diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 79 |
1 files changed, 53 insertions, 26 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 49d511092c82..4dead49bd5cb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -1,6 +1,8 @@ -/* bnx2x_reg.h: Broadcom Everest network driver. +/* bnx2x_reg.h: Qlogic Everest network driver. * * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -2137,6 +2139,10 @@ /* [RW 1] When this bit is set; the LLH will expect all packets to be with e1hov */ #define NIG_REG_LLH_E1HOV_MODE 0x160d8 +/* [RW 16] Outer VLAN type identifier for multi-function mode. In non + * multi-function mode; it will hold the inner VLAN type. Typically 0x8100. + */ +#define NIG_REG_LLH_E1HOV_TYPE_1 0x16028 /* [RW 1] When this bit is set; the LLH will classify the packet before sending it to the BRB or calculating WoL on it. */ #define NIG_REG_LLH_MF_MODE 0x16024 @@ -2953,7 +2959,12 @@ #define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac /* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */ #define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0 -#define PB_REG_CONTROL 0 +/* [RW 16] One of 8 values that should be compared to type in Ethernet + * parsing. If there is a match; the field after Ethernet is the first VLAN. + * Reset value is 0x8100 which is the standard VLAN type. Note that when + * checking second VLAN; type is compared only to 0x8100. + */ +#define PBF_REG_VLAN_TYPE_0 0x15c06c /* [RW 2] Interrupt mask register #0 read/write */ #define PB_REG_PB_INT_MASK 0x28 /* [R 2] Interrupt register #0 read */ @@ -3372,6 +3383,12 @@ #define PRS_REG_TCM_CURRENT_CREDIT 0x40160 /* [R 8] debug only: TSDM current credit. Transaction based. */ #define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c +/* [RW 16] One of 8 values that should be compared to type in Ethernet + * parsing. If there is a match; the field after Ethernet is the first VLAN. + * Reset value is 0x8100 which is the standard VLAN type. Note that when + * checking second VLAN; type is compared only to 0x8100. + */ +#define PRS_REG_VLAN_TYPE_0 0x401a8 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19) #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20) #define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22) @@ -7240,6 +7257,9 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0 #define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40 #define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1 +#define MDIO_AN_REG_848xx_ID_MSB 0xffe2 +#define BCM84858_PHY_ID 0x600d +#define MDIO_AN_REG_848xx_ID_LSB 0xffe3 #define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4 #define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6 #define MDIO_AN_REG_8481_1000T_CTRL 0xffe9 @@ -7283,31 +7303,31 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81 #define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a #define MDIO_84833_SUPER_ISOLATE 0x8000 -/* These are mailbox register set used by 84833. */ -#define MDIO_84833_TOP_CFG_SCRATCH_REG0 0x4005 -#define MDIO_84833_TOP_CFG_SCRATCH_REG1 0x4006 -#define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007 -#define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008 -#define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009 -#define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037 -#define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038 -#define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039 -#define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a -#define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b -#define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c -#define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0 -#define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26 -#define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27 -#define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28 -#define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29 -#define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30 -#define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31 +/* These are mailbox register set used by 84833/84858. */ +#define MDIO_848xx_TOP_CFG_SCRATCH_REG0 0x4005 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG1 0x4006 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG2 0x4007 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG3 0x4008 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG4 0x4009 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG26 0x4037 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG27 0x4038 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG28 0x4039 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG29 0x403a +#define MDIO_848xx_TOP_CFG_SCRATCH_REG30 0x403b +#define MDIO_848xx_TOP_CFG_SCRATCH_REG31 0x403c +#define MDIO_848xx_CMD_HDLR_COMMAND (MDIO_848xx_TOP_CFG_SCRATCH_REG0) +#define MDIO_848xx_CMD_HDLR_STATUS (MDIO_848xx_TOP_CFG_SCRATCH_REG26) +#define MDIO_848xx_CMD_HDLR_DATA1 (MDIO_848xx_TOP_CFG_SCRATCH_REG27) +#define MDIO_848xx_CMD_HDLR_DATA2 (MDIO_848xx_TOP_CFG_SCRATCH_REG28) +#define MDIO_848xx_CMD_HDLR_DATA3 (MDIO_848xx_TOP_CFG_SCRATCH_REG29) +#define MDIO_848xx_CMD_HDLR_DATA4 (MDIO_848xx_TOP_CFG_SCRATCH_REG30) +#define MDIO_848xx_CMD_HDLR_DATA5 (MDIO_848xx_TOP_CFG_SCRATCH_REG31) -/* Mailbox command set used by 84833. */ -#define PHY84833_CMD_SET_PAIR_SWAP 0x8001 -#define PHY84833_CMD_GET_EEE_MODE 0x8008 -#define PHY84833_CMD_SET_EEE_MODE 0x8009 -/* Mailbox status set used by 84833. */ +/* Mailbox command set used by 84833/84858 */ +#define PHY848xx_CMD_SET_PAIR_SWAP 0x8001 +#define PHY848xx_CMD_GET_EEE_MODE 0x8008 +#define PHY848xx_CMD_SET_EEE_MODE 0x8009 +/* Mailbox status set used by 84833 only */ #define PHY84833_STATUS_CMD_RECEIVED 0x0001 #define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002 #define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004 @@ -7318,6 +7338,13 @@ Theotherbitsarereservedandshouldbezero*/ #define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080 #define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5 +/* Mailbox status set used by 84858 only */ +#define PHY84858_STATUS_CMD_RECEIVED 0x0001 +#define PHY84858_STATUS_CMD_IN_PROGRESS 0x0002 +#define PHY84858_STATUS_CMD_COMPLETE_PASS 0x0004 +#define PHY84858_STATUS_CMD_COMPLETE_ERROR 0x0008 +#define PHY84858_STATUS_CMD_SYSTEM_BUSY 0xbbbb + /* Warpcore clause 45 addressing */ #define MDIO_WC_DEVAD 0x3 |