summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
-rw-r--r--drivers/mmc/host/sdhci.c854
1 files changed, 786 insertions, 68 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5d20661bc357..58d5436ff649 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -38,13 +38,16 @@
#define SDHCI_USE_LEDS_CLASS
#endif
+#define MAX_TUNING_LOOP 40
+
static unsigned int debug_quirks = 0;
-static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
static void sdhci_finish_data(struct sdhci_host *);
static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
static void sdhci_finish_command(struct sdhci_host *);
+static int sdhci_execute_tuning(struct mmc_host *mmc);
+static void sdhci_tuning_timer(unsigned long data);
static void sdhci_dumpregs(struct sdhci_host *host)
{
@@ -84,6 +87,8 @@ static void sdhci_dumpregs(struct sdhci_host *host)
printk(KERN_DEBUG DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
sdhci_readw(host, SDHCI_COMMAND),
sdhci_readl(host, SDHCI_MAX_CURRENT));
+ printk(KERN_DEBUG DRIVER_NAME ": Host ctl2: 0x%08x\n",
+ sdhci_readw(host, SDHCI_HOST_CONTROL2));
if (host->flags & SDHCI_USE_ADMA)
printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
@@ -157,6 +162,9 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+ if (host->ops->platform_reset_enter)
+ host->ops->platform_reset_enter(host, mask);
+
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
if (mask & SDHCI_RESET_ALL)
@@ -177,6 +185,9 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
mdelay(1);
}
+ if (host->ops->platform_reset_exit)
+ host->ops->platform_reset_exit(host, mask);
+
if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
}
@@ -591,9 +602,10 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
data->sg_len, direction);
}
-static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
+static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
{
u8 count;
+ struct mmc_data *data = cmd->data;
unsigned target_timeout, current_timeout;
/*
@@ -605,9 +617,16 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
return 0xE;
+ /* Unspecified timeout, assume max */
+ if (!data && !cmd->cmd_timeout_ms)
+ return 0xE;
+
/* timeout in us */
- target_timeout = data->timeout_ns / 1000 +
- data->timeout_clks / host->clock;
+ if (!data)
+ target_timeout = cmd->cmd_timeout_ms * 1000;
+ else
+ target_timeout = data->timeout_ns / 1000 +
+ data->timeout_clks / host->clock;
if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
host->timeout_clk = host->clock / 1000;
@@ -622,6 +641,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
* =>
* (1) / (2) > 2^6
*/
+ BUG_ON(!host->timeout_clk);
count = 0;
current_timeout = (1 << 13) * 1000 / host->timeout_clk;
while (current_timeout < target_timeout) {
@@ -632,8 +652,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
}
if (count >= 0xF) {
- printk(KERN_WARNING "%s: Too large timeout requested!\n",
- mmc_hostname(host->mmc));
+ printk(KERN_WARNING "%s: Too large timeout requested for CMD%d!\n",
+ mmc_hostname(host->mmc), cmd->opcode);
count = 0xE;
}
@@ -651,15 +671,21 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
}
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
{
u8 count;
u8 ctrl;
+ struct mmc_data *data = cmd->data;
int ret;
WARN_ON(host->data);
- if (data == NULL)
+ if (data || (cmd->flags & MMC_RSP_BUSY)) {
+ count = sdhci_calc_timeout(host, cmd);
+ sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+ }
+
+ if (!data)
return;
/* Sanity checks */
@@ -669,9 +695,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
host->data = data;
host->data_early = 0;
-
- count = sdhci_calc_timeout(host, data);
- sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+ host->data->bytes_xfered = 0;
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
host->flags |= SDHCI_REQ_USE_DMA;
@@ -807,15 +831,17 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
sdhci_set_transfer_irqs(host);
- /* We do not handle DMA boundaries, so set it to max (512 KiB) */
- sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, data->blksz), SDHCI_BLOCK_SIZE);
+ /* Set the DMA boundary value and block size */
+ sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
+ data->blksz), SDHCI_BLOCK_SIZE);
sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
}
static void sdhci_set_transfer_mode(struct sdhci_host *host,
- struct mmc_data *data)
+ struct mmc_command *cmd)
{
u16 mode;
+ struct mmc_data *data = cmd->data;
if (data == NULL)
return;
@@ -823,12 +849,20 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
WARN_ON(!host->data);
mode = SDHCI_TRNS_BLK_CNT_EN;
- if (data->blocks > 1) {
- if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
- mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
- else
- mode |= SDHCI_TRNS_MULTI;
+ if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
+ mode |= SDHCI_TRNS_MULTI;
+ /*
+ * If we are sending CMD23, CMD12 never gets sent
+ * on successful completion (so no Auto-CMD12).
