diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/82571.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/82571.c | 2112 |
1 files changed, 2112 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c new file mode 100644 index 000000000000..a3e65fd26e09 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -0,0 +1,2112 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* + * 82571EB Gigabit Ethernet Controller + * 82571EB Gigabit Ethernet Controller (Copper) + * 82571EB Gigabit Ethernet Controller (Fiber) + * 82571EB Dual Port Gigabit Mezzanine Adapter + * 82571EB Quad Port Gigabit Mezzanine Adapter + * 82571PT Gigabit PT Quad Port Server ExpressModule + * 82572EI Gigabit Ethernet Controller (Copper) + * 82572EI Gigabit Ethernet Controller (Fiber) + * 82572EI Gigabit Ethernet Controller + * 82573V Gigabit Ethernet Controller (Copper) + * 82573E Gigabit Ethernet Controller (Copper) + * 82573L Gigabit Ethernet Controller + * 82574L Gigabit Network Connection + * 82583V Gigabit Network Connection + */ + +#include "e1000.h" + +#define ID_LED_RESERVED_F746 0xF746 +#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_OFF1_ON2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) + +#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 +#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */ +#define E1000_BASE1000T_STATUS 10 +#define E1000_IDLE_ERROR_COUNT_MASK 0xFF +#define E1000_RECEIVE_ERROR_COUNTER 21 +#define E1000_RECEIVE_ERROR_MAX 0xFFFF + +#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ + +static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); +static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); +static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); +static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw); +static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); +static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); +static s32 e1000_setup_link_82571(struct e1000_hw *hw); +static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); +static void e1000_clear_vfta_82571(struct e1000_hw *hw); +static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); +static s32 e1000_led_on_82574(struct e1000_hw *hw); +static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); +static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw); +static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw); +static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw); +static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw); +static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active); +static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active); + +/** + * e1000_init_phy_params_82571 - Init PHY func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + + if (hw->phy.media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + return 0; + } + + phy->addr = 1; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_82571; + + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + phy->type = e1000_phy_igp_2; + break; + case e1000_82573: + phy->type = e1000_phy_m88; + break; + case e1000_82574: + case e1000_82583: + phy->type = e1000_phy_bm; + phy->ops.acquire = e1000_get_hw_semaphore_82574; + phy->ops.release = e1000_put_hw_semaphore_82574; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574; + break; + default: + return -E1000_ERR_PHY; + break; + } + + /* This can only be done after all function pointers are setup. */ + ret_val = e1000_get_phy_id_82571(hw); + if (ret_val) { + e_dbg("Error getting PHY ID\n"); + return ret_val; + } + + /* Verify phy id */ + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + if (phy->id != IGP01E1000_I_PHY_ID) + ret_val = -E1000_ERR_PHY; + break; + case e1000_82573: + if (phy->id != M88E1111_I_PHY_ID) + ret_val = -E1000_ERR_PHY; + break; + case e1000_82574: + case e1000_82583: + if (phy->id != BME1000_E_PHY_ID_R2) + ret_val = -E1000_ERR_PHY; + break; + default: + ret_val = -E1000_ERR_PHY; + break; + } + + if (ret_val) + e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id); + + return ret_val; +} + +/** + * e1000_init_nvm_params_82571 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = er32(EECD); + u16 size; + + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8; + break; + } + + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + if (((eecd >> 15) & 0x3) == 0x3) { + nvm->type = e1000_nvm_flash_hw; + nvm->word_size = 2048; + /* + * Autonomous Flash update bit must be cleared due + * to Flash update issue. + */ + eecd &= ~E1000_EECD_AUPDEN; + ew32(EECD, eecd); + break; + } + /* Fall Through */ + default: + nvm->type = e1000_nvm_eeprom_spi; + size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); + /* + * Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + + /* EEPROM access above 16k is unsupported */ + if (size > 14) + size = 14; + nvm->word_size = 1 << size; + break; + } + + /* Function Pointers */ + switch (hw->mac.type) { + case e1000_82574: + case e1000_82583: + nvm->ops.acquire = e1000_get_hw_semaphore_82574; + nvm->ops.release = e1000_put_hw_semaphore_82574; + break; + default: + break; + } + + return 0; +} + +/** + * e1000_init_mac_params_82571 - Init MAC func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_mac_info *mac = &hw->mac; + struct e1000_mac_operations *func = &mac->ops; + u32 swsm = 0; + u32 swsm2 = 0; + bool force_clear_smbi = false; + + /* Set media type */ + switch (adapter->pdev->device) { + case E1000_DEV_ID_82571EB_FIBER: + case E1000_DEV_ID_82572EI_FIBER: + case E1000_DEV_ID_82571EB_QUAD_FIBER: + hw->phy.media_type = e1000_media_type_fiber; + break; + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82572EI_SERDES: + case E1000_DEV_ID_82571EB_SERDES_DUAL: + case E1000_DEV_ID_82571EB_SERDES_QUAD: + hw->phy.media_type = e1000_media_type_internal_serdes; + break; + default: + hw->phy.media_type = e1000_media_type_copper; + break; + } + + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set rar entry count */ + mac->rar_entry_count = E1000_RAR_ENTRIES; + /* Adaptive IFS supported */ + mac->adaptive_ifs = true; + + /* check for link */ + switch (hw->phy.media_type) { + case e1000_media_type_copper: + func->setup_physical_interface = e1000_setup_copper_link_82571; + func->check_for_link = e1000e_check_for_copper_link; + func->get_link_up_info = e1000e_get_speed_and_duplex_copper; + break; + case e1000_media_type_fiber: + func->setup_physical_interface = + e1000_setup_fiber_serdes_link_82571; + func->check_for_link = e1000e_check_for_fiber_link; + func->get_link_up_info = + e1000e_get_speed_and_duplex_fiber_serdes; + break; + case e1000_media_type_internal_serdes: + func->setup_physical_interface = + e1000_setup_fiber_serdes_link_82571; + func->check_for_link = e1000_check_for_serdes_link_82571; + func->get_link_up_info = + e1000e_get_speed_and_duplex_fiber_serdes; + break; + default: + return -E1000_ERR_CONFIG; + break; + } + + switch (hw->mac.type) { + case e1000_82573: + func->set_lan_id = e1000_set_lan_id_single_port; + func->check_mng_mode = e1000e_check_mng_mode_generic; + func->led_on = e1000e_led_on_generic; + func->blink_led = e1000e_blink_led_generic; + + /* FWSM register */ + mac->has_fwsm = true; + /* + * ARC supported; valid only if manageability features are + * enabled. + */ + mac->arc_subsystem_valid = + (er32(FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; + break; + case e1000_82574: + case e1000_82583: + func->set_lan_id = e1000_set_lan_id_single_port; + func->check_mng_mode = e1000_check_mng_mode_82574; + func->led_on = e1000_led_on_82574; + break; + default: + func->check_mng_mode = e1000e_check_mng_mode_generic; + func->led_on = e1000e_led_on_generic; + func->blink_led = e1000e_blink_led_generic; + + /* FWSM register */ + mac->has_fwsm = true; + break; + } + + /* + * Ensure that the inter-port SWSM.SMBI lock bit is clear before + * first NVM or PHY access. This should be done for single-port + * devices, and for one port only on dual-port devices so that + * for those devices we can still use the SMBI lock to synchronize + * inter-port accesses to the PHY & NVM. + */ + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + swsm2 = er32(SWSM2); + + if (!(swsm2 & E1000_SWSM2_LOCK)) { + /* Only do this for the first interface on this card */ + ew32(SWSM2, + swsm2 | E1000_SWSM2_LOCK); + force_clear_smbi = true; + } else + force_clear_smbi = false; + break; + default: + force_clear_smbi = true; + break; + } + + if (force_clear_smbi) { + /* Make sure SWSM.SMBI is clear */ + swsm = er32(SWSM); + if (swsm & E1000_SWSM_SMBI) { + /* This bit should not be set on a first interface, and + * indicates that the bootagent or EFI code has + * improperly left this bit enabled + */ + e_dbg("Please update your 82571 Bootagent\n"); + } + ew32(SWSM, swsm & ~E1000_SWSM_SMBI); + } + + /* + * Initialize device specific counter of SMBI acquisition + * timeouts. + */ + hw->dev_spec.e82571.smb_counter = 0; + + return 0; +} + +static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + static int global_quad_port_a; /* global port a indication */ + struct pci_dev *pdev = adapter->pdev; + int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1; + s32 rc; + + rc = e1000_init_mac_params_82571(adapter); + if (rc) + return rc; + + rc = e1000_init_nvm_params_82571(hw); + if (rc) + return rc; + + rc = e1000_init_phy_params_82571(hw); + if (rc) + return rc; + + /* tag quad port adapters first, it's used below */ + switch (pdev->device) { + case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_FIBER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LP: + case E1000_DEV_ID_82571PT_QUAD_COPPER: + adapter->flags |= FLAG_IS_QUAD_PORT; + /* mark the first port */ + if (global_quad_port_a == 0) + adapter->flags |= FLAG_IS_QUAD_PORT_A; + /* Reset for multiple quad port adapters */ + global_quad_port_a++; + if (global_quad_port_a == 4) + global_quad_port_a = 0; + break; + default: + break; + } + + switch (adapter->hw.mac.type) { + case e1000_82571: + /* these dual ports don't have WoL on port B at all */ + if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) || + (pdev->device == E1000_DEV_ID_82571EB_SERDES) || + (pdev->device == E1000_DEV_ID_82571EB_COPPER)) && + (is_port_b)) + adapter->flags &= ~FLAG_HAS_WOL; + /* quad ports only support WoL on port A */ + if (adapter->flags & FLAG_IS_QUAD_PORT && + (!(adapter->flags & FLAG_IS_QUAD_PORT_A))) + adapter->flags &= ~FLAG_HAS_WOL; + /* Does not support WoL on any port */ + if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) + adapter->flags &= ~FLAG_HAS_WOL; + break; + case e1000_82573: + if (pdev->device == E1000_DEV_ID_82573L) { + adapter->flags |= FLAG_HAS_JUMBO_FRAMES; + adapter->max_hw_frame_size = DEFAULT_JUMBO; + } + break; + default: + break; + } + + return 0; +} + +/** + * e1000_get_phy_id_82571 - Retrieve the PHY ID and revision + * @hw: pointer to the HW structure + * + * Reads the PHY registers and stores the PHY ID and possibly the PHY + * revision in the hardware structure. + **/ +static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_id = 0; + + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + /* + * The 82571 firmware may still be configuring the PHY. + * In this case, we cannot access the PHY until the + * configuration is done. So we explicitly set the + * PHY ID. + */ + phy->id = IGP01E1000_I_PHY_ID; + break; + case e1000_82573: + return e1000e_get_phy_id(hw); + break; + case e1000_82574: + case e1000_82583: + ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + if (ret_val) + return ret_val; + + phy->id = (u32)(phy_id << 16); + udelay(20); + ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + if (ret_val) + return ret_val; + + phy->id |= (u32)(phy_id); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + break; + default: + return -E1000_ERR_PHY; + break; + } + + return 0; +} + +/** + * e1000_get_hw_semaphore_82571 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) +{ + u32 swsm; + s32 sw_timeout = hw->nvm.word_size + 1; + s32 fw_timeout = hw->nvm.word_size + 1; + s32 i = 0; + + /* + * If we have timedout 3 times on trying to acquire + * the inter-port SMBI semaphore, there is old code + * operating on the other port, and it is not + * releasing SMBI. Modify the number of times that + * we try for the semaphore to interwork with this + * older code. + */ + if (hw->dev_spec.e82571.smb_counter > 2) + sw_timeout = 1; + + /* Get the SW semaphore */ + while (i < sw_timeout) { + swsm = er32(SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + udelay(50); + i++; + } + + if (i == sw_timeout) { + e_dbg("Driver can't access device - SMBI bit is set.