diff options
Diffstat (limited to 'drivers/net/fec.c')
| -rw-r--r-- | drivers/net/fec.c | 1140 |
1 files changed, 256 insertions, 884 deletions
diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 9b4e8f797a7a..42d9ac9ba395 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -40,6 +40,7 @@ #include <linux/irq.h> #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/phy.h> #include <asm/cacheflush.h> @@ -61,7 +62,6 @@ * Define the fixed address of the FEC hardware. */ #if defined(CONFIG_M5272) -#define HAVE_mii_link_interrupt static unsigned char fec_mac_default[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -86,23 +86,6 @@ static unsigned char fec_mac_default[] = { #endif #endif /* CONFIG_M5272 */ -/* Forward declarations of some structures to support different PHYs */ - -typedef struct { - uint mii_data; - void (*funct)(uint mii_reg, struct net_device *dev); -} phy_cmd_t; - -typedef struct { - uint id; - char *name; - - const phy_cmd_t *config; - const phy_cmd_t *startup; - const phy_cmd_t *ack_int; - const phy_cmd_t *shutdown; -} phy_info_t; - /* The number of Tx and Rx buffers. These are allocated from the page * pool. The code may assume these are power of two, so it it best * to keep them that size. @@ -189,29 +172,21 @@ struct fec_enet_private { uint tx_full; /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */ spinlock_t hw_lock; - /* hold while accessing the mii_list_t() elements */ - spinlock_t mii_lock; - - uint phy_id; - uint phy_id_done; - uint phy_status; - uint phy_speed; - phy_info_t const *phy; - struct work_struct phy_task; - uint sequence_done; - uint mii_phy_task_queued; + struct platform_device *pdev; - uint phy_addr; + int opened; + /* Phylib and MDIO interface */ + struct mii_bus *mii_bus; + struct phy_device *phy_dev; + int mii_timeout; + uint phy_speed; int index; - int opened; int link; - int old_link; int full_duplex; }; -static void fec_enet_mii(struct net_device *dev); static irqreturn_t fec_enet_interrupt(int irq, void * dev_id); static void fec_enet_tx(struct net_device *dev); static void fec_enet_rx(struct net_device *dev); @@ -219,67 +194,20 @@ static int fec_enet_close(struct net_device *dev); static void fec_restart(struct net_device *dev, int duplex); static void fec_stop(struct net_device *dev); +/* FEC MII MMFR bits definition */ +#define FEC_MMFR_ST (1 << 30) +#define FEC_MMFR_OP_READ (2 << 28) +#define FEC_MMFR_OP_WRITE (1 << 28) +#define FEC_MMFR_PA(v) ((v & 0x1f) << 23) +#define FEC_MMFR_RA(v) ((v & 0x1f) << 18) +#define FEC_MMFR_TA (2 << 16) +#define FEC_MMFR_DATA(v) (v & 0xffff) -/* MII processing. We keep this as simple as possible. Requests are - * placed on the list (if there is room). When the request is finished - * by the MII, an optional function may be called. - */ -typedef struct mii_list { - uint mii_regval; - void (*mii_func)(uint val, struct net_device *dev); - struct mii_list *mii_next; -} mii_list_t; - -#define NMII 20 -static mii_list_t mii_cmds[NMII]; -static mii_list_t *mii_free; -static mii_list_t *mii_head; -static mii_list_t *mii_tail; - -static int mii_queue(struct net_device *dev, int request, - void (*func)(uint, struct net_device *)); - -/* Make MII read/write commands for the FEC */ -#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) -#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \ - (VAL & 0xffff)) -#define mk_mii_end 0 +#define FEC_MII_TIMEOUT 10000 /* Transmitter timeout */ #define TX_TIMEOUT (2 * HZ) -/* Register definitions for the PHY */ - -#define MII_REG_CR 0 /* Control Register */ -#define MII_REG_SR 1 /* Status Register */ -#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */ -#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */ -#define MII_REG_ANAR 4 /* A-N Advertisement Register */ -#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */ -#define MII_REG_ANER 6 /* A-N Expansion Register */ -#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */ -#define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */ - -/* values for phy_status */ - -#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */ -#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ -#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ -#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ -#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ -#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ -#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ - -#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ -#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ -#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ -#define PHY_STAT_SPMASK 0xf000 /* mask for speed */ -#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ -#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ -#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ - - static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) { @@ -347,8 +275,6 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) | BD_ENET_TX_LAST | BD_ENET_TX_TC); bdp->cbd_sc = status; - dev->trans_start = jiffies; - /* Trigger transmission start */ writel(0, fep->hwp + FEC_X_DES_ACTIVE); @@ -406,12 +332,6 @@ fec_enet_interrupt(int irq, void * dev_id) ret = IRQ_HANDLED; fec_enet_tx(dev); } - - if (int_events & FEC_ENET_MII) { - ret = IRQ_HANDLED; - fec_enet_mii(dev); - } - } while (int_events); return ret; @@ -607,827 +527,311 @@ rx_processing_done: spin_unlock(&fep->hw_lock); } -/* called from interrupt context */ -static void -fec_enet_mii(struct net_device *dev) -{ - struct fec_enet_private *fep; - mii_list_t *mip; - - fep = netdev_priv(dev); - spin_lock(&fep->mii_lock); - - if ((mip = mii_head) == NULL) { - printk("MII and no head!\n"); - goto unlock; - } - - if (mip->mii_func != NULL) - (*(mip->mii_func))(readl(fep->hwp + FEC_MII_DATA), dev); - - mii_head = mip->mii_next; - mip->mii_next = mii_free; - mii_free = mip; - - if ((mip = mii_head) != NULL) - writel(mip->mii_regval, fep->hwp + FEC_MII_DATA); - -unlock: - spin_unlock(&fep->mii_lock); -} - -static int -mii_queue_unlocked(struct net_device *dev, int regval, - void (*func)(uint, struct net_device *)) +/* ------------------------------------------------------------------------- */ +#ifdef CONFIG_M5272 +static void __inline__ fec_get_mac(struct net_device *dev) { - struct fec_enet_private *fep; - mii_list_t *mip; - int retval; - - /* Add PHY address to register command */ - fep = netdev_priv(dev); + struct fec_enet_private *fep = netdev_priv(dev); + unsigned char *iap, tmpaddr[ETH_ALEN]; - regval |= fep->phy_addr << 23; - retval = 0; - - if ((mip = mii_free) != NULL) { - mii_free = mip->mii_next; - mip->mii_regval = regval; - mip->mii_func = func; - mip->mii_next = NULL; - if (mii_head) { - mii_tail->mii_next = mip; - mii_tail = mip; - } else { - mii_head = mii_tail = mip; - writel(regval, fep->hwp + FEC_MII_DATA); - } + if (FEC_FLASHMAC) { + /* + * Get MAC address from FLASH. + * If it is all 1's or 0's, use the default. + */ + iap = (unsigned char *)FEC_FLASHMAC; + if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && + (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) + iap = fec_mac_default; + if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && + (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) + iap = fec_mac_default; } else { - retval = 1; + *((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW); + *((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16); + iap = &tmpaddr[0]; } - return retval; -} - -static int -mii_queue(struct net_device *dev, int regval, - void (*func)(uint, struct net_device *)) -{ - struct fec_enet_private *fep; - unsigned long flags; - int retval; - fep = netdev_priv(dev); - spin_lock_irqsave(&fep->mii_lock, flags); - retval = mii_queue_unlocked(dev, regval, func); - spin_unlock_irqrestore(&fep->mii_lock, flags); - return retval; -} - -static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c) -{ - if(!c) - return; + memcpy(dev->dev_addr, iap, ETH_ALEN); - for (; c->mii_data != mk_mii_end; c++) - mii_queue(dev, c->mii_data, c->funct); + /* Adjust MAC if using default MAC address */ + if (iap == fec_mac_default) + dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; } +#endif -static void mii_parse_sr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); - - if (mii_reg & 0x0004) - status |= PHY_STAT_LINK; - if (mii_reg & 0x0010) - status |= PHY_STAT_FAULT; - if (mii_reg & 0x0020) - status |= PHY_STAT_ANC; - *s = status; -} +/* ------------------------------------------------------------------------- */ -static void mii_parse_cr(uint mii_reg, struct net_device *dev) +/* + * Phy section + */ +static void fec_enet_adjust_link(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_CONF_ANE | PHY_CONF_LOOP); - - if (mii_reg & 0x1000) - status |= PHY_CONF_ANE; - if (mii_reg & 0x4000) - status |= PHY_CONF_LOOP; - *s = status; -} + struct phy_device *phy_dev = fep->phy_dev; + unsigned long flags; -static void mii_parse_anar(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_CONF_SPMASK); - - if (mii_reg & 0x0020) - status |= PHY_CONF_10HDX; - if (mii_reg & 0x0040) - status |= PHY_CONF_10FDX; - if (mii_reg & 