diff options
Diffstat (limited to 'drivers/net/phy/dp83867.c')
| -rw-r--r-- | drivers/net/phy/dp83867.c | 61 |
1 files changed, 60 insertions, 1 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index ca1b462bf7b2..19865530e0b1 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -32,7 +32,9 @@ #define DP83867_CFG3 0x1e /* Extended Registers */ +#define DP83867_CFG4 0x0031 #define DP83867_RGMIICTL 0x0032 +#define DP83867_STRAP_STS1 0x006E #define DP83867_RGMIIDCTL 0x0086 #define DP83867_IO_MUX_CFG 0x0170 @@ -57,9 +59,13 @@ #define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1) #define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0) +/* STRAP_STS1 bits */ +#define DP83867_STRAP_STS1_RESERVED BIT(11) + /* PHY CTRL bits */ #define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 #define DP83867_PHYCR_FIFO_DEPTH_MASK (3 << 14) +#define DP83867_PHYCR_RESERVED_MASK BIT(11) /* RGMIIDCTL bits */ #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 @@ -70,11 +76,21 @@ #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f +/* CFG4 bits */ +#define DP83867_CFG4_PORT_MIRROR_EN BIT(0) + +enum { + DP83867_PORT_MIRROING_KEEP, + DP83867_PORT_MIRROING_EN, + DP83867_PORT_MIRROING_DIS, +}; + struct dp83867_private { int rx_id_delay; int tx_id_delay; int fifo_depth; int io_impedance; + int port_mirroring; }; static int dp83867_ack_interrupt(struct phy_device *phydev) @@ -111,6 +127,24 @@ static int dp83867_config_intr(struct phy_device *phydev) return phy_write(phydev, MII_DP83867_MICR, micr_status); } +static int dp83867_config_port_mirroring(struct phy_device *phydev) +{ + struct dp83867_private *dp83867 = + (struct dp83867_private *)phydev->priv; + u16 val; + + val = phy_read_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR); + + if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN) + val |= DP83867_CFG4_PORT_MIRROR_EN; + else + val &= ~DP83867_CFG4_PORT_MIRROR_EN; + + phy_write_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR, val); + + return 0; +} + #ifdef CONFIG_OF_MDIO static int dp83867_of_init(struct phy_device *phydev) { @@ -144,6 +178,12 @@ static int dp83867_of_init(struct phy_device *phydev) phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) return ret; + if (of_property_read_bool(of_node, "enet-phy-lane-swap")) + dp83867->port_mirroring = DP83867_PORT_MIRROING_EN; + + if (of_property_read_bool(of_node, "enet-phy-lane-no-swap")) + dp83867->port_mirroring = DP83867_PORT_MIRROING_DIS; + return of_property_read_u32(of_node, "ti,fifo-depth", &dp83867->fifo_depth); } @@ -157,7 +197,7 @@ static int dp83867_of_init(struct phy_device *phydev) static int dp83867_config_init(struct phy_device *phydev) { struct dp83867_private *dp83867; - int ret, val; + int ret, val, bs; u16 delay; if (!phydev->priv) { @@ -180,6 +220,22 @@ static int dp83867_config_init(struct phy_device *phydev) return val; val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK; val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT); + + /* The code below checks if "port mirroring" N/A MODE4 has been + * enabled during power on bootstrap. + * + * Such N/A mode enabled by mistake can put PHY IC in some + * internal testing mode and disable RGMII transmission. + * + * In this particular case one needs to check STRAP_STS1 + * register's bit 11 (marked as RESERVED). + */ + + bs = phy_read_mmd_indirect(phydev, DP83867_STRAP_STS1, + DP83867_DEVADDR); + if (bs & DP83867_STRAP_STS1_RESERVED) + val &= ~DP83867_PHYCR_RESERVED_MASK; + ret = phy_write(phydev, MII_DP83867_PHYCTRL, val); if (ret) return ret; @@ -228,6 +284,9 @@ static int dp83867_config_init(struct phy_device *phydev) phy_write(phydev, DP83867_CFG3, val); } + if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP) + dp83867_config_port_mirroring(phydev); + return 0; } |