summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/Kconfig24
-rw-r--r--drivers/net/dsa/Makefile3
-rw-r--r--drivers/net/dsa/bcm_sf2.c7
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.c17
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.h23
-rw-r--r--drivers/net/dsa/mv88e6xxx/global2.h3
-rw-r--r--drivers/net/dsa/mv88e6xxx/global2_avb.c25
-rw-r--r--drivers/net/dsa/mv88e6xxx/hwtstamp.c134
-rw-r--r--drivers/net/dsa/mv88e6xxx/hwtstamp.h14
-rw-r--r--drivers/net/dsa/mv88e6xxx/ptp.c101
-rw-r--r--drivers/net/dsa/mv88e6xxx/ptp.h71
-rw-r--r--drivers/net/dsa/realtek-smi.c489
-rw-r--r--drivers/net/dsa/realtek-smi.h144
-rw-r--r--drivers/net/dsa/rtl8366.c515
-rw-r--r--drivers/net/dsa/rtl8366rb.c1424
-rw-r--r--drivers/net/dsa/vitesse-vsc73xx.c1365
16 files changed, 4298 insertions, 61 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 2b81b97e994f..d3ce1e4cb4d3 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -5,7 +5,7 @@ source "drivers/net/dsa/b53/Kconfig"
config NET_DSA_BCM_SF2
tristate "Broadcom Starfighter 2 Ethernet switch support"
- depends on HAS_IOMEM && NET_DSA && OF_MDIO
+ depends on HAS_IOMEM && NET_DSA
select NET_DSA_TAG_BRCM
select FIXED_PHY
select BCM7XXX_PHY
@@ -52,6 +52,17 @@ config NET_DSA_QCA8K
This enables support for the Qualcomm Atheros QCA8K Ethernet
switch chips.
+config NET_DSA_REALTEK_SMI
+ tristate "Realtek SMI Ethernet switch family support"
+ depends on NET_DSA
+ select FIXED_PHY
+ select IRQ_DOMAIN
+ select REALTEK_PHY
+ select REGMAP
+ ---help---
+ This enables support for the Realtek SMI-based switch
+ chips, currently only RTL8366RB.
+
config NET_DSA_SMSC_LAN9303
tristate
select NET_DSA_TAG_LAN9303
@@ -76,4 +87,15 @@ config NET_DSA_SMSC_LAN9303_MDIO
Enable access functions if the SMSC/Microchip LAN9303 is configured
for MDIO managed mode.
+config NET_DSA_VITESSE_VSC73XX
+ tristate "Vitesse VSC7385/7388/7395/7398 support"
+ depends on OF && SPI
+ depends on NET_DSA
+ select FIXED_PHY
+ select VITESSE_PHY
+ select GPIOLIB
+ ---help---
+ This enables support for the Vitesse VSC7385, VSC7388,
+ VSC7395 and VSC7398 SparX integrated ethernet switches.
+
endmenu
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index 15c2a831edf1..46c1cba91ffe 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -8,9 +8,12 @@ endif
obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
+obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek.o
+realtek-objs := realtek-smi.o rtl8366.o rtl8366rb.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
+obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx.o
obj-y += b53/
obj-y += microchip/
obj-y += mv88e6xxx/
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 02e8982519ce..ac96ff40d37e 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -220,7 +220,7 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- u32 off, reg;
+ u32 reg;
if (priv->wol_ports_mask & (1 << port))
return;
@@ -231,11 +231,6 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1)
bcm_sf2_gphy_enable_set(ds, false);
- if (dsa_is_cpu_port(ds, port))
- off = CORE_IMP_CTL;
- else
- off = CORE_G_PCTL_PORT(port);
-
b53_disable_port(ds, port, phy);
/* Power down the port memory */
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 9ef07a06aceb..a80767d3c405 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2819,6 +2819,8 @@ static const struct mv88e6xxx_ops mv88e6161_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
+ .avb_ops = &mv88e6165_avb_ops,
+ .ptp_ops = &mv88e6165_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6165_ops = {
@@ -2847,6 +2849,8 @@ static const struct mv88e6xxx_ops mv88e6165_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
+ .avb_ops = &mv88e6165_avb_ops,
+ .ptp_ops = &mv88e6165_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6171_ops = {
@@ -3143,6 +3147,8 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
.serdes_power = mv88e6390_serdes_power,
+ .avb_ops = &mv88e6390_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6240_ops = {
@@ -3185,6 +3191,7 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
.serdes_power = mv88e6352_serdes_power,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6290_ops = {
@@ -3224,6 +3231,7 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
.serdes_power = mv88e6390_serdes_power,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6320_ops = {
@@ -3262,6 +3270,7 @@ static const struct mv88e6xxx_ops mv88e6320_ops = {
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6321_ops = {
@@ -3298,6 +3307,7 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6341_ops = {
@@ -3338,6 +3348,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6350_ops = {
@@ -3411,6 +3422,7 @@ static const struct mv88e6xxx_ops mv88e6351_ops = {
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.avb_ops = &mv88e6352_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6352_ops = {
@@ -3453,6 +3465,7 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
.serdes_power = mv88e6352_serdes_power,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
.serdes_get_sset_count = mv88e6352_serdes_get_sset_count,
.serdes_get_strings = mv88e6352_serdes_get_strings,
.serdes_get_stats = mv88e6352_serdes_get_stats,
@@ -3497,6 +3510,7 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
.serdes_power = mv88e6390_serdes_power,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_ops mv88e6390x_ops = {
@@ -3538,6 +3552,7 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.serdes_power = mv88e6390_serdes_power,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
+ .ptp_ops = &mv88e6352_ptp_ops,
};
static const struct mv88e6xxx_info mv88e6xxx_table[] = {
@@ -3689,6 +3704,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.pvt = true,
.multi_chip = true,
.tag_protocol = DSA_TAG_PROTO_EDSA,
+ .ptp_support = true,
.ops = &mv88e6161_ops,
},
@@ -3711,6 +3727,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.pvt = true,
.multi_chip = true,
.tag_protocol = DSA_TAG_PROTO_DSA,
+ .ptp_support = true,
.ops = &mv88e6165_ops,
},
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 8ac3fbb15352..6aa6197ddc10 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -155,6 +155,7 @@ struct mv88e6xxx_bus_ops;
struct mv88e6xxx_irq_ops;
struct mv88e6xxx_gpio_ops;
struct mv88e6xxx_avb_ops;
+struct mv88e6xxx_ptp_ops;
struct mv88e6xxx_irq {
u16 masked;
@@ -273,6 +274,7 @@ struct mv88e6xxx_chip {
struct ptp_pin_desc pin_config[MV88E6XXX_MAX_GPIO];
u16 trig_config;
u16 evcap_config;
+ u16 enable_count;
/* Per-port timestamping resources. */
struct mv88e6xxx_port_hwtstamp port_hwtstamp[DSA_MAX_PORTS];
@@ -439,6 +441,9 @@ struct mv88e6xxx_ops {
/* Remote Management Unit operations */
int (*rmu_disable)(struct mv88e6xxx_chip *chip);
+
+ /* Precision Time Protocol operations */
+ const struct mv88e6xxx_ptp_ops *ptp_ops;
};
struct mv88e6xxx_irq_ops {
@@ -486,6 +491,24 @@ struct mv88e6xxx_avb_ops {
int (*tai_write)(struct mv88e6xxx_chip *chip, int addr, u16 data);
};
+struct mv88e6xxx_ptp_ops {
+ u64 (*clock_read)(const struct cyclecounter *cc);
+ int (*ptp_enable)(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on);
+ int (*ptp_verify)(struct ptp_clock_info *ptp, unsigned int pin,
+ enum ptp_pin_function func, unsigned int chan);
+ void (*event_work)(struct work_struct *ugly);
+ int (*port_enable)(struct mv88e6xxx_chip *chip, int port);
+ int (*port_disable)(struct mv88e6xxx_chip *chip, int port);
+ int (*global_enable)(struct mv88e6xxx_chip *chip);
+ int (*global_disable)(struct mv88e6xxx_chip *chip);
+ int n_ext_ts;
+ int arr0_sts_reg;
+ int arr1_sts_reg;
+ int dep_sts_reg;
+ u32 rx_filters;
+};
+
#define STATS_TYPE_PORT BIT(0)
#define STATS_TYPE_BANK0 BIT(1)
#define STATS_TYPE_BANK1 BIT(2)
diff --git a/drivers/net/dsa/mv88e6xxx/global2.h b/drivers/net/dsa/mv88e6xxx/global2.h
index 37e8ce2c72a0..194660d8c783 100644
--- a/drivers/net/dsa/mv88e6xxx/global2.h
+++ b/drivers/net/dsa/mv88e6xxx/global2.h
@@ -160,6 +160,7 @@
#define MV88E6390_G2_AVB_CMD_OP_WRITE 0x6000
#define MV88E6352_G2_AVB_CMD_PORT_MASK 0x0f00
#define MV88E6352_G2_AVB_CMD_PORT_TAIGLOBAL 0xe
+#define MV88E6165_G2_AVB_CMD_PORT_PTPGLOBAL 0xf
#define MV88E6352_G2_AVB_CMD_PORT_PTPGLOBAL 0xf
#define MV88E6390_G2_AVB_CMD_PORT_MASK 0x1f00
#define MV88E6390_G2_AVB_CMD_PORT_TAIGLOBAL 0x1e
@@ -335,6 +336,7 @@ int mv88e6xxx_g2_device_mapping_write(struct mv88e6xxx_chip *chip, int target,
extern const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops;
extern const struct mv88e6xxx_irq_ops mv88e6390_watchdog_ops;
+extern const struct mv88e6xxx_avb_ops mv88e6165_avb_ops;
extern const struct mv88e6xxx_avb_ops mv88e6352_avb_ops;
extern const struct mv88e6xxx_avb_ops mv88e6390_avb_ops;
@@ -484,6 +486,7 @@ static inline int mv88e6xxx_g2_pot_clear(struct mv88e6xxx_chip *chip)
static const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops = {};
static const struct mv88e6xxx_irq_ops mv88e6390_watchdog_ops = {};
+static const struct mv88e6xxx_avb_ops mv88e6165_avb_ops = {};
static const struct mv88e6xxx_avb_ops mv88e6352_avb_ops = {};
static const struct mv88e6xxx_avb_ops mv88e6390_avb_ops = {};
diff --git a/drivers/net/dsa/mv88e6xxx/global2_avb.c b/drivers/net/dsa/mv88e6xxx/global2_avb.c
index 2e398ccb88ca..672b503a67e1 100644
--- a/drivers/net/dsa/mv88e6xxx/global2_avb.c
+++ b/drivers/net/dsa/mv88e6xxx/global2_avb.c
@@ -130,6 +130,31 @@ const struct mv88e6xxx_avb_ops mv88e6352_avb_ops = {
.tai_write = mv88e6352_g2_avb_tai_write,
};
+static int mv88e6165_g2_avb_tai_read(struct mv88e6xxx_chip *chip, int addr,
+ u16 *data, int len)
+{
+ return mv88e6352_g2_avb_port_ptp_read(chip,
+ MV88E6165_G2_AVB_CMD_PORT_PTPGLOBAL,
+ addr, data, len);
+}
+
+static int mv88e6165_g2_avb_tai_write(struct mv88e6xxx_chip *chip, int addr,
+ u16 data)
+{
+ return mv88e6352_g2_avb_port_ptp_write(chip,
+ MV88E6165_G2_AVB_CMD_PORT_PTPGLOBAL,
+ addr, data);
+}
+
+const struct mv88e6xxx_avb_ops mv88e6165_avb_ops = {
+ .port_ptp_read = mv88e6352_g2_avb_port_ptp_read,
+ .port_ptp_write = mv88e6352_g2_avb_port_ptp_write,
+ .ptp_read = mv88e6352_g2_avb_ptp_read,
+ .ptp_write = mv88e6352_g2_avb_ptp_write,
+ .tai_read = mv88e6165_g2_avb_tai_read,
+ .tai_write = mv88e6165_g2_avb_tai_write,
+};
+
static int mv88e6390_g2_avb_port_ptp_read(struct mv88e6xxx_chip *chip,
int port, int addr, u16 *data,
int len)
diff --git a/drivers/net/dsa/mv88e6xxx/hwtstamp.c b/drivers/net/dsa/mv88e6xxx/hwtstamp.c
index a036c490b7ce..a17c16a2ab78 100644
--- a/drivers/net/dsa/mv88e6xxx/hwtstamp.c
+++ b/drivers/net/dsa/mv88e6xxx/hwtstamp.c
@@ -51,17 +51,30 @@ static int mv88e6xxx_ptp_write(struct mv88e6xxx_chip *chip, int addr,
return chip->info->ops->avb_ops->ptp_write(chip, addr, data);
}
+static int mv88e6xxx_ptp_read(struct mv88e6xxx_chip *chip, int addr,
+ u16 *data)
+{
+ if (!chip->info->ops->avb_ops->ptp_read)
+ return -EOPNOTSUPP;
+
+ return chip->info->ops->avb_ops->ptp_read(chip, addr, data, 1);
+}
+
/* TX_TSTAMP_TIMEOUT: This limits the time spent polling for a TX
* timestamp. When working properly, hardware will produce a timestamp
* within 1ms. Software may enounter delays due to MDIO contention, so
* the timeout is set accordingly.
*/
-#define TX_TSTAMP_TIMEOUT msecs_to_jiffies(20)
+#define TX_TSTAMP_TIMEOUT msecs_to_jiffies(40)
int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port,
struct ethtool_ts_info *info)
{
- struct mv88e6xxx_chip *chip = ds->priv;
+ const struct mv88e6xxx_ptp_ops *ptp_ops;
+ struct mv88e6xxx_chip *chip;
+
+ chip = ds->priv;
+ ptp_ops = chip->info->ops->ptp_ops;
if (!chip->info->ptp_support)
return -EOPNOTSUPP;
@@ -74,17 +87,7 @@ int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port,
info->tx_types =
(1 << HWTSTAMP_TX_OFF) |
(1 << HWTSTAMP_TX_ON);
- info->rx_filters =
- (1 << HWTSTAMP_FILTER_NONE) |
- (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
- (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
- (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
- (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
- (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
- (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
- (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
- (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
- (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ);
+ info->rx_filters = ptp_ops->rx_filters;
return 0;
}
@@ -92,10 +95,9 @@ int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port,
static int mv88e6xxx_set_hwtstamp_config(struct mv88e6xxx_chip *chip, int port,
struct hwtstamp_config *config)
{
+ const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops;
struct mv88e6xxx_port_hwtstamp *ps = &chip->port_hwtstamp[port];
bool tstamp_enable = false;
- u16 port_config0;
- int err;
/* Prevent the TX/RX paths from trying to interact with the
* timestamp hardware while we reconfigure it.
@@ -120,6 +122,14 @@ static int mv88e6xxx_set_hwtstamp_config(struct mv88e6xxx_chip *chip, int port,
/* The switch supports timestamping both L2 and L4; one cannot be
* disabled independently of the other.
*/
+
+ if (!(BIT(config->rx_filter) & ptp_ops->rx_filters)) {
+ config->rx_filter = HWTSTAMP_FILTER_NONE;
+ dev_dbg(chip->dev, "Unsupported rx_filter %d\n",
+ config->rx_filter);
+ return -ERANGE;
+ }
+
switch (config->rx_filter) {
case HWTSTAMP_FILTER_NONE:
tstamp_enable = false;
@@ -141,24 +151,22 @@ static int mv88e6xxx_set_hwtstamp_config(struct mv88e6xxx_chip *chip, int port,
return -ERANGE;
}
+ mutex_lock(&chip->reg_lock);
if (tstamp_enable) {
- /* Disable transportSpecific value matching, so that packets
- * with either 1588 (0) and 802.1AS (1) will be timestamped.
- */
- port_config0 = MV88E6XXX_PORT_PTP_CFG0_DISABLE_TSPEC_MATCH;
+ chip->enable_count += 1;
+ if (chip->enable_count == 1 && ptp_ops->global_enable)
+ ptp_ops->global_enable(chip);
+ if (ptp_ops->port_enable)
+ ptp_ops->port_enable(chip, port);
} else {
- /* Disable PTP. This disables both RX and TX timestamping. */
- port_config0 = MV88E6XXX_PORT_PTP_CFG0_DISABLE_PTP;
+ if (ptp_ops->port_disable)
+ ptp_ops->port_disable(chip, port);
+ chip->enable_count -= 1;
+ if (chip->enable_count == 0 && ptp_ops->global_disable)
+ ptp_ops->global_disable(chip);
}
-
- mutex_lock(&chip->reg_lock);
- err = mv88e6xxx_port_ptp_write(chip, port, MV88E6XXX_PORT_PTP_CFG0,
- port_config0);
mutex_unlock(&chip->reg_lock);
- if (err < 0)
- return err;
-
/* Once hardware has been configured, enable timestamp checks
* in the RX/TX paths.
