summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc/efx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/sfc/efx.c')
-rw-r--r--drivers/net/ethernet/sfc/efx.c267
1 files changed, 224 insertions, 43 deletions
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 0bc00991d310..01b99206139a 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -22,6 +22,7 @@
#include <linux/topology.h>
#include <linux/gfp.h>
#include <linux/cpu_rmap.h>
+#include <linux/aer.h>
#include "net_driver.h"
#include "efx.h"
#include "nic.h"
@@ -71,21 +72,21 @@ const char *const efx_loopback_mode_names[] = {
const unsigned int efx_reset_type_max = RESET_TYPE_MAX;
const char *const efx_reset_type_names[] = {
- [RESET_TYPE_INVISIBLE] = "INVISIBLE",
- [RESET_TYPE_ALL] = "ALL",
- [RESET_TYPE_WORLD] = "WORLD",
- [RESET_TYPE_DISABLE] = "DISABLE",
- [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG",
- [RESET_TYPE_INT_ERROR] = "INT_ERROR",
- [RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY",
- [RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH",
- [RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH",
- [RESET_TYPE_TX_SKIP] = "TX_SKIP",
- [RESET_TYPE_MC_FAILURE] = "MC_FAILURE",
+ [RESET_TYPE_INVISIBLE] = "INVISIBLE",
+ [RESET_TYPE_ALL] = "ALL",
+ [RESET_TYPE_RECOVER_OR_ALL] = "RECOVER_OR_ALL",
+ [RESET_TYPE_WORLD] = "WORLD",
+ [RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE",
+ [RESET_TYPE_DISABLE] = "DISABLE",
+ [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG",
+ [RESET_TYPE_INT_ERROR] = "INT_ERROR",
+ [RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY",
+ [RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH",
+ [RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH",
+ [RESET_TYPE_TX_SKIP] = "TX_SKIP",
+ [RESET_TYPE_MC_FAILURE] = "MC_FAILURE",
};
-#define EFX_MAX_MTU (9 * 1024)
-
/* Reset workqueue. If any NIC has a hardware failure then a reset will be
* queued onto this work queue. This is not a per-nic work queue, because
* efx_reset_work() acquires the rtnl lock, so resets are naturally serialised.
@@ -117,9 +118,12 @@ MODULE_PARM_DESC(separate_tx_channels,
static int napi_weight = 64;
/* This is the time (in jiffies) between invocations of the hardware
- * monitor. On Falcon-based NICs, this will:
+ * monitor.
+ * On Falcon-based NICs, this will:
* - Check the on-board hardware monitor;
* - Poll the link state and reconfigure the hardware as necessary.
+ * On Siena-based NICs for power systems with EEH support, this will give EEH a
+ * chance to start.
*/
static unsigned int efx_monitor_interval = 1 * HZ;
@@ -203,13 +207,14 @@ static void efx_stop_all(struct efx_nic *efx);
#define EFX_ASSERT_RESET_SERIALISED(efx) \
do { \
if ((efx->state == STATE_READY) || \
+ (efx->state == STATE_RECOVERY) || \
(efx->state == STATE_DISABLED)) \
ASSERT_RTNL(); \
} while (0)
static int efx_check_disabled(struct efx_nic *efx)
{
- if (efx->state == STATE_DISABLED) {
+ if (efx->state == STATE_DISABLED || efx->state == STATE_RECOVERY) {
netif_err(efx, drv, efx->net_dev,
"device is disabled due to earlier errors\n");
return -EIO;
@@ -242,15 +247,9 @@ static int efx_process_channel(struct efx_channel *channel, int budget)
struct efx_rx_queue *rx_queue =
efx_channel_get_rx_queue(channel);
- /* Deliver last RX packet. */
- if (channel->rx_pkt) {
- __efx_rx_packet(channel, channel->rx_pkt);
- channel->rx_pkt = NULL;
- }
- if (rx_queue->enabled) {
- efx_rx_strategy(channel);
+ efx_rx_flush_packet(channel);
+ if (rx_queue->enabled)
efx_fast_push_rx_descriptors(rx_queue);
- }
}
return spent;
@@ -625,20 +624,51 @@ fail:
*/
static void efx_start_datapath(struct efx_nic *efx)
{
+ bool old_rx_scatter = efx->rx_scatter;
struct efx_tx_queue *tx_queue;
struct efx_rx_queue *rx_queue;
struct efx_channel *channel;
+ size_t rx_buf_len;
/* Calculate the rx buffer allocation parameters required to
* support the current MTU, including padding for header
* alignment and overruns.
