diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 13 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 107 |
3 files changed, 93 insertions, 31 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index ae73ef14fdf3..252850d9a3e0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -800,6 +800,10 @@ int ixgbe_fcoe_enable(struct net_device *netdev) return -EINVAL; e_info(drv, "Enabling FCoE offload features.\n"); + + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + e_warn(probe, "Enabling FCoE on PF will disable legacy VFs\n"); + if (netif_running(netdev)) netdev->netdev_ops->ndo_stop(netdev); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index fa3d552e1f4a..e2a6691cbd7c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3263,6 +3263,11 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE; #endif /* IXGBE_FCOE */ + + /* adjust max frame to be at least the size of a standard frame */ + if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) + max_frame = (ETH_FRAME_LEN + ETH_FCS_LEN); + mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { mhadd &= ~IXGBE_MHADD_MFS_MASK; @@ -4828,14 +4833,14 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; /* - * For 82599EB we cannot allow PF to change MTU greater than 1500 - * in SR-IOV mode as it may cause buffer overruns in guest VFs that - * don't allocate and chain buffers correctly. + * For 82599EB we cannot allow legacy VFs to enable their receive + * paths when MTU greater than 1500 is configured. So display a + * warning that legacy VFs will be disabled. */ if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (adapter->hw.mac.type == ixgbe_mac_82599EB) && (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE)) - return -EINVAL; + e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n"); e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index dce48bf64d96..420766e28ec6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -150,16 +150,6 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE | IXGBE_FLAG2_RSC_ENABLED); -#ifdef IXGBE_FCOE - /* - * When SR-IOV is enabled 82599 cannot support jumbo frames - * so we must disable FCoE because we cannot support FCoE MTU. - */ - if (adapter->hw.mac.type == ixgbe_mac_82599EB) - adapter->flags &= ~(IXGBE_FLAG_FCOE_ENABLED | - IXGBE_FLAG_FCOE_CAPABLE); -#endif - /* enable spoof checking for all VFs */ for (i = 0; i < adapter->num_vfs; i++) adapter->vfinfo[i].spoofchk_enabled = true; @@ -353,31 +343,77 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add); } -static void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf) +static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) { struct ixgbe_hw *hw = &adapter->hw; - int new_mtu = msgbuf[1]; + int max_frame = msgbuf[1]; u32 max_frs; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - /* Only X540 supports jumbo frames in IOV mode */ - if (adapter->hw.mac.type != ixgbe_mac_X540) - return; + /* + * For 82599EB we have to keep all PFs and VFs operating with + * the same max_frame value in order to avoid sending an oversize + * frame to a VF. In order to guarantee this is handled correctly + * for all cases we have several special exceptions to take into + * account before we can enable the VF for receive + */ + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + struct net_device *dev = adapter->netdev; + int pf_max_frame = dev->mtu + ETH_HLEN; + u32 reg_offset, vf_shift, vfre; + s32 err = 0; + +#ifdef CONFIG_FCOE + if (dev->features & NETIF_F_FCOE_MTU) + pf_max_frame = max_t(int, pf_max_frame, + IXGBE_FCOE_JUMBO_FRAME_SIZE); + +#endif /* CONFIG_FCOE */ + /* + * If the PF or VF are running w/ jumbo frames enabled we + * need to shut down the VF Rx path as we cannot support + * jumbo frames on legacy VFs + */ + if ((pf_max_frame > ETH_FRAME_LEN) || + (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) + err = -EINVAL; + + /* determine VF receive enable location */ + vf_shift = vf % 32; + reg_offset = vf / 32; + + /* enable or disable receive depending on error */ + vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset)); + if (err) + vfre &= ~(1 << vf_shift); + else + vfre |= 1 << vf_shift; + IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre); + + if (err) { + e_err(drv, "VF max_frame %d out of range\n", max_frame); + return err; + } + } /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) { - e_err(drv, "VF mtu %d out of range\n", new_mtu); - return; + if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) { + e_err(drv, "VF max_frame %d out of range\n", max_frame); + return -EINVAL; } - max_frs = (IXGBE_READ_REG(hw, IXGBE_MAXFRS) & - IXGBE_MHADD_MFS_MASK) >> IXGBE_MHADD_MFS_SHIFT; - if (max_frs < new_mtu) { - max_frs = new_mtu << IXGBE_MHADD_MFS_SHIFT; + /* pull current max frame size from hardware */ + max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS); + max_frs &= IXGBE_MHADD_MFS_MASK; + max_frs >>= IXGBE_MHADD_MFS_SHIFT; + + if (max_frs < max_frame) { + max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT; IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs); } - e_info(hw, "VF requests change max MTU to %d\n", new_mtu); + e_info(hw, "VF requests change max MTU to %d\n", max_frame); + + return 0; } static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe) @@ -532,11 +568,28 @@ static inline void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf) /* enable transmit and receive for vf */ reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset)); - reg |= (reg | (1 << vf_shift)); + reg |= 1 << vf_shift; IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg); reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset)); - reg |= (reg | (1 << vf_shift)); + reg |= 1 << vf_shift; + /* + * The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs. + * For more info take a look at ixgbe_set_vf_lpe + */ + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + struct net_device *dev = adapter->netdev; + int pf_max_frame = dev->mtu + ETH_HLEN; + +#ifdef CONFIG_FCOE + if (dev->features & NETIF_F_FCOE_MTU) + pf_max_frame = max_t(int, pf_max_frame, + IXGBE_FCOE_JUMBO_FRAME_SIZE); + +#endif /* CONFIG_FCOE */ + if (pf_max_frame > ETH_FRAME_LEN) + reg &= ~(1 << vf_shift); + } IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg); /* Enable counting of spoofed packets in the SSVPC register */ @@ -633,7 +686,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) hash_list, vf); break; case IXGBE_VF_SET_LPE: - ixgbe_set_vf_lpe(adapter, msgbuf); + retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf); break; case IXGBE_VF_SET_VLAN: add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) |