*/
@@ -338,17 +346,18 @@ static void mv88e6xxx_get_rxts(struct mv88e6xxx_chip *chip,
static void mv88e6xxx_rxtstamp_work(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_port_hwtstamp *ps)
{
+ const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops;
struct sk_buff *skb;
skb = skb_dequeue(&ps->rx_queue);
if (skb)
- mv88e6xxx_get_rxts(chip, ps, skb, MV88E6XXX_PORT_PTP_ARR0_STS,
+ mv88e6xxx_get_rxts(chip, ps, skb, ptp_ops->arr0_sts_reg,
&ps->rx_queue);
skb = skb_dequeue(&ps->rx_queue2);
if (skb)
- mv88e6xxx_get_rxts(chip, ps, skb, MV88E6XXX_PORT_PTP_ARR1_STS,
+ mv88e6xxx_get_rxts(chip, ps, skb, ptp_ops->arr1_sts_reg,
&ps->rx_queue2);
}
@@ -389,6 +398,7 @@ bool mv88e6xxx_port_rxtstamp(struct dsa_switch *ds, int port,
static int mv88e6xxx_txtstamp_work(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_port_hwtstamp *ps)
{
+ const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops;
struct skb_shared_hwtstamps shhwtstamps;
u16 departure_block[4], status;
struct sk_buff *tmp_skb;
@@ -401,7 +411,7 @@ static int mv88e6xxx_txtstamp_work(struct mv88e6xxx_chip *chip,
mutex_lock(&chip->reg_lock);
err = mv88e6xxx_port_ptp_read(chip, ps->port_id,
- MV88E6XXX_PORT_PTP_DEP_STS,
+ ptp_ops->dep_sts_reg,
departure_block,
ARRAY_SIZE(departure_block));
mutex_unlock(&chip->reg_lock);
@@ -425,8 +435,7 @@ static int mv88e6xxx_txtstamp_work(struct mv88e6xxx_chip *chip,
/* We have the timestamp; go ahead and clear valid now */
mutex_lock(&chip->reg_lock);
- mv88e6xxx_port_ptp_write(chip, ps->port_id,
- MV88E6XXX_PORT_PTP_DEP_STS, 0);
+ mv88e6xxx_port_ptp_write(chip, ps->port_id, ptp_ops->dep_sts_reg, 0);
mutex_unlock(&chip->reg_lock);
status = departure_block[0] & MV88E6XXX_PTP_TS_STATUS_MASK;
@@ -522,8 +531,48 @@ bool mv88e6xxx_port_txtstamp(struct dsa_switch *ds, int port,
return true;
}
+int mv88e6165_global_disable(struct mv88e6xxx_chip *chip)
+{
+ u16 val;
+ int err;
+
+ err = mv88e6xxx_ptp_read(chip, MV88E6165_PTP_CFG, &val);
+ if (err)
+ return err;
+ val |= MV88E6165_PTP_CFG_DISABLE_PTP;
+
+ return mv88e6xxx_ptp_write(chip, MV88E6165_PTP_CFG, val);
+}
+
+int mv88e6165_global_enable(struct mv88e6xxx_chip *chip)
+{
+ u16 val;
+ int err;
+
+ err = mv88e6xxx_ptp_read(chip, MV88E6165_PTP_CFG, &val);
+ if (err)
+ return err;
+
+ val &= ~(MV88E6165_PTP_CFG_DISABLE_PTP | MV88E6165_PTP_CFG_TSPEC_MASK);
+
+ return mv88e6xxx_ptp_write(chip, MV88E6165_PTP_CFG, val);
+}
+
+int mv88e6352_hwtstamp_port_disable(struct mv88e6xxx_chip *chip, int port)
+{
+ return mv88e6xxx_port_ptp_write(chip, port, MV88E6XXX_PORT_PTP_CFG0,
+ MV88E6XXX_PORT_PTP_CFG0_DISABLE_PTP);
+}
+
+int mv88e6352_hwtstamp_port_enable(struct mv88e6xxx_chip *chip, int port)
+{
+ return mv88e6xxx_port_ptp_write(chip, port, MV88E6XXX_PORT_PTP_CFG0,
+ MV88E6XXX_PORT_PTP_CFG0_DISABLE_TSPEC_MATCH);
+}
+
static int mv88e6xxx_hwtstamp_port_setup(struct mv88e6xxx_chip *chip, int port)
{
+ const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops;
struct mv88e6xxx_port_hwtstamp *ps = &chip->port_hwtstamp[port];
ps->port_id = port;
@@ -531,12 +580,15 @@ static int mv88e6xxx_hwtstamp_port_setup(struct mv88e6xxx_chip *chip, int port)
skb_queue_head_init(&ps->rx_queue);
skb_queue_head_init(&ps->rx_queue2);
- return mv88e6xxx_port_ptp_write(chip, port, MV88E6XXX_PORT_PTP_CFG0,
- MV88E6XXX_PORT_PTP_CFG0_DISABLE_PTP);
+ if (ptp_ops->port_disable)
+ return ptp_ops->port_disable(chip, port);
+
+ return 0;
}
int mv88e6xxx_hwtstamp_setup(struct mv88e6xxx_chip *chip)
{
+ const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops;
int err;
int i;
@@ -547,6 +599,18 @@ int mv88e6xxx_hwtstamp_setup(struct mv88e6xxx_chip *chip)
return err;
}
+ /* Disable PTP globally */
+ if (ptp_ops->global_disable) {
+ err = ptp_ops->global_disable(chip);
+ if (err)
+ return err;
+ }
+
+ /* Set the ethertype of L2 PTP messages */
+ err = mv88e6xxx_ptp_write(chip, MV88E6XXX_PTP_GC_ETYPE, ETH_P_1588);
+ if (err)
+ return err;
+
/* MV88E6XXX_PTP_MSG_TYPE is a mask of PTP message types to
* timestamp. This affects all ports that have timestamping enabled,
* but the timestamp config is per-port; thus we configure all events
diff --git a/drivers/net/dsa/mv88e6xxx/hwtstamp.h b/drivers/net/dsa/mv88e6xxx/hwtstamp.h
index bc71c9212a08..b9a72661bcc4 100644
--- a/drivers/net/dsa/mv88e6xxx/hwtstamp.h
+++ b/drivers/net/dsa/mv88e6xxx/hwtstamp.h
@@ -19,7 +19,7 @@
#include "chip.h"
-/* Global PTP registers */
+/* Global 6352 PTP registers */
/* Offset 0x00: PTP EtherType */
#define MV88E6XXX_PTP_ETHERTYPE 0x00
@@ -34,6 +34,12 @@
/* Offset 0x02: Timestamp Arrival Capture Pointers */
#define MV88E6XXX_PTP_TS_ARRIVAL_PTR 0x02
+/* Offset 0x05: PTP Global Configuration */
+#define MV88E6165_PTP_CFG 0x05
+#define MV88E6165_PTP_CFG_TSPEC_MASK 0xf000
+#define MV88E6165_PTP_CFG_DISABLE_TS_OVERWRITE BIT(1)
+#define MV88E6165_PTP_CFG_DISABLE_PTP BIT(0)
+
/* Offset 0x07: PTP Global Configuration */
#define MV88E6341_PTP_CFG 0x07
#define MV88E6341_PTP_CFG_UPDATE 0x8000
@@ -46,7 +52,7 @@
/* Offset 0x08: PTP Interrupt Status */
#define MV88E6XXX_PTP_IRQ_STATUS 0x08
-/* Per-Port PTP Registers */
+/* Per-Port 6352 PTP Registers */
/* Offset 0x00: PTP Configuration 0 */
#define MV88E6XXX_PORT_PTP_CFG0 0x00
#define MV88E6XXX_PORT_PTP_CFG0_TSPEC_SHIFT 12
@@ -123,6 +129,10 @@ int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port,
int mv88e6xxx_hwtstamp_setup(struct mv88e6xxx_chip *chip);
void mv88e6xxx_hwtstamp_free(struct mv88e6xxx_chip *chip);
+int mv88e6352_hwtstamp_port_enable(struct mv88e6xxx_chip *chip, int port);
+int mv88e6352_hwtstamp_port_disable(struct mv88e6xxx_chip *chip, int port);
+int mv88e6165_global_enable(struct mv88e6xxx_chip *chip);
+int mv88e6165_global_disable(struct mv88e6xxx_chip *chip);
#else /* !CONFIG_NET_DSA_MV88E6XXX_PTP */
diff --git a/drivers/net/dsa/mv88e6xxx/ptp.c b/drivers/net/dsa/mv88e6xxx/ptp.c
index bd85e2c390e1..4b336d8d4c67 100644
--- a/drivers/net/dsa/mv88e6xxx/ptp.c
+++ b/drivers/net/dsa/mv88e6xxx/ptp.c
@@ -16,6 +16,7 @@
#include "chip.h"
#include "global2.h"
+#include "hwtstamp.h"
#include "ptp.h"
/* Raw timestamps are in units of 8-ns clock periods. */
@@ -50,7 +51,7 @@ static int mv88e6xxx_tai_write(struct mv88e6xxx_chip *chip, int addr, u16 data)
}
/* TODO: places where this are called should be using pinctrl */
-static int mv88e6xxx_set_gpio_func(struct mv88e6xxx_chip *chip, int pin,
+static int mv88e6352_set_gpio_func(struct mv88e6xxx_chip *chip, int pin,
int func, int input)
{
int err;
@@ -65,7 +66,7 @@ static int mv88e6xxx_set_gpio_func(struct mv88e6xxx_chip *chip, int pin,
return chip->info->ops->gpio_ops->set_pctl(chip, pin, func);
}
-static u64 mv88e6xxx_ptp_clock_read(const struct cyclecounter *cc)
+static u64 mv88e6352_ptp_clock_read(const struct cyclecounter *cc)
{
struct mv88e6xxx_chip *chip = cc_to_chip(cc);
u16 phc_time[2];
@@ -79,13 +80,27 @@ static u64 mv88e6xxx_ptp_clock_read(const struct cyclecounter *cc)
return ((u32)phc_time[1] << 16) | phc_time[0];
}
-/* mv88e6xxx_config_eventcap - configure TAI event capture
+static u64 mv88e6165_ptp_clock_read(const struct cyclecounter *cc)
+{
+ struct mv88e6xxx_chip *chip = cc_to_chip(cc);
+ u16 phc_time[2];
+ int err;
+
+ err = mv88e6xxx_tai_read(chip, MV88E6XXX_PTP_GC_TIME_LO, phc_time,
+ ARRAY_SIZE(phc_time));
+ if (err)
+ return 0;
+ else
+ return ((u32)phc_time[1] << 16) | phc_time[0];
+}
+
+/* mv88e6352_config_eventcap - configure TAI event capture
* @event: PTP_CLOCK_PPS (internal) or PTP_CLOCK_EXTTS (external)
* @rising: zero for falling-edge trigger, else rising-edge trigger
*
* This will also reset the capture sequence counter.
*/
-static int mv88e6xxx_config_eventcap(struct mv88e6xxx_chip *chip, int event,
+static int mv88e6352_config_eventcap(struct mv88e6xxx_chip *chip, int event,
int rising)
{
u16 global_config;
@@ -118,7 +133,7 @@ static int mv88e6xxx_config_eventcap(struct mv88e6xxx_chip *chip, int event,
return err;
}
-static void mv88e6xxx_tai_event_work(struct work_struct *ugly)
+static void mv88e6352_tai_event_work(struct work_struct *ugly)
{
struct delayed_work *dw = to_delayed_work(ugly);
struct mv88e6xxx_chip *chip = dw_tai_event_to_chip(dw);
@@ -232,7 +247,7 @@ static int mv88e6xxx_ptp_settime(struct ptp_clock_info *ptp,
return 0;
}
-static int mv88e6xxx_ptp_enable_extts(struct mv88e6xxx_chip *chip,
+static int mv88e6352_ptp_enable_extts(struct mv88e6xxx_chip *chip,
struct ptp_clock_request *rq, int on)
{
int rising = (rq->extts.flags & PTP_RISING_EDGE);
@@ -250,18 +265,18 @@ static int mv88e6xxx_ptp_enable_extts(struct mv88e6xxx_chip *chip,
if (on) {
func = MV88E6352_G2_SCRATCH_GPIO_PCTL_EVREQ;
- err = mv88e6xxx_set_gpio_func(chip, pin, func, true);
+ err = mv88e6352_set_gpio_func(chip, pin, func, true);
if (err)
goto out;
schedule_delayed_work(&chip->tai_event_work,
TAI_EVENT_WORK_INTERVAL);
- err = mv88e6xxx_config_eventcap(chip, PTP_CLOCK_EXTTS, rising);
+ err = mv88e6352_config_eventcap(chip, PTP_CLOCK_EXTTS, rising);
} else {
func = MV88E6352_G2_SCRATCH_GPIO_PCTL_GPIO;
- err = mv88e6xxx_set_gpio_func(chip, pin, func, true);
+ err = mv88e6352_set_gpio_func(chip, pin, func, true);
cancel_delayed_work_sync(&chip->tai_event_work);
}
@@ -272,20 +287,20 @@ out:
return err;
}
-static int mv88e6xxx_ptp_enable(struct ptp_clock_info *ptp,
+static int mv88e6352_ptp_enable(struct ptp_clock_info *ptp,
struct ptp_clock_request *rq, int on)
{
struct mv88e6xxx_chip *chip = ptp_to_chip(ptp);
switch (rq->type) {
case PTP_CLK_REQ_EXTTS:
- return mv88e6xxx_ptp_enable_extts(chip, rq, on);
+ return mv88e6352_ptp_enable_extts(chip, rq, on);
default:
return -EOPNOTSUPP;
}
}
-static int mv88e6xxx_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
+static int mv88e6352_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
enum ptp_pin_function func, unsigned int chan)
{
switch (func) {
@@ -299,6 +314,55 @@ static int mv88e6xxx_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
return 0;
}
+const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops = {
+ .clock_read = mv88e6352_ptp_clock_read,
+ .ptp_enable = mv88e6352_ptp_enable,
+ .ptp_verify = mv88e6352_ptp_verify,
+ .event_work = mv88e6352_tai_event_work,
+ .port_enable = mv88e6352_hwtstamp_port_enable,
+ .port_disable = mv88e6352_hwtstamp_port_disable,
+ .n_ext_ts = 1,
+ .arr0_sts_reg = MV88E6XXX_PORT_PTP_ARR0_STS,
+ .arr1_sts_reg = MV88E6XXX_PORT_PTP_ARR1_STS,
+ .dep_sts_reg = MV88E6XXX_PORT_PTP_DEP_STS,
+ .rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ),
+};
+
+const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops = {
+ .clock_read = mv88e6165_ptp_clock_read,
+ .global_enable = mv88e6165_global_enable,
+ .global_disable = mv88e6165_global_disable,
+ .arr0_sts_reg = MV88E6165_PORT_PTP_ARR0_STS,
+ .arr1_sts_reg = MV88E6165_PORT_PTP_ARR1_STS,
+ .dep_sts_reg = MV88E6165_PORT_PTP_DEP_STS,
+ .rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ),
+};
+
+static u64 mv88e6xxx_ptp_clock_read(const struct cyclecounter *cc)
+{
+ struct mv88e6xxx_chip *chip = cc_to_chip(cc);
+
+ if (chip->info->ops->ptp_ops->clock_read)
+ return chip->info->ops->ptp_ops->clock_read(cc);
+
+ return 0;
+}
+
/* With a 125MHz input clock, the 32-bit timestamp counter overflows in ~34.3
* seconds; this task forces periodic reads so that we don't miss any.
*/
@@ -317,6 +381,7 @@ static void mv88e6xxx_ptp_overflow_check(struct work_struct *work)
int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip)
{
+ const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops;
int i;
/* Set up the cycle counter */
@@ -330,14 +395,15 @@ int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip)
ktime_to_ns(ktime_get_real()));
INIT_DELAYED_WORK(&chip->overflow_work, mv88e6xxx_ptp_overflow_check);
- INIT_DELAYED_WORK(&chip->tai_event_work, mv88e6xxx_tai_event_work);
+ if (ptp_ops->event_work)
+ INIT_DELAYED_WORK(&chip->tai_event_work, ptp_ops->event_work);
chip->ptp_clock_info.owner = THIS_MODULE;
snprintf(chip->ptp_clock_info.name, sizeof(chip->ptp_clock_info.name),
dev_name(chip->dev));
chip->ptp_clock_info.max_adj = 1000000;
- chip->ptp_clock_info.n_ext_ts = 1;
+ chip->ptp_clock_info.n_ext_ts = ptp_ops->n_ext_ts;
chip->ptp_clock_info.n_per_out = 0;
chip->ptp_clock_info.n_pins = mv88e6xxx_num_gpio(chip);
chip->ptp_clock_info.pps = 0;
@@ -355,8 +421,8 @@ int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip)
chip->ptp_clock_info.adjtime = mv88e6xxx_ptp_adjtime;
chip->ptp_clock_info.gettime64 = mv88e6xxx_ptp_gettime;
chip->ptp_clock_info.settime64 = mv88e6xxx_ptp_settime;
- chip->ptp_clock_info.enable = mv88e6xxx_ptp_enable;
- chip->ptp_clock_info.verify = mv88e6xxx_ptp_verify;
+ chip->ptp_clock_info.enable = ptp_ops->ptp_enable;
+ chip->ptp_clock_info.verify = ptp_ops->ptp_verify;
chip->ptp_clock_info.do_aux_work = mv88e6xxx_hwtstamp_work;
chip->ptp_clock = ptp_clock_register(&chip->ptp_clock_info, chip->dev);
@@ -373,7 +439,8 @@ void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip)
{
if (chip->ptp_clock) {
cancel_delayed_work_sync(&chip->overflow_work);
- cancel_delayed_work_sync(&chip->tai_event_work);
+ if (chip->info->ops->ptp_ops->event_work)
+ cancel_delayed_work_sync(&chip->tai_event_work);
ptp_clock_unregister(chip->ptp_clock);
chip->ptp_clock = NULL;
diff --git a/drivers/net/dsa/mv88e6xxx/ptp.h b/drivers/net/dsa/mv88e6xxx/ptp.h
index 10f271ab650d..28a030840517 100644
--- a/drivers/net/dsa/mv88e6xxx/ptp.h
+++ b/drivers/net/dsa/mv88e6xxx/ptp.h
@@ -78,6 +78,71 @@
/* Offset 0x12: Lock Status */
#define MV88E6XXX_TAI_LOCK_STATUS 0x12
+/* Offset 0x00: Ether Type */
+#define MV88E6XXX_PTP_GC_ETYPE 0x00
+
+/* 6165 Global Control Registers */
+/* Offset 0x00: Ether Type */
+#define MV88E6XXX_PTP_GC_ETYPE 0x00
+
+/* Offset 0x01: Message ID */
+#define MV88E6XXX_PTP_GC_MESSAGE_ID 0x01
+
+/* Offset 0x02: Time Stamp Arrive Time */
+#define MV88E6XXX_PTP_GC_TS_ARR_PTR 0x02
+
+/* Offset 0x03: Port Arrival Interrupt Enable */
+#define MV88E6XXX_PTP_GC_PORT_ARR_INT_EN 0x03
+
+/* Offset 0x04: Port Departure Interrupt Enable */
+#define MV88E6XXX_PTP_GC_PORT_DEP_INT_EN 0x04
+
+/* Offset 0x05: Configuration */
+#define MV88E6XXX_PTP_GC_CONFIG 0x05
+#define MV88E6XXX_PTP_GC_CONFIG_DIS_OVERWRITE BIT(1)
+#define MV88E6XXX_PTP_GC_CONFIG_DIS_TS BIT(0)
+
+/* Offset 0x8: Interrupt Status */
+#define MV88E6XXX_PTP_GC_INT_STATUS 0x08
+
+/* Offset 0x9/0xa: Global Time */
+#define MV88E6XXX_PTP_GC_TIME_LO 0x09
+#define MV88E6XXX_PTP_GC_TIME_HI 0x0A
+
+/* 6165 Per Port Registers */
+/* Offset 0: Arrival Time 0 Status */
+#define MV88E6165_PORT_PTP_ARR0_STS 0x00
+
+/* Offset 0x01/0x02: PTP Arrival 0 Time */
+#define MV88E6165_PORT_PTP_ARR0_TIME_LO 0x01
+#define MV88E6165_PORT_PTP_ARR0_TIME_HI 0x02
+
+/* Offset 0x03: PTP Arrival 0 Sequence ID */
+#define MV88E6165_PORT_PTP_ARR0_SEQID 0x03
+
+/* Offset 0x04: PTP Arrival 1 Status */
+#define MV88E6165_PORT_PTP_ARR1_STS 0x04
+
+/* Offset 0x05/0x6E: PTP Arrival 1 Time */
+#define MV88E6165_PORT_PTP_ARR1_TIME_LO 0x05
+#define MV88E6165_PORT_PTP_ARR1_TIME_HI 0x06
+
+/* Offset 0x07: PTP Arrival 1 Sequence ID */
+#define MV88E6165_PORT_PTP_ARR1_SEQID 0x07
+
+/* Offset 0x08: PTP Departure Status */
+#define MV88E6165_PORT_PTP_DEP_STS 0x08
+
+/* Offset 0x09/0x0a: PTP Deperture Time */
+#define MV88E6165_PORT_PTP_DEP_TIME_LO 0x09
+#define MV88E6165_PORT_PTP_DEP_TIME_HI 0x0a
+
+/* Offset 0x0b: PTP Departure Sequence ID */
+#define MV88E6165_PORT_PTP_DEP_SEQID 0x0b
+
+/* Offset 0x0d: Port Status */
+#define MV88E6164_PORT_STATUS 0x0d
+
#ifdef CONFIG_NET_DSA_MV88E6XXX_PTP
long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp);
@@ -87,6 +152,9 @@ void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip);
#define ptp_to_chip(ptp) container_of(ptp, struct mv88e6xxx_chip, \
ptp_clock_info)
+extern const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops;
+extern const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops;
+
#else /* !CONFIG_NET_DSA_MV88E6XXX_PTP */
static inline long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp)
@@ -103,6 +171,9 @@ static inline void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip)
{
}
+static const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops = {};
+static const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops = {};
+
#endif /* CONFIG_NET_DSA_MV88E6XXX_PTP */
#endif /* _MV88E6XXX_PTP_H */
diff --git a/drivers/net/dsa/realtek-smi.c b/drivers/net/dsa/realtek-smi.c
new file mode 100644
index 000000000000..b4b839a1d095
--- /dev/null
+++ b/drivers/net/dsa/realtek-smi.c
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Realtek Simple Management Interface (SMI) driver
+ * It can be discussed how "simple" this interface is.
+ *
+ * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels
+ * but the protocol is not MDIO at all. Instead it is a Realtek
+ * pecularity that need to bit-bang the lines in a special way to
+ * communicate with the switch.
+ *
+ * ASICs we intend to support with this driver:
+ *
+ * RTL8366 - The original version, apparently
+ * RTL8369 - Similar enough to have the same datsheet as RTL8366
+ * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
+ * different register layout from the other two
+ * RTL8366S - Is this "RTL8366 super"?
