summaryrefslogtreecommitdiffstats
path: root/drivers/misc/cxl/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/cxl/pci.c')
-rw-r--r--drivers/misc/cxl/pci.c392
1 files changed, 40 insertions, 352 deletions
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 429d6de1dde7..b66d832d3233 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -55,8 +55,6 @@
pci_read_config_byte(dev, vsec + 0xa, dest)
#define CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val) \
pci_write_config_byte(dev, vsec + 0xa, val)
-#define CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, vsec, val) \
- pci_bus_write_config_byte(bus, devfn, vsec + 0xa, val)
#define CXL_VSEC_PROTOCOL_MASK 0xe0
#define CXL_VSEC_PROTOCOL_1024TB 0x80
#define CXL_VSEC_PROTOCOL_512TB 0x40
@@ -465,23 +463,21 @@ int cxl_get_xsl9_dsnctl(struct pci_dev *dev, u64 capp_unit_id, u64 *reg)
/* nMMU_ID Defaults to: b’000001001’*/
xsl_dsnctl |= ((u64)0x09 << (63-28));
- if (!(cxl_is_power9_dd1())) {
- /*
- * Used to identify CAPI packets which should be sorted into
- * the Non-Blocking queues by the PHB. This field should match
- * the PHB PBL_NBW_CMPM register
- * nbwind=0x03, bits [57:58], must include capi indicator.
- * Not supported on P9 DD1.
- */
- xsl_dsnctl |= (nbwind << (63-55));
+ /*
+ * Used to identify CAPI packets which should be sorted into
+ * the Non-Blocking queues by the PHB. This field should match
+ * the PHB PBL_NBW_CMPM register
+ * nbwind=0x03, bits [57:58], must include capi indicator.
+ * Not supported on P9 DD1.
+ */
+ xsl_dsnctl |= (nbwind << (63-55));
- /*
- * Upper 16b address bits of ASB_Notify messages sent to the
- * system. Need to match the PHB’s ASN Compare/Mask Register.
- * Not supported on P9 DD1.
- */
- xsl_dsnctl |= asnind;
- }
+ /*
+ * Upper 16b address bits of ASB_Notify messages sent to the
+ * system. Need to match the PHB’s ASN Compare/Mask Register.
+ * Not supported on P9 DD1.
+ */
+ xsl_dsnctl |= asnind;
*reg = xsl_dsnctl;
return 0;
@@ -539,15 +535,8 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter,
/* Snoop machines */
cxl_p1_write(adapter, CXL_PSL9_APCDEDALLOC, 0x800F000200000000ULL);
- if (cxl_is_power9_dd1()) {
- /* Disabling deadlock counter CAR */
- cxl_p1_write(adapter, CXL_PSL9_GP_CT, 0x0020000000000001ULL);
- /* Enable NORST */
- cxl_p1_write(adapter, CXL_PSL9_DEBUG, 0x8000000000000000ULL);
- } else {
- /* Enable NORST and DD2 features */
- cxl_p1_write(adapter, CXL_PSL9_DEBUG, 0xC000000000000000ULL);
- }
+ /* Enable NORST and DD2 features */
+ cxl_p1_write(adapter, CXL_PSL9_DEBUG, 0xC000000000000000ULL);
/*
* Check if PSL has data-cache. We need to flush adapter datacache
@@ -595,27 +584,7 @@ static int init_implementation_adapter_regs_psl8(struct cxl *adapter, struct pci
return 0;
}
-static int init_implementation_adapter_regs_xsl(struct cxl *adapter, struct pci_dev *dev)
-{
- u64 xsl_dsnctl;
- u64 chipid;
- u32 phb_index;
- u64 capp_unit_id;
- int rc;
-
- rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
- if (rc)
- return rc;
-
- /* Tell XSL where to route data to */
- xsl_dsnctl = 0x0000600000000000ULL | (chipid << (63-5));
- xsl_dsnctl |= (capp_unit_id << (63-13));
- cxl_p1_write(adapter, CXL_XSL_DSNCTL, xsl_dsnctl);
-
- return 0;
-}
-
-/* PSL & XSL */
+/* PSL */
#define TBSYNC_CAL(n) (((u64)n & 0x7) << (63-3))
#define TBSYNC_CNT(n) (((u64)n & 0x7) << (63-6))
/* For the PSL this is a multiple for 0 < n <= 7: */
@@ -627,21 +596,6 @@ static void write_timebase_ctrl_psl8(struct cxl *adapter)
TBSYNC_CNT(2 * PSL_2048_250MHZ_CYCLES));
}
-/* XSL */
-#define TBSYNC_ENA (1ULL << 63)
-/* For the XSL this is 2**n * 2000 clocks for 0 < n <= 6: */
-#define XSL_2000_CLOCKS 1
-#define XSL_4000_CLOCKS 2
