summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci-msm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci-msm.c')
-rw-r--r--drivers/mmc/host/sdhci-msm.c618
1 files changed, 618 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
new file mode 100644
index 000000000000..acb0e9eb55f1
--- /dev/null
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -0,0 +1,618 @@
+/*
+ * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver
+ *
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+#include <linux/mmc/mmc.h>
+#include <linux/slab.h>
+
+#include "sdhci-pltfm.h"
+
+#define CORE_HC_MODE 0x78
+#define HC_MODE_EN 0x1
+#define CORE_POWER 0x0
+#define CORE_SW_RST BIT(7)
+
+#define MAX_PHASES 16
+#define CORE_DLL_LOCK BIT(7)
+#define CORE_DLL_EN BIT(16)
+#define CORE_CDR_EN BIT(17)
+#define CORE_CK_OUT_EN BIT(18)
+#define CORE_CDR_EXT_EN BIT(19)
+#define CORE_DLL_PDN BIT(29)
+#define CORE_DLL_RST BIT(30)
+#define CORE_DLL_CONFIG 0x100
+#define CORE_DLL_STATUS 0x108
+
+#define CORE_VENDOR_SPEC 0x10c
+#define CORE_CLK_PWRSAVE BIT(1)
+
+#define CDR_SELEXT_SHIFT 20
+#define CDR_SELEXT_MASK (0xf << CDR_SELEXT_SHIFT)
+#define CMUX_SHIFT_PHASE_SHIFT 24
+#define CMUX_SHIFT_PHASE_MASK (7 << CMUX_SHIFT_PHASE_SHIFT)
+
+static const u32 tuning_block_64[] = {
+ 0x00ff0fff, 0xccc3ccff, 0xffcc3cc3, 0xeffefffe,
+ 0xddffdfff, 0xfbfffbff, 0xff7fffbf, 0xefbdf777,
+ 0xf0fff0ff, 0x3cccfc0f, 0xcfcc33cc, 0xeeffefff,
+ 0xfdfffdff, 0xffbfffdf, 0xfff7ffbb, 0xde7b7ff7
+};
+
+static const u32 tuning_block_128[] = {
+ 0xff00ffff, 0x0000ffff, 0xccccffff, 0xcccc33cc,
+ 0xcc3333cc, 0xffffcccc, 0xffffeeff, 0xffeeeeff,
+ 0xffddffff, 0xddddffff, 0xbbffffff, 0xbbffffff,
+ 0xffffffbb, 0xffffff77, 0x77ff7777, 0xffeeddbb,
+ 0x00ffffff, 0x00ffffff, 0xccffff00, 0xcc33cccc,
+ 0x3333cccc, 0xffcccccc, 0xffeeffff, 0xeeeeffff,
+ 0xddffffff, 0xddffffff, 0xffffffdd, 0xffffffbb,
+ 0xffffbbbb, 0xffff77ff, 0xff7777ff, 0xeeddbb77
+};
+
+struct sdhci_msm_host {
+ struct platform_device *pdev;
+ void __iomem *core_mem; /* MSM SDCC mapped address */
+ struct clk *clk; /* main SD/MMC bus clock */
+ struct clk *pclk; /* SDHC peripheral bus clock */
+ struct clk *bus_clk; /* SDHC bus voter clock */
+ struct mmc_host *mmc;
+ struct sdhci_pltfm_data sdhci_msm_pdata;
+};
+
+/* Platform specific tuning */
+static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll)
+{
+ u32 wait_cnt = 50;
+ u8 ck_out_en;
+ struct mmc_host *mmc = host->mmc;
+
+ /* Poll for CK_OUT_EN bit. max. poll time = 50us */
+ ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+ CORE_CK_OUT_EN);
+
+ while (ck_out_en != poll) {
+ if (--wait_cnt == 0) {
+ dev_err(mmc_dev(mmc), "%s: CK_OUT_EN bit is not %d\n",
+ mmc_hostname(mmc), poll);
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+
+ ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+ CORE_CK_OUT_EN);
+ }
+
+ return 0;
+}
+
+static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
+{
+ int rc;
+ static const u8 grey_coded_phase_table[] = {
+ 0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4,
+ 0xc, 0xd, 0xf, 0xe, 0xa, 0xb, 0x9, 0x8
+ };
+ unsigned long flags;
+ u32 config;
+ struct mmc_host *mmc = host->mmc;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN);
+ config |= (CORE_CDR_EXT_EN | CORE_DLL_EN);
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */
+ rc = msm_dll_poll_ck_out_en(host, 0);
+ if (rc)
+ goto err_out;
+
+ /*
+ * Write the selected DLL clock output phase (0 ... 15)
+ * to CDR_SELEXT bit field of DLL_CONFIG register.