+ */
+ if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12))
+ mode |= SDHCI_TRNS_AUTO_CMD12;
+ else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
+ mode |= SDHCI_TRNS_AUTO_CMD23;
+ sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
+ }
}
+
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
if (host->flags & SDHCI_REQ_USE_DMA)
@@ -868,7 +902,15 @@ static void sdhci_finish_data(struct sdhci_host *host)
else
data->bytes_xfered = data->blksz * data->blocks;
- if (data->stop) {
+ /*
+ * Need to send CMD12 if -
+ * a) open-ended multiblock transfer (no CMD23)
+ * b) error in multiblock transfer
+ */
+ if (data->stop &&
+ (data->error ||
+ !host->mrq->sbc)) {
+
/*
* The controller needs a reset of internal state machines
* upon error conditions.
@@ -920,11 +962,11 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
host->cmd = cmd;
- sdhci_prepare_data(host, cmd->data);
+ sdhci_prepare_data(host, cmd);
sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
- sdhci_set_transfer_mode(host, cmd->data);
+ sdhci_set_transfer_mode(host, cmd);
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
printk(KERN_ERR "%s: Unsupported response type!\n",
@@ -947,7 +989,9 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
flags |= SDHCI_CMD_CRC;
if (cmd->flags & MMC_RSP_OPCODE)
flags |= SDHCI_CMD_INDEX;
- if (cmd->data)
+
+ /* CMD19 is special in that the Data Present Select should be set */
+ if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK))
flags |= SDHCI_CMD_DATA;
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
@@ -977,19 +1021,27 @@ static void sdhci_finish_command(struct sdhci_host *host)
host->cmd->error = 0;
- if (host->data && host->data_early)
- sdhci_finish_data(host);
+ /* Finished CMD23, now send actual command. */
+ if (host->cmd == host->mrq->sbc) {
+ host->cmd = NULL;
+ sdhci_send_command(host, host->mrq->cmd);
+ } else {
- if (!host->cmd->data)
- tasklet_schedule(&host->finish_tasklet);
+ /* Processed actual command. */
+ if (host->data && host->data_early)
+ sdhci_finish_data(host);
- host->cmd = NULL;
+ if (!host->cmd->data)
+ tasklet_schedule(&host->finish_tasklet);
+
+ host->cmd = NULL;
+ }
}
static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
- int div;
- u16 clk;
+ int div = 0; /* Initialized for compiler warning */
+ u16 clk = 0;
unsigned long timeout;
if (clock == host->clock)
@@ -1007,14 +1059,45 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
goto out;
if (host->version >= SDHCI_SPEC_300) {
- /* Version 3.00 divisors must be a multiple of 2. */
- if (host->max_clk <= clock)
- div = 1;
- else {
- for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) {
- if ((host->max_clk / div) <= clock)
- break;
+ /*
+ * Check if the Host Controller supports Programmable Clock
+ * Mode.
+ */
+ if (host->clk_mul) {
+ u16 ctrl;
+
+ /*
+ * We need to figure out whether the Host Driver needs
+ * to select Programmable Clock Mode, or the value can
+ * be set automatically by the Host Controller based on
+ * the Preset Value registers.
+ */
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+ for (div = 1; div <= 1024; div++) {
+ if (((host->max_clk * host->clk_mul) /
+ div) <= clock)
+ break;
+ }
+ /*
+ * Set Programmable Clock Mode in the Clock
+ * Control register.
+ */
+ clk = SDHCI_PROG_CLOCK_MODE;
+ div--;
}
+ } else {
+ /* Version 3.00 divisors must be a multiple of 2. */
+ if (host->max_clk <= clock)
+ div = 1;
+ else {
+ for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
+ div += 2) {
+ if ((host->max_clk / div) <= clock)
+ break;
+ }
+ }
+ div >>= 1;
}
} else {
/* Version 2.00 divisors must be a power of 2. */
@@ -1022,10 +1105,10 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
if ((host->max_clk / div) <= clock)
break;
}
+ div >>= 1;
}
- div >>= 1;
- clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
+ clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
<< SDHCI_DIVIDER_HI_SHIFT;
clk |= SDHCI_CLOCK_INT_EN;
@@ -1131,7 +1214,12 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
#ifndef SDHCI_USE_LEDS_CLASS
sdhci_activate_led(host);
#endif
- if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) {
+
+ /*
+ * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED
+ * requests if Auto-CMD12 is enabled.
