summaryrefslogtreecommitdiffstats
path: root/drivers/net/netxen/netxen_nic_niu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/netxen/netxen_nic_niu.c')
-rw-r--r--drivers/net/netxen/netxen_nic_niu.c230
1 files changed, 4 insertions, 226 deletions
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index c3b9c83b32fe..d85203203d4d 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2003 - 2006 NetXen, Inc.
+ * Copyright (C) 2003 - 2009 NetXen, Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -22,12 +22,9 @@
*
* Contact Information:
* info@netxen.com
- * NetXen,
- * 3965 Freedom Circle, Fourth floor,
- * Santa Clara, CA 95054
- *
- *
- * Provides access to the Network Interface Unit h/w block.
+ * NetXen Inc,
+ * 18922 Forge Drive
+ * Cupertino, CA 95014-0701
*
*/
@@ -299,14 +296,6 @@ int netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter)
return result;
}
-#if 0
-int netxen_niu_xgbe_clear_phy_interrupts(struct netxen_adapter *adapter)
-{
- netxen_crb_writelit_adapter(adapter, NETXEN_NIU_ACTIVE_INT, -1);
- return 0;
-}
-#endif /* 0 */
-
static int netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter)
{
int result = 0;
@@ -467,104 +456,6 @@ int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
return 0;
}
-#if 0
-/*
- * netxen_niu_gbe_handle_phy_interrupt - Handles GbE PHY interrupts
- * @param enable 0 means don't enable the port
- * 1 means enable (or re-enable) the port
- */
-int netxen_niu_gbe_handle_phy_interrupt(struct netxen_adapter *adapter,
- int port, long enable)
-{
- int result = 0;
- __u32 int_src;
-
- printk(KERN_INFO PFX "NETXEN: Handling PHY interrupt on port %d"
- " (device enable = %d)\n", (int)port, (int)enable);
-
- /*
- * The read of the PHY INT status will clear the pending
- * interrupt status
- */
- if (netxen_niu_gbe_phy_read(adapter,
- NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS,
- &int_src) != 0)
- result = -EINVAL;
- else {
- printk(KERN_INFO PFX "PHY Interrupt source = 0x%x \n", int_src);
- if (netxen_get_phy_int_jabber(int_src))
- printk(KERN_INFO PFX "jabber Interrupt ");
- if (netxen_get_phy_int_polarity_changed(int_src))
- printk(KERN_INFO PFX "polarity changed ");
- if (netxen_get_phy_int_energy_detect(int_src))
- printk(KERN_INFO PFX "energy detect \n");
- if (netxen_get_phy_int_downshift(int_src))
- printk(KERN_INFO PFX "downshift \n");
- if (netxen_get_phy_int_mdi_xover_changed(int_src))
- printk(KERN_INFO PFX "mdi_xover_changed ");
- if (netxen_get_phy_int_fifo_over_underflow(int_src))
- printk(KERN_INFO PFX "fifo_over_underflow ");
- if (netxen_get_phy_int_false_carrier(int_src))
- printk(KERN_INFO PFX "false_carrier ");
- if (netxen_get_phy_int_symbol_error(int_src))
- printk(KERN_INFO PFX "symbol_error ");
- if (netxen_get_phy_int_autoneg_completed(int_src))
- printk(KERN_INFO PFX "autoneg_completed ");
- if (netxen_get_phy_int_page_received(int_src))
- printk(KERN_INFO PFX "page_received ");
- if (netxen_get_phy_int_duplex_changed(int_src))
- printk(KERN_INFO PFX "duplex_changed ");
- if (netxen_get_phy_int_autoneg_error(int_src))
- printk(KERN_INFO PFX "autoneg_error ");
- if ((netxen_get_phy_int_speed_changed(int_src))
- || (netxen_get_phy_int_link_status_changed(int_src))) {
- __u32 status;
-
- printk(KERN_INFO PFX
- "speed_changed or link status changed");
- if (netxen_niu_gbe_phy_read
- (adapter,
- NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
- &status) == 0) {
- if (netxen_get_phy_speed(status) == 2) {
- printk
- (KERN_INFO PFX "Link speed changed"
- " to 1000 Mbps\n");
- netxen_niu_gbe_set_gmii_mode(adapter,
- port,
- enable);
- } else if (netxen_get_phy_speed(status) == 1) {
- printk
- (KERN_INFO PFX "Link speed changed"
- " to 100 Mbps\n");
- netxen_niu_gbe_set_mii_mode(adapter,
- port,
- enable);
- } else if (netxen_get_phy_speed(status) == 0) {
- printk
- (KERN_INFO PFX "Link speed changed"
- " to 10 Mbps\n");
- netxen_niu_gbe_set_mii_mode(adapter,
- port,
- enable);
- } else {
- printk(KERN_ERR PFX "ERROR reading "
- "PHY status. Invalid speed.\n");
- result = -1;
- }
- } else {
- printk(KERN_ERR PFX
- "ERROR reading PHY status.\n");
- result = -1;
- }
-
- }
- printk(KERN_INFO "\n");
- }
- return result;
-}
-#endif /* 0 */
-
/*
* Return the current station MAC address.