+ * RTL8367 - Has an OpenWRT driver as well
+ * RTL8368S - Seems to be an alternative name for RTL8366RB
+ * RTL8370 - Also uses SMI
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/if_bridge.h>
+
+#include "realtek-smi.h"
+
+#define REALTEK_SMI_ACK_RETRY_COUNT 5
+#define REALTEK_SMI_HW_STOP_DELAY 25 /* msecs */
+#define REALTEK_SMI_HW_START_DELAY 100 /* msecs */
+
+static inline void realtek_smi_clk_delay(struct realtek_smi *smi)
+{
+ ndelay(smi->clk_delay);
+}
+
+static void realtek_smi_start(struct realtek_smi *smi)
+{
+ /* Set GPIO pins to output mode, with initial state:
+ * SCK = 0, SDA = 1
+ */
+ gpiod_direction_output(smi->mdc, 0);
+ gpiod_direction_output(smi->mdio, 1);
+ realtek_smi_clk_delay(smi);
+
+ /* CLK 1: 0 -> 1, 1 -> 0 */
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ realtek_smi_clk_delay(smi);
+
+ /* CLK 2: */
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdio, 0);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdio, 1);
+}
+
+static void realtek_smi_stop(struct realtek_smi *smi)
+{
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdio, 0);
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdio, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 1);
+
+ /* Add a click */
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 1);
+
+ /* Set GPIO pins to input mode */
+ gpiod_direction_input(smi->mdio);
+ gpiod_direction_input(smi->mdc);
+}
+
+static void realtek_smi_write_bits(struct realtek_smi *smi, u32 data, u32 len)
+{
+ for (; len > 0; len--) {
+ realtek_smi_clk_delay(smi);
+
+ /* Prepare data */
+ gpiod_set_value(smi->mdio, !!(data & (1 << (len - 1))));
+ realtek_smi_clk_delay(smi);
+
+ /* Clocking */
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ }
+}
+
+static void realtek_smi_read_bits(struct realtek_smi *smi, u32 len, u32 *data)
+{
+ gpiod_direction_input(smi->mdio);
+
+ for (*data = 0; len > 0; len--) {
+ u32 u;
+
+ realtek_smi_clk_delay(smi);
+
+ /* Clocking */
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ u = !!gpiod_get_value(smi->mdio);
+ gpiod_set_value(smi->mdc, 0);
+
+ *data |= (u << (len - 1));
+ }
+
+ gpiod_direction_output(smi->mdio, 0);
+}
+
+static int realtek_smi_wait_for_ack(struct realtek_smi *smi)
+{
+ int retry_cnt;
+
+ retry_cnt = 0;
+ do {
+ u32 ack;
+
+ realtek_smi_read_bits(smi, 1, &ack);
+ if (ack == 0)
+ break;
+
+ if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) {
+ dev_err(smi->dev, "ACK timeout\n");
+ return -ETIMEDOUT;
+ }
+ } while (1);
+
+ return 0;
+}
+
+static int realtek_smi_write_byte(struct realtek_smi *smi, u8 data)
+{
+ realtek_smi_write_bits(smi, data, 8);
+ return realtek_smi_wait_for_ack(smi);
+}
+
+static int realtek_smi_write_byte_noack(struct realtek_smi *smi, u8 data)
+{
+ realtek_smi_write_bits(smi, data, 8);
+ return 0;
+}
+
+static int realtek_smi_read_byte0(struct realtek_smi *smi, u8 *data)
+{
+ u32 t;
+
+ /* Read data */
+ realtek_smi_read_bits(smi, 8, &t);
+ *data = (t & 0xff);
+
+ /* Send an ACK */
+ realtek_smi_write_bits(smi, 0x00, 1);
+
+ return 0;
+}
+
+static int realtek_smi_read_byte1(struct realtek_smi *smi, u8 *data)
+{
+ u32 t;
+
+ /* Read data */
+ realtek_smi_read_bits(smi, 8, &t);
+ *data = (t & 0xff);
+
+ /* Send an ACK */
+ realtek_smi_write_bits(smi, 0x01, 1);
+
+ return 0;
+}
+
+static int realtek_smi_read_reg(struct realtek_smi *smi, u32 addr, u32 *data)
+{
+ unsigned long flags;
+ u8 lo = 0;
+ u8 hi = 0;
+ int ret;
+
+ spin_lock_irqsave(&smi->lock, flags);
+
+ realtek_smi_start(smi);
+
+ /* Send READ command */
+ ret = realtek_smi_write_byte(smi, smi->cmd_read);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[7:0] */
+ ret = realtek_smi_write_byte(smi, addr & 0xff);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[15:8] */
+ ret = realtek_smi_write_byte(smi, addr >> 8);
+ if (ret)
+ goto out;
+
+ /* Read DATA[7:0] */
+ realtek_smi_read_byte0(smi, &lo);
+ /* Read DATA[15:8] */
+ realtek_smi_read_byte1(smi, &hi);
+
+ *data = ((u32)lo) | (((u32)hi) << 8);
+
+ ret = 0;
+
+ out:
+ realtek_smi_stop(smi);
+ spin_unlock_irqrestore(&smi->lock, flags);
+
+ return ret;
+}
+
+static int realtek_smi_write_reg(struct realtek_smi *smi,
+ u32 addr, u32 data, bool ack)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&smi->lock, flags);
+
+ realtek_smi_start(smi);
+
+ /* Send WRITE command */
+ ret = realtek_smi_write_byte(smi, smi->cmd_write);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[7:0] */
+ ret = realtek_smi_write_byte(smi, addr & 0xff);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[15:8] */
+ ret = realtek_smi_write_byte(smi, addr >> 8);
+ if (ret)
+ goto out;
+
+ /* Write DATA[7:0] */
+ ret = realtek_smi_write_byte(smi, data & 0xff);
+ if (ret)
+ goto out;
+
+ /* Write DATA[15:8] */
+ if (ack)
+ ret = realtek_smi_write_byte(smi, data >> 8);
+ else
+ ret = realtek_smi_write_byte_noack(smi, data >> 8);
+ if (ret)
+ goto out;
+
+ ret = 0;
+
+ out:
+ realtek_smi_stop(smi);
+ spin_unlock_irqrestore(&smi->lock, flags);
+
+ return ret;
+}
+
+/* There is one single case when we need to use this accessor and that
+ * is when issueing soft reset. Since the device reset as soon as we write
+ * that bit, no ACK will come back for natural reasons.
+ */
+int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
+ u32 data)
+{
+ return realtek_smi_write_reg(smi, addr, data, false);
+}
+EXPORT_SYMBOL_GPL(realtek_smi_write_reg_noack);
+
+/* Regmap accessors */
+
+static int realtek_smi_write(void *ctx, u32 reg, u32 val)
+{
+ struct realtek_smi *smi = ctx;
+
+ return realtek_smi_write_reg(smi, reg, val, true);
+}
+
+static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
+{
+ struct realtek_smi *smi = ctx;
+
+ return realtek_smi_read_reg(smi, reg, val);
+}
+
+static const struct regmap_config realtek_smi_mdio_regmap_config = {
+ .reg_bits = 10, /* A4..A0 R4..R0 */
+ .val_bits = 16,
+ .reg_stride = 1,
+ /* PHY regs are at 0x8000 */
+ .max_register = 0xffff,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .reg_read = realtek_smi_read,
+ .reg_write = realtek_smi_write,
+ .cache_type = REGCACHE_NONE,
+};
+
+static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct realtek_smi *smi = bus->priv;
+
+ return smi->ops->phy_read(smi, addr, regnum);
+}
+
+static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ struct realtek_smi *smi = bus->priv;
+
+ return smi->ops->phy_write(smi, addr, regnum, val);
+}
+
+int realtek_smi_setup_mdio(struct realtek_smi *smi)
+{
+ struct device_node *mdio_np;
+ int ret;
+
+ mdio_np = of_find_compatible_node(smi->dev->of_node, NULL,
+ "realtek,smi-mdio");
+ if (!mdio_np) {
+ dev_err(smi->dev, "no MDIO bus node\n");
+ return -ENODEV;
+ }
+
+ smi->slave_mii_bus = devm_mdiobus_alloc(smi->dev);
+ if (!smi->slave_mii_bus)
+ return -ENOMEM;
+ smi->slave_mii_bus->priv = smi;
+ smi->slave_mii_bus->name = "SMI slave MII";
+ smi->slave_mii_bus->read = realtek_smi_mdio_read;
+ smi->slave_mii_bus->write = realtek_smi_mdio_write;
+ snprintf(smi->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
+ smi->ds->index);
+ smi->slave_mii_bus->dev.of_node = mdio_np;
+ smi->slave_mii_bus->parent = smi->dev;
+ smi->ds->slave_mii_bus = smi->slave_mii_bus;
+
+ ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np);
+ if (ret) {
+ dev_err(smi->dev, "unable to register MDIO bus %s\n",
+ smi->slave_mii_bus->id);
+ of_node_put(mdio_np);
+ }
+
+ return 0;
+}
+
+static int realtek_smi_probe(struct platform_device *pdev)
+{
+ const struct realtek_smi_variant *var;
+ struct device *dev = &pdev->dev;
+ struct realtek_smi *smi;
+ struct device_node *np;
+ int ret;
+
+ var = of_device_get_match_data(dev);
+ np = dev->of_node;
+
+ smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL);
+ if (!smi)
+ return -ENOMEM;
+ smi->map = devm_regmap_init(dev, NULL, smi,
+ &realtek_smi_mdio_regmap_config);
+ if (IS_ERR(smi->map)) {
+ ret = PTR_ERR(smi->map);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Link forward and backward */
+ smi->dev = dev;
+ smi->clk_delay = var->clk_delay;
+ smi->cmd_read = var->cmd_read;
+ smi->cmd_write = var->cmd_write;
+ smi->ops = var->ops;
+
+ dev_set_drvdata(dev, smi);
+ spin_lock_init(&smi->lock);
+
+ /* TODO: if power is software controlled, set up any regulators here */
+
+ /* Assert then deassert RESET */
+ smi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(smi->reset)) {
+ dev_err(dev, "failed to get RESET GPIO\n");
+ return PTR_ERR(smi->reset);
+ }
+ msleep(REALTEK_SMI_HW_STOP_DELAY);
+ gpiod_set_value(smi->reset, 0);
+ msleep(REALTEK_SMI_HW_START_DELAY);
+ dev_info(dev, "deasserted RESET\n");
+
+ /* Fetch MDIO pins */
+ smi->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
+ if (IS_ERR(smi->mdc))
+ return PTR_ERR(smi->mdc);
+ smi->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
+ if (IS_ERR(smi->mdio))
+ return PTR_ERR(smi->mdio);
+
+ smi->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+ ret = smi->ops->detect(smi);
+ if (ret) {
+ dev_err(dev, "unable to detect switch\n");
+ return ret;
+ }
+
+ smi->ds = dsa_switch_alloc(dev, smi->num_ports);
+ if (!smi->ds)
+ return -ENOMEM;
+ smi->ds->priv = smi;
+
+ smi->ds->ops = var->ds_ops;
+ ret = dsa_register_switch(smi->ds);
+ if (ret) {
+ dev_err(dev, "unable to register switch ret = %d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int realtek_smi_remove(struct platform_device *pdev)
+{
+ struct realtek_smi *smi = dev_get_drvdata(&pdev->dev);
+
+ dsa_unregister_switch(smi->ds);
+ gpiod_set_value(smi->reset, 1);
+
+ return 0;
+}
+
+static const struct of_device_id realtek_smi_of_match[] = {
+ {
+ .compatible = "realtek,rtl8366rb",
+ .data = &rtl8366rb_variant,
+ },
+ {
+ /* FIXME: add support for RTL8366S and more */
+ .compatible = "realtek,rtl8366s",
+ .data = NULL,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_smi_of_match);
+
+static struct platform_driver realtek_smi_driver = {
+ .driver = {
+ .name = "realtek-smi",
+ .of_match_table = of_match_ptr(realtek_smi_of_match),
+ },
+ .probe = realtek_smi_probe,
+ .remove = realtek_smi_remove,
+};
+module_platform_driver(realtek_smi_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/realtek-smi.h b/drivers/net/dsa/realtek-smi.h
new file mode 100644
index 000000000000..9a63b51e1d82
--- /dev/null
+++ b/drivers/net/dsa/realtek-smi.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Realtek SMI interface driver defines
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#ifndef _REALTEK_SMI_H
+#define _REALTEK_SMI_H
+
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <net/dsa.h>
+
+struct realtek_smi_ops;
+struct dentry;
+struct inode;
+struct file;
+
+struct rtl8366_mib_counter {
+ unsigned int base;
+ unsigned int offset;
+ unsigned int length;
+ const char *name;
+};
+
+struct rtl8366_vlan_mc {
+ u16 vid;
+ u16 untag;
+ u16 member;
+ u8 fid;
+ u8 priority;
+};
+
+struct rtl8366_vlan_4k {
+ u16 vid;
+ u16 untag;
+ u16 member;
+ u8 fid;
+};
+
+struct realtek_smi {
+ struct device *dev;
+ struct gpio_desc *reset;
+ struct gpio_desc *mdc;
+ struct gpio_desc *mdio;
+ struct regmap *map;
+ struct mii_bus *slave_mii_bus;
+
+ unsigned int clk_delay;
+ u8 cmd_read;
+ u8 cmd_write;
+ spinlock_t lock; /* Locks around command writes */
+ struct dsa_switch *ds;
+ struct irq_domain *irqdomain;
+ bool leds_disabled;
+
+ unsigned int cpu_port;
+ unsigned int num_ports;
+ unsigned int num_vlan_mc;
+ unsigned int num_mib_counters;
+ struct rtl8366_mib_counter *mib_counters;
+
+ const struct realtek_smi_ops *ops;
+
+ int vlan_enabled;
+ int vlan4k_enabled;
+
+ char buf[4096];
+};
+
+/**
+ * struct realtek_smi_ops - vtable for the per-SMI-chiptype operations
+ * @detect: detects the chiptype
+ */
+struct realtek_smi_ops {
+ int (*detect)(struct realtek_smi *smi);
+ int (*reset_chip)(struct realtek_smi *smi);
+ int (*setup)(struct realtek_smi *smi);
+ void (*cleanup)(struct realtek_smi *smi);
+ int (*get_mib_counter)(struct realtek_smi *smi,
+ int port,
+ struct rtl8366_mib_counter *mib,
+ u64 *mibvalue);
+ int (*get_vlan_mc)(struct realtek_smi *smi, u32 index,
+ struct rtl8366_vlan_mc *vlanmc);
+ int (*set_vlan_mc)(struct realtek_smi *smi, u32 index,
+ const struct rtl8366_vlan_mc *vlanmc);
+ int (*get_vlan_4k)(struct realtek_smi *smi, u32 vid,
+ struct rtl8366_vlan_4k *vlan4k);
+ int (*set_vlan_4k)(struct realtek_smi *smi,
+ const struct rtl8366_vlan_4k *vlan4k);
+ int (*get_mc_index)(struct realtek_smi *smi, int port, int *val);
+ int (*set_mc_index)(struct realtek_smi *smi, int port, int index);
+ bool (*is_vlan_valid)(struct realtek_smi *smi, unsigned int vlan);
+ int (*enable_vlan)(struct realtek_smi *smi, bool enable);
+ int (*enable_vlan4k)(struct realtek_smi *smi, bool enable);
+ int (*enable_port)(struct realtek_smi *smi, int port, bool enable);
+ int (*phy_read)(struct realtek_smi *smi, int phy, int regnum);
+ int (*phy_write)(struct realtek_smi *smi, int phy, int regnum,
+ u16 val);
+};
+
+struct realtek_smi_variant {
+ const struct dsa_switch_ops *ds_ops;
+ const struct realtek_smi_ops *ops;
+ unsigned int clk_delay;
+ u8 cmd_read;
+ u8 cmd_write;
+};
+
+/* SMI core calls */
+int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
+ u32 data);
+int realtek_smi_setup_mdio(struct realtek_smi *smi);
+
+/* RTL8366 library helpers */
+int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used);
+int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
+ u32 untag, u32 fid);
+int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val);
+int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
+ unsigned int vid);
+int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
+int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
+int rtl8366_reset_vlan(struct realtek_smi *smi);
+int rtl8366_init_vlan(struct realtek_smi *smi);
+int rtl8366_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering);
+int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+void rtl8366_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+int rtl8366_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data);
+int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset);
+void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
+
+extern const struct realtek_smi_variant rtl8366rb_variant;
+
+#endif /* _REALTEK_SMI_H */
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
new file mode 100644
index 000000000000..6dedd43442cc
--- /dev/null
+++ b/drivers/net/dsa/rtl8366.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Realtek SMI library helpers for the RTL8366x variants
+ * RTL8366RB and RTL8366S
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ */
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+
+#include "realtek-smi.h"
+
+int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used)
+{
+ int ret;
+ int i;
+
+ *used = 0;
+ for (i = 0; i < smi->num_ports; i++) {
+ int index = 0;
+
+ ret = smi->ops->get_mc_index(smi, i, &index);
+ if (ret)
+ return ret;
+
+ if (mc_index == index) {
+ *used = 1;
+ break;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);
+
+int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
+ u32 untag, u32 fid)
+{
+ struct rtl8366_vlan_4k vlan4k;
+ int ret;
+ int i;
+
+ /* Update the 4K table */
+ ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+ if (ret)
+ return ret;
+
+ vlan4k.member = member;
+ vlan4k.untag = untag;
+ vlan4k.fid = fid;
+ ret = smi->ops->set_vlan_4k(smi, &vlan4k);
+ if (ret)
+ return ret;
+
+ /* Try to find an existing MC entry for this VID */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ struct rtl8366_vlan_mc vlanmc;
+
+ ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
+ if (ret)
+ return ret;
+
+ if (vid == vlanmc.vid) {
+ /* update the MC entry */
+ vlanmc.member = member;
+ vlanmc.untag = untag;
+ vlanmc.fid = fid;
+
+ ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+ break;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_set_vlan);
+
+int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val)
+{
+ struct rtl8366_vlan_mc vlanmc;
+ int ret;
+ int index;
+
+ ret = smi->ops->get_mc_index(smi, port, &index);
+ if (ret)
+ return ret;
+
+ ret = smi->ops->get_vlan_mc(smi, index, &vlanmc);
+ if (ret)
+ return ret;
+
+ *val = vlanmc.vid;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_pvid);
+
+int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
+ unsigned int vid)
+{
+ struct rtl8366_vlan_mc vlanmc;
+ struct rtl8366_vlan_4k vlan4k;
+ int ret;
+ int i;
+
+ /* Try to find an existing MC entry for this VID */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
+ if (ret)
+ return ret;
+
+ if (vid == vlanmc.vid) {
+ ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+ if (ret)
+ return ret;
+
+ ret = smi->ops->set_mc_index(smi, port, i);
+ return ret;
+ }
+ }
+
+ /* We have no MC entry for this VID, try to find an empty one */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
+ if (ret)
+ return ret;
+
+ if (vlanmc.vid == 0 && vlanmc.member == 0) {
+ /* Update the entry from the 4K table */
+ ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+ if (ret)
+ return ret;
+
+ vlanmc.vid = vid;
+ vlanmc.member = vlan4k.member;
+ vlanmc.untag = vlan4k.untag;
+ vlanmc.fid = vlan4k.fid;
+ ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+ if (ret)
+ return ret;
+
+ ret = smi->ops->set_mc_index(smi, port, i);
+ return ret;
+ }
+ }
+
+ /* MC table is full, try to find an unused entry and replace it */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ int used;
+
+ ret = rtl8366_mc_is_used(smi, i, &used);
+ if (ret)
+ return ret;
+
+ if (!used) {
+ /* Update the entry from the 4K table */
+ ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+ if (ret)
+ return ret;
+
+ vlanmc.vid = vid;
+ vlanmc.member = vlan4k.member;
+ vlanmc.untag = vlan4k.untag;
+ vlanmc.fid = vlan4k.fid;
+ ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+ if (ret)
+ return ret;
+
+ ret = smi->ops->set_mc_index(smi, port, i);
+ return ret;
+ }
+ }
+
+ dev_err(smi->dev,
+ "all VLAN member configurations are in use\n");
+
+ return -ENOSPC;
+}
+EXPORT_SYMBOL_GPL(rtl8366_set_pvid);
+
+int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable)
+{
+ int ret;
+
+ /* To enable 4k VLAN, ordinary VLAN must be enabled first,
+ * but if we disable 4k VLAN it is fine to leave ordinary
+ * VLAN enabled.
+ */
+ if (enable) {
+ /* Make sure VLAN is ON */
+ ret = smi->ops->enable_vlan(smi, true);
+ if (ret)
+ return ret;
+
+ smi->vlan_enabled = true;
+ }
+
+ ret = smi->ops->enable_vlan4k(smi, enable);
+ if (ret)
+ return ret;
+
+ smi->vlan4k_enabled = enable;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k);
+
+int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable)
+{
+ int ret;
+
+ ret = smi->ops->enable_vlan(smi, enable);
+ if (ret)
+ return ret;
+
+ smi->vlan_enabled = enable;
+
+ /* If we turn VLAN off, make sure that we turn off
+ * 4k VLAN as well, if that happened to be on.
+ */
+ if (!enable) {
+ smi->vlan4k_enabled = false;
+ ret = smi->ops->enable_vlan4k(smi, false);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_enable_vlan);
+
+int rtl8366_reset_vlan(struct realtek_smi *smi)
+{
+ struct rtl8366_vlan_mc vlanmc;
+ int ret;
+ int i;
+
+ rtl8366_enable_vlan(smi, false);
+ rtl8366_enable_vlan4k(smi, false);
+
+ /* Clear the 16 VLAN member configurations */
+ vlanmc.vid = 0;
+ vlanmc.priority = 0;
+ vlanmc.member = 0;
+ vlanmc.untag = 0;
+ vlanmc.fid = 0;
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
+
+int rtl8366_init_vlan(struct realtek_smi *smi)
+{
+ int port;
+ int ret;
+
+ ret = rtl8366_reset_vlan(smi);
+ if (ret)
+ return ret;
+
+ /* Loop over the available ports, for each port, associate
+ * it with the VLAN (port+1)
+ */
+ for (port = 0; port < smi->num_ports; port++) {
+ u32 mask;
+
+ if (port == smi->cpu_port)
+ /* For the CPU port, make all ports members of this
+ * VLAN.
+ */
+ mask = GENMASK(smi->num_ports - 1, 0);
+ else
+ /* For all other ports, enable itself plus the
+ * CPU port.
+ */
+ mask = BIT(port) | BIT(smi->cpu_port);
+
+ /* For each port, set the port as member of VLAN (port+1)
+ * and untagged, except for the CPU port: the CPU port (5) is
+ * member of VLAN 6 and so are ALL the other ports as well.
+ * Use filter 0 (no filter).
+ */
+ dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n",
+ (port + 1), port, mask);
+ ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0);
+ if (ret)
+ return ret;
+
+ dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n",
+ (port + 1), port, (port + 1));
+ ret = rtl8366_set_pvid(smi, port, (port + 1));
+ if (ret)
+ return ret;
+ }
+
+ return rtl8366_enable_vlan(smi, true);
+}
+EXPORT_SYMBOL_GPL(rtl8366_init_vlan);
+
+int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
+{
+ struct realtek_smi *smi = ds->priv;
+ struct rtl8366_vlan_4k vlan4k;
+ int ret;
+
+ if (!smi->ops->is_vlan_valid(smi, port))
+ return -EINVAL;
+
+ dev_info(smi->dev, "%s filtering on port %d\n",
+ vlan_filtering ? "enable" : "disable",
+ port);
+
+ /* TODO:
+ * The hardware support filter ID (FID) 0..7, I have no clue how to
+ * support this in the driver when the callback only says on/off.