+ */
+ if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) {
if (mrq->stop) {
mrq->data->stop = NULL;
mrq->stop = NULL;
@@ -1150,8 +1238,30 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
if (!present || host->flags & SDHCI_DEVICE_DEAD) {
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
- } else
- sdhci_send_command(host, mrq->cmd);
+ } else {
+ u32 present_state;
+
+ present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ /*
+ * Check if the re-tuning timer has already expired and there
+ * is no on-going data transfer. If so, we need to execute
+ * tuning procedure before sending command.
+ */
+ if ((host->flags & SDHCI_NEEDS_RETUNING) &&
+ !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_execute_tuning(mmc);
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Restore original mmc_request structure */
+ host->mrq = mrq;
+ }
+
+ if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
+ sdhci_send_command(host, mrq->sbc);
+ else
+ sdhci_send_command(host, mrq->cmd);
+ }
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
@@ -1222,7 +1332,84 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
else
ctrl &= ~SDHCI_CTRL_HISPD;
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ if (host->version >= SDHCI_SPEC_300) {
+ u16 clk, ctrl_2;
+ unsigned int clock;
+
+ /* In case of UHS-I modes, set High Speed Enable */
+ if ((ios->timing == MMC_TIMING_UHS_SDR50) ||
+ (ios->timing == MMC_TIMING_UHS_SDR104) ||
+ (ios->timing == MMC_TIMING_UHS_DDR50) ||
+ (ios->timing == MMC_TIMING_UHS_SDR25) ||
+ (ios->timing == MMC_TIMING_UHS_SDR12))
+ ctrl |= SDHCI_CTRL_HISPD;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ /*
+ * We only need to set Driver Strength if the
+ * preset value enable is not set.
+ */
+ ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
+ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
+ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
+
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+ } else {
+ /*
+ * According to SDHC Spec v3.00, if the Preset Value
+ * Enable in the Host Control 2 register is set, we
+ * need to reset SD Clock Enable before changing High
+ * Speed Enable to avoid generating clock gliches.
+ */
+
+ /* Reset SD Clock Enable */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+
+ /* Re-enable SD Clock */
+ clock = host->clock;
+ host->clock = 0;
+ sdhci_set_clock(host, clock);
+ }
+
+
+ /* Reset SD Clock Enable */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ if (host->ops->set_uhs_signaling)
+ host->ops->set_uhs_signaling(host, ios->timing);
+ else {
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if (ios->timing == MMC_TIMING_UHS_SDR12)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ else if (ios->timing == MMC_TIMING_UHS_SDR25)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (ios->timing == MMC_TIMING_UHS_SDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ else if (ios->timing == MMC_TIMING_UHS_SDR104)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (ios->timing == MMC_TIMING_UHS_DDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+ }
+
+ /* Re-enable SD Clock */
+ clock = host->clock;
+ host->clock = 0;
+ sdhci_set_clock(host, clock);
+ } else
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
/*
* Some (ENE) controllers go apeshit on some ios operation,
@@ -1237,14 +1424,11 @@ out:
spin_unlock_irqrestore(&host->lock, flags);
}
-static int sdhci_get_ro(struct mmc_host *mmc)
+static int check_ro(struct sdhci_host *host)
{
- struct sdhci_host *host;
unsigned long flags;
int is_readonly;
- host = mmc_priv(mmc);
-
spin_lock_irqsave(&host->lock, flags);
if (host->flags & SDHCI_DEVICE_DEAD)
@@ -1262,6 +1446,29 @@ static int sdhci_get_ro(struct mmc_host *mmc)
!is_readonly : is_readonly;
}
+#define SAMPLE_COUNT 5
+
+static int sdhci_get_ro(struct mmc_host *mmc)
+{
+ struct sdhci_host *host;
+ int i, ro_count;
+
+ host = mmc_priv(mmc);
+
+ if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
+ return check_ro(host);
+
+ ro_count = 0;
+ for (i = 0; i < SAMPLE_COUNT; i++) {
+ if (check_ro(host)) {
+ if (++ro_count > SAMPLE_COUNT / 2)
+ return 1;
+ }
+ msleep(30);
+ }
+ return 0;
+}
+
static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
struct sdhci_host *host;
@@ -1284,11 +1491,322 @@ out:
spin_unlock_irqrestore(&host->lock, flags);
}
+static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct sdhci_host *host;
+ u8 pwr;
+ u16 clk, ctrl;
+ u32 present_state;
+
+ host = mmc_priv(mmc);
+
+ /*
+ * Signal Voltage Switching is only applicable for Host Controllers
+ * v3.00 and above.