-#define XSL_8000_CLOCKS 3
-
-static void write_timebase_ctrl_xsl(struct cxl *adapter)
-{
- cxl_p1_write(adapter, CXL_XSL_TB_CTLSTAT,
- TBSYNC_ENA |
- TBSYNC_CAL(3) |
- TBSYNC_CNT(XSL_4000_CLOCKS));
-}
-
static u64 timebase_read_psl9(struct cxl *adapter)
{
return cxl_p1_read(adapter, CXL_PSL9_Timebase);
@@ -652,11 +606,6 @@ static u64 timebase_read_psl8(struct cxl *adapter)
return cxl_p1_read(adapter, CXL_PSL_Timebase);
}
-static u64 timebase_read_xsl(struct cxl *adapter)
-{
- return cxl_p1_read(adapter, CXL_XSL_Timebase);
-}
-
static void cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
{
struct device_node *np;
@@ -800,234 +749,36 @@ static int setup_cxl_bars(struct pci_dev *dev)
return 0;
}
-#ifdef CONFIG_CXL_BIMODAL
-
-struct cxl_switch_work {
- struct pci_dev *dev;
- struct work_struct work;
- int vsec;
- int mode;
-};
-
-static void switch_card_to_cxl(struct work_struct *work)
+/* pciex node: ibm,opal-m64-window = <0x3d058 0x0 0x3d058 0x0 0x8 0x0>; */
+static int switch_card_to_cxl(struct pci_dev *dev)
{
- struct cxl_switch_work *switch_work =
- container_of(work, struct cxl_switch_work, work);
- struct pci_dev *dev = switch_work->dev;
- struct pci_bus *bus = dev->bus;
- struct pci_controller *hose = pci_bus_to_host(bus);
- struct pci_dev *bridge;
- struct pnv_php_slot *php_slot;
- unsigned int devfn;
+ int vsec;
u8 val;
int rc;
- dev_info(&bus->dev, "cxl: Preparing for mode switch...\n");
- bridge = list_first_entry_or_null(&hose->bus->devices, struct pci_dev,
- bus_list);
- if (!bridge) {
- dev_WARN(&bus->dev, "cxl: Couldn't find root port!\n");
- goto err_dev_put;
- }
-
- php_slot = pnv_php_find_slot(pci_device_to_OF_node(bridge));
- if (!php_slot) {
- dev_err(&bus->dev, "cxl: Failed to find slot hotplug "
- "information. You may need to upgrade "
- "skiboot. Aborting.\n");
- goto err_dev_put;
- }
-
- rc = CXL_READ_VSEC_MODE_CONTROL(dev, switch_work->vsec, &val);
- if (rc) {
- dev_err(&bus->dev, "cxl: Failed to read CAPI mode control: %i\n", rc);
- goto err_dev_put;
- }
- devfn = dev->devfn;
-
- /* Release the reference obtained in cxl_check_and_switch_mode() */
- pci_dev_put(dev);
-
- dev_dbg(&bus->dev, "cxl: Removing PCI devices from kernel\n");
- pci_lock_rescan_remove();
- pci_hp_remove_devices(bridge->subordinate);
- pci_unlock_rescan_remove();
-
- /* Switch the CXL protocol on the card */
- if (switch_work->mode == CXL_BIMODE_CXL) {
- dev_info(&bus->dev, "cxl: Switching card to CXL mode\n");
- val &= ~CXL_VSEC_PROTOCOL_MASK;
- val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
- rc = pnv_cxl_enable_phb_kernel_api(hose, true);
- if (rc) {
- dev_err(&bus->dev, "cxl: Failed to enable kernel API"
- " on real PHB, aborting\n");
- goto err_free_work;
- }
- } else {
- dev_WARN(&bus->dev, "cxl: Switching card to PCI mode not supported!\n");
- goto err_free_work;
- }
-
- rc = CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, switch_work->vsec, val);
- if (rc) {
- dev_err(&bus->dev, "cxl: Failed to configure CXL protocol: %i\n", rc);
- goto err_free_work;
- }
+ dev_info(&dev->dev, "switch card to CXL\n");
- /*
- * The CAIA spec (v1.1, Section 10.6 Bi-modal Device Support) states
- * we must wait 100ms after this mode switch before touching PCIe config
- * space.
- */
- msleep(100);
-
- /*
- * Hot reset to cause the card to come back in cxl mode. A
- * OPAL_RESET_PCI_LINK would be sufficient, but currently lacks support
- * in skiboot, so we use a hot reset instead.
- *
- * We call pci_set_pcie_reset_state() on the bridge, as a CAPI card is
- * guaranteed to sit directly under the root port, and setting the reset
- * state on a device directly under the root port is equivalent to doing
- * it on the root port iself.
