed to restore PCI config for the " + "primary function\n"); + goto fail4; + } + EFX_LOG(efx, "successfully restored PCI config\n"); + } + + /* Assert that reset complete */ + falcon_read(efx, &glb_ctl_reg_ker, GLB_CTL_REG_KER); + if (EFX_OWORD_FIELD(glb_ctl_reg_ker, SWRST) != 0) { + rc = -ETIMEDOUT; + EFX_ERR(efx, "timed out waiting for hardware reset\n"); + goto fail5; + } + EFX_LOG(efx, "hardware reset complete\n"); + + return 0; + + /* pci_save_state() and pci_restore_state() MUST be called in pairs */ +fail2: +fail3: + pci_restore_state(efx->pci_dev); +fail1: +fail4: +fail5: + return rc; +} + +/* Zeroes out the SRAM contents. This routine must be called in + * process context and is allowed to sleep. + */ +static int falcon_reset_sram(struct efx_nic *efx) +{ + efx_oword_t srm_cfg_reg_ker, gpio_cfg_reg_ker; + int count; + + /* Set the SRAM wake/sleep GPIO appropriately. */ + falcon_read(efx, &gpio_cfg_reg_ker, GPIO_CTL_REG_KER); + EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, GPIO1_OEN, 1); + EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, GPIO1_OUT, 1); + falcon_write(efx, &gpio_cfg_reg_ker, GPIO_CTL_REG_KER); + + /* Initiate SRAM reset */ + EFX_POPULATE_OWORD_2(srm_cfg_reg_ker, + SRAM_OOB_BT_INIT_EN, 1, + SRM_NUM_BANKS_AND_BANK_SIZE, 0); + falcon_write(efx, &srm_cfg_reg_ker, SRM_CFG_REG_KER); + + /* Wait for SRAM reset to complete */ + count = 0; + do { + EFX_LOG(efx, "waiting for SRAM reset (attempt %d)...\n", count); + + /* SRAM reset is slow; expect around 16ms */ + schedule_timeout_uninterruptible(HZ / 50); + + /* Check for reset complete */ + falcon_read(efx, &srm_cfg_reg_ker, SRM_CFG_REG_KER); + if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, SRAM_OOB_BT_INIT_EN)) { + EFX_LOG(efx, "SRAM reset complete\n"); + + return 0; + } + } while (++count < 20); /* wait upto 0.4 sec */ + + EFX_ERR(efx, "timed out waiting for SRAM reset\n"); + return -ETIMEDOUT; +} + +/* Extract non-volatile configuration */ +static int falcon_probe_nvconfig(struct efx_nic *efx) +{ + struct falcon_nvconfig *nvconfig; + efx_oword_t nic_stat; + int device_id; + unsigned addr_len; + size_t offset, len; + int magic_num, struct_ver, board_rev; + int rc; + + /* Find the boot device. */ + falcon_read(efx, &nic_stat, NIC_STAT_REG); + if (EFX_OWORD_FIELD(nic_stat, SF_PRST)) { + device_id = EE_SPI_FLASH; + addr_len = 3; + } else if (EFX_OWORD_FIELD(nic_stat, EE_PRST)) { + device_id = EE_SPI_EEPROM; + addr_len = 2; + } else { + return -ENODEV; + } + + nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL); + + /* Read the whole configuration structure into memory. */ + for (offset = 0; offset < sizeof(*nvconfig); offset += len) { + len = min(sizeof(*nvconfig) - offset, + (size_t) FALCON_SPI_MAX_LEN); + rc = falcon_spi_read(efx, device_id, SPI_READ, + NVCONFIG_BASE + offset, addr_len, + (char *)nvconfig + offset, len); + if (rc) + goto out; + } + + /* Read the MAC addresses */ + memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN); + + /* Read the board configuration. */ + magic_num = le16_to_cpu(nvconfig->board_magic_num); + struct_ver = le16_to_cpu(nvconfig->board_struct_ver); + + if (magic_num != NVCONFIG_BOARD_MAGIC_NUM || struct_ver < 2) { + EFX_ERR(efx, "Non volatile memory bad magic=%x ver=%x " + "therefore using defaults\n", magic_num, struct_ver); + efx->phy_type = PHY_TYPE_NONE; + efx->mii.phy_id = PHY_ADDR_INVALID; + board_rev = 0; + } else { + struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2; + + efx->phy_type = v2->port0_phy_type; + efx->mii.phy_id = v2->port0_phy_addr; + board_rev = le16_to_cpu(v2->board_revision); + } + + EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mii.phy_id); + + efx_set_board_info(efx, board_rev); + + out: + kfree(nvconfig); + return rc; +} + +/* Probe the NIC variant (revision, ASIC vs FPGA, function count, port + * count, port speed). Set workaround and feature flags accordingly. + */ +static int falcon_probe_nic_variant(struct efx_nic *efx) +{ + efx_oword_t altera_build; + + falcon_read(efx, &altera_build, ALTERA_BUILD_REG_KER); + if (EFX_OWORD_FIELD(altera_build, VER_ALL)) { + EFX_ERR(efx, "Falcon FPGA not supported\n"); + return -ENODEV; + } + + switch (FALCON_REV(efx)) { + case FALCON_REV_A0: + case 0xff: + EFX_ERR(efx, "Falcon rev A0 not supported\n"); + return -ENODEV; + + case FALCON_REV_A1:{ + efx_oword_t nic_stat; + + falcon_read(efx, &nic_stat, NIC_STAT_REG); + + if (EFX_OWORD_FIELD(nic_stat, STRAP_PCIE) == 0) { + EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n"); + return -ENODEV; + } + if (!EFX_OWORD_FIELD(nic_stat, STRAP_10G)) { + EFX_ERR(efx, "1G mode not supported\n"); + return -ENODEV; + } + break; + } + + case FALCON_REV_B0: + break; + + default: + EFX_ERR(efx, "Unknown Falcon rev %d\n", FALCON_REV(efx)); + return -ENODEV; + } + + return 0; +} + +int falcon_probe_nic(struct efx_nic *efx) +{ + struct falcon_nic_data *nic_data; + int rc; + + /* Initialise I2C interface state */ + efx->i2c.efx = efx; + efx->i2c.op = &falcon_i2c_bit_operations; + efx->i2c.sda = 1; + efx->i2c.scl = 1; + + /* Allocate storage for hardware specific data */ + nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL); + efx->nic_data = (void *) nic_data; + + /* Determine number of ports etc. */ + rc = falcon_probe_nic_variant(efx); + if (rc) + goto fail1; + + /* Probe secondary function if expected */ + if (FALCON_IS_DUAL_FUNC(efx)) { + struct pci_dev *dev = pci_dev_get(efx->pci_dev); + + while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID, + dev))) { + if (dev->bus == efx->pci_dev->bus && + dev->devfn == efx->pci_dev->devfn + 1) { + nic_data->pci_dev2 = dev; + break; + } + } + if (!nic_data->pci_dev2) { + EFX_ERR(efx, "failed to find secondary function\n"); + rc = -ENODEV; + goto fail2; + } + } + + /* Now we can reset the NIC */ + rc = falcon_reset_hw(efx, RESET_TYPE_ALL); + if (rc) { + EFX_ERR(efx, "failed to reset NIC\n"); + goto fail3; + } + + /* Allocate memory for INT_KER */ + rc = falcon_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t)); + if (rc) + goto fail4; + BUG_ON(efx->irq_status.dma_addr & 0x0f); + + EFX_LOG(efx, "INT_KER at %llx (virt %p phys %lx)\n", + (unsigned long long)efx->irq_status.dma_addr, + efx->irq_status.addr, virt_to_phys(efx->irq_status.addr)); + + /* Read in the non-volatile configuration */ + rc = falcon_probe_nvconfig(efx); + if (rc) + goto fail5; + + return 0; + + fail5: + falcon_free_buffer(efx, &efx->irq_status); + fail4: + /* fall-thru */ + fail3: + if (nic_data->pci_dev2) { + pci_dev_put(nic_data->pci_dev2); + nic_data->pci_dev2 = NULL; + } + fail2: + /* fall-thru */ + fail1: + kfree(efx->nic_data); + return rc; +} + +/* This call performs hardware-specific global initialisation, such as + * defining the descriptor cache sizes and number of RSS channels. + * It does not set up any buffers, descriptor rings or event queues. + */ +int falcon_init_nic(struct efx_nic *efx) +{ + struct falcon_nic_data *data; + efx_oword_t temp; + unsigned thresh; + int rc; + + data = (struct falcon_nic_data *)efx->nic_data; + + /* Set up the address region register. This is only needed + * for the B0 FPGA, but since we are just pushing in the + * reset defaults this may as well be unconditional. */ + EFX_POPULATE_OWORD_4(temp, ADR_REGION0, 0, + ADR_REGION1, (1 << 16), + ADR_REGION2, (2 << 16), + ADR_REGION3, (3 << 16)); + falcon_write(efx, &temp, ADR_REGION_REG_KER); + + /* Use on-chip SRAM */ + falcon_read(efx, &temp, NIC_STAT_REG); + EFX_SET_OWORD_FIELD(temp, ONCHIP_SRAM, 1); + falcon_write(efx, &temp, NIC_STAT_REG); + + /* Set buffer table mode */ + EFX_POPULATE_OWORD_1(temp, BUF_TBL_MODE, BUF_TBL_MODE_FULL); + falcon_write(efx, &temp, BUF_TBL_CFG_REG_KER); + + rc = falcon_reset_sram(efx); + if (rc) + return rc; + + /* Set positions of descriptor caches in SRAM. */ + EFX_POPULATE_OWORD_1(temp, SRM_TX_DC_BASE_ADR, TX_DC_BASE / 8); + falcon_write(efx, &temp, SRM_TX_DC_CFG_REG_KER); + EFX_POPULATE_OWORD_1(temp, SRM_RX_DC_BASE_ADR, RX_DC_BASE / 8); + falcon_write(efx, &temp, SRM_RX_DC_CFG_REG_KER); + + /* Set TX descriptor cache size. */ + BUILD_BUG_ON(TX_DC_ENTRIES != (16 << TX_DC_ENTRIES_ORDER)); + EFX_POPULATE_OWORD_1(temp, TX_DC_SIZE, TX_DC_ENTRIES_ORDER); + falcon_write(efx, &temp, TX_DC_CFG_REG_KER); + + /* Set RX descriptor cache size. Set low watermark to size-8, as + * this allows most efficient prefetching. + */ + BUILD_BUG_ON(RX_DC_ENTRIES != (16 << RX_DC_ENTRIES_ORDER)); + EFX_POPULATE_OWORD_1(temp, RX_DC_SIZE, RX_DC_ENTRIES_ORDER); + falcon_write(efx, &temp, RX_DC_CFG_REG_KER); + EFX_POPULATE_OWORD_1(temp, RX_DC_PF_LWM, RX_DC_ENTRIES - 8); + falcon_write(efx, &temp, RX_DC_PF_WM_REG_KER); + + /* Clear the parity enables on the TX data fifos as + * they produce false parity errors because of timing issues + */ + if (EFX_WORKAROUND_5129(efx)) { + falcon_read(efx, &temp, SPARE_REG_KER); + EFX_SET_OWORD_FIELD(temp, MEM_PERR_EN_TX_DATA, 0); + falcon_write(efx, &temp, SPARE_REG_KER); + } + + /* Enable all the genuinely fatal interrupts. (They are still + * masked by the overall interrupt mask, controlled by + * falcon_interrupts()). + * + * Note: All other fatal interrupts are enabled + */ + EFX_POPULATE_OWORD_3(temp, + ILL_ADR_INT_KER_EN, 1, + RBUF_OWN_INT_KER_EN, 1, + TBUF_OWN_INT_KER_EN, 1); + EFX_INVERT_OWORD(temp); + falcon_write(efx, &temp, FATAL_INTR_REG_KER); + + /* Set number of RSS queues for receive path. */ + falcon_read(efx, &temp, RX_FILTER_CTL_REG); + if (FALCON_REV(efx) >= FALCON_REV_B0) + EFX_SET_OWORD_FIELD(temp, NUM_KER, 0); + else + EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1); + if (EFX_WORKAROUND_7244(efx)) { + EFX_SET_OWORD_FIELD(temp, UDP_FULL_SRCH_LIMIT, 8); + EFX_SET_OWORD_FIELD(temp, UDP_WILD_SRCH_LIMIT, 8); + EFX_SET_OWORD_FIELD(temp, TCP_FULL_SRCH_LIMIT, 8); + EFX_SET_OWORD_FIELD(temp, TCP_WILD_SRCH_LIMIT, 8); + } + falcon_write(efx, &temp, RX_FILTER_CTL_REG); + + falcon_setup_rss_indir_table(efx); + + /* Setup RX. Wait for descriptor is broken and must + * be disabled. RXDP recovery shouldn't be needed, but is. + */ + falcon_read(efx, &temp, RX_SELF_RST_REG_KER); + EFX_SET_OWORD_FIELD(temp, RX_NODESC_WAIT_DIS, 1); + EFX_SET_OWORD_FIELD(temp, RX_RECOVERY_EN, 1); + if (EFX_WORKAROUND_5583(efx)) + EFX_SET_OWORD_FIELD(temp, RX_ISCSI_DIS, 1); + falcon_write(efx, &temp, RX_SELF_RST_REG_KER); + + /* Disable the ugly timer-based TX DMA backoff and allow TX DMA to be + * controlled by the RX FIFO fill level. Set arbitration to one pkt/Q. + */ + falcon_read(efx, &temp, TX_CFG2_REG_KER); + EFX_SET_OWORD_FIELD(temp, TX_RX_SPACER, 0xfe); + EFX_SET_OWORD_FIELD(temp, TX_RX_SPACER_EN, 1); + EFX_SET_OWORD_FIELD(temp, TX_ONE_PKT_PER_Q, 1); + EFX_SET_OWORD_FIELD(temp, TX_CSR_PUSH_EN, 0); + EFX_SET_OWORD_FIELD(temp, TX_DIS_NON_IP_EV, 1); + /* Enable SW_EV to inherit in char driver - assume harmless here */ + EFX_SET_OWORD_FIELD(temp, TX_SW_EV_EN, 1); + /* Prefetch threshold 2 => fetch when descriptor cache half empty */ + EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2); + /* Squash TX of packets of 16 bytes or less */ + if (FALCON_REV(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx)) + EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1); + falcon_write(efx, &temp, TX_CFG2_REG_KER); + + /* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16 + * descriptors (which is bad). + */ + falcon_read(efx, &temp, TX_CFG_REG_KER); + EFX_SET_OWORD_FIELD(temp, TX_NO_EOP_DISC_EN, 0); + falcon_write(efx, &temp, TX_CFG_REG_KER); + + /* RX config */ + falcon_read(efx, &temp, RX_CFG_REG_KER); + EFX_SET_OWORD_FIELD_VER(efx, temp, RX_DESC_PUSH_EN, 0); + if (EFX_WORKAROUND_7575(efx)) + EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE, + (3 * 4096) / 32); + if (FALCON_REV(efx) >= FALCON_REV_B0) + EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1); + + /* RX FIFO flow control thresholds */ + thresh = ((rx_xon_thresh_bytes >= 0) ? + rx_xon_thresh_bytes : efx->type->rx_xon_thresh); + EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_MAC_TH, thresh / 256); + thresh = ((rx_xoff_thresh_bytes >= 0) ? + rx_xoff_thresh_bytes : efx->type->rx_xoff_thresh); + EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_MAC_TH, thresh / 256); + /* RX control FIFO thresholds [32 entries] */ + EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_TX_TH, 25); + EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_TX_TH, 20); + falcon_write(efx, &temp, RX_CFG_REG_KER); + + /* Set destination of both TX and RX Flush events */ + if (FALCON_REV(efx) >= FALCON_REV_B0) { + EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0); + falcon_write(efx, &temp, DP_CTRL_REG); + } + + return 0; +} + +void falcon_remove_nic(struct efx_nic *efx) +{ + struct falcon_nic_data *nic_data = efx->nic_data; + + falcon_free_buffer(efx, &efx->irq_status); + + (void) falcon_reset_hw(efx, RESET_TYPE_ALL); + + /* Release the second function after the reset */ + if (nic_data->pci_dev2) { + pci_dev_put(nic_data->pci_dev2); + nic_data->pci_dev2 = NULL; + } + + /* Tear down the private nic state */ + kfree(efx->nic_data); + efx->nic_data = NULL; +} + +void falcon_update_nic_stats(struct efx_nic *efx) +{ + efx_oword_t cnt; + + falcon_read(efx, &cnt, RX_NODESC_DROP_REG_KER); + efx->n_rx_nodesc_drop_cnt += EFX_OWORD_FIELD(cnt, RX_NODESC_DROP_CNT); +} + +/************************************************************************** + * + * Revision-dependent attributes used by efx.c + * + ************************************************************************** + */ + +struct efx_nic_type falcon_a_nic_type = { + .mem_bar = 2, + .mem_map_size = 0x20000, + .txd_ptr_tbl_base = TX_DESC_PTR_TBL_KER_A1, + .rxd_ptr_tbl_base = RX_DESC_PTR_TBL_KER_A1, + .buf_tbl_base = BUF_TBL_KER_A1, + .evq_ptr_tbl_base = EVQ_PTR_TBL_KER_A1, + .evq_rptr_tbl_base = EVQ_RPTR_REG_KER_A1, + .txd_ring_mask = FALCON_TXD_RING_MASK, + .rxd_ring_mask = FALCON_RXD_RING_MASK, + .evq_size = FALCON_EVQ_SIZE, + .max_dma_mask = FALCON_DMA_MASK, + .tx_dma_mask = FALCON_TX_DMA_MASK, + .bug5391_mask = 0xf, + .rx_xoff_thresh = 2048, + .rx_xon_thresh = 512, + .rx_buffer_padding = 0x24, + .max_interrupt_mode = EFX_INT_MODE_MSI, + .phys_addr_channels = 4, +}; + +struct efx_nic_type falcon_b_nic_type = { + .mem_bar = 2, + /* Map everything up to and including the RSS indirection + * table. Don't map MSI-X table, MSI-X PBA since Linux + * requires that they not be mapped. */ + .mem_map_size = RX_RSS_INDIR_TBL_B0 + 0x800, + .txd_ptr_tbl_base = TX_DESC_PTR_TBL_KER_B0, + .rxd_ptr_tbl_base = RX_DESC_PTR_TBL_KER_B0, + .buf_tbl_base = BUF_TBL_KER_B0, + .evq_ptr_tbl_base = EVQ_PTR_TBL_KER_B0, + .evq_rptr_tbl_base = EVQ_RPTR_REG_KER_B0, + .txd_ring_mask = FALCON_TXD_RING_MASK, + .rxd_ring_mask = FALCON_RXD_RING_MASK, + .evq_size = FALCON_EVQ_SIZE, + .max_dma_mask = FALCON_DMA_MASK, + .tx_dma_mask = FALCON_TX_DMA_MASK, + .bug5391_mask = 0, + .rx_xoff_thresh = 54272, /* ~80Kb - 3*max MTU */ + .rx_xon_thresh = 27648, /* ~3*max MTU */ + .rx_buffer_padding = 0, + .max_interrupt_mode = EFX_INT_MODE_MSIX, + .phys_addr_channels = 32, /* Hardware limit is 64, but the legacy + * interrupt handler only supports 32 + * channels */ +}; + diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h new file mode 100644 index 000000000000..6117403b0c03 --- /dev/null +++ b/drivers/net/sfc/falcon.h @@ -0,0 +1,130 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_FALCON_H +#define EFX_FALCON_H + +#include "net_driver.h" + +/* + * Falcon hardware control + */ + +enum falcon_revision { + FALCON_REV_A0 = 0, + FALCON_REV_A1 = 1, + FALCON_REV_B0 = 2, +}; + +#define FALCON_REV(efx) ((efx)->pci_dev->revision) + +extern struct efx_nic_type falcon_a_nic_type; +extern struct efx_nic_type falcon_b_nic_type; + +/************************************************************************** + * + * Externs + * + ************************************************************************** + */ + +/* TX data path */ +extern int falcon_probe_tx(struct efx_tx_queue *tx_queue); +extern int falcon_init_tx(struct efx_tx_queue *tx_queue); +extern void falcon_fini_tx(struct efx_tx_queue *tx_queue); +extern void falcon_remove_tx(struct efx_tx_queue *tx_queue); +extern void falcon_push_buffers(struct efx_tx_queue *tx_queue); + +/* RX data path */ +extern int falcon_probe_rx(struct efx_rx_queue *rx_queue); +extern int falcon_init_rx(struct efx_rx_queue *rx_queue); +extern void falcon_fini_rx(struct efx_rx_queue *rx_queue); +extern void falcon_remove_rx(struct efx_rx_queue *rx_queue); +extern void falcon_notify_rx_desc(struct efx_rx_queue *rx_queue); + +/* Event data path */ +extern int falcon_probe_eventq(struct efx_channel *channel); +extern int falcon_init_eventq(struct efx_channel *channel); +extern void falcon_fini_eventq(struct efx_channel *channel); +extern void falcon_remove_eventq(struct efx_channel *channel); +extern int falcon_process_eventq(struct efx_channel *channel, int *rx_quota); +extern void falcon_eventq_read_ack(struct efx_channel *channel); + +/* Ports */ +extern int falcon_probe_port(struct efx_nic *efx); +extern void falcon_remove_port(struct efx_nic *efx); + +/* MAC/PHY */ +extern int falcon_xaui_link_ok(struct efx_nic *efx); +extern int falcon_dma_stats(struct efx_nic *efx, + unsigned int done_offset); +extern void falcon_drain_tx_fifo(struct efx_nic *efx); +extern void falcon_deconfigure_mac_wrapper(struct efx_nic *efx); +extern void falcon_reconfigure_mac_wrapper(struct efx_nic *efx); + +/* Interrupts and test events */ +extern int falcon_init_interrupt(struct efx_nic *efx); +extern void falcon_enable_interrupts(struct efx_nic *efx); +extern void falcon_generate_test_event(struct efx_channel *channel, + unsigned int magic); +extern void falcon_generate_interrupt(struct efx_nic *efx); +extern void falcon_set_int_moderation(struct efx_channel *channel); +extern void falcon_disable_interrupts(struct efx_nic *efx); +extern void falcon_fini_interrupt(struct efx_nic *efx); + +/* Global Resources */ +extern int falcon_probe_nic(struct efx_nic *efx); +extern int falcon_probe_resources(struct efx_nic *efx); +extern int falcon_init_nic(struct efx_nic *efx); +extern int falcon_reset_hw(struct efx_nic *efx, enum reset_type method); +extern void falcon_remove_resources(struct efx_nic *efx); +extern void falcon_remove_nic(struct efx_nic *efx); +extern void falcon_update_nic_stats(struct efx_nic *efx); +extern void falcon_set_multicast_hash(struct efx_nic *efx); +extern int falcon_reset_xaui(struct efx_nic *efx); + +/************************************************************************** + * + * Falcon MAC stats + * + ************************************************************************** + */ + +#define FALCON_STAT_OFFSET(falcon_stat) EFX_VAL(falcon_stat, offset) +#define FALCON_STAT_WIDTH(falcon_stat) EFX_VAL(falcon_stat, WIDTH) + +/* Retrieve statistic from statistics block */ +#define FALCON_STAT(efx, falcon_stat, efx_stat) do { \ + if (FALCON_STAT_WIDTH(falcon_stat) == 16) \ + (efx)->mac_stats.efx_stat += le16_to_cpu( \ + *((__force __le16 *) \ + (efx->stats_buffer.addr + \ + FALCON_STAT_OFFSET(falcon_stat)))); \ + else if (FALCON_STAT_WIDTH(falcon_stat) == 32) \ + (efx)->mac_stats.efx_stat += le32_to_cpu( \ + *((__force __le32 *) \ + (efx->stats_buffer.addr + \ + FALCON_STAT_OFFSET(falcon_stat)))); \ + else \ + (efx)->mac_stats.efx_stat += le64_to_cpu( \ + *((__force __le64 *) \ + (efx->stats_buffer.addr + \ + FALCON_STAT_OFFSET(falcon_stat)))); \ + } while (0) + +#define FALCON_MAC_STATS_SIZE 0x100 + +#define MAC_DATA_LBN 0 +#define MAC_DATA_WIDTH 32 + +extern void falcon_generate_event(struct efx_channel *channel, + efx_qword_t *event); + +#endif /* EFX_FALCON_H */ diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h new file mode 100644 index 000000000000..0485a63eaff6 --- /dev/null +++ b/drivers/net/sfc/falcon_hwdefs.h @@ -0,0 +1,1135 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_FALCON_HWDEFS_H +#define EFX_FALCON_HWDEFS_H + +/* + * Falcon hardware value definitions. + * Falcon is the internal codename for the SFC4000 controller that is + * present in SFE400X evaluation boards + */ + +/************************************************************************** + * + * Falcon registers + * + ************************************************************************** + */ + +/* Address region register */ +#define ADR_REGION_REG_KER 0x00 +#define ADR_REGION0_LBN 0 +#define ADR_REGION0_WIDTH 18 +#define ADR_REGION1_LBN 32 +#define ADR_REGION1_WIDTH 18 +#define ADR_REGION2_LBN 64 +#define ADR_REGION2_WIDTH 18 +#define ADR_REGION3_LBN 96 +#define ADR_REGION3_WIDTH 18 + +/* Interrupt enable register */ +#define INT_EN_REG_KER 0x0010 +#define KER_INT_KER_LBN 3 +#define KER_INT_KER_WIDTH 1 +#define DRV_INT_EN_KER_LBN 0 +#define DRV_INT_EN_KER_WIDTH 1 + +/* Interrupt status address register */ +#define INT_ADR_REG_KER 0x0030 +#define NORM_INT_VEC_DIS_KER_LBN 64 +#define NORM_INT_VEC_DIS_KER_WIDTH 1 +#define INT_ADR_KER_LBN 0 +#define INT_ADR_KER_WIDTH EFX_DMA_TYPE_WIDTH(64) /* not 46 for this one */ + +/* Interrupt status register (B0 only) */ +#define INT_ISR0_B0 0x90 +#define INT_ISR1_B0 0xA0 + +/* Interrupt acknowledge register (A0/A1 only) */ +#define INT_ACK_REG_KER_A1 0x0050 +#define INT_ACK_DUMMY_DATA_LBN 0 +#define INT_ACK_DUMMY_DATA_WIDTH 32 + +/* Interrupt acknowledge work-around register (A0/A1 only )*/ +#define WORK_AROUND_BROKEN_PCI_READS_REG_KER_A1 0x0070 + +/* SPI host command register */ +#define EE_SPI_HCMD_REG_KER 0x0100 +#define EE_SPI_HCMD_CMD_EN_LBN 31 +#define EE_SPI_HCMD_CMD_EN_WIDTH 1 +#define EE_WR_TIMER_ACTIVE_LBN 28 +#define EE_WR_TIMER_ACTIVE_WIDTH 1 +#define EE_SPI_HCMD_SF_SEL_LBN 24 +#define EE_SPI_HCMD_SF_SEL_WIDTH 1 +#define EE_SPI_EEPROM 0 +#define EE_SPI_FLASH 1 +#define EE_SPI_HCMD_DABCNT_LBN 16 +#define EE_SPI_HCMD_DABCNT_WIDTH 5 +#define EE_SPI_HCMD_READ_LBN 15 +#define EE_SPI_HCMD_READ_WIDTH 1 +#define EE_SPI_READ 1 +#define EE_SPI_WRITE 0 +#define EE_SPI_HCMD_DUBCNT_LBN 12 +#define EE_SPI_HCMD_DUBCNT_WIDTH 2 +#define EE_SPI_HCMD_ADBCNT_LBN 8 +#define EE_SPI_HCMD_ADBCNT_WIDTH 2 +#define EE_SPI_HCMD_ENC_LBN 0 +#define EE_SPI_HCMD_ENC_WIDTH 8 + +/* SPI host address register */ +#define EE_SPI_HADR_REG_KER 0x0110 +#define EE_SPI_HADR_ADR_LBN 0 +#define EE_SPI_HADR_ADR_WIDTH 24 + +/* SPI host data register */ +#define EE_SPI_HDATA_REG_KER 0x0120 + +/* PCIE CORE ACCESS REG */ +#define PCIE_CORE_ADDR_PCIE_DEVICE_CTRL_STAT 0x68 +#define PCIE_CORE_ADDR_PCIE_LINK_CTRL_STAT 0x70 +#define PCIE_CORE_ADDR_ACK_RPL_TIMER 0x700 +#define PCIE_CORE_ADDR_ACK_FREQ 0x70C + +/* NIC status register */ +#define NIC_STAT_REG 0x0200 +#define ONCHIP_SRAM_LBN 16 +#define ONCHIP_SRAM_WIDTH 1 +#define SF_PRST_LBN 9 +#define SF_PRST_WIDTH 1 +#define EE_PRST_LBN 8 +#define EE_PRST_WIDTH 1 +/* See pic_mode_t for decoding of this field */ +/* These bit definitions are extrapolated from the list of numerical + * values for STRAP_PINS. + */ +#define STRAP_10G_LBN 2 +#define STRAP_10G_WIDTH 1 +#define STRAP_PCIE_LBN 0 +#define STRAP_PCIE_WIDTH 1 + +/* GPIO control register */ +#define GPIO_CTL_REG_KER 0x0210 +#define GPIO_OUTPUTS_LBN (16) +#define GPIO_OUTPUTS_WIDTH (4) +#define GPIO_INPUTS_LBN (8) +#define GPIO_DIRECTION_LBN (24) +#define GPIO_DIRECTION_WIDTH (4) +#define GPIO_DIRECTION_OUT (1) +#define GPIO_SRAM_SLEEP (1 << 1) + +#define GPIO3_OEN_LBN (GPIO_DIRECTION_LBN + 3) +#define GPIO3_OEN_WIDTH 1 +#define GPIO2_OEN_LBN (GPIO_DIRECTION_LBN + 2) +#define GPIO2_OEN_WIDTH 1 +#define GPIO1_OEN_LBN (GPIO_DIRECTION_LBN + 1) +#define GPIO1_OEN_WIDTH 1 +#define GPIO0_OEN_LBN (GPIO_DIRECTION_LBN + 0) +#define GPIO0_OEN_WIDTH 1 + +#define GPIO3_OUT_LBN (GPIO_OUTPUTS_LBN + 3) +#define GPIO3_OUT_WIDTH 1 +#define GPIO2_OUT_LBN (GPIO_OUTPUTS_LBN + 2) +#define GPIO2_OUT_WIDTH 1 +#define GPIO1_OUT_LBN (GPIO_OUTPUTS_LBN + 1) +#define GPIO1_OUT_WIDTH 1 +#define GPIO0_OUT_LBN (GPIO_OUTPUTS_LBN + 0) +#define GPIO0_OUT_WIDTH 1 + +#define GPIO3_IN_LBN (GPIO_INPUTS_LBN + 3) +#define GPIO3_IN_WIDTH 1 +#define GPIO2_IN_WIDTH 1 +#define GPIO1_IN_WIDTH 1 +#define GPIO0_IN_LBN (GPIO_INPUTS_LBN + 0) +#define GPIO0_IN_WIDTH 1 + +/* Global control register */ +#define GLB_CTL_REG_KER 0x0220 +#define EXT_PHY_RST_CTL_LBN 63 +#define EXT_PHY_RST_CTL_WIDTH 1 +#define PCIE_SD_RST_CTL_LBN 61 +#define PCIE_SD_RST_CTL_WIDTH 1 + +#define PCIE_NSTCK_RST_CTL_LBN 58 +#define PCIE_NSTCK_RST_CTL_WIDTH 1 +#define PCIE_CORE_RST_CTL_LBN 57 +#define PCIE_CORE_RST_CTL_WIDTH 1 +#define EE_RST_CTL_LBN 49 +#define EE_RST_CTL_WIDTH 1 +#define RST_XGRX_LBN 24 +#define RST_XGRX_WIDTH 1 +#define RST_XGTX_LBN 23 +#define RST_XGTX_WIDTH 1 +#define RST_EM_LBN 22 +#define RST_EM_WIDTH 1 +#define EXT_PHY_RST_DUR_LBN 1 +#define EXT_PHY_RST_DUR_WIDTH 3 +#define SWRST_LBN 0 +#define SWRST_WIDTH 1 +#define INCLUDE_IN_RESET 0 +#define EXCLUDE_FROM_RESET 1 + +/* Fatal interrupt register */ +#define FATAL_INTR_REG_KER 0x0230 +#define RBUF_OWN_INT_KER_EN_LBN 39 +#define RBUF_OWN_INT_KER_EN_WIDTH 1 +#define TBUF_OWN_INT_KER_EN_LBN 38 +#define TBUF_OWN_INT_KER_EN_WIDTH 1 +#define ILL_ADR_INT_KER_EN_LBN 33 +#define ILL_ADR_INT_KER_EN_WIDTH 1 +#define MEM_PERR_INT_KER_LBN 8 +#define MEM_PERR_INT_KER_WIDTH 1 +#define INT_KER_ERROR_LBN 0 +#define INT_KER_ERROR_WIDTH 12 + +#define DP_CTRL_REG 0x250 +#define FLS_EVQ_ID_LBN 0 +#define FLS_EVQ_ID_WIDTH 11 + +#define MEM_STAT_REG_KER 0x260 + +/* Debug probe register */ +#define DEBUG_BLK_SEL_MISC 7 +#define DEBUG_BLK_SEL_SERDES 6 +#define DEBUG_BLK_SEL_EM 5 +#define DEBUG_BLK_SEL_SR 4 +#define DEBUG_BLK_SEL_EV 3 +#define DEBUG_BLK_SEL_RX 2 +#define DEBUG_BLK_SEL_TX 1 +#define DEBUG_BLK_SEL_BIU 0 + +/* FPGA build version */ +#define ALTERA_BUILD_REG_KER 0x0300 +#define VER_ALL_LBN 0 +#define VER_ALL_WIDTH 32 + +/* Spare EEPROM bits register (flash 0x390) */ +#define SPARE_REG_KER 0x310 +#define MEM_PERR_EN_TX_DATA_LBN 72 +#define MEM_PERR_EN_TX_DATA_WIDTH 2 + +/* Timer table for kernel access */ +#define TIMER_CMD_REG_KER 0x420 +#define TIMER_MODE_LBN 12 +#define TIMER_MODE_WIDTH 2 +#define TIMER_MODE_DIS 0 +#define TIMER_MODE_INT_HLDOFF 2 +#define TIMER_VAL_LBN 0 +#define TIMER_VAL_WIDTH 12 + +/* Driver generated event register */ +#define DRV_EV_REG_KER 0x440 +#define DRV_EV_QID_LBN 64 +#define DRV_EV_QID_WIDTH 12 +#define DRV_EV_DATA_LBN 0 +#define DRV_EV_DATA_WIDTH 64 + +/* Buffer table configuration register */ +#define BUF_TBL_CFG_REG_KER 0x600 +#define BUF_TBL_MODE_LBN 3 +#define BUF_TBL_MODE_WIDTH 1 +#define BUF_TBL_MODE_HALF 0 +#define BUF_TBL_MODE_FULL 1 + +/* SRAM receive descriptor cache configuration register */ +#define SRM_RX_DC_CFG_REG_KER 0x610 +#define SRM_RX_DC_BASE_ADR_LBN 0 +#define SRM_RX_DC_BASE_ADR_WIDTH 21 + +/* SRAM transmit descriptor cache configuration register */ +#define SRM_TX_DC_CFG_REG_KER 0x620 +#define SRM_TX_DC_BASE_ADR_LBN 0 +#define SRM_TX_DC_BASE_ADR_WIDTH 21 + +/* SRAM configuration register */ +#define SRM_CFG_REG_KER 0x630 +#define SRAM_OOB_BT_INIT_EN_LBN 3 +#define SRAM_OOB_BT_INIT_EN_WIDTH 1 +#define SRM_NUM_BANKS_AND_BANK_SIZE_LBN 0 +#define SRM_NUM_BANKS_AND_BANK_SIZE_WIDTH 3 +#define SRM_NB_BSZ_1BANKS_2M 0 +#define SRM_NB_BSZ_1BANKS_4M 1 +#define SRM_NB_BSZ_1BANKS_8M 2 +#define SRM_NB_BSZ_DEFAULT 3 /* char driver will set the default */ +#define SRM_NB_BSZ_2BANKS_4M 4 +#define SRM_NB_BSZ_2BANKS_8M 5 +#define SRM_NB_BSZ_2BANKS_16M 6 +#define SRM_NB_BSZ_RESERVED 7 + +/* Special buffer table update register */ +#define BUF_TBL_UPD_REG_KER 0x0650 +#define BUF_UPD_CMD_LBN 63 +#define BUF_UPD_CMD_WIDTH 1 +#define BUF_CLR_CMD_LBN 62 +#define BUF_CLR_CMD_WIDTH 1 +#define BUF_CLR_END_ID_LBN 32 +#define BUF_CLR_END_ID_WIDTH 20 +#define BUF_CLR_START_ID_LBN 0 +#define BUF_CLR_START_ID_WIDTH 20 + +/* Receive configuration register */ +#define RX_CFG_REG_KER 0x800 + +/* B0 */ +#define RX_INGR_EN_B0_LBN 47 +#define RX_INGR_EN_B0_WIDTH 1 +#define RX_DESC_PUSH_EN_B0_LBN 43 +#define RX_DESC_PUSH_EN_B0_WIDTH 1 +#define RX_XON_TX_TH_B0_LBN 33 +#define RX_XON_TX_TH_B0_WIDTH 5 +#define RX_XOFF_TX_TH_B0_LBN 28 +#define RX_XOFF_TX_TH_B0_WIDTH 5 +#define RX_USR_BUF_SIZE_B0_LBN 19 +#define RX_USR_BUF_SIZE_B0_WIDTH 9 +#define RX_XON_MAC_TH_B0_LBN 10 +#define RX_XON_MAC_TH_B0_WIDTH 9 +#define RX_XOFF_MAC_TH_B0_LBN 1 +#define RX_XOFF_MAC_TH_B0_WIDTH 9 +#define RX_XOFF_MAC_EN_B0_LBN 0 +#define RX_XOFF_MAC_EN_B0_WIDTH 1 + +/* A1 */ +#define RX_DESC_PUSH_EN_A1_LBN 35 +#define RX_DESC_PUSH_EN_A1_WIDTH 1 +#define RX_XON_TX_TH_A1_LBN 25 +#define RX_XON_TX_TH_A1_WIDTH 5 +#define RX_XOFF_TX_TH_A1_LBN 20 +#define RX_XOFF_TX_TH_A1_WIDTH 5 +#define RX_USR_BUF_SIZE_A1_LBN 11 +#define RX_USR_BUF_SIZE_A1_WIDTH 9 +#define RX_XON_MAC_TH_A1_LBN 6 +#define RX_XON_MAC_TH_A1_WIDTH 5 +#define RX_XOFF_MAC_TH_A1_LBN 1 +#define RX_XOFF_MAC_TH_A1_WIDTH 5 +#define RX_XOFF_MAC_EN_A1_LBN 0 +#define RX_XOFF_MAC_EN_A1_WIDTH 1 + +/* Receive filter control register */ +#define RX_FILTER_CTL_REG 0x810 +#define UDP_FULL_SRCH_LIMIT_LBN 32 +#define UDP_FULL_SRCH_LIMIT_WIDTH 8 +#define NUM_KER_LBN 24 +#define NUM_KER_WIDTH 2 +#define UDP_WILD_SRCH_LIMIT_LBN 16 +#define UDP_WILD_SRCH_LIMIT_WIDTH 8 +#define TCP_WILD_SRCH_LIMIT_LBN 8 +#define TCP_WILD_SRCH_LIMIT_WIDTH 8 +#define TCP_FULL_SRCH_LIMIT_LBN 0 +#define TCP_FULL_SRCH_LIMIT_WIDTH 8 + +/* RX queue flush register */ +#define RX_FLUSH_DESCQ_REG_KER 0x0820 +#define RX_FLUSH_DESCQ_CMD_LBN 24 +#define RX_FLUSH_DESCQ_CMD_WIDTH 1 +#define RX_FLUSH_DESCQ_LBN 0 +#define RX_FLUSH_DESCQ_WIDTH 12 + +/* Receive descriptor update register */ +#define RX_DESC_UPD_REG_KER_DWORD (0x830 + 12) +#define RX_DESC_WPTR_DWORD_LBN 0 +#define RX_DESC_WPTR_DWORD_WIDTH 12 + +/* Receive descriptor cache configuration register */ +#define RX_DC_CFG_REG_KER 0x840 +#define RX_DC_SIZE_LBN 0 +#define RX_DC_SIZE_WIDTH 2 + +#define RX_DC_PF_WM_REG_KER 0x850 +#define RX_DC_PF_LWM_LBN 0 +#define RX_DC_PF_LWM_WIDTH 6 + +/* RX no descriptor drop counter */ +#define RX_NODESC_DROP_REG_KER 0x880 +#define RX_NODESC_DROP_CNT_LBN 0 +#define RX_NODESC_DROP_CNT_WIDTH 16 + +/* RX black magic register */ +#define RX_SELF_RST_REG_KER 0x890 +#define RX_ISCSI_DIS_LBN 17 +#define RX_ISCSI_DIS_WIDTH 1 +#define RX_NODESC_WAIT_DIS_LBN 9 +#define RX_NODESC_WAIT_DIS_WIDTH 1 +#define RX_RECOVERY_EN_LBN 8 +#define RX_RECOVERY_EN_WIDTH 1 + +/* TX queue flush register */ +#define TX_FLUSH_DESCQ_REG_KER 0x0a00 +#define TX_FLUSH_DESCQ_CMD_LBN 12 +#define TX_FLUSH_DESCQ_CMD_WIDTH 1 +#define TX_FLUSH_DESCQ_LBN 0 +#define TX_FLUSH_DESCQ_WIDTH 12 + +/* Transmit descriptor update register */ +#define TX_DESC_UPD_REG_KER_DWORD (0xa10 + 12) +#define TX_DESC_WPTR_DWORD_LBN 0 +#define TX_DESC_WPTR_DWORD_WIDTH 12 + +/* Transmit descriptor cache configuration register */ +#define TX_DC_CFG_REG_KER 0xa20 +#define TX_DC_SIZE_LBN 0 +#define TX_DC_SIZE_WIDTH 2 + +/* Transmit checksum configuration register (A0/A1 only) */ +#define TX_CHKSM_CFG_REG_KER_A1 0xa30 + +/* Transmit configuration register */ +#define TX_CFG_REG_KER 0xa50 +#define TX_NO_EOP_DISC_EN_LBN 5 +#define TX_NO_EOP_DISC_EN_WIDTH 1 + +/* Transmit configuration register 2 */ +#define TX_CFG2_REG_KER 0xa80 +#define TX_CSR_PUSH_EN_LBN 89 +#define TX_CSR_PUSH_EN_WIDTH 1 +#define TX_RX_SPACER_LBN 64 +#define TX_RX_SPACER_WIDTH 8 +#define TX_SW_EV_EN_LBN 59 +#define TX_SW_EV_EN_WIDTH 1 +#define TX_RX_SPACER_EN_LBN 57 +#define TX_RX_SPACER_EN_WIDTH 1 +#define TX_PREF_THRESHOLD_LBN 19 +#define TX_PREF_THRESHOLD_WIDTH 2 +#define TX_ONE_PKT_PER_Q_LBN 18 +#define TX_ONE_PKT_PER_Q_WIDTH 1 +#define TX_DIS_NON_IP_EV_LBN 17 +#define TX_DIS_NON_IP_EV_WIDTH 1 +#define TX_FLUSH_MIN_LEN_EN_B0_LBN 7 +#define TX_FLUSH_MIN_LEN_EN_B0_WIDTH 1 + +/* PHY management transmit data register */ +#define MD_TXD_REG_KER 0xc00 +#define MD_TXD_LBN 0 +#define MD_TXD_WIDTH 16 + +/* PHY management receive data register */ +#define MD_RXD_REG_KER 0xc10 +#define MD_RXD_LBN 0 +#define MD_RXD_WIDTH 16 + +/* PHY management configuration & status register */ +#define MD_CS_REG_KER 0xc20 +#define MD_GC_LBN 4 +#define MD_GC_WIDTH 1 +#define MD_RIC_LBN 2 +#define MD_RIC_WIDTH 1 +#define MD_RDC_LBN 1 +#define MD_RDC_WIDTH 1 +#define MD_WRC_LBN 0 +#define MD_WRC_WIDTH 1 + +/* PHY management PHY address register */ +#define MD_PHY_ADR_REG_KER 0xc30 +#define MD_PHY_ADR_LBN 0 +#define MD_PHY_ADR_WIDTH 16 + +/* PHY management ID register */ +#define MD_ID_REG_KER 0xc40 +#define MD_PRT_ADR_LBN 11 +#define MD_PRT_ADR_WIDTH 5 +#define MD_DEV_ADR_LBN 6 +#define MD_DEV_ADR_WIDTH 5 +/* Used for writing both at once */ +#define MD_PRT_DEV_ADR_LBN 6 +#define MD_PRT_DEV_ADR_WIDTH 10 + +/* PHY management status & mask register (DWORD read only) */ +#define MD_STAT_REG_KER 0xc50 +#define MD_BSERR_LBN 2 +#define MD_BSERR_WIDTH 1 +#define MD_LNFL_LBN 1 +#define MD_LNFL_WIDTH 1 +#define MD_BSY_LBN 0 +#define MD_BSY_WIDTH 1 + +/* Port 0 and 1 MAC stats registers */ +#define MAC0_STAT_DMA_REG_KER 0xc60 +#define MAC_STAT_DMA_CMD_LBN 48 +#define MAC_STAT_DMA_CMD_WIDTH 1 +#define MAC_STAT_DMA_ADR_LBN 0 +#define MAC_STAT_DMA_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46) + +/* Port 0 and 1 MAC control registers */ +#define MAC0_CTRL_REG_KER 0xc80 +#define MAC_XOFF_VAL_LBN 16 +#define MAC_XOFF_VAL_WIDTH 16 +#define TXFIFO_DRAIN_EN_B0_LBN 7 +#define TXFIFO_DRAIN_EN_B0_WIDTH 1 +#define MAC_BCAD_ACPT_LBN 4 +#define MAC_BCAD_ACPT_WIDTH 1 +#define MAC_UC_PROM_LBN 3 +#define MAC_UC_PROM_WIDTH 1 +#define MAC_LINK_STATUS_LBN 2 +#define MAC_LINK_STATUS_WIDTH 1 +#define MAC_SPEED_LBN 0 +#define MAC_SPEED_WIDTH 2 + +/* 10G XAUI XGXS default values */ +#define XX_TXDRV_DEQ_DEFAULT 0xe /* deq=.6 */ +#define XX_TXDRV_DTX_DEFAULT 0x5 /* 1.25 */ +#define XX_SD_CTL_DRV_DEFAULT 0 /* 20mA */ + +/* Multicast address hash table */ +#define MAC_MCAST_HASH_REG0_KER 0xca0 +#define MAC_MCAST_HASH_REG1_KER 0xcb0 + +/* GMAC registers */ +#define FALCON_GMAC_REGBANK 0xe00 +#define FALCON_GMAC_REGBANK_SIZE 0x200 +#define FALCON_GMAC_REG_SIZE 0x10 + +/* XMAC registers */ +#define FALCON_XMAC_REGBANK 0x1200 +#define FALCON_XMAC_REGBANK_SIZE 0x200 +#define FALCON_XMAC_REG_SIZE 0x10 + +/* XGMAC address register low */ +#define XM_ADR_LO_REG_MAC 0x00 +#define XM_ADR_3_LBN 24 +#define XM_ADR_3_WIDTH 8 +#define XM_ADR_2_LBN 16 +#define XM_ADR_2_WIDTH 8 +#define XM_ADR_1_LBN 8 +#define XM_ADR_1_WIDTH 8 +#define XM_ADR_0_LBN 0 +#define XM_ADR_0_WIDTH 8 + +/* XGMAC address register high */ +#define XM_ADR_HI_REG_MAC 0x01 +#define XM_ADR_5_LBN 8 +#define XM_ADR_5_WIDTH 8 +#define XM_ADR_4_LBN 0 +#define XM_ADR_4_WIDTH 8 + +/* XGMAC global configuration */ +#define XM_GLB_CFG_REG_MAC 0x02 +#define XM_RX_STAT_EN_LBN 11 +#define XM_RX_STAT_EN_WIDTH 1 +#define XM_TX_STAT_EN_LBN 10 +#define XM_TX_STAT_EN_WIDTH 1 +#define XM_RX_JUMBO_MODE_LBN 6 +#define XM_RX_JUMBO_MODE_WIDTH 1 +#define XM_INTCLR_MODE_LBN 3 +#define XM_INTCLR_MODE_WIDTH 1 +#define XM_CORE_RST_LBN 0 +#define XM_CORE_RST_WIDTH 1 + +/* XGMAC transmit configuration */ +#define XM_TX_CFG_REG_MAC 0x03 +#define XM_IPG_LBN 16 +#define XM_IPG_WIDTH 4 +#define XM_FCNTL_LBN 10 +#define XM_FCNTL_WIDTH 1 +#define XM_TXCRC_LBN 8 +#define XM_TXCRC_WIDTH 1 +#define XM_AUTO_PAD_LBN 5 +#define XM_AUTO_PAD_WIDTH 1 +#define XM_TX_PRMBL_LBN 2 +#define XM_TX_PRMBL_WIDTH 1 +#define XM_TXEN_LBN 1 +#define XM_TXEN_WIDTH 1 + +/* XGMAC receive configuration */ +#define XM_RX_CFG_REG_MAC 0x04 +#define XM_PASS_CRC_ERR_LBN 25 +#define XM_PASS_CRC_ERR_WIDTH 1 +#define XM_ACPT_ALL_MCAST_LBN 11 +#define XM_ACPT_ALL_MCAST_WIDTH 1 +#define XM_ACPT_ALL_UCAST_LBN 9 +#define XM_ACPT_ALL_UCAST_WIDTH 1 +#define XM_AUTO_DEPAD_LBN 8 +#define XM_AUTO_DEPAD_WIDTH 1 +#define XM_RXEN_LBN 1 +#define XM_RXEN_WIDTH 1 + +/* XGMAC management interrupt mask register */ +#define XM_MGT_INT_MSK_REG_MAC_B0 0x5 +#define XM_MSK_PRMBLE_ERR_LBN 2 +#define XM_MSK_PRMBLE_ERR_WIDTH 1 +#define XM_MSK_RMTFLT_LBN 1 +#define XM_MSK_RMTFLT_WIDTH 1 +#define XM_MSK_LCLFLT_LBN 0 +#define XM_MSK_LCLFLT_WIDTH 1 + +/* XGMAC flow control register */ +#define XM_FC_REG_MAC 0x7 +#define XM_PAUSE_TIME_LBN 16 +#define XM_PAUSE_TIME_WIDTH 16 +#define XM_DIS_FCNTL_LBN 0 +#define XM_DIS_FCNTL_WIDTH 1 + +/* XGMAC pause time count register */ +#define XM_PAUSE_TIME_REG_MAC 0x9 + +/* XGMAC transmit parameter register */ +#define XM_TX_PARAM_REG_MAC 0x0d +#define XM_TX_JUMBO_MODE_LBN 31 +#define XM_TX_JUMBO_MODE_WIDTH 1 +#define XM_MAX_TX_FRM_SIZE_LBN 16 +#define XM_MAX_TX_FRM_SIZE_WIDTH 14 + +/* XGMAC receive parameter register */ +#define XM_RX_PARAM_REG_MAC 0x0e +#define XM_MAX_RX_FRM_SIZE_LBN 0 +#define XM_MAX_RX_FRM_SIZE_WIDTH 14 + +/* XGMAC management interrupt status register */ +#define XM_MGT_INT_REG_MAC_B0 0x0f +#define XM_PRMBLE_ERR 2 +#define XM_PRMBLE_WIDTH 1 +#define XM_RMTFLT_LBN 1 +#define XM_RMTFLT_WIDTH 1 +#define XM_LCLFLT_LBN 0 +#define XM_LCLFLT_WIDTH 1 + +/* XGXS/XAUI powerdown/reset register */ +#define XX_PWR_RST_REG_MAC 0x10 + +#define XX_PWRDND_EN_LBN 15 +#define XX_PWRDND_EN_WIDTH 1 +#define XX_PWRDNC_EN_LBN 14 +#define XX_PWRDNC_EN_WIDTH 1 +#define XX_PWRDNB_EN_LBN 13 +#define XX_PWRDNB_EN_WIDTH 1 +#define XX_PWRDNA_EN_LBN 12 +#define XX_PWRDNA_EN_WIDTH 1 +#define XX_RSTPLLCD_EN_LBN 9 +#define XX_RSTPLLCD_EN_WIDTH 1 +#define XX_RSTPLLAB_EN_LBN 8 +#define XX_RSTPLLAB_EN_WIDTH 1 +#define XX_RESETD_EN_LBN 7 +#define XX_RESETD_EN_WIDTH 1 +#define XX_RESETC_EN_LBN 6 +#define XX_RESETC_EN_WIDTH 1 +#define XX_RESETB_EN_LBN 5 +#define XX_RESETB_EN_WIDTH 1 +#define XX_RESETA_EN_LBN 4 +#define XX_RESETA_EN_WIDTH 1 +#define XX_RSTXGXSRX_EN_LBN 2 +#define XX_RSTXGXSRX_EN_WIDTH 1 +#define XX_RSTXGXSTX_EN_LBN 1 +#define XX_RSTXGXSTX_EN_WIDTH 1 +#define XX_RST_XX_EN_LBN 0 +#define XX_RST_XX_EN_WIDTH 1 + +/* XGXS/XAUI powerdown/reset control register */ +#define XX_SD_CTL_REG_MAC 0x11 +#define XX_HIDRVD_LBN 15 +#define XX_HIDRVD_WIDTH 1 +#define XX_LODRVD_LBN 14 +#define XX_LODRVD_WIDTH 1 +#define XX_HIDRVC_LBN 13 +#define XX_HIDRVC_WIDTH 1 +#define XX_LODRVC_LBN 12 +#define XX_LODRVC_WIDTH 1 +#define XX_HIDRVB_LBN 11 +#define XX_HIDRVB_WIDTH 1 +#define XX_LODRVB_LBN 10 +#define XX_LODRVB_WIDTH 1 +#define XX_HIDRVA_LBN 9 +#define XX_HIDRVA_WIDTH 1 +#define XX_LODRVA_LBN 8 +#define XX_LODRVA_WIDTH 1 + +#define XX_TXDRV_CTL_REG_MAC 0x12 +#define XX_DEQD_LBN 28 +#define XX_DEQD_WIDTH 4 +#define XX_DEQC_LBN 24 +#define XX_DEQC_WIDTH 4 +#define XX_DEQB_LBN 20 +#define XX_DEQB_WIDTH 4 +#define XX_DEQA_LBN 16 +#define XX_DEQA_WIDTH 4 +#define XX_DTXD_LBN 12 +#define XX_DTXD_WIDTH 4 +#define XX_DTXC_LBN 8 +#define XX_DTXC_WIDTH 4 +#define XX_DTXB_LBN 4 +#define XX_DTXB_WIDTH 4 +#define XX_DTXA_LBN 0 +#define XX_DTXA_WIDTH 4 + +/* XAUI XGXS core status register */ +#define XX_FORCE_SIG_DECODE_FORCED 0xff +#define XX_CORE_STAT_REG_MAC 0x16 +#define XX_ALIGN_DONE_LBN 20 +#define XX_ALIGN_DONE_WIDTH 1 +#define XX_SYNC_STAT_LBN 16 +#define XX_SYNC_STAT_WIDTH 4 +#define XX_SYNC_STAT_DECODE_SYNCED 0xf +#define XX_COMMA_DET_LBN 12 +#define XX_COMMA_DET_WIDTH 4 +#define XX_COMMA_DET_DECODE_DETECTED 0xf +#define XX_COMMA_DET_RESET 0xf +#define XX_CHARERR_LBN 4 +#define XX_CHARERR_WIDTH 4 +#define XX_CHARERR_RESET 0xf +#define XX_DISPERR_LBN 0 +#define XX_DISPERR_WIDTH 4 +#define XX_DISPERR_RESET 0xf + +/* Receive filter table */ +#define RX_FILTER_TBL0 0xF00000 + +/* Receive descriptor pointer table */ +#define RX_DESC_PTR_TBL_KER_A1 0x11800 +#define RX_DESC_PTR_TBL_KER_B0 0xF40000 +#define RX_DESC_PTR_TBL_KER_P0 0x900 +#define RX_ISCSI_DDIG_EN_LBN 88 +#define RX_ISCSI_DDIG_EN_WIDTH 1 +#define RX_ISCSI_HDIG_EN_LBN 87 +#define RX_ISCSI_HDIG_EN_WIDTH 1 +#define RX_DESCQ_BUF_BASE_ID_LBN 36 +#define RX_DESCQ_BUF_BASE_ID_WIDTH 20 +#define RX_DESCQ_EVQ_ID_LBN 24 +#define RX_DESCQ_EVQ_ID_WIDTH 12 +#define RX_DESCQ_OWNER_ID_LBN 10 +#define RX_DESCQ_OWNER_ID_WIDTH 14 +#define RX_DESCQ_LABEL_LBN 5 +#define RX_DESCQ_LABEL_WIDTH 5 +#define RX_DESCQ_SIZE_LBN 3 +#define RX_DESCQ_SIZE_WIDTH 2 +#define RX_DESCQ_SIZE_4K 3 +#define RX_DESCQ_SIZE_2K 2 +#define RX_DESCQ_SIZE_1K 1 +#define RX_DESCQ_SIZE_512 0 +#define RX_DESCQ_TYPE_LBN 2 +#define RX_DESCQ_TYPE_WIDTH 1 +#define RX_DESCQ_JUMBO_LBN 1 +#define RX_DESCQ_JUMBO_WIDTH 1 +#define RX_DESCQ_EN_LBN 0 +#define RX_DESCQ_EN_WIDTH 1 + +/* Transmit descriptor pointer table */ +#define TX_DESC_PTR_TBL_KER_A1 0x11900 +#define TX_DESC_PTR_TBL_KER_B0 0xF50000 +#define TX_DESC_PTR_TBL_KER_P0 0xa40 +#define TX_NON_IP_DROP_DIS_B0_LBN 91 +#define TX_NON_IP_DROP_DIS_B0_WIDTH 1 +#define TX_IP_CHKSM_DIS_B0_LBN 90 +#define TX_IP_CHKSM_DIS_B0_WIDTH 1 +#define TX_TCP_CHKSM_DIS_B0_LBN 89 +#define TX_TCP_CHKSM_DIS_B0_WIDTH 1 +#define TX_DESCQ_EN_LBN 88 +#define TX_DESCQ_EN_WIDTH 1 +#define TX_ISCSI_DDIG_EN_LBN 87 +#define TX_ISCSI_DDIG_EN_WIDTH 1 +#define TX_ISCSI_HDIG_EN_LBN 86 +#define TX_ISCSI_HDIG_EN_WIDTH 1 +#define TX_DESCQ_BUF_BASE_ID_LBN 36 +#define TX_DESCQ_BUF_BASE_ID_WIDTH 20 +#define TX_DESCQ_EVQ_ID_LBN 24 +#define TX_DESCQ_EVQ_ID_WIDTH 12 +#define TX_DESCQ_OWNER_ID_LBN 10 +#define TX_DESCQ_OWNER_ID_WIDTH 14 +#define TX_DESCQ_LABEL_LBN 5 +#define TX_DESCQ_LABEL_WIDTH 5 +#define TX_DESCQ_SIZE_LBN 3 +#define TX_DESCQ_SIZE_WIDTH 2 +#define TX_DESCQ_SIZE_4K 3 +#define TX_DESCQ_SIZE_2K 2 +#define TX_DESCQ_SIZE_1K 1 +#define TX_DESCQ_SIZE_512 0 +#define TX_DESCQ_TYPE_LBN 1 +#define TX_DESCQ_TYPE_WIDTH 2 + +/* Event queue pointer */ +#define EVQ_PTR_TBL_KER_A1 0x11a00 +#define EVQ_PTR_TBL_KER_B0 0xf60000 +#define EVQ_PTR_TBL_KER_P0 0x500 +#define EVQ_EN_LBN 23 +#define EVQ_EN_WIDTH 1 +#define EVQ_SIZE_LBN 20 +#define EVQ_SIZE_WIDTH 3 +#define EVQ_SIZE_32K 6 +#define EVQ_SIZE_16K 5 +#define EVQ_SIZE_8K 4 +#define EVQ_SIZE_4K 3 +#define EVQ_SIZE_2K 2 +#define EVQ_SIZE_1K 1 +#define EVQ_SIZE_512 0 +#define EVQ_BUF_BASE_ID_LBN 0 +#define EVQ_BUF_BASE_ID_WIDTH 20 + +/* Event queue read pointer */ +#define EVQ_RPTR_REG_KER_A1 0x11b00 +#define EVQ_RPTR_REG_KER_B0 0xfa0000 +#define EVQ_RPTR_REG_KER_DWORD (EVQ_RPTR_REG_KER + 0) +#define EVQ_RPTR_DWORD_LBN 0 +#define EVQ_RPTR_DWORD_WIDTH 14 + +/* RSS indirection table */ +#define RX_RSS_INDIR_TBL_B0 0xFB0000 +#define RX_RSS_INDIR_ENT_B0_LBN 0 +#define RX_RSS_INDIR_ENT_B0_WIDTH 6 + +/* Special buffer descriptors (full-mode) */ +#define BUF_FULL_TBL_KER_A1 0x8000 +#define BUF_FULL_TBL_KER_B0 0x800000 +#define IP_DAT_BUF_SIZE_LBN 50 +#define IP_DAT_BUF_SIZE_WIDTH 1 +#define IP_DAT_BUF_SIZE_8K 1 +#define IP_DAT_BUF_SIZE_4K 0 +#define BUF_ADR_REGION_LBN 48 +#define BUF_ADR_REGION_WIDTH 2 +#define BUF_ADR_FBUF_LBN 14 +#define BUF_ADR_FBUF_WIDTH 34 +#define BUF_OWNER_ID_FBUF_LBN 0 +#define BUF_OWNER_ID_FBUF_WIDTH 14 + +/* Transmit descriptor */ +#define TX_KER_PORT_LBN 63 +#define TX_KER_PORT_WIDTH 1 +#define TX_KER_CONT_LBN 62 +#define TX_KER_CONT_WIDTH 1 +#define TX_KER_BYTE_CNT_LBN 48 +#define TX_KER_BYTE_CNT_WIDTH 14 +#define TX_KER_BUF_REGION_LBN 46 +#define TX_KER_BUF_REGION_WIDTH 2 +#define TX_KER_BUF_REGION0_DECODE 0 +#define TX_KER_BUF_REGION1_DECODE 1 +#define TX_KER_BUF_REGION2_DECODE 2 +#define TX_KER_BUF_REGION3_DECODE 3 +#define TX_KER_BUF_ADR_LBN 0 +#define TX_KER_BUF_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46) + +/* Receive descriptor */ +#define RX_KER_BUF_SIZE_LBN 48 +#define RX_KER_BUF_SIZE_WIDTH 14 +#define RX_KER_BUF_REGION_LBN 46 +#define RX_KER_BUF_REGION_WIDTH 2 +#define RX_KER_BUF_REGION0_DECODE 0 +#define RX_KER_BUF_REGION1_DECODE 1 +#define RX_KER_BUF_REGION2_DECODE 2 +#define RX_KER_BUF_REGION3_DECODE 3 +#define RX_KER_BUF_ADR_LBN 0 +#define RX_KER_BUF_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46) + +/************************************************************************** + * + * Falcon events + * + ************************************************************************** + */ + +/* Event queue entries */ +#define EV_CODE_LBN 60 +#define EV_CODE_WIDTH 4 +#define RX_IP_EV_DECODE 0 +#define TX_IP_EV_DECODE 2 +#define DRIVER_EV_DECODE 5 +#define GLOBAL_EV_DECODE 6 +#define DRV_GEN_EV_DECODE 7 +#define WHOLE_EVENT_LBN 0 +#define WHOLE_EVENT_WIDTH 64 + +/* Receive events */ +#define RX_EV_PKT_OK_LBN 56 +#define RX_EV_PKT_OK_WIDTH 1 +#define RX_EV_PAUSE_FRM_ERR_LBN 55 +#define RX_EV_PAUSE_FRM_ERR_WIDTH 1 +#define RX_EV_BUF_OWNER_ID_ERR_LBN 54 +#define RX_EV_BUF_OWNER_ID_ERR_WIDTH 1 +#define RX_EV_IF_FRAG_ERR_LBN 53 +#define RX_EV_IF_FRAG_ERR_WIDTH 1 +#define RX_EV_IP_HDR_CHKSUM_ERR_LBN 52 +#define RX_EV_IP_HDR_CHKSUM_ERR_WIDTH 1 +#define RX_EV_TCP_UDP_CHKSUM_ERR_LBN 51 +#define RX_EV_TCP_UDP_CHKSUM_ERR_WIDTH 1 +#define RX_EV_ETH_CRC_ERR_LBN 50 +#define RX_EV_ETH_CRC_ERR_WIDTH 1 +#define RX_EV_FRM_TRUNC_LBN 49 +#define RX_EV_FRM_TRUNC_WIDTH 1 +#define RX_EV_DRIB_NIB_LBN 48 +#define RX_EV_DRIB_NIB_WIDTH 1 +#define RX_EV_TOBE_DISC_LBN 47 +#define RX_EV_TOBE_DISC_WIDTH 1 +#define RX_EV_PKT_TYPE_LBN 44 +#define RX_EV_PKT_TYPE_WIDTH 3 +#define RX_EV_PKT_TYPE_ETH_DECODE 0 +#define RX_EV_PKT_TYPE_LLC_DECODE 1 +#define RX_EV_PKT_TYPE_JUMBO_DECODE 2 +#define RX_EV_PKT_TYPE_VLAN_DECODE 3 +#define RX_EV_PKT_TYPE_VLAN_LLC_DECODE 4 +#define RX_EV_PKT_TYPE_VLAN_JUMBO_DECODE 5 +#define RX_EV_HDR_TYPE_LBN 42 +#define RX_EV_HDR_TYPE_WIDTH 2 +#define RX_EV_HDR_TYPE_TCP_IPV4_DECODE 0 +#define RX_EV_HDR_TYPE_UDP_IPV4_DECODE 1 +#define RX_EV_HDR_TYPE_OTHER_IP_DECODE 2 +#define RX_EV_HDR_TYPE_NON_IP_DECODE 3 +#define RX_EV_HDR_TYPE_HAS_CHECKSUMS(hdr_type) \ + ((hdr_type) <= RX_EV_HDR_TYPE_UDP_IPV4_DECODE) +#define RX_EV_MCAST_HASH_MATCH_LBN 40 +#define RX_EV_MCAST_HASH_MATCH_WIDTH 1 +#define RX_EV_MCAST_PKT_LBN 39 +#define RX_EV_MCAST_PKT_WIDTH 1 +#define RX_EV_Q_LABEL_LBN 32 +#define RX_EV_Q_LABEL_WIDTH 5 +#define RX_EV_JUMBO_CONT_LBN 31 +#define RX_EV_JUMBO_CONT_WIDTH 1 +#define RX_EV_BYTE_CNT_LBN 16 +#define RX_EV_BYTE_CNT_WIDTH 14 +#define RX_EV_SOP_LBN 15 +#define RX_EV_SOP_WIDTH 1 +#define RX_EV_DESC_PTR_LBN 0 +#define RX_EV_DESC_PTR_WIDTH 12 + +/* Transmit events */ +#define TX_EV_PKT_ERR_LBN 38 +#define TX_EV_PKT_ERR_WIDTH 1 +#define TX_EV_Q_LABEL_LBN 32 +#define TX_EV_Q_LABEL_WIDTH 5 +#define TX_EV_WQ_FF_FULL_LBN 15 +#define TX_EV_WQ_FF_FULL_WIDTH 1 +#define TX_EV_COMP_LBN 12 +#define TX_EV_COMP_WIDTH 1 +#define TX_EV_DESC_PTR_LBN 0 +#define TX_EV_DESC_PTR_WIDTH 12 + +/* Driver events */ +#define DRIVER_EV_SUB_CODE_LBN 56 +#define DRIVER_EV_SUB_CODE_WIDTH 4 +#define DRIVER_EV_SUB_DATA_LBN 0 +#define DRIVER_EV_SUB_DATA_WIDTH 14 +#define TX_DESCQ_FLS_DONE_EV_DECODE 0 +#define RX_DESCQ_FLS_DONE_EV_DECODE 1 +#define EVQ_INIT_DONE_EV_DECODE 2 +#define EVQ_NOT_EN_EV_DECODE 3 +#define RX_DESCQ_FLSFF_OVFL_EV_DECODE 4 +#define SRM_UPD_DONE_EV_DECODE 5 +#define WAKE_UP_EV_DECODE 6 +#define TX_PKT_NON_TCP_UDP_DECODE 9 +#define TIMER_EV_DECODE 10 +#define RX_RECOVERY_EV_DECODE 11 +#define RX_DSC_ERROR_EV_DECODE 14 +#define TX_DSC_ERROR_EV_DECODE 15 +#define DRIVER_EV_TX_DESCQ_ID_LBN 0 +#define DRIVER_EV_TX_DESCQ_ID_WIDTH 12 +#define DRIVER_EV_RX_FLUSH_FAIL_LBN 12 +#define DRIVER_EV_RX_FLUSH_FAIL_WIDTH 1 +#define DRIVER_EV_RX_DESCQ_ID_LBN 0 +#define DRIVER_EV_RX_DESCQ_ID_WIDTH 12 +#define SRM_CLR_EV_DECODE 0 +#define SRM_UPD_EV_DECODE 1 +#define SRM_ILLCLR_EV_DECODE 2 + +/* Global events */ +#define RX_RECOVERY_B0_LBN 12 +#define RX_RECOVERY_B0_WIDTH 1 +#define XG_MNT_INTR_B0_LBN 11 +#define XG_MNT_INTR_B0_WIDTH 1 +#define RX_RECOVERY_A1_LBN 11 +#define RX_RECOVERY_A1_WIDTH 1 +#define XG_PHY_INTR_LBN 9 +#define XG_PHY_INTR_WIDTH 1 +#define G_PHY1_INTR_LBN 8 +#define G_PHY1_INTR_WIDTH 1 +#define G_PHY0_INTR_LBN 7 +#define G_PHY0_INTR_WIDTH 1 + +/* Driver-generated test events */ +#define EVQ_MAGIC_LBN 0 +#define EVQ_MAGIC_WIDTH 32 + +/************************************************************************** + * + * Falcon MAC stats + * + ************************************************************************** + * + */ +#define GRxGoodOct_offset 0x0 +#define GRxBadOct_offset 0x8 +#define GRxMissPkt_offset 0x10 +#define GRxFalseCRS_offset 0x14 +#define GRxPausePkt_offset 0x18 +#define GRxBadPkt_offset 0x1C +#define GRxUcastPkt_offset 0x20 +#define GRxMcastPkt_offset 0x24 +#define GRxBcastPkt_offset 0x28 +#define GRxGoodLt64Pkt_offset 0x2C +#define GRxBadLt64Pkt_offset 0x30 +#define GRx64Pkt_offset 0x34 +#define GRx65to127Pkt_offset 0x38 +#define GRx128to255Pkt_offset 0x3C +#define GRx256to511Pkt_offset 0x40 +#define GRx512to1023Pkt_offset 0x44 +#define GRx1024to15xxPkt_offset 0x48 +#define GRx15xxtoJumboPkt_offset 0x4C +#define GRxGtJumboPkt_offset 0x50 +#define GRxFcsErr64to15xxPkt_offset 0x54 +#define GRxFcsErr15xxtoJumboPkt_offset 0x58 +#define GRxFcsErrGtJumboPkt_offset 0x5C +#define GTxGoodBadOct_offset 0x80 +#define GTxGoodOct_offset 0x88 +#define GTxSglColPkt_offset 0x90 +#define GTxMultColPkt_offset 0x94 +#define GTxExColPkt_offset 0x98 +#define GTxDefPkt_offset 0x9C +#define GTxLateCol_offset 0xA0 +#define GTxExDefPkt_offset 0xA4 +#define GTxPausePkt_offset 0xA8 +#define GTxBadPkt_offset 0xAC +#define GTxUcastPkt_offset 0xB0 +#define GTxMcastPkt_offset 0xB4 +#define GTxBcastPkt_offset 0xB8 +#define GTxLt64Pkt_offset 0xBC +#define GTx64Pkt_offset 0xC0 +#define GTx65to127Pkt_offset 0xC4 +#define GTx128to255Pkt_offset 0xC8 +#define GTx256to511Pkt_offset 0xCC +#define GTx512to1023Pkt_offset 0xD0 +#define GTx1024to15xxPkt_offset 0xD4 +#define GTx15xxtoJumboPkt_offset 0xD8 +#define GTxGtJumboPkt_offset 0xDC +#define GTxNonTcpUdpPkt_offset 0xE0 +#define GTxMacSrcErrPkt_offset 0xE4 +#define GTxIpSrcErrPkt_offset 0xE8 +#define GDmaDone_offset 0xEC + +#define XgRxOctets_offset 0x0 +#define XgRxOctets_WIDTH 48 +#define XgRxOctetsOK_offset 0x8 +#define XgRxOctetsOK_WIDTH 48 +#define XgRxPkts_offset 0x10 +#define XgRxPkts_WIDTH 32 +#define XgRxPktsOK_offset 0x14 +#define XgRxPktsOK_WIDTH 32 +#define XgRxBroadcastPkts_offset 0x18 +#define XgRxBroadcastPkts_WIDTH 32 +#define XgRxMulticastPkts_offset 0x1C +#define XgRxMulticastPkts_WIDTH 32 +#define XgRxUnicastPkts_offset 0x20 +#define XgRxUnicastPkts_WIDTH 32 +#define XgRxUndersizePkts_offset 0x24 +#define XgRxUndersizePkts_WIDTH 32 +#define XgRxOversizePkts_offset 0x28 +#define XgRxOversizePkts_WIDTH 32 +#define XgRxJabberPkts_offset 0x2C +#define XgRxJabberPkts_WIDTH 32 +#define XgRxUndersizeFCSerrorPkts_offset 0x30 +#define XgRxUndersizeFCSerrorPkts_WIDTH 32 +#define XgRxDropEvents_offset 0x34 +#define XgRxDropEvents_WIDTH 32 +#define XgRxFCSerrorPkts_offset 0x38 +#define XgRxFCSerrorPkts_WIDTH 32 +#define XgRxAlignError_offset 0x3C +#define XgRxAlignError_WIDTH 32 +#define XgRxSymbolError_offset 0x40 +#define XgRxSymbolError_WIDTH 32 +#define XgRxInternalMACError_offset 0x44 +#define XgRxInternalMACError_WIDTH 32 +#define XgRxControlPkts_offset 0x48 +#define XgRxControlPkts_WIDTH 32 +#define XgRxPausePkts_offset 0x4C +#define XgRxPausePkts_WIDTH 32 +#define XgRxPkts64Octets_offset 0x50 +#define XgRxPkts64Octets_WIDTH 32 +#define XgRxPkts65to127Octets_offset 0x54 +#define XgRxPkts65to127Octets_WIDTH 32 +#define XgRxPkts128to255Octets_offset 0x58 +#define XgRxPkts128to255Octets_WIDTH 32 +#define XgRxPkts256to511Octets_offset 0x5C +#define XgRxPkts256to511Octets_WIDTH 32 +#define XgRxPkts512to1023Octets_offset 0x60 +#define XgRxPkts512to1023Octets_WIDTH 32 +#define XgRxPkts1024to15xxOctets_offset 0x64 +#define XgRxPkts1024to15xxOctets_WIDTH 32 +#define XgRxPkts15xxtoMaxOctets_offset 0x68 +#define XgRxPkts15xxtoMaxOctets_WIDTH 32 +#define XgRxLengthError_offset 0x6C +#define XgRxLengthError_WIDTH 32 +#define XgTxPkts_offset 0x80 +#define XgTxPkts_WIDTH 32 +#define XgTxOctets_offset 0x88 +#define XgTxOctets_WIDTH 48 +#define XgTxMulticastPkts_offset 0x90 +#define XgTxMulticastPkts_WIDTH 32 +#define XgTxBroadcastPkts_offset 0x94 +#define XgTxBroadcastPkts_WIDTH 32 +#define XgTxUnicastPkts_offset 0x98 +#define XgTxUnicastPkts_WIDTH 32 +#define XgTxControlPkts_offset 0x9C +#define XgTxControlPkts_WIDTH 32 +#define XgTxPausePkts_offset 0xA0 +#define XgTxPausePkts_WIDTH 32 +#define XgTxPkts64Octets_offset 0xA4 +#define XgTxPkts64Octets_WIDTH 32 +#define XgTxPkts65to127Octets_offset 0xA8 +#define XgTxPkts65to127Octets_WIDTH 32 +#define XgTxPkts128to255Octets_offset 0xAC +#define XgTxPkts128to255Octets_WIDTH 32 +#define XgTxPkts256to511Octets_offset 0xB0 +#define XgTxPkts256to511Octets_WIDTH 32 +#define XgTxPkts512to1023Octets_offset 0xB4 +#define XgTxPkts512to1023Octets_WIDTH 32 +#define XgTxPkts1024to15xxOctets_offset 0xB8 +#define XgTxPkts1024to15xxOctets_WIDTH 32 +#define XgTxPkts1519toMaxOctets_offset 0xBC +#define XgTxPkts1519toMaxOctets_WIDTH 32 +#define XgTxUndersizePkts_offset 0xC0 +#define XgTxUndersizePkts_WIDTH 32 +#define XgTxOversizePkts_offset 0xC4 +#define XgTxOversizePkts_WIDTH 32 +#define XgTxNonTcpUdpPkt_offset 0xC8 +#define XgTxNonTcpUdpPkt_WIDTH 16 +#define XgTxMacSrcErrPkt_offset 0xCC +#define XgTxMacSrcErrPkt_WIDTH 16 +#define XgTxIpSrcErrPkt_offset 0xD0 +#define XgTxIpSrcErrPkt_WIDTH 16 +#define XgDmaDone_offset 0xD4 + +#define FALCON_STATS_NOT_DONE 0x00000000 +#define FALCON_STATS_DONE 0xffffffff + +/* Interrupt status register bits */ +#define