summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x')
-rw-r--r--drivers/net/bnx2x/bnx2x.h2
-rw-r--r--drivers/net/bnx2x/bnx2x_hsi.h2
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c14
-rw-r--r--drivers/net/bnx2x/bnx2x_main.c10
-rw-r--r--drivers/net/bnx2x/bnx2x_reg.h44
5 files changed, 36 insertions, 36 deletions
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index b7ff87b35fbb..e0fca701d2f3 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1220,7 +1220,7 @@ struct bnx2x {
struct bnx2x_dcbx_port_params dcbx_port_params;
int dcb_version;
- /* DCBX Negotation results */
+ /* DCBX Negotiation results */
struct dcbx_features dcbx_local_feat;
u32 dcbx_error;
u32 pending_max;
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index be503cc0a50b..dac1bf9cbbfa 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -3019,7 +3019,7 @@ struct tstorm_eth_mac_filter_config {
/*
- * common flag to indicate existance of TPA.
+ * common flag to indicate existence of TPA.
*/
struct tstorm_eth_tpa_exist {
#if defined(__BIG_ENDIAN)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index f2f367d4e74d..974ef2be36a5 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -2823,7 +2823,7 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp,
struct link_params *params)
{
u16 cnt, ctrl;
- /* Wait for soft reset to get cleared upto 1 sec */
+ /* Wait for soft reset to get cleared up to 1 sec */
for (cnt = 0; cnt < 1000; cnt++) {
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl);
@@ -4141,7 +4141,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
val = (1<<5);
/*
* Note that 2.5G works only when used with 1G
- * advertisment
+ * advertisement
*/
} else
val = (1<<5);
@@ -4151,7 +4151,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
val |= (1<<7);
- /* Note that 2.5G works only when used with 1G advertisment */
+ /* Note that 2.5G works only when used with 1G advertisement */
if (phy->speed_cap_mask &
(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
@@ -5232,14 +5232,14 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1);
} else {
- /* Force 1Gbps using autoneg with 1G advertisment */
+ /* Force 1Gbps using autoneg with 1G advertisement */
/* Allow CL37 through CL73 */
DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
- /* Enable Full-Duplex advertisment on CL37 */
+ /* Enable Full-Duplex advertisement on CL37 */
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020);
/* Enable CL37 AN */
@@ -6269,7 +6269,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
switch (actual_phy_selection) {
case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
- /* Do nothing. Essentialy this is like the priority copper */
+ /* Do nothing. Essentially this is like the priority copper */
break;
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER;
@@ -7765,7 +7765,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
msleep(10);
- /* The PHY reset is controled by GPIO 1
+ /* The PHY reset is controlled by GPIO 1
* Hold it as vars low
*/
/* clear link led */
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 32e64cc85d2c..a97a4a1c344f 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -3702,7 +3702,7 @@ static void bnx2x_eq_int(struct bnx2x *bp)
if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE)
hw_cons++;
- /* This function may never run in parralel with itself for a
+ /* This function may never run in parallel with itself for a
* specific bp, thus there is no need in "paired" read memory
* barrier here.
*/
@@ -5089,7 +5089,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
/* Step 1: set zeroes to all ilt page entries with valid bit on
* Step 2: set the timers first/last ilt entry to point
* to the entire range to prevent ILT range error for 3rd/4th
- * vnic (this code assumes existance of the vnic)
+ * vnic (this code assumes existence of the vnic)
*
* both steps performed by call to bnx2x_ilt_client_init_op()
* with dummy TM client
@@ -8685,7 +8685,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
E1H_FUNC_MAX * sizeof(struct drv_func_mb);
/*
* get mf configuration:
- * 1. existance of MF configuration
+ * 1. existence of MF configuration
* 2. MAC address must be legal (check only upper bytes)
* for Switch-Independent mode;
* OVLAN must be legal for Switch-Dependent mode
@@ -8727,7 +8727,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
default:
/* Unknown configuration: reset mf_config */
bp->mf_config[vn] = 0;
- DP(NETIF_MSG_PROBE, "Unkown MF mode 0x%x\n",
+ DP(NETIF_MSG_PROBE, "Unknown MF mode 0x%x\n",
val);
}
}
@@ -9777,7 +9777,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
#endif
- /* Configure interupt mode: try to enable MSI-X/MSI if
+ /* Configure interrupt mode: try to enable MSI-X/MSI if
* needed, set bp->num_queues appropriately.