+ */
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~CDR_SELEXT_MASK;
+ config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */
+ rc = msm_dll_poll_ck_out_en(host, 1);
+ if (rc)
+ goto err_out;
+
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config |= CORE_CDR_EN;
+ config &= ~CORE_CDR_EXT_EN;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+ goto out;
+
+err_out:
+ dev_err(mmc_dev(mmc), "%s: Failed to set DLL phase: %d\n",
+ mmc_hostname(mmc), phase);
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+ return rc;
+}
+
+/*
+ * Find out the greatest range of consecuitive selected
+ * DLL clock output phases that can be used as sampling
+ * setting for SD3.0 UHS-I card read operation (in SDR104
+ * timing mode) or for eMMC4.5 card read operation (in HS200
+ * timing mode).
+ * Select the 3/4 of the range and configure the DLL with the
+ * selected DLL clock output phase.
+ */
+
+static int msm_find_most_appropriate_phase(struct sdhci_host *host,
+ u8 *phase_table, u8 total_phases)
+{
+ int ret;
+ u8 ranges[MAX_PHASES][MAX_PHASES] = { {0}, {0} };
+ u8 phases_per_row[MAX_PHASES] = { 0 };
+ int row_index = 0, col_index = 0, selected_row_index = 0, curr_max = 0;
+ int i, cnt, phase_0_raw_index = 0, phase_15_raw_index = 0;
+ bool phase_0_found = false, phase_15_found = false;
+ struct mmc_host *mmc = host->mmc;
+
+ if (!total_phases || (total_phases > MAX_PHASES)) {
+ dev_err(mmc_dev(mmc), "%s: Invalid argument: total_phases=%d\n",
+ mmc_hostname(mmc), total_phases);
+ return -EINVAL;
+ }
+
+ for (cnt = 0; cnt < total_phases; cnt++) {
+ ranges[row_index][col_index] = phase_table[cnt];
+ phases_per_row[row_index] += 1;
+ col_index++;
+
+ if ((cnt + 1) == total_phases) {
+ continue;
+ /* check if next phase in phase_table is consecutive or not */
+ } else if ((phase_table[cnt] + 1) != phase_table[cnt + 1]) {
+ row_index++;
+ col_index = 0;
+ }
+ }
+
+ if (row_index >= MAX_PHASES)
+ return -EINVAL;
+
+ /* Check if phase-0 is present in first valid window? */
+ if (!ranges[0][0]) {
+ phase_0_found = true;
+ phase_0_raw_index = 0;
+ /* Check if cycle exist between 2 valid windows */
+ for (cnt = 1; cnt <= row_index; cnt++) {
+ if (phases_per_row[cnt]) {
+ for (i = 0; i < phases_per_row[cnt]; i++) {
+ if (ranges[cnt][i] == 15) {
+ phase_15_found = true;
+ phase_15_raw_index = cnt;
+ break;
+ }
+ }
+ }
+ }
+ }
+
+ /* If 2 valid windows form cycle then merge them as single window */
+ if (phase_0_found && phase_15_found) {
+ /* number of phases in raw where phase 0 is present */
+ u8 phases_0 = phases_per_row[phase_0_raw_index];
+ /* number of phases in raw where phase 15 is present */
+ u8 phases_15 = phases_per_row[phase_15_raw_index];
+
+ if (phases_0 + phases_15 >= MAX_PHASES)
+ /*
+ * If there are more than 1 phase windows then total
+ * number of phases in both the windows should not be
+ * more than or equal to MAX_PHASES.