+ */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ /*
+ * We first check whether the request is to set signalling voltage
+ * to 3.3V. If so, we change the voltage to 3.3V and return quickly.
+ */
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
+ /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
+ ctrl &= ~SDHCI_CTRL_VDD_180;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ /* Wait for 5ms */
+ usleep_range(5000, 5500);
+
+ /* 3.3V regulator output should be stable within 5 ms */
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl & SDHCI_CTRL_VDD_180))
+ return 0;
+ else {
+ printk(KERN_INFO DRIVER_NAME ": Switching to 3.3V "
+ "signalling voltage failed\n");
+ return -EIO;
+ }
+ } else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
+ (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)) {
+ /* Stop SDCLK */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Check whether DAT[3:0] is 0000 */
+ present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ if (!((present_state & SDHCI_DATA_LVL_MASK) >>
+ SDHCI_DATA_LVL_SHIFT)) {
+ /*
+ * Enable 1.8V Signal Enable in the Host Control2
+ * register
+ */
+ ctrl |= SDHCI_CTRL_VDD_180;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ /* Wait for 5ms */
+ usleep_range(5000, 5500);
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (ctrl & SDHCI_CTRL_VDD_180) {
+ /* Provide SDCLK again and wait for 1ms*/
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+ usleep_range(1000, 1500);
+
+ /*
+ * If DAT[3:0] level is 1111b, then the card
+ * was successfully switched to 1.8V signaling.
+ */
+ present_state = sdhci_readl(host,
+ SDHCI_PRESENT_STATE);
+ if ((present_state & SDHCI_DATA_LVL_MASK) ==
+ SDHCI_DATA_LVL_MASK)
+ return 0;
+ }
+ }
+
+ /*
+ * If we are here, that means the switch to 1.8V signaling
+ * failed. We power cycle the card, and retry initialization
+ * sequence by setting S18R to 0.
+ */
+ pwr = sdhci_readb(host, SDHCI_POWER_CONTROL);
+ pwr &= ~SDHCI_POWER_ON;
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+ /* Wait for 1ms as per the spec */
+ usleep_range(1000, 1500);
+ pwr |= SDHCI_POWER_ON;
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+ printk(KERN_INFO DRIVER_NAME ": Switching to 1.8V signalling "
+ "voltage failed, retrying with S18R set to 0\n");
+ return -EAGAIN;
+ } else
+ /* No signal voltage switch required */
+ return 0;
+}
+
+static int sdhci_execute_tuning(struct mmc_host *mmc)
+{
+ struct sdhci_host *host;
+ u16 ctrl;
+ u32 ier;
+ int tuning_loop_counter = MAX_TUNING_LOOP;
+ unsigned long timeout;
+ int err = 0;
+
+ host = mmc_priv(mmc);
+
+ disable_irq(host->irq);
+ spin_lock(&host->lock);
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+ /*
+ * Host Controller needs tuning only in case of SDR104 mode
+ * and for SDR50 mode when Use Tuning for SDR50 is set in
+ * Capabilities register.
+ */
+ if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
+ (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
+ (host->flags & SDHCI_SDR50_NEEDS_TUNING)))
+ ctrl |= SDHCI_CTRL_EXEC_TUNING;
+ else {
+ spin_unlock(&host->lock);
+ enable_irq(host->irq);
+ return 0;
+ }
+
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ /*
+ * As per the Host Controller spec v3.00, tuning command
+ * generates Buffer Read Ready interrupt, so enable that.
+ *
+ * Note: The spec clearly says that when tuning sequence
+ * is being performed, the controller does not generate
+ * interrupts other than Buffer Read Ready interrupt. But
+ * to make sure we don't hit a controller bug, we _only_
+ * enable Buffer Read Ready interrupt here.
+ */
+ ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+ sdhci_clear_set_irqs(host, ier, SDHCI_INT_DATA_AVAIL);
+
+ /*
+ * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
+ * of loops reaches 40 times or a timeout of 150ms occurs.
