summaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154/at86rf230.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ieee802154/at86rf230.c')
-rw-r--r--drivers/net/ieee802154/at86rf230.c120
1 files changed, 85 insertions, 35 deletions
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 7b051eacb7f1..1d438bc54189 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -46,8 +46,6 @@ struct at86rf2xx_chip_data {
u16 t_off_to_tx_on;
u16 t_frame;
u16 t_p_ack;
- /* completion timeout for tx in msecs */
- u16 t_tx_timeout;
int rssi_base_val;
int (*set_channel)(struct at86rf230_local *, u8, u8);
@@ -689,7 +687,7 @@ at86rf230_sync_state_change_complete(void *context)
static int
at86rf230_sync_state_change(struct at86rf230_local *lp, unsigned int state)
{
- int rc;
+ unsigned long rc;
at86rf230_async_state_change(lp, &lp->state, state,
at86rf230_sync_state_change_complete,
@@ -1281,7 +1279,6 @@ static struct at86rf2xx_chip_data at86rf233_data = {
.t_off_to_tx_on = 80,
.t_frame = 4096,
.t_p_ack = 545,
- .t_tx_timeout = 2000,
.rssi_base_val = -91,
.set_channel = at86rf23x_set_channel,
.get_desense_steps = at86rf23x_get_desens_steps
@@ -1295,7 +1292,6 @@ static struct at86rf2xx_chip_data at86rf231_data = {
.t_off_to_tx_on = 110,
.t_frame = 4096,
.t_p_ack = 545,
- .t_tx_timeout = 2000,
.rssi_base_val = -91,
.set_channel = at86rf23x_set_channel,
.get_desense_steps = at86rf23x_get_desens_steps
@@ -1309,13 +1305,12 @@ static struct at86rf2xx_chip_data at86rf212_data = {
.t_off_to_tx_on = 200,
.t_frame = 4096,
.t_p_ack = 545,
- .t_tx_timeout = 2000,
.rssi_base_val = -100,
.set_channel = at86rf212_set_channel,
.get_desense_steps = at86rf212_get_desens_steps
};
-static int at86rf230_hw_init(struct at86rf230_local *lp)
+static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
{
int rc, irq_type, irq_pol = IRQ_ACTIVE_HIGH;
unsigned int dvdd;
@@ -1326,7 +1321,12 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
return rc;
irq_type = irq_get_trigger_type(lp->spi->irq);
- if (irq_type == IRQ_TYPE_EDGE_FALLING)
+ if (irq_type == IRQ_TYPE_EDGE_RISING ||
+ irq_type == IRQ_TYPE_EDGE_FALLING)
+ dev_warn(&lp->spi->dev,
+ "Using edge triggered irq's are not recommended!\n");
+ if (irq_type == IRQ_TYPE_EDGE_FALLING ||
+ irq_type == IRQ_TYPE_LEVEL_LOW)
irq_pol = IRQ_ACTIVE_LOW;
rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol);
@@ -1341,6 +1341,11 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
if (rc)
return rc;
+ /* reset values differs in at86rf231 and at86rf233 */
+ rc = at86rf230_write_subreg(lp, SR_IRQ_MASK_MODE, 0);
+ if (rc)
+ return rc;
+
get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
if (rc)
@@ -1362,6 +1367,45 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
usleep_range(lp->data->t_sleep_cycle,
lp->data->t_sleep_cycle + 100);
+ /* xtal_trim value is calculated by:
+ * CL = 0.5 * (CX + CTRIM + CPAR)
+ *
+ * whereas:
+ * CL = capacitor of used crystal
+ * CX = connected capacitors at xtal pins
+ * CPAR = in all at86rf2xx datasheets this is a constant value 3 pF,
+ * but this is different on each board setup. You need to fine
+ * tuning this value via CTRIM.
+ * CTRIM = variable capacitor setting. Resolution is 0.3 pF range is
+ * 0 pF upto 4.5 pF.