- */
- dev_info(&bus->dev, "cxl: Configuration write complete, resetting card\n");
- pci_set_pcie_reset_state(bridge, pcie_hot_reset);
- pci_set_pcie_reset_state(bridge, pcie_deassert_reset);
-
- dev_dbg(&bus->dev, "cxl: Offlining slot\n");
- rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_OFFLINE);
- if (rc) {
- dev_err(&bus->dev, "cxl: OPAL offlining call failed: %i\n", rc);
- goto err_free_work;
- }
-
- dev_dbg(&bus->dev, "cxl: Onlining and probing slot\n");
- rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_ONLINE);
- if (rc) {
- dev_err(&bus->dev, "cxl: OPAL onlining call failed: %i\n", rc);
- goto err_free_work;
- }
-
- pci_lock_rescan_remove();
- pci_hp_add_devices(bridge->subordinate);
- pci_unlock_rescan_remove();
-
- dev_info(&bus->dev, "cxl: CAPI mode switch completed\n");
- kfree(switch_work);
- return;
-
-err_dev_put:
- /* Release the reference obtained in cxl_check_and_switch_mode() */
- pci_dev_put(dev);
-err_free_work:
- kfree(switch_work);
-}
-
-int cxl_check_and_switch_mode(struct pci_dev *dev, int mode, int vsec)
-{
- struct cxl_switch_work *work;
- u8 val;
- int rc;
-
- if (!cpu_has_feature(CPU_FTR_HVMODE))
+ if (!(vsec = find_cxl_vsec(dev))) {
+ dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
return -ENODEV;
-
- if (!vsec) {
- vsec = find_cxl_vsec(dev);
- if (!vsec) {
- dev_info(&dev->dev, "CXL VSEC not found\n");
- return -ENODEV;
- }
}
- rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
- if (rc) {
- dev_err(&dev->dev, "Failed to read current mode control: %i", rc);
+ if ((rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val))) {
+ dev_err(&dev->dev, "failed to read current mode control: %i", rc);
return rc;
}
-
- if (mode == CXL_BIMODE_PCI) {
- if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
- dev_info(&dev->dev, "Card is already in PCI mode\n");
- return 0;
- }
- /*
- * TODO: Before it's safe to switch the card back to PCI mode
- * we need to disable the CAPP and make sure any cachelines the
- * card holds have been flushed out. Needs skiboot support.
- */
- dev_WARN(&dev->dev, "CXL mode switch to PCI unsupported!\n");
- return -EIO;
- }
-
- if (val & CXL_VSEC_PROTOCOL_ENABLE) {
- dev_info(&dev->dev, "Card is already in CXL mode\n");
- return 0;
+ val &= ~CXL_VSEC_PROTOCOL_MASK;
+ val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
+ if ((rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val))) {
+ dev_err(&dev->dev, "failed to enable CXL protocol: %i", rc);
+ return rc;
}
-
- dev_info(&dev->dev, "Card is in PCI mode, scheduling kernel thread "
- "to switch to CXL mode\n");
-
- work = kmalloc(sizeof(struct cxl_switch_work), GFP_KERNEL);
- if (!work)
- return -ENOMEM;
-
- pci_dev_get(dev);
- work->dev = dev;
- work->vsec = vsec;
- work->mode = mode;
- INIT_WORK(&work->work, switch_card_to_cxl);
-
- schedule_work(&work->work);
-
/*
- * We return a failure now to abort the driver init. Once the
- * link has been cycled and the card is in cxl mode we will
- * come back (possibly using the generic cxl driver), but
- * return success as the card should then be in cxl mode.
- *
- * TODO: What if the card comes back in PCI mode even after
- * the switch? Don't want to spin endlessly.
+ * The CAIA spec (v0.12 11.6 Bi-modal Device Support) states
+ * we must wait 100ms after this mode switch before touching
+ * PCIe config space.