+ */
+ timeout = 150;
+ do {
+ struct mmc_command cmd = {0};
+ struct mmc_request mrq = {0};
+
+ if (!tuning_loop_counter && !timeout)
+ break;
+
+ cmd.opcode = MMC_SEND_TUNING_BLOCK;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+ cmd.retries = 0;
+ cmd.data = NULL;
+ cmd.error = 0;
+
+ mrq.cmd = &cmd;
+ host->mrq = &mrq;
+
+ /*
+ * In response to CMD19, the card sends 64 bytes of tuning
+ * block to the Host Controller. So we set the block size
+ * to 64 here.
+ */
+ sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), SDHCI_BLOCK_SIZE);
+
+ /*
+ * The tuning block is sent by the card to the host controller.
+ * So we set the TRNS_READ bit in the Transfer Mode register.
+ * This also takes care of setting DMA Enable and Multi Block
+ * Select in the same register to 0.
+ */
+ sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
+
+ sdhci_send_command(host, &cmd);
+
+ host->cmd = NULL;
+ host->mrq = NULL;
+
+ spin_unlock(&host->lock);
+ enable_irq(host->irq);
+
+ /* Wait for Buffer Read Ready interrupt */
+ wait_event_interruptible_timeout(host->buf_ready_int,
+ (host->tuning_done == 1),
+ msecs_to_jiffies(50));
+ disable_irq(host->irq);
+ spin_lock(&host->lock);
+
+ if (!host->tuning_done) {
+ printk(KERN_INFO DRIVER_NAME ": Timeout waiting for "
+ "Buffer Read Ready interrupt during tuning "
+ "procedure, falling back to fixed sampling "
+ "clock\n");
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl &= ~SDHCI_CTRL_TUNED_CLK;
+ ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ err = -EIO;
+ goto out;
+ }
+
+ host->tuning_done = 0;
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ tuning_loop_counter--;
+ timeout--;
+ mdelay(1);
+ } while (ctrl & SDHCI_CTRL_EXEC_TUNING);
+
+ /*
+ * The Host Driver has exhausted the maximum number of loops allowed,
+ * so use fixed sampling frequency.
+ */
+ if (!tuning_loop_counter || !timeout) {
+ ctrl &= ~SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+ } else {
+ if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
+ printk(KERN_INFO DRIVER_NAME ": Tuning procedure"
+ " failed, falling back to fixed sampling"
+ " clock\n");
+ err = -EIO;
+ }
+ }
+
+out:
+ /*
+ * If this is the very first time we are here, we start the retuning
+ * timer. Since only during the first time, SDHCI_NEEDS_RETUNING
+ * flag won't be set, we check this condition before actually starting
+ * the timer.
+ */
+ if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count &&
+ (host->tuning_mode == SDHCI_TUNING_MODE_1)) {
+ mod_timer(&host->tuning_timer, jiffies +
+ host->tuning_count * HZ);
+ /* Tuning mode 1 limits the maximum data length to 4MB */
+ mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size;
+ } else {
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+ /* Reload the new initial value for timer */
+ if (host->tuning_mode == SDHCI_TUNING_MODE_1)
+ mod_timer(&host->tuning_timer, jiffies +
+ host->tuning_count * HZ);
+ }
+
+ /*
+ * In case tuning fails, host controllers which support re-tuning can
+ * try tuning again at a later time, when the re-tuning timer expires.
+ * So for these controllers, we return 0. Since there might be other
+ * controllers who do not have this capability, we return error for
+ * them.
+ */
+ if (err && host->tuning_count &&
+ host->tuning_mode == SDHCI_TUNING_MODE_1)
+ err = 0;
+
+ sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
+ spin_unlock(&host->lock);
+ enable_irq(host->irq);
+
+ return err;
+}
+
+static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable)
+{
+ struct sdhci_host *host;
+ u16 ctrl;
+ unsigned long flags;
+
+ host = mmc_priv(mmc);
+
+ /* Host Controller v3.00 defines preset value registers */
+ if (host->version < SDHCI_SPEC_300)
+ return;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+ /*
+ * We only enable or disable Preset Value if they are not already
+ * enabled or disabled respectively. Otherwise, we bail out.
