summaryrefslogtreecommitdiffstats
path: root/drivers/net/gianfar_phy.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/gianfar_phy.h')
-rw-r--r--drivers/net/gianfar_phy.h213
1 files changed, 0 insertions, 213 deletions
diff --git a/drivers/net/gianfar_phy.h b/drivers/net/gianfar_phy.h
deleted file mode 100644
index 1e9b3abf1e6d..000000000000
--- a/drivers/net/gianfar_phy.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * drivers/net/gianfar_phy.h
- *
- * Gianfar Ethernet Driver -- PHY handling
- * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
- * Based on 8260_io/fcc_enet.c
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
- *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifndef __GIANFAR_PHY_H
-#define __GIANFAR_PHY_H
-
-#define MII_end ((u32)-2)
-#define MII_read ((u32)-1)
-
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
-
-#define GFAR_AN_TIMEOUT 2000
-
-/* 1000BT control (Marvell & BCM54xx at least) */
-#define MII_1000BASETCONTROL 0x09
-#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
-#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
-
-/* Cicada Extended Control Register 1 */
-#define MII_CIS8201_EXT_CON1 0x17
-#define MII_CIS8201_EXTCON1_INIT 0x0000
-
-/* Cicada Interrupt Mask Register */
-#define MII_CIS8201_IMASK 0x19
-#define MII_CIS8201_IMASK_IEN 0x8000
-#define MII_CIS8201_IMASK_SPEED 0x4000
-#define MII_CIS8201_IMASK_LINK 0x2000
-#define MII_CIS8201_IMASK_DUPLEX 0x1000
-#define MII_CIS8201_IMASK_MASK 0xf000
-
-/* Cicada Interrupt Status Register */
-#define MII_CIS8201_ISTAT 0x1a
-#define MII_CIS8201_ISTAT_STATUS 0x8000
-#define MII_CIS8201_ISTAT_SPEED 0x4000
-#define MII_CIS8201_ISTAT_LINK 0x2000
-#define MII_CIS8201_ISTAT_DUPLEX 0x1000
-
-/* Cicada Auxiliary Control/Status Register */
-#define MII_CIS8201_AUX_CONSTAT 0x1c
-#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
-#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
-#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
-#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
-#define MII_CIS8201_AUXCONSTAT_100 0x0008
-
-/* 88E1011 PHY Status Register */
-#define MII_M1011_PHY_SPEC_STATUS 0x11
-#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
-#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
-#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
-#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
-#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
-#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
-
-#define MII_M1011_IEVENT 0x13
-#define MII_M1011_IEVENT_CLEAR 0x0000
-
-#define MII_M1011_IMASK 0x12
-#define MII_M1011_IMASK_INIT 0x6400
-#define MII_M1011_IMASK_CLEAR 0x0000
-
-#define MII_DM9161_SCR 0x10
-#define MII_DM9161_SCR_INIT 0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MII_DM9161_SCSR 0x11
-#define MII_DM9161_SCSR_100F 0x8000
-#define MII_DM9161_SCSR_100H 0x4000
-#define MII_DM9161_SCSR_10F 0x2000
-#define MII_DM9161_SCSR_10H 0x1000
-
-/* DM9161 Interrupt Register */
-#define MII_DM9161_INTR 0x15
-#define MII_DM9161_INTR_PEND 0x8000
-#define MII_DM9161_INTR_DPLX_MASK 0x0800
-#define MII_DM9161_INTR_SPD_MASK 0x0400
-#define MII_DM9161_INTR_LINK_MASK 0x0200
-#define MII_DM9161_INTR_MASK 0x0100
-#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
-#define MII_DM9161_INTR_SPD_CHANGE 0x0008
-#define MII_DM9161_INTR_LINK_CHANGE 0x0004
-#define MII_DM9161_INTR_INIT 0x0000
-#define MII_DM9161_INTR_STOP \
-(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
- | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
-
-/* DM9161 10BT Configuration/Status */
-#define MII_DM9161_10BTCSR 0x12
-#define MII_DM9161_10BTCSR_INIT 0x7800
-
-#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
- SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | \
- SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | \
- SUPPORTED_TP | \
- SUPPORTED_MII)
-
-#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | \
- SUPPORTED_1000baseT_Full)
-
-#define MII_READ_COMMAND 0x00000001
-
-#define MII_INTERRUPT_DISABLED 0x0
-#define MII_INTERRUPT_ENABLED 0x1
-/* Taken from mii_if_info and sungem_phy.h */
-struct gfar_mii_info {
- /* Information about the PHY type */
- /* And management functions */
- struct phy_info *phyinfo;
-
- /* forced speed & duplex (no autoneg)
- * partner speed & duplex & pause (autoneg)
- */
- int speed;
- int duplex;
- int pause;
-
- /* The most recently read link state */
- int link;
-
- /* Enabled Interrupts */
- u32 interrupts;
-
- u32 advertising;
- int autoneg;
- int mii_id;
-
- /* private data pointer */
- /* For use by PHYs to maintain extra state */
- void *priv;
-
- /* Provided by host chip */
- struct net_device *dev;
-
- /* A lock to ensure that only one thing can read/write
- * the MDIO bus at a time */
- spinlock_t mdio_lock;
-
- /* Provided by ethernet driver */
- int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
- void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY. During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is. The 32-bit result
- * gotten from the PHY will be ANDed with phy_id_mask to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * There are 6 commands which take a gfar_mii_info structure.
- * Each PHY must declare config_aneg, and read_status.
- */
-struct phy_info {
- u32 phy_id;
- char *name;
- unsigned int phy_id_mask;
- u32 features;
-
- /* Called to initialize the PHY */
- int (*init)(struct gfar_mii_info *mii_info);
-
- /* Called to suspend the PHY for power */
- int (*suspend)(struct gfar_mii_info *mii_info);
-
- /* Reconfigures autonegotiation (or disables it) */
- int (*config_aneg)(struct gfar_mii_info *mii_info);
-
- /* Determines the negotiated speed and duplex */
- int (*read_status)(struct gfar_mii_info *mii_info);
-
- /* Clears any pending interrupts */
- int (*ack_interrupt)(struct gfar_mii_info *mii_info);
-
- /* Enables or disables interrupts */
- int (*config_intr)(struct gfar_mii_info *mii_info);
-
- /* Clears up any memory if needed */
- void (*close)(struct gfar_mii_info *mii_info);
-};
-
-struct phy_info *get_phy_info(struct gfar_mii_info *mii_info);
-int read_phy_reg(struct net_device *dev, int mii_id, int regnum);
-void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value);
-void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info);
-void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts);
-
-struct dm9161_private {
- struct timer_list timer;
- int resetdone;
-};
-
-#endif /* GIANFAR_PHY_H */