*/
- efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
- EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
- efx->type->rx_buffer_hash_size +
- efx->type->rx_buffer_padding);
- efx->rx_buffer_order = get_order(efx->rx_buffer_len +
- sizeof(struct efx_rx_page_state));
+ efx->rx_dma_len = (efx->type->rx_buffer_hash_size +
+ EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
+ efx->type->rx_buffer_padding);
+ rx_buf_len = (sizeof(struct efx_rx_page_state) +
+ EFX_PAGE_IP_ALIGN + efx->rx_dma_len);
+ if (rx_buf_len <= PAGE_SIZE) {
+ efx->rx_scatter = false;
+ efx->rx_buffer_order = 0;
+ } else if (efx->type->can_rx_scatter) {
+ BUILD_BUG_ON(sizeof(struct efx_rx_page_state) +
+ EFX_PAGE_IP_ALIGN + EFX_RX_USR_BUF_SIZE >
+ PAGE_SIZE / 2);
+ efx->rx_scatter = true;
+ efx->rx_dma_len = EFX_RX_USR_BUF_SIZE;
+ efx->rx_buffer_order = 0;
+ } else {
+ efx->rx_scatter = false;
+ efx->rx_buffer_order = get_order(rx_buf_len);
+ }
+
+ efx_rx_config_page_split(efx);
+ if (efx->rx_buffer_order)
+ netif_dbg(efx, drv, efx->net_dev,
+ "RX buf len=%u; page order=%u batch=%u\n",
+ efx->rx_dma_len, efx->rx_buffer_order,
+ efx->rx_pages_per_batch);
+ else
+ netif_dbg(efx, drv, efx->net_dev,
+ "RX buf len=%u step=%u bpp=%u; page batch=%u\n",
+ efx->rx_dma_len, efx->rx_page_buf_step,
+ efx->rx_bufs_per_page, efx->rx_pages_per_batch);
+
+ /* RX filters also have scatter-enabled flags */
+ if (efx->rx_scatter != old_rx_scatter)
+ efx_filter_update_rx_scatter(efx);
/* We must keep at least one descriptor in a TX ring empty.