+ */
+ if (enable && !(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+ ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+ } else if (!enable && (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+ ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
static const struct mmc_host_ops sdhci_ops = {
.request = sdhci_request,
.set_ios = sdhci_set_ios,
.get_ro = sdhci_get_ro,
.enable_sdio_irq = sdhci_enable_sdio_irq,
+ .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
+ .execute_tuning = sdhci_execute_tuning,
+ .enable_preset_value = sdhci_enable_preset_value,
};
/*****************************************************************************\
@@ -1345,6 +1863,9 @@ static void sdhci_tasklet_finish(unsigned long param)
del_timer(&host->timer);
+ if (host->version >= SDHCI_SPEC_300)
+ del_timer(&host->tuning_timer);
+
mrq = host->mrq;
/*
@@ -1418,6 +1939,20 @@ static void sdhci_timeout_timer(unsigned long data)
spin_unlock_irqrestore(&host->lock, flags);
}
+static void sdhci_tuning_timer(unsigned long data)
+{
+ struct sdhci_host *host;
+ unsigned long flags;
+
+ host = (struct sdhci_host *)data;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->flags |= SDHCI_NEEDS_RETUNING;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
/*****************************************************************************\
* *
* Interrupt handling *
@@ -1506,6 +2041,16 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
{
BUG_ON(intmask == 0);
+ /* CMD19 generates _only_ Buffer Read Ready interrupt */
+ if (intmask & SDHCI_INT_DATA_AVAIL) {
+ if (SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) ==
+ MMC_SEND_TUNING_BLOCK) {
+ host->tuning_done = 1;
+ wake_up(&host->buf_ready_int);
+ return;
+ }
+ }
+
if (!host->data) {
/*
* The "data complete" interrupt is also used to
@@ -1551,10 +2096,28 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
* We currently don't do anything fancy with DMA
* boundaries, but as we can't disable the feature
* we need to at least restart the transfer.
+ *
+ * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS)
+ * should return a valid address to continue from, but as
+ * some controllers are faulty, don't trust them.
*/
- if (intmask & SDHCI_INT_DMA_END)
- sdhci_writel(host, sdhci_readl(host, SDHCI_DMA_ADDRESS),
- SDHCI_DMA_ADDRESS);
+ if (intmask & SDHCI_INT_DMA_END) {
+ u32 dmastart, dmanow;
+ dmastart = sg_dma_address(host->data->sg);
+ dmanow = dmastart + host->data->bytes_xfered;
+ /*
+ * Force update to the next DMA block boundary.
+ */
+ dmanow = (dmanow &
+ ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+ SDHCI_DEFAULT_BOUNDARY_SIZE;
+ host->data->bytes_xfered = dmanow - dmastart;
+ DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
+ " next 0x%08x\n",
+ mmc_hostname(host->mmc), dmastart,
+ host->data->bytes_xfered, dmanow);
+ sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+ }
if (intmask & SDHCI_INT_DATA_END) {
if (host->cmd) {
@@ -1664,6 +2227,14 @@ int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
sdhci_disable_card_detection(host);
+ /* Disable tuning since we are suspending */
+ if (host->version >= SDHCI_SPEC_300 && host->tuning_count &&
+ host->tuning_mode == SDHCI_TUNING_MODE_1) {
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+ mod_timer(&host->tuning_timer, jiffies +
+ host->tuning_count * HZ);
+ }
+
ret = mmc_suspend_host(host->mmc);
if (ret)
return ret;
@@ -1705,6 +2276,11 @@ int sdhci_resume_host(struct sdhci_host *host)
ret = mmc_resume_host(host->mmc);
sdhci_enable_card_detection(host);
+ /* Set the re-tuning expiration flag */
+ if ((host->version >= SDHCI_SPEC_300) && host->tuning_count &&
+ (host->tuning_mode == SDHCI_TUNING_MODE_1))
+ host->flags |= SDHCI_NEEDS_RETUNING;
+
return ret;
}
@@ -1751,7 +2327,9 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host);
int sdhci_add_host(struct sdhci_host *host)
{
struct mmc_host *mmc;
- unsigned int caps, ocr_avail;
+ u32 caps[2];
+ u32 max_current_caps;
+ unsigned int ocr_avail;
int ret;
WARN_ON(host == NULL);
@@ -1774,12 +2352,15 @@ int sdhci_add_host(struct sdhci_host *host)
host->version);
}
- caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
+ caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
sdhci_readl(host, SDHCI_CAPABILITIES);
+ caps[1] = (host->version >= SDHCI_SPEC_300) ?