0x0080) - status |= PHY_CONF_100HDX; - if (mii_reg & 0x00100) - status |= PHY_CONF_100FDX; - *s = status; -} + int status_change = 0; -/* ------------------------------------------------------------------------- */ -/* The Level one LXT970 is used by many boards */ + spin_lock_irqsave(&fep->hw_lock, flags); -#define MII_LXT970_MIRROR 16 /* Mirror register */ -#define MII_LXT970_IER 17 /* Interrupt Enable Register */ -#define MII_LXT970_ISR 18 /* Interrupt Status Register */ -#define MII_LXT970_CONFIG 19 /* Configuration Register */ -#define MII_LXT970_CSR 20 /* Chip Status Register */ + /* Prevent a state halted on mii error */ + if (fep->mii_timeout && phy_dev->state == PHY_HALTED) { + phy_dev->state = PHY_RESUMING; + goto spin_unlock; + } -static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; + /* Duplex link change */ + if (phy_dev->link) { + if (fep->full_duplex != phy_dev->duplex) { + fec_restart(dev, phy_dev->duplex); + status_change = 1; + } + } - status = *s & ~(PHY_STAT_SPMASK); - if (mii_reg & 0x0800) { - if (mii_reg & 0x1000) - status |= PHY_STAT_100FDX; - else - status |= PHY_STAT_100HDX; - } else { - if (mii_reg & 0x1000) - status |= PHY_STAT_10FDX; + /* Link on or off change */ + if (phy_dev->link != fep->link) { + fep->link = phy_dev->link; + if (phy_dev->link) + fec_restart(dev, phy_dev->duplex); else - status |= PHY_STAT_10HDX; + fec_stop(dev); + status_change = 1; } - *s = status; -} -static phy_cmd_t const phy_cmd_lxt970_config[] = { - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt970_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_LXT970_IER, 0x0002), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt970_ack_int[] = { - /* read SR and ISR to acknowledge */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_LXT970_ISR), NULL }, - - /* find out the current status */ - { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_LXT970_IER, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_lxt970 = { - .id = 0x07810000, - .name = "LXT970", - .config = phy_cmd_lxt970_config, - .startup = phy_cmd_lxt970_startup, - .ack_int = phy_cmd_lxt970_ack_int, - .shutdown = phy_cmd_lxt970_shutdown -}; - -/* ------------------------------------------------------------------------- */ -/* The Level one LXT971 is used on some of my custom boards */ - -/* register definitions for the 971 */ +spin_unlock: + spin_unlock_irqrestore(&fep->hw_lock, flags); -#define MII_LXT971_PCR 16 /* Port Control Register */ -#define MII_LXT971_SR2 17 /* Status Register 2 */ -#define MII_LXT971_IER 18 /* Interrupt Enable Register */ -#define MII_LXT971_ISR 19 /* Interrupt Status Register */ -#define MII_LXT971_LCR 20 /* LED Control Register */ -#define MII_LXT971_TCR 30 /* Transmit Control Register */ + if (status_change) + phy_print_status(phy_dev); +} /* - * I had some nice ideas of running the MDIO faster... - * The 971 should support 8MHz and I tried it, but things acted really - * weird, so 2.5 MHz ought to be enough for anyone... + * NOTE: a MII transaction is during around 25 us, so polling it... */ - -static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) +static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; + struct fec_enet_private *fep = bus->priv; + int timeout = FEC_MII_TIMEOUT; - status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); + fep->mii_timeout = 0; - if (mii_reg & 0x0400) { - fep->link = 1; - status |= PHY_STAT_LINK; - } else { - fep->link = 0; - } - if (mii_reg & 0x0080) - status |= PHY_STAT_ANC; - if (mii_reg & 0x4000) { - if (mii_reg & 0x0200) - status |= PHY_STAT_100FDX; - else - status |= PHY_STAT_100HDX; - } else { - if (mii_reg & 0x0200) - status |= PHY_STAT_10FDX; - else - status |= PHY_STAT_10HDX; + /* clear MII end of transfer bit*/ + writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT); + + /* start a read op */ + writel(FEC_MMFR_ST | FEC_MMFR_OP_READ | + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) | + FEC_MMFR_TA, fep->hwp + FEC_MII_DATA); + + /* wait for end of transfer */ + while (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_MII)) { + cpu_relax(); + if (timeout-- < 0) { + fep->mii_timeout = 1; + printk(KERN_ERR "FEC: MDIO read timeout\n"); + return -ETIMEDOUT; + } } - if (mii_reg & 0x0008) - status |= PHY_STAT_FAULT; - *s = status; + /* return value */ + return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA)); } -static phy_cmd_t const phy_cmd_lxt971_config[] = { - /* limit to 10MBit because my prototype board - * doesn't work with 100. */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_write(MII_LXT971_LCR, 