diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 14 |
1 files changed, 11 insertions, 3 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 28a0bcfe61ff..1b1999d34c71 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -4949,6 +4949,10 @@ #define UMAC_COMMAND_CONFIG_REG_SW_RESET (0x1<<13) #define UMAC_COMMAND_CONFIG_REG_TX_ENA (0x1<<0) #define UMAC_REG_COMMAND_CONFIG 0x8 +/* [RW 16] This is the duration for which MAC must wait to go back to ACTIVE + * state from LPI state when it receives packet for transmission. The + * decrement unit is 1 micro-second. */ +#define UMAC_REG_EEE_WAKE_TIMER 0x6c /* [RW 32] Register Bit 0 refers to Bit 16 of the MAC address; Bit 1 refers * to bit 17 of the MAC address etc. */ #define UMAC_REG_MAC_ADDR0 0xc @@ -4958,6 +4962,8 @@ /* [RW 14] Defines a 14-Bit maximum frame length used by the MAC receive * logic to check frames. */ #define UMAC_REG_MAXFR 0x14 +#define UMAC_REG_UMAC_EEE_CTRL 0x64 +#define UMAC_UMAC_EEE_CTRL_REG_EEE_EN (0x1<<3) /* [RW 8] The event id for aggregated interrupt 0 */ #define USDM_REG_AGG_INT_EVENT_0 0xc4038 #define USDM_REG_AGG_INT_EVENT_1 0xc403c @@ -6992,6 +6998,7 @@ Theotherbitsarereservedandshouldbezero*/ /* BCM84833 only */ #define MDIO_84833_TOP_CFG_FW_REV 0x400f #define MDIO_84833_TOP_CFG_FW_EEE 0x10b1 +#define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81 #define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a #define MDIO_84833_SUPER_ISOLATE 0x8000 /* These are mailbox register set used by 84833. */ @@ -7160,10 +7167,11 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_REG_GPHY_ID_54618SE 0x5cd5 #define MDIO_REG_GPHY_CL45_ADDR_REG 0xd #define MDIO_REG_GPHY_CL45_DATA_REG 0xe -#define MDIO_REG_GPHY_EEE_ADV 0x3c -#define MDIO_REG_GPHY_EEE_1G (0x1 << 2) -#define MDIO_REG_GPHY_EEE_100 (0x1 << 1) #define MDIO_REG_GPHY_EEE_RESOLVED 0x803e +#define MDIO_REG_GPHY_EXP_ACCESS_GATE 0x15 +#define MDIO_REG_GPHY_EXP_ACCESS 0x17 +#define MDIO_REG_GPHY_EXP_ACCESS_TOP 0xd00 +#define MDIO_REG_GPHY_EXP_TOP_2K_BUF 0x40 #define MDIO_REG_GPHY_AUX_STATUS 0x19 #define MDIO_REG_INTR_STATUS 0x1a #define MDIO_REG_INTR_MASK 0x1b |