diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_hsi.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_hsi.h | 114 |
1 files changed, 103 insertions, 11 deletions
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h index 548f5631c0dc..be503cc0a50b 100644 --- a/drivers/net/bnx2x/bnx2x_hsi.h +++ b/drivers/net/bnx2x/bnx2x_hsi.h @@ -11,20 +11,27 @@ #include "bnx2x_fw_defs.h" +#define FW_ENCODE_32BIT_PATTERN 0x1e1e1e1e + struct license_key { u32 reserved[6]; -#if defined(__BIG_ENDIAN) - u16 max_iscsi_init_conn; - u16 max_iscsi_trgt_conn; -#elif defined(__LITTLE_ENDIAN) - u16 max_iscsi_trgt_conn; - u16 max_iscsi_init_conn; -#endif + u32 max_iscsi_conn; +#define BNX2X_MAX_ISCSI_TRGT_CONN_MASK 0xFFFF +#define BNX2X_MAX_ISCSI_TRGT_CONN_SHIFT 0 +#define BNX2X_MAX_ISCSI_INIT_CONN_MASK 0xFFFF0000 +#define BNX2X_MAX_ISCSI_INIT_CONN_SHIFT 16 - u32 reserved_a[6]; -}; + u32 reserved_a; + + u32 max_fcoe_conn; +#define BNX2X_MAX_FCOE_TRGT_CONN_MASK 0xFFFF +#define BNX2X_MAX_FCOE_TRGT_CONN_SHIFT 0 +#define BNX2X_MAX_FCOE_INIT_CONN_MASK 0xFFFF0000 +#define BNX2X_MAX_FCOE_INIT_CONN_SHIFT 16 + u32 reserved_b[4]; +}; #define PORT_0 0 #define PORT_1 1 @@ -237,8 +244,26 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT 16 - u32 Reserved0[16]; /* 0x158 */ - + u32 Reserved0[3]; /* 0x158 */ + /* Controls the TX laser of the SFP+ module */ + u32 sfp_ctrl; /* 0x164 */ +#define PORT_HW_CFG_TX_LASER_MASK 0x000000FF +#define PORT_HW_CFG_TX_LASER_SHIFT 0 +#define PORT_HW_CFG_TX_LASER_MDIO 0x00000000 +#define PORT_HW_CFG_TX_LASER_GPIO0 0x00000001 +#define PORT_HW_CFG_TX_LASER_GPIO1 0x00000002 +#define PORT_HW_CFG_TX_LASER_GPIO2 0x00000003 +#define PORT_HW_CFG_TX_LASER_GPIO3 0x00000004 + + /* Controls the fault module LED of the SFP+ */ +#define PORT_HW_CFG_FAULT_MODULE_LED_MASK 0x0000FF00 +#define PORT_HW_CFG_FAULT_MODULE_LED_SHIFT 8 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO0 0x00000000 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO1 0x00000100 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO2 0x00000200 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO3 0x00000300 +#define PORT_HW_CFG_FAULT_MODULE_LED_DISABLED 0x00000400 + u32 Reserved01[12]; /* 0x158 */ /* for external PHY, or forced mode or during AN */ u16 xgxs_config_rx[4]; /* 0x198 */ @@ -246,12 +271,78 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ u32 Reserved1[56]; /* 0x1A8 */ u32 default_cfg; /* 0x288 */ +#define PORT_HW_CFG_GPIO0_CONFIG_MASK 0x00000003 +#define PORT_HW_CFG_GPIO0_CONFIG_SHIFT 0 +#define PORT_HW_CFG_GPIO0_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO0_CONFIG_LOW 0x00000001 +#define PORT_HW_CFG_GPIO0_CONFIG_HIGH 0x00000002 +#define PORT_HW_CFG_GPIO0_CONFIG_INPUT 0x00000003 + +#define PORT_HW_CFG_GPIO1_CONFIG_MASK 0x0000000C +#define PORT_HW_CFG_GPIO1_CONFIG_SHIFT 2 +#define PORT_HW_CFG_GPIO1_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO1_CONFIG_LOW 0x00000004 +#define PORT_HW_CFG_GPIO1_CONFIG_HIGH 0x00000008 +#define PORT_HW_CFG_GPIO1_CONFIG_INPUT 0x0000000c + +#define PORT_HW_CFG_GPIO2_CONFIG_MASK 0x00000030 +#define PORT_HW_CFG_GPIO2_CONFIG_SHIFT 4 +#define PORT_HW_CFG_GPIO2_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO2_CONFIG_LOW 0x00000010 +#define PORT_HW_CFG_GPIO2_CONFIG_HIGH 0x00000020 +#define PORT_HW_CFG_GPIO2_CONFIG_INPUT 0x00000030 + +#define PORT_HW_CFG_GPIO3_CONFIG_MASK 0x000000C0 +#define PORT_HW_CFG_GPIO3_CONFIG_SHIFT 6 +#define PORT_HW_CFG_GPIO3_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO3_CONFIG_LOW 0x00000040 +#define PORT_HW_CFG_GPIO3_CONFIG_HIGH 0x00000080 +#define PORT_HW_CFG_GPIO3_CONFIG_INPUT 0x000000c0 + + /* + * When KR link is required to be set to force which is not + * KR-compliant, this parameter determine what is the trigger for it. + * When GPIO is selected, low input will force the speed. Currently + * default speed is 1G. In the future, it may be widen to select the + * forced speed in with another parameter. Note when force-1G is + * enabled, it override option 56: Link Speed option. + */ +#define PORT_HW_CFG_FORCE_KR_ENABLER_MASK 0x00000F00 +#define PORT_HW_CFG_FORCE_KR_ENABLER_SHIFT 8 +#define PORT_HW_CFG_FORCE_KR_ENABLER_NOT_FORCED 0x00000000 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO0_P0 0x00000100 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO1_P0 0x00000200 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO2_P0 0x00000300 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO3_P0 0x00000400 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO0_P1 0x00000500 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO1_P1 0x00000600 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO2_P1 0x00000700 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO3_P1 0x00000800 +#define PORT_HW_CFG_FORCE_KR_ENABLER_FORCED 0x00000900 + /* Enable to determine with which GPIO to reset the external phy */ +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK 0x000F0000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT 16 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_PHY_TYPE 0x00000000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0 0x00010000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0 0x00020000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0 0x00030000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0 0x00040000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1 0x00050000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1 0x00060000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1 0x00070000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1 0x00080000 /* Enable BAM on KR */ #define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK 0x00100000 #define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT 20 #define PORT_HW_CFG_ENABLE_BAM_ON_KR_DISABLED 0x00000000 #define PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED 0x00100000 + /* Enable Common Mode Sense */ +#define PORT_HW_CFG_ENABLE_CMS_MASK 0x00200000 +#define PORT_HW_CFG_ENABLE_CMS_SHIFT 21 +#define PORT_HW_CFG_ENABLE_CMS_DISABLED 0x00000000 +#define PORT_HW_CFG_ENABLE_CMS_ENABLED 0x00200000 + u32 speed_capability_mask2; /* 0x28C */ #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK 0x0000FFFF #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT 0 @@ -381,6 +472,7 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 0x00000900 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC 0x00000a00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823 0x00000b00 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833 0x00000d00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 |