FATAL_INT_LBN 64 +#define FATAL_INT_WIDTH 1 +#define INT_EVQS_LBN 40 +#define INT_EVQS_WIDTH 4 + +/************************************************************************** + * + * Falcon non-volatile configuration + * + ************************************************************************** + */ + +/* Board configuration v2 (v1 is obsolete; later versions are compatible) */ +struct falcon_nvconfig_board_v2 { + __le16 nports; + u8 port0_phy_addr; + u8 port0_phy_type; + u8 port1_phy_addr; + u8 port1_phy_type; + __le16 asic_sub_revision; + __le16 board_revision; +} __attribute__ ((packed)); + +#define NVCONFIG_BASE 0x300 +#define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C +struct falcon_nvconfig { + efx_oword_t ee_vpd_cfg_reg; /* 0x300 */ + u8 mac_address[2][8]; /* 0x310 */ + efx_oword_t pcie_sd_ctl0123_reg; /* 0x320 */ + efx_oword_t pcie_sd_ctl45_reg; /* 0x330 */ + efx_oword_t pcie_pcs_ctl_stat_reg; /* 0x340 */ + efx_oword_t hw_init_reg; /* 0x350 */ + efx_oword_t nic_stat_reg; /* 0x360 */ + efx_oword_t glb_ctl_reg; /* 0x370 */ + efx_oword_t srm_cfg_reg; /* 0x380 */ + efx_oword_t spare_reg; /* 0x390 */ + __le16 board_magic_num; /* 0x3A0 */ + __le16 board_struct_ver; + __le16 board_checksum; + struct falcon_nvconfig_board_v2 board_v2; +} __attribute__ ((packed)); + +#endif /* EFX_FALCON_HWDEFS_H */ diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h new file mode 100644 index 000000000000..ea08184ddfa9 --- /dev/null +++ b/drivers/net/sfc/falcon_io.h @@ -0,0 +1,243 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_FALCON_IO_H +#define EFX_FALCON_IO_H + +#include <linux/io.h> +#include <linux/spinlock.h> +#include "net_driver.h" + +/************************************************************************** + * + * Falcon hardware access + * + ************************************************************************** + * + * Notes on locking strategy: + * + * Most Falcon registers require 16-byte (or 8-byte, for SRAM + * registers) atomic writes which necessitates locking. + * Under normal operation few writes to the Falcon BAR are made and these + * registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and TX_DESC_UPD_REG) are special + * cased to allow 4-byte (hence lockless) accesses. + * + * It *is* safe to write to these 4-byte registers in the middle of an + * access to an 8-byte or 16-byte register. We therefore use a + * spinlock to protect accesses to the larger registers, but no locks + * for the 4-byte registers. + * + * A write barrier is needed to ensure that DW3 is written after DW0/1/2 + * due to the way the 16byte registers are "collected" in the Falcon BIU + * + * We also lock when carrying out reads, to ensure consistency of the + * data (made possible since the BIU reads all 128 bits into a cache). + * Reads are very rare, so this isn't a significant performance + * impact. (Most data transferred from NIC to host is DMAed directly + * into host memory). + * + * I/O BAR access uses locks for both reads and writes (but is only provided + * for testing purposes). + */ + +/* Special buffer descriptors (Falcon SRAM) */ +#define BUF_TBL_KER_A1 0x18000 +#define BUF_TBL_KER_B0 0x800000 + + +#if BITS_PER_LONG == 64 +#define FALCON_USE_QWORD_IO 1 +#endif + +#define _falcon_writeq(efx, value, reg) \ + __raw_writeq((__force u64) (value), (efx)->membase + (reg)) +#define _falcon_writel(efx, value, reg) \ + __raw_writel((__force u32) (value), (efx)->membase + (reg)) +#define _falcon_readq(efx, reg) \ + ((__force __le64) __raw_readq((efx)->membase + (reg))) +#define _falcon_readl(efx, reg) \ + ((__force __le32) __raw_readl((efx)->membase + (reg))) + +/* Writes to a normal 16-byte Falcon register, locking as appropriate. */ +static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value, + unsigned int reg) +{ + unsigned long flags; + + EFX_REGDUMP(efx, "writing register %x with " EFX_OWORD_FMT "\n", reg, + EFX_OWORD_VAL(*value)); + + spin_lock_irqsave(&efx->biu_lock, flags); +#ifdef FALCON_USE_QWORD_IO + _falcon_writeq(efx, value->u64[0], reg + 0); + wmb(); + _falcon_writeq(efx, value->u64[1], reg + 8); +#else + _falcon_writel(efx, value->u32[0], reg + 0); + _falcon_writel(efx, value->u32[1], reg + 4); + _falcon_writel(efx, value->u32[2], reg + 8); + wmb(); + _falcon_writel(efx, value->u32[3], reg + 12); +#endif + mmiowb(); + spin_unlock_irqrestore(&efx->biu_lock, flags); +} + +/* Writes to an 8-byte Falcon SRAM register, locking as appropriate. */ +static inline void falcon_write_sram(struct efx_nic *efx, efx_qword_t *value, + unsigned int index) +{ + unsigned int reg = efx->type->buf_tbl_base + (index * sizeof(*value)); + unsigned long flags; + + EFX_REGDUMP(efx, "writing SRAM register %x with " EFX_QWORD_FMT "\n", + reg, EFX_QWORD_VAL(*value)); + + spin_lock_irqsave(&efx->biu_lock, flags); +#ifdef FALCON_USE_QWORD_IO + _falcon_writeq(efx, value->u64[0], reg + 0); +#else + _falcon_writel(efx, value->u32[0], reg + 0); + wmb(); + _falcon_writel(efx, value->u32[1], reg + 4); +#endif + mmiowb(); + spin_unlock_irqrestore(&efx->biu_lock, flags); +} + +/* Write dword to Falcon register that allows partial writes + * + * Some Falcon registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and + * TX_DESC_UPD_REG) can be written to as a single dword. This allows + * for lockless writes. + */ +static inline void falcon_writel(struct efx_nic *efx, efx_dword_t *value, + unsigned int reg) +{ + EFX_REGDUMP(efx, "writing partial register %x with "EFX_DWORD_FMT"\n", + reg, EFX_DWORD_VAL(*value)); + + /* No lock required */ + _falcon_writel(efx, value->u32[0], reg); +} + +/* Read from a Falcon register + * + * This reads an entire 16-byte Falcon register in one go, locking as + * appropriate. It is essential to read the first dword first, as this + * prompts Falcon to load the current value into the shadow register. + */ +static inline void falcon_read(struct efx_nic *efx, efx_oword_t *value, + unsigned int reg) +{ + unsigned long flags; + + spin_lock_irqsave(&efx->biu_lock, flags); + value->u32[0] = _falcon_readl(efx, reg + 0); + rmb(); + value->u32[1] = _falcon_readl(efx, reg + 4); + value->u32[2] = _falcon_readl(efx, reg + 8); + value->u32[3] = _falcon_readl(efx, reg + 12); + spin_unlock_irqrestore(&efx->biu_lock, flags); + + EFX_REGDUMP(efx, "read from register %x, got " EFX_OWORD_FMT "\n", reg, + EFX_OWORD_VAL(*value)); +} + +/* This reads an 8-byte Falcon SRAM entry in one go. */ +static inline void falcon_read_sram(struct efx_nic *efx, efx_qword_t *value, + unsigned int index) +{ + unsigned int reg = efx->type->buf_tbl_base + (index * sizeof(*value)); + unsigned long flags; + + spin_lock_irqsave(&efx->biu_lock, flags); +#ifdef FALCON_USE_QWORD_IO + value->u64[0] = _falcon_readq(efx, reg + 0); +#else + value->u32[0] = _falcon_readl(efx, reg + 0); + rmb(); + value->u32[1] = _falcon_readl(efx, reg + 4); +#endif + spin_unlock_irqrestore(&efx->biu_lock, flags); + + EFX_REGDUMP(efx, "read from SRAM register %x, got "EFX_QWORD_FMT"\n", + reg, EFX_QWORD_VAL(*value)); +} + +/* Read dword from Falcon register that allows partial writes (sic) */ +static inline void falcon_readl(struct efx_nic *efx, efx_dword_t *value, + unsigned int reg) +{ + value->u32[0] = _falcon_readl(efx, reg); + EFX_REGDUMP(efx, "read from register %x, got "EFX_DWORD_FMT"\n", + reg, EFX_DWORD_VAL(*value)); +} + +/* Write to a register forming part of a table */ +static inline void falcon_write_table(struct efx_nic *efx, efx_oword_t *value, + unsigned int reg, unsigned int index) +{ + falcon_write(efx, value, reg + index * sizeof(efx_oword_t)); +} + +/* Read to a register forming part of a table */ +static inline void falcon_read_table(struct efx_nic *efx, efx_oword_t *value, + unsigned int reg, unsigned int index) +{ + falcon_read(efx, value, reg + index * sizeof(efx_oword_t)); +} + +/* Write to a dword register forming part of a table */ +static inline void falcon_writel_table(struct efx_nic *efx, efx_dword_t *value, + unsigned int reg, unsigned int index) +{ + falcon_writel(efx, value, reg + index * sizeof(efx_oword_t)); +} + +/* Page-mapped register block size */ +#define FALCON_PAGE_BLOCK_SIZE 0x2000 + +/* Calculate offset to page-mapped register block */ +#define FALCON_PAGED_REG(page, reg) \ + ((page) * FALCON_PAGE_BLOCK_SIZE + (reg)) + +/* As for falcon_write(), but for a page-mapped register. */ +static inline void falcon_write_page(struct efx_nic *efx, efx_oword_t *value, + unsigned int reg, unsigned int page) +{ + falcon_write(efx, value, FALCON_PAGED_REG(page, reg)); +} + +/* As for falcon_writel(), but for a page-mapped register. */ +static inline void falcon_writel_page(struct efx_nic *efx, efx_dword_t *value, + unsigned int reg, unsigned int page) +{ + falcon_writel(efx, value, FALCON_PAGED_REG(page, reg)); +} + +/* Write dword to Falcon page-mapped register with an extra lock. + * + * As for falcon_writel_page(), but for a register that suffers from + * SFC bug 3181. Take out a lock so the BIU collector cannot be + * confused. */ +static inline void falcon_writel_page_locked(struct efx_nic *efx, + efx_dword_t *value, + unsigned int reg, + unsigned int page) +{ + unsigned long flags; + + spin_lock_irqsave(&efx->biu_lock, flags); + falcon_writel(efx, value, FALCON_PAGED_REG(page, reg)); + spin_unlock_irqrestore(&efx->biu_lock, flags); +} + +#endif /* EFX_FALCON_IO_H */ diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c new file mode 100644 index 000000000000..aa7521b24a5d --- /dev/null +++ b/drivers/net/sfc/falcon_xmac.c @@ -0,0 +1,585 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/delay.h> +#include "net_driver.h" +#include "efx.h" +#include "falcon.h" +#include "falcon_hwdefs.h" +#include "falcon_io.h" +#include "mac.h" +#include "gmii.h" +#include "mdio_10g.h" +#include "phy.h" +#include "boards.h" +#include "workarounds.h" + +/************************************************************************** + * + * MAC register access + * + **************************************************************************/ + +/* Offset of an XMAC register within Falcon */ +#define FALCON_XMAC_REG(mac_reg) \ + (FALCON_XMAC_REGBANK + ((mac_reg) * FALCON_XMAC_REG_SIZE)) + +void falcon_xmac_writel(struct efx_nic *efx, + efx_dword_t *value, unsigned int mac_reg) +{ + efx_oword_t temp; + + EFX_POPULATE_OWORD_1(temp, MAC_DATA, EFX_DWORD_FIELD(*value, MAC_DATA)); + falcon_write(efx, &temp, FALCON_XMAC_REG(mac_reg)); +} + +void falcon_xmac_readl(struct efx_nic *efx, + efx_dword_t *value, unsigned int mac_reg) +{ + efx_oword_t temp; + + falcon_read(efx, &temp, FALCON_XMAC_REG(mac_reg)); + EFX_POPULATE_DWORD_1(*value, MAC_DATA, EFX_OWORD_FIELD(temp, MAC_DATA)); +} + +/************************************************************************** + * + * MAC operations + * + *************************************************************************/ +static int falcon_reset_xmac(struct efx_nic *efx) +{ + efx_dword_t reg; + int count; + + EFX_POPULATE_DWORD_1(reg, XM_CORE_RST, 1); + falcon_xmac_writel(efx, ®, XM_GLB_CFG_REG_MAC); + + for (count = 0; count < 10000; count++) { /* wait upto 100ms */ + falcon_xmac_readl(efx, ®, XM_GLB_CFG_REG_MAC); + if (EFX_DWORD_FIELD(reg, XM_CORE_RST) == 0) + return 0; + udelay(10); + } + + EFX_ERR(efx, "timed out waiting for XMAC core reset\n"); + return -ETIMEDOUT; +} + +/* Configure the XAUI driver that is an output from Falcon */ +static void falcon_setup_xaui(struct efx_nic *efx) +{ + efx_dword_t sdctl, txdrv; + + /* Move the XAUI into low power, unless there is no PHY, in + * which case the XAUI will have to drive a cable. */ + if (efx->phy_type == PHY_TYPE_NONE) + return; + + falcon_xmac_readl(efx, &sdctl, XX_SD_CTL_REG_MAC); + EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVD, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_DWORD_FIELD(sdctl, XX_LODRVD, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVC, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_DWORD_FIELD(sdctl, XX_LODRVC, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVB, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_DWORD_FIELD(sdctl, XX_LODRVB, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVA, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_DWORD_FIELD(sdctl, XX_LODRVA, XX_SD_CTL_DRV_DEFAULT); + falcon_xmac_writel(efx, &sdctl, XX_SD_CTL_REG_MAC); + + EFX_POPULATE_DWORD_8(txdrv, + XX_DEQD, XX_TXDRV_DEQ_DEFAULT, + XX_DEQC, XX_TXDRV_DEQ_DEFAULT, + XX_DEQB, XX_TXDRV_DEQ_DEFAULT, + XX_DEQA, XX_TXDRV_DEQ_DEFAULT, + XX_DTXD, XX_TXDRV_DTX_DEFAULT, + XX_DTXC, XX_TXDRV_DTX_DEFAULT, + XX_DTXB, XX_TXDRV_DTX_DEFAULT, + XX_DTXA, XX_TXDRV_DTX_DEFAULT); + falcon_xmac_writel(efx, &txdrv, XX_TXDRV_CTL_REG_MAC); +} + +static void falcon_hold_xaui_in_rst(struct efx_nic *efx) +{ + efx_dword_t reg; + + EFX_ZERO_DWORD(reg); + EFX_SET_DWORD_FIELD(reg, XX_PWRDNA_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_PWRDNB_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_PWRDNC_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_PWRDND_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_RSTPLLAB_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_RSTPLLCD_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_RESETA_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_RESETB_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_RESETC_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_RESETD_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSRX_EN, 1); + EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSTX_EN, 1); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); +} + +static int _falcon_reset_xaui_a(struct efx_nic *efx) +{ + efx_dword_t reg; + + falcon_hold_xaui_in_rst(efx); + falcon_xmac_readl(efx, ®, XX_PWR_RST_REG_MAC); + + /* Follow the RAMBUS XAUI data reset sequencing + * Channels A and B first: power down, reset PLL, reset, clear + */ + EFX_SET_DWORD_FIELD(reg, XX_PWRDNA_EN, 0); + EFX_SET_DWORD_FIELD(reg, XX_PWRDNB_EN, 0); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + EFX_SET_DWORD_FIELD(reg, XX_RSTPLLAB_EN, 0); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + EFX_SET_DWORD_FIELD(reg, XX_RESETA_EN, 0); + EFX_SET_DWORD_FIELD(reg, XX_RESETB_EN, 0); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + /* Channels C and D: power down, reset PLL, reset, clear */ + EFX_SET_DWORD_FIELD(reg, XX_PWRDNC_EN, 0); + EFX_SET_DWORD_FIELD(reg, XX_PWRDND_EN, 0); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + EFX_SET_DWORD_FIELD(reg, XX_RSTPLLCD_EN, 0); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + EFX_SET_DWORD_FIELD(reg, XX_RESETC_EN, 0); + EFX_SET_DWORD_FIELD(reg, XX_RESETD_EN, 0); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + /* Setup XAUI */ + falcon_setup_xaui(efx); + udelay(10); + + /* Take XGXS out of reset */ + EFX_ZERO_DWORD(reg); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + return 0; +} + +static int _falcon_reset_xaui_b(struct efx_nic *efx) +{ + efx_dword_t reg; + int count; + + EFX_POPULATE_DWORD_1(reg, XX_RST_XX_EN, 1); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + + /* Give some time for the link to establish */ + for (count = 0; count < 1000; count++) { /* wait upto 10ms */ + falcon_xmac_readl(efx, ®, XX_PWR_RST_REG_MAC); + if (EFX_DWORD_FIELD(reg, XX_RST_XX_EN) == 0) { + falcon_setup_xaui(efx); + return 0; + } + udelay(10); + } + EFX_ERR(efx, "timed out waiting for XAUI/XGXS reset\n"); + return -ETIMEDOUT; +} + +int falcon_reset_xaui(struct efx_nic *efx) +{ + int rc; + + if (EFX_WORKAROUND_9388(efx)) { + falcon_hold_xaui_in_rst(efx); + efx->phy_op->reset_xaui(efx); + rc = _falcon_reset_xaui_a(efx); + } else { + rc = _falcon_reset_xaui_b(efx); + } + return rc; +} + +static int falcon_xgmii_status(struct efx_nic *efx) +{ + efx_dword_t reg; + + if (FALCON_REV(efx) < FALCON_REV_B0) + return 1; + + /* The ISR latches, so clear it and re-read */ + falcon_xmac_readl(efx, ®, XM_MGT_INT_REG_MAC_B0); + falcon_xmac_readl(efx, ®, XM_MGT_INT_REG_MAC_B0); + + if (EFX_DWORD_FIELD(reg, XM_LCLFLT) || + EFX_DWORD_FIELD(reg, XM_RMTFLT)) { + EFX_INFO(efx, "MGT_INT: "EFX_DWORD_FMT"\n", EFX_DWORD_VAL(reg)); + return 0; + } + + return 1; +} + +static void falcon_mask_status_intr(struct efx_nic *efx, int enable) +{ + efx_dword_t reg; + + if (FALCON_REV(efx) < FALCON_REV_B0) + return; + + /* Flush the ISR */ + if (enable) + falcon_xmac_readl(efx, ®, XM_MGT_INT_REG_MAC_B0); + + EFX_POPULATE_DWORD_2(reg, + XM_MSK_RMTFLT, !enable, + XM_MSK_LCLFLT, !enable); + falcon_xmac_writel(efx, ®, XM_MGT_INT_MSK_REG_MAC_B0); +} + +int falcon_init_xmac(struct efx_nic *efx) +{ + int rc; + + /* Initialize the PHY first so the clock is around */ + rc = efx->phy_op->init(efx); + if (rc) + goto fail1; + + rc = falcon_reset_xaui(efx); + if (rc) + goto fail2; + + /* Wait again. Give the PHY and MAC time to come back */ + schedule_timeout_uninterruptible(HZ / 10); + + rc = falcon_reset_xmac(efx); + if (rc) + goto fail2; + + falcon_mask_status_intr(efx, 1); + return 0; + + fail2: + efx->phy_op->fini(efx); + fail1: + return rc; +} + +int falcon_xaui_link_ok(struct efx_nic *efx) +{ + efx_dword_t reg; + int align_done, sync_status, link_ok = 0; + + /* Read link status */ + falcon_xmac_readl(efx, ®, XX_CORE_STAT_REG_MAC); + + align_done = EFX_DWORD_FIELD(reg, XX_ALIGN_DONE); + sync_status = EFX_DWORD_FIELD(reg, XX_SYNC_STAT); + if (align_done && (sync_status == XX_SYNC_STAT_DECODE_SYNCED)) + link_ok = 1; + + /* Clear link status ready for next read */ + EFX_SET_DWORD_FIELD(reg, XX_COMMA_DET, XX_COMMA_DET_RESET); + EFX_SET_DWORD_FIELD(reg, XX_CHARERR, XX_CHARERR_RESET); + EFX_SET_DWORD_FIELD(reg, XX_DISPERR, XX_DISPERR_RESET); + falcon_xmac_writel(efx, ®, XX_CORE_STAT_REG_MAC); + + /* If the link is up, then check the phy side of the xaui link + * (error conditions from the wire side propoagate back through + * the phy to the xaui side). */ + if (efx->link_up && link_ok) { + int has_phyxs = efx->phy_op->mmds & (1 << MDIO_MMD_PHYXS); + if (has_phyxs) + link_ok = mdio_clause45_phyxgxs_lane_sync(efx); + } + + /* If the PHY and XAUI links are up, then check the mac's xgmii + * fault state */ + if (efx->link_up && link_ok) + link_ok = falcon_xgmii_status(efx); + + return link_ok; +} + +static void falcon_reconfigure_xmac_core(struct efx_nic *efx) +{ + unsigned int max_frame_len; + efx_dword_t reg; + int rx_fc = (efx->flow_control & EFX_FC_RX) ? 1 : 0; + + /* Configure MAC - cut-thru mode is hard wired on */ + EFX_POPULATE_DWORD_3(reg, + XM_RX_JUMBO_MODE, 1, + XM_TX_STAT_EN, 1, + XM_RX_STAT_EN, 1); + falcon_xmac_writel(efx, ®, XM_GLB_CFG_REG_MAC); + + /* Configure TX */ + EFX_POPULATE_DWORD_6(reg, + XM_TXEN, 1, + XM_TX_PRMBL, 1, + XM_AUTO_PAD, 1, + XM_TXCRC, 1, + XM_FCNTL, 1, + XM_IPG, 0x3); + falcon_xmac_writel(efx, ®, XM_TX_CFG_REG_MAC); + + /* Configure RX */ + EFX_POPULATE_DWORD_5(reg, + XM_RXEN, 1, + XM_AUTO_DEPAD, 0, + XM_ACPT_ALL_MCAST, 1, + XM_ACPT_ALL_UCAST, efx->promiscuous, + XM_PASS_CRC_ERR, 1); + falcon_xmac_writel(efx, ®, XM_RX_CFG_REG_MAC); + + /* Set frame length */ + max_frame_len = EFX_MAX_FRAME_LEN(efx->net_dev->mtu); + EFX_POPULATE_DWORD_1(reg, XM_MAX_RX_FRM_SIZE, max_frame_len); + falcon_xmac_writel(efx, ®, XM_RX_PARAM_REG_MAC); + EFX_POPULATE_DWORD_2(reg, + XM_MAX_TX_FRM_SIZE, max_frame_len, + XM_TX_JUMBO_MODE, 1); + falcon_xmac_writel(efx, ®, XM_TX_PARAM_REG_MAC); + + EFX_POPULATE_DWORD_2(reg, + XM_PAUSE_TIME, 0xfffe, /* MAX PAUSE TIME */ + XM_DIS_FCNTL, rx_fc ? 0 : 1); + falcon_xmac_writel(efx, ®, XM_FC_REG_MAC); + + /* Set MAC address */ + EFX_POPULATE_DWORD_4(reg, + XM_ADR_0, efx->net_dev->dev_addr[0], + XM_ADR_1, efx->net_dev->dev_addr[1], + XM_ADR_2, efx->net_dev->dev_addr[2], + XM_ADR_3, efx->net_dev->dev_addr[3]); + falcon_xmac_writel(efx, ®, XM_ADR_LO_REG_MAC); + EFX_POPULATE_DWORD_2(reg, + XM_ADR_4, efx->net_dev->dev_addr[4], + XM_ADR_5, efx->net_dev->dev_addr[5]); + falcon_xmac_writel(efx, ®, XM_ADR_HI_REG_MAC); +} + +/* Try and bring the Falcon side of the Falcon-Phy XAUI link fails + * to come back up. Bash it until it comes back up */ +static int falcon_check_xaui_link_up(struct efx_nic *efx) +{ + int max_tries, tries; + tries = EFX_WORKAROUND_5147(efx) ? 5 : 1; + max_tries = tries; + + if (efx->phy_type == PHY_TYPE_NONE) + return 0; + + while (tries) { + if (falcon_xaui_link_ok(efx)) + return 1; + + EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n", + __func__, tries); + (void) falcon_reset_xaui(efx); + udelay(200); + tries--; + } + + EFX_ERR(efx, "Failed to bring XAUI link back up in %d tries!\n", + max_tries); + return 0; +} + +void falcon_reconfigure_xmac(struct efx_nic *efx) +{ + int xaui_link_ok; + + falcon_mask_status_intr(efx, 0); + + falcon_deconfigure_mac_wrapper(efx); + efx->phy_op->reconfigure(efx); + falcon_reconfigure_xmac_core(efx); + falcon_reconfigure_mac_wrapper(efx); + + /* Ensure XAUI link is up */ + xaui_link_ok = falcon_check_xaui_link_up(efx); + + if (xaui_link_ok && efx->link_up) + falcon_mask_status_intr(efx, 1); +} + +void falcon_fini_xmac(struct efx_nic *efx) +{ + /* Isolate the MAC - PHY */ + falcon_deconfigure_mac_wrapper(efx); + + /* Potentially power down the PHY */ + efx->phy_op->fini(efx); +} + +void falcon_update_stats_xmac(struct efx_nic *efx) +{ + struct efx_mac_stats *mac_stats = &efx->mac_stats; + int rc; + + rc = falcon_dma_stats(efx, XgDmaDone_offset); + if (rc) + return; + + /* Update MAC stats from DMAed values */ + FALCON_STAT(efx, XgRxOctets, rx_bytes); + FALCON_STAT(efx, XgRxOctetsOK, rx_good_bytes); + FALCON_STAT(efx, XgRxPkts, rx_packets); + FALCON_STAT(efx, XgRxPktsOK, rx_good); + FALCON_STAT(efx, XgRxBroadcastPkts, rx_broadcast); + FALCON_STAT(efx, XgRxMulticastPkts, rx_multicast); + FALCON_STAT(efx, XgRxUnicastPkts, rx_unicast); + FALCON_STAT(efx, XgRxUndersizePkts, rx_lt64); + FALCON_STAT(efx, XgRxOversizePkts, rx_gtjumbo); + FALCON_STAT(efx, XgRxJabberPkts, rx_bad_gtjumbo); + FALCON_STAT(efx, XgRxUndersizeFCSerrorPkts, rx_bad_lt64); + FALCON_STAT(efx, XgRxDropEvents, rx_overflow); + FALCON_STAT(efx, XgRxFCSerrorPkts, rx_bad); + FALCON_STAT(efx, XgRxAlignError, rx_align_error); + FALCON_STAT(efx, XgRxSymbolError, rx_symbol_error); + FALCON_STAT(efx, XgRxInternalMACError, rx_internal_error); + FALCON_STAT(efx, XgRxControlPkts, rx_control); + FALCON_STAT(efx, XgRxPausePkts, rx_pause); + FALCON_STAT(efx, XgRxPkts64Octets, rx_64); + FALCON_STAT(efx, XgRxPkts65to127Octets, rx_65_to_127); + FALCON_STAT(efx, XgRxPkts128to255Octets, rx_128_to_255); + FALCON_STAT(efx, XgRxPkts256to511Octets, rx_256_to_511); + FALCON_STAT(efx, XgRxPkts512to1023Octets, rx_512_to_1023); + FALCON_STAT(efx, XgRxPkts1024to15xxOctets, rx_1024_to_15xx); + FALCON_STAT(efx, XgRxPkts15xxtoMaxOctets, rx_15xx_to_jumbo); + FALCON_STAT(efx, XgRxLengthError, rx_length_error); + FALCON_STAT(efx, XgTxPkts, tx_packets); + FALCON_STAT(efx, XgTxOctets, tx_bytes); + FALCON_STAT(efx, XgTxMulticastPkts, tx_multicast); + FALCON_STAT(efx, XgTxBroadcastPkts, tx_broadcast); + FALCON_STAT(efx, XgTxUnicastPkts, tx_unicast); + FALCON_STAT(efx, XgTxControlPkts, tx_control); + FALCON_STAT(efx, XgTxPausePkts, tx_pause); + FALCON_STAT(efx, XgTxPkts64Octets, tx_64); + FALCON_STAT(efx, XgTxPkts65to127Octets, tx_65_to_127); + FALCON_STAT(efx, XgTxPkts128to255Octets, tx_128_to_255); + FALCON_STAT(efx, XgTxPkts256to511Octets, tx_256_to_511); + FALCON_STAT(efx, XgTxPkts512to1023Octets, tx_512_to_1023); + FALCON_STAT(efx, XgTxPkts1024to15xxOctets, tx_1024_to_15xx); + FALCON_STAT(efx, XgTxPkts1519toMaxOctets, tx_15xx_to_jumbo); + FALCON_STAT(efx, XgTxUndersizePkts, tx_lt64); + FALCON_STAT(efx, XgTxOversizePkts, tx_gtjumbo); + FALCON_STAT(efx, XgTxNonTcpUdpPkt, tx_non_tcpudp); + FALCON_STAT(efx, XgTxMacSrcErrPkt, tx_mac_src_error); + FALCON_STAT(efx, XgTxIpSrcErrPkt, tx_ip_src_error); + + /* Update derived statistics */ + mac_stats->tx_good_bytes = + (mac_stats->tx_bytes - mac_stats->tx_bad_bytes); + mac_stats->rx_bad_bytes = + (mac_stats->rx_bytes - mac_stats->rx_good_bytes); +} + +#define EFX_XAUI_RETRAIN_MAX 8 + +int falcon_check_xmac(struct efx_nic *efx) +{ + unsigned xaui_link_ok; + int rc; + + falcon_mask_status_intr(efx, 0); + xaui_link_ok = falcon_xaui_link_ok(efx); + + if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok) + (void) falcon_reset_xaui(efx); + + /* Call the PHY check_hw routine */ + rc = efx->phy_op->check_hw(efx); + + /* Unmask interrupt if everything was (and still is) ok */ + if (xaui_link_ok && efx->link_up) + falcon_mask_status_intr(efx, 1); + + return rc; +} + +/* Simulate a PHY event */ +void falcon_xmac_sim_phy_event(struct efx_nic *efx) +{ + efx_qword_t phy_event; + + EFX_POPULATE_QWORD_2(phy_event, + EV_CODE, GLOBAL_EV_DECODE, + XG_PHY_INTR, 1); + falcon_generate_event(&efx->channel[0], &phy_event); +} + +int falcon_xmac_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +{ + mdio_clause45_get_settings(efx, ecmd); + ecmd->transceiver = XCVR_INTERNAL; + ecmd->phy_address = efx->mii.phy_id; + ecmd->autoneg = AUTONEG_DISABLE; + ecmd->duplex = DUPLEX_FULL; + return 0; +} + +int falcon_xmac_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +{ + if (ecmd->transceiver != XCVR_INTERNAL) + return -EINVAL; + if (ecmd->autoneg != AUTONEG_DISABLE) + return -EINVAL; + if (ecmd->duplex != DUPLEX_FULL) + return -EINVAL; + + return mdio_clause45_set_settings(efx, ecmd); +} + + +int falcon_xmac_set_pause(struct efx_nic *efx, enum efx_fc_type flow_control) +{ + int reset; + + if (flow_control & EFX_FC_AUTO) { + EFX_LOG(efx, "10G does not support flow control " + "autonegotiation\n"); + return -EINVAL; + } + + if ((flow_control & EFX_FC_TX) && !(flow_control & EFX_FC_RX)) + return -EINVAL; + + /* TX flow control may automatically turn itself off if the + * link partner (intermittently) stops responding to pause + * frames. There isn't any indication that this has happened, + * so the best we do is leave it up to the user to spot this + * and fix it be cycling transmit flow control on this end. */ + reset = ((flow_control & EFX_FC_TX) && + !