+ */
+ return -EINVAL;
+
+ /* Merge 2 cyclic windows */
+ i = phases_15;
+ for (cnt = 0; cnt < phases_0; cnt++) {
+ ranges[phase_15_raw_index][i] =
+ ranges[phase_0_raw_index][cnt];
+ if (++i >= MAX_PHASES)
+ break;
+ }
+
+ phases_per_row[phase_0_raw_index] = 0;
+ phases_per_row[phase_15_raw_index] = phases_15 + phases_0;
+ }
+
+ for (cnt = 0; cnt <= row_index; cnt++) {
+ if (phases_per_row[cnt] > curr_max) {
+ curr_max = phases_per_row[cnt];
+ selected_row_index = cnt;
+ }
+ }
+
+ i = (curr_max * 3) / 4;
+ if (i)
+ i--;
+
+ ret = ranges[selected_row_index][i];
+
+ if (ret >= MAX_PHASES) {
+ ret = -EINVAL;
+ dev_err(mmc_dev(mmc), "%s: Invalid phase selected=%d\n",
+ mmc_hostname(mmc), ret);
+ }
+
+ return ret;
+}
+
+static inline void msm_cm_dll_set_freq(struct sdhci_host *host)
+{
+ u32 mclk_freq = 0, config;
+
+ /* Program the MCLK value to MCLK_FREQ bit field */
+ if (host->clock <= 112000000)
+ mclk_freq = 0;
+ else if (host->clock <= 125000000)
+ mclk_freq = 1;
+ else if (host->clock <= 137000000)
+ mclk_freq = 2;
+ else if (host->clock <= 150000000)
+ mclk_freq = 3;
+ else if (host->clock <= 162000000)
+ mclk_freq = 4;
+ else if (host->clock <= 175000000)
+ mclk_freq = 5;
+ else if (host->clock <= 187000000)
+ mclk_freq = 6;
+ else if (host->clock <= 200000000)
+ mclk_freq = 7;
+
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~CMUX_SHIFT_PHASE_MASK;
+ config |= mclk_freq << CMUX_SHIFT_PHASE_SHIFT;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+}
+
+/* Initialize the DLL (Programmable Delay Line) */
+static int msm_init_cm_dll(struct sdhci_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ int wait_cnt = 50;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /*
+ * Make sure that clock is always enabled when DLL
+ * tuning is in progress. Keeping PWRSAVE ON may
+ * turn off the clock.
+ */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC)
+ & ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC);
+
+ /* Write 1 to DLL_RST bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Write 1 to DLL_PDN bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+ msm_cm_dll_set_freq(host);
+
+ /* Write 0 to DLL_RST bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ & ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Write 0 to DLL_PDN bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ & ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set DLL_EN bit to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set CK_OUT_EN bit to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */
+ while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) &
+ CORE_DLL_LOCK)) {
+ /* max. wait for 50us sec for LOCK bit to be set */
+ if (--wait_cnt == 0) {
+ dev_err(mmc_dev(mmc), "%s: DLL failed to LOCK\n",
+ mmc_hostname(mmc));
+ spin_unlock_irqrestore(&host->lock, flags);
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ return 0;
+}
+
+static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+ int tuning_seq_cnt = 3;
+ u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
+ const u32 *tuning_block_pattern = tuning_block_64;
+ int size = sizeof(tuning_block_64); /* Pattern size in bytes */
+ int rc;
+ struct mmc_host *mmc = host->mmc;
+ struct mmc_ios ios = host->mmc->ios;
+
+ /*
+ * Tuning is required for SDR104, HS200 and HS400 cards and
+ * if clock frequency is greater than 100MHz in these modes.
+ */
+ if (host->clock <= 100 * 1000 * 1000 ||
+ !((ios.timing == MMC_TIMING_MMC_HS200) ||
+ (ios.timing == MMC_TIMING_UHS_SDR104)))
+ return 0;
+
+ if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
+ (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
+ tuning_block_pattern = tuning_block_128;
+ size = sizeof(tuning_block_128);
+ }
+
+ data_buf = kmalloc(size, GFP_KERNEL);
+ if (!data_buf)
+ return -ENOMEM;
+
+retry:
+ /* First of all reset the tuning block */
+ rc = msm_init_cm_dll(host);
+ if (rc)
+ goto out;
+
+ phase = 0;
+ do {
+ struct mmc_command cmd = { 0 };
+ struct mmc_data data = { 0 };
+ struct mmc_request mrq = {
+ .cmd = &cmd,
+ .data = &data
+ };
+ struct scatterlist sg;
+
+ /* Set the phase in delay line hw block */
+ rc = msm_config_cm_dll_phase(host, phase);
+ if (rc)
+ goto out;
+
+ cmd.opcode = opcode;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = size;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.timeout_ns = NSEC_PER_SEC; /* 1 second */
+
+ data.sg = &sg;
+ data.sg_len = 1;
+ sg_init_one(&sg, data_buf, size);
+ memset(data_buf, 0, size);
+ mmc_wait_for_req(mmc, &mrq);
+
+ if (!cmd.error && !data.error &&
+ !memcmp(data_buf, tuning_block_pattern, size)) {
+ /* Tuning is successful at this tuning point */
+ tuned_phases[tuned_phase_cnt++] = phase;
+ dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
+ mmc_hostname(mmc), phase);
+ }
+ } while (++phase < ARRAY_SIZE(tuned_phases));
+
+ if (tuned_phase_cnt) {
+ rc = msm_find_most_appropriate_phase(host, tuned_phases,
+ tuned_phase_cnt);
+ if (rc < 0)
+ goto out;
+ else
+ phase = rc;
+
+ /*
+ * Finally set the selected phase in delay
+ * line hw block.
