diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 168 |
1 files changed, 149 insertions, 19 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 4498a3861aa3..ec363e19cd79 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -673,6 +673,19 @@ static void stmmac_release_ptp(struct stmmac_priv *priv) } /** + * stmmac_mac_flow_ctrl - Configure flow control in all queues + * @priv: driver private structure + * Description: It is used for configuring the flow control in all queues + */ +static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex) +{ + u32 tx_cnt = priv->plat->tx_queues_to_use; + + priv->hw->mac->flow_ctrl(priv->hw, duplex, priv->flow_ctrl, + priv->pause, tx_cnt); +} + +/** * stmmac_adjust_link - adjusts the link parameters * @dev: net device structure * Description: this is the helper called by the physical abstraction layer @@ -687,7 +700,6 @@ static void stmmac_adjust_link(struct net_device *dev) struct phy_device *phydev = dev->phydev; unsigned long flags; int new_state = 0; - unsigned int fc = priv->flow_ctrl, pause_time = priv->pause; if (!phydev) return; @@ -709,8 +721,7 @@ static void stmmac_adjust_link(struct net_device *dev) } /* Flow Control operation */ if (phydev->pause) - priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, - fc, pause_time); + stmmac_mac_flow_ctrl(priv, phydev->duplex); if (phydev->speed != priv->speed) { new_state = 1; @@ -1256,19 +1267,14 @@ static void free_dma_desc_resources(struct stmmac_priv *priv) */ static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv) { - int rx_count = priv->dma_cap.number_rx_queues; - int queue = 0; - - /* If GMAC does not have multiple queues, then this is not necessary*/ - if (rx_count == 1) - return; + u32 rx_queues_count = priv->plat->rx_queues_to_use; + int queue; + u8 mode; - /** - * If the core is synthesized with multiple rx queues / multiple - * dma channels, then rx queues will be disabled by default. - * For now only rx queue 0 is enabled. - */ - priv->hw->mac->rx_queue_enable(priv->hw, queue); + for (queue = 0; queue < rx_queues_count; queue++) { + mode = priv->plat->rx_queues_cfg[queue].mode_to_use; + priv->hw->mac->rx_queue_enable(priv->hw, mode, queue); + } } /** @@ -1281,6 +1287,9 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) { int rxfifosz = priv->plat->rx_fifo_size; + if (rxfifosz == 0) + rxfifosz = priv->dma_cap.rx_fifo_size; + if (priv->plat->force_thresh_dma_mode) priv->hw->dma->dma_mode(priv->ioaddr, tc, tc, rxfifosz); else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) { @@ -1446,6 +1455,9 @@ static void stmmac_dma_interrupt(struct stmmac_priv *priv) int status; int rxfifosz = priv->plat->rx_fifo_size; + if (rxfifosz == 0) + rxfifosz = priv->dma_cap.rx_fifo_size; + status = priv->hw->dma->dma_interrupt(priv->ioaddr, &priv->xstats); if (likely((status & handle_rx)) || (status & handle_tx)) { if (likely(napi_schedule_prep(&priv->napi))) { @@ -1645,6 +1657,101 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) } /** + * stmmac_set_tx_queue_weight - Set TX queue weight + * @priv: driver private structure + * Description: It is used for setting TX queues weight + */ +static void stmmac_set_tx_queue_weight(struct stmmac_priv *priv) +{ + u32 tx_queues_count = priv->plat->tx_queues_to_use; + u32 weight; + u32 queue; + + for (queue = 0; queue < tx_queues_count; queue++) { + weight = priv->plat->tx_queues_cfg[queue].weight; + priv->hw->mac->set_mtl_tx_queue_weight(priv->hw, weight, queue); + } +} + +/** + * stmmac_configure_cbs - Configure CBS in TX queue + * @priv: driver private structure + * Description: It is used for configuring CBS in AVB TX queues + */ +static void stmmac_configure_cbs(struct stmmac_priv *priv) +{ + u32 tx_queues_count = priv->plat->tx_queues_to_use; + u32 mode_to_use; + u32 queue; + + for (queue = 0; queue < tx_queues_count; queue++) { + mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use; + if (mode_to_use == MTL_QUEUE_DCB) + continue; + + priv->hw->mac->config_cbs(priv->hw, + priv->plat->tx_queues_cfg[queue].send_slope, + priv->plat->tx_queues_cfg[queue].idle_slope, + priv->plat->tx_queues_cfg[queue].high_credit, + priv->plat->tx_queues_cfg[queue].low_credit, + queue); + } +} + +/** + * stmmac_rx_queue_dma_chan_map - Map RX queue to RX dma channel + * @priv: driver private structure + * Description: It is used for mapping RX queues to RX dma channels + */ +static void stmmac_rx_queue_dma_chan_map(struct stmmac_priv *priv) +{ + u32 rx_queues_count = priv->plat->rx_queues_to_use; + u32 queue; + u32 chan; + + for (queue = 0; queue < rx_queues_count; queue++) { + chan = priv->plat->rx_queues_cfg[queue].chan; + priv->hw->mac->map_mtl_to_dma(priv->hw, queue, chan); + } +} + +/** + * stmmac_mtl_configuration - Configure MTL + * @priv: driver private structure + * Description: It is used for configurring MTL + */ +static void stmmac_mtl_configuration(struct stmmac_priv *priv) +{ + u32 rx_queues_count = priv->plat->rx_queues_to_use; + u32 tx_queues_count = priv->plat->tx_queues_to_use; + + if (tx_queues_count > 1 && priv->hw->mac->set_mtl_tx_queue_weight) + stmmac_set_tx_queue_weight(priv); + + /* Configure MTL RX algorithms */ + if (rx_queues_count > 1 && priv->hw->mac->prog_mtl_rx_algorithms) + priv->hw->mac->prog_mtl_rx_algorithms(priv->hw, + priv->plat->rx_sched_algorithm); + + /* Configure MTL TX algorithms */ + if (tx_queues_count > 1 && priv->hw->mac->prog_mtl_tx_algorithms) + priv->hw->mac->prog_mtl_tx_algorithms(priv->hw, + priv->plat->tx_sched_algorithm); + + /* Configure CBS in AVB TX queues */ + if (tx_queues_count > 1 && priv->hw->mac->config_cbs) + stmmac_configure_cbs(priv); + + /* Map RX MTL to DMA channels */ + if (rx_queues_count > 1 && priv->hw->mac->map_mtl_to_dma) + stmmac_rx_queue_dma_chan_map(priv); + + /* Enable MAC RX Queues */ + if (rx_queues_count > 1 && priv->hw->mac->rx_queue_enable) + stmmac_mac_enable_rx_queues(priv); +} + +/** * stmmac_hw_setup - setup mac in a usable state. * @dev : pointer to the device structure. * Description: @@ -1688,9 +1795,9 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->hw, dev->mtu); - /* Initialize MAC RX Queues */ - if (priv->hw->mac->rx_queue_enable) - stmmac_mac_enable_rx_queues(priv); + /* Initialize MTL*/ + if (priv->synopsys_id >= DWMAC_CORE_4_00) + stmmac_mtl_configuration(priv); ret = priv->hw->mac->rx_ipc(priv->hw); if (!ret) { @@ -1711,6 +1818,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) stmmac_mmc_setup(priv); if (init_ptp) { + ret = clk_prepare_enable(priv->plat->clk_ptp_ref); + if (ret < 0) + netdev_warn(priv->dev, "failed to enable PTP reference clock: %d\n", ret); + ret = stmmac_init_ptp(priv); if (ret == -EOPNOTSUPP) netdev_warn(priv->dev, "PTP not supported by HW\n"); @@ -1754,6 +1865,13 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) return 0; } +static void stmmac_hw_teardown(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + clk_disable_unprepare(priv->plat->clk_ptp_ref); +} + /** * stmmac_open - open entry point of the driver * @dev : pointer to the device structure. @@ -1821,7 +1939,7 @@ static int stmmac_open(struct net_device *dev) netdev_err(priv->dev, "%s: ERROR: allocating the IRQ %d (error: %d)\n", __func__, dev->irq, ret); - goto init_error; + goto irq_error; } /* Request the Wake IRQ in case of another line is used for WoL */ @@ -1858,7 +1976,12 @@ lpiirq_error: free_irq(priv->wol_irq, dev); wolirq_error: free_irq(dev->irq, dev); +irq_error: + if (dev->phydev) + phy_stop(dev->phydev); + del_timer_sync(&priv->txtimer); + stmmac_hw_teardown(dev); init_error: free_dma_desc_resources(priv); dma_desc_error: @@ -2063,6 +2186,8 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) des = skb_frag_dma_map(priv->device, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE); + if (dma_mapping_error(priv->device, des)) + goto dma_map_err; stmmac_tso_allocator(priv, des, skb_frag_size(frag), (i == nfrags - 1)); @@ -2808,6 +2933,11 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) { int status = priv->hw->mac->host_irq_status(priv->hw, &priv->xstats); + + if (priv->synopsys_id >= DWMAC_CORE_4_00) + status |= priv->hw->mac->host_mtl_irq_status(priv->hw, + STMMAC_CHAN0); + if (unlikely(status)) { /* For LPI we need to save the tx status */ if (status & CORE_IRQ_TX_PATH_IN_LPI_MODE) |