(efx->flow_control & EFX_FC_TX)); + if (EFX_WORKAROUND_11482(efx) && reset) { + if (FALCON_REV(efx) >= FALCON_REV_B0) { + /* Recover by resetting the EM block */ + if (efx->link_up) + falcon_drain_tx_fifo(efx); + } else { + /* Schedule a reset to recover */ + efx_schedule_reset(efx, RESET_TYPE_INVISIBLE); + } + } + + efx->flow_control = flow_control; + + return 0; +} diff --git a/drivers/net/sfc/gmii.h b/drivers/net/sfc/gmii.h new file mode 100644 index 000000000000..d25bbd1297f4 --- /dev/null +++ b/drivers/net/sfc/gmii.h @@ -0,0 +1,195 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_GMII_H +#define EFX_GMII_H + +/* + * GMII interface + */ + +#include <linux/mii.h> + +/* GMII registers, excluding registers already defined as MII + * registers in mii.h + */ +#define GMII_IER 0x12 /* Interrupt enable register */ +#define GMII_ISR 0x13 /* Interrupt status register */ + +/* Interrupt enable register */ +#define IER_ANEG_ERR 0x8000 /* Bit 15 - autonegotiation error */ +#define IER_SPEED_CHG 0x4000 /* Bit 14 - speed changed */ +#define IER_DUPLEX_CHG 0x2000 /* Bit 13 - duplex changed */ +#define IER_PAGE_RCVD 0x1000 /* Bit 12 - page received */ +#define IER_ANEG_DONE 0x0800 /* Bit 11 - autonegotiation complete */ +#define IER_LINK_CHG 0x0400 /* Bit 10 - link status changed */ +#define IER_SYM_ERR 0x0200 /* Bit 9 - symbol error */ +#define IER_FALSE_CARRIER 0x0100 /* Bit 8 - false carrier */ +#define IER_FIFO_ERR 0x0080 /* Bit 7 - FIFO over/underflow */ +#define IER_MDIX_CHG 0x0040 /* Bit 6 - MDI crossover changed */ +#define IER_DOWNSHIFT 0x0020 /* Bit 5 - downshift */ +#define IER_ENERGY 0x0010 /* Bit 4 - energy detect */ +#define IER_DTE_POWER 0x0004 /* Bit 2 - DTE power detect */ +#define IER_POLARITY_CHG 0x0002 /* Bit 1 - polarity changed */ +#define IER_JABBER 0x0001 /* Bit 0 - jabber */ + +/* Interrupt status register */ +#define ISR_ANEG_ERR 0x8000 /* Bit 15 - autonegotiation error */ +#define ISR_SPEED_CHG 0x4000 /* Bit 14 - speed changed */ +#define ISR_DUPLEX_CHG 0x2000 /* Bit 13 - duplex changed */ +#define ISR_PAGE_RCVD 0x1000 /* Bit 12 - page received */ +#define ISR_ANEG_DONE 0x0800 /* Bit 11 - autonegotiation complete */ +#define ISR_LINK_CHG 0x0400 /* Bit 10 - link status changed */ +#define ISR_SYM_ERR 0x0200 /* Bit 9 - symbol error */ +#define ISR_FALSE_CARRIER 0x0100 /* Bit 8 - false carrier */ +#define ISR_FIFO_ERR 0x0080 /* Bit 7 - FIFO over/underflow */ +#define ISR_MDIX_CHG 0x0040 /* Bit 6 - MDI crossover changed */ +#define ISR_DOWNSHIFT 0x0020 /* Bit 5 - downshift */ +#define ISR_ENERGY 0x0010 /* Bit 4 - energy detect */ +#define ISR_DTE_POWER 0x0004 /* Bit 2 - DTE power detect */ +#define ISR_POLARITY_CHG 0x0002 /* Bit 1 - polarity changed */ +#define ISR_JABBER 0x0001 /* Bit 0 - jabber */ + +/* Logically extended advertisement register */ +#define GM_ADVERTISE_SLCT ADVERTISE_SLCT +#define GM_ADVERTISE_CSMA ADVERTISE_CSMA +#define GM_ADVERTISE_10HALF ADVERTISE_10HALF +#define GM_ADVERTISE_1000XFULL ADVERTISE_1000XFULL +#define GM_ADVERTISE_10FULL ADVERTISE_10FULL +#define GM_ADVERTISE_1000XHALF ADVERTISE_1000XHALF +#define GM_ADVERTISE_100HALF ADVERTISE_100HALF +#define GM_ADVERTISE_1000XPAUSE ADVERTISE_1000XPAUSE +#define GM_ADVERTISE_100FULL ADVERTISE_100FULL +#define GM_ADVERTISE_1000XPSE_ASYM ADVERTISE_1000XPSE_ASYM +#define GM_ADVERTISE_100BASE4 ADVERTISE_100BASE4 +#define GM_ADVERTISE_PAUSE_CAP ADVERTISE_PAUSE_CAP +#define GM_ADVERTISE_PAUSE_ASYM ADVERTISE_PAUSE_ASYM +#define GM_ADVERTISE_RESV ADVERTISE_RESV +#define GM_ADVERTISE_RFAULT ADVERTISE_RFAULT +#define GM_ADVERTISE_LPACK ADVERTISE_LPACK +#define GM_ADVERTISE_NPAGE ADVERTISE_NPAGE +#define GM_ADVERTISE_1000FULL (ADVERTISE_1000FULL << 8) +#define GM_ADVERTISE_1000HALF (ADVERTISE_1000HALF << 8) +#define GM_ADVERTISE_1000 (GM_ADVERTISE_1000FULL | \ + GM_ADVERTISE_1000HALF) +#define GM_ADVERTISE_FULL (GM_ADVERTISE_1000FULL | \ + ADVERTISE_FULL) +#define GM_ADVERTISE_ALL (GM_ADVERTISE_1000FULL | \ + GM_ADVERTISE_1000HALF | \ + ADVERTISE_ALL) + +/* Logically extended link partner ability register */ +#define GM_LPA_SLCT LPA_SLCT +#define GM_LPA_10HALF LPA_10HALF +#define GM_LPA_1000XFULL LPA_1000XFULL +#define GM_LPA_10FULL LPA_10FULL +#define GM_LPA_1000XHALF LPA_1000XHALF +#define GM_LPA_100HALF LPA_100HALF +#define GM_LPA_1000XPAUSE LPA_1000XPAUSE +#define GM_LPA_100FULL LPA_100FULL +#define GM_LPA_1000XPAUSE_ASYM LPA_1000XPAUSE_ASYM +#define GM_LPA_100BASE4 LPA_100BASE4 +#define GM_LPA_PAUSE_CAP LPA_PAUSE_CAP +#define GM_LPA_PAUSE_ASYM LPA_PAUSE_ASYM +#define GM_LPA_RESV LPA_RESV +#define GM_LPA_RFAULT LPA_RFAULT +#define GM_LPA_LPACK LPA_LPACK +#define GM_LPA_NPAGE LPA_NPAGE +#define GM_LPA_1000FULL (LPA_1000FULL << 6) +#define GM_LPA_1000HALF (LPA_1000HALF << 6) +#define GM_LPA_10000FULL 0x00040000 +#define GM_LPA_10000HALF 0x00080000 +#define GM_LPA_DUPLEX (GM_LPA_1000FULL | GM_LPA_10000FULL \ + | LPA_DUPLEX) +#define GM_LPA_10 (LPA_10FULL | LPA_10HALF) +#define GM_LPA_100 LPA_100 +#define GM_LPA_1000 (GM_LPA_1000FULL | GM_LPA_1000HALF) +#define GM_LPA_10000 (GM_LPA_10000FULL | GM_LPA_10000HALF) + +/* Retrieve GMII autonegotiation advertised abilities + * + * The MII advertisment register (MII_ADVERTISE) is logically extended + * to include advertisement bits ADVERTISE_1000FULL and + * ADVERTISE_1000HALF from MII_CTRL1000. The result can be tested + * against the GM_ADVERTISE_xxx constants. + */ +static inline unsigned int gmii_advertised(struct mii_if_info *gmii) +{ + unsigned int advertise; + unsigned int ctrl1000; + + advertise = gmii->mdio_read(gmii->dev, gmii->phy_id, MII_ADVERTISE); + ctrl1000 = gmii->mdio_read(gmii->dev, gmii->phy_id, MII_CTRL1000); + return (((ctrl1000 << 8) & GM_ADVERTISE_1000) | advertise); +} + +/* Retrieve GMII autonegotiation link partner abilities + * + * The MII link partner ability register (MII_LPA) is logically + * extended by adding bits LPA_1000HALF and LPA_1000FULL from + * MII_STAT1000. The result can be tested against the GM_LPA_xxx + * constants. + */ +static inline unsigned int gmii_lpa(struct mii_if_info *gmii) +{ + unsigned int lpa; + unsigned int stat1000; + + lpa = gmii->mdio_read(gmii->dev, gmii->phy_id, MII_LPA); + stat1000 = gmii->mdio_read(gmii->dev, gmii->phy_id, MII_STAT1000); + return (((stat1000 << 6) & GM_LPA_1000) | lpa); +} + +/* Calculate GMII autonegotiated link technology + * + * "negotiated" should be the result of gmii_advertised() logically + * ANDed with the result of gmii_lpa(). + * + * "tech" will be negotiated with the unused bits masked out. For + * example, if both ends of the link are capable of both + * GM_LPA_1000FULL and GM_LPA_100FULL, GM_LPA_100FULL will be masked + * out. + */ +static inline unsigned int gmii_nway_result(unsigned int negotiated) +{ + unsigned int other_bits; + + /* Mask out the speed and duplexity bits */ + other_bits = negotiated & ~(GM_LPA_10 | GM_LPA_100 | GM_LPA_1000); + + if (negotiated & GM_LPA_1000FULL) + return (other_bits | GM_LPA_1000FULL); + else if (negotiated & GM_LPA_1000HALF) + return (other_bits | GM_LPA_1000HALF); + else + return (other_bits | mii_nway_result(negotiated)); +} + +/* Calculate GMII non-autonegotiated link technology + * + * This provides an equivalent to gmii_nway_result for the case when + * autonegotiation is disabled. + */ +static inline unsigned int gmii_forced_result(unsigned int bmcr) +{ + unsigned int result; + int full_duplex; + + full_duplex = bmcr & BMCR_FULLDPLX; + if (bmcr & BMCR_SPEED1000) + result = full_duplex ? GM_LPA_1000FULL : GM_LPA_1000HALF; + else if (bmcr & BMCR_SPEED100) + result = full_duplex ? GM_LPA_100FULL : GM_LPA_100HALF; + else + result = full_duplex ? GM_LPA_10FULL : GM_LPA_10HALF; + return result; +} + +#endif /* EFX_GMII_H */ diff --git a/drivers/net/sfc/i2c-direct.c b/drivers/net/sfc/i2c-direct.c new file mode 100644 index 000000000000..b6c62d0ed9c2 --- /dev/null +++ b/drivers/net/sfc/i2c-direct.c @@ -0,0 +1,381 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/delay.h> +#include "net_driver.h" +#include "i2c-direct.h" + +/* + * I2C data (SDA) and clock (SCL) line read/writes with appropriate + * delays. + */ + +static inline void setsda(struct efx_i2c_interface *i2c, int state) +{ + udelay(i2c->op->udelay); + i2c->sda = state; + i2c->op->setsda(i2c); + udelay(i2c->op->udelay); +} + +static inline void setscl(struct efx_i2c_interface *i2c, int state) +{ + udelay(i2c->op->udelay); + i2c->scl = state; + i2c->op->setscl(i2c); + udelay(i2c->op->udelay); +} + +static inline int getsda(struct efx_i2c_interface *i2c) +{ + int sda; + + udelay(i2c->op->udelay); + sda = i2c->op->getsda(i2c); + udelay(i2c->op->udelay); + return sda; +} + +static inline int getscl(struct efx_i2c_interface *i2c) +{ + int scl; + + udelay(i2c->op->udelay); + scl = i2c->op->getscl(i2c); + udelay(i2c->op->udelay); + return scl; +} + +/* + * I2C low-level protocol operations + * + */ + +static inline void i2c_release(struct efx_i2c_interface *i2c) +{ + EFX_WARN_ON_PARANOID(!i2c->scl); + EFX_WARN_ON_PARANOID(!i2c->sda); + /* Devices may time out if operations do not end */ + setscl(i2c, 1); + setsda(i2c, 1); + EFX_BUG_ON_PARANOID(getsda(i2c) != 1); + EFX_BUG_ON_PARANOID(getscl(i2c) != 1); +} + +static inline void i2c_start(struct efx_i2c_interface *i2c) +{ + /* We may be restarting immediately after a {send,recv}_bit, + * so SCL will not necessarily already be high. + */ + EFX_WARN_ON_PARANOID(!i2c->sda); + setscl(i2c, 1); + setsda(i2c, 0); + setscl(i2c, 0); + setsda(i2c, 1); +} + +static inline void i2c_send_bit(struct efx_i2c_interface *i2c, int bit) +{ + EFX_WARN_ON_PARANOID(i2c->scl != 0); + setsda(i2c, bit); + setscl(i2c, 1); + setscl(i2c, 0); + setsda(i2c, 1); +} + +static inline int i2c_recv_bit(struct efx_i2c_interface *i2c) +{ + int bit; + + EFX_WARN_ON_PARANOID(i2c->scl != 0); + EFX_WARN_ON_PARANOID(!i2c->sda); + setscl(i2c, 1); + bit = getsda(i2c); + setscl(i2c, 0); + return bit; +} + +static inline void i2c_stop(struct efx_i2c_interface *i2c) +{ + EFX_WARN_ON_PARANOID(i2c->scl != 0); + setsda(i2c, 0); + setscl(i2c, 1); + setsda(i2c, 1); +} + +/* + * I2C mid-level protocol operations + * + */ + +/* Sends a byte via the I2C bus and checks for an acknowledgement from + * the slave device. + */ +static int i2c_send_byte(struct efx_i2c_interface *i2c, u8 byte) +{ + int i; + + /* Send byte */ + for (i = 0; i < 8; i++) { + i2c_send_bit(i2c, !!(byte & 0x80)); + byte <<= 1; + } + + /* Check for acknowledgement from slave */ + return (i2c_recv_bit(i2c) == 0 ? 0 : -EIO); +} + +/* Receives a byte via the I2C bus and sends ACK/NACK to the slave device. */ +static u8 i2c_recv_byte(struct efx_i2c_interface *i2c, int ack) +{ + u8 value = 0; + int i; + + /* Receive byte */ + for (i = 0; i < 8; i++) + value = (value << 1) | i2c_recv_bit(i2c); + + /* Send ACK/NACK */ + i2c_send_bit(i2c, (ack ? 0 : 1)); + + return value; +} + +/* Calculate command byte for a read operation */ +static inline u8 i2c_read_cmd(u8 device_id) +{ + return ((device_id << 1) | 1); +} + +/* Calculate command byte for a write operation */ +static inline u8 i2c_write_cmd(u8 device_id) +{ + return ((device_id << 1) | 0); +} + +int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id) +{ + int rc; + + /* If someone is driving the bus low we just give up. */ + if (getsda(i2c) == 0 || getscl(i2c) == 0) { + EFX_ERR(i2c->efx, "%s someone is holding the I2C bus low." + " Giving up.\n", __func__); + return -EFAULT; + } + + /* Pretend to initiate a device write */ + i2c_start(i2c); + rc = i2c_send_byte(i2c, i2c_write_cmd(device_id)); + if (rc) + goto out; + + out: + i2c_stop(i2c); + i2c_release(i2c); + + return rc; +} + +/* This performs a fast read of one or more consecutive bytes from an + * I2C device. Not all devices support consecutive reads of more than + * one byte; for these devices use efx_i2c_read() instead. + */ +int efx_i2c_fast_read(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, u8 *data, unsigned int len) +{ + int i; + int rc; + + EFX_WARN_ON_PARANOID(getsda(i2c) != 1); + EFX_WARN_ON_PARANOID(getscl(i2c) != 1); + EFX_WARN_ON_PARANOID(data == NULL); + EFX_WARN_ON_PARANOID(len < 1); + + /* Select device and starting offset */ + i2c_start(i2c); + rc = i2c_send_byte(i2c, i2c_write_cmd(device_id)); + if (rc) + goto out; + rc = i2c_send_byte(i2c, offset); + if (rc) + goto out; + + /* Read data from device */ + i2c_start(i2c); + rc = i2c_send_byte(i2c, i2c_read_cmd(device_id)); + if (rc) + goto out; + for (i = 0; i < (len - 1); i++) + /* Read and acknowledge all but the last byte */ + data[i] = i2c_recv_byte(i2c, 1); + /* Read last byte with no acknowledgement */ + data[i] = i2c_recv_byte(i2c, 0); + + out: + i2c_stop(i2c); + i2c_release(i2c); + + return rc; +} + +/* This performs a fast write of one or more consecutive bytes to an + * I2C device. Not all devices support consecutive writes of more + * than one byte; for these devices use efx_i2c_write() instead. + */ +int efx_i2c_fast_write(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, + const u8 *data, unsigned int len) +{ + int i; + int rc; + + EFX_WARN_ON_PARANOID(getsda(i2c) != 1); + EFX_WARN_ON_PARANOID(getscl(i2c) != 1); + EFX_WARN_ON_PARANOID(len < 1); + + /* Select device and starting offset */ + i2c_start(i2c); + rc = i2c_send_byte(i2c, i2c_write_cmd(device_id)); + if (rc) + goto out; + rc = i2c_send_byte(i2c, offset); + if (rc) + goto out; + + /* Write data to device */ + for (i = 0; i < len; i++) { + rc = i2c_send_byte(i2c, data[i]); + if (rc) + goto out; + } + + out: + i2c_stop(i2c); + i2c_release(i2c); + + return rc; +} + +/* I2C byte-by-byte read */ +int efx_i2c_read(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, u8 *data, unsigned int len) +{ + int rc; + + /* i2c_fast_read with length 1 is a single byte read */ + for (; len > 0; offset++, data++, len--) { + rc = efx_i2c_fast_read(i2c, device_id, offset, data, 1); + if (rc) + return rc; + } + + return 0; +} + +/* I2C byte-by-byte write */ +int efx_i2c_write(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, const u8 *data, unsigned int len) +{ + int rc; + + /* i2c_fast_write with length 1 is a single byte write */ + for (; len > 0; offset++, data++, len--) { + rc = efx_i2c_fast_write(i2c, device_id, offset, data, 1); + if (rc) + return rc; + mdelay(i2c->op->mdelay); + } + + return 0; +} + + +/* This is just a slightly neater wrapper round efx_i2c_fast_write + * in the case where the target doesn't take an offset + */ +int efx_i2c_send_bytes(struct efx_i2c_interface *i2c, + u8 device_id, const u8 *data, unsigned int len) +{ + return efx_i2c_fast_write(i2c, device_id, data[0], data + 1, len - 1); +} + +/* I2C receiving of bytes - does not send an offset byte */ +int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id, + u8 *bytes, unsigned int len) +{ + int i; + int rc; + + EFX_WARN_ON_PARANOID(getsda(i2c) != 1); + EFX_WARN_ON_PARANOID(getscl(i2c) != 1); + EFX_WARN_ON_PARANOID(len < 1); + + /* Select device */ + i2c_start(i2c); + + /* Read data from device */ + rc = i2c_send_byte(i2c, i2c_read_cmd(device_id)); + if (rc) + goto out; + + for (i = 0; i < (len - 1); i++) + /* Read and acknowledge all but the last byte */ + bytes[i] = i2c_recv_byte(i2c, 1); + /* Read last byte with no acknowledgement */ + bytes[i] = i2c_recv_byte(i2c, 0); + + out: + i2c_stop(i2c); + i2c_release(i2c); + + return rc; +} + +/* SMBus and some I2C devices will time out if the I2C clock is + * held low for too long. This is most likely to happen in virtualised + * systems (when the entire domain is descheduled) but could in + * principle happen due to preemption on any busy system (and given the + * potential length of an I2C operation turning preemption off is not + * a sensible option). The following functions deal with the failure by + * retrying up to a fixed number of times. + */ + +#define I2C_MAX_RETRIES (10) + +/* The timeout problem will result in -EIO. If the wrapped function + * returns any other error, pass this up and do not retry. */ +#define RETRY_WRAPPER(_f) \ + int retries = I2C_MAX_RETRIES; \ + int rc; \ + while (retries) { \ + rc = _f; \ + if (rc != -EIO) \ + return rc; \ + retries--; \ + } \ + return rc; \ + +int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c, u8 device_id) +{ + RETRY_WRAPPER(efx_i2c_check_presence(i2c, device_id)) +} + +int efx_i2c_read_retry(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, u8 *data, unsigned int len) +{ + RETRY_WRAPPER(efx_i2c_read(i2c, device_id, offset, data, len)) +} + +int efx_i2c_write_retry(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, const u8 *data, unsigned int len) +{ + RETRY_WRAPPER(efx_i2c_write(i2c, device_id, offset, data, len)) +} diff --git a/drivers/net/sfc/i2c-direct.h b/drivers/net/sfc/i2c-direct.h new file mode 100644 index 000000000000..291e561071f5 --- /dev/null +++ b/drivers/net/sfc/i2c-direct.h @@ -0,0 +1,91 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005 Fen Systems Ltd. + * Copyright 2006 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_I2C_DIRECT_H +#define EFX_I2C_DIRECT_H + +#include "net_driver.h" + +/* + * Direct control of an I2C bus + */ + +struct efx_i2c_interface; + +/** + * struct efx_i2c_bit_operations - I2C bus direct control methods + * + * I2C bus direct control methods. + * + * @setsda: Set state of SDA line + * @setscl: Set state of SCL line + * @getsda: Get state of SDA line + * @getscl: Get state of SCL line + * @udelay: Delay between each bit operation + * @mdelay: Delay between each byte write + */ +struct efx_i2c_bit_operations { + void (*setsda) (struct efx_i2c_interface *i2c); + void (*setscl) (struct efx_i2c_interface *i2c); + int (*getsda) (struct efx_i2c_interface *i2c); + int (*getscl) (struct efx_i2c_interface *i2c); + unsigned int udelay; + unsigned int mdelay; +}; + +/** + * struct efx_i2c_interface - an I2C interface + * + * An I2C interface. + * + * @efx: Attached Efx NIC + * @op: I2C bus control methods + * @sda: Current output state of SDA line + * @scl: Current output state of SCL line + */ +struct efx_i2c_interface { + struct efx_nic *efx; + struct efx_i2c_bit_operations *op; + unsigned int sda:1; + unsigned int scl:1; +}; + +extern int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id); +extern int efx_i2c_fast_read(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, + u8 *data, unsigned int len); +extern int efx_i2c_fast_write(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, + const u8 *data, unsigned int len); +extern int efx_i2c_read(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, u8 *data, unsigned int len); +extern int efx_i2c_write(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, + const u8 *data, unsigned int len); + +extern int efx_i2c_send_bytes(struct efx_i2c_interface *i2c, u8 device_id, + const u8 *bytes, unsigned int len); + +extern int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id, + u8 *bytes, unsigned int len); + + +/* Versions of the API that retry on failure. */ +extern int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c, + u8 device_id); + +extern int efx_i2c_read_retry(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, u8 *data, unsigned int len); + +extern int efx_i2c_write_retry(struct efx_i2c_interface *i2c, + u8 device_id, u8 offset, + const u8 *data, unsigned int len); + +#endif /* EFX_I2C_DIRECT_H */ diff --git a/drivers/net/sfc/mac.h b/drivers/net/sfc/mac.h new file mode 100644 index 000000000000..edd07d4dee18 --- /dev/null +++ b/drivers/net/sfc/mac.h @@ -0,0 +1,33 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2006-2007 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_MAC_H +#define EFX_MAC_H + +#include "net_driver.h" + +extern void falcon_xmac_writel(struct efx_nic *efx, + efx_dword_t *value, unsigned int mac_reg); +extern void falcon_xmac_readl(struct efx_nic *efx, + efx_dword_t *value, unsigned int mac_reg); +extern int falcon_init_xmac(struct efx_nic *efx); +extern void falcon_reconfigure_xmac(struct efx_nic *efx); +extern void falcon_update_stats_xmac(struct efx_nic *efx); +extern void falcon_fini_xmac(struct efx_nic *efx); +extern int falcon_check_xmac(struct efx_nic *efx); +extern void falcon_xmac_sim_phy_event(struct efx_nic *efx); +extern int falcon_xmac_get_settings(struct efx_nic *efx, + struct ethtool_cmd *ecmd); +extern int falcon_xmac_set_settings(struct efx_nic *efx, + struct ethtool_cmd *ecmd); +extern int falcon_xmac_set_pause(struct efx_nic *efx, + enum efx_fc_type pause_params); + +#endif diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c new file mode 100644 index 000000000000..dc06bb0aa575 --- /dev/null +++ b/drivers/net/sfc/mdio_10g.c @@ -0,0 +1,282 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ +/* + * Useful functions for working with MDIO clause 45 PHYs + */ +#include <linux/types.h> +#include <linux/ethtool.h> +#include <linux/delay.h> +#include "net_driver.h" +#include "mdio_10g.h" +#include "boards.h" + +int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd, + int spins, int spintime) +{ + u32 ctrl; + int phy_id = port->mii.phy_id; + + /* Catch callers passing values in the wrong units (or just silly) */ + EFX_BUG_ON_PARANOID(spins * spintime >= 5000); + + mdio_clause45_write(port, phy_id, mmd, MDIO_MMDREG_CTRL1, + (1 << MDIO_MMDREG_CTRL1_RESET_LBN)); + /* Wait for the reset bit to clear. */ + do { + msleep(spintime); + ctrl = mdio_clause45_read(port, phy_id, mmd, MDIO_MMDREG_CTRL1); + spins--; + + } while (spins && (ctrl & (1 << MDIO_MMDREG_CTRL1_RESET_LBN))); + + return spins ? spins : -ETIMEDOUT; +} + +static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd, + int fault_fatal) +{ + int status; + int phy_id = efx->mii.phy_id; + + /* Read MMD STATUS2 to check it is responding. */ + status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT2); + if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) & + ((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) != + MDIO_MMDREG_STAT2_PRESENT_VAL) { + EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd); + return -EIO; + } + + /* Read MMD STATUS 1 to check for fault. */ + status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1); + if ((status & (1 << MDIO_MMDREG_STAT1_FAULT_LBN)) != 0) { + if (fault_fatal) { + EFX_ERR(efx, "PHY MMD %d reporting fatal" + " fault: status %x\n", mmd, status); + return -EIO; + } else { + EFX_LOG(efx, "PHY MMD %d reporting status" + " %x (expected)\n", mmd, status); + } + } + return 0; +} + +/* This ought to be ridiculous overkill. We expect it to fail rarely */ +#define MDIO45_RESET_TIME 1000 /* ms */ +#define MDIO45_RESET_ITERS 100 + +int mdio_clause45_wait_reset_mmds(struct efx_nic *efx, + unsigned int mmd_mask) +{ + const int spintime = MDIO45_RESET_TIME / MDIO45_RESET_ITERS; + int tries = MDIO45_RESET_ITERS; + int rc = 0; + int in_reset; + + while (tries) { + int mask = mmd_mask; + int mmd = 0; + int stat; + in_reset = 0; + while (mask) { + if (mask & 1) { + stat = mdio_clause45_read(efx, + efx->mii.phy_id, + mmd, + MDIO_MMDREG_CTRL1); + if (stat < 0) { + EFX_ERR(efx, "failed to read status of" + " MMD %d\n", mmd); + return -EIO; + } + if (stat & (1 << MDIO_MMDREG_CTRL1_RESET_LBN)) + in_reset |= (1 << mmd); + } + mask = mask >> 1; + mmd++; + } + if (!in_reset) + break; + tries--; + msleep(spintime); + } + if (in_reset != 0) { + EFX_ERR(efx, "not all MMDs came out of reset in time." + " MMDs still in reset: %x\n", in_reset); + rc = -ETIMEDOUT; + } + return rc; +} + +int mdio_clause45_check_mmds(struct efx_nic *efx, + unsigned int mmd_mask, unsigned int fatal_mask) +{ + int devices, mmd = 0; + int probe_mmd; + + /* Historically we have probed the PHYXS to find out what devices are + * present,but that doesn't work so well if the PHYXS isn't expected + * to exist, if so just find the first item in the list supplied. */ + probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS0_PHYXS) ? MDIO_MMD_PHYXS : + __ffs(mmd_mask); + devices = mdio_clause45_read(efx, efx->mii.phy_id, + probe_mmd, MDIO_MMDREG_DEVS0); + + /* Check all the expected MMDs are present */ + if (devices < 0) { + EFX_ERR(efx, "failed to read devices present\n"); + return -EIO; + } + if ((devices & mmd_mask) != mmd_mask) { + EFX_ERR(efx, "required MMDs not present: got %x, " + "wanted %x\n", devices, mmd_mask); + return -ENODEV; + } + EFX_TRACE(efx, "Devices present: %x\n", devices); + + /* Check all required MMDs are responding and happy. */ + while (mmd_mask) { + if (mmd_mask & 1) { + int fault_fatal = fatal_mask & 1; + if (mdio_clause45_check_mmd(efx, mmd, fault_fatal)) + return -EIO; + } + mmd_mask = mmd_mask >> 1; + fatal_mask = fatal_mask >> 1; + mmd++; + } + + return 0; +} + +int mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) +{ + int phy_id = efx->mii.phy_id; + int status; + int ok = 1; + int mmd = 0; + int good; + + while (mmd_mask) { + if (mmd_mask & 1) { + /* Double reads because link state is latched, and a + * read moves the current state into the register */ + status = mdio_clause45_read(efx, phy_id, + mmd, MDIO_MMDREG_STAT1); + status = mdio_clause45_read(efx, phy_id, + mmd, MDIO_MMDREG_STAT1); + + good = status & (1 << MDIO_MMDREG_STAT1_LINK_LBN); + ok = ok && good; + } + mmd_mask = (mmd_mask >> 1); + mmd++; + } + return ok; +} + +/** + * mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO. + * @efx: Efx NIC + * @ecmd: Buffer for settings + * + * On return the 'port', 'speed', 'supported' and 'advertising' fields of + * ecmd have been filled out based on the PMA type. + */ +void mdio_clause45_get_settings(struct efx_nic *efx, + struct ethtool_cmd *ecmd) +{ + int pma_type; + + /* If no PMA is present we are presumably talking something XAUI-ish + * like CX4. Which we report as FIBRE (see below) */ + if ((efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)) == 0) { + ecmd->speed = SPEED_10000; + ecmd->port = PORT_FIBRE; + ecmd->supported = SUPPORTED_FIBRE; + ecmd->advertising = ADVERTISED_FIBRE; + return; + } + + pma_type = mdio_clause45_read(efx, efx->mii.phy_id, + MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL2); + pma_type &= MDIO_PMAPMD_CTRL2_TYPE_MASK; + + switch (pma_type) { + /* We represent CX4 as fibre in the absence of anything + better. */ + case MDIO_PMAPMD_CTRL2_10G_CX4: + ecmd->speed = SPEED_10000; + ecmd->port = PORT_FIBRE; + ecmd->supported = SUPPORTED_FIBRE; + ecmd->advertising = ADVERTISED_FIBRE; + break; + /* 10G Base-T */ + case MDIO_PMAPMD_CTRL2_10G_BT: + ecmd->speed = SPEED_10000; + ecmd->port = PORT_TP; + ecmd->supported = SUPPORTED_TP | SUPPORTED_10000baseT_Full; + ecmd->advertising = (ADVERTISED_FIBRE + | ADVERTISED_10000baseT_Full); + break; + case MDIO_PMAPMD_CTRL2_1G_BT: + ecmd->speed = SPEED_1000; + ecmd->port = PORT_TP; + ecmd->supported = SUPPORTED_TP | SUPPORTED_1000baseT_Full; + ecmd->advertising = (ADVERTISED_FIBRE + | ADVERTISED_1000baseT_Full); + break; + case