5 files changed, 11 insertions, 39 deletions

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 424970939fd4..1c28eade6bec 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -123,6 +123,7 @@ config CAN_JANZ_ICAN3
 config CAN_KVASER_PCIEFD
 	depends on PCI
 	tristate "Kvaser PCIe FD cards"
+	select CRC32
 	  help
 	  This is a driver for the Kvaser PCI Express CAN FD family.
 
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 2c9f12401276..da551fd0f502 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1852,8 +1852,6 @@ EXPORT_SYMBOL_GPL(m_can_class_register);
 void m_can_class_unregister(struct m_can_classdev *cdev)
 {
 	unregister_candev(cdev->net);
-
-	m_can_clk_stop(cdev);
 }
 EXPORT_SYMBOL_GPL(m_can_class_unregister);
 
diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
index 24c737c4fc44..970f0e9d19bf 100644
--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -131,30 +131,6 @@ static inline struct tcan4x5x_priv *cdev_to_priv(struct m_can_classdev *cdev)
 
 }
 
-static struct can_bittiming_const tcan4x5x_bittiming_const = {
-	.name = DEVICE_NAME,
-	.tseg1_min = 2,
-	.tseg1_max = 31,
-	.tseg2_min = 2,
-	.tseg2_max = 16,
-	.sjw_max = 16,
-	.brp_min = 1,
-	.brp_max = 32,
-	.brp_inc = 1,
-};
-
-static struct can_bittiming_const tcan4x5x_data_bittiming_const = {
-	.name = DEVICE_NAME,
-	.tseg1_min = 1,
-	.tseg1_max = 32,
-	.tseg2_min = 1,
-	.tseg2_max = 16,
-	.sjw_max = 16,
-	.brp_min = 1,
-	.brp_max = 32,
-	.brp_inc = 1,
-};
-
 static void tcan4x5x_check_wake(struct tcan4x5x_priv *priv)
 {
 	int wake_state = 0;
@@ -469,8 +445,6 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 	mcan_class->dev = &spi->dev;
 	mcan_class->ops = &tcan4x5x_ops;
 	mcan_class->is_peripheral = true;
-	mcan_class->bit_timing = &tcan4x5x_bittiming_const;
-	mcan_class->data_timing = &tcan4x5x_data_bittiming_const;
 	mcan_class->net->irq = spi->irq;
 
 	spi_set_drvdata(spi, priv);
diff --git a/drivers/net/can/rcar/Kconfig b/drivers/net/can/rcar/Kconfig
index 8d36101b78e3..29cabc20109e 100644
--- a/drivers/net/can/rcar/Kconfig
+++ b/drivers/net/can/rcar/Kconfig
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 config CAN_RCAR
-	tristate "Renesas R-Car CAN controller"
+	tristate "Renesas R-Car and RZ/G CAN controller"
 	depends on ARCH_RENESAS || ARM
 	help
 	  Say Y here if you want to use CAN controller found on Renesas R-Car
-	  SoCs.
+	  or RZ/G SoCs.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called rcar_can.
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 77129d5f410b..36235afb0bc6 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1368,13 +1368,10 @@ static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
 		struct mcp251xfd_tx_ring *tx_ring = priv->tx;
 		struct spi_transfer *last_xfer;
 
-		tx_ring->tail += len;
-
 		/* Increment the TEF FIFO tail pointer 'len' times in
 		 * a single SPI message.
-		 */
-
-		/* Note:
+		 *
+		 * Note:
 		 *
 		 * "cs_change == 1" on the last transfer results in an
 		 * active chip select after the complete SPI
@@ -1391,6 +1388,8 @@ static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
 		if (err)
 			return err;
 
+		tx_ring->tail += len;
+
 		err = mcp251xfd_check_tef_tail(priv);
 		if (err)
 			return err;
@@ -1553,10 +1552,8 @@ mcp251xfd_handle_rxif_ring(struct mcp251xfd_priv *priv,
 
 		/* Increment the RX FIFO tail pointer 'len' times in a
 		 * single SPI message.
-		 */
-		ring->tail += len;
-
-		/* Note:
+		 *
+		 * Note:
 		 *
 		 * "cs_change == 1" on the last transfer results in an
 		 * active chip select after the complete SPI
@@ -1572,6 +1569,8 @@ mcp251xfd_handle_rxif_ring(struct mcp251xfd_priv *priv,
 		last_xfer->cs_change = 1;
 		if (err)
 			return err;
+
+		ring->tail += len;
 	}
 
 	return 0;