+ *
+ * Examples:
+ * atben transceiver:
+ *
+ * CL = 8 pF
+ * CX = 12 pF
+ * CPAR = 3 pF (We assume the magic constant from datasheet)
+ * CTRIM = 0.9 pF
+ *
+ * (12+0.9+3)/2 = 7.95 which is nearly at 8 pF
+ *
+ * xtal_trim = 0x3
+ *
+ * openlabs transceiver:
+ *
+ * CL = 16 pF
+ * CX = 22 pF
+ * CPAR = 3 pF (We assume the magic constant from datasheet)
+ * CTRIM = 4.5 pF
+ *
+ * (22+4.5+3)/2 = 14.75 which is the nearest value to 16 pF
+ *
+ * xtal_trim = 0xf
+ */
+ rc = at86rf230_write_subreg(lp, SR_XTAL_TRIM, xtal_trim);
+ if (rc)
+ return rc;
+
rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &dvdd);
if (rc)
return rc;
@@ -1377,24 +1421,30 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0);
}
-static struct at86rf230_platform_data *
-at86rf230_get_pdata(struct spi_device *spi)
+static int
+at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr,
+ u8 *xtal_trim)
{
- struct at86rf230_platform_data *pdata;
+ struct at86rf230_platform_data *pdata = spi->dev.platform_data;
+ int ret;
- if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node)
- return spi->dev.platform_data;
+ if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) {
+ if (!pdata)
+ return -ENOENT;
- pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- goto done;
+ *rstn = pdata->rstn;
+ *slp_tr = pdata->slp_tr;
+ *xtal_trim = pdata->xtal_trim;
+ return 0;
+ }
- pdata->rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
- pdata->slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
+ *rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
+ *slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
+ ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim);
+ if (ret < 0 && ret != -EINVAL)
+ return ret;
- spi->dev.platform_data = pdata;
-done:
- return pdata;
+ return 0;
}
static int
@@ -1501,43 +1551,43 @@ at86rf230_setup_spi_messages(struct at86rf230_local *lp)
static int at86rf230_probe(struct spi_device *spi)
{
- struct at86rf230_platform_data *pdata;
struct ieee802154_hw *hw;
struct at86rf230_local *lp;
unsigned int status;
- int rc, irq_type;
+ int rc, irq_type, rstn, slp_tr;
+ u8 xtal_trim;
if (!spi->irq) {
dev_err(&spi->dev, "no IRQ specified\n");
return -EINVAL;
}
- pdata = at86rf230_get_pdata(spi);
- if (!pdata) {
- dev_err(&spi->dev, "no platform_data\n");
- return -EINVAL;
+ rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim);
+ if (rc < 0) {
+ dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc);
+ return rc;
}
- if (gpio_is_valid(pdata->rstn)) {
- rc = devm_gpio_request_one(&spi->dev, pdata->rstn,
+ if (gpio_is_valid(rstn)) {
+ rc = devm_gpio_request_one(&spi->dev, rstn,
GPIOF_OUT_INIT_HIGH, "rstn");
if (rc)
return rc;
}
- if (gpio_is_valid(pdata->slp_tr)) {
- rc = devm_gpio_request_one(&spi->dev, pdata->slp_tr,
+ if (gpio_is_valid(slp_tr)) {
+ rc = devm_gpio_request_one(&spi->dev, slp_tr,
GPIOF_OUT_INIT_LOW, "slp_tr");
if (rc)
return rc;
}
/* Reset */
- if (gpio_is_valid(pdata->rstn)) {
+ if (gpio_is_valid(rstn)) {
udelay(1);
- gpio_set_value(pdata->rstn, 0);
+ gpio_set_value(rstn, 0);
udelay(1);
- gpio_set_value(pdata->rstn, 1);
+ gpio_set_value(rstn, 1);
usleep_range(120, 240);
}
@@ -1571,7 +1621,7 @@ static int at86rf230_probe(struct spi_device *spi)
spi_set_drvdata(spi, lp);
- rc = at86rf230_hw_init(lp);
+ rc = at86rf230_hw_init(lp, xtal_trim);
if (rc)
goto free_dev;
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-09 22:37:21 +0000