*/
bnx2x_set_int_mode(bp);
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 1c89f19a4425..1509a2318af9 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -175,9 +175,9 @@
the initial credit value; read returns the current value of the credit
counter. Must be initialized to 1 at start-up. */
#define CCM_REG_CFC_INIT_CRD 0xd0204
-/* [RW 2] Auxillary counter flag Q number 1. */
+/* [RW 2] Auxiliary counter flag Q number 1. */
#define CCM_REG_CNT_AUX1_Q 0xd00c8
-/* [RW 2] Auxillary counter flag Q number 2. */
+/* [RW 2] Auxiliary counter flag Q number 2. */
#define CCM_REG_CNT_AUX2_Q 0xd00cc
/* [RW 28] The CM header value for QM request (primary). */
#define CCM_REG_CQM_CCM_HDR_P 0xd008c
@@ -457,13 +457,13 @@
#define CSDM_REG_AGG_INT_MODE_9 0xc21dc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
#define CSDM_REG_CMP_COUNTER_MAX0 0xc201c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
#define CSDM_REG_CMP_COUNTER_MAX1 0xc2020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
#define CSDM_REG_CMP_COUNTER_MAX2 0xc2024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
#define CSDM_REG_CMP_COUNTER_MAX3 0xc2028
/* [RW 13] The start address in the internal RAM for the completion
counters. */
@@ -851,7 +851,7 @@
#define IGU_REG_ATTN_MSG_ADDR_L 0x130120
/* [R 4] Debug: [3] - attention write done message is pending (0-no pending;
* 1-pending). [2:0] = PFID. Pending means attention message was sent; but
- * write done didnt receive. */
+ * write done didn't receive. */
#define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030
#define IGU_REG_BLOCK_CONFIGURATION 0x130000
#define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124
@@ -862,7 +862,7 @@
#define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200
/* [R 5] Debug: ctrl_fsm */
#define IGU_REG_CTRL_FSM 0x130064
-/* [R 1] data availble for error memory. If this bit is clear do not red
+/* [R 1] data available for error memory. If this bit is clear do not red
* from error_handling_memory. */
#define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130
/* [RW 11] Parity mask register #0 read/write */
@@ -3015,7 +3015,7 @@
block. Should be used for close the gates. */
#define PXP_REG_HST_DISCARD_DOORBELLS 0x1030a4
/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
- should update accoring to 'hst_discard_doorbells' register when the state
+ should update according to 'hst_discard_doorbells' register when the state
machine is idle */
#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
/* [RW 1] When 1; new internal writes arriving to the block are discarded.
@@ -3023,7 +3023,7 @@
#define PXP_REG_HST_DISCARD_INTERNAL_WRITES 0x1030a8
/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
means this PSWHST is discarding inputs from this client. Each bit should
- update accoring to 'hst_discard_internal_writes' register when the state
+ update according to 'hst_discard_internal_writes' register when the state
machine is idle. */
#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
/* [WB 160] Used for initialization of the inbound interrupts memory */
@@ -3822,13 +3822,13 @@
#define TSDM_REG_AGG_INT_T_1 0x420bc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define TSDM_REG_CFC_RSP_START_ADDR 0x42008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
#define TSDM_REG_CMP_COUNTER_MAX0 0x4201c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
#define TSDM_REG_CMP_COUNTER_MAX1 0x42020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
#define TSDM_REG_CMP_COUNTER_MAX2 0x42024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
#define TSDM_REG_CMP_COUNTER_MAX3 0x42028
/* [RW 13] The start address in the internal RAM for the completion
counters. */
@@ -4284,13 +4284,13 @@
#define USDM_REG_AGG_INT_T_6 0xc40d0
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define USDM_REG_CFC_RSP_START_ADDR 0xc4008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
#define USDM_REG_CMP_COUNTER_MAX0 0xc401c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
#define USDM_REG_CMP_COUNTER_MAX1 0xc4020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
#define USDM_REG_CMP_COUNTER_MAX2 0xc4024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
#define USDM_REG_CMP_COUNTER_MAX3 0xc4028
/* [RW 13] The start address in the internal RAM for the completion
counters. */
@@ -4798,13 +4798,13 @@
#define XSDM_REG_AGG_INT_MODE_1 0x1661bc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define XSDM_REG_CFC_RSP_START_ADDR 0x166008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
#define XSDM_REG_CMP_COUNTER_MAX0 0x16601c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
#define XSDM_REG_CMP_COUNTER_MAX1 0x166020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
#define XSDM_REG_CMP_COUNTER_MAX2 0x166024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
#define XSDM_REG_CMP_COUNTER_MAX3 0x166028
/* [RW 13] The start address in the internal RAM for the completion
counters. */