\n"); + hw->dev_spec.e82571.smb_counter++; + } + /* Get the FW semaphore. */ + for (i = 0; i < fw_timeout; i++) { + swsm = er32(SWSM); + ew32(SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (er32(SWSM) & E1000_SWSM_SWESMBI) + break; + + udelay(50); + } + + if (i == fw_timeout) { + /* Release semaphores */ + e1000_put_hw_semaphore_82571(hw); + e_dbg("Driver can't access the NVM\n"); + return -E1000_ERR_NVM; + } + + return 0; +} + +/** + * e1000_put_hw_semaphore_82571 - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used to access the PHY or NVM + **/ +static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw) +{ + u32 swsm; + + swsm = er32(SWSM); + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + ew32(SWSM, swsm); +} +/** + * e1000_get_hw_semaphore_82573 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore during reset. + * + **/ +static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw) +{ + u32 extcnf_ctrl; + s32 ret_val = 0; + s32 i = 0; + + extcnf_ctrl = er32(EXTCNF_CTRL); + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + do { + ew32(EXTCNF_CTRL, extcnf_ctrl); + extcnf_ctrl = er32(EXTCNF_CTRL); + + if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) + break; + + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + usleep_range(2000, 4000); + i++; + } while (i < MDIO_OWNERSHIP_TIMEOUT); + + if (i == MDIO_OWNERSHIP_TIMEOUT) { + /* Release semaphores */ + e1000_put_hw_semaphore_82573(hw); + e_dbg("Driver can't access the PHY\n"); + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_put_hw_semaphore_82573 - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used during reset. + * + **/ +static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw) +{ + u32 extcnf_ctrl; + + extcnf_ctrl = er32(EXTCNF_CTRL); + extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + ew32(EXTCNF_CTRL, extcnf_ctrl); +} + +static DEFINE_MUTEX(swflag_mutex); + +/** + * e1000_get_hw_semaphore_82574 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM. + * + **/ +static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw) +{ + s32 ret_val; + + mutex_lock(&swflag_mutex); + ret_val = e1000_get_hw_semaphore_82573(hw); + if (ret_val) + mutex_unlock(&swflag_mutex); + return ret_val; +} + +/** + * e1000_put_hw_semaphore_82574 - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used to access the PHY or NVM + * + **/ +static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw) +{ + e1000_put_hw_semaphore_82573(hw); + mutex_unlock(&swflag_mutex); +} + +/** + * e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU D0 state according to the active flag. + * LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active) +{ + u16 data = er32(POEMB); + + if (active) + data |= E1000_PHY_CTRL_D0A_LPLU; + else + data &= ~E1000_PHY_CTRL_D0A_LPLU; + + ew32(POEMB, data); + return 0; +} + +/** + * e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * The low power link up (lplu) state is set to the power management level D3 + * when active is true, else clear lplu for D3. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active) +{ + u16 data = er32(POEMB); + + if (!active) { + data &= ~E1000_PHY_CTRL_NOND0A_LPLU; + } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) || + (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= E1000_PHY_CTRL_NOND0A_LPLU; + } + + ew32(POEMB, data); + return 0; +} + +/** + * e1000_acquire_nvm_82571 - Request for access to the EEPROM + * @hw: pointer to the HW structure + * + * To gain access to the EEPROM, first we must obtain a hardware semaphore. + * Then for non-82573 hardware, set the EEPROM access request bit and wait + * for EEPROM access grant bit. If the access grant bit is not set, release + * hardware semaphore. + **/ +static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw) +{ + s32 ret_val; + + ret_val = e1000_get_hw_semaphore_82571(hw); + if (ret_val) + return ret_val; + + switch (hw->mac.type) { + case e1000_82573: + break; + default: + ret_val = e1000e_acquire_nvm(hw); + break; + } + + if (ret_val) + e1000_put_hw_semaphore_82571(hw); + + return ret_val; +} + +/** + * e1000_release_nvm_82571 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit. + **/ +static void e1000_release_nvm_82571(struct e1000_hw *hw) +{ + e1000e_release_nvm(hw); + e1000_put_hw_semaphore_82571(hw); +} + +/** + * e1000_write_nvm_82571 - Write to EEPROM using appropriate interface + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * For non-82573 silicon, write data to EEPROM at offset using SPI interface. + * + * If e1000e_update_nvm_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 ret_val; + + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data); + break; + case e1000_82571: + case e1000_82572: + ret_val = e1000e_write_nvm_spi(hw, offset, words, data); + break; + default: + ret_val = -E1000_ERR_NVM; + break; + } + + return ret_val; +} + +/** + * e1000_update_nvm_checksum_82571 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) +{ + u32 eecd; + s32 ret_val; + u16 i; + + ret_val = e1000e_update_nvm_checksum_generic(hw); + if (ret_val) + return ret_val; + + /* + * If our nvm is an EEPROM, then we're done + * otherwise, commit the checksum to the flash NVM. + */ + if (hw->nvm.type != e1000_nvm_flash_hw) + return ret_val; + + /* Check for pending operations. */ + for (i = 0; i < E1000_FLASH_UPDATES; i++) { + usleep_range(1000, 2000); + if ((er32(EECD) & E1000_EECD_FLUPD) == 0) + break; + } + + if (i == E1000_FLASH_UPDATES) + return -E1000_ERR_NVM; + + /* Reset the firmware if using STM opcode. */ + if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) { + /* + * The enabling of and the actual reset must be done + * in two write cycles. + */ + ew32(HICR, E1000_HICR_FW_RESET_ENABLE); + e1e_flush(); + ew32(HICR, E1000_HICR_FW_RESET); + } + + /* Commit the write to flash */ + eecd = er32(EECD) | E1000_EECD_FLUPD; + ew32(EECD, eecd); + + for (i = 0; i < E1000_FLASH_UPDATES; i++) { + usleep_range(1000, 2000); + if ((er32(EECD) & E1000_EECD_FLUPD) == 0) + break; + } + + if (i == E1000_FLASH_UPDATES) + return -E1000_ERR_NVM; + + return 0; +} + +/** + * e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw) +{ + if (hw->nvm.type == e1000_nvm_flash_hw) + e1000_fix_nvm_checksum_82571(hw); + + return e1000e_validate_nvm_checksum_generic(hw); +} + +/** + * e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * After checking for invalid values, poll the EEPROM to ensure the previous + * command has completed before trying to write the next word. After write + * poll for completion. + * + * If e1000e_update_nvm_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i, eewr = 0; + s32 ret_val = 0; + + /* + * A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + e_dbg("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + for (i = 0; i < words; i++) { + eewr = (data[i] << E1000_NVM_RW_REG_DATA) | + ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) | + E1000_NVM_RW_REG_START; + + ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE); + if (ret_val) + break; + + ew32(EEWR, eewr); + + ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE); + if (ret_val) + break; + } + + return ret_val; +} + +/** + * e1000_get_cfg_done_82571 - Poll for configuration done + * @hw: pointer to the HW structure + * + * Reads the management control register for the config done bit to be set. + **/ +static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) +{ + s32 timeout = PHY_CFG_TIMEOUT; + + while (timeout) { + if (er32(EEMNGCTL) & + E1000_NVM_CFG_DONE_PORT_0) + break; + usleep_range(1000, 2000); + timeout--; + } + if (!timeout) { + e_dbg("MNG configuration cycle has not completed.\n"); + return -E1000_ERR_RESET; + } + + return 0; +} + +/** + * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU D0 state according to the active flag. When activating LPLU + * this function also disables smart speed and vice versa. LPLU will not be + * activated unless the device autonegotiation advertisement meets standards + * of either 10 or 10/100 or 10/100/1000 at all duplexes. This is a function + * pointer entry point only called by PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data); + if (ret_val) + return ret_val; + + if (active) { + data |= IGP02E1000_PM_D0_LPLU; + ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); + if (ret_val) + return ret_val; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); + if (ret_val) + return ret_val; + } else { + data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } + } + + return 0; +} + +/** + * e1000_reset_hw_82571 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. + **/ +static s32 e1000_reset_hw_82571(struct e1000_hw *hw) +{ + u32 ctrl, ctrl_ext; + s32 ret_val; + + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = e1000e_disable_pcie_master(hw); + if (ret_val) + e_dbg("PCI-E Master disable polling has failed.\n"); + + e_dbg("Masking off all interrupts\n"); + ew32(IMC, 0xffffffff); + + ew32(RCTL, 0); + ew32(TCTL, E1000_TCTL_PSP); + e1e_flush(); + + usleep_range(10000, 20000); + + /* + * Must acquire the MDIO ownership before MAC reset. + * Ownership defaults to firmware after a reset. + */ + switch (hw->mac.type) { + case e1000_82573: + ret_val = e1000_get_hw_semaphore_82573(hw); + break; + case e1000_82574: + case e1000_82583: + ret_val = e1000_get_hw_semaphore_82574(hw); + break; + default: + break; + } + if (ret_val) + e_dbg("Cannot acquire MDIO ownership\n"); + + ctrl = er32(CTRL); + + e_dbg("Issuing a global reset to MAC\n"); + ew32(CTRL, ctrl | E1000_CTRL_RST); + + /* Must release MDIO ownership and mutex after MAC reset. */ + switch (hw->mac.type) { + case e1000_82574: + case e1000_82583: + e1000_put_hw_semaphore_82574(hw); + break; + default: + break; + } + + if (hw->nvm.type == e1000_nvm_flash_hw) { + udelay(10); + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + ew32(CTRL_EXT, ctrl_ext); + e1e_flush(); + } + + ret_val = e1000e_get_auto_rd_done(hw); + if (ret_val) + /* We don't want to continue accessing MAC registers. */ + return ret_val; + + /* + * Phy configuration from NVM just starts after EECD_AUTO_RD is set. + * Need to wait for Phy configuration completion before accessing + * NVM and Phy. + */ + + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + msleep(25); + break; + default: + break; + } + + /* Clear any pending interrupt events. */ + ew32(IMC, 0xffffffff); + er32(ICR); + + if (hw->mac.type == e1000_82571) { + /* Install any alternate MAC address into RAR0 */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + if (ret_val) + return ret_val; + + e1000e_set_laa_state_82571(hw, true); + } + + /* Reinitialize the 82571 serdes link state machine */ + if (hw->phy.media_type == e1000_media_type_internal_serdes) + hw->mac.serdes_link_state = e1000_serdes_link_down; + + return 0; +} + +/** + * e1000_init_hw_82571 - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. + **/ +static s32 e1000_init_hw_82571(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 reg_data; + s32 ret_val; + u16 i, rar_count = mac->rar_entry_count; + + e1000_initialize_hw_bits_82571(hw); + + /* Initialize identification LED */ + ret_val = e1000e_id_led_init(hw); + if (ret_val) + e_dbg("Error initializing identification LED\n"); + /* This is not fatal and we should not stop init due to this */ + + /* Disabling VLAN filtering */ + e_dbg("Initializing the IEEE VLAN\n"); + mac->ops.clear_vfta(hw); + + /* Setup the receive address. */ + /* + * If, however, a locally administered address was assigned to the + * 82571, we must reserve a RAR for it to work around an issue where + * resetting one port will reload the MAC on the other port. + */ + if (e1000e_get_laa_state_82571(hw)) + rar_count--; + e1000e_init_rx_addrs(hw, rar_count); + + /* Zero out the Multicast HASH table */ + e_dbg("Zeroing the MTA\n"); + for (i = 0; i < mac->mta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); + + /* Setup link and flow control */ + ret_val = e1000_setup_link_82571(hw); + + /* Set the transmit descriptor write-back policy */ + reg_data = er32(TXDCTL(0)); + reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | + E1000_TXDCTL_FULL_TX_DESC_WB | + E1000_TXDCTL_COUNT_DESC; + ew32(TXDCTL(0), reg_data); + + /* ...for both queues. */ + switch (mac->type) { + case e1000_82573: + e1000e_enable_tx_pkt_filtering(hw); + /* fall through */ + case e1000_82574: + case e1000_82583: + reg_data = er32(GCR); + reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + ew32(GCR, reg_data); + break; + default: + reg_data = er32(TXDCTL(1)); + reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | + E1000_TXDCTL_FULL_TX_DESC_WB | + E1000_TXDCTL_COUNT_DESC; + ew32(TXDCTL(1), reg_data); + break; + } + + /* + * Clear all of the statistics registers (clear on read). It is + * important that we do this after we have tried to establish link + * because the symbol error count will increment wildly if there + * is no link. + */ + e1000_clear_hw_cntrs_82571(hw); + + return ret_val; +} + +/** + * e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits + * @hw: pointer to the HW structure + * + * Initializes required hardware-dependent bits needed for normal operation. + **/ +static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) +{ + u32 reg; + + /* Transmit Descriptor Control 0 */ + reg = er32(TXDCTL(0)); + reg |= (1 << 22); + ew32(TXDCTL(0), reg); + + /* Transmit Descriptor Control 1 */ + reg = er32(TXDCTL(1)); + reg |= (1 << 22); + ew32(TXDCTL(1), reg); + + /* Transmit Arbitration Control 0 */ + reg = er32(TARC(0)); + reg &= ~(0xF << 27); /* 30:27 */ + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26); + break; + default: + break; + } + ew32(TARC(0), reg); + + /* Transmit Arbitration Control 1 */ + reg = er32(TARC(1)); + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + reg &= ~((1 << 29) | (1 << 30)); + reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26); + if (er32(TCTL) & E1000_TCTL_MULR) + reg &= ~(1 << 28); + else + reg |= (1 << 28); + ew32(TARC(1), reg); + break; + default: + break; + } + + /* Device Control */ + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + reg = er32(CTRL); + reg &= ~(1 << 29); + ew32(CTRL, reg); + break; + default: + break; + } + + /* Extended Device Control */ + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + reg = er32(CTRL_EXT); + reg &= ~(1 << 23); + reg |= (1 << 22); + ew32(CTRL_EXT, reg); + break; + default: + break; + } + + if (hw->mac.type == e1000_82571) { + reg = er32(PBA_ECC); + reg |= E1000_PBA_ECC_CORR_EN; + ew32(PBA_ECC, reg); + } + /* + * Workaround for hardware errata. + * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572 + */ + + if ((hw->mac.type == e1000_82571) || + (hw->mac.type == e1000_82572)) { + reg = er32(CTRL_EXT); + reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN; + ew32(CTRL_EXT, reg); + } + + + /* PCI-Ex Control Registers */ + switch (hw->mac.type) { + case e1000_82574: + case e1000_82583: + reg = er32(GCR); + reg |= (1 << 22); + ew32(GCR, reg); + + /* + * Workaround for hardware errata. + * apply workaround for hardware errata documented in errata + * docs Fixes issue where some error prone or unreliable PCIe + * completions are occurring, particularly with ASPM enabled. + * Without fix, issue can cause Tx timeouts. + */ + reg = er32(GCR2); + reg |= 1; + ew32(GCR2, reg); + break; + default: + break; + } +} + +/** + * e1000_clear_vfta_82571 - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +static void e1000_clear_vfta_82571(struct e1000_hw *hw) +{ + u32 offset; + u32 vfta_value = 0; + u32 vfta_offset = 0; + u32 vfta_bit_in_reg = 0; + + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + if (hw->mng_cookie.vlan_id != 0) { + /* + * The VFTA is a 4096b bit-field, each identifying + * a single VLAN ID. The following operations + * determine which 32b entry (i.e. offset) into the + * array we want to set the VLAN ID (i.e. bit) of + * the manageability unit. + */ + vfta_offset = (hw->mng_cookie.vlan_id >> + E1000_VFTA_ENTRY_SHIFT) & + E1000_VFTA_ENTRY_MASK; + vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & + E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + } + break; + default: + break; + } + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + /* + * If the offset we want to clear is the same offset of the + * manageability VLAN ID, then clear all bits except that of + * the manageability unit. + */ + vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value); + e1e_flush(); + } +} + +/** + * e1000_check_mng_mode_82574 - Check manageability is enabled + * @hw: pointer to the HW structure + * + * Reads the NVM Initialization Control Word 2 and returns true + * (>0) if any manageability is enabled, else false (0). + **/ +static bool e1000_check_mng_mode_82574(struct e1000_hw *hw) +{ + u16 data; + + e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data); + return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0; +} + +/** + * e1000_led_on_82574 - Turn LED on + * @hw: pointer to the HW structure + * + * Turn LED on. + **/ +static s32 e1000_led_on_82574(struct e1000_hw *hw) +{ + u32 ctrl; + u32 i; + + ctrl = hw->mac.ledctl_mode2; + if (!