diff options
Diffstat (limited to 'drivers/net/igb')
| -rw-r--r-- | drivers/net/igb/e1000_82575.c | 306 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_82575.h | 1 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_hw.h | 8 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_mac.c | 100 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_mbx.c | 82 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_nvm.c | 36 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_phy.c | 207 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_phy.h | 4 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_regs.h | 1 | ||||
| -rw-r--r-- | drivers/net/igb/igb.h | 1 | ||||
| -rw-r--r-- | drivers/net/igb/igb_ethtool.c | 43 | ||||
| -rw-r--r-- | drivers/net/igb/igb_main.c | 312 |
12 files changed, 681 insertions, 420 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f8f5772557ce..5d345e3036a4 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -81,6 +81,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) break; case E1000_DEV_ID_82576: case E1000_DEV_ID_82576_NS: + case E1000_DEV_ID_82576_NS_SERDES: case E1000_DEV_ID_82576_FIBER: case E1000_DEV_ID_82576_SERDES: case E1000_DEV_ID_82576_QUAD_COPPER: @@ -240,9 +241,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) **/ static s32 igb_acquire_phy_82575(struct e1000_hw *hw) { - u16 mask; + u16 mask = E1000_SWFW_PHY0_SM; - mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM; + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_SWFW_PHY1_SM; return igb_acquire_swfw_sync_82575(hw, mask); } @@ -256,9 +258,11 @@ static s32 igb_acquire_phy_82575(struct e1000_hw *hw) **/ static void igb_release_phy_82575(struct e1000_hw *hw) { - u16 mask; + u16 mask = E1000_SWFW_PHY0_SM; + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_SWFW_PHY1_SM; - mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM; igb_release_swfw_sync_82575(hw, mask); } @@ -274,45 +278,23 @@ static void igb_release_phy_82575(struct e1000_hw *hw) static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, u16 *data) { - struct e1000_phy_info *phy = &hw->phy; - u32 i, i2ccmd = 0; + s32 ret_val = -E1000_ERR_PARAM; if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { hw_dbg("PHY Address %u is out of range\n", offset); - return -E1000_ERR_PARAM; + goto out; } - /* - * Set up Op-code, Phy Address, and register address in the I2CCMD - * register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. - */ - i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - (E1000_I2CCMD_OPCODE_READ)); - - wr32(E1000_I2CCMD, i2ccmd); + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; - /* Poll the ready bit to see if the I2C read completed */ - for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { - udelay(50); - i2ccmd = rd32(E1000_I2CCMD); - if (i2ccmd & E1000_I2CCMD_READY) - break; - } - if (!(i2ccmd & E1000_I2CCMD_READY)) { - hw_dbg("I2CCMD Read did not complete\n"); - return -E1000_ERR_PHY; - } - if (i2ccmd & E1000_I2CCMD_ERROR) { - hw_dbg("I2CCMD Error bit set\n"); - return -E1000_ERR_PHY; - } + ret_val = igb_read_phy_reg_i2c(hw, offset, data); - /* Need to byte-swap the 16-bit value. */ - *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00); + hw->phy.ops.release(hw); - return 0; +out: + return ret_val; } /** @@ -327,47 +309,24 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, u16 data) { - struct e1000_phy_info *phy = &hw->phy; - u32 i, i2ccmd = 0; - u16 phy_data_swapped; + s32 ret_val = -E1000_ERR_PARAM; + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { hw_dbg("PHY Address %d is out of range\n", offset); - return -E1000_ERR_PARAM; + goto out; } - /* Swap the data bytes for the I2C interface */ - phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; - /* - * Set up Op-code, Phy Address, and register address in the I2CCMD - * register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. - */ - i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - E1000_I2CCMD_OPCODE_WRITE | - phy_data_swapped); - - wr32(E1000_I2CCMD, i2ccmd); - - /* Poll the ready bit to see if the I2C read completed */ - for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { - udelay(50); - i2ccmd = rd32(E1000_I2CCMD); - if (i2ccmd & E1000_I2CCMD_READY) - break; - } - if (!(i2ccmd & E1000_I2CCMD_READY)) { - hw_dbg("I2CCMD Write did not complete\n"); - return -E1000_ERR_PHY; - } - if (i2ccmd & E1000_I2CCMD_ERROR) { - hw_dbg("I2CCMD Error bit set\n"); - return -E1000_ERR_PHY; - } + ret_val = igb_write_phy_reg_i2c(hw, offset, data); - return 0; + hw->phy.ops.release(hw); + +out: + return ret_val; } /** @@ -706,9 +665,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) s32 ret_val; u16 speed, duplex; - /* SGMII link check is done through the PCS register. */ - if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) { + if (hw->phy.media_type != e1000_media_type_copper) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); /* @@ -723,6 +680,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) return ret_val; } + /** * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex * @hw: pointer to the HW structure @@ -788,13 +746,23 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, void igb_shutdown_serdes_link_82575(struct e1000_hw *hw) { u32 reg; + u16 eeprom_data = 0; if (hw->phy.media_type != e1000_media_type_internal_serdes || igb_sgmii_active_82575(hw)) return; - /* if the management interface is not enabled, then power down */ - if (!igb_enable_mng_pass_thru(hw)) { + if (hw->bus.func == E1000_FUNC_0) + hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data); + else if (hw->bus.func == E1000_FUNC_1) + hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); + + /* + * If APM is not enabled in the EEPROM and management interface is + * not enabled, then power down. + */ + if (!