diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/mvneta.c')
| -rw-r--r-- | drivers/net/ethernet/marvell/mvneta.c | 46 |
1 files changed, 19 insertions, 27 deletions
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 577f7ca7deba..a6d26d351dfc 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -260,7 +260,6 @@ #define MVNETA_VLAN_TAG_LEN 4 -#define MVNETA_CPU_D_CACHE_LINE_SIZE 32 #define MVNETA_TX_CSUM_DEF_SIZE 1600 #define MVNETA_TX_CSUM_MAX_SIZE 9800 #define MVNETA_ACC_MODE_EXT1 1 @@ -300,7 +299,7 @@ #define MVNETA_RX_PKT_SIZE(mtu) \ ALIGN((mtu) + MVNETA_MH_SIZE + MVNETA_VLAN_TAG_LEN + \ ETH_HLEN + ETH_FCS_LEN, \ - MVNETA_CPU_D_CACHE_LINE_SIZE) + cache_line_size()) #define IS_TSO_HEADER(txq, addr) \ ((addr >= txq->tso_hdrs_phys) && \ @@ -2764,9 +2763,6 @@ static int mvneta_rxq_init(struct mvneta_port *pp, if (rxq->descs == NULL) return -ENOMEM; - BUG_ON(rxq->descs != - PTR_ALIGN(rxq->descs, MVNETA_CPU_D_CACHE_LINE_SIZE)); - rxq->last_desc = rxq->size - 1; /* Set Rx descriptors queue starting address */ @@ -2837,10 +2833,6 @@ static int mvneta_txq_init(struct mvneta_port *pp, if (txq->descs == NULL) return -ENOMEM; - /* Make sure descriptor address is cache line size aligned */ - BUG_ON(txq->descs != - PTR_ALIGN(txq->descs, MVNETA_CPU_D_CACHE_LINE_SIZE)); - txq->last_desc = txq->size - 1; /* Set maximum bandwidth for enabled TXQs */ @@ -3050,6 +3042,20 @@ static int mvneta_check_mtu_valid(struct net_device *dev, int mtu) return mtu; } +static void mvneta_percpu_enable(void *arg) +{ + struct mvneta_port *pp = arg; + + enable_percpu_irq(pp->dev->irq, IRQ_TYPE_NONE); +} + +static void mvneta_percpu_disable(void *arg) +{ + struct mvneta_port *pp = arg; + + disable_percpu_irq(pp->dev->irq); +} + /* Change the device mtu */ static int mvneta_change_mtu(struct net_device *dev, int mtu) { @@ -3074,6 +3080,7 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu) * reallocation of the queues */ mvneta_stop_dev(pp); + on_each_cpu(mvneta_percpu_disable, pp, true); mvneta_cleanup_txqs(pp); mvneta_cleanup_rxqs(pp); @@ -3097,6 +3104,7 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu) return ret; } + on_each_cpu(mvneta_percpu_enable, pp, true); mvneta_start_dev(pp); mvneta_port_up(pp); @@ -3250,20 +3258,6 @@ static void mvneta_mdio_remove(struct mvneta_port *pp) pp->phy_dev = NULL; } -static void mvneta_percpu_enable(void *arg) -{ - struct mvneta_port *pp = arg; - - enable_percpu_irq(pp->dev->irq, IRQ_TYPE_NONE); -} - -static void mvneta_percpu_disable(void *arg) -{ - struct mvneta_port *pp = arg; - - disable_percpu_irq(pp->dev->irq); -} - /* Electing a CPU must be done in an atomic way: it should be done * after or before the removal/insertion of a CPU and this function is * not reentrant. @@ -3360,8 +3354,7 @@ static int mvneta_percpu_notifier(struct notifier_block *nfb, /* Enable per-CPU interrupts on the CPU that is * brought up. */ - smp_call_function_single(cpu, mvneta_percpu_enable, - pp, true); + mvneta_percpu_enable(pp); /* Enable per-CPU interrupt on the one CPU we care * about. @@ -3393,8 +3386,7 @@ static int mvneta_percpu_notifier(struct notifier_block *nfb, /* Disable per-CPU interrupts on the CPU that is * brought down. */ - smp_call_function_single(cpu, mvneta_percpu_disable, - pp, true); + mvneta_percpu_disable(pp); break; case CPU_DEAD: |