1 files changed, 14 insertions, 44 deletions

diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 587498e140bb..653d308e0f5d 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -214,7 +214,6 @@ skip:
 			check_sfp_module = netif_running(dev) &&
 				adapter->has_link_events;
 		} else {
-			ecmd->autoneg = AUTONEG_ENABLE;
 			ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
 			ecmd->advertising |=
 				(ADVERTISED_TP | ADVERTISED_Autoneg);
@@ -252,53 +251,24 @@ static int
 netxen_nic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
-	__u32 status;
+	int ret;
 
-	/* read which mode */
-	if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
-		/* autonegotiation */
-		if (adapter->phy_write &&
-		    adapter->phy_write(adapter,
-				       NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
-				       ecmd->autoneg) != 0)
-			return -EIO;
-		else
-			adapter->link_autoneg = ecmd->autoneg;
+	if (adapter->ahw.port_type != NETXEN_NIC_GBE)
+		return -EOPNOTSUPP;
 
-		if (adapter->phy_read &&
-		    adapter->phy_read(adapter,
-				      NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-				      &status) != 0)
-			return -EIO;
+	if (!(adapter->capabilities & NX_FW_CAPABILITY_GBE_LINK_CFG))
+		return -EOPNOTSUPP;
 
-		/* speed */
-		switch (ecmd->speed) {
-		case SPEED_10:
-			netxen_set_phy_speed(status, 0);
-			break;
-		case SPEED_100:
-			netxen_set_phy_speed(status, 1);
-			break;
-		case SPEED_1000:
-			netxen_set_phy_speed(status, 2);
-			break;
-		}
-		/* set duplex mode */
-		if (ecmd->duplex == DUPLEX_HALF)
-			netxen_clear_phy_duplex(status);
-		if (ecmd->duplex == DUPLEX_FULL)
-			netxen_set_phy_duplex(status);
-		if (adapter->phy_write &&
-		    adapter->phy_write(adapter,
-				       NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-				       *((int *)&status)) != 0)
-			return -EIO;
-		else {
-			adapter->link_speed = ecmd->speed;
-			adapter->link_duplex = ecmd->duplex;
-		}
-	} else
+	ret = nx_fw_cmd_set_gbe_port(adapter, ecmd->speed, ecmd->duplex,
+				     ecmd->autoneg);
+	if (ret == NX_RCODE_NOT_SUPPORTED)
 		return -EOPNOTSUPP;
+	else if (ret)
+		return -EIO;
+
+	adapter->link_speed = ecmd->speed;
+	adapter->link_duplex = ecmd->duplex;
+	adapter->link_autoneg = ecmd->autoneg;
 
 	if (!netif_running(dev))
 		return 0;