diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-pci-gli.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-gli.c | 352 |
1 files changed, 352 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c new file mode 100644 index 000000000000..5eea8d70a85d --- /dev/null +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -0,0 +1,352 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Genesys Logic, Inc. + * + * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw> + * + * Version: v0.9.0 (2019-08-08) + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/pci.h> +#include <linux/mmc/mmc.h> +#include <linux/delay.h> +#include "sdhci.h" +#include "sdhci-pci.h" + +/* Genesys Logic extra registers */ +#define SDHCI_GLI_9750_WT 0x800 +#define SDHCI_GLI_9750_WT_EN BIT(0) +#define GLI_9750_WT_EN_ON 0x1 +#define GLI_9750_WT_EN_OFF 0x0 + +#define SDHCI_GLI_9750_DRIVING 0x860 +#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0) +#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26) +#define GLI_9750_DRIVING_1_VALUE 0xFFF +#define GLI_9750_DRIVING_2_VALUE 0x3 + +#define SDHCI_GLI_9750_PLL 0x864 +#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23) +#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20) +#define GLI_9750_PLL_TX2_INV_VALUE 0x1 +#define GLI_9750_PLL_TX2_DLY_VALUE 0x0 + +#define SDHCI_GLI_9750_SW_CTRL 0x874 +#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6) +#define GLI_9750_SW_CTRL_4_VALUE 0x3 + +#define SDHCI_GLI_9750_MISC 0x878 +#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2) +#define SDHCI_GLI_9750_MISC_RX_INV BIT(3) +#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4) +#define GLI_9750_MISC_TX1_INV_VALUE 0x0 +#define GLI_9750_MISC_RX_INV_ON 0x1 +#define GLI_9750_MISC_RX_INV_OFF 0x0 +#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF +#define GLI_9750_MISC_TX1_DLY_VALUE 0x5 + +#define SDHCI_GLI_9750_TUNING_CONTROL 0x540 +#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4) +#define GLI_9750_TUNING_CONTROL_EN_ON 0x1 +#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0 +#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16) +#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19) +#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1 +#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2 + +#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544 +#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0) +#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1 + +#define GLI_MAX_TUNING_LOOP 40 + +/* Genesys Logic chipset */ +static inline void gl9750_wt_on(struct sdhci_host *host) +{ + u32 wt_value; + u32 wt_enable; + + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); + wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); + + if (wt_enable == GLI_9750_WT_EN_ON) + return; + + wt_value &= ~SDHCI_GLI_9750_WT_EN; + wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON); + + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); +} + +static inline void gl9750_wt_off(struct sdhci_host *host) +{ + u32 wt_value; + u32 wt_enable; + + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); + wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); + + if (wt_enable == GLI_9750_WT_EN_OFF) + return; + + wt_value &= ~SDHCI_GLI_9750_WT_EN; + wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF); + + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); +} + +static void gli_set_9750(struct sdhci_host *host) +{ + u32 driving_value; + u32 pll_value; + u32 sw_ctrl_value; + u32 misc_value; + u32 parameter_value; + u32 control_value; + u16 ctrl2; + + gl9750_wt_on(host); + + driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING); + pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL); + sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL); + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); + parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS); + control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL); + + driving_value &= ~(SDHCI_GLI_9750_DRIVING_1); + driving_value &= ~(SDHCI_GLI_9750_DRIVING_2); + driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1, + GLI_9750_DRIVING_1_VALUE); + driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2, + GLI_9750_DRIVING_2_VALUE); + sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING); + + sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4; + sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4, + GLI_9750_SW_CTRL_4_VALUE); + sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL); + + /* reset the tuning flow after reinit and before starting tuning */ + pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV; + pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY; + pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV, + GLI_9750_PLL_TX2_INV_VALUE); + pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY, + GLI_9750_PLL_TX2_DLY_VALUE); + + misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV; + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; + misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY; + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV, + GLI_9750_MISC_TX1_INV_VALUE); + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, + GLI_9750_MISC_RX_INV_VALUE); + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY, + GLI_9750_MISC_TX1_DLY_VALUE); + + parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY; + parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY, + GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE); + + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1; + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2; + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1, + GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE); + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2, + GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE); + + sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL); + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); + + /* disable tuned clk */ + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); + + /* enable tuning parameters control */ + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, + GLI_9750_TUNING_CONTROL_EN_ON); + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); + + /* write tuning parameters */ + sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS); + + /* disable tuning parameters control */ + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, + GLI_9750_TUNING_CONTROL_EN_OFF); + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); + + /* clear tuned clk */ + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); + + gl9750_wt_off(host); +} + +static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b) +{ + u32 misc_value; + + gl9750_wt_on(host); + + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; + if (b) { + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, + GLI_9750_MISC_RX_INV_ON); + } else { + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, + GLI_9750_MISC_RX_INV_OFF); + } + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); + + gl9750_wt_off(host); +} + +static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode) +{ + int i; + int rx_inv; + + for (rx_inv = 0; rx_inv < 2; rx_inv++) { + gli_set_9750_rx_inv(host, !!rx_inv); + sdhci_start_tuning(host); + + for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) { + u16 ctrl; + + sdhci_send_tuning(host, opcode); + + if (!host->tuning_done) { + sdhci_abort_tuning(host, opcode); + break; + } + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { + if (ctrl & SDHCI_CTRL_TUNED_CLK) + return 0; /* Success! */ + break; + } + } + } + if (!host->tuning_done) { + pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); + return -ETIMEDOUT; + } + + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); + sdhci_reset_tuning(host); + + return -EAGAIN; +} + +static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode) +{ + host->mmc->retune_period = 0; + if (host->tuning_mode == SDHCI_TUNING_MODE_1) + host->mmc->retune_period = host->tuning_count; + + gli_set_9750(host); + host->tuning_err = __sdhci_execute_tuning_9750(host, opcode); + sdhci_end_tuning(host); + + return 0; +} + +static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) +{ + struct sdhci_host *host = slot->host; + + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + sdhci_enable_v4_mode(host); + + return 0; +} + +static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) +{ + struct sdhci_host *host = slot->host; + + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + sdhci_enable_v4_mode(host); + + return 0; +} + +static void sdhci_gli_voltage_switch(struct sdhci_host *host) +{ + /* + * According to Section 3.6.1 signal voltage switch procedure in + * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as + * follows: + * (6) Set 1.8V Signal Enable in the Host Control 2 register. + * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this + * period. + * (8) If 1.8V Signal Enable is cleared by Host Controller, go to + * step (12). + * + * Wait 5ms after set 1.8V signal enable in Host Control 2 register + * to ensure 1.8V signal enable bit is set by GL9750/GL9755. + */ + usleep_range(5000, 5500); +} + +static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + gli_set_9750(host); +} + +static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg) +{ + u32 value; + + value = readl(host->ioaddr + reg); + if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff))) + value |= 0xc8; + + return value; +} + +static const struct sdhci_ops sdhci_gl9755_ops = { + .set_clock = sdhci_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .voltage_switch = sdhci_gli_voltage_switch, +}; + +const struct sdhci_pci_fixes sdhci_gl9755 = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, + .probe_slot = gli_probe_slot_gl9755, + .ops = &sdhci_gl9755_ops, +}; + +static const struct sdhci_ops sdhci_gl9750_ops = { + .read_l = sdhci_gl9750_readl, + .set_clock = sdhci_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_gl9750_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .voltage_switch = sdhci_gli_voltage_switch, + .platform_execute_tuning = gl9750_execute_tuning, +}; + +const struct sdhci_pci_fixes sdhci_gl9750 = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, + .probe_slot = gli_probe_slot_gl9750, + .ops = &sdhci_gl9750_ops, +}; |