summaryrefslogtreecommitdiffstats
path: root/drivers/misc/mei/hw-txe.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/mei/hw-txe.c')
-rw-r--r--drivers/misc/mei/hw-txe.c53
1 files changed, 25 insertions, 28 deletions
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
index fc1a51f818d0..acc475eec150 100644
--- a/drivers/misc/mei/hw-txe.c
+++ b/drivers/misc/mei/hw-txe.c
@@ -155,7 +155,7 @@ static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req)
struct mei_txe_hw *hw = to_txe_hw(dev);
bool do_req = hw->aliveness != req;
- dev_dbg(&dev->pdev->dev, "Aliveness current=%d request=%d\n",
+ dev_dbg(dev->dev, "Aliveness current=%d request=%d\n",
hw->aliveness, req);
if (do_req) {
dev->pg_event = MEI_PG_EVENT_WAIT;
@@ -216,7 +216,7 @@ static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected)
hw->aliveness = mei_txe_aliveness_get(dev);
if (hw->aliveness == expected) {
dev->pg_event = MEI_PG_EVENT_IDLE;
- dev_dbg(&dev->pdev->dev,
+ dev_dbg(dev->dev,
"aliveness settled after %d msecs\n", t);
return t;
}
@@ -227,7 +227,7 @@ static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected)
} while (t < SEC_ALIVENESS_WAIT_TIMEOUT);
dev->pg_event = MEI_PG_EVENT_IDLE;
- dev_err(&dev->pdev->dev, "aliveness timed out\n");
+ dev_err(dev->dev, "aliveness timed out\n");
return -ETIME;
}
@@ -261,10 +261,10 @@ static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected)
ret = hw->aliveness == expected ? 0 : -ETIME;
if (ret)
- dev_warn(&dev->pdev->dev, "aliveness timed out = %ld aliveness = %d event = %d\n",
+ dev_warn(dev->dev, "aliveness timed out = %ld aliveness = %d event = %d\n",
err, hw->aliveness, dev->pg_event);
else
- dev_dbg(&dev->pdev->dev, "aliveness settled after = %d msec aliveness = %d event = %d\n",
+ dev_dbg(dev->dev, "aliveness settled after = %d msec aliveness = %d event = %d\n",
jiffies_to_msecs(timeout - err),
hw->aliveness, dev->pg_event);
@@ -425,7 +425,7 @@ static bool mei_txe_pending_interrupts(struct mei_device *dev)
TXE_INTR_OUT_DB));
if (ret) {
- dev_dbg(&dev->pdev->dev,
+ dev_dbg(dev->dev,
"Pending Interrupts InReady=%01d Readiness=%01d, Aliveness=%01d, OutDoor=%01d\n",
!!(hw->intr_cause & TXE_INTR_IN_READY),
!!(hw->intr_cause & TXE_INTR_READINESS),
@@ -565,7 +565,7 @@ static int mei_txe_readiness_wait(struct mei_device *dev)
msecs_to_jiffies(SEC_RESET_WAIT_TIMEOUT));
mutex_lock(&dev->device_lock);
if (!dev->recvd_hw_ready) {
- dev_err(&dev->pdev->dev, "wait for readiness failed\n");
+ dev_err(dev->dev, "wait for readiness failed\n");
return -ETIME;
}
@@ -592,7 +592,7 @@ static void mei_txe_hw_config(struct mei_device *dev)
hw->aliveness = mei_txe_aliveness_get(dev);
hw->readiness = mei_txe_readiness_get(dev);
- dev_dbg(&dev->pdev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n",
+ dev_dbg(dev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n",
hw->aliveness, hw->readiness);
}
@@ -622,7 +622,7 @@ static int mei_txe_write(struct mei_device *dev,
length = header->length;
- dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));
+ dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));
dw_cnt = mei_data2slots(length);
if (dw_cnt > slots)
@@ -638,7 +638,7 @@ static int mei_txe_write(struct mei_device *dev,
struct mei_fw_status fw_status;
mei_fw_status(dev, &fw_status);
- dev_err(&dev->pdev->dev, "Input is not ready " FW_STS_FMT "\n",
+ dev_err(dev->dev, "Input is not ready " FW_STS_FMT "\n",
FW_STS_PRM(fw_status));
return -EAGAIN;
}
@@ -740,14 +740,13 @@ static int mei_txe_read(struct mei_device *dev,
reg_buf = (u32 *)buf;
rem = len & 0x3;
- dev_dbg(&dev->pdev->dev,
- "buffer-length = %lu buf[0]0x%08X\n",
+ dev_dbg(dev->dev, "buffer-length = %lu buf[0]0x%08X\n",
len, mei_txe_out_data_read(dev, 0));
for (i = 0; i < len / 4; i++) {
/* skip header: index starts from 1 */
reg = mei_txe_out_data_read(dev, i + 1);
- dev_dbg(&dev->pdev->dev, "buf[%d] = 0x%08X\n", i, reg);
+ dev_dbg(dev->dev, "buf[%d] = 0x%08X\n", i, reg);
*reg_buf++ = reg;
}
@@ -792,8 +791,7 @@ static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable)
*/
if (aliveness_req != hw->aliveness)