0xd422), NULL }, /* LED config */ - /* Somehow does the 971 tell me that the link is down - * the first read after power-up. - * read here to get a valid value in ack_int */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt971_ack_int[] = { - /* acknowledge the int before reading status ! */ - { mk_mii_read(MII_LXT971_ISR), NULL }, - /* find out the current status */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_LXT971_IER, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_lxt971 = { - .id = 0x0001378e, - .name = "LXT971", - .config = phy_cmd_lxt971_config, - .startup = phy_cmd_lxt971_startup, - .ack_int = phy_cmd_lxt971_ack_int, - .shutdown = phy_cmd_lxt971_shutdown -}; - -/* ------------------------------------------------------------------------- */ -/* The Quality Semiconductor QS6612 is used on the RPX CLLF */ - -/* register definitions */ - -#define MII_QS6612_MCR 17 /* Mode Control Register */ -#define MII_QS6612_FTR 27 /* Factory Test Register */ -#define MII_QS6612_MCO 28 /* Misc. Control Register */ -#define MII_QS6612_ISR 29 /* Interrupt Source Register */ -#define MII_QS6612_IMR 30 /* Interrupt Mask Register */ -#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ - -static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) +static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum, + u16 value) { - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_STAT_SPMASK); + struct fec_enet_private *fep = bus->priv; + int timeout = FEC_MII_TIMEOUT; - switch((mii_reg >> 2) & 7) { - case 1: status |= PHY_STAT_10HDX; break; - case 2: status |= PHY_STAT_100HDX; break; - case 5: status |= PHY_STAT_10FDX; break; - case 6: status |= PHY_STAT_100FDX; break; -} - - *s = status; -} + fep->mii_timeout = 0; -static phy_cmd_t const phy_cmd_qs6612_config[] = { - /* The PHY powers up isolated on the RPX, - * so send a command to allow operation. - */ - { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL }, - - /* parse cr and anar to get some info */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_qs6612_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_qs6612_ack_int[] = { - /* we need to read ISR, SR and ANER to acknowledge */ - { mk_mii_read(MII_QS6612_ISR), NULL }, - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_REG_ANER), NULL }, - - /* read pcr to get info */ - { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_qs6612 = { - .id = 0x00181440, - .name = "QS6612", - .config = phy_cmd_qs6612_config, - .startup = phy_cmd_qs6612_startup, - .ack_int = phy_cmd_qs6612_ack_int, - .shutdown = phy_cmd_qs6612_shutdown -}; - -/* ------------------------------------------------------------------------- */ -/* AMD AM79C874 phy */ + /* clear MII end of transfer bit*/ + writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT); -/* register definitions for the 874 */ + /* start a read op */ + writel(FEC_MMFR_ST | FEC_MMFR_OP_READ | + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) | + FEC_MMFR_TA | FEC_MMFR_DATA(value), + fep->hwp + FEC_MII_DATA); + + /* wait for end of transfer */ + while (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_MII)) { + cpu_relax(); + if (timeout-- < 0) { + fep->mii_timeout = 1; + printk(KERN_ERR "FEC: MDIO write timeout\n"); + return -ETIMEDOUT; + } + } -#define MII_AM79C874_MFR 16 /* Miscellaneous Feature Register */ -#define MII_AM79C874_ICSR 17 /* Interrupt/Status Register */ -#define MII_AM79C874_DR 18 /* Diagnostic Register */ -#define MII_AM79C874_PMLR 19 /* Power and Loopback Register */ -#define MII_AM79C874_MCR 21 /* ModeControl Register */ -#define MII_AM79C874_DC 23 /* Disconnect Counter */ -#define MII_AM79C874_REC 24 /* Recieve Error Counter */ + return 0; +} -static void mii_parse_am79c874_dr(uint mii_reg, struct net_device *dev) +static int fec_enet_mdio_reset(struct mii_bus *bus) { - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_ANC); - - if (mii_reg & 0x0080) - status |= PHY_STAT_ANC; - if (mii_reg & 0x0400) - status |= ((mii_reg & 0x0800) ? PHY_STAT_100FDX : PHY_STAT_100HDX); - else - status |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX); - - *s = status; + return 0; } -static phy_cmd_t const phy_cmd_am79c874_config[] = { - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_am79c874_ack_int[] = { - /* find out the current status */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, - /* we only need to read ISR to acknowledge */ - { mk_mii_read(MII_AM79C874_ICSR), NULL }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_am79c874_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_am79c874 = { - .id = 0x00022561, - .name = "AM79C874", - .config = phy_cmd_am79c874_config, - .startup = phy_cmd_am79c874_startup, - .ack_int = phy_cmd_am79c874_ack_int, - .shutdown = phy_cmd_am79c874_shutdown -}; - - -/* ------------------------------------------------------------------------- */ -/* Kendin KS8721BL phy */ - -/* register definitions for the 8721 */ - -#define MII_KS8721BL_RXERCR 21 -#define MII_KS8721BL_ICSR 27 -#define MII_KS8721BL_PHYCR 31 - -static phy_cmd_t const phy_cmd_ks8721bl_config[] = { - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = { - /* find out the current status */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - /* we only need to read ISR to acknowledge */ - { mk_mii_read(MII_KS8721BL_ICSR), NULL }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_KS8721BL_ICSR, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_ks8721bl = { - .id = 0x00022161, - .name = "KS8721BL", - .config = phy_cmd_ks8721bl_config, - .startup = phy_cmd_ks8721bl_startup, - .ack_int = phy_cmd_ks8721bl_ack_int, - .shutdown = phy_cmd_ks8721bl_shutdown -}; - -/* ------------------------------------------------------------------------- */ -/* register definitions for the DP83848 */ - -#define MII_DP8384X_PHYSTST 16 /* PHY Status Register */ - -static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev) +static int fec_enet_mii_probe(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - - *s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); - - /* Link up */ - if (mii_reg & 0x0001) { - fep->link = 1; - *s |= PHY_STAT_LINK; - } else - fep->link = 0; - /* Status of link */ - if (mii_reg & 0x0010) /* Autonegotioation complete */ - *s |= PHY_STAT_ANC; - if (mii_reg & 0x0002) { /* 10MBps? */ - if (mii_reg & 0x0004) /* Full Duplex? */ - *s |= PHY_STAT_10FDX; - else - *s |= PHY_STAT_10HDX; - } else { /* 100 Mbps? */ - if (mii_reg & 0x0004) /* Full Duplex? */ - *s |= PHY_STAT_100FDX; - else - *s |= PHY_STAT_100HDX; - } - if (mii_reg & 0x0008) - *s |= PHY_STAT_FAULT; -} + struct phy_device *phy_dev = NULL; + int phy_addr; -static phy_info_t phy_info_dp83848= { - 0x020005c9, - "DP83848", - - (const phy_cmd_t []) { /* config */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */ - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown */ - { mk_mii_end, } - }, -}; + /* find the first phy */ + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + if (fep->mii_bus->phy_map[phy_addr]) { + phy_dev = fep->mii_bus->phy_map[phy_addr]; + break; + } + } -static phy_info_t phy_info_lan8700 = { - 0x0007C0C, - "LAN8700", - (const phy_cmd_t []) { /* config */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup */ - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* act_int */ - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown */ - { mk_mii_end, } - }, -}; -/* ------------------------------------------------------------------------- */ + if (!phy_dev) { + printk(KERN_ERR "%s: no PHY found\n", dev->name); + return -ENODEV; + } -static phy_info_t const * const phy_info[] = { - &phy_info_lxt970, - &phy_info_lxt971, - &phy_info_qs6612, - &phy_info_am79c874, - &phy_info_ks8721bl, - &phy_info_dp83848, - &phy_info_lan8700, - NULL -}; + /* attach the mac to the phy */ + phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), + &fec_enet_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + if (IS_ERR(phy_dev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phy_dev); + } -/* ------------------------------------------------------------------------- */ -#ifdef HAVE_mii_link_interrupt -static irqreturn_t -mii_link_interrupt(int irq, void * dev_id); + /* mask with MAC supported features */ + phy_dev->supported &= PHY_BASIC_FEATURES; + phy_dev->advertising = phy_dev->supported; -/* - * This is specific to the MII interrupt setup of the M5272EVB. - */ -static void __inline__ fec_request_mii_intr(struct net_device *dev) -{ - if (request_irq(66, mii_link_interrupt, IRQF_DISABLED, "fec(MII)", dev) != 0) - printk("FEC: Could not allocate fec(MII) IRQ(66)!