(E1000_STATUS_LU & er32(STATUS))) { + /* + * If no link, then turn LED on by setting the invert bit + * for each LED that's "on" (0x0E) in ledctl_mode2. + */ + for (i = 0; i < 4; i++) + if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == + E1000_LEDCTL_MODE_LED_ON) + ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8)); + } + ew32(LEDCTL, ctrl); + + return 0; +} + +/** + * e1000_check_phy_82574 - check 82574 phy hung state + * @hw: pointer to the HW structure + * + * Returns whether phy is hung or not + **/ +bool e1000_check_phy_82574(struct e1000_hw *hw) +{ + u16 status_1kbt = 0; + u16 receive_errors = 0; + bool phy_hung = false; + s32 ret_val = 0; + + /* + * Read PHY Receive Error counter first, if its is max - all F's then + * read the Base1000T status register If both are max then PHY is hung. + */ + ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors); + + if (ret_val) + goto out; + if (receive_errors == E1000_RECEIVE_ERROR_MAX) { + ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt); + if (ret_val) + goto out; + if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) == + E1000_IDLE_ERROR_COUNT_MASK) + phy_hung = true; + } +out: + return phy_hung; +} + +/** + * e1000_setup_link_82571 - Setup flow control and link settings + * @hw: pointer to the HW structure + * + * Determines which flow control settings to use, then configures flow + * control. Calls the appropriate media-specific link configuration + * function. Assuming the adapter has a valid link partner, a valid link + * should be established. Assumes the hardware has previously been reset + * and the transmitter and receiver are not enabled. + **/ +static s32 e1000_setup_link_82571(struct e1000_hw *hw) +{ + /* + * 82573 does not have a word in the NVM to determine + * the default flow control setting, so we explicitly + * set it to full. + */ + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + if (hw->fc.requested_mode == e1000_fc_default) + hw->fc.requested_mode = e1000_fc_full; + break; + default: + break; + } + + return e1000e_setup_link(hw); +} + +/** + * e1000_setup_copper_link_82571 - Configure copper link settings + * @hw: pointer to the HW structure + * + * Configures the link for auto-neg or forced speed and duplex. Then we check + * for link, once link is established calls to configure collision distance + * and flow control are called. + **/ +static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ew32(CTRL, ctrl); + + switch (hw->phy.type) { + case e1000_phy_m88: + case e1000_phy_bm: + ret_val = e1000e_copper_link_setup_m88(hw); + break; + case e1000_phy_igp_2: + ret_val = e1000e_copper_link_setup_igp(hw); + break; + default: + return -E1000_ERR_PHY; + break; + } + + if (ret_val) + return ret_val; + + ret_val = e1000e_setup_copper_link(hw); + + return ret_val; +} + +/** + * e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes + * @hw: pointer to the HW structure + * + * Configures collision distance and flow control for fiber and serdes links. + * Upon successful setup, poll for link. + **/ +static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) +{ + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + /* + * If SerDes loopback mode is entered, there is no form + * of reset to take the adapter out of that mode. So we + * have to explicitly take the adapter out of loopback + * mode. This prevents drivers from twiddling their thumbs + * if another tool failed to take it out of loopback mode. + */ + ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); + break; + default: + break; + } + + return e1000e_setup_fiber_serdes_link(hw); +} + +/** + * e1000_check_for_serdes_link_82571 - Check for link (Serdes) + * @hw: pointer to the HW structure + * + * Reports the link state as up or down. + * + * If autonegotiation is supported by the link partner, the link state is + * determined by the result of autonegotiation. This is the most likely case. + * If autonegotiation is not supported by the link partner, and the link + * has a valid signal, force the link up. + * + * The link state is represented internally here by 4 states: + * + * 1) down + * 2) autoneg_progress + * 3) autoneg_complete (the link successfully autonegotiated) + * 4) forced_up (the link has been forced up, it did not autonegotiate) + * + **/ +static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + u32 txcw; + u32 i; + s32 ret_val = 0; + + ctrl = er32(CTRL); + status = er32(STATUS); + rxcw = er32(RXCW); + + if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { + + /* Receiver is synchronized with no invalid bits. */ + switch (mac->serdes_link_state) { + case e1000_serdes_link_autoneg_complete: + if (!(status & E1000_STATUS_LU)) { + /* + * We have lost link, retry autoneg before + * reporting link failure + */ + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + mac->serdes_has_link = false; + e_dbg("AN_UP -> AN_PROG\n"); + } else { + mac->serdes_has_link = true; + } + break; + + case e1000_serdes_link_forced_up: + /* + * If we are receiving /C/ ordered sets, re-enable + * auto-negotiation in the TXCW register and disable + * forced link in the Device Control register in an + * attempt to auto-negotiate with our link partner. + * If the partner code word is null, stop forcing + * and restart auto negotiation. + */ + if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW)) { + /* Enable autoneg, and unforce link up */ + ew32(TXCW, mac->txcw); + ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + mac->serdes_has_link = false; + e_dbg("FORCED_UP -> AN_PROG\n"); + } else { + mac->serdes_has_link = true; + } + break; + + case e1000_serdes_link_autoneg_progress: + if (rxcw & E1000_RXCW_C) { + /* + * We received /C/ ordered sets, meaning the + * link partner has autonegotiated, and we can + * trust the Link Up (LU) status bit. + */ + if (status & E1000_STATUS_LU) { + mac->serdes_link_state = + e1000_serdes_link_autoneg_complete; + e_dbg("AN_PROG -> AN_UP\n"); + mac->serdes_has_link = true; + } else { + /* Autoneg completed, but failed. */ + mac->serdes_link_state = + e1000_serdes_link_down; + e_dbg("AN_PROG -> DOWN\n"); + } + } else { + /* + * The link partner did not autoneg. + * Force link up and full duplex, and change + * state to forced. + */ + ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + ew32(CTRL, ctrl); + + /* Configure Flow Control after link up. */ + ret_val = e1000e_config_fc_after_link_up(hw); + if (ret_val) { + e_dbg("Error config flow control\n"); + break; + } + mac->serdes_link_state = + e1000_serdes_link_forced_up; + mac->serdes_has_link = true; + e_dbg("AN_PROG -> FORCED_UP\n"); + } + break; + + case e1000_serdes_link_down: + default: + /* + * The link was down but the receiver has now gained + * valid sync, so lets see if we can bring the link + * up. + */ + ew32(TXCW, mac->txcw); + ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + mac->serdes_has_link = false; + e_dbg("DOWN -> AN_PROG\n"); + break; + } + } else { + if (!