(eeprom_data & E1000_NVM_APME_82575) && + !igb_enable_mng_pass_thru(hw)) { /* Disable PCS to turn off link */ reg = rd32(E1000_PCS_CFG0); reg &= ~E1000_PCS_CFG_PCS_EN; @@ -908,6 +876,11 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) for (i = 0; i < mac->mta_reg_count; i++) array_wr32(E1000_MTA, i, 0); + /* Zero out the Unicast HASH table */ + hw_dbg("Zeroing the UTA\n"); + for (i = 0; i < mac->uta_reg_count; i++) + array_wr32(E1000_UTA, i, 0); + /* Setup link and flow control */ ret_val = igb_setup_link(hw); @@ -934,7 +907,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) { u32 ctrl; s32 ret_val; - bool link; ctrl = rd32(E1000_CTRL); ctrl |= E1000_CTRL_SLU; @@ -967,53 +939,19 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) if (ret_val) goto out; - if (hw->mac.autoneg) { - /* - * Setup autoneg and flow control advertisement - * and perform autonegotiation. - */ - ret_val = igb_copper_link_autoneg(hw); - if (ret_val) - goto out; - } else { - /* - * PHY will be set to 10H, 10F, 100H or 100F - * depending on user settings. - */ - hw_dbg("Forcing Speed and Duplex\n"); - ret_val = hw->phy.ops.force_speed_duplex(hw); - if (ret_val) { - hw_dbg("Error Forcing Speed and Duplex\n"); - goto out; - } - } - - /* - * Check link status. Wait up to 100 microseconds for link to become - * valid. - */ - ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link); - if (ret_val) - goto out; - - if (link) { - hw_dbg("Valid link established!!!\n"); - /* Config the MAC and PHY after link is up */ - igb_config_collision_dist(hw); - ret_val = igb_config_fc_after_link_up(hw); - } else { - hw_dbg("Unable to establish link!!!\n"); - } - + ret_val = igb_setup_copper_link(hw); out: return ret_val; } /** - * igb_setup_serdes_link_82575 - Setup link for fiber/serdes + * igb_setup_serdes_link_82575 - Setup link for serdes * @hw: pointer to the HW structure * - * Configures speed and duplex for fiber and serdes links. + * Configure the physical coding sub-layer (PCS) link. The PCS link is + * used on copper connections where the serialized gigabit media independent + * interface (sgmii), or serdes fiber is being used. Configures the link + * for auto-negotiation or forces speed/duplex. **/ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) { @@ -1086,18 +1024,27 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) */ if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) { /* Set PCS register for autoneg */ - reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ - E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ - E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ - E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ + E1000_PCS_LCTL_FDV_FULL | /* SerDes Full dplx */ + E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ + E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ hw_dbg("Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg); } else { - /* Set PCS register for forced speed */ - reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ - E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ - E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ - E1000_PCS_LCTL_FSD | /* Force Speed */ - E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ + /* Check for duplex first */ + if (hw->mac.forced_speed_duplex & E1000_ALL_FULL_DUPLEX) + reg |= E1000_PCS_LCTL_FDV_FULL; + + /* No need to check for 1000/full since the spec states that + * it requires autoneg to be enabled */ + /* Now set speed */ + if (hw->mac.forced_speed_duplex & E1000_ALL_100_SPEED) + reg |= E1000_PCS_LCTL_FSV_100; + + /* Force speed and force link */ + reg |= E1000_PCS_LCTL_FSD | + E1000_PCS_LCTL_FORCE_LINK | + E1000_PCS_LCTL_FLV_LINK_UP; + hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); } @@ -1167,9 +1114,18 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) { s32 ret_val = 0; - if (igb_check_alt_mac_addr(hw)) - ret_val = igb_read_mac_addr(hw); + /* + * If there's an alternate MAC address place it in RAR0 + * so that it will override the Si installed default perm + * address. + */ + ret_val = igb_check_alt_mac_addr(hw); + if (ret_val) + goto out; + + ret_val = igb_read_mac_addr(hw); +out: return ret_val; } @@ -1181,61 +1137,59 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) **/ static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw) { - u32 temp; - igb_clear_hw_cntrs_base(hw); - temp = rd32(E1000_PRC64); - temp = rd32(E1000_PRC127); - temp = rd32(E1000_PRC255); - temp = rd32(E1000_PRC511); - temp = rd32(E1000_PRC1023); - temp = rd32(E1000_PRC1522); - temp = rd32(E1000_PTC64); - temp = rd32(E1000_PTC127); - temp = rd32(E1000_PTC255); - temp = rd32(E1000_PTC511); - temp = rd32(E1000_PTC1023); - temp = rd32(E1000_PTC1522); - - temp = rd32(E1000_ALGNERRC); - temp = rd32(E1000_RXERRC); - temp = rd32(E1000_TNCRS); - temp = rd32(E1000_CEXTERR); - temp = rd32(E1000_TSCTC); - temp = rd32(E1000_TSCTFC); - - temp = rd32(E1000_MGTPRC); - temp = rd32(E1000_MGTPDC); - temp = rd32(E1000_MGTPTC); - - temp = rd32(E1000_IAC); - temp = rd32(E1000_ICRXOC); - - temp = rd32(E1000_ICRXPTC); - temp = rd32(E1000_ICRXATC); - temp = rd32(E1000_ICTXPTC); - temp = rd32(E1000_ICTXATC); - temp = rd32(E1000_ICTXQEC); - temp = rd32(E1000_ICTXQMTC); - temp = rd32(E1000_ICRXDMTC); - - temp = rd32(E1000_CBTMPC); - temp = rd32(E1000_HTDPMC); - temp = rd32(E1000_CBRMPC); - temp = rd32(E1000_RPTHC); - temp = rd32(E1000_HGPTC); - temp = rd32(E1000_HTCBDPC); - temp = rd32(E1000_HGORCL); - temp = rd32(E1000_HGORCH); - temp = rd32(E1000_HGOTCL); - temp = rd32(E1000_HGOTCH); - temp = rd32(E1000_LENERRS); + rd32(E1000_PRC64); + rd32(E1000_PRC127); + rd32(E1000_PRC255); + rd32(E1000_PRC511); + rd32(E1000_PRC1023); + rd32(E1000_PRC1522); + rd32(E1000_PTC64); + rd32(E1000_PTC127); + rd32(E1000_PTC255); + rd32(E1000_PTC511); + rd32(E1000_PTC1023); + rd32(E1000_PTC1522); + + rd32(E1000_ALGNERRC); + rd32(E1000_RXERRC); + rd32(E1000_TNCRS); + rd32(E1000_CEXTERR); + rd32(E1000_TSCTC); + rd32(E1000_TSCTFC); + + rd32(E1000_MGTPRC); + rd32(E1000_MGTPDC); + rd32(E1000_MGTPTC); + + rd32(E1000_IAC); + rd32(E1000_ICRXOC); + + rd32(E1000_ICRXPTC); + rd32(E1000_ICRXATC); + rd32(E1000_ICTXPTC); + rd32(E1000_ICTXATC); + rd32(E1000_ICTXQEC); + rd32(E1000_ICTXQMTC); + rd32(E1000_ICRXDMTC); + + rd32(E1000_CBTMPC); + rd32(E1000_HTDPMC); + rd32(E1000_CBRMPC); + rd32(E1000_RPTHC); + rd32(E1000_HGPTC); + rd32(E1000_HTCBDPC); + rd32(E1000_HGORCL); + rd32(E1000_HGORCH); + rd32(E1000_HGOTCL); + rd32(E1000_HGOTCH); + rd32(E1000_LENERRS); /* This register should not be read in copper configurations */ if (hw->phy.media_type == e1000_media_type_internal_serdes || igb_sgmii_active_82575(hw)) - temp = rd32(E1000_SCVPC); + rd32(E1000_SCVPC); } /** diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index ebd146fd4e15..7be3a0b6a057 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -167,6 +167,7 @@ struct e1000_adv_tx_context_desc { #define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */ #define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */ +#define