+ */
+ ret = smi->ops->get_vlan_4k(smi, port, &vlan4k);
+ if (ret)
+ return ret;
+
+ /* Just set the filter to FID 1 for now then */
+ ret = rtl8366_set_vlan(smi, port,
+ vlan4k.member,
+ vlan4k.untag,
+ 1);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
+
+int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct realtek_smi *smi = ds->priv;
+ int ret;
+
+ if (!smi->ops->is_vlan_valid(smi, port))
+ return -EINVAL;
+
+ dev_info(smi->dev, "prepare VLANs %04x..%04x\n",
+ vlan->vid_begin, vlan->vid_end);
+
+ /* Enable VLAN in the hardware
+ * FIXME: what's with this 4k business?
+ * Just rtl8366_enable_vlan() seems inconclusive.
+ */
+ ret = rtl8366_enable_vlan4k(smi, true);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_prepare);
+
+void rtl8366_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ bool untagged = !!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
+ bool pvid = !!(vlan->flags & BRIDGE_VLAN_INFO_PVID);
+ struct realtek_smi *smi = ds->priv;
+ u32 member = 0;
+ u32 untag = 0;
+ u16 vid;
+ int ret;
+
+ if (!smi->ops->is_vlan_valid(smi, port))
+ return;
+
+ dev_info(smi->dev, "add VLAN on port %d, %s, %s\n",
+ port,
+ untagged ? "untagged" : "tagged",
+ pvid ? " PVID" : "no PVID");
+
+ if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
+ dev_err(smi->dev, "port is DSA or CPU port\n");
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+ int pvid_val = 0;
+
+ dev_info(smi->dev, "add VLAN %04x\n", vid);
+ member |= BIT(port);
+
+ if (untagged)
+ untag |= BIT(port);
+
+ /* To ensure that we have a valid MC entry for this VLAN,
+ * initialize the port VLAN ID here.
+ */
+ ret = rtl8366_get_pvid(smi, port, &pvid_val);
+ if (ret < 0) {
+ dev_err(smi->dev, "could not lookup PVID for port %d\n",
+ port);
+ return;
+ }
+ if (pvid_val == 0) {
+ ret = rtl8366_set_pvid(smi, port, vid);
+ if (ret < 0)
+ return;
+ }
+ }
+
+ ret = rtl8366_set_vlan(smi, port, member, untag, 0);
+ if (ret)
+ dev_err(smi->dev,
+ "failed to set up VLAN %04x",
+ vid);
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_add);
+
+int rtl8366_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct realtek_smi *smi = ds->priv;
+ u16 vid;
+ int ret;
+
+ dev_info(smi->dev, "del VLAN on port %d\n", port);
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+ int i;
+
+ dev_info(smi->dev, "del VLAN %04x\n", vid);
+
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ struct rtl8366_vlan_mc vlanmc;
+
+ ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
+ if (ret)
+ return ret;
+
+ if (vid == vlanmc.vid) {
+ /* clear VLAN member configurations */
+ vlanmc.vid = 0;
+ vlanmc.priority = 0;
+ vlanmc.member = 0;
+ vlanmc.untag = 0;
+ vlanmc.fid = 0;
+
+ ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+ if (ret) {
+ dev_err(smi->dev,
+ "failed to remove VLAN %04x\n",
+ vid);
+ return ret;
+ }
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_del);
+
+void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ struct realtek_smi *smi = ds->priv;
+ struct rtl8366_mib_counter *mib;
+ int i;
+
+ if (port >= smi->num_ports)
+ return;
+
+ for (i = 0; i < smi->num_mib_counters; i++) {
+ mib = &smi->mib_counters[i];
+ strncpy(data + i * ETH_GSTRING_LEN,
+ mib->name, ETH_GSTRING_LEN);
+ }
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_strings);
+
+int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ struct realtek_smi *smi = ds->priv;
+
+ /* We only support SS_STATS */
+ if (sset != ETH_SS_STATS)
+ return 0;
+ if (port >= smi->num_ports)
+ return -EINVAL;
+
+ return smi->num_mib_counters;
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_sset_count);
+
+void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+ struct realtek_smi *smi = ds->priv;
+ int i;
+ int ret;
+
+ if (port >= smi->num_ports)
+ return;
+
+ for (i = 0; i < smi->num_mib_counters; i++) {
+ struct rtl8366_mib_counter *mib;
+ u64 mibvalue = 0;
+
+ mib = &smi->mib_counters[i];
+ ret = smi->ops->get_mib_counter(smi, port, mib, &mibvalue);
+ if (ret) {
+ dev_err(smi->dev, "error reading MIB counter %s\n",
+ mib->name);
+ }
+ data[i] = mibvalue;
+ }
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats);
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
new file mode 100644
index 000000000000..1e55b9bf8b56
--- /dev/null
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -0,0 +1,1424 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch
+ *
+ * This is a sparsely documented chip, the only viable documentation seems
+ * to be a patched up code drop from the vendor that appear in various
+ * GPL source trees.
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+#include "realtek-smi.h"
+
+#define RTL8366RB_PORT_NUM_CPU 5
+#define RTL8366RB_NUM_PORTS 6
+#define RTL8366RB_PHY_NO_MAX 4
+#define RTL8366RB_PHY_ADDR_MAX 31
+
+/* Switch Global Configuration register */
+#define RTL8366RB_SGCR 0x0000
+#define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0)
+#define RTL8366RB_SGCR_MAX_LENGTH(a) ((a) << 4)
+#define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3)
+#define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0)
+#define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1)
+#define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2)
+#define RTL8366RB_SGCR_MAX_LENGTH_9216 RTL8366RB_SGCR_MAX_LENGTH(0x3)
+#define RTL8366RB_SGCR_EN_VLAN BIT(13)
+#define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14)
+
+/* Port Enable Control register */
+#define RTL8366RB_PECR 0x0001
+
+/* Switch Security Control registers */
+#define RTL8366RB_SSCR0 0x0002
+#define RTL8366RB_SSCR1 0x0003
+#define RTL8366RB_SSCR2 0x0004
+#define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0)
+
+/* Port Mirror Control Register */
+#define RTL8366RB_PMCR 0x0007
+#define RTL8366RB_PMCR_SOURCE_PORT(a) (a)
+#define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f
+#define RTL8366RB_PMCR_MONITOR_PORT(a) ((a) << 4)
+#define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0
+#define RTL8366RB_PMCR_MIRROR_RX BIT(8)
+#define RTL8366RB_PMCR_MIRROR_TX BIT(9)
+#define RTL8366RB_PMCR_MIRROR_SPC BIT(10)
+#define RTL8366RB_PMCR_MIRROR_ISO BIT(11)
+
+/* bits 0..7 = port 0, bits 8..15 = port 1 */
+#define RTL8366RB_PAACR0 0x0010
+/* bits 0..7 = port 2, bits 8..15 = port 3 */
+#define RTL8366RB_PAACR1 0x0011
+/* bits 0..7 = port 4, bits 8..15 = port 5 */
+#define RTL8366RB_PAACR2 0x0012
+#define RTL8366RB_PAACR_SPEED_10M 0
+#define RTL8366RB_PAACR_SPEED_100M 1
+#define RTL8366RB_PAACR_SPEED_1000M 2
+#define RTL8366RB_PAACR_FULL_DUPLEX BIT(2)
+#define RTL8366RB_PAACR_LINK_UP BIT(4)
+#define RTL8366RB_PAACR_TX_PAUSE BIT(5)
+#define RTL8366RB_PAACR_RX_PAUSE BIT(6)
+#define RTL8366RB_PAACR_AN BIT(7)
+
+#define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \
+ RTL8366RB_PAACR_FULL_DUPLEX | \
+ RTL8366RB_PAACR_LINK_UP | \
+ RTL8366RB_PAACR_TX_PAUSE | \
+ RTL8366RB_PAACR_RX_PAUSE)
+
+/* bits 0..7 = port 0, bits 8..15 = port 1 */
+#define RTL8366RB_PSTAT0 0x0014
+/* bits 0..7 = port 2, bits 8..15 = port 3 */
+#define RTL8366RB_PSTAT1 0x0015
+/* bits 0..7 = port 4, bits 8..15 = port 5 */
+#define RTL8366RB_PSTAT2 0x0016
+
+#define RTL8366RB_POWER_SAVING_REG 0x0021
+
+/* CPU port control reg */
+#define RTL8368RB_CPU_CTRL_REG 0x0061
+#define RTL8368RB_CPU_PORTS_MSK 0x00FF
+/* Enables inserting custom tag length/type 0x8899 */
+#define RTL8368RB_CPU_INSTAG BIT(15)
+
+#define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */
+#define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */
+#define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */
+
+#define RTL8366RB_RESET_CTRL_REG 0x0100
+#define RTL8366RB_CHIP_CTRL_RESET_HW BIT(0)
+#define RTL8366RB_CHIP_CTRL_RESET_SW BIT(1)
+
+#define RTL8366RB_CHIP_ID_REG 0x0509
+#define RTL8366RB_CHIP_ID_8366 0x5937
+#define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A
+#define RTL8366RB_CHIP_VERSION_MASK 0xf
+
+/* PHY registers control */
+#define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000
+#define RTL8366RB_PHY_CTRL_READ BIT(0)
+#define RTL8366RB_PHY_CTRL_WRITE 0
+#define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001
+#define RTL8366RB_PHY_INT_BUSY BIT(0)
+#define RTL8366RB_PHY_EXT_BUSY BIT(4)
+#define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002
+#define RTL8366RB_PHY_EXT_CTRL_REG 0x8010
+#define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011
+#define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012
+
+#define RTL8366RB_PHY_REG_MASK 0x1f
+#define RTL8366RB_PHY_PAGE_OFFSET 5
+#define RTL8366RB_PHY_PAGE_MASK (0xf << 5)
+#define RTL8366RB_PHY_NO_OFFSET 9
+#define RTL8366RB_PHY_NO_MASK (0x1f << 9)
+
+#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
+
+/* LED control registers */
+#define RTL8366RB_LED_BLINKRATE_REG 0x0430
+#define RTL8366RB_LED_BLINKRATE_MASK 0x0007
+#define RTL8366RB_LED_BLINKRATE_28MS 0x0000
+#define RTL8366RB_LED_BLINKRATE_56MS 0x0001
+#define RTL8366RB_LED_BLINKRATE_84MS 0x0002
+#define RTL8366RB_LED_BLINKRATE_111MS 0x0003
+#define RTL8366RB_LED_BLINKRATE_222MS 0x0004
+#define RTL8366RB_LED_BLINKRATE_446MS 0x0005
+
+#define RTL8366RB_LED_CTRL_REG 0x0431
+#define RTL8366RB_LED_OFF 0x0
+#define RTL8366RB_LED_DUP_COL 0x1
+#define RTL8366RB_LED_LINK_ACT 0x2
+#define RTL8366RB_LED_SPD1000 0x3
+#define RTL8366RB_LED_SPD100 0x4
+#define RTL8366RB_LED_SPD10 0x5
+#define RTL8366RB_LED_SPD1000_ACT 0x6
+#define RTL8366RB_LED_SPD100_ACT 0x7
+#define RTL8366RB_LED_SPD10_ACT 0x8
+#define RTL8366RB_LED_SPD100_10_ACT 0x9
+#define RTL8366RB_LED_FIBER 0xa
+#define RTL8366RB_LED_AN_FAULT 0xb
+#define RTL8366RB_LED_LINK_RX 0xc
+#define RTL8366RB_LED_LINK_TX 0xd
+#define RTL8366RB_LED_MASTER 0xe
+#define RTL8366RB_LED_FORCE 0xf
+#define RTL8366RB_LED_0_1_CTRL_REG 0x0432
+#define RTL8366RB_LED_1_OFFSET 6
+#define RTL8366RB_LED_2_3_CTRL_REG 0x0433
+#define RTL8366RB_LED_3_OFFSET 6
+
+#define RTL8366RB_MIB_COUNT 33
+#define RTL8366RB_GLOBAL_MIB_COUNT 1
+#define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050
+#define RTL8366RB_MIB_COUNTER_BASE 0x1000
+#define RTL8366RB_MIB_CTRL_REG 0x13F0
+#define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC
+#define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0)
+#define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1)
+#define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p))
+#define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11)
+
+#define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063
+#define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \
+ (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4)
+#define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf
+#define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4))
+
+#define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C
+#define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185
+
+#define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180
+#define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01
+#define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01
+
+#define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3)
+
+#define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014
+#define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003
+#define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004
+#define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010
+#define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020
+#define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040
+#define RTL8366RB_PORT_STATUS_AN_MASK 0x0080
+
+#define RTL8366RB_NUM_VLANS 16
+#define RTL8366RB_NUM_LEDGROUPS 4
+#define RTL8366RB_NUM_VIDS 4096
+#define RTL8366RB_PRIORITYMAX 7
+#define RTL8366RB_FIDMAX 7
+
+#define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */
+#define RTL8366RB_PORT_2 BIT(1) /* In userspace port 1 */
+#define RTL8366RB_PORT_3 BIT(2) /* In userspace port 2 */
+#define RTL8366RB_PORT_4 BIT(3) /* In userspace port 3 */
+#define RTL8366RB_PORT_5 BIT(4) /* In userspace port 4 */
+
+#define RTL8366RB_PORT_CPU BIT(5) /* CPU port */
+
+#define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \
+ RTL8366RB_PORT_2 | \
+ RTL8366RB_PORT_3 | \
+ RTL8366RB_PORT_4 | \
+ RTL8366RB_PORT_5 | \
+ RTL8366RB_PORT_CPU)
+
+#define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \
+ RTL8366RB_PORT_2 | \
+ RTL8366RB_PORT_3 | \
+ RTL8366RB_PORT_4 | \
+ RTL8366RB_PORT_5)
+
+#define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \
+ RTL8366RB_PORT_2 | \
+ RTL8366RB_PORT_3 | \
+ RTL8366RB_PORT_4)
+
+#define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU
+
+/* First configuration word per member config, VID and prio */
+#define RTL8366RB_VLAN_VID_MASK 0xfff
+#define RTL8366RB_VLAN_PRIORITY_SHIFT 12
+#define RTL8366RB_VLAN_PRIORITY_MASK 0x7
+/* Second configuration word per member config, member and untagged */
+#define RTL8366RB_VLAN_UNTAG_SHIFT 8
+#define RTL8366RB_VLAN_UNTAG_MASK 0xff
+#define RTL8366RB_VLAN_MEMBER_MASK 0xff
+/* Third config word per member config, STAG currently unused */
+#define RTL8366RB_VLAN_STAG_MBR_MASK 0xff
+#define RTL8366RB_VLAN_STAG_MBR_SHIFT 8
+#define RTL8366RB_VLAN_STAG_IDX_MASK 0x7
+#define RTL8366RB_VLAN_STAG_IDX_SHIFT 5
+#define RTL8366RB_VLAN_FID_MASK 0x7
+
+/* Port ingress bandwidth control */
+#define RTL8366RB_IB_BASE 0x0200
+#define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + (pnum))
+#define RTL8366RB_IB_BDTH_MASK 0x3fff
+#define RTL8366RB_IB_PREIFG BIT(14)
+
+/* Port egress bandwidth control */
+#define RTL8366RB_EB_BASE 0x02d1
+#define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + (pnum))
+#define RTL8366RB_EB_BDTH_MASK 0x3fff
+#define RTL8366RB_EB_PREIFG_REG 0x02f8
+#define RTL8366RB_EB_PREIFG BIT(9)
+
+#define RTL8366RB_BDTH_SW_MAX 1048512 /* 1048576? */
+#define RTL8366RB_BDTH_UNIT 64
+#define RTL8366RB_BDTH_REG_DEFAULT 16383
+
+/* QOS */
+#define RTL8366RB_QOS BIT(15)
+/* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */
+#define RTL8366RB_QOS_DEFAULT_PREIFG 1
+
+/* Interrupt handling */
+#define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440
+#define RTL8366RB_INTERRUPT_POLARITY BIT(0)
+#define RTL8366RB_P4_RGMII_LED BIT(2)
+#define RTL8366RB_INTERRUPT_MASK_REG 0x0441
+#define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0)
+#define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8)
+#define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9)
+#define RTL8366RB_INTERRUPT_P4_FIBER BIT(12)
+#define RTL8366RB_INTERRUPT_P4_UTP BIT(13)
+#define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \
+ RTL8366RB_INTERRUPT_ACLEXCEED | \
+ RTL8366RB_INTERRUPT_STORMEXCEED | \
+ RTL8366RB_INTERRUPT_P4_FIBER | \
+ RTL8366RB_INTERRUPT_P4_UTP)
+#define RTL8366RB_INTERRUPT_STATUS_REG 0x0442
+#define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */
+
+/* bits 0..5 enable force when cleared */
+#define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11
+
+#define RTL8366RB_OAM_PARSER_REG 0x0F14
+#define RTL8366RB_OAM_MULTIPLEXER_REG 0x0F15
+
+#define RTL8366RB_GREEN_FEATURE_REG 0x0F51
+#define RTL8366RB_GREEN_FEATURE_MSK 0x0007
+#define RTL8366RB_GREEN_FEATURE_TX BIT(0)
+#define RTL8366RB_GREEN_FEATURE_RX BIT(2)
+
+static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
+ { 0, 0, 4, "IfInOctets" },
+ { 0, 4, 4, "EtherStatsOctets" },
+ { 0, 8, 2, "EtherStatsUnderSizePkts" },
+ { 0, 10, 2, "EtherFragments" },
+ { 0, 12, 2, "EtherStatsPkts64Octets" },
+ { 0, 14, 2, "EtherStatsPkts65to127Octets" },
+ { 0, 16, 2, "EtherStatsPkts128to255Octets" },
+ { 0, 18, 2, "EtherStatsPkts256to511Octets" },
+ { 0, 20, 2, "EtherStatsPkts512to1023Octets" },
+ { 0, 22, 2, "EtherStatsPkts1024to1518Octets" },
+ { 0, 24, 2, "EtherOversizeStats" },
+ { 0, 26, 2, "EtherStatsJabbers" },
+ { 0, 28, 2, "IfInUcastPkts" },
+ { 0, 30, 2, "EtherStatsMulticastPkts" },
+ { 0, 32, 2, "EtherStatsBroadcastPkts" },
+ { 0, 34, 2, "EtherStatsDropEvents" },
+ { 0, 36, 2, "Dot3StatsFCSErrors" },
+ { 0, 38, 2, "Dot3StatsSymbolErrors" },
+ { 0, 40, 2, "Dot3InPauseFrames" },
+ { 0, 42, 2, "Dot3ControlInUnknownOpcodes" },
+ { 0, 44, 4, "IfOutOctets" },
+ { 0, 48, 2, "Dot3StatsSingleCollisionFrames" },
+ { 0, 50, 2, "Dot3StatMultipleCollisionFrames" },
+ { 0, 52, 2, "Dot3sDeferredTransmissions" },
+ { 0, 54, 2, "Dot3StatsLateCollisions" },
+ { 0, 56, 2, "EtherStatsCollisions" },
+ { 0, 58, 2, "Dot3StatsExcessiveCollisions" },
+ { 0, 60, 2, "Dot3OutPauseFrames" },
+ { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" },
+ { 0, 64, 2, "Dot1dTpPortInDiscards" },
+ { 0, 66, 2, "IfOutUcastPkts" },
+ { 0, 68, 2, "IfOutMulticastPkts" },
+ { 0, 70, 2, "IfOutBroadcastPkts" },
+};
+
+static int rtl8366rb_get_mib_counter(struct realtek_smi *smi,
+ int port,
+ struct rtl8366_mib_counter *mib,
+ u64 *mibvalue)
+{
+ u32 addr, val;
+ int ret;
+ int i;
+
+ addr = RTL8366RB_MIB_COUNTER_BASE +
+ RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) +
+ mib->offset;
+
+ /* Writing access counter address first
+ * then ASIC will prepare 64bits counter wait for being retrived
+ */
+ ret = regmap_write(smi->map, addr, 0); /* Write whatever */
+ if (ret)
+ return ret;
+
+ /* Read MIB control register */
+ ret = regmap_read(smi->map, RTL8366RB_MIB_CTRL_REG, &val);
+ if (ret)
+ return -EIO;
+
+ if (val & RTL8366RB_MIB_CTRL_BUSY_MASK)
+ return -EBUSY;
+
+ if (val & RTL8366RB_MIB_CTRL_RESET_MASK)
+ return -EIO;
+
+ /* Read each individual MIB 16 bits at the time */
+ *mibvalue = 0;
+ for (i = mib->length; i > 0; i--) {
+ ret = regmap_read(smi->map, addr + (i - 1), &val);
+ if (ret)
+ return ret;
+ *mibvalue = (*mibvalue << 16) | (val & 0xFFFF);
+ }
+ return 0;
+}
+
+static u32 rtl8366rb_get_irqmask(struct irq_data *d)
+{
+ int line = irqd_to_hwirq(d);
+ u32 val;
+
+ /* For line interrupts we combine link down in bits
+ * 6..11 with link up in bits 0..5 into one interrupt.