MDIO_PMAPMD_CTRL2_100_BT: + ecmd->speed = SPEED_100; + ecmd->port = PORT_TP; + ecmd->supported = SUPPORTED_TP | SUPPORTED_100baseT_Full; + ecmd->advertising = (ADVERTISED_FIBRE + | ADVERTISED_100baseT_Full); + break; + case MDIO_PMAPMD_CTRL2_10_BT: + ecmd->speed = SPEED_10; + ecmd->port = PORT_TP; + ecmd->supported = SUPPORTED_TP | SUPPORTED_10baseT_Full; + ecmd->advertising = ADVERTISED_FIBRE | ADVERTISED_10baseT_Full; + break; + /* All the other defined modes are flavours of + * 10G optical */ + default: + ecmd->speed = SPEED_10000; + ecmd->port = PORT_FIBRE; + ecmd->supported = SUPPORTED_FIBRE; + ecmd->advertising = ADVERTISED_FIBRE; + break; + } +} + +/** + * mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO. + * @efx: Efx NIC + * @ecmd: New settings + * + * Currently this just enforces that we are _not_ changing the + * 'port', 'speed', 'supported' or 'advertising' settings as these + * cannot be changed on any currently supported PHY. + */ +int mdio_clause45_set_settings(struct efx_nic *efx, + struct ethtool_cmd *ecmd) +{ + struct ethtool_cmd tmpcmd; + mdio_clause45_get_settings(efx, &tmpcmd); + /* None of the current PHYs support more than one mode + * of operation (and only 10GBT ever will), so keep things + * simple for now */ + if ((ecmd->speed == tmpcmd.speed) && (ecmd->port == tmpcmd.port) && + (ecmd->supported == tmpcmd.supported) && + (ecmd->advertising == tmpcmd.advertising)) + return 0; + return -EOPNOTSUPP; +} diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h new file mode 100644 index 000000000000..2214b6d820a7 --- /dev/null +++ b/drivers/net/sfc/mdio_10g.h @@ -0,0 +1,232 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_MDIO_10G_H +#define EFX_MDIO_10G_H + +/* + * Definitions needed for doing 10G MDIO as specified in clause 45 + * MDIO, which do not appear in Linux yet. Also some helper functions. + */ + +#include "efx.h" +#include "boards.h" + +/* Numbering of the MDIO Manageable Devices (MMDs) */ +/* Physical Medium Attachment/ Physical Medium Dependent sublayer */ +#define MDIO_MMD_PMAPMD (1) +/* WAN Interface Sublayer */ +#define MDIO_MMD_WIS (2) +/* Physical Coding Sublayer */ +#define MDIO_MMD_PCS (3) +/* PHY Extender Sublayer */ +#define MDIO_MMD_PHYXS (4) +/* Extender Sublayer */ +#define MDIO_MMD_DTEXS (5) +/* Transmission convergence */ +#define MDIO_MMD_TC (6) +/* Auto negotiation */ +#define MDIO_MMD_AN (7) + +/* Generic register locations */ +#define MDIO_MMDREG_CTRL1 (0) +#define MDIO_MMDREG_STAT1 (1) +#define MDIO_MMDREG_IDHI (2) +#define MDIO_MMDREG_IDLOW (3) +#define MDIO_MMDREG_SPEED (4) +#define MDIO_MMDREG_DEVS0 (5) +#define MDIO_MMDREG_DEVS1 (6) +#define MDIO_MMDREG_CTRL2 (7) +#define MDIO_MMDREG_STAT2 (8) + +/* Bits in MMDREG_CTRL1 */ +/* Reset */ +#define MDIO_MMDREG_CTRL1_RESET_LBN (15) +#define MDIO_MMDREG_CTRL1_RESET_WIDTH (1) + +/* Bits in MMDREG_STAT1 */ +#define MDIO_MMDREG_STAT1_FAULT_LBN (7) +#define MDIO_MMDREG_STAT1_FAULT_WIDTH (1) +/* Link state */ +#define MDIO_MMDREG_STAT1_LINK_LBN (2) +#define MDIO_MMDREG_STAT1_LINK_WIDTH (1) + +/* Bits in ID reg */ +#define MDIO_ID_REV(_id32) (_id32 & 0xf) +#define MDIO_ID_MODEL(_id32) ((_id32 >> 4) & 0x3f) +#define MDIO_ID_OUI(_id32) (_id32 >> 10) + +/* Bits in MMDREG_DEVS0. Someone thoughtfully layed things out + * so the 'bit present' bit number of an MMD is the number of + * that MMD */ +#define DEV_PRESENT_BIT(_b) (1 << _b) + +#define MDIO_MMDREG_DEVS0_PHYXS DEV_PRESENT_BIT(MDIO_MMD_PHYXS) +#define MDIO_MMDREG_DEVS0_PCS DEV_PRESENT_BIT(MDIO_MMD_PCS) +#define MDIO_MMDREG_DEVS0_PMAPMD DEV_PRESENT_BIT(MDIO_MMD_PMAPMD) + +/* Bits in MMDREG_STAT2 */ +#define MDIO_MMDREG_STAT2_PRESENT_VAL (2) +#define MDIO_MMDREG_STAT2_PRESENT_LBN (14) +#define MDIO_MMDREG_STAT2_PRESENT_WIDTH (2) + +/* PMA type (4 bits) */ +#define MDIO_PMAPMD_CTRL2_10G_CX4 (0x0) +#define MDIO_PMAPMD_CTRL2_10G_EW (0x1) +#define MDIO_PMAPMD_CTRL2_10G_LW (0x2) +#define MDIO_PMAPMD_CTRL2_10G_SW (0x3) +#define MDIO_PMAPMD_CTRL2_10G_LX4 (0x4) +#define MDIO_PMAPMD_CTRL2_10G_ER (0x5) +#define MDIO_PMAPMD_CTRL2_10G_LR (0x6) +#define MDIO_PMAPMD_CTRL2_10G_SR (0x7) +/* Reserved */ +#define MDIO_PMAPMD_CTRL2_10G_BT (0x9) +/* Reserved */ +/* Reserved */ +#define MDIO_PMAPMD_CTRL2_1G_BT (0xc) +/* Reserved */ +#define MDIO_PMAPMD_CTRL2_100_BT (0xe) +#define MDIO_PMAPMD_CTRL2_10_BT (0xf) +#define MDIO_PMAPMD_CTRL2_TYPE_MASK (0xf) + +/* /\* PHY XGXS lane state *\/ */ +#define MDIO_PHYXS_LANE_STATE (0x18) +#define MDIO_PHYXS_LANE_ALIGNED_LBN (12) + +/* AN registers */ +#define MDIO_AN_STATUS (1) +#define MDIO_AN_STATUS_XNP_LBN (7) +#define MDIO_AN_STATUS_PAGE_LBN (6) +#define MDIO_AN_STATUS_AN_DONE_LBN (5) +#define MDIO_AN_STATUS_LP_AN_CAP_LBN (0) + +#define MDIO_AN_10GBT_STATUS (33) +#define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */ +#define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */ +#define MDIO_AN_10GBT_STATUS_LOC_OK_LBN (13) /* Local OK */ +#define MDIO_AN_10GBT_STATUS_REM_OK_LBN (12) /* Remote OK */ +#define MDIO_AN_10GBT_STATUS_LP_10G_LBN (11) /* Link partner is 10GBT capable */ +#define MDIO_AN_10GBT_STATUS_LP_LTA_LBN (10) /* LP loop timing ability */ +#define MDIO_AN_10GBT_STATUS_LP_TRR_LBN (9) /* LP Training Reset Request */ + + +/* Packing of the prt and dev arguments of clause 45 style MDIO into a + * single int so they can be passed into the mdio_read/write functions + * that currently exist. Note that as Falcon is the only current user, + * the packed form is chosen to match what Falcon needs to write into + * a register. This is checked at compile-time so do not change it. If + * your target chip needs things layed out differently you will need + * to unpack the arguments in your chip-specific mdio functions. + */ + /* These are defined by the standard. */ +#define MDIO45_PRT_ID_WIDTH (5) +#define MDIO45_DEV_ID_WIDTH (5) + +/* The prt ID is just packed in immediately to the left of the dev ID */ +#define MDIO45_PRT_DEV_WIDTH (MDIO45_PRT_ID_WIDTH + MDIO45_DEV_ID_WIDTH) + +#define MDIO45_PRT_ID_MASK ((1 << MDIO45_PRT_DEV_WIDTH) - 1) +/* This is the prt + dev extended by 1 bit to hold the 'is clause 45' flag. */ +#define MDIO45_XPRT_ID_WIDTH (MDIO45_PRT_DEV_WIDTH + 1) +#define MDIO45_XPRT_ID_MASK ((1 << MDIO45_XPRT_ID_WIDTH) - 1) +#define MDIO45_XPRT_ID_IS10G (1 << (MDIO45_XPRT_ID_WIDTH - 1)) + + +#define MDIO45_PRT_ID_COMP_LBN MDIO45_DEV_ID_WIDTH +#define MDIO45_PRT_ID_COMP_WIDTH MDIO45_PRT_ID_WIDTH +#define MDIO45_DEV_ID_COMP_LBN 0 +#define MDIO45_DEV_ID_COMP_WIDTH MDIO45_DEV_ID_WIDTH + +/* Compose port and device into a phy_id */ +static inline int mdio_clause45_pack(u8 prt, u8 dev) +{ + efx_dword_t phy_id; + EFX_POPULATE_DWORD_2(phy_id, MDIO45_PRT_ID_COMP, prt, + MDIO45_DEV_ID_COMP, dev); + return MDIO45_XPRT_ID_IS10G | EFX_DWORD_VAL(phy_id); +} + +static inline void mdio_clause45_unpack(u32 val, u8 *prt, u8 *dev) +{ + efx_dword_t phy_id; + EFX_POPULATE_DWORD_1(phy_id, EFX_DWORD_0, val); + *prt = EFX_DWORD_FIELD(phy_id, MDIO45_PRT_ID_COMP); + *dev = EFX_DWORD_FIELD(phy_id, MDIO45_DEV_ID_COMP); +} + +static inline int mdio_clause45_read(struct efx_nic *efx, + u8 prt, u8 dev, u16 addr) +{ + return efx->mii.mdio_read(efx->net_dev, + mdio_clause45_pack(prt, dev), addr); +} + +static inline void mdio_clause45_write(struct efx_nic *efx, + u8 prt, u8 dev, u16 addr, int value) +{ + efx->mii.mdio_write(efx->net_dev, + mdio_clause45_pack(prt, dev), addr, value); +} + + +static inline u32 mdio_clause45_read_id(struct efx_nic *efx, int mmd) +{ + int phy_id = efx->mii.phy_id; + u16 id_low = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDLOW); + u16 id_hi = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDHI); + return (id_hi << 16) | (id_low); +} + +static inline int mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx) +{ + int i, sync, lane_status; + + for (i = 0; i < 2; ++i) + lane_status = mdio_clause45_read(efx, efx->mii.phy_id, + MDIO_MMD_PHYXS, + MDIO_PHYXS_LANE_STATE); + + sync = (lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN)) != 0; + if (!sync) + EFX_INFO(efx, "XGXS lane status: %x\n", lane_status); + return sync; +} + +extern const char *mdio_clause45_mmd_name(int mmd); + +/* + * Reset a specific MMD and wait for reset to clear. + * Return number of spins left (>0) on success, -%ETIMEDOUT on failure. + * + * This function will sleep + */ +extern int mdio_clause45_reset_mmd(struct efx_nic *efx, int mmd, + int spins, int spintime); + +/* As mdio_clause45_check_mmd but for multiple MMDs */ +int mdio_clause45_check_mmds(struct efx_nic *efx, + unsigned int mmd_mask, unsigned int fatal_mask); + +/* Check the link status of specified mmds in bit mask */ +extern int mdio_clause45_links_ok(struct efx_nic *efx, + unsigned int mmd_mask); + +/* Read (some of) the PHY settings over MDIO */ +extern void mdio_clause45_get_settings(struct efx_nic *efx, + struct ethtool_cmd *ecmd); + +/* Set (some of) the PHY settings over MDIO */ +extern int mdio_clause45_set_settings(struct efx_nic *efx, + struct ethtool_cmd *ecmd); + +/* Wait for specified MMDs to exit reset within a timeout */ +extern int mdio_clause45_wait_reset_mmds(struct efx_nic *efx, + unsigned int mmd_mask); + +#endif /* EFX_MDIO_10G_H */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h new file mode 100644 index 000000000000..c505482c2520 --- /dev/null +++ b/drivers/net/sfc/net_driver.h @@ -0,0 +1,883 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2005-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +/* Common definitions for all Efx net driver code */ + +#ifndef EFX_NET_DRIVER_H +#define EFX_NET_DRIVER_H + +#include <linux/version.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> +#include <linux/timer.h> +#include <linux/mii.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/device.h> +#include <linux/highmem.h> +#include <linux/workqueue.h> +#include <linux/inet_lro.h> + +#include "enum.h" +#include "bitfield.h" +#include "i2c-direct.h" + +#define EFX_MAX_LRO_DESCRIPTORS 8 +#define EFX_MAX_LRO_AGGR MAX_SKB_FRAGS + +/************************************************************************** + * + * Build definitions + * + **************************************************************************/ +#ifndef EFX_DRIVER_NAME +#define EFX_DRIVER_NAME "sfc" +#endif +#define EFX_DRIVER_VERSION "2.2.0136" + +#ifdef EFX_ENABLE_DEBUG +#define EFX_BUG_ON_PARANOID(x) BUG_ON(x) +#define EFX_WARN_ON_PARANOID(x) WARN_ON(x) +#else +#define EFX_BUG_ON_PARANOID(x) do {} while (0) +#define EFX_WARN_ON_PARANOID(x) do {} while (0) +#endif + +#define NET_DEV_REGISTERED(efx) \ + ((efx)->net_dev->reg_state == NETREG_REGISTERED) + +/* Include net device name in log messages if it has been registered. + * Use efx->name not efx->net_dev->name so that races with (un)registration + * are harmless. + */ +#define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "") + +/* Un-rate-limited logging */ +#define EFX_ERR(efx, fmt, args...) \ +dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args) + +#define EFX_INFO(efx, fmt, args...) \ +dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args) + +#ifdef EFX_ENABLE_DEBUG +#define EFX_LOG(efx, fmt, args...) \ +dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args) +#else +#define EFX_LOG(efx, fmt, args...) \ +dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args) +#endif + +#define EFX_TRACE(efx, fmt, args...) do {} while (0) + +#define EFX_REGDUMP(efx, fmt, args...) do {} while (0) + +/* Rate-limited logging */ +#define EFX_ERR_RL(efx, fmt, args...) \ +do {if (net_ratelimit()) EFX_ERR(efx, fmt, ##args); } while (0) + +#define EFX_INFO_RL(efx, fmt, args...) \ +do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0) + +#define EFX_LOG_RL(efx, fmt, args...) \ +do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0) + +/* Kernel headers may redefine inline anyway */ +#ifndef inline +#define inline inline __attribute__ ((always_inline)) +#endif + +/************************************************************************** + * + * Efx data structures + * + **************************************************************************/ + +#define EFX_MAX_CHANNELS 32 +#define EFX_MAX_TX_QUEUES 1 +#define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS + +/** + * struct efx_special_buffer - An Efx special buffer + * @addr: CPU base address of the buffer + * @dma_addr: DMA base address of the buffer + * @len: Buffer length, in bytes + * @index: Buffer index within controller;s buffer table + * @entries: Number of buffer table entries + * + * Special buffers are used for the event queues and the TX and RX + * descriptor queues for each channel. They are *not* used for the + * actual transmit and receive buffers. + * + * Note that for Falcon, TX and RX descriptor queues live in host memory. + * Allocation and freeing procedures must take this into account. + */ +struct efx_special_buffer { + void *addr; + dma_addr_t dma_addr; + unsigned int len; + int index; + int entries; +}; + +/** + * struct efx_tx_buffer - An Efx TX buffer + * @skb: The associated socket buffer. + * Set only on the final fragment of a packet; %NULL for all other + * fragments. When this fragment completes, then we can free this + * skb. + * @dma_addr: DMA address of the fragment. + * @len: Length of this fragment. + * This field is zero when the queue slot is empty. + * @continuation: True if this fragment is not the end of a packet. + * @unmap_single: True if pci_unmap_single should be used. + * @unmap_addr: DMA address to unmap + * @unmap_len: Length of this fragment to unmap + */ +struct efx_tx_buffer { + const struct sk_buff *skb; + dma_addr_t dma_addr; + unsigned short len; + unsigned char continuation; + unsigned char unmap_single; + dma_addr_t unmap_addr; + unsigned short unmap_len; +}; + +/** + * struct efx_tx_queue - An Efx TX queue + * + * This is a ring buffer of TX fragments. + * Since the TX completion path always executes on the same + * CPU and the xmit path can operate on different CPUs, + * performance is increased by ensuring that the completion + * path and the xmit path operate on different cache lines. + * This is particularly important if the xmit path is always + * executing on one CPU which is different from the completion + * path. There is also a cache line for members which are + * read but not written on the fast path. + * + * @efx: The associated Efx NIC + * @queue: DMA queue number + * @used: Queue is used by net driver + * @channel: The associated channel + * @buffer: The software buffer ring + * @txd: The hardware descriptor ring + * @read_count: Current read pointer. + * This is the number of buffers that have been removed from both rings. + * @stopped: Stopped flag. + * Set if this TX queue is currently stopping its port. + * @insert_count: Current insert pointer + * This is the number of buffers that have been added to the + * software ring. + * @write_count: Current write pointer + * This is the number of buffers that have been added to the + * hardware ring. + * @old_read_count: The value of read_count when last checked. + * This is here for performance reasons. The xmit path will + * only get the up-to-date value of read_count if this + * variable indicates that the queue is full. This is to + * avoid cache-line ping-pong between the xmit path and the + * completion path. + */ +struct efx_tx_queue { + /* Members which don't change on the fast path */ + struct efx_nic *efx ____cacheline_aligned_in_smp; + int queue; + int used; + struct efx_channel *channel; + struct efx_nic *nic; + struct efx_tx_buffer *buffer; + struct efx_special_buffer txd; + + /* Members used mainly on the completion path */ + unsigned int read_count ____cacheline_aligned_in_smp; + int stopped; + + /* Members used only on the xmit path */ + unsigned int insert_count ____cacheline_aligned_in_smp; + unsigned int write_count; + unsigned int old_read_count; +}; + +/** + * struct efx_rx_buffer - An Efx RX data buffer + * @dma_addr: DMA base address of the buffer + * @skb: The associated socket buffer, if any. + * If both this and page are %NULL, the buffer slot is currently free. + * @page: The associated page buffer, if any. + * If both this and skb are %NULL, the buffer slot is currently free. + * @data: Pointer to ethernet header + * @len: Buffer length, in bytes. + * @unmap_addr: DMA address to unmap + */ +struct efx_rx_buffer { + dma_addr_t dma_addr; + struct sk_buff *skb; + struct page *page; + char *data; + unsigned int len; + dma_addr_t unmap_addr; +}; + +/** + * struct efx_rx_queue - An Efx RX queue + * @efx: The associated Efx NIC + * @queue: DMA queue number + * @used: Queue is used by net driver + * @channel: The associated channel + * @buffer: The software buffer ring + * @rxd: The hardware descriptor ring + * @added_count: Number of buffers added to the receive queue. + * @notified_count: Number of buffers given to NIC (<= @added_count). + * @removed_count: Number of buffers removed from the receive queue. + * @add_lock: Receive queue descriptor add spin lock. + * This lock must be held in order to add buffers to the RX + * descriptor ring (rxd and buffer) and to update added_count (but + * not removed_count). + * @max_fill: RX descriptor maximum fill level (<= ring size) + * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill + * (<= @max_fill) + * @fast_fill_limit: The level to which a fast fill will fill + * (@fast_fill_trigger <= @fast_fill_limit <= @max_fill) + * @min_fill: RX descriptor minimum non-zero fill level. + * This records the minimum fill level observed when a ring + * refill was triggered. + * @min_overfill: RX descriptor minimum overflow fill level. + * This records the minimum fill level at which RX queue + * overflow was observed. It should never be set. + * @alloc_page_count: RX allocation strategy counter. + * @alloc_skb_count: RX allocation strategy counter. + * @work: Descriptor push work thread + * @buf_page: Page for next RX buffer. + * We can use a single page for multiple RX buffers. This tracks + * the remaining space in the allocation. + * @buf_dma_addr: Page's DMA address. + * @buf_data: Page's host address. + */ +struct efx_rx_queue { + struct efx_nic *efx; + int queue; + int used; + struct efx_channel *channel; + struct efx_rx_buffer *buffer; + struct efx_special_buffer rxd; + + int added_count; + int notified_count; + int removed_count; + spinlock_t add_lock; + unsigned int max_fill; + unsigned int fast_fill_trigger; + unsigned int fast_fill_limit; + unsigned int min_fill; + unsigned int min_overfill; + unsigned int alloc_page_count; + unsigned int alloc_skb_count; + struct delayed_work work; + unsigned int slow_fill_count; + + struct page *buf_page; + dma_addr_t buf_dma_addr; + char *buf_data; +}; + +/** + * struct efx_buffer - An Efx general-purpose buffer + * @addr: host base address of the buffer + * @dma_addr: DMA base address of the buffer + * @len: Buffer length, in bytes + * + * Falcon uses these buffers for its interrupt status registers and + * MAC stats dumps. + */ +struct efx_buffer { + void *addr; + dma_addr_t dma_addr; + unsigned int len; +}; + + +/* Flags for channel->used_flags */ +#define EFX_USED_BY_RX 1 +#define EFX_USED_BY_TX 2 +#define EFX_USED_BY_RX_TX (EFX_USED_BY_RX | EFX_USED_BY_TX) + +enum efx_rx_alloc_method { + RX_ALLOC_METHOD_AUTO = 0, + RX_ALLOC_METHOD_SKB = 1, + RX_ALLOC_METHOD_PAGE = 2, +}; + +/** + * struct efx_channel - An Efx channel + * + * A channel comprises an event queue, at least one TX queue, at least + * one RX queue, and an associated tasklet for processing the event + * queue. + * + * @efx: Associated Efx NIC + * @evqnum: Event queue number + * @channel: Channel instance number + * @used_flags: Channel is used by net driver + * @enabled: Channel enabled indicator + * @irq: IRQ number (MSI and MSI-X only) + * @has_interrupt: Channel has an interrupt + * @irq_moderation: IRQ moderation value (in us) + * @napi_dev: Net device used with NAPI + * @napi_str: NAPI control structure + * @reset_work: Scheduled reset work thread + * @work_pending: Is work pending via NAPI? + * @eventq: Event queue buffer + * @eventq_read_ptr: Event queue read pointer + * @last_eventq_read_ptr: Last event queue read pointer value. + * @eventq_magic: Event queue magic value for driver-generated test events + * @lro_mgr: LRO state + * @rx_alloc_level: Watermark based heuristic counter for pushing descriptors + * and diagnostic counters + * @rx_alloc_push_pages: RX allocation method currently in use for pushing + * descriptors + * @rx_alloc_pop_pages: RX allocation method currently in use for popping + * descriptors + * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors + * @n_rx_ip_frag_err: Count of RX IP fragment errors + * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors + * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors + * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors + * @n_rx_overlength: Count of RX_OVERLENGTH errors + * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun + */ +struct efx_channel { + struct efx_nic *efx; + int evqnum; + int channel; + int used_flags; + int enabled; + int irq; + unsigned int has_interrupt; + unsigned int irq_moderation; + struct net_device *napi_dev; + struct napi_struct napi_str; + struct work_struct reset_work; + int work_pending; + struct efx_special_buffer eventq; + unsigned int eventq_read_ptr; + unsigned int last_eventq_read_ptr; + unsigned int eventq_magic; + + struct net_lro_mgr lro_mgr; + int rx_alloc_level; + int rx_alloc_push_pages; + int rx_alloc_pop_pages; + + unsigned n_rx_tobe_disc; + unsigned n_rx_ip_frag_err; + unsigned n_rx_ip_hdr_chksum_err; + unsigned n_rx_tcp_udp_chksum_err; + unsigned n_rx_frm_trunc; + unsigned n_rx_overlength; + unsigned n_skbuff_leaks; + + /* Used to pipeline received packets in order to optimise memory + * access with prefetches. + */ + struct efx_rx_buffer *rx_pkt; + int rx_pkt_csummed; + +}; + +/** + * struct efx_blinker - S/W LED blinking context + * @led_num: LED ID (board-specific meaning) + * @state: Current state - on or off + * @resubmit: Timer resubmission flag + * @timer: Control timer for blinking + */ +struct efx_blinker { + int led_num; + int state; + int resubmit; + struct timer_list timer; +}; + + +/** + * struct efx_board - board information + * @type: Board model type + * @major: Major rev. ('A', 'B' ...) + * @minor: Minor rev. (0, 1, ...) + * @init: Initialisation function + * @init_leds: Sets up board LEDs + * @set_fault_led: Turns the fault LED on or off + * @blink: Starts/stops blinking + * @blinker: used to blink LEDs in software + */ +struct efx_board { + int type; + int major; + int minor; + int (*init) (struct efx_nic *nic); + /* As the LEDs are typically attached to the PHY, LEDs + * have a separate init callback that happens later than + * board init. */ + int (*init_leds)(struct efx_nic *efx); + void (*set_fault_led) (struct efx_nic *efx, int state); + void (*blink) (struct efx_nic *efx, int start); + struct efx_blinker blinker; +}; + +enum efx_int_mode { + /* Be careful if altering to correct macro below */ + EFX_INT_MODE_MSIX = 0, + EFX_INT_MODE_MSI = 1, + EFX_INT_MODE_LEGACY = 2, + EFX_INT_MODE_MAX /* Insert any new items before this */ +}; +#define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI) + +enum phy_type { + PHY_TYPE_NONE = 0, + PHY_TYPE_CX4_RTMR = 1, + PHY_TYPE_1G_ALASKA = 2, + PHY_TYPE_10XPRESS = 3, + PHY_TYPE_XFP = 4, + PHY_TYPE_PM8358 = 6, + PHY_TYPE_MAX /* Insert any new items before this */ +}; + +#define PHY_ADDR_INVALID 0xff + +enum nic_state { + STATE_INIT = 0, + STATE_RUNNING = 1, + STATE_FINI = 2, + STATE_RESETTING = 3, /* rtnl_lock always held */ + STATE_DISABLED = 4, + STATE_MAX, +}; + +/* + * Alignment of page-allocated RX buffers + * + * Controls the number of bytes inserted at the start of an RX buffer. + * This is the equivalent of NET_IP_ALIGN [which controls the alignment + * of the skb->head for hardware DMA]. + */ +#if defined(__i386__) || defined(__x86_64__) +#define EFX_PAGE_IP_ALIGN 0 +#else +#define EFX_PAGE_IP_ALIGN NET_IP_ALIGN +#endif + +/* + * Alignment of the skb->head which wraps a page-allocated RX buffer + * + * The skb allocated to wrap an rx_buffer can have this alignment. Since + * the data is memcpy'd from the rx_buf, it does not need to be equal to + * EFX_PAGE_IP_ALIGN. + */ +#define EFX_PAGE_SKB_ALIGN 2 + +/* Forward declaration */ +struct efx_nic; + +/* Pseudo bit-mask flow control field */ +enum efx_fc_type { + EFX_FC_RX = 1, + EFX_FC_TX = 2, + EFX_FC_AUTO = 4, +}; + +/** + * struct efx_phy_operations - Efx PHY operations table + * @init: Initialise PHY + * @fini: Shut down PHY + * @reconfigure: Reconfigure PHY (e.g. for new link parameters) + * @clear_interrupt: Clear down interrupt + * @blink: Blink LEDs + * @check_hw: Check hardware + * @reset_xaui: Reset XAUI side of PHY for (software sequenced reset) + * @mmds: MMD presence mask + */ +struct efx_phy_operations { + int (*init) (struct efx_nic *efx); + void (*fini) (struct efx_nic *efx); + void (*reconfigure) (struct efx_nic *efx); + void (*clear_interrupt) (struct efx_nic *efx); + int (*check_hw) (struct efx_nic *efx); + void (*reset_xaui) (struct efx_nic *efx); + int mmds; +}; + +/* + * Efx extended statistics + * + * Not all statistics are provided by all supported MACs. The purpose + * is this structure is to contain the raw statistics provided by each + * MAC. + */ +struct efx_mac_stats { + u64 tx_bytes; + u64 tx_good_bytes; + u64 tx_bad_bytes; + unsigned long tx_packets; + unsigned long tx_bad; + unsigned long tx_pause; + unsigned long tx_control; + unsigned long tx_unicast; + unsigned long tx_multicast; + unsigned long tx_broadcast; + unsigned long tx_lt64; + unsigned long tx_64; + unsigned long tx_65_to_127; + unsigned long tx_128_to_255; + unsigned long tx_256_to_511; + unsigned long tx_512_to_1023; + unsigned long tx_1024_to_15xx; + unsigned long tx_15xx_to_jumbo; + unsigned long tx_gtjumbo; + unsigned long tx_collision; + unsigned long tx_single_collision; + unsigned long tx_multiple_collision; + unsigned long tx_excessive_collision; + unsigned long tx_deferred; + unsigned long tx_late_collision; + unsigned long tx_excessive_deferred; + unsigned long tx_non_tcpudp; + unsigned long tx_mac_src_error; + unsigned long tx_ip_src_error; + u64 rx_bytes; + u64 rx_good_bytes; + u64 rx_bad_bytes; + unsigned