diff options
Diffstat (limited to 'drivers/mtd/devices')
-rw-r--r-- | drivers/mtd/devices/Kconfig | 1 | ||||
-rw-r--r-- | drivers/mtd/devices/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/devices/block2mtd.c | 6 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2000.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2001.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2001plus.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/docecc.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/docprobe.c | 5 | ||||
-rw-r--r-- | drivers/mtd/devices/lart.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/m25p80.c | 22 | ||||
-rw-r--r-- | drivers/mtd/devices/ms02-nv.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/ms02-nv.h | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 135 | ||||
-rw-r--r-- | drivers/mtd/devices/mtdram.c | 1 | ||||
-rw-r--r-- | drivers/mtd/devices/phram.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/pmc551.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/slram.c | 2 |
17 files changed, 143 insertions, 48 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 35ed1103dbb2..9c613f06623c 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -1,5 +1,4 @@ # drivers/mtd/maps/Kconfig -# $Id: Kconfig,v 1.18 2005/11/07 11:14:24 gleixner Exp $ menu "Self-contained MTD device drivers" depends on MTD!=n diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 0f788d5c4bf8..0993d5cf3923 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -1,7 +1,6 @@ # # linux/drivers/devices/Makefile # -# $Id: Makefile.common,v 1.7 2004/12/22 17:51:15 joern Exp $ obj-$(CONFIG_MTD_DOC2000) += doc2000.o obj-$(CONFIG_MTD_DOC2001) += doc2001.o diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index 7b72a1b36115..91fbba767635 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -1,6 +1,4 @@ /* - * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $ - * * block2mtd.c - create an mtd from a block device * * Copyright (C) 2001,2002 Simon Evans <spse@secret.org.uk> @@ -20,9 +18,6 @@ #include <linux/mutex.h> #include <linux/mount.h> -#define VERSION "$Revision: 1.30 $" - - #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args) @@ -453,7 +448,6 @@ MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\""); static int __init block2mtd_init(void) { int ret = 0; - INFO("version " VERSION); #ifndef MODULE if (strlen(block2mtd_paramline)) diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c index 846989f292e3..50de839c77a9 100644 --- a/drivers/mtd/devices/doc2000.c +++ b/drivers/mtd/devices/doc2000.c @@ -3,8 +3,6 @@ * Linux driver for Disk-On-Chip 2000 and Millennium * (c) 1999 Machine Vision Holdings, Inc. * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> - * - * $Id: doc2000.c,v 1.67 2005/11/07 11:14:24 gleixner Exp $ */ #include <linux/kernel.h> diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c index 6413efc045e0..e32c568c1145 100644 --- a/drivers/mtd/devices/doc2001.c +++ b/drivers/mtd/devices/doc2001.c @@ -3,8 +3,6 @@ * Linux driver for Disk-On-Chip Millennium * (c) 1999 Machine Vision Holdings, Inc. * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> - * - * $Id: doc2001.c,v 1.49 2005/11/07 11:14:24 gleixner Exp $ */ #include <linux/kernel.h> diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 83be3461658f..d853f891b586 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -6,8 +6,6 @@ * (c) 1999 Machine Vision Holdings, Inc. * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> * - * $Id: doc2001plus.c,v 1.14 2005/11/07 11:14:24 gleixner Exp $ - * * Released under GPL */ diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c index fd8a8daba3a8..874e51b110a2 100644 --- a/drivers/mtd/devices/docecc.c +++ b/drivers/mtd/devices/docecc.c @@ -7,8 +7,6 @@ * Author: Fabrice Bellard (fabrice.bellard@netgem.com) * Copyright (C) 2000 Netgem S.A. * - * $Id: docecc.c,v 1.7 2005/11/07 11:14:25 gleixner Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c index d8cc94ec4e50..6e62922942b1 100644 --- a/drivers/mtd/devices/docprobe.c +++ b/drivers/mtd/devices/docprobe.c @@ -4,9 +4,6 @@ /* (C) 1999 Machine Vision Holdings, Inc. */ /* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> */ -/* $Id: docprobe.c,v 1.46 2005/11/07 11:14:25 gleixner Exp $ */ - - /* DOC_PASSIVE_PROBE: In order to ensure that the BIOS checksum is correct at boot time, and @@ -79,8 +76,6 @@ static unsigned long __initdata doc_locations[] = { 0xe0000, 0xe2000, 0xe4000, 0xe6000, 0xe8000, 0xea000, 0xec000, 0xee000, #endif /* CONFIG_MTD_DOCPROBE_HIGH */ -#elif defined(__PPC__) - 0xe4000000, #else #warning Unknown architecture for DiskOnChip. No default probe locations defined #endif diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 1d324e5c412d..f4bda4cee495 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -2,8 +2,6 @@ /* * MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART. * - * $Id: lart.c,v 1.9 2005/11/07 11:14:25 gleixner Exp $ - * * Author: Abraham vd Merwe <abraham@2d3d.co.za> * * Copyright (c) 2001, 2d3D, Inc. diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index b402269301f6..b35c3333e210 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -33,6 +33,7 @@ /* Flash opcodes. */ #define OPCODE_WREN 0x06 /* Write enable */ #define OPCODE_RDSR 0x05 /* Read status register */ +#define OPCODE_WRSR 0x01 /* Write status register 1 byte */ #define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ #define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ #define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ @@ -112,6 +113,17 @@ static int read_sr(struct m25p *flash) return val; } +/* + * Write status register 1 byte + * Returns negative if error occurred. + */ +static int write_sr(struct m25p *flash, u8 val) +{ + flash->command[0] = OPCODE_WRSR; + flash->command[1] = val; + + return spi_write(flash->spi, flash->command, 2); +} /* * Set write enable latch with Write Enable command. @@ -589,6 +601,16 @@ static int __devinit m25p_probe(struct spi_device *spi) mutex_init(&flash->lock); dev_set_drvdata(&spi->dev, flash); + /* + * Atmel serial flash tend to power up + * with the software protection bits set + */ + + if (info->jedec_id >> 16 == 0x1f) { + write_enable(flash); + write_sr(flash, 0); + } + if (data && data->name) flash->mtd.name = data->name; else diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index 9cff119a2024..6a9a24a80a6d 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c @@ -5,8 +5,6 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. - * - * $Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $ */ #include <linux/init.h> diff --git a/drivers/mtd/devices/ms02-nv.h b/drivers/mtd/devices/ms02-nv.h index 8a6eef7cfee3..04deafd3a771 100644 --- a/drivers/mtd/devices/ms02-nv.h +++ b/drivers/mtd/devices/ms02-nv.h @@ -9,8 +9,6 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. - * - * $Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $ */ #include <linux/ioport.h> diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index b35e4813a3a5..54e36bfc2c3b 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -82,7 +82,7 @@ struct dataflash { - u8 command[4]; + uint8_t command[4]; char name[24]; unsigned partitioned:1; @@ -150,7 +150,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) struct spi_transfer x = { .tx_dma = 0, }; struct spi_message msg; unsigned blocksize = priv->page_size << 3; - u8 *command; + uint8_t *command; DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n", spi->dev.bus_id, @@ -182,8 +182,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) pageaddr = pageaddr << priv->page_offset; command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; - command[1] = (u8)(pageaddr >> 16); - command[2] = (u8)(pageaddr >> 8); + command[1] = (uint8_t)(pageaddr >> 16); + command[2] = (uint8_t)(pageaddr >> 8); command[3] = 0; DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n", @@ -234,7 +234,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, struct spi_transfer x[2] = { { .tx_dma = 0, }, }; struct spi_message msg; unsigned int addr; - u8 *command; + uint8_t *command; int status; DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n", @@ -274,9 +274,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, * fewer "don't care" bytes. Both buffers stay unchanged. */ command[0] = OP_READ_CONTINUOUS; - command[1] = (u8)(addr >> 16); - command[2] = (u8)(addr >> 8); - command[3] = (u8)(addr >> 0); + command[1] = (uint8_t)(addr >> 16); + command[2] = (uint8_t)(addr >> 8); + command[3] = (uint8_t)(addr >> 0); /* plus 4 "don't care" bytes */ status = spi_sync(priv->spi, &msg); @@ -311,7 +311,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t remaining = len; u_char *writebuf = (u_char *) buf; int status = -EINVAL; - u8 *command; + uint8_t *command; DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n", spi->dev.bus_id, (unsigned)to, (unsigned)(to + len)); @@ -487,7 +487,9 @@ add_dataflash(struct spi_device *spi, char *name, device->write = dataflash_write; device->priv = priv; - dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024); + dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, " + "erasesize %d bytes\n", name, device->size/1024, + pagesize, pagesize * 8); /* 8 pages = 1 block */ dev_set_drvdata(&spi->dev, priv); if (mtd_has_partitions()) { @@ -521,7 +523,7 @@ add_dataflash(struct spi_device *spi, char *name, * * Device Density ID code #Pages PageSize Offset * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 - * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9 + * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 @@ -529,9 +531,114 @@ add_dataflash(struct spi_device *spi, char *name, * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 */ + +struct flash_info { + char *name; + + /* JEDEC id zero means "no ID" (most older chips); otherwise it has + * a high byte of zero plus three data bytes: the manufacturer id, + * then a two byte device id. + */ + uint32_t jedec_id; + + /* The size