+ */
+ if (line < 12)
+ val = BIT(line) | BIT(line + 6);
+ else
+ val = BIT(line);
+ return val;
+}
+
+static void rtl8366rb_mask_irq(struct irq_data *d)
+{
+ struct realtek_smi *smi = irq_data_get_irq_chip_data(d);
+ int ret;
+
+ ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG,
+ rtl8366rb_get_irqmask(d), 0);
+ if (ret)
+ dev_err(smi->dev, "could not mask IRQ\n");
+}
+
+static void rtl8366rb_unmask_irq(struct irq_data *d)
+{
+ struct realtek_smi *smi = irq_data_get_irq_chip_data(d);
+ int ret;
+
+ ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG,
+ rtl8366rb_get_irqmask(d),
+ rtl8366rb_get_irqmask(d));
+ if (ret)
+ dev_err(smi->dev, "could not unmask IRQ\n");
+}
+
+static irqreturn_t rtl8366rb_irq(int irq, void *data)
+{
+ struct realtek_smi *smi = data;
+ u32 stat;
+ int ret;
+
+ /* This clears the IRQ status register */
+ ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG,
+ &stat);
+ if (ret) {
+ dev_err(smi->dev, "can't read interrupt status\n");
+ return IRQ_NONE;
+ }
+ stat &= RTL8366RB_INTERRUPT_VALID;
+ if (!stat)
+ return IRQ_NONE;
+ while (stat) {
+ int line = __ffs(stat);
+ int child_irq;
+
+ stat &= ~BIT(line);
+ /* For line interrupts we combine link down in bits
+ * 6..11 with link up in bits 0..5 into one interrupt.
+ */
+ if (line < 12 && line > 5)
+ line -= 5;
+ child_irq = irq_find_mapping(smi->irqdomain, line);
+ handle_nested_irq(child_irq);
+ }
+ return IRQ_HANDLED;
+}
+
+static struct irq_chip rtl8366rb_irq_chip = {
+ .name = "RTL8366RB",
+ .irq_mask = rtl8366rb_mask_irq,
+ .irq_unmask = rtl8366rb_unmask_irq,
+};
+
+static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, domain->host_data);
+ irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq);
+ irq_set_nested_thread(irq, 1);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_set_nested_thread(irq, 0);
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops rtl8366rb_irqdomain_ops = {
+ .map = rtl8366rb_irq_map,
+ .unmap = rtl8366rb_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
+{
+ struct device_node *intc;
+ unsigned long irq_trig;
+ int irq;
+ int ret;
+ u32 val;
+ int i;
+
+ intc = of_get_child_by_name(smi->dev->of_node, "interrupt-controller");
+ if (!intc) {
+ dev_err(smi->dev, "missing child interrupt-controller node\n");
+ return -EINVAL;
+ }
+ /* RB8366RB IRQs cascade off this one */
+ irq = of_irq_get(intc, 0);
+ if (irq <= 0) {
+ dev_err(smi->dev, "failed to get parent IRQ\n");
+ return irq ? irq : -EINVAL;
+ }
+
+ /* This clears the IRQ status register */
+ ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG,
+ &val);
+ if (ret) {
+ dev_err(smi->dev, "can't read interrupt status\n");
+ return ret;
+ }
+
+ /* Fetch IRQ edge information from the descriptor */
+ irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+ switch (irq_trig) {
+ case IRQF_TRIGGER_RISING:
+ case IRQF_TRIGGER_HIGH:
+ dev_info(smi->dev, "active high/rising IRQ\n");
+ val = 0;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ case IRQF_TRIGGER_LOW:
+ dev_info(smi->dev, "active low/falling IRQ\n");
+ val = RTL8366RB_INTERRUPT_POLARITY;
+ break;
+ }
+ ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_CONTROL_REG,
+ RTL8366RB_INTERRUPT_POLARITY,
+ val);
+ if (ret) {
+ dev_err(smi->dev, "could not configure IRQ polarity\n");
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(smi->dev, irq, NULL,
+ rtl8366rb_irq, IRQF_ONESHOT,
+ "RTL8366RB", smi);
+ if (ret) {
+ dev_err(smi->dev, "unable to request irq: %d\n", ret);
+ return ret;
+ }
+ smi->irqdomain = irq_domain_add_linear(intc,
+ RTL8366RB_NUM_INTERRUPT,
+ &rtl8366rb_irqdomain_ops,
+ smi);
+ if (!smi->irqdomain) {
+ dev_err(smi->dev, "failed to create IRQ domain\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < smi->num_ports; i++)
+ irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq);
+
+ return 0;
+}
+
+static int rtl8366rb_set_addr(struct realtek_smi *smi)
+{
+ u8 addr[ETH_ALEN];
+ u16 val;
+ int ret;
+
+ eth_random_addr(addr);
+
+ dev_info(smi->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+ val = addr[0] << 8 | addr[1];
+ ret = regmap_write(smi->map, RTL8366RB_SMAR0, val);
+ if (ret)
+ return ret;
+ val = addr[2] << 8 | addr[3];
+ ret = regmap_write(smi->map, RTL8366RB_SMAR1, val);
+ if (ret)
+ return ret;
+ val = addr[4] << 8 | addr[5];
+ ret = regmap_write(smi->map, RTL8366RB_SMAR2, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/* Found in a vendor driver */
+
+/* For the "version 0" early silicon, appear in most source releases */
+static const u16 rtl8366rb_init_jam_ver_0[] = {
+ 0x000B, 0x0001, 0x03A6, 0x0100, 0x03A7, 0x0001, 0x02D1, 0x3FFF,
+ 0x02D2, 0x3FFF, 0x02D3, 0x3FFF, 0x02D4, 0x3FFF, 0x02D5, 0x3FFF,
+ 0x02D6, 0x3FFF, 0x02D7, 0x3FFF, 0x02D8, 0x3FFF, 0x022B, 0x0688,
+ 0x022C, 0x0FAC, 0x03D0, 0x4688, 0x03D1, 0x01F5, 0x0000, 0x0830,
+ 0x02F9, 0x0200, 0x02F7, 0x7FFF, 0x02F8, 0x03FF, 0x0080, 0x03E8,
+ 0x0081, 0x00CE, 0x0082, 0x00DA, 0x0083, 0x0230, 0xBE0F, 0x2000,
+ 0x0231, 0x422A, 0x0232, 0x422A, 0x0233, 0x422A, 0x0234, 0x422A,
+ 0x0235, 0x422A, 0x0236, 0x422A, 0x0237, 0x422A, 0x0238, 0x422A,
+ 0x0239, 0x422A, 0x023A, 0x422A, 0x023B, 0x422A, 0x023C, 0x422A,
+ 0x023D, 0x422A, 0x023E, 0x422A, 0x023F, 0x422A, 0x0240, 0x422A,
+ 0x0241, 0x422A, 0x0242, 0x422A, 0x0243, 0x422A, 0x0244, 0x422A,
+ 0x0245, 0x422A, 0x0246, 0x422A, 0x0247, 0x422A, 0x0248, 0x422A,
+ 0x0249, 0x0146, 0x024A, 0x0146, 0x024B, 0x0146, 0xBE03, 0xC961,
+ 0x024D, 0x0146, 0x024E, 0x0146, 0x024F, 0x0146, 0x0250, 0x0146,
+ 0xBE64, 0x0226, 0x0252, 0x0146, 0x0253, 0x0146, 0x024C, 0x0146,
+ 0x0251, 0x0146, 0x0254, 0x0146, 0xBE62, 0x3FD0, 0x0084, 0x0320,
+ 0x0255, 0x0146, 0x0256, 0x0146, 0x0257, 0x0146, 0x0258, 0x0146,
+ 0x0259, 0x0146, 0x025A, 0x0146, 0x025B, 0x0146, 0x025C, 0x0146,
+ 0x025D, 0x0146, 0x025E, 0x0146, 0x025F, 0x0146, 0x0260, 0x0146,
+ 0x0261, 0xA23F, 0x0262, 0x0294, 0x0263, 0xA23F, 0x0264, 0x0294,
+ 0x0265, 0xA23F, 0x0266, 0x0294, 0x0267, 0xA23F, 0x0268, 0x0294,
+ 0x0269, 0xA23F, 0x026A, 0x0294, 0x026B, 0xA23F, 0x026C, 0x0294,
+ 0x026D, 0xA23F, 0x026E, 0x0294, 0x026F, 0xA23F, 0x0270, 0x0294,
+ 0x02F5, 0x0048, 0xBE09, 0x0E00, 0xBE1E, 0x0FA0, 0xBE14, 0x8448,
+ 0xBE15, 0x1007, 0xBE4A, 0xA284, 0xC454, 0x3F0B, 0xC474, 0x3F0B,
+ 0xBE48, 0x3672, 0xBE4B, 0x17A7, 0xBE4C, 0x0B15, 0xBE52, 0x0EDD,
+ 0xBE49, 0x8C00, 0xBE5B, 0x785C, 0xBE5C, 0x785C, 0xBE5D, 0x785C,
+ 0xBE61, 0x368A, 0xBE63, 0x9B84, 0xC456, 0xCC13, 0xC476, 0xCC13,
+ 0xBE65, 0x307D, 0xBE6D, 0x0005, 0xBE6E, 0xE120, 0xBE2E, 0x7BAF,
+};
+
+/* This v1 init sequence is from Belkin F5D8235 U-Boot release */
+static const u16 rtl8366rb_init_jam_ver_1[] = {
+ 0x0000, 0x0830, 0x0001, 0x8000, 0x0400, 0x8130, 0xBE78, 0x3C3C,
+ 0x0431, 0x5432, 0xBE37, 0x0CE4, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0,
+ 0xC44C, 0x1585, 0xC44C, 0x1185, 0xC44C, 0x1585, 0xC46C, 0x1585,
+ 0xC46C, 0x1185, 0xC46C, 0x1585, 0xC451, 0x2135, 0xC471, 0x2135,
+ 0xBE10, 0x8140, 0xBE15, 0x0007, 0xBE6E, 0xE120, 0xBE69, 0xD20F,
+ 0xBE6B, 0x0320, 0xBE24, 0xB000, 0xBE23, 0xFF51, 0xBE22, 0xDF20,
+ 0xBE21, 0x0140, 0xBE20, 0x00BB, 0xBE24, 0xB800, 0xBE24, 0x0000,
+ 0xBE24, 0x7000, 0xBE23, 0xFF51, 0xBE22, 0xDF60, 0xBE21, 0x0140,
+ 0xBE20, 0x0077, 0xBE24, 0x7800, 0xBE24, 0x0000, 0xBE2E, 0x7B7A,
+ 0xBE36, 0x0CE4, 0x02F5, 0x0048, 0xBE77, 0x2940, 0x000A, 0x83E0,
+ 0xBE79, 0x3C3C, 0xBE00, 0x1340,
+};
+
+/* This v2 init sequence is from Belkin F5D8235 U-Boot release */
+static const u16 rtl8366rb_init_jam_ver_2[] = {
+ 0x0450, 0x0000, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0431, 0x5432,
+ 0xC44F, 0x6250, 0xC46F, 0x6250, 0xC456, 0x0C14, 0xC476, 0x0C14,
+ 0xC44C, 0x1C85, 0xC44C, 0x1885, 0xC44C, 0x1C85, 0xC46C, 0x1C85,
+ 0xC46C, 0x1885, 0xC46C, 0x1C85, 0xC44C, 0x0885, 0xC44C, 0x0881,
+ 0xC44C, 0x0885, 0xC46C, 0x0885, 0xC46C, 0x0881, 0xC46C, 0x0885,
+ 0xBE2E, 0x7BA7, 0xBE36, 0x1000, 0xBE37, 0x1000, 0x8000, 0x0001,
+ 0xBE69, 0xD50F, 0x8000, 0x0000, 0xBE69, 0xD50F, 0xBE6E, 0x0320,
+ 0xBE77, 0x2940, 0xBE78, 0x3C3C, 0xBE79, 0x3C3C, 0xBE6E, 0xE120,
+ 0x8000, 0x0001, 0xBE15, 0x1007, 0x8000, 0x0000, 0xBE15, 0x1007,
+ 0xBE14, 0x0448, 0xBE1E, 0x00A0, 0xBE10, 0x8160, 0xBE10, 0x8140,
+ 0xBE00, 0x1340, 0x0F51, 0x0010,
+};
+
+/* Appears in a DDWRT code dump */
+static const u16 rtl8366rb_init_jam_ver_3[] = {
+ 0x0000, 0x0830, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0431, 0x5432,
+ 0x0F51, 0x0017, 0x02F5, 0x0048, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0,
+ 0xC456, 0x0C14, 0xC476, 0x0C14, 0xC454, 0x3F8B, 0xC474, 0x3F8B,
+ 0xC450, 0x2071, 0xC470, 0x2071, 0xC451, 0x226B, 0xC471, 0x226B,
+ 0xC452, 0xA293, 0xC472, 0xA293, 0xC44C, 0x1585, 0xC44C, 0x1185,
+ 0xC44C, 0x1585, 0xC46C, 0x1585, 0xC46C, 0x1185, 0xC46C, 0x1585,
+ 0xC44C, 0x0185, 0xC44C, 0x0181, 0xC44C, 0x0185, 0xC46C, 0x0185,
+ 0xC46C, 0x0181, 0xC46C, 0x0185, 0xBE24, 0xB000, 0xBE23, 0xFF51,
+ 0xBE22, 0xDF20, 0xBE21, 0x0140, 0xBE20, 0x00BB, 0xBE24, 0xB800,
+ 0xBE24, 0x0000, 0xBE24, 0x7000, 0xBE23, 0xFF51, 0xBE22, 0xDF60,
+ 0xBE21, 0x0140, 0xBE20, 0x0077, 0xBE24, 0x7800, 0xBE24, 0x0000,
+ 0xBE2E, 0x7BA7, 0xBE36, 0x1000, 0xBE37, 0x1000, 0x8000, 0x0001,
+ 0xBE69, 0xD50F, 0x8000, 0x0000, 0xBE69, 0xD50F, 0xBE6B, 0x0320,
+ 0xBE77, 0x2800, 0xBE78, 0x3C3C, 0xBE79, 0x3C3C, 0xBE6E, 0xE120,
+ 0x8000, 0x0001, 0xBE10, 0x8140, 0x8000, 0x0000, 0xBE10, 0x8140,
+ 0xBE15, 0x1007, 0xBE14, 0x0448, 0xBE1E, 0x00A0, 0xBE10, 0x8160,
+ 0xBE10, 0x8140, 0xBE00, 0x1340, 0x0450, 0x0000, 0x0401, 0x0000,
+};
+
+/* Belkin F5D8235 v1, "belkin,f5d8235-v1" */
+static const u16 rtl8366rb_init_jam_f5d8235[] = {
+ 0x0242, 0x02BF, 0x0245, 0x02BF, 0x0248, 0x02BF, 0x024B, 0x02BF,
+ 0x024E, 0x02BF, 0x0251, 0x02BF, 0x0254, 0x0A3F, 0x0256, 0x0A3F,
+ 0x0258, 0x0A3F, 0x025A, 0x0A3F, 0x025C, 0x0A3F, 0x025E, 0x0A3F,
+ 0x0263, 0x007C, 0x0100, 0x0004, 0xBE5B, 0x3500, 0x800E, 0x200F,
+ 0xBE1D, 0x0F00, 0x8001, 0x5011, 0x800A, 0xA2F4, 0x800B, 0x17A3,
+ 0xBE4B, 0x17A3, 0xBE41, 0x5011, 0xBE17, 0x2100, 0x8000, 0x8304,
+ 0xBE40, 0x8304, 0xBE4A, 0xA2F4, 0x800C, 0xA8D5, 0x8014, 0x5500,
+ 0x8015, 0x0004, 0xBE4C, 0xA8D5, 0xBE59, 0x0008, 0xBE09, 0x0E00,
+ 0xBE36, 0x1036, 0xBE37, 0x1036, 0x800D, 0x00FF, 0xBE4D, 0x00FF,
+};
+
+/* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */
+static const u16 rtl8366rb_init_jam_dgn3500[] = {
+ 0x0000, 0x0830, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0F51, 0x0017,
+ 0x02F5, 0x0048, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0, 0x0450, 0x0000,
+ 0x0401, 0x0000, 0x0431, 0x0960,
+};
+
+/* This jam table activates "green ethernet", which means low power mode
+ * and is claimed to detect the cable length and not use more power than
+ * necessary, and the ports should enter power saving mode 10 seconds after
+ * a cable is disconnected. Seems to always be the same.
+ */
+static const u16 rtl8366rb_green_jam[][2] = {
+ {0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7},
+ {0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C},
+ {0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C},
+};
+
+static int rtl8366rb_setup(struct dsa_switch *ds)
+{
+ struct realtek_smi *smi = ds->priv;
+ const u16 *jam_table;
+ u32 chip_ver = 0;
+ u32 chip_id = 0;
+ int jam_size;
+ u32 val;
+ int ret;
+ int i;
+
+ ret = regmap_read(smi->map, RTL8366RB_CHIP_ID_REG, &chip_id);
+ if (ret) {
+ dev_err(smi->dev, "unable to read chip id\n");
+ return ret;
+ }
+
+ switch (chip_id) {
+ case RTL8366RB_CHIP_ID_8366:
+ break;
+ default:
+ dev_err(smi->dev, "unknown chip id (%04x)\n", chip_id);
+ return -ENODEV;
+ }
+
+ ret = regmap_read(smi->map, RTL8366RB_CHIP_VERSION_CTRL_REG,
+ &chip_ver);
+ if (ret) {
+ dev_err(smi->dev, "unable to read chip version\n");
+ return ret;
+ }
+
+ dev_info(smi->dev, "RTL%04x ver %u chip found\n",
+ chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK);
+
+ /* Do the init dance using the right jam table */
+ switch (chip_ver) {
+ case 0:
+ jam_table = rtl8366rb_init_jam_ver_0;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0);
+ break;
+ case 1:
+ jam_table = rtl8366rb_init_jam_ver_1;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1);
+ break;
+ case 2:
+ jam_table = rtl8366rb_init_jam_ver_2;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2);
+ break;
+ default:
+ jam_table = rtl8366rb_init_jam_ver_3;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3);
+ break;
+ }
+
+ /* Special jam tables for special routers
+ * TODO: are these necessary? Maintainers, please test
+ * without them, using just the off-the-shelf tables.
+ */
+ if (of_machine_is_compatible("belkin,f5d8235-v1")) {
+ jam_table = rtl8366rb_init_jam_f5d8235;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235);
+ }
+ if (of_machine_is_compatible("netgear,dgn3500") ||
+ of_machine_is_compatible("netgear,dgn3500b")) {
+ jam_table = rtl8366rb_init_jam_dgn3500;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500);
+ }
+
+ i = 0;
+ while (i < jam_size) {
+ if ((jam_table[i] & 0xBE00) == 0xBE00) {
+ ret = regmap_read(smi->map,
+ RTL8366RB_PHY_ACCESS_BUSY_REG,
+ &val);
+ if (ret)
+ return ret;
+ if (!(val & RTL8366RB_PHY_INT_BUSY)) {
+ ret = regmap_write(smi->map,
+ RTL8366RB_PHY_ACCESS_CTRL_REG,
+ RTL8366RB_PHY_CTRL_WRITE);
+ if (ret)
+ return ret;
+ }
+ }
+ dev_dbg(smi->dev, "jam %04x into register %04x\n",
+ jam_table[i + 1],
+ jam_table[i]);
+ ret = regmap_write(smi->map,
+ jam_table[i],
+ jam_table[i + 1]);
+ if (ret)
+ return ret;
+ i += 2;
+ }
+
+ /* Set up the "green ethernet" feature */
+ i = 0;
+ while (i < ARRAY_SIZE(rtl8366rb_green_jam)) {
+ ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_BUSY_REG,
+ &val);
+ if (ret)
+ return ret;
+ if (!(val & RTL8366RB_PHY_INT_BUSY)) {
+ ret = regmap_write(smi->map,
+ RTL8366RB_PHY_ACCESS_CTRL_REG,
+ RTL8366RB_PHY_CTRL_WRITE);
+ if (ret)
+ return ret;
+ ret = regmap_write(smi->map,
+ rtl8366rb_green_jam[i][0],
+ rtl8366rb_green_jam[i][1]);
+ if (ret)
+ return ret;
+ i++;
+ }
+ }
+ ret = regmap_write(smi->map,
+ RTL8366RB_GREEN_FEATURE_REG,
+ (chip_ver == 1) ? 0x0007 : 0x0003);
+ if (ret)
+ return ret;
+
+ /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */
+ ret = regmap_write(smi->map, 0x0c, 0x240);
+ if (ret)
+ return ret;
+ ret = regmap_write(smi->map, 0x0d, 0x240);
+ if (ret)
+ return ret;
+
+ /* Set some random MAC address */
+ ret = rtl8366rb_set_addr(smi);
+ if (ret)
+ return ret;
+
+ /* Enable CPU port and enable inserting CPU tag
+ *
+ * Disabling RTL8368RB_CPU_INSTAG here will change the behaviour
+ * of the switch totally and it will start talking Realtek RRCP
+ * internally. It is probably possible to experiment with this,
+ * but then the kernel needs to understand and handle RRCP first.