+ */
+ rc = msm_config_cm_dll_phase(host, phase);
+ if (rc)
+ goto out;
+ dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
+ mmc_hostname(mmc), phase);
+ } else {
+ if (--tuning_seq_cnt)
+ goto retry;
+ /* Tuning failed */
+ dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n",
+ mmc_hostname(mmc));
+ rc = -EIO;
+ }
+
+out:
+ kfree(data_buf);
+ return rc;
+}
+
+static const struct of_device_id sdhci_msm_dt_match[] = {
+ { .compatible = "qcom,sdhci-msm-v4" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
+
+static struct sdhci_ops sdhci_msm_ops = {
+ .platform_execute_tuning = sdhci_msm_execute_tuning,
+};
+
+static int sdhci_msm_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_msm_host *msm_host;
+ struct resource *core_memres;
+ int ret;
+ u16 host_version;
+
+ msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
+ if (!msm_host)
+ return -ENOMEM;
+
+ msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops;
+ host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0);
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+ pltfm_host->priv = msm_host;
+ msm_host->mmc = host->mmc;
+ msm_host->pdev = pdev;
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto pltfm_free;
+
+ sdhci_get_of_property(pdev);
+
+ /* Setup SDCC bus voter clock. */
+ msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (!IS_ERR(msm_host->bus_clk)) {
+ /* Vote for max. clk rate for max. performance */
+ ret = clk_set_rate(msm_host->bus_clk, INT_MAX);
+ if (ret)
+ goto pltfm_free;
+ ret = clk_prepare_enable(msm_host->bus_clk);
+ if (ret)
+ goto pltfm_free;
+ }
+
+ /* Setup main peripheral bus clock */
+ msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(msm_host->pclk)) {
+ ret = PTR_ERR(msm_host->pclk);
+ dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret);
+ goto bus_clk_disable;
+ }
+
+ ret = clk_prepare_enable(msm_host->pclk);
+ if (ret)
+ goto bus_clk_disable;
+
+ /* Setup SDC MMC clock */
+ msm_host->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(msm_host->clk)) {
+ ret = PTR_ERR(msm_host->clk);
+ dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret);
+ goto pclk_disable;
+ }
+
+ ret = clk_prepare_enable(msm_host->clk);
+ if (ret)
+ goto pclk_disable;
+
+ core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres);
+
+ if (IS_ERR(msm_host->core_mem)) {
+ dev_err(&pdev->dev, "Failed to remap registers\n");
+ ret = PTR_ERR(msm_host->core_mem);
+ goto clk_disable;
+ }
+
+ /* Reset the core and Enable SDHC mode */
+ writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
+ CORE_SW_RST, msm_host->core_mem + CORE_POWER);
+
+ /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
+ usleep_range(1000, 5000);
+ if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) {
+ dev_err(&pdev->dev, "Stuck in reset\n");
+ ret = -ETIMEDOUT;
+ goto clk_disable;
+ }
+
+ /* Set HC_MODE_EN bit in HC_MODE register */
+ writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
+
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE;
+
+ host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
+ dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n",
+ host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>
+ SDHCI_VENDOR_VER_SHIFT));
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto clk_disable;
+
+ return 0;
+
+clk_disable:
+ clk_disable_unprepare(msm_host->clk);
+pclk_disable:
+ clk_disable_unprepare(msm_host->pclk);
+bus_clk_disable:
+ if (!IS_ERR(msm_host->bus_clk))
+ clk_disable_unprepare(msm_host->bus_clk);
+pltfm_free:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static int sdhci_msm_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
+ int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) ==
+ 0xffffffff);
+
+ sdhci_remove_host(host, dead);
+ sdhci_pltfm_free(pdev);
+ clk_disable_unprepare(msm_host->clk);
+ clk_disable_unprepare(msm_host->pclk);
+ if (!IS_ERR(msm_host->bus_clk))
+ clk_disable_unprepare(msm_host->bus_clk);
+ return 0;
+}
+
+static struct platform_driver sdhci_msm_driver = {
+ .probe = sdhci_msm_probe,
+ .remove = sdhci_msm_remove,
+ .driver = {
+ .name = "sdhci_msm",
+ .owner = THIS_MODULE,
+ .of_match_table = sdhci_msm_dt_match,
+ },
+};
+
+module_platform_driver(sdhci_msm_driver);
+
+MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL v2");