12 files changed, 99 insertions, 39 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 8a32eb7d47b9..a0ebd9ecf243 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -431,6 +431,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 /**
  *  ixgbe_start_mac_link_82598 - Configures MAC link settings
  *  @hw: pointer to hardware structure
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
  *
  *  Configures link settings based on values in the ixgbe_hw struct.
  *  Restarts the link.  Performs autonegotiation if needed.
@@ -1054,7 +1055,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset at address 0xA2
- *  @eeprom_data: value read
+ *  @sff8472_data: value read
  *
  *  Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
  **/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index d602637ccc40..4dfc81dbee4b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -221,7 +221,7 @@ static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked,
 /**
  * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
  * @hw: pointer to hardware structure
- * @reg_val: value to write to AUTOC
+ * @autoc: value to write to AUTOC
  * @locked: bool to indicate whether the SW/FW lock was already taken by
  *	     previous proc_autoc_read_82599.
  *
@@ -1310,10 +1310,11 @@ do { \
 
 /**
  *  ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
- *  @stream: input bitstream to compute the hash on
+ *  @input: input bitstream to compute the hash on
+ *  @common: compressed common input dword
  *
  *  This function is almost identical to the function above but contains
- *  several optomizations such as unwinding all of the loops, letting the
+ *  several optimizations such as unwinding all of the loops, letting the
  *  compiler work out all of the conditional ifs since the keys are static
  *  defines, and computing two keys at once since the hashed dword stream
  *  will be the same for both keys.
@@ -1446,7 +1447,7 @@ do { \
 
 /**
  *  ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
- *  @atr_input: input bitstream to compute the hash on
+ *  @input: input bitstream to compute the hash on
  *  @input_mask: mask for the input bitstream
  *
  *  This function serves two main purposes.  First it applies the input_mask
@@ -2078,6 +2079,7 @@ reset_pipeline_out:
  *  ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: address to read from
  *  @data: value read
  *
  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
@@ -2131,6 +2133,7 @@ release_i2c_access:
  *  ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: address to write to
  *  @data: value to write
  *
  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 1948e4208fb4..7ac7ef9b37ff 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -1613,6 +1613,7 @@ static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
 /**
  *  ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
  *  @hw: pointer to hardware structure
+ *  @count: number of bits to shift
  **/
 static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
 {
@@ -1667,7 +1668,7 @@ static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
 /**
  *  ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
  *  @hw: pointer to hardware structure
- *  @eecd: EECD's current value
+ *  @eec: EEC's current value
  **/
 static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
 {
@@ -2037,7 +2038,7 @@ static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
 /**
  *  ixgbe_set_mta - Set bit-vector in multicast table
  *  @hw: pointer to hardware structure
- *  @hash_value: Multicast address hash value
+ *  @mc_addr: Multicast address
  *
  *  Sets the bit-vector in the multicast table.
  **/
@@ -3086,6 +3087,8 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
  *  ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
  *  @hw: pointer to hardware structure
  *  @vlan: VLAN id to write to VLAN filter
+ *  @vlvf_bypass: true to find vlanid only, false returns first empty slot if
+ *		  vlanid not found
  *
  *  return the VLVF index where this VLAN id should be placed
  *
@@ -3476,7 +3479,7 @@ void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
  *  ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
  *  @hw: pointer to hardware structure
  *  @enable: enable or disable switch for VLAN anti-spoofing
- *  @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
+ *  @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
  *
  **/
 void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
index 072ef3b5fc61..aaea8282bfd2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
@@ -39,6 +39,10 @@
  * are the smallest unit programmable into the underlying
  * hardware. The IEEE 802.1Qaz specification do not use bandwidth
  * groups so this is much simplified from the CEE case.
+ * @bw: bandwidth index by traffic class
+ * @refill: refill credits index by traffic class
+ * @max: max credits by traffic class
+ * @max_frame: maximum frame size
  */
 static s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill,
 			      __u16 *max, int max_frame)
@@ -72,8 +76,10 @@ static s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill,
 