* Note that the passed-in value must already be in network byte order.
@@ -641,86 +532,6 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
return 0;
}
-#if 0
-/* Enable a GbE interface */
-int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
- int port, netxen_niu_gbe_ifmode_t mode)
-{
- __u32 mac_cfg0;
- __u32 mac_cfg1;
- __u32 mii_cfg;
-
- if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
- return -EINVAL;
-
- mac_cfg0 = 0;
- netxen_gb_soft_reset(mac_cfg0);
- if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
- &mac_cfg0, 4))
- return -EIO;
- mac_cfg0 = 0;
- netxen_gb_enable_tx(mac_cfg0);
- netxen_gb_enable_rx(mac_cfg0);
- netxen_gb_unset_rx_flowctl(mac_cfg0);
- netxen_gb_tx_reset_pb(mac_cfg0);
- netxen_gb_rx_reset_pb(mac_cfg0);
- netxen_gb_tx_reset_mac(mac_cfg0);
- netxen_gb_rx_reset_mac(mac_cfg0);
-
- if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
- &mac_cfg0, 4))
- return -EIO;
- mac_cfg1 = 0;
- netxen_gb_set_preamblelen(mac_cfg1, 0xf);
- netxen_gb_set_duplex(mac_cfg1);
- netxen_gb_set_crc_enable(mac_cfg1);
- netxen_gb_set_padshort(mac_cfg1);
- netxen_gb_set_checklength(mac_cfg1);
- netxen_gb_set_hugeframes(mac_cfg1);
-
- if (mode == NETXEN_NIU_10_100_MB) {
- netxen_gb_set_intfmode(mac_cfg1, 1);
- if (adapter->hw_write_wx(adapter,
- NETXEN_NIU_GB_MAC_CONFIG_1(port),
- &mac_cfg1, 4))
- return -EIO;
-
- /* set mii mode */
- netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE +
- (port << 3), 0);
- netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE +
- (port << 3), 1);
-
- } else if (mode == NETXEN_NIU_1000_MB) {
- netxen_gb_set_intfmode(mac_cfg1, 2);
- if (adapter->hw_write_wx(adapter,
- NETXEN_NIU_GB_MAC_CONFIG_1(port),
- &mac_cfg1, 4))
- return -EIO;
- /* set gmii mode */
- netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE +
- (port << 3), 0);
- netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE +
- (port << 3), 1);
- }
- mii_cfg = 0;
- netxen_gb_set_mii_mgmt_clockselect(mii_cfg, 7);
- if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port),
- &mii_cfg, 4))
- return -EIO;
- mac_cfg0 = 0;
- netxen_gb_enable_tx(mac_cfg0);
- netxen_gb_enable_rx(mac_cfg0);
- netxen_gb_unset_rx_flowctl(mac_cfg0);
- netxen_gb_unset_tx_flowctl(mac_cfg0);
-
- if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
- &mac_cfg0, 4))
- return -EIO;
- return 0;
-}
-#endif /* 0 */
-
/* Disable a GbE interface */
int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
{
@@ -869,39 +680,6 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
return 0;
}
-#if 0
-/*
- * Return the current station MAC address.
- * Note that the passed-in value must already be in network byte order.
- */
-int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter,
- netxen_ethernet_macaddr_t * addr)
-{
- int phy = adapter->physical_port;
- u32 stationhigh;
- u32 stationlow;
- u8 val[8];
-
- if (addr == NULL)
- return -EINVAL;
- if (phy != 0)
- return -EINVAL;
-
- if (adapter->hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
- &stationhigh, 4))
- return -EIO;
- if (adapter->hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
- &stationlow, 4))
- return -EIO;
- ((__le32 *)val)[1] = cpu_to_le32(stationhigh);
- ((__le32 *)val)[0] = cpu_to_le32(stationlow);
-
- memcpy(addr, val + 2, 6);
-
- return 0;
-}
-#endif /* 0 */
-
int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
u32 mode)
{