+ */
+ ret = regmap_update_bits(smi->map, RTL8368RB_CPU_CTRL_REG,
+ 0xFFFF,
+ RTL8368RB_CPU_INSTAG | BIT(smi->cpu_port));
+ if (ret)
+ return ret;
+
+ /* Make sure we default-enable the fixed CPU port */
+ ret = regmap_update_bits(smi->map, RTL8366RB_PECR,
+ BIT(smi->cpu_port),
+ 0);
+ if (ret)
+ return ret;
+
+ /* Set maximum packet length to 1536 bytes */
+ ret = regmap_update_bits(smi->map, RTL8366RB_SGCR,
+ RTL8366RB_SGCR_MAX_LENGTH_MASK,
+ RTL8366RB_SGCR_MAX_LENGTH_1536);
+ if (ret)
+ return ret;
+
+ /* Enable learning for all ports */
+ ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0);
+ if (ret)
+ return ret;
+
+ /* Enable auto ageing for all ports */
+ ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0);
+ if (ret)
+ return ret;
+
+ /* Discard VLAN tagged packets if the port is not a member of
+ * the VLAN with which the packets is associated.
+ */
+ ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+ RTL8366RB_PORT_ALL);
+ if (ret)
+ return ret;
+
+ /* Don't drop packets whose DA has not been learned */
+ ret = regmap_update_bits(smi->map, RTL8366RB_SSCR2,
+ RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0);
+ if (ret)
+ return ret;
+
+ /* Set blinking, TODO: make this configurable */
+ ret = regmap_update_bits(smi->map, RTL8366RB_LED_BLINKRATE_REG,
+ RTL8366RB_LED_BLINKRATE_MASK,
+ RTL8366RB_LED_BLINKRATE_56MS);
+ if (ret)
+ return ret;
+
+ /* Set up LED activity:
+ * Each port has 4 LEDs, we configure all ports to the same
+ * behaviour (no individual config) but we can set up each
+ * LED separately.
+ */
+ if (smi->leds_disabled) {
+ /* Turn everything off */
+ regmap_update_bits(smi->map,
+ RTL8366RB_LED_0_1_CTRL_REG,
+ 0x0FFF, 0);
+ regmap_update_bits(smi->map,
+ RTL8366RB_LED_2_3_CTRL_REG,
+ 0x0FFF, 0);
+ regmap_update_bits(smi->map,
+ RTL8366RB_INTERRUPT_CONTROL_REG,
+ RTL8366RB_P4_RGMII_LED,
+ 0);
+ val = RTL8366RB_LED_OFF;
+ } else {
+ /* TODO: make this configurable per LED */
+ val = RTL8366RB_LED_FORCE;
+ }
+ for (i = 0; i < 4; i++) {
+ ret = regmap_update_bits(smi->map,
+ RTL8366RB_LED_CTRL_REG,
+ 0xf << (i * 4),
+ val << (i * 4));
+ if (ret)
+ return ret;
+ }
+
+ ret = rtl8366_init_vlan(smi);
+ if (ret)
+ return ret;
+
+ ret = rtl8366rb_setup_cascaded_irq(smi);
+ if (ret)
+ dev_info(smi->dev, "no interrupt support\n");
+
+ ret = realtek_smi_setup_mdio(smi);
+ if (ret) {
+ dev_info(smi->dev, "could not set up MDIO bus\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds,
+ int port)
+{
+ /* For now, the RTL switches are handled without any custom tags.
+ *
+ * It is possible to turn on "custom tags" by removing the
+ * RTL8368RB_CPU_INSTAG flag when enabling the port but what it
+ * does is unfamiliar to DSA: ethernet frames of type 8899, the Realtek
+ * Remote Control Protocol (RRCP) start to appear on the CPU port of
+ * the device. So this is not the ordinary few extra bytes in the
+ * frame. Instead it appears that the switch starts to talk Realtek
+ * RRCP internally which means a pretty complex RRCP implementation
+ * decoding and responding the RRCP protocol is needed to exploit this.
+ *
+ * The OpenRRCP project (dormant since 2009) have reverse-egineered
+ * parts of the protocol.
+ */
+ return DSA_TAG_PROTO_NONE;
+}
+
+static void rtl8366rb_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct realtek_smi *smi = ds->priv;
+ int ret;
+
+ if (port != smi->cpu_port)
+ return;
+
+ dev_info(smi->dev, "adjust link on CPU port (%d)\n", port);
+
+ /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */
+ ret = regmap_update_bits(smi->map, RTL8366RB_MAC_FORCE_CTRL_REG,
+ BIT(port), BIT(port));
+ if (ret)
+ return;
+
+ ret = regmap_update_bits(smi->map, RTL8366RB_PAACR2,
+ 0xFF00U,
+ RTL8366RB_PAACR_CPU_PORT << 8);
+ if (ret)
+ return;
+
+ /* Enable the CPU port */
+ ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port),
+ 0);
+ if (ret)
+ return;
+}
+
+static void rb8366rb_set_port_led(struct realtek_smi *smi,
+ int port, bool enable)
+{
+ u16 val = enable ? 0x3f : 0;
+ int ret;
+
+ if (smi->leds_disabled)
+ return;
+
+ switch (port) {
+ case 0:
+ ret = regmap_update_bits(smi->map,
+ RTL8366RB_LED_0_1_CTRL_REG,
+ 0x3F, val);
+ break;
+ case 1:
+ ret = regmap_update_bits(smi->map,
+ RTL8366RB_LED_0_1_CTRL_REG,
+ 0x3F << RTL8366RB_LED_1_OFFSET,
+ val << RTL8366RB_LED_1_OFFSET);
+ break;
+ case 2:
+ ret = regmap_update_bits(smi->map,
+ RTL8366RB_LED_2_3_CTRL_REG,
+ 0x3F, val);
+ break;
+ case 3:
+ ret = regmap_update_bits(smi->map,
+ RTL8366RB_LED_2_3_CTRL_REG,
+ 0x3F << RTL8366RB_LED_3_OFFSET,
+ val << RTL8366RB_LED_3_OFFSET);
+ break;
+ case 4:
+ ret = regmap_update_bits(smi->map,
+ RTL8366RB_INTERRUPT_CONTROL_REG,
+ RTL8366RB_P4_RGMII_LED,
+ enable ? RTL8366RB_P4_RGMII_LED : 0);
+ break;
+ default:
+ dev_err(smi->dev, "no LED for port %d\n", port);
+ return;
+ }
+ if (ret)
+ dev_err(smi->dev, "error updating LED on port %d\n", port);
+}
+
+static int
+rtl8366rb_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct realtek_smi *smi = ds->priv;
+ int ret;
+
+ dev_dbg(smi->dev, "enable port %d\n", port);
+ ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port),
+ 0);
+ if (ret)
+ return ret;
+
+ rb8366rb_set_port_led(smi, port, true);
+ return 0;
+}
+
+static void
+rtl8366rb_port_disable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct realtek_smi *smi = ds->priv;
+ int ret;
+
+ dev_dbg(smi->dev, "disable port %d\n", port);
+ ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port),
+ BIT(port));
+ if (ret)
+ return;
+
+ rb8366rb_set_port_led(smi, port, false);
+}
+
+static int rtl8366rb_get_vlan_4k(struct realtek_smi *smi, u32 vid,
+ struct rtl8366_vlan_4k *vlan4k)
+{
+ u32 data[3];
+ int ret;
+ int i;
+
+ memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k));
+
+ if (vid >= RTL8366RB_NUM_VIDS)
+ return -EINVAL;
+
+ /* write VID */
+ ret = regmap_write(smi->map, RTL8366RB_VLAN_TABLE_WRITE_BASE,
+ vid & RTL8366RB_VLAN_VID_MASK);
+ if (ret)
+ return ret;
+
+ /* write table access control word */
+ ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
+ RTL8366RB_TABLE_VLAN_READ_CTRL);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = regmap_read(smi->map,
+ RTL8366RB_VLAN_TABLE_READ_BASE + i,
+ &data[i]);
+ if (ret)
+ return ret;
+ }
+
+ vlan4k->vid = vid;
+ vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
+ RTL8366RB_VLAN_UNTAG_MASK;
+ vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
+ vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
+
+ return 0;
+}
+
+static int rtl8366rb_set_vlan_4k(struct realtek_smi *smi,
+ const struct rtl8366_vlan_4k *vlan4k)
+{
+ u32 data[3];
+ int ret;
+ int i;
+
+ if (vlan4k->vid >= RTL8366RB_NUM_VIDS ||
+ vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK ||
+ vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK ||
+ vlan4k->fid > RTL8366RB_FIDMAX)
+ return -EINVAL;
+
+ data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK;
+ data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) |
+ ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
+ RTL8366RB_VLAN_UNTAG_SHIFT);
+ data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK;
+
+ for (i = 0; i < 3; i++) {
+ ret = regmap_write(smi->map,
+ RTL8366RB_VLAN_TABLE_WRITE_BASE + i,
+ data[i]);
+ if (ret)
+ return ret;
+ }
+
+ /* write table access control word */
+ ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
+ RTL8366RB_TABLE_VLAN_WRITE_CTRL);
+
+ return ret;
+}
+
+static int rtl8366rb_get_vlan_mc(struct realtek_smi *smi, u32 index,
+ struct rtl8366_vlan_mc *vlanmc)
+{
+ u32 data[3];
+ int ret;
+ int i;
+
+ memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc));
+
+ if (index >= RTL8366RB_NUM_VLANS)
+ return -EINVAL;
+
+ for (i = 0; i < 3; i++) {
+ ret = regmap_read(smi->map,
+ RTL8366RB_VLAN_MC_BASE(index) + i,
+ &data[i]);
+ if (ret)
+ return ret;
+ }
+
+ vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK;
+ vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) &
+ RTL8366RB_VLAN_PRIORITY_MASK;
+ vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
+ RTL8366RB_VLAN_UNTAG_MASK;
+ vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
+ vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
+
+ return 0;
+}
+
+static int rtl8366rb_set_vlan_mc(struct realtek_smi *smi, u32 index,
+ const struct rtl8366_vlan_mc *vlanmc)
+{
+ u32 data[3];
+ int ret;
+ int i;
+
+ if (index >= RTL8366RB_NUM_VLANS ||
+ vlanmc->vid >= RTL8366RB_NUM_VIDS ||
+ vlanmc->priority > RTL8366RB_PRIORITYMAX ||
+ vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK ||
+ vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK ||
+ vlanmc->fid > RTL8366RB_FIDMAX)
+ return -EINVAL;
+
+ data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) |
+ ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) <<
+ RTL8366RB_VLAN_PRIORITY_SHIFT);
+ data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) |
+ ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
+ RTL8366RB_VLAN_UNTAG_SHIFT);
+ data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK;
+
+ for (i = 0; i < 3; i++) {
+ ret = regmap_write(smi->map,
+ RTL8366RB_VLAN_MC_BASE(index) + i,
+ data[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rtl8366rb_get_mc_index(struct realtek_smi *smi, int port, int *val)
+{
+ u32 data;
+ int ret;
+
+ if (port >= smi->num_ports)
+ return -EINVAL;
+
+ ret = regmap_read(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+ &data);
+ if (ret)
+ return ret;
+
+ *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) &
+ RTL8366RB_PORT_VLAN_CTRL_MASK;
+
+ return 0;
+}
+
+static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index)
+{
+ if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS)
+ return -EINVAL;
+
+ return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+ RTL8366RB_PORT_VLAN_CTRL_MASK <<
+ RTL8366RB_PORT_VLAN_CTRL_SHIFT(port),
+ (index & RTL8366RB_PORT_VLAN_CTRL_MASK) <<
+ RTL8366RB_PORT_VLAN_CTRL_SHIFT(port));
+}
+
+static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
+{
+ unsigned int max = RTL8366RB_NUM_VLANS;
+
+ if (smi->vlan4k_enabled)
+ max = RTL8366RB_NUM_VIDS - 1;
+
+ if (vlan == 0 || vlan >= max)
+ return false;
+
+ return true;
+}
+
+static int rtl8366rb_enable_vlan(struct realtek_smi *smi, bool enable)
+{
+ dev_dbg(smi->dev, "%s VLAN\n", enable ? "enable" : "disable");
+ return regmap_update_bits(smi->map,
+ RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN,
+ enable ? RTL8366RB_SGCR_EN_VLAN : 0);
+}
+
+static int rtl8366rb_enable_vlan4k(struct realtek_smi *smi, bool enable)
+{
+ dev_dbg(smi->dev, "%s VLAN 4k\n", enable ? "enable" : "disable");
+ return regmap_update_bits(smi->map, RTL8366RB_SGCR,
+ RTL8366RB_SGCR_EN_VLAN_4KTB,
+ enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0);
+}
+
+static int rtl8366rb_phy_read(struct realtek_smi *smi, int phy, int regnum)
+{
+ u32 val;
+ u32 reg;
+ int ret;
+
+ if (phy > RTL8366RB_PHY_NO_MAX)
+ return -EINVAL;
+
+ ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG,
+ RTL8366RB_PHY_CTRL_READ);
+ if (ret)
+ return ret;
+
+ reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
+
+ ret = regmap_write(smi->map, reg, 0);
+ if (ret) {
+ dev_err(smi->dev,
+ "failed to write PHY%d reg %04x @ %04x, ret %d\n",
+ phy, regnum, reg, ret);
+ return ret;
+ }
+
+ ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_DATA_REG, &val);
+ if (ret)
+ return ret;
+
+ dev_dbg(smi->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n",
+ phy, regnum, reg, val);
+
+ return val;
+}
+
+static int rtl8366rb_phy_write(struct realtek_smi *smi, int phy, int regnum,
+ u16 val)
+{
+ u32 reg;
+ int ret;
+
+ if (phy > RTL8366RB_PHY_NO_MAX)
+ return -EINVAL;
+
+ ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG,
+ RTL8366RB_PHY_CTRL_WRITE);
+ if (ret)
+ return ret;
+
+ reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
+
+ dev_dbg(smi->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n",
+ phy, regnum, reg, val);
+
+ ret = regmap_write(smi->map, reg, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rtl8366rb_reset_chip(struct realtek_smi *smi)
+{
+ int timeout = 10;
+ u32 val;
+ int ret;
+
+ realtek_smi_write_reg_noack(smi, RTL8366RB_RESET_CTRL_REG,
+ RTL8366RB_CHIP_CTRL_RESET_HW);
+ do {
+ usleep_range(20000, 25000);
+ ret = regmap_read(smi->map, RTL8366RB_RESET_CTRL_REG, &val);
+ if (ret)
+ return ret;
+
+ if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW))
+ break;
+ } while (--timeout);
+
+ if (!timeout) {
+ dev_err(smi->dev, "timeout waiting for the switch to reset\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int rtl8366rb_detect(struct realtek_smi *smi)
+{
+ struct device *dev = smi->dev;
+ int ret;
+ u32 val;
+
+ /* Detect device */
+ ret = regmap_read(smi->map, 0x5c, &val);
+ if (ret) {
+ dev_err(dev, "can't get chip ID (%d)\n", ret);
+ return ret;
+ }
+
+ switch (val) {
+ case 0x6027:
+ dev_info(dev, "found an RTL8366S switch\n");
+ dev_err(dev, "this switch is not yet supported, submit patches!\n");
+ return -ENODEV;
+ case 0x5937:
+ dev_info(dev, "found an RTL8366RB switch\n");
+ smi->cpu_port = RTL8366RB_PORT_NUM_CPU;
+ smi->num_ports = RTL8366RB_NUM_PORTS;
+ smi->num_vlan_mc = RTL8366RB_NUM_VLANS;
+ smi->mib_counters = rtl8366rb_mib_counters;
+ smi->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters);
+ break;
+ default:
+ dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n",
+ val);
+ break;
+ }
+
+ ret = rtl8366rb_reset_chip(smi);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct dsa_switch_ops rtl8366rb_switch_ops = {
+ .get_tag_protocol = rtl8366_get_tag_protocol,
+ .setup = rtl8366rb_setup,
+ .adjust_link = rtl8366rb_adjust_link,
+ .get_strings = rtl8366_get_strings,
+ .get_ethtool_stats = rtl8366_get_ethtool_stats,
+ .get_sset_count = rtl8366_get_sset_count,
+ .port_vlan_filtering = rtl8366_vlan_filtering,
+ .port_vlan_prepare = rtl8366_vlan_prepare,
+ .port_vlan_add = rtl8366_vlan_add,
+ .port_vlan_del = rtl8366_vlan_del,
+ .port_enable = rtl8366rb_port_enable,
+ .port_disable = rtl8366rb_port_disable,
+};
+
+static const struct realtek_smi_ops rtl8366rb_smi_ops = {
+ .detect = rtl8366rb_detect,
+ .get_vlan_mc = rtl8366rb_get_vlan_mc,
+ .set_vlan_mc = rtl8366rb_set_vlan_mc,
+ .get_vlan_4k = rtl8366rb_get_vlan_4k,
+ .set_vlan_4k = rtl8366rb_set_vlan_4k,
+ .get_mc_index = rtl8366rb_get_mc_index,
+ .set_mc_index = rtl8366rb_set_mc_index,
+ .get_mib_counter = rtl8366rb_get_mib_counter,
+ .is_vlan_valid = rtl8366rb_is_vlan_valid,
+ .enable_vlan = rtl8366rb_enable_vlan,
+ .enable_vlan4k = rtl8366rb_enable_vlan4k,
+ .phy_read = rtl8366rb_phy_read,
+ .phy_write = rtl8366rb_phy_write,
+};
+
+const struct realtek_smi_variant rtl8366rb_variant = {
+ .ds_ops = &rtl8366rb_switch_ops,
+ .ops = &rtl8366rb_smi_ops,
+ .clk_delay = 10,
+ .cmd_read = 0xa9,
+ .cmd_write = 0xa8,
+};
+EXPORT_SYMBOL_GPL(rtl8366rb_variant);
diff --git a/drivers/net/dsa/vitesse-vsc73xx.c b/drivers/net/dsa/vitesse-vsc73xx.c
new file mode 100644
index 000000000000..9f1b5f2e8a64
--- /dev/null
+++ b/drivers/net/dsa/vitesse-vsc73xx.c
@@ -0,0 +1,1365 @@
+// SPDX-License-Identifier: GPL-2.0
+/* DSA driver for:
+ * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+ *
+ * These switches have a built-in 8051 CPU and can download and execute a
+ * firmware in this CPU. They can also be configured to use an external CPU
+ * handling the switch in a memory-mapped manner by connecting to that external
+ * CPU's memory bus.
+ *
+ * This driver (currently) only takes control of the switch chip over SPI and
+ * configures it to route packages around when connected to a CPU port. The
+ * chip has embedded PHYs and VLAN support so we model it using DSA.
