diff options
Diffstat (limited to 'drivers/net/phy/marvell.c')
| -rw-r--r-- | drivers/net/phy/marvell.c | 53 |
1 files changed, 51 insertions, 2 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index f721444c2b0a..e6897b6a8a53 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -48,8 +48,11 @@ #define MII_M1011_IMASK_CLEAR 0x0000 #define MII_M1011_PHY_SCR 0x10 +#define MII_M1011_PHY_SCR_MDI 0x0000 +#define MII_M1011_PHY_SCR_MDI_X 0x0020 #define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060 +#define MII_M1145_PHY_EXT_ADDR_PAGE 0x16 #define MII_M1145_PHY_EXT_SR 0x1b #define MII_M1145_PHY_EXT_CR 0x14 #define MII_M1145_RGMII_RX_DELAY 0x0080 @@ -159,6 +162,43 @@ static int marvell_config_intr(struct phy_device *phydev) return err; } +static int marvell_set_polarity(struct phy_device *phydev, int polarity) +{ + int reg; + int err; + int val; + + /* get the current settings */ + reg = phy_read(phydev, MII_M1011_PHY_SCR); + if (reg < 0) + return reg; + + val = reg; + val &= ~MII_M1011_PHY_SCR_AUTO_CROSS; + switch (polarity) { + case ETH_TP_MDI: + val |= MII_M1011_PHY_SCR_MDI; + break; + case ETH_TP_MDI_X: + val |= MII_M1011_PHY_SCR_MDI_X; + break; + case ETH_TP_MDI_AUTO: + case ETH_TP_MDI_INVALID: + default: + val |= MII_M1011_PHY_SCR_AUTO_CROSS; + break; + } + + if (val != reg) { + /* Set the new polarity value in the register */ + err = phy_write(phydev, MII_M1011_PHY_SCR, val); + if (err) + return err; + } + + return 0; +} + static int marvell_config_aneg(struct phy_device *phydev) { int err; @@ -191,8 +231,7 @@ static int marvell_config_aneg(struct phy_device *phydev) if (err < 0) return err; - err = phy_write(phydev, MII_M1011_PHY_SCR, - MII_M1011_PHY_SCR_AUTO_CROSS); + err = marvell_set_polarity(phydev, phydev->mdix); if (err < 0) return err; @@ -514,6 +553,16 @@ static int m88e1111_config_init(struct phy_device *phydev) err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); if (err < 0) return err; + + /* make sure copper is selected */ + err = phy_read(phydev, MII_M1145_PHY_EXT_ADDR_PAGE); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, + err & (~0xff)); + if (err < 0) + return err; } if (phydev->interface == PHY_INTERFACE_MODE_RTBI) { |