 /**
  * ixgbe_dcb_calculate_tc_credits - Calculates traffic class credits
- * @ixgbe_dcb_config: Struct containing DCB settings.
- * @direction: Configuring either Tx or Rx.
+ * @hw: pointer to hardware structure
+ * @dcb_config: Struct containing DCB settings
+ * @max_frame: Maximum frame size
+ * @direction: Configuring either Tx or Rx
  *
  * This function calculates the credits allocated to each traffic class.
  * It should be called only after the rules are checked by
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
index b79e93a5b699..f94c7e82a30b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
@@ -34,7 +34,9 @@
 /**
  * ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @prio_type: priority type indexed by traffic class
  *
  * Configure Rx Data Arbiter and credits for each traffic class.
  */
@@ -91,7 +93,10 @@ s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
 /**
  * ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
  *
  * Configure Tx Descriptor Arbiter and credits for each traffic class.
  */
@@ -137,7 +142,10 @@ s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
 /**
  * ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
  *
  * Configure Tx Data Arbiter and credits for each traffic class.
  */
@@ -184,7 +192,7 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
 /**
  * ixgbe_dcb_config_pfc_82598 - Config priority flow control
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @pfc_en: enabled pfc bitmask
  *
  * Configure Priority Flow Control for each traffic class.
  */
@@ -269,7 +277,11 @@ static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
 /**
  * ixgbe_dcb_hw_config_82598 - Config and enable DCB
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @pfc_en: enabled pfc bitmask
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
  *
  * Configure dcb settings and enable dcb mode.
  */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
index 1011d644978f..1eed6811e914 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
@@ -38,6 +38,7 @@
  * @max: max credits index by traffic class
  * @bwg_id: bandwidth grouping indexed by traffic class
  * @prio_type: priority type indexed by traffic class
+ * @prio_tc: priority to tc assignments indexed by priority
  *
  * Configure Rx Packet Arbiter and credits for each traffic class.
  */
@@ -148,6 +149,7 @@ s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
  * @max: max credits index by traffic class
  * @bwg_id: bandwidth grouping indexed by traffic class
  * @prio_type: priority type indexed by traffic class
+ * @prio_tc: priority to tc assignments indexed by priority
  *
  * Configure Tx Packet Arbiter and credits for each traffic class.
  */
@@ -344,11 +346,12 @@ static s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw)
 /**
  * ixgbe_dcb_hw_config_82599 - Configure and enable DCB
  * @hw: pointer to hardware structure
+ * @pfc_en: enabled pfc bitmask
  * @refill: refill credits index by traffic class
  * @max: max credits index by traffic class
  * @bwg_id: bandwidth grouping indexed by traffic class
  * @prio_type: priority type indexed by traffic class
- * @pfc_en: enabled pfc bitmask
+ * @prio_tc: priority to tc assignments indexed by priority
  *
  * Configure dcb settings and enable dcb mode.
  */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
index 5e2c1e35e517..ad54080488ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
@@ -249,7 +249,7 @@ void ixgbe_dbg_adapter_init(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_dbg_adapter_exit - clear out the adapter's debugfs entries
- * @pf: the pf that is stopping
+ * @adapter: the adapter that is exiting
  **/
 void ixgbe_dbg_adapter_exit(struct ixgbe_adapter *adapter)
 {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 6e6b3c175267..7a09a40e4472 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -150,6 +150,7 @@ skip_ddpinv:
  * @xid: the exchange id requesting ddp
  * @sgl: the scatter-gather list for this request
  * @sgc: the number of scatter-gather items
+ * @target_mode: 1 to setup target mode, 0 to setup initiator mode
  *
  * Returns : 1 for success and 0 for no ddp
  */
@@ -1063,7 +1064,7 @@ int ixgbe_fcoe_get_hbainfo(struct net_device *netdev,
 
 /**
  * ixgbe_fcoe_get_tc - get the current TC that fcoe is mapped to
- * @adapter - pointer to the device adapter structure
+ * @adapter: pointer to the device adapter structure
  *
  * Return : TC that FCoE is mapped to
  */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index d8c4c1b90378..4f28621b76e1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1128,6 +1128,9 @@ static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_tx_maxrate - callback to set the maximum per-queue bitrate
+ * @netdev: network interface device structure
+ * @queue_index: Tx queue to set
+ * @maxrate: desired maximum transmit bitrate
  **/
 static int ixgbe_tx_maxrate(struct net_device *netdev,
 			    int queue_index, u32 maxrate)
@@ -2025,8 +2028,8 @@ static bool ixgbe_can_reuse_rx_page(struct ixgbe_rx_buffer *rx_buffer)
  * ixgbe_add_rx_frag - Add contents of Rx buffer to sk_buff
  * @rx_ring: rx descriptor ring to transact packets on
  * @rx_buffer: buffer containing page to add
- * @rx_desc: descriptor containing length of buffer written by hardware
  * @skb: sk_buff to place the data into
+ * @size: size of data in rx_buffer
  *
  * This function will add the data contained in rx_buffer->page to the skb.
  * This is done either through a direct copy if the data in the buffer is
@@ -3017,6 +3020,8 @@ static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
 /**
  * ixgbe_irq_enable - Enable default interrupt generation settings
  * @adapter: board private structure
+ * @queues: enable irqs for queues
+ * @flush: flush register write
  **/
 static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
 				    bool flush)
@@ -3472,6 +3477,7 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
+ * @adapter: board private structure
  *
  **/
 static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
@@ -4000,8 +4006,8 @@ static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_configure_rscctl - enable RSC for the indicated ring
- * @adapter:    address of board private structure
- * @index:      index of ring to set
+ * @adapter: address of board private structure
+ * @ring: structure containing ring specific data
  **/
 static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
 				   struct ixgbe_ring *ring)
@@ -4857,9 +4863,11 @@ int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter,
 