listed here is what works with OPCODE_SE, which isn't + * necessarily called a "sector" by the vendor. + */ + unsigned nr_pages; + uint16_t pagesize; + uint16_t pageoffset; + + uint16_t flags; +#define SUP_POW2PS 0x02 +#define IS_POW2PS 0x01 +}; + +static struct flash_info __devinitdata dataflash_data [] = { + + { "at45db011d", 0x1f2200, 512, 264, 9, SUP_POW2PS}, + { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "at45db021d", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, + { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "at45db041d", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, + { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "at45db081d", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, + { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "at45db161d", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, + { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, + + { "at45db321c", 0x1f2700, 8192, 528, 10, }, + + { "at45db321d", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, + { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, + + { "at45db641d", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, + { "at45db641d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, +}; + +static struct flash_info *__devinit jedec_probe(struct spi_device *spi) +{ + int tmp; + uint8_t code = OP_READ_ID; + uint8_t id[3]; + uint32_t jedec; + struct flash_info *info; + int status; + + + /* JEDEC also defines an optional "extended device information" + * string for after vendor-specific data, after the three bytes + * we use here. Supporting some chips might require using it. + */ + tmp = spi_write_then_read(spi, &code, 1, id, 3); + if (tmp < 0) { + DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", + spi->dev.bus_id, tmp); + return NULL; + } + jedec = id[0]; + jedec = jedec << 8; + jedec |= id[1]; + jedec = jedec << 8; + jedec |= id[2]; + + for (tmp = 0, info = dataflash_data; + tmp < ARRAY_SIZE(dataflash_data); + tmp++, info++) { + if (info->jedec_id == jedec) { + if (info->flags & SUP_POW2PS) { + status = dataflash_status(spi); + if (status & 0x1) + /* return power of 2 pagesize */ + return ++info; + else + return info; + } + } + } + return NULL; +} + static int __devinit dataflash_probe(struct spi_device *spi) { int status; + struct flash_info *info; + + /* + * Try to detect dataflash by JEDEC ID. + * If it succeeds we know we have either a C or D part. + * D will support power of 2 pagesize option. + */ + + info = jedec_probe(spi); + + if (info != NULL) + return add_dataflash(spi, info->name, info->nr_pages, + info->pagesize, info->pageoffset); + status = dataflash_status(spi); if (status <= 0 || status == 0xff) { @@ -551,16 +658,16 @@ static int __devinit dataflash_probe(struct spi_device *spi) status = add_dataflash(spi, "AT45DB011B", 512, 264, 9); break; case 0x14: /* 0 1 0 1 x x */ - status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9); + status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9); break; case 0x1c: /* 0 1 1 1 x x */ - status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9); + status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9); break; case 0x24: /* 1 0 0 1 x x */ status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9); break; case 0x2c: /* 1 0 1 1 x x */ - status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10); + status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10); break; case 0x34: /* 1 1 0 1 x x */ status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10); diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index 0399be178620..3aaca88847d3 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -1,6 +1,5 @@ /* * mtdram - a test mtd device - * $Id: mtdram.c,v 1.37 2005/04/21 03:42:11 joern Exp $ * Author: Alexander Larsson <alex@cendio.se> * * Copyright (c) 1999 Alexander Larsson <alex@cendio.se> diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index c7987b1c5e01..088fbb7595b5 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -1,6 +1,4 @@ /** - * $Id: phram.c,v 1.16 2005/11/07 11:14:25 gleixner Exp $ - * * Copyright (c) ???? Jochen Schäuble <psionic@psionic.de> * Copyright (c) 2003-2004 Joern Engel <joern@wh.fh-wedel.de> * diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index bc9981749064..d38bca64bb15 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -1,6 +1,4 @@ /* - * $Id: pmc551.c,v 1.32 2005/11/07 11:14:25 gleixner Exp $ - * * PMC551 PCI Mezzanine Ram Device * * Author: diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index cb86db746f28..a425d09f35a0 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -1,7 +1,5 @@ /*====================================================================== - $Id: slram.c,v 1.36 2005/11/07 11:14:25 gleixner Exp $ - This driver provides a method to access memory not used by the kernel itself (i.e. if the kernel commandline mem=xxx is used). To actually use slram at least mtdblock or mtdchar is required (for block or |