long rx_packets; + unsigned long rx_good; + unsigned long rx_bad; + unsigned long rx_pause; + unsigned long rx_control; + unsigned long rx_unicast; + unsigned long rx_multicast; + unsigned long rx_broadcast; + unsigned long rx_lt64; + unsigned long rx_64; + unsigned long rx_65_to_127; + unsigned long rx_128_to_255; + unsigned long rx_256_to_511; + unsigned long rx_512_to_1023; + unsigned long rx_1024_to_15xx; + unsigned long rx_15xx_to_jumbo; + unsigned long rx_gtjumbo; + unsigned long rx_bad_lt64; + unsigned long rx_bad_64_to_15xx; + unsigned long rx_bad_15xx_to_jumbo; + unsigned long rx_bad_gtjumbo; + unsigned long rx_overflow; + unsigned long rx_missed; + unsigned long rx_false_carrier; + unsigned long rx_symbol_error; + unsigned long rx_align_error; + unsigned long rx_length_error; + unsigned long rx_internal_error; + unsigned long rx_good_lt64; +}; + +/* Number of bits used in a multicast filter hash address */ +#define EFX_MCAST_HASH_BITS 8 + +/* Number of (single-bit) entries in a multicast filter hash */ +#define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS) + +/* An Efx multicast filter hash */ +union efx_multicast_hash { + u8 byte[EFX_MCAST_HASH_ENTRIES / 8]; + efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8]; +}; + +/** + * struct efx_nic - an Efx NIC + * @name: Device name (net device name or bus id before net device registered) + * @pci_dev: The PCI device + * @type: Controller type attributes + * @legacy_irq: IRQ number + * @workqueue: Workqueue for resets, port reconfigures and the HW monitor + * @reset_work: Scheduled reset workitem + * @monitor_work: Hardware monitor workitem + * @membase_phys: Memory BAR value as physical address + * @membase: Memory BAR value + * @biu_lock: BIU (bus interface unit) lock + * @interrupt_mode: Interrupt mode + * @i2c: I2C interface + * @board_info: Board-level information + * @state: Device state flag. Serialised by the rtnl_lock. + * @reset_pending: Pending reset method (normally RESET_TYPE_NONE) + * @tx_queue: TX DMA queues + * @rx_queue: RX DMA queues + * @channel: Channels + * @rss_queues: Number of RSS queues + * @rx_buffer_len: RX buffer length + * @rx_buffer_order: Order (log2) of number of pages for each RX buffer + * @irq_status: Interrupt status buffer + * @last_irq_cpu: Last CPU to handle interrupt. + * This register is written with the SMP processor ID whenever an + * interrupt is handled. It is used by falcon_test_interrupt() + * to verify that an interrupt has occurred. + * @n_rx_nodesc_drop_cnt: RX no descriptor drop count + * @nic_data: Hardware dependant state + * @mac_lock: MAC access lock. Protects @port_enabled, efx_monitor() and + * efx_reconfigure_port() + * @port_enabled: Port enabled indicator. + * Serialises efx_stop_all(), efx_start_all() and efx_monitor() and + * efx_reconfigure_work with kernel interfaces. Safe to read under any + * one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must + * be held to modify it. + * @port_initialized: Port initialized? + * @net_dev: Operating system network device. Consider holding the rtnl lock + * @rx_checksum_enabled: RX checksumming enabled + * @netif_stop_count: Port stop count + * @netif_stop_lock: Port stop lock + * @mac_stats: MAC statistics. These include all statistics the MACs + * can provide. Generic code converts these into a standard + * &struct net_device_stats. + * @stats_buffer: DMA buffer for statistics + * @stats_lock: Statistics update lock + * @mac_address: Permanent MAC address + * @phy_type: PHY type + * @phy_lock: PHY access lock + * @phy_op: PHY interface + * @phy_data: PHY private data (including PHY-specific stats) + * @mii: PHY interface + * @phy_powered: PHY power state + * @tx_disabled: PHY transmitter turned off + * @link_up: Link status + * @link_options: Link options (MII/GMII format) + * @n_link_state_changes: Number of times the link has changed state + * @promiscuous: Promiscuous flag. Protected by netif_tx_lock. + * @multicast_hash: Multicast hash table + * @flow_control: Flow control flags - separate RX/TX so can't use link_options + * @reconfigure_work: work item for dealing with PHY events + * + * The @priv field of the corresponding &struct net_device points to + * this. + */ +struct efx_nic { + char name[IFNAMSIZ]; + struct pci_dev *pci_dev; + const struct efx_nic_type *type; + int legacy_irq; + struct workqueue_struct *workqueue; + struct work_struct reset_work; + struct delayed_work monitor_work; + unsigned long membase_phys; + void __iomem *membase; + spinlock_t biu_lock; + enum efx_int_mode interrupt_mode; + + struct efx_i2c_interface i2c; + struct efx_board board_info; + + enum nic_state state; + enum reset_type reset_pending; + + struct efx_tx_queue tx_queue[EFX_MAX_TX_QUEUES]; + struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES]; + struct efx_channel channel[EFX_MAX_CHANNELS]; + + int rss_queues; + unsigned int rx_buffer_len; + unsigned int rx_buffer_order; + + struct efx_buffer irq_status; + volatile signed int last_irq_cpu; + + unsigned n_rx_nodesc_drop_cnt; + + void *nic_data; + + struct mutex mac_lock; + int port_enabled; + + int port_initialized; + struct net_device *net_dev; + int rx_checksum_enabled; + + atomic_t netif_stop_count; + spinlock_t netif_stop_lock; + + struct efx_mac_stats mac_stats; + struct efx_buffer stats_buffer; + spinlock_t stats_lock; + + unsigned char mac_address[ETH_ALEN]; + + enum phy_type phy_type; + spinlock_t phy_lock; + struct efx_phy_operations *phy_op; + void *phy_data; + struct mii_if_info mii; + + int link_up; + unsigned int link_options; + unsigned int n_link_state_changes; + + int promiscuous; + union efx_multicast_hash multicast_hash; + enum efx_fc_type flow_control; + struct work_struct reconfigure_work; + + atomic_t rx_reset; +}; + +/** + * struct efx_nic_type - Efx device type definition + * @mem_bar: Memory BAR number + * @mem_map_size: Memory BAR mapped size + * @txd_ptr_tbl_base: TX descriptor ring base address + * @rxd_ptr_tbl_base: RX descriptor ring base address + * @buf_tbl_base: Buffer table base address + * @evq_ptr_tbl_base: Event queue pointer table base address + * @evq_rptr_tbl_base: Event queue read-pointer table base address + * @txd_ring_mask: TX descriptor ring size - 1 (must be a power of two - 1) + * @rxd_ring_mask: RX descriptor ring size - 1 (must be a power of two - 1) + * @evq_size: Event queue size (must be a power of two) + * @max_dma_mask: Maximum possible DMA mask + * @tx_dma_mask: TX DMA mask + * @bug5391_mask: Address mask for bug 5391 workaround + * @rx_xoff_thresh: RX FIFO XOFF watermark (bytes) + * @rx_xon_thresh: RX FIFO XON watermark (bytes) + * @rx_buffer_padding: Padding added to each RX buffer + * @max_interrupt_mode: Highest capability interrupt mode supported + * from &enum efx_init_mode. + * @phys_addr_channels: Number of channels with physically addressed + * descriptors + */ +struct efx_nic_type { + unsigned int mem_bar; + unsigned int mem_map_size; + unsigned int txd_ptr_tbl_base; + unsigned int rxd_ptr_tbl_base; + unsigned int buf_tbl_base; + unsigned int evq_ptr_tbl_base; + unsigned int evq_rptr_tbl_base; + + unsigned int txd_ring_mask; + unsigned int rxd_ring_mask; + unsigned int evq_size; + dma_addr_t max_dma_mask; + unsigned int tx_dma_mask; + unsigned bug5391_mask; + + int rx_xoff_thresh; + int rx_xon_thresh; + unsigned int rx_buffer_padding; + unsigned int max_interrupt_mode; + unsigned int phys_addr_channels; +}; + +/************************************************************************** + * + * Prototypes and inline functions + * + *************************************************************************/ + +/* Iterate over all used channels */ +#define efx_for_each_channel(_channel, _efx) \ + for (_channel = &_efx->channel[0]; \ + _channel < &_efx->channel[EFX_MAX_CHANNELS]; \ + _channel++) \ + if (!_channel->used_flags) \ + continue; \ + else + +/* Iterate over all used channels with interrupts */ +#define efx_for_each_channel_with_interrupt(_channel, _efx) \ + for (_channel = &_efx->channel[0]; \ + _channel < &_efx->channel[EFX_MAX_CHANNELS]; \ + _channel++) \ + if (!(_channel->used_flags && _channel->has_interrupt)) \ + continue; \ + else + +/* Iterate over all used TX queues */ +#define efx_for_each_tx_queue(_tx_queue, _efx) \ + for (_tx_queue = &_efx->tx_queue[0]; \ + _tx_queue < &_efx->tx_queue[EFX_MAX_TX_QUEUES]; \ + _tx_queue++) \ + if (!_tx_queue->used) \ + continue; \ + else + +/* Iterate over all TX queues belonging to a channel */ +#define efx_for_each_channel_tx_queue(_tx_queue, _channel) \ + for (_tx_queue = &_channel->efx->tx_queue[0]; \ + _tx_queue < &_channel->efx->tx_queue[EFX_MAX_TX_QUEUES]; \ + _tx_queue++) \ + if ((!_tx_queue->used) || \ + (_tx_queue->channel != _channel)) \ + continue; \ + else + +/* Iterate over all used RX queues */ +#define efx_for_each_rx_queue(_rx_queue, _efx) \ + for (_rx_queue = &_efx->rx_queue[0]; \ + _rx_queue < &_efx->rx_queue[EFX_MAX_RX_QUEUES]; \ + _rx_queue++) \ + if (!_rx_queue->used) \ + continue; \ + else + +/* Iterate over all RX queues belonging to a channel */ +#define efx_for_each_channel_rx_queue(_rx_queue, _channel) \ + for (_rx_queue = &_channel->efx->rx_queue[0]; \ + _rx_queue < &_channel->efx->rx_queue[EFX_MAX_RX_QUEUES]; \ + _rx_queue++) \ + if ((!_rx_queue->used) || \ + (_rx_queue->channel != _channel)) \ + continue; \ + else + +/* Returns a pointer to the specified receive buffer in the RX + * descriptor queue. + */ +static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue, + unsigned int index) +{ + return (&rx_queue->buffer[index]); +} + +/* Set bit in a little-endian bitfield */ +static inline void set_bit_le(int nr, unsigned char *addr) +{ + addr[nr / 8] |= (1 << (nr % 8)); +} + +/* Clear bit in a little-endian bitfield */ +static inline void clear_bit_le(int nr, unsigned char *addr) +{ + addr[nr / 8] &= ~(1 << (nr % 8)); +} + + +/** + * EFX_MAX_FRAME_LEN - calculate maximum frame length + * + * This calculates the maximum frame length that will be used for a + * given MTU. The frame length will be equal to the MTU plus a + * constant amount of header space and padding. This is the quantity + * that the net driver will program into the MAC as the maximum frame + * length. + * + * The 10G MAC used in Falcon requires 8-byte alignment on the frame + * length, so we round up to the nearest 8. + */ +#define EFX_MAX_FRAME_LEN(mtu) \ + ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */) + 7) & ~7) + + +#endif /* EFX_NET_DRIVER_H */ diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h new file mode 100644 index 000000000000..9d02c84e6b2d --- /dev/null +++ b/drivers/net/sfc/phy.h @@ -0,0 +1,48 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2007 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_PHY_H +#define EFX_PHY_H + +/**************************************************************************** + * 10Xpress (SFX7101) PHY + */ +extern struct efx_phy_operations falcon_tenxpress_phy_ops; + +enum tenxpress_state { + TENXPRESS_STATUS_OFF = 0, + TENXPRESS_STATUS_OTEMP = 1, + TENXPRESS_STATUS_NORMAL = 2, +}; + +extern void tenxpress_set_state(struct efx_nic *efx, + enum tenxpress_state state); +extern void tenxpress_phy_blink(struct efx_nic *efx, int blink); +extern void tenxpress_crc_err(struct efx_nic *efx); + +/**************************************************************************** + * Exported functions from the driver for XFP optical PHYs + */ +extern struct efx_phy_operations falcon_xfp_phy_ops; + +/* The QUAKE XFP PHY provides various H/W control states for LEDs */ +#define QUAKE_LED_LINK_INVAL (0) +#define QUAKE_LED_LINK_STAT (1) +#define QUAKE_LED_LINK_ACT (2) +#define QUAKE_LED_LINK_ACTSTAT (3) +#define QUAKE_LED_OFF (4) +#define QUAKE_LED_ON (5) +#define QUAKE_LED_LINK_INPUT (6) /* Pin is an input. */ +/* What link the LED tracks */ +#define QUAKE_LED_TXLINK (0) +#define QUAKE_LED_RXLINK (8) + +extern void xfp_set_led(struct efx_nic *p, int led, int state); + +#endif diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c new file mode 100644 index 000000000000..551299b462ae --- /dev/null +++ b/drivers/net/sfc/rx.c @@ -0,0 +1,875 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2005-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/socket.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/udp.h> +#include <net/ip.h> +#include <net/checksum.h> +#include "net_driver.h" +#include "rx.h" +#include "efx.h" +#include "falcon.h" +#include "workarounds.h" + +/* Number of RX descriptors pushed at once. */ +#define EFX_RX_BATCH 8 + +/* Size of buffer allocated for skb header area. */ +#define EFX_SKB_HEADERS 64u + +/* + * rx_alloc_method - RX buffer allocation method + * + * This driver supports two methods for allocating and using RX buffers: + * each RX buffer may be backed by an skb or by an order-n page. + * + * When LRO is in use then the second method has a lower overhead, + * since we don't have to allocate then free skbs on reassembled frames. + * + * Values: + * - RX_ALLOC_METHOD_AUTO = 0 + * - RX_ALLOC_METHOD_SKB = 1 + * - RX_ALLOC_METHOD_PAGE = 2 + * + * The heuristic for %RX_ALLOC_METHOD_AUTO is a simple hysteresis count + * controlled by the parameters below. + * + * - Since pushing and popping descriptors are separated by the rx_queue + * size, so the watermarks should be ~rxd_size. + * - The performance win by using page-based allocation for LRO is less + * than the performance hit of using page-based allocation of non-LRO, + * so the watermarks should reflect this. + * + * Per channel we maintain a single variable, updated by each channel: + * + * rx_alloc_level += (lro_performed ? RX_ALLOC_FACTOR_LRO : + * RX_ALLOC_FACTOR_SKB) + * Per NAPI poll interval, we constrain rx_alloc_level to 0..MAX (which + * limits the hysteresis), and update the allocation strategy: + * + * rx_alloc_method = (rx_alloc_level > RX_ALLOC_LEVEL_LRO ? + * RX_ALLOC_METHOD_PAGE : RX_ALLOC_METHOD_SKB) + */ +static int rx_alloc_method = RX_ALLOC_METHOD_PAGE; + +#define RX_ALLOC_LEVEL_LRO 0x2000 +#define RX_ALLOC_LEVEL_MAX 0x3000 +#define RX_ALLOC_FACTOR_LRO 1 +#define RX_ALLOC_FACTOR_SKB (-2) + +/* This is the percentage fill level below which new RX descriptors + * will be added to the RX descriptor ring. + */ +static unsigned int rx_refill_threshold = 90; + +/* This is the percentage fill level to which an RX queue will be refilled + * when the "RX refill threshold" is reached. + */ +static unsigned int rx_refill_limit = 95; + +/* + * RX maximum head room required. + * + * This must be at least 1 to prevent overflow and at least 2 to allow + * pipelined receives. + */ +#define EFX_RXD_HEAD_ROOM 2 + +/* Macros for zero-order pages (potentially) containing multiple RX buffers */ +#define RX_DATA_OFFSET(_data) \ + (((unsigned long) (_data)) & (PAGE_SIZE-1)) +#define RX_BUF_OFFSET(_rx_buf) \ + RX_DATA_OFFSET((_rx_buf)->data) + +#define RX_PAGE_SIZE(_efx) \ + (PAGE_SIZE * (1u << (_efx)->rx_buffer_order)) + + +/************************************************************************** + * + * Linux generic LRO handling + * + ************************************************************************** + */ + +static int efx_lro_get_skb_hdr(struct sk_buff *skb, void **ip_hdr, + void **tcpudp_hdr, u64 *hdr_flags, void *priv) +{ + struct efx_channel *channel = (struct efx_channel *)priv; + struct iphdr *iph; + struct tcphdr *th; + + iph = (struct iphdr *)skb->data; + if (skb->protocol != htons(ETH_P_IP) || iph->protocol != IPPROTO_TCP) + goto fail; + + th = (struct tcphdr *)(skb->data + iph->ihl * 4); + + *tcpudp_hdr = th; + *ip_hdr = iph; + *hdr_flags = LRO_IPV4 | LRO_TCP; + + channel->rx_alloc_level += RX_ALLOC_FACTOR_LRO; + return 0; +fail: + channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB; + return -1; +} + +static int efx_get_frag_hdr(struct skb_frag_struct *frag, void **mac_hdr, + void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags, + void *priv) +{ + struct efx_channel *channel = (struct efx_channel *)priv; + struct ethhdr *eh; + struct iphdr *iph; + + /* We support EtherII and VLAN encapsulated IPv4 */ + eh = (struct ethhdr *)(page_address(frag->page) + frag->page_offset); + *mac_hdr = eh; + + if (eh->h_proto == htons(ETH_P_IP)) { + iph = (struct iphdr *)(eh + 1); + } else { + struct vlan_ethhdr *veh = (struct vlan_ethhdr *)eh; + if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP)) + goto fail; + + iph = (struct iphdr *)(veh + 1); + } + *ip_hdr = iph; + + /* We can only do LRO over TCP */ + if (iph->protocol != IPPROTO_TCP) + goto fail; + + *hdr_flags = LRO_IPV4 | LRO_TCP; + *tcpudp_hdr = (struct tcphdr *)((u8 *) iph + iph->ihl * 4); + + channel->rx_alloc_level += RX_ALLOC_FACTOR_LRO; + return 0; + fail: + channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB; + return -1; +} + +int efx_lro_init(struct net_lro_mgr *lro_mgr, struct efx_nic *efx) +{ + size_t s = sizeof(struct net_lro_desc) * EFX_MAX_LRO_DESCRIPTORS; + struct net_lro_desc *lro_arr; + + /* Allocate the LRO descriptors structure */ + lro_arr = kzalloc(s, GFP_KERNEL); + if (lro_arr == NULL) + return -ENOMEM; + + lro_mgr->lro_arr = lro_arr; + lro_mgr->max_desc = EFX_MAX_LRO_DESCRIPTORS; + lro_mgr->max_aggr = EFX_MAX_LRO_AGGR; + lro_mgr->frag_align_pad = EFX_PAGE_SKB_ALIGN; + + lro_mgr->get_skb_header = efx_lro_get_skb_hdr; + lro_mgr->get_frag_header = efx_get_frag_hdr; + lro_mgr->dev = efx->net_dev; + + lro_mgr->features = LRO_F_NAPI; + + /* We can pass packets up with the checksum intact */ + lro_mgr->ip_summed = CHECKSUM_UNNECESSARY; + + lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY; + + return 0; +} + +void efx_lro_fini(struct net_lro_mgr *lro_mgr) +{ + kfree(lro_mgr->lro_arr); + lro_mgr->lro_arr = NULL; +} + +/** + * efx_init_rx_buffer_skb - create new RX buffer using skb-based allocation + * + * @rx_queue: Efx RX queue + * @rx_buf: RX buffer structure to populate + * + * This allocates memory for a new receive buffer, maps it for DMA, + * and populates a struct efx_rx_buffer with the relevant + * information. Return a negative error code or 0 on success. + */ +static inline int efx_init_rx_buffer_skb(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf) +{ + struct efx_nic *efx = rx_queue->efx; + struct net_device *net_dev = efx->net_dev; + int skb_len = efx->rx_buffer_len; + + rx_buf->skb = netdev_alloc_skb(net_dev, skb_len); + if (unlikely(!rx_buf->skb)) + return -ENOMEM; + + /* Adjust the SKB for padding and checksum */ + skb_reserve(rx_buf->skb, NET_IP_ALIGN); + rx_buf->len = skb_len - NET_IP_ALIGN; + rx_buf->data = (char *)rx_buf->skb->data; + rx_buf->skb->ip_summed = CHECKSUM_UNNECESSARY; + + rx_buf->dma_addr = pci_map_single(efx->pci_dev, + rx_buf->data, rx_buf->len, + PCI_DMA_FROMDEVICE); + + if (unlikely(pci_dma_mapping_error(rx_buf->dma_addr))) { + dev_kfree_skb_any(rx_buf->skb); + rx_buf->skb = NULL; + return -EIO; + } + + return 0; +} + +/** + * efx_init_rx_buffer_page - create new RX buffer using page-based allocation + * + * @rx_queue: Efx RX queue + * @rx_buf: RX buffer structure to populate + * + * This allocates memory for a new receive buffer, maps it for DMA, + * and populates a struct efx_rx_buffer with the relevant + * information. Return a negative error code or 0 on success. + */ +static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf) +{ + struct efx_nic *efx = rx_queue->efx; + int bytes, space, offset; + + bytes = efx->rx_buffer_len - EFX_PAGE_IP_ALIGN; + + /* If there is space left in the previously allocated page, + * then use it. Otherwise allocate a new one */ + rx_buf->page = rx_queue->buf_page; + if (rx_buf->page == NULL) { + dma_addr_t dma_addr; + + rx_buf->page = alloc_pages(__GFP_COLD | __GFP_COMP | GFP_ATOMIC, + efx->rx_buffer_order); + if (unlikely(rx_buf->page == NULL)) + return -ENOMEM; + + dma_addr = pci_map_page(efx->pci_dev, rx_buf->page, + 0, RX_PAGE_SIZE(efx), + PCI_DMA_FROMDEVICE); + + if (unlikely(pci_dma_mapping_error(dma_addr))) { + __free_pages(rx_buf->page, efx->rx_buffer_order); + rx_buf->page = NULL; + return -EIO; + } + + rx_queue->buf_page = rx_buf->page; + rx_queue->buf_dma_addr = dma_addr; + rx_queue->buf_data = ((char *) page_address(rx_buf->page) + + EFX_PAGE_IP_ALIGN); + } + + offset = RX_DATA_OFFSET(rx_queue->buf_data); + rx_buf->len = bytes; + rx_buf->dma_addr = rx_queue->buf_dma_addr + offset; + rx_buf->data = rx_queue->buf_data; + + /* Try to pack multiple buffers per page */ + if (efx->rx_buffer_order == 0) { + /* The next buffer starts on the next 512 byte boundary */ + rx_queue->buf_data += ((bytes + 0x1ff) & ~0x1ff); + offset += ((bytes + 0x1ff) & ~0x1ff); + + space = RX_PAGE_SIZE(efx) - offset; + if (space >= bytes) { + /* Refs dropped on kernel releasing each skb */ + get_page(rx_queue->buf_page); + goto out; + } + } + + /* This is the final RX buffer for this page, so mark it for + * unmapping */ + rx_queue->buf_page = NULL; + rx_buf->unmap_addr = rx_queue->buf_dma_addr; + + out: + return 0; +} + +/* This allocates memory for a new receive buffer, maps it for DMA, + * and populates a struct efx_rx_buffer with the relevant + * information. + */ +static inline int efx_init_rx_buffer(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *new_rx_buf) +{ + int rc = 0; + + if (rx_queue->channel->rx_alloc_push_pages) { + new_rx_buf->skb = NULL; + rc = efx_init_rx_buffer_page(rx_queue, new_rx_buf); + rx_queue->alloc_page_count++; + } else { + new_rx_buf->page = NULL; + rc = efx_init_rx_buffer_skb(rx_queue, new_rx_buf); + rx_queue->alloc_skb_count++; + } + + if (unlikely(rc < 0)) + EFX_LOG_RL(rx_queue->efx, "%s RXQ[%d] =%d\n", __func__, + rx_queue->queue, rc); + return rc; +} + +static inline void efx_unmap_rx_buffer(struct efx_nic *efx, + struct efx_rx_buffer *rx_buf) +{ + if (rx_buf->page) { + EFX_BUG_ON_PARANOID(rx_buf->skb); + if (rx_buf->unmap_addr) { + pci_unmap_page(efx->pci_dev, rx_buf->unmap_addr, + RX_PAGE_SIZE(efx), PCI_DMA_FROMDEVICE); + rx_buf->unmap_addr = 0; + } + } else if (likely(rx_buf->skb)) { + pci_unmap_single(efx->pci_dev, rx_buf->dma_addr, + rx_buf->len, PCI_DMA_FROMDEVICE); + } +} + +static inline void efx_free_rx_buffer(struct efx_nic *efx, + struct efx_rx_buffer *rx_buf) +{ + if (rx_buf->page) { + __free_pages(rx_buf->page, efx->rx_buffer_order); + rx_buf->page = NULL; + } else if (likely(rx_buf->skb)) { + dev_kfree_skb_any(rx_buf->skb); + rx_buf->skb = NULL; + } +} + +static inline void efx_fini_rx_buffer(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf) +{ + efx_unmap_rx_buffer(rx_queue->efx, rx_buf); + efx_free_rx_buffer(rx_queue->efx, rx_buf); +} + +/** + * efx_fast_push_rx_descriptors - push new RX descriptors quickly + * @rx_queue: RX descriptor queue + * @retry: Recheck the fill level + * This will aim to fill the RX descriptor queue up to + * @rx_queue->@fast_fill_limit. If there is insufficient atomic + * memory to do so, the caller should retry. + */ +static int __efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue, + int retry) +{ + struct efx_rx_buffer *rx_buf; + unsigned fill_level, index; + int i, space, rc = 0; + + /* Calculate current fill level. Do this outside the lock, + * because most of the time we'll end up not wanting to do the + * fill anyway. + */ + fill_level = (rx_queue->added_count - rx_queue->removed_count); + EFX_BUG_ON_PARANOID(fill_level > + rx_queue->efx->type->rxd_ring_mask + 1); + + /* Don't fill if we don't need to */ + if (fill_level >= rx_queue->fast_fill_trigger) + return 0; + + /* Record minimum fill level */ + if (unlikely(fill_level < rx_queue->min_fill)) + if (fill_level) + rx_queue->min_fill = fill_level; + + /* Acquire RX add lock. If this lock is contended, then a fast + * fill must already be in progress (e.g. in the refill + * tasklet), so we don't need to do anything + */ + if (!spin_trylock_bh(&rx_queue->add_lock)) + return -1; + + retry: + /* Recalculate current fill level now that we have the lock */ + fill_level = (rx_queue->added_count - rx_queue->removed_count); + EFX_BUG_ON_PARANOID(fill_level > + rx_queue->efx->type->rxd_ring_mask + 1); + space = rx_queue->fast_fill_limit - fill_level; + if (space < EFX_RX_BATCH) + goto out_unlock; + + EFX_TRACE(rx_queue->efx, "RX queue %d fast-filling descriptor ring from" + " level %d to level %d using %s allocation\n", + rx_queue->queue, fill_level, rx_queue->fast_fill_limit, + rx_queue->channel->rx_alloc_push_pages ? "page" : "skb"); + + do { + for (i = 0; i < EFX_RX_BATCH; ++i) { + index = (rx_queue->added_count & + rx_queue->efx->type->rxd_ring_mask); + rx_buf = efx_rx_buffer(rx_queue, index); + rc = efx_init_rx_buffer(rx_queue, rx_buf); + if (unlikely(rc)) + goto out; + ++rx_queue->added_count; + } + } while ((space -= EFX_RX_BATCH) >= EFX_RX_BATCH); + + EFX_TRACE(rx_queue->efx, "RX queue %d fast-filled descriptor ring " + "to level %d\n", rx_queue->queue, + rx_queue->added_count - rx_queue->removed_count); + + out: + /* Send write pointer to card. */ + falcon_notify_rx_desc(rx_queue); + + /* If the fast fill is running inside from the refill tasklet, then + * for SMP systems it may be running on a different CPU to + * RX event processing, which means that the fill level may now be + * out of date. */ + if (unlikely(retry && (rc == 0))) + goto retry; + + out_unlock: + spin_unlock_bh(&rx_queue->add_lock); + + return rc; +} + +/** + * efx_fast_push_rx_descriptors - push new RX descriptors quickly + * @rx_queue: RX descriptor queue + * + * This will aim to fill the RX descriptor queue up to + * @rx_queue->@fast_fill_limit. If there is insufficient memory to do so, + * it will schedule a work item to immediately continue the fast fill + */ +void efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue) +{ + int rc; + + rc = __efx_fast_push_rx_descriptors(rx_queue, 0); + if (unlikely(rc)) { + /* Schedule the work item to run immediately. The hope is + * that work is immediately pending to free some memory + * (e.g. an RX event or TX completion) + */ + efx_schedule_slow_fill(rx_queue, 0); + } +} + +void efx_rx_work(struct work_struct *data) +{ + struct efx_rx_queue *rx_queue; + int rc; + + rx_queue = container_of(data, struct efx_rx_queue, work.work); + + if (unlikely(!rx_queue->channel->enabled)) + return; + + EFX_TRACE(rx_queue->efx, "RX queue %d worker thread executing on CPU " + "%d\n", rx_queue->queue, raw_smp_processor_id()); + + ++rx_queue->slow_fill_count; + /* Push new RX descriptors, allowing at least 1 jiffy for + * the kernel to free some more memory. */ + rc = __efx_fast_push_rx_descriptors(rx_queue, 1); + if (rc) + efx_schedule_slow_fill(rx_queue, 1); +} + +static inline void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf, + int len, int *discard, + int *leak_packet) +{ + struct efx_nic *efx = rx_queue->efx; + unsigned max_len = rx_buf->len - efx->type->rx_buffer_padding; + + if (likely(len <= max_len)) + return; + + /* The packet must be discarded, but this is only a fatal error + * if the caller indicated it was + */ + *discard = 1; + + if ((len > rx_buf->len) && EFX_WORKAROUND_8071(efx)) { + EFX_ERR_RL(efx, " RX queue %d seriously overlength " + "RX event (0x%x > 0x%x+0x%x). Leaking\n", + rx_queue->queue, len, max_len, + efx->type->rx_buffer_padding); + /* If this buffer was skb-allocated, then the meta + * data at the end of the skb will be trashed. So + * we have no choice but to leak the fragment. + */ + *leak_packet = (rx_buf->skb != NULL); + efx_schedule_reset(efx, RESET_TYPE_RX_RECOVERY); + } else { + EFX_ERR_RL(efx, " RX queue %d overlength RX event " + "(0x%x > 0x%x)\n", rx_queue->queue, len, max_len); + } + + rx_queue->channel->n_rx_overlength++; +} + +/* Pass a received packet up through the generic LRO stack + * + * Handles driverlink veto, and passes the fragment up via + * the appropriate LRO method + */ +static inline void efx_rx_packet_lro(struct efx_channel *channel, + struct efx_rx_buffer *rx_buf) +{ + struct net_lro_mgr *lro_mgr = &channel->lro_mgr; + void *priv = channel; + + /* Pass the skb/page into the LRO engine */ + if (rx_buf->page) { + struct skb_frag_struct frags; + + frags.page = rx_buf->page; + frags.page_offset = RX_BUF_OFFSET(rx_buf); + frags.size = rx_buf->len; + + lro_receive_frags(lro_mgr, &frags, rx_buf->len, + rx_buf->len, priv, 0); + + EFX_BUG_ON_PARANOID(rx_buf->skb); + rx_buf->page = NULL; + } else { + EFX_BUG_ON_PARANOID(!rx_buf->skb); + + lro_receive_skb(lro_mgr, rx_buf->skb, priv); + rx_buf->skb = NULL; + } +} + +/* Allocate and construct an SKB around a struct page.