if (mei_txe_aliveness_poll(dev, aliveness_req) < 0) {
- dev_err(&dev->pdev->dev,
- "wait for aliveness settle failed ... bailing out\n");
+ dev_err(dev->dev, "wait for aliveness settle failed ... bailing out\n");
return -EIO;
}
@@ -803,8 +801,7 @@ static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable)
if (aliveness_req) {
mei_txe_aliveness_set(dev, 0);
if (mei_txe_aliveness_poll(dev, 0) < 0) {
- dev_err(&dev->pdev->dev,
- "wait for aliveness failed ... bailing out\n");
+ dev_err(dev->dev, "wait for aliveness failed ... bailing out\n");
return -EIO;
}
}
@@ -836,7 +833,7 @@ static int mei_txe_hw_start(struct mei_device *dev)
ret = mei_txe_readiness_wait(dev);
if (ret < 0) {
- dev_err(&dev->pdev->dev, "wating for readiness failed\n");
+ dev_err(dev->dev, "wating for readiness failed\n");
return ret;
}
@@ -852,7 +849,7 @@ static int mei_txe_hw_start(struct mei_device *dev)
ret = mei_txe_aliveness_set_sync(dev, 1);
if (ret < 0) {
- dev_err(&dev->pdev->dev, "wait for aliveness failed ... bailing out\n");
+ dev_err(dev->dev, "wait for aliveness failed ... bailing out\n");
return ret;
}
@@ -962,7 +959,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
s32 slots;
int rets = 0;
- dev_dbg(&dev->pdev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n",
+ dev_dbg(dev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n",
mei_txe_br_reg_read(hw, HHISR_REG),
mei_txe_br_reg_read(hw, HISR_REG),
mei_txe_sec_reg_read_silent(hw, SEC_IPC_HOST_INT_STATUS_REG));
@@ -986,17 +983,17 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
* or TXE driver resetting the HECI interface.
*/
if (test_and_clear_bit(TXE_INTR_READINESS_BIT, &hw->intr_cause)) {
- dev_dbg(&dev->pdev->dev, "Readiness Interrupt was received...\n");
+ dev_dbg(dev->dev, "Readiness Interrupt was received...\n");
/* Check if SeC is going through reset */
if (mei_txe_readiness_is_sec_rdy(hw->readiness)) {
- dev_dbg(&dev->pdev->dev, "we need to start the dev.\n");
+ dev_dbg(dev->dev, "we need to start the dev.\n");
dev->recvd_hw_ready = true;
} else {
dev->recvd_hw_ready = false;
if (dev->dev_state != MEI_DEV_RESETTING) {
- dev_warn(&dev->pdev->dev, "FW not ready: resetting.\n");
+ dev_warn(dev->dev, "FW not ready: resetting.\n");
schedule_work(&dev->reset_work);
goto end;
@@ -1013,7 +1010,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
if (test_and_clear_bit(TXE_INTR_ALIVENESS_BIT, &hw->intr_cause)) {
/* Clear the interrupt cause */
- dev_dbg(&dev->pdev->dev,
+ dev_dbg(dev->dev,
"Aliveness Interrupt: Status: %d\n", hw->aliveness);
dev->pg_event = MEI_PG_EVENT_RECEIVED;
if (waitqueue_active(&hw->wait_aliveness_resp))
@@ -1029,7 +1026,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
/* Read from TXE */
rets = mei_irq_read_handler(dev, &complete_list, &slots);
if (rets && dev->dev_state != MEI_DEV_RESETTING) {
- dev_err(&dev->pdev->dev,
+ dev_err(dev->dev,
"mei_irq_read_handler ret = %d.\n", rets);
schedule_work(&dev->reset_work);
@@ -1047,7 +1044,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
rets = mei_irq_write_handler(dev, &complete_list);
if (rets && rets != -EMSGSIZE)
- dev_err(&dev->pdev->dev, "mei_irq_write_handler ret = %d.\n",
+ dev_err(dev->dev, "mei_irq_write_handler ret = %d.\n",
rets);
dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
}
@@ -1055,7 +1052,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
mei_irq_compl_handler(dev, &complete_list);
end:
- dev_dbg(&dev->pdev->dev, "interrupt thread end ret = %d\n", rets);
+ dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
mutex_unlock(&dev->device_lock);
@@ -1171,7 +1168,7 @@ int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range)
mei_txe_br_reg_write(hw, SATT2_SAP_SIZE_REG, range);
mei_txe_br_reg_write(hw, SATT2_BRG_BA_LSB_REG, lo32);
mei_txe_br_reg_write(hw, SATT2_CTRL_REG, ctrl);
- dev_dbg(&dev->pdev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n",
+ dev_dbg(dev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n",
range, lo32, ctrl);
return 0;
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-25 01:38:41 +0000