1 files changed, 131 insertions, 23 deletions

diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 99e58e3f8e22..80b68539c5aa 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -1,25 +1,5 @@
 #include "qlge.h"
 
-static void ql_display_mb_sts(struct ql_adapter *qdev,
-						struct mbox_params *mbcp)
-{
-	int i;
-	static char *err_sts[] = {
-		"Command Complete",
-		"Command Not Supported",
-		"Host Interface Error",
-		"Checksum Error",
-		"Unused Completion Status",
-		"Test Failed",
-		"Command Parameter Error"};
-
-	QPRINTK(qdev, DRV, DEBUG, "%s.\n",
-		err_sts[mbcp->mbox_out[0] & 0x0000000f]);
-	for (i = 0; i < mbcp->out_count; i++)
-		QPRINTK(qdev, DRV, DEBUG, "mbox_out[%d] = 0x%.08x.\n",
-				i, mbcp->mbox_out[i]);
-}
-
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
 {
 	int status;
@@ -317,6 +297,7 @@ static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	} else {
 		QPRINTK(qdev, DRV, ERR, "Firmware Revision  = 0x%.08x.\n",
 			mbcp->mbox_out[1]);
+		qdev->fw_rev_id = mbcp->mbox_out[1];
 		status = ql_cam_route_initialize(qdev);
 		if (status)
 			QPRINTK(qdev, IFUP, ERR,
@@ -446,6 +427,9 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 		ql_aen_lost(qdev, mbcp);
 		break;
 
+	case AEN_DCBX_CHG:
+		/* Need to support AEN 8110 */
+		break;
 	default:
 		QPRINTK(qdev, DRV, ERR,
 			"Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
@@ -536,7 +520,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
 					MB_CMD_STS_GOOD) &&
 		((mbcp->mbox_out[0] & 0x0000f000) !=
 					MB_CMD_STS_INTRMDT)) {
-		ql_display_mb_sts(qdev, mbcp);
 		status = -EIO;
 	}
 end:
@@ -654,7 +637,7 @@ int ql_mb_idc_ack(struct ql_adapter *qdev)
  * for the current port.
  * Most likely will block.
  */
-static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
+int ql_mb_set_port_cfg(struct ql_adapter *qdev)
 {
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
@@ -689,7 +672,7 @@ static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
  * for the current port.
  * Most likely will block.
  */
-static int ql_mb_get_port_cfg(struct ql_adapter *qdev)
+int ql_mb_get_port_cfg(struct ql_adapter *qdev)
 {
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
@@ -719,6 +702,76 @@ static int ql_mb_get_port_cfg(struct ql_adapter *qdev)
 	return status;
 }
 
+int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 2;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MODE;
+	mbcp->mbox_in[1] = wol;
+
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set WOL mode.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+	u8 *addr = qdev->ndev->dev_addr;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 8;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MAGIC;
+	if (enable_wol) {
+		mbcp->mbox_in[1] = (u32)addr[0];
+		mbcp->mbox_in[2] = (u32)addr[1];
+		mbcp->mbox_in[3] = (u32)addr[2];
+		mbcp->mbox_in[4] = (u32)addr[3];
+		mbcp->mbox_in[5] = (u32)addr[4];
+		mbcp->mbox_in[6] = (u32)addr[5];
+		mbcp->mbox_in[7] = 0;
+	} else {
+		mbcp->mbox_in[1] = 0;
+		mbcp->mbox_in[2] = 1;
+		mbcp->mbox_in[3] = 1;
+		mbcp->mbox_in[4] = 1;
+		mbcp->mbox_in[5] = 1;
+		mbcp->mbox_in[6] = 1;
+		mbcp->mbox_in[7] = 0;
+	}
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set WOL mode.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
 /* IDC - Inter Device Communication...
  * Some firmware commands require consent of adjacent FCOE
  * function.  This function waits for the OK, or a
@@ -768,6 +821,61 @@ static int ql_idc_wait(struct ql_adapter *qdev)
 	return status;
 }
 
+int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 2;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_LED_CFG;
+	mbcp->mbox_in[1] = led_config;
+
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set LED Configuration.\n");
+		status = -EIO;
+	}
+
+	return status;
+}
+
+int ql_mb_get_led_cfg(struct ql_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 2;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_LED_CFG;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to get LED Configuration.\n");
+		status = -EIO;
+	} else
+		qdev->led_config = mbcp->mbox_out[1];
+
+	return status;
+}
+
 int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
 {
 	struct mbox_params mbc;