summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/at803x.c69
-rw-r--r--drivers/net/phy/bcm7xxx.c1
-rw-r--r--drivers/net/phy/mdio_device.c2
-rw-r--r--drivers/net/phy/micrel.c42
-rw-r--r--drivers/net/phy/phy-c45.c2
-rw-r--r--drivers/net/phy/phy-core.c20
-rw-r--r--drivers/net/phy/phy.c8
-rw-r--r--drivers/net/phy/phy_device.c74
-rw-r--r--drivers/net/phy/phylink.c2
9 files changed, 178 insertions, 42 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 2aa7b2e60046..1eb5d4fb8925 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -15,6 +15,15 @@
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
+#define AT803X_SPECIFIC_STATUS 0x11
+#define AT803X_SS_SPEED_MASK (3 << 14)
+#define AT803X_SS_SPEED_1000 (2 << 14)
+#define AT803X_SS_SPEED_100 (1 << 14)
+#define AT803X_SS_SPEED_10 (0 << 14)
+#define AT803X_SS_DUPLEX BIT(13)
+#define AT803X_SS_SPEED_DUPLEX_RESOLVED BIT(11)
+#define AT803X_SS_MDIX BIT(6)
+
#define AT803X_INTR_ENABLE 0x12
#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15)
#define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14)
@@ -357,6 +366,64 @@ static int at803x_aneg_done(struct phy_device *phydev)
return aneg_done;
}
+static int at803x_read_status(struct phy_device *phydev)
+{
+ int ss, err, old_link = phydev->link;
+
+ /* Update the link, but return if there was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ /* why bother the PHY if nothing can have changed */
+ if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+ return 0;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ err = genphy_read_lpa(phydev);
+ if (err < 0)
+ return err;
+
+ /* Read the AT8035 PHY-Specific Status register, which indicates the
+ * speed and duplex that the PHY is actually using, irrespective of
+ * whether we are in autoneg mode or not.
+ */
+ ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
+ if (ss < 0)
+ return ss;
+
+ if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
+ switch (ss & AT803X_SS_SPEED_MASK) {
+ case AT803X_SS_SPEED_10:
+ phydev->speed = SPEED_10;
+ break;
+ case AT803X_SS_SPEED_100:
+ phydev->speed = SPEED_100;
+ break;
+ case AT803X_SS_SPEED_1000:
+ phydev->speed = SPEED_1000;
+ break;
+ }
+ if (ss & AT803X_SS_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+ if (ss & AT803X_SS_MDIX)
+ phydev->mdix = ETH_TP_MDI_X;
+ else
+ phydev->mdix = ETH_TP_MDI;
+ }
+
+ if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
+ phy_resolve_aneg_pause(phydev);
+
+ return 0;
+}
+
static struct phy_driver at803x_driver[] = {
{
/* ATHEROS 8035 */
@@ -370,6 +437,7 @@ static struct phy_driver at803x_driver[] = {
.suspend = at803x_suspend,
.resume = at803x_resume,
/* PHY_GBIT_FEATURES */
+ .read_status = at803x_read_status,
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
}, {
@@ -399,6 +467,7 @@ static struct phy_driver at803x_driver[] = {
.suspend = at803x_suspend,
.resume = at803x_resume,
/* PHY_GBIT_FEATURES */
+ .read_status = at803x_read_status,
.aneg_done = at803x_aneg_done,
.ack_interrupt = &at803x_ack_interrupt,
.config_intr = &at803x_config_intr,
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 8fc33867e524..af8eabe7a6d4 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -572,6 +572,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .soft_reset = genphy_soft_reset, \
.config_init = bcm7xxx_config_init, \
.suspend = bcm7xxx_suspend, \
.resume = bcm7xxx_config_init, \
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index e282600bd83e..c1d345c3cab3 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -121,7 +121,7 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value)
return;
if (mdiodev->reset_gpio)
- gpiod_set_value(mdiodev->reset_gpio, value);
+ gpiod_set_value_cansleep(mdiodev->reset_gpio, value);
if (mdiodev->reset_ctrl) {
if (value)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 2fea5541c35a..63dedec0433d 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -341,6 +341,35 @@ static int ksz8041_config_aneg(struct phy_device *phydev)
return genphy_config_aneg(phydev);
}
+static int ksz8051_ksz8795_match_phy_device(struct phy_device *phydev,
+ const u32 ksz_phy_id)
+{
+ int ret;
+
+ if ((phydev->phy_id & MICREL_PHY_ID_MASK) != ksz_phy_id)
+ return 0;
+
+ ret = phy_read(phydev, MII_BMSR);
+ if (ret < 0)
+ return ret;
+
+ /* KSZ8051 PHY and KSZ8794/KSZ8795/KSZ8765 switch share the same
+ * exact PHY ID. However, they can be told apart by the extended
+ * capability registers presence. The KSZ8051 PHY has them while
+ * the switch does not.