+ *
+ * Copyright (C) 2018 Linus Wallej <linus.walleij@linaro.org>
+ * Includes portions of code from the firmware uploader by:
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/bitops.h>
+#include <linux/if_bridge.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/random.h>
+#include <net/dsa.h>
+
+#define VSC73XX_BLOCK_MAC 0x1 /* Subblocks 0-4, 6 (CPU port) */
+#define VSC73XX_BLOCK_ANALYZER 0x2 /* Only subblock 0 */
+#define VSC73XX_BLOCK_MII 0x3 /* Subblocks 0 and 1 */
+#define VSC73XX_BLOCK_MEMINIT 0x3 /* Only subblock 2 */
+#define VSC73XX_BLOCK_CAPTURE 0x4 /* Only subblock 2 */
+#define VSC73XX_BLOCK_ARBITER 0x5 /* Only subblock 0 */
+#define VSC73XX_BLOCK_SYSTEM 0x7 /* Only subblock 0 */
+
+#define CPU_PORT 6 /* CPU port */
+
+/* MAC Block registers */
+#define VSC73XX_MAC_CFG 0x00
+#define VSC73XX_MACHDXGAP 0x02
+#define VSC73XX_FCCONF 0x04
+#define VSC73XX_FCMACHI 0x08
+#define VSC73XX_FCMACLO 0x0c
+#define VSC73XX_MAXLEN 0x10
+#define VSC73XX_ADVPORTM 0x19
+#define VSC73XX_TXUPDCFG 0x24
+#define VSC73XX_TXQ_SELECT_CFG 0x28
+#define VSC73XX_RXOCT 0x50
+#define VSC73XX_TXOCT 0x51
+#define VSC73XX_C_RX0 0x52
+#define VSC73XX_C_RX1 0x53
+#define VSC73XX_C_RX2 0x54
+#define VSC73XX_C_TX0 0x55
+#define VSC73XX_C_TX1 0x56
+#define VSC73XX_C_TX2 0x57
+#define VSC73XX_C_CFG 0x58
+#define VSC73XX_CAT_DROP 0x6e
+#define VSC73XX_CAT_PR_MISC_L2 0x6f
+#define VSC73XX_CAT_PR_USR_PRIO 0x75
+#define VSC73XX_Q_MISC_CONF 0xdf
+
+/* MAC_CFG register bits */
+#define VSC73XX_MAC_CFG_WEXC_DIS BIT(31)
+#define VSC73XX_MAC_CFG_PORT_RST BIT(29)
+#define VSC73XX_MAC_CFG_TX_EN BIT(28)
+#define VSC73XX_MAC_CFG_SEED_LOAD BIT(27)
+#define VSC73XX_MAC_CFG_SEED_MASK GENMASK(26, 19)
+#define VSC73XX_MAC_CFG_SEED_OFFSET 19
+#define VSC73XX_MAC_CFG_FDX BIT(18)
+#define VSC73XX_MAC_CFG_GIGA_MODE BIT(17)
+#define VSC73XX_MAC_CFG_RX_EN BIT(16)
+#define VSC73XX_MAC_CFG_VLAN_DBLAWR BIT(15)
+#define VSC73XX_MAC_CFG_VLAN_AWR BIT(14)
+#define VSC73XX_MAC_CFG_100_BASE_T BIT(13) /* Not in manual */
+#define VSC73XX_MAC_CFG_TX_IPG_MASK GENMASK(10, 6)
+#define VSC73XX_MAC_CFG_TX_IPG_OFFSET 6
+#define VSC73XX_MAC_CFG_TX_IPG_1000M (6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
+#define VSC73XX_MAC_CFG_TX_IPG_100_10M (17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
+#define VSC73XX_MAC_CFG_MAC_RX_RST BIT(5)
+#define VSC73XX_MAC_CFG_MAC_TX_RST BIT(4)
+#define VSC73XX_MAC_CFG_CLK_SEL_MASK GENMASK(2, 0)
+#define VSC73XX_MAC_CFG_CLK_SEL_OFFSET 0
+#define VSC73XX_MAC_CFG_CLK_SEL_1000M 1
+#define VSC73XX_MAC_CFG_CLK_SEL_100M 2
+#define VSC73XX_MAC_CFG_CLK_SEL_10M 3
+#define VSC73XX_MAC_CFG_CLK_SEL_EXT 4
+
+#define VSC73XX_MAC_CFG_1000M_F_PHY (VSC73XX_MAC_CFG_FDX | \
+ VSC73XX_MAC_CFG_GIGA_MODE | \
+ VSC73XX_MAC_CFG_TX_IPG_1000M | \
+ VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_100_10M_F_PHY (VSC73XX_MAC_CFG_FDX | \
+ VSC73XX_MAC_CFG_TX_IPG_100_10M | \
+ VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_100_10M_H_PHY (VSC73XX_MAC_CFG_TX_IPG_100_10M | \
+ VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_1000M_F_RGMII (VSC73XX_MAC_CFG_FDX | \
+ VSC73XX_MAC_CFG_GIGA_MODE | \
+ VSC73XX_MAC_CFG_TX_IPG_1000M | \
+ VSC73XX_MAC_CFG_CLK_SEL_1000M)
+#define VSC73XX_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \
+ VSC73XX_MAC_CFG_MAC_RX_RST | \
+ VSC73XX_MAC_CFG_MAC_TX_RST)
+
+/* Flow control register bits */
+#define VSC73XX_FCCONF_ZERO_PAUSE_EN BIT(17)
+#define VSC73XX_FCCONF_FLOW_CTRL_OBEY BIT(16)
+#define VSC73XX_FCCONF_PAUSE_VAL_MASK GENMASK(15, 0)
+
+/* ADVPORTM advanced port setup register bits */
+#define VSC73XX_ADVPORTM_IFG_PPM BIT(7)
+#define VSC73XX_ADVPORTM_EXC_COL_CONT BIT(6)
+#define VSC73XX_ADVPORTM_EXT_PORT BIT(5)
+#define VSC73XX_ADVPORTM_INV_GTX BIT(4)
+#define VSC73XX_ADVPORTM_ENA_GTX BIT(3)
+#define VSC73XX_ADVPORTM_DDR_MODE BIT(2)
+#define VSC73XX_ADVPORTM_IO_LOOPBACK BIT(1)
+#define VSC73XX_ADVPORTM_HOST_LOOPBACK BIT(0)
+
+/* CAT_DROP categorizer frame dropping register bits */
+#define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA BIT(6)
+#define VSC73XX_CAT_DROP_FWD_CTRL_ENA BIT(4)
+#define VSC73XX_CAT_DROP_FWD_PAUSE_ENA BIT(3)
+#define VSC73XX_CAT_DROP_UNTAGGED_ENA BIT(2)
+#define VSC73XX_CAT_DROP_TAGGED_ENA BIT(1)
+#define VSC73XX_CAT_DROP_NULL_MAC_ENA BIT(0)
+
+#define VSC73XX_Q_MISC_CONF_EXTENT_MEM BIT(31)
+#define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK GENMASK(4, 1)
+#define VSC73XX_Q_MISC_CONF_EARLY_TX_512 (1 << 1)
+#define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE BIT(0)
+
+/* Frame analyzer block 2 registers */
+#define VSC73XX_STORMLIMIT 0x02
+#define VSC73XX_ADVLEARN 0x03
+#define VSC73XX_IFLODMSK 0x04
+#define VSC73XX_VLANMASK 0x05
+#define VSC73XX_MACHDATA 0x06
+#define VSC73XX_MACLDATA 0x07
+#define VSC73XX_ANMOVED 0x08
+#define VSC73XX_ANAGEFIL 0x09
+#define VSC73XX_ANEVENTS 0x0a
+#define VSC73XX_ANCNTMASK 0x0b
+#define VSC73XX_ANCNTVAL 0x0c
+#define VSC73XX_LEARNMASK 0x0d
+#define VSC73XX_UFLODMASK 0x0e
+#define VSC73XX_MFLODMASK 0x0f
+#define VSC73XX_RECVMASK 0x10
+#define VSC73XX_AGGRCTRL 0x20
+#define VSC73XX_AGGRMSKS 0x30 /* Until 0x3f */
+#define VSC73XX_DSTMASKS 0x40 /* Until 0x7f */
+#define VSC73XX_SRCMASKS 0x80 /* Until 0x87 */
+#define VSC73XX_CAPENAB 0xa0
+#define VSC73XX_MACACCESS 0xb0
+#define VSC73XX_IPMCACCESS 0xb1
+#define VSC73XX_MACTINDX 0xc0
+#define VSC73XX_VLANACCESS 0xd0
+#define VSC73XX_VLANTIDX 0xe0
+#define VSC73XX_AGENCTRL 0xf0
+#define VSC73XX_CAPRST 0xff
+
+#define VSC73XX_MACACCESS_CPU_COPY BIT(14)
+#define VSC73XX_MACACCESS_FWD_KILL BIT(13)
+#define VSC73XX_MACACCESS_IGNORE_VLAN BIT(12)
+#define VSC73XX_MACACCESS_AGED_FLAG BIT(11)
+#define VSC73XX_MACACCESS_VALID BIT(10)
+#define VSC73XX_MACACCESS_LOCKED BIT(9)
+#define VSC73XX_MACACCESS_DEST_IDX_MASK GENMASK(8, 3)
+#define VSC73XX_MACACCESS_CMD_MASK GENMASK(2, 0)
+#define VSC73XX_MACACCESS_CMD_IDLE 0
+#define VSC73XX_MACACCESS_CMD_LEARN 1
+#define VSC73XX_MACACCESS_CMD_FORGET 2
+#define VSC73XX_MACACCESS_CMD_AGE_TABLE 3
+#define VSC73XX_MACACCESS_CMD_FLUSH_TABLE 4
+#define VSC73XX_MACACCESS_CMD_CLEAR_TABLE 5
+#define VSC73XX_MACACCESS_CMD_READ_ENTRY 6
+#define VSC73XX_MACACCESS_CMD_WRITE_ENTRY 7
+
+#define VSC73XX_VLANACCESS_LEARN_DISABLED BIT(30)
+#define VSC73XX_VLANACCESS_VLAN_MIRROR BIT(29)
+#define VSC73XX_VLANACCESS_VLAN_SRC_CHECK BIT(28)
+#define VSC73XX_VLANACCESS_VLAN_PORT_MASK GENMASK(9, 2)
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(2, 0)
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE 0
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY 1
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY 2
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE 3
+
+/* MII block 3 registers */
+#define VSC73XX_MII_STAT 0x0
+#define VSC73XX_MII_CMD 0x1
+#define VSC73XX_MII_DATA 0x2
+
+/* Arbiter block 5 registers */
+#define VSC73XX_ARBEMPTY 0x0c
+#define VSC73XX_ARBDISC 0x0e
+#define VSC73XX_SBACKWDROP 0x12
+#define VSC73XX_DBACKWDROP 0x13
+#define VSC73XX_ARBBURSTPROB 0x15
+
+/* System block 7 registers */
+#define VSC73XX_ICPU_SIPAD 0x01
+#define VSC73XX_GMIIDELAY 0x05
+#define VSC73XX_ICPU_CTRL 0x10
+#define VSC73XX_ICPU_ADDR 0x11
+#define VSC73XX_ICPU_SRAM 0x12
+#define VSC73XX_HWSEM 0x13
+#define VSC73XX_GLORESET 0x14
+#define VSC73XX_ICPU_MBOX_VAL 0x15
+#define VSC73XX_ICPU_MBOX_SET 0x16
+#define VSC73XX_ICPU_MBOX_CLR 0x17
+#define VSC73XX_CHIPID 0x18
+#define VSC73XX_GPIO 0x34
+
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE 0
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS 1
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS 2
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS 3
+
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE (0 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS (1 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS (2 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS (3 << 4)
+
+#define VSC73XX_ICPU_CTRL_WATCHDOG_RST BIT(31)
+#define VSC73XX_ICPU_CTRL_CLK_DIV_MASK GENMASK(12, 8)
+#define VSC73XX_ICPU_CTRL_SRST_HOLD BIT(7)
+#define VSC73XX_ICPU_CTRL_ICPU_PI_EN BIT(6)
+#define VSC73XX_ICPU_CTRL_BOOT_EN BIT(3)
+#define VSC73XX_ICPU_CTRL_EXT_ACC_EN BIT(2)
+#define VSC73XX_ICPU_CTRL_CLK_EN BIT(1)
+#define VSC73XX_ICPU_CTRL_SRST BIT(0)
+
+#define VSC73XX_CHIPID_ID_SHIFT 12
+#define VSC73XX_CHIPID_ID_MASK 0xffff
+#define VSC73XX_CHIPID_REV_SHIFT 28
+#define VSC73XX_CHIPID_REV_MASK 0xf
+#define VSC73XX_CHIPID_ID_7385 0x7385
+#define VSC73XX_CHIPID_ID_7388 0x7388
+#define VSC73XX_CHIPID_ID_7395 0x7395
+#define VSC73XX_CHIPID_ID_7398 0x7398
+
+#define VSC73XX_GLORESET_STROBE BIT(4)
+#define VSC73XX_GLORESET_ICPU_LOCK BIT(3)
+#define VSC73XX_GLORESET_MEM_LOCK BIT(2)
+#define VSC73XX_GLORESET_PHY_RESET BIT(1)
+#define VSC73XX_GLORESET_MASTER_RESET BIT(0)
+
+#define VSC73XX_CMD_MODE_READ 0
+#define VSC73XX_CMD_MODE_WRITE 1
+#define VSC73XX_CMD_MODE_SHIFT 4
+#define VSC73XX_CMD_BLOCK_SHIFT 5
+#define VSC73XX_CMD_BLOCK_MASK 0x7
+#define VSC73XX_CMD_SUBBLOCK_MASK 0xf
+
+#define VSC7385_CLOCK_DELAY ((3 << 4) | 3)
+#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3)
+
+#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \
+ VSC73XX_ICPU_CTRL_BOOT_EN | \
+ VSC73XX_ICPU_CTRL_EXT_ACC_EN)
+
+#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \
+ VSC73XX_ICPU_CTRL_BOOT_EN | \
+ VSC73XX_ICPU_CTRL_CLK_EN | \
+ VSC73XX_ICPU_CTRL_SRST)
+
+/**
+ * struct vsc73xx - VSC73xx state container
+ */
+struct vsc73xx {
+ struct device *dev;
+ struct gpio_desc *reset;
+ struct spi_device *spi;
+ struct dsa_switch *ds;
+ struct gpio_chip gc;
+ u16 chipid;
+ u8 addr[ETH_ALEN];
+ struct mutex lock; /* Protects SPI traffic */
+};
+
+#define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385)
+#define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388)
+#define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395)
+#define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398)
+#define IS_739X(a) (IS_7395(a) || IS_7398(a))
+
+struct vsc73xx_counter {
+ u8 counter;
+ const char *name;
+};
+
+/* Counters are named according to the MIB standards where applicable.
+ * Some counters are custom, non-standard. The standard counters are
+ * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex
+ * 30A Counters.
+ */
+static const struct vsc73xx_counter vsc73xx_rx_counters[] = {
+ { 0, "RxEtherStatsPkts" },
+ { 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */
+ { 2, "RxTotalErrorPackets" }, /* non-standard counter */
+ { 3, "RxEtherStatsBroadcastPkts" },
+ { 4, "RxEtherStatsMulticastPkts" },
+ { 5, "RxEtherStatsPkts64Octets" },
+ { 6, "RxEtherStatsPkts65to127Octets" },
+ { 7, "RxEtherStatsPkts128to255Octets" },
+ { 8, "RxEtherStatsPkts256to511Octets" },
+ { 9, "RxEtherStatsPkts512to1023Octets" },
+ { 10, "RxEtherStatsPkts1024to1518Octets" },
+ { 11, "RxJumboFrames" }, /* non-standard counter */
+ { 12, "RxaPauseMACControlFramesTransmitted" },
+ { 13, "RxFIFODrops" }, /* non-standard counter */
+ { 14, "RxBackwardDrops" }, /* non-standard counter */
+ { 15, "RxClassifierDrops" }, /* non-standard counter */
+ { 16, "RxEtherStatsCRCAlignErrors" },
+ { 17, "RxEtherStatsUndersizePkts" },
+ { 18, "RxEtherStatsOversizePkts" },
+ { 19, "RxEtherStatsFragments" },
+ { 20, "RxEtherStatsJabbers" },
+ { 21, "RxaMACControlFramesReceived" },
+ /* 22-24 are undefined */
+ { 25, "RxaFramesReceivedOK" },
+ { 26, "RxQoSClass0" }, /* non-standard counter */
+ { 27, "RxQoSClass1" }, /* non-standard counter */
+ { 28, "RxQoSClass2" }, /* non-standard counter */
+ { 29, "RxQoSClass3" }, /* non-standard counter */
+};
+
+static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
+ { 0, "TxEtherStatsPkts" },
+ { 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */
+ { 2, "TxTotalErrorPackets" }, /* non-standard counter */
+ { 3, "TxEtherStatsBroadcastPkts" },
+ { 4, "TxEtherStatsMulticastPkts" },
+ { 5, "TxEtherStatsPkts64Octets" },
+ { 6, "TxEtherStatsPkts65to127Octets" },
+ { 7, "TxEtherStatsPkts128to255Octets" },
+ { 8, "TxEtherStatsPkts256to511Octets" },
+ { 9, "TxEtherStatsPkts512to1023Octets" },
+ { 10, "TxEtherStatsPkts1024to1518Octets" },
+ { 11, "TxJumboFrames" }, /* non-standard counter */
+ { 12, "TxaPauseMACControlFramesTransmitted" },
+ { 13, "TxFIFODrops" }, /* non-standard counter */
+ { 14, "TxDrops" }, /* non-standard counter */
+ { 15, "TxEtherStatsCollisions" },
+ { 16, "TxEtherStatsCRCAlignErrors" },
+ { 17, "TxEtherStatsUndersizePkts" },
+ { 18, "TxEtherStatsOversizePkts" },
+ { 19, "TxEtherStatsFragments" },
+ { 20, "TxEtherStatsJabbers" },
+ /* 21-24 are undefined */
+ { 25, "TxaFramesReceivedOK" },
+ { 26, "TxQoSClass0" }, /* non-standard counter */
+ { 27, "TxQoSClass1" }, /* non-standard counter */
+ { 28, "TxQoSClass2" }, /* non-standard counter */
+ { 29, "TxQoSClass3" }, /* non-standard counter */
+};
+
+static int vsc73xx_is_addr_valid(u8 block, u8 subblock)
+{
+ switch (block) {
+ case VSC73XX_BLOCK_MAC:
+ switch (subblock) {
+ case 0 ... 4:
+ case 6:
+ return 1;
+ }
+ break;
+
+ case VSC73XX_BLOCK_ANALYZER:
+ case VSC73XX_BLOCK_SYSTEM:
+ switch (subblock) {
+ case 0:
+ return 1;
+ }
+ break;
+
+ case VSC73XX_BLOCK_MII:
+ case VSC73XX_BLOCK_CAPTURE:
+ case VSC73XX_BLOCK_ARBITER:
+ switch (subblock) {
+ case 0 ... 1:
+ return 1;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static u8 vsc73xx_make_addr(u8 mode, u8 block, u8 subblock)
+{
+ u8 ret;
+
+ ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT;
+ ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT;
+ ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK;
+
+ return ret;
+}
+
+static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+ u32 *val)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u8 cmd[4];
+ u8 buf[4];
+ int ret;
+
+ if (!vsc73xx_is_addr_valid(block, subblock))
+ return -EINVAL;
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = sizeof(buf);
+ spi_message_add_tail(&t[1], &m);
+
+ cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_READ, block, subblock);
+ cmd[1] = reg;
+ cmd[2] = 0;
+ cmd[3] = 0;
+
+ mutex_lock(&vsc->lock);
+ ret = spi_sync(vsc->spi, &m);
+ mutex_unlock(&vsc->lock);
+
+ if (ret)
+ return ret;
+
+ *val = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
+
+ return 0;
+}
+
+static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+ u32 val)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u8 cmd[2];
+ u8 buf[4];
+ int ret;
+
+ if (!vsc73xx_is_addr_valid(block, subblock))
+ return -EINVAL;
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = sizeof(buf);
+ spi_message_add_tail(&t[1], &m);
+
+ cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock);
+ cmd[1] = reg;
+
+ buf[0] = (val >> 24) & 0xff;
+ buf[1] = (val >> 16) & 0xff;
+ buf[2] = (val >> 8) & 0xff;
+ buf[3] = val & 0xff;
+
+ mutex_lock(&vsc->lock);
+ ret = spi_sync(vsc->spi, &m);
+ mutex_unlock(&vsc->lock);
+
+ return ret;
+}
+
+static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock,
+ u8 reg, u32 mask, u32 val)
+{
+ u32 tmp, orig;
+ int ret;
+
+ /* Same read-modify-write algorithm as e.g. regmap */
+ ret = vsc73xx_read(vsc, block, subblock, reg, &orig);
+ if (ret)
+ return ret;
+ tmp = orig & ~mask;
+ tmp |= val & mask;
+ return vsc73xx_write(vsc, block, subblock, reg, tmp);
+}
+
+static int vsc73xx_detect(struct vsc73xx *vsc)
+{
+ bool icpu_si_boot_en;
+ bool icpu_pi_en;
+ u32 val;
+ u32 rev;
+ int ret;
+ u32 id;
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_MBOX_VAL, &val);
+ if (ret) {
+ dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret);
+ return ret;
+ }
+
+ if (val == 0xffffffff) {
+ dev_info(vsc->dev, "chip seems dead, assert reset\n");
+ gpiod_set_value_cansleep(vsc->reset, 1);
+ /* Reset pulse should be 20ns minimum, according to datasheet
+ * table 245, so 10us should be fine
+ */
+ usleep_range(10, 100);
+ gpiod_set_value_cansleep(vsc->reset, 0);
+ /* Wait 20ms according to datasheet table 245 */
+ msleep(20);
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_MBOX_VAL, &val);
+ if (val == 0xffffffff) {
+ dev_err(vsc->dev, "seems not to help, giving up\n");
+ return -ENODEV;
+ }
+ }
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_CHIPID, &val);
+ if (ret) {
+ dev_err(vsc->dev, "unable to read chip id (%d)\n", ret);
+ return ret;
+ }
+
+ id = (val >> VSC73XX_CHIPID_ID_SHIFT) &
+ VSC73XX_CHIPID_ID_MASK;
+ switch (id) {
+ case VSC73XX_CHIPID_ID_7385:
+ case VSC73XX_CHIPID_ID_7388:
+ case VSC73XX_CHIPID_ID_7395:
+ case VSC73XX_CHIPID_ID_7398:
+ break;
+ default:
+ dev_err(vsc->dev, "unsupported chip, id=%04x\n", id);
+ return -ENODEV;
+ }
+
+ vsc->chipid = id;
+ rev = (val >> VSC73XX_CHIPID_REV_SHIFT) &
+ VSC73XX_CHIPID_REV_MASK;
+ dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev);
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_CTRL, &val);
+ if (ret) {
+ dev_err(vsc->dev, "unable to read iCPU control\n");
+ return ret;
+ }
+
+ /* The iCPU can always be used but can boot in different ways.