\n"); -} + fep->phy_dev = phy_dev; + fep->link = 0; + fep->full_duplex = 0; -static void __inline__ fec_disable_phy_intr(struct net_device *dev) -{ - free_irq(66, dev); + return 0; } -#endif -#ifdef CONFIG_M5272 -static void __inline__ fec_get_mac(struct net_device *dev) +static int fec_enet_mii_init(struct platform_device *pdev) { + struct net_device *dev = platform_get_drvdata(pdev); struct fec_enet_private *fep = netdev_priv(dev); - unsigned char *iap, tmpaddr[ETH_ALEN]; + int err = -ENXIO, i; - if (FEC_FLASHMAC) { - /* - * Get MAC address from FLASH. - * If it is all 1's or 0's, use the default. - */ - iap = (unsigned char *)FEC_FLASHMAC; - if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && - (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) - iap = fec_mac_default; - if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && - (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) - iap = fec_mac_default; - } else { - *((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW); - *((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16); - iap = &tmpaddr[0]; - } + fep->mii_timeout = 0; - memcpy(dev->dev_addr, iap, ETH_ALEN); - - /* Adjust MAC if using default MAC address */ - if (iap == fec_mac_default) - dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; -} -#endif - -/* ------------------------------------------------------------------------- */ - -static void mii_display_status(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); + /* + * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed) + */ + fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000) << 1; + writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); - if (!fep->link && !fep->old_link) { - /* Link is still down - don't print anything */ - return; + fep->mii_bus = mdiobus_alloc(); + if (fep->mii_bus == NULL) { + err = -ENOMEM; + goto err_out; } - printk("%s: status: ", dev->name); - - if (!fep->link) { - printk("link down"); - } else { - printk("link up"); - - switch(*s & PHY_STAT_SPMASK) { - case PHY_STAT_100FDX: printk(", 100MBit Full Duplex"); break; - case PHY_STAT_100HDX: printk(", 100MBit Half Duplex"); break; - case PHY_STAT_10FDX: printk(", 10MBit Full Duplex"); break; - case PHY_STAT_10HDX: printk(", 10MBit Half Duplex"); break; - default: - printk(", Unknown speed/duplex"); - } - - if (*s & PHY_STAT_ANC) - printk(", auto-negotiation complete"); + fep->mii_bus->name = "fec_enet_mii_bus"; + fep->mii_bus->read = fec_enet_mdio_read; + fep->mii_bus->write = fec_enet_mdio_write; + fep->mii_bus->reset = fec_enet_mdio_reset; + snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); + fep->mii_bus->priv = fep; + fep->mii_bus->parent = &pdev->dev; + + fep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!fep->mii_bus->irq) { + err = -ENOMEM; + goto err_out_free_mdiobus; } - if (*s & PHY_STAT_FAULT) - printk(", remote fault"); - - printk(".\n"); -} - -static void mii_display_config(struct work_struct *work) -{ - struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task); - struct net_device *dev = fep->netdev; - uint status = fep->phy_status; + for (i = 0; i < PHY_MAX_ADDR; i++) + fep->mii_bus->irq[i] = PHY_POLL; - /* - ** When we get here, phy_task is already removed from - ** the workqueue. It is thus safe to allow to reuse it. - */ - fep->mii_phy_task_queued = 0; - printk("%s: config: auto-negotiation ", dev->name); - - if (status & PHY_CONF_ANE) - printk("on"); - else - printk("off"); + platform_set_drvdata(dev, fep->mii_bus); - if (status & PHY_CONF_100FDX) - printk(", 100FDX"); - if (status & PHY_CONF_100HDX) - printk(", 100HDX"); - if (status & PHY_CONF_10FDX) - printk(", 10FDX"); - if (status & PHY_CONF_10HDX) - printk(", 10HDX"); - if (!(status & PHY_CONF_SPMASK)) - printk(", No speed/duplex selected?"); + if (mdiobus_register(fep->mii_bus)) + goto err_out_free_mdio_irq; - if (status & PHY_CONF_LOOP) - printk(", loopback enabled"); + if (fec_enet_mii_probe(dev) != 0) + goto err_out_unregister_bus; - printk(".\n"); + return 0; - fep->sequence_done = 1; +err_out_unregister_bus: + mdiobus_unregister(fep->mii_bus); +err_out_free_mdio_irq: + kfree(fep->mii_bus->irq); +err_out_free_mdiobus: + mdiobus_free(fep->mii_bus); +err_out: + return err; } -static void mii_relink(struct work_struct *work) +static void fec_enet_mii_remove(struct fec_enet_private *fep) { - struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task); - struct net_device *dev = fep->netdev; - int duplex; - - /* - ** When we get here, phy_task is already removed from - ** the workqueue. It is thus safe to allow to reuse it. - */ - fep->mii_phy_task_queued = 0; - fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0; - mii_display_status(dev); - fep->old_link = fep->link; - - if (fep->link) { - duplex = 0; - if (fep->phy_status - & (PHY_STAT_100FDX | PHY_STAT_10FDX)) - duplex = 1; - fec_restart(dev, duplex); - } else - fec_stop(dev); + if (fep->phy_dev) + phy_disconnect(fep->phy_dev); + mdiobus_unregister(fep->mii_bus); + kfree(fep->mii_bus->irq); + mdiobus_free(fep->mii_bus); } -/* mii_queue_relink is