1 files changed, 5 insertions, 91 deletions

diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 75897a369096..bdb8d8d34880 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -292,89 +292,6 @@ int rtl8366_reset_vlan(struct realtek_smi *smi)
 }
 EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
 
-int rtl8366_init_vlan(struct realtek_smi *smi)
-{
-	int port;
-	int ret;
-
-	ret = rtl8366_reset_vlan(smi);
-	if (ret)
-		return ret;
-
-	/* Loop over the available ports, for each port, associate
-	 * it with the VLAN (port+1)
-	 */
-	for (port = 0; port < smi->num_ports; port++) {
-		u32 mask;
-
-		if (port == smi->cpu_port)
-			/* For the CPU port, make all ports members of this
-			 * VLAN.
-			 */
-			mask = GENMASK((int)smi->num_ports - 1, 0);
-		else
-			/* For all other ports, enable itself plus the
-			 * CPU port.
-			 */
-			mask = BIT(port) | BIT(smi->cpu_port);
-
-		/* For each port, set the port as member of VLAN (port+1)
-		 * and untagged, except for the CPU port: the CPU port (5) is
-		 * member of VLAN 6 and so are ALL the other ports as well.
-		 * Use filter 0 (no filter).
-		 */
-		dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n",
-			 (port + 1), port, mask);
-		ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0);
-		if (ret)
-			return ret;
-
-		dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n",
-			 (port + 1), port, (port + 1));
-		ret = rtl8366_set_pvid(smi, port, (port + 1));
-		if (ret)
-			return ret;
-	}
-
-	return rtl8366_enable_vlan(smi, true);
-}
-EXPORT_SYMBOL_GPL(rtl8366_init_vlan);
-
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
-			   struct netlink_ext_ack *extack)
-{
-	struct realtek_smi *smi = ds->priv;
-	struct rtl8366_vlan_4k vlan4k;
-	int ret;
-
-	/* Use VLAN nr port + 1 since VLAN0 is not valid */
-	if (!smi->ops->is_vlan_valid(smi, port + 1))
-		return -EINVAL;
-
-	dev_info(smi->dev, "%s filtering on port %d\n",
-		 vlan_filtering ? "enable" : "disable",
-		 port);
-
-	/* TODO:
-	 * The hardware support filter ID (FID) 0..7, I have no clue how to
-	 * support this in the driver when the callback only says on/off.
-	 */
-	ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
-	if (ret)
-		return ret;
-
-	/* Just set the filter to FID 1 for now then */
-	ret = rtl8366_set_vlan(smi, port + 1,
-			       vlan4k.member,
-			       vlan4k.untag,
-			       1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
-
 int rtl8366_vlan_add(struct dsa_switch *ds, int port,
 		     const struct switchdev_obj_port_vlan *vlan,
 		     struct netlink_ext_ack *extack)
@@ -401,12 +318,9 @@ int rtl8366_vlan_add(struct dsa_switch *ds, int port,
 		return ret;
 	}
 
-	dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n",
-		 vlan->vid, port, untagged ? "untagged" : "tagged",
-		 pvid ? " PVID" : "no PVID");
-
-	if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
-		dev_err(smi->dev, "port is DSA or CPU port\n");
+	dev_dbg(smi->dev, "add VLAN %d on port %d, %s, %s\n",
+		vlan->vid, port, untagged ? "untagged" : "tagged",
+		pvid ? "PVID" : "no PVID");
 
 	member |= BIT(port);
 
@@ -439,7 +353,7 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
 	struct realtek_smi *smi = ds->priv;
 	int ret, i;
 
-	dev_info(smi->dev, "del VLAN %04x on port %d\n", vlan->vid, port);
+	dev_dbg(smi->dev, "del VLAN %d on port %d\n", vlan->vid, port);
 
 	for (i = 0; i < smi->num_vlan_mc; i++) {
 		struct rtl8366_vlan_mc vlanmc;
@@ -457,7 +371,7 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
 			 * anymore then clear the whole member
 			 * config so it can be reused.
 			 */
-			if (!vlanmc.member && vlanmc.untag) {
+			if (!vlanmc.member) {
 				vlanmc.vid = 0;
 				vlanmc.priority = 0;
 				vlanmc.fid = 0;