+ * If it is initially disabled and has no external memory,
+ * we are in control and can do whatever we like, else we
+ * are probably in trouble (we need some way to communicate
+ * with the running firmware) so we bail out for now.
+ */
+ icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN);
+ icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN);
+ if (icpu_si_boot_en && icpu_pi_en) {
+ dev_err(vsc->dev,
+ "iCPU enabled boots from SI, has external memory\n");
+ dev_err(vsc->dev, "no idea how to deal with this\n");
+ return -ENODEV;
+ }
+ if (icpu_si_boot_en && !icpu_pi_en) {
+ dev_err(vsc->dev,
+ "iCPU enabled boots from SI, no external memory\n");
+ dev_err(vsc->dev, "no idea how to deal with this\n");
+ return -ENODEV;
+ }
+ if (!icpu_si_boot_en && icpu_pi_en) {
+ dev_err(vsc->dev,
+ "iCPU enabled, boots from PI external memory\n");
+ dev_err(vsc->dev, "no idea how to deal with this\n");
+ return -ENODEV;
+ }
+ /* !icpu_si_boot_en && !cpu_pi_en */
+ dev_info(vsc->dev, "iCPU disabled, no external memory\n");
+
+ return 0;
+}
+
+static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+ struct vsc73xx *vsc = ds->priv;
+ u32 cmd;
+ u32 val;
+ int ret;
+
+ /* Setting bit 26 means "read" */
+ cmd = BIT(26) | (phy << 21) | (regnum << 16);
+ ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
+ if (ret)
+ return ret;
+ msleep(2);
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val);
+ if (ret)
+ return ret;
+ if (val & BIT(16)) {
+ dev_err(vsc->dev, "reading reg %02x from phy%d failed\n",
+ regnum, phy);
+ return -EIO;
+ }
+ val &= 0xFFFFU;
+
+ dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n",
+ regnum, phy, val);
+
+ return val;
+}
+
+static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum,
+ u16 val)
+{
+ struct vsc73xx *vsc = ds->priv;
+ u32 cmd;
+ int ret;
+
+ /* It was found through tedious experiments that this router
+ * chip really hates to have it's PHYs reset. They
+ * never recover if that happens: autonegotiation stops
+ * working after a reset. Just filter out this command.
+ * (Resetting the whole chip is OK.)
+ */
+ if (regnum == 0 && (val & BIT(15))) {
+ dev_info(vsc->dev, "reset PHY - disallowed\n");
+ return 0;
+ }
+
+ cmd = (phy << 21) | (regnum << 16);
+ ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
+ if (ret)
+ return ret;
+
+ dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n",
+ val, regnum, phy);
+ return 0;
+}
+
+static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
+ int port)
+{
+ /* The switch internally uses a 8 byte header with length,
+ * source port, tag, LPA and priority. This is supposedly
+ * only accessible when operating the switch using the internal
+ * CPU or with an external CPU mapping the device in, but not
+ * when operating the switch over SPI and putting frames in/out
+ * on port 6 (the CPU port). So far we must assume that we
+ * cannot access the tag. (See "Internal frame header" section
+ * 3.9.1 in the manual.)
+ */
+ return DSA_TAG_PROTO_NONE;
+}
+
+static int vsc73xx_setup(struct dsa_switch *ds)
+{
+ struct vsc73xx *vsc = ds->priv;
+ int i;
+
+ dev_info(vsc->dev, "set up the switch\n");
+
+ /* Issue RESET */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
+ VSC73XX_GLORESET_MASTER_RESET);
+ usleep_range(125, 200);
+
+ /* Initialize memory, initialize RAM bank 0..15 except 6 and 7
+ * This sequence appears in the
+ * VSC7385 SparX-G5 datasheet section 6.6.1
+ * VSC7395 SparX-G5e datasheet section 6.6.1
+ * "initialization sequence".
+ * No explanation is given to the 0x1010400 magic number.
+ */
+ for (i = 0; i <= 15; i++) {
+ if (i != 6 && i != 7) {
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
+ 2,
+ 0, 0x1010400 + i);
+ mdelay(1);
+ }
+ }
+ mdelay(30);
+
+ /* Clear MAC table */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_MACACCESS,
+ VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
+
+ /* Clear VLAN table */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_VLANACCESS,
+ VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
+
+ msleep(40);
+
+ /* Use 20KiB buffers on all ports on VSC7395
+ * The VSC7385 has 16KiB buffers and that is the
+ * default if we don't set this up explicitly.
+ * Port "31" is "all ports".
+ */
+ if (IS_739X(vsc))
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
+ VSC73XX_Q_MISC_CONF,
+ VSC73XX_Q_MISC_CONF_EXTENT_MEM);
+
+ /* Put all ports into reset until enabled */
+ for (i = 0; i < 7; i++) {
+ if (i == 5)
+ continue;
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
+ VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
+ }
+
+ /* MII delay, set both GTX and RX delay to 2 ns */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
+ VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
+ VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
+ /* Enable reception of frames on all ports */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
+ 0x5f);
+ /* IP multicast flood mask (table 144) */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
+ 0xff);
+
+ mdelay(50);
+
+ /* Release reset from the internal PHYs */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
+ VSC73XX_GLORESET_PHY_RESET);
+
+ udelay(4);
+
+ return 0;
+}
+
+static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
+{
+ u32 val;
+
+ /* MAC configure, first reset the port and then write defaults */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_MAC_CFG,
+ VSC73XX_MAC_CFG_RESET);
+
+ /* Take up the port in 1Gbit mode by default, this will be
+ * augmented after auto-negotiation on the PHY-facing
+ * ports.
+ */
+ if (port == CPU_PORT)
+ val = VSC73XX_MAC_CFG_1000M_F_RGMII;
+ else
+ val = VSC73XX_MAC_CFG_1000M_F_PHY;
+
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_MAC_CFG,
+ val |
+ VSC73XX_MAC_CFG_TX_EN |
+ VSC73XX_MAC_CFG_RX_EN);
+
+ /* Max length, we can do up to 9.6 KiB, so allow that.
+ * According to application not "VSC7398 Jumbo Frames" setting
+ * up the MTU to 9.6 KB does not affect the performance on standard
+ * frames, so just enable it. It is clear from the application note
+ * that "9.6 kilobytes" == 9600 bytes.
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_MAXLEN, 9600);
+
+ /* Flow control for the CPU port:
+ * Use a zero delay pause frame when pause condition is left
+ * Obey pause control frames
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_FCCONF,
+ VSC73XX_FCCONF_ZERO_PAUSE_EN |
+ VSC73XX_FCCONF_FLOW_CTRL_OBEY);
+
+ /* Issue pause control frames on PHY facing ports.
+ * Allow early initiation of MAC transmission if the amount
+ * of egress data is below 512 bytes on CPU port.
+ * FIXME: enable 20KiB buffers?
+ */
+ if (port == CPU_PORT)
+ val = VSC73XX_Q_MISC_CONF_EARLY_TX_512;
+ else
+ val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE;
+ val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM;
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_Q_MISC_CONF,
+ val);
+
+ /* Flow control MAC: a MAC address used in flow control frames */
+ val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]);
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_FCMACHI,
+ val);
+ val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]);
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_FCMACLO,
+ val);
+
+ /* Tell the categorizer to forward pause frames, not control
+ * frame. Do not drop anything.
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_CAT_DROP,
+ VSC73XX_CAT_DROP_FWD_PAUSE_ENA);
+
+ /* Clear all counters */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port, VSC73XX_C_RX0, 0);
+}
+
+static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
+ int port, struct phy_device *phydev,
+ u32 initval)
+{
+ u32 val = initval;
+ u8 seed;
+
+ /* Reset this port FIXME: break out subroutine */
+ val |= VSC73XX_MAC_CFG_RESET;
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+
+ /* Seed the port randomness with randomness */
+ get_random_bytes(&seed, 1);
+ val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
+ val |= VSC73XX_MAC_CFG_SEED_LOAD;
+ val |= VSC73XX_MAC_CFG_WEXC_DIS;
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+
+ /* Flow control for the PHY facing ports:
+ * Use a zero delay pause frame when pause condition is left
+ * Obey pause control frames
+ * When generating pause frames, use 0xff as pause value
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
+ VSC73XX_FCCONF_ZERO_PAUSE_EN |
+ VSC73XX_FCCONF_FLOW_CTRL_OBEY |
+ 0xff);
+
+ /* Disallow backward dropping of frames from this port */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_SBACKWDROP, BIT(port), 0);
+
+ /* Enable TX, RX, deassert reset, stop loading seed */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_MAC_CFG,
+ VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
+ VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
+ VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
+}
+
+static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct vsc73xx *vsc = ds->priv;
+ u32 val;
+
+ /* Special handling of the CPU-facing port */
+ if (port == CPU_PORT) {
+ /* Other ports are already initialized but not this one */
+ vsc73xx_init_port(vsc, CPU_PORT);
+ /* Select the external port for this interface (EXT_PORT)
+ * Enable the GMII GTX external clock
+ * Use double data rate (DDR mode)
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ CPU_PORT,
+ VSC73XX_ADVPORTM,
+ VSC73XX_ADVPORTM_EXT_PORT |
+ VSC73XX_ADVPORTM_ENA_GTX |
+ VSC73XX_ADVPORTM_DDR_MODE);
+ }
+
+ /* This is the MAC confiuration that always need to happen
+ * after a PHY or the CPU port comes up or down.
+ */
+ if (!phydev->link) {
+ int maxloop = 10;
+
+ dev_dbg(vsc->dev, "port %d: went down\n",
+ port);
+
+ /* Disable RX on this port */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_MAC_CFG,
+ VSC73XX_MAC_CFG_RX_EN, 0);
+
+ /* Discard packets */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_ARBDISC, BIT(port), BIT(port));
+
+ /* Wait until queue is empty */
+ vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_ARBEMPTY, &val);
+ while (!(val & BIT(port))) {
+ msleep(1);
+ vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_ARBEMPTY, &val);
+ if (--maxloop == 0) {
+ dev_err(vsc->dev,
+ "timeout waiting for block arbiter\n");
+ /* Continue anyway */
+ break;
+ }
+ }
+
+ /* Put this port into reset */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
+ VSC73XX_MAC_CFG_RESET);
+
+ /* Accept packets again */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_ARBDISC, BIT(port), 0);
+
+ /* Allow backward dropping of frames from this port */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_SBACKWDROP, BIT(port), BIT(port));
+
+ /* Receive mask (disable forwarding) */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_RECVMASK, BIT(port), 0);
+
+ return;
+ }
+
+ /* Figure out what speed was negotiated */
+ if (phydev->speed == SPEED_1000) {
+ dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
+ port);
+
+ /* Set up default for internal port or external RGMII */
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ val = VSC73XX_MAC_CFG_1000M_F_RGMII;
+ else
+ val = VSC73XX_MAC_CFG_1000M_F_PHY;
+ vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+ } else if (phydev->speed == SPEED_100) {
+ if (phydev->duplex == DUPLEX_FULL) {
+ val = VSC73XX_MAC_CFG_100_10M_F_PHY;
+ dev_dbg(vsc->dev,
+ "port %d: 100 Mbit full duplex mode\n",
+ port);
+ } else {
+ val = VSC73XX_MAC_CFG_100_10M_H_PHY;
+ dev_dbg(vsc->dev,
+ "port %d: 100 Mbit half duplex mode\n",
+ port);
+ }
+ vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+ } else if (phydev->speed == SPEED_10) {
+ if (phydev->duplex == DUPLEX_FULL) {
+ val = VSC73XX_MAC_CFG_100_10M_F_PHY;
+ dev_dbg(vsc->dev,
+ "port %d: 10 Mbit full duplex mode\n",
+ port);
+ } else {
+ val = VSC73XX_MAC_CFG_100_10M_H_PHY;
+ dev_dbg(vsc->dev,
+ "port %d: 10 Mbit half duplex mode\n",
+ port);
+ }
+ vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+ } else {
+ dev_err(vsc->dev,
+ "could not adjust link: unknown speed\n");
+ }
+
+ /* Enable port (forwarding) in the receieve mask */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_RECVMASK, BIT(port), BIT(port));
+}
+
+static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct vsc73xx *vsc = ds->priv;
+
+ dev_info(vsc->dev, "enable port %d\n", port);
+ vsc73xx_init_port(vsc, port);
+
+ return 0;
+}
+
+static void vsc73xx_port_disable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct vsc73xx *vsc = ds->priv;
+
+ /* Just put the port into reset */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
+}
+
+static const struct vsc73xx_counter *
+vsc73xx_find_counter(struct vsc73xx *vsc,
+ u8 counter,
+ bool tx)
+{
+ const struct vsc73xx_counter *cnts;
+ int num_cnts;
+ int i;
+
+ if (tx) {
+ cnts = vsc73xx_tx_counters;
+ num_cnts = ARRAY_SIZE(vsc73xx_tx_counters);
+ } else {
+ cnts = vsc73xx_rx_counters;
+ num_cnts = ARRAY_SIZE(vsc73xx_rx_counters);
+ }
+
+ for (i = 0; i < num_cnts; i++) {
+ const struct vsc73xx_counter *cnt;
+
+ cnt = &cnts[i];
+ if (cnt->counter == counter)
+ return cnt;
+ }
+
+ return NULL;
+}
+
+static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ const struct vsc73xx_counter *cnt;
+ struct vsc73xx *vsc = ds->priv;
+ u8 indices[6];
+ int i, j;
+ u32 val;
+ int ret;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_C_CFG, &val);
+ if (ret)
+ return;
+
+ indices[0] = (val & 0x1f); /* RX counter 0 */
+ indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */
+ indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */
+ indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */
+ indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */
+ indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */
+
+ /* The first counters is the RX octets */
+ j = 0;
+ strncpy(data + j * ETH_GSTRING_LEN,
+ "RxEtherStatsOctets", ETH_GSTRING_LEN);
+ j++;
+
+ /* Each port supports recording 3 RX counters and 3 TX counters,
+ * figure out what counters we use in this set-up and return the
+ * names of them. The hardware default counters will be number of
+ * packets on RX/TX, combined broadcast+multicast packets RX/TX and
+ * total error packets RX/TX.
+ */
+ for (i = 0; i < 3; i++) {
+ cnt = vsc73xx_find_counter(vsc, indices[i], false);
+ if (cnt)
+ strncpy(data + j * ETH_GSTRING_LEN,
+ cnt->name, ETH_GSTRING_LEN);
+ j++;
+ }
+
+ /* TX stats begins with the number of TX octets */
+ strncpy(data + j * ETH_GSTRING_LEN,
+ "TxEtherStatsOctets", ETH_GSTRING_LEN);
+ j++;
+
+ for (i = 3; i < 6; i++) {
+ cnt = vsc73xx_find_counter(vsc, indices[i], true);
+ if (cnt)
+ strncpy(data + j * ETH_GSTRING_LEN,
+ cnt->name, ETH_GSTRING_LEN);
+ j++;
+ }
+}
+
+static int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ /* We only support SS_STATS */
+ if (sset != ETH_SS_STATS)
+ return 0;
+ /* RX and TX packets, then 3 RX counters, 3 TX counters */
+ return 8;
+}
+
+static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data)
+{
+ struct vsc73xx *vsc = ds->priv;
+ u8 regs[] = {
+ VSC73XX_RXOCT,
+ VSC73XX_C_RX0,
+ VSC73XX_C_RX1,
+ VSC73XX_C_RX2,
+ VSC73XX_TXOCT,
+ VSC73XX_C_TX0,
+ VSC73XX_C_TX1,
+ VSC73XX_C_TX2,
+ };
+ u32 val;
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
+ regs[i], &val);
+ if (ret) {
+ dev_err(vsc->dev, "error reading counter %d\n", i);
+ return;
+ }
+ data[i] = val;
+ }
+}
+
+static const struct dsa_switch_ops vsc73xx_ds_ops = {
+ .get_tag_protocol = vsc73xx_get_tag_protocol,
+ .setup = vsc73xx_setup,
+ .phy_read = vsc73xx_phy_read,
+ .phy_write = vsc73xx_phy_write,
+ .adjust_link = vsc73xx_adjust_link,
+ .get_strings = vsc73xx_get_strings,
+ .get_ethtool_stats = vsc73xx_get_ethtool_stats,
+ .get_sset_count = vsc73xx_get_sset_count,
+ .port_enable = vsc73xx_port_enable,
+ .port_disable = vsc73xx_port_disable,
+};
+
+static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+ u32 val;
+ int ret;
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & BIT(offset));
+}
+
+static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int val)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+ u32 tmp = val ? BIT(offset) : 0;
+
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, BIT(offset), tmp);
+}
+
+static int vsc73xx_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int val)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+ u32 tmp = val ? BIT(offset) : 0;
+
+ return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, BIT(offset + 4) | BIT(offset),
+ BIT(offset + 4) | tmp);
+}
+
+static int vsc73xx_gpio_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+
+ return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, BIT(offset + 4),
+ 0);
+}
+
+static int vsc73xx_gpio_get_direction(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+ u32 val;
+ int ret;
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, &val);
+ if (ret)
+ return ret;
+
+ return !(val & BIT(offset + 4));
+}
+
+static int vsc73xx_gpio_probe(struct vsc73xx *vsc)
+{
+ int ret;
+
+ vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x",
+ vsc->chipid);
+ vsc->gc.ngpio = 4;
+ vsc->gc.owner = THIS_MODULE;
+ vsc->gc.parent = vsc->dev;
+ vsc->gc.of_node = vsc->dev->of_node;
+ vsc->gc.base = -1;
+ vsc->gc.get = vsc73xx_gpio_get;
+ vsc->gc.set = vsc73xx_gpio_set;
+ vsc->gc.direction_input = vsc73xx_gpio_direction_input;
+ vsc->gc.direction_output = vsc73xx_gpio_direction_output;
+ vsc->gc.get_direction = vsc73xx_gpio_get_direction;
+ vsc->gc.can_sleep = true;
+ ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc);
+ if (ret) {
+ dev_err(vsc->dev, "unable to register GPIO chip\n");
+ return ret;
+ }
+ return 0;
+}
+
+static int vsc73xx_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct vsc73xx *vsc;
+ int ret;
+
+ vsc = devm_kzalloc(dev, sizeof(*vsc), GFP_KERNEL);
+ if (!vsc)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, vsc);
+ vsc->spi = spi_dev_get(spi);
+ vsc->dev = dev;
+ mutex_init(&vsc->lock);
+
+ /* Release reset, if any */
+ vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(vsc->reset)) {
+ dev_err(dev, "failed to get RESET GPIO\n");
+ return PTR_ERR(vsc->reset);
+ }
+ if (vsc->reset)
+ /* Wait 20ms according to datasheet table 245 */
+ msleep(20);
+
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(dev, "spi setup failed.\n");
+ return ret;
+ }
+
+ ret = vsc73xx_detect(vsc);
+ if (ret) {
+ dev_err(dev, "no chip found (%d)\n", ret);
+ return -ENODEV;
+ }
+
+ eth_random_addr(vsc->addr);
+ dev_info(vsc->dev,
+ "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ vsc->addr[0], vsc->addr[1], vsc->addr[2],
+ vsc->addr[3], vsc->addr[4], vsc->addr[5]);
+
+ /* The VSC7395 switch chips have 5+1 ports which means 5
+ * ordinary ports and a sixth CPU port facing the processor
+ * with an RGMII interface. These ports are numbered 0..4
+ * and 6, so they leave a "hole" in the port map for port 5,
+ * which is invalid.
+ *
+ * The VSC7398 has 8 ports, port 7 is again the CPU port.
+ *
+ * We allocate 8 ports and avoid access to the nonexistant
+ * ports.
+ */
+ vsc->ds = dsa_switch_alloc(dev, 8);
+ if (!vsc->ds)
+ return -ENOMEM;
+ vsc->ds->priv = vsc;
+
+ vsc->ds->ops = &vsc73xx_ds_ops;
+ ret = dsa_register_switch(vsc->ds);
+ if (ret) {
+ dev_err(dev, "unable to register switch (%d)\n", ret);
+ return ret;
+ }
+
+ ret = vsc73xx_gpio_probe(vsc);
+ if (ret) {
+ dsa_unregister_switch(vsc->ds);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int vsc73xx_remove(struct spi_device *spi)
+{
+ struct vsc73xx *vsc = spi_get_drvdata(spi);
+
+ dsa_unregister_switch(vsc->ds);
+ gpiod_set_value(vsc->reset, 1);
+
+ return 0;
+}
+
+static const struct of_device_id vsc73xx_of_match[] = {
+ {
+ .compatible = "vitesse,vsc7385",
+ },
+ {
+ .compatible = "vitesse,vsc7388",
+ },
+ {
+ .compatible = "vitesse,vsc7395",
+ },
+ {
+ .compatible = "vitesse,vsc7398",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, vsc73xx_of_match);
+
+static struct spi_driver vsc73xx_driver = {
+ .probe = vsc73xx_probe,
+ .remove = vsc73xx_remove,
+ .driver = {
+ .name = "vsc73xx",
+ .of_match_table = vsc73xx_of_match,
+ },
+};
+module_spi_driver(vsc73xx_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 02:46:30 +0000