* We could avoid this when the queue size does not exactly
@@ -655,16 +685,12 @@ static void efx_start_datapath(struct efx_nic *efx)
efx_for_each_channel_tx_queue(tx_queue, channel)
efx_init_tx_queue(tx_queue);
- /* The rx buffer allocation strategy is MTU dependent */
- efx_rx_strategy(channel);
-
efx_for_each_channel_rx_queue(rx_queue, channel) {
efx_init_rx_queue(rx_queue);
efx_nic_generate_fill_event(rx_queue);
}
- WARN_ON(channel->rx_pkt != NULL);
- efx_rx_strategy(channel);
+ WARN_ON(channel->rx_pkt_n_frags);
}
if (netif_device_present(efx->net_dev))
@@ -683,7 +709,7 @@ static void efx_stop_datapath(struct efx_nic *efx)
BUG_ON(efx->port_enabled);
/* Only perform flush if dma is enabled */
- if (dev->is_busmaster) {
+ if (dev->is_busmaster && efx->state != STATE_RECOVERY) {
rc = efx_nic_flush_queues(efx);
if (rc && EFX_WORKAROUND_7803(efx)) {
@@ -1596,13 +1622,15 @@ static void efx_start_all(struct efx_nic *efx)
efx_start_port(efx);
efx_start_datapath(efx);
- /* Start the hardware monitor if there is one. Otherwise (we're link
- * event driven), we have to poll the PHY because after an event queue
- * flush, we could have a missed a link state change */
- if (efx->type->monitor != NULL) {
+ /* Start the hardware monitor if there is one */
+ if (efx->type->monitor != NULL)
queue_delayed_work(efx->workqueue, &efx->monitor_work,
efx_monitor_interval);
- } else {
+
+ /* If link state detection is normally event-driven, we have
+ * to poll now because we could have missed a change
+ */
+ if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0) {
mutex_lock(&efx->mac_lock);
if (efx->phy_op->poll(efx))
efx_link_status_changed(efx);
@@ -2309,7 +2337,9 @@ int efx_reset(struct efx_nic *efx, enum reset_type method)
out:
/* Leave device stopped if necessary */
- disabled = rc || method == RESET_TYPE_DISABLE;
+ disabled = rc ||
+ method == RESET_TYPE_DISABLE ||
+ method == RESET_TYPE_RECOVER_OR_DISABLE;
rc2 = efx_reset_up(efx, method, !disabled);
if (rc2) {
disabled = true;
@@ -2328,13 +2358,48 @@ out:
return rc;
}
+/* Try recovery mechanisms.
+ * For now only EEH is supported.
+ * Returns 0 if the recovery mechanisms are unsuccessful.
+ * Returns a non-zero value otherwise.
+ */
+static int efx_try_recovery(struct efx_nic *efx)
+{
+#ifdef CONFIG_EEH
+ /* A PCI error can occur and not be seen by EEH because nothing
+ * happens on the PCI bus. In this case the driver may fail and
+ * schedule a 'recover or reset', leading to this recovery handler.
+ * Manually call the eeh failure check function.
+ */
+ struct eeh_dev *eehdev =
+ of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev));
+
+ if (eeh_dev_check_failure(eehdev)) {
+ /* The EEH mechanisms will handle the error and reset the
+ * device if necessary.
+ */
+ return 1;
+ }
+#endif
+ return 0;
+}
+
/* The worker thread exists so that code that cannot sleep can
* schedule a reset for later.
*/
static void efx_reset_work(struct work_struct *data)
{
struct efx_nic *efx = container_of(data, struct efx_nic, reset_work);
- unsigned long pending = ACCESS_ONCE(efx->reset_pending);
+ unsigned long pending;
+ enum reset_type method;
+
+ pending = ACCESS_ONCE(efx->reset_pending);
+ method = fls(pending) - 1;
+
+ if ((method == RESET_TYPE_RECOVER_OR_DISABLE ||
+ method == RESET_TYPE_RECOVER_OR_ALL) &&
+ efx_try_recovery(efx))
+ return;
if (!pending)
return;
@@ -2346,7 +2411,7 @@ static void efx_reset_work(struct work_struct *data)
* it cannot change again.
