diff options
Diffstat (limited to 'drivers/net/dsa/mv88e6131.c')
| -rw-r--r-- | drivers/net/dsa/mv88e6131.c | 177 |
1 files changed, 0 insertions, 177 deletions
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c deleted file mode 100644 index a92ca651c399..000000000000 --- a/drivers/net/dsa/mv88e6131.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support - * Copyright (c) 2008-2009 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/delay.h> -#include <linux/jiffies.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <net/dsa.h> -#include "mv88e6xxx.h" - -static const struct mv88e6xxx_switch_id mv88e6131_table[] = { - { PORT_SWITCH_ID_6085, "Marvell 88E6085" }, - { PORT_SWITCH_ID_6095, "Marvell 88E6095/88E6095F" }, - { PORT_SWITCH_ID_6131, "Marvell 88E6131" }, - { PORT_SWITCH_ID_6131_B2, "Marvell 88E6131 (B2)" }, - { PORT_SWITCH_ID_6185, "Marvell 88E6185" }, -}; - -static char *mv88e6131_probe(struct device *host_dev, int sw_addr) -{ - return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6131_table, - ARRAY_SIZE(mv88e6131_table)); -} - -static int mv88e6131_setup_global(struct dsa_switch *ds) -{ - u32 upstream_port = dsa_upstream_port(ds); - int ret; - u32 reg; - - ret = mv88e6xxx_setup_global(ds); - if (ret) - return ret; - - /* Enable the PHY polling unit, don't discard packets with - * excessive collisions, use a weighted fair queueing scheme - * to arbitrate between packet queues, set the maximum frame - * size to 1632, and mask all interrupt sources. - */ - REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, - GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_MAX_FRAME_1632); - - /* Set the VLAN ethertype to 0x8100. */ - REG_WRITE(REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100); - - /* Disable ARP mirroring, and configure the upstream port as - * the port to which ingress and egress monitor frames are to - * be sent. - */ - reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | - upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | - GLOBAL_MONITOR_CONTROL_ARP_DISABLED; - REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg); - - /* Disable cascade port functionality unless this device - * is used in a cascade configuration, and set the switch's - * DSA device number. - */ - if (ds->dst->pd->nr_chips > 1) - REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, - GLOBAL_CONTROL_2_MULTIPLE_CASCADE | - (ds->index & 0x1f)); - else - REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, - GLOBAL_CONTROL_2_NO_CASCADE | - (ds->index & 0x1f)); - - /* Force the priority of IGMP/MLD snoop frames and ARP frames - * to the highest setting. - */ - REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE, - GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP | - 7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT | - GLOBAL2_PRIO_OVERRIDE_FORCE_ARP | - 7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT); - - return 0; -} - -static int mv88e6131_setup(struct dsa_switch *ds) -{ - struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); - int ret; - - ret = mv88e6xxx_setup_common(ds); - if (ret < 0) - return ret; - - mv88e6xxx_ppu_state_init(ds); - - switch (ps->id) { - case PORT_SWITCH_ID_6085: - case PORT_SWITCH_ID_6185: - ps->num_ports = 10; - break; - case PORT_SWITCH_ID_6095: - ps->num_ports = 11; - break; - case PORT_SWITCH_ID_6131: - case PORT_SWITCH_ID_6131_B2: - ps->num_ports = 8; - break; - default: - return -ENODEV; - } - - ret = mv88e6xxx_switch_reset(ds, false); - if (ret < 0) - return ret; - - ret = mv88e6131_setup_global(ds); - if (ret < 0) - return ret; - - return mv88e6xxx_setup_ports(ds); -} - -static int mv88e6131_port_to_phy_addr(struct dsa_switch *ds, int port) -{ - struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); - - if (port >= 0 && port < ps->num_ports) - return port; - - return -EINVAL; -} - -static int -mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum) -{ - int addr = mv88e6131_port_to_phy_addr(ds, port); - - if (addr < 0) - return addr; - - return mv88e6xxx_phy_read_ppu(ds, addr, regnum); -} - -static int -mv88e6131_phy_write(struct dsa_switch *ds, - int port, int regnum, u16 val) -{ - int addr = mv88e6131_port_to_phy_addr(ds, port); - - if (addr < 0) - return addr; - - return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val); -} - -struct dsa_switch_driver mv88e6131_switch_driver = { - .tag_protocol = DSA_TAG_PROTO_DSA, - .priv_size = sizeof(struct mv88e6xxx_priv_state), - .probe = mv88e6131_probe, - .setup = mv88e6131_setup, - .set_addr = mv88e6xxx_set_addr_direct, - .phy_read = mv88e6131_phy_read, - .phy_write = mv88e6131_phy_write, - .get_strings = mv88e6xxx_get_strings, - .get_ethtool_stats = mv88e6xxx_get_ethtool_stats, - .get_sset_count = mv88e6xxx_get_sset_count, - .adjust_link = mv88e6xxx_adjust_link, -}; - -MODULE_ALIAS("platform:mv88e6085"); -MODULE_ALIAS("platform:mv88e6095"); -MODULE_ALIAS("platform:mv88e6095f"); -MODULE_ALIAS("platform:mv88e6131"); |