+ */
+ ret &= BMSR_ERCAP;
+ if (ksz_phy_id == PHY_ID_KSZ8051)
+ return ret;
+ else
+ return !ret;
+}
+
+static int ksz8051_match_phy_device(struct phy_device *phydev)
+{
+ return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ8051);
+}
+
static int ksz8081_config_init(struct phy_device *phydev)
{
/* KSZPHY_OMSO_FACTORY_TEST is set at de-assertion of the reset line
@@ -364,6 +393,11 @@ static int ksz8061_config_init(struct phy_device *phydev)
return kszphy_config_init(phydev);
}
+static int ksz8795_match_phy_device(struct phy_device *phydev)
+{
+ return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ87XX);
+}
+
static int ksz9021_load_values_from_of(struct phy_device *phydev,
const struct device_node *of_node,
u16 reg,
@@ -1017,8 +1051,6 @@ static struct phy_driver ksphy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = PHY_ID_KSZ8051,
- .phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8051",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8051_type,
@@ -1029,6 +1061,7 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
+ .match_phy_device = ksz8051_match_phy_device,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
@@ -1141,13 +1174,12 @@ static struct phy_driver ksphy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = PHY_ID_KSZ8795,
- .phy_id_mask = MICREL_PHY_ID_MASK,
- .name = "Micrel KSZ8795",
+ .name = "Micrel KSZ87XX Switch",
/* PHY_BASIC_FEATURES */
.config_init = kszphy_config_init,
.config_aneg = ksz8873mll_config_aneg,
.read_status = ksz8873mll_read_status,
+ .match_phy_device = ksz8795_match_phy_device,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 7935593debb1..a1caeee12236 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -323,6 +323,8 @@ int genphy_c45_read_pma(struct phy_device *phydev)
{
int val;
+ linkmode_zero(phydev->lp_advertising);
+
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
if (val < 0)
return val;
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 369903d9b6ec..9412669b579c 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -283,6 +283,18 @@ void of_set_phy_eee_broken(struct phy_device *phydev)
phydev->eee_broken_modes = broken;
}
+void phy_resolve_aneg_pause(struct phy_device *phydev)
+{
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+ phydev->lp_advertising);
+ phydev->asym_pause = linkmode_test_bit(
+ ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydev->lp_advertising);
+ }
+}
+EXPORT_SYMBOL_GPL(phy_resolve_aneg_pause);
+
/**
* phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
* @phydev: The phy_device struct
@@ -305,13 +317,7 @@ void phy_resolve_aneg_linkmode(struct phy_device *phydev)
break;
}
- if (phydev->duplex == DUPLEX_FULL) {
- phydev->pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- phydev->lp_advertising);
- phydev->asym_pause = linkmode_test_bit(
- ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phydev->lp_advertising);
- }
+ phy_resolve_aneg_pause(phydev);
}
EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 7c92afd36bbe..105d389b58e7 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -457,6 +457,11 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
val);
change_autoneg = true;
break;
+ case MII_CTRL1000:
+ mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising,
+ val);
+ change_autoneg = true;
+ break;
default:
/* do nothing */
break;
@@ -567,9 +572,6 @@ int phy_start_aneg(struct phy_device *phydev)
if (AUTONEG_DISABLE == phydev->autoneg)
phy_sanitize_settings(phydev);
- /* Invalidate LP advertising flags */
- linkmode_zero(phydev->lp_advertising);
-
err = phy_config_aneg(phydev);
if (err < 0)
goto out_unlock;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d347ddcac45b..adb66a2fae18 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1783,34 +1783,18 @@ done:
}
EXPORT_SYMBOL(genphy_update_link);
-/**
- * genphy_read_status - check the link status and update current link state
- * @phydev: target phy_device struct
- *
- * Description: Check the link, then figure out the current state
- * by comparing what we advertise with what the link partner
- * advertises. Start by checking the gigabit possibilities,
- * then move on to 10/100.
- */
-int genphy_read_status(struct phy_device *phydev)
+int genphy_read_lpa(struct phy_device *phydev)
{
- int lpa, lpagb, err, old_link = phydev->link;
-
- /* Update the link, but return if there was an error */
- err = genphy_update_link(phydev);
- if (err)
- return err;
-
- /* why bother the PHY if nothing can have changed */
- if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
- return 0;
+ int lpa, lpagb;
- phydev->speed = SPEED_UNKNOWN;
- phydev->duplex = DUPLEX_UNKNOWN;
- phydev->pause = 0;
- phydev->asym_pause = 0;
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ if (!phydev->autoneg_complete) {
+ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
+ 0);
+ mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
+ return 0;
+ }
- if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
if (phydev->is_gigabit_capable) {
lpagb = phy_read(phydev, MII_STAT1000);
if (lpagb < 0)
@@ -1838,6 +1822,46 @@ int genphy_read_status(struct phy_device *phydev)
return lpa;
mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
+ } else {
+ linkmode_zero(phydev->lp_advertising);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(genphy_read_lpa);
+
+/**
+ * genphy_read_status - check the link status and update current link state
+ * @phydev: target phy_device struct
+ *
+ * Description: Check the link, then figure out the current state
+ * by comparing what we advertise with what the link partner
+ * advertises. Start by checking the gigabit possibilities,
+ * then move on to 10/100.
+ */
+int genphy_read_status(struct phy_device *phydev)
+{
+ int err, old_link = phydev->link;
+
+ /* Update the link, but return if there was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ /* why bother the PHY if nothing can have changed */
+ if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+ return 0;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ err = genphy_read_lpa(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
phy_resolve_aneg_linkmode(phydev);
} else if (phydev->autoneg == AUTONEG_DISABLE) {
int bmcr = phy_read(phydev, MII_BMCR);
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index a5a57ca94c1a..20e2ebe458f2 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -576,7 +576,7 @@ static int phylink_register_sfp(struct phylink *pl,
/**
* phylink_create() - create a phylink instance
- * @ndev: a pointer to the &struct net_device
+ * @config: a pointer to the target &struct phylink_config
* @fwnode: a pointer to a &struct fwnode_handle describing the network
* interface
* @iface: the desired link mode defined by &typedef phy_interface_t
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 19:53:46 +0000