(rxcw & E1000_RXCW_SYNCH)) { + mac->serdes_has_link = false; + mac->serdes_link_state = e1000_serdes_link_down; + e_dbg("ANYSTATE -> DOWN\n"); + } else { + /* + * Check several times, if Sync and Config + * both are consistently 1 then simply ignore + * the Invalid bit and restart Autoneg + */ + for (i = 0; i < AN_RETRY_COUNT; i++) { + udelay(10); + rxcw = er32(RXCW); + if ((rxcw & E1000_RXCW_IV) && + !((rxcw & E1000_RXCW_SYNCH) && + (rxcw & E1000_RXCW_C))) { + mac->serdes_has_link = false; + mac->serdes_link_state = + e1000_serdes_link_down; + e_dbg("ANYSTATE -> DOWN\n"); + break; + } + } + + if (i == AN_RETRY_COUNT) { + txcw = er32(TXCW); + txcw |= E1000_TXCW_ANE; + ew32(TXCW, txcw); + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + mac->serdes_has_link = false; + e_dbg("ANYSTATE -> AN_PROG\n"); + } + } + } + + return ret_val; +} + +/** + * e1000_valid_led_default_82571 - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + e_dbg("NVM Read Error\n"); + return ret_val; + } + + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + if (*data == ID_LED_RESERVED_F746) + *data = ID_LED_DEFAULT_82573; + break; + default: + if (*data == ID_LED_RESERVED_0000 || + *data == ID_LED_RESERVED_FFFF) + *data = ID_LED_DEFAULT; + break; + } + + return 0; +} + +/** + * e1000e_get_laa_state_82571 - Get locally administered address state + * @hw: pointer to the HW structure + * + * Retrieve and return the current locally administered address state. + **/ +bool e1000e_get_laa_state_82571(struct e1000_hw *hw) +{ + if (hw->mac.type != e1000_82571) + return false; + + return hw->dev_spec.e82571.laa_is_present; +} + +/** + * e1000e_set_laa_state_82571 - Set locally administered address state + * @hw: pointer to the HW structure + * @state: enable/disable locally administered address + * + * Enable/Disable the current locally administered address state. + **/ +void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) +{ + if (hw->mac.type != e1000_82571) + return; + + hw->dev_spec.e82571.laa_is_present = state; + + /* If workaround is activated... */ + if (state) + /* + * Hold a copy of the LAA in RAR[14] This is done so that + * between the time RAR[0] gets clobbered and the time it + * gets fixed, the actual LAA is in one of the RARs and no + * incoming packets directed to this port are dropped. + * Eventually the LAA will be in RAR[0] and RAR[14]. + */ + e1000e_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1); +} + +/** + * e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum + * @hw: pointer to the HW structure + * + * Verifies that the EEPROM has completed the update. After updating the + * EEPROM, we need to check bit 15 in work 0x23 for the checksum fix. If + * the checksum fix is not implemented, we need to set the bit and update + * the checksum. Otherwise, if bit 15 is set and the checksum is incorrect, + * we need to return bad checksum. + **/ +static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + s32 ret_val; + u16 data; + + if (nvm->type != e1000_nvm_flash_hw) + return 0; + + /* + * Check bit 4 of word 10h. If it is 0, firmware is done updating + * 10h-12h. Checksum may need to be fixed. + */ + ret_val = e1000_read_nvm(hw, 0x10, 1, &data); + if (ret_val) + return ret_val; + + if (!(data & 0x10)) { + /* + * Read 0x23 and check bit 15. This bit is a 1 + * when the checksum has already been fixed. If + * the checksum is still wrong and this bit is a + * 1, we need to return bad checksum. Otherwise, + * we need to set this bit to a 1 and update the + * checksum. + */ + ret_val = e1000_read_nvm(hw, 0x23, 1, &data); + if (ret_val) + return ret_val; + + if (!(data & 0x8000)) { + data |= 0x8000; + ret_val = e1000_write_nvm(hw, 0x23, 1, &data); + if (ret_val) + return ret_val; + ret_val = e1000e_update_nvm_checksum(hw); + } + } + + return 0; +} + +/** + * e1000_read_mac_addr_82571 - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw) +{ + s32 ret_val = 0; + + if (hw->mac.type == e1000_82571) { + /* + * If there's an alternate MAC address place it in RAR0 + * so that it will override the Si installed default perm + * address. + */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + if (ret_val) + goto out; + } + + ret_val = e1000_read_mac_addr_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_power_down_phy_copper_82571 - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + struct e1000_mac_info *mac = &hw->mac; + + if (!