*/
- return -EBUSY;
-}
-EXPORT_SYMBOL_GPL(cxl_check_and_switch_mode);
-
-#endif /* CONFIG_CXL_BIMODAL */
-
-static int setup_cxl_protocol_area(struct pci_dev *dev)
-{
- u8 val;
- int rc;
- int vsec = find_cxl_vsec(dev);
-
- if (!vsec) {
- dev_info(&dev->dev, "CXL VSEC not found\n");
- return -ENODEV;
- }
-
- rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
- if (rc) {
- dev_err(&dev->dev, "Failed to read current mode control: %i\n", rc);
- return rc;
- }
-
- if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
- dev_err(&dev->dev, "Card not in CAPI mode!\n");
- return -EIO;
- }
-
- if ((val & CXL_VSEC_PROTOCOL_MASK) != CXL_VSEC_PROTOCOL_256TB) {
- val &= ~CXL_VSEC_PROTOCOL_MASK;
- val |= CXL_VSEC_PROTOCOL_256TB;
- rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val);
- if (rc) {
- dev_err(&dev->dev, "Failed to set CXL protocol area: %i\n", rc);
- return rc;
- }
- }
+ msleep(100);
return 0;
}
@@ -1724,7 +1475,7 @@ static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
if ((rc = setup_cxl_bars(dev)))
return rc;
- if ((rc = setup_cxl_protocol_area(dev)))
+ if ((rc = switch_card_to_cxl(dev)))
return rc;
if ((rc = cxl_update_image_control(adapter)))
@@ -1871,37 +1622,14 @@ static const struct cxl_service_layer_ops psl8_ops = {
.needs_reset_before_disable = true,
};
-static const struct cxl_service_layer_ops xsl_ops = {
- .adapter_regs_init = init_implementation_adapter_regs_xsl,
- .invalidate_all = cxl_invalidate_all_psl8,
- .sanitise_afu_regs = sanitise_afu_regs_psl8,
- .handle_interrupt = cxl_irq_psl8,
- .fail_irq = cxl_fail_irq_psl,
- .activate_dedicated_process = cxl_activate_dedicated_process_psl8,
- .attach_afu_directed = cxl_attach_afu_directed_psl8,
- .attach_dedicated_process = cxl_attach_dedicated_process_psl8,
- .update_dedicated_ivtes = cxl_update_dedicated_ivtes_psl8,
- .debugfs_add_adapter_regs = cxl_debugfs_add_adapter_regs_xsl,
- .write_timebase_ctrl = write_timebase_ctrl_xsl,
- .timebase_read = timebase_read_xsl,
- .capi_mode = OPAL_PHB_CAPI_MODE_DMA,
-};
-
static void set_sl_ops(struct cxl *adapter, struct pci_dev *dev)
{
- if (dev->vendor == PCI_VENDOR_ID_MELLANOX && dev->device == 0x1013) {
- /* Mellanox CX-4 */
- dev_info(&dev->dev, "Device uses an XSL\n");
- adapter->native->sl_ops = &xsl_ops;
- adapter->min_pe = 1; /* Workaround for CX-4 hardware bug */
+ if (cxl_is_power8()) {
+ dev_info(&dev->dev, "Device uses a PSL8\n");
+ adapter->native->sl_ops = &psl8_ops;
} else {
- if (cxl_is_power8()) {
- dev_info(&dev->dev, "Device uses a PSL8\n");
- adapter->native->sl_ops = &psl8_ops;
- } else {
- dev_info(&dev->dev, "Device uses a PSL9\n");
- adapter->native->sl_ops = &psl9_ops;
- }
+ dev_info(&dev->dev, "Device uses a PSL9\n");
+ adapter->native->sl_ops = &psl9_ops;
}
}
@@ -2008,43 +1736,6 @@ int cxl_slot_is_switched(struct pci_dev *dev)
return (depth > CXL_MAX_PCIEX_PARENT);
}
-bool cxl_slot_is_supported(struct pci_dev *dev, int flags)
-{
- if (!cpu_has_feature(CPU_FTR_HVMODE))
- return false;
-
- if ((flags & CXL_SLOT_FLAG_DMA) && (!pvr_version_is(PVR_POWER8NVL))) {
- /*
- * CAPP DMA mode is technically supported on regular P8, but
- * will EEH if the card attempts to access memory < 4GB, which
- * we cannot realistically avoid. We might be able to work
- * around the issue, but until then return unsupported:
- */
- return false;
- }
-
- if (cxl_slot_is_switched(dev))
- return false;
-
- /*
- * XXX: This gets a little tricky on regular P8 (not POWER8NVL) since
- * the CAPP can be connected to PHB 0, 1 or 2 on a first come first
- * served basis, which is racy to check from here. If we need to
- * support this in future we might need to consider having this
- * function effectively reserve it ahead of time.
- *
- * Currently, the only user of this API is the Mellanox CX4, which is
- * only supported on P8NVL due to the above mentioned limitation of
- * CAPP DMA mode and therefore does not need to worry about this. If the
- * issue with CAPP DMA mode is later worked around on P8 we might need
- * to revisit this.
- */
-
- return true;
-}
-EXPORT_SYMBOL_GPL(cxl_slot_is_supported);
-
-
static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct cxl *adapter;
@@ -2086,9 +1777,6 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev_err(&dev->dev, "AFU %i failed to start: %i\n", slice, rc);
}
- if (pnv_pci_on_cxl_phb(dev) && adapter->slices >= 1)
- pnv_cxl_phb_set_peer_afu(dev, adapter->afu[0]);
-
return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 11:57:21 +0000