summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/Kconfig')
-rw-r--r--drivers/mtd/nand/Kconfig69
1 files changed, 53 insertions, 16 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 42e5ea49e975..98a04b3c9526 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -2,11 +2,23 @@ menuconfig MTD_NAND
tristate "NAND Device Support"
depends on MTD
select MTD_NAND_IDS
+ select MTD_NAND_ECC
help
This enables support for accessing all type of NAND flash
devices. For further information see
<http://www.linux-mtd.infradead.org/doc/nand.html>.
+config MTD_NAND_ECC
+ tristate
+
+config MTD_NAND_ECC_SMC
+ bool "NAND ECC Smart Media byte order"
+ depends on MTD_NAND_ECC
+ default n
+ help
+ Software ECC according to the Smart Media Specification.
+ The original Linux implementation had byte 0 and 1 swapped.
+
if MTD_NAND
config MTD_NAND_VERIFY_WRITE
@@ -18,12 +30,9 @@ config MTD_NAND_VERIFY_WRITE
device thinks the write was successful, a bit could have been
flipped accidentally due to device wear or something else.
-config MTD_NAND_ECC_SMC
- bool "NAND ECC Smart Media byte order"
+config MTD_SM_COMMON
+ tristate
default n
- help
- Software ECC according to the Smart Media Specification.
- The original Linux implementation had byte 0 and 1 swapped.
config MTD_NAND_MUSEUM_IDS
bool "Enable chip ids for obsolete ancient NAND devices"
@@ -41,6 +50,23 @@ config MTD_NAND_AUTCPU12
This enables the driver for the autronix autcpu12 board to
access the SmartMediaCard.
+config MTD_NAND_DENALI
+ depends on PCI
+ tristate "Support Denali NAND controller on Intel Moorestown"
+ help
+ Enable the driver for NAND flash on Intel Moorestown, using the
+ Denali NAND controller core.
+
+config MTD_NAND_DENALI_SCRATCH_REG_ADDR
+ hex "Denali NAND size scratch register address"
+ default "0xFF108018"
+ help
+ Some platforms place the NAND chip size in a scratch register
+ because (some versions of) the driver aren't able to automatically
+ determine the size of certain chips. Set the address of the
+ scratch register here to enable this feature. On Intel Moorestown
+ boards, the scratch register is at 0xFF108018.
+
config MTD_NAND_EDB7312
tristate "Support for Cirrus Logic EBD7312 evaluation board"
depends on ARCH_EDB7312
@@ -95,15 +121,21 @@ config MTD_NAND_OMAP_PREFETCH_DMA
or in DMA interrupt mode.
Say y for DMA mode or MPU mode will be used
-config MTD_NAND_TS7250
- tristate "NAND Flash device on TS-7250 board"
- depends on MACH_TS72XX
- help
- Support for NAND flash on Technologic Systems TS-7250 platform.
-
config MTD_NAND_IDS
tristate
+config MTD_NAND_RICOH
+ tristate "Ricoh xD card reader"
+ default n
+ depends on PCI
+ select MTD_SM_COMMON
+ help
+ Enable support for Ricoh R5C852 xD card reader
+ You also need to enable ether
+ NAND SSFDC (SmartMedia) read only translation layer' or new
+ expermental, readwrite
+ 'SmartMedia/xD new translation layer'
+
config MTD_NAND_AU1550
tristate "Au1550/1200 NAND support"
depends on SOC_AU1200 || SOC_AU1550
@@ -358,8 +390,6 @@ config MTD_NAND_ATMEL_ECC_NONE
If unsure, say N
- endchoice
-
endchoice
config MTD_NAND_PXA3xx
@@ -442,6 +472,13 @@ config MTD_NAND_FSL_UPM
Enables support for NAND Flash chips wired onto Freescale PowerPC
processor localbus with User-Programmable Machine support.
+config MTD_NAND_MPC5121_NFC
+ tristate "MPC5121 built-in NAND Flash Controller support"
+ depends on PPC_MPC512x
+ help
+ This enables the driver for the NAND flash controller on the
+ MPC5121 SoC.
+
config MTD_NAND_MXC
tristate "MXC NAND support"
depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
@@ -481,11 +518,11 @@ config MTD_NAND_SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
-config MTD_NAND_W90P910
- tristate "Support for NAND on w90p910 evaluation board."
+config MTD_NAND_NUC900
+ tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
depends on ARCH_W90X900 && MTD_PARTITIONS
help
This enables the driver for the NAND Flash on evaluation board based
- on w90p910.
+ on w90p910 / NUC9xx.
endif # MTD_NAND