*/
if (efx->state == STATE_READY)
- (void)efx_reset(efx, fls(pending) - 1);
+ (void)efx_reset(efx, method);
rtnl_unlock();
}
@@ -2355,11 +2420,20 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
{
enum reset_type method;
+ if (efx->state == STATE_RECOVERY) {
+ netif_dbg(efx, drv, efx->net_dev,
+ "recovering: skip scheduling %s reset\n",
+ RESET_TYPE(type));
+ return;
+ }
+
switch (type) {
case RESET_TYPE_INVISIBLE:
case RESET_TYPE_ALL:
+ case RESET_TYPE_RECOVER_OR_ALL:
case RESET_TYPE_WORLD:
case RESET_TYPE_DISABLE:
+ case RESET_TYPE_RECOVER_OR_DISABLE:
method = type;
netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
RESET_TYPE(method));
@@ -2569,6 +2643,8 @@ static void efx_pci_remove(struct pci_dev *pci_dev)
efx_fini_struct(efx);
pci_set_drvdata(pci_dev, NULL);
free_netdev(efx->net_dev);
+
+ pci_disable_pcie_error_reporting(pci_dev);
};
/* NIC VPD information
@@ -2741,6 +2817,11 @@ static int efx_pci_probe(struct pci_dev *pci_dev,
netif_warn(efx, probe, efx->net_dev,
"failed to create MTDs (%d)\n", rc);
+ rc = pci_enable_pcie_error_reporting(pci_dev);
+ if (rc && rc != -EINVAL)
+ netif_warn(efx, probe, efx->net_dev,
+ "pci_enable_pcie_error_reporting failed (%d)\n", rc);
+
return 0;
fail4:
@@ -2865,12 +2946,112 @@ static const struct dev_pm_ops efx_pm_ops = {
.restore = efx_pm_resume,
};
+/* A PCI error affecting this device was detected.
+ * At this point MMIO and DMA may be disabled.
+ * Stop the software path and request a slot reset.
+ */
+static pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev,
+ enum pci_channel_state state)
+{
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ rtnl_lock();
+
+ if (efx->state != STATE_DISABLED) {
+ efx->state = STATE_RECOVERY;
+ efx->reset_pending = 0;
+
+ efx_device_detach_sync(efx);
+
+ efx_stop_all(efx);
+ efx_stop_interrupts(efx, false);
+
+ status = PCI_ERS_RESULT_NEED_RESET;
+ } else {
+ /* If the interface is disabled we don't want to do anything
+ * with it.
+ */
+ status = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ rtnl_unlock();
+
+ pci_disable_device(pdev);
+
+ return status;
+}
+
+/* Fake a successfull reset, which will be performed later in efx_io_resume. */
+static pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev)
+{
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+ int rc;
+
+ if (pci_enable_device(pdev)) {
+ netif_err(efx, hw, efx->net_dev,
+ "Cannot re-enable PCI device after reset.\n");
+ status = PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ rc = pci_cleanup_aer_uncorrect_error_status(pdev);
+ if (rc) {
+ netif_err(efx, hw, efx->net_dev,
+ "pci_cleanup_aer_uncorrect_error_status failed (%d)\n", rc);
+ /* Non-fatal error. Continue. */
+ }
+
+ return status;
+}
+
+/* Perform the actual reset and resume I/O operations. */
+static void efx_io_resume(struct pci_dev *pdev)
+{
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+ int rc;
+
+ rtnl_lock();
+
+ if (efx->state == STATE_DISABLED)
+ goto out;
+
+ rc = efx_reset(efx, RESET_TYPE_ALL);
+ if (rc) {
+ netif_err(efx, hw, efx->net_dev,
+ "efx_reset failed after PCI error (%d)\n", rc);
+ } else {
+ efx->state = STATE_READY;
+ netif_dbg(efx, hw, efx->net_dev,
+ "Done resetting and resuming IO after PCI error.\n");
+ }
+
+out:
+ rtnl_unlock();
+}
+
+/* For simplicity and reliability, we always require a slot reset and try to
+ * reset the hardware when a pci error affecting the device is detected.
+ * We leave both the link_reset and mmio_enabled callback unimplemented:
+ * with our request for slot reset the mmio_enabled callback will never be
+ * called, and the link_reset callback is not used by AER or EEH mechanisms.
+ */
+static struct pci_error_handlers efx_err_handlers = {
+ .error_detected = efx_io_error_detected,
+ .slot_reset = efx_io_slot_reset,
+ .resume = efx_io_resume,
+};
+
static struct pci_driver efx_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = efx_pci_table,
.probe = efx_pci_probe,
.remove = efx_pci_remove,
.driver.pm = &efx_pm_ops,
+ .err_handler = &efx_err_handlers,
};
/**************************************************************************