*/ +static inline struct sk_buff *efx_rx_mk_skb(struct efx_rx_buffer *rx_buf, + struct efx_nic *efx, + int hdr_len) +{ + struct sk_buff *skb; + + /* Allocate an SKB to store the headers */ + skb = netdev_alloc_skb(efx->net_dev, hdr_len + EFX_PAGE_SKB_ALIGN); + if (unlikely(skb == NULL)) { + EFX_ERR_RL(efx, "RX out of memory for skb\n"); + return NULL; + } + + EFX_BUG_ON_PARANOID(skb_shinfo(skb)->nr_frags); + EFX_BUG_ON_PARANOID(rx_buf->len < hdr_len); + + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb_reserve(skb, EFX_PAGE_SKB_ALIGN); + + skb->len = rx_buf->len; + skb->truesize = rx_buf->len + sizeof(struct sk_buff); + memcpy(skb->data, rx_buf->data, hdr_len); + skb->tail += hdr_len; + + /* Append the remaining page onto the frag list */ + if (unlikely(rx_buf->len > hdr_len)) { + struct skb_frag_struct *frag = skb_shinfo(skb)->frags; + frag->page = rx_buf->page; + frag->page_offset = RX_BUF_OFFSET(rx_buf) + hdr_len; + frag->size = skb->len - hdr_len; + skb_shinfo(skb)->nr_frags = 1; + skb->data_len = frag->size; + } else { + __free_pages(rx_buf->page, efx->rx_buffer_order); + skb->data_len = 0; + } + + /* Ownership has transferred from the rx_buf to skb */ + rx_buf->page = NULL; + + /* Move past the ethernet header */ + skb->protocol = eth_type_trans(skb, efx->net_dev); + + return skb; +} + +void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index, + unsigned int len, int checksummed, int discard) +{ + struct efx_nic *efx = rx_queue->efx; + struct efx_rx_buffer *rx_buf; + int leak_packet = 0; + + rx_buf = efx_rx_buffer(rx_queue, index); + EFX_BUG_ON_PARANOID(!rx_buf->data); + EFX_BUG_ON_PARANOID(rx_buf->skb && rx_buf->page); + EFX_BUG_ON_PARANOID(!(rx_buf->skb || rx_buf->page)); + + /* This allows the refill path to post another buffer. + * EFX_RXD_HEAD_ROOM ensures that the slot we are using + * isn't overwritten yet. + */ + rx_queue->removed_count++; + + /* Validate the length encoded in the event vs the descriptor pushed */ + efx_rx_packet__check_len(rx_queue, rx_buf, len, + &discard, &leak_packet); + + EFX_TRACE(efx, "RX queue %d received id %x at %llx+%x %s%s\n", + rx_queue->queue, index, + (unsigned long long)rx_buf->dma_addr, len, + (checksummed ? " [SUMMED]" : ""), + (discard ? " [DISCARD]" : "")); + + /* Discard packet, if instructed to do so */ + if (unlikely(discard)) { + if (unlikely(leak_packet)) + rx_queue->channel->n_skbuff_leaks++; + else + /* We haven't called efx_unmap_rx_buffer yet, + * so fini the entire rx_buffer here */ + efx_fini_rx_buffer(rx_queue, rx_buf); + return; + } + + /* Release card resources - assumes all RX buffers consumed in-order + * per RX queue + */ + efx_unmap_rx_buffer(efx, rx_buf); + + /* Prefetch nice and early so data will (hopefully) be in cache by + * the time we look at it. + */ + prefetch(rx_buf->data); + + /* Pipeline receives so that we give time for packet headers to be + * prefetched into cache. + */ + rx_buf->len = len; + if (rx_queue->channel->rx_pkt) + __efx_rx_packet(rx_queue->channel, + rx_queue->channel->rx_pkt, + rx_queue->channel->rx_pkt_csummed); + rx_queue->channel->rx_pkt = rx_buf; + rx_queue->channel->rx_pkt_csummed = checksummed; +} + +/* Handle a received packet. Second half: Touches packet payload. */ +void __efx_rx_packet(struct efx_channel *channel, + struct efx_rx_buffer *rx_buf, int checksummed) +{ + struct efx_nic *efx = channel->efx; + struct sk_buff *skb; + int lro = efx->net_dev->features & NETIF_F_LRO; + + if (rx_buf->skb) { + prefetch(skb_shinfo(rx_buf->skb)); + + skb_put(rx_buf->skb, rx_buf->len); + + /* Move past the ethernet header. rx_buf->data still points + * at the ethernet header */ + rx_buf->skb->protocol = eth_type_trans(rx_buf->skb, + efx->net_dev); + } + + /* Both our generic-LRO and SFC-SSR support skb and page based + * allocation, but neither support switching from one to the + * other on the fly. If we spot that the allocation mode has + * changed, then flush the LRO state. + */ + if (unlikely(channel->rx_alloc_pop_pages != (rx_buf->page != NULL))) { + efx_flush_lro(channel); + channel->rx_alloc_pop_pages = (rx_buf->page != NULL); + } + if (likely(checksummed && lro)) { + efx_rx_packet_lro(channel, rx_buf); + goto done; + } + + /* Form an skb if required */ + if (rx_buf->page) { + int hdr_len = min(rx_buf->len, EFX_SKB_HEADERS); + skb = efx_rx_mk_skb(rx_buf, efx, hdr_len); + if (unlikely(skb == NULL)) { + efx_free_rx_buffer(efx, rx_buf); + goto done; + } + } else { + /* We now own the SKB */ + skb = rx_buf->skb; + rx_buf->skb = NULL; + } + + EFX_BUG_ON_PARANOID(rx_buf->page); + EFX_BUG_ON_PARANOID(rx_buf->skb); + EFX_BUG_ON_PARANOID(!skb); + + /* Set the SKB flags */ + if (unlikely(!checksummed || !efx->rx_checksum_enabled)) + skb->ip_summed = CHECKSUM_NONE; + + /* Pass the packet up */ + netif_receive_skb(skb); + + /* Update allocation strategy method */ + channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB; + + /* fall-thru */ +done: + efx->net_dev->last_rx = jiffies; +} + +void efx_rx_strategy(struct efx_channel *channel) +{ + enum efx_rx_alloc_method method = rx_alloc_method; + + /* Only makes sense to use page based allocation if LRO is enabled */ + if (!(channel->efx->net_dev->features & NETIF_F_LRO)) { + method = RX_ALLOC_METHOD_SKB; + } else if (method == RX_ALLOC_METHOD_AUTO) { + /* Constrain the rx_alloc_level */ + if (channel->rx_alloc_level < 0) + channel->rx_alloc_level = 0; + else if (channel->rx_alloc_level > RX_ALLOC_LEVEL_MAX) + channel->rx_alloc_level = RX_ALLOC_LEVEL_MAX; + + /* Decide on the allocation method */ + method = ((channel->rx_alloc_level > RX_ALLOC_LEVEL_LRO) ? + RX_ALLOC_METHOD_PAGE : RX_ALLOC_METHOD_SKB); + } + + /* Push the option */ + channel->rx_alloc_push_pages = (method == RX_ALLOC_METHOD_PAGE); +} + +int efx_probe_rx_queue(struct efx_rx_queue *rx_queue) +{ + struct efx_nic *efx = rx_queue->efx; + unsigned int rxq_size; + int rc; + + EFX_LOG(efx, "creating RX queue %d\n", rx_queue->queue); + + /* Allocate RX buffers */ + rxq_size = (efx->type->rxd_ring_mask + 1) * sizeof(*rx_queue->buffer); + rx_queue->buffer = kzalloc(rxq_size, GFP_KERNEL); + if (!rx_queue->buffer) { + rc = -ENOMEM; + goto fail1; + } + + rc = falcon_probe_rx(rx_queue); + if (rc) + goto fail2; + + return 0; + + fail2: + kfree(rx_queue->buffer); + rx_queue->buffer = NULL; + fail1: + rx_queue->used = 0; + + return rc; +} + +int efx_init_rx_queue(struct efx_rx_queue *rx_queue) +{ + struct efx_nic *efx = rx_queue->efx; + unsigned int max_fill, trigger, limit; + + EFX_LOG(rx_queue->efx, "initialising RX queue %d\n", rx_queue->queue); + + /* Initialise ptr fields */ + rx_queue->added_count = 0; + rx_queue->notified_count = 0; + rx_queue->removed_count = 0; + rx_queue->min_fill = -1U; + rx_queue->min_overfill = -1U; + + /* Initialise limit fields */ + max_fill = efx->type->rxd_ring_mask + 1 - EFX_RXD_HEAD_ROOM; + trigger = max_fill * min(rx_refill_threshold, 100U) / 100U; + limit = max_fill * min(rx_refill_limit, 100U) / 100U; + + rx_queue->max_fill = max_fill; + rx_queue->fast_fill_trigger = trigger; + rx_queue->fast_fill_limit = limit; + + /* Set up RX descriptor ring */ + return falcon_init_rx(rx_queue); +} + +void efx_fini_rx_queue(struct efx_rx_queue *rx_queue) +{ + int i; + struct efx_rx_buffer *rx_buf; + + EFX_LOG(rx_queue->efx, "shutting down RX queue %d\n", rx_queue->queue); + + falcon_fini_rx(rx_queue); + + /* Release RX buffers NB start at index 0 not current HW ptr */ + if (rx_queue->buffer) { + for (i = 0; i <= rx_queue->efx->type->rxd_ring_mask; i++) { + rx_buf = efx_rx_buffer(rx_queue, i); + efx_fini_rx_buffer(rx_queue, rx_buf); + } + } + + /* For a page that is part-way through splitting into RX buffers */ + if (rx_queue->buf_page != NULL) { + pci_unmap_page(rx_queue->efx->pci_dev, rx_queue->buf_dma_addr, + RX_PAGE_SIZE(rx_queue->efx), PCI_DMA_FROMDEVICE); + __free_pages(rx_queue->buf_page, + rx_queue->efx->rx_buffer_order); + rx_queue->buf_page = NULL; + } +} + +void efx_remove_rx_queue(struct efx_rx_queue *rx_queue) +{ + EFX_LOG(rx_queue->efx, "destroying RX queue %d\n", rx_queue->queue); + + falcon_remove_rx(rx_queue); + + kfree(rx_queue->buffer); + rx_queue->buffer = NULL; + rx_queue->used = 0; +} + +void efx_flush_lro(struct efx_channel *channel) +{ + lro_flush_all(&channel->lro_mgr); +} + + +module_param(rx_alloc_method, int, 0644); +MODULE_PARM_DESC(rx_alloc_method, "Allocation method used for RX buffers"); + +module_param(rx_refill_threshold, uint, 0444); +MODULE_PARM_DESC(rx_refill_threshold, + "RX descriptor ring fast/slow fill threshold (%)"); + diff --git a/drivers/net/sfc/rx.h b/drivers/net/sfc/rx.h new file mode 100644 index 000000000000..f35e377bfc5f --- /dev/null +++ b/drivers/net/sfc/rx.h @@ -0,0 +1,29 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2006 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_RX_H +#define EFX_RX_H + +#include "net_driver.h" + +int efx_probe_rx_queue(struct efx_rx_queue *rx_queue); +void efx_remove_rx_queue(struct efx_rx_queue *rx_queue); +int efx_init_rx_queue(struct efx_rx_queue *rx_queue); +void efx_fini_rx_queue(struct efx_rx_queue *rx_queue); + +int efx_lro_init(struct net_lro_mgr *lro_mgr, struct efx_nic *efx); +void efx_lro_fini(struct net_lro_mgr *lro_mgr); +void efx_flush_lro(struct efx_channel *channel); +void efx_rx_strategy(struct efx_channel *channel); +void efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue); +void efx_rx_work(struct work_struct *data); +void __efx_rx_packet(struct efx_channel *channel, + struct efx_rx_buffer *rx_buf, int checksummed); + +#endif /* EFX_RX_H */ diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c new file mode 100644 index 000000000000..11fa9fb8f48b --- /dev/null +++ b/drivers/net/sfc/sfe4001.c @@ -0,0 +1,252 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2007 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +/***************************************************************************** + * Support for the SFE4001 NIC: driver code for the PCA9539 I/O expander that + * controls the PHY power rails, and for the MAX6647 temp. sensor used to check + * the PHY + */ +#include <linux/delay.h> +#include "efx.h" +#include "phy.h" +#include "boards.h" +#include "falcon.h" +#include "falcon_hwdefs.h" +#include "mac.h" + +/************************************************************************** + * + * I2C IO Expander device + * + **************************************************************************/ +#define PCA9539 0x74 + +#define P0_IN 0x00 +#define P0_OUT 0x02 +#define P0_INVERT 0x04 +#define P0_CONFIG 0x06 + +#define P0_EN_1V0X_LBN 0 +#define P0_EN_1V0X_WIDTH 1 +#define P0_EN_1V2_LBN 1 +#define P0_EN_1V2_WIDTH 1 +#define P0_EN_2V5_LBN 2 +#define P0_EN_2V5_WIDTH 1 +#define P0_EN_3V3X_LBN 3 +#define P0_EN_3V3X_WIDTH 1 +#define P0_EN_5V_LBN 4 +#define P0_EN_5V_WIDTH 1 +#define P0_SHORTEN_JTAG_LBN 5 +#define P0_SHORTEN_JTAG_WIDTH 1 +#define P0_X_TRST_LBN 6 +#define P0_X_TRST_WIDTH 1 +#define P0_DSP_RESET_LBN 7 +#define P0_DSP_RESET_WIDTH 1 + +#define P1_IN 0x01 +#define P1_OUT 0x03 +#define P1_INVERT 0x05 +#define P1_CONFIG 0x07 + +#define P1_AFE_PWD_LBN 0 +#define P1_AFE_PWD_WIDTH 1 +#define P1_DSP_PWD25_LBN 1 +#define P1_DSP_PWD25_WIDTH 1 +#define P1_RESERVED_LBN 2 +#define P1_RESERVED_WIDTH 2 +#define P1_SPARE_LBN 4 +#define P1_SPARE_WIDTH 4 + + +/************************************************************************** + * + * Temperature Sensor + * + **************************************************************************/ +#define MAX6647 0x4e + +#define RLTS 0x00 +#define RLTE 0x01 +#define RSL 0x02 +#define RCL 0x03 +#define RCRA 0x04 +#define RLHN 0x05 +#define RLLI 0x06 +#define RRHI 0x07 +#define RRLS 0x08 +#define WCRW 0x0a +#define WLHO 0x0b +#define WRHA 0x0c +#define WRLN 0x0e +#define OSHT 0x0f +#define REET 0x10 +#define RIET 0x11 +#define RWOE 0x19 +#define RWOI 0x20 +#define HYS 0x21 +#define QUEUE 0x22 +#define MFID 0xfe +#define REVID 0xff + +/* Status bits */ +#define MAX6647_BUSY (1 << 7) /* ADC is converting */ +#define MAX6647_LHIGH (1 << 6) /* Local high temp. alarm */ +#define MAX6647_LLOW (1 << 5) /* Local low temp. alarm */ +#define MAX6647_RHIGH (1 << 4) /* Remote high temp. alarm */ +#define MAX6647_RLOW (1 << 3) /* Remote low temp. alarm */ +#define MAX6647_FAULT (1 << 2) /* DXN/DXP short/open circuit */ +#define MAX6647_EOT (1 << 1) /* Remote junction overtemp. */ +#define MAX6647_IOT (1 << 0) /* Local junction overtemp. */ + +static const u8 xgphy_max_temperature = 90; + +void sfe4001_poweroff(struct efx_nic *efx) +{ + struct efx_i2c_interface *i2c = &efx->i2c; + + u8 cfg, out, in; + + EFX_INFO(efx, "%s\n", __func__); + + /* Turn off all power rails */ + out = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + + /* Disable port 1 outputs on IO expander */ + cfg = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + + /* Disable port 0 outputs on IO expander */ + cfg = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + + /* Clear any over-temperature alert */ + (void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1); +} + +/* This board uses an I2C expander to provider power to the PHY, which needs to + * be turned on before the PHY can be used. + * Context: Process context, rtnl lock held + */ +int sfe4001_poweron(struct efx_nic *efx) +{ + struct efx_i2c_interface *i2c = &efx->i2c; + unsigned int count; + int rc; + u8 out, in, cfg; + efx_dword_t reg; + + /* 10Xpress has fixed-function LED pins, so there is no board-specific + * blink code. */ + efx->board_info.blink = tenxpress_phy_blink; + + /* Ensure that XGXS and XAUI SerDes are held in reset */ + EFX_POPULATE_DWORD_7(reg, XX_PWRDNA_EN, 1, + XX_PWRDNB_EN, 1, + XX_RSTPLLAB_EN, 1, + XX_RESETA_EN, 1, + XX_RESETB_EN, 1, + XX_RSTXGXSRX_EN, 1, + XX_RSTXGXSTX_EN, 1); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + /* Set DSP over-temperature alert threshold */ + EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature); + rc = efx_i2c_write(i2c, MAX6647, WLHO, + &xgphy_max_temperature, 1); + if (rc) + goto fail1; + + /* Read it back and verify */ + rc = efx_i2c_read(i2c, MAX6647, RLHN, &in, 1); + if (rc) + goto fail1; + if (in != xgphy_max_temperature) { + rc = -EFAULT; + goto fail1; + } + + /* Clear any previous over-temperature alert */ + rc = efx_i2c_read(i2c, MAX6647, RSL, &in, 1); + if (rc) + goto fail1; + + /* Enable port 0 and port 1 outputs on IO expander */ + cfg = 0x00; + rc = efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + if (rc) + goto fail1; + cfg = 0xff & ~(1 << P1_SPARE_LBN); + rc = efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + if (rc) + goto fail2; + + /* Turn all power off then wait 1 sec. This ensures PHY is reset */ + out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) | + (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) | + (0 << P0_EN_1V0X_LBN)); + rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + if (rc) + goto fail3; + + schedule_timeout_uninterruptible(HZ); + count = 0; + do { + /* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */ + out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) | + (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) | + (1 << P0_X_TRST_LBN)); + + rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + if (rc) + goto fail3; + msleep(10); + + /* Turn on 1V power rail */ + out &= ~(1 << P0_EN_1V0X_LBN); + rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + if (rc) + goto fail3; + + EFX_INFO(efx, "waiting for power (attempt %d)...\n", count); + + schedule_timeout_uninterruptible(HZ); + + /* Check DSP is powered */ + rc = efx_i2c_read(i2c, PCA9539, P1_IN, &in, 1); + if (rc) + goto fail3; + if (in & (1 << P1_AFE_PWD_LBN)) + goto done; + + } while (++count < 20); + + EFX_INFO(efx, "timed out waiting for power\n"); + rc = -ETIMEDOUT; + goto fail3; + +done: + EFX_INFO(efx, "PHY is powered on\n"); + return 0; + +fail3: + /* Turn off all power rails */ + out = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + /* Disable port 1 outputs on IO expander */ + out = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); +fail2: + /* Disable port 0 outputs on IO expander */ + out = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); +fail1: + return rc; +} diff --git a/drivers/net/sfc/spi.h b/drivers/net/sfc/spi.h new file mode 100644 index 000000000000..34412f3d41c9 --- /dev/null +++ b/drivers/net/sfc/spi.h @@ -0,0 +1,71 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005 Fen Systems Ltd. + * Copyright 2006 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_SPI_H +#define EFX_SPI_H + +#include "net_driver.h" + +/************************************************************************** + * + * Basic SPI command set and bit definitions + * + *************************************************************************/ + +/* + * Commands common to all known devices. + * + */ + +/* Write status register */ +#define SPI_WRSR 0x01 + +/* Write data to memory array */ +#define SPI_WRITE 0x02 + +/* Read data from memory array */ +#define SPI_READ 0x03 + +/* Reset write enable latch */ +#define SPI_WRDI 0x04 + +/* Read status register */ +#define SPI_RDSR 0x05 + +/* Set write enable latch */ +#define SPI_WREN 0x06 + +/* SST: Enable write to status register */ +#define SPI_SST_EWSR 0x50 + +/* + * Status register bits. Not all bits are supported on all devices. + * + */ + +/* Write-protect pin enabled */ +#define SPI_STATUS_WPEN 0x80 + +/* Block protection bit 2 */ +#define SPI_STATUS_BP2 0x10 + +/* Block protection bit 1 */ +#define SPI_STATUS_BP1 0x08 + +/* Block protection bit 0 */ +#define SPI_STATUS_BP0 0x04 + +/* State of the write enable latch */ +#define SPI_STATUS_WEN 0x02 + +/* Device busy flag */ +#define SPI_STATUS_NRDY 0x01 + +#endif /* EFX_SPI_H */ diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c new file mode 100644 index 000000000000..a2e9f79e47b1 --- /dev/null +++ b/drivers/net/sfc/tenxpress.c @@ -0,0 +1,434 @@ +/**************************************************************************** + * Driver for Solarflare 802.3an compliant PHY + * Copyright 2007 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/delay.h> +#include <linux/seq_file.h> +#include "efx.h" +#include "gmii.h" +#include "mdio_10g.h" +#include "falcon.h" +#include "phy.h" +#include "falcon_hwdefs.h" +#include "boards.h" +#include "mac.h" + +/* We expect these MMDs to be in the package */ +/* AN not here as mdio_check_mmds() requires STAT2 support */ +#define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS0_PMAPMD | \ + MDIO_MMDREG_DEVS0_PCS | \ + MDIO_MMDREG_DEVS0_PHYXS) + +/* We complain if we fail to see the link partner as 10G capable this many + * times in a row (must be > 1 as sampling the autoneg. registers is racy) + */ +#define MAX_BAD_LP_TRIES (5) + +/* Extended control register */ +#define PMA_PMD_XCONTROL_REG 0xc000 +#define PMA_PMD_LNPGA_POWERDOWN_LBN 8 +#define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1 + +/* extended status register */ +#define PMA_PMD_XSTATUS_REG 0xc001 +#define PMA_PMD_XSTAT_FLP_LBN (12) + +/* LED control register */ +#define PMA_PMD_LED_CTRL_REG (0xc007) +#define PMA_PMA_LED_ACTIVITY_LBN (3) + +/* LED function override register */ +#define PMA_PMD_LED_OVERR_REG (0xc009) +/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/ +#define PMA_PMD_LED_LINK_LBN (0) +#define PMA_PMD_LED_SPEED_LBN (2) +#define PMA_PMD_LED_TX_LBN (4) +#define PMA_PMD_LED_RX_LBN (6) +/* Override settings */ +#define PMA_PMD_LED_AUTO (0) /* H/W control */ +#define PMA_PMD_LED_ON (1) +#define PMA_PMD_LED_OFF (2) +#define PMA_PMD_LED_FLASH (3) +/* All LEDs under hardware control */ +#define PMA_PMD_LED_FULL_AUTO (0) +/* Green and Amber under hardware control, Red off */ +#define PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) + + +/* Self test (BIST) control register */ +#define PMA_PMD_BIST_CTRL_REG (0xc014) +#define PMA_PMD_BIST_BER_LBN (2) /* Run BER test */ +#define PMA_PMD_BIST_CONT_LBN (1) /* Run continuous BIST until cleared */ +#define PMA_PMD_BIST_SINGLE_LBN (0) /* Run 1 BIST iteration (self clears) */ +/* Self test status register */ +#define PMA_PMD_BIST_STAT_REG (0xc015) +#define PMA_PMD_BIST_ENX_LBN (3) +#define PMA_PMD_BIST_PMA_LBN (2) +#define PMA_PMD_BIST_RXD_LBN (1) +#define PMA_PMD_BIST_AFE_LBN (0) + +#define BIST_MAX_DELAY (1000) +#define BIST_POLL_DELAY (10) + +/* Misc register defines */ +#define PCS_CLOCK_CTRL_REG 0xd801 +#define PLL312_RST_N_LBN 2 + +#define PCS_SOFT_RST2_REG 0xd806 +#define SERDES_RST_N_LBN 13 +#define XGXS_RST_N_LBN 12 + +#define PCS_TEST_SELECT_REG 0xd807 /* PRM 10.5.8 */ +#define CLK312_EN_LBN 3 + +/* Boot status register */ +#define PCS_BOOT_STATUS_REG (0xd000) +#define PCS_BOOT_FATAL_ERR_LBN (0) +#define PCS_BOOT_PROGRESS_LBN (1) +#define PCS_BOOT_PROGRESS_WIDTH (2) +#define PCS_BOOT_COMPLETE_LBN (3) +#define PCS_BOOT_MAX_DELAY (100) +#define PCS_BOOT_POLL_DELAY (10) + +/* Time to wait between powering down the LNPGA and turning off the power + * rails */ +#define LNPGA_PDOWN_WAIT (HZ / 5) + +static int crc_error_reset_threshold = 100; +module_param(crc_error_reset_threshold, int, 0644); +MODULE_PARM_DESC(crc_error_reset_threshold, + "Max number of CRC errors before XAUI reset"); + +struct tenxpress_phy_data { + enum tenxpress_state state; + atomic_t bad_crc_count; + int bad_lp_tries; +}; + +static int tenxpress_state_is(struct efx_nic *efx, int state) +{ + struct tenxpress_phy_data *phy_data = efx->phy_data; + return (phy_data != NULL) && (state == phy_data->state); +} + +void tenxpress_set_state(struct efx_nic *efx, + enum tenxpress_state state) +{ + struct tenxpress_phy_data *phy_data = efx->phy_data; + if (phy_data != NULL) + phy_data->state = state; +} + +void tenxpress_crc_err(struct efx_nic *efx) +{ + struct tenxpress_phy_data *phy_data = efx->phy_data; + if (phy_data != NULL) + atomic_inc(&phy_data->bad_crc_count); +} + +/* Check that the C166 has booted successfully */ +static int tenxpress_phy_check(struct efx_nic *efx) +{ + int phy_id = efx->mii.phy_id; + int count = PCS_BOOT_MAX_DELAY / PCS_BOOT_POLL_DELAY; + int boot_stat; + + /* Wait for the boot to complete (or not) */ + while (count) { + boot_stat = mdio_clause45_read(efx, phy_id, + MDIO_MMD_PCS, + PCS_BOOT_STATUS_REG); + if (boot_stat & (1 << PCS_BOOT_COMPLETE_LBN)) + break; + count--; + udelay(PCS_BOOT_POLL_DELAY); + } + + if (!count) { + EFX_ERR(efx, "%s: PHY boot timed out. Last status " + "%x\n", __func__, + (boot_stat >> PCS_BOOT_PROGRESS_LBN) & + ((1 << PCS_BOOT_PROGRESS_WIDTH) - 1)); + return -ETIMEDOUT; + } + + return 0; +} + +static void tenxpress_reset_xaui(struct efx_nic *efx); + +static int tenxpress_init(struct efx_nic *efx) +{ + int rc, reg; + + /* Turn on the clock */ + reg = (1 << CLK312_EN_LBN); + mdio_clause45_write(efx, efx->mii.phy_id, + MDIO_MMD_PCS, PCS_TEST_SELECT_REG, reg); + + rc = tenxpress_phy_check(efx); + if (rc < 0) + return rc; + + /* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */ + reg = mdio_clause45_read(efx, efx->mii.phy_id, + MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG); + reg |= (1 << PMA_PMA_LED_ACTIVITY_LBN); + mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, + PMA_PMD_LED_CTRL_REG, reg); + + reg = PMA_PMD_LED_DEFAULT; + mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, + PMA_PMD_LED_OVERR_REG, reg); + + return rc; +} + +static int tenxpress_phy_init(struct efx_nic *efx) +{ + struct tenxpress_phy_data *phy_data; + int rc = 0; + + phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + efx->phy_data = phy_data; + + tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL); + + rc = mdio_clause45_wait_reset_mmds(efx, + TENXPRESS_REQUIRED_DEVS); + if (rc < 0) + goto fail; + + rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0); + if (rc < 0) + goto fail; + + rc = tenxpress_init(efx); + if (rc < 0) + goto fail; + + schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ + + /* Let XGXS and SerDes out of reset and resets 10XPress */ + falcon_reset_xaui(efx); + + return 0; + + fail: + kfree(efx->phy_data); + efx->phy_data = NULL; + return rc; +} + +static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp) +{ + struct tenxpress_phy_data *pd = efx->phy_data; + int reg; + + /* Nothing to do if all is well and was previously so. */ + if (!