 	return -ENOMEM;
 }
+
 /**
  * ixgbe_write_uc_addr_list - write unicast addresses to RAR table
  * @netdev: network interface device structure
+ * @vfn: pool to associate with unicast addresses
  *
  * Writes unicast address list to the RAR table.
  * Returns: -ENOMEM on failure/insufficient address space
@@ -6037,6 +6045,7 @@ static void ixgbe_init_dcb(struct ixgbe_adapter *adapter)
 /**
  * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
  * @adapter: board private structure to initialize
+ * @ii: pointer to ixgbe_info for device
  *
  * ixgbe_sw_init initializes the Adapter private data structure.
  * Fields are initialized based on PCI device information and
@@ -6321,6 +6330,7 @@ err_setup_tx:
 
 /**
  * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: pointer to ixgbe_adapter
  * @rx_ring:    rx descriptor ring (for a specific queue) to setup
  *
  * Returns 0 on success, negative on failure
@@ -7133,7 +7143,6 @@ static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
 /**
  * ixgbe_watchdog_update_link - update the link status
  * @adapter: pointer to the device adapter structure
- * @link_speed: pointer to a u32 to store the link_speed
  **/
 static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
 {
@@ -7586,7 +7595,7 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_service_timer - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
+ * @t: pointer to timer_list structure
  **/
 static void ixgbe_service_timer(struct timer_list *t)
 {
@@ -8574,7 +8583,7 @@ static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
 /**
  * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
  * netdev->dev_addrs
- * @netdev: network interface device structure
+ * @dev: network interface device structure
  *
  * Returns non-zero on failure
  **/
@@ -8598,7 +8607,7 @@ static int ixgbe_add_sanmac_netdev(struct net_device *dev)
 /**
  * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
  * netdev->dev_addrs
- * @netdev: network interface device structure
+ * @dev: network interface device structure
  *
  * Returns non-zero on failure
  **/
@@ -8765,7 +8774,7 @@ static void ixgbe_set_prio_tc_map(struct ixgbe_adapter *adapter)
 /**
  * ixgbe_setup_tc - configure net_device for multiple traffic classes
  *
- * @netdev: net device to configure
+ * @dev: net device to configure
  * @tc: number of traffic classes to enable
  */
 int ixgbe_setup_tc(struct net_device *dev, u8 tc)
@@ -9602,8 +9611,8 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 
 /**
  * ixgbe_configure_bridge_mode - set various bridge modes
- * @adapter - the private structure
- * @mode - requested bridge mode
+ * @adapter: the private structure
+ * @mode: requested bridge mode
  *
  * Configure some settings require for various bridge modes.
  **/
@@ -10071,7 +10080,7 @@ static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter)
  * ixgbe_wol_supported - Check whether device supports WoL
  * @adapter: the adapter private structure
  * @device_id: the device ID
- * @subdev_id: the subsystem device ID
+ * @subdevice_id: the subsystem device ID
  *
  * This function is used by probe and ethtool to determine
  * which devices have WoL support
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 654a402f0e9e..91bde90f9265 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -378,7 +378,7 @@ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
 
 /**
  *  ixgbe_get_phy_type_from_id - Get the phy type
- *  @hw: pointer to hardware structure
+ *  @phy_id: hardware phy id
  *
  **/
 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
@@ -489,6 +489,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
  *  the SWFW lock
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: 5 bit device type
  *  @phy_data: Pointer to read data from PHY register
  **/
 s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
@@ -564,6 +565,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
  *  using the SWFW lock - this function is needed in most cases
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: 5 bit device type
  *  @phy_data: Pointer to read data from PHY register
  **/
 s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
@@ -763,6 +765,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
  *  ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
+ *  @autoneg_wait_to_complete: unused
  **/
 s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 				       ixgbe_link_speed speed,
@@ -861,6 +864,8 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
 /**
  *  ixgbe_check_phy_link_tnx - Determine link and speed status
  *  @hw: pointer to hardware structure
+ *  @speed: link speed
+ *  @link_up: status of link
  *
  *  Reads the VS1 register to determine if link is up and the current speed for
  *  the PHY.
@@ -1667,7 +1672,7 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset at address 0xA2
- *  @eeprom_data: value read
+ *  @sff8472_data: value read
  *
  *  Performs byte read operation to SFP module's SFF-8472 data over I2C
  **/
@@ -1714,6 +1719,7 @@ static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
  *  ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: device address
  *  @data: value read
  *  @lock: true if to take and release semaphore
  *
@@ -1804,6 +1810,7 @@ fail:
  *  ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: device address
  *  @data: value read
  *
  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
@@ -1820,6 +1827,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: device address
  *  @data: value read
  *
  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
@@ -1836,6 +1844,7 @@ s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
  *  @data: value to write
  *  @lock: true if to take and release semaphore
  *
@@ -1904,6 +1913,7 @@ fail:
  *  ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
  *  @data: value to write
  *
  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
@@ -1920,6 +1930,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
  *  @data: value to write
  *
  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index ae312c45696a..f6cc9166082a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -166,7 +166,7 @@
 