(phy->ops.check_reset_block)) + return; + + /* If the management interface is not enabled, then power down */ + if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); +} + +/** + * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters + * @hw: pointer to the HW structure + * + * Clears the hardware counters by reading the counter registers. + **/ +static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw) +{ + e1000e_clear_hw_cntrs_base(hw); + + er32(PRC64); + er32(PRC127); + er32(PRC255); + er32(PRC511); + er32(PRC1023); + er32(PRC1522); + er32(PTC64); + er32(PTC127); + er32(PTC255); + er32(PTC511); + er32(PTC1023); + er32(PTC1522); + + er32(ALGNERRC); + er32(RXERRC); + er32(TNCRS); + er32(CEXTERR); + er32(TSCTC); + er32(TSCTFC); + + er32(MGTPRC); + er32(MGTPDC); + er32(MGTPTC); + + er32(IAC); + er32(ICRXOC); + + er32(ICRXPTC); + er32(ICRXATC); + er32(ICTXPTC); + er32(ICTXATC); + er32(ICTXQEC); + er32(ICTXQMTC); + er32(ICRXDMTC); +} + +static const struct e1000_mac_operations e82571_mac_ops = { + /* .check_mng_mode: mac type dependent */ + /* .check_for_link: media type dependent */ + .id_led_init = e1000e_id_led_init, + .cleanup_led = e1000e_cleanup_led_generic, + .clear_hw_cntrs = e1000_clear_hw_cntrs_82571, + .get_bus_info = e1000e_get_bus_info_pcie, + .set_lan_id = e1000_set_lan_id_multi_port_pcie, + /* .get_link_up_info: media type dependent */ + /* .led_on: mac type dependent */ + .led_off = e1000e_led_off_generic, + .update_mc_addr_list = e1000e_update_mc_addr_list_generic, + .write_vfta = e1000_write_vfta_generic, + .clear_vfta = e1000_clear_vfta_82571, + .reset_hw = e1000_reset_hw_82571, + .init_hw = e1000_init_hw_82571, + .setup_link = e1000_setup_link_82571, + /* .setup_physical_interface: media type dependent */ + .setup_led = e1000e_setup_led_generic, + .read_mac_addr = e1000_read_mac_addr_82571, +}; + +static const struct e1000_phy_operations e82_phy_ops_igp = { + .acquire = e1000_get_hw_semaphore_82571, + .check_polarity = e1000_check_polarity_igp, + .check_reset_block = e1000e_check_reset_block_generic, + .commit = NULL, + .force_speed_duplex = e1000e_phy_force_speed_duplex_igp, + .get_cfg_done = e1000_get_cfg_done_82571, + .get_cable_length = e1000e_get_cable_length_igp_2, + .get_info = e1000e_get_phy_info_igp, + .read_reg = e1000e_read_phy_reg_igp, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, + .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, + .set_d3_lplu_state = e1000e_set_d3_lplu_state, + .write_reg = e1000e_write_phy_reg_igp, + .cfg_on_link_up = NULL, +}; + +static const struct e1000_phy_operations e82_phy_ops_m88 = { + .acquire = e1000_get_hw_semaphore_82571, + .check_polarity = e1000_check_polarity_m88, + .check_reset_block = e1000e_check_reset_block_generic, + .commit = e1000e_phy_sw_reset, + .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, + .get_cfg_done = e1000e_get_cfg_done, + .get_cable_length = e1000e_get_cable_length_m88, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000e_read_phy_reg_m88, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, + .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, + .set_d3_lplu_state = e1000e_set_d3_lplu_state, + .write_reg = e1000e_write_phy_reg_m88, + .cfg_on_link_up = NULL, +}; + +static const struct e1000_phy_operations e82_phy_ops_bm = { + .acquire = e1000_get_hw_semaphore_82571, + .check_polarity = e1000_check_polarity_m88, + .check_reset_block = e1000e_check_reset_block_generic, + .commit = e1000e_phy_sw_reset, + .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, + .get_cfg_done = e1000e_get_cfg_done, + .get_cable_length = e1000e_get_cable_length_m88, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000e_read_phy_reg_bm2, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, + .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, + .set_d3_lplu_state = e1000e_set_d3_lplu_state, + .write_reg = e1000e_write_phy_reg_bm2, + .cfg_on_link_up = NULL, +}; + +static const struct e1000_nvm_operations e82571_nvm_ops = { + .acquire = e1000_acquire_nvm_82571, + .read = e1000e_read_nvm_eerd, + .release = e1000_release_nvm_82571, + .update = e1000_update_nvm_checksum_82571, + .valid_led_default = e1000_valid_led_default_82571, + .validate = e1000_validate_nvm_checksum_82571, + .write = e1000_write_nvm_82571, +}; + +const struct e1000_info e1000_82571_info = { + .mac = e1000_82571, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_JUMBO_FRAMES + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_RESET_OVERWRITES_LAA /* errata */ + | FLAG_TARC_SPEED_MODE_BIT /* errata */ + | FLAG_APME_CHECK_PORT_B, + .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */ + | FLAG2_DMA_BURST, + .pba = 38, + .max_hw_frame_size = DEFAULT_JUMBO, + .get_variants = e1000_get_variants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_igp, + .nvm_ops = &e82571_nvm_ops, +}; + +const struct e1000_info e1000_82572_info = { + .mac = e1000_82572, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_JUMBO_FRAMES + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_TARC_SPEED_MODE_BIT, /* errata */ + .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */ + | FLAG2_DMA_BURST, + .pba = 38, + .max_hw_frame_size = DEFAULT_JUMBO, + .get_variants = e1000_get_variants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_igp, + .nvm_ops = &e82571_nvm_ops, +}; + +const struct e1000_info e1000_82573_info = { + .mac = e1000_82573, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_HAS_AMT + | FLAG_HAS_SWSM_ON_LOAD, + .flags2 = FLAG2_DISABLE_ASPM_L1 + | FLAG2_DISABLE_ASPM_L0S, + .pba = 20, + .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, + .get_variants = e1000_get_variants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_m88, + .nvm_ops = &e82571_nvm_ops, +}; + +const struct e1000_info e1000_82574_info = { + .mac = e1000_82574, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_MSIX + | FLAG_HAS_JUMBO_FRAMES + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_HAS_AMT + | FLAG_HAS_CTRLEXT_ON_LOAD, + .flags2 = FLAG2_CHECK_PHY_HANG + | FLAG2_DISABLE_ASPM_L0S + | FLAG2_NO_DISABLE_RX, + .pba = 32, + .max_hw_frame_size = DEFAULT_JUMBO, + .get_variants = e1000_get_variants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_bm, + .nvm_ops = &e82571_nvm_ops, +}; + +const struct e1000_info e1000_82583_info = { + .mac = e1000_82583, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_HAS_AMT + | FLAG_HAS_JUMBO_FRAMES + | FLAG_HAS_CTRLEXT_ON_LOAD, + .flags2 = FLAG2_DISABLE_ASPM_L0S + | FLAG2_NO_DISABLE_RX, + .pba = 32, + .max_hw_frame_size = DEFAULT_JUMBO, + .get_variants = e1000_get_variants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_bm, + .nvm_ops = &e82571_nvm_ops, +}; + |