called in interrupt context from mii_link_interrupt */ -static void mii_queue_relink(uint mii_reg, struct net_device *dev) +static int fec_enet_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) { struct fec_enet_private *fep = netdev_priv(dev); + struct phy_device *phydev = fep->phy_dev; - /* - * We cannot queue phy_task twice in the workqueue. It - * would cause an endless loop in the workqueue. - * Fortunately, if the last mii_relink entry has not yet been - * executed now, it will do the job for the current interrupt, - * which is just what we want. - */ - if (fep->mii_phy_task_queued) - return; + if (!phydev) + return -ENODEV; - fep->mii_phy_task_queued = 1; - INIT_WORK(&fep->phy_task, mii_relink); - schedule_work(&fep->phy_task); + return phy_ethtool_gset(phydev, cmd); } -/* mii_queue_config is called in interrupt context from fec_enet_mii */ -static void mii_queue_config(uint mii_reg, struct net_device *dev) +static int fec_enet_set_settings(struct net_device *dev, + struct ethtool_cmd *cmd) { struct fec_enet_private *fep = netdev_priv(dev); + struct phy_device *phydev = fep->phy_dev; - if (fep->mii_phy_task_queued) - return; + if (!phydev) + return -ENODEV; - fep->mii_phy_task_queued = 1; - INIT_WORK(&fep->phy_task, mii_display_config); - schedule_work(&fep->phy_task); + return phy_ethtool_sset(phydev, cmd); } -phy_cmd_t const phy_cmd_relink[] = { - { mk_mii_read(MII_REG_CR), mii_queue_relink }, - { mk_mii_end, } - }; -phy_cmd_t const phy_cmd_config[] = { - { mk_mii_read(MII_REG_CR), mii_queue_config }, - { mk_mii_end, } - }; - -/* Read remainder of PHY ID. */ -static void -mii_discover_phy3(uint mii_reg, struct net_device *dev) +static void fec_enet_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) { - struct fec_enet_private *fep; - int i; - - fep = netdev_priv(dev); - fep->phy_id |= (mii_reg & 0xffff); - printk("fec: PHY @ 0x%x, ID 0x%08x", fep->phy_addr, fep->phy_id); - - for(i = 0; phy_info[i]; i++) { - if(phy_info[i]->id == (fep->phy_id >> 4)) - break; - } - - if (phy_info[i]) - printk(" -- %s\n", phy_info[i]->name); - else - printk(" -- unknown PHY!\n"); + struct fec_enet_private *fep = netdev_priv(dev); - fep->phy = phy_info[i]; - fep->phy_id_done = 1; + strcpy(info->driver, fep->pdev->dev.driver->name); + strcpy(info->version, "Revision: 1.0"); + strcpy(info->bus_info, dev_name(&dev->dev)); } -/* Scan all of the MII PHY addresses looking for someone to respond - * with a valid ID. This usually happens quickly. - */ -static void -mii_discover_phy(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep; - uint phytype; - - fep = netdev_priv(dev); - - if (fep->phy_addr < 32) { - if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) { - - /* Got first part of ID, now get remainder */ - fep->phy_id = phytype << 16; - mii_queue_unlocked(dev, mk_mii_read(MII_REG_PHYIR2), - mii_discover_phy3); - } else { - fep->phy_addr++; - mii_queue_unlocked(dev, mk_mii_read(MII_REG_PHYIR1), - mii_discover_phy); - } - } else { - printk("FEC: No PHY device found.\n"); - /* Disable external MII interface */ - writel(0, fep->hwp + FEC_MII_SPEED); - fep->phy_speed = 0; -#ifdef HAVE_mii_link_interrupt - fec_disable_phy_intr(dev); -#endif - } -} +static struct ethtool_ops fec_enet_ethtool_ops = { + .get_settings = fec_enet_get_settings, + .set_settings = fec_enet_set_settings, + .get_drvinfo = fec_enet_get_drvinfo, + .get_link = ethtool_op_get_link, +}; -/* This interrupt occurs when the PHY detects a link change */ -#ifdef HAVE_mii_link_interrupt -static irqreturn_t -mii_link_interrupt(int irq, void * dev_id) +static int fec_enet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { - struct net_device *dev = dev_id; struct fec_enet_private *fep = netdev_priv(dev); + struct phy_device *phydev = fep->phy_dev; + + if (!netif_running(dev)) + return -EINVAL; - mii_do_cmd(dev, fep->phy->ack_int); - mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */ + if (!phydev) + return -ENODEV; - return IRQ_HANDLED; + return phy_mii_ioctl(phydev, if_mii(rq), cmd); } -#endif static void fec_enet_free_buffers(struct net_device *dev) { @@ -1509,35 +913,8 @@ fec_enet_open(struct net_device *dev) if (ret) return ret; - fep->sequence_done = 0; - fep->link = 0; - - fec_restart(dev, 1); - - if (fep->phy) { - mii_do_cmd(dev, fep->phy->ack_int); - mii_do_cmd(dev, fep->phy->config); - mii_do_cmd(dev, phy_cmd_config); /* display configuration */ - - /* Poll until the PHY tells us its configuration - * (not link state). - * Request is initiated by mii_do_cmd above, but answer - * comes by interrupt. - * This