+ sdhci_readl(host, SDHCI_CAPABILITIES_1) : 0;
+
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
- else if (!(caps & SDHCI_CAN_DO_SDMA))
+ else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
DBG("Controller doesn't have SDMA capability\n");
else
host->flags |= SDHCI_USE_SDMA;
@@ -1790,7 +2371,8 @@ int sdhci_add_host(struct sdhci_host *host)
host->flags &= ~SDHCI_USE_SDMA;
}
- if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2))
+ if ((host->version >= SDHCI_SPEC_200) &&
+ (caps[0] & SDHCI_CAN_DO_ADMA2))
host->flags |= SDHCI_USE_ADMA;
if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
@@ -1840,10 +2422,10 @@ int sdhci_add_host(struct sdhci_host *host)
}
if (host->version >= SDHCI_SPEC_300)
- host->max_clk = (caps & SDHCI_CLOCK_V3_BASE_MASK)
+ host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK)
>> SDHCI_CLOCK_BASE_SHIFT;
else
- host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK)
+ host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK)
>> SDHCI_CLOCK_BASE_SHIFT;
host->max_clk *= 1000000;
@@ -1859,7 +2441,7 @@ int sdhci_add_host(struct sdhci_host *host)
}
host->timeout_clk =
- (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+ (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
if (host->timeout_clk == 0) {
if (host->ops->get_timeout_clock) {
host->timeout_clk = host->ops->get_timeout_clock(host);
@@ -1871,22 +2453,55 @@ int sdhci_add_host(struct sdhci_host *host)
return -ENODEV;
}
}
- if (caps & SDHCI_TIMEOUT_CLK_UNIT)
+ if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
/*
+ * In case of Host Controller v3.00, find out whether clock
+ * multiplier is supported.
+ */
+ host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >>
+ SDHCI_CLOCK_MUL_SHIFT;
+
+ /*
+ * In case the value in Clock Multiplier is 0, then programmable
+ * clock mode is not supported, otherwise the actual clock
+ * multiplier is one more than the value of Clock Multiplier
+ * in the Capabilities Register.
+ */
+ if (host->clk_mul)
+ host->clk_mul += 1;
+
+ /*
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
+ mmc->f_max = host->max_clk;
if (host->ops->get_min_clock)
mmc->f_min = host->ops->get_min_clock(host);
- else if (host->version >= SDHCI_SPEC_300)
- mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
- else
+ else if (host->version >= SDHCI_SPEC_300) {
+ if (host->clk_mul) {
+ mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
+ mmc->f_max = host->max_clk * host->clk_mul;
+ } else
+ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
+ } else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
- mmc->f_max = host->max_clk;
- mmc->caps |= MMC_CAP_SDIO_IRQ;
+ mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
+
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
+ host->flags |= SDHCI_AUTO_CMD12;
+
+ /* Auto-CMD23 stuff only works in ADMA or PIO. */
+ if ((host->version >= SDHCI_SPEC_300) &&
+ ((host->flags & SDHCI_USE_ADMA) ||
+ !(host->flags & SDHCI_USE_SDMA))) {
+ host->flags |= SDHCI_AUTO_CMD23;
+ DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
+ } else {
+ DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
+ }
/*
* A controller may support 8-bit width, but the board itself
@@ -1898,21 +2513,113 @@ int sdhci_add_host(struct sdhci_host *host)
if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
mmc->caps |= MMC_CAP_4_BIT_DATA;
- if (caps & SDHCI_CAN_DO_HISPD)
+ if (caps[0] & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
mmc_card_is_removable(mmc))
mmc->caps |= MMC_CAP_NEEDS_POLL;
+ /* UHS-I mode(s) supported by the host controller. */
+ if (host->version >= SDHCI_SPEC_300)
+ mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
+
+ /* SDR104 supports also implies SDR50 support */
+ if (caps[1] & SDHCI_SUPPORT_SDR104)
+ mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
+ else if (caps[1] & SDHCI_SUPPORT_SDR50)
+ mmc->caps |= MMC_CAP_UHS_SDR50;
+
+ if (caps[1] & SDHCI_SUPPORT_DDR50)
+ mmc->caps |= MMC_CAP_UHS_DDR50;
+
+ /* Does the host needs tuning for SDR50? */
+ if (caps[1] & SDHCI_USE_SDR50_TUNING)
+ host->flags |= SDHCI_SDR50_NEEDS_TUNING;
+
+ /* Driver Type(s) (A, C, D) supported by the host */
+ if (caps[1] & SDHCI_DRIVER_TYPE_A)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
+ if (caps[1] & SDHCI_DRIVER_TYPE_C)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
+ if (caps[1] & SDHCI_DRIVER_TYPE_D)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
+
+ /* Initial value for re-tuning timer count */
+ host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
+ SDHCI_RETUNING_TIMER_COUNT_SHIFT;
+
+ /*
+ * In case Re-tuning Timer is not disabled, the actual value of
+ * re-tuning timer will be 2 ^ (n - 1).