(bad_lp || pd->bad_lp_tries)) + return; + + reg = mdio_clause45_read(efx, efx->mii.phy_id, + MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG); + + if (bad_lp) + pd->bad_lp_tries++; + else + pd->bad_lp_tries = 0; + + if (pd->bad_lp_tries == MAX_BAD_LP_TRIES) { + pd->bad_lp_tries = 0; /* Restart count */ + reg &= ~(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN); + reg |= (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN); + EFX_ERR(efx, "This NIC appears to be plugged into" + " a port that is not 10GBASE-T capable.\n" + " This PHY is 10GBASE-T ONLY, so no link can" + " be established.\n"); + } else { + reg |= (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN); + } + mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, + PMA_PMD_LED_OVERR_REG, reg); +} + +/* Check link status and return a boolean OK value. If the link is NOT + * OK we have a quick rummage round to see if we appear to be plugged + * into a non-10GBT port and if so warn the user that they won't get + * link any time soon as we are 10GBT only, unless caller specified + * not to do this check (it isn't useful in loopback) */ +static int tenxpress_link_ok(struct efx_nic *efx, int check_lp) +{ + int ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS); + + if (ok) { + tenxpress_set_bad_lp(efx, 0); + } else if (check_lp) { + /* Are we plugged into the wrong sort of link? */ + int bad_lp = 0; + int phy_id = efx->mii.phy_id; + int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_STATUS); + int xphy_stat = mdio_clause45_read(efx, phy_id, + MDIO_MMD_PMAPMD, + PMA_PMD_XSTATUS_REG); + /* Are we plugged into anything that sends FLPs? If + * not we can't distinguish between not being plugged + * in and being plugged into a non-AN antique. The FLP + * bit has the advantage of not clearing when autoneg + * restarts. */ + if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) { + tenxpress_set_bad_lp(efx, 0); + return ok; + } + + /* If it can do 10GBT it must be XNP capable */ + bad_lp = !(an_stat & (1 << MDIO_AN_STATUS_XNP_LBN)); + if (!bad_lp && (an_stat & (1 << MDIO_AN_STATUS_PAGE_LBN))) { + bad_lp = !(mdio_clause45_read(efx, phy_id, + MDIO_MMD_AN, MDIO_AN_10GBT_STATUS) & + (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN)); + } + tenxpress_set_bad_lp(efx, bad_lp); + } + return ok; +} + +static void tenxpress_phy_reconfigure(struct efx_nic *efx) +{ + if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL)) + return; + + efx->link_up = tenxpress_link_ok(efx, 0); + efx->link_options = GM_LPA_10000FULL; +} + +static void tenxpress_phy_clear_interrupt(struct efx_nic *efx) +{ + /* Nothing done here - LASI interrupts aren't reliable so poll */ +} + + +/* Poll PHY for interrupt */ +static int tenxpress_phy_check_hw(struct efx_nic *efx) +{ + struct tenxpress_phy_data *phy_data = efx->phy_data; + int phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL); + int link_ok; + + link_ok = phy_up && tenxpress_link_ok(efx, 1); + + if (link_ok != efx->link_up) + falcon_xmac_sim_phy_event(efx); + + /* Nothing to check if we've already shut down the PHY */ + if (!phy_up) + return 0; + + if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) { + EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n"); + falcon_reset_xaui(efx); + atomic_set(&phy_data->bad_crc_count, 0); + } + + return 0; +} + +static void tenxpress_phy_fini(struct efx_nic *efx) +{ + int reg; + + /* Power down the LNPGA */ + reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); + mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, + PMA_PMD_XCONTROL_REG, reg); + + /* Waiting here ensures that the board fini, which can turn off the + * power to the PHY, won't get run until the LNPGA powerdown has been + * given long enough to complete. */ + schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ + + kfree(efx->phy_data); + efx->phy_data = NULL; +} + + +/* Set the RX and TX LEDs and Link LED flashing. The other LEDs + * (which probably aren't wired anyway) are left in AUTO mode */ +void tenxpress_phy_blink(struct efx_nic *efx, int blink) +{ + int reg; + + if (blink) + reg = (PMA_PMD_LED_FLASH << PMA_PMD_LED_TX_LBN) | + (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN) | + (PMA_PMD_LED_FLASH << PMA_PMD_LED_LINK_LBN); + else + reg = PMA_PMD_LED_DEFAULT; + + mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, + PMA_PMD_LED_OVERR_REG, reg); +} + +static void tenxpress_reset_xaui(struct efx_nic *efx) +{ + int phy = efx->mii.phy_id; + int clk_ctrl, test_select, soft_rst2; + + /* Real work is done on clock_ctrl other resets are thought to be + * optional but make the reset more reliable + */ + + /* Read */ + clk_ctrl = mdio_clause45_read(efx, phy, MDIO_MMD_PCS, + PCS_CLOCK_CTRL_REG); + test_select = mdio_clause45_read(efx, phy, MDIO_MMD_PCS, + PCS_TEST_SELECT_REG); + soft_rst2 = mdio_clause45_read(efx, phy, MDIO_MMD_PCS, + PCS_SOFT_RST2_REG); + + /* Put in reset */ + test_select &= ~(1 << CLK312_EN_LBN); + mdio_clause45_write(efx, phy, MDIO_MMD_PCS, + PCS_TEST_SELECT_REG, test_select); + + soft_rst2 &= ~((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN)); + mdio_clause45_write(efx, phy, MDIO_MMD_PCS, + PCS_SOFT_RST2_REG, soft_rst2); + + clk_ctrl &= ~(1 << PLL312_RST_N_LBN); + mdio_clause45_write(efx, phy, MDIO_MMD_PCS, + PCS_CLOCK_CTRL_REG, clk_ctrl); + udelay(10); + + /* Remove reset */ + clk_ctrl |= (1 << PLL312_RST_N_LBN); + mdio_clause45_write(efx, phy, MDIO_MMD_PCS, + PCS_CLOCK_CTRL_REG, clk_ctrl); + udelay(10); + + soft_rst2 |= ((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN)); + mdio_clause45_write(efx, phy, MDIO_MMD_PCS, + PCS_SOFT_RST2_REG, soft_rst2); + udelay(10); + + test_select |= (1 << CLK312_EN_LBN); + mdio_clause45_write(efx, phy, MDIO_MMD_PCS, + PCS_TEST_SELECT_REG, test_select); + udelay(10); +} + +struct efx_phy_operations falcon_tenxpress_phy_ops = { + .init = tenxpress_phy_init, + .reconfigure = tenxpress_phy_reconfigure, + .check_hw = tenxpress_phy_check_hw, + .fini = tenxpress_phy_fini, + .clear_interrupt = tenxpress_phy_clear_interrupt, + .reset_xaui = tenxpress_reset_xaui, + .mmds = TENXPRESS_REQUIRED_DEVS, +}; diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c new file mode 100644 index 000000000000..fbb866b2185e --- /dev/null +++ b/drivers/net/sfc/tx.c @@ -0,0 +1,452 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2005-2006 Fen Systems Ltd. + * Copyright 2005-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/pci.h> +#include <linux/tcp.h> +#include <linux/ip.h> +#include <linux/in.h> +#include <linux/if_ether.h> +#include <linux/highmem.h> +#include "net_driver.h" +#include "tx.h" +#include "efx.h" +#include "falcon.h" +#include "workarounds.h" + +/* + * TX descriptor ring full threshold + * + * The tx_queue descriptor ring fill-level must fall below this value + * before we restart the netif queue + */ +#define EFX_NETDEV_TX_THRESHOLD(_tx_queue) \ + (_tx_queue->efx->type->txd_ring_mask / 2u) + +/* We want to be able to nest calls to netif_stop_queue(), since each + * channel can have an individual stop on the queue. + */ +void efx_stop_queue(struct efx_nic *efx) +{ + spin_lock_bh(&efx->netif_stop_lock); + EFX_TRACE(efx, "stop TX queue\n"); + + atomic_inc(&efx->netif_stop_count); + netif_stop_queue(efx->net_dev); + + spin_unlock_bh(&efx->netif_stop_lock); +} + +/* Wake netif's TX queue + * We want to be able to nest calls to netif_stop_queue(), since each + * channel can have an individual stop on the queue. + */ +inline void efx_wake_queue(struct efx_nic *efx) +{ + local_bh_disable(); + if (atomic_dec_and_lock(&efx->netif_stop_count, + &efx->netif_stop_lock)) { + EFX_TRACE(efx, "waking TX queue\n"); + netif_wake_queue(efx->net_dev); + spin_unlock(&efx->netif_stop_lock); + } + local_bh_enable(); +} + +static inline void efx_dequeue_buffer(struct efx_tx_queue *tx_queue, + struct efx_tx_buffer *buffer) +{ + if (buffer->unmap_len) { + struct pci_dev *pci_dev = tx_queue->efx->pci_dev; + if (buffer->unmap_single) + pci_unmap_single(pci_dev, buffer->unmap_addr, + buffer->unmap_len, PCI_DMA_TODEVICE); + else + pci_unmap_page(pci_dev, buffer->unmap_addr, + buffer->unmap_len, PCI_DMA_TODEVICE); + buffer->unmap_len = 0; + buffer->unmap_single = 0; + } + + if (buffer->skb) { + dev_kfree_skb_any((struct sk_buff *) buffer->skb); + buffer->skb = NULL; + EFX_TRACE(tx_queue->efx, "TX queue %d transmission id %x " + "complete\n", tx_queue->queue, read_ptr); + } +} + + +/* + * Add a socket buffer to a TX queue + * + * This maps all fragments of a socket buffer for DMA and adds them to + * the TX queue. The queue's insert pointer will be incremented by + * the number of fragments in the socket buffer. + * + * If any DMA mapping fails, any mapped fragments will be unmapped, + * the queue's insert pointer will be restored to its original value. + * + * Returns NETDEV_TX_OK or NETDEV_TX_BUSY + * You must hold netif_tx_lock() to call this function. + */ +static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, + const struct sk_buff *skb) +{ + struct efx_nic *efx = tx_queue->efx; + struct pci_dev *pci_dev = efx->pci_dev; + struct efx_tx_buffer *buffer; + skb_frag_t *fragment; + struct page *page; + int page_offset; + unsigned int len, unmap_len = 0, fill_level, insert_ptr, misalign; + dma_addr_t dma_addr, unmap_addr = 0; + unsigned int dma_len; + unsigned unmap_single; + int q_space, i = 0; + int rc = NETDEV_TX_OK; + + EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count); + + /* Get size of the initial fragment */ + len = skb_headlen(skb); + + fill_level = tx_queue->insert_count - tx_queue->old_read_count; + q_space = efx->type->txd_ring_mask - 1 - fill_level; + + /* Map for DMA. Use pci_map_single rather than pci_map_page + * since this is more efficient on machines with sparse + * memory. + */ + unmap_single = 1; + dma_addr = pci_map_single(pci_dev, skb->data, len, PCI_DMA_TODEVICE); + + /* Process all fragments */ + while (1) { + if (unlikely(pci_dma_mapping_error(dma_addr))) + goto pci_err; + + /* Store fields for marking in the per-fragment final + * descriptor */ + unmap_len = len; + unmap_addr = dma_addr; + + /* Add to TX queue, splitting across DMA boundaries */ + do { + if (unlikely(q_space-- <= 0)) { + /* It might be that completions have + * happened since the xmit path last + * checked. Update the xmit path's + * copy of read_count. + */ + ++tx_queue->stopped; + /* This memory barrier protects the + * change of stopped from the access + * of read_count. */ + smp_mb(); + tx_queue->old_read_count = + *(volatile unsigned *) + &tx_queue->read_count; + fill_level = (tx_queue->insert_count + - tx_queue->old_read_count); + q_space = (efx->type->txd_ring_mask - 1 - + fill_level); + if (unlikely(q_space-- <= 0)) + goto stop; + smp_mb(); + --tx_queue->stopped; + } + + insert_ptr = (tx_queue->insert_count & + efx->type->txd_ring_mask); + buffer = &tx_queue->buffer[insert_ptr]; + EFX_BUG_ON_PARANOID(buffer->skb); + EFX_BUG_ON_PARANOID(buffer->len); + EFX_BUG_ON_PARANOID(buffer->continuation != 1); + EFX_BUG_ON_PARANOID(buffer->unmap_len); + + dma_len = (((~dma_addr) & efx->type->tx_dma_mask) + 1); + if (likely(dma_len > len)) + dma_len = len; + + misalign = (unsigned)dma_addr & efx->type->bug5391_mask; + if (misalign && dma_len + misalign > 512) + dma_len = 512 - misalign; + + /* Fill out per descriptor fields */ + buffer->len = dma_len; + buffer->dma_addr = dma_addr; + len -= dma_len; + dma_addr += dma_len; + ++tx_queue->insert_count; + } while (len); + + /* Transfer ownership of the unmapping to the final buffer */ + buffer->unmap_addr = unmap_addr; + buffer->unmap_single = unmap_single; + buffer->unmap_len = unmap_len; + unmap_len = 0; + + /* Get address and size of next fragment */ + if (i >= skb_shinfo(skb)->nr_frags) + break; + fragment = &skb_shinfo(skb)->frags[i]; + len = fragment->size; + page = fragment->page; + page_offset = fragment->page_offset; + i++; + /* Map for DMA */ + unmap_single = 0; + dma_addr = pci_map_page(pci_dev, page, page_offset, len, + PCI_DMA_TODEVICE); + } + + /* Transfer ownership of the skb to the final buffer */ + buffer->skb = skb; + buffer->continuation = 0; + + /* Pass off to hardware */ + falcon_push_buffers(tx_queue); + + return NETDEV_TX_OK; + + pci_err: + EFX_ERR_RL(efx, " TX queue %d could not map skb with %d bytes %d " + "fragments for DMA\n", tx_queue->queue, skb->len, + skb_shinfo(skb)->nr_frags + 1); + + /* Mark the packet as transmitted, and free the SKB ourselves */ + dev_kfree_skb_any((struct sk_buff *)skb); + goto unwind; + + stop: + rc = NETDEV_TX_BUSY; + + if (tx_queue->stopped == 1) + efx_stop_queue(efx); + + unwind: + /* Work backwards until we hit the original insert pointer value */ + while (tx_queue->insert_count != tx_queue->write_count) { + --tx_queue->insert_count; + insert_ptr = tx_queue->insert_count & efx->type->txd_ring_mask; + buffer = &tx_queue->buffer[insert_ptr]; + efx_dequeue_buffer(tx_queue, buffer); + buffer->len = 0; + } + + /* Free the fragment we were mid-way through pushing */ + if (unmap_len) + pci_unmap_page(pci_dev, unmap_addr, unmap_len, + PCI_DMA_TODEVICE); + + return rc; +} + +/* Remove packets from the TX queue + * + * This removes packets from the TX queue, up to and including the + * specified index. + */ +static inline void efx_dequeue_buffers(struct efx_tx_queue *tx_queue, + unsigned int index) +{ + struct efx_nic *efx = tx_queue->efx; + unsigned int stop_index, read_ptr; + unsigned int mask = tx_queue->efx->type->txd_ring_mask; + + stop_index = (index + 1) & mask; + read_ptr = tx_queue->read_count & mask; + + while (read_ptr != stop_index) { + struct efx_tx_buffer *buffer = &tx_queue->buffer[read_ptr]; + if (unlikely(buffer->len == 0)) { + EFX_ERR(tx_queue->efx, "TX queue %d spurious TX " + "completion id %x\n", tx_queue->queue, + read_ptr); + efx_schedule_reset(efx, RESET_TYPE_TX_SKIP); + return; + } + + efx_dequeue_buffer(tx_queue, buffer); + buffer->continuation = 1; + buffer->len = 0; + + ++tx_queue->read_count; + read_ptr = tx_queue->read_count & mask; + } +} + +/* Initiate a packet transmission on the specified TX queue. + * Note that returning anything other than NETDEV_TX_OK will cause the + * OS to free the skb. + * + * This function is split out from efx_hard_start_xmit to allow the + * loopback test to direct packets via specific TX queues. It is + * therefore a non-static inline, so as not to penalise performance + * for non-loopback transmissions. + * + * Context: netif_tx_lock held + */ +inline int efx_xmit(struct efx_nic *efx, + struct efx_tx_queue *tx_queue, struct sk_buff *skb) +{ + int rc; + + /* Map fragments for DMA and add to TX queue */ + rc = efx_enqueue_skb(tx_queue, skb); + if (unlikely(rc != NETDEV_TX_OK)) + goto out; + + /* Update last TX timer */ + efx->net_dev->trans_start = jiffies; + + out: + return rc; +} + +/* Initiate a packet transmission. We use one channel per CPU + * (sharing when we have more CPUs than channels). On Falcon, the TX + * completion events will be directed back to the CPU that transmitted + * the packet, which should be cache-efficient. + * + * Context: non-blocking. + * Note that returning anything other than NETDEV_TX_OK will cause the + * OS to free the skb. + */ +int efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev) +{ + struct efx_nic *efx = net_dev->priv; + return efx_xmit(efx, &efx->tx_queue[0], skb); +} + +void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index) +{ + unsigned fill_level; + struct efx_nic *efx = tx_queue->efx; + + EFX_BUG_ON_PARANOID(index > efx->type->txd_ring_mask); + + efx_dequeue_buffers(tx_queue, index); + + /* See if we need to restart the netif queue. This barrier + * separates the update of read_count from the test of + * stopped. */ + smp_mb(); + if (unlikely(tx_queue->stopped)) { + fill_level = tx_queue->insert_count - tx_queue->read_count; + if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) { + EFX_BUG_ON_PARANOID(!NET_DEV_REGISTERED(efx)); + + /* Do this under netif_tx_lock(), to avoid racing + * with efx_xmit(). */ + netif_tx_lock(efx->net_dev); + if (tx_queue->stopped) { + tx_queue->stopped = 0; + efx_wake_queue(efx); + } + netif_tx_unlock(efx->net_dev); + } + } +} + +int efx_probe_tx_queue(struct efx_tx_queue *tx_queue) +{ + struct efx_nic *efx = tx_queue->efx; + unsigned int txq_size; + int i, rc; + + EFX_LOG(efx, "creating TX queue %d\n", tx_queue->queue); + + /* Allocate software ring */ + txq_size = (efx->type->txd_ring_mask + 1) * sizeof(*tx_queue->buffer); + tx_queue->buffer = kzalloc(txq_size, GFP_KERNEL); + if (!tx_queue->buffer) { + rc = -ENOMEM; + goto fail1; + } + for (i = 0; i <= efx->type->txd_ring_mask; ++i) + tx_queue->buffer[i].continuation = 1; + + /* Allocate hardware ring */ + rc = falcon_probe_tx(tx_queue); + if (rc) + goto fail2; + + return 0; + + fail2: + kfree(tx_queue->buffer); + tx_queue->buffer = NULL; + fail1: + tx_queue->used = 0; + + return rc; +} + +int efx_init_tx_queue(struct efx_tx_queue *tx_queue) +{ + EFX_LOG(tx_queue->efx, "initialising TX queue %d\n", tx_queue->queue); + + tx_queue->insert_count = 0; + tx_queue->write_count = 0; + tx_queue->read_count = 0; + tx_queue->old_read_count = 0; + BUG_ON(tx_queue->stopped); + + /* Set up TX descriptor ring */ + return falcon_init_tx(tx_queue); +} + +void efx_release_tx_buffers(struct efx_tx_queue *tx_queue) +{ + struct efx_tx_buffer *buffer; + + if (!tx_queue->buffer) + return; + + /* Free any buffers left in the ring */ + while (tx_queue->read_count != tx_queue->write_count) { + buffer = &tx_queue->buffer[tx_queue->read_count & + tx_queue->efx->type->txd_ring_mask]; + efx_dequeue_buffer(tx_queue, buffer); + buffer->continuation = 1; + buffer->len = 0; + + ++tx_queue->read_count; + } +} + +void efx_fini_tx_queue(struct efx_tx_queue *tx_queue) +{ + EFX_LOG(tx_queue->efx, "shutting down TX queue %d\n", tx_queue->queue); + + /* Flush TX queue, remove descriptor ring */ + falcon_fini_tx(tx_queue); + + efx_release_tx_buffers(tx_queue); + + /* Release queue's stop on port, if any */ + if (tx_queue->stopped) { + tx_queue->stopped = 0; + efx_wake_queue(tx_queue->efx); + } +} + +void efx_remove_tx_queue(struct efx_tx_queue *tx_queue) +{ + EFX_LOG(tx_queue->efx, "destroying TX queue %d\n", tx_queue->queue); + falcon_remove_tx(tx_queue); + + kfree(tx_queue->buffer); + tx_queue->buffer = NULL; + tx_queue->used = 0; +} + + diff --git a/drivers/net/sfc/tx.h b/drivers/net/sfc/tx.h new file mode 100644 index 000000000000..1526a73b4b51 --- /dev/null +++ b/drivers/net/sfc/tx.h @@ -0,0 +1,24 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2006 Fen Systems Ltd. + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_TX_H +#define EFX_TX_H + +#include "net_driver.h" + +int efx_probe_tx_queue(struct efx_tx_queue *tx_queue); +void efx_remove_tx_queue(struct efx_tx_queue *tx_queue); +int efx_init_tx_queue(struct efx_tx_queue *tx_queue); +void efx_fini_tx_queue(struct efx_tx_queue *tx_queue); + +int efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev); +void efx_release_tx_buffers(struct efx_tx_queue *tx_queue); + +#endif /* EFX_TX_H */ diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h new file mode 100644 index 000000000000..dca62f190198 --- /dev/null +++ b/drivers/net/sfc/workarounds.h @@ -0,0 +1,56 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_WORKAROUNDS_H +#define EFX_WORKAROUNDS_H + +/* + * Hardware workarounds. + * Bug numbers are from Solarflare's Bugzilla. + */ + +#define EFX_WORKAROUND_ALWAYS(efx) 1 +#define EFX_WORKAROUND_FALCON_A(efx) (FALCON_REV(efx) <= FALCON_REV_A1) + +/* XAUI resets if link not detected */ +#define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS +/* SNAP frames have TOBE_DISC set */ +#define EFX_WORKAROUND_5475 EFX_WORKAROUND_ALWAYS +/* RX PCIe double split performance issue */ +#define EFX_WORKAROUND_7575 EFX_WORKAROUND_ALWAYS +/* TX pkt parser problem with <= 16 byte TXes */ +#define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS +/* XGXS and XAUI reset sequencing in SW */ +#define EFX_WORKAROUND_9388 EFX_WORKAROUND_ALWAYS +/* Low rate CRC errors require XAUI reset */ +#define EFX_WORKAROUND_10750 EFX_WORKAROUND_ALWAYS +/* TX_EV_PKT_ERR can be caused by a dangling TX descriptor + * or a PCIe error (bug 11028) */ +#define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS +/* Transmit flow control may get disabled */ +#define EFX_WORKAROUND_11482 EFX_WORKAROUND_ALWAYS +/* Flush events can take a very long time to appear */ +#define EFX_WORKAROUND_11557 EFX_WORKAROUND_ALWAYS + +/* Spurious parity errors in TSORT buffers */ +#define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A +/* iSCSI parsing errors */ +#define EFX_WORKAROUND_5583 EFX_WORKAROUND_FALCON_A +/* RX events go missing */ +#define EFX_WORKAROUND_5676 EFX_WORKAROUND_FALCON_A +/* RX_RESET on A1 */ +#define EFX_WORKAROUND_6555 EFX_WORKAROUND_FALCON_A +/* Increase filter depth to avoid RX_RESET */ +#define EFX_WORKAROUND_7244 EFX_WORKAROUND_FALCON_A +/* Flushes may never complete */ +#define EFX_WORKAROUND_7803 EFX_WORKAROUND_FALCON_A +/* Leak overlength packets rather than free */ +#define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A + +#endif /* EFX_WORKAROUNDS_H */ diff --git a/drivers/net/sfc/xenpack.h b/drivers/net/sfc/xenpack.h new file mode 100644 index 000000000000..b0d1f225b70a --- /dev/null +++ b/drivers/net/sfc/xenpack.h @@ -0,0 +1,62 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2006 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef EFX_XENPACK_H +#define EFX_XENPACK_H + +/* Exported functions from Xenpack standard PHY control */ + +#include "mdio_10g.h" + +/****************************************************************************/ +/* XENPACK MDIO register extensions */ +#define MDIO_XP_LASI_RX_CTRL (0x9000) +#define MDIO_XP_LASI_TX_CTRL (0x9001) +#define MDIO_XP_LASI_CTRL (0x9002) +#define MDIO_XP_LASI_RX_STAT (0x9003) +#define MDIO_XP_LASI_TX_STAT (0x9004) +#define MDIO_XP_LASI_STAT (0x9005) + +/* Control/Status bits */ +#define XP_LASI_LS_ALARM (1 << 0) +#define XP_LASI_TX_ALARM (1 << 1) +#define XP_LASI_RX_ALARM (1 << 2) +/* These two are Quake vendor extensions to the standard XENPACK defines */ +#define XP_LASI_LS_INTB (1 << 3) +#define XP_LASI_TEST (1 << 7) + +/* Enable LASI interrupts for PHY */ +static inline void xenpack_enable_lasi_irqs(struct efx_nic *efx) +{ + int reg; + int phy_id = efx->mii.phy_id; + /* Read to clear LASI status register */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_XP_LASI_STAT); + + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_XP_LASI_CTRL, XP_LASI_LS_ALARM); +} + +/* Read the LASI interrupt status to clear the interrupt. */ +static inline int xenpack_clear_lasi_irqs(struct efx_nic *efx) +{ + /* Read to clear link status alarm */ + return mdio_clause45_read(efx, efx->mii.phy_id, + MDIO_MMD_PMAPMD, MDIO_XP_LASI_STAT); +} + +/* Turn off LASI interrupts */ +static inline void xenpack_disable_lasi_irqs(struct efx_nic *efx) +{ + mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, + MDIO_XP_LASI_CTRL, 0); +} + +#endif /* EFX_XENPACK_H */ diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c new file mode 100644 index 000000000000..66dd5bf1eaa9 --- /dev/null +++ b/drivers/net/sfc/xfp_phy.c @@ -0,0 +1,132 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2006-2008 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ +/* + * Driver for XFP optical PHYs (plus some support specific to the Quake 2032) + * See www.amcc.com for details (search for qt2032) + */ + +#include <linux/timer.h> +#include <linux/delay.h> +#include "efx.h" +#include "gmii.h" +#include "mdio_10g.h" +#include "xenpack.h" +#include "phy.h" +#include "mac.h" + +#define XFP_REQUIRED_DEVS (MDIO_MMDREG_DEVS0_PCS | \ + MDIO_MMDREG_DEVS0_PMAPMD | \ + MDIO_MMDREG_DEVS0_PHYXS) + +/****************************************************************************/ +/* Quake-specific MDIO registers */ +#define MDIO_QUAKE_LED0_REG (0xD006) + +void xfp_set_led(struct efx_nic *p, int led, int mode) +{ + int addr = MDIO_QUAKE_LED0_REG + led; + mdio_clause45_write(p, p->mii.phy_id, MDIO_MMD_PMAPMD, addr, + mode); +} + +#define XFP_MAX_RESET_TIME 500 +#define XFP_RESET_WAIT 10 + +/* Reset the PHYXS MMD. This is documented (for the Quake PHY) as doing + * a complete soft reset. + */ +static int xfp_reset_phy(struct efx_nic *efx) +{ + int rc; + + rc = mdio_clause45_reset_mmd(efx, MDIO_MMD_PHYXS, + XFP_MAX_RESET_TIME / XFP_RESET_WAIT, + XFP_RESET_WAIT); + if (rc < 0) + goto fail; + + /* Wait 250ms for the PHY to complete bootup */ + msleep(250); + + /* Check that all the MMDs we expect are present and responding. We + * expect faults on some if the link is down, but not on the PHY XS */ + rc = mdio_clause45_check_mmds(efx, XFP_REQUIRED_DEVS, + MDIO_MMDREG_DEVS0_PHYXS); + if (rc < 0) + goto fail; + + efx->board_info.init_leds(efx); + + return rc; + + fail: + EFX_ERR(efx, "XFP: reset timed out!\n"); + return rc; +} + +static int xfp_phy_init(struct efx_nic *efx) +{ + u32 devid = mdio_clause45_read_id(efx, MDIO_MMD_PHYXS); + int rc; + + EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision" + " %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid), + MDIO_ID_REV(devid)); + + rc = xfp_reset_phy(efx); + + EFX_INFO(efx, "XFP: PHY init %s.\n", + rc ? "failed" : "successful"); + + return rc; +} + +static void xfp_phy_clear_interrupt(struct efx_nic *efx) +{ + xenpack_clear_lasi_irqs(efx); +} + +static int xfp_link_ok(struct efx_nic *efx) +{ + return mdio_clause45_links_ok(efx, XFP_REQUIRED_DEVS); +} + +static int xfp_phy_check_hw(struct efx_nic *efx) +{ + int rc = 0; + int link_up = xfp_link_ok(efx); + /* Simulate a PHY event if link state has changed */ + if (link_up != efx->link_up) + falcon_xmac_sim_phy_event(efx); + + return rc; +} + +static void xfp_phy_reconfigure(struct efx_nic *efx) +{ + efx->link_up = xfp_link_ok(efx); + efx->link_options = GM_LPA_10000FULL; +} + + +static void xfp_phy_fini(struct efx_nic *efx) +{ + /* Clobber the LED if it was blinking */ + efx->board_info.blink(efx, 0); +} + +struct efx_phy_operations falcon_xfp_phy_ops = { + .init = xfp_phy_init, + .reconfigure = xfp_phy_reconfigure, + .check_hw = xfp_phy_check_hw, + .fini = xfp_phy_fini, + .clear_interrupt = xfp_phy_clear_interrupt, + .reset_xaui = efx_port_dummy_op_void, + .mmds = XFP_REQUIRED_DEVS, +}; |