 /**
  * ixgbe_ptp_setup_sdp_x540
- * @hw: the hardware private structure
+ * @adapter: private adapter structure
  *
  * this function enables or disables the clock out feature on SDP0 for
  * the X540 device. It will create a 1second periodic output that can
@@ -299,7 +299,7 @@ static u64 ixgbe_ptp_read_82599(const struct cyclecounter *cc)
  * ixgbe_ptp_convert_to_hwtstamp - convert register value to hw timestamp
  * @adapter: private adapter structure
  * @hwtstamp: stack timestamp structure
- * @systim: unsigned 64bit system time value
+ * @timestamp: unsigned 64bit system time value
  *
  * We need to convert the adapter's RX/TXSTMP registers into a hwtstamp value
  * which can be used by the stack's ptp functions.
@@ -1015,7 +1015,7 @@ static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter,
 /**
  * ixgbe_ptp_set_ts_config - user entry point for timestamp mode
  * @adapter: pointer to adapter struct
- * @ifreq: ioctl data
+ * @ifr: ioctl data
  *
  * Set hardware to requested mode. If unsupported, return an error with no
  * changes. Otherwise, store the mode for future reference.
@@ -1338,7 +1338,7 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_ptp_suspend - stop PTP work items
- * @ adapter: pointer to adapter struct
+ * @adapter: pointer to adapter struct
  *
  * this function suspends PTP activity, and prevents more PTP work from being
  * generated, but does not destroy the PTP clock device.
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index cb7da5f9c4da..3bce26e77090 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1642,10 +1642,12 @@ static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
 }
 
 /**
- *  ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP.
- *  @hw: pointer to hardware structure
+ * ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP.
+ * @hw: pointer to hardware structure
+ * @speed: the link speed to force
+ * @autoneg_wait_to_complete: unused
  *
- *  Configures the extern PHY and the integrated KR PHY for SFP support.
+ * Configures the extern PHY and the integrated KR PHY for SFP support.
  */
 static s32
 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
@@ -1737,6 +1739,8 @@ static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
 /**
  * ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP
  * @hw: pointer to hardware structure
+ * @speed: link speed
+ * @autoneg_wait_to_complete: unused
  *
  * Configure the the integrated PHY for native SFP support.
  */
@@ -1784,6 +1788,8 @@ ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 /**
  * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
  * @hw: pointer to hardware structure
+ * @speed: link speed
+ * @autoneg_wait_to_complete: unused
  *
  * Configure the the integrated PHY for SFP support.
  */
@@ -1859,7 +1865,7 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
  * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
  * @hw: pointer to hardware structure
  * @speed: new link speed
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * @autoneg_wait: true when waiting for completion is needed
  *
  * Setup internal/external PHY link speed based on link speed, then set
  * external PHY auto advertised link speed.
@@ -1943,6 +1949,8 @@ static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
 /**
  * ixgbe_setup_sgmii - Set up link for sgmii
  * @hw: pointer to hardware structure
+ * @speed: unused
+ * @autoneg_wait_to_complete: unused
  */
 static s32
 ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
@@ -2014,6 +2022,8 @@ ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
 /**
  * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs
  * @hw: pointer to hardware structure
+ * @speed: the link speed to force
+ * @autoneg_wait: true when waiting for completion is needed
  */
 static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 				bool autoneg_wait)
@@ -3735,6 +3745,7 @@ static void ixgbe_release_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask)
  * ixgbe_read_phy_reg_x550a - Reads specified PHY register
  * @hw: pointer to hardware structure
  * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: 5 bit device type
  * @phy_data: Pointer to read data from PHY register
  *
  * Reads a value from a specified PHY register using the SWFW lock and PHY