+ */
+ if (host->tuning_count)
+ host->tuning_count = 1 << (host->tuning_count - 1);
+
+ /* Re-tuning mode supported by the Host Controller */
+ host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >>
+ SDHCI_RETUNING_MODE_SHIFT;
+
ocr_avail = 0;
- if (caps & SDHCI_CAN_VDD_330)
+ /*
+ * According to SD Host Controller spec v3.00, if the Host System
+ * can afford more than 150mA, Host Driver should set XPC to 1. Also
+ * the value is meaningful only if Voltage Support in the Capabilities
+ * register is set. The actual current value is 4 times the register
+ * value.
+ */
+ max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
+
+ if (caps[0] & SDHCI_CAN_VDD_330) {
+ int max_current_330;
+
ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
- if (caps & SDHCI_CAN_VDD_300)
+
+ max_current_330 = ((max_current_caps &
+ SDHCI_MAX_CURRENT_330_MASK) >>
+ SDHCI_MAX_CURRENT_330_SHIFT) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+
+ if (max_current_330 > 150)
+ mmc->caps |= MMC_CAP_SET_XPC_330;
+ }
+ if (caps[0] & SDHCI_CAN_VDD_300) {
+ int max_current_300;
+
ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
- if (caps & SDHCI_CAN_VDD_180)
+
+ max_current_300 = ((max_current_caps &
+ SDHCI_MAX_CURRENT_300_MASK) >>
+ SDHCI_MAX_CURRENT_300_SHIFT) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+
+ if (max_current_300 > 150)
+ mmc->caps |= MMC_CAP_SET_XPC_300;
+ }
+ if (caps[0] & SDHCI_CAN_VDD_180) {
+ int max_current_180;
+
ocr_avail |= MMC_VDD_165_195;
+ max_current_180 = ((max_current_caps &
+ SDHCI_MAX_CURRENT_180_MASK) >>
+ SDHCI_MAX_CURRENT_180_SHIFT) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+
+ if (max_current_180 > 150)
+ mmc->caps |= MMC_CAP_SET_XPC_180;
+
+ /* Maximum current capabilities of the host at 1.8V */
+ if (max_current_180 >= 800)
+ mmc->caps |= MMC_CAP_MAX_CURRENT_800;
+ else if (max_current_180 >= 600)
+ mmc->caps |= MMC_CAP_MAX_CURRENT_600;
+ else if (max_current_180 >= 400)
+ mmc->caps |= MMC_CAP_MAX_CURRENT_400;
+ else
+ mmc->caps |= MMC_CAP_MAX_CURRENT_200;
+ }
+
mmc->ocr_avail = ocr_avail;
mmc->ocr_avail_sdio = ocr_avail;
if (host->ocr_avail_sdio)
@@ -1972,7 +2679,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
mmc->max_blk_size = 2;
} else {
- mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >>
+ mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
SDHCI_MAX_BLOCK_SHIFT;
if (mmc->max_blk_size >= 3) {
printk(KERN_WARNING "%s: Invalid maximum block size, "
@@ -1998,6 +2705,15 @@ int sdhci_add_host(struct sdhci_host *host)
setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
+ if (host->version >= SDHCI_SPEC_300) {
+ init_waitqueue_head(&host->buf_ready_int);
+
+ /* Initialize re-tuning timer */
+ init_timer(&host->tuning_timer);
+ host->tuning_timer.data = (unsigned long)host;
+ host->tuning_timer.function = sdhci_tuning_timer;
+ }
+
ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
mmc_hostname(mmc), host);
if (ret)
@@ -2091,6 +2807,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
free_irq(host->irq, host);
del_timer_sync(&host->timer);
+ if (host->version >= SDHCI_SPEC_300)
+ del_timer_sync(&host->tuning_timer);
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 12:21:41 +0000