should take about 25 usec per register at 2.5 MHz, - * and we read approximately 5 registers. - */ - while(!fep->sequence_done) - schedule(); - - mii_do_cmd(dev, fep->phy->startup); - } - - /* Set the initial link state to true. A lot of hardware - * based on this device does not implement a PHY interrupt, - * so we are never notified of link change. - */ - fep->link = 1; - + /* schedule a link state check */ + phy_start(fep->phy_dev); netif_start_queue(dev); fep->opened = 1; return 0; @@ -1550,6 +927,7 @@ fec_enet_close(struct net_device *dev) /* Don't know what to do yet. */ fep->opened = 0; + phy_stop(fep->phy_dev); netif_stop_queue(dev); fec_stop(dev); @@ -1574,7 +952,7 @@ fec_enet_close(struct net_device *dev) static void set_multicast_list(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); - struct dev_mc_list *dmi; + struct netdev_hw_addr *ha; unsigned int i, bit, data, crc, tmp; unsigned char hash; @@ -1604,16 +982,16 @@ static void set_multicast_list(struct net_device *dev) writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); - netdev_for_each_mc_addr(dmi, dev) { + netdev_for_each_mc_addr(ha, dev) { /* Only support group multicast for now */ - if (!(dmi->dmi_addr[0] & 1)) + if (!(ha->addr[0] & 1)) continue; /* calculate crc32 value of mac address */ crc = 0xffffffff; - for (i = 0; i < dmi->dmi_addrlen; i++) { - data = dmi->dmi_addr[i]; + for (i = 0; i < dev->addr_len; i++) { + data = ha->addr[i]; for (bit = 0; bit < 8; bit++, data >>= 1) { crc = (crc >> 1) ^ (((crc ^ data) & 1) ? CRC32_POLY : 0); @@ -1666,6 +1044,7 @@ static const struct net_device_ops fec_netdev_ops = { .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = fec_timeout, .ndo_set_mac_address = fec_set_mac_address, + .ndo_do_ioctl = fec_enet_ioctl, }; /* @@ -1689,7 +1068,6 @@ static int fec_enet_init(struct net_device *dev, int index) } spin_lock_init(&fep->hw_lock); - spin_lock_init(&fep->mii_lock); fep->index = index; fep->hwp = (void __iomem *)dev->base_addr; @@ -1716,20 +1094,10 @@ static int fec_enet_init(struct net_device *dev, int index) fep->rx_bd_base = cbd_base; fep->tx_bd_base = cbd_base + RX_RING_SIZE; -#ifdef HAVE_mii_link_interrupt - fec_request_mii_intr(dev); -#endif /* The FEC Ethernet specific entries in the device structure */ dev->watchdog_timeo = TX_TIMEOUT; dev->netdev_ops = &fec_netdev_ops; - - for (i=0; i<NMII-1; i++) - mii_cmds[i].mii_next = &mii_cmds[i+1]; - mii_free = mii_cmds; - - /* Set MII speed to 2.5 MHz */ - fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999) - / 2500000) / 2) & 0x3F) << 1; + dev->ethtool_ops = &fec_enet_ethtool_ops; /* Initialize the receive buffer descriptors. */ bdp = fep->rx_bd_base; @@ -1760,13 +1128,6 @@ static int fec_enet_init(struct net_device *dev, int index) fec_restart(dev, 0); - /* Queue up command to detect the PHY and initialize the - * remainder of the interface. - */ - fep->phy_id_done = 0; - fep->phy_addr = 0; - mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); - return 0; } @@ -1835,8 +1196,7 @@ fec_restart(struct net_device *dev, int duplex) writel(0, fep->hwp + FEC_R_DES_ACTIVE); /* Enable interrupts we wish to service */ - writel(FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII, - fep->hwp + FEC_IMASK); + writel(FEC_ENET_TXF | FEC_ENET_RXF, fep->hwp + FEC_IMASK); } static void @@ -1859,7 +1219,6 @@ fec_stop(struct net_device *dev) /* Clear outstanding MII command interrupts. */ writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT); - writel(FEC_ENET_MII, fep->hwp + FEC_IMASK); writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); } @@ -1891,6 +1250,7 @@ fec_probe(struct platform_device *pdev) memset(fep, 0, sizeof(*fep)); ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r)); + fep->pdev = pdev; if (!ndev->base_addr) { ret = -ENOMEM; @@ -1926,13 +1286,24 @@ fec_probe(struct platform_device *pdev) if (ret) goto failed_init; + ret = fec_enet_mii_init(pdev); + if (ret) + goto failed_mii_init; + ret = register_netdev(ndev); if (ret) goto failed_register; + printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " + "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name, + fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), + fep->phy_dev->irq); + return 0; failed_register: + fec_enet_mii_remove(fep); +failed_mii_init: failed_init: clk_disable(fep->clk); clk_put(fep->clk); @@ -1959,6 +1330,7 @@ fec_drv_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); fec_stop(ndev); + fec_enet_mii_remove(fep); clk_disable(fep->clk); clk_put(fep->clk); iounmap((void __iomem *)ndev->base_addr); |