E1000_NVM_APME_82575 0x0400 #define MAX_NUM_VFS 8 #define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */ diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 119869b1124d..2dc929419df0 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -42,6 +42,7 @@ struct e1000_hw; #define E1000_DEV_ID_82576_SERDES 0x10E7 #define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 #define E1000_DEV_ID_82576_NS 0x150A +#define E1000_DEV_ID_82576_NS_SERDES 0x1518 #define E1000_DEV_ID_82576_SERDES_QUAD 0x150D #define E1000_DEV_ID_82575EB_COPPER 0x10A7 #define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 @@ -50,8 +51,11 @@ struct e1000_hw; #define E1000_REVISION_2 2 #define E1000_REVISION_4 4 +#define E1000_FUNC_0 0 #define E1000_FUNC_1 1 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 + enum e1000_mac_type { e1000_undefined = 0, e1000_82575, @@ -70,7 +74,6 @@ enum e1000_nvm_type { e1000_nvm_unknown = 0, e1000_nvm_none, e1000_nvm_eeprom_spi, - e1000_nvm_eeprom_microwire, e1000_nvm_flash_hw, e1000_nvm_flash_sw }; @@ -79,8 +82,6 @@ enum e1000_nvm_override { e1000_nvm_override_none = 0, e1000_nvm_override_spi_small, e1000_nvm_override_spi_large, - e1000_nvm_override_microwire_small, - e1000_nvm_override_microwire_large }; enum e1000_phy_type { @@ -339,6 +340,7 @@ struct e1000_mac_info { u16 ifs_ratio; u16 ifs_step_size; u16 mta_reg_count; + u16 uta_reg_count; /* Maximum size of the MTA register table in all supported adapters */ #define MAX_MTA_REG 128 diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 7d76bb085e10..2ad358a240bf 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -185,13 +185,12 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) } if (nvm_alt_mac_addr_offset == 0xFFFF) { - ret_val = -(E1000_NOT_IMPLEMENTED); + /* There is no Alternate MAC Address */ goto out; } if (hw->bus.func == E1000_FUNC_1) - nvm_alt_mac_addr_offset += ETH_ALEN/sizeof(u16); - + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; for (i = 0; i < ETH_ALEN; i += 2) { offset = nvm_alt_mac_addr_offset + (i >> 1); ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data); @@ -206,14 +205,16 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) /* if multicast bit is set, the alternate address will not be used */ if (alt_mac_addr[0] & 0x01) { - ret_val = -(E1000_NOT_IMPLEMENTED); + hw_dbg("Ignoring Alternate Mac Address with MC bit set\n"); goto out; } - for (i = 0; i < ETH_ALEN; i++) - hw->mac.addr[i] = hw->mac.perm_addr[i] = alt_mac_addr[i]; - - hw->mac.ops.rar_set(hw, hw->mac.perm_addr, 0); + /* + * We have a valid alternate MAC address, and we want to treat it the + * same as the normal permanent MAC address stored by the HW into the + * RAR. Do this by mapping this address into RAR0. + */ + hw->mac.ops.rar_set(hw, alt_mac_addr, 0); out: return ret_val; @@ -246,8 +247,15 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) if (rar_low || rar_high) rar_high |= E1000_RAH_AV; + /* + * Some bridges will combine consecutive 32-bit writes into + * a single burst write, which will malfunction on some parts. + * The flushes avoid this. + */ wr32(E1000_RAL(index), rar_low); + wrfl(); wr32(E1000_RAH(index), rar_high); + wrfl(); } /** @@ -399,45 +407,43 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, **/ void igb_clear_hw_cntrs_base(struct e1000_hw *hw) { - u32 temp; - - temp = rd32(E1000_CRCERRS); - temp = rd32(E1000_SYMERRS); - temp = rd32(E1000_MPC); - temp = rd32(E1000_SCC); - temp = rd32(E1000_ECOL); - temp = rd32(E1000_MCC); - temp = rd32(E1000_LATECOL); - temp = rd32(E1000_COLC); - temp = rd32(E1000_DC); - temp = rd32(E1000_SEC); - temp = rd32(E1000_RLEC); - temp = rd32(E1000_XONRXC); - temp = rd32(E1000_XONTXC); - temp = rd32(E1000_XOFFRXC); - temp = rd32(E1000_XOFFTXC); - temp = rd32(E1000_FCRUC); - temp = rd32(E1000_GPRC); - temp = rd32(E1000_BPRC); - temp = rd32(E1000_MPRC); - temp = rd32(E1000_GPTC); - temp = rd32(E1000_GORCL); - temp = rd32(E1000_GORCH); - temp = rd32(E1000_GOTCL); - temp = rd32(E1000_GOTCH); - temp = rd32(E1000_RNBC); - temp = rd32(E1000_RUC); - temp = rd32(E1000_RFC); - temp = rd32(E1000_ROC); - temp = rd32(E1000_RJC); - temp = rd32(E1000_TORL); - temp = rd32(E1000_TORH); - temp = rd32(E1000_TOTL); - temp = rd32(E1000_TOTH); - temp = rd32(E1000_TPR); - temp = rd32(E1000_TPT); - temp = rd32(E1000_MPTC); - temp = rd32(E1000_BPTC); + rd32(E1000_CRCERRS); + rd32(E1000_SYMERRS); + rd32(E1000_MPC); + rd32(E1000_SCC); + rd32(E1000_ECOL); + rd32(E1000_MCC); + rd32(E1000_LATECOL); + rd32(E1000_COLC); + rd32(E1000_DC); + rd32(E1000_SEC); + rd32(E1000_RLEC); + rd32(E1000_XONRXC); + rd32(E1000_XONTXC); + rd32(E1000_XOFFRXC); + rd32(E1000_XOFFTXC); + rd32(E1000_FCRUC); + rd32(E1000_GPRC); + rd32(E1000_BPRC); + rd32(E1000_MPRC); + rd32(E1000_GPTC); + rd32(E1000_GORCL); + rd32(E1000_GORCH); + rd32(E1000_GOTCL); + rd32(E1000_GOTCH); + rd32(E1000_RNBC); + rd32(E1000_RUC); + rd32(E1000_RFC); + rd32(E1000_ROC); + rd32(E1000_RJC); + rd32(E1000_TORL); + rd32(E1000_TORH); + rd32(E1000_TOTL); + rd32(E1000_TOTH); + rd32(E1000_TPR); + rd32(E1000_TPT); + rd32(E1000_MPTC); + rd32(E1000_BPTC); } /** diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c index ed9058eca45c..c474cdb70047 100644 --- a/drivers/net/igb/e1000_mbx.c +++ b/drivers/net/igb/e1000_mbx.c @@ -143,12 +143,16 @@ static s32 igb_poll_for_msg(struct e1000_hw *hw, u16 mbx_id) if (!countdown || !mbx->ops.check_for_msg) goto out; - while (mbx->ops.check_for_msg(hw, mbx_id)) { + while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) { countdown--; if (!countdown) break; udelay(mbx->usec_delay); } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; out: return countdown ? 0 : -E1000_ERR_MBX; } @@ -168,12 +172,16 @@ static s32 igb_poll_for_ack(struct e1000_hw *hw, u16 mbx_id) if (!countdown || !mbx->ops.check_for_ack) goto out; - while (mbx->ops.check_for_ack(hw, mbx_id)) { + while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) { countdown--; if (!countdown) break; udelay(mbx->usec_delay); } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; out: return countdown ? 0 : -E1000_ERR_MBX; } @@ -217,12 +225,13 @@ out: static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) { struct e1000_mbx_info *mbx = &hw->mbx; - s32 ret_val = 0; + s32 ret_val = -E1000_ERR_MBX; - if (!mbx->ops.write) + /* exit if either we can't write or there isn't a defined timeout */ + if (!mbx->ops.write || !mbx->timeout) goto out; - /* send msg*/ + /* send msg */ ret_val = mbx->ops.write(hw, msg, size, mbx_id); /* if msg sent wait until we receive an ack */ @@ -305,6 +314,30 @@ static s32 igb_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number) } /** + * igb_obtain_mbx_lock_pf - obtain mailbox lock + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * return SUCCESS if we obtained the mailbox lock + **/ +static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + u32 p2v_mailbox; + + + /* Take ownership of the buffer */ + wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU); + + /* reserve mailbox for vf use */ + p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number)); + if (p2v_mailbox & E1000_P2VMAILBOX_PFU) + ret_val = 0; + + return ret_val; +} + +/** * igb_write_mbx_pf - Places a message in the mailbox * @hw: pointer to the HW structure * @msg: The message buffer @@ -316,27 +349,17 @@ static s32 igb_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number) static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, u16 vf_number) { - u32 p2v_mailbox; - s32 ret_val = 0; + s32 ret_val; u16 i; - /* Take ownership of the buffer */ - wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU); - - /* Make sure we have ownership now... */ - p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number)); - if (!(p2v_mailbox & E1000_P2VMAILBOX_PFU)) { - /* failed to grab ownership */ - ret_val = -E1000_ERR_MBX; + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = igb_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) goto out_no_write; - } - /* - * flush any ack or msg which may already be in the queue - * as they are likely the result of an error - */ - igb_check_for_ack_pf(hw, vf_number); + /* flush msg and acks as we are overwriting the message buffer */ igb_check_for_msg_pf(hw, vf_number); + igb_check_for_ack_pf(hw, vf_number); /* copy the caller specified message to the mailbox memory buffer */ for (i = 0; i < size; i++) @@ -367,20 +390,13 @@ out_no_write: static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, u16 vf_number) { - u32 p2v_mailbox; - s32 ret_val = 0; + s32 ret_val; u16 i; - /* Take ownership of the buffer */ - wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU); - - /* Make sure we have ownership now... */ - p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number)); - if (!(p2v_mailbox & E1000_P2VMAILBOX_PFU)) { - /* failed to grab ownership */ - ret_val = -E1000_ERR_MBX; + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = igb_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) goto out_no_read; - } /* copy the message to the mailbox memory buffer */ for (i = 0; i < size; i++) @@ -392,8 +408,6 @@ static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, /* update stats */ hw->mbx.stats.msgs_rx++; - ret_val = 0; - out_no_read: return ret_val; } diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c index a88bfe2f1e8f..d83b77fa4038 100644 --- a/drivers/net/igb/e1000_nvm.c +++ b/drivers/net/igb/e1000_nvm.c @@ -78,9 +78,7 @@ static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) u32 mask; mask = 0x01 << (count - 1); - if (nvm->type == e1000_nvm_eeprom_microwire) - eecd &= ~E1000_EECD_DO; - else if (nvm->type == e1000_nvm_eeprom_spi) + if (nvm->type == e1000_nvm_eeprom_spi) eecd |= E1000_EECD_DO; do { @@ -220,22 +218,7 @@ static void igb_standby_nvm(struct e1000_hw *hw) struct e1000_nvm_info *nvm = &hw->nvm; u32 eecd = rd32(E1000_EECD); - if (nvm->type == e1000_nvm_eeprom_microwire) { - eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - wr32(E1000_EECD, eecd); - wrfl(); - udelay(nvm->delay_usec); - - igb_raise_eec_clk(hw, &eecd); - - /* Select EEPROM */ - eecd |= E1000_EECD_CS; - wr32(E1000_EECD, eecd); - wrfl(); - udelay(nvm->delay_usec); - - igb_lower_eec_clk(hw, &eecd); - } else if (nvm->type == e1000_nvm_eeprom_spi) { + if (nvm->type == e1000_nvm_eeprom_spi) { /* Toggle CS to flush commands */ eecd |= E1000_EECD_CS; wr32(E1000_EECD, eecd); @@ -263,12 +246,6 @@ static void e1000_stop_nvm(struct e1000_hw *hw) /* Pull CS high */ eecd |= E1000_EECD_CS; igb_lower_eec_clk(hw, &eecd); - } else if (hw->nvm.type == e1000_nvm_eeprom_microwire) { - /* CS on Microcwire is active-high */ - eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); - wr32(E1000_EECD, eecd); - igb_raise_eec_clk(hw, &eecd); - igb_lower_eec_clk(hw, &eecd); } } @@ -304,14 +281,7 @@ static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw) u8 spi_stat_reg; - if (nvm->type == e1000_nvm_eeprom_microwire) { - /* Clear SK and DI */ - eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); - wr32(E1000_EECD, eecd); - /* Set CS */ - eecd |= E1000_EECD_CS; - wr32(E1000_EECD, eecd); - } else if (nvm->type == e1000_nvm_eeprom_spi) { + if (nvm->type == e1000_nvm_eeprom_spi) { /* Clear SK and CS */ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); wr32(E1000_EECD, eecd); diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index ee460600e74b..83b706c460b3 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -39,6 +39,9 @@ static s32 igb_wait_autoneg(struct e1000_hw *hw); /* Cable length tables */ static const u16 e1000_m88_cable_length_table[] = { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_m88_cable_length_table) / \ + sizeof(e1000_m88_cable_length_table[0])) static const u16 e1000_igp_2_cable_length_table[] = { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, @@ -109,7 +112,10 @@ out: **/ static s32 igb_phy_reset_dsp(struct e1000_hw *hw) { - s32 ret_val; + s32 ret_val = 0; + + if (!(hw->phy.ops.write_reg)) + goto out; ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); if (ret_val) @@ -239,6 +245,103 @@ out: } /** + * igb_read_phy_reg_i2c - Read PHY register using i2c + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the i2c interface and stores the + * retrieved information in data. + **/ +s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + + + /* + * Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + (E1000_I2CCMD_OPCODE_READ)); + + wr32(E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + udelay(50); + i2ccmd = rd32(E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + hw_dbg("I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + hw_dbg("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + /* Need to byte-swap the 16-bit value. */ + *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00); + + return 0; +} + +/** + * igb_write_phy_reg_i2c - Write PHY register using i2c + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset using the i2c interface. + **/ +s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + u16 phy_data_swapped; + + + /* Swap the data bytes for the I2C interface */ + phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); + + /* + * Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | + phy_data_swapped); + + wr32(E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + udelay(50); + i2ccmd = rd32(E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + hw_dbg("I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + hw_dbg("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + return 0; +} + +/** * igb_read_phy_reg_igp - Read igp PHY register * @hw: pointer to the HW structure * @offset: register offset to be read @@ -572,7 +675,7 @@ out: * and restart the negotiation process between the link partner. If * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. **/ -s32 igb_copper_link_autoneg(struct e1000_hw *hw) +static s32 igb_copper_link_autoneg(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val; @@ -796,6 +899,65 @@ out: } /** + * igb_setup_copper_link - Configure copper link settings + * @hw: pointer to the HW structure + * + * Calls the appropriate function to configure the link for auto-neg or forced + * speed and duplex. Then we check for link, once link is established calls + * to configure collision distance and flow control are called. If link is + * not established, we return -E1000_ERR_PHY (-2). + **/ +s32 igb_setup_copper_link(struct e1000_hw *hw) +{ + s32 ret_val; + bool link; + + + if (hw->mac.autoneg) { + /* + * Setup autoneg and flow control advertisement and perform + * autonegotiation. + */ + ret_val = igb_copper_link_autoneg(hw); + if (ret_val) + goto out; + } else { + /* + * PHY will be set to 10H, 10F, 100H or 100F + * depending on user settings. + */ + hw_dbg("Forcing Speed and Duplex\n"); + ret_val = hw->phy.ops.force_speed_duplex(hw); + if (ret_val) { + hw_dbg("Error Forcing Speed and Duplex\n"); + goto out; + } + } + + /* + * Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + ret_val = igb_phy_has_link(hw, + COPPER_LINK_UP_LIMIT, + 10, + &link); + if (ret_val) + goto out; + + if (link) { + hw_dbg("Valid link established!!!\n"); + igb_config_collision_dist(hw); + ret_val = igb_config_fc_after_link_up(hw); + } else { + hw_dbg("Unable to establish link!!!\n"); + } + +out: + return ret_val; +} + +/** * igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY * @hw: pointer to the HW structure * @@ -903,22 +1065,19 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) igb_phy_force_speed_duplex_setup(hw, &phy_data); - /* Reset the phy to commit changes. */ - phy_data |= MII_CR_RESET; - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); if (ret_val) goto out; - udelay(1); + /* Reset the phy to commit changes. */ + ret_val = igb_phy_sw_reset(hw); + if (ret_val) + goto out; if (phy->autoneg_wait_to_complete) { hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); - ret_val = igb_phy_has_link(hw, - PHY_FORCE_LIMIT, - 100000, - &link); + ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link); if (ret_val) goto out; @@ -928,8 +1087,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) * Reset the DSP and cross our fingers. */ ret_val = phy->ops.write_reg(hw, - M88E1000_PHY_PAGE_SELECT, - 0x001d); + M88E1000_PHY_PAGE_SELECT, + 0x001d); if (ret_val) goto out; ret_val = igb_phy_reset_dsp(hw); @@ -939,7 +1098,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) /* Try once more */ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, - 100000, &link); + 100000, &link); if (ret_val) goto out; } @@ -1051,9 +1210,12 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; + s32 ret_val = 0; u16 data; + if (!(hw->phy.ops.read_reg)) + goto out; + ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); if (ret_val) goto out; @@ -1288,8 +1450,14 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, * it across the board. */ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - break; + if (ret_val) { + /* + * If the first read fails, another entity may have + * ownership of the resources, wait and try again to + * see if they have relinquished the resources yet. + */ + udelay(usec_interval); + } ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); if (ret_val) break; @@ -1333,8 +1501,13 @@ s32 igb_get_cable_length_m88(struct e1000_hw *hw) index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> M88E1000_PSSR_CABLE_LENGTH_SHIFT; + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) { + ret_val = -E1000_ERR_PHY; + goto out; + } + phy->min_cable_length = e1000_m88_cable_length_table[index]; - phy->max_cable_length = e1000_m88_cable_length_table[index+1]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h index ebe4b616db8a..adb9436b7336 100644 --- a/drivers/net/igb/e1000_phy.h +++ b/drivers/net/igb/e1000_phy.h @@ -43,7 +43,6 @@ enum e1000_smart_speed { s32 igb_check_downshift(struct e1000_hw *hw); s32 igb_check_reset_block(struct e1000_hw *hw); -s32 igb_copper_link_autoneg(struct e1000_hw *hw); s32 igb_copper_link_setup_igp(struct e1000_hw *hw); s32 igb_copper_link_setup_m88(struct e1000_hw *hw); s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw); @@ -57,10 +56,13 @@ s32 igb_phy_sw_reset(struct e1000_hw *hw); s32 igb_phy_hw_reset(struct e1000_hw *hw); s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active); +s32 igb_setup_copper_link(struct e1000_hw *hw); s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, u32 usec_interval, bool *success); s32 igb_phy_init_script_igp3(struct e1000_hw *hw); +s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data); +s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data); /* IGP01E1000 Specific Registers */ #define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index 345d1442d6d6..76c338929f68 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -331,6 +331,7 @@ enum { #define E1000_QDE 0x02408 /* Queue Drop Enable - RW */ #define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */ #define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */ +#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */ #define E1000_IOVTCL 0x05BBC /* IOV Control Register */ /* These act per VF so an array friendly macro is used */ #define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n))) diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 7126fea26fec..b805b1c63f80 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -256,7 +256,6 @@ struct igb_adapter { struct net_device *netdev; struct napi_struct napi; struct pci_dev *pdev; - struct net_device_stats net_stats; struct cyclecounter cycles; struct timecounter clock; struct timecompare compare; diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index aab3d971af51..dafb25bfd9e1 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -37,14 +37,22 @@ #include "igb.h" +enum {NETDEV_STATS, IGB_STATS}; + struct igb_stats { char stat_string[ETH_GSTRING_LEN]; + int type; int sizeof_stat; int stat_offset; }; -#define IGB_STAT(m) FIELD_SIZEOF(struct igb_adapter, m), \ - offsetof(struct igb_adapter, m) +#define IGB_STAT(m) IGB_STATS, \ + FIELD_SIZEOF(struct igb_adapter, m), \ + offsetof(struct igb_adapter, m) +#define IGB_NETDEV_STAT(m) NETDEV_STATS, \ + FIELD_SIZEOF(struct net_device, m), \ + offsetof(struct net_device, m) + static const struct igb_stats igb_gstrings_stats[] = { { "rx_packets", IGB_STAT(stats.gprc) }, { "tx_packets", IGB_STAT(stats.gptc) }, @@ -54,22 +62,22 @@ static const struct igb_stats igb_gstrings_stats[] = { { "tx_broadcast", IGB_STAT(stats.bptc) }, { "rx_multicast", IGB_STAT(stats.mprc) }, { "tx_multicast", IGB_STAT(stats.mptc) }, - { "rx_errors", IGB_STAT(net_stats.rx_errors) }, - { "tx_errors", IGB_STAT(net_stats.tx_errors) }, - { "tx_dropped", IGB_STAT(net_stats.tx_dropped) }, + { "rx_errors", IGB_NETDEV_STAT(stats.rx_errors) }, + { "tx_errors", IGB_NETDEV_STAT(stats.tx_errors) }, + { "tx_dropped", IGB_NETDEV_STAT(stats.tx_dropped) }, { "multicast", IGB_STAT(stats.mprc) }, { "collisions", IGB_STAT(stats.colc) }, - { "rx_length_errors", IGB_STAT(net_stats.rx_length_errors) }, - { "rx_over_errors", IGB_STAT(net_stats.rx_over_errors) }, + { "rx_length_errors", IGB_NETDEV_STAT(stats.rx_length_errors) }, + { "rx_over_errors", IGB_NETDEV_STAT(stats.rx_over_errors) }, { "rx_crc_errors", IGB_STAT(stats.crcerrs) }, - { "rx_frame_errors", IGB_STAT(net_stats.rx_frame_errors) }, + { "rx_frame_errors", IGB_NETDEV_STAT(stats.rx_frame_errors) }, { "rx_no_buffer_count", IGB_STAT(stats.rnbc) }, - { "rx_queue_drop_packet_count", IGB_STAT(net_stats.rx_fifo_errors) }, + { "rx_queue_drop_packet_count", IGB_NETDEV_STAT(stats.rx_fifo_errors) }, { "rx_missed_errors", IGB_STAT(stats.mpc) }, { "tx_aborted_errors", IGB_STAT(stats.ecol) }, { "tx_carrier_errors", IGB_STAT(stats.tncrs) }, - { "tx_fifo_errors", IGB_STAT(net_stats.tx_fifo_errors) }, - { "tx_heartbeat_errors", IGB_STAT(net_stats.tx_heartbeat_errors) }, + { "tx_fifo_errors", IGB_NETDEV_STAT(stats.tx_fifo_errors) }, + { "tx_heartbeat_errors", IGB_NETDEV_STAT(stats.tx_heartbeat_errors) }, { "tx_window_errors", IGB_STAT(stats.latecol) }, { "tx_abort_late_coll", IGB_STAT(stats.latecol) }, { "tx_deferred_ok", IGB_STAT(stats.dc) }, @@ -1966,10 +1974,21 @@ static void igb_get_ethtool_stats(struct net_device *netdev, int stat_count_rx = sizeof(struct igb_rx_queue_stats) / sizeof(u64); int j; int i; + char *p = NULL; igb_update_stats(adapter); for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { - char *p = (char *)adapter+igb_gstrings_stats[i].stat_offset; + switch (igb_gstrings_stats[i].type) { + case NETDEV_STATS: + p = (char *) netdev + + igb_gstrings_stats[i].stat_offset; + break; + case IGB_STATS: + p = (char *) adapter + + igb_gstrings_stats[i].stat_offset; + break; + } + data[i] = (igb_gstrings_stats[i].sizeof_stat == sizeof(u64)) ? *(u64 *)p : *(u32 *)p; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 714c3a4a44ef..2ffe0997b838 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -63,6 +63,7 @@ static const struct e1000_info *igb_info_tbl[] = { static struct pci_device_id igb_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 }, @@ -106,6 +107,7 @@ static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb, static struct net_device_stats *igb_get_stats(struct net_device *); static int igb_change_mtu(struct net_device *, int); static int igb_set_mac(struct net_device *, void *); +static void igb_set_uta(struct igb_adapter *adapter); static irqreturn_t igb_intr(int irq, void *); static irqreturn_t igb_intr_msi(int irq, void *); static irqreturn_t igb_msix_other(int irq, void *); @@ -127,10 +129,10 @@ static void igb_vlan_rx_register(struct net_device *, struct vlan_group *); static void igb_vlan_rx_add_vid(struct net_device *, u16); static void igb_vlan_rx_kill_vid(struct net_device *, u16); static void igb_restore_vlan(struct igb_adapter *); +static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8); static void igb_ping_all_vfs(struct igb_adapter *); static void igb_msg_task(struct igb_adapter *); static int igb_rcv_msg_from_vf(struct igb_adapter *, u32); -static inline void igb_set_rah_pool(struct e1000_hw *, int , int); static void igb_vmm_control(struct igb_adapter *); static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *); static void igb_restore_vf_multicasts(struct igb_adapter *adapter); @@ -141,7 +143,6 @@ static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn) reg_data = rd32(E1000_VMOLR(vfn)); reg_data |= E1000_VMOLR_BAM | /* Accept broadcast */ - E1000_VMOLR_ROPE | /* Accept packets matched in UTA */ E1000_VMOLR_ROMPE | /* Accept packets matched in MTA */ E1000_VMOLR_AUPE | /* Accept untagged packets */ E1000_VMOLR_STRVLAN; /* Strip vlan tags */ @@ -168,16 +169,6 @@ static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, return 0; } -static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry) -{ - u32 reg_data; - - reg_data = rd32(E1000_RAH(entry)); - reg_data &= ~E1000_RAH_POOL_MASK; - reg_data |= E1000_RAH_POOL_1 << pool;; - wr32(E1000_RAH(entry), reg_data); -} - #ifdef CONFIG_PM static int igb_suspend(struct pci_dev *, pm_message_t); static int igb_resume(struct pci_dev *); @@ -982,7 +973,6 @@ int igb_up(struct igb_adapter *adapter) igb_configure_msix(adapter); igb_vmm_control(adapter); - igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0); igb_set_vmolr(hw, adapter->vfs_allocated_count); /* Clear any pending interrupts. */ @@ -1769,7 +1759,6 @@ static int igb_open(struct net_device *netdev) igb_configure(adapter); igb_vmm_control(adapter); - igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0); igb_set_vmolr(hw, adapter->vfs_allocated_count); err = igb_request_irq(adapter); @@ -2298,6 +2287,13 @@ static void igb_configure_rx(struct igb_adapter *adapter) /* Set the default pool for the PF's first queue */ igb_configure_vt_default_pool(adapter); + /* set UTA to appropriate mode */ + igb_set_uta(adapter); + + /* set the correct pool for the PF default MAC address in entry 0 */ + igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0, + adapter->vfs_allocated_count); + igb_rlpml_set(adapter); /* Enable Receives */ @@ -2521,61 +2517,90 @@ static int igb_set_mac(struct net_device *netdev, void *p) memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); - igb_rar_set(hw, hw->mac.addr, 0); - igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0); + /* set the correct pool for the new PF MAC address in entry 0 */ + igb_rar_set_qsel(adapter, hw->mac.addr, 0, + adapter->vfs_allocated_count); return 0; } /** - * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set + * igb_write_mc_addr_list - write multicast addresses to MTA * @netdev: network interface device structure * - * The set_rx_mode entry point is called whenever the unicast or multicast - * address lists or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper unicast, multicast, - * promiscuous mode, and all-multi behavior. + * Writes multicast address list to the MTA hash table. + * Returns: -ENOMEM on failure + * 0 on no addresses written + * X on writing X addresses to MTA **/ -static void igb_set_rx_mode(struct net_device *netdev) +static int igb_write_mc_addr_list(struct net_device *netdev) { struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - unsigned int rar_entries = hw->mac.rar_entry_count - - (adapter->vfs_allocated_count + 1); struct dev_mc_list *mc_ptr = netdev->mc_list; - u8 *mta_list = NULL; - u32 rctl; + u8 *mta_list; + u32 vmolr = 0; int i; - /* Check for Promiscuous and All Multicast modes */ - rctl = rd32(E1000_RCTL); + if (!netdev->mc_count) { + /* nothing to program, so clear mc list */ + igb_update_mc_addr_list(hw, NULL, 0); + igb_restore_vf_multicasts(adapter); + return 0; + } - if (netdev->flags & IFF_PROMISC) { - rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); - rctl &= ~E1000_RCTL_VFE; - } else { - if (netdev->flags & IFF_ALLMULTI) - rctl |= E1000_RCTL_MPE; - else - rctl &= ~E1000_RCTL_MPE; + mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC); + if (!mta_list) + return -ENOMEM; - if (netdev->uc.count > rar_entries) - rctl |= E1000_RCTL_UPE; - else - rctl &= ~E1000_RCTL_UPE; - rctl |= E1000_RCTL_VFE; + /* set vmolr receive overflow multicast bit */ + vmolr |= E1000_VMOLR_ROMPE; + + /* The shared function expects a packed array of only addresses. */ + mc_ptr = netdev->mc_list; + + for (i = 0; i < netdev->mc_count; i++) { + if (!mc_ptr) + break; + memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN); + mc_ptr = mc_ptr->next; } - wr32(E1000_RCTL, rctl); + igb_update_mc_addr_list(hw, mta_list, i); + kfree(mta_list); + + return netdev->mc_count; +} + +/** + * igb_write_uc_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure + * + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table + **/ +static int igb_write_uc_addr_list(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + unsigned int vfn = adapter->vfs_allocated_count; + unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1); + int count = 0; + + /* return ENOMEM indicating insufficient memory for addresses */ + if (netdev->uc.count > rar_entries) + return -ENOMEM; if (netdev->uc.count && rar_entries) { struct netdev_hw_addr *ha; list_for_each_entry(ha, &netdev->uc.list, list) { if (!rar_entries) break; - igb_rar_set(hw, ha->addr, rar_entries); - igb_set_rah_pool(hw, adapter->vfs_allocated_count, - rar_entries); - rar_entries--; + igb_rar_set_qsel(adapter, ha->addr, + rar_entries--, + vfn); + count++; } } /* write the addresses in reverse order to avoid write combining */ @@ -2585,29 +2610,79 @@ static void igb_set_rx_mode(struct net_device *netdev) } wrfl(); - if (!netdev->mc_count) { - /* nothing to program, so clear mc list */ - igb_update_mc_addr_list(hw, NULL, 0); - igb_restore_vf_multicasts(adapter); - return; + return count; +} + +/** + * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_rx_mode entry point is called whenever the unicast or multicast + * address lists or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast, + * promiscuous mode, and all-multi behavior. + **/ +static void igb_set_rx_mode(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + unsigned int vfn = adapter->vfs_allocated_count; + u32 rctl, vmolr = 0; + int count; + + /* Check for Promiscuous and All Multicast modes */ + rctl = rd32(E1000_RCTL); + + /* clear the effected bits */ + rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE); + + if (netdev->flags & IFF_PROMISC) { + rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); + vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME); + } else { + if (netdev->flags & IFF_ALLMULTI) { + rctl |= E1000_RCTL_MPE; + vmolr |= E1000_VMOLR_MPME; + } else { + /* + * Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscous mode so + * that we can at least receive multicast traffic + */ + count = igb_write_mc_addr_list(netdev); + if (count < 0) { + rctl |= E1000_RCTL_MPE; + vmolr |= E1000_VMOLR_MPME; + } else if (count) { + vmolr |= E1000_VMOLR_ROMPE; + } + } + /* + * Write addresses to available RAR registers, if there is not + * sufficient space to store all the addresses then enable + * unicast promiscous mode + */ + count = igb_write_uc_addr_list(netdev); + if (count < 0) { + rctl |= E1000_RCTL_UPE; + vmolr |= E1000_VMOLR_ROPE; + } + rctl |= E1000_RCTL_VFE; } + wr32(E1000_RCTL, rctl); - mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC); - if (!mta_list) { - dev_err(&adapter->pdev->dev, - "failed to allocate multicast filter list\n"); + /* + * In order to support SR-IOV and eventually VMDq it is necessary to set + * the VMOLR to enable the appropriate modes. Without this workaround + * we will have issues with VLAN tag stripping not being done for frames + * that are only arriving because we are the default pool + */ + if (hw->mac.type < e1000_82576) return; - } - /* The shared function expects a packed array of only addresses. */ - for (i = 0; i < netdev->mc_count; i++) { - if (!mc_ptr) - break; - memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN); - mc_ptr = mc_ptr->next; - } - igb_update_mc_addr_list(hw, mta_list, i); - kfree(mta_list); + vmolr |= rd32(E1000_VMOLR(vfn)) & + ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE); + wr32(E1000_VMOLR(vfn), vmolr); igb_restore_vf_multicasts(adapter); } @@ -3459,10 +3534,8 @@ static void igb_reset_task(struct work_struct *work) **/ static struct net_device_stats *igb_get_stats(struct net_device *netdev) { - struct igb_adapter *adapter = netdev_priv(netdev); - /* only return the current stats */ - return &adapter->net_stats; + return &netdev->stats; } /** @@ -3548,6 +3621,7 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu) void igb_update_stats(struct igb_adapter *adapter) { + struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; u16 phy_tmp; @@ -3637,8 +3711,8 @@ void igb_update_stats(struct igb_adapter *adapter) adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC); /* Fill out the OS statistics structure */ - adapter->net_stats.multicast = adapter->stats.mprc; - adapter->net_stats.collisions = adapter->stats.colc; + netdev->stats.multicast = adapter->stats.mprc; + netdev->stats.collisions = adapter->stats.colc; /* Rx Errors */ @@ -3659,7 +3733,7 @@ void igb_update_stats(struct igb_adapter *adapter) adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp; rqdpc_total += adapter->rx_ring[i].rx_stats.drops; } - adapter->net_stats.rx_fifo_errors = rqdpc_total; + netdev->stats.rx_fifo_errors = rqdpc_total; } /* Note RNBC (Receive No Buffers Count) is an not an exact @@ -3667,26 +3741,26 @@ void igb_update_stats(struct igb_adapter *adapter) * one of the reason for saving it in rx_fifo_errors, as its * potentially not a true drop. */ - adapter->net_stats.rx_fifo_errors += adapter->stats.rnbc; + netdev->stats.rx_fifo_errors += adapter->stats.rnbc; /* RLEC on some newer hardware can be incorrect so build * our own version based on RUC and ROC */ - adapter->net_stats.rx_errors = adapter->stats.rxerrc + + netdev->stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; - adapter->net_stats.rx_length_errors = adapter->stats.ruc + + netdev->stats.rx_length_errors = adapter->stats.ruc + adapter->stats.roc; - adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; - adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; - adapter->net_stats.rx_missed_errors = adapter->stats.mpc; + netdev->stats.rx_crc_errors = adapter->stats.crcerrs; + netdev->stats.rx_frame_errors = adapter->stats.algnerrc; + netdev->stats.rx_missed_errors = adapter->stats.mpc; /* Tx Errors */ - adapter->net_stats.tx_errors = adapter->stats.ecol + + netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol; - adapter->net_stats.tx_aborted_errors = adapter->stats.ecol; - adapter->net_stats.tx_window_errors = adapter->stats.latecol; - adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs; + netdev->stats.tx_aborted_errors = adapter->stats.ecol; + netdev->stats.tx_window_errors = adapter->stats.latecol; + netdev->stats.tx_carrier_errors = adapter->stats.tncrs; /* Tx Dropped needs to be maintained elsewhere */ @@ -4142,8 +4216,7 @@ static inline void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf) igb_vf_reset_event(adapter, vf); /* set vf mac address */ - igb_rar_set(hw, vf_mac, rar_entry); - igb_set_rah_pool(hw, vf, rar_entry); + igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf); /* enable transmit and receive for vf */ reg = rd32(E1000_VFTE); @@ -4273,6 +4346,33 @@ static int igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf) } /** + * igb_set_uta - Set unicast filter table address + * @adapter: board private structure + * + * The unicast table address is a register array of 32-bit registers. + * The table is meant to be used in a way similar to how the MTA is used + * however due to certain limitations in the hardware it is necessary to + * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous + * enable bit to allow vlan tag stripping when promiscous mode is enabled + **/ +static void igb_set_uta(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + /* The UTA table only exists on 82576 hardware and newer */ + if (hw->mac.type < e1000_82576) + return; + + /* we only need to do this if VMDq is enabled */ + if (!adapter->vfs_allocated_count) + return; + + for (i = 0; i < hw->mac.uta_reg_count; i++) + array_wr32(E1000_UTA, i, ~0); +} + +/** * igb_intr_msi - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure @@ -4539,8 +4639,8 @@ static bool igb_clean_tx_irq(struct igb_ring *tx_ring) tx_ring->total_packets += total_packets; tx_ring->tx_stats.bytes += total_bytes; tx_ring->tx_stats.packets += total_packets; - adapter->net_stats.tx_bytes += total_bytes; - adapter->net_stats.tx_packets += total_packets; + netdev->stats.tx_bytes += total_bytes; + netdev->stats.tx_packets += total_packets; return (count < tx_ring->count); } @@ -4783,8 +4883,8 @@ next_desc: rx_ring->total_bytes += total_bytes; rx_ring->rx_stats.packets += total_packets; rx_ring->rx_stats.bytes += total_bytes; - adapter->net_stats.rx_bytes += total_bytes; - adapter->net_stats.rx_packets += total_packets; + netdev->stats.rx_bytes += total_bytes; + netdev->stats.rx_packets += total_packets; return cleaned; } @@ -4834,18 +4934,12 @@ static void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, } if (!buffer_info->skb) { - skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN); + skb = netdev_alloc_skb_ip_align(netdev, bufsz); if (!skb) { adapter->alloc_rx_buff_failed++; goto no_buffers; } - /* Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); - buffer_info->skb = skb; buffer_info->dma = pci_map_single(pdev, skb->data, bufsz, @@ -5532,6 +5626,33 @@ static void igb_io_resume(struct pci_dev *pdev) igb_get_hw_control(adapter); } +static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index, + u8 qsel) +{ + u32 rar_low, rar_high; + struct e1000_hw *hw = &adapter->hw; + + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + /* Indicate to hardware the Address is Valid. */ + rar_high |= E1000_RAH_AV; + + if (hw->mac.type == e1000_82575) + rar_high |= E1000_RAH_POOL_1 * qsel; + else + rar_high |= E1000_RAH_POOL_1 << qsel; + + wr32(E1000_RAL(index), rar_low); + wrfl(); + wr32(E1000_RAH(index), rar_high); + wrfl(); +} + static int igb_set_vf_mac(struct igb_adapter *adapter, int vf, unsigned char *mac_addr) { @@ -5542,8 +5663,7 @@ static int igb_set_vf_mac(struct igb_adapter *adapter, memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN); - igb_rar_set(hw, mac_addr, rar_entry); - igb_set